summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-02-12s3:g_lock: remove a nested event loop, replacing the inner loop by selectMichael Adam1-38/+101
This made smbd crash in g_lock_lock() when trying to start a transaction on a db with an already started transaction, e.g. in a tcon_and_X where the share_info.tdb was not yet initialized but share_info.tdb was already locked by another process or writing acces to the winreg rpc pipe where the registry tdb was already locked by another process. What we really _want_ to do here by design is to react to MSG_DBWRAP_G_LOCK_RETRY messages that are either sent by a client doing g_lock_unlock or by ourselves when we receive a CTDB_SRVID_SAMBA_NOTIFY or CTDB_SRVID_RECONFIGURE message from ctdbd, i.e. when either a client holding a lock or a complete node has died. Doing this properly involves calling tevent_loop_once(), but doing this here with the main ctdbd messaging context creates a nested event loop when g_lock_lock() is called from the main event loop. So as a quick fix, we act a little corasely here: we do a select on the ctdb connection fd and when it is readable or we get EINTR, then we retry without actually parsing any ctdb packages or dispatching messages. This means that we retry more often than necessary and intended by design, but this does not harm and it is unobtrusive. When we have finished, the main loop will pick up all the messages and ctdb packets. The only extra twist is that we cannot use timed events here but have to handcode a timeout for select. Michael
2010-02-12s3:ctdb_conn: add ctdbd_conn_get_fd() to get the fd out of the ctdb connectionMichael Adam2-0/+7
Michael
2010-02-12s3:g_lock: remove an unreached code path.Michael Adam1-4/+0
Michael
2010-02-12s3:dbwrap_ctdb: fix reading/storing of special key __db_sequence_number__Michael Adam1-4/+2
The key for reading and writing was inconsistent due to a off by one data length. Michael
2010-02-12s3:dbwrap_ctdb: exit early when nothing has been written in transaction_commit.Michael Adam1-5/+9
This skips update of the __db_sequence_number__ record when nothing else has been written. There are transactions that are just openend and then nothing is written until transaction_commit is called. This is for instance the case with registry initialization routines: They start a transaction and only write somthing when the registry has not been initialized yet. So this change will skip many db_seqnum bumps and TRANS3_COMMIT roundtrips. Michael
2010-02-12s3:dbwrap_ctdb: fix brown paperbag bug in ctdb_transaction_commit.Michael Adam1-1/+1
I carefully prepared the return value only to "return 0;" at the bottom. :-( This may well have hit us for instance in the nested cancel case and produced random errors. Michael
2010-02-12s3:dbwrap_ctdb: fix logic error in pull_newest_from_marshall_buffer().Michael Adam1-1/+5
The logic bug was that if a record was found in the marshall buffer, then always the ctdb header of tha last record in the marshall buffer was returned, and not the ctdb header of the last occurrence of the requested record. This is fixed by introducing an additional temporary variable. Michael
2010-02-12s3:dbwrap_ctdb: fix an uninitialized variable.Michael Adam1-1/+1
Michael
2010-02-12s3:dbwrap_ctdb: fix two "may be used uninitialized" warningsMichael Adam1-0/+3
Michael
2010-02-12s3:dbwrap_ctdb: fix db_ctdb_fetch_db_seqnum_from_db() when NT_STATUS_NOT_FOUND.Michael Adam1-1/+5
Don't treat this as an error but return seqnum 0 instead. Michael
2010-02-12s3:dbwrap: If "-n" is given to dbwrap_torture, open db with CLEAR_IF_FIRSTVolker Lendecke1-0/+4
2010-02-12s3:build: remove checks for deprecated ctdb controls.Michael Adam1-35/+1
Michael
2010-02-12s3:dbwrap_ctdb: maintain a database sequence number that bumps in transactionsMichael Adam1-5/+116
For persistent databases, 64bit integer is kept in a special record __db_sequence_number__. This record is incremented with each completed transaction. The retry mechanism for failing TRANS3_COMMIT controls inside the db_ctdb_transaction_commit() function now relies one a modified behaviour of ctdbd's treatment of persistent databases in recoveries. Recently, a special treatment for persistent databases had been introduced in ctdb (1.0.108) to work around the problems with the orinal design of persistent transactions. Now with the rewrite we need to revert to the old behaviour that ctdb always takes the newest copies of all records. This change also paves the way for a next step, which will make recovery use the db seqnum to tell which node has the newest copy of a persistent db and use that node's copy. This will greatly reduce the amount of data transferred with each recovery. Michael
2010-02-12s3:dbwrap_ctdb: change db_ctdb_transaction_store() to return NTSTATUS.Michael Adam1-18/+12
The return values calculated by the callers were wrong anyways since the new marshalling code does not set the local tdbs tdb error code. Michael
2010-02-12s3:dbwrap_ctdb: update (C)Michael Adam1-1/+2
Michael
2010-02-12build: Add a configure check for CTDB_CONTROL_TRANS3_COMMIT.Michael Adam1-0/+17
This is the new implementation of ctdb transactions using the global lock feature. It is needed by the current dbwrap_ctdb code. Michael
2010-02-12s3: Add tdb_data_equalVolker Lendecke2-0/+9
2010-02-12s3:torture: add a test LOCAL-DBTRANS to torture dbwrap with transactions.Volker Lendecke1-0/+130
2010-02-12s3:dbwrap_ctdb: start rewrite of transactions using the global lock (g_lock)Michael Adam1-320/+160
This simplifies the transaction code a lot: * transaction_start essentially consists of acquiring a global lock. * No write operations at all are performed on the local database until the transaction is committed: Every store operation is just going into the marshall buffer. * The commit operation calls a new simplified TRANS3_COMMIT control in ctdb which rolls out thae changes to all nodes including the node that is performing the transaction. Michael
2010-02-12s3: setup debug for smbtortureVolker Lendecke1-0/+2
2010-02-12s3: Add ctdb_conn_msg_ctx()Volker Lendecke2-0/+6
2010-02-12s3: Implement global locks in a g_lock tdbVolker Lendecke11-7/+950
This is the basis to implement global locks in ctdb without depending on a shared file system. The initial goal is to make ctdb persistent transactions deterministic without too many timeouts.
2010-02-12s4:kdc Fill in created_by principal fieldSimo Sorce1-4/+7
2010-02-12s4:kdc Fix double free and uninitialized memory.Simo Sorce1-2/+13
In samba_kdc_trust_message2entry() on error, hdb_free_entry() may end up trying to access uninitialized memory or double free the hdb_entry.
2010-02-12testprogs: print all printerinfo levels in spoolss test.Günther Deschner1-2/+26
Guenther
2010-02-12s4:auth/credentials/credentials.c - Initialise the "lm_response" and ↵Matthias Dieter Wallnöfer1-0/+5
"nt_response" structures In some cases those structures are not initialised and the whole authentication system crashes with a SIGSEGV. Bug discovered by Matthieu Patou in bug #6755.
2010-02-12s4:getopt.py - set the password callback only when no password has been providedMatthias Dieter Wallnöfer1-4/+6
Previously the "no_pass" and "no_pass2" variables weren't handled correctly. Since at the initialisation of the "CredentialsOptions" we don't have any password at all. Only afterwards we could get one through "set_password". If a password is specified, use it. If no password is specified, consider the use fo an input mask on STDOUT. But if the loadparm context contains one prefer it over the input.
2010-02-12s4:net_drs_bind: make some more stuff staticStefan Metzmacher1-2/+2
metze
2010-02-12s4:net/drs: use the full path to "utils/net/drs/net_drs*.h"Stefan Metzmacher5-5/+5
This fixes the build with automatic dependecies. metze
2010-02-12s3: notify_onelevel does not use seqnums, so don't open asking for itVolker Lendecke1-1/+1
2010-02-12spoolss: regenerate hand-marshalled ndr_pull_spoolss_DriverInfo101 after ↵Günther Deschner1-0/+1
ndr64 changes. Guenther
2010-02-12spoolss: make sure hand-marshalled spoolss_DriverInfo101 handles ↵Günther Deschner1-0/+30
relative_highest_offset. Guenther
2010-02-12spoolss: regenerate hand-marshalled ndr_push_spoolss_DriverInfo101 after ↵Günther Deschner1-1/+2
ndr64 changes. Guenther
2010-02-11Remove the code replaced by widelinks warning.Jeremy Allison1-7/+0
Jeremy.
2010-02-11Remove lp_safe_widelinks() -> convert to just lp_widelinks. Suggestion from ↵Jeremy Allison5-10/+26
Volker. Create widelinks_warning(int snum) to cover the message needed in make_connection. Jeremy.
2010-02-11s3 test: Make the netbios name test pass againKai Blin1-0/+2
2010-02-11s4: Switch to S3-style id mapping data types.Kai Blin14-82/+97
2010-02-11s4 idmap: Make the sid_to_xid and xid_to_sid calls static.Kai Blin1-4/+8
Looking at the winbind interface, we should only be using the bulk conversion calls.
2010-02-11libwbclient: Test wbcLookupName async functionsKai Blin1-0/+79
2010-02-11libwbclient: Implement wbcLookupName_send/recvKai Blin2-0/+137
2010-02-11libwbclient: Implement wbcAuthenticateUserEx_send/recvKai Blin2-0/+280
2010-02-11libwbclient: Implement wbcLookupSid_send/recvKai Blin2-0/+140
2010-02-11libwbclient: Implement wbcGidToSid_send/recvKai Blin2-0/+117
2010-02-11libwbclient: Implement wbcSidToGid_send/recvKai Blin2-0/+107
2010-02-11libwbclient: Implement wbcUidToSid_send/recvKai Blin2-0/+116
2010-02-11libwbclient: Implement wbcSidToUid_send/recvKai Blin2-0/+108
2010-02-11libwbclient: Add wbcInterfaceDetails_send/recvKai Blin3-5/+231
2010-02-11libwbclient: Add wbcDomainInfo_send/recv callsKai Blin2-1/+155
2010-02-11libwbclient: Add wbcDomainName_send/recv callKai Blin2-0/+101
2010-02-11libwbclient: Add wbcNetbiosName_send/recv callsKai Blin2-0/+102
generated by cgit (git 2.34.1) at 2024-11-09 11:58:20 +0000