diff options
Diffstat (limited to 'source4/Makefile.in')
| -rw-r--r-- | source4/Makefile.in | 589 |
1 files changed, 0 insertions, 589 deletions
diff --git a/source4/Makefile.in b/source4/Makefile.in deleted file mode 100644 index bf7b1d4895..0000000000 --- a/source4/Makefile.in +++ /dev/null @@ -1,589 +0,0 @@ -######################################################################### -# Makefile.in for Samba - rewritten for autoconf support -# Copyright Andrew Tridgell 1992-2003 -# Copyright (C) 2001 by Martin Pool <mbp@samba.org> -# Copyright (C) 2002 Andrew Bartlett <abartlet@samba.org> -# Copyright (C) 2003 Anthony Liguori <aliguor@us.ibm.com> -# Copyright (C) 2003 James Myers <myersjj@samba.org> -# Copyright (C) 2002-2003 Jelmer Vernooij <jelmer@samba.org> -# Copyright (C) 2004 Stefan Metzmacher <metze@samba.org> -########################################################################### - -prefix=@prefix@ -exec_prefix=@exec_prefix@ - -LIBS=@LIBS@ @LDAP_LIBS@ @KRB5_LIBS@ @LIBPOPT_LIBS@ -CC=@CC@ -SHLD=@SHLD@ -CFLAGS=@CFLAGS@ -CPPFLAGS=@CPPFLAGS@ -LDFLAGS=@LDFLAGS@ -LDSHFLAGS=@LDSHFLAGS@ @LDFLAGS@ @CFLAGS@ -PERL=@PERL@ -DYNEXP=@DYNEXP@ - -VPATH=@srcdir@ -srcdir=@srcdir@ -builddir=@builddir@ -SHELL=/bin/sh - -BASEDIR= @prefix@ -BINDIR = @bindir@ -SBINDIR = @sbindir@ -LIBDIR = @libdir@ -CONFIGDIR = @configdir@ -VARDIR = @localstatedir@ - -# The permissions to give the executables -INSTALLPERMS = 0755 - -# set these to where to find various files -# These can be overridden by command line switches (see smbd(8)) -# or in smb.conf (see smb.conf(5)) -LOGFILEBASE = @logfilebase@ -CONFIGFILE = $(CONFIGDIR)/smb.conf -LMHOSTSFILE = $(CONFIGDIR)/lmhosts - -# This is where smbpasswd et al go -PRIVATEDIR = @privatedir@ -SMB_PASSWD_FILE = $(PRIVATEDIR)/smbpasswd - -# the directory where lock files go -LOCKDIR = @lockdir@ - -# the directory where pid files go -PIDDIR = @piddir@ - -FLAGS = $(CFLAGS) -Iinclude -I$(srcdir)/include $(CPPFLAGS) -I. -I$(srcdir) -Ilib -FLAGS32 = - -PASSWD_FLAGS = -DSMB_PASSWD_FILE=\"$(SMB_PASSWD_FILE)\" -DPRIVATE_DIR=\"$(PRIVATEDIR)\" -PATH_FLAGS1 = -DCONFIGFILE=\"$(CONFIGFILE)\" -DSBINDIR=\"$(SBINDIR)\" -PATH_FLAGS2 = $(PATH_FLAGS1) -DBINDIR=\"$(BINDIR)\" -PATH_FLAGS3 = $(PATH_FLAGS2) -DLMHOSTSFILE=\"$(LMHOSTSFILE)\" -PATH_FLAGS4 = $(PATH_FLAGS3) -DLOCKDIR=\"$(LOCKDIR)\" -DPIDDIR=\"$(PIDDIR)\" -PATH_FLAGS5 = $(PATH_FLAGS4) -DLIBDIR=\"$(LIBDIR)\" \ - -DLOGFILEBASE=\"$(LOGFILEBASE)\" -DSHLIBEXT=\"@SHLIBEXT@\" -PATH_FLAGS6 = $(PATH_FLAGS5) -DCONFIGDIR=\"$(CONFIGDIR)\" -PATH_FLAGS = $(PATH_FLAGS6) $(PASSWD_FLAGS) - -# Note that all executable programs now provide for an optional executable suffix. - -SBIN_PROGS = bin/smbd@EXEEXT@ - -BIN_PROGS = bin/smbclient@EXEEXT@ - -TORTURE_PROGS = bin/smbtorture@EXEEXT@ \ - bin/gentest@EXEEXT@ \ - bin/locktest@EXEEXT@ \ - bin/masktest@EXEEXT@ \ - bin/ndrdump@EXEEXT@ - -LDB_PROGS = bin/ldbadd bin/ldbdel bin/ldbmodify bin/ldbedit bin/ldbsearch -REG_PROGS = bin/regpatch bin/regshell bin/regtree bin/regpatch bin/regdiff - -CHARSET_MODULES = @CHARSET_MODULES@ -CHARSET_LIBDIR = $(LIBDIR)/charset -DCERPC_MODULES = @DCERPC_MODULES@ -DCERPC_LIBDIR = $(LIBDIR)/dcerpc -NTVFS_MODULES = @NTVFS_MODULES@ -NTVFS_LIBDIR = $(LIBDIR)/ntvfs - -MODULES = $(CHARSET_MODULES) $(DCERPC_MODULES) $(NTVFS_MODULES) - -###################################################################### -# object file lists -###################################################################### - -CHARSET_OBJS = @CHARSET_OBJS@ - -LIBLDB_LDAP_OBJS = @LIBLDB_LDAP_OBJS@ -LIBLDB_OBJS = @LIBLDB_OBJS@ - -LIBBASIC_OBJS = @LIBBASIC_OBJS@ -LIBBASIC_LIBS = @LIBBASIC_LIBS@ $(LIBS) - -LIBCLI_RAW_OBJS = @LIBCLI_RAW_OBJS@ -LIBCLI_UTILS_OBJS = @LIBCLI_UTILS_OBJS@ -LIBCLI_NMB_OBJS = @LIBCLI_NMB_OBJS@ -LIBCLI_AUTH_OBJS = @LIBCLI_AUTH_OBJS@ -LIBCLI_OBJS = @LIBCLI_OBJS@ - -LIBNDR_RAW_OBJS = @LIBNDR_RAW_OBJS@ -LIBRPC_RAW_OBJS = @LIBRPC_RAW_OBJS@ -LIBRPC_OBJS = @LIBRPC_OBJS@ -LIBRPC_CLIENT_OBJS = @LIBRPC_CLIENT_OBJS@ - -LIBSMB_OBJS = @LIBSMB_OBJS@ -LIBSMB_LIBS = @LIBSMB_LIBS@ - -LIBPOPT_OBJS = @LIBPOPT_OBJS@ -LIBPOPT_LIBS = @LIBPOPT_LIBS@ - -LIBCMDLINE_OBJS = @LIBCMDLINE_OBJS@ $(LIBPOPT_OBJS) -LIBCMDLINE_LIBS = @LIBCMDLINE_LIBS@ $(LIBPOPT_LIBS) - -CONFIG_OBJS = @CONFIG_OBJS@ -CONFIG_LIBS = @CONFIG_LIBS@ - -PROCESS_MODEL_OBJS = @PROCESS_MODEL_OBJS@ -PROCESS_MODEL_LIBS = @PROCESS_MODEL_LIBS@ - -SMB_OBJS = @SMB_OBJS@ -SMB_LIBS = @SMB_LIBS@ - -AUTH_OBJS = @AUTH_OBJS@ -AUTH_LIBS = @AUTH_LIBS@ - -PASSDB_OBJS = @PASSDB_OBJS@ -PASSDB_LIBS = @PASSDB_LIBS@ - -NTVFS_OBJS = @NTVFS_OBJS@ -NTVFS_LIBS = @NTVFS_LIBS@ - -DCERPC_OBJS = @DCERPC_OBJS@ -DCERPC_LIBS = @DCERPC_LIBS@ - -REG_OBJS = @REG_OBJS@ -REG_LIBS = @REG_LIBS@ - -GTK_OBJS = -GTK_LIBS = @GTK_LIBS@ - -LIBLDB_OBJS = @LIBLDB_OBJS@ - -LDBADD_OBJS = @LDBADD_OBJS@ -LDBADD_LIBS = $(CONFIG_LIBS) $(LIBSMB_LIBS) $(LIBBASIC_LIBS) - -LDBDEL_OBJS = @LDBDEL_OBJS@ -LDBDEL_LIBS = $(CONFIG_LIBS) $(LIBSMB_LIBS) $(LIBBASIC_LIBS) - -LDBMODIFY_OBJS = @LDBMODIFY_OBJS@ -LDBMODIFY_LIBS = $(CONFIG_LIBS) $(LIBSMB_LIBS) $(LIBBASIC_LIBS) - -LDBSEARCH_OBJS = @LDBSEARCH_OBJS@ -LDBSEARCH_LIBS = $(CONFIG_LIBS) $(LIBSMB_LIBS) $(LIBBASIC_LIBS) - -LDBEDIT_OBJS = @LDBEDIT_OBJS@ -LDBEDIT_LIBS = $(CONFIG_LIBS) $(LIBSMB_LIBS) $(LIBBASIC_LIBS) - -TORTURE_RAW_OBJS = @TORTURE_RAW_OBJS@ - -TORTURE_RPC_OBJS = @TORTURE_RPC_OBJS@ - -TORTURE_NBENCH_OBJS = @TORTURE_NBENCH_OBJS@ - -TORTURE_BASIC_OBJS = @TORTURE_BASIC_OBJS@ - -DCERPC_COMMON_OBJS = @DCERPC_COMMON_OBJS@ - -TORTURE_OBJS = @TORTURE_OBJS@ -TORTURE_LIBS = @TORTURE_LIBS@ - -CLIENT_OBJS = client/client.o client/clitar.o libcli/raw/clirewrite.o -CLIENT_LIBS = - -SERVER_OBJS = smbd/server.o smbd/process.o \ - lib/server_mutex.o \ - smbd/build_options.o \ - smbd/rewrite.o -SERVER_LIBS = - -SMBD_OBJS = $(SERVER_OBJS) $(PROCESS_MODEL_OBJS) \ - $(DCERPC_OBJS) $(SMB_OBJS) $(AUTH_OBJS) $(PASSDB_OBJS) $(NTVFS_OBJS) \ - $(LIBBASIC_OBJS) $(CONFIG_OBJS) $(LIBCMDLINE_OBJS) $(LIBSMB_OBJS) \ - $(LIBLDB_OBJS) -SMBD_LIBS = $(SERVER_LIBS) $(PROCESS_MODEL_LIBS) \ - $(DCERPC_LIBS) $(SMB_LIBS) $(AUTH_LIBS) $(PASSDB_LIBS) $(NTVFS_LIBS) \ - $(LIBBASIC_LIBS) $(CONFIG_LIBS) $(LIBCMDLINE_LIBS) $(LIBSMB_LIBS) - -SMBCLIENT_OBJS = $(CLIENT_OBJS) $(LIBSMB_OBJS) $(CONFIG_OBJS) $(LIBBASIC_OBJS) $(LIBCMDLINE_OBJS) -SMBCLIENT_LIBS = $(CLIENT_LIBS) $(LIBSMB_LIBS) $(CONFIG_LIBS) $(LIBBASIC_LIBS) $(LIBCMDLINE_LIBS) - -SMBTORTURE_OBJS = $(TORTURE_OBJS) $(CONFIG_OBJS) $(LIBSMB_OBJS) $(LIBBASIC_OBJS) -SMBTORTURE_LIBS = $(TORTURE_LIBS) $(CONFIG_LIBS) $(LIBSMB_LIBS) $(LIBBASIC_LIBS) - -GENTEST_OBJS = torture/gentest.o torture/torture_util.o libcli/raw/clirewrite.o \ - $(LIBSMB_OBJS) $(CONFIG_OBJS) $(LIBBASIC_OBJS) -GENTEST_LIBS = $(LIBSMB_LIBS) $(CONFIG_LIBS) $(LIBBASIC_LIBS) - -MASKTEST_OBJS = torture/masktest.o libcli/raw/clirewrite.o \ - $(LIBSMB_OBJS) $(CONFIG_OBJS) $(LIBBASIC_OBJS) -MASKTEST_LIBS = $(LIBSMB_LIBS) $(CONFIG_LIBS) $(LIBBASIC_LIBS) - -LOCKTEST_OBJS = torture/locktest.o libcli/raw/clirewrite.o \ - $(LIBSMB_OBJS) $(CONFIG_OBJS) $(LIBBASIC_OBJS) -LOCKTEST_LIBS = $(LIBSMB_LIBS) $(CONFIG_LIBS) $(LIBBASIC_LIBS) - -NDRDUMP_OBJS = utils/ndrdump.o utils/rewrite.o \ - $(LIBSMB_OBJS) $(CONFIG_OBJS) $(LIBBASIC_OBJS) -NDRDUMP_LIBS = $(LIBSMB_LIBS) $(CONFIG_LIBS) $(LIBBASIC_LIBS) - -REGTREE_OBJS = lib/registry/tools/regtree.o \ - $(REG_OBJS) $(LIBBASIC_OBJS) $(CONFIG_OBJS) $(LIBCMDLINE_OBJS) $(LIBSMB_OBJS) -REGTREE_LIBS = $(REG_LIBS) $(LIBBASIC_LIBS) $(CONFIG_LIBS) $(LIBCMDLINE_LIBS) $(LIBSMB_LIBS) - -GREGEDIT_OBJS = lib/registry/tools/gregedit.o \ - $(REG_OBJS) $(LIBBASIC_OBJS) $(CONFIG_OBJS) $(LIBCMDLINE_OBJS) $(LIBSMB_OBJS) $(GTK_OBJS) -GREGEDIT_LIBS = $(REG_LIBS) $(LIBBASIC_LIBS) $(CONFIG_LIBS) $(LIBCMDLINE_LIBS) $(LIBSMB_LIBS) $(GTK_LIBS) - -REGSHELL_OBJS = lib/registry/tools/regshell.o \ - $(REG_OBJS) $(LIBBASIC_OBJS) $(CONFIG_OBJS) $(LIBCMDLINE_OBJS) $(LIBSMB_OBJS) -REGSHELL_LIBS = $(REG_LIBS) $(LIBBASIC_LIBS) $(CONFIG_LIBS) $(LIBCMDLINE_LIBS) $(LIBSMB_LIBS) - -REGPATCH_OBJS = lib/registry/tools/regpatch.o \ - $(REG_OBJS) $(LIBBASIC_OBJS) $(CONFIG_OBJS) $(LIBCMDLINE_OBJS) $(LIBSMB_OBJS) -REGPATCH_LIBS = $(REG_LIBS) $(LIBBASIC_LIBS) $(CONFIG_LIBS) $(LIBCMDLINE_LIBS) $(LIBSMB_LIBS) - -REGDIFF_OBJS = lib/registry/tools/regdiff.o \ - $(REG_OBJS) $(LIBBASIC_OBJS) $(CONFIG_OBJS) $(LIBCMDLINE_OBJS) $(LIBSMB_OBJS) -REGDIFF_LIBS = $(REG_LIBS) $(LIBBASIC_LIBS) $(CONFIG_LIBS) $(LIBCMDLINE_LIBS) $(LIBSMB_LIBS) - -PROTO_OBJ = $(SERVER_OBJS) $(PROCESS_MODEL_OBJS) $(CLIENT_OBJS) $(TORTURE_OBJS) \ - $(DCERPC_OBJS) $(SMB_OBJS) $(AUTH_OBJS) $(PASSDB_OBJS) $(NTVFS_OBJS) \ - $(LIBBASIC_OBJS) $(LIBLDB_OBJS) $(CONFIG_OBJS) $(LIBCMDLINE_OBJS) $(LIBSMB_OBJS) $(REG_OBJS) - -default: all - -# Swig extensions - -PYTHON_TDB_OBJ = lib/tdb/tdb.o lib/tdb/spinlock.o -PYTHON_TDB_PICOBJ = $(PYTHON_TDB_OBJ:.o=.po) - -swig: scripting/swig/python/_tdb.so - -swig_clean: - rm -f scripting/swig/python/_tdb.so scripting/swig/python/tdb.pyc \ - scripting/swig/python/tdb.py scripting/swig/python/tdb_wrap.c \ - scripting/swig/python/tdb_wrap.po - -scripting/swig/python/tdb.py: scripting/swig/tdb.i - swig -python scripting/swig/tdb.i - mv scripting/swig/tdb.py scripting/swig/python - mv scripting/swig/tdb_wrap.c scripting/swig/python - -scripting/swig/python/_tdb.so: scripting/swig/python/tdb.py scripting/swig/python/tdb_wrap.po $(PYTHON_TDB_PICOBJ) - $(SHLD) $(LDSHFLAGS) -o scripting/swig/python/_tdb.so scripting/swig/python/tdb_wrap.po \ - $(PYTHON_TDB_PICOBJ) - -###################################################################### -# now the rules... -###################################################################### -all: SHOWFLAGS $(SBIN_PROGS) $(BIN_PROGS) $(TORTURE_PROGS) $(LDB_PROGS) $(REG_PROGS) $(MODULES) - -torture : SHOWFLAGS $(TORTURE_PROGS) - -smbtorture : SHOWFLAGS bin/smbtorture@EXEEXT@ - -gentest: SHOWFLAGS bin/gentest@EXEEXT@ - -masktest : SHOWFLAGS bin/masktest@EXEEXT@ - -locktest : SHOWFLAGS bin/locktest@EXEEXT@ - -modules: SHOWFLAGS proto_exists $(MODULES) - -everything: all - -.SUFFIXES: -.SUFFIXES: .c .o .po .po32 .lo - -SHOWFLAGS: basics - @echo "Using FLAGS = $(FLAGS)" - @echo " FLAGS32 = $(FLAGS32)" - @echo " LIBS = $(LIBS)" - @echo " LDSHFLAGS = $(LDSHFLAGS)" - @echo " LDFLAGS = $(LDFLAGS)" - -MAKEDIR = || exec false; \ - if test -d "$$dir"; then :; else \ - echo mkdir "$$dir"; \ - mkdir -p "$$dir" >/dev/null 2>&1 || \ - test -d "$$dir" || \ - mkdir "$$dir" || \ - exec false; fi || exec false - -.c.o: - @echo Compiling $*.c - @$(CC) -I. -I$(srcdir) $(FLAGS) -c $< \ - -o $@ -@BROKEN_CC@ -mv `echo $@ | sed 's%^.*/%%g'` $@ - -# 'make pch' is extremely useful for fast compiles if you have gcc-3.4 -pch: pch_clean basics - $(CC) -I. -I$(srcdir) $(FLAGS) -c $(srcdir)/include/includes.h -o $(srcdir)/include/includes.h.gch - -pch_clean: - rm -f $(srcdir)/include/includes.h.gch - -idl_full: build/pidl/idl.pm - CPP="@CPP@" script/build_idl.sh FULL - -idl: build/pidl/idl.pm - @CPP="@CPP@" script/build_idl.sh - -basics: idl proto_test - -build/pidl/idl.pm: build/pidl/idl.yp - -yapp -s build/pidl/idl.yp - -# These dependencies are only approximately correct: we want to make -# sure Samba's paths are updated if ./configure is re-run. Really it -# would be nice if "make prefix=/opt/samba all" also rebuilt things, -# but since we also require "make install prefix=/opt/samba" *not* to -# rebuild it's a bit hard. - -dynconfig.o: dynconfig.c Makefile - @echo Compiling $*.c - @$(CC) $(FLAGS) $(PATH_FLAGS) -c $< -o $@ - -dynconfig.po: dynconfig.c Makefile - @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \ - dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi - @echo Compiling $*.c with @PICFLAG@ - @$(CC) -I. -I$(srcdir) $(FLAGS) $(PATH_FLAGS) @PICFLAG@ -c $< -o $*.@PICSUFFIX@ -@BROKEN_CC@ -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@ -@POBAD_CC@ @mv $*.po.o $@ - -lib/version.o: lib/version.c include/version.h - @echo Compiling $*.c - @$(CC) -I. -I$(srcdir) $(FLAGS) $(PATH_FLAGS) -c $< -o $@ - -lib/version.po: lib/version.c include/version.h - @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \ - dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi - @echo Compiling $*.c with @PICFLAG@ - @$(CC) -I. -I$(srcdir) $(FLAGS) $(PATH_FLAGS) @PICFLAG@ -c $< -o $*.@PICSUFFIX@ -@BROKEN_CC@ -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@ -@POBAD_CC@ @mv $*.po.o $@ - -.c.po: - @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \ - dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi - @echo Compiling $*.c with @PICFLAG@ - @$(CC) -I. -I$(srcdir) $(FLAGS) @PICFLAG@ -c $< -o $*.@PICSUFFIX@ -@BROKEN_CC@ -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@ -@POBAD_CC@ @mv $*.po.o $@ - -# this is for IRIX -.c.po32: - @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \ - dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi - @echo Compiling $*.c with @PICFLAG@ and -32 - @$(CC) -32 -I. -I$(srcdir) $(FLAGS32) $(PATH_FLAGS) @PICFLAG@ -c $< \ - -o $*.po32.o -@BROKEN_CC@ -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po32$$%.o%'` $@.o - @mv $*.po32.o $@ - -bin/.dummy: - @if (: >> $@ || : > $@) >/dev/null 2>&1; then :; else \ - dir=bin $(MAKEDIR); fi - @: >> $@ || : > $@ # what a fancy emoticon! - -bin/smbd@EXEEXT@: $(SMBD_OBJS) bin/.dummy - @echo Linking $@ - @$(CC) $(FLAGS) -o $@ $(SMBD_OBJS) $(LDFLAGS) $(DYNEXP) $(SMBD_LIBS) - -bin/smbclient@EXEEXT@: $(SMBCLIENT_OBJS) bin/.dummy - @echo Linking $@ - @$(CC) $(FLAGS) -o $@ $(SMBCLIENT_OBJS) $(LDFLAGS) $(SMBCLIENT_LIBS) - -bin/smbtorture@EXEEXT@: $(SMBTORTURE_OBJS) bin/.dummy - @echo Linking $@ - @$(CC) $(FLAGS) -o $@ $(SMBTORTURE_OBJS) $(LDFLAGS) $(SMBTORTURE_LIBS) - -bin/ldbadd@EXEEXT@: $(LDBADD_OBJS) bin/.dummy - @echo Linking $@ - @$(CC) $(FLAGS) -o $@ $(LDBADD_OBJS) $(LDFLAGS) $(LDBADD_LIBS) - -bin/ldbdel@EXEEXT@: $(LDBDEL_OBJS) bin/.dummy - @echo Linking $@ - @$(CC) $(FLAGS) -o $@ $(LDBDEL_OBJS) $(LDFLAGS) $(LDBADD_LIBS) - -bin/ldbmodify@EXEEXT@: $(LDBMODIFY_OBJS) bin/.dummy - @echo Linking $@ - @$(CC) $(FLAGS) -o $@ $(LDBMODIFY_OBJS) $(LDFLAGS) $(LDBADD_LIBS) - -bin/ldbsearch@EXEEXT@: $(LDBSEARCH_OBJS) bin/.dummy - @echo Linking $@ - @$(CC) $(FLAGS) -o $@ $(LDBSEARCH_OBJS) $(LDFLAGS) $(LDBADD_LIBS) - -bin/ldbedit@EXEEXT@: $(LDBEDIT_OBJS) bin/.dummy - @echo Linking $@ - @$(CC) $(FLAGS) -o $@ $(LDBEDIT_OBJS) $(LDFLAGS) $(LDBADD_LIBS) - -bin/ndrdump@EXEEXT@: $(NDRDUMP_OBJS) bin/.dummy - @echo Linking $@ - @$(CC) $(FLAGS) -o $@ $(NDRDUMP_OBJS) $(LDFLAGS) $(NDRDUMP_LIBS) - -bin/gentest@EXEEXT@: $(GENTEST_OBJS) bin/.dummy - @echo Linking $@ - @$(CC) $(FLAGS) -o $@ $(GENTEST_OBJS) $(LDFLAGS) $(GENTEST_LIBS) - -bin/masktest@EXEEXT@: $(MASKTEST_OBJS) bin/.dummy - @echo Linking $@ - @$(CC) $(FLAGS) -o $@ $(MASKTEST_OBJS) $(LDFLAGS) $(MASKTEST_LIBS) - -bin/locktest@EXEEXT@: $(LOCKTEST_OBJS) bin/.dummy - @echo Linking $@ - @$(CC) $(FLAGS) -o $@ $(LOCKTEST_OBJS) $(LDFLAGS) $(LOCKTEST_LIBS) - - -bin/regshell@EXEEXT@: $(REGSHELL_OBJS) bin/.dummy - @echo Linking $@ - @$(CC) $(FLAGS) -o $@ $(REGSHELL_OBJS) $(LDFLAGS) $(REGSHELL_LIBS) - -bin/regtree@EXEEXT@: $(REGTREE_OBJS) bin/.dummy - @echo Linking $@ - @$(CC) $(FLAGS) -o $@ $(REGTREE_OBJS) $(LDFLAGS) $(REGTREE_LIBS) - -bin/gregedit@EXEEXT@: $(GREGEDIT_OBJS) bin/.dummy - @echo Linking $@ - @$(CC) $(FLGS) -o $@ $(GREGEDIT_OBJS) $(LDFLAGS) $(GREGEDIT_LIBS) - -bin/regpatch@EXEEXT@: $(REGPATCH_OBJS) bin/.dummy - @echo Linking $@ - @$(CC) $(FLAGS) -o $@ $(REGPATCH_OBJS) $(LDFLAGS) $(REGPATCH_LIBS) - -bin/regdiff@EXEEXT@: $(REGDIFF_OBJS) bin/.dummy - @echo Linking $@ - @$(CC) $(FLAGS) -o $@ $(REGDIFF_OBJS) $(LDFLAGS) $(REGDIFF_LIBS) - -install: installbin installtorture installldb installreg installdat - -# DESTDIR is used here to prevent packagers wasting their time -# duplicating the Makefile. Remove it and you will have the privelege -# of package each samba release for muliple versions of multiple -# distributions and operating systems, or at least supplying patches -# to all the packaging files required for this, prior to committing -# the removal of DESTDIR. Do not remove it even though you think it -# is not used - -installdirs: - @$(SHELL) $(srcdir)/script/installdirs.sh $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(PRIVATEDIR) $(DESTDIR)$(PIDDIR) $(DESTDIR)$(LOCKDIR) - @$(SHELL) $(srcdir)/script/installdirs.sh $(DESTDIR)$(BASEDIR) $(DESTDIR)$(CHARSET_LIBDIR) $(DESTDIR)$(DCERPC_LIBDIR) $(DESTDIR)$(NTVFS_LIBDIR) - -installservers: all installdirs - @$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(SBIN_PROGS) - -installbin: all installdirs - @$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(SBIN_PROGS) - @$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(BIN_PROGS) - -installtorture: all installdirs - @$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(TORTURE_PROGS) - -installldb: all installdirs - @$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(LDB_PROGS) - -installreg: all installdirs - @$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(REG_PROGS) - -installmodules: all installdirs - @$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(NTVFS_LIBDIR) $(NTVFS_MODULES) - @$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(DCERPC_LIBDIR) $(DCERPC_MODULES) - @$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(CHARSET_LIBDIR) $(CHARSET_MODULES) - -installdat: installdirs - @$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR)$(LIBDIR) $(srcdir) - -# revert to the previously installed version -revert: - @$(SHELL) $(srcdir)/script/revert.sh $(SBINDIR) $(SBIN_PROGS) - -.PHONY: showlayout - -showlayout: - @echo "Samba will be installed into:" - @echo " basedir: $(BASEDIR)" - @echo " bindir: $(BINDIR)" - @echo " sbindir: $(SBINDIR)" - @echo " libdir: $(LIBDIR)" - @echo " vardir: $(VARDIR)" - -uninstall: uninstallbin uninstalltorture uninstallldb uninstallreg - -uninstallbin: - @$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(SBIN_PROGS) - @$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(BIN_PROGS) - -uninstalltorture: - @$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(TORTURE_PROGS) - -uninstallldb: - @$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(LDB_PROGS) - -uninstallreg: - @$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(REG_PROGS) - -uninstallmodules: - @$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(NTVFS_LIBDIR) $(DESTDIR)$(NTVFS_MODULES) - @$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(DCERPC_LIBDIR) $(DESTDIR)$(DCERPC_MODULES) - @$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(CHARSET_LIBDIR) $(DESTDIR)$(CHARSET_MODULES) - -# Toplevel clean files -TOPFILES=dynconfig.o dynconfig.po - -clean: delheaders - -rm -f core */*~ *~ */*.o */*/*.o */*/*/*.o */*/*.po */*/*.po32 */*.po */*.po32 */*.@SHLIBEXT@ \ - $(TOPFILES) $(BIN_PROGS) $(SBIN_PROGS) $(MODULES) $(TORTURE_PROGS) \ - .headers.stamp - -rm -rf librpc/gen_* - -# Making this target will just make sure that the prototype files -# exist, not necessarily that they are up to date. Since they're -# removed by "make clean" this will always be run when you do anything -# afterwards. -proto_exists: include/proto.h include/build_env.h - -delheaders: pch_clean - @/bin/rm -f $(srcdir)/include/proto.h $(srcdir)/include/build_env.h - -include/proto.h: - @cd $(srcdir) && $(SHELL) script/mkproto.sh $(PERL) \ - -h _PROTO_H_ $(builddir)/include/proto.h \ - $(PROTO_OBJ) - -include/build_env.h: - @echo Building include/build_env.h - @cd $(srcdir) && $(SHELL) script/build_env.sh $(srcdir) $(builddir) $(CC) > $(builddir)/include/build_env.h - -# "make headers" or "make proto" calls a subshell because we need to -# make sure these commands are executed in sequence even for a -# parallel make. -headers: delheaders include/proto.h include/build_env.h - -proto: idl headers - -proto_test: - @[ -f include/proto.h ] || $(MAKE) proto - -.PHONY: headers proto - -etags: - etags `find $(srcdir) -name "*.[ch]" | grep -v /CVS/` - -ctags: - ctags `find $(srcdir) -name "*.[ch]" | grep -v /CVS/` - -realclean: clean delheaders - -rm -f config.log bin/.dummy - -distclean: realclean - -rm -f include/config.h Makefile - -rm -f config.status config.cache - -realdistclean: distclean - -rm -f include/config.h.in - -rm -f lib/version.h - -rm -f configure - -# when configure.in is updated, reconfigure -$(srcdir)/configure: $(srcdir)/configure.in - @echo "WARNING: you need to rerun ./autogen.sh" - -config.status: $(srcdir)/configure - @echo "WARNING: you need to run configure" - -Makefile: $(srcdir)/Makefile.in config.status smb_server/config.m4 - @echo "WARNING: you need to run ./config.status" |