summaryrefslogtreecommitdiff
path: root/source3/Makefile.in
AgeCommit message (Collapse)AuthorFilesLines
2012-10-11vfs: Remove irixacl module (all the fucntions in it are unimplemented)Andrew Bartlett1-5/+0
2012-10-11vfs: Implement a sys_acl_blob_get_{fd,file} for POSIX ACL backendsAndrew Bartlett1-1/+1
This simply linearlises the SMB_ACL_T (default and access acl for directories) and the file owner, group and mode into a blob. It will be useful for an improved vfs_acl_common.c that uses this sets that, rather than the hash of the NT ACL, in the xattr This will in turn insulate the stored hash from changes in the ACL mapping. Andrew Bartlett
2012-09-29libcli/smb: add smb1cli_echo*Stefan Metzmacher1-0/+1
metze
2012-09-29libcli/smb: add smb2cli_echo*Stefan Metzmacher1-0/+1
metze
2012-09-26samba_dnsupdate: Move to using tmpfile/rename to keep the dns_hosts_file ↵Andrew Bartlett1-1/+1
consistent This may be the cause of some of the large failure modes on the build farm. Andrew Bartlett
2012-09-08s3:vfs_default: add basic support for durable handle request and reconnectMichael Adam1-0/+1
We only grant durable handles for CIFS/SMB2 only access, that means "kernel oplocks", "kernel share modes" and "posix locking" need to be set to "no". For now we also don't grant durable handles if delete on close is active on the handle. Pair-Programmed-With: Stefan Metzmacher <metze@samba.org> Pair-Programmed-With: Volker Lendecke <vl@samba.org>
2012-09-02s3: add sysquotas_4B supportBjörn Jacke1-1/+1
this is from James Peach's darwin patch, that exists since a couple of years already. Autobuild-User(master): Björn Jacke <bj@sernet.de> Autobuild-Date(master): Sun Sep 2 01:00:41 CEST 2012 on sn-devel-104
2012-08-20s3-build: Enable vfs_fake_acls when in developer mode or on the build farmAndrew Bartlett1-0/+5
2012-08-17s3: Remove the gpfs_hsm_notify moduleVolker Lendecke1-5/+0
The functionality has been merged into vfs_gpfs Signed-off-by: Christian Ambach <ambi@samba.org>
2012-08-16s3-autoconf: Fix deps for dbwrap_tortureVolker Lendecke1-1/+1
Signed-off-by: Christian Ambach <ambi@samba.org>
2012-08-16s3:utils: remove standalone cclean toolGregor Beck1-11/+1
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
2012-08-16s3:net add command "connections cleanup"Gregor Beck1-1/+1
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
2012-08-08build: Remove pdbtest from the autoconf buildAndrew Bartlett1-12/+1
pdbtest is internal test utility that is not installed. It is only run from the full (waf) make test, and does not need to be built in the autoconf build. Removing it from the autoconf build makes it easier to expand this test to depend on more parts of Samba. Andrew Bartlett
2012-08-07source3/loadparm.c: Move string_set/string_free inside.Rusty Russell1-1/+1
The only user, so make them static inside loadparm.c Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Bartlett <abartlet@samba.org>
2012-08-07media_harmony VFS module: Add and build by default.Andrew Klaassen1-0/+5
- Supersedes previous patch. - Added various fixes for fake mtime functionality. - Now requires lp_cache_locked_write_times patch (bug 8912). - Removed various xattr functions to comply with recent VFS changes. - Changed SMB_STRUCT_DIR to DIR and SMB_STRUCT_DIRENT to struct dirent to comply with recent VFS changes. - Added manpage. - Added sample trigger_avid_update.py script. Autobuild-User(master): Björn Jacke <bj@sernet.de> Autobuild-Date(master): Tue Aug 7 15:16:39 CEST 2012 on sn-devel-104
2012-07-27s3:vlp: fix build on OS XBjörn Jacke1-0/+1
Autobuild-User(master): Björn Jacke <bj@sernet.de> Autobuild-Date(master): Fri Jul 27 03:13:59 CEST 2012 on sn-devel-104
2012-07-26s3: use libreplace in pthreadpooltest to fix some buildsBjörn Jacke1-1/+1
2012-07-23lib/crypto: add aes_ccm_128Stefan Metzmacher1-1/+1
metze
2012-07-20Remove source3/lib/pidfile.cJeremy Allison1-8/+1
Autobuild-User(master): Jeremy Allison <jra@samba.org> Autobuild-Date(master): Fri Jul 20 03:57:20 CEST 2012 on sn-devel-104
2012-07-19Fix the configure build - add lib/util/pidfile.o into UTIL_OBJ.Jeremy Allison1-1/+1
2012-07-18s3: Add tevent_wait_send/recvVolker Lendecke1-0/+1
To me it seems that we might have this functionality already somewere... I just can't find it. Metze, do you have an idea? Signed-off-by: Jeremy Allison <jra@samba.org>
2012-07-18s3: Add vfs_aio_posixVolker Lendecke1-0/+5
Signed-off-by: Jeremy Allison <jra@samba.org>
2012-07-18s3:vfs_aio_pthread: Convert to libasysVolker Lendecke1-0/+1
Signed-off-by: Jeremy Allison <jra@samba.org>
2012-07-17s3-autoconf: Fix the build.Günther Deschner1-11/+3
Guenther Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org> Autobuild-Date(master): Tue Jul 17 16:17:06 CEST 2012 on sn-devel-104
2012-07-12s3/torture: adjust dependency to fix build when no winbind was build beforeBjörn Jacke1-1/+1
Autobuild-User(master): Björn Jacke <bj@sernet.de> Autobuild-Date(master): Thu Jul 12 14:44:14 CEST 2012 on sn-devel-104
2012-07-03s3-passdb: Remove obsolte ldapsam_compat support.Andreas Schneider1-2/+0
2012-07-03s3-winbind: Remove obsolte idmap_adex.Andreas Schneider1-13/+0
2012-06-29s3:smbd: add smbXsrv_open* infrastructureStefan Metzmacher1-0/+1
Pair-Programmed-With: Michael Adam <obnox@samba.org> metze
2012-06-28Replace all uses of setXX[ug]id() and setgroups with samba_setXX[ug]id() calls.Jeremy Allison1-2/+4
Will allow thread-specific credentials to be added by modifying the central definitions. Deliberately left the setXX[ug]id() call in popt as this is not used in Samba.
2012-06-27s3: add a tool "cclean" to cleanup orphaned entries from connections.tdbGregor Beck1-1/+12
Signed-off-by: Michael Adam <obnox@samba.org>
2012-06-25s3:Makefile: use our "$MAKE" instead of "make" in our own MakefileBjörn Jacke1-2/+2
2012-06-25s3:smbd: add smbXsrv_tcon infrastructureStefan Metzmacher1-0/+1
Pair-Programmed-With: Michael Adam <obnox@samba.org> metze
2012-06-25s3:smbd: add smbXsrv_session infrastructureStefan Metzmacher1-0/+1
Pair-Programmed-With: Michael Adam <obnox@samba.org> metze
2012-06-25s3:smbd: add smbXsrv_version_* infrastructureStefan Metzmacher1-0/+1
metze
2012-06-25s3:librpc: add smbXsrv.idlStefan Metzmacher1-0/+1
metze
2012-06-22dbwrap: dbwrap_local_open()Rusty Russell1-0/+1
This simply opens a tdb: it will eventually switch depending on the extension. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-22util_tdb: move timeout chainlock variants from source3/lib/util/util_tdb.cRusty Russell1-1/+24
We're about to use them for dbwrap. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-19ntdb: add autoconf support.Rusty Russell1-0/+8
This is copied from tdb; we build the utilities, but as nothing else links against it, we shouldn't be adding anything to the normal samba binary sizes. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Autobuild-User(master): Rusty Russell <rusty@rustcorp.com.au> Autobuild-Date(master): Tue Jun 19 07:31:06 CEST 2012 on sn-devel-104
2012-06-18Revert "s3: temporary hack to make the waf build work withouth autotools ↵Björn Jacke1-1/+0
being required" This reverts commit f1becfa27b6b4e35541e6df0cafdec0ad47d2e3f. The hack was actually only required due to a configuration issue in our buildfarm scripts. Autobuild-User(master): Björn Jacke <bj@sernet.de> Autobuild-Date(master): Mon Jun 18 20:07:08 CEST 2012 on sn-devel-104
2012-06-18s3:autoconf: add -Iautoconf -Iautoconf/source3 at configure stageStefan Metzmacher1-2/+0
There're some configure tests which require this. metze
2012-06-18s3:Makefile.in: remove pidl generated files with 'make realdistclean'Stefan Metzmacher1-0/+1
metze
2012-06-18s3:Makefile.in: fix 'make realdistclean' after moving generated files to ↵Stefan Metzmacher1-1/+1
autoconf/ metze
2012-06-18s3:Makefile.in: fix 'make clean' after moving generated files to autoconf/Stefan Metzmacher1-6/+5
metze
2012-06-16s3-auth: Remove auth_netlogondAndrew Bartlett1-5/+0
auth_netlogond was an important module in the development of the combined Samba 4.0, and was the first module to link smbd with the AD authentication store, showing that it was possible for NTLM authentication to be offloaded to the AD server components. We now have auth_samba4, which provides the full GENSEC stack to smbd, which also matches exactly the group membership and privileges assignment and which is supported and tested as part of the official Samba 4.0 release configuration. Andrew Bartlett Autobuild-User(master): Andrew Bartlett <abartlet@samba.org> Autobuild-Date(master): Sat Jun 16 10:13:20 CEST 2012 on sn-devel-104
2012-06-16s3-passdb: Remove pdb_adsAndrew Bartlett1-4/+0
pdb_ads was an important module in the development of the combined Samba 4.0, and was the first module to show that standard samba3 tools such as smbpasswd can be made to operate on the sam.ldb. We now have pdb_samba4, which operates directly on the sam.ldb, rather than via ldapi://, which uses transactions and which is supported and tested as part of the official Samba 4.0 release configuration. This module is not as complete (for example, it does not honour the idmap configuration) and requires that the samba binary be running to operate. Andrew Bartlett
2012-06-15s3-build: Do not write loadparm generated files into the build treeAndrew Bartlett1-13/+13
We need to keep these files away from where waf might see them. Andrew Bartlett Autobuild-User(master): Andrew Bartlett <abartlet@samba.org> Autobuild-Date(master): Fri Jun 15 11:10:14 CEST 2012 on sn-devel-104
2012-06-08s3-rpcclient: add fsrvp commandsDavid Disseldorp1-2/+6
fss_create_expose connects to an FSRVP server and negotiates the creation and exposure of a share shadow-copy. shadow-copies of multiple shares can be requested with a single fss_create_expose request. ddiss@plati:~> bin/rpcclient -k -U 'LURCH\administrator%password' \ ncacn_np:lutze[sign] rpcclient $> fss_create_expose backup ro hyper 381884f2-b578-45ea-b8d2-cf82491f4011: shadow-copy set created ... share hyper@{B6137E21-9CBB-4547-A21D-E7AD40D0874B} exposed as a snapshot of \\lutze\hyper fss_delete removes the shadow-copy share: rpcclient $> fss_delete hyper 381884f2-b578-45ea-b8d2-cf82491f4011 \ b6137e21-9cbb-4547-a21d-e7ad40d0874 Shadow-copies can be created read-write or read-only. Experimenting with Windows Server "8" beta, a recovery complete call is required after creating a read-write (ATTR_AUTO_RECOVERY) shadow copy. Otherwise subsequent creation requests fail with FSRVP_E_SHADOW_COPY_SET_IN_PROGRESS.
2012-06-05s3: temporary hack to make the waf build work withouth autotools being requiredBjörn Jacke1-0/+1
this also disables the examples/VFS build for waf now. Finally we should create a wscript file for examples/VFS. Autobuild-User: Björn Jacke <bj@sernet.de> Autobuild-Date: Tue Jun 5 23:56:22 CEST 2012 on sn-devel-104
2012-06-05s3: remove dependency on automake for "make everything"Björn Jacke1-1/+0
the dependency was introduced by 737a1c9b96a4ba8d8688f4dba1df6d931e10e64d We now call auto* in examples/VFS from within the main autogen.sh. This fixes bug #8978. Autobuild-User: Björn Jacke <bj@sernet.de> Autobuild-Date: Tue Jun 5 17:32:22 CEST 2012 on sn-devel-104
2012-06-03s3-build: Remove finddeadAndrew Bartlett1-9/+0
This won't work with the new tree structure, and we have the same output at https://build.samba.org/lcov/data/coverage/samba_4_0_test/unused-fns.txt Using the callcatcher framework. Andrew Bartlett
generated by cgit (git 2.34.1) at 2024-12-30 10:34:30 +0000