diff options
Diffstat (limited to 'source4/script')
| -rwxr-xr-x | source4/script/tests/selftest.pl | 253 |
1 files changed, 253 insertions, 0 deletions
diff --git a/source4/script/tests/selftest.pl b/source4/script/tests/selftest.pl new file mode 100755 index 0000000000..169dc9edd8 --- /dev/null +++ b/source4/script/tests/selftest.pl @@ -0,0 +1,253 @@ +#!/usr/bin/perl +# Bootstrap Samba and run a number of tests against it. +# Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org> +# Published under the GNU GPL, v3 or later. +use strict; +use warnings; + +use FindBin qw($RealBin $Script); +use File::Spec; +use POSIX; +use Cwd; + +sub slapd_start($$) { + my ($conf, $uri) = @_; + my $oldpath = $ENV{PATH}; + $ENV{PATH} = "/usr/local/sbin:/usr/sbin:/sbin:$ENV{PATH}"; + # running slapd in the background means it stays in the same process group, so it can be + # killed by timelimit + system("slapd -d0 -f $conf -h $uri &"); + $ENV{PATH} = $oldpath; + return $? >> 8; +} + +sub smbd_check_or_start($$$$$$) +{ + my ($bindir, $test_fifo, $test_log, $socket_wrapper_dir, $max_time, $conffile) = @_; + return 0 if ( -p $test_fifo ); + + if (defined($socket_wrapper_dir)) { + if ( -d $socket_wrapper_dir ) { + unlink <$socket_wrapper_dir/*>; + } else { + mkdir($socket_wrapper_dir); + } + } + + unlink($test_fifo); + system("mkfifo $test_fifo"); + + unlink($test_log); + + my $valgrind = ""; + if (defined($ENV{SMBD_VALGRIND})) { + $valgrind = $ENV{SMBD_VALGRIND}; + } + + print "STARTING SMBD..."; + my $pid = fork(); + if ($pid == 0) { + my $ret = system("$valgrind $bindir/smbd --maximum-runtime=$max_time -s $conffile -M single -i --leak-report-full < $test_fifo > $test_log"); + open LOG, ">>$test_log"; + if ($? == -1) { + print LOG "Unable to start smbd: $ret: $!\n"; + print "Unable to start smbd: $ret: $!\n"; + exit 1; + } + unlink($test_fifo); + unlink(<$socket_wrapper_dir/*>) if (defined($socket_wrapper_dir) and -d $socket_wrapper_dir); + my $exit = $? >> 8; + if ( $ret == 0 ) { + print "smbd exits with status $exit\n"; + print LOG "smbd exits with status $exit\n"; + } elsif ( $ret & 127 ) { + print "smbd got signal ".($ret & 127)." and exits with $exit!\n"; + print LOG "smbd got signal".($ret & 127). " and exits with $exit!\n"; + } else { + $ret = $? >> 8; + print "smbd failed with status $exit!\n"; + print LOG "smbd failed with status $exit!\n"; + } + close(LOG); + exit $exit; + } + print "DONE\n"; + + return $pid; +} + +sub teststatus($$) { + my ($name, $failed) = @_; + + print "TEST STATUS: $failed failures\n"; + if ($failed > 0) { +print <<EOF +************************ +*** TESTSUITE FAILED *** +************************ +EOF +; + } + exit $failed; +} + +die("Usage: $Script PREFIX TESTS [SOCKET_WRAPPER]") if ( $#ARGV == -1); + +my $prefix = shift; +my $tests = shift; +my $socket_wrapper = shift; + +my $torture_maxtime = $ENV{TORTURE_MAXTIME}; +unless (defined($torture_maxtime)) { + $torture_maxtime = 1200; +} + +# disable rpc validation when using valgrind - its way too slow +my $valgrind = $ENV{VALGRIND}; +my $validate = undef; +unless (defined($valgrind)) { + $validate = "validate"; +} + +my $old_pwd = "$RealBin/../.."; +my $ldap = (defined($ENV{TEST_LDAP}) and ($ENV{TEST_LDAP} eq "yes"))?1:0; + +$prefix =~ s+//+/+; +$ENV{PREFIX} = $prefix; + +my $srcdir = "$RealBin/../.."; +if (defined($ENV{srcdir})) { + $srcdir = $ENV{srcdir}; +} +$ENV{SRCDIR} = $srcdir; + +my $bindir = "$srcdir/bin"; +my $setupdir = "$srcdir/setup"; +my $testsdir = "$srcdir/script/tests"; + +my $tls_enabled = 0; +if ($tests eq "all") { + $tls_enabled = 1; +} + +$ENV{TLS_ENABLED} = ($tls_enabled?"yes":"no"); +$ENV{LD_LDB_MODULE_PATH} = "$old_pwd/bin/modules/ldb"; +$ENV{LD_SAMBA_MODULE_PATH} = "$old_pwd/bin/modules"; +if (defined($ENV{LD_LIBRARY_PATH})) { + $ENV{LD_LIBRARY_PATH} = "$old_pwd/bin/shared:$ENV{LD_LIBRARY_PATH}"; +} else { + $ENV{LD_LIBRARY_PATH} = "$old_pwd/bin/shared"; +} +$ENV{PKG_CONFIG_PATH} = "$old_pwd/bin/pkgconfig:$ENV{PKG_CONFIG_PATH}"; +$ENV{PATH} = "$old_pwd/bin:$ENV{PATH}"; + +print "PROVISIONING..."; +open(IN, "$RealBin/mktestsetup.sh $prefix|") or die("Unable to setup"); +while (<IN>) { + next unless (/^([A-Z_]+)=(.*)$/); + $ENV{$1} = $2; +} +close(IN); + +my $socket_wrapper_dir = undef; + +if ( defined($socket_wrapper) and $socket_wrapper eq "SOCKET_WRAPPER") +{ + $socket_wrapper_dir = "$prefix/w"; + $ENV{SOCKET_WRAPPER_DIR} = $socket_wrapper_dir; + print "SOCKET_WRAPPER_DIR=$ENV{SOCKET_WRAPPER_DIR}\n"; +} else { + print "NOT USING SOCKET_WRAPPER\n"; +} + +#Start slapd before smbd +if ($ldap) { + slapd_start($ENV{SLAPD_CONF}, $ENV{LDAPI_ESCAPE}) or die("couldn't start slapd"); + print "LDAP PROVISIONING..."; + system("$bindir/smbscript $setupdir/provision $ENV{PROVISION_OPTIONS} --ldap-backend=$ENV{LDAPI}") or + die("LDAP PROVISIONING failed: $bindir/smbscript $setupdir/provision $ENV{PROVISION_OPTIONS} --ldap-backend=$ENV{LDAPI}"); + + #LDAP is slow + $torture_maxtime *= 2; +} + +my $test_fifo = "$prefix/smbd_test.fifo"; + +$ENV{SMBD_TEST_FIFO} = $test_fifo; +$ENV{SMBD_TEST_LOG} = "$prefix/smbd_test.log"; + +$ENV{SOCKET_WRAPPER_DEFAULT_IFACE} = 1; +my $max_time = 5400; +if (defined($ENV{SMBD_MAX_TIME})) { + $max_time = $ENV{SMBD_MAX_TIME}; +} +smbd_check_or_start($bindir, $test_fifo, $ENV{SMBD_TEST_LOG}, $socket_wrapper_dir, $max_time, $ENV{CONFFILE}); + +$ENV{SOCKET_WRAPPER_DEFAULT_IFACE} = 6; +$ENV{TORTURE_INTERFACES} = '127.0.0.6/8,127.0.0.7/8,127.0.0.8/8,127.0.0.9/8,127.0.0.10/8,127.0.0.11/8'; + +my @torture_options = ("--option=interfaces=$ENV{TORTURE_INTERFACES} $ENV{CONFIGURATION}"); +# ensure any one smbtorture call doesn't run too long +push (@torture_options, "--maximum-runtime=$torture_maxtime"); +push (@torture_options, "--target=samba4"); +push (@torture_options, "--option=torture:progress=no") + if (defined($ENV{RUN_FROM_BUILD_FARM}) and $ENV{RUN_FROM_BUILD_FARM} eq "yes"); + +$ENV{TORTURE_OPTIONS} = join(' ', @torture_options); +print "OPTIONS $ENV{TORTURE_OPTIONS}\n"; + +my $start = time(); + +open(DATA, ">$test_fifo"); + +# give time for nbt server to register its names +print "delaying for nbt name registration\n"; +sleep(4); + +# This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init +system("bin/nmblookup $ENV{CONFIGURATION} $ENV{SERVER}"); +system("bin/nmblookup $ENV{CONFIGURATION} -U $ENV{SERVER} $ENV{SERVER}"); +system("bin/nmblookup $ENV{CONFIGURATION} $ENV{SERVER}"); +system("bin/nmblookup $ENV{CONFIGURATION} -U $ENV{SERVER} $ENV{NETBIOSNAME}"); +system("bin/nmblookup $ENV{CONFIGURATION} $ENV{NETBIOSNAME}"); +system("bin/nmblookup $ENV{CONFIGURATION} -U $ENV{SERVER} $ENV{NETBIOSNAME}"); + +# start off with 0 failures +$ENV{failed} = 0; +$ENV{totalfailed} = 0; + +system("$testsdir/tests_$tests.sh"); + +close(DATA); + +my $failed = $? >> 8; + +if (-f "$ENV{PIDDIR}/smbd.pid" ) { + open(IN, "<$ENV{PIDDIR}/smbd.pid") or die("unable to open smbd pid file"); + kill 9, <IN>; + close(IN); +} + +if ($ldap) { + open(IN, "<$ENV{PIDDIR}/slapd.pid") or die("unable to open slapd pid file"); + kill 9, <IN>; + close(IN); +} + +my $end=time(); +print "DURATION: " . ($end-$start). " seconds\n"; + +# if there were any valgrind failures, show them +foreach (<$prefix/valgrind.log*>) { + next unless (-s $_); + system("grep DWARF2.CFI.reader $_ > /dev/null"); + if ($? >> 8 == 0) { + print "VALGRIND FAILURE\n"; + $failed++; + system("cat $_"); + } +} + +teststatus($Script, $failed); + +exit $failed; |