Age | Commit message (Collapse) | Author | Files | Lines |
|
Because fcntl locks don't nest, we track them in the tdb->lockrecs array
and only place/release them when the count goes to 1/0. We only do this
for record locks, so we simply place the list number (or -1 for the free
list) in the structure.
To generalize this:
1) Put the offset rather than list number in struct tdb_lock_type.
2) Rename _tdb_lock() to tdb_nest_lock, make it non-static and move the
allrecord check out to the callers (except the mark case which doesn't
care).
3) Rename _tdb_unlock() to tdb_nest_unlock(), make it non-static and
move the allrecord out to the callers (except mark again).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
The word global is overloaded in tdb. The global_lock inside struct
tdb_context is used to indicate we hold a lock across all the chains.
Rename it to allrecord_lock.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
The word global is overloaded in tdb. The GLOBAL_LOCK offset is used at
open time to serialize initialization (and by the transaction code to block
open).
Rename it to OPEN_LOCK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Now tdb_open() calls tdb_transaction_cancel() instead of
_tdb_transaction_cancel, we can make it static.
Signed-off-by: Rusty Russell<rusty@rustcorp.com.au>
|
|
This is taken from the CCAN code base: rather than using tdb_brlock for
locking and unlocking, we split it into brlock and brunlock functions.
For extra debugging information, brunlock says what kind of lock it is
unlocking (even though fnctl locks don't need this). This requires an
extra argument to tdb_transaction_unlock() so we know whether the
lock was upgraded to a write lock or not.
We also use a "flags" argument tdb_brlock:
1) TDB_LOCK_NOWAIT replaces lck_type = F_SETLK (vs F_SETLKW).
2) TDB_LOCK_MARK_ONLY replaces setting TDB_MARK_LOCK bit in ltype.
3) TDB_LOCK_PROBE replaces the "probe" argument.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Signed-off-by: Matthias Dieter Wallnöfer <mwallnoefer@yahoo.de>
|
|
This might help on some filesystems
|
|
|
|
If a process (or the machine) dies after just after writing the
recovery head (pointing at the end of file), the recovery record will filled
with 0x42. This will not invoke a recovery on open, since rec.magic
!= TDB_RECOVERY_MAGIC.
Unfortunately, the first transaction commit will happily reuse that
area: tdb_recovery_allocate() doesn't check the magic. The recovery
record has length 0x42424242, and it writes that back into the
now-valid-looking transaction header) for the next comer (which
happens to be tdb_wipe_all in my tests).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
This should make it easier to keep all release scripts alined as it will reduce
the difference between them to ideally a few variables
Also moves the tdb script in the scripts directory.
|
|
after recent fixes we need to raise the version to 1.2.1 so that
we can require also the right patched version.
|
|
There was a bug in tdb where the
tdb_brlock(tdb, GLOBAL_LOCK, F_UNLCK, F_SETLKW, 0, 1);
(ending the transaction-"mutex") was done before the
/* remove the recovery marker */
This means that when a transaction is committed there is a window where another
opener of the file sees the transaction marker while the transaction committer
is still fully functional and working on it. This led to transaction being
rolled back by that second opener of the file while transaction_commit() gave
no error to the caller.
This patch moves the F_UNLCK to after the recovery marker was removed, closing
this window.
|
|
metze
|
|
https://bugzilla.samba.org/show_bug.cgi?id=6991 for details
Signed-off-by: Stefan Metzmacher <metze@samba.org>
|
|
|
|
|
|
Guenther
|
|
|
|
Signed-off-by: Stefan Metzmacher <metze@samba.org>
|
|
metze
|
|
We need to keep TDB_ALLOW_NESTING as default behavior,
so that existing code continues to work.
However we may change the default together with a major version
number change in future.
metze
|
|
Make the default be that transaction is not allowed and any attempt to create a nested transaction will fail with TDB_ERR_NESTING.
If an application can cope with transaction nesting and the implicit
semantics of tdb_transaction_commit(), it can enable transaction nesting
by using the TDB_ALLOW_NESTING flag.
(cherry picked from ctdb commit 3e49e41c21eb8c53084aa8cc7fd3557bdd8eb7b6)
Signed-off-by: Stefan Metzmacher <metze@samba.org>
|
|
metze
|
|
|
|
While studying tdb, I've noticed a couple of mismatches between readme
and actual code:
- tdb_open_ex changed it's log_fn argument to log_ctx
- there is now no tdb_update(), which it seems was transformed into
non-exported tdb_update_hash()
There were other mismatches, but I don't remember them now, sorry.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
The reason I do it is that when using older python-tdb as shipped in
Debian Lenny, python interpreter crashes on this test:
(gdb) bt
#0 0xb7f8c424 in __kernel_vsyscall ()
#1 0xb7df5640 in raise () from /lib/i686/cmov/libc.so.6
#2 0xb7df7018 in abort () from /lib/i686/cmov/libc.so.6
#3 0xb7e3234d in __libc_message () from /lib/i686/cmov/libc.so.6
#4 0xb7e38624 in malloc_printerr () from /lib/i686/cmov/libc.so.6
#5 0xb7e3a826 in free () from /lib/i686/cmov/libc.so.6
#6 0xb7b39c84 in tdb_close () from /usr/lib/libtdb.so.1
#7 0xb7b43e14 in ?? () from /var/lib/python-support/python2.5/_tdb.so
#8 0x0a038d08 in ?? ()
#9 0x00000000 in ?? ()
master's pytdb does not (we have a check for self->closed in obj_close()),
but still...
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
So that erroneous double tdb_close() calls do not try to close() same
fd again. This is like SAFE_FREE() but for fd.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
It's Tdb.get(), not Tdb.fetch().
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
We no longer use swig for pytdb, so there is no need for swig make
rules. Also pytdb.c header should be updated.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
This can help with ldb where we rewrite the index records
|
|
metze
|
|
Also, set logging function so we get more informative messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
ctdb wants a quick way to detect corrupt tdbs; particularly, tdbs with
loops in their hash chains. tdb_check() provides this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
This means you can kill it at any time and expect no corruption.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
It was a regrettable hack which I used to reduce line count in tdb; in fact it caused confusion as can be seen in this patch.
In particular, ecode now needs to be set before TDB_LOG anyway, and having it exposed in
the header is useless (the struct tdb_context isn't defined, so it's doubly useless).
Also, we should never set errno, as io.c was doing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
When TDB_TRACE is defined (in tdb_private.h), verbose tracing of tdb operations is enabled.
This can be replayed using "replay_trace" from http://ccan.ozlabs.org/info/tdb.
The majority of this patch comes from moving internal functions to _<funcname> to
avoid double-tracing. There should be no additional overhead for the normal (!TDB_TRACE)
case.
Note that the verbose traces compress really well with rzip.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
There was a race condition that caused the torture.tdb to be left in a
state that needed recovery. The torture code thought that any message
from the tdb code was an error, so the "recovered" message, which is a
TDB_DEBUG_TRACE message, marked the run as being an error when it
isn't.
|
|
Michael
|
|
So one can perform tdbtool operations protected by transactions.
Michael
|
|
Michael
|
|
we depend on reads in transactions for s4 replication
|
|
We previously only allowed a commit to happen after a prepare
commit. It is in fact safe to allow reads between a prepare and a
commit, and the s4 replication code can make use of that, so allow it.
|
|
Michael
|
|
Michael
|
|
parentheses
Michael
|
|
by first concatenating multilint parentheses and removing typefes afterwards.
Michael
|
|
Michael
|
|
Michael
|
|
Michael
|