summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-09-15s3:libsmb: pass max_protocol to cli_negprot()Stefan Metzmacher13-26/+22
metze
2011-09-15s3:libsmb: add basic max_protocol support in cli_negprot()Stefan Metzmacher1-7/+15
metze
2011-09-15s3:libsmb: use local variables in cli_state_create()Stefan Metzmacher3-21/+14
We don't need to keep use_spnego, use_level_II_oplocks, force_dos_errors and force_ascii within struct cli_state. metze Autobuild-User: Stefan Metzmacher <metze@samba.org> Autobuild-Date: Thu Sep 15 10:12:17 CEST 2011 on sn-devel-104
2011-09-15s3:libsmb: use CAP_EXTENDED_SECURITY instead of cli->use_spnegoStefan Metzmacher1-1/+1
cli->capabilities contains the negotiated capabilities. metze
2011-09-15s3:libsmb: make use of SMB_CAP_BOTH/CLIENT_MASK in ↵Stefan Metzmacher1-13/+25
cli_session_setup_capabilities() This matches a w2k3 client. metze
2011-09-15s3:libsmb: calculate the negotiated SMB1 capabilities in cli_negprot_done()Stefan Metzmacher1-6/+12
We calculate the negotiated capabilities based on the mask for: - client only flags - flags used in both directions - server only flags metze
2011-09-15s3:include: add some masks for SMB1 CAP_* flagsStefan Metzmacher1-0/+25
The flags are devided into 3 sections: - client only flags - flags used in both directions - server only flags metze
2011-09-15s3:libsmb: calculate all SMB1 capabilities we want to support for the connectionStefan Metzmacher1-2/+24
We should do this at startup in cli_state_create() and later calculate the negotiated capabilities in cli_negprot_done(). metze
2011-09-15s3:libsmb: no need to reset capabilities in cli_session_setup_lanman2()Stefan Metzmacher1-10/+0
This is only used cli->protocol < PROTOCOL_NT1, in which case cli_negprot_done() has already reset cli->capabilities. metze
2011-09-15s3:libsmb: make sure we always set cli->capabilities at the end of ↵Stefan Metzmacher1-3/+6
cli_negprot_done() If the server doesn't support PROTOCOL_NT1 we should reset the negotiated capabilities to 0. metze
2011-09-15Add a missing include file to two VFS modulesRichard Sharpe2-0/+2
Signed-off-by: Jeremy Allison <jra@samba.org> Autobuild-User: Jeremy Allison <jra@samba.org> Autobuild-Date: Thu Sep 15 02:56:36 CEST 2011 on sn-devel-104
2011-09-15Finish commit 8745c70d by Michael Adam.Jeremy Allison2-9/+9
If you're going to move winbindd_cache.tdb to the state_path, do it *everywhere*. Found by Ira Cooper <ira@wakeful.net>. Autobuild-User: Jeremy Allison <jra@samba.org> Autobuild-Date: Thu Sep 15 00:43:04 CEST 2011 on sn-devel-104
2011-09-14s3:libsmb: remove unused cli->is_sambaStefan Metzmacher3-31/+1
s3:libsmb: remove unused cli->is_samba metze Signed-off-by: Jeremy Allison <jra@samba.org>
2011-09-14s3:libsmb: align chunk_size for cli_pull/push() to a page size of 1024 bytesStefan Metzmacher1-0/+8
s3:libsmb: align chunk_size for cli_pull/push() to a page size of 1024 bytes metze Signed-off-by: Jeremy Allison <jra@samba.org>
2011-09-14s3:client.h: remove unused definesStefan Metzmacher1-9/+0
s3:client.h: remove unused defines metze Signed-off-by: Jeremy Allison <jra@samba.org>
2011-09-14s3:libsmb: let cli_write_max_bufsize() return the max number of possible bytesStefan Metzmacher1-21/+28
s3:libsmb: let cli_write_max_bufsize() return the max number of possible bytes We now return what's possible on the wire. Which is 0x1FFFF - data_offset if CAP_LARGE_WRITEX is given by the server (without signing) or 0xFFFFFF - data_offset if CIFS_UNIX_LARGE_READ_CAP is available (without signing/sealing). Otherwise we return max_xmit - data_offset. metze Signed-off-by: Jeremy Allison <jra@samba.org>
2011-09-14s3:libsmb: let cli_read_max_bufsize() return the max number of possible bytesStefan Metzmacher1-16/+31
s3:libsmb: let cli_read_max_bufsize() return the max number of possible bytes We now return what's possible on the wire. Which is 0xFFFF if CAP_LARGE_READX is given by the server or 0xFFFFFF - data_offset if CIFS_UNIX_LARGE_READ_CAP is available (without signing/sealing). Otherwise we return max_xmit - data_offset. metze Signed-off-by: Jeremy Allison <jra@samba.org>
2011-09-14s3:smbd: SMB ReadX with size > 0xffff should only possible for samba clients.Stefan Metzmacher1-1/+10
Windows 2008 R2 (and others) ignore the high bits for the read size. Unless we're using the unix extentions and the client uses CIFS_UNIX_LARGE_READ_CAP, we should also ignore the high bits. But we still need to support old "smbclient" binaries and have to check if the client is "Samba". metze Signed-off-by: Jeremy Allison <jra@samba.org>
2011-09-14s3:smbd: remember the client unix capabilities on the connectionStefan Metzmacher2-43/+44
metze Signed-off-by: Jeremy Allison <jra@samba.org>
2011-09-14Fix bug #8453 - smbclient segfaults when dialect option -m is used for ↵Jeremy Allison1-0/+13
legacy dialects Ensure we have valid pointers.
2011-09-14libcli/auth: add some const to SMBNTencrypt_hash() and SMBNTencrypt()Stefan Metzmacher2-4/+4
metze Autobuild-User: Stefan Metzmacher <metze@samba.org> Autobuild-Date: Wed Sep 14 19:49:24 CEST 2011 on sn-devel-104
2011-09-14s4:wrepl_server: return NT_STATUS_CONNECTION_DISCONNECTEDStefan Metzmacher1-1/+1
We should return the same in all places. metze
2011-09-14s4:libcli/wrepl: return NT_STATUS_CONNECTION_DISCONNECTEDStefan Metzmacher1-3/+3
We should return the same in all places. metze
2011-09-14s4:lib/messaging: let irpc handles return NT_STATUS_CONNECTION_DISCONNECTEDStefan Metzmacher1-2/+2
We should return the same in all places. metze
2011-09-14s4:librpc/rpc: return NT_STATUS_CONNECTION_DISCONNECTEDStefan Metzmacher1-2/+2
We should return the same in all places. metze
2011-09-14s3:winbindd: let wbint handles return NT_STATUS_CONNECTION_DISCONNECTEDStefan Metzmacher1-2/+2
We should return the same in all places. metze
2011-09-14s3:rpc_server: let rpcint handles return NT_STATUS_CONNECTION_DISCONNECTEDStefan Metzmacher1-2/+2
We should return the same in all places. metze
2011-09-14s3:rpc_client: return NT_STATUS_CONNECTION_DISCONNECTEDStefan Metzmacher2-5/+5
We should return the same in all places and don't mix NT_STATUS_INVALID_CONNECTION and NT_STATUS_CONNECTION_INVALID. metze
2011-09-14s3:libsmb: return NT_STATUS_CONNECTION_DISCONNECTED instead of ↵Stefan Metzmacher1-1/+1
NT_STATUS_CONNECTION_INVALID We should return the same in all places. metze
2011-09-14s3:torture/run_oplock4: don't set cli->use_level_II_oplocksStefan Metzmacher1-3/+0
Doing this after the session setup is pointless, as that's the only place where we tell the server we support level II oplocks. metze Autobuild-User: Stefan Metzmacher <metze@samba.org> Autobuild-Date: Wed Sep 14 17:23:46 CEST 2011 on sn-devel-104
2011-09-14s3:smb2_server: SMB2_OP_GETINFO doesn't require at least 1 dyn byteStefan Metzmacher1-1/+13
metze
2011-09-14s3-libnet: add missing newlines in debug statement.Günther Deschner1-2/+2
Guenther Autobuild-User: Günther Deschner <gd@samba.org> Autobuild-Date: Wed Sep 14 15:52:10 CEST 2011 on sn-devel-104
2011-09-14s3:smbd: make use of better SMB signing negotiationStefan Metzmacher4-4/+31
metze Autobuild-User: Stefan Metzmacher <metze@samba.org> Autobuild-Date: Wed Sep 14 09:41:02 CEST 2011 on sn-devel-104
2011-09-14s3:libsmb: make use of new advanded SMB signingStefan Metzmacher4-57/+64
metze
2011-09-14s3:smb_signing: add support for easier negotiation of SMB signingStefan Metzmacher5-37/+83
We don't make use of it yet, but it will follow. metze
2011-09-14s3:smbd: echo FLAGS2_SMB_SECURITY_SIGNATURES* and the signature field in the ↵Stefan Metzmacher1-3/+9
reply This matches what windows is doing. metze
2011-09-14tdb2: remove bogus leftover .orig file.Rusty Russell1-618/+0
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Autobuild-User: Rusty Russell <rusty@rustcorp.com.au> Autobuild-Date: Wed Sep 14 06:06:41 CEST 2011 on sn-devel-104
2011-09-14Fix bug #8229 - git patch attached against 3.6.0-rc2 to fix 'widelinks' ↵Jeremy Allison5-1/+67
regression intro'd in 3.2 Add "allow insecure widelinks" to re-enable the ability (requested by some sites) to have "widelinks = yes" and "unix extensions = yes". Based on an original patch by Linda Walsh <samba@tlinx.org> Autobuild-User: Jeremy Allison <jra@samba.org> Autobuild-Date: Wed Sep 14 03:55:45 CEST 2011 on sn-devel-104
2011-09-14tdb_compat: change offset of CLEAR_IF_FIRST lock.Rusty Russell1-2/+2
This makes it match tdb1, which mean it will Just Work as TDB2 gets tdb1 format support. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Autobuild-User: Rusty Russell <rusty@rustcorp.com.au> Autobuild-Date: Wed Sep 14 02:21:29 CEST 2011 on sn-devel-104
2011-09-14tdb_compat: support tdb_reopen/tdb_reopen_all for TDB2Rusty Russell2-3/+49
This matters with the clear-if-first support: we need to re-establish those locks at this point. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-09-14util_tdb: return -1/0 from lock_with_timeout functions.Rusty Russell1-2/+2
Keeps the tdb2 API change (which returns error codes, rather than -1) localized. The function returns -1 down the other path, so make it consistent. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-09-14dbwrap_tdb: handle tdb2 return values properly.Rusty Russell1-4/+4
TDB2 versions of tdb_parse_record etc return an error code, not -1. Turn those into -1/0 in dbwrap_tdb to insulate the rest of the code from that change. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-09-14tdb2: fix prototypes which return enum TDB_ERROR.Rusty Russell2-10/+10
Since enums and ints are compatible in C, the compiler didn't warn that our prototypes for these functions disagreed with the definitions. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (Imported from CCAN commit 6d3832ee613adeb9ae7ed6454996ffa39c32650f)
2011-09-14tdb2: fix return handling in pytdb wrapper.Rusty Russell1-8/+10
tdb_close() does genuinely return non-zero, not an error code, even in tdb2. And tdb_exists() returns true or false, not an error code. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-09-14tdb2: add error conversion functions.Rusty Russell12-91/+97
This clarifies the code a little, but also provides a more explicit mechanism which can be used to debug error handling (by introducing tdb_err_t and making it a pointer type). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (Imported from CCAN commit afa6d57b7d93fe4675a952f556eb462951baa257)
2011-09-14tdb2: set tdb_error() on tdb_transaction_prepare_commit.Rusty Russell1-1/+1
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (Imported from CCAN commit feb36b14278b4230af70dab90369a345b6a027ef)
2011-09-14tdb2: make tests work in parallel.Rusty Russell6-6/+6
Lazy cut & paste of tdb names causes failure when we run in parallel. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (Imported from CCAN commit 380372e733416c2b348d5307f536d0a0807e95df)
2011-09-14tdb2: fix error handling for tdb1_transaction_commit.Rusty Russell1-1/+2
tdb_repack() returns an enum TDB_ERROR, whereas tdb1_transaction_commit is expected to return 0 or -1. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (Imported from CCAN commit b679512e4260b9847e2f846b07443e6907d8276f)
2011-09-14tdb2: don't return -1 (ie. TDB_ERR_CORRUPT) on transaction write fail.Rusty Russell1-1/+1
A left-over -1 return; should be returning ecode (probably TDB_ERR_IO). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (Imported from CCAN commit 077bdae6877d26749987b26a1b5b28cdba5ebbdd)
2011-09-14tdb2: enhance tdb1 porting document.Rusty Russell1-0/+28
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (Imported from CCAN commit 9cbae0f976118472f0065eee674eacf6ab4b80c5)