Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
|
|
oplocks.
This one is subtle. There is a race condition where a signal can be
queued for oplock break, and then the file can be closed by the client
before the signal can be processed. Currently if this occurs we panic
(we can't match an incoming signal fd with a fsp pointer). Simply log
the error (at debug level 10 right now, might be too much) and then
return without processing the break request. It looks like there is
another race condition with this fix, but here's why it won't happen.
If the signal was pending (caused by a kernel oplock break from a
local file open), and the client closed the file and then re-opened
another file which happened to use the same file descriptor as the
file just closed, then theoretically the oplock break requests could
be processed on the wrong fd. Here's why this should be very rare..
Processing a pending signal always take precedence over an incoming
network request, so as long as the client close request is non-chained
then the break signal should always be harmlessly processed *before*
the open can be called. If the open is chained onto the close, and
the fd on the new open is the same as the old closed fd, then it's
possible this race will occur. However, all that will happen is that
we'll lose the oplock on this file. A shame, but not a fatal event.
Jeremy.
|
|
Should help track if we get invoked with an invalid fd from
the signal handler.
Jeremy.
|
|
|
|
This replaces release_level2_oplocks_on_change with
contend_level2_oplock_begin/end in order to contend level2 oplocks
throughout an operation rather than just at the begining. This is
necessary for some kernel oplock implementations, and also lays the
groundwork for better correctness in Samba's standard level2 oplock
handling. The next step for non-kernel oplocks is to add additional
state to the share mode lock struct that prevents any new opens from
granting oplocks while a contending operation is in progress.
All operations that contend level 2 oplocks are now correctly spanned
except for aio and synchronous writes. The two write paths both have
non-trivial error paths that need extra care to get right.
RAW-OPLOCK and the rest of 'make test' are still passing with this
change.
|
|
Level 2 for kernel oplocks
Pass in an extra argument when releasing an oplock so kernel oplock
implementations can support downgrading from Level 1 to Level 2.
|
|
And use signal events for Linux oplocks.
metze
|
|
This converts the irix oplocks code to use a fd event
and removes the last special case for file descriptors
for the main sys_select().
metze
|
|
The goal is to move all this variables into a big context structure.
metze
|
|
Can someone with gpfs available test this ? The only codepath using this
function is the modules/gpfs.c module. The fix resolves at least the build
issues Samba has with recent kernel / libcap versions by using the portable
cap_get_proc()/cap_set_proc() interface (instead of using capget/capset).
Guenther
(This used to be commit 177955141247a4eb56ba0d82dc1add7f52175c40)
|
|
(http://samba.org/~tridge/3_0-ctdb)
Signed-off-by: Alexander Bokovoy <ab@samba.org>(This used to be commit 0c8e23afbbb2d081fc23908bafcad04650bfacea)
|
|
Michael
(This used to be commit 8880eb82f16d561a4023ec8426f8ea35c579a7a6)
|
|
bugs in various places whilst doing this (places that assumed
BOOL == int). I also need to fix the Samba4 pidl generation
(next checkin).
Jeremy.
(This used to be commit f35a266b3cbb3e5fa6a86be60f34fe340a3ca71f)
|
|
This removes file_id_string_static and file_id_string_static2
(This used to be commit 638c848c9afe374feb30e34c494f89b2a6c64f7b)
|
|
(This used to be commit b0132e94fc5fef936aa766fb99a306b3628e9f07)
|
|
Jeremy.
(This used to be commit 407e6e695b8366369b7c76af1ff76869b45347b3)
|
|
This replaces the internal explicit dev/ino file id representation by a
"struct file_id". This is necessary as cluster file systems and NFS
don't necessarily assign the same device number to the shared file
system. With this structure in place we can now easily add different
schemes to map a file to a unique 64-bit device node.
Jeremy, you might note that I did not change the external interface of
smb_share_modes.c.
Volker
(This used to be commit 9b10dbbd5de8813fc15ebbb6be9b18010ffe8139)
|
|
it should be abstracted a little higher up so other os'es can have an
entry, but it will take a bit more work. Thanks to Chetan Shringarpure
and Mathias Dietz.
I didn't increment the vfs number again because the kernel change notify
stuff hasn't been released yet anyway.
(This used to be commit 9463211bf3b46ee408b88dfbf42d498e3839d4cc)
|
|
just
silly :-)
Volker
(This used to be commit 8b6f5937db4b18db711dd0c4f1ae904087249000)
|
|
fsp pointers. Ensure we cope with this to pass Samba4
DENY tests (we used to pass these, there must have been
a regression with newer code). We now pass them.
Jeremy
(This used to be commit fd6fa1d4eaf61783df74ee2da50d331477f06998)
|
|
consistent. Bring oplocks withing the purview of the locking debug
channel.
(This used to be commit e817cfd7d3a42d141198122eada58b5a7ba90e9c)
|
|
before it goes in.
Volker
(This used to be commit 2c3d5c029a31111e1fe84ddc13c1bfc183d8bfde)
|
|
modes and
oplocks across the cluster. Adapt Samba to it.
The gpfs API is called via libgpfs.so. This code is written with dlopen(), so
that you can compile on a system with gpfs installed and later on run on
systems without gpfs available.
So to actually make Samba call gpfs share mode calls you need to compile with
gpfs.h and libgpfs.so around and set 'gpfs share = yes' on the shares you
export from GPFS.
Volker
(This used to be commit 2253b17a1a88555291b59d52c826c81c2b8f7e7f)
|
|
* \PIPE\unixinfo
* winbindd's {group,alias}membership new functions
* winbindd's lookupsids() functionality
* swat (trunk changes to be reverted as per discussion with Deryck)
(This used to be commit 939c3cb5d78e3a2236209b296aa8aba8bdce32d3)
|
|
tests on this as it's very late NY time (just wanted to get this work
into the tree). I'll test this over the weekend....
Jerry - in looking at the difference between the two trees there
seem to be some printing/ntprinting.c and registry changes we might
want to examine to try keep in sync.
Jeremy.
(This used to be commit c7fe18761e2c753afbffd3a78abff46472a9b8eb)
|
|
printmig.exe work
* merge the sys_select_signal(char c) change from trunk
in order to keeo the winbind code in sync
(This used to be commit a112c5570a7f8ddddde1af0fa665f40a6067e8cf)
|
|
(This used to be commit 173375f8d88bf8e8db8d60e5d5f0e5dcc28767d9)
|
|
(This used to be commit efea76ac71412f8622cd233912309e91b9ea52da)
|
|
1. using smbc_getxattr() et al, one may now request all access control
entities in the ACL without getting all other NT attributes.
2. added the ability to exclude specified attributes from the result set
provided by smbc_getxattr() et al, when requesting all attributes,
all NT attributes, or all DOS attributes.
3. eliminated all compiler warnings, including when --enable-developer
compiler flags are in use. removed -Wcast-qual flag from list, as that
is specifically to force warnings in the case of casting away qualifiers.
Note: In the process of eliminating compiler warnings, a few nasties were
discovered. In the file libads/sasl.c, PRIVATE kerberos interfaces
are being used; and in libsmb/clikrb5.c, both PRIAVE and DEPRECATED
kerberos interfaces are being used. Someone who knows kerberos
should look at these and determine if there is an alternate method
of accomplishing the task.
(This used to be commit 994694f7f26da5099f071e1381271a70407f33bb)
|
|
(This used to be commit 23443e3aa079710221557e18158d0ddb8ff48a36)
|
|
the sa_mask to prevent valgrind complaints.
Jeremy.
(This used to be commit e065c3a58f5c7f2612596574046a73869183dbd3)
|
|
(This used to be commit 03a5e62300f3cfb96d14570b73a758e6fa64c449)
|
|
Andrew Bartlett
(This used to be commit 2a1adb8f81d8966e8919fffb9b4c69f3e6acd44f)
|
|
(This used to be commit 03ac082dcb375b6f3ca3d810a6a6367542bc23ce)
|
|
Changed "SMB/Netbios" to "SMB/CIFS" in file header.
(This used to be commit 6a58c9bd06d0d7502a24bf5ce5a2faf0a146edfa)
|
|
Jeremy
(This used to be commit 86c2f9636635283beb8e496315a7bfac881355dd)
|
|
in a tdb.
Jeremy.
(This used to be commit 058ae6b58f61ef46013dd076af3a84de5fbaaab1)
|
|
(This used to be commit 2d0922b0eabfdc0aaf1d0797482fef47ed7fde8e)
|
|
(This used to be commit 60d297303488ed583537ca2853828fccd6da2ade)
|
|
instead of a define
(This used to be commit e2ecff419fdc0a0dc7551b33b377dc11061ef2a3)
|
|
(This used to be commit 88a7b2c3f80b17ca8ab2112e9a98f55f1a11d88c)
|
|
linux_oplock_receive_message().
Jeremy.
(This used to be commit b35ca2c6b13877bc6e09c7c4179d9529a7d3e0b3)
|
|
RPC code to merge with new passdb code.
Currently rpcclient doesn't compile. I'm working on it...
Jeremy.
(This used to be commit 0be41d5158ea4e645e93e8cd30617c038416e549)
|
|
and the main code is declared as VOLATILE SIG_ATOMIC_T.
Jeremy.
(This used to be commit b737c784e34b0e1af014cb828ef37d5b6d73c3e2)
|
|
(This used to be commit c6be511fcc1be79619a0184f03d4c33dbfe12f04)
|
|
handling in Samba. This was needed due to several limitations and
races in the previous code - as a side effect the new code is much
cleaner :)
in summary:
- changed sys_select() to avoid a signal/select race condition. It is a
rare race but once we have signals doing notification and oplocks it
is important.
- changed our main processing loop to take advantage of the new
sys_select semantics
- split the notify code into implementaion dependent and general
parts. Added the following structure that defines an implementation:
struct cnotify_fns {
void * (*register_notify)(connection_struct *conn, char *path, uint32 flags);
BOOL (*check_notify)(connection_struct *conn, uint16 vuid, char *path, uint32 flags, void *data, time_t t);
void (*remove_notify)(void *data);
};
then I wrote two implementations, one using hash/poll (like our old
code) and the other using the new Linux kernel change notify. It
should be easy to add other change notify implementations by creating
a sructure of the above type.
- fixed a bug in change notify where we were returning the wrong error
code.
- rewrote the core change notify code to be much simpler
- moved to real-time signals for leases and change notify
Amazingly, it all seems to work. I was very surprised!
(This used to be commit 44766c39e0027c762bee8b33b12c621c109a3267)
|
|
(This used to be commit cc0e919fdcb116c8f9688a4f5d7803fc8d7f9588)
|
|
I used a trick where CAP_LEASE isn't claimed until it is needed. This
means we avoid a system call per setreuid(), and never call capset()
unless a user tries to get a oplock on a file that they don't own
(This used to be commit afa98d511f70f455d599c3a36dd25e49fe74ac09)
|
|
I had to modify sys_select() to not loop on EINTR. I added a wrapper
called sys_select_intr() which gives the old behaviour.
(This used to be commit b28cc4163bc2faaa80c5782fc02c8f03c410cdeb)
|