summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-01-16smb2_ioctl: perform locking around copychunk requestsDavid Disseldorp1-17/+137
For each chunk in a copychunk request, take a read and write lock on the source and destination files respectively. Also change the resume key format to use a combination of the persistent and volatile handles. Thanks to Metze for his help on this. Reviewed by: Jeremy Allison <jra@samba.org>
2013-01-16smbd: split out file_fsp_get from file_fsp_smb2David Disseldorp2-10/+27
Obtain the files_struct from smb2req, persistent_id and volatile_id. Reviewed by: Jeremy Allison <jra@samba.org>
2013-01-16torture: skip FSCTL_SRV_ENUM_SNAPS test when not supportedDavid Disseldorp2-1/+6
If FSCTL_SRV_ENUM_SNAPS fails with NT_STATUS_NOT_SUPPORTED then skip the test, this means we can run the full ioctl test suite as part of autobuild. Reviewed by: Jeremy Allison <jra@samba.org>
2013-01-16selftest: enable samba3.smb2.ioctl tests against s3fsDavid Disseldorp1-7/+2
These tests are now expected to pass with copy-chunk support now implemented. This effectively reverts 632b1042aed94a71d810613fcdbbfecf615a25fa. Reviewed by: Jeremy Allison <jra@samba.org>
2013-01-16smb2_ioctl: remove ioctl error response assumptionsDavid Disseldorp3-20/+149
MS-SMB2 3.3.4.4 documents cases where a ntstatus indicating an error should not be considered a failure. In such a case the output data buffer should be sent to the client rather than an error response packet. Add a new fsctl copy_chunk test to confirm field limits are sent back in response to an oversize chunk request. Reviewed by: Jeremy Allison <jra@samba.org>
2013-01-16smb2_ioctl: add support for FSCTL_SRV_COPYCHUNKDavid Disseldorp1-4/+231
SMB2 clients can issue FSCTL_SRV_COPYCHUNK requests in order to copy data between files on the server side only, rather than reading data then writing back from the client. FSCTL_SRV_COPYCHUNK is used by default for Explorer SMB2 file copies on Windows Server 2012. 2.2.32.1 SRV_COPYCHUNK_RESPONSE in [MS-SMB2] describes the requirement for the server to provide maximum copychunk request size limits in ioctl responses carrying STATUS_INVALID_PARAMETER. Reviewed by: Jeremy Allison <jra@samba.org>
2013-01-16s3-vfs: add copy_chunk vfs hooksDavid Disseldorp9-3/+411
copy_chunk copies n bytes from a source file at a specific offset to a destination file at a given offset. This interface will be used in handling smb2 FSCTL_SRV_COPYCHUNK ioctl requests. Use a pread/pwrite loop in vfs_default, so that requests referring to the same src and dest file are possible. Provide send and receive hooks for copy chunk VFS interface, allowing asynchronous behaviour. Check whether the request source offset + length exceeds the current size. Return STATUS_INVALID_VIEW_SIZE under such a condition, matching Windows server behaviour. Reviewed by: Jeremy Allison <jra@samba.org>
2013-01-16smb2_ioctl: add FSCTL_SRV_REQUEST_RESUME_KEY supportDavid Disseldorp3-2/+49
Use existing ioctl IDL infrastructure for marshalling. Support for this ioctl is a prerequisite for FSCTL_SRV_COPYCHUNK handling. The client-opaque resume key is constructed using the server side dev/inode file identifier. Reviewed by: Jeremy Allison <jra@samba.org>
2013-01-16smb2_ioctl: split ioctl handler code on device typeDavid Disseldorp9-355/+686
Add per device type ioctl handler source files for FSCTL_DFS, FSCTL_FILESYSTEM, FSCTL_NAMED_PIPE and FSCTL_NETWORK_FILESYSTEM. Reviewed by: Jeremy Allison <jra@samba.org>
2013-01-16smb2_ioctl: split ioctl handlers into separate funtionsDavid Disseldorp1-154/+173
Reviewed by: Jeremy Allison <jra@samba.org>
2013-01-16build(waf): fix the abi_match for the pdb libraryMichael Adam1-1/+1
The global wildcard match is automatically added by the parsing code if the global match list is empty. Specifying an explicit '*' as the only global match lets the parsing code add a second '*' to the local list, which is an error tolerated on my linux by ld (the GNU linker), but not by the stricter GNU ELF linker "gold". Pair-Programmed-With: Gregor Beck <gbeck@sernet.de> Signed-off-by: Gregor Beck <gbeck@sernet.de> Signed-off-by: Michael Adam <obnox@samba.org> Signed-off-by: Alexander Bokovoy <ab@samba.org> Autobuild-User(master): Alexander Bokovoy <ab@samba.org> Autobuild-Date(master): Wed Jan 16 21:31:00 CET 2013 on sn-devel-104
2013-01-16s4-torture: add ndr64 spoolss openprinterex to ndr test.Günther Deschner1-0/+28
Guenther Signed-off-by: Günther Deschner <gd@samba.org> Reviewed-by: Andreas Schneider <asn@samba.org> Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org> Autobuild-Date(master): Wed Jan 16 13:26:53 CET 2013 on sn-devel-104
2013-01-16s4-torture: allow to do ndr tests with flags, not only ndr_flags.Günther Deschner2-3/+14
Guenther Signed-off-by: Günther Deschner <gd@samba.org> Reviewed-by: Andreas Schneider <asn@samba.org>
2013-01-16spoolss: Make OpenPrinterEx work with NDR64 by using UserInfo Container.Günther Deschner8-43/+42
Guenther Signed-off-by: Günther Deschner <gd@samba.org> Reviewed-by: Andreas Schneider <asn@samba.org>
2013-01-15test: dbwrap_tool requires --persistent for the registry nowVolker Lendecke2-2/+2
Reviewed-by: Michael Adam <obnox@samba.org> Autobuild-User(master): Michael Adam <obnox@samba.org> Autobuild-Date(master): Tue Jan 15 16:31:35 CET 2013 on sn-devel-104
2013-01-15docs: document the "--persistent" option in dbwrap_tool(1)Michael Adam1-5/+13
Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-by: Volker Lendecke <vl@samba.org>
2013-01-15s3:dbwrap_tool: add --persistent switch and mode for non-persistent DBsMichael Adam1-12/+45
This changes the default for dbwrap_tool to open a DB as non-persistent. Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-by: Volker Lendecke <vl@samba.org>
2013-01-15dbwrap: add dbwrap_is_persistent()Michael Adam2-0/+6
Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-by: Volker Lendecke <vl@samba.org>
2013-01-15docs: document the command line options in dbwrap_tool(1)Michael Adam1-3/+7
Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-by: Volker Lendecke <vl@samba.org>
2013-01-15docs: use the popt.common.samba.client entity in samba-tool(8)Michael Adam1-27/+1
Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-by: Volker Lendecke <vl@samba.org>
2013-01-15docs: use the entities popt.common.samba.server and stdarg.help in samba(8)Michael Adam1-31/+2
Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-by: Volker Lendecke <vl@samba.org>
2013-01-15docs: add popt.common.samba.server and popt.common.samba.client entitiesMichael Adam1-0/+11
These are comprised by the popt.common.samba entity and the stdarg.server.debug or the stdarg.client.debut entity, respectively. The difference is only in the default value of the debug level setting. Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-by: Volker Lendecke <vl@samba.org>
2013-01-15docs: fix the stdarg.configfile entity to print a "=" sign after the long optionMichael Adam1-1/+1
This makes the appearance equal to the other options like --debuglevel or --log-basename. Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-by: Volker Lendecke <vl@samba.org>
2013-01-15docs: use the stdarg.option entity in the popt.common.samba entityMichael Adam1-0/+1
Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-by: Volker Lendecke <vl@samba.org>
2013-01-15docs: add an entity stdarg.option for the "--option" command line parameterMichael Adam1-0/+12
Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-by: Volker Lendecke <vl@samba.org>
2013-01-15wafsamba: use additional xml catalog file (bug #9512)Björn Baumbach1-1/+2
Add additional "/usr/local/share/xml/catalog" catalog file platforms (used by freebsd). Fix manual page build on freebsd. Signed-off-by: Björn Baumbach <bb@sernet.de> Reviewed-by: Michael Adam <obnox@samba.org> Reviewed-by: Volker Lendecke <vl@samba.org>
2013-01-15smb.conf(5): client min protocol: add hint at list of available protocolsBjörn Baumbach2-10/+13
And fix the format. Signed-off-by: Björn Baumbach <bb@sernet.de> Reviewed-by: Michael Adam <obnox@samba.org> Reviewed-by: Volker Lendecke <vl@samba.org>
2013-01-15smb.conf(5): server min protocol: add hint at list of available protocolsBjörn Baumbach1-7/+10
And fix the format. Signed-off-by: Björn Baumbach <bb@sernet.de> Reviewed-by: Michael Adam <obnox@samba.org> Reviewed-by: Volker Lendecke <vl@samba.org>
2013-01-15build(waf)-libreplace: remove redundant check for flistea functionBjörn Baumbach1-1/+1
Signed-off-by: Björn Baumbach <bb@sernet.de> Reviewed-by: Michael Adam <obnox@samba.org> Reviewed-by: Volker Lendecke <vl@samba.org>
2013-01-15ntlm_auth(1): fix many format issues and and make examples visibleBjörn Baumbach1-87/+108
"<example>" is no child of "<para>". So these examples were not visible. Using a varlist instead may be not the best way but it does look nice. Signed-off-by: Björn Baumbach <bb@sernet.de> Reviewed-by: Michael Adam <obnox@samba.org> Reviewed-by: Volker Lendecke <vl@samba.org>
2013-01-15build(waf): docs-xml: build new dbwrap_tool.8 manual pageBjörn Baumbach1-0/+1
Signed-off-by: Björn Baumbach <bb@sernet.de> Reviewed-by: Michael Adam <obnox@samba.org> Reviewed-by: Volker Lendecke <vl@samba.org>
2013-01-15docs-xml: add dbwrap_tool.1 manual pageBjörn Baumbach1-0/+160
Signed-off-by: Björn Baumbach <bb@sernet.de> Reviewed-by: Michael Adam <obnox@samba.org> Reviewed-by: Volker Lendecke <vl@samba.org>
2013-01-15dsdb: Add test for modification of two attributes, one permitted, one denied ↵Andrew Bartlett1-0/+15
(bug #9554 - CVE-2013-0172) Reviewed-by: Stefan Metzmacher <metze@samba.org> (cherry picked from commit 8bafe0871526cd5d5e7fdbe123ab661379f64cb1) Autobuild-User(master): Stefan Metzmacher <metze@samba.org> Autobuild-Date(master): Tue Jan 15 14:03:47 CET 2013 on sn-devel-104
2013-01-15dsdb-acl: Run sec_access_check_ds on each attribute proposed to modify (bug ↵Andrew Bartlett1-28/+27
#9554 - CVE-2013-0172) This seems inefficient, but is needed for correctness. The alternative might be to have the sec_access_check_ds code confirm that *all* of the nodes in the object tree have been cleared to node->remaining_bits == 0. Otherwise, I fear that write access to one attribute will become write access to all attributes. Andrew Bartlett Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org> (cherry picked from commit d776fd807e0c9a62f428ce666ff812655f98bc47)
2013-01-15libcli/security: Ensure to fill in remaining_access for the initial case ↵Andrew Bartlett1-0/+1
(bug #9554 - CVE-2013-0172) It is critically important that we initialise this element as otherwise all access is permitted. Andrew Bartlett Reviewed-by: Stefan Metzmacher <metze@samba.org> (cherry picked from commit a75805490d96a85786287f5d0522dd7671d6816e)
2013-01-15tevent: Fix bug 9550 - sigprocmask does not work on FreeBSD to stop further ↵Jeremy Allison1-0/+29
signals in a signal handler Mask off signals the correct way from the signal handler. Signed-off-by: Jeremy Allison <jra@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org> Autobuild-User(master): Stefan Metzmacher <metze@samba.org> Autobuild-Date(master): Tue Jan 15 12:13:43 CET 2013 on sn-devel-104
2013-01-15lib/replace: Include sys/ucontext.h if available.Jeremy Allison1-0/+4
Signed-off-by: Jeremy Allison <jra@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org>
2013-01-15lib/replace: Add ucontext configure autoconf checks.Jeremy Allison1-0/+13
Signed-off-by: Jeremy Allison <jra@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org>
2013-01-15lib/replace: Add ucontext configure waf checks.Jeremy Allison1-1/+10
Signed-off-by: Jeremy Allison <jra@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org>
2013-01-15lib/replace: Add missing check for sys/wait.hJeremy Allison1-1/+1
Signed-off-by: Jeremy Allison <jra@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org>
2013-01-15smbd: Fix bug 9544, part 2Volker Lendecke1-0/+80
Plug in async pwrite Reviewed by: Jeremy Allison <jra@samba.org> Autobuild-User(master): Jeremy Allison <jra@samba.org> Autobuild-Date(master): Tue Jan 15 00:55:51 CET 2013 on sn-devel-104
2013-01-14smbd: Fix bug 9544, part 1Volker Lendecke1-3/+3
Adapt the sync function names Reviewed by: Jeremy Allison <jra@samba.org>
2013-01-14smbd: Always compile vfs_commitVolker Lendecke2-0/+2
There's no reason not to Reviewed by: Jeremy Allison <jra@samba.org>
2013-01-14configure: Fix bug 9546, aio_suspend detection on FreeBSDVolker Lendecke2-2/+2
NULL is not defined without some includes Reviewed by: Jeremy Allison <jra@samba.org>
2013-01-14Fix bug 9548: Correctly detect O_DIRECTVolker Lendecke2-11/+21
Reviewed by: Jeremy Allison <jra@samba.org> Autobuild-User(master): Jeremy Allison <jra@samba.org> Autobuild-Date(master): Mon Jan 14 21:16:23 CET 2013 on sn-devel-104
2013-01-14samr: Make use of posix_openptVolker Lendecke3-2/+6
Reviewed by: Jeremy Allison <jra@samba.org>
2013-01-14samr: Split up an assignment from an if conditionVolker Lendecke1-1/+2
Reviewed by: Jeremy Allison <jra@samba.org>
2013-01-14ldb: Move doxygen comments for ldb_connect to the right placeStephen Gallagher1-13/+12
Reviewed-by: Andreas Schneider <asn@samba.org> Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org> Autobuild-Date(master): Mon Jan 14 16:21:02 CET 2013 on sn-devel-104
2013-01-12dsdb: Make linked_attributes module GUID based for renamesAndrew Bartlett1-13/+64
This ensures that when we have the backlink out of sync with the forward link (perhaps due to another operation that has put the backlink handling in an end-of-transaction TODO list in repl_meta_data) that we do not error out, we just cope as well as we can. The GUID is the unique identifier, not the DN. Andrew Bartlett Reviewed-by: Stefan Metzmacher <metze@samba.org> Autobuild-User(master): Stefan Metzmacher <metze@samba.org> Autobuild-Date(master): Sat Jan 12 12:52:28 CET 2013 on sn-devel-104
2013-01-12selftest: skip base.dir2 tests as they just spin on modern ext4Andrew Bartlett1-0/+1
Reviewed-by: Stefan Metzmacher <metze@samba.org>