Age | Commit message (Collapse) | Author | Files | Lines |
|
Jeremy.
(This used to be commit 7bfd25c75602e25da73710261a54da8e0feea133)
|
|
bugs in various places whilst doing this (places that assumed
BOOL == int). I also need to fix the Samba4 pidl generation
(next checkin).
Jeremy.
(This used to be commit f35a266b3cbb3e5fa6a86be60f34fe340a3ca71f)
|
|
to unix_convert().
Jeremy.
(This used to be commit 39c211a702e91c34c1a5a689e1b0c4530ea8a1ac)
|
|
Jeremy.
(This used to be commit b3f0d39d11fa18b7bfef6cec88efaf4a2be2d6e0)
|
|
(This used to be commit df648d47ff3c4e24f439fda839653bda98323100)
|
|
This adds the two functions talloc_stackframe() and talloc_tos().
* When a new talloc stackframe is allocated with talloc_stackframe(), then
* the TALLOC_CTX returned with talloc_tos() is reset to that new
* frame. Whenever that stack frame is TALLOC_FREE()'ed, then the reverse
* happens: The previous talloc_tos() is restored.
*
* This API is designed to be robust in the sense that if someone forgets to
* TALLOC_FREE() a stackframe, then the next outer one correctly cleans up and
* resets the talloc_tos().
The original motivation for this patch was to get rid of the
sid_string_static & friends buffers. Explicitly passing talloc context
everywhere clutters code too much for my taste, so an implicit
talloc_tos() is introduced here. Many of these static buffers are
replaced by a single static pointer.
The intended use would thus be that low-level functions can rather
freely push stuff to talloc_tos, the upper layers clean up by freeing
the stackframe. The more of these stackframes are used and correctly
freed the more exact the memory cleanup happens.
This patch removes the main_loop_talloc_ctx, tmp_talloc_ctx and
lp_talloc_ctx (did I forget any?)
So, never do a
tmp_ctx = talloc_init("foo");
anymore, instead, use
tmp_ctx = talloc_stackframe()
:-)
Volker
(This used to be commit 6585ea2cb7f417e14540495b9c7380fe9c8c717b)
|
|
Remove reply_prep/post_legacy from send_trans_replies
(This used to be commit c08366f840ead5aba7199cf0b058587055b4d98e)
|
|
(This used to be commit b01664b43b0bd94bb59dec57480d2be954a7298a)
|
|
This is in preparation of the trans2 conversion: srvstr_push should not
look at inbuf directly.
(This used to be commit 5fd7e6a3821bea26d352e3edc23b7a216b1200e5)
|
|
Thanks!
Volker
(This used to be commit 46997a70199296d4ec45780f002898f23029bb26)
|
|
(This used to be commit b0132e94fc5fef936aa766fb99a306b3628e9f07)
|
|
Jeremy.
(This used to be commit 407e6e695b8366369b7c76af1ff76869b45347b3)
|
|
doing this because for the clustering the marshalling is needed in more
than one place, so I wanted a decent routine to marshall a message_rec
struct which was not there before.
Tridge, this seems about the same speed as it used to be before, the
librpc/ndr overhead in my tests was under the noise.
Volker
(This used to be commit eaefd00563173dfabb7716c5695ac0a2f7139bb6)
|
|
(This used to be commit cc92ce665dcfe9054d09429219883b18a4cab090)
|
|
connections_traverse
and connections_forall. This centralizes all the routines that did individual
tdb_open("connections.tdb") and direct tdb_traverse.
Volker
(This used to be commit e43e94cda1ad8876b3cb5d1129080b57fa6ec214)
|
|
Volker
(This used to be commit 5d428400f77399b7fc30fb2a0fb10f0c74b96458)
|
|
to all callers of smb_setlen (via set_message()
calls). This will allow the server to reflect back
the correct encryption context.
Jeremy.
(This used to be commit 2d80a96120a5fe2fe726f00746d36d85044c4bdb)
|
|
restrictive about strings being NULL. If an info level
doesn't use a subformat the subformat string may be
missing (null). Add debug statements to help track
this.
Jeremy
(This used to be commit 70875f92a22985539dc41e26a084218a45e1a13f)
|
|
call patch. Jerry, this works now for displaying
shares on Win9x (and hopefully everything else
as well :-).
Jeremy.
(This used to be commit 728a4cc71376f9cfff2578d21a47602f8b7c6531)
|
|
redundent. Remove it.
Jeremy.
(This used to be commit 140881cfbb59ce4a699b5900efe02bf315be7bd5)
|
|
(This used to be commit 08ea2b83b26968990fce191cdafe26d3183518a6)
|
|
looks much
easier to review! Damn close to what I had in my tree, just the fn names were
slightly different.
This removes one unnecessary dupe.
Next thing is to get rid of the parameter "n" of skip_string, there is only
one (!) caller that does not pass in 1....
Volker
(This used to be commit 2878c1e93a8d71288fa3144cff57bce66c592e22)
|
|
suggested. I now use :
BOOL is_offset_safe(const char *buf_base, size_t buf_len, char *ptr, size_t off)
char *get_safe_ptr(const char *buf_base, size_t buf_len, char *ptr, size_t off)
char *get_safe_str_ptr(const char *buf_base, size_t buf_len, char *ptr, size_t off)
int get_safe_SVAL(const char *buf_base, size_t buf_len, char *ptr, size_t off, int failval)
int get_safe_IVAL(const char *buf_base, size_t buf_len, char *ptr, size_t off, int failval)
Volker, please criticize and comment. Thanks,
Jeremy.
(This used to be commit d47af7c9263f519e7307859b6a696d854c5dfca3)
|
|
Jeremy.
(This used to be commit 99092e8841edea468fa1e59a8c725f3467b58966)
|
|
but I've no option.
Jeremy.
(This used to be commit c3a565081d70b209a4f9e6e8f1859bf7194a5f74)
|
|
(This used to be commit 6cab254c49e07b11c170511ec613f0f33914c3e6)
|
|
(This used to be commit 370c24ba2ad3bce29929886f96d626e698da0238)
|
|
Implement 'net rap server name'.
Volker
(This used to be commit 919385ed2a2a07e848bc0baaac9ed3d1964d4386)
|
|
* autogenerate lsa ndr code
* rename 'enum SID_NAME_USE' to 'enum lsa_SidType'
* merge a log more security descriptor functions from
gen_ndr/ndr_security.c in SAMBA_4_0
The most embarassing thing is the "#define strlen_m strlen"
We need a real implementation in SAMBA_3_0 which I'll work on
after this code is in.
(This used to be commit 3da9f80c28b1e75ef6d46d38fbb81ade6b9fa951)
|
|
Stanford Checker fix.
Jeremy.
(This used to be commit 2d8bdd2dce633253780a5b0378f229893d049666)
|
|
to do the upper layer directories but this is what
everyone is waiting for....
Jeremy.
(This used to be commit 9dafb7f48ca3e7af956b0a7d1720c2546fc4cfb8)
|
|
Make 2 important changes. pdb_get_methods()
returning NULL is a *fatal* error. Don't try
and cope with it just call smb_panic. This
removes a *lot* of pointless "if (!pdb)" handling
code. Secondly, ensure that if samu_init()
fails we *always* back out of a function. That
way we are never in a situation where the pdb_XXX()
functions need to start with a "if (sampass)"
test - this was just bad design, not defensive
programming.
Jeremy.
(This used to be commit a0d368197d6ae6777b7c2c3c6e970ab8ae7ca2ae)
|
|
can return NULL. Ensure we check all returns correctly.
Jeremy.
(This used to be commit 6c61dc8ed6d84f310ef391fb7700e93ef42c4afc)
|
|
(This used to be commit 08d7fd31ab250bc6ba3922b36aa7b0cfef1e5bf1)
|
|
realloc can return NULL in one of two cases - (1) the realloc failed,
(2) realloc succeeded but the new size requested was zero, in which
case this is identical to a free() call.
The error paths dealing with these two cases should be different,
but mostly weren't. Secondly the standard idiom for dealing with
realloc when you know the new size is non-zero is the following :
tmp = realloc(p, size);
if (!tmp) {
SAFE_FREE(p);
return error;
} else {
p = tmp;
}
However, there were *many* *many* places in Samba where we were
using the old (broken) idiom of :
p = realloc(p, size)
if (!p) {
return error;
}
which will leak the memory pointed to by p on realloc fail.
This commit (hopefully) fixes all these cases by moving to
a standard idiom of :
p = SMB_REALLOC(p, size)
if (!p) {
return error;
}
Where if the realloc returns null due to the realloc failing
or size == 0 we *guarentee* that the storage pointed to by p
has been freed. This allows me to remove a lot of code that
was dealing with the standard (more verbose) method that required
a tmp pointer. This is almost always what you want. When a
realloc fails you never usually want the old memory, you
want to free it and get into your error processing asap.
For the 11 remaining cases where we really do need to keep the
old pointer I have invented the new macro SMB_REALLOC_KEEP_OLD_ON_ERROR,
which can be used as follows :
tmp = SMB_REALLOC_KEEP_OLD_ON_ERROR(p, size);
if (!tmp) {
SAFE_FREE(p);
return error;
} else {
p = tmp;
}
SMB_REALLOC_KEEP_OLD_ON_ERROR guarentees never to free the
pointer p, even on size == 0 or realloc fail. All this is
done by a hidden extra argument to Realloc(), BOOL free_old_on_error
which is set appropriately by the SMB_REALLOC and SMB_REALLOC_KEEP_OLD_ON_ERROR
macros (and their array counterparts).
It remains to be seen what this will do to our Coverity bug count :-).
Jeremy.
(This used to be commit 1d710d06a214f3f1740e80e0bffd6aab44aac2b0)
|
|
* replace all pdb_{init,fill}_sam_pw() calls with samu_set_unix()
(This used to be commit 6f1afa4acc93a07d0ee9940822d7715acaae634f)
|
|
to make full use of the new talloc() interface. Discussed with Volker
and Jeremy.
* remove the internal mem_ctx and simply use the talloc()
structure as the context.
* replace the internal free_fn() with a talloc_destructor() function
* remove the unnecessary private nested structure
* rename SAM_ACCOUNT to 'struct samu' to indicate the current an
upcoming changes. Groups will most likely be replaced with a
'struct samg' in the future.
Note that there are now passbd API changes. And for the most
part, the wrapper functions remain the same.
While this code has been tested on tdb and ldap based Samba PDC's
as well as Samba member servers, there are probably still
some bugs. The code also needs more testing under valgrind to
ensure it's not leaking memory.
But it's a start......
(This used to be commit 19b7593972480540283c5bf02c02e5ecd8d2c3f0)
|
|
macro which sets the freed pointer to NULL.
(This used to be commit b65be8874a2efe5a4b167448960a4fcf6bd995e2)
|
|
Guenther
(This used to be commit 40a21776a7a16f3200e87c6564d9b6e8c481dd1e)
|
|
Sync with trunk as off r13315
(This used to be commit 17e63ac4ed8325c0d44fe62b2442449f3298559f)
|
|
char *,
use a temporary talloc_ctx for clarity.
Volker
(This used to be commit b15815c804bf3e558ed6357b5e9a6e3e0fac777f)
|
|
build farm
reacts :-)
Volker
(This used to be commit 9f99d04a54588cd9d1a1ab163ebb304437f932f7)
|
|
of the Samba4 timezone handling code back into Samba3.
Gets rid of "kludge-gmt" and removes the effectiveness
of the parameter "time offset" (I can add this back
in very easily if needed) - it's no longer being
looked at. I'm hoping this will fix the problems people
have been having with DST transitions. I'll start comprehensive
testing tomorrow, but for now all modifications are done.
Splits time get/set functions into srv_XXX and cli_XXX
as they need to look at different timezone offsets.
Get rid of much of the "efficiency" cruft that was
added to Samba back in the day when the C library
timezone handling functions were slow.
Jeremy.
(This used to be commit 414303bc0272f207046b471a0364fa296b67c1f8)
|
|
x86_64 box.
Jeremy.
(This used to be commit d720867a788c735e56d53d63265255830ec21208)
|
|
This file need a lot of error path cleanup.
Jeremy.
(This used to be commit ce93e469d80bb26cda390626ba8cc55ff9c822b6)
|
|
Jeremy.
(This used to be commit 0b85900fc8d79c71af986bb8b6346bba7840a704)
|
|
nowadays? This looks rather broken, but survives basic tests with 'net'.
Volker
(This used to be commit 7ae1b94e3eda574729272238cd08e83a33278a7e)
|
|
(This used to be commit efea76ac71412f8622cd233912309e91b9ea52da)
|
|
the gloval variable 'local_machine'
(This used to be commit 6a6e4af46a5c0a693a3dd9d558a4d1c1e5d72d95)
|
|
This allows the ldap-backend to search much more effeciently. Machines
will be searched in the ldap_machine_suffix and users in the
ldap_users_suffix. (Note that we already use the ldap_group_suffix in
ldapsam_setsamgrent for quite some time).
Using the specific ldap-bases becomes notably important in large
domains: On my testmachine "net rpc trustdom list" has to search through
40k accounts just to list 3 interdomain-trust-accounts, similiar effects
show up the non-user query_dispinfo-calls, etc.
Also renamed all_machines to only_machines in load_sampwd_entries()
since that reflects better what is really meant.
Guenther
(This used to be commit 6394257cc721ca739bda0e320375f04506913533)
|