Age | Commit message (Collapse) | Author | Files | Lines |
|
rpcclient -S pdc -U% -c "samlogon user password"
and it should work with the schannel. Needs testing platforms
different from NT4SP6.
Volker
(This used to be commit ecd0ee4d248e750168597ccf79c389513bb0f740)
|
|
just need to get the verifiction code working - we get back a signiture from
the server, and just can't verify it yet.
This also brings the short-packet checks into common code, and breaks the
connection if the server sends a signed reply, on an established connection,
that fails the test.
This breaks our read/write code at the moment, as we need to keep a list
of outstanding packets.
(signing is not enabled by default, unless the server demands it)
Not for 3.0 till I fix the outstanding packet list.
Andrew Barlett
(This used to be commit 808d1fcf20153970d587cb631a08607beb09703a)
|
|
(This used to be commit 6df38e250af1a8e7213ad66342c71c52ce118a12)
|
|
Andrew Bartlett
(This used to be commit 05a63bd17e4c35979b3864b0969b2bfd945335d9)
|
|
Andrew Bartlett
(This used to be commit 2effcae13f9dfbff40b34d32c7fd82118c3fd096)
|
|
The intention is to allow for NTLMSSP and kerberos signing of packets, but
for now it's just what I call 'simple' signing. (aka SMB signing per the SNIA
spec)
Andrew Bartlett
(This used to be commit b9cf95c3dc04a45de71fb16e85c1bfbae50e6d8f)
|
|
(This used to be commit c2a266b7b661d319e13982bfdbc3a86e8502b8a4)
|
|
Add NTLMv2 support to our client, used when so configured ('client use NTLMv2 =
yes') and only when 'client use spengo = no'. (A new option to allow the
client and server ends to chose spnego seperatly).
NTLMv2 signing doesn't yet work, and NTLMv2 is not done for NTLMSSP yet.
Also some parinoia checks in our input parsing.
Andrew Bartlett
(This used to be commit 85e9c060eab59c7692198f14a447ad59f05af437)
|
|
different algorithm).
Andrew Bartlett
(This used to be commit e6f87c7ee5c61f03f81159a8017d31f439c4454a)
|
|
Andrew Bartlett
(This used to be commit b1c722e306533babeffeba9d8c7dcfa00e019423)
|
|
This checking allows us to connect to Microsoft servers the use SMB signing,
within a few restrictions:
- I've not get the NTLMSSP stuff going - it appears to work, but if you break
the sig - say by writing a zero in it - it still passes...
- We don't currently verfiy the server's reply
- It works against one of my test servers, but not the other...
However, it provides an excellent basis to work from. Enable it with 'client
signing' in your smb.conf.
Doc to come (tomorrow) and this is not for 3.0, till we get it complete.
The CIFS Spec is misleading - the session key (for NTLMv1 at least) is the
standard session key, ie MD4(NT#).
Thanks to jra for the early work on this.
Andrew Bartlett
(This used to be commit 1a2738937e3d80b378bd0ed33cd8d395fba2d3c3)
|
|
This patch makes Samba compile cleanly with -Wwrite-strings.
- That is, all string literals are marked as 'const'. These strings are
always read only, this just marks them as such for passing to other functions.
What is most supprising is that I didn't need to change more than a few lines of code (all
in 'net', which got a small cleanup of net.h and extern variables). The rest
is just adding a lot of 'const'.
As far as I can tell, I have not added any new warnings - apart from making all
of tdbutil.c's function const (so they warn for adding that const string to
struct).
Andrew Bartlett
(This used to be commit 92a777d0eaa4fb3a1c7835816f93c6bdd456816d)
|
|
named. Ensure we can query them.
Jeremy.
(This used to be commit 842e08e52a665ae678eea239759bb2de1a0d7b33)
|
|
(This used to be commit 095af10ff2e549b82c646df5ed20cf05352a3994)
|
|
(This used to be commit daefe52a56a7b977b8e561f8f668c42183de413b)
|
|
Jeremy.
(This used to be commit 94a5c589945ffd4719f7509c162cf994f7914312)
|
|
Jeremy.
(This used to be commit 736a7bab487d7e217eed452e2089adb6b4164ad5)
|
|
Jeremy.
(This used to be commit 983e6d137eaada5cea1235e0cf051bc314b6f9d8)
|
|
Jeremy.
(This used to be commit e2d66c5d238a057175d9316b4491ca26066f34fe)
|
|
Jeremy.
(This used to be commit abeebf33c132c4975ac5dadde57c22176ddc9fda)
|
|
(This used to be commit 40aea3fe94b68ce284e2f21e57f086212936c049)
|
|
Jeremy.
(This used to be commit 05e2aba52f9b027bbab7c65cc02fd5c83d3c61aa)
|
|
Jeremy.
(This used to be commit 3b71529c694b5b1093d99b7ef80835e72b1f8436)
|
|
- Don't print an uninitialised buffer in service.c
- Change some charcnv.c functions to take smb_ucs2_t ** instead of void **
- Update NTLMv2 code to use dynamic buffers
- Update experimental SMB signing code - still more work to do
- Move sys_getgrouplist() to SAFE_FREE() and do a DEBUG() on initgroups()
failure.
Andrew Bartlett
(This used to be commit de1964f7fa855022258a84556b266100b917444b)
|
|
(This used to be commit c00388de6cf5d0527505bfe4edfe2f0269c5a4c8)
|
|
The problem was that *all* packets were being signed, even packets before
signing was set up. (This broke the session request).
This fixes it to be an 'opt in' measure - that is, we only attempt to sign
things after we have got a valid, non-guest session setup as per the CIFS spec.
I've not tested this against an MS server, becouse my VMware is down, but
at least it doesn't break the build farm any more.
Andrew Bartlett
(This used to be commit 1dc5a8765876c1ca822e454651f8fd4a551965e9)
|
|
Jeremy.
(This used to be commit 0e7e8d44627ad9645a90e96001f8550b68b67a62)
|
|
Jeremy.
(This used to be commit c1b20db4bb4bb1ba485466f50b9795470027327c)
|
|
(only function that used it was unused, and this helps bring TNG and HEAD
closer)
Its also cleaner.
Andrew Bartlett
(This used to be commit 78f47c83332a6408a718a3dee45645935638b364)
|
|
This option was badly maintained, useless and confused our users and
distirbutors. (its SSL, therfore it must be good...)
No windows client uses this protocol without help from an SSL tunnel.
I can't see any reason why setting up a unix-side SSL wrapper would
be any more difficult than the > 10 config options this mess added
to samba in any case.
On the Samba client end, I think the LIBSMB_PROG hack should be
sufficient to start stunnel on the unix side. We might extend this
to take %i and %p (IP and port) if there is demand.
Andrew Bartlett
(This used to be commit b04561d3fd3ee732877790fb4193b20ad72a75f8)
|
|
(This used to be commit 7412890adc8f3dfddfabba545003715816e262bc)
|
|
Changed "SMB/Netbios" to "SMB/CIFS" in file header.
(This used to be commit 6a58c9bd06d0d7502a24bf5ce5a2faf0a146edfa)
|
|
(This used to be commit 9d62f25f5d3c25d71d8b87801084d42ae9b66f8c)
|
|
Jeremy.
(This used to be commit 01ff6ce4963e1daff019f2b936cef218e1c93f67)
|
|
(This used to be commit 911c57403bd116405876e73913ad73efd15f659b)
|
|
samba domain.
The PDC must be running a special authenticaion module that spits out NT errors
based on username.
Andrew Bartlett
(This used to be commit adc7a6048c13342b79b6228beafb5142c50f318d)
|
|
(This used to be commit 6d7c0f0bb4cbfdcd9a83416345432e07556f6cfc)
|
|
error in cli_receive_smb() and cli_send_smb().
(This used to be commit bedd9c821521dad46df50e8b31e4a58bb0a9a604)
|
|
Jeremy.
(This used to be commit e6afe40f85d7dbe79322c82dac735d901e7e71df)
|
|
libsmb has not been written to be setuid, with things like LIBSMB_PROG allowing
all sort of fun and games.
Andrew Bartlett
(This used to be commit 0c8e9339d8238de92e9146d04091694b62874c33)
|
|
NTLMSSP in cli_establish_connection()
What we really need to do is kill off the pwd_cache code. It is horrible,
and assumes the challenge comes in the negprot reply.
(This used to be commit 3f919b4360b3bfcc133f7d88bc5177e9d93f2db2)
|
|
loses things like username mapping. I wanted to get this in then
discuss it a bit to see how we want to split up the existing
session setup code
(This used to be commit b74fda69bf23207c26d8b2af23910d8f2eb89875)
|
|
enabled it by default if the server supports it. Let me know if this breaks anything. Choose kerberos with the -k flag to smbclient, otherwise it will use SPNEGO/NTLMSSP/NTLM
(This used to be commit 076aa97bee54d182288d9e93ae160ae22a5f7757)
|
|
activate you need to:
- install krb5 libraries
- run configure
- build smbclient
- run kinit to get a TGT
- run smbclient with the -k option to choose kerberos auth
(This used to be commit d33057585644e1337bac743e25ed7653bfb39eef)
|
|
(This used to be commit 2d0922b0eabfdc0aaf1d0797482fef47ed7fde8e)
|
|
(This used to be commit 48fc6a6cd52e01b287030fbbf0aa08a6814c5e11)
|
|
major changes include:
- added NSTATUS type
- added automatic mapping between dos and nt error codes
- changed all ERROR() calls to ERROR_DOS() and many to ERROR_NT()
these calls auto-translate to the client error code system
- got rid of the cached error code and the writebmpx code
We eventually will need to also:
- get rid of BOOL, so we don't lose error info
- replace all ERROR_DOS() calls with ERROR_NT() calls
but that is too much for one night
(This used to be commit 83d9896c1ea8be796192b51a4678c2a3b87f7518)
|
|
(This used to be commit 22b372f8a7996a19bebb8cdb411df999cffa32a4)
|
|
out the error handling into a bunch of separate functions rather than all
being handled in one big function.
Fetch error codes from the last received packet:
void cli_dos_error(struct cli_state *cli, uint8 *eclass, uint32 *num);
uint32 cli_nt_error(struct cli_state *);
Convert errors to UNIX errno values:
int cli_errno_from_dos(uint8 eclass, uint32 num);
int cli_errno_from_nt(uint32 status);
int cli_errno(struct cli_state *cli);
Detect different kinds of errors:
BOOL cli_is_dos_error(struct cli_state *cli);
BOOL cli_is_nt_error(struct cli_state *cli);
BOOL cli_is_error(struct cli_state *cli);
This also means we now support CAP_STATUS32 as we can decode and understand
NT errors instead of just DOS errors. Yay!
Ported a whole bunch of files in libsmb to use this new API instead of the
just the DOS error.
(This used to be commit 6dbdb0d813f3c7ab20b38baa1223b0b479aadec9)
|
|
(This used to be commit 4c9f010a1eef81addfea0315bef81570bc604f8a)
|