diff options
Diffstat (limited to 'source4')
| -rw-r--r-- | source4/configure.in | 575 | ||||
| -rw-r--r-- | source4/lib/popt/config.m4 | 31 | ||||
| -rw-r--r-- | source4/libads/config.m4 | 247 | ||||
| -rw-r--r-- | source4/nsswitch/config.m4 | 105 | ||||
| -rw-r--r-- | source4/ntvfs/config.m4 | 18 | ||||
| -rw-r--r-- | source4/passdb/config.m4 | 11 | ||||
| -rw-r--r-- | source4/popt/config.m4 | 31 | ||||
| -rw-r--r-- | source4/printing/config.m4 | 16 | ||||
| -rw-r--r-- | source4/python/config.m4 | 27 | ||||
| -rw-r--r-- | source4/web/config.m4 | 17 |
10 files changed, 515 insertions, 563 deletions
diff --git a/source4/configure.in b/source4/configure.in index f2d91b78b1..3f7bfca868 100644 --- a/source4/configure.in +++ b/source4/configure.in @@ -81,21 +81,7 @@ AC_ARG_WITH(piddir, ;; esac]) -################################################# -# set SWAT directory location -AC_ARG_WITH(swatdir, -[ --with-swatdir=DIR Where to put SWAT files ($ac_default_prefix/swat)], -[ case "$withval" in - yes|no) - # - # Just in case anybody does it - # - AC_MSG_WARN([--with-swatdir called without argument - will use default]) - ;; - * ) - swatdir="$withval" - ;; - esac]) +sinclude(web/config.m4) ################################################# # set configuration directory location @@ -134,7 +120,6 @@ AC_SUBST(lockdir) AC_SUBST(piddir) AC_SUBST(logfilebase) AC_SUBST(privatedir) -AC_SUBST(swatdir) AC_SUBST(bindir) AC_SUBST(sbindir) @@ -179,16 +164,6 @@ AC_ARG_ENABLE(krb5developer, [ --enable-krb5developer Turn on developer warnin CFLAGS="${CFLAGS} -gstabs -Wall -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -DDEBUG_PASSWORD -DDEVELOPER" fi]) -AC_ARG_ENABLE(dmalloc, [ --enable-dmalloc Enable heap debugging [default=no]]) - -if test "x$enable_dmalloc" = xyes -then - AC_DEFINE(ENABLE_DMALLOC, 1, [Define to turn on dmalloc debugging]) - AC_DEFINE(DMALLOC_FUNC_CHECK, 1, - [Define to check invariants around some common functions]) - LIBS="$LIBS -ldmalloc" -fi - dnl Checks for programs. AC_PROG_CC AC_PROG_INSTALL @@ -258,10 +233,10 @@ DYNEXP= dnl Add modules that have to be built by default here dnl These have to be built static: -default_static_modules="pdb_smbpasswd auth_sam auth_unix auth_builtin ntvfs_ipc ntvfs_simple ntvfs_print ntvfs_cifs" +default_static_modules="ntvfs_ipc ntvfs_simple ntvfs_print ntvfs_cifs" dnl These are preferably build shared, and static if dlopen() is not available -default_shared_modules="vfs_recycle vfs_audit vfs_extd_audit vfs_netatalk vfs_fake_perms" +default_shared_modules="" if test "x$developer" = xyes; then default_static_modules="$default_static_modules" @@ -492,7 +467,7 @@ AC_HEADER_STDC AC_HEADER_DIRENT AC_HEADER_TIME AC_HEADER_SYS_WAIT -AC_CHECK_HEADERS(arpa/inet.h sys/fcntl.h sys/select.h fcntl.h sys/time.h sys/unistd.h) +AC_CHECK_HEADERS(arpa/inet.h sys/select.h fcntl.h sys/time.h) AC_CHECK_HEADERS(unistd.h utime.h grp.h sys/id.h limits.h memory.h net/if.h) AC_CHECK_HEADERS(compat.h rpc/rpc.h rpcsvc/nis.h rpcsvc/yp_prot.h rpcsvc/ypclnt.h) AC_CHECK_HEADERS(sys/param.h ctype.h sys/wait.h sys/resource.h sys/ioctl.h sys/ipc.h sys/mode.h) @@ -519,17 +494,7 @@ AC_CHECK_HEADERS(shadow.h netinet/ip.h netinet/tcp.h netinet/in_systm.h netinet/ AC_CHECK_HEADERS(nss.h nss_common.h ns_api.h sys/security.h security/pam_appl.h security/pam_modules.h) AC_CHECK_HEADERS(stropts.h poll.h) AC_CHECK_HEADERS(sys/capability.h syscall.h sys/syscall.h) -AC_CHECK_HEADERS(sys/acl.h sys/cdefs.h glob.h) - -# For experimental utmp support (lastlog on some BSD-like systems) -AC_CHECK_HEADERS(utmp.h utmpx.h lastlog.h) - -# For quotas on Veritas VxFS filesystems -AC_CHECK_HEADERS(sys/fs/vx_quota.h) - -# For quotas on Linux XFS filesystems -AC_CHECK_HEADERS(linux/xqm.h) -AC_CHECK_HEADERS(xfs/xqm.h) +AC_CHECK_HEADERS(sys/acl.h) AC_CHECK_SIZEOF(int,cross) AC_CHECK_SIZEOF(long,cross) @@ -555,23 +520,6 @@ AC_CHECK_TYPE(ssize_t, int) AC_CHECK_TYPE(wchar_t, unsigned short) ############################################ -# for cups support we need libcups, and a handful of header files - -AC_ARG_ENABLE(cups, -[ --enable-cups Turn on CUPS support (default=auto)]) - -if test x$enable_cups != xno; then - AC_PATH_PROG(CUPS_CONFIG, cups-config) - - if test "x$CUPS_CONFIG" != x; then - AC_DEFINE(HAVE_CUPS,1,[Whether we have CUPS]) - CFLAGS="$CFLAGS `$CUPS_CONFIG --cflags`" - LDFLAGS="$LDFLAGS `$CUPS_CONFIG --ldflags`" - PRINTLIBS="$PRINTLIBS `$CUPS_CONFIG --libs`" - fi -fi - -############################################ # we need dlopen/dlclose/dlsym/dlerror for PAM, the password database plugins and the plugin loading code AC_SEARCH_LIBS(dlopen, [dl]) # dlopen/dlclose/dlsym/dlerror will be checked again later and defines will be set then @@ -1882,6 +1830,7 @@ dnl glibc2.1 broken check has succeeded. dnl AC_CACHE_CHECK([for 64 bit fcntl locking],samba_cv_HAVE_STRUCT_FLOCK64,[ + AC_CHECK_HEADERS(sys/fcntl.h) AC_TRY_RUN([ #if defined(HAVE_UNISTD_H) #include <unistd.h> @@ -2058,246 +2007,8 @@ AC_ARG_WITH(dfs, AC_MSG_RESULT(no) ) -################################################# -# active directory support - -with_ads_support=yes -AC_MSG_CHECKING([whether to use Active Directory]) - -AC_ARG_WITH(ads, -[ --with-ads Active Directory support (default yes)], -[ case "$withval" in - no) - with_ads_support=no - ;; - esac ]) - -if test x"$with_ads_support" = x"yes"; then - AC_DEFINE(WITH_ADS,1,[Whether to include Active Directory support]) -fi - -AC_MSG_RESULT($with_ads_support) - -FOUND_KRB5=no -if test x"$with_ads_support" = x"yes"; then - - ################################################# - # check for krb5-config from recent MIT and Heimdal kerberos 5 - AC_PATH_PROG(KRB5_CONFIG, krb5-config) - AC_MSG_CHECKING(for working krb5-config) - if test -x "$KRB5_CONFIG"; then - LIBS="$LIBS `$KRB5_CONFIG --libs`" - CFLAGS="$CFLAGS `$KRB5_CONFIG --cflags`" - CPPFLAGS="$CPPFLAGS `$KRB5_CONFIG --cflags`" - FOUND_KRB5=yes - AC_MSG_RESULT(yes) - else - AC_MSG_RESULT(no. Fallback to previous krb5 detection strategy) - fi - - if test x$FOUND_KRB5 = x"no"; then - ################################################# - # check for location of Kerberos 5 install - AC_MSG_CHECKING(for kerberos 5 install path) - AC_ARG_WITH(krb5, - [ --with-krb5=base-dir Locate Kerberos 5 support (default=/usr)], - [ case "$withval" in - no) - AC_MSG_RESULT(no) - ;; - *) - AC_MSG_RESULT(yes) - LIBS="$LIBS -lkrb5" - CFLAGS="$CFLAGS -I$withval/include" - CPPFLAGS="$CPPFLAGS -I$withval/include" - LDFLAGS="$LDFLAGS -L$withval/lib" - FOUND_KRB5=yes - ;; - esac ], - AC_MSG_RESULT(no) - ) - fi - -if test x$FOUND_KRB5 = x"no"; then -################################################# -# see if this box has the SuSE location for the heimdal kerberos implementation -AC_MSG_CHECKING(for /usr/include/heimdal) -if test -d /usr/include/heimdal; then - if test -f /usr/lib/heimdal/lib/libkrb5.a; then - LIBS="$LIBS -lkrb5" - CFLAGS="$CFLAGS -I/usr/include/heimdal" - CPPFLAGS="$CPPFLAGS -I/usr/include/heimdal" - LDFLAGS="$LDFLAGS -L/usr/lib/heimdal/lib" - AC_MSG_RESULT(yes) - else - LIBS="$LIBS -lkrb5" - CFLAGS="$CFLAGS -I/usr/include/heimdal" - CPPFLAGS="$CPPFLAGS -I/usr/include/heimdal" - AC_MSG_RESULT(yes) - - fi -else - AC_MSG_RESULT(no) -fi -fi - - -if test x$FOUND_KRB5 = x"no"; then -################################################# -# see if this box has the RedHat location for kerberos -AC_MSG_CHECKING(for /usr/kerberos) -if test -d /usr/kerberos -a -f /usr/kerberos/lib/libkrb5.a; then - LIBS="$LIBS -lkrb5" - LDFLAGS="$LDFLAGS -L/usr/kerberos/lib" - CFLAGS="$CFLAGS -I/usr/kerberos/include" - CPPFLAGS="$CPPFLAGS -I/usr/kerberos/include" - AC_MSG_RESULT(yes) -else - AC_MSG_RESULT(no) -fi -fi - - # now check for krb5.h. Some systems have the libraries without the headers! - # note that this check is done here to allow for different kerberos - # include paths - AC_CHECK_HEADERS(krb5.h) - - # now check for gssapi headers. This is also done here to allow for - # different kerberos include paths - AC_CHECK_HEADERS(gssapi.h gssapi/gssapi_generic.h gssapi/gssapi.h com_err.h) - - ################################################################## - # we might need the k5crypto and com_err libraries on some systems - AC_CHECK_LIB(com_err, _et_list, [LIBS="$LIBS -lcom_err"]) - AC_CHECK_LIB(k5crypto, krb5_encrypt_data, [LIBS="$LIBS -lk5crypto"]) - # Heimdal checks. - AC_CHECK_LIB(crypto, des_set_key, [LIBS="$LIBS -lcrypto"]) - AC_CHECK_LIB(asn1, copy_Authenticator, [LIBS="$LIBS -lasn1 -lroken"]) - # Heimdal checks. On static Heimdal gssapi must be linked before krb5. - AC_CHECK_LIB(gssapi, gss_display_status, [LIBS="$LIBS -lgssapi -lkrb5 -lasn1"; - AC_DEFINE(HAVE_GSSAPI,1,[Whether GSSAPI is available])]) - - AC_CHECK_LIB(krb5, krb5_set_real_time, [AC_DEFINE(HAVE_KRB5_SET_REAL_TIME,1,[Whether krb5_set_real_time is available])]) - AC_CHECK_LIB(krb5, krb5_set_default_in_tkt_etypes, [AC_DEFINE(HAVE_KRB5_SET_DEFAULT_IN_TKT_ETYPES,1,[Whether krb5_set_default_in_tkt_etypes, is available])]) - AC_CHECK_LIB(krb5, krb5_set_default_tgs_ktypes, [AC_DEFINE(HAVE_KRB5_SET_DEFAULT_TGS_KTYPES,1,[Whether krb5_set_default_tgs_ktypes is available])]) - - AC_CHECK_LIB(krb5, krb5_principal2salt, [AC_DEFINE(HAVE_KRB5_PRINCIPAL2SALT,1,[Whether krb5_principal2salt is available])]) - AC_CHECK_LIB(krb5, krb5_use_enctype, [AC_DEFINE(HAVE_KRB5_USE_ENCTYPE,1,[Whether krb5_use_enctype is available])]) - AC_CHECK_LIB(krb5, krb5_string_to_key, [AC_DEFINE(HAVE_KRB5_STRING_TO_KEY,1,[Whether krb5_string_to_key is available])]) - AC_CHECK_LIB(krb5, krb5_get_pw_salt, [AC_DEFINE(HAVE_KRB5_GET_PW_SALT,1,[Whether krb5_get_pw_salt is available])]) - AC_CHECK_LIB(krb5, krb5_string_to_key_salt, [AC_DEFINE(HAVE_KRB5_STRING_TO_KEY_SALT,1,[Whether krb5_string_to_key_salt is available])]) - AC_CHECK_LIB(krb5, krb5_auth_con_setkey, [AC_DEFINE(HAVE_KRB5_AUTH_CON_SETKEY,1,[Whether krb5_auth_con_setkey is available])]) - AC_CHECK_LIB(krb5, krb5_auth_con_setuseruserkey, [AC_DEFINE(HAVE_KRB5_AUTH_CON_SETUSERUSERKEY,1,[Whether krb5_auth_con_setuseruserkey is available])]) - AC_CHECK_LIB(krb5, krb5_locate_kdc, [AC_DEFINE(HAVE_KRB5_LOCATE_KDC,1,[Whether krb5_locate_kdc is available])]) - AC_CHECK_LIB(krb5, krb5_get_permitted_enctypes, [AC_DEFINE(HAVE_KRB5_GET_PERMITTED_ENCTYPES,1,[Whether krb5_get_permitted_enctypes is available])]) - AC_CHECK_LIB(krb5, krb5_get_default_in_tkt_etypes, [AC_DEFINE(HAVE_KRB5_GET_DEFAULT_IN_TKT_ETYPES,1,[Whether krb5_get_default_in_tkt_etypes is available])]) - AC_CHECK_LIB(krb5, krb5_free_ktypes, [AC_DEFINE(HAVE_KRB5_FREE_KTYPES,1,[Whether krb5_free_ktypes is available])]) - -AC_CACHE_CHECK([for addrtype in krb5_address],samba_cv_HAVE_ADDRTYPE_IN_KRB5_ADDRESS,[ -AC_TRY_COMPILE([#include <krb5.h>], -[krb5_address kaddr; kaddr.addrtype = ADDRTYPE_INET;], -samba_cv_HAVE_ADDRTYPE_IN_KRB5_ADDRESS=yes,samba_cv_HAVE_ADDRTYPE_IN_KRB5_ADDRESS=no)]) -if test x"$samba_cv_HAVE_ADDRTYPE_IN_KRB5_ADDRESS" = x"yes"; then - AC_DEFINE(HAVE_ADDRTYPE_IN_KRB5_ADDRESS,1,[Whether the krb5_address struct has a addrtype property]) -fi - -AC_CACHE_CHECK([for addr_type in krb5_address],samba_cv_HAVE_ADDR_TYPE_IN_KRB5_ADDRESS,[ -AC_TRY_COMPILE([#include <krb5.h>], -[krb5_address kaddr; kaddr.addr_type = KRB5_ADDRESS_INET;], -samba_cv_HAVE_ADDR_TYPE_IN_KRB5_ADDRESS=yes,samba_cv_HAVE_ADDR_TYPE_IN_KRB5_ADDRESS=no)]) -if test x"$samba_cv_HAVE_ADDR_TYPE_IN_KRB5_ADDRESS" = x"yes"; then - AC_DEFINE(HAVE_ADDR_TYPE_IN_KRB5_ADDRESS,1,[Whether the krb5_address struct has a addr_type property]) -fi - -AC_CACHE_CHECK([for enc_part2 in krb5_ticket],samba_cv_HAVE_KRB5_TKT_ENC_PART2,[ -AC_TRY_COMPILE([#include <krb5.h>], -[krb5_ticket tkt; tkt.enc_part2->authorization_data[0]->contents = NULL;], -samba_cv_HAVE_KRB5_TKT_ENC_PART2=yes,samba_cv_HAVE_KRB5_TKT_ENC_PART2=no)]) -if test x"$samba_cv_HAVE_KRB5_TKT_ENC_PART2" = x"yes"; then - AC_DEFINE(HAVE_KRB5_TKT_ENC_PART2,1,[Whether the krb5_ticket struct has a enc_part2 property]) -fi - -AC_CACHE_CHECK([for keyvalue in krb5_keyblock],samba_cv_HAVE_KRB5_KEYBLOCK_KEYVALUE,[ -AC_TRY_COMPILE([#include <krb5.h>], -[krb5_keyblock key; key.keyvalue.data = NULL;], -samba_cv_HAVE_KRB5_KEYBLOCK_KEYVALUE=yes,samba_cv_HAVE_KRB5_KEYBLOCK_KEYVALUE=no)]) -if test x"$samba_cv_HAVE_KRB5_KEYBLOCK_KEYVALUE" = x"yes"; then - AC_DEFINE(HAVE_KRB5_KEYBLOCK_KEYVALUE,1,[Whether the krb5_keyblock struct has a keyvalue property]) -fi - -AC_CACHE_CHECK([for ENCTYPE_ARCFOUR_HMAC_MD5],samba_cv_HAVE_ENCTYPE_ARCFOUR_HMAC_MD5,[ -AC_TRY_COMPILE([#include <krb5.h>], -[krb5_enctype enctype; enctype = ENCTYPE_ARCFOUR_HMAC_MD5;], -samba_cv_HAVE_ENCTYPE_ARCFOUR_HMAC_MD5=yes,samba_cv_HAVE_ENCTYPE_ARCFOUR_HMAC_MD5=no)]) -if test x"$samba_cv_HAVE_ENCTYPE_ARCFOUR_HMAC_MD5" = x"yes"; then - AC_DEFINE(HAVE_ENCTYPE_ARCFOUR_HMAC_MD5,1,[Whether the ENCTYPE_ARCFOUR_HMAC_MD5 key type is available]) -fi - - ######################################################## - # now see if we can find the krb5 libs in standard paths - # or as specified above - AC_CHECK_LIB(krb5, krb5_mk_req_extended, [LIBS="$LIBS -lkrb5"; - AC_DEFINE(HAVE_KRB5,1,[Whether KRB5 is available])]) - - ######################################################## - # now see if we can find the gssapi libs in standard paths - AC_CHECK_LIB(gssapi_krb5, gss_display_status, [LIBS="$LIBS -lgssapi_krb5"; - AC_DEFINE(HAVE_GSSAPI,1,[Whether GSSAPI is available])]) - -fi - -######################################################## -# Compile with LDAP support? - -with_ldap_support=yes -AC_MSG_CHECKING([whether to use LDAP]) - -AC_ARG_WITH(ldap, -[ --with-ldap LDAP support (default yes)], -[ case "$withval" in - no) - with_ldap_support=no - ;; - esac ]) - -AC_MSG_RESULT($with_ldap_support) - -if test x"$with_ldap_support" = x"yes"; then - - ################################################################## - # we might need the lber lib on some systems. To avoid link errors - # this test must be before the libldap test - AC_CHECK_LIB(lber, ber_scanf, [LIBS="$LIBS -llber"]) - - ######################################################## - # now see if we can find the ldap libs in standard paths - if test x$have_ldap != xyes; then - AC_CHECK_LIB(ldap, ldap_domain2hostlist, [LIBS="$LIBS -lldap"; - AC_DEFINE(HAVE_LDAP,1,[Whether ldap is available])]) - - ######################################################## - # If we have LDAP, does it's rebind procedure take 2 or 3 arguments? - # Check found in pam_ldap 145. - AC_CHECK_FUNCS(ldap_set_rebind_proc) - AC_CACHE_CHECK(whether ldap_set_rebind_proc takes 3 arguments, pam_ldap_cv_ldap_set_rebind_proc, [ - AC_TRY_COMPILE([ - #include <lber.h> - #include <ldap.h>], [ldap_set_rebind_proc(0, 0, 0);], [pam_ldap_cv_ldap_set_rebind_proc=3], [pam_ldap_cv_ldap_set_rebind_proc=2]) ]) - AC_DEFINE_UNQUOTED(LDAP_SET_REBIND_PROC_ARGS, $pam_ldap_cv_ldap_set_rebind_proc, [Number of arguments to ldap_set_rebind_proc]) - fi -fi - -######################################################## -# Compile with MySQL support? -AM_PATH_MYSQL([0.11.0],[MODULE_MYSQL=bin/mysql.so],[MODULE_MYSQL=]) -CFLAGS="$CFLAGS $MYSQL_CFLAGS" -AC_SUBST(MODULE_MYSQL) - -######################################################## -# Compile with XML support? -AM_PATH_XML2([2.0.0],[MODULE_XML=bin/xml.so],[MODULE_XML=]) -CFLAGS="$CFLAGS $XML_CFLAGS" -AC_SUBST(MODULE_XML) +sinclude(libads/config.m4) +sinclude(passdb/config.m4) ################################################# # check for automount support @@ -2467,12 +2178,6 @@ AC_ARG_WITH(profiling-data, AC_MSG_RESULT(no) ) -######################################################################################## -## -## END OF TESTS FOR SAM BACKENDS. -## -######################################################################################## - ################################################# # check for a NISPLUS_HOME support AC_MSG_CHECKING(whether to use NISPLUS_HOME) @@ -2491,24 +2196,6 @@ AC_ARG_WITH(nisplus-home, ) ################################################# -# check for syslog logging -AC_MSG_CHECKING(whether to use syslog logging) -AC_ARG_WITH(syslog, -[ --with-syslog Include experimental SYSLOG support (default=no)], -[ case "$withval" in - yes) - AC_MSG_RESULT(yes) - AC_DEFINE(WITH_SYSLOG,1,[Whether to include experimental syslog support]) - ;; - *) - AC_MSG_RESULT(no) - ;; - esac ], - AC_MSG_RESULT(no) -) - - -################################################# # check for experimental disk-quotas support QUOTAOBJS=smbd/noquotas.o @@ -2592,54 +2279,6 @@ AC_ARG_WITH(manpages-langs, ) ################################################# -# should we build libsmbclient? - -INSTALLCLIENTCMD_SH=: -INSTALLCLIENTCMD_A=: -LIBSMBCLIENT_SHARED= -LIBSMBCLIENT= -AC_MSG_CHECKING(whether to build the libsmbclient shared library) -AC_ARG_WITH(libsmbclient, -[ --with-libsmbclient Build the libsmbclient shared library (default=yes if shared libs supported)], -[ case "$withval" in - no) - AC_MSG_RESULT(no) - ;; - *) - if test $BLDSHARED = true; then - INSTALLCLIENTCMD_SH="\$(INSTALLCMD)" - LIBSMBCLIENT_SHARED=bin/libsmbclient.$SHLIBEXT - LIBSMBCLIENT=libsmbclient - AC_MSG_RESULT(yes) - else - enable_static=yes - AC_MSG_RESULT(no shared library support -- will supply static library) - fi - if test $enable_static = yes; then - INSTALLCLIENTCMD_A="\$(INSTALLCMD)" - LIBSMBCLIENT=libsmbclient - fi - ;; - esac ], -[ -# if unspecified, default is to built it iff possible. - if test $BLDSHARED = true; then - INSTALLCLIENTCMD_SH="\$(INSTALLCMD)" - LIBSMBCLIENT_SHARED=bin/libsmbclient.$SHLIBEXT - LIBSMBCLIENT=libsmbclient - AC_MSG_RESULT(yes) - else - enable_static=yes - AC_MSG_RESULT(no shared library support -- will supply static library) - fi - if test $enable_static = yes; then - INSTALLCLIENTCMD_A="\$(INSTALLCMD)" - LIBSMBCLIENT=libsmbclient - fi] -) - - -################################################# # these tests are taken from the GNU fileutils package AC_CHECKING(how to get filesystem space usage) space=no @@ -3146,173 +2785,9 @@ samba_cv_HAVE_SENDFILEV=yes,samba_cv_HAVE_SENDFILEV=no)]) AC_MSG_RESULT(yes) ) - -################################################# -# Check whether winbind is supported on this platform. If so we need to -# build and install client programs, sbin programs and shared libraries - -AC_MSG_CHECKING(whether to build winbind) - -# Initially, the value of $host_os decides whether winbind is supported - -case "$host_os" in - *linux*|*irix*) - HAVE_WINBIND=yes - ;; - *solaris*) - HAVE_WINBIND=yes - WINBIND_NSS_EXTRA_OBJS="nsswitch/winbind_nss_solaris.o" - WINBIND_NSS_EXTRA_LIBS="-lsocket" - ;; - *hpux11*) - HAVE_WINBIND=yes - WINBIND_NSS_EXTRA_OBJS="nsswitch/winbind_nss_solaris.o" - ;; - *) - HAVE_WINBIND=no - winbind_no_reason=", unsupported on $host_os" - ;; -esac - -AC_SUBST(WINBIND_NSS_EXTRA_OBJS) -AC_SUBST(WINBIND_NSS_EXTRA_LIBS) - -# Check the setting of --with-winbindd - -AC_ARG_WITH(winbind, -[ --with-winbind Build winbind (default, if supported by OS)], -[ - case "$withval" in - yes) - HAVE_WINBIND=yes - ;; - no) - HAVE_WINBIND=no - winbind_reason="" - ;; - esac ], -) - -# We need unix domain sockets for winbind - -if test x"$HAVE_WINBIND" = x"yes"; then - if test x"$samba_cv_unixsocket" = x"no"; then - winbind_no_reason=", no unix domain socket support on $host_os" - HAVE_WINBIND=no - fi -fi - -# Display test results - -if test x"$HAVE_WINBIND" = x"yes"; then - AC_MSG_RESULT(yes) - AC_DEFINE(WITH_WINBIND,1,[Whether to build winbind]) - - EXTRA_BIN_PROGS="$EXTRA_BIN_PROGS bin/wbinfo\$(EXEEXT)" - EXTRA_SBIN_PROGS="$EXTRA_SBIN_PROGS bin/winbindd\$(EXEEXT)" - if test x"$BLDSHARED" = x"true"; then - case "$host_os" in - *irix*) - SHLIB_PROGS="$SHLIB_PROGS nsswitch/libns_winbind.so" - ;; - *) - SHLIB_PROGS="$SHLIB_PROGS nsswitch/libnss_winbind.so" - ;; - esac - if test x"$with_pam" = x"yes"; then - SHLIB_PROGS="$SHLIB_PROGS nsswitch/pam_winbind.so" - fi - fi -else - AC_MSG_RESULT(no$winbind_no_reason) -fi - -# Solaris has some extra fields in struct passwd that need to be -# initialised otherwise nscd crashes. Unfortunately autoconf < 2.50 -# doesn't have the AC_CHECK_MEMBER macro which would be handy for checking -# this. - -#AC_CHECK_MEMBER(struct passwd.pw_comment, -# AC_DEFINE(HAVE_PASSWD_PW_COMMENT, 1, [Defined if struct passwd has pw_comment field]), -# [#include <pwd.h>]) - -AC_CACHE_CHECK([whether struct passwd has pw_comment],samba_cv_passwd_pw_comment, [ - AC_TRY_COMPILE([#include <pwd.h>],[struct passwd p; p.pw_comment;], - samba_cv_passwd_pw_comment=yes,samba_cv_passwd_pw_comment=no)]) -if test x"$samba_cv_passwd_pw_comment" = x"yes"; then - AC_DEFINE(HAVE_PASSWD_PW_COMMENT,1,[Whether struct passwd has pw_comment]) -fi - -#AC_CHECK_MEMBER(struct passwd.pw_age, -# AC_DEFINE(HAVE_PASSWD_PW_AGE, 1, [Defined if struct passwd has pw_age field]), -# [#include <pwd.h>]) - -AC_CACHE_CHECK([whether struct passwd has pw_age],samba_cv_passwd_pw_age, [ - AC_TRY_COMPILE([#include <pwd.h>],[struct passwd p; p.pw_age;], - samba_cv_passwd_pw_age=yes,samba_cv_passwd_pw_age=no)]) -if test x"$samba_cv_passwd_pw_age" = x"yes"; then - AC_DEFINE(HAVE_PASSWD_PW_AGE,1,[Whether struct passwd has pw_age]) -fi - -################################################# -# Check to see if we should use the included popt - -AC_ARG_WITH(included-popt, -[ --with-included-popt use bundled popt library, not from system], -[ - case "$withval" in - yes) - INCLUDED_POPT=yes - ;; - no) - INCLUDED_POPT=no - ;; - esac ], -) -if test x"$INCLUDED_POPT" != x"yes"; then - AC_CHECK_LIB(popt, poptGetContext, - INCLUDED_POPT=no, INCLUDED_POPT=yes) -fi - -AC_MSG_CHECKING(whether to use included popt) -if test x"$INCLUDED_POPT" = x"yes"; then - AC_MSG_RESULT(yes) - BUILD_POPT='$(POPT_OBJS)' - FLAGS1="-I$srcdir/popt" -else - AC_MSG_RESULT(no) - LIBS="$LIBS -lpopt" -fi -AC_SUBST(BUILD_POPT) -AC_SUBST(FLAGS1) - -################################################# -# Check if the user wants Python - -# At the moment, you can use this to set which Python binary to link -# against. (Libraries built for Python2.2 can't be used by 2.1, -# though they can coexist in different directories.) In the future -# this might make the Python stuff be built by default. - -# Defaulting python breaks the clean target if python isn't installed - -PYTHON= - -AC_ARG_WITH(python, -[ --with-python=PYTHONNAME build Python libraries], -[ case "${withval-python}" in - yes) - PYTHON=python - EXTRA_ALL_TARGETS="$EXTRA_ALL_TARGETS python_ext" - ;; - no) - PYTHON= - ;; - *) - PYTHON=${withval-python} - ;; - esac ]) -AC_SUBST(PYTHON) +sinclude(nsswitch/config.m4) +sinclude(popt/config.m4) +sinclude(python/config.m4) for i in `echo $default_static_modules | sed -e's/,/ /g'` do @@ -3330,9 +2805,6 @@ do done dnl Always built these modules static -MODULE_pdb_guest=STATIC -MODULE_idmap_tdb=STATIC - AC_ARG_WITH(static-modules, [ --with-static-modules=MODULES Comma-seperated list of names of modules to statically link in], [ if test $withval; then @@ -3354,22 +2826,7 @@ fi ]) SMB_MODULE(charset_weird, modules/weird.o, "bin/weird.$SHLIBEXT", CHARSET) SMB_SUBSYSTEM(CHARSET,lib/iconv.o) -SMB_MODULE(ntvfs_cifs, \$(NTVFS_CIFS_OBJ), "bin/cifs.$SHLIBEXT$", NTVFS) -SMB_MODULE(ntvfs_simple, \$(NTVFS_SIMPLE_OBJ), "bin/ntvfs_simple.$SHLIBEXT$", NTVFS) -SMB_MODULE(ntvfs_print, \$(NTVFS_PRINT_OBJ), "bin/ntvfs_print.$SHLIBEXT$", NTVFS) -SMB_MODULE(ntvfs_ipc, \$(NTVFS_IPC_OBJ), "bin/ntvfs_ipc.$SHLIBEXT$", NTVFS) -SMB_MODULE(ntvfs_posix, \$(NTVFS_POSIX_OBJ), "bin/ntvfs_posix.$SHLIBEXT$", NTVFS) - -# Tank FS -SMB_MODULE(ntvfs_csm, \$(NTVFS_CSM_OBJ), "bin/ntvfs_csm.$SHLIBEXT$", NTVFS) -STFS_ENABLED="#" -if test "$MODULE_ntvfs_csm"; then - SMBD_EXTRA_LIBS="$SMBD_EXTRA_LIBS \$\(STFS_LIBS\)" - STFS_ENABLED= -fi -AC_SUBST(STFS_ENABLED) - -SMB_SUBSYSTEM(NTVFS,ntvfs/ntvfs_base.o) +sinclude(ntvfs/config.m4) AC_DEFINE_UNQUOTED(STRING_STATIC_MODULES, "$string_static_modules", [String list of builtin modules]) @@ -3401,11 +2858,3 @@ CFLAGS_REMOVE_USR_INCLUDE(CFLAGS) CFLAGS_REMOVE_USR_INCLUDE(CPPFLAGS) AC_OUTPUT(include/stamp-h Makefile script/findsmb) - -################################################# -# Print very concise instructions on building/use -if test "x$enable_dmalloc" = xyes -then - AC_MSG_RESULT([Note: The dmalloc debug library will be included. To turn it on use]) - AC_MSG_RESULT([ \$ eval \`dmalloc samba\`.]) -fi diff --git a/source4/lib/popt/config.m4 b/source4/lib/popt/config.m4 new file mode 100644 index 0000000000..7532c5826e --- /dev/null +++ b/source4/lib/popt/config.m4 @@ -0,0 +1,31 @@ +################################################# +# Check to see if we should use the included popt + +AC_ARG_WITH(included-popt, +[ --with-included-popt use bundled popt library, not from system], +[ + case "$withval" in + yes) + INCLUDED_POPT=yes + ;; + no) + INCLUDED_POPT=no + ;; + esac ], +) +if test x"$INCLUDED_POPT" != x"yes"; then + AC_CHECK_LIB(popt, poptGetContext, + INCLUDED_POPT=no, INCLUDED_POPT=yes) +fi + +AC_MSG_CHECKING(whether to use included popt) +if test x"$INCLUDED_POPT" = x"yes"; then + AC_MSG_RESULT(yes) + BUILD_POPT='$(POPT_OBJS)' + FLAGS1="-I$srcdir/popt" +else + AC_MSG_RESULT(no) + LIBS="$LIBS -lpopt" +fi +AC_SUBST(BUILD_POPT) +AC_SUBST(FLAGS1) diff --git a/source4/libads/config.m4 b/source4/libads/config.m4 new file mode 100644 index 0000000000..fc3108272e --- /dev/null +++ b/source4/libads/config.m4 @@ -0,0 +1,247 @@ +################################################# +# active directory support + +with_ads_support=yes +AC_MSG_CHECKING([whether to use Active Directory]) + +AC_ARG_WITH(ads, +[ --with-ads Active Directory support (default yes)], +[ case "$withval" in + no) + with_ads_support=no + ;; + esac ]) + +if test x"$with_ads_support" = x"yes"; then + AC_DEFINE(WITH_ADS,1,[Whether to include Active Directory support]) +fi + +AC_MSG_RESULT($with_ads_support) + +FOUND_KRB5=no +if test x"$with_ads_support" = x"yes"; then + + ################################################# + # check for krb5-config from recent MIT and Heimdal kerberos 5 + AC_PATH_PROG(KRB5_CONFIG, krb5-config) + AC_MSG_CHECKING(for working krb5-config) + if test -x "$KRB5_CONFIG"; then + LIBS="$LIBS `$KRB5_CONFIG --libs`" + CFLAGS="$CFLAGS `$KRB5_CONFIG --cflags`" + CPPFLAGS="$CPPFLAGS `$KRB5_CONFIG --cflags`" + FOUND_KRB5=yes + AC_MSG_RESULT(yes) + else + AC_MSG_RESULT(no. Fallback to previous krb5 detection strategy) + fi + + if test x$FOUND_KRB5 = x"no"; then + ################################################# + # check for location of Kerberos 5 install + AC_MSG_CHECKING(for kerberos 5 install path) + AC_ARG_WITH(krb5, + [ --with-krb5=base-dir Locate Kerberos 5 support (default=/usr)], + [ case "$withval" in + no) + AC_MSG_RESULT(no) + ;; + *) + AC_MSG_RESULT(yes) + LIBS="$LIBS -lkrb5" + CFLAGS="$CFLAGS -I$withval/include" + CPPFLAGS="$CPPFLAGS -I$withval/include" + LDFLAGS="$LDFLAGS -L$withval/lib" + FOUND_KRB5=yes + ;; + esac ], + AC_MSG_RESULT(no) + ) + fi + +if test x$FOUND_KRB5 = x"no"; then +################################################# +# see if this box has the SuSE location for the heimdal kerberos implementation +AC_MSG_CHECKING(for /usr/include/heimdal) +if test -d /usr/include/heimdal; then + if test -f /usr/lib/heimdal/lib/libkrb5.a; then + LIBS="$LIBS -lkrb5" + CFLAGS="$CFLAGS -I/usr/include/heimdal" + CPPFLAGS="$CPPFLAGS -I/usr/include/heimdal" + LDFLAGS="$LDFLAGS -L/usr/lib/heimdal/lib" + AC_MSG_RESULT(yes) + else + LIBS="$LIBS -lkrb5" + CFLAGS="$CFLAGS -I/usr/include/heimdal" + CPPFLAGS="$CPPFLAGS -I/usr/include/heimdal" + AC_MSG_RESULT(yes) + + fi +else + AC_MSG_RESULT(no) +fi +fi + + +if test x$FOUND_KRB5 = x"no"; then +################################################# +# see if this box has the RedHat location for kerberos +AC_MSG_CHECKING(for /usr/kerberos) +if test -d /usr/kerberos -a -f /usr/kerberos/lib/libkrb5.a; then + LIBS="$LIBS -lkrb5" + LDFLAGS="$LDFLAGS -L/usr/kerberos/lib" + CFLAGS="$CFLAGS -I/usr/kerberos/include" + CPPFLAGS="$CPPFLAGS -I/usr/kerberos/include" + AC_MSG_RESULT(yes) +else + AC_MSG_RESULT(no) +fi +fi + + # now check for krb5.h. Some systems have the libraries without the headers! + # note that this check is done here to allow for different kerberos + # include paths + AC_CHECK_HEADERS(krb5.h) + + # now check for gssapi headers. This is also done here to allow for + # different kerberos include paths + AC_CHECK_HEADERS(gssapi.h gssapi/gssapi_generic.h gssapi/gssapi.h com_err.h) + + ################################################################## + # we might need the k5crypto and com_err libraries on some systems + AC_CHECK_LIB(com_err, _et_list, [LIBS="$LIBS -lcom_err"]) + AC_CHECK_LIB(k5crypto, krb5_encrypt_data, [LIBS="$LIBS -lk5crypto"]) + # Heimdal checks. + AC_CHECK_LIB(crypto, des_set_key, [LIBS="$LIBS -lcrypto"]) + AC_CHECK_LIB(asn1, copy_Authenticator, [LIBS="$LIBS -lasn1 -lroken"]) + # Heimdal checks. On static Heimdal gssapi must be linked before krb5. + AC_CHECK_LIB(gssapi, gss_display_status, [LIBS="$LIBS -lgssapi -lkrb5 -lasn1"; + AC_DEFINE(HAVE_GSSAPI,1,[Whether GSSAPI is available])]) + + AC_CHECK_LIB(krb5, krb5_set_real_time, [AC_DEFINE(HAVE_KRB5_SET_REAL_TIME,1,[Whether krb5_set_real_time is available])]) + AC_CHECK_LIB(krb5, krb5_set_default_in_tkt_etypes, [AC_DEFINE(HAVE_KRB5_SET_DEFAULT_IN_TKT_ETYPES,1,[Whether krb5_set_default_in_tkt_etypes, is available])]) + AC_CHECK_LIB(krb5, krb5_set_default_tgs_ktypes, [AC_DEFINE(HAVE_KRB5_SET_DEFAULT_TGS_KTYPES,1,[Whether krb5_set_default_tgs_ktypes is available])]) + + AC_CHECK_LIB(krb5, krb5_principal2salt, [AC_DEFINE(HAVE_KRB5_PRINCIPAL2SALT,1,[Whether krb5_principal2salt is available])]) + AC_CHECK_LIB(krb5, krb5_use_enctype, [AC_DEFINE(HAVE_KRB5_USE_ENCTYPE,1,[Whether krb5_use_enctype is available])]) + AC_CHECK_LIB(krb5, krb5_string_to_key, [AC_DEFINE(HAVE_KRB5_STRING_TO_KEY,1,[Whether krb5_string_to_key is available])]) + AC_CHECK_LIB(krb5, krb5_get_pw_salt, [AC_DEFINE(HAVE_KRB5_GET_PW_SALT,1,[Whether krb5_get_pw_salt is available])]) + AC_CHECK_LIB(krb5, krb5_string_to_key_salt, [AC_DEFINE(HAVE_KRB5_STRING_TO_KEY_SALT,1,[Whether krb5_string_to_key_salt is available])]) + AC_CHECK_LIB(krb5, krb5_auth_con_setkey, [AC_DEFINE(HAVE_KRB5_AUTH_CON_SETKEY,1,[Whether krb5_auth_con_setkey is available])]) + AC_CHECK_LIB(krb5, krb5_auth_con_setuseruserkey, [AC_DEFINE(HAVE_KRB5_AUTH_CON_SETUSERUSERKEY,1,[Whether krb5_auth_con_setuseruserkey is available])]) + AC_CHECK_LIB(krb5, krb5_locate_kdc, [AC_DEFINE(HAVE_KRB5_LOCATE_KDC,1,[Whether krb5_locate_kdc is available])]) + AC_CHECK_LIB(krb5, krb5_get_permitted_enctypes, [AC_DEFINE(HAVE_KRB5_GET_PERMITTED_ENCTYPES,1,[Whether krb5_get_permitted_enctypes is available])]) + AC_CHECK_LIB(krb5, krb5_get_default_in_tkt_etypes, [AC_DEFINE(HAVE_KRB5_GET_DEFAULT_IN_TKT_ETYPES,1,[Whether krb5_get_default_in_tkt_etypes is available])]) + AC_CHECK_LIB(krb5, krb5_free_ktypes, [AC_DEFINE(HAVE_KRB5_FREE_KTYPES,1,[Whether krb5_free_ktypes is available])]) + +AC_CACHE_CHECK([for addrtype in krb5_address],samba_cv_HAVE_ADDRTYPE_IN_KRB5_ADDRESS,[ +AC_TRY_COMPILE([#include <krb5.h>], +[krb5_address kaddr; kaddr.addrtype = ADDRTYPE_INET;], +samba_cv_HAVE_ADDRTYPE_IN_KRB5_ADDRESS=yes,samba_cv_HAVE_ADDRTYPE_IN_KRB5_ADDRESS=no)]) +if test x"$samba_cv_HAVE_ADDRTYPE_IN_KRB5_ADDRESS" = x"yes"; then + AC_DEFINE(HAVE_ADDRTYPE_IN_KRB5_ADDRESS,1,[Whether the krb5_address struct has a addrtype property]) +fi + +AC_CACHE_CHECK([for addr_type in krb5_address],samba_cv_HAVE_ADDR_TYPE_IN_KRB5_ADDRESS,[ +AC_TRY_COMPILE([#include <krb5.h>], +[krb5_address kaddr; kaddr.addr_type = KRB5_ADDRESS_INET;], +samba_cv_HAVE_ADDR_TYPE_IN_KRB5_ADDRESS=yes,samba_cv_HAVE_ADDR_TYPE_IN_KRB5_ADDRESS=no)]) +if test x"$samba_cv_HAVE_ADDR_TYPE_IN_KRB5_ADDRESS" = x"yes"; then + AC_DEFINE(HAVE_ADDR_TYPE_IN_KRB5_ADDRESS,1,[Whether the krb5_address struct has a addr_type property]) +fi + +AC_CACHE_CHECK([for enc_part2 in krb5_ticket],samba_cv_HAVE_KRB5_TKT_ENC_PART2,[ +AC_TRY_COMPILE([#include <krb5.h>], +[krb5_ticket tkt; tkt.enc_part2->authorization_data[0]->contents = NULL;], +samba_cv_HAVE_KRB5_TKT_ENC_PART2=yes,samba_cv_HAVE_KRB5_TKT_ENC_PART2=no)]) +if test x"$samba_cv_HAVE_KRB5_TKT_ENC_PART2" = x"yes"; then + AC_DEFINE(HAVE_KRB5_TKT_ENC_PART2,1,[Whether the krb5_ticket struct has a enc_part2 property]) +fi + +AC_CACHE_CHECK([for keyvalue in krb5_keyblock],samba_cv_HAVE_KRB5_KEYBLOCK_KEYVALUE,[ +AC_TRY_COMPILE([#include <krb5.h>], +[krb5_keyblock key; key.keyvalue.data = NULL;], +samba_cv_HAVE_KRB5_KEYBLOCK_KEYVALUE=yes,samba_cv_HAVE_KRB5_KEYBLOCK_KEYVALUE=no)]) +if test x"$samba_cv_HAVE_KRB5_KEYBLOCK_KEYVALUE" = x"yes"; then + AC_DEFINE(HAVE_KRB5_KEYBLOCK_KEYVALUE,1,[Whether the krb5_keyblock struct has a keyvalue property]) +fi + +AC_CACHE_CHECK([for ENCTYPE_ARCFOUR_HMAC_MD5],samba_cv_HAVE_ENCTYPE_ARCFOUR_HMAC_MD5,[ +AC_TRY_COMPILE([#include <krb5.h>], +[krb5_enctype enctype; enctype = ENCTYPE_ARCFOUR_HMAC_MD5;], +samba_cv_HAVE_ENCTYPE_ARCFOUR_HMAC_MD5=yes,samba_cv_HAVE_ENCTYPE_ARCFOUR_HMAC_MD5=no)]) +if test x"$samba_cv_HAVE_ENCTYPE_ARCFOUR_HMAC_MD5" = x"yes"; then + AC_DEFINE(HAVE_ENCTYPE_ARCFOUR_HMAC_MD5,1,[Whether the ENCTYPE_ARCFOUR_HMAC_MD5 key type is available]) +fi + + ######################################################## + # now see if we can find the krb5 libs in standard paths + # or as specified above + AC_CHECK_LIB(krb5, krb5_mk_req_extended, [LIBS="$LIBS -lkrb5"; + AC_DEFINE(HAVE_KRB5,1,[Whether KRB5 is available])]) + + ######################################################## + # now see if we can find the gssapi libs in standard paths + AC_CHECK_LIB(gssapi_krb5, gss_display_status, [LIBS="$LIBS -lgssapi_krb5"; + AC_DEFINE(HAVE_GSSAPI,1,[Whether GSSAPI is available])]) + +fi + +######################################################## +# Compile with LDAP support? + +with_ldap_support=yes +AC_MSG_CHECKING([whether to use LDAP]) + +AC_ARG_WITH(ldap, +[ --with-ldap LDAP support (default yes)], +[ case "$withval" in + no) + with_ldap_support=no + ;; + esac ]) + +AC_MSG_RESULT($with_ldap_support) + +if test x"$with_ldap_support" = x"yes"; then + + ################################################################## + # we might need the lber lib on some systems. To avoid link errors + # this test must be before the libldap test + AC_CHECK_LIB(lber, ber_scanf, [LIBS="$LIBS -llber"]) + + ######################################################## + # now see if we can find the ldap libs in standard paths + if test x$have_ldap != xyes; then + AC_CHECK_LIB(ldap, ldap_domain2hostlist, [LIBS="$LIBS -lldap"; + AC_DEFINE(HAVE_LDAP,1,[Whether ldap is available])]) + + ######################################################## + # If we have LDAP, does it's rebind procedure take 2 or 3 arguments? + # Check found in pam_ldap 145. + AC_CHECK_FUNCS(ldap_set_rebind_proc) + AC_CACHE_CHECK(whether ldap_set_rebind_proc takes 3 arguments, pam_ldap_cv_ldap_set_rebind_proc, [ + AC_TRY_COMPILE([ + #include <lber.h> + #include <ldap.h>], [ldap_set_rebind_proc(0, 0, 0);], [pam_ldap_cv_ldap_set_rebind_proc=3], [pam_ldap_cv_ldap_set_rebind_proc=2]) ]) + AC_DEFINE_UNQUOTED(LDAP_SET_REBIND_PROC_ARGS, $pam_ldap_cv_ldap_set_rebind_proc, [Number of arguments to ldap_set_rebind_proc]) + fi +fi + + check for a PAM clear-text auth, accounts, password and session support +with_pam_for_crypt=no +AC_MSG_CHECKING(whether to use PAM) +AC_ARG_WITH(pam, +[ --with-pam Include PAM support (default=no)], +[ case "$withval" in + yes) + AC_MSG_RESULT(yes) + AC_DEFINE(WITH_PAM,1,[Whether to include PAM support]) + AUTHLIBS="$AUTHLIBS -lpam" + with_pam_for_crypt=yes + ;; + *) + AC_MSG_RESULT(no) + ;; + esac ], + AC_MSG_RESULT(no) +) diff --git a/source4/nsswitch/config.m4 b/source4/nsswitch/config.m4 new file mode 100644 index 0000000000..2d5efe0eb6 --- /dev/null +++ b/source4/nsswitch/config.m4 @@ -0,0 +1,105 @@ +################################################# +# Check whether winbind is supported on this platform. If so we need to +# build and install client programs, sbin programs and shared libraries + +AC_MSG_CHECKING(whether to build winbind) + +# Initially, the value of $host_os decides whether winbind is supported + +case "$host_os" in + *linux*|*irix*) + HAVE_WINBIND=yes + ;; + *solaris*) + HAVE_WINBIND=yes + WINBIND_NSS_EXTRA_OBJS="nsswitch/winbind_nss_solaris.o" + WINBIND_NSS_EXTRA_LIBS="-lsocket" + ;; + *hpux11*) + HAVE_WINBIND=yes + WINBIND_NSS_EXTRA_OBJS="nsswitch/winbind_nss_solaris.o" + ;; + *) + HAVE_WINBIND=no + winbind_no_reason=", unsupported on $host_os" + ;; +esac + +AC_SUBST(WINBIND_NSS_EXTRA_OBJS) +AC_SUBST(WINBIND_NSS_EXTRA_LIBS) + +# Check the setting of --with-winbindd + +AC_ARG_WITH(winbind, +[ --with-winbind Build winbind (default, if supported by OS)], +[ + case "$withval" in + yes) + HAVE_WINBIND=yes + ;; + no) + HAVE_WINBIND=no + winbind_reason="" + ;; + esac ], +) + +# We need unix domain sockets for winbind +if test x"$HAVE_WINBIND" = x"yes"; then + if test x"$samba_cv_unixsocket" = x"no"; then + winbind_no_reason=", no unix domain socket support on $host_os" + HAVE_WINBIND=no + fi +fi + +# Display test results + +if test x"$HAVE_WINBIND" = x"yes"; then + AC_MSG_RESULT(yes) + AC_DEFINE(WITH_WINBIND,1,[Whether to build winbind]) + + EXTRA_BIN_PROGS="$EXTRA_BIN_PROGS bin/wbinfo\$(EXEEXT)" + EXTRA_SBIN_PROGS="$EXTRA_SBIN_PROGS bin/winbindd\$(EXEEXT)" + if test x"$BLDSHARED" = x"true"; then + case "$host_os" in + *irix*) + SHLIB_PROGS="$SHLIB_PROGS nsswitch/libns_winbind.so" + ;; + *) + SHLIB_PROGS="$SHLIB_PROGS nsswitch/libnss_winbind.so" + ;; + esac + if test x"$with_pam" = x"yes"; then + SHLIB_PROGS="$SHLIB_PROGS nsswitch/pam_winbind.so" + fi + fi +else + AC_MSG_RESULT(no$winbind_no_reason) +fi + +# Solaris has some extra fields in struct passwd that need to be +# initialised otherwise nscd crashes. Unfortunately autoconf < 2.50 +# doesn't have the AC_CHECK_MEMBER macro which would be handy for checking +# this. + +#AC_CHECK_MEMBER(struct passwd.pw_comment, +# AC_DEFINE(HAVE_PASSWD_PW_COMMENT, 1, [Defined if struct passwd has pw_comment field]), +# [#include <pwd.h>]) + +AC_CACHE_CHECK([whether struct passwd has pw_comment],samba_cv_passwd_pw_comment, [ + AC_TRY_COMPILE([#include <pwd.h>],[struct passwd p; p.pw_comment;], + samba_cv_passwd_pw_comment=yes,samba_cv_passwd_pw_comment=no)]) +if test x"$samba_cv_passwd_pw_comment" = x"yes"; then + AC_DEFINE(HAVE_PASSWD_PW_COMMENT,1,[Whether struct passwd has pw_comment]) +fi + +#AC_CHECK_MEMBER(struct passwd.pw_age, +# AC_DEFINE(HAVE_PASSWD_PW_AGE, 1, [Defined if struct passwd has pw_age field]), +# [#include <pwd.h>]) + +AC_CACHE_CHECK([whether struct passwd has pw_age],samba_cv_passwd_pw_age, [ + AC_TRY_COMPILE([#include <pwd.h>],[struct passwd p; p.pw_age;], + samba_cv_passwd_pw_age=yes,samba_cv_passwd_pw_age=no)]) +if test x"$samba_cv_passwd_pw_age" = x"yes"; then + AC_DEFINE(HAVE_PASSWD_PW_AGE,1,[Whether struct passwd has pw_age]) +fi diff --git a/source4/ntvfs/config.m4 b/source4/ntvfs/config.m4 new file mode 100644 index 0000000000..22ab6dadfa --- /dev/null +++ b/source4/ntvfs/config.m4 @@ -0,0 +1,18 @@ +default_static_modules="$default_static_modules ntvfs_ipc ntvfs_simple ntvfs_print ntvfs_cifs" + +SMB_MODULE(ntvfs_cifs, \$(NTVFS_CIFS_OBJ), "bin/cifs.$SHLIBEXT$", NTVFS) +SMB_MODULE(ntvfs_simple, \$(NTVFS_SIMPLE_OBJ), "bin/ntvfs_simple.$SHLIBEXT$", NTVFS) +SMB_MODULE(ntvfs_print, \$(NTVFS_PRINT_OBJ), "bin/ntvfs_print.$SHLIBEXT$", NTVFS) +SMB_MODULE(ntvfs_ipc, \$(NTVFS_IPC_OBJ), "bin/ntvfs_ipc.$SHLIBEXT$", NTVFS) +SMB_MODULE(ntvfs_posix, \$(NTVFS_POSIX_OBJ), "bin/ntvfs_posix.$SHLIBEXT$", NTVFS) + +# Tank FS +SMB_MODULE(ntvfs_csm, \$(NTVFS_CSM_OBJ), "bin/ntvfs_csm.$SHLIBEXT$", NTVFS) +STFS_ENABLED="#" +if test "$MODULE_ntvfs_csm"; then + SMBD_EXTRA_LIBS="$SMBD_EXTRA_LIBS \$\(STFS_LIBS\)" + STFS_ENABLED= +fi +AC_SUBST(STFS_ENABLED) + +SMB_SUBSYSTEM(NTVFS,ntvfs/ntvfs_base.o) diff --git a/source4/passdb/config.m4 b/source4/passdb/config.m4 new file mode 100644 index 0000000000..b06aa7d5cf --- /dev/null +++ b/source4/passdb/config.m4 @@ -0,0 +1,11 @@ +######################################################## +# Compile with MySQL support? +AM_PATH_MYSQL([0.11.0],[MODULE_MYSQL=bin/mysql.so],[MODULE_MYSQL=]) +CFLAGS="$CFLAGS $MYSQL_CFLAGS" +AC_SUBST(MODULE_MYSQL) + +######################################################## +# Compile with XML support? +AM_PATH_XML2([2.0.0],[MODULE_XML=bin/xml.so],[MODULE_XML=]) +CFLAGS="$CFLAGS $XML_CFLAGS" +AC_SUBST(MODULE_XML) diff --git a/source4/popt/config.m4 b/source4/popt/config.m4 new file mode 100644 index 0000000000..7532c5826e --- /dev/null +++ b/source4/popt/config.m4 @@ -0,0 +1,31 @@ +################################################# +# Check to see if we should use the included popt + +AC_ARG_WITH(included-popt, +[ --with-included-popt use bundled popt library, not from system], +[ + case "$withval" in + yes) + INCLUDED_POPT=yes + ;; + no) + INCLUDED_POPT=no + ;; + esac ], +) +if test x"$INCLUDED_POPT" != x"yes"; then + AC_CHECK_LIB(popt, poptGetContext, + INCLUDED_POPT=no, INCLUDED_POPT=yes) +fi + +AC_MSG_CHECKING(whether to use included popt) +if test x"$INCLUDED_POPT" = x"yes"; then + AC_MSG_RESULT(yes) + BUILD_POPT='$(POPT_OBJS)' + FLAGS1="-I$srcdir/popt" +else + AC_MSG_RESULT(no) + LIBS="$LIBS -lpopt" +fi +AC_SUBST(BUILD_POPT) +AC_SUBST(FLAGS1) diff --git a/source4/printing/config.m4 b/source4/printing/config.m4 new file mode 100644 index 0000000000..ad5e4844e5 --- /dev/null +++ b/source4/printing/config.m4 @@ -0,0 +1,16 @@ +############################################ +# for cups support we need libcups, and a handful of header files + +AC_ARG_ENABLE(cups, +[ --enable-cups Turn on CUPS support (default=auto)]) + +if test x$enable_cups != xno; then + AC_PATH_PROG(CUPS_CONFIG, cups-config) + + if test "x$CUPS_CONFIG" != x; then + AC_DEFINE(HAVE_CUPS,1,[Whether we have CUPS]) + CFLAGS="$CFLAGS `$CUPS_CONFIG --cflags`" + LDFLAGS="$LDFLAGS `$CUPS_CONFIG --ldflags`" + PRINTLIBS="$PRINTLIBS `$CUPS_CONFIG --libs`" + fi +fi diff --git a/source4/python/config.m4 b/source4/python/config.m4 new file mode 100644 index 0000000000..6892b4d604 --- /dev/null +++ b/source4/python/config.m4 @@ -0,0 +1,27 @@ +################################################# +# Check if the user wants Python + +# At the moment, you can use this to set which Python binary to link +# against. (Libraries built for Python2.2 can't be used by 2.1, +# though they can coexist in different directories.) In the future +# this might make the Python stuff be built by default. + +# Defaulting python breaks the clean target if python isn't installed + +PYTHON= + +AC_ARG_WITH(python, +[ --with-python=PYTHONNAME build Python libraries], +[ case "${withval-python}" in + yes) + PYTHON=python + EXTRA_ALL_TARGETS="$EXTRA_ALL_TARGETS python_ext" + ;; + no) + PYTHON= + ;; + *) + PYTHON=${withval-python} + ;; + esac ]) +AC_SUBST(PYTHON) diff --git a/source4/web/config.m4 b/source4/web/config.m4 new file mode 100644 index 0000000000..f8bb33759d --- /dev/null +++ b/source4/web/config.m4 @@ -0,0 +1,17 @@ +################################################# +# set SWAT directory location +AC_ARG_WITH(swatdir, +[ --with-swatdir=DIR Where to put SWAT files ($ac_default_prefix/swat)], +[ case "$withval" in + yes|no) + # + # Just in case anybody does it + # + AC_MSG_WARN([--with-swatdir called without argument - will use default]) + ;; + * ) + swatdir="$withval" + ;; + esac]) + +AC_SUBST(swatdir) |