summaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)AuthorFilesLines
2011-10-18lib/param: Remove parameters for wins and spoolss databasesAndrew Bartlett1-30/+0
This removes the smb.conf parameters per-database, replacing these with hard-coded database names in well known (and configurable) directories. The wins.ldb is now always in the "state dir", rather than being in both state and lock dir (ie, a bug). Less smb.conf parameters means less parameters to try and sync up between the loadparm subsystems. Andrew Bartlett Autobuild-User: Andrew Bartlett <abartlet@samba.org> Autobuild-Date: Tue Oct 18 05:39:54 CEST 2011 on sn-devel-104
2011-10-18ldb: Output more error information when a connect failsAndrew Bartlett2-1/+6
2011-10-18credentials: Prioritise command-line specified options above defaults from ↵Andrew Bartlett2-0/+22
smb.conf If a user specified -W or --realm on the command line, then this is of level SPECIFIED, not UNINITIALISED, despite it going via the loadparm system. This helps us to ensure that -W server -Ulocaluser is parsed the same as -Userver\localuser. This matters as otherwise we might instead attempt to use kerberos to the realm from the smb.conf. Andrew Bartlett
2011-10-18ldb: fixed a race in ldb initialisationAndrew Tridgell1-1/+9
This fixes a race when two processes initialise the same ldb database at the same time. One of them could fail due to the other creating the @BASEINFO record first. Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org> Autobuild-User: Andrew Tridgell <tridge@samba.org> Autobuild-Date: Tue Oct 18 03:54:42 CEST 2011 on sn-devel-104
2011-10-14Fix const warnings.Jeremy Allison1-4/+4
2011-10-14Fix const warnings.Jeremy Allison1-3/+3
2011-10-14Fix bug with Samba not recognising an 6to4 IPv6 interface.Matthieu Patou1-0/+13
"The 6to4 interface has the flags IFF_POINTTOPOINT interface but no ifa_dstaddr as it's not at the IPv6 level a point to point interface (at least from my understanding), as we don't have a IFF_BROADCAST flag set (I have the impression that this flag is only set on a interface that has also an IPv4 address) the first test is not valid also, which result in a skipped interface."
2011-10-14libreplace: add a missing "eval" to the AC_VERIFY_C_PROTOTYPE macroMichael Adam1-1/+1
Without this eval, upon test success the corresponding actions (like defining corresponding variables) are not taken. Found by Timur I. Bakeyev, and based on his patch for 3.5.
2011-10-13Update to newer version of subunit.Jelmer Vernooij3-1/+10
Autobuild-User: Jelmer Vernooij <jelmer@samba.org> Autobuild-Date: Thu Oct 13 20:37:18 CEST 2011 on sn-devel-104
2011-10-13lib/param reduce the cost of loadparm_init_s3()Andrew Bartlett1-1/+1
The parameter redirection covers most things now, so this should be safe. Andrew Bartlett
2011-10-13lib/util: Add back control of mmap and hash size in tdb for top level buildAndrew Bartlett3-15/+13
This passes down a struct loadparm_context to allow these parameters to be checked. This may be s3 or s4 context, allowing the #if _SAMBA_BUILD_ macro to go away safely. Andrew Bartlett
2011-10-13lib/param Print error when mkdir of lock path failsAndrew Bartlett1-1/+3
This matches the s3 code for lock_path(). Andrew Bartlett
2011-10-13lib/param Add 'use mmap' parameter to control tdb use of mmapAndrew Bartlett1-0/+12
2011-10-13config.h: define HAVE_LIBREPLACERusty Russell2-0/+3
tdb2 wants to know if it should use replace.h. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Autobuild-User: Rusty Russell <rusty@rustcorp.com.au> Autobuild-Date: Thu Oct 13 08:58:35 CEST 2011 on sn-devel-104
2011-10-12s3:utils change data_blob_dup_talloc() to take a DATA_BLOB by valueGregor Beck1-1/+1
Signed-off-by: Michael Adam <obnox@samba.org>
2011-10-11s4/param: Expose lpcfg_smb_ports and lpcfg_socket_options, which are both ↵Jelmer Vernooij1-0/+1
required by winexe.
2011-10-11param: Expose lpcfg_smb_ports, required by winexe.Jelmer Vernooij1-0/+1
2011-10-11lib/param: fix typo _SAMBA_BUILD => _SAMBA_BUILD_ causing segfaultsStefan Metzmacher1-1/+1
If lpcfg_dns_update_command() returns NULL 'samba' segfaults on startup. metze Autobuild-User: Stefan Metzmacher <metze@samba.org> Autobuild-Date: Tue Oct 11 17:25:19 CEST 2011 on sn-devel-104
2011-10-11ldb:ldb_autotransaction_request - error string shouldn't be set hereMatthias Dieter Wallnöfer1-5/+0
A generic error string should be set independently of the access mechanism to an LDB operation. Hence it should be handled in "ldb_wait" and "ldb_request" Signed-off-by: Andrew Tridgell <tridge@samba.org> Autobuild-User: Andrew Tridgell <tridge@samba.org> Autobuild-Date: Tue Oct 11 10:15:18 CEST 2011 on sn-devel-104
2011-10-11ldb:pyldb.c - py_ldb_* modification calls - error string shouldn't be set hereMatthias Dieter Wallnöfer1-17/+1
As discussed with Jelmer, we shouldn't be setting a generic LDB error string only for the Python bindings alone. This should be done in "ldb_request" and "ldb_wait" - the common place for all possible LDB access mechanisms. Signed-off-by: Andrew Tridgell <tridge@samba.org>
2011-10-11ldb:ldb.c/"ldb_wait" - make "ldb_wait" always return an error stringMatthias Dieter Wallnöfer1-4/+39
Signed-off-by: Andrew Tridgell <tridge@samba.org>
2011-10-11ldb:ldb.c/"ldb_wait" - change "ldb_wait" slightly in order to introduce ↵Matthias Dieter Wallnöfer1-3/+5
error messages In this occasion remove a redundant check for "LDB_ASYNC_DONE": if (handle->state == LDB_ASYNC_DONE || if (handle->state == LDB_ASYNC_DONE) handle->status != LDB_SUCCESS) { return handle->status; return handle->status; == if (handle->status != LDB_SUCCESS) } return handle->status; ... ... return LDB_SUCCESS; return LDB_SUCCESS; Signed-off-by: Andrew Tridgell <tridge@samba.org>
2011-10-11ldb:ldb.c/"ldb_request" - make "ldb_request" always return an error stringMatthias Dieter Wallnöfer1-1/+15
Signed-off-by: Andrew Tridgell <tridge@samba.org>
2011-10-11ldb:ldb.c - "ldb_set_errstring" can be implemented by using ↵Matthias Dieter Wallnöfer1-10/+7
"ldb_asprintf_errstring" Signed-off-by: Andrew Tridgell <tridge@samba.org>
2011-10-11ldb:ldb_autotransaction_request - fix a typo in a commentMatthias Dieter Wallnöfer1-1/+1
Signed-off-by: Andrew Tridgell <tridge@samba.org>
2011-10-11lib/param Avoid dyn_ defines that are not provided by the autoconf buildAndrew Bartlett1-3/+5
The autoconf build will never use these parameters or load the smb.conf with these defaults, so the defaults are not important. Andrew Bartlett
2011-10-11lib/param Use strcasecmp_m rather than strcasecmp as this is banned in the ↵Andrew Bartlett1-2/+2
s3 includes.h
2011-10-11lib/param Use talloc_strdup rather than strdup as strdup is banned in the s3 ↵Andrew Bartlett1-3/+3
includes.h
2011-10-11lib/param Avoid the name string_set as this is already used in the s3 param codeAndrew Bartlett1-14/+14
2011-10-11lib/param Avoid the use of the name service_ok() which is used in the s3 ↵Andrew Bartlett1-4/+4
param code
2011-10-11lib/param: Remove unused #include of lib/socket/socket.hAndrew Bartlett1-1/+0
2011-10-11libcli/smb Move CSC_POLICY_* definition to smb_constants.hAndrew Bartlett1-6/+0
This removes the duplicate definition between smb.h and lib/param/loadparm.c which in turn allows this file to be compiled with the s3 includes.h Andrew Bartlett
2011-10-11lib/param move source4 param code to the top levelAndrew Bartlett6-0/+4652
This is done so that the lpcfg_ functions are available across the whole build, either with the struct loadparm_context loaded from an smb.conf directly or as a wrapper around the source3 param code. This is not the final, merged loadparm, but simply one step to make it easier to solve other problems while we make our slow progress on this difficult problem. Andrew Bartlett
2011-10-10ldb: change version to 1.1.3 after pyldb changesStefan Metzmacher3-1/+259
metze Autobuild-User: Stefan Metzmacher <metze@samba.org> Autobuild-Date: Mon Oct 10 14:24:25 CEST 2011 on sn-devel-104
2011-10-07Revert "ldb: support raw OIDs in control string parsing"Stefan Metzmacher2-19/+0
This reverts commit ea41860d32d38448e08cefd79d30ee1150317a9e. This is not needed, because we already have the 'local_oid' magic. metze
2011-10-07ldb/ldb_controls: allow oid up to 255 charsStefan Metzmacher1-1/+1
We have char oid[256], so allow sscanf() to consume 255 chars. metze
2011-10-07uid_wrapper: Add uwrap_setresuid().Andreas Schneider2-0/+17
Autobuild-User: Andreas Schneider <asn@cryptomilk.org> Autobuild-Date: Fri Oct 7 12:04:05 CEST 2011 on sn-devel-104
2011-10-07uid_wrapper: Add uwrap_setregid().Andreas Schneider2-0/+17
2011-10-07uid_wrapper: Add uwrap_setreuid().Andreas Schneider2-0/+17
2011-10-07build: Reduce build systems to just top level waf and autoconfAndrew Bartlett1-7/+6
The s3-waf build system is a key component of the top level build, but with this commit is is no longer available directly. This reduces the number of build system combinations in master as we prepare for the Samba 4.0 release. Andrew Bartlett
2011-10-06s3: Use the uid_wrapperVolker Lendecke1-0/+3
Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Andreas Schneider <asn@samba.org>
2011-10-06uid_wrapper: We have talloc_array_length, no need for an explicit lengthVolker Lendecke1-9/+9
Signed-off-by: Andreas Schneider <asn@samba.org>
2011-10-06lib/util: consolidate module loadingAndrew Bartlett2-32/+36
Autobuild-User: Andrew Bartlett <abartlet@samba.org> Autobuild-Date: Thu Oct 6 08:52:30 CEST 2011 on sn-devel-104
2011-10-06modules: standardise on samba_init_module as the hook symbol to resolveAndrew Bartlett2-4/+4
2011-10-06lib/util: Use only init_module_fn typedef in module loadingAndrew Bartlett2-3/+2
2011-10-06lib/util: Remove unused module loading functionsAndrew Bartlett2-14/+2
2011-10-06lib/util: consolidate module loading into common codeAndrew Bartlett3-0/+314
This creates a samba-modules private libary that handles the details. Andrew Bartlett
2011-10-06ldb: support raw OIDs in control string parsingAndrew Tridgell2-0/+19
this makes it possible to use a raw OID string on the command line or in python scripts Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
2011-10-06ldb: fixed memory leak in control string parsingAndrew Tridgell1-0/+24
if parsing fails, free ctrl Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
2011-10-04lib/util: make sure panic action can attach a debugger on ubuntu (>=10.10)Stefan Metzmacher1-0/+7
By default user processes can't attach a debugger to a process. So explicitly allow that for all child processes, before calling the panic action script. metze
generated by cgit (git 2.34.1) at 2024-12-18 19:24:09 +0000