summaryrefslogtreecommitdiff
path: root/source3
AgeCommit message (Collapse)AuthorFilesLines
2012-01-05s3-auth supply s3 ntlmssp module via gensec_settingsAndrew Bartlett1-24/+11
This will allow the supply of multiple modules in future without duplicating the module selection logic. Andrew Bartlett Signed-off-by: Stefan Metzmacher <metze@samba.org>
2012-01-05s3-selftest: Add test for rpcclient, including kerberos authenticationAndrew Bartlett2-1/+29
Some knownfail entries are added for things the currently fail. Andrew Bartlett Signed-off-by: Stefan Metzmacher <metze@samba.org>
2012-01-05s3:gse: MIT krb5 1.8.1 has a bug in gss_wrap_iov()Stefan Metzmacher1-1/+1
gss_krb5int_make_seal_token_v3_iov() doesn't set '*conf_state'. metze
2012-01-05s3-librpc store the sign/seal flags we got in the gssapi clientAndrew Bartlett1-1/+1
Signed-off-by: Stefan Metzmacher <metze@samba.org>
2012-01-05s3-libads Factor out a new routine ↵Andrew Bartlett4-48/+69
kerberos_get_principal_from_service_hostname() This is now used in the GSE GSSAPI client, so that when we connect to a target server at the CIFS level, we use the same name to connect at the DCE/RPC level. Andrew Bartlett Signed-off-by: Stefan Metzmacher <metze@samba.org>
2012-01-05s3-librpc Use gsskrb5_get_subkey() where available to get the session keyAndrew Bartlett1-0/+15
This allows gse_get_session_key() to work against Heimdal. Andrew Bartlett Signed-off-by: Stefan Metzmacher <metze@samba.org>
2012-01-05s3: Remove some redundant codeVolker Lendecke1-5/+0
Autobuild-User: Volker Lendecke <vlendec@samba.org> Autobuild-Date: Thu Jan 5 17:16:45 CET 2012 on sn-devel-104
2012-01-05s3: Run the CLEANUP1 testVolker Lendecke1-0/+1
Autobuild-User: Volker Lendecke <vlendec@samba.org> Autobuild-Date: Thu Jan 5 14:42:43 CET 2012 on sn-devel-104
2012-01-05s3: Add a test excercising the share mode cleanup routineVolker Lendecke5-0/+73
2012-01-05s3: Move basic SMB checking to a much earlier pointVolker Lendecke1-19/+19
2012-01-05s3: Add a suicide mode to smbdVolker Lendecke1-0/+11
To test our cleanup code paths properly, we need a way to make smbd exit hard without cleaning up
2012-01-05s3: Fix some nonempty blank linesVolker Lendecke1-3/+3
2012-01-05Add S3 vfs_aio_pthread module to replace broken glibc aio code.Jeremy Allison5-0/+659
Compiles but not yet tested. Autobuild-User: Jeremy Allison <jra@samba.org> Autobuild-Date: Thu Jan 5 01:43:51 CET 2012 on sn-devel-104
2012-01-04s3-winbind: Fix segfault if we can't map the last user.Andreas Schneider1-0/+18
This fixes bug #8678. The issue is caused by bug #8608. Autobuild-User: Andreas Schneider <asn@cryptomilk.org> Autobuild-Date: Wed Jan 4 18:30:53 CET 2012 on sn-devel-104
2012-01-04s3-winbind: Move finding the domain to it's own function.Andreas Schneider1-11/+21
This the first part to fix bug #8678.
2012-01-04s3-perfcount: fix incorrect array length calculationsDavid Disseldorp1-9/+17
As reported by Ismail Doenmez (idonmez@suse.com), sizeof() is incorrectly used by _reg_perfcount_init_data_block() in an attempt to determine the length of a talloced array. Signed-off-by: Günther Deschner <gd@samba.org> Autobuild-User: Günther Deschner <gd@samba.org> Autobuild-Date: Wed Jan 4 16:54:37 CET 2012 on sn-devel-104
2012-01-04s3: Check for the packet size before accessing itVolker Lendecke1-2/+1
Autobuild-User: Jeremy Allison <jra@samba.org> Autobuild-Date: Wed Jan 4 15:16:20 CET 2012 on sn-devel-104
2012-01-03s3-cli: fix bug 563, >8GB tar on BE machinesMasafumi Nakayama1-5/+17
Borrows on existing patches proposed by Craig Barratt and Brad Ellis. Signed-off-by: David Disseldorp <ddiss@suse.de> Autobuild-User: David Disseldorp <ddiss@samba.org> Autobuild-Date: Tue Jan 3 18:31:28 CET 2012 on sn-devel-104
2012-01-03s3: Fix a cut&paste errorVolker Lendecke1-1/+1
Autobuild-User: Volker Lendecke <vlendec@samba.org> Autobuild-Date: Tue Jan 3 16:57:44 CET 2012 on sn-devel-104
2012-01-03s3: Fix a typoVolker Lendecke1-1/+1
2012-01-03s3: Remove the unused "file_existed" parameter from smbd_calculate_access_maskVolker Lendecke4-10/+2
Autobuild-User: Volker Lendecke <vlendec@samba.org> Autobuild-Date: Tue Jan 3 15:16:50 CET 2012 on sn-devel-104
2012-01-03s3: Avoid "file_existed" in smbd_calculate_maximum_allowed_accessVolker Lendecke1-36/+35
We access the file by name anyway, so we can just try to access it. The file system will for sure tell us if the file does not exist.
2012-01-03s3: Remove some else{} branches in smbd_calculate_maximum_allowed_accessVolker Lendecke1-3/+7
2012-01-03s3: Directly use *p_access_mask in smbd_calculate_maximum_allowed_accessVolker Lendecke1-6/+4
2012-01-03s3: Factor out smbd_calculate_maximum_allowed_accessVolker Lendecke1-40/+59
2012-01-01s3: Happy New Year 2012Stefan Metzmacher1-1/+1
metze
2011-12-31Final part of fix for bug #8679 - recvfile code path using splice() on Linux ↵Jeremy Allison1-5/+0
leaves data in the pipe on short write. The code to set a DOS error on short writeX return is amazingly legacy code, and also breaks the reply as fixup_chain_error_packet() enforces a 2-byte wct on any reply where smb_rcls != 0. Found in testing by Andrew Bartlett. Thanks Andrew ! Autobuild-User: Jeremy Allison <jra@samba.org> Autobuild-Date: Sat Dec 31 08:05:35 CET 2011 on sn-devel-104
2011-12-30Third part of fix for bug #8679 - recvfile code path using splice() on Linux ↵Jeremy Allison1-21/+18
leaves data in the pipe on short write. Fix default_sys_recvfile() to correctly cope with short writes. Return the amount written. Return -1 and set errno if no data could be written.
2011-12-30Second part of fix for bug #8679 - recvfile code path using splice() on ↵Jeremy Allison1-1/+30
Linux leaves data in the pipe on short write. Split out the functionality of drain_socket() into a separate function from default_sys_recvfile().
2011-12-28s3-auth Fix talloc parent for s4 event context in auth_samba4Andrew Bartlett1-1/+1
2011-12-28s3-auth: Remove protype for already-removed auth_ntlmssp_startAndrew Bartlett1-1/+0
2011-12-25s3: Fix a 64-bit warningVolker Lendecke1-1/+1
2011-12-25s3: Fix linking on LionVolker Lendecke1-0/+8
We are using CoreFoundation functions in charset_macosx.c. We need to link against that.
2011-12-25Fix bug #8679 - recvfile code path using splice() on Linux leaves data in ↵Jeremy Allison1-3/+2
the pipe on short write Bug found and fix suggested by Andrew Bartlett. Autobuild-User: Jeremy Allison <jra@samba.org> Autobuild-Date: Sun Dec 25 07:46:38 CET 2011 on sn-devel-104
2011-12-23s3:lib/ctdbd_conn: try ctdbd_init_connection() as rootStefan Metzmacher1-0/+2
ctdbd_traverse is only called if the main db_context is already open. So if we could get to information via dbwrap_fetch, we should also be able to traverse. metze Autobuild-User: Stefan Metzmacher <metze@samba.org> Autobuild-Date: Fri Dec 23 18:19:14 CET 2011 on sn-devel-104
2011-12-22s3-librpc Use gensec_sig_size() instead of a fixed NTLMSSP_SIG_SIZEAndrew Bartlett1-2/+7
Signed-off-by: Stefan Metzmacher <metze@samba.org> Autobuild-User: Stefan Metzmacher <metze@samba.org> Autobuild-Date: Thu Dec 22 20:57:27 CET 2011 on sn-devel-104
2011-12-22s3-rpc_server: Rework pipe_ntlmssp_auth_bind() to be genericAndrew Bartlett3-25/+63
Signed-off-by: Stefan Metzmacher <metze@samba.org>
2011-12-22s3-rpc_server: Allow gensec mechanisms to return NT_STATUS_OKAndrew Bartlett1-2/+2
If a kerberos mechanism is added, then it can return OK after just one packet. Andrew Bartlett Signed-off-by: Stefan Metzmacher <metze@samba.org>
2011-12-22s3-rpc_server: rename pipe_ntlmssp_verify_final() to ↵Andrew Bartlett1-3/+3
pipe_auth_generic_verify_final() Signed-off-by: Stefan Metzmacher <metze@samba.org>
2011-12-22s3-rpc_server: Rename dcesrv_ntlmssp.[ch] to dcesrv_auth_generic.[ch]Andrew Bartlett6-5/+5
Signed-off-by: Stefan Metzmacher <metze@samba.org>
2011-12-22s3-rpc_server rename NTLMSSP functions to auth_generic..()Andrew Bartlett4-11/+11
Signed-off-by: Stefan Metzmacher <metze@samba.org>
2011-12-22s3-rpc_server rename ntlmssp_server_auth_start() -> auth_generic_server_start()Andrew Bartlett4-5/+9
By adding an OID parameter we can make this routine generic to any gensec module that may be made available. Andrew Bartlett Signed-off-by: Stefan Metzmacher <metze@samba.org>
2011-12-22s3-rpc_server remove unused headerAndrew Bartlett1-1/+0
Signed-off-by: Stefan Metzmacher <metze@samba.org>
2011-12-22s3-auth split the auth_generic functions into a seperate fileAndrew Bartlett5-159/+194
Signed-off-by: Stefan Metzmacher <metze@samba.org>
2011-12-22s3-rpc_server request both sign and seal for clarityAndrew Bartlett1-1/+1
Signed-off-by: Stefan Metzmacher <metze@samba.org>
2011-12-22s3-auth remove auth_ntlmssp_start(), call auth_generic_start() directlyAndrew Bartlett5-14/+9
This makes it clear that this can support more than just NTLMSSP. Andrew Bartlett Signed-off-by: Stefan Metzmacher <metze@samba.org>
2011-12-22s3-auth rename auth_ntlmssp_prepare() -> auth_generic_prepare()Andrew Bartlett7-13/+13
This function handles more than NTLMSSP now, at least when we are an AD DC and so changing the name may avoid some confusion in the future. Andrew Bartlett Signed-off-by: Stefan Metzmacher <metze@samba.org>
2011-12-22s3-auth rename auth_ntlmssp_state -> auth_generic_stateAndrew Bartlett14-35/+35
This structure handles more than NTLMSSP now, at least when we are an AD DC and so changing the name may avoid some confusion in the future. Andrew Bartlett Signed-off-by: Stefan Metzmacher <metze@samba.org>
2011-12-22s3-rpc_server request the DCE_STYLE feature in ntlmssp_server_auth_startAndrew Bartlett1-0/+4
This is not used or honoured by NTLMSSP, but I hope to make this routine more generic in the future. Andrew Bartlett Signed-off-by: Stefan Metzmacher <metze@samba.org>
2011-12-22s3-netlogon: use dsgetdcname() instead of get_dc_name()Sumit Bose1-2/+7
Sometimes the domain parameter might not contain the NetBIOS name of the remote domain but the DNS name. Autobuild-User: Andreas Schneider <asn@cryptomilk.org> Autobuild-Date: Thu Dec 22 19:21:21 CET 2011 on sn-devel-104
generated by cgit (git 2.34.1) at 2024-07-06 11:59:22 +0000