Age | Commit message (Collapse) | Author | Files | Lines |
|
the first
tests, and vfstest is still able to load modules. Looks like this is ok :-)
Volker
(This used to be commit c08bfdf87a1368a5d6c9a58ddb8ba379d969941d)
|
|
to void *.
Jeremy.
(This used to be commit e24361ecddef8a48a42a356775b93ce5c4027fae)
|
|
This patch is mainly based on the work of Todd Stecher
<tstecher@isilon.com> and has been reviewed by Jeremy.
I sucessfully tested and valgrinded it with MIT 1.4.3, 1.3.5, Heimdal
0.7.2 and 0.6.1rc3.
Guenther
(This used to be commit 535d03cbe8b021e9aa6d74b62d81b867c494c957)
|
|
This fixes a problem where the clock definition for clock_gettime() is
present at compile time, but is not available on the running system. In
this case, we fall back to less-preferred clocks until we find one that
we can use.
(This used to be commit fc6ed6a1aa2225ccde04c4ecaf0777dc0de4f1cb)
|
|
a more specific probe to try and eliminate old, incompatible
DMAPI implementations provided by IRIX 6.4 and AIX 4.3.
(This used to be commit aafd4db457ce8a60c628d54a3ace3b97c8885dca)
|
|
might pull in libpthread. This is quite bad, firstly because it can
cause oplock signals on Linux to go wonky, and secondly because merely
linking with pthreads can cause performance degradations due to implicit
locking requirements.
The solution is to only search for clock_gettime if --with-profiling-data
was specified. If we do end up searching for it, then we test whether
linking with librt pulled in libpthread, and we only allow the definition
for clock_gettime to succeed if libpthread was NOT linked in.
Problem reported by Thomas Bork and diagnosed by Volker Lendecke.
(This used to be commit 5712644fcc00939b9101b2e3143674d2cbdf1e12)
|
|
source code.
(This used to be commit 9559886a92b1fdd33d380bf0100dcddb12477ff2)
|
|
swapped to disc using mlock(). (patch was reviewed by Jeremy).
Guenther
(This used to be commit 206cdbb8e9a4a0900060d56510e58b85a2b8aec5)
|
|
pull it in
(This used to be commit 4f3a1c2c58a4087f3a2f72f471cbaf2bad5addfe)
|
|
(This used to be commit d19dad88155f985f113c667b6bdad5a1b25eca18)
|
|
backend still exists
(This used to be commit 7d99e05ee8f60b2b4d18405dc8be6f9ff822c3ad)
|
|
the fastest clock available on uniprocessors.
(This used to be commit d44862928206b524f826bd7c2997ab5353c0b6a0)
|
|
locating AD DC's with out own DNS SRV queries.
Testing on Linux and Solaris.
(This used to be commit cf71f88a3cdcabf99c0798ef4cf8c978397a57eb)
|
|
(This used to be commit a19d4f2bb4aa94ab40e371efbad9f17e38e3bbc4)
|
|
stack tracing support. This provides an easy way for users to provide
stack traces (hopefully it will be implemented on something other than
ia64).
(This used to be commit 0b5e07e12daa98095dae27e0a6d53fe8ec3f3700)
|
|
(This used to be commit 918f56b6de6e1297a53d88050d78d87330f7ba44)
|
|
(This used to be commit 2aad5e915c03ec932feb1bc9e1dae938fa3011a2)
|
|
kerberized pam_winbind and workstation restrictions are in effect.
The krb5 AS-REQ needs to add the host netbios-name in the address-list.
We don't get the clear NT_STATUS_INVALID_WORKSTATION code back yet from
the edata of the KRB_ERROR but the login at least fails when the local
machine is not in the workstation list on the DC.
Guenther
(This used to be commit 8b2ba11508e2730aba074d7c095291fac2a62176)
|
|
handling anymore when we remove $(LIBS) from pam_winbind again.
Also make sure to build our own copy of iniparser with -fPIC.
Guenther
(This used to be commit e32c4f6f6e090ca5babe9f131bbcb9babedcec05)
|
|
Temporary linking fix for --with-included-iniparser
(gd will do a proper fix later).
(This used to be commit 7d5adcf3a7237d130efea6cc9f6e5d28e65e2e51)
|
|
winbindd server
(This used to be commit a95d11345e76948b147bbc1f29a05c978d99a47a)
|
|
primarily intended for ia64 systems where libunwind knows more about
the different ways of walking the stack that just about anything else.
(This used to be commit 256a19d722f360dac3c8e83f5bfac453fa70db96)
|
|
and AD requirements if --without-ldap and --without-ads have been given
to configure.
(This used to be commit 1d5e4830d33906da433655ecaf87300ed874b06f)
|
|
Guenther
(This used to be commit 5ae22cf46b1077b8892a2941a2891fe7412f1b9f)
|
|
is produced when a process exits abnormally.
First, we coalesce the core dumping code so that we greatly improve our
odds of being able to produce a core file, even in the case of a memory
fault. I've removed duplicates of dump_core() and split it in two to
reduce the amount of work needed to actually do the dump.
Second, we refactor the exit_server code path to always log an explanation
and a stack trace. My goal is to always produce enough log information
for us to be able to explain any server exit, though there is a risk
that this could produce too much log information on a flaky network.
Finally, smbcontrol has gained a smbd fault injection operation to test
the changes above. This is only enabled for developer builds.
(This used to be commit 56bc02d64498eb3faf89f0c5452b9299daea8e95)
|
|
Samba3 - with some 64-bit macro madness. Attempt to fix
the broken directory handling in the *BSD-of-the-month
club.
Jeremy.
(This used to be commit fd98427f64f4206c01f16f82fadf24f5863878db)
|
|
- add DMAPI/XDSM support for AIX
- find JFS DMAPI libs on Linux when only they are available
Volker
(This used to be commit b6b72f8c6a03001ae75457c9e7a78e189bea5a3f)
|
|
HSM is interested in. Tested on both IRIX and SLES9.
(This used to be commit 514a767c57f8194547e5b708ad2573ab9a0719c6)
|
|
for module in ; do ... ; done
leads to an error (true64, solaris 8).
We now use {,UN}INSTALL_PAM_MODULES to get replaced by configure.
Therfore we don't run into the {,un}installpammodules rule if no PAM
module is requested.
Thanks to Björn Jacke for pointing to this issue.
(This used to be commit 07a70f8f861235ba4037aacb9cc835b6d18f51c3)
|
|
Nothing happens if PAM_MODULES is empty which is our default.
The default destination dir is "${LIBDIR}/security". It's possible to
overwrite the default with --with-pammodulesdir while calling configure.
(This used to be commit 7163c6860549378fa63907048c4eb34fe81835cc)
|
|
or --mandir to set them already. Till now we overwrrote a setting made
with --libdir or --mandir.
(This used to be commit 94980a15be5eae2820c340d3d33b6c9df7053b24)
|
|
- add configure tests --with-selftest-prefix=/tmp/samba-test
this is needed because the path name of unix socket can only be 108 chars long
- add configure test --with-smbtorture4-path=/home/foo/prefix/samba4/bin/smbtorture
this will be used to run samba4's smbtorture inside samba3's make test later
metze
(This used to be commit d9df1853b947c70f747ea30a353162f2985ef250)
|
|
(This used to be commit df6d69e78fb0f604a7bfc34fc9ac8f391252520d)
|
|
the POSIX interface. Note that this removes support for inherited
capabilities. This wasn't used, and probably should not be.
(This used to be commit 763f4c01488a96aec000c18bca313da37ed1df1b)
|
|
(This used to be commit 1829d22720612b0e61cec7e66d7cba46c04160b9)
|
|
called as part of the all rule (again only if pam modules are requested
by configure).
Add pam_winbind rule.
Ensure proto_exists before we build the pam modules.
Add test_pam_modules rule to test if the built pam modules have any
unresolved symbols. For test_pam_modules we use script/tests/dlopen.sh
which was written by Nalin Dahyabhai <nalin@redhat.com>. Thanks Nalin!
RedHat and SuSE use this script to test nss and pam modules since
several years.
(This used to be commit 71b2eb55adcd28f3796254ea1ce0bcee6098e712)
|
|
nscd caches so that NSS-calls can deliver accurate information.
Guenther
(This used to be commit a32a423a0e9e0d4dd21282fd528bcd3247fddbd1)
|
|
The intention is to have the resulting binaries at one place. This is
also usefull for upcoming changes to provide a test_pammodules rule.
With these changes I even got aware of
testsuite/nsswitch/pam_winbind_syms.exp But this only covers
pam_winbind.
(This used to be commit 9883957b74ddefb5293e4aef0cc2f53ee4d417ac)
|
|
over --with-kcm. No time to look after it for the moment.
Guenther
(This used to be commit 7ec2b31a8790db1466ffafeab533c11ab7ea801a)
|
|
of the FAM API.
(This used to be commit dc96ce90e50da9a82f941b0b534c0681c8477f5e)
|
|
Jeremy.
(This used to be commit 7d50966d7f783da41dc9303d7c535bc46564cf09)
|
|
to substitute rootsbindir in {,un}installbin.sh.in.
Pass $prefix as third arg to installbin/ uninstallbin as rootsbindir by
default is $prefix/sbin.
(This used to be commit 7773b8c9e0ad7bcff1312f28ca9cd17d7677e9bd)
|
|
if we use ./configure --prefix=dir && make install
Vendors might use ./configure --with-rootsbindir=/sbin && make
DESTDIR=/var/tmp/samba/ install if they use a buildroot.
Thanks to Björn Jacke for pointing me at the stderr output of the build
farm.
(This used to be commit 75c95d149a22eba4a5afedcec7ba5e2a28cccf01)
|
|
request to build mount.cifs/ umount.cifs and we're not on Linux.
(This used to be commit 23293089307a2c6166ee53e5e1e6b3135e4303ed)
|
|
system to report we're not on Linux.
(This used to be commit 1c66c4e4b82907146928396fe79d18bdaade079f)
|
|
unmount.cifs. This is controlled via CIFSMOUNT_PROGS which is set by
configure by default to yes on linux systems only. It's possible to
disable with --without-cifsmount anyhow.
Added ROOTSBINDIR to the Makefile to allow us an install to /sbin and
not $prefix/sbin. Configurable with --with-rootsbindir.
(This used to be commit a2ab4cc824995cbe172c9179edf9002d17de7f74)
|
|
with the new rules: uninstallservers uninstalldat, uninstallswat (calles
uninstallmsg), uninstallmodules, uninstallclientlib, and
uninstalllibmsrpc.
We still leave directories. We might try to remove the dirs we created
in reverse order.
The new uninstall scripts are sym links to the respective install
scripts. Inside we set mode to install or uninstall.
installservers is now used to install the servers. These are no longer
installed with installbin.
(This used to be commit 43549301b937c060742840054017b31bf3781e04)
|
|
Patch from Bjoern Jacke <bjacke-at-sernet-dot-de>.
Guenther
(This used to be commit 69fb189a6b9947069afebb15d6ee6f2f20d15171)
|
|
(This used to be commit db575c764127d7bea92fc12e5aa73c96c9ee5e2f)
|
|
(This used to be commit 380d89d148548b4658f705e900d874094a123359)
|