summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-06-29s3:smb2_server: make the logic in smbd_smb2_request_verify_creditcharge() ↵Stefan Metzmacher1-11/+23
simpler We just need a max_charge variable to make the algorithm independent of multi_credit support. metze
2012-06-29s3:smb2_server: simplify smbd_smb2_request_verify_creditcharge() a bit.Stefan Metzmacher1-6/+1
A credit charge of 0 is really not a special case, it just means the same as 1. metze
2012-06-29s3:smb2_negprot: support SMB2_CAP_LARGE_MTU on everything but port 139Stefan Metzmacher1-5/+8
In future we'll have other transports like RDMA. This makes NBT (tcp port 139) special instead of port 445. metze
2012-06-29s3:smb2_server: grant extra credits for multi-credit requestsStefan Metzmacher1-2/+10
metze
2012-06-29s3:smb2_server: implement credit granting similar to windowsStefan Metzmacher2-19/+53
This makes it much easier to compare traces. metze
2012-06-29s3:smb2_server: make sure sequence numbers don't wrap at UINT64_MAXStefan Metzmacher1-2/+17
metze
2012-06-29s3:smb2_server: make sure we don't grant more credits than we allowStefan Metzmacher2-35/+92
If the client hasn't consumed the lowest seqnum, but the distance between lowest and highest seqnum has reached max credits. In that case we should stop granting credits. metze
2012-06-29s3:smb2_server: check the credit_charge against the already granted creditsStefan Metzmacher1-7/+12
metze
2012-06-29s3:smb2_server: split out a smb2_validate_sequence_number() functionStefan Metzmacher1-40/+77
metze
2012-06-29s3:smb2_server: clear sequence window if we got the lowest sequence idStefan Metzmacher1-2/+2
Otherwise we'll never consume sequence id '0'. metze
2012-06-29s3:smb2_server: fix calculation of the next bitmap_offsetStefan Metzmacher1-1/+1
metze
2012-06-29s3:smb2_server: remove unused and confusing ↵Stefan Metzmacher2-8/+4
DEFAULT_SMB2_MAX_CREDIT_BITMAP_FACTOR metze
2012-06-29s3:smb2_server: call smbd_smb2_request_validate() also in ↵Stefan Metzmacher1-0/+6
smbd_smb2_first_negprot() We need to consume message_id 0, for SMB1 negprot starts. metze
2012-06-29s3:smb2_server: start the connection with one credit granted to the clientStefan Metzmacher1-1/+1
metze
2012-06-28s3: fine tune and clean up statvfs testsBjörn Jacke2-9/+8
This should also fix the build on Tru64. Tru64 has a POSIX compliant statvfs() function while most *BSD systems ignore POSIX. Autobuild-User(master): Björn Jacke <bj@sernet.de> Autobuild-Date(master): Thu Jun 28 23:07:23 CEST 2012 on sn-devel-104
2012-06-28docs-xml: fix typos and format in smb.conf server max protocol manBjörn Baumbach4-25/+51
2012-06-28packaging(RHEL-CTDB): fix build dependenciesBjörn Baumbach1-2/+2
Building manual pages needs rsync for copying built mans. source3/script/installmo.sh calls msgfmt, thats part of gettext.
2012-06-28selftest: run pdbtest against s3dc as wellAndrew Bartlett2-4/+4
This validates the password expiry, account disable in the s3 auth code and the save/restore of values in tdbsam. It also provides the first test of some net sam set subcommands. Andrew Bartlett Autobuild-User(master): Andrew Bartlett <abartlet@samba.org> Autobuild-Date(master): Thu Jun 28 20:39:38 CEST 2012 on sn-devel-104
2012-06-28selftest: use a loop rather than declare tests for both dc and s3dcAndrew Bartlett1-16/+16
2012-06-28librpc/ndr: Initilaise the remainder of struct dom_sid after a pullAndrew Bartlett1-0/+1
This copes with the fact that r->sub_auths is a fixed-size array, not an allocated pointer, and so will still have some bytes no filled in if the sid did not have a MAX_SUB_AUTHS sub-authorities. Andrew Bartlett
2012-06-28s4-torture: fix typo in samlogon test.Günther Deschner1-1/+1
Guenther Autobuild-User(master): Günther Deschner <gd@samba.org> Autobuild-Date(master): Thu Jun 28 18:43:46 CEST 2012 on sn-devel-104
2012-06-28s4-torture: use torture context for printing debug output.Günther Deschner1-111/+97
Guenther
2012-06-28s3: Fix compilation of pthreadpool_sync.c on platforms without pthread.hVolker Lendecke1-1/+0
Signed-off-by: Bjoern Jacke <bj@sernet.de> Autobuild-User(master): Björn Jacke <bj@sernet.de> Autobuild-Date(master): Thu Jun 28 16:43:13 CEST 2012 on sn-devel-104
2012-06-28s3:smbd: change nt_open_pipe() to uint16_t pnum/fnumStefan Metzmacher1-3/+3
This is SMB1 code... metze Autobuild-User(master): Stefan Metzmacher <metze@samba.org> Autobuild-Date(master): Thu Jun 28 14:47:45 CEST 2012 on sn-devel-104
2012-06-28s3:smb2_create: add usefull DEBUG() messageStefan Metzmacher1-0/+3
All calls which take an file handle have the same, so we should also log it, when we create a handle. metze Autobuild-User(master): Stefan Metzmacher <metze@samba.org> Autobuild-Date(master): Thu Jun 28 12:41:49 CEST 2012 on sn-devel-104
2012-06-28s3:smbd/files: fsp->fnum is uint64_t not int!Stefan Metzmacher1-3/+3
metze
2012-06-28s3:brlock: s/int/uint64_t for fnumStefan Metzmacher1-1/+1
fsp->fnum and lock->fnum are uint64_t already and we should not truncate the value here. Currently this doesn't matter as we only use 16-bit. But as 'int' is int32_t and we later compare fnum with lock->fnum == fnum, the cast from int32_t to uint64_t goes via int64_t instead of uint32_t. This means even if fsp->fnum just uses 32-bit of the uint64_t we'll get the wrong result, as the implicit cast from a negative int32_t value to uint64_t adds 0xFFFFFFFF00000000. metze
2012-06-28s3:brlock: add some const to print_lock_struct()Stefan Metzmacher1-1/+1
metze
2012-06-28s3:wscript: use LOCKING subsystem for smbtorture3Stefan Metzmacher1-1/+2
metze
2012-06-28source4/smbd/pidfile: don't panic if pid file is corrupt.Rusty Russell1-0/+3
In particular, on a virtual machine after a forced reboot, it contained "Ille" instead of a valid PID. Given it was the right length, I'm assuming it was filesystem corruption. process_exists_by_pid() then panics, when given a pid < 1. Reported-by: lostogre on #samba-technical Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Autobuild-User(master): Rusty Russell <rusty@rustcorp.com.au> Autobuild-Date(master): Thu Jun 28 05:19:24 CEST 2012 on sn-devel-104
2012-06-28replace: define INT64_MAX when not definedBjörn Jacke1-0/+4
Tru64 doesn't have any stdint.h Autobuild-User(master): Björn Jacke <bj@sernet.de> Autobuild-Date(master): Thu Jun 28 00:45:58 CEST 2012 on sn-devel-104
2012-06-27s3-param: Rename loadparm_s3_context -> loadparm_s3_helpersAndrew Bartlett23-33/+33
This helps clarify the role of this structure and wrapper function. The purpose here is to provide helper functions to the lib/param loadparm_context that point back at the s3 lp_ functions. This allows a struct loadparm_context to be passed to any point in the code, and always refer to the correct loadparm system. If this has not been set, the variables loaded in the lib/param code will be returned. As requested by Michael Adam. Andrew Bartlett Autobuild-User(master): Andrew Bartlett <abartlet@samba.org> Autobuild-Date(master): Wed Jun 27 17:11:16 CEST 2012 on sn-devel-104
2012-06-27s3-pdb_samba4: Remove dupliate profilePath handlingAndrew Bartlett1-6/+0
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org> Autobuild-Date(master): Wed Jun 27 13:16:26 CEST 2012 on sn-devel-104
2012-06-27s4-selftest: expand passdb testingAndrew Bartlett2-0/+102
This tests pdb_samba4 in the first instance
2012-06-27s3-pdbtest: Initialise more elements for testingAndrew Bartlett1-0/+8
If these were left as defaults, they cause issues when the backend (pdb_samba4) returns the internal defaults from the directory, not the defaults from samu_new() Andrew Bartlett
2012-06-27s3-pdb_samba4: Add support for lastLogon and lastLogoffAndrew Bartlett1-2/+10
2012-06-27s3-pdb_samba4: Fix time handling, use nt_time_to_unix()Andrew Bartlett1-1/+1
This matches 478d74fe1447c4588b14ef7040c8c13339d54026 which I failed to merge from pdb_ads. Andrew Bartlett
2012-06-27lib/ldb: Print trace messages for modify correctlyAndrew Bartlett1-1/+1
2012-06-27s4-selftest: Test login with a password expired userAndrew Bartlett2-0/+34
This uses rkpty to test changing an expired password. Andrew Bartlett
2012-06-27s4-dsdb when setting DSDB_CONTROL_PASSWORD_BYPASS_LAST_SET_OID make it ↵Andrew Bartlett1-1/+7
non-critical
2012-06-27s4-dsdb: Remove hooks for non-directory password handlingAndrew Bartlett1-12/+0
This was an interesting hack, and the local_password module still exists, but until it has a use case and a test case, remove the bypass of password_hash. Andrew Bartlett
2012-06-27selftest: allow NSS_WRAPPER_* vars to be exported to the environmentAndrew Bartlett1-1/+6
2012-06-27selftest: Add extra users to nss_wrapperAndrew Bartlett2-2/+4
These will be used for a test using pdbtest and to run the client test environment under nss_wrapper. Andrew Bartlett
2012-06-27s3-pdbtest: show mis-matching timesAndrew Bartlett1-4/+12
2012-06-27s3:registry: change reg_import.c according to coding guidelines.Michael Adam1-53/+47
Autobuild-User(master): Michael Adam <obnox@samba.org> Autobuild-Date(master): Wed Jun 27 10:07:54 CEST 2012 on sn-devel-104
2012-06-27s3:registry: use TALLOC_CTX * instead of const void * in reg_import_adapter()Michael Adam2-2/+2
2012-06-27s3: add a tool "cclean" to cleanup orphaned entries from connections.tdbGregor Beck3-1/+324
Signed-off-by: Michael Adam <obnox@samba.org>
2012-06-27s3:conn_tdb: add a function connections_fetch_entry_ext() that also takes ↵Gregor Beck2-5/+19
the cnum and have connections_fetch_entry() call connections_fetch_entry_ext(). Signed-off-by: Michael Adam <obnox@samba.org>
2012-06-27s3:lib:dbwrap: fix return value of db_ctdb_traverse[_read] for ↵Gregor Beck1-6/+17
non-persistent dbs to return the number of traversed records upon successful traverse. Signed-off-by: Michael Adam <obnox@samba.org>
2012-06-27s3-printing: fix broken print_job_get_name() returnDavid Disseldorp1-1/+2
Autobuild-User(master): David Disseldorp <ddiss@samba.org> Autobuild-Date(master): Wed Jun 27 04:04:56 CEST 2012 on sn-devel-104
generated by cgit (git 2.34.1) at 2024-12-02 07:28:39 +0000