summaryrefslogtreecommitdiff
path: root/source4/auth/gensec
AgeCommit message (Collapse)AuthorFilesLines
2010-05-20s4:auth Change auth_generate_session_info to take flagsAndrew Bartlett1-1/+7
This allows us to control what groups should be added in what use cases, and in particular to more carefully control the introduction of the 'authenticated' group. In particular, in the 'service_named_pipe' protocol, we do not have control over the addition of the authenticated users group, so we key of 'is this user the anonymous SID'. This also takes more care to allocate the right length ptoken->sids Andrew Bartlett
2010-05-20s4:auth Allow the operational module to get a user's tokenGroups from authAndrew Bartlett2-1/+2
This creates a new interface to the auth subsystem, to allow an auth_context to be created from the ldb, and then tokenGroups to be calculated in the same way that the auth subsystem would. Andrew Bartlett
2010-05-18Finish removal of iconv_convenience in public API's.Jelmer Vernooij5-12/+3
2010-05-14s4:gensec expose gensec_set_target_principal for use outside GENSECAndrew Bartlett4-3/+8
This allows for the rare case where the caller knows the target principal. The check for lp_client_use_spnego_principal() is moved to the spengo code to make this work. Andrew Bartlett
2010-05-02s4:credentials Make the CCACHE in credentials depend on the things that built itAndrew Bartlett2-1/+12
This means that we consider the ccache only as reliable as the least specified of the inputs we used. This means that we will regenerate the ccache if any of the inputs change. Andrew Bartlett
2010-04-27s4:gensec Use a different form of 'name' in GSSAPI import_name()Andrew Bartlett1-3/+3
The idea here is to make it not dependent on the system's default realm. Andrew Bartlett
2010-04-14s4:auth Change auth_generate_session_info to take an auth contextAndrew Bartlett4-4/+24
The auth context was in the past only for NTLM authentication, but we need a SAM, an event context and and loadparm context for calculating the local groups too, so re-use that infrustructure we already have in place. However, to avoid problems where we may not have an auth_context (in torture tests, for example), allow a simpler 'session_info' to be generated, by passing this via an indirection in gensec and an generate_session_info() function pointer in the struct auth_context. In the smb_server (for old-style session setups) we need to change the async context to a new 'struct sesssetup_context'. This allows us to use the auth_context in processing the authentication reply . Andrew Bartlett
2010-04-11s4:auth Remove event context from anonymous_session()Andrew Bartlett1-1/+1
This should always return a simple structure with no need to consult a DB, so remove the event context, and simplfy to call helper functions that don't look at privilages. Andrew Bartlett
2010-04-08pynet: Create a net class.Jelmer Vernooij1-1/+1
2010-04-06s4-waf: mark the wscript files as python so vim/emacs knows how to highlight ↵Andrew Tridgell1-0/+2
them
2010-04-06s4-waf: enable the pc_files in the build rulesAndrew Tridgell1-1/+1
2010-04-06build: fixed the build without sasl librariesAndrew Tridgell1-1/+2
We need to only enable the cyrus_sasl module if we have sasl/sasl.h
2010-04-06build: waf quicktest nearly worksAndrew Tridgell1-5/+1
Rewrote wafsamba using a new dependency handling system, and started adding the waf test code
2010-04-06build: commit all the waf build files in the treeAndrew Tridgell1-0/+63
2010-04-05Revert "s4:gensec_gssapi.c - make sure that "GSS_C_DELEG_POLICY_FLAG" is ↵Matthias Dieter Wallnöfer1-5/+0
available" This reverts commit 3e091a82167f51b7d9abf00755bede9354932c6b. This should be fixed through the new build system when it lands in "master".
2010-03-30s4:gensec_gssapi.c - make sure that "GSS_C_DELEG_POLICY_FLAG" is availableMatthias Dieter Wallnöfer1-0/+5
FreeBSD 7.2 needs this.
2010-03-29pytalloc: allow for using a system libtalloc-dev with pytallocAndrew Tridgell1-1/+1
When we have a system talloc library, we still need to grab pytalloc.h from lib/talloc. We don't want to just use -Ilib/talloc, as otherwise we'll get the in-tree talloc.h which may not be compatible with the system talloc.h So we need to give the path to pytalloc.h
2010-03-26libutil: moved the networking defines to util_net.hAndrew Tridgell2-0/+2
These were causing thousands of warnings on solaris8
2010-03-08s4-gensec: Fixed wrong usage of error_string.Andreas Schneider1-1/+1
Signed-off-by: Stefan Metzmacher <metze@samba.org>
2010-02-26s4:python Add bindings to set GENSEC flags on credentials in pythonAndrew Bartlett1-0/+9
This should allow these to be manipulated by python scripts that need encrypted connections. Andrew Bartlett
2010-02-26s4-krb5: propogate errors from a lot more kerberos functionsAndrew Tridgell2-9/+15
We need to be able to give sensible error messages when a kerberos calls fails. This propogates the kerberos error up the stack to the caller. Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
2010-02-23s4:cleanup remove unused schannel ldb codeSimo Sorce1-67/+0
2010-02-23s4:schannel merge code with s3Simo Sorce2-22/+5
After looking at the s4 side of the (s)channel :) I found out that it makes more sense to simply make it use the tdb based code than redo the same changes done to s3 to simplify the interface. Ldb is slow, to the point it needs haks to pre-open the db to speed it up, yet that does not solve the lookup speed, with ldb it is always going to be slower. Looking through the history it is evident that the schannel database doesn't really need greate expanadability. And lookups are always done with a single Key. This seem a perfet fit for tdb while ldb looks unnecessarily complicated. The schannel database is not really a persistent one. It can be discared during an upgrade without causing any real issue. all it contains is temproary session data.
2010-02-13s4-auth: use TYPESAFE_QSORT() in gensecAndrew Tridgell1-1/+2
2010-02-09s4:Remove "Py_RETURN_NONE" compatibility codeMatthias Dieter Wallnöfer1-4/+0
This was needed only by Python 2.3 which we no longer support.
2009-12-24s4:gensec: change gensec_update_send/recv to tevent_reqStefan Metzmacher3-58/+83
metze
2009-12-16s4:gensec: allow clearing local and remote address by passing NULLStefan Metzmacher1-0/+10
metze
2009-12-16s4-gensec: Remove obsolete socket_address vars and fns.Andreas Schneider2-35/+0
2009-12-16s4-gensec: Replace gensec_get_peer_addr with new tsocket based fn.Andreas Schneider4-27/+21
2009-12-16s4-gensec: Replace gensec_set_peer_addr with new tsocket based fn.Andreas Schneider2-11/+0
2009-12-16s4-gensec: Replace gensec_get_my_addr with new tsocket based fn.Andreas Schneider3-23/+24
2009-12-16s4-gensec: Replace gensec_set_my_addr() with new tsocket based fn.Andreas Schneider2-10/+0
2009-12-16s4-gensec: Added remote and local setter/getter using tsocket.Andreas Schneider3-4/+127
2009-10-24s4:gensec/schannel: remove unused talloc_reference() in schannel_update()Stefan Metzmacher1-1/+1
We never expose creds to the caller in schannel_update(). metze
2009-10-23s4-python: we need to include Python.h firstAndrew Tridgell1-1/+1
If we don't include Python.h first then we get a pile of warnings due to broken redefines of XOPEN_SOURCE in the Python includes.
2009-10-23s4:gensec Use an index on computerName in schannel.ldbAndrew Bartlett1-1/+4
2009-10-23s4-ldbwrap: added re-use of ldb contexts in ldb_wrap_connect()Andrew Tridgell1-1/+1
This allows us to reuse a ldb context if it is open twice, instead of going through the expensive process of a full ldb open. We can reuse it if all of the parameters are the same. The change relies on callers using talloc_unlink() or free of a parent to close a ldb context.
2009-10-23s4-dsdb: create a static system_session contextAndrew Tridgell1-2/+2
This patch adds a system_session cache, preventing us from having to recreate it on every ldb open, and allowing us to detect when the same session is being used in ldb_wrap
2009-10-20s4: ran minimal_includes.pl on source4/auth/gensecAndrew Tridgell6-12/+0
2009-10-14s4: Changes the old occurences of "lp_realm" in "lp_dnsdomain" where neededMatthias Dieter Wallnöfer1-9/+5
For KERBEROS applications the realm should be upcase (function "lp_realm") but for DNS ones it should be used lowcase (function "lp_dnsdomain"). This patch implements the use of both in the right way.
2009-10-02s4-pygensec: a bit closer to workingAndrew Tridgell3-9/+56
I'll need help from Andrew on how to get gensec to initialise it's ops element
2009-09-26gensec: Avoid exposing lp_ctx on the API level.Jelmer Vernooij3-14/+12
2009-09-26pygensec: Add initial work on a gensec Python module.Jelmer Vernooij3-0/+184
2009-09-25s4:auth/gensec/schannel - fix a const warningMatthias Dieter Wallnöfer1-1/+2
2009-09-25s4:schannel: fix some compiler warningsStefan Metzmacher1-2/+4
If we only do signing we can pass down a const data buffer. metze
2009-09-17spnego: Support ASN.1 BIT STRING and use it in SPNEGO.Kouhei Sutou1-2/+4
Signed-off-by: Günther Deschner <gd@samba.org>
2009-09-17spnego: share spnego_parse.Günther Deschner4-475/+2
Guenther
2009-09-16libcli/auth: rewrite schannel sign/seal code to be more genericStefan Metzmacher1-33/+56
This prepares support for HMAC-SHA256/AES. metze
2009-09-16schannel: move schannel_sign to main directory.Günther Deschner4-312/+3
Guenther
2009-09-16s4-schannel: try to fix the build.Günther Deschner1-1/+1
Guenther