| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Jeremy.
(This used to be commit 2c2fc8513699eb39721ac1d65fa1fdaecde526a8)
|
|
Jeremy.
(This used to be commit 121b59669fbcd1aaedb08011ff36169fc6561c55)
|
|
Jeremy.
(This used to be commit 362574c5a32005d4247c7ac75a5aa9e35e894db0)
|
|
Jeremy.
(This used to be commit 6706e258e17c3d69d617b95feb3407124f50852d)
|
|
fact that an NT client can open a file for O_RDONLY,
but set the create disposition to FILE_EXISTS_TRUNCATE.
If the client *can* write to the file, then it expects to
truncate the file, even though it is opening for readonly.
Quicken uses this stupid trick in backup file creation...
Thanks *greatly* to "David W. Chapman Jr." <dwcjr@inethouston.net>
for helping track this one down. It didn't bite us in 2.0.x
as we always opened files read-write in that release.
Jeremy.
(This used to be commit 5baef56831f9bc4fa10a851abd5f9305b974fb3b)
|
|
configure.in:
include/config.h.in:
include/profile.h:
smbd/vfs-wrap.c:
smbd/vfs.c:
Added fchmod and fchown to VFS (sorry Gerald - but we needed them anyway).
smbd/dosmode.c:
smbd/files.c:
printing/printfsp.c:
smbd/close.c:
smbd/open.c:
Fixed "dos filemode" correctly so there are no race conditions. Forces test
of open of file O_WRONLY before allowing fchmod as root. Afterwards, calls
standard close function that preserves POSIX locks due to POSIX-me-harder
braindamage. :-). Andrew please review this code.
Also - in removing the tmpdir param in smbrun an extra NULL parameter
was missed in each print_run_command() call (which is a varargs fn.).
Now fixed.
Jeremy.
(This used to be commit 32397e5bc6d995ce7ca37c82d6aedc1e5b1b6fbd)
|
|
Jeremy.
(This used to be commit 192887fe72157a141b8df1977085f479e5204782)
|
|
when copying to a full disk problem, I discovered that we were not allowing
the delete on close flag to be set properly, this led to other things, and
after investigation of the proper delete on close semantics and their relationship
to the file_share_delete flag I discovered there were some cases where we
weren't doing the deny modes properly. And this after only 5 years working
on them..... :-) :-).
So here's the latest attempt. I realised the delete on close flag needs to
be set across all smbds with a dev/ino pair open - in addition, the delete
on close flag, allow share delete and delete access requested all need to
be stored in the share mode tdb.
The "delete_on_close" entry in the fsp struct is now redundant and should
really be removed. This may also mean we can get rid of the "iterate_fsp"
calls that I didn't like adding in the first place. Whilst doing this patch,
I also discovered we needed to do the se_map_generic() call for file opens
and POSIX ACL mapping, so I added that also.
This code, although ugly, now passes the deny mode torture tests plus the
delete on close tests I added. I do need to add one more multiple connection
delete on close test to make sure I got the semantics exactly right, plus we
should also (as Andrew suggested) move to random testing here.
The good news is that NT should now correctly delete the file on disk
full error when copying to a disk :-).
Jeremy.
(This used to be commit 51987684bd231c744da2e5f3705fd236d5616173)
|
|
to the places where [f]chmod_acl is called instead.
Jeremy.
(This used to be commit 641ada44ae6429761c1fd0dbcafabc69f897fac7)
|
|
RPC code to merge with new passdb code.
Currently rpcclient doesn't compile. I'm working on it...
Jeremy.
(This used to be commit 0be41d5158ea4e645e93e8cd30617c038416e549)
|
|
Jeremy.
(This used to be commit e0431672cc54ed09d6c5cf083054db12ccd9dcf6)
|
|
smbd/vfs-wrap.c:
smbd/vfs.c: Added fchmod_acl and chmod_acl.
lib/substitute.c:
smbd/lanman.c:
smbd/open.c:
smbd/process.c:
smbd/reply.c:
smbd/service.c: Removed sessetup_user variable. Added current_user_info struct
which conatins domain info etc. Added '%D' for client domain parameter.
Jeremy.
(This used to be commit 2844ec3d511680609d6794b8718001a1bda9e89f)
|
|
a choice of invalid share mode and access denied. We must return the
access denied by preference, but also remember to break the oplocks...
This is needed for multi-user MS-Access.
Jeremy.
(This used to be commit 7eb7241442ea0f1e065b009c3cccd5821b89a8b6)
|
|
Jeremy.
(This used to be commit 979aa01e011d433328af0ead7644f47d0cfadf13)
|
|
I hope not). If you encounter strange file-serving behavior after this
patch then back it out. I analysed our stat() usage and realised we
were doing approx. 3 stat calls per open, and 2 per getattr/setattr.
This patch should fix all that. It causes the stat struct returned
from unix_convert() (which now *must* be passed a valid SMB_STRUCT_STAT
pointer) to be passed through into the open code. This should prevent
the multiple stats that were being done so as not to violate layer
encapsulation in the API's.
Herb - if you could run a NetBench test with this code and do a
padc/par syscall test and also run with the current 2.2.0 code
and test the padc/par syscalls I'd appreciate it - you should
find the number of stat calls reduced - not sure by how much.
The patch depends on unix_convert() actually finding the file
and returning a stat struct, or returning a zero'd out stat
struct if the file didn't exist. I believe we can guarentee this
to be the case - I just wasn't confident enough to make this
an assertion before.
Ok ok - I did write this whilst at the Miami conference.....
sometimes you get a little free time at these things :-).
Jeremy.
(This used to be commit 66a5c05ec46b641224fbe01b30bd7e83571a2a1b)
|
|
a conn struct depending on the call.
We need this to have a clean NT ACL call interface.
This will break any existing VFS libraries (that's why this is pre-release
code).
Andrew gets credit for this one :-) :-).
In addition - added Herb's WITH_PROFILE changes - Herb - please examine
the changes I've made to the smbd/reply.c code you added. The original
code was very ugly and I have replaced it with a
START_PROFILE(x)/END_PROFILE(x) pair using the preprocessor.
Please check this compiles ok with the --with-profile switch.
Jeremy.
(This used to be commit b07611f8159b0b3f42e7e02611be9f4d56de96f5)
|
|
mkdir high bits patch from Robert Dahlem" <Robert.Dahlem@gmx.net>.
jeremy.
(This used to be commit b40191d27180ab1e59935086073c4d312552f717)
|
|
prevent possible deadlocks with kernel leases and harmless when kernel
leases are not used.
basically we don't ever want smbd to block
(This used to be commit 9fd67b94a7e43c9dcbe098940b88879ae8743c00)
|
|
I suspect we will either get rid of them or do them properly at some
stage.
(This used to be commit fabe1f350e1fc58db33d22cebd38652950697ced)
|
|
Jeremy.
(This used to be commit c54e77b1f9defce3d6c2e530e0fb460c2b0c54c2)
|
|
this adds "#define OLD_NTDOMAIN 1" in lots of places. Don't panic -
this isn't permanent, it should go after another few merge steps have
been done
(This used to be commit 92109d7b3c06f240452d39f669ecb8c9c86ab610)
|
|
of doing a system call every time we want to just get our pid.
Jeremy.
(This used to be commit 148628b616b5c29ba6340d65fc3ddbcabba6e67a)
|
|
fd_close now calls fd_close_posix() directly.
set_posix_lock/release_posix_lock() now handle the reference counting.
More changes due when this gets moved to the file locking/posix.c
Jeremy.
(This used to be commit 239abd48f049c6a8d2bbc0636eacf347ab77588c)
|
|
When a file is being closed, once it passes the fnum and tid tests then
the locking context should be ignored when removing all locks. This is
what is done in the brl close case, but when you have outstanding
POSIX locks, then you cannot remove all the brl locks in one go, you
have to get the lock list and call do_unlock individually. As this
uses global_smbpid as the locking context, you need to make sure
that this is set correctly for the specific lock being removed. I
now do this by storing the smbpid in each entry in the unlock list returned from
the query call. I removed the smbpid from fsp (not needed) and
things seem ok (even with the stupid smbpid tricks that smbtorture plays :-).
Jeremy.
(This used to be commit 6baa96bb466915cc17e8cbad50254d6bd47b967b)
|
|
smbpid used when a file was opened in the files_struct. Else we use
the wrong global_smbpid when we are closing the file and trying to
remove the brl locks - this causes the brl locks to be left when the
file is closed as the samba_context check fails.
Jeremy.
(This used to be commit 2746e5602e493e5b022764b4b839eb4d2f14363b)
|
|
removed from the smbd/open.c code.
We now use a dlink list of structures indexed by dev/inode to store
all pending fd's for close. This could be rewritten to use lib/hash.c
if this is discovered to be too slow in use.
Andrew, please take a look and let me know if this is what you
had in mind.
Jeremy.
(This used to be commit 0487841120a7584da9a2b83b9574562c415d7024)
|
|
test. Was miscounting posix locks, plus was not taking into account
the case where other_fsp == fsp in the 'move locks' case. DOH ! This
code will be re-written anyway :-).
Jeremy.
(This used to be commit 5278ec016cb24d8263fe6e7c1d389f466270ef24)
|
|
open on the same dev/inode pair with existing POSIX locks.
This is done at the smbd/open layer, so smbd just calls fd_close() and
the transfer of any open fd's is done under the covers of fd_close().
When an fsp is closed and no other fsp's open on the same dev/inode
pair have existing POSIX locks then all fd's associated with this fsp
are closed.
Now only the hard part of doing the POSIX range unlock code when read
locks overlap remains for full POSIX/SMB lock integration....
Jeremy.
(This used to be commit 1df48ed55ee303b6d84d7277fd79761cfe5f7052)
|
|
fsp->open is no longer needed (if an fsp pointer is valid, then it's open :-).
NB for Luke, this patch also did not apply to TNG. TNG is not yet
identical w.r.t file serving with HEAD. This makes it impossible for
me to help maintain TNG. Please fix asap.
lib/substitute.c: Removed unused variable (pidstr).
Jeremy.
(This used to be commit 389b700a26e8a308a0dff6fc038c38068aa0119a)
|
|
new open mechanism Andrew & I discussed.
config.sub:
configure: Included the QNX patch.
include/vfs.h:
smbd/vfs-wrap.c:
smbd/vfs.c: Added ftruncate vfs call (needed).
Note that we will also need locking calls in the vfs (to be added).
lib/util_unistr.c:
nmbd/nmbd_processlogon.c: Fix for NT domain logons causing nmbd to core dump.
Also fix for sidsize DOS bug.
locking/locking.c: Check value of ret before using it for memdup.
printing/printing.c: Convert print_fsp_open to return an allocated fsp.
rpc_server/srv_lsa.c: Fix for NT domain logons.
I have removed all use of lp_share_modes() from the code (although I
left the parameter in the table for backwards compatibility). It no longer makes
sense for this to exist.
smbd/close.c: Removed lp_share_modes().
smbd/fileio.c: Fixed parameters to unlock_share_entry call in panic code.
smbd/files.c: Correctly set the unix_ERR_code to ERRnofids on fsp allocation fail.
smbd/nttrans.c:
smbd/reply.c:
smbd/trans2.c: Changed all occurrences of open_file_shared/open_directory/
open_file_stat to return an fsp from the call.
smbd/open.c: Changed all occurrences of open_file_shared/open_directory/
open_file_stat to return an fsp from the call.
In addition I have fixed a long standing race condition in the deny mode
processing w.r.t. two smbd's creating a file. Andrew, please note that
your original idea of using open with O_EXCL in this case would not work
(I went over the races very carefully) and so we must re-check deny modes
*after* the open() call returns. This is because there is a race between
the open with O_EXCL and the lock of the share mode entry. Imagine the
case where the first smbd does the open with O_EXCL and a deny mode of DENY_ALL,
but is pre-empted before it locks the share modes and creates the deny
mode entry for DENY_ALL. A second smbd could then come in with O_RDONLY
and a deny mode of DENY_NONE and the two opens would be allowed.
The *only* way to fix this race is to lock the share modes after the
open and then do the deny mode checks *after* this lock in the case
where the file did not originally exist.
This code will need extensive testing but seems to initially work.
Jeremy.
(This used to be commit ab0ecc39d688f16b9692fe90b991f0b89287070a)
|
|
------------
The following series of commits are for the new tdb based printing
backend. This completely replaces our old printing backend.
Major changes include:
- all print ops are now done in printing/*.c rather than scattered all
over the place
- system job ids are decoupled from SMB job ids
- the lpq parsers don't need to be nearly so smart, they only need to
parse the filename, the status and system job id
- we can store lots more info about a job, including the full job name
- the queue cache control is much better
I also added a new utility routine file_lines_load() that loads a text
file and parses it into lines. This is used in out lpq parsing and I
also want to use it to replace all of our fgets() based code in other
places.
(This used to be commit d870542c2884510bd45fd5b54ff2157434d53f4c)
|
|
but the structure is done enough so that Andrew can look it over and give
a yea/nay decision.
Jeremy.
(This used to be commit db96f83e34a139f47776fcbb5c1624fbf9d9943b)
|
|
read-only open on a directory was done and return an EISDIR from open_file().
Changed interface to fd_close to return error.
Jeremy.
(This used to be commit df4302f3911447fcebe9342f6cbf3b89bd3bafba)
|
|
handling to printing/printing.c
most of this was just replacing things like fsp->fd_ptr->fd with fsp->fd
the changes in open.c are quite dramatic. Most of it is removing all
the functions that handled the fd multiplexing
(This used to be commit d1827a3648009fd0a0d165055015d9aeda7a1037)
|
|
will be non-NULL.
(This used to be commit 02f845e54351ec57ee873a8ed887285552c6ecab)
|
|
aono@cc.osaka-kyoiku.ac.jp (Tomoki AONO)
(This used to be commit 176c405d2702a4245561ff56c8eac3c754a0dea3)
|
|
Synopsis: change every disk access function to work through a vfs_ops
structure contained in the connection_struct.
(This used to be commit 3aad500c0fb61232ed3431ff4b743b5d18ec852f)
|
|
difference to the result.
(This used to be commit 9e28b7220bc293e386fec30c2d2e7e401b61b1f7)
|
|
maths to
(This used to be commit 0ad62f128d1c26b8f7e71bc045c6f4a584f8d374)
|
|
I've finally got the access table code right for the case where the
two opens are on the same connection. It is _incredibly_ complex, but
now all 1296 test cases pass.
I'll be very surprised if anyone by MS and us gets this right at
CIFS2000
(This used to be commit 31a5857ce4f03eb53ff8ea96c5f1ce335941336d)
|
|
*.sym and *.com files. I still find it incredible that SMB treats file
locking differently depending on the file name - that is so ugly it
stinks.
anyway, we now behave the same way as NT, except for the
same-connection case which I'm still working on.
(This used to be commit 5b9be3feca26f1f20fe3f32ba90769cc78f9bb6b)
|
|
Fixed locking bug found by Andrew.
Jeremy.
(This used to be commit 38dffd360dc2e44bfc9e751f017e24f81ff0f2fa)
|
|
(This used to be commit 44117df2c908d473b3e1a1020b22af6d584809ef)
|
|
now exactly match NT for normal files. We still don't match for *.exe files though
(This used to be commit 3f7fea58e8da6d98acadaabf0498ea2e88ea5678)
|
|
: If a file is resident on NT and the first user opens it read/write with DENY_READ then a subsequent
: attempt by a second user (running under Windows 95) to open it read/write DENY_NONE fails.
: Under samba 2.0.5a the second open succeeds but the file is write only.
Jeremy.
(This used to be commit 974af581fe428fd0233c2516b16a5132b0e1b583)
|
|
instead of either sysv or mmap shared memory or lock files.
this means we can now completely remove
locking_shm.c
locking_slow.c
shmem.c
shmem_sysv.c
and lots of other things also got simpler
locking.c got a bit larger, but is much better compartmentalised now
(This used to be commit e48c2d9937eea0667b8cd3332e49c06314ef31e7)
|
|
(This used to be commit 453a822a76780063dff23526c35408866d0c0154)
|
|
Use VFS I/O for fd_attempt_open() and check_access_allowed_for_current_user().
(This used to be commit abf31ca66f3dab1b8bd7772f83e736e41afb4b1e)
|
|
Changed arg to fd_attempt_close() from fd to fsp_struct.
(This used to be commit c40124bc9a2ebccf0bb56b1fafa81a551d934aa5)
|
|
creating locking masks
(This used to be commit 5e2844d5edb15de29b976d2ff077ffbe012b860c)
|
