| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Always send the number of common data blocks first. This way, we
can make the protocol backwards compatible. A receiver running with
an older subprotocol can just ignore if a newer sender sends more
common data.
Add a few remarks to the marshalling function. Add two #define lines
defining the protocol subrelease number and the number of common
data blocks to the header file.
|
|
All the structures and the vfs function identifier list is required
by the receiver. It's therefore very handy to have this in an extra
header file.
|
|
This program allows the administrator to enable or disable AES
encryption when using vfs_smb_traffic_analyzer. It also generates new
keys, stores them to a file, so that the file can be reused on another
client or server.
|
|
First try. This runs on 16 bytes long AES block size, and enlarges the
data block with 16 bytes, to make sure all bytes are in. The added
bytes are filled with '.'. It then creates a header featuring the new
length to be send, and finally sends the data block, then returns.
This code is untested, as creating the receiver will be my next step.
To simplify traffic_analyzer's code, this code should run as a function.
It's on the do-to-list.
|
|
Since we need to care for the SID too, do the anonymization in the
marshalling function and anonymize both the username and the SID.
Remove the 'A' status flag from the header definition. A listener
could see from the unencrypted header if the module is anonymizing
or not, which is certainly not wanted.
|
|
|
|
I don't think it should have it's place the man page, because this is
developer information.
|
|
Since the header block of the protocol contains the number of bytes to
come, we always send the header itself unmodified.
If we compress or crypt the data we are about to send, the length of the
data to send may change. Therefore, we no longer create the header in
smb_traffic_analyzer_create_string, but shortly before we send the data.
For both cases, encryption and normal, we create our own header, and
send it before the actual data.
In case of protocol v1, we don't need to create an extra header.
Just send the data, and return from the function.
Change a debug message to say that the header for crypted data has
been created.
Add a status flags consisting of 6 bytes to the header. Their function
will be descriped in one of the next patches, which is descriping
the header in a longer comment.
When anonymization and/or encryption is used, set the flags accordingly.
|
|
data.
|
|
|
|
align the switch and it's case statements in the same column.
This saves us one indentation level.
|
|
typedefs are evil according to the linux kernel coding
styleguide.
|
|
|
|
|
|
|
|
sending over the network in protocol v2. To be able to do this, we create a new va-list function that is creating the buffer to send. Also it makes it easier for the receiver to parse the data; it sends an initial header containing the full length of the buffer to be send. For the individual strings, it sends sub headers containing the length of the upcoming substring to be send. With the header-data-header-data [..] structure we don't need to quote the sub strings finally enabling having all possible character sets in filenames etc..
In the sending function, implement mkdir to actually send it's data
for testing.
|
|
over to the send function, which then casts the void pointer to the struct required by looking at the id. This allows us to return different result data depending on the VFS function that is running. Make the protocol v1 sender compatible to this. Adapt the existing VFS functions to use the new data structures. Make use of the new functionality and extend the mkdir VFS logger function to return the creation mode additionally.
|
|
From Holger:
Make smb_traffic_analyzer differ the protocol versions to enable the development of version 2 of the protocol. To do this, a new parameter "protocol_version" has been introduced, which can be set to "V1", "V2", or nothing. If protocol_version is not set, V1 will be chosen automatically.
Created an enum for identifying VFS functions in the upcoming protocol v2. Converted the existing VFS functions to use the identifier, and set the read/write bool used in protocol v1 accordingly, also ignore any other VFS functions except read/write/pread/pwrite in v1. Added a first new VFS function for mkdir, which I use for testing and implementing both the sender and receiver for v2.
|
|
make access decisions.
Jeremy.
|
|
"current_user.XXX"
Will allow me to replace them with accessor functions.
Jeremy.
|
|
struct current_user current_user;"."
As requested by Volker, split this into smaller commits.
Jeremy.
|
|
get_current_nttok(conn)
Centralize the root check into smb1_file_se_access_check()
so this is used by modules/vfs_acl_common.c also.
Jeremy.
|
|
Use accessor functions to get to this value. Tidies up much of
the user context code. Volker, please look at the changes in smbd/uid.c
to familiarize yourself with these changes as I think they make the
logic in there cleaner.
Cause smbd/posix_acls.c code to look at current user context, not
stored context on the conn struct - allows correct use of these
function calls under a become_root()/unbecome_root() pair.
Jeremy.
|
|
|
|
this module adds optional server-side support for limited rename operations
beyond filesystem boundaries, which was the previously the default.
|
|
cross-device rename support has some major limitations:
- on huge files clients will timeout or hang
- ACLs and EA information is not retained
Usually a client will have to handle this. A Windows Server with a reparse
point will also just return NT_STATUS_NOT_SAME_DEVICE. We will now by default
do the same.
I will add a vfs module which will restore the old cross-device renames.
|
|
Ensure we don't use any of the create_options for Samba private
use. Add a new parameter to the VFS_CREATE call (private_flags)
which is only used internally. Renumber NTCREATEX_OPTIONS_PRIVATE_DENY_DOS
and NTCREATEX_OPTIONS_PRIVATE_DENY_FCB to match the S4 code).
Rev. the VFS interface to version 28.
Jeremy.
|
|
fixes #7197. Thanks to William Jojo for the correction.
|
|
Supports negated arguments in configuration like:
full_audit:success = all !readdir !telldir !closedir
Update the manpage accordingly.
Part of BSO#4025
|
|
Shuttle-reviewed by jra :)
Guenther
|
|
|
|
check !
Jeremy.
|
|
(cherry picked from commit a13b507f2d8be7f90c8872094cd0732926a6fcbb)
|
|
|
|
As pointed out by bj@sernet.de, the rmdir module initializer was
duplicated. Fix this properly.
Jeremy.
|
|
Thanks, Volker for the hint - acl_type is a macro on Tru64. Renamed it
to acltype. This fixes #7103.
|
|
Check for NULL on opendir, correctly call next rmdir.
Jeremy.
|
|
|
|
|
|
Fix inspired by idea from Eric Horst <erich@cac.washington.edu>.
Jeremy.
|
|
|
|
|
|
|
|
|
|
does not have delete rights fails even if the delete right is set on the object
Suggested by Volker. Reduce the surface area of the
become_root() unbecome_root() code to reduce the chance
of errors.
Jeremy.
|
|
Fix some issues with handling names ending in '/'.
|
|
|
|
setting socket name.
Jeremy.
|
|
rights fails even if the delete right is set on the object.
Final fix for the vfs_acl_xattr and vfs_acl_tdb code.
Ensure we can delete a file even if the underlying POSIX
permissions don't allow it, if the Windows permissions do.
Jeremy.
|
|
|
