Age | Commit message (Collapse) | Author | Files | Lines |
|
to handle domain trusts. Jeremy and I talked about this
and it's going in as working code. It keeps winbind clean
and solves the trust problem with minimal changes.
To summarize, there are 2 basic cases where the deadlock would
occur. (1) lookuping up secondary groups for a user, and
(2) get[gr|pw]nam() calls that fall through the NSS layer because
they don't exist anywhere.
o To handle case #1, we bypass winbindd in sys_getgrouplist() unless
the username includes the 'winbind separator'.
o Case #2 is handled by adding checks in winbindd to return failure
if we are a DC and the domain matches our own.
This code has been tested using basic share connections, domain
logons, and with pam_winbind (both with and without 'winbind
use default domain'). The 'trustdomain' auth module should work
as well if an admin wants to manually create UNIX users for
acounts in the trusted domains.
Other misc fixes:
* we need to fix check_ntlm_password() to be able to determine
if an auth module is authoritative over a user (NT_STATUS_WRONG_PASSWORD,
etc...). I worked around my specific situation, but this needs to be
fixed. the winbindd auth module was causing delays.
* fix named server mutex deadlock between trust domain auth module
and winbindd looking up a uid
* make sure SAM_ACCOUNT gets stored in the server_info struct for the
_net_sam_logon() reply.
Configuration details:
The recommended method for supporting trusts is to use winbind.
The gets us around some of the server mutex issues as well.
* set 'files winbind' for passwd: and group: in /etc/nsswitch.conf
* create domain trusts like normal
* join winbind on the pdc to the Samba domain using 'net rpc join'
* add normal parameters to smb.conf for winbind
* set 'auth method = guest sam winbind'
* start smbd, nmbd, & winbindd
Problems that remain:
* join a Windows 2k/XP box to a Samba domain.
* create a 2-way trust between the Samba domain
and an NT domain
* logon to the windows client as a user from theh trusted
domain
* try to browse server in the trusted domain (or other
workstations). an NT client seems to work ok, but 2k
and XP either prompt for passwords or fail with errors.
apparanently this never got tested since no one has ever been
able to logon as a trusted user to a Samba domain from a Windows
client.
(This used to be commit f804b590f9dbf1f0147c06a0a2f12e221ae6fc3b)
|
|
map to guest = bad user works again when "trustdomain" is listed
as last auth method.
Also clean up some more DC location calls.
(This used to be commit 77a5b1032f39b8d20925721b719fdcfff910cb06)
|
|
(This used to be commit d376b67de9ff7a43c9c03c8640d9fe1671d223cb)
|
|
I'm still not convinced that sharing the option name with the administrative
code is the best idea, but anyway...
Tested by vl, bug #41.
Andrew Bartlett
(This used to be commit 9d78f064c5e4e6b340f994204977aaac6513320b)
|
|
(This used to be commit 1480c7e8c7a84c34181118c449c50ca99fdcbc6b)
|
|
modules in auth/
(This used to be commit 4b6785a6c0fe0aebb1cc69bfc9937d19bc692642)
|
|
(This used to be commit dbe36b4c43dceddea9f14161c6cf7b34709287c8)
|
|
function. Patch by metze with some minor modifications.
(This used to be commit bc4b51bcb2daa7271c884cb83bf8bdba6d3a9b6d)
|
|
- better error codes than NT_STATUS_UNSUCCESSFUL for domain logon errors
- make auth_winbind load the ntdomain module if winbind isn't there.
- use new trusted domains cache to determine if the domain is valid.
Andrew Bartlett
(This used to be commit ec8d6524c6b0c70927a2b57aab71d9e3a7f8a150)
|
|
(This used to be commit c7a1de090db35835be1a1623bfc80c04065c5dd9)
|
|
(This used to be commit 7a2566f2e922191e691b6dafb1a09e22913cccd6)
|
|
- NTLMSSP over SPENGO (sesssion-setup-and-x) cleanup and code refactor.
- also consequential changes to the NTLMSSP and SPNEGO parsing functions
- and the client code that uses the same functions
- Add ntlm_auth, a NTLMSSP authentication interface for use by applications
like Squid and Apache.
- also consquential changes to use common code for base64 encode/decode.
- Winbind changes to support ntlm_auth (I don't want this program to need
to read smb.conf, instead getting all it's details over the pipe).
- nmbd changes for fstrcat() instead of fstrcpy().
Andrew Bartlett
(This used to be commit fbb46da79cf322570a7e3318100c304bbf33409e)
|
|
warnings. (Adds a lot of const).
Andrew Bartlett
(This used to be commit 3a7458f9472432ef12c43008414925fd1ce8ea0c)
|
|
named. Ensure we can query them.
Jeremy.
(This used to be commit 09a218a9f6fb0bd922940467bf8500eb4f1bcf84)
|
|
Jeremy.
(This used to be commit ec4ed45563f9d8e25fcfd88840944a90b3139c3e)
|
|
dashes of const. This is a rather large check-in, some things may break.
It does compile though :-).
Jeremy.
(This used to be commit f755711df8f74f9b8e8c1a2b0d07d02a931eeb89)
|
|
(This used to be commit 3928578b52cfc949be5e0ef444fce1558d75f290)
|
|
(This used to be commit 03ac082dcb375b6f3ca3d810a6a6367542bc23ce)
|
|
(This used to be commit 1f007d3ed41c1b71a89fa6be7d173e67e927c302)
|
|
This commit builds on the auth subsystem to give Samba support for trusting NT4
domains. It is off by default, but is enabled by adding 'trustdomain' to the
'auth methods' smb.conf paramater.
Tested against NT4 only - there are still some issues with the join code for
Win2k servers (spnego stuff).
The main work TODO involves enumerating the trusted domains (including the RPC
calls to match), and getting winbind to run on the PDC correctly.
Similarly, work remains on getting NT4 to trust Samba domains.
Andrew Bartlett
(This used to be commit ac8c24a9a888a3f916e8b40238b936e6ad743ef7)
|
|
Changed "SMB/Netbios" to "SMB/CIFS" in file header.
(This used to be commit 6a58c9bd06d0d7502a24bf5ce5a2faf0a146edfa)
|
|
(This used to be commit e67c7c5852624bcdd5c565ea5f00b143aaf7fee4)
|
|
The auth_authsupplied_info typedef is now just a plain struct - auth_context,
but it has been modified to contain the function pointers to the rest
of the auth subsystem's components.
(Who needs non-static functions anyway?)
In working all this mess out, I fixed a number of memory leaks and moved the
entire auth subsystem over to talloc().
Note that the TALLOC_CTX attached to the auth_context can be rather long-lived,
it is provided for things that are intended to live as long. (The
global_negprot_auth_context lasts the whole life of the smbd).
I've also adjusted a few things in auth_domain.c, mainly passing the domain as
a paramater to a few functions instead of looking up lp_workgroup(). I'm
hopign to make this entire thing a bit more trusted domains (as PDC) freindly
in the near future.
Other than that, I moved a bit of the code around, hence the rather messy diff.
Andrew Bartlett
(This used to be commit 12f5515f556cf39fea98134fe3e2ac4540501048)
|
|
- Move rpc_client/cli_trust.c to smbd/change_trust_pw.c
- It hasn't been used by anything else since smbpasswd lost its -j
- Add a TALLOC_CTX to the auth subsytem. These are only valid for the length
of the calls to the individual modules, if you want a longer context hide it
in your private data.
Similarly, all returns (like the server_info) should still be malloced.
- Move the 'ntdomain' module (security=domain in oldspeak) over to use the new
libsmb domain logon code. Also rework much of the code to use some better
helper functions for the connection - getting us much better error returns
(the new code is NTSTATUS).
The only remaining thing to do is to figure out if tpot's 0xdead 0xbeef for
the LUID feilds is sufficient, or if we should do random LUIDs as per the old
code.
Similarly, I'll move winbind over to this when I get a chance.
This leaves the SPOOLSS code and some cli_pipe code as the only stuff still in
rpc_client, at least as far as smbd is concerned.
While I've given this a basic rundown, any testing is as always appriciated.
Andrew Bartlett
(This used to be commit d870edce76ecca259230fbdbdacd0c86793b4837)
|
|
probably will never actually be genearted, but I like the style in any case.
Also fix a segfault in 'net rpc' when the login failed and a small memory leak
on failure in the auth_info.c code.
Andrew Bartlett
(This used to be commit 2efae7cc522651c22fb120835bc800645559b63e)
|
|
the method used for checking if a domain is a trusted domain is very
crude, we should really call a backend fn of some sort. For now I'm
using winbindd to do the dirty work.
(This used to be commit adf44a9bd0d997ba4dcfadc564a29149531525af)
|
|
(This used to be commit 1bd3235744bebefa6ba09795438400b4674c165c)
|
|
fix a memory leak
(This used to be commit 1421f2fbcb296a894cb4e7548e0275e35e055b98)
|
|
We now default encrypt passwords = yes
We now check plaintext passwords (however aquired) with the 'sam' backend
rather than unix, if encrypt passwords = yes.
(this kills off the 'local' backed. The sam backend may be renamed in its
place)
The new 'samstrict' wrapper backend checks that the user's domain is one of
our netbios aliases - this ensures that we don't get fallback crazies with
security = domain.
Similarly, the code in the 'ntdomain' and 'smbserver' backends now checks
that the user was not local before contacting the DC.
The default ordering has changed, we now check the local stuff first - but
becouse of the changes above, we will really only ever contact one
auth source.
Andrew Bartlett
(This used to be commit e89b47f65e7eaf5eb288a3d6ba2d3d115c628e7e)
|
|
(This used to be commit d6318add27f6bca5be00cbedf2226b642341297a)
|
|
subystem.
The particular aim is to modularized the interface - so that we
can have arbitrary password back-ends.
This code adds one such back-end, a 'winbind' module to authenticate
against the winbind_auth_crap functionality. While fully-functional
this code is mainly useful as a demonstration, because we don't get
back the info3 as we would for direct ntdomain authentication.
This commit introduced the new 'auth methods' parameter, in the
spirit of the 'auth order' discussed on the lists. It is renamed
because not all the methods may be consulted, even if previous
methods fail - they may not have a suitable challenge for example.
Also, we have a 'local' authentication method, for old-style
'unix if plaintext, sam if encrypted' authentication and a
'guest' module to handle guest logins in a single place.
While this current design is not ideal, I feel that it does
provide a better infrastructure than the current design, and can
be built upon.
The following parameters have changed:
- use rhosts =
This has been replaced by the 'rhosts' authentication method,
and can be specified like 'auth methods = guest rhosts'
- hosts equiv =
This needs both this parameter and an 'auth methods' entry
to be effective. (auth methods = guest hostsequiv ....)
- plaintext to smbpasswd =
This is replaced by specifying 'sam' rather than 'local'
in the auth methods.
The security = parameter is unchanged, and now provides defaults
for the 'auth methods' parameter.
The available auth methods are:
guest
rhosts
hostsequiv
sam (passdb direct hash access)
unix (PAM, crypt() etc)
local (the combination of the above, based on encryption)
smbserver (old security=server)
ntdomain (old security=domain)
winbind (use winbind to cache DC connections)
Assistance in testing, or the production of new and interesting
authentication modules is always appreciated.
Andrew Bartlett
(This used to be commit 8d31eae52a9757739711dbb82035a4dfe6b40c99)
|
|
(This used to be commit 80667cb0dd1a2cdef17711c8580af9f524971cea)
|
|
This changes the way we process guest logons - we now treat them as normal
logons, but set the 'guest' flag. In particular this is needed becouse Win2k
will do an NTLMSSP login with username "", therefore missing our previous guest
connection code - this is getting a pain to do as a special case all over the
shop.
Tridge: We don't seem to be setting a guest bit for NTLMSSP, in either the
anonymous or authenticated case, can you take a look at this?
Also some cleanups in the check_password() code that should make some of the
debugs clearer.
Various other minor cleanups:
- change the session code to just take a vuser, rather than having to do a
vuid lookup on vuser.vuid
- Change some of the global_client_caps linking
- Better debug in authorise_login(): show the vuid.
Andrew Bartlett
(This used to be commit 62f4e4bd0aef9ade653b3f8d575d2864c166ab4d)
|
|
code.
In particular this assists tpot in some of his work, becouse it provides the
connection between the authenticaion and the vuid generation.
Major Changes:
- Fully malloc'ed structures.
- Massive rework of the code so that all structures are made and destroyed
using malloc and free, rather than hanging around on the stack.
- SAM_ACCOUNT unix uids and gids are now pointers to the same, to allow them
to be declared 'invalid' without the chance that people might get ROOT by
default.
- kill off some of the "DOMAIN\user" lookups. These can be readded at a more
appropriate place (probably domain_client_validate.c) in the future. They
don't belong in session setups.
- Massive introduction of DATA_BLOB structures, particularly for passwords.
- Use NTLMSSP flags to tell the backend what its getting, rather than magic
lenghths.
- Fix winbind back up again, but tpot is redoing this soon anyway.
- Abstract much of the work in srv_netlog_nt back into auth helper functions.
This is a LARGE change, and any assistance is testing it is appriciated.
Domain logons are still broken (as far as I can tell) but other functionality
seems
intact.
Needs testing with a wide variety of MS clients.
Andrew Bartlett
(This used to be commit f70fb819b2f57bd57232b51808345e2319d52f6c)
|
|
To obtain the full group membership of a user (i.e nested groups on a
win2k native mode server) it is necessary to merge this list of groups
with the groups returned by winbindd when creating an nt access token.
This breaks winbindd linking while AB and I sync up our changes to the
authentication subsystem.
(This used to be commit 4eeb7bcd783d7cfb3ac232f1faa035773007401d)
|
|
(This used to be commit 2d0922b0eabfdc0aaf1d0797482fef47ed7fde8e)
|
|
The big one is a global change to allow us to NULLify the free'ed pointer to a
former passdb object. This was done to allow idra's SAFE_FREE() macro to do
its magic, and to satisfy the input test in pdb_init_sam() for a NULL pointer
to start with.
This NULL pointer test was what was breaking the adding of accounts up until
now, and this code has been reworked to avoid duplicating work - I hope this
will avoid a similar mess-up in future.
Finally, I fixed a few nasty bugs where the pdb_ fuctions's return codes were
being ignored. Some of these functions malloc() and are permitted to fail.
Also, this caught a nasty bug where pdb_set_lanman_password(sam, NULL) acheived
precisely didilly-squat, just returning False. Now that we check the returns
this bug was spotted. This could allow different LM and NT passwords.
- the pdbedit code needs to start checking these too, but I havn't had a
chance to fix it.
I have also fixed up where some of the password changing code was using the
pdb_set functions to store *internal* data. I assume this is from a previous
lot of mass conversion work...
Most likally (and going on past experience) I have missed somthing, probably in
the LanMan password change code which I havn't yet been able to test, but this
lot is in much better shape than it was before.
If all this is too much to swallow (particularly for 2.2.2) then just adding a
sam_pass = NULL to the particular line of passdb.c should do the trick for the
ovbious bug.
Andrew Bartlett
(This used to be commit 762c8758a7869809d89b4da9c2a5249678942930)
|
|
they can have general effect.
Fixed up workstaion support in the rest of samba, so that we can do these
checks.
Pass through the workstation for cli_net_logon(), if supplied.
(This used to be commit 7f04a139b2ee34b4c282590509cdf21395815a7a)
|
|
- the usersupplied_info now contains a smb_username (as it comes across on
the wire) and a unix_username (after being passed through mapping
functions)
- when doing security={server,domain} use the smb_username, otherwise use
the unix_username
(This used to be commit d34fd8ec0716127c7a68eeb8e77d1ae8cc07b547)
|
|
the client code still needs some work
(This used to be commit dcd6e735f709a9231860ceb9682db40ff26c9a66)
|
|
(This used to be commit 1d36250e338ae0ff9fbbf86019809205dd97d05e)
|
|
to make it type incompatible with BOOL so we catch errors sooner. This has already found a number of bugs
(This used to be commit 1b778bc7d22efff3f90dc450eb12baa1241cf68f)
|
|
(This used to be commit 0768991d04ea03e774ca8662c9cae5e1951b88e0)
|
|
(This used to be commit afece03d023b2905c27e147516b61487a7503028)
|
|
(This used to be commit a25911d58c752350b62b205cfb0d6fc5b1c90cef)
|
|
In particuar, it moves the domain_client_validate stuff out of
auth_domain.c to somwhere where they (I hope) they can be shared
with winbind better. (This may need some work)
The main purpose of this patch was however to improve some of the
internal documentation and to correctly place become_root()/unbecome_root()
calls within the code.
Finally this patch moves some more of auth.c into other files, auth_unix.c
in this case.
Andrew Bartlett
(This used to be commit ea1c547ac880def29f150de2172c95213509350e)
|
|
(This used to be commit ef01739708479c43f529c646dd136ee5670b08f9)
|
|
Fix typo in lmhosts manpage
(This used to be commit 9fff946cf113b4858b730f5ba644d5648ba95027)
|
|
which I will confirm once I can find a box it would break on in the first place.
(this is the pam accounts as nobody thing we had with 2.2.0)
Andrew Bartlett
(This used to be commit 9746ad12bd2d310e5c255c7ea491b87170b807af)
|
|
samba-technical a few weeks ago.
The idea here is to standardize the checking of user names and passwords,
thereby ensuring that all authtentications pass the same standards. The
interface currently implemented in as
nt_status = check_password(user_info, server_info)
where user_info contains (mostly) the authentication data, and server_info
contains things like the user-id they got, and their resolved user name.
The current ugliness with the way the structures are created will be killed
the next revision, when they will be created and malloced by creator functions.
This patch also includes the first implementation of NTLMv2 in HEAD, but which
needs some more testing. We also add a hack to allow plaintext passwords to be
compared with smbpasswd, not the system password database.
Finally, this patch probably reintroduces the PAM accounts bug we had in
2.2.0, I'll fix that once this hits the tree. (I've just finished testing
it on a wide variety of platforms, so I want to get this patch in).
(This used to be commit b30b6202f31d339b48d51c0d38174cafd1cfcd42)
|