Age | Commit message (Collapse) | Author | Files | Lines |
|
Tested against non-encrypted and encrypted connections.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
|
|
Signed-off-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
|
|
length we should return.
LARGE_READX test shows it's always safe to return a short read.
Windows does so. Do the calculations to return what will fit
in a read depending on what the client negotiated.
Signed-off-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
|
|
We're going to replace this with a function that calculates
the max PDU to return on a read and supports short reads.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
|
|
Subtract 4 from smb_size (39) here as the length
of the SMB reply following the 4 byte type+length
field can be up to 0xFFFFFF bytes.
Signed-off-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
|
|
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
|
|
configure will abort if sizeof(off_t) is not 8.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
|
|
session setup
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
|
|
It's up to the server to decide the allowed length.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
|
|
This should allow smbclient to keep using large reads against older Samba versions
(<= 3.6.x) and other servers that may also require this.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
|
|
Signed-off-by: Gregor Beck <gbeck@sernet.de>
Reviewed-by: Christian Ambach <ambi@samba.org>
Autobuild-User(master): Christian Ambach <ambi@samba.org>
Autobuild-Date(master): Wed Mar 20 17:08:52 CET 2013 on sn-devel-104
|
|
forgot to bump this earlier when removing the counters for setdir
Signed-off-by: Christian Ambach <ambi@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
|
|
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Mon Mar 18 11:39:27 CET 2013 on sn-devel-104
|
|
The is_encrypted_packet() function should only be used on the raw received data
to determine if a packet came in encrypted. Once we're inside the SMB1
processing code in smbd/reply.c we should be looking at the
smb1request->encrypted field to determine if a packet was really encrypted or
not.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Sat Mar 16 12:44:44 CET 2013 on sn-devel-104
|
|
Reviewed-by: Jeremy Allison <jra@samba.org>
|
|
Reviewed-by: Jeremy Allison <jra@samba.org>
|
|
Reviewed-by: Jeremy Allison <jra@samba.org>
|
|
Reviewed-by: Jeremy Allison <jra@samba.org>
|
|
Reviewed-by: Jeremy Allison <jra@samba.org>
|
|
Reviewed-by: Jeremy Allison <jra@samba.org>
|
|
Reviewed-by: Jeremy Allison <jra@samba.org>
|
|
Reviewed-by: Günther Deschner <gd@samba.org>
|
|
This allows you to convert printing tdb's which are in e.g. in latin1 to
convert to UTF-8 and import them into the registry.
Reviewed-by: Günther Deschner <gd@samba.org>
|
|
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Thu Mar 14 14:46:02 CET 2013 on sn-devel-104
|
|
Signed-off-by: Guenter Kukkukk <kukks@samba.org>
Reviewed-by: Richard Sharpe <realrichardsharpe@samba.org>
Autobuild-User(master): Richard Sharpe <sharpe@samba.org>
Autobuild-Date(master): Tue Mar 12 07:36:13 CET 2013 on sn-devel-104
|
|
Signed-off-by: Guenter Kukkukk <kukks@samba.org>
Reviewed-by: Richard Sharpe <realrichardsharpe@gmail.com>
|
|
first approach
Signed-off-by: Guenter Kukkukk <kukks@samba.org>
Reviewed-by: Richard Sharpe <realrichardsharpe@gmail.com>
|
|
Signed-off-by: Guenter Kukkukk <kukks@samba.org>
Reviewed-by: Richard Sharpe <realrichardsharpe@gmail.com>
|
|
set dir seems to have been a special SMB command used by Pathworks clients
the supporting code for it was already removed in 2007, so just remove all
remnants related to it (smb.conf parameter, documentation, ...)
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Mar 12 01:03:37 CET 2013 on sn-devel-104
|
|
calls
When 6adc7dad96b8c7366da042f0d93b28c1ecb092eb removed the calls to
lp_security_mask/lp_force_security_mode/lp_dir_security_mask/lp_force_dir_security_mode
these calls were replaced with lp_create_mask() and lp_dir_mask()
The issue is that while lp_security_mask() and lp_dir_security_mask defaulted to
0777, the replacement calls did not. This changes behaviour, and incorrectly
prevents a posix mode being specified by the client from being applied to
the disk in the non-ACL enabled case.
Andrew Bartlett
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
|
|
These defaults were incorrectly added in
fc5caffbc139d63cab1ec105884863f73772586f in what turns out to be an
incorrect fix for bug #9462, which was in turn introduced by the
swapping of security mask (default 0777) for create mask (0755) in
6adc7dad96b8c7366da042f0d93b28c1ecb092eb.
While the permissions on sysvol and netlogon (the default shares) were
fixed by provision, any additional shares that did not yet have an
explit ACL set would create world-writable files by default.
Administrators will need to manually correct the file permissions on
any additional shares that were created after installation of the AD
DC.
Andrew Bartlett
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Sun Mar 10 12:00:31 CET 2013 on sn-devel-104
|
|
Create a new test environment with 'idmap config DOMAIN : backend =
rfc2307'. A new test script adds LDAP records and queries them again for
the mapped uid and gid.
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Sat Mar 9 08:18:43 CET 2013 on sn-devel-104
|
|
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
|
|
This module allows querying id mappings from LDAP servers as described
in RFC 2307. The LDAP records can be queried from an Active Directory
Server or from a stand-alone LDAP server.
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
|
|
Having this in a common place allows reuse by other idmap modules.
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
|
|
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
|
|
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
|
|
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
|
|
idmap_ad and idmap_ldap use the same helper functions and the same
maximum query size. Move the code to idmap_utils so that it can be
shared by every module issuing LDAP queries.
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
|
|
Currently it only plumbs itself into the copy_chunk call path,
translating such requests into BTRFS_IOC_CLONE_RANGE calls.
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
|
|
It is not an error to be logged at level 1 when a
domain has no explicitly configured idmap backend.
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Mar 8 03:16:54 CET 2013 on sn-devel-104
|
|
Signed-off-by: Guenter Kukkukk <kukks@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Mar 7 22:24:47 CET 2013 on sn-devel-104
|
|
THANKS to an IRC user (Raimund ?) who asked for a char mapping possibility.
I suggested vfs_catia - but it did not work!
Hopefully now it will. :-)
Signed-off-by: Guenter Kukkukk <kukks@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
|
|
Signed-off-by: Guenter Kukkukk <kukks@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
|
|
This allows a predictable password to be specified, just like --machinepass does on samba-tool domain join.
Andrew Bartlett
Reviewed-by: Jeremy Allison <jra@samba.org>
|
|
Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Wed Mar 6 01:16:34 CET 2013 on sn-devel-104
|
|
Reviewed-by: David Disseldorp <ddiss@samba.org>
|
|
PR_SET_NAME sets the comm field of a process. This way we can give
processes a name and they are easier to identify.
$ ps afx -o pid,comm
29447 smbd
29452 \_ epmd
29453 \_ lsasd-master
29455 | \_ lsasd-child
29457 | \_ lsasd-child
29459 | \_ lsasd-child
29461 | \_ lsasd-child
29463 | \_ lsasd-child
29454 \_ spoolssd-master
29456 \_ lpqd
29458 \_ spoolssd-child
29460 \_ spoolssd-child
29462 \_ spoolssd-child
29465 \_ spoolssd-child
29466 \_ spoolssd-child
29467 \_ spoolssd-child
29468 \_ spoolssd-child
29469 \_ spoolssd-child
29470 \_ spoolssd-child
29471 \_ spoolssd-child
Reviewed-by: David Disseldorp <ddiss@samba.org>
|
|
Reviewed-by: David Disseldorp <ddiss@samba.org>
|
|
Reviewed-by: David Disseldorp <ddiss@samba.org>
|