summaryrefslogtreecommitdiff
path: root/source4/dsdb
AgeCommit message (Collapse)AuthorFilesLines
2012-08-03s4:dsdb:replicated_objects: do not move 'instanceType' to the end of ↵Stefan Metzmacher1-1/+22
msg->elements on RODC replication It's very important that the order of msg->elements and md->ctr.ctr1.array is the same. metze
2012-07-31s4-dsdb: Replace any existing lastKnownParent attribute during deleteAndrew Bartlett1-1/+1
This allows a lastKnownParent from LostAndFound to be replaced. Andrew Bartlett
2012-07-31s4-dsdb: Improve tracing in repl_meta_dataAndrew Bartlett1-7/+8
When we call ldb_module_done() rather than just calling the callback, we make log entries that are critical in debugging. Andrew Bartlett
2012-07-31s4-dsdb: Handle rename conflicts in both directionsAndrew Bartlett1-49/+87
Previously we would only consider renaming the local object, now we can cope with renaming the remote object as well. This should avoid most of the cases where Samba AD replication can just stop. Andrew Bartlett
2012-07-31s4-dsdb: Request extended DN and show deleted when searching for a possible ↵Andrew Bartlett1-2/+4
parent This fixes up the lastKnownParent attribute on lostAndFound objects to have a GUID (found by dbcheck). Andrew Bartlett
2012-07-29s4-dsdb: Fill in lastKnownParent when moving to lostAndFoundAndrew Bartlett2-0/+46
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org> Autobuild-Date(master): Sun Jul 29 16:51:34 CEST 2012 on sn-devel-104
2012-07-29s4-dsdb: Do not strip base components off DN before searching for NC rootAndrew Bartlett1-7/+10
2012-07-29s4-dsdb: Change move to lostAndFound to use container in this partiion and ↵Andrew Bartlett1-2/+31
add debugging The logic looking for LostAndFound failed for a user, so add extensive debugging to make this eaiser to trace down in future. Andrew Bartlett
2012-07-29s4-dsdb: Provide a way to force incoming renames to take priorityAndrew Bartlett1-2/+4
This should mean that a samba-tool drs replicate --full-sync forces a replication of all objects, regardless of if we think the local name is newer and regards any local name as being in conflict. Andrew Bartlett
2012-07-29s4-dsdb: Provide a way to handle conflicts due to renameAndrew Bartlett1-25/+102
This allows us to proceed with replication when the source DC is sending us an object which has a matching object in this NC (by name) but not by GUID. Andrew Bartlett
2012-07-29s4-repl: Use ldb_dn_new() to create the rootDSE DNAndrew Bartlett1-1/+5
Based on a patch proposal by Matthieu Patou <mat@matws.net>. Andrew Bartlett
2012-07-29s4-repl: Use NULL for pointer test when checking for ldb_msg_new() failureAndrew Bartlett1-1/+1
2012-07-18dsdb: Allocate new OID to allow updates of a read-only replicaAndrew Bartlett4-5/+14
Normally this would be a very bad idea, but the specific case of fixing the instanceType is the only case where this makes sense. Andrew Bartlett
2012-07-18s4-dsdb: Allow dbcheck to correct an incorrect instanceTypeAndrew Bartlett1-3/+5
2012-07-18s4-dsdb: Ensure we never write read-only objects onto a read-write replicaAndrew Bartlett1-1/+8
We should prevent this much further up the stack, but at least add a choke at this point for now. Additionally, this avoids administrator-forced replications causing considerable damange to the directory. Andrew Bartlett
2012-07-06s4-dsdb: Remove unused variables in py_dsdb_get_partitions_dnAndrew Bartlett1-3/+0
2012-07-06pydsdb: Add bindings for dsdb_wellknown_dn()Andrew Bartlett1-0/+35
2012-07-06s4-pydsdb: Add bindings for dsdb_find_nc_root()Andrew Bartlett1-0/+23
2012-07-06s4-pydsdb: Improve PyErr_LDB_{DN,}_OR_RAISE to use py_check_dcerpc_typeAndrew Bartlett1-2/+9
This checks the type rather than just dereferencing the pointer. Andrew Bartlett
2012-07-06s4-dsdb: Give a much better error message when parentGUID generation failsAndrew Bartlett1-3/+3
2012-07-06s4-dsdb: Use parent_object_guid to find the correct parent for new objectsAndrew Bartlett3-1/+129
This allows the parent to be renmaed while a new object is added on another replica. This rename may also be a delete, in which case we must move it to lostandfound. Andrew Bartlett
2012-06-27s4-dsdb when setting DSDB_CONTROL_PASSWORD_BYPASS_LAST_SET_OID make it ↵Andrew Bartlett1-1/+7
non-critical
2012-06-27s4-dsdb: Remove hooks for non-directory password handlingAndrew Bartlett1-12/+0
This was an interesting hack, and the local_password module still exists, but until it has a use case and a test case, remove the bypass of password_hash. Andrew Bartlett
2012-06-26s4-samldb: do not talloc_steal() the elements of the original requestAndrew Bartlett1-4/+10
2012-06-25s4-join: Import DNS zones in AD DC joinAndrew Bartlett1-0/+2
2012-06-24s4-drepl: Ensure that the op->source does not get deallocated too earlyAndrew Bartlett2-9/+25
We need to have the struct dreplsrv_partition_source_dsa around until the end of the async op, so we use talloc_reference after carefully checking the callers and making the modifications required. This prevents a crash when replicating partitions in the vampire_dc test after adding DNS replication at join time. Andrew Bartlett
2012-06-23selftest: schema is not automatically reloaded now so if you modify it you ↵Matthieu Patou1-0/+9
have to reload it Autobuild-User(master): Matthieu Patou <mat@samba.org> Autobuild-Date(master): Sat Jun 23 10:48:13 CEST 2012 on sn-devel-104
2012-06-22s4-dsdb: operational handle modifyTimeStamp on the CN=aggregate DNMatthieu Patou1-1/+37
modifyTimeStamp is a generated attribute, for most object it's generated directly from the whenChanged attribute. But for the CN=aggregate object in the schema we have to handle it in a different way, that's because for this object whenChanged!=modifyTimeStamp (as checked against Windows 2003R2 DCs) instead the modifyTimeStamp reflect the timestamp of the most recently modified and loaded schema object (that is to the one with the highest USN before the schema was reload due to timeout or by the reloadSchemaNow command). Some third party are using this information to know if they have to update their schema cache and also to check that schema updates have been correctly reloaded by the DC, a good example of this behavior is exchange 2010.
2012-06-22s4-schema: improve the documentation of the dsdb_schema structureMatthieu Patou1-4/+6
2012-06-22s4-dsdb: Check for key SCHEMA_SEQ_NUM in metadata.tdb updatesMatthieu Patou2-3/+192
If the value has changed then reload the schema, this means that now the schema is only reloaded on a periodical basis or if we have been asked explicitly to do it and not necesserly if the schema partition has changed.
2012-06-22s4-dsdb: Add/Update SCHEMA_SEQ_NUM key in the metadata.tdb after schemaUpdateNowMatthieu Patou4-2/+43
The idea is to signal to other process accessing the database that the schema was forced to be reloaded and so they should reload as well.
2012-06-22s4-drs: if schema has changed during replication notify other process that ↵Matthieu Patou1-0/+55
they have to reload the schema
2012-06-22s4-dsdb: move schema_load at the top of module stackMatthieu Patou1-1/+1
2012-06-22s4-extended: do not try to fix if there is no schemaMatthieu Patou1-0/+4
2012-06-22s4-schema: keep track of the timestamp of the most recently changed/created ↵Matthieu Patou3-1/+13
object
2012-06-22s4-schema: generalized time use its own syntax nowMatthieu Patou1-1/+0
2012-06-22s4-drsuapi: Fix a const warningMatthieu Patou1-1/+1
2012-06-22s4-drsuapi: rework the crackname implementation of functionnal namesMatthieu Patou1-24/+122
2012-06-22s4-dsdb-linkedattributes: register the VERIFY_NAME control, handle it when ↵Matthieu Patou1-10/+97
we are a GC In theory when presented this control and not a GC we should use the specified name as the DC to contact for cross-domain link verification. But for the moment we don't support this so we just fail when we have this control and are not a GC.
2012-06-22s4-dsdb: support otherWellKnownObjectsMatthieu Patou1-24/+31
2012-06-22s4-dsdb: Try to avoid much of the time a db search for msDS-IntIDMatthieu Patou3-14/+97
We search in the schema if we have already this intid (using dsdb_attribute_by_attributeID_id because in the range 0x80000000 0xBFFFFFFFF, attributeID is a DSDB_ATTID_TYPE_INTID). If so generate another random value. If not check if the highest USN in the database for the schema partition is the one that we know. If so it means that's only this ldb context that is touching the schema in the database. If not it means that's someone else has modified the database while we are doing our changes too (this case should be very bery rare) in order to be sure do the search in the database.
2012-06-22dsdb-schema: do not reload more often than schema_reload_intervalMatthieu Patou4-2/+42
Samba 4 use to try to reload the schema every time dsdb_get_schema was called (which could be 20+ time per ldb request). Now we only reload at most every xx seconds (xx being the value of dsdb:"schema_reload_interval" or 120). The timestamp of the last reloaded schema is kept in the dsdb_schema object. There is also a timestamp in the ldb_context, that is used by the LDAP server to know if it has to reload the schema after handling the request. This is used to allow that the schema will be immediately reload after a schemaUpdateNow request has been issued, the reload can't occur in the handling of the LDAP request itself because we have a transaction autostarted.
2012-06-22s4-dsdb: fix a warning about unused variableMatthieu Patou1-3/+0
2012-06-21samdb: Accept a list of member variables rather than a comma-separated string.Jelmer Vernooij3-17/+17
2012-06-19ldb: use tdb directly, not tdb_compat.Rusty Russell1-6/+6
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-15lib/param: Create a seperate server role for "active directory domain ↵Andrew Bartlett3-3/+3
controller" This will allow us to detect from the smb.conf if this is a Samba4 AD DC which will allow smarter handling of (for example) accidentially starting smbd rather than samba. To cope with upgrades from existing Samba4 installs, 'domain controller' is a synonym of 'active directory domain controller' and new parameters 'classic primary domain controller' and 'classic backup domain controller' are added. Andrew Bartlett
2012-06-07build: Add missing deps and make MESSAGING a private libraryAndrew Bartlett1-1/+1
To remove finddcs_nbt these missing deps need to be added. These subsystems linked to to implicit dependencies provided by finddcs. Due to the new arrangmenet of subsystems, MESSAGING needs to be a private library to avoid being a source of duplicate symbols. Andrew Bartlett
2012-05-30dsdb: Fix error checking conditions in partition_metadata moduleAmitay Isaacs1-7/+7
Thanks to Matthieu Patou <mat@matws.net> for pointing it out. Autobuild-User: Amitay Isaacs <amitay@samba.org> Autobuild-Date: Wed May 30 17:00:01 CEST 2012 on sn-devel-104
2012-05-23Introduce system MIT krb5 build with --with-system-mitkrb5 option.Alexander Bokovoy4-358/+363
System MIT krb5 build also enabled by specifying --without-ad-dc When --with-system-mitkrb5 (or --withou-ad-dc) option is passed to top level configure in WAF build we are trying to detect and use system-wide MIT krb5 libraries. As result, Samba 4 DC functionality will be disabled due to the fact that it is currently impossible to implement embedded KDC server with MIT krb5. Thus, --with-system-mitkrb5/--without-ad-dc build will only produce * Samba 4 client libraries and their Python bindings * Samba 3 server (smbd, nmbd, winbindd from source3/) * Samba 3 client libraries In addition, Samba 4 DC server-specific tests will not be compiled into smbtorture. This in particular affects spoolss_win, spoolss_notify, and remote_pac rpc tests.
2012-05-19s4-dsdb: allow modification of some deleted object if the show-deleted ↵Matthieu Patou1-4/+9
control is presented Autobuild-User: Matthieu Patou <mat@samba.org> Autobuild-Date: Sat May 19 20:28:01 CEST 2012 on sn-devel-104
generated by cgit (git 2.34.1) at 2024-11-18 20:44:12 +0000