summaryrefslogtreecommitdiff
path: root/source3/param
AgeCommit message (Collapse)AuthorFilesLines
2008-03-10loadparm: fix init_globals() to re-init all options event when called 2nd time.Michael Adam1-12/+22
Up to the globals had only been fully reset when init_globals() was called for the first time. But a full restart is needed for use with "config backend = registry". (And should be with "config file = ...", but in this case the restart is outsourced to the daemons.) This left some options (like e.g. "realm") set to values that were set in smb.conf before the occurence of "config backend = registry". Now this misbehaviour is fixed with this change. Michael (This used to be commit f12259d9c4c34b99f5b655cab4b210159cb0e188)
2008-03-10loadparm: replace typedef struct {} global/service by struct global/struct ↵Michael Adam1-29/+29
service. Michael (This used to be commit ab70e781b2d4cc7f8a7f6cf95825f8412d9be2ca)
2008-03-10loadparm: fix whitespaces in global and service parameter structs.Michael Adam1-7/+6
Michael (This used to be commit 10ab0681e60e3b91958639a2b0ad359440076c4a)
2008-03-10loadparm: fix spacing in parm_table (training spaces and empty lines).Michael Adam1-40/+19
Michael (This used to be commit 91aab823fc6ec4c38e3461aae57bec0c6a567150)
2008-03-10loadparm: Reformat the parm table to use named initializers.Michael Adam1-412/+3524
This makes each entry in the parm table much more comprehensible at first glance (to me). On the other hand, roughly 9 lines are used instead of one for each entry which makes the overall list less clearly laid out, one might argue. But we have 400+ lines of parameter descriptions anyways... Michael (This used to be commit 869a17f1a9ba45d30211c230673c6f4482876b29)
2008-03-06Eliminate global variable in_client and a plethora of extern declarations.Derrell Lipman2-5/+24
Derrell (This used to be commit b7f34e7ef2907b498a0645ce68f2773ed7d60cdc)
2008-03-06Fix lp_load with an empty registry and "config backend = registry". Michael, ↵Günther Deschner1-0/+7
please check. Guenther (This used to be commit d9f4060c660da0ad671e061b123df71d109d51b9)
2008-02-29Rename the 'hidden' variable to 'administrative share'.Andreas Schneider1-5/+5
(This used to be commit eff3d3bad5a8860b99375cc0be9dc24f3679e416)
2008-02-28Remove my changeJeremy Allison1-6/+7
(This used to be commit 7bf4216644187549697caace4a2a48803b57fa5a)
2008-02-28Fix debug %lu message.Jeremy Allison1-2/+2
Jeremy. (This used to be commit 644a3be37a6760c9e25ac1b286c7c225096e8b0d)
2008-02-26Add variable to define if a share should be hidden.Andreas Schneider1-0/+5
If you create a share on a Windows machine called foo$ then this share is of the type STYPE_DISKTREE. So it is possible to administrate this kind of share. Tested on Windows NT and 2003. In samba we assume that if a share with a $ at the end must be of the type STYPE_DISKTREE_HIDDEN. This is wrong, so we need a variable in the config to define if the share should be hidden or not. (This used to be commit a3da677bf0faed56e6731ee96708a7847a61d118)
2008-02-25Fix some warningsVolker Lendecke1-2/+1
warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result (This used to be commit ad37b7b0aee265a3e4d8b7552610f4b9a105434d)
2008-02-19Use linbet_conf code in loadparm's registry handling.Michael Adam1-223/+38
This replaces the original hand-written tdb code, now that the linking dependencies have been significantly reduced. Michael (This used to be commit d08a3a195718725228bbafa61fd4f0be8aafb43f)
2008-02-15Rename registry_init_regdb() to registry_init_smbconf().Michael Adam1-1/+1
That's what it actually is. Michael (This used to be commit 9d3c27f55726dbdce41fcf71c8bc1a7829340268)
2008-02-06Add support for LDAP debug output in Samba log file.Michael Adam1-0/+19
Logging of the ldap libraries appears with a [LDAP] prefix inside the samba logs. This is controlled by two new parameters: * "ldap debug level" sets the debug level of the ldap libraries. It is the bit-field as understood by the openldap server. * "ldap debug threshold" is the samba debug level at which ldap logging appears inside the samba logs. This probably needs some configure tests since it makes use of the LBER_OPT_LOG_PRINT_FN option to redirect the debug output of the ldap libraries. Michael (This used to be commit 15c25990bd0bfa3145ab3c26d2bdda72993d005c)
2008-02-04str_list_free is not needed anymoreVolker Lendecke1-12/+13
(This used to be commit feddc1447d585fd108d22a36bccc576fa81197ef)
2008-02-04Always pass a TALLOC_CTX to str_list_make and str_list_copyVolker Lendecke1-7/+10
(This used to be commit e2c9fc4cf5f0ff725330fa44f53782db65fca37e)
2008-01-23strtok -> strtok_rVolker Lendecke1-1/+3
(This used to be commit fd34ce437057bb34cdc37f4b066e424000d36789)
2008-01-20Do an explicit init_globals() when restarting for "config backend = registry".Michael Adam1-0/+1
Michael (This used to be commit 487c43f9284598a3c60b06fc60e5c50844e11b87)
2008-01-16Revert "default to tdbsam instead of smbpasswd"Volker Lendecke1-1/+1
This reverts commit ab8ff39fd51929aae2f4088ca5b1d67e5cb7099e. (This used to be commit 5838a9f556f151dc7c1773dcdc598b8ba79fca44)
2008-01-16default to tdbsam instead of smbpasswdVolker Lendecke1-1/+1
(This used to be commit ab8ff39fd51929aae2f4088ca5b1d67e5cb7099e)
2008-01-16Add my (C) to loadparm.c.Michael Adam1-0/+1
I think now that I have changed some substantial logic, I should confess.... :-) Michael (This used to be commit 704ac0ba49134d14dc00769b1cf2d9f55657bdfb)
2008-01-16Remove special semantics of "include = registry" from loadparm.cMichael Adam1-29/+0
This is now replaced by "config backend = registry". Michael (This used to be commit 56801810253ae870437f694947f58c27661cef9b)
2008-01-16Add utility function lp_config_backend_is_registry().Michael Adam1-0/+8
So external callers can determine if we are running on registry config without knowing the internals. Michael (This used to be commit d8a7c3ec8e2bd548509178f138d00a3b57119d10)
2008-01-16Initialise Globals.ConfigBackend from global var config_backend.Michael Adam1-5/+11
and use lp_config_backend() instead of config_backend. Michael (This used to be commit 9f69efe954cde6c6cce4283ba35a553ca980c347)
2008-01-16Add config parameter "config backend = registry".Michael Adam1-19/+63
This adds a new config parameter "config backend" that can have values "file" (default) and "registry". When lp_load() encounters a "config backend = registry", then all config read up to that point is discarded and globals are read from registry. This is done in suche a way that as with "config file", there is no way back to non-registry config during the lifetime of a process: The file_list_changed mechanism does not look at files anymore once config backend is set to registry. This is modelled after the behaviour of the "config file" option. Note that only the global section is read by lp_load(). The shares are handled by the registry shares mechanism, thus allowing for a smaller memory footprint since share definitions are read on demand. This new parameter is intended as a substitute of the previously installed special semantics of "include = registry" which allows for messed up mixed configurations. This parameter (which has not yet been released) will vanish next. Michael (This used to be commit 77b33cf34c2aec6673dfab3962733a60a60d126a)
2008-01-16Add "MSDFS options" separator to parm_table.Michael Adam1-0/+2
Michael (This used to be commit a103509a467bf6a93fbb21ec5e64456c5f086d6c)
2008-01-16Re-order an option block in parm_table to re-unite the misc options.Michael Adam1-3/+3
Michael (This used to be commit 9e11768256623636e69eda67b3bb888426f9ab84)
2008-01-09Reduce stat cache size defaultVolker Lendecke1-1/+1
Now that we have a LRU scheme for the stat cache we can live with a lot less (This used to be commit 9e736aab07b91744d4c14a55f6f7c55f51dd80f6)
2008-01-09Change registry_create_admin_token() to return NTSTATUS.Michael Adam1-3/+4
Michael (This used to be commit 9cd30fb25c42e79946b5140994d0bf2ef4c62f90)
2008-01-09Extend a comment.Michael Adam1-1/+3
Michael (This used to be commit 081435250709af734ec1e49e2539b091f2d92dfb)
2008-01-04Refactor the crypto code after a very helpful conversationJeremy Allison1-3/+2
with Volker. Mostly making sure we have data on the incoming packet type, not stored in the smb header. Jeremy. (This used to be commit c4e5a505043965eec77b5bb9bc60957e8f3b97c8)
2007-12-27Add "smb encrypt" parameter. Can be set to "no, yes, required".Jeremy Allison1-0/+4
Currently if set required this is not enforced. I'll be adding that soon. Jeremy. (This used to be commit df7e447623ac03d81bec384f5cfe83c3976cf7b2)
2007-12-26Add SMB encryption. Still fixing client decrypt butJeremy Allison1-2/+5
negotiation works. Jeremy. (This used to be commit d78045601af787731f0737b8627450018902b104)
2007-12-21Fix a C++ warningVolker Lendecke1-1/+1
(This used to be commit c31c7e3e24875ce75bc18f0ad7529320eab8e50a)
2007-12-19Remove Get_Pwnam and its associated static variableVolker Lendecke1-1/+5
All callers are replaced by Get_Pwnam_alloc (This used to be commit 735f59315497113aebadcf9ad387e3dbfffa284a)
2007-12-18Add a in-memory cacheVolker Lendecke1-3/+4
This is a more general API that caches data with a LRU scheme. See include/cache.h. No comments yet, I'm still working on it. But Jeremy has given me a hint in one of his checkins that he would like to make use of this now. The idea is that we get rid of all our silly little caches and merge them all into one cache that we can then very easily trim, for example even with a smbcontrol message if someone decides memory is tight. The main user is the stat cache, this patch also converts the getwd cache. More caches to come. (This used to be commit 7a911b35713538d82001a3c9f34152e293fe1943)
2007-12-12Add lp_include_registry_globals().Günther Deschner1-0/+5
Guenther (This used to be commit d30b945e99390761e405492e40c90e84da4fe482)
2007-12-10Remove two completely unnecessary globalsVolker Lendecke1-61/+51
Can someone look over this? To me it looks as if bufr was only made static to save a malloc during an included smb.conf file. I think that's pretty much pointless. (This used to be commit 068e8de72ceb49ef2e02cca1913b6d2197bab5e0)
2007-12-10Remove the char[1024] strings from dynconfig. ReplaceJeremy Allison1-5/+5
them with malloc'ing accessor functions. Should save a lot of static space :-). Jeremy. (This used to be commit 52dc5eaef2106015b3a8b659e818bdb15ad94b05)
2007-12-10use dbwrap_rbt in loadparm.cVolker Lendecke1-4/+2
(This used to be commit e81629339589e2e7f464b3dca55730ff2d0877e4)
2007-12-10Convert ServiceHash to dbwrapVolker Lendecke1-26/+47
(This used to be commit 66bd6837b593a7127bd5098afc990d3fb7a5a35a)
2007-12-07We don't need P_GSTRING or P_UGSTRING anymore.Jeremy Allison1-55/+0
Jeremy. (This used to be commit 78dc75600099b5b3b5a8ecffec747a227ff51d70)
2007-12-07Don't build rpctorture anymore - not maintained. Just remove.Jeremy Allison1-2/+18
Remove all vestiges of pstring (except for smbctool as noted in previous commit). Jeremy (This used to be commit 4c32a22ac50ada3275d2ffba3c1aa08bee7d1549)
2007-12-05Remove some globalsVolker Lendecke1-2/+5
(This used to be commit 31d0a846db08d845e6cdfd85def4ac1c34031e02)
2007-11-30Move param helper routines to one place.Günther Deschner1-0/+50
Guenther (This used to be commit 6bf2c8038c4bc7a52b7f260209ade0bdeb95c685)
2007-11-27Save one extra strdup per lp_string. Use talloc_sub_basic()Jeremy Allison1-12/+14
directly. Jeremy. (This used to be commit f1e401ef5c89ecf12921b7adb228da438521a693)
2007-11-15More pstring removal. This one was tricky. I had to addJeremy Allison1-1/+1
one horror (pstring_clean_name()) which will have to remain until I've removed all pstrings from the client code. Jeremy. (This used to be commit 1ea3ac80146b83c2522b69e7747c823366a2b47d)
2007-11-13Remove pstring from param/Jeremy Allison1-94/+152
This was a little tricky..... I'll watch the build farm. Jeremy. (This used to be commit d6e2519c67fd015e1089021769de04085fd90894)
2007-11-09Remove the silly "user_socket_options" global variableVolker Lendecke1-3/+3
This is better done with a 'lp_do_parameter(-1, "socket options", ..); (This used to be commit 814bed029efa391e664ac432d0d68dfeab26381f)
generated by cgit (git 2.34.1) at 2024-12-21 12:07:48 +0000