summaryrefslogtreecommitdiff
path: root/source3/configure.in
AgeCommit message (Collapse)AuthorFilesLines
2012-08-21build: Remove special case for the build farmAndrew Bartlett1-4/+4
Except in the formatting of the selftest output, this removes the special case of the build farm, so that an autobuild, a manual make test and the build farm are more similar. Andrew Bartlett Autobuild-User(master): Andrew Bartlett <abartlet@samba.org> Autobuild-Date(master): Tue Aug 21 06:39:04 CEST 2012 on sn-devel-104
2012-08-20s3-build: Enable vfs_fake_acls when in developer mode or on the build farmAndrew Bartlett1-0/+4
2012-08-17s3: Remove the gpfs_hsm_notify moduleVolker Lendecke1-2/+0
The functionality has been merged into vfs_gpfs Signed-off-by: Christian Ambach <ambi@samba.org>
2012-08-07media_harmony VFS module: Add and build by default.Andrew Klaassen1-0/+2
- Supersedes previous patch. - Added various fixes for fake mtime functionality. - Now requires lp_cache_locked_write_times patch (bug 8912). - Removed various xattr functions to comply with recent VFS changes. - Changed SMB_STRUCT_DIR to DIR and SMB_STRUCT_DIRENT to struct dirent to comply with recent VFS changes. - Added manpage. - Added sample trigger_avid_update.py script. Autobuild-User(master): Björn Jacke <bj@sernet.de> Autobuild-Date(master): Tue Aug 7 15:16:39 CEST 2012 on sn-devel-104
2012-07-26s3:configure: add Darwin sendfile() testBjörn Jacke1-0/+32
2012-07-18s3: Compile with pthreadpool by defaultVolker Lendecke1-5/+3
Signed-off-by: Jeremy Allison <jra@samba.org>
2012-07-18config: The AIO engine is indepent of HAVE_AIO nowVolker Lendecke1-19/+16
Compile the basic aio engine always, it works via libasys/pthreadpool_sync in a sync fashion even if no pthreads are around. Everything else (linux aio, posix aio, aio fork) is now compiled as modules based on specific system capabilities Signed-off-by: Jeremy Allison <jra@samba.org>
2012-07-18s3: Add vfs_aio_posixVolker Lendecke1-0/+5
Signed-off-by: Jeremy Allison <jra@samba.org>
2012-07-04Add waf/configure tests for openat.Jeremy Allison1-0/+18
Autobuild-User(master): Jeremy Allison <jra@samba.org> Autobuild-Date(master): Wed Jul 4 02:37:59 CEST 2012 on sn-devel-104
2012-07-03s3-winbind: Remove obsolte idmap_adex.Andreas Schneider1-1/+0
2012-07-03Fix the waf/autoconf builds to detect correctly the 32-bit or 64-bit syscall ↵Jeremy Allison1-20/+71
ABI on Linux. Autobuild-User(master): Jeremy Allison <jra@samba.org> Autobuild-Date(master): Tue Jul 3 05:32:21 CEST 2012 on sn-devel-104
2012-07-02Disable selections of USE_LINUX_THREAD_CREDENTIALS until we have specificJeremy Allison1-16/+20
32-bit and 64-bit versions. Autobuild-User(master): Jeremy Allison <jra@samba.org> Autobuild-Date(master): Mon Jul 2 03:02:47 CEST 2012 on sn-devel-104
2012-06-30s3: add sendfile support for Tru64, which is the same as HP-UX'sBjörn Jacke1-3/+3
2012-06-30Try and fix the autoconf build on Solaris/Nexenta/etc.Jeremy Allison1-1/+5
Their AC_TRY_RUN doesn't include any current CPPFLAGS. Make the set[res]uid checks independent of this. Needs a small change to the waf build in order to code with the change. Autobuild-User(master): Jeremy Allison <jra@samba.org> Autobuild-Date(master): Sat Jun 30 00:32:36 CEST 2012 on sn-devel-104
2012-06-29Fix typo in configure.in check for USE_LINUX_THREAD_CREDENTIALS.Jeremy Allison1-1/+1
2012-06-29s3:configure: fix numerous compile warnings about implicit declaration of 'exit'Björn Jacke1-27/+27
use return instead of exit in configure tests to fix those warnings: warning: incompatible implicit declaration of built-in function 'exit' Autobuild-User(master): Björn Jacke <bj@sernet.de> Autobuild-Date(master): Fri Jun 29 19:08:54 CEST 2012 on sn-devel-104
2012-06-29s3:build: tell linker to use corefoundation on all darwin releasesBjörn Jacke1-2/+2
Autobuild-User(master): Björn Jacke <bj@sernet.de> Autobuild-Date(master): Fri Jun 29 14:43:39 CEST 2012 on sn-devel-104
2012-06-29Move back to using per-thread credentials on Linux. Fixes the glibc native ↵Jeremy Allison1-1/+18
AIO lost wakeup problem. See this post: https://lists.samba.org/archive/samba-technical/2012-June/085101.html for details. Autobuild-User(master): Jeremy Allison <jra@samba.org> Autobuild-Date(master): Fri Jun 29 03:57:45 CEST 2012 on sn-devel-104
2012-06-28s3: fine tune and clean up statvfs testsBjörn Jacke1-7/+6
This should also fix the build on Tru64. Tru64 has a POSIX compliant statvfs() function while most *BSD systems ignore POSIX. Autobuild-User(master): Björn Jacke <bj@sernet.de> Autobuild-Date(master): Thu Jun 28 23:07:23 CEST 2012 on sn-devel-104
2012-06-19s3: We can depend on pthreadpool nowVolker Lendecke1-1/+0
Signed-off-by: Jeremy Allison <jra@samba.org>
2012-06-19s3: Add a dummy implementation for the pthreadpool APIVolker Lendecke1-3/+6
Signed-off-by: Jeremy Allison <jra@samba.org>
2012-06-19ntdb: add autoconf support.Rusty Russell1-0/+47
This is copied from tdb; we build the utilities, but as nothing else links against it, we shouldn't be adding anything to the normal samba binary sizes. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Autobuild-User(master): Rusty Russell <rusty@rustcorp.com.au> Autobuild-Date(master): Tue Jun 19 07:31:06 CEST 2012 on sn-devel-104
2012-06-18s3:autoconf: add -Iautoconf -Iautoconf/source3 at configure stageStefan Metzmacher1-1/+2
There're some configure tests which require this. metze
2012-06-18s3:autoconf-build: build the idmap backends tdb2, rid, and hash by default ↵Michael Adam1-0/+3
(shared) Autobuild-User(master): Michael Adam <obnox@samba.org> Autobuild-Date(master): Mon Jun 18 13:38:50 CEST 2012 on sn-devel-104
2012-06-18s3:configure: check for SPLICE_F_MOVE at configure stageStefan Metzmacher1-1/+1
This should fix the waf build on AIX, which has a splice symbol. metze Autobuild-User(master): Stefan Metzmacher <metze@samba.org> Autobuild-Date(master): Mon Jun 18 11:43:01 CEST 2012 on sn-devel-104
2012-06-16s3-auth: Remove auth_netlogondAndrew Bartlett1-2/+0
auth_netlogond was an important module in the development of the combined Samba 4.0, and was the first module to link smbd with the AD authentication store, showing that it was possible for NTLM authentication to be offloaded to the AD server components. We now have auth_samba4, which provides the full GENSEC stack to smbd, which also matches exactly the group membership and privileges assignment and which is supported and tested as part of the official Samba 4.0 release configuration. Andrew Bartlett Autobuild-User(master): Andrew Bartlett <abartlet@samba.org> Autobuild-Date(master): Sat Jun 16 10:13:20 CEST 2012 on sn-devel-104
2012-06-16s3-passdb: Remove pdb_adsAndrew Bartlett1-2/+0
pdb_ads was an important module in the development of the combined Samba 4.0, and was the first module to show that standard samba3 tools such as smbpasswd can be made to operate on the sam.ldb. We now have pdb_samba4, which operates directly on the sam.ldb, rather than via ldapi://, which uses transactions and which is supported and tested as part of the official Samba 4.0 release configuration. This module is not as complete (for example, it does not honour the idmap configuration) and requires that the samba binary be running to operate. Andrew Bartlett
2012-06-16build: Remove support for non-64bit sendfile()Andrew Bartlett1-18/+0
Some early Linux 2.6 platforms can not handle sendfile and _FILE_OFFSET_BITS == 64 This disables sendfile() on these platforms. Andrew Bartlett Autobuild-User(master): Andrew Bartlett <abartlet@samba.org> Autobuild-Date(master): Sat Jun 16 02:21:28 CEST 2012 on sn-devel-104
2012-06-07build: Tidy up broken posix_fallocate testsAndrew Bartlett1-2/+2
This makes the code and output for in waf and autoconf identical. Andrew Bartlett Autobuild-User(master): Andrew Bartlett <abartlet@samba.org> Autobuild-Date(master): Thu Jun 7 08:35:33 CEST 2012 on sn-devel-104
2012-06-07s3: enable winbind also for upcoming FreeBSD/NetBSD releases >=10Björn Jacke1-2/+2
2012-06-06build: Rationalise AIO support in configure, ensure on by defaultAndrew Bartlett1-20/+18
With this change, the define to check for AIO is HAVE_AIO, consistant with other subsystems. It is now also on by default in the autoconf build, as it has been for waf. Andrew Bartlett
2012-06-05build: Remove unused check for HAVE_UNSIGNED_CHARAndrew Bartlett1-8/+0
BTW, uint8_t check is in libreplace for both build systems.
2012-06-05s3:build(autoconf): fix "no AC_LANG_SOURCE call detected" warningsMartin Schwenke1-16/+16
Autoconf 2.68 NEWS says: ** The macros AC_PREPROC_IFELSE, AC_COMPILE_IFELSE, AC_LINK_IFELSE, and AC_RUN_IFELSE now warn if the first argument failed to use AC_LANG_SOURCE or AC_LANG_PROGRAM to generate the conftest file contents. A new macro AC_LANG_DEFINES_PROVIDED exists if you have a compelling reason why you cannot use AC_LANG_SOURCE but must avoid the warning. Signed-off-by: Martin Schwenke <martin@meltin.net>
2012-06-03libreplace: Link libreplace against attr when requiredAndrew Bartlett1-1/+1
The autoconf Samba build will return to over-linking with -lattr on systems with both the XFS compat API and native xattrs. Autobuild-User: Andrew Bartlett <abartlet@samba.org> Autobuild-Date: Sun Jun 3 03:56:05 CEST 2012 on sn-devel-104
2012-06-02build: Remove check for res_ninit (Revert "s3: Check for res_ninit")Andrew Bartlett1-8/+0
This reverts commit 4f6b1e8c81776cf1fa386574e60e54fe6b4fe82e because I cannot find any use of this configure check, and it is one of the differences between the WAF and autoconf builds. Andrew Bartlett
2012-06-02lib/replace: xattr wrappers in lib/replace rather than source3/lib/system.cAndrew Bartlett1-59/+0
This also moves all the still-used configure tests etc. The unused OSF API is also removed at this time. Andrew Bartlett
2012-06-01waf: check for krb5_create_checksum and krb5_creds.flags for some Heimdal ↵Alexander Bokovoy1-0/+12
versions Signed-off-by: Andreas Schneider <asn@samba.org> Autobuild-User: Andreas Schneider <asn@cryptomilk.org> Autobuild-Date: Fri Jun 1 11:23:21 CEST 2012 on sn-devel-104
2012-05-30s3-build: Fix configure checks for HeimdalAndrew Bartlett1-15/+15
A series of small errors meant that all Heimdal versions became unsupported, when for the autoconf build, some versions have what we need. Andrew Bartlett
2012-05-30build: Make gss_wrap_iov mandatory for krb5 buildAndrew Bartlett1-0/+5
This isn't in Heimdal 1.1, so we still fail on that version, but at least we fail for the right reasons. Andrew Bartlett
2012-05-30s3-build: We do not have CHARSET modules any moreAndrew Bartlett1-2/+0
2012-05-30s3-build: Remove build of libtdb.so from the autoconf buildAndrew Bartlett1-3/+1
We now either link tdb statically or we use the system provided tdb This means that we now only have one build system for externally-available tdb, which in turn ensures we have a consistent shared library built as libtdb.so Andrew Bartlett
2012-05-30s3-build: Remove build of libtalloc.so from the autoconf buildAndrew Bartlett1-3/+1
We now either link talloc statically or we use the system provided talloc This means that we now only have one build system for externally-available talloc, which in turn ensures we have a consistent shared library built as libtalloc.so Andrew Bartlett
2012-05-30s3-iconv: Remove unused script/gen-8bit-gap.shAndrew Bartlett1-1/+1
We decided to rely on a system iconv rather than these modules. Andrew Bartlett
2012-05-27build: Remove all references to libuuidAndrew Bartlett1-46/+2
We simply do not need this library any more. Andrew Bartlett Autobuild-User: Andrew Bartlett <abartlet@samba.org> Autobuild-Date: Sun May 27 11:08:22 CEST 2012 on sn-devel-104
2012-05-26s3-build: Remove build of libaddns.a from the autoconf buildAndrew Bartlett1-2/+0
We always link libaddns statically as part of the net object lists This means that we no longer provide externally-available libaddns, as the waf build declared this as a private library. This never had a public API, .so or a header file. Andrew Bartlett Autobuild-User: Andrew Bartlett <abartlet@samba.org> Autobuild-Date: Sat May 26 09:45:34 CEST 2012 on sn-devel-104
2012-05-25s3-configure.in: when ADS support is disabled, unset HAVE_GSSAPIAlexander Bokovoy1-0/+1
2012-05-23Introduce system MIT krb5 build with --with-system-mitkrb5 option.Alexander Bokovoy1-1/+1
System MIT krb5 build also enabled by specifying --without-ad-dc When --with-system-mitkrb5 (or --withou-ad-dc) option is passed to top level configure in WAF build we are trying to detect and use system-wide MIT krb5 libraries. As result, Samba 4 DC functionality will be disabled due to the fact that it is currently impossible to implement embedded KDC server with MIT krb5. Thus, --with-system-mitkrb5/--without-ad-dc build will only produce * Samba 4 client libraries and their Python bindings * Samba 3 server (smbd, nmbd, winbindd from source3/) * Samba 3 client libraries In addition, Samba 4 DC server-specific tests will not be compiled into smbtorture. This in particular affects spoolss_win, spoolss_notify, and remote_pac rpc tests.
2012-05-16s3:onefs: remove all onefs related code as it not maintained anymoreStefan Metzmacher1-24/+0
See https://lists.samba.org/archive/samba-technical/2012-May/083631.html for the discussion. metze Autobuild-User: Stefan Metzmacher <metze@samba.org> Autobuild-Date: Wed May 16 11:23:05 CEST 2012 on sn-devel-104
2012-05-15s3:auth: remove unused auth_server.cStefan Metzmacher1-2/+0
metze
2012-05-08krb5samba: Add smb_krb5_make_pac_checksum.Andreas Schneider1-0/+1
Signed-off-by: Simo Sorce <idra@samba.org> Autobuild-User: Simo Sorce <idra@samba.org> Autobuild-Date: Tue May 8 08:30:52 CEST 2012 on sn-devel-104
generated by cgit (git 2.34.1) at 2024-11-18 04:31:45 +0000