summaryrefslogtreecommitdiff
path: root/source3
AgeCommit message (Collapse)AuthorFilesLines
2012-06-02build: Remove check for res_ninit (Revert "s3: Check for res_ninit")Andrew Bartlett1-8/+0
This reverts commit 4f6b1e8c81776cf1fa386574e60e54fe6b4fe82e because I cannot find any use of this configure check, and it is one of the differences between the WAF and autoconf builds. Andrew Bartlett
2012-06-02build: Show extra configure results found by WAF as wellAndrew Bartlett1-1/+3
This may assist in debugging a difference in a configure test on the build farm. Andrew Bartlett Autobuild-User: Andrew Bartlett <abartlet@samba.org> Autobuild-Date: Sat Jun 2 09:46:09 CEST 2012 on sn-devel-104
2012-06-02build: Check correctly for sendfile (missing .h in header)Andrew Bartlett1-1/+1
This will hopefully fix the build on SLES8, which does not support 64-bit sendfile. Andrew Bartlett
2012-06-02build: Always attempt to build posix ACLsAndrew Bartlett1-8/+3
These are on more systems than just linux. If the configure test passes then assume it is available. Andrew Bartlett
2012-06-02lib/replace: xattr wrappers in lib/replace rather than source3/lib/system.cAndrew Bartlett5-790/+19
This also moves all the still-used configure tests etc. The unused OSF API is also removed at this time. Andrew Bartlett
2012-06-02s3: Same fix as 8576256, this time for fgetxattrVolker Lendecke1-1/+1
Signed-off-by: Jeremy Allison <jra@samba.org> Autobuild-User: Jeremy Allison <jra@samba.org> Autobuild-Date: Sat Jun 2 02:12:31 CEST 2012 on sn-devel-104
2012-06-01s3: Avoid a lot of calls to serverid_exists()Volker Lendecke1-1/+1
Signed-off-by: Stefan Metzmacher <metze@samba.org> Autobuild-User: Stefan Metzmacher <metze@samba.org> Autobuild-Date: Fri Jun 1 18:58:30 CEST 2012 on sn-devel-104
2012-06-01waf: check for krb5_create_checksum and krb5_creds.flags for some Heimdal ↵Alexander Bokovoy1-0/+12
versions Signed-off-by: Andreas Schneider <asn@samba.org> Autobuild-User: Andreas Schneider <asn@cryptomilk.org> Autobuild-Date: Fri Jun 1 11:23:21 CEST 2012 on sn-devel-104
2012-06-01build: Add automatic compare of config.h files to recursive waf buildAndrew Bartlett1-1/+6
This uses the fact that we have both build systems running at the same time. The krb5 checks are skipped because we typically are comparing internal Heimdal with the system krb5, so they do not make sense. The required checks for krb5 are pretty well understood in any case, as we have a limited set of supported libraries. Andrew Bartlett
2012-05-31Forward port of Richard Sharpe's <realrichardsharpe@gmail.com> fix for bug ↵Jeremy Allison5-4/+16
#8970 - Possible memory leaks in the samba master process.
2012-05-31We are triggering the cleanup_timeout_fn() too often, on exiting when an ↵Jeremy Allison1-11/+4
smbd is idle. Calls to exit_server_cleanly() should be treated as a "clean" shutdown, and not trigger the master smbd to call cleanup_timeout_fn.
2012-05-31s3:smbd: use server_messaging_context() instead of sconn->msg_ctx in ↵Stefan Metzmacher1-2/+3
exit_server_common() sconn is not available in the parent anymore. Thanks to Volker Lendecke <vl@samba.org> for finding this! metze Autobuild-User: Stefan Metzmacher <metze@samba.org> Autobuild-Date: Thu May 31 18:08:06 CEST 2012 on sn-devel-104
2012-05-31s3:vfs_hpuxacl: remove unused file_find_fd() callsStefan Metzmacher1-18/+2
metze
2012-05-31s3: Fix some 64-bit warningsVolker Lendecke2-4/+4
Signed-off-by: Stefan Metzmacher <metze@samba.org> Autobuild-User: Stefan Metzmacher <metze@samba.org> Autobuild-Date: Thu May 31 10:06:56 CEST 2012 on sn-devel-104
2012-05-31build: rename build targets smbclient -> smbclient4 and smbclient3 -> smbclientMichael Adam1-1/+1
Autobuild-User: Michael Adam <obnox@samba.org> Autobuild-Date: Thu May 31 06:36:55 CEST 2012 on sn-devel-104
2012-05-31s3:selftest: add a binary mapping for smbclient4Michael Adam1-2/+2
2012-05-31build: rename build targets nmblookup -> nmblookup4 and nmblookup3 -> nmblookupMichael Adam1-1/+1
2012-05-31s3:selftest: add a binary mapping for nmblookup4Michael Adam1-2/+2
2012-05-31s3:selftest: improve strange linebreaks for blackbox tests in tests.py for ↵Michael Adam1-22/+31
readability
2012-05-31s3:selftest: introduce a variable for binpath('dbwrap_tool') in tests.pyMichael Adam1-2/+3
2012-05-31s3:selftest: introduce a variable for binpath('ntlm_auth3') in tests.pyMichael Adam1-4/+5
2012-05-31s3:selftest: introduce a variable for binpath('smbtorture3') in tests.pyMichael Adam1-4/+5
2012-05-31s3:selftest: introduce a variable for binpath('net') in tests.pyMichael Adam1-9/+10
2012-05-31s3:selftest: introduce a variable for binpath('wbinfo') in tests.pyMichael Adam1-5/+6
to remove explicit calls to binpath('wbinfo')
2012-05-31s3:selftest: introduce a variable for binpath('smbclient3') to test.pyMichael Adam1-15/+17
to remove manual calls to binpath("smbclient3")
2012-05-31s3:build: fix some spacing in wscript_buildMichael Adam1-6/+6
2012-05-31Stop spamming the logs with "Could not remove pid XX from serverid.tdb" ↵Jeremy Allison1-15/+18
messages and initiating the cleanup function on every process death. We now have many sub-processes from smbd that don't serve SMB1/SMB2 requests and don't register themselves in the serverid.tdb. Only initiate the cleanup from processes that were explicitly in the child list. Autobuild-User: Jeremy Allison <jra@samba.org> Autobuild-Date: Thu May 31 04:44:09 CEST 2012 on sn-devel-104
2012-05-30Fix bad bugfix for bug #8910 - resolve_ads() code can return zero addresses ↵Ira Cooper1-1/+1
and miss valid DC IP addresses Original code incorrectly used a while() instead of a for() loop. We need to iterate over the entire array here. Autobuild-User: Jeremy Allison <jra@samba.org> Autobuild-Date: Wed May 30 23:29:03 CEST 2012 on sn-devel-104
2012-05-30Fix metze's complaint about the bugfix for bug #8953 - winbind can hang as ↵Jeremy Allison1-7/+0
nbt_getdc() has no timeout. This code explicitly isn't needed as the tevent code will take care of this.
2012-05-30s3:libsmb: use nb_connect_send() directly instead of doing a 0 timer for ↵Stefan Metzmacher1-4/+9
port 139 metze Autobuild-User: Stefan Metzmacher <metze@samba.org> Autobuild-Date: Wed May 30 20:51:51 CEST 2012 on sn-devel-104
2012-05-30s3-build: Fix configure checks for HeimdalAndrew Bartlett1-15/+15
A series of small errors meant that all Heimdal versions became unsupported, when for the autoconf build, some versions have what we need. Andrew Bartlett
2012-05-30build: Make gss_wrap_iov mandatory for krb5 buildAndrew Bartlett1-0/+5
This isn't in Heimdal 1.1, so we still fail on that version, but at least we fail for the right reasons. Andrew Bartlett
2012-05-30s3:utils: use cli_tree_connect() instead of cli_tcon_andx()Stefan Metzmacher1-1/+1
metze Autobuild-User: Stefan Metzmacher <metze@samba.org> Autobuild-Date: Wed May 30 12:54:05 CEST 2012 on sn-devel-104
2012-05-30s3:libsmb: use cli_tree_connect() instead of cli_tcon_andx()Stefan Metzmacher1-2/+2
cli_tree_connect() is more generic and uses what the server supports metze
2012-05-30s3:libsmb: fallback to SMBtcon for old serversStefan Metzmacher1-1/+15
metze
2012-05-30s3-loadparm: Swap synonyms of max/min protocol to server max/min protocolAndrew Bartlett1-4/+4
This matches the lib/param code, as is a seperate parameter for the client there. Andrew Bartlett Autobuild-User: Andrew Bartlett <abartlet@samba.org> Autobuild-Date: Wed May 30 06:04:41 CEST 2012 on sn-devel-104
2012-05-30s3-build: We do not have CHARSET modules any moreAndrew Bartlett2-8/+2
2012-05-30lib/param: Put common FN_ macros into param_functions.cAndrew Bartlett4-264/+19
This will in turn make it possible to put the actual parameter definitions in common. Andrew Bartlett
2012-05-30s3-param: Use same function name for "max xmit" as lib/paramAndrew Bartlett3-3/+3
Again, this helps with merging the FN_ list. Andrew Bartlett
2012-05-30s3-param: Use same variable names as lib/paramAndrew Bartlett1-10/+10
Again, this helps with merging the FN_ list. Andrew Bartlett
2012-05-30s3-param: Import parameters from lib/param to make this list commonAndrew Bartlett1-0/+26
This will allow the list of FN_ macros to be made a common .c file. Andrew Bartlett
2012-05-30s3-param: Rename lp_dns_proxy() -> lp_wins_dns_proxy() for clarityAndrew Bartlett4-4/+4
This avoids some confusion now we have a DNS server as well. Andrew Bartlett
2012-05-30param: Sort global param functions macros to ease the s3/s4 mergeAndrew Bartlett1-236/+228
This makes it easier to them merge these two function lists without changing the meaning of the output. Andrew Bartlett
2012-05-30lib/param: Harmonise 'password server' parameter between s3 and s4Andrew Bartlett1-0/+2
2012-05-30s3-build: Remove build of libtdb.so from the autoconf buildAndrew Bartlett2-68/+3
We now either link tdb statically or we use the system provided tdb This means that we now only have one build system for externally-available tdb, which in turn ensures we have a consistent shared library built as libtdb.so Andrew Bartlett
2012-05-30s3-build: Remove build of libtalloc.so from the autoconf buildAndrew Bartlett2-65/+3
We now either link talloc statically or we use the system provided talloc This means that we now only have one build system for externally-available talloc, which in turn ensures we have a consistent shared library built as libtalloc.so Andrew Bartlett
2012-05-30s3-iconv: Remove unused script/gen-8bit-gap.shAndrew Bartlett5-154/+1
We decided to rely on a system iconv rather than these modules. Andrew Bartlett
2012-05-30build: Provide .pc file for libsmbsharemodesAndrew Bartlett2-1/+12
This is not the exact same file as the autoconf build, because of the differnet processing semantics. Andrew Bartlett
2012-05-30build: Provide .pc file for libnetapiAndrew Bartlett2-1/+12
This is not the exact same file as the autoconf build, because of the differnet processing semantics. Andrew Bartlett
2012-05-29s3:smb2_ioctl: verify credit chargeStefan Metzmacher1-0/+25
Based on a patch from Christian Ambach <ambi@samba.org>. metze Autobuild-User: Stefan Metzmacher <metze@samba.org> Autobuild-Date: Tue May 29 18:55:29 CEST 2012 on sn-devel-104
generated by cgit (git 2.34.1) at 2024-11-09 22:31:09 +0000