summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-06-19lib/dbwrap: depend directly on tdb, not tdb_compat.Rusty Russell1-1/+1
Simple change, as we get rid of tdb_compat in favour of either ntdb directly or dbwrap. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19lib/util_tdb: depend directly on tdb, not tdb_compat.Rusty Russell2-5/+5
Simple change, as we get rid of tdb_compat in favour of tdb directly. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: update documentation.Rusty Russell6-5821/+505
Update the design.lyx file with the latest status and the change in hashing. Also, refresh and add examples to the TDB_porting.txt file. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: optimize ntdb_fetch.Rusty Russell7-51/+59
We access the key on lookup, then access the data in the caller. It makes more sense to access both at once. We also put in a likely() for the case where the hash is not chained. Before: Adding 1000 records: 3644-3724(3675) ns (129656 bytes) Finding 1000 records: 1596-1696(1622) ns (129656 bytes) Missing 1000 records: 1409-1525(1452) ns (129656 bytes) Traversing 1000 records: 1636-1747(1668) ns (129656 bytes) Deleting 1000 records: 3138-3223(3175) ns (129656 bytes) Re-adding 1000 records: 3278-3414(3329) ns (129656 bytes) Appending 1000 records: 5396-5529(5426) ns (253312 bytes) Churning 1000 records: 9451-10095(9584) ns (253312 bytes) smbtorture results (--entries=1000) ntdb speed 183881-191112(188223) ops/sec After: Adding 1000 records: 3590-3701(3640) ns (129656 bytes) Finding 1000 records: 1539-1605(1566) ns (129656 bytes) Missing 1000 records: 1398-1440(1413) ns (129656 bytes) Traversing 1000 records: 1629-2015(1710) ns (129656 bytes) Deleting 1000 records: 3118-3236(3163) ns (129656 bytes) Re-adding 1000 records: 3235-3355(3275) ns (129656 bytes) Appending 1000 records: 5335-5444(5385) ns (253312 bytes) Churning 1000 records: 9350-9955(9494) ns (253312 bytes) smbtorture results (--entries=1000) ntdb speed 180559-199981(195106) ops/sec
2012-06-19ntdb: add -h arg to ntdbrestoreRusty Russell1-8/+28
Since our default hashsize is 8192 not 131, we look fat when we convert near-empty TDBs. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: reduce default hashsize on ntdbtorture.Rusty Russell1-3/+10
Just like tdbtorture, having a hashsize of 2 stresses us much more! Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: add NTDB_ATTRIBUTE_HASHSIZERusty Russell2-2/+41
Since we've given up on expansion, let them frob the hashsize again. We have attributes, so we should use them for optional stuff like this. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: remove hash table trees.Rusty Russell36-1662/+1096
TDB2 started with a top-level hash of 1024 entries, divided into 128 groups of 8 buckets. When a bucket filled, the 8 bucket group expanded into pointers into 8 new 64-entry hash tables. When these filled, they expanded in turn, etc. It's a nice idea to automatically expand the hash tables, but it doesn't pay off. Remove it for NTDB. 1) It only beats TDB performance when the database is huge and the TDB hashsize is small. We are about 20% slower on medium-size databases (1000 to 10000 records), worse on really small ones. 2) Since we're 64 bits, our hash tables are already twice as expensive as TDB. 3) Since our hash function is good, it means that all groups tend to fill at the same time, meaning the hash enlarges by a factor of 128 all at once, leading to a very large database at that point. 4) Our efficiency would improve if we enlarged the top level, but that makes our minimum db size even worse: it's already over 8k, and jumps to 1M after about 1000 entries! 5) Making the sub group size larger gives a shallower tree, which performs better, but makes the "hash explosion" problem worse. 6) The code is complicated, having to handle delete and reshuffling groups of hash buckets, and expansion of buckets. 7) We have to handle the case where all the records somehow end up with the same hash value, which requires special code to chain records for that case. On the other hand, it would be nice if we didn't degrade as badly as TDB does when the hash chains get long. This patch removes the hash-growing code, but instead of chaining like TDB does when a bucket fills, we point the bucket to an array of record pointers. Since each on-disk NTDB pointer contains some hash bits from the record (we steal the upper 8 bits of the offset), 99.5% of the time we don't need to load the record to determine if it matches. This makes an array of offsets much more cache-friendly than a linked list. Here are the times (in ns) for tdb_store of N records, tdb_store of N records the second time, and a fetch of all N records. I've also included the final database size and the smbtorture local.[n]tdb_speed results. Benchmark details: 1) Compiled with -O2. 2) assert() was disabled in TDB2 and NTDB. 3) The "optimize fetch" patch was applied to NTDB. 10 runs, using tmpfs (otherwise massive swapping as db hits ~30M, despite plenty of RAM). Insert Re-ins Fetch Size dbspeed (nsec) (nsec) (nsec) (Kb) (ops/sec) TDB (10000 hashsize): 100 records: 3882 3320 1609 53 203204 1000 records: 3651 3281 1571 115 218021 10000 records: 3404 3326 1595 880 202874 100000 records: 4317 3825 2097 8262 126811 1000000 records: 11568 11578 9320 77005 25046 TDB2 (1024 hashsize, expandable): 100 records: 3867 3329 1699 17 187100 1000 records: 4040 3249 1639 154 186255 10000 records: 4143 3300 1695 1226 185110 100000 records: 4481 3425 1800 17848 163483 1000000 records: 4055 3534 1878 106386 160774 NTDB (8192 hashsize) 100 records: 4259 3376 1692 82 190852 1000 records: 3640 3275 1566 130 195106 10000 records: 4337 3438 1614 773 188362 100000 records: 4750 5165 1746 9001 169197 1000000 records: 4897 5180 2341 83838 121901 Analysis: 1) TDB wins on small databases, beating TDB2 by ~15%, NTDB by ~10%. 2) TDB starts to lose when hash chains get 10 long (fetch 10% slower than TDB2/NTDB). 3) TDB does horribly when hash chains get 100 long (fetch 4x slower than NTDB, 5x slower than TDB2, insert about 2-3x slower). 4) TDB2 databases are 40% larger than TDB1. NTDB is about 15% larger than TDB1
2012-06-19ntdb: special accessor functions for read/write of an offset.Rusty Russell3-50/+114
We also split off the NTDB_CONVERT case (where the ntdb is of a different endian) into its own io function. NTDB speed: Adding 10000 records: 3894-9951(8553) ns (815528 bytes) Finding 10000 records: 1644-4294(3580) ns (815528 bytes) Missing 10000 records: 1497-4018(3303) ns (815528 bytes) Traversing 10000 records: 1585-4225(3505) ns (815528 bytes) Deleting 10000 records: 3088-8154(6927) ns (815528 bytes) Re-adding 10000 records: 3192-8308(7089) ns (815528 bytes) Appending 10000 records: 5187-13307(11365) ns (1274312 bytes) Churning 10000 records: 6772-17567(15078) ns (1274312 bytes) NTDB speed in transaction: Adding 10000 records: 1602-2404(2214) ns (815528 bytes) Finding 10000 records: 456-871(778) ns (815528 bytes) Missing 10000 records: 393-522(503) ns (815528 bytes) Traversing 10000 records: 729-1015(945) ns (815528 bytes) Deleting 10000 records: 1065-1476(1374) ns (815528 bytes) Re-adding 10000 records: 1397-1930(1819) ns (815528 bytes) Appending 10000 records: 2927-3351(3184) ns (1274312 bytes) Churning 10000 records: 3921-4697(4378) ns (1274312 bytes) smbtorture results: ntdb speed 86581-191518(175666) ops/sec Applying patch..increase-top-level.patch
2012-06-19ntdb: inline oob checkRusty Russell6-14/+24
The simple "is it in range" check can be inline; complex cases can be handed through to the normal or transaction handler. NTDB speed: Adding 10000 records: 4111-9983(9149) ns (815528 bytes) Finding 10000 records: 1667-4464(3810) ns (815528 bytes) Missing 10000 records: 1511-3992(3546) ns (815528 bytes) Traversing 10000 records: 1698-4254(3724) ns (815528 bytes) Deleting 10000 records: 3608-7998(7358) ns (815528 bytes) Re-adding 10000 records: 3259-8504(7805) ns (815528 bytes) Appending 10000 records: 5393-13579(12356) ns (1274312 bytes) Churning 10000 records: 6966-17813(16136) ns (1274312 bytes) NTDB speed in transaction: Adding 10000 records: 916-2230(2004) ns (815528 bytes) Finding 10000 records: 330-866(770) ns (815528 bytes) Missing 10000 records: 196-520(471) ns (815528 bytes) Traversing 10000 records: 356-879(800) ns (815528 bytes) Deleting 10000 records: 505-1267(1108) ns (815528 bytes) Re-adding 10000 records: 658-1681(1477) ns (815528 bytes) Appending 10000 records: 1088-2827(2498) ns (1274312 bytes) Churning 10000 records: 1636-4267(3785) ns (1274312 bytes) smbtorture results: ntdb speed 85588-189430(157110) ops/sec
2012-06-19ntdb: allocator attribute.Rusty Russell15-92/+311
This is designed to allow us to make ntdb_context (and NTDB_DATA returned from ntdb_fetch) a talloc pointer. But it can also be used for any other alternate allocator. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: still prepare recovery area with NTDB_NOSYNC.Rusty Russell1-10/+8
NTDB_NOSYNC now just prevents the fsync/msync calls, which speeds testing while still providing full coverage. It also provides safety against processes dying during transaction commit (though obviously, not against the machine dying). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: simply disallow NULL names.Rusty Russell3-10/+5
TDB allows this for internal databases, but it's a bad idea, since the name is useful for logging. They're a hassle to deal with, and we'd just end up putting "unnamed" in there, so let the user deal with it. If they don't, they get an informative core dump. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: reduce transaction pagesize from 64k to 16k.Rusty Russell1-1/+1
The performance numbers for transaction pagesize are indeterminate: larger pagesizes means a smaller transaction array, and a better chance of having a contiguous record (more efficient for ntdb_parse_record and some internal operations inside a transaction). On the other hand, large pagesize means more I/O even if we change a few bytes. But it also controls the multiple by which we will enlarge the file, and hence the minimum db size. It's 4k for tdb1, but 16k seems reasonable in these modern times. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: remove last block transactoin logic.Rusty Russell1-44/+1
Now our database is always a multiple of NTDB_PGSIZE, we can remove the special handling for the last block. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: create initial database to be multiple of NTDB_PGSIZE.Rusty Russell8-88/+138
As copied from tdb1, there is logic in the transaction code to handle a non-PGSIZE multiple db, but in fact this only happens for a completely unused database: as soon as we add anything to it, it is expanded to a NTDB_PGSIZE multiple. If we create the database with a free record which pads it out to NTDB_PGSIZE, we can remove this last-page-is-different logic. Of course, the fake ntdbs we create in our tests now also need to be multiples of NTDB_PGSIZE, so we change some numbers there too. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: make sure file is always a multiple of PAGESIZE (now NTDB_PGSIZE)Rusty Russell6-46/+73
ntdb uses tdb's transaction code, and it has an undocumented but implicit assumption: that the transaction recovery area is always aligned to the transaction pagesize. This means that no block will overlap the recovery area. This is maintained by rounding the size of the database up, so do the same for ntdb. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: fix recovery data write.Rusty Russell2-9/+36
We were missing the last few bytes. Found by 100 runs of ntdbtorture -t -k. The transaction test code didn't catch this, because usually those last few bytes are irrelevant to the actual contents of the database. We fix the test. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: enhance external-helper test code.Rusty Russell6-18/+36
Our external test helper is a bit primitive when it comes to doing STORE or FETCH commands: let us specify the data we expect, instead of assuming it's the same as the key. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: use NTDB_LOG_WARNING level for failed open() without O_CREAT.Rusty Russell2-1/+11
This is a fairly common pattern in Samba, and if we log an error on every open it spams the logs. On the other hand, other errors are potentially more serious, so we still use NTDB_LOG_ERROR on them. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ccan: remove bogus debug print.Rusty Russell1-1/+0
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: make fork test more thorough.Rusty Russell2-9/+29
We document that the child of a fork() can do a brunlock() if the parent does a brlock: we should not log an error when they do this. Also, test the case where we fork() and return inside a parse function (which is allowed). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: print \n at end of log messages in tests.Rusty Russell1-1/+1
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: reduce race between creating file and getting open lock.Rusty Russell1-23/+30
In tdb, we grab the open lock immediately after we open the file. In ntdb, we usually did some work first. tdbtorture managed to get in before the creator grabbed the lock: testing with 3 processes, 5000 loops, seed=1338246020 ntdb:torture.ntdb:IO Error:ntdb_open: torture.ntdb is not a ntdb file 29023:torture.ntdb:db open failed At cost of a little duplicated code, we can reduce the race. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: catch any valgrind errors in testRusty Russell1-2/+2
Make --valgrind and --valgrind-log options work! Amitay figured this out! Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: catch any valgrind errors in testRusty Russell1-1/+1
We need --error-exitcode=, otherwise valgrind errors don't cause the test to fail. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: remove ntdb_error()Rusty Russell14-190/+144
It was a hack to make compatibility easier. Since we're not doing that, it can go away: all callers must use the return value now. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19TDB2: Goodbye TDB2, Hello NTDB.Rusty Russell148-13728/+13586
This renames everything from tdb2 to ntdb: importantly, we no longer use the tdb_ namespace, so you can link against both ntdb and tdb if you want to. This also enables building of standalone ntdb by the autobuild script. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19tdb2: Fix typo in TDB1_porting.txtKirill Smelkov1-1/+1
Judging by code it's tdb1, where you needed to free old key's dptr manually. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19TDB2: more internal cleanups after TDB1 compatibility removal.Rusty Russell13-263/+239
This eliminates the separate tdb2 substructure, and makes some tdb1-required functions static. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19TDB2: remove TDB1 compatibility.Rusty Russell95-8164/+160
This rips out all the TDB1 compatibility from tdb2. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19TDB2: make SAMBA use tdb1 again for the moment.Rusty Russell17-535/+10
Otherwise the following surgery will break the SAMBA build and testsuite. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ccan: check for err.h ourselvesRusty Russell2-0/+3
Heimdal does this, but that doesn't help the autoconf build or the standalone libntdb build. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19WHATSNEW: Fix typo.Jelmer Vernooij1-1/+1
"dcerpc endpoint services" -> "dcerpc endpoint servers" Autobuild-User(master): Jelmer Vernooij <jelmer@samba.org> Autobuild-Date(master): Tue Jun 19 04:40:12 CEST 2012 on sn-devel-104
2012-06-19tdb/wscript: Remove unecessary semicolons.Jelmer Vernooij1-4/+4
2012-06-19wafsamba/irixcc: add '-c99' option to ccStefan Metzmacher1-1/+3
Lets see if this fixes the build on IRIX. metze Autobuild-User(master): Stefan Metzmacher <metze@samba.org> Autobuild-Date(master): Tue Jun 19 02:42:21 CEST 2012 on sn-devel-104
2012-06-18Revert "s3: temporary hack to make the waf build work withouth autotools ↵Björn Jacke1-1/+0
being required" This reverts commit f1becfa27b6b4e35541e6df0cafdec0ad47d2e3f. The hack was actually only required due to a configuration issue in our buildfarm scripts. Autobuild-User(master): Björn Jacke <bj@sernet.de> Autobuild-Date(master): Mon Jun 18 20:07:08 CEST 2012 on sn-devel-104
2012-06-18selftest/flapping: samba4.nss.test is also flakey for s3memberStefan Metzmacher1-1/+1
[1426/1518 in 1h24m58s] samba4.nss.test using winbind(s3member) UNEXPECTED(failure): samba4.nss.test using winbind(s3member).run nsstest(s3member) REASON: _StringException: _StringException: ERROR setpwent: NSS_STATUS=-1 1 (nss_errno=0) ERROR getpwent: NSS_STATUS=-1 1 (nss_errno=0) ERROR endpwent: NSS_STATUS=-1 1 (nss_errno=0) ERROR setgrent: NSS_STATUS=-1 1 (nss_errno=0) ERROR getgrent: NSS_STATUS=-1 1 (nss_errno=0) ERROR endgrent: NSS_STATUS=-1 1 (nss_errno=0) ERROR Non existent user gave error -1 ERROR Non existent uid gave error -1 ERROR Non existent group gave error -1 ERROR Non existent gid gave error -1 total_errors=10 metze Autobuild-User(master): Stefan Metzmacher <metze@samba.org> Autobuild-Date(master): Mon Jun 18 17:59:25 CEST 2012 on sn-devel-104
2012-06-18s3:autoconf: add -Iautoconf -Iautoconf/source3 at configure stageStefan Metzmacher2-3/+2
There're some configure tests which require this. metze
2012-06-18s3:Makefile.in: remove pidl generated files with 'make realdistclean'Stefan Metzmacher1-0/+1
metze
2012-06-18s3:Makefile.in: fix 'make realdistclean' after moving generated files to ↵Stefan Metzmacher1-1/+1
autoconf/ metze
2012-06-18s3:Makefile.in: fix 'make clean' after moving generated files to autoconf/Stefan Metzmacher1-6/+5
metze
2012-06-18s3:autogen.sh: fix autoconf/lib/param/param_proto.h locationStefan Metzmacher1-1/+1
metze
2012-06-18lib/param: add missing prototype of lpcfg_parm_long()Stefan Metzmacher1-0/+3
metze
2012-06-18s3:autoconf-build: build the idmap backends tdb2, rid, and hash by default ↵Michael Adam1-0/+3
(shared) Autobuild-User(master): Michael Adam <obnox@samba.org> Autobuild-Date(master): Mon Jun 18 13:38:50 CEST 2012 on sn-devel-104
2012-06-18s3:waf-build: build the idmap backends tdb2, rid, and hash by default (shared)Michael Adam1-1/+2
2012-06-18s3:idmap_tdb: fix miss in rename of dbwrap_trans_store_uint32() to ↵Michael Adam1-4/+4
dbwrap_trans_store_uint32_bystring()
2012-06-18dbwrap: Rename dbwrap_fetch_uint32->dbwrap_fetch_uint32_bystringAmitay Isaacs1-2/+2
Signed-off-by: Michael Adam <obnox@samba.org>
2012-06-18s3:configure: check for SPLICE_F_MOVE at configure stageStefan Metzmacher2-2/+2
This should fix the waf build on AIX, which has a splice symbol. metze Autobuild-User(master): Stefan Metzmacher <metze@samba.org> Autobuild-Date(master): Mon Jun 18 11:43:01 CEST 2012 on sn-devel-104
2012-06-17heimdal:lib/wind: include <stdlib.h> at the endStefan Metzmacher3-3/+3
This makes sure config.h gets includes first. This should fix the build on AIX. metze Autobuild-User(master): Stefan Metzmacher <metze@samba.org> Autobuild-Date(master): Sun Jun 17 16:16:24 CEST 2012 on sn-devel-104