1 files changed, 226 insertions, 0 deletions
diff --git a/source4/include/local.h b/source4/include/local.h
new file mode 100644
index 0000000000..4515bd83e0
--- /dev/null
+++ b/source4/include/local.h
@@ -0,0 +1,226 @@
+/* Copyright (C) 1995-1998 Samba-Team */
+/* Copyright (C) 1998 John H Terpstra <jht@aquasoft.com.au> */
+
+/* local definitions for file server */
+#ifndef _LOCAL_H
+#define _LOCAL_H
+
+/* The default workgroup - usually overridden in smb.conf */
+#ifndef DEFAULT_WORKGROUP
+#define DEFAULT_WORKGROUP "WORKGROUP"
+#endif
+
+/* the maximum debug level to compile into the code. This assumes a good 
+   optimising compiler that can remove unused code 
+   for embedded or low-memory systems set this to a value like 2 to get
+   only important messages. This gives *much* smaller binaries
+*/
+#ifndef MAX_DEBUG_LEVEL
+#define MAX_DEBUG_LEVEL 1000
+#endif
+
+/* This defines the section name in the configuration file that will contain */
+/* global parameters - that is, parameters relating to the whole server, not */
+/* just services. This name is then reserved, and may not be used as a       */
+/* a service name. It will default to "global" if not defined here.          */
+#define GLOBAL_NAME "global"
+#define GLOBAL_NAME2 "globals"
+
+/* This defines the section name in the configuration file that will
+   refer to the special "homes" service */
+#define HOMES_NAME "homes"
+
+/* This defines the section name in the configuration file that will
+   refer to the special "printers" service */
+#define PRINTERS_NAME "printers"
+
+/* Yves Gaige <yvesg@hptnodur.grenoble.hp.com> requested this set this 	     */
+/* to a maximum of 8 if old smb clients break because of long printer names. */
+#define MAXPRINTERLEN 15
+
+/* max number of directories open at once */
+/* note that with the new directory code this no longer requires a
+   file handle per directory, but large numbers do use more memory */
+#define MAX_OPEN_DIRECTORIES 256
+
+/* max number of directory handles */
+/* As this now uses the bitmap code this can be
+   quite large. */
+#define MAX_DIRECTORY_HANDLES 2048
+
+/* maximum number of file caches per smbd */
+#define MAX_WRITE_CACHES 10
+
+/* define what facility to use for syslog */
+#ifndef SYSLOG_FACILITY
+#define SYSLOG_FACILITY LOG_DAEMON
+#endif
+
+/* 
+ * Default number of maximum open files per smbd. This is
+ * also limited by the maximum available file descriptors
+ * per process and can also be set in smb.conf as "max open files"
+ * in the [global] section.
+ */
+
+#ifndef MAX_OPEN_FILES
+#define MAX_OPEN_FILES 10000
+#endif
+ 
+#define WORDMAX 0xFFFF
+
+/* the maximum password length before we declare a likely attack */
+#define MAX_PASS_LEN 200
+
+/* separators for lists */
+#define LIST_SEP " \t,;\n\r"
+
+/* wchar separators for lists */
+#define LIST_SEP_W wchar_list_sep
+
+/* this is where browse lists are kept in the lock dir */
+#define SERVER_LIST "browse.dat"
+
+/* shall filenames with illegal chars in them get mangled in long
+   filename listings? */
+#define MANGLE_LONG_FILENAMES 
+
+/* define this if you want to stop spoofing with .. and soft links
+   NOTE: This also slows down the server considerably */
+#define REDUCE_PATHS
+
+/* the size of the directory cache */
+#define DIRCACHESIZE 20
+
+/* what default type of filesystem do we want this to show up as in a
+   NT file manager window? */
+#define FSTYPE_STRING "NTFS"
+
+/* the default guest account - normally set in the Makefile or smb.conf */
+#ifndef GUEST_ACCOUNT
+#define GUEST_ACCOUNT "nobody"
+#endif
+
+/* user to test password server with as invalid in security=server mode. */
+#ifndef INVALID_USER_PREFIX
+#define INVALID_USER_PREFIX "sambatest"
+#endif
+
+/* the default pager to use for the client "more" command. Users can
+   override this with the PAGER environment variable */
+#ifndef PAGER
+#define PAGER "more"
+#endif
+
+/* the size of the uid cache used to reduce valid user checks */
+#define VUID_CACHE_SIZE 32
+
+/* the following control timings of various actions. Don't change 
+   them unless you know what you are doing. These are all in seconds */
+#define DEFAULT_SMBD_TIMEOUT (60*60*24*7)
+#define SMBD_RELOAD_CHECK (180)
+#define IDLE_CLOSED_TIMEOUT (60)
+#define DPTR_IDLE_TIMEOUT (120)
+#define SMBD_SELECT_TIMEOUT (60)
+#define NMBD_SELECT_LOOP (10)
+#define BROWSE_INTERVAL (60)
+#define REGISTRATION_INTERVAL (10*60)
+#define NMBD_INETD_TIMEOUT (120)
+#define NMBD_MAX_TTL (24*60*60)
+#define LPQ_LOCK_TIMEOUT (5)
+#define NMBD_INTERFACES_RELOAD (120)
+#define NMBD_UNEXPECTED_TIMEOUT (15)
+
+/* the following are in milliseconds */
+#define LOCK_RETRY_TIMEOUT (100)
+
+/* do you want to dump core (carefully!) when an internal error is
+   encountered? Samba will be careful to make the core file only
+   accessible to root */
+#define DUMP_CORE 1
+
+/* shall we support browse requests via a FIFO to nmbd? */
+#define ENABLE_FIFO 1
+
+/* how long (in miliseconds) to wait for a socket connect to happen */
+#define LONG_CONNECT_TIMEOUT 30000
+#define SHORT_CONNECT_TIMEOUT 5000
+
+/* the default netbios keepalive timeout */
+#define DEFAULT_KEEPALIVE 300
+
+/* the directory to sit in when idle */
+/* #define IDLE_DIR "/" */
+
+/* Timout (in seconds) to wait for an oplock break
+   message to return from the client. */
+
+#define OPLOCK_BREAK_TIMEOUT 30
+
+/* Timout (in seconds) to add to the oplock break timeout
+   to wait for the smbd to smbd message to return. */
+
+#define OPLOCK_BREAK_TIMEOUT_FUDGEFACTOR 2
+
+/* the read preciction code has been disabled until some problems with
+   it are worked out */
+#define USE_READ_PREDICTION 0
+
+/*
+ * Default passwd chat script.
+ */
+
+#define DEFAULT_PASSWD_CHAT "*new*password* %n\\n *new*password* %n\\n *changed*"
+
+/* Minimum length of allowed password when changing UNIX password. */
+#define MINPASSWDLENGTH 5
+
+/* maximum ID number used for session control. This cannot be larger
+   than 62*62 for the current code */
+#define MAX_SESSION_ID 3000
+
+/* For the benifit of PAM and the 'session exec' scripts, we fake up a terminal
+   name. This can be in one of two forms:  The first for systems not using
+   utmp (and therefore not constrained as to length or the need for a number
+   < 3000 or so) and the second for systems with this 'well behaved terminal
+   like name' constraint.
+*/
+
+#ifndef SESSION_TEMPLATE
+/* Paramaters are 'pid' and 'vuid' */
+#define SESSION_TEMPLATE "smb/%lu/%d"
+#endif
+
+#ifndef SESSION_UTMP_TEMPLATE
+#define SESSION_UTMP_TEMPLATE "smb/%d"
+#endif
+
+/* the maximum age in seconds of a password. Should be a lp_ parameter */
+#define MAX_PASSWORD_AGE (21*24*60*60)
+
+/* Allocation roundup. */
+#define SMB_ROUNDUP_ALLOCATION_SIZE 0x100000
+
+/* shall we deny oplocks to clients that get timeouts? */
+#define FASCIST_OPLOCK_BACKOFF 1
+
+/* this enables the "rabbit pellet" fix for SMBwritebraw */
+#define RABBIT_PELLET_FIX 1
+
+/* Max number of jobs per print queue. */
+#define PRINT_MAX_JOBID 10000
+
+/* Max number of open RPC pipes. */
+#define MAX_OPEN_PIPES 2048
+
+/* Tuning for server auth mutex. */
+#define CLI_AUTH_TIMEOUT 5000 /* In milli-seconds. */
+#define NUM_CLI_AUTH_CONNECT_RETRIES 3
+/* Number in seconds to wait for the mutex. This must be less than 30 seconds. */
+#define SERVER_MUTEX_WAIT_TIME ( ((NUM_CLI_AUTH_CONNECT_RETRIES) * ((CLI_AUTH_TIMEOUT)/1000)) + 5)
+/* Number in seconds for winbindd to wait for the mutex. Make this 2 * smbd wait time. */
+#define WINBIND_SERVER_MUTEX_WAIT_TIME (( ((NUM_CLI_AUTH_CONNECT_RETRIES) * ((CLI_AUTH_TIMEOUT)/1000)) + 5)*2)
+
+/* Max number of simultaneous winbindd socket connections. */
+#define WINBINDD_MAX_SIMULTANEOUS_CLIENTS 200
+#endif