Age | Commit message (Collapse) | Author | Files | Lines |
|
some more work on timeouts
(This used to be commit a7e2fe3cb33be2effff7eb764047567f2da3cd55)
|
|
not yet enforced except for the initial connection timeout
(This used to be commit fa1ae9a44b0321b8e458bcb7fd1dcc9475b9bad3)
|
|
will not use it anyway as we plan to support
partitions in ldb directly like with rootdse
Merge ldap_simple_ldb into ldap_backend, it is
not simple anymore and makes no sense to have
it separated now that ldap partitions are gone
Initial attempt at working to some limit to avoid DOSs
for the ldap server.
Simo.
(This used to be commit 97bff3e049eba48019f2b0f3eb5a19e32fef2e23)
|
|
structure that is more generic than just 'IP/port'.
It now passes make test, and has been reviewed and updated by
metze. (Thankyou *very* much).
This passes 'make test' as well as kerberos use (not currently in the
testsuite).
The original purpose of this patch was to have Samba able to pass a
socket address stucture from the BSD layer into the kerberos routines
and back again. It also removes nbt_peer_addr, which was being used
for a similar purpose.
It is a large change, but worthwhile I feel.
Andrew Bartlett
(This used to be commit 88198c4881d8620a37086f80e4da5a5b71c5bbb2)
|
|
(This used to be commit c722f665c90103f3ed57621c460e32ad33e7a8a3)
|
|
Get this out of the server credentials, and push it down to ldb via an
opaque pointer.
Andrew Bartlett
(This used to be commit 61700252e05e0be6b4ffa72ffc24a95c665597e3)
|
|
metze
(This used to be commit a7baf165c10c00096265b790d5362905c527806a)
|
|
The partitioning logic is still there, but we only have one
partition. If we need partitioning in the future it might be better to
remove this partitioning code and use a partitioning module instead
(This used to be commit f4685e7dc9bdc3b9e240c9f5891b9da9251f82e5)
|
|
enabling of packet serialisation
(This used to be commit 6a47cd65a8b588f9ddd375c57caaba08281e7cbb)
|
|
(This used to be commit 6ef4ba0c81002c9960dc5fe4fbfd0622957d492a)
|
|
(This used to be commit c913f466cd27030f8c696ab60b1a4a2eb2ac260c)
|
|
PDC. I suspect we should behave slightly differently on the two ports,
but this is a lot closer than not listening at all. When creating a
user with mmc the global catalog port is used to check for an existing
user
(This used to be commit f8430c3f41313d0a71cea23e1a2ef98f088aff44)
|
|
authenticated session down into LDB. This associates a session info
structure with the open LDB, allowing a future ldb_ntacl module to
allow/deny operations on that basis.
Along the way, I cleaned up a few things, and added new helper functions
to assist. In particular the LSA pipe uses simpler queries for some of
the setup.
In ldap_server, I have removed the 'ldasrv:hacked' module, which hasn't
been worked on (other than making it continue to compile) since January,
and I think the features of this module are being put into ldb anyway.
I have also changed the partitions in ldap_server to be initialised
after the connection, with the private pointer used to associate the ldb
with the incoming session.
Andrew Bartlett
(This used to be commit fd7203789a2c0929eecea8125b57b833a67fed71)
|
|
code, where a stream_terminate_connection() while processing a request
can cause a later defererence of the connection structure to die.
(This used to be commit efbcb0f74176058a74d7134dae4658b891fc6f16)
|
|
(This used to be commit b871ecbc2cf5ef2222e498f7819a06aa9082e155)
|
|
metze
(This used to be commit d02e1aa049f29590fbb5e08a32ee54177baa71a7)
|
|
Melcher. ldap_encode() now takes a memory context to use for the data
blob
(This used to be commit 09948a59336a7f02bf2b4605f2d4d886e65b85f2)
|
|
- use this for the send_queue's of the different stream_servers
to not redefine the same struct so often, and it maybe will be used
in other places too
metze
(This used to be commit b6694f067ab7aff0ee303dbfe8a6e7fad801e7e9)
|
|
be able to send a message to the "ldap_server" task without having to
know its task ID.
(This used to be commit 8f69867867857e0c9a9246c2dec9612ccc234724)
|
|
(This used to be commit 44ded17bc2501cd8d03fb3a94a3b7c502f5a2128)
|
|
to task_server_terminate()
(This used to be commit a7447e25ac203f0ee09ffdf72df1094eb70e7c0c)
|
|
(This used to be commit 1dbb5bf2c1c6e11b3467b6eb1a2206c6299bc25b)
|
|
(This used to be commit 51ea22db2df3a002de3779302cd455bfb2e3fec2)
|
|
connections on that port
(This used to be commit 30da6a1cc41308a16a486111887f45bcf598f064)
|
|
- fixed some infinite loops in asn1.c
- ensure asn1 callers know if an error is end of buffer or bad data
- handle npending 0 in ldap server
(This used to be commit f22c3b84c8912ccd36e676a782b58f1841be8875)
|
|
- got rid of the special cases for sasl buffers
- added a tls_socket_pending() call to determine how much data is waiting on a tls connection
- removed the attempt at async handling of ldap calls. The buffers/sockets are all async, but the calls themselves
are sync.
(This used to be commit 73cb4aad229d08e17e22d5792580bd43a61b142a)
|
|
- this involved changing the buffer handling in the ldap server quite a
lot, as it didn't handle partial packets at all
- removed completely bogus asn1_object_length() function. You can't
do that with BER/DER
(This used to be commit fed6f4cc6ceaf83aacb581499aeaf6af4ee8ddd2)
|
|
element in a structure is not necessary any more.
(This used to be commit 912d0427f52eac811b27bf7e385b0642f7dc7f53)
|
|
(This used to be commit 9b7a89735f18f66ead010d5a1a0a6516ee9b93fe)
|
|
(This used to be commit b902ea546d2d1327b23f40ddaeeaa8e7e3662454)
|
|
refresh, release and query)
- change the iface_n_*() functions to return a "const char *" instead of a "struct ipv4_addr"
I think that in general we should move towards "const char *" for
all IP addresses, as this makes IPv6 much easier, and is also easier
to debug. Andrew, when you get a chance, could you fix some of the
auth code to use strings for IPs ?
- return a NTSTATUS error on bad name queries and node status instead
of using rcode. This makes the calling code simpler.
- added low level name release code in libcli/nbt/
- use a real IP in the register and wins nbt torture tests, as w2k3
WINS server silently rejects some operations that don't come from the
IP being used (eg. it says "yes" to a release, but does not in fact
release the name)
(This used to be commit bb1ab11d8e0ea0bd9ae34aebeb565d36fe4b495f)
|
|
(This used to be commit 7f54c8a339f36aa43c9340be70ab7f0067593ef2)
|
|
gettimeofday() call
and just use timeval_current() when its actually needed
(This used to be commit 236403cc4dc2924ed6a898acae0bb44cc1688dcc)
|
|
make it possible to add optimisations to the events code such as
keeping the next timed event in a sorted list, and using epoll for
file descriptor events.
I also removed the loop events code, as it wasn't being used anywhere,
and changed timed events to always be one-shot (as adding a new timed
event in the event handler is so easy to do if needed)
(This used to be commit d7b4b6de51342a65bf46fce772d313f92f8d73d3)
|
|
servers in smbd. The old code still contained a fairly bit of legacy
from the time when smbd was only handling SMB connection. The new code
gets rid of all of the smb_server specific code in smbd/, and creates
a much simpler infrastructures for new server code.
Major changes include:
- simplified the process model code a lot.
- got rid of the top level server and service structures
completely. The top level context is now the event_context. This
got rid of service.h and server.h completely (they were the most
confusing parts of the old code)
- added service_stream.[ch] for the helper functions that are
specific to stream type services (services that handle streams, and
use a logically separate process per connection)
- got rid of the builtin idle_handler code in the service logic, as
none of the servers were using it, and it can easily be handled by
a server in future by adding its own timed_event to the event
context.
- fixed some major memory leaks in the rpc server code.
- added registration of servers, rather than hard coding our list of
possible servers. This allows for servers as modules in the future.
- temporarily disabled the winbind code until I add the helper
functions for that type of server
- added error checking on service startup. If a configured server
fails to startup then smbd doesn't startup.
- cleaned up the command line handling in smbd, removing unused options
(This used to be commit cf6a46c3cbde7b1eb1b86bd3882b953a2de3a42e)
|
|
large commit. I thought this was worthwhile to get done for
consistency.
(This used to be commit ec32b22ed5ec224f6324f5e069d15e92e38e15c0)
|
|
(which seem just a little too complex) changed, but this code was not
updated or tested.
Also clarify the existing code, by not reusing variables.
Andrew Bartlett
(This used to be commit eb46adade4a0b9f0977479eb767c0bc7936a9585)
|
|
- stream_socket services
the smb, ldap and rpc service which sets up a srtam socket end then
waits for connections
and
- task services
which this you can create a seperate task that do something
(this is also going through the process_model subsystem
so with -M standard a new process for this created
with -M thread a new thread ...
I'll add datagram services later when we whave support for datagram sockets in lib/socket/
see the next commit as an example for service_task's
metze
(This used to be commit d5fa02746c6569b09b6e05785642da2fad3ba3e0)
|
|
w2k3 dc join working
I just commit that to not lose it if my home box would crash...
you need a hacked.ldb with some stuff in it, I'll explain later
and you need --option="ldapsrv:hacked=yes"
so what is left now is KRB5 support for DCERPC in the server
as the EVENT LOG of w2k3 says...
metze
(This used to be commit d72760d26ffe531e34bcbec623b986761152ae5b)
|
|
talloc(ctx, 0) call.
- cleaned up some talloc usage in various files
I'd like to get to the point that we have no calls to talloc(), at
which point we will rename talloc_p() to talloc(), to encourage
everyone to use the typesafe functions.
(This used to be commit e6c81d7c9f8a6938947d3c1c8a971a0d6d50b67a)
|
|
In developing a GSSAPI plugin for GENSEC, it became clear that the API
needed to change:
- GSSAPI exposes only a wrap() and unwrap() interface, and determines
the location of the signature itself.
- The 'have feature' API did not correctly function in the recursive
SPNEGO environment.
As such, NTLMSSP has been updated to support these methods.
The LDAP client and server have been updated to use the new wrap() and
unwrap() methods, and now pass the LDAP-* tests in our smbtorture.
(Unfortunely I still get valgrind warnings, in the code that was
previously unreachable).
Andrew Bartlett
(This used to be commit 9923c3bc1b5a6e93a5996aadb039bd229e888ac6)
|
|
the backend what is actually in use
metze
(This used to be commit 6f3eb7bc03609108b9e0ea5676fca3d04140e737)
|
|
- fix compiler warnings with gcc-4.0
metze
(This used to be commit 7a931ea0f4884d866bbb05b7b81f8e0598364813)
|
|
deferred reply is short-circuited immediately when the file is
closed by another user, allowing it to be opened by the waiting user.
- added a sane set of timeval manipulation routines
- converted all the events code and code that uses it to use struct
timeval instead of time_t, which allows for microsecond resolution
instead of 1 second resolution. This was needed for doing the pvfs
deferred open code, and is why the patch is so big.
(This used to be commit 0d51511d408d91eb5f68a35e980e0875299b1831)
|
|
(This used to be commit c6f486574470a311e0d336c026103f131451e21e)
|
|
(This used to be commit 70d2090f6bf2c7e0caf1e9c020f330de88871f8e)
|
|
ioctl.h)
(This used to be commit b97e395c814762024336c1cf4d7c25be8da5813a)
|
|
- tidied up some of the system includes
- moved a few more structures back from misc.idl to netlogon.idl and samr.idl now that pidl
knows about inter-IDL dependencies
(This used to be commit 7b7477ac42d96faac1b0ff361525d2c63cedfc64)
|
|
I have created the include/system/ directory, which will contain the
wrappers for the system includes for logical subsystems. So far I have
created include/system/kerberos.h and include/system/network.h, which
contain all the system includes for kerberos code and networking code.
These are the included in subsystems that need kerberos or networking
respectively.
Note that this method avoids the mess of #ifdef HAVE_XXX_H in every C
file, instead each C module includes the include/system/XXX.h file for
the logical system support it needs, and the details are kept isolated
in include/system/
This patch also creates a "struct ipv4_addr" which replaces "struct
in_addr" in our code. That avoids every C file needing to import all
the system networking headers.
(This used to be commit 2e25c71853f8996f73755277e448e7d670810349)
|
|
didn't handle EINTR or EAGAIN)
(This used to be commit c35a8f92c2df354e972ced9371d33657ce99988e)
|