Age | Commit message (Collapse) | Author | Files | Lines |
|
This adds the known failure for the one test (netbios browsing) that
fails.
Andrew Bartlett
|
|
Because we now always build the source3 code, we can link directly
against a private libnetapi and libsmbclient to test the behaviour of
these important APIs.
We use a private libnetapi_net_init(), and by using this interface
rather than the public one, we can ensure that the correct smb.conf is
loaded (as smbtorture4 is a Samba4 semantics binary).
The #include of the source3 includes.h is required to do the manual
lp_load().
Andrew Bartlett
|
|
The issue here is that the source3 components now built as part of the
top level build do not have their depenencies fully specified, and
this causes the build to fail for many of our users.
When we fix that, we can restore this flag, so we again find that kind
of bug, which will show up for our Gentoo users regardless.
Andrew Bartlett
|
|
These same names are use in the source3 popt code, which is called from
in libsmbclient and libnet. These are then included in the smbtorture
binary for testing
Andrew Bartlett
|
|
All of this code is now in common, so we don't need the second
'-common' library any more!
Andrew Bartlett
|
|
|
|
This removes the lang_tdb based varient, the only user of the lang_tdb
code is SWAT, which calls that directly.
'net' and 'pam_winbind' are internationalised using gettext.
Andrew Bartlett
|
|
This global replace allows an easier comparison between the source3
and source4 loadparm systems.
Andrew Bartlett
|
|
|
|
|
|
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Mon Jun 20 23:28:43 CEST 2011 on sn-devel-104
|
|
Autobuild-User: Michael Adam <obnox@samba.org>
Autobuild-Date: Mon Jun 20 14:56:29 CEST 2011 on sn-devel-104
|
|
the success case
|
|
rangesize"
|
|
autorid can only be used as a backend for the default idmap configuration.
|
|
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Mon Jun 20 13:45:21 CEST 2011 on sn-devel-104
|
|
This fixes a few Coverity errors
|
|
|
|
This is a replacement for tevent_req_nomem(NULL, req)
|
|
I don't think this kind of hack belongs in the tdb2 source, but SAMBA uses
it to speed testing, so we should respect it: handle it in our compat
open wrapper.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Mon Jun 20 12:32:08 CEST 2011 on sn-devel-104
|
|
This is simplistic. We need to support making TDB2 a standalone library,
but for now, we simply built it in-tree.
Once we have tdb1 compatibility in tdb2, we can rename this option to
--enable-tdb2.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Soon, TDB2 will handle tdb1 files, but until then, we substitute.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
TDB2 doesn't have (the racy) signal pointer; the new method is to
override the locking callbacks and do the timeout internally.
The technique here is to invalidate the struct flock when the timeout
occurs, so it works even if it happens before we enter the fcntl() call.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
This is a bit messy, but it works. Kept as a separate patch so it's
easier to merge back and forth with CCAN's tdb2.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
My previous patches fixed up all direct TDB callers, but there are a
few utility functions and the db_context functions which are still
using the old -1 / 0 return codes.
It's clearer to fix up all the callers of these too, so everywhere is
consistent: non-zero means an error.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
This is a helper for the common case of opening a tdb with a logging
function, but it doesn't do all the work, since TDB1 and TDB2's log
functions are different types.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Fixup callers to tdb_parse_record() to be compatible with tdb2.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
TDB has no idea of endian itself, but it knows whether the TDB is the
same endian as the current machine, so we should use that rather than
implementing TDB_BIGENDIAN in tdb2.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
We don't expose freelist or hash size for TDB2.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
These don't exist in tdb2. The former is used in one weird place in
tdb1, and the latter not at all.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
The typedef is TDB2 compatible, the struct isn't.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Since TDB2 functions return the error directly, tdb_errorstr() taken an
error code, not the tdb as it does in TDB1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Note that tdb_nextkey_compat frees the old key for us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
TDB2 returns void here. tdb_unlockall will *always* return with the
database unlocked, but it will complain via the log function if it wasn't
locked.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
TDB2 returns a negative error number on failure. This is compatible
if we always check for < 0 instead of == -1.
Also, there's no tdb_traverse_read in TDB2: we don't try to make
traverse reliable any more, so there are no write locks anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
TDB2 returns void here. tdb_chainunlock will *always* return with the
chain unlocked, but it will complain via the log function if it wasn't
locked.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
TDB2 returns a negative error number on failure. This is compatible
if we always check for != 0 instead of == -1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
TDB2 returns void here. tdb_transaction_cancel will *always* return
with the transaction cancelled, but it will complain via the log
function if a transaction wasn't in progress.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
TDB2 returns a negative error number on failure. This is compatible
if we always check for != 0 instead of == -1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
TDB2 returns a negative error number on failure. This is compatible
if we always check for != 0 instead of == -1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
TDB2 returns a negative error number on failure. This is compatible
if we always check for != 0 instead of == -1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
This is a noop for tdb1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
We change all the headers and wscript files to use tdb_compat; this
means we have one place to decide whether to use TDB1 or TDB2.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
TDB2's API is slightly different from TDB1. In particular, all functions
return 0 (TDB_SUCCESS) or a negative error number, rather than -1 or tdb_null
and storing the error in tdb_error() (though TDB2 does that as well).
The simplest fix is to replace all the different functions with a wrapper,
and that is done here.
Compatibility functions:
tdb_null: not used as an error return, so not defined by tdb2.
tdb_fetch_compat: TDB1-style data-returning tdb_fetch.
tdb_firstkey_compat: TDB1-style data-returning tdb_firstkey
tdb_nextkey_compat: TDB1-style data-returning tdb_nextkey, with
TDB2-style free of old key.
tdb_errorstr_compat: TDB1-style tdb_errorstr() which takes TDB instead of ecode.
TDB_CONTEXT: TDB1-style typedef for struct tdb_context.
tdb_open_compat: Simplified open routine which takes log function, sets
TDB_ALLOW_NESTING as Samba expects, and adds TDB_CLEAR_IF_FIRST support.
Things defined away in TDB2 wrappers:
tdb_traverse_read: TDB2's tdb_traverse only uses read-locks anyway.
tdb_reopen/tdb_reopen_all: TDB2 detects this error itself.
TDB_INCOMPATIBLE_HASH: TDB2 uses the Jenkins hash already.
TDB_VOLATILE: TDB2 shouldn't have freelist scaling issues.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Rather than tdb's internal one.
|
|
Rather than tdb's internal one.
|
|
It's a nice hash, but this usage has nothing to do with TDB. So use the
Jenkins hash directly from CCAN instead (it's the same one).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Imported from git://git.ozlabs.org/~ccan/ccan init-1161-g661d41f
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|