summaryrefslogtreecommitdiff
path: root/source3/printing
AgeCommit message (Collapse)AuthorFilesLines
2009-08-10s3-spoolss: remove device mode defines from nt_printing.h.Günther Deschner1-12/+17
Guenther
2009-08-07s3:smbd: conn_free_internal() can be static nowStefan Metzmacher1-3/+3
metze
2009-07-24s3: Convert a few callers of unix_convert() over to filename_convert()Tim Prouty1-5/+23
This patch also changes the unix convert flags to make sure the correct semantics are preservered for allowing/disallowing wildcards in the last component of the path.
2009-07-20s3: Finish plumbing the fsp->fsp_name smb_fname conversion through the modules.Tim Prouty1-2/+8
2009-06-26s3-vlp: drastically shrink size and dependencies of the virtual line printer.Günther Deschner1-11/+8
This gets vlp from 13M down to 214K on my box. Guenther
2009-06-24s3-printing: eliminate another non sec_initial_uid using security check.Günther Deschner1-1/+1
Guenther
2009-06-22s3: forward MSG_DEBUG from smbd parent to all childrenAravind Srinivasan1-0/+19
Before 3.3, an smbcontrol debug message sent to the target "smbd" would actually be sent to all running processes including nmbd and winbindd. This behavior was changed in 3.3 so that the "smbd" target would only send a message to the process found in smbd.pid, while the "all" target would send a message to all processes. The ability to set the debug level of all processes within a single daemon, without specifying each pid is quite useful. This was implemented in winbindd in 065760ed. This patch does the same thing for smbd. Upon receiving a MSG_DEBUG the parent smbd will rebroadcast it to all of its children. The printing process has been added to the list of smbd child processes, and we now always track the number of smbd children regardless of the "max smbd processes" setting.
2009-06-19Fix coverity #740. Resource leak in error paths. We shouldJeremy Allison1-3/+2
always return queue here as the caller will free. Jeremy.
2009-06-15Do a correct TALLOC_FREE in an error caseVolker Lendecke1-1/+4
2009-06-12s3: Plumb smb_filename through SMB_VFS_CREATE_FILETim Prouty1-47/+27
2009-06-10s3: Prepare the first set of SMB_VFS_CREATE_FILE callers to take an ↵Tim Prouty1-53/+95
smb_filename struct Some of the callers required minimal changes, while others (copy_internals) required significant changes. The task is simplified a little bit because we are able to do operations and checks on the base_name when a stream isn't used. This patch should cause no functional changes. Volker, Jeremy: Please check
2009-06-10s3: Remove extraneous calls to unix_convertTim Prouty1-6/+0
Not only are these unnecessary in spirit because unlink_internals calls unix_convert, but in practice the return value is simply being ignored right now.
2009-05-27s3: Allow child processes to exit gracefully if we are out of fdsMarc VanHeyningen2-4/+5
When we run out of file descriptors for some reason, every new connection forks a child that immediately panics causing smbd to coredump. This seems unnecessarily harsh; with this code change we now catch that error and merely log a message about it and exit without the core dump. Signed-off-by: Tim Prouty <tprouty@samba.org>
2009-05-26Introduce "struct stat_ex" as a replacement for SMB_STRUCT_STATVolker Lendecke3-4/+4
This patch introduces struct stat_ex { dev_t st_ex_dev; ino_t st_ex_ino; mode_t st_ex_mode; nlink_t st_ex_nlink; uid_t st_ex_uid; gid_t st_ex_gid; dev_t st_ex_rdev; off_t st_ex_size; struct timespec st_ex_atime; struct timespec st_ex_mtime; struct timespec st_ex_ctime; struct timespec st_ex_btime; /* birthtime */ blksize_t st_ex_blksize; blkcnt_t st_ex_blocks; }; typedef struct stat_ex SMB_STRUCT_STAT; It is really large because due to the friendly libc headers playing macro tricks with fields like st_ino, so I renamed them to st_ex_xxx. Why this change? To support birthtime, we already have quite a few #ifdef's at places where it does not really belong. With a stat struct that we control, we can consolidate the nanosecond timestamps and the birthtime deep in the VFS stat calls. At this moment it is triggered by a request to support the birthtime field for GPFS. GPFS does not extend the system level struct stat, but instead has a separate call that gets us the additional information beyond posix. Without being able to do that within the VFS stat calls, that support would have to be scattered around the main smbd code. It will very likely break all the onefs modules, but I think the changes will be reasonably easy to do.
2009-05-20s3: Change unix_convert (and its callers) to use struct smb_filenameTim Prouty1-1/+16
This is the first of a series of patches that change path based operations to operate on a struct smb_filename instead of a char *. This same concept already exists in source4. My goals for this series of patches are to eventually: 1) Solve the stream vs. posix filename that contains a colon ambiguity that currently exists. 2) Make unix_convert the only function that parses the stream name. 3) Clean up the unix_convert API. 4) Change all path based vfs operation to take a struct smb_filename. 5) Make is_ntfs_stream_name() a constant operation that can simply check the state of struct smb_filename rather than re-parse the filename. 6) Eliminate the need for split_ntfs_stream_name() to exist. My strategy is to start from the inside at unix_convert() and work my way out through the vfs layer, call by call. This first patch does just that, by changing unix_convert and all of its callers to operate on struct smb_filename. Since this is such a large change, I plan on pushing the patches in phases, where each phase keeps full compatibility and passes make test. The API of unix_convert has been simplified from: NTSTATUS unix_convert(TALLOC_CTX *ctx, connection_struct *conn, const char *orig_path, bool allow_wcard_last_component, char **pp_conv_path, char **pp_saved_last_component, SMB_STRUCT_STAT *pst) to: NTSTATUS unix_convert(TALLOC_CTX *ctx, connection_struct *conn, const char *orig_path, struct smb_filename *smb_fname, uint32_t ucf_flags) Currently the smb_filename struct looks like: struct smb_filename { char *base_name; char *stream_name; char *original_lcomp; SMB_STRUCT_STAT st; }; One key point here is the decision to break up the base_name and stream_name. I have introduced a helper function called get_full_smb_filename() that takes an smb_filename struct and allocates the full_name. I changed the callers of unix_convert() to subsequently call get_full_smb_filename() for the time being, but I plan to eventually eliminate get_full_smb_filename().
2009-05-13s3-printing: no need to define struct table_node 4 times.Günther Deschner1-7/+1
Guenther
2009-05-13s3-spoolss: move SPL_ARCH_X defines to IDL.Günther Deschner1-8/+0
Guenther
2009-05-12s3-printing: Fix vlp testprinter application.Günther Deschner1-24/+23
Jeremy, we cannot just access cache_path() here without calling lp_load and friends as well as parsing configfile from the commandline in order to make "make test/selftest" find the correct conffile with path, etc. I just changed it to pass the target tdbfilename as an argument, ok ? Guenther
2009-05-11Hopefully fix the buildfarm. Add some debug level 10 messagesJeremy Allison2-5/+20
I used to track down the vlp problem, change the vlp test printer not to use a static path of /tmp/vlp.tdb for the virtual print database (as this will eventually fill up). Cause it to use a virtual print database inside the cachepath. Jeremy.
2009-05-06s3-printing: simplify print_queue helper functions and return WERROR.Günther Deschner1-17/+10
Guenther
2009-04-30s3-printing: rework move_driver_file_to_download_area() a bit for clarity.Günther Deschner1-32/+40
Guenther
2009-04-30s3-printing: use move_driver_file_to_download_area() to avoid code duplication.Günther Deschner1-144/+54
Guenther
2009-04-30s3-printing: add move_driver_file_to_download_area().Günther Deschner1-0/+40
Guenther
2009-04-27s3:nt_printing: fix a comment typoMichael Adam1-1/+1
Michael
2009-04-27s3:registry: replace typedef REGISTRY_VALUE by struct regval_blobMichael Adam1-4/+4
Michael
2009-04-27s3:registry: replace typedef REGVAL_CTR by struct regval_ctr.Michael Adam1-9/+9
This paves the way for hiding the typedef and the implementation from the surface. Michael
2009-04-20Remove smb_mkstemp() - libreplace will now provide a secure mkstemp() ifJelmer Vernooij1-1/+1
the system one is broken.
2009-04-20s3-printing: use ARRAY_SIZE() macro in forms functions.Günther Deschner1-6/+5
Guenther
2009-04-20s3-printing: use sec_initial_uid() instead "0" in print_access_check().Günther Deschner1-1/+1
Another babystep in order to make us pass RPC-SPOOLSS. Guenther
2009-04-14s3-spoolss: remove unused dup_nt_devicemode().Günther Deschner1-28/+0
Guenther
2009-04-07s3-libads: avoid NULL talloc context with ads_get_dn().Günther Deschner1-1/+1
Guenther
2009-04-06s3:libads Make ads_get_dn() take a talloc contextAndrew Bartlett1-2/+2
Also remove ads_memfree(), which was only ever a wrapper around SAFE_FREE, used only to free the DN from ads_get_ds(). This actually makes libgpo more consistant, as it mixed a talloc and a malloc based string on the same element. Andrew Bartlett Signed-off-by: Günther Deschner <gd@samba.org>
2009-04-06s3:printing Convert nt_printer_publish_ads() to use talloc betterAndrew Bartlett1-26/+18
In particular, this removes one more user of pull_utf8_allocate() Andrew Bartlett Signed-off-by: Günther Deschner <gd@samba.org>
2009-03-30s3/cups: add encryption supportBjörn Jacke1-0/+5
2009-03-20s3-spoolss: apply some const in spoolss server.Günther Deschner1-4/+7
Guenther
2009-03-18s3-spoolss: use printer and job notify enums provided by idl.Günther Deschner1-15/+15
Guenther
2009-03-18s3-printing: use marshall/unmarshall_sec_desc_buf in sec_desc_upg_fn().Günther Deschner1-26/+5
Guenther
2009-03-18s3:printing: use tevent_loop_wait() instead of manual loopingStefan Metzmacher1-50/+6
metze
2009-03-18s3:printing: use a fd event to monitor the pipe to the parentStefan Metzmacher1-3/+23
metze
2009-03-17s3-spoolss: rename temporary convert_devicemode_new function.Günther Deschner1-12/+13
Guenther
2009-03-17s3-spoolss: remove obsolete get_a_builtin_ntform.Günther Deschner1-7/+0
Guenther
2009-03-12s3-spoolss: make jobname a const char * in print_job_start().Günther Deschner1-1/+1
Guenther
2009-03-01Only copy sharename up from rap_to_pjobidVolker Lendecke2-3/+4
Why?? :-) Another one of the little micro-optimizations that I just came across: If you allocate a variable in a sub-block like the "fstring sharename" in write_file(), gcc even with -O3 will allocate this variable unconditionally on the stack at the beginning of the routine. So with eliminating this fstring we cut 256 bytes of stack in a very hot code path writing to a file. It might make us a bit more cache-friendly. This would probably not be worth a second look if it involved larger code changes, but this one was just too simple to let it pass :-)
2009-02-27s3-spoolss: use DSPRINT flags instead of SPOOLS_DS flags.Günther Deschner1-6/+6
Guenther
2009-02-26s3: fix the build JOB_STATUS_BLOCKED -> JOB_STATUS_BLOCKED_DEVQMichael Adam1-1/+1
Günther, please check... Michael
2009-02-25Fix some NetBSD warnings.Jeremy Allison1-2/+4
Jeremy.
2009-02-24s3-spoolss: use marshall/unmarshall_sec_desc_buf in nt_printing_setsec/getsec.Günther Deschner1-45/+35
Guenther
2009-02-24s3-spoolss: fix notify_printer_status_byname.Günther Deschner1-1/+3
This took me almost a week to find, so here a little longer explanation: When a windows client registers printer *status* change notifies using spoolss_RemoteFindFirstChangeNotify, it registers them to a print server handle, not a printer handle. We were then correctly monitoring the printer status changes but were sending out the spoolss_RouterReplyPrinterEx via the back-channel connection with job_id set to 0 (which we only may do for monitored printer change status notifies on printer handlers, not print server handles). Windows was then showing a new empty dummy printer icon in the explorer as it cannot route the notify event to the approriate local handle. It also discarded the content of the notify event message of course. With this, printer change notify for pausing, resuming and purging printers nicely works again here. Jerry, Tim and all other printing gurus, please check. Guenther
2009-02-19Fix printf warnings found on systems where time_t <> long int.Jeremy Allison1-1/+1
Jeremy.
2009-02-18S3: Stop creating SMBD cores when failing to create a pipe.todd stecher1-3/+7
This was uncovered when the MAX FD limit was hit, causing an instant core and invoking error reporting. This fix causes SMBD to exit, but without building a core.