| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
It is much easier to do decryption with wireshark when the keytab is
available for every host in the domain. Running 'net export keytab
<keytab name>' will export the current (as pointed to by the supplied
smb.conf) local Samba4 doamin.
(This uses Heimdal's 'hdb' keytab and then the existing hdb-samba4,
and so has a good chance of keeping working in the long term).
Andrew Bartlett
|
|
This overloads the 'name' part of the keytab name to supply a context
pointer, and so avoids 3 global variables!
To do this, we had to stop putting the entry for kpasswd into the
secrets.ldb. (I don't consider this a big loss, and any entry left
there by an upgrade will be harmless).
Andrew Bartlett
|
|
This removes the last use of the prefix hdb_ldb and makes it clear
that we pass in 3 global variables to get state information into
hdb_samba4 when used as a keytab. (And that they belong to
hdb_samba4, not to the KDC)
Andrew Bartlett
|
|
This requires a rework on Heimdal's windc plugin layer, as we want
full control over what tickets Heimdal will issue. (In particular, in
case our requirements become more complex in future).
The original problem was that Heimdal's check would permit the ticket,
but Samba would then deny it, not knowing it was for kadmin/changepw
Also (in hdb-samba4) be a bit more careful on what entries we will
make the 'change_pw' service mark that this depends on.
Andrew Bartlett
|
|
A single AD server can only host a single domain, so don't stuff about
with looking up our crossRef record in the cn=Partitions container.
We instead trust that lp_realm() and lp_workgroup() works correctly.
Andrew Bartlett
|
|
list=""
list="$list event_context:tevent_context"
list="$list fd_event:tevent_fd"
list="$list timed_event:tevent_timer"
for s in $list; do
o=`echo $s | cut -d ':' -f1`
n=`echo $s | cut -d ':' -f2`
r=`git grep "struct $o" |cut -d ':' -f1 |sort -u`
files=`echo "$r" | grep -v source3 | grep -v nsswitch | grep -v packaging4`
for f in $files; do
cat $f | sed -e "s/struct $o/struct $n/g" > $f.tmp
mv $f.tmp $f
done
done
metze
|
|
metze
|
|
We shoule avoid using the private heimdal function
_krb5_principalname2krb5_principal()
metze
(This used to be commit 10db07c69addce6e90851fb55738d5f9e142946b)
|
|
metze
(This used to be commit feca16dd6d03730b4a67adf5d912ba2d5e1a3025)
|
|
(This used to be commit e01c1e87c0fe9709df7eb5b863f7ce85564174cd)
|
|
(This used to be commit a1715b1f48ba44bd94844418cc9299649aaf1a5e)
|
|
(This used to be commit 230355d2e6e27918dff40823eb238904c7a1870e)
|
|
(This used to be commit 1ce32673d960c8b05b6c1b1b99e1976a402417ae)
|
|
There are still a few tidyups of old FSF addresses to come (in both s3
and s4). More commits soon.
(This used to be commit fcf38a38ac691abd0fa51b89dc951a08e89fdafa)
|
|
This patch updates our build system and glue to support a new snapshot
of lorikeet-heimdal.
We now procude a [SUBSYTEM] in the ans1_deps.pl script, and can depend
on that in the heimdal_build/config.mk. This is much easier than
listing every generated .o file individually.
This required some small changes to the build system, due to the way
the parent directory was handled for the output of scripts. I've also
cleaned up et_deps.pl to handle cleaning up it's generated files on
clean.
The PAC glue in Heimdal has changed significantly: we no longer have a
custom hack in the KDC, instead we have the windc plugin interface.
As such, pac-glue.c is much smaller. In the future, when I'm
confident of the new code, we will also be able to 'downsize'
auth/kerberos/kerberos_pac.c.
(I'll include the updated copy of heimdal in the next chekin, to make
it clearer what's changed in Samba4 itself).
Andrew Bartlett
(This used to be commit 75fddbbc0811010a28ca5bb597b573b3f10ef6d6)
|
|
This merges Samba4 with lorikeet-heimdal, which itself has been
tracking Heimdal CVS for the past couple of weeks.
This is such a big change because Heimdal reorganised it's internal
structures, with the mechglue merge, and because many of our 'wishes' have been granted: we now have DCE_STYLE GSSAPI, send_to_kdc hooks and many other features merged into the mainline code. We have adapted to upstream's choice of API in these cases.
In gensec_gssapi and gensec_krb5, we either expect a valid PAC, or NO
PAC. This matches windows behavour. We also have an option to
require the PAC to be present (which allows us to automate the testing
of this code).
This also includes a restructure of how the kerberos dependencies are
handled, due to the fallout of the merge.
Andrew Bartlett
(This used to be commit 4826f1735197c2a471d771495e6d4c1051b4c471)
|
|
(This used to be commit 51b4270513752d2eafbe77f9de598de16ef84a1f)
|
|
case) as the keytab.
This avoids issues in replicated setups, as we will replicate the
kpasswd key correctly (including from windows, which is why I care at
the moment).
Andrew Bartlett
(This used to be commit 849500d1aa658817052423051b1f5d0b7a1db8e0)
|
|
structure that is more generic than just 'IP/port'.
It now passes make test, and has been reviewed and updated by
metze. (Thankyou *very* much).
This passes 'make test' as well as kerberos use (not currently in the
testsuite).
The original purpose of this patch was to have Samba able to pass a
socket address stucture from the BSD layer into the kerberos routines
and back again. It also removes nbt_peer_addr, which was being used
for a similar purpose.
It is a large change, but worthwhile I feel.
Andrew Bartlett
(This used to be commit 88198c4881d8620a37086f80e4da5a5b71c5bbb2)
|
|
(This used to be commit 63917616016133c623fc6ff59454bc313ee7dd8f)
|
|
with clients compiled against the MIT Kerberos implementation. (Which
checks for address in KRB-PRIV packets, hence my comments on socket
functions earlier today).
It also fixes the 'set password' operation to behave correctly (it was
previously a no-op).
This allows Samba3 to join Samba4. Some winbindd operations even work,
which I think is a good step forward. There is naturally a lot of work
to do, but I wanted at least the very basics of Samba3 domain membership
to be available for the tech preview.
Andrew Bartlett
(This used to be commit 4e80a557f9c68b01ac6d5bb05716fe5b3fd400d4)
|
|
To avoid a circular depenency, it is not allowed to use Krb5 as an
authentication mechanism, so this must be removed from the list. An
extension to the credentials system allows this function.
Also remove proto.h use for any of the KDC, and use NTSTATUS returns
in more places.
Andrew Bartlett
(This used to be commit 5f9dddd02c9c821675d2ccd07561a55edcd7f5b4)
|
|
Add the kpasswd server to our KDC, implementing the 'original' and
Microsoft versions of the protocol.
This works with the Heimdal kpasswd client, but not with MIT, I think
due to ordering issues. It may not be worth the pain to have this
code go via GENSEC, as it is very, very tied to krb5.
This gets us one step closer to joins from Apple, Samba3 and other
similar implementations.
Andrew Bartlett
(This used to be commit ab5dbbe10a162286aa6694c7e08de43b48e34cdb)
|
|
metze
(This used to be commit 4c4f19cc23d256c600819e8b0fddc7734b97e131)
|
|
get good text error strings.
Andrew Bartlett
(This used to be commit 0600202067c00dd5d5d8be2d6559f66b46108f07)
|
|
Andrew Bartlett
(This used to be commit 6a9b6373273f135fe012a6603707d77c2a65e9fa)
|
|
We now generate the PAC, and can verifiy both our own PAC and the PAC
from Win2k3.
This commit adds the PAC generation code, spits out the code to get
the information we need from the NETLOGON server back into a auth/
helper function, and adds a number of glue functions.
In the process of building the PAC generation code, some hints in the
Microsoft PAC specification shed light on other parts of the code, and
the updates to samr.idl and netlogon.idl come from those hints.
Also in this commit:
The Heimdal build package has been split up, so as to only link the
KDC with smbd, not the client utils.
To enable the PAC to be veified with gensec_krb5 (which isn't quite
dead yet), the keyblock has been passed back to the calling layer.
Andrew Bartlett
(This used to be commit e2015671c2f7501f832ff402873ffe6e53b89466)
|
|
- if you want kerberos now, you need to unpack a lorikeet heimdal
tree in source/heimdal/. If source/heimdal/ does not exist at
configure time then all kerberos features are disabled. You cannot
use an external kerberos library for now. That may change later.
- moved lib/replace/ config stuff to lib/replace/ and create a
lib/replace/replace.h. That allows the heimdal build to use our
portability layer, and prevenets duplicate definitions of functions
like strlcat()
- if you do enable heimdal, then you will need to do 'make
HEIMDAL_EXTERNAL' before you build Samba. That should be fixed once
I explain the problem to jelmer (the problem is the inability to
set a depend without also dragging in the object list of the
dependency. We need this for building the heimdal asn1 compiler and
et compiler.
- disabled all of the m4 checks for external kerberos libraries. I
left them in place in auth/kerberos/, but disabled it in
configure.in
some of the heimdal_build/ code is still very rough, for example I
don't correctly detect the correct awk, flex, bison replacements for
heimdal_build/build_external.sh. I expect to fix that stuff up over
the next few days.
(This used to be commit d4648249b2c7fc8b5e7c0fc8d8f92ae043b5691f)
|
|
fill in the function pointers to handle the logging, and catch all the
kerberos warnings. (Currently at level 3).
To avoid a memory leak, this requries a new function: krb5_freelog(),
which I've added to lorikeet/heimdal.
This also required a revamp to how we handle the krb5_context, so as
to make it easier to handle with talloc destructors.
Andrew Bartlett
(This used to be commit 63272794c41231b335b73e7ccf349282f295c4d2)
|
|
be hard to do tcp as well.
(This used to be commit 7cbb95d3f55dbaf9ca606655377682841e4c534d)
|
|
Using current lorikeet/heimdal, and with the KDC module enabled (it is
disabled by default), I almost get the KDC to link.
(To enable the KDC for testing, comment out the only line in
smbd/config.m4, and add 'kdc' to the 'server services' line in
smb.conf).
(This used to be commit 26cd4b4f68a370390e08263067402c6c70e49ec8)
|
|
included Heimdal) to Samba4.
Andrew Bartlett
(This used to be commit 51ba3ea60c265b837821b6c3e031dfe229c10d6a)
|
