summaryrefslogtreecommitdiff
path: root/source3
AgeCommit message (Collapse)AuthorFilesLines
2008-08-11netapi: add skeleton for NetUserModalsGet and NetUserModalsSet.Günther Deschner3-0/+140
Guenther (This used to be commit 5648145bec3bd24ecedea24a8834ac6768bfc640)
2008-08-11re-run make idl.Günther Deschner3-16/+171
Guenther (This used to be commit 36c5de4702c03bd71d689aaecea87168133021c2)
2008-08-11netapi: add NetUserModalsSet and NetUserModalsGet to IDL.Günther Deschner1-0/+75
Guenther (This used to be commit 2af33ceeb8bece347d67e27a662a7cd0a58f75f8)
2008-08-11doserr: add WERR_MEMBER_IN_ALIAS.Günther Deschner2-0/+2
Guenther (This used to be commit b62de0d1944de3dba55e182e0d8eb7c6ca5ec045)
2008-08-11netapi: add NetApiBufferAllocate.Günther Deschner2-0/+33
Guenther (This used to be commit 99cc8f023b4ad9210b677e11371f404048752031)
2008-08-11netapi: add ConvertStringSidToSid().Günther Deschner2-0/+41
Guenther (This used to be commit 36f1e45e4ec295115f1ba39ec7ad3690a96dac3e)
2008-08-11netapi: generate the netapi testsuite makefile.Günther Deschner1-0/+1
Guenther (This used to be commit a2247a5b19237291cec8c6a873652d78d55aaeb7)
2008-08-11fix build warning.Günther Deschner1-1/+1
Guenther (This used to be commit 85021d6a459c957cc276a93c3515029244f52677)
2008-08-10Make events robust against their event_context being freedVolker Lendecke1-5/+28
(This used to be commit 3d4e7b29c235e329aaea4fa2c2078df0ce3e59eb)
2008-08-10fix smb_len calculation for chained requestsVolker Lendecke1-3/+5
I think chain_reply() is one of the most tricky parts of Samba. This recursion needs to go away, we need to sequentially walk the chain list. (This used to be commit af2b01d85188d2301580643f7e862e3e3988aadc)
2008-08-10Fix andx offset calculation for more than 2 chained requestsVolker Lendecke1-1/+7
Untested code is broken code.... Test follows later, it's quite an intrusive change to libsmb/ (This used to be commit 0ff16e8573f3c312f10fc723648319fa1f514ac0)
2008-08-10Remove an unused variable, process.c has its static copyVolker Lendecke1-2/+0
(This used to be commit 59136544ec16b6ceb14a75259aedd22856832bf1)
2008-08-09nmbd: add support for delayed initial samlogon packages.Michael Adam1-6/+86
The hosts or networks configured with "init logon delayed hosts" have their initial samlogon packages (empty username) delayed by the value configured with "init logon delay" (defaulting to 100 milliseconds). This gives the administrator some control over what clients would consider the preferred logon server: they choose the server that repsonds most quickly. Michael (This used to be commit d52b9beede1fb14e1d7e3acd9765d6cd14dfcc3d)
2008-08-09nmbd_packets: make queue_packet() public.Michael Adam2-3/+2
Michael (This used to be commit 363eb90ce8380ce1bbc74673936ba1e6d7eee23b)
2008-08-09loadparm: add two parameters "init logon delay hosts" and "init logon delay"Michael Adam2-0/+26
"init logon delays hosts" takes a list of hosts names or addresses or networks for which the initial SAMLOGON reply should be delayed (so other DCs get preferred by XP workstations if there are any). This option takes the same type of list as "hosts allow" does. "init logon delay" allows one to configure the delay for the hosts configured for delayed initial samlogon with "init logon delayed hosts". The value is interpreted as milliseconds. The default value is 100. This commit only introduces the parameters. They will be activated in a subsequent commit. Michael (This used to be commit f7c1f85438f7e0da2a96e3fc8f774f8c6936370e)
2008-08-09lib/access: make list_match() public.Michael Adam2-1/+3
Michael (This used to be commit 742bedce417c666b5e91d8d0a7dc7682dc62eba2)
2008-08-09lib/access: make client_match() public.Michael Adam2-1/+2
Michael (This used to be commit 1b2dec93b635dfd23af78a370c223ea2dd486aa7)
2008-08-08One more build fix. Ensure we have KRB5_AUTH_CONTEXT_USE_SUBKEY defined ↵Jeremy Allison1-3/+3
before we compile the new code. Jeremy. (This used to be commit 7686752c5b015b15a6729631ba4aeedd25ebc659)
2008-08-08Try and fix the build for systems that don't have ↵Jeremy Allison2-3/+4
krb5_auth_con_set_req_cksumtype(). Jeremy. (This used to be commit 8598e7b06ec57ca6fcde863270e6bb0e2de9993e)
2008-08-08Merge branch 'v3-3-test' of ssh://jra@git.samba.org/data/git/samba into ↵Jeremy Allison2-6/+21
v3-3-test (This used to be commit 5b3579b14cd5ea6e67ff3c91f5bed155d944c049)
2008-08-08Add Derrick Schommer's <dschommer@F5.com> kerberos delegation patch. SomeJeremy Allison3-3/+186
work by me and advice by Love. Jeremy. (This used to be commit ecc3838e4cb5d0c0769ec6d9a34a877ca584ffcc)
2008-08-08build: fix a no previous prototype warning when building without ldap/gssapiaMichael Adam1-6/+6
move prototype of dns_create_update_request() to appropriate section in dns.h Michael (This used to be commit 0fba9549894affa8e2ea0b7fd15812f56f3319a3)
2008-08-08libnet samsync ldif: fix the build without LDAP.Michael Adam1-0/+15
Michael (This used to be commit 32df05bd1f49f2290ad69f84d5a47207b1469629)
2008-08-08using NGROUPS_MAX instead of 32 for the max group value in rep_initgroups() ↵Yannick Bergeron1-1/+1
subroutine in lib/replace/replace.c (This used to be commit 13b1a232d2fe05ae3e924ea2503d05ff5084146e)
2008-08-08Add simple async wrappers around send, recv and connectVolker Lendecke4-0/+721
To be used later :-) (This used to be commit 0d161d336ab9eeccd90d19ef1473646c3008864a)
2008-08-07Fix bug #5675 with a varient of Tim Waugh's patch,Jeremy Allison3-4/+4
as proposed by James Peach. Jeremy. (This used to be commit 5c27ad75836136c39774c9456d63f46fa62e281f)
2008-08-07Fix "might be used uninitialized" warnings.Jeremy Allison2-3/+4
Jeremy. (This used to be commit 5abd12eec1c9b6d30af5ec1ba16c0922e78d5bea)
2008-08-07Fix a build failure on host sunXVolker Lendecke1-1/+1
(This used to be commit 30b5be872501dc87380fd10084aacda13a308ac8)
2008-08-06Solve an IBM XL C/C++ compiler error encountered in get_exit_code() ↵Yannick Bergeron1-1/+2
auth_errors array initialization in client/smbspool.c (This used to be commit b45e7fabc64e699e4fa013ef15f98a004dae3f32)
2008-08-06libnetapi: fix build of shared library after libnet_join changes.Michael Adam1-1/+2
This needs create_builtin_administrators() and create_builtin_users() from token_utils now. Did not pop up because the only users of the shared lib currently are the examples in lib/netapi/examples/ which are not automatically built. Michael (This used to be commit 8dca23a5597a717c7f79bab0494122e71528272b)
2008-08-06fixed permissions on ctdb databasesAndrew Tridgell1-0/+5
(This used to be commit 123fc3980a83d956bffaa689f3af81bbf81ce1c1)
2008-08-06fixed a fd leak when trying to regain contact to a domain controllerAndrew Tridgell1-0/+1
in winbind When a w2k3 DC is rebooted the 139/445 ports come up before the udp/389 cldap port. During this brief period, winbind manages to connect to 139/445 but not to udp 389. It then enters a tight loop where it leaks one fd each time. In a couple of seconds it runs out of file descriptors, and leaves winbind crippled after the DC does finally come up (This used to be commit 57187cafbcc053e75bb54750494df9feabe3a738)
2008-08-05dbwrap: add comment describing behaviour of dbwrap_change_int32_atomic().Michael Adam1-0/+7
Michael (This used to be commit f8f21c8e3922806230e240cb54205fc2db7a3619)
2008-08-05secrets: fix replacemend random seed generator (security issue).Michael Adam1-2/+6
This is a regression introduced by the change to dbwrap. The replacement dbwrap_change_int32_atomic() does not correctly mimic the behaviour of tdb_change_int32_atomic(): The intended behaviour is to use *oldval as an initial value when the entry does not yet exist in the db and to return the old value in *oldval. The effect was that: 1. get_rand_seed() always returns sys_getpid() in *new_seed instead of the incremented seed from the secrets.tdb. 2. the seed stored in the tdb is always starting at 0 instead of sys_getpid() + 1 and incremented in subsequent calls. In principle this is a security issue, but i think the danger is low, since this is only used as a fallback when there is no useable /dev/urandom, and this is at most called on startup or via reinit_after_fork. Michael (This used to be commit bfc5d34a196f667276ce1e173821db478d01258b)
2008-08-05dbwrap: add comment describing behaviour of dbwrap_change_uint32_atomic().Michael Adam1-0/+7
Michael (This used to be commit 7edfb54c865ddcfd5cdcc8c2184b96aaac2d2ec0)
2008-08-05idmap_tdb2: fix a race condition in idmap_tdb2_allocate_id().Michael Adam1-2/+6
The race is a regression introduced by the change to dbwrap. It might have led to two concurrent processes returning the same id. This fix is achieved by changing dbwrap_change_uint32_atomic() to match the original behaviour of tdb_change_uint32_atomic(), which is the following: *oldval is used as initial value when the value does not yet exist and that the old value should be returned in *oldval. dbwrap_change_uint32_atomic() is used (only) in idmap_tdb2.c, to get new ids. Michael (This used to be commit 72bd83fea7572a6202027b200d192c05023aa633)
2008-08-05registry: use _bystring wrappers to dbwrap_trans_(store|delete).Michael Adam1-6/+3
Michael (This used to be commit 103ce6c9e94ce74e616fe922f2584fd46ae1f3f8)
2008-08-05Building cifs.upcall is giving this build warning:Steve French1-1/+1
client/cifs.upcall.c:205: warning: function declaration isn’t a prototype This patch fixes this by properly declaring usage() args as void. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@samba.org> (This used to be commit 148a012421cdd875167e708c5dfa771d97bf9856)
2008-08-05cifs.upcall: fix manpage and commentsSteve French1-4/+4
The "cifs.resolver" key type has been changed to "dns_resolver". Fix the comments at the top of cifs.upcall and the manpage accordingly. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@samba.org> --- docs-xml/manpages-3/cifs.upcall.8.xml | 4 ++-- source/client/cifs.upcall.c | 8 ++++---- 2 files changed, 6 insertions(+), 6 deletions(-) (This used to be commit 24a93d03c2ca4e718968e2024604e0f398c96659)
2008-08-05Backing out most of changeset 5222b8db3fb692e5071bfd1b41849a8eb0a17995Steve French1-2/+5
(so parsing for domain parameter in mount.cifs matches online help) and rephrasing original code to make it more clear. The check for "domain" was meant to allow for "dom" or "DOM" and the option ("dom") described in the help (e.g. "/sbin/mount.cifs -?") is the shorter ("dom") form. The reason that the string we compare against is larger was to improve readability (we could compare against "dom" but note /* "domain" or "DOMAIN" or "dom" or "DOM" */ but it seemed terser to just show the larger string in the strcmp target. The change to "workgoup" from workg* (anything which begins with "workg" doesn't matter - it is a minor behavior change - but probably few scripts depend on the "alias" for this option). Rework code so that it is clearer what we are comparing against. (This used to be commit 92fad0fc537e75c726d5d6794dd0c4fd61edca2d)
2008-08-04libnet_keytab: fix the build with heimdalStefan Metzmacher1-6/+38
metze (This used to be commit ba18af00cc79a4e92372d3c1151061f200bc0655)
2008-08-04clikrb5: don't use krb5_keyblock_init() when no salt is specifiedStefan Metzmacher1-35/+30
If the caller wants to create a key with no salt we should not use krb5_keyblock_init() (only used when using heimdal) because it does sanity checks on the key length. metze (This used to be commit c83de77b750837a110611d7023c4cf71d2d0bab1)
2008-08-01cli_request_new() already gave use the req, remove a pointless function callVolker Lendecke1-2/+0
(This used to be commit 08e97bd369ebe3ab1fd92433b168585faea92c68)
2008-08-01Fix a typoVolker Lendecke1-5/+5
(This used to be commit 37bd2815c70176046bbe0232222b9f59dfa159c4)
2008-08-01libnet dssync: start memory allocation cleanup: use tmp ctx in libnet_dssync().Michael Adam1-2/+9
Don't leak temporary data to callers but use a temporary context that is freed at the end. Michael (This used to be commit 2d98ad57f56ddd4318bc721929a3ca9ede189a25)
2008-08-01libnet dssync: fix memory allocation for error/result messages.Michael Adam2-11/+11
Use the libnet_dssync_context as a talloc context for the result_message and error_message string members. Using the passed in mem_ctx makes the implicit assumption that mem_ctx is at least as long-lived as the libnet_dssync_context, which is wrong. Michael (This used to be commit 635baf6b7d2a1822ceb48aa4bc47569ef19d51cc)
2008-08-01dssync keytab: add comment header explaining add_to_keytab_entries().Michael Adam1-0/+4
Michael (This used to be commit 1072bd9f96ff3853e5ff58239123fc8c76a99063)
2008-08-01libnet dssync: add my C after dssync keytab changes.Michael Adam4-0/+4
Michael (This used to be commit 9391aec8d4600c685b14d3cd1624f8758f2cc80d)
2008-08-01vampire keytab: add command line switch --clean-old-entries .Michael Adam3-0/+3
This allows to control cleaning the keytab. It will only clean old occurences of keys that are replicated in this run. So if you want to ensure things are cleaned up, combine this switch with --force-full-repl or --single-obj-repl (+dn list). Michael (This used to be commit 21385e1c635ea67215eb1da90e7dca97ae2f5d56)
2008-08-01dssync: add clean_old_entries flag to dssync_ctx.Michael Adam3-0/+3
Initialize it to false. And pass it down to the libnet_keytab context in libnet_dssync_keytab.c:keytab_startup(). Unused yet. Michael Note: This might not be not 100% clean design to put this into the toplevel dssync context while it is keytab specific. But then, on the other hand, other imaginable backends might want to use this flag, too... (This used to be commit 12e884f227e240860e49f9e41d8c1f45e10ad3be)