summaryrefslogtreecommitdiff
path: root/source4/lib/zlib/examples/fitblk.c
diff options
context:
space:
mode:
Diffstat (limited to 'source4/lib/zlib/examples/fitblk.c')
-rw-r--r--source4/lib/zlib/examples/fitblk.c233
1 files changed, 0 insertions, 233 deletions
diff --git a/source4/lib/zlib/examples/fitblk.c b/source4/lib/zlib/examples/fitblk.c
deleted file mode 100644
index c61de5c996..0000000000
--- a/source4/lib/zlib/examples/fitblk.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/* fitblk.c: example of fitting compressed output to a specified size
- Not copyrighted -- provided to the public domain
- Version 1.1 25 November 2004 Mark Adler */
-
-/* Version history:
- 1.0 24 Nov 2004 First version
- 1.1 25 Nov 2004 Change deflateInit2() to deflateInit()
- Use fixed-size, stack-allocated raw buffers
- Simplify code moving compression to subroutines
- Use assert() for internal errors
- Add detailed description of approach
- */
-
-/* Approach to just fitting a requested compressed size:
-
- fitblk performs three compression passes on a portion of the input
- data in order to determine how much of that input will compress to
- nearly the requested output block size. The first pass generates
- enough deflate blocks to produce output to fill the requested
- output size plus a specfied excess amount (see the EXCESS define
- below). The last deflate block may go quite a bit past that, but
- is discarded. The second pass decompresses and recompresses just
- the compressed data that fit in the requested plus excess sized
- buffer. The deflate process is terminated after that amount of
- input, which is less than the amount consumed on the first pass.
- The last deflate block of the result will be of a comparable size
- to the final product, so that the header for that deflate block and
- the compression ratio for that block will be about the same as in
- the final product. The third compression pass decompresses the
- result of the second step, but only the compressed data up to the
- requested size minus an amount to allow the compressed stream to
- complete (see the MARGIN define below). That will result in a
- final compressed stream whose length is less than or equal to the
- requested size. Assuming sufficient input and a requested size
- greater than a few hundred bytes, the shortfall will typically be
- less than ten bytes.
-
- If the input is short enough that the first compression completes
- before filling the requested output size, then that compressed
- stream is return with no recompression.
-
- EXCESS is chosen to be just greater than the shortfall seen in a
- two pass approach similar to the above. That shortfall is due to
- the last deflate block compressing more efficiently with a smaller
- header on the second pass. EXCESS is set to be large enough so
- that there is enough uncompressed data for the second pass to fill
- out the requested size, and small enough so that the final deflate
- block of the second pass will be close in size to the final deflate
- block of the third and final pass. MARGIN is chosen to be just
- large enough to assure that the final compression has enough room
- to complete in all cases.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <assert.h>
-#include "zlib.h"
-
-#define local static
-
-/* print nastygram and leave */
-local void quit(char *why)
-{
- fprintf(stderr, "fitblk abort: %s\n", why);
- exit(1);
-}
-
-#define RAWLEN 4096 /* intermediate uncompressed buffer size */
-
-/* compress from file to def until provided buffer is full or end of
- input reached; return last deflate() return value, or Z_ERRNO if
- there was read error on the file */
-local int partcompress(FILE *in, z_streamp def)
-{
- int ret, flush;
- unsigned char raw[RAWLEN];
-
- flush = Z_NO_FLUSH;
- do {
- def->avail_in = fread(raw, 1, RAWLEN, in);
- if (ferror(in))
- return Z_ERRNO;
- def->next_in = raw;
- if (feof(in))
- flush = Z_FINISH;
- ret = deflate(def, flush);
- assert(ret != Z_STREAM_ERROR);
- } while (def->avail_out != 0 && flush == Z_NO_FLUSH);
- return ret;
-}
-
-/* recompress from inf's input to def's output; the input for inf and
- the output for def are set in those structures before calling;
- return last deflate() return value, or Z_MEM_ERROR if inflate()
- was not able to allocate enough memory when it needed to */
-local int recompress(z_streamp inf, z_streamp def)
-{
- int ret, flush;
- unsigned char raw[RAWLEN];
-
- flush = Z_NO_FLUSH;
- do {
- /* decompress */
- inf->avail_out = RAWLEN;
- inf->next_out = raw;
- ret = inflate(inf, Z_NO_FLUSH);
- assert(ret != Z_STREAM_ERROR && ret != Z_DATA_ERROR &&
- ret != Z_NEED_DICT);
- if (ret == Z_MEM_ERROR)
- return ret;
-
- /* compress what was decompresed until done or no room */
- def->avail_in = RAWLEN - inf->avail_out;
- def->next_in = raw;
- if (inf->avail_out != 0)
- flush = Z_FINISH;
- ret = deflate(def, flush);
- assert(ret != Z_STREAM_ERROR);
- } while (ret != Z_STREAM_END && def->avail_out != 0);
- return ret;
-}
-
-#define EXCESS 256 /* empirically determined stream overage */
-#define MARGIN 8 /* amount to back off for completion */
-
-/* compress from stdin to fixed-size block on stdout */
-int main(int argc, char **argv)
-{
- int ret; /* return code */
- unsigned size; /* requested fixed output block size */
- unsigned have; /* bytes written by deflate() call */
- unsigned char *blk; /* intermediate and final stream */
- unsigned char *tmp; /* close to desired size stream */
- z_stream def, inf; /* zlib deflate and inflate states */
-
- /* get requested output size */
- if (argc != 2)
- quit("need one argument: size of output block");
- ret = strtol(argv[1], argv + 1, 10);
- if (argv[1][0] != 0)
- quit("argument must be a number");
- if (ret < 8) /* 8 is minimum zlib stream size */
- quit("need positive size of 8 or greater");
- size = (unsigned)ret;
-
- /* allocate memory for buffers and compression engine */
- blk = malloc(size + EXCESS);
- def.zalloc = Z_NULL;
- def.zfree = Z_NULL;
- def.opaque = Z_NULL;
- ret = deflateInit(&def, Z_DEFAULT_COMPRESSION);
- if (ret != Z_OK || blk == NULL)
- quit("out of memory");
-
- /* compress from stdin until output full, or no more input */
- def.avail_out = size + EXCESS;
- def.next_out = blk;
- ret = partcompress(stdin, &def);
- if (ret == Z_ERRNO)
- quit("error reading input");
-
- /* if it all fit, then size was undersubscribed -- done! */
- if (ret == Z_STREAM_END && def.avail_out >= EXCESS) {
- /* write block to stdout */
- have = size + EXCESS - def.avail_out;
- if (fwrite(blk, 1, have, stdout) != have || ferror(stdout))
- quit("error writing output");
-
- /* clean up and print results to stderr */
- ret = deflateEnd(&def);
- assert(ret != Z_STREAM_ERROR);
- free(blk);
- fprintf(stderr,
- "%u bytes unused out of %u requested (all input)\n",
- size - have, size);
- return 0;
- }
-
- /* it didn't all fit -- set up for recompression */
- inf.zalloc = Z_NULL;
- inf.zfree = Z_NULL;
- inf.opaque = Z_NULL;
- inf.avail_in = 0;
- inf.next_in = Z_NULL;
- ret = inflateInit(&inf);
- tmp = malloc(size + EXCESS);
- if (ret != Z_OK || tmp == NULL)
- quit("out of memory");
- ret = deflateReset(&def);
- assert(ret != Z_STREAM_ERROR);
-
- /* do first recompression close to the right amount */
- inf.avail_in = size + EXCESS;
- inf.next_in = blk;
- def.avail_out = size + EXCESS;
- def.next_out = tmp;
- ret = recompress(&inf, &def);
- if (ret == Z_MEM_ERROR)
- quit("out of memory");
-
- /* set up for next reocmpression */
- ret = inflateReset(&inf);
- assert(ret != Z_STREAM_ERROR);
- ret = deflateReset(&def);
- assert(ret != Z_STREAM_ERROR);
-
- /* do second and final recompression (third compression) */
- inf.avail_in = size - MARGIN; /* assure stream will complete */
- inf.next_in = tmp;
- def.avail_out = size;
- def.next_out = blk;
- ret = recompress(&inf, &def);
- if (ret == Z_MEM_ERROR)
- quit("out of memory");
- assert(ret == Z_STREAM_END); /* otherwise MARGIN too small */
-
- /* done -- write block to stdout */
- have = size - def.avail_out;
- if (fwrite(blk, 1, have, stdout) != have || ferror(stdout))
- quit("error writing output");
-
- /* clean up and print results to stderr */
- free(tmp);
- ret = inflateEnd(&inf);
- assert(ret != Z_STREAM_ERROR);
- ret = deflateEnd(&def);
- assert(ret != Z_STREAM_ERROR);
- free(blk);
- fprintf(stderr,
- "%u bytes unused out of %u requested (%lu input)\n",
- size - have, size, def.total_in);
- return 0;
-}