summaryrefslogtreecommitdiff
path: root/source3
AgeCommit message (Collapse)AuthorFilesLines
2011-06-09server_id: Change format to vnn:pid.task_id, pid.task_id or pidAndrew Bartlett1-4/+14
This helps ensure the string cannot be ambiguous, while also ensuring that it remains simple in the non-cluster case. The asymmetry of reading get_my_vnn() but writing based on NONCLUSTER_VNN is acceptable because in the non-clustered case, they are equal, and in the clustered case we will print the full string. Andrew Bartlett
2011-06-09s3-param Remove special case for global_scope()Andrew Bartlett9-55/+17
There is no reason this can't be a normal constant string in the loadparm system. (Past reasons were that we didn't have lp_set_cmdline()) Andrew Bartlett
2011-06-09s3-param Remove special case for lp_workgroup()Andrew Bartlett6-61/+8
There is no reason this can't be a normal constant string in the loadparm system, now that we have lp_set_cmdline() to handle overrides correctly. Andrew Bartlett
2011-06-09s3-libsmbclient Use workgroup from libsmbclient caller for domain in credentialsAndrew Bartlett1-1/+1
This previously set the workgroup, which is a different thing, but would have been the default if no domain was specified). This more clearly sets the information from the credentials file into the matching field in the credentials structure. Andrew Bartlett
2011-06-09s3-lib Use domain in credentials file for domain in credentialsAndrew Bartlett1-1/+1
This previously set the workgroup, which is a different thing, but would have been the default if no domain was specified). This more clearly sets the information from the credentials file into the matching field in the credentials structure. Andrew Bartlett
2011-06-09lib/util Bring procid_str() into lib/util as server_id_string()Andrew Bartlett11-48/+24
This is needed for OpenChange, which prints Samba struct server_id values in debug messages. Andrew Bartlett
2011-06-09s3-lib Read and write the full struct server_id (except the unique_id)Andrew Bartlett1-19/+18
This is in preperation for making this code the common, only reader and writer of this structure. Andrew Bartlett
2011-06-09librpc/idr Use the Samba3 notify.idl in common.Andrew Bartlett5-92/+2
The extra fields in the structure that Samba4 does not use should not bother it. Andrew Bartlett Signed-off-by: Andrew Tridgell <tridge@samba.org>
2011-06-09server_id.idl: Bring server_id.idl in commonAndrew Bartlett4-34/+2
Andrew Bartlett Signed-off-by: Andrew Tridgell <tridge@samba.org>
2011-06-09s3-server_id change pid to hyperAndrew Bartlett1-1/+1
This matches Samba4's server_id. Signed-off-by: Andrew Tridgell <tridge@samba.org>
2011-06-09s3-server_id Add task_id to server_id to match Samba4Andrew Bartlett3-0/+9
This will allow this structure to be shared, and allow us to create a common messaging system between all Samba processes. Samba4 uses the task_id to indicate the different tasks within a single unix process. Andrew Bartlett Signed-off-by: Andrew Tridgell <tridge@samba.org>
2011-06-09s3-talloc Change TALLOC_MEMDUP() to talloc_memdup()Andrew Bartlett16-18/+17
Using the standard macro makes it easier to move code into common, as TALLOC_MEMDUP isn't standard talloc.
2011-06-09s3-talloc Change TALLOC_ZERO_ARRAY() to talloc_zero_array()Andrew Bartlett39-98/+97
Using the standard macro makes it easier to move code into common, as TALLOC_ZERO_ARRAY isn't standard talloc.
2011-06-09s3-talloc Change TALLOC_ZERO_P() to talloc_zero()Andrew Bartlett107-219/+218
Using the standard macro makes it easier to move code into common, as TALLOC_ZERO_P isn't standard talloc.
2011-06-09s3-talloc Change TALLOC_P() to talloc()Andrew Bartlett47-82/+81
Using the standard macro makes it easier to move code into common, as TALLOC_P isn't standard talloc.
2011-06-09s3-talloc Change TALLOC_ARRAY() to talloc_array()Andrew Bartlett79-169/+168
Using the standard macro makes it easier to move code into common, as TALLOC_ARRAY isn't standard talloc.
2011-06-09s3-talloc Change TALLOC_REALLOC_ARRAY() to talloc_realloc()Andrew Bartlett49-107/+106
Using the standard macro makes it easier to move code into common, as TALLOC_REALLOC_ARRAY isn't standard talloc. Andrew Bartlett
2011-06-09s3-talloc Remove unused TALLOC zeronull functions and macro definitionsAndrew Bartlett3-131/+0
These have been under #if 0 for a long time now. Andrew Bartlett
2011-06-09s3:auth/auth_samba4.c - remove unused variableMatthias Dieter Wallnöfer1-1/+0
Reviewed-by: Tridge
2011-06-09s3:passdb/pdb_samba4.c - remove unused variableMatthias Dieter Wallnöfer1-1/+0
Reviewed-by: Tridge
2011-06-09s3:passdb/pdb_samba4.c - fix a format specifier warningMatthias Dieter Wallnöfer1-1/+1
Reviewed-by: Tridge
2011-06-09Ensure when creating a directory, if we make any changes due to inheritance ↵Jeremy Allison1-0/+12
parameters, we update the stat returned. Autobuild-User: Jeremy Allison <jra@samba.org> Autobuild-Date: Thu Jun 9 00:46:39 CEST 2011 on sn-devel-104
2011-06-08Part 4 of bugfix for #8211 - "inherit owner = yes" doesn't interact ↵Jeremy Allison1-3/+2
correctly with "inherit permissions = yes" and POSIX ACLs We don't need to check mode bits as well as dev/ino to ensure we're in the same place.
2011-06-08s3:selftest: add a few more raw.* testsStefan Metzmacher1-1/+3
metze Autobuild-User: Stefan Metzmacher <metze@samba.org> Autobuild-Date: Wed Jun 8 18:57:01 CEST 2011 on sn-devel-104
2011-06-08s3:libsmb/cli_np_tstream: s/TSTREAM_CLI_NP_BUF_SIZE/TSTREAM_CLI_NP_MAX_BUF_SIZEStefan Metzmacher1-6/+6
This isn't the fixed buffer size anymore, as we use dynamic beffer it's just the maximum size. metze
2011-06-08s3:libsmb:cli_np_tstream: use dynamic talloc buffersStefan Metzmacher1-9/+30
Having 8192 bytes on an idle connection is a bit to much, so we better use dynamic buffers using talloc, which also avoids a memcpy in the common SMBtrans readv codepath. metze
2011-06-08s3-winbind: always use samlogon cache for wbinfo -r, even when caching isGünther Deschner1-4/+0
disabled. Guenther Autobuild-User: Günther Deschner <gd@samba.org> Autobuild-Date: Wed Jun 8 17:45:56 CEST 2011 on sn-devel-104
2011-06-08s3-winbindd: make sure we obey the -n switch also for samlogon cache access.Günther Deschner5-3/+17
Guenther Autobuild-User: Günther Deschner <gd@samba.org> Autobuild-Date: Wed Jun 8 14:44:31 CEST 2011 on sn-devel-104
2011-06-08s3-spoolss: fix -Wunused-but-set-variable build warning in ↵Günther Deschner1-0/+4
_spoolss_EnumPrintProcDataTypes(). We were in fact ignoring the error code here. Guenther
2011-06-08Part 3 of bugfix for #8211 - "inherit owner = yes" doesn't interact ↵Jeremy Allison1-17/+43
correctly with "inherit permissions = yes" and POSIX ACLs When changing ownership on a new file make sure we must have a valid stat struct before making the inheritance calls (as they may look at it), and if we make changes we must have a valid stat struct after them. Autobuild-User: Jeremy Allison <jra@samba.org> Autobuild-Date: Wed Jun 8 03:07:04 CEST 2011 on sn-devel-104
2011-06-07Part 2 of bugfix for #8211 - "inherit owner = yes" doesn't interact ↵Jeremy Allison1-0/+2
correctly with "inherit permissions = yes" and POSIX ACLs When changing ownership on a new file make sure we also change the returned stat struct to have the correct uid.
2011-06-07Part 1 of bugfix for #8211 - "inherit owner = yes" doesn't interact ↵Jeremy Allison1-0/+2
correctly with "inherit permissions = yes" and POSIX ACLs When changing ownership on a new directory make sure we also change the returned stat struct to have the correct uid.
2011-06-07Fix re-opened bug 8083 - "inherit owner = yes" doesn't interact correctly ↵Jeremy Allison1-4/+17
with vfs_acl_xattr or vfs_acl_tdb module. Fix incorrect interaction when all of "inherit permissions = yes" "inherit acls = yes" "inherit owner = yes" are set. Found by Björn Jacke. Thanks Björn ! Autobuild-User: Jeremy Allison <jra@samba.org> Autobuild-Date: Tue Jun 7 22:32:18 CEST 2011 on sn-devel-104
2011-06-07s3:libsmb/cli_np_tstream: use larger buffers to avoid a bug NT4 servers (bug ↵Stefan Metzmacher1-2/+17
#8195) NT4 servers return NT_STATUS_PIPE_BUSY if we try a SMBtrans and the SMBwriteX before hasn't transmited the whole DCERPC fragment. W2K and above is happy with that. As a result we try to match the behavior of Windows and older Samba clients, they use write and read buffers of 4280 bytes instead of 1024 bytes. On Windows only the SMBtrans based read uses 1024 (while we also use 4280 there). metze Autobuild-User: Stefan Metzmacher <metze@samba.org> Autobuild-Date: Tue Jun 7 20:25:32 CEST 2011 on sn-devel-104
2011-06-07s3:idmap_autorid: fail initialization if the domain is not "*"Michael Adam1-0/+8
autorid can only be used as a backend for the default idmap configuration. Autobuild-User: Michael Adam <obnox@samba.org> Autobuild-Date: Tue Jun 7 19:13:18 CEST 2011 on sn-devel-104
2011-06-07s3:idmap_autorid: use "idmap config <DOMAIN> : rangesize" instead of ↵Michael Adam1-1/+9
"autorid:rangesize"
2011-06-07s3:idmap_autorid: add a talloc_stackframe() to idmap_autorid_initialize()Michael Adam1-5/+6
2011-06-07s3-auth Use loadparm_init_s3() to get an lp_ctx for auth_samba4Andrew Bartlett1-15/+2
This avoids loading the smb.conf twice. Andrew Bartlett
2011-06-07s3: Remove unused variablesVolker Lendecke1-2/+0
Autobuild-User: Volker Lendecke <vlendec@samba.org> Autobuild-Date: Tue Jun 7 00:42:51 CEST 2011 on sn-devel-104
2011-06-06s3-waf: Fix pthreadpool build which needs librt now.Andreas Schneider1-1/+1
Autobuild-User: Andreas Schneider <asn@cryptomilk.org> Autobuild-Date: Mon Jun 6 23:31:09 CEST 2011 on sn-devel-104
2011-06-06s3: Remove a pointless if-statementVolker Lendecke1-3/+1
We are here only if we have more than one num_pending Autobuild-User: Volker Lendecke <vlendec@samba.org> Autobuild-Date: Mon Jun 6 18:21:17 CEST 2011 on sn-devel-104
2011-06-06s3: Fix two debug messagesVolker Lendecke1-2/+2
Autobuild-User: Volker Lendecke <vlendec@samba.org> Autobuild-Date: Mon Jun 6 14:11:06 CEST 2011 on sn-devel-104
2011-06-06s3/pthreadpool: replace bad portable gettimeofday by clock_gettimeBjörn Jacke1-4/+2
Signed-off-by: Stefan Metzmacher <metze@samba.org>
2011-06-06s3-s4-param: Add hooks for parametric options in the s3/s4 glue layerAndrew Bartlett1-0/+26
Autobuild-User: Andrew Bartlett <abartlet@samba.org> Autobuild-Date: Mon Jun 6 10:48:53 CEST 2011 on sn-devel-104
2011-06-06s3-passdb use new loadparm_init_s3 rather than reloading the smb.confAndrew Bartlett1-14/+2
2011-06-06lib/util use modules_path(), data_path() and shlib_ext() from source3Andrew Bartlett6-47/+7
This brings these helpful utility functions in common, as they are not based on either loadparm system. (The 'modules dir' parameter from Samba4 will shortly be removed, so there is no loss in functionality) Andrew Bartlett
2011-06-06s3-lib Remove unused lib_path()Andrew Bartlett2-14/+0
2011-06-06s4-param Add hook between Samba3 and Samba4 loadparm systems.Andrew Bartlett4-4/+77
In the top level build, this allows calls to code that requires a lpcfg_ style loadparm_context, while using the global parameters loaded from the source3 loadparm code. Andrew Bartlett
2011-06-06s3-param always allow the realm parameterAndrew Bartlett1-2/+0
2011-06-05s3: Make use of name_resolve_bcast in nmblookupVolker Lendecke1-21/+3
generated by cgit (git 2.34.1) at 2024-10-31 04:46:34 +0000