summaryrefslogtreecommitdiff
path: root/source3/printing
AgeCommit message (Collapse)AuthorFilesLines
2011-06-20tdb_compat: Higher level API fixes.Rusty Russell2-8/+8
My previous patches fixed up all direct TDB callers, but there are a few utility functions and the db_context functions which are still using the old -1 / 0 return codes. It's clearer to fix up all the callers of these too, so everywhere is consistent: non-zero means an error. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-06-20tdb_compat: use tdb_open_compat.Rusty Russell1-2/+3
This is a helper for the common case of opening a tdb with a logging function, but it doesn't do all the work, since TDB1 and TDB2's log functions are different types. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-06-20ldb: replace 'struct TDB_DATA' with 'TDB_DATA'Rusty Russell1-1/+1
The typedef is TDB2 compatible, the struct isn't. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-06-20tdb_compat: use tdb_errorstr_compat()Rusty Russell1-6/+6
Since TDB2 functions return the error directly, tdb_errorstr() taken an error code, not the tdb as it does in TDB1. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-06-20tdb_compat: use tdb_firstkey_compat/tdb_nextkey_compat everywhere.Rusty Russell2-6/+6
Note that tdb_nextkey_compat frees the old key for us. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-06-20tdb_traverse/tdb_traverse_read: check returns for negative, not -1.Rusty Russell1-2/+2
TDB2 returns a negative error number on failure. This is compatible if we always check for < 0 instead of == -1. Also, there's no tdb_traverse_read in TDB2: we don't try to make traverse reliable any more, so there are no write locks anyway. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-06-20tdb_chainlock: check returns for 0, not -1.Rusty Russell1-1/+1
TDB2 returns a negative error number on failure. This is compatible if we always check for != 0 instead of == -1. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-06-20tdb_store: check returns for 0, not -1.Rusty Russell2-6/+6
TDB2 returns a negative error number on failure. This is compatible if we always check for != 0 instead of == -1. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-06-20tdb_fetch_compat: use instead of tdb_fetch.Rusty Russell3-16/+16
This is a noop for tdb1. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-06-10source3/printing/pcap.h: fix licence/copyrightGünther Deschner1-0/+15
Guenther
2011-06-10source3/printing/load.h: fix licence/copyrightGünther Deschner1-0/+24
Guenther
2011-06-09s3-param Remove special case for global_myname(), rename to lp_netbios_name()Andrew Bartlett2-4/+4
There is no reason this can't be a normal constant string in the loadparm system, now that we have lp_set_cmdline() to handle overrides correctly. Andrew Bartlett
2011-06-09s3-talloc Change TALLOC_MEMDUP() to talloc_memdup()Andrew Bartlett1-2/+2
Using the standard macro makes it easier to move code into common, as TALLOC_MEMDUP isn't standard talloc.
2011-06-09s3-talloc Change TALLOC_ZERO_P() to talloc_zero()Andrew Bartlett1-1/+1
Using the standard macro makes it easier to move code into common, as TALLOC_ZERO_P isn't standard talloc.
2011-06-09s3-talloc Change TALLOC_P() to talloc()Andrew Bartlett2-5/+5
Using the standard macro makes it easier to move code into common, as TALLOC_P isn't standard talloc.
2011-06-09s3-talloc Change TALLOC_ARRAY() to talloc_array()Andrew Bartlett1-1/+1
Using the standard macro makes it easier to move code into common, as TALLOC_ARRAY isn't standard talloc.
2011-06-01Change sys_getcd() to take no arguments and always return malloc'ed memory ↵Jeremy Allison1-8/+8
(or NULL). Part of the efforts to remove PATH_MAX on modern systems.
2011-06-01s3: fix more -Wunused-but-set-variable build warnings.Günther Deschner1-2/+1
Guenther Autobuild-User: Günther Deschner <gd@samba.org> Autobuild-Date: Wed Jun 1 00:29:30 CEST 2011 on sn-devel-104
2011-05-30s3: fix some -Wunused-but-set-variable build warnings.Günther Deschner1-4/+0
Guenther Autobuild-User: Günther Deschner <gd@samba.org> Autobuild-Date: Mon May 30 17:41:18 CEST 2011 on sn-devel-104
2011-05-20Fix bug #8157 - std_pcap_cache_reload() fails to parse a cups printcap file ↵Jeremy Allison1-8/+5
correctly. The parsing code made some strange assumptions about what is a printer name, and what is a comment. Autobuild-User: Jeremy Allison <jra@samba.org> Autobuild-Date: Fri May 20 22:52:23 CEST 2011 on sn-devel-104
2011-05-18s3-lib Replace StrCaseCmp() with strcasecmp_m()Andrew Bartlett1-1/+1
strcasecmp_m() never needs to call to talloc, and via next_codepoint() still has an ASCII fast-path bypassing iconv() calls. Andrew Bartlett
2011-05-16s3-printing: remove cups_pull_comment_location from header fileDavid Disseldorp1-4/+0
Signed-off-by: Günther Deschner <gd@samba.org> Autobuild-User: Günther Deschner <gd@samba.org> Autobuild-Date: Mon May 16 16:03:57 CEST 2011 on sn-devel-104
2011-05-16s3-printing: Remove obsolete and unused cups_pull_comment_location().Andreas Schneider1-157/+0
Signed-off-by: Günther Deschner <gd@samba.org>
2011-05-16s3-printing: Get the location info from cups.Günther Deschner9-30/+80
Signed-off-by: Günther Deschner <gd@samba.org>
2011-05-13rpc_server: Always use rpc_pipe_open_interface()Simo Sorce1-1/+1
This way we can configure which rpc service we actually want to connect to. By default it uses an "embedded" interface and calls rpc_pipe_open_internal() Signed-off-by: Günther Deschner <gd@samba.org> Autobuild-User: Günther Deschner <gd@samba.org> Autobuild-Date: Fri May 13 14:40:26 CEST 2011 on sn-devel-104
2011-05-11s3-printing: make cups_pull_comment_location() work again.Günther Deschner1-13/+2
we deal with lp_cups_server in cups_connect() already, inside the URI all our other cups functions we use ipp://localhost, do the same here. Guenther Autobuild-User: Günther Deschner <gd@samba.org> Autobuild-Date: Wed May 11 11:36:07 CEST 2011 on sn-devel-104
2011-05-10s3-printing: Fix double free of cups request.Günther Deschner1-4/+0
We never free the request in our cups api usage except for here. The reason is probably htis (from the cupsDoConnect API docs): "This function sends the IPP request to the specified server, retrying and authenticating as necessary. The request is freed with ippDelete() after receiving a valid IPP response." Revert "Fix a memory leak in cups_pull_comment_location" This reverts commit fee2664dad37536b05ce8bdae3e74d45b257f632. Autobuild-User: Günther Deschner <gd@samba.org> Autobuild-Date: Tue May 10 17:32:58 CEST 2011 on sn-devel-104
2011-05-10s3-printing: very obvious fix for cups_pull_comment_location().Günther Deschner1-1/+1
This has been in there since 2008... Guenther
2011-05-06s3: only include tdb headers where needed.Günther Deschner7-1/+8
Guenther
2011-05-05More simple const fixes.Jeremy Allison2-3/+3
2011-05-05s3-printing: run minimal_includes.pl.Günther Deschner4-9/+0
Guenther
2011-05-04Fix warning messages caused by addition of null check in fstrcpy macro.Jeremy Allison1-1/+2
2011-05-02s3: include ntdomain.h before including generated srv_ headers.Günther Deschner1-0/+1
Guenther
2011-05-02s3-printing: include ../librpc/ndr/libndr.h in ads printing.Günther Deschner1-0/+1
Guenther
2011-05-02s3-printing: avoid using pipes_struct when only session_info is needed.Günther Deschner1-12/+11
Guenther
2011-05-02s3-proto: move remaining spoolss protos to own header file.Günther Deschner2-0/+2
Guenther
2011-05-02s3-proto: move rpc_srv_register protos and structs to town headerfile.Günther Deschner1-0/+1
Guenther
2011-04-21Fix compiler warning in debug message.Jeremy Allison1-2/+2
2011-04-20s3-smbd: fix the AIX 5.3 build.Günther Deschner1-0/+1
(AIX defines open to be open64) Guenther
2011-04-13s3-rpc_client: add and use rpc_client/rpc_client.h.Günther Deschner2-0/+2
Guenther
2011-04-11s3-printing: Use become_user_by_session() function.Andreas Schneider1-3/+3
We create a fake connection here and don't have an vuid. So work with the session_info directly here. Signed-off-by: Jeremy Allison <jra@samba.org> Autobuild-User: Jeremy Allison <jra@samba.org> Autobuild-Date: Mon Apr 11 22:56:12 CEST 2011 on sn-devel-104
2011-04-05s3: Fix print_spool_endVolker Lendecke1-12/+0
We have to use the spoolss pipe instance opened in print_spool_open, otherwise the spoolss server won't be able to find the right printer and job.
2011-03-30s3-includes: only include ntdomain.h where needed.Günther Deschner1-0/+1
Guenther
2011-03-30s3-messages: make ndr_messaging.h part of messages.h.Günther Deschner4-4/+0
Guenther
2011-03-30s3-messages: only include messages.h where needed.Günther Deschner4-0/+4
Guenther
2011-03-30s3-auth: printing needs auth.hGünther Deschner4-0/+4
Guenther
2011-03-30s3-locking: move locking prototypes out of proto.h.Günther Deschner1-0/+1
Will later become part of locking.h Guenther
2011-03-30s3: printing needs parts of smbd.Günther Deschner3-0/+3
Guenther
2011-03-30s3: include smbd/smbd.h where needed.Günther Deschner1-0/+1
Guenther
2011-03-30s3-passdb: use passdb headers where needed.Günther Deschner1-0/+1
Guenther
generated by cgit (git 2.34.1) at 2024-11-01 12:07:03 +0000