| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
the mixture of async and sync code in gensec makes a EOF on a socket
during a session setup cause a crash. The simplest solution is to
stop processing events on the socket until the session setup is
complete.
|
|
This also changes the calling convention slightly - we should always
allocate this with talloc_zero() to allow some elements to be
optional. Some elements may only make sense in Samba3, which I hope
will use this common structure.
Andrew Bartlett
|
|
this converts all callers that use the Samba4 loadparm lp_ calling
convention to use the lpcfg_ prefix.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
|
|
This allows us to control what groups should be added in what use
cases, and in particular to more carefully control the introduction of
the 'authenticated' group.
In particular, in the 'service_named_pipe' protocol, we do not have
control over the addition of the authenticated users group, so we key
of 'is this user the anonymous SID'.
This also takes more care to allocate the right length ptoken->sids
Andrew Bartlett
|
|
Obviously this isn't needed and in general site names shouldn't be hardcoded
anymore (except there is a good reason).
|
|
Signed-off-by: Stefan Metzmacher <metze@samba.org>
|
|
Signed-off-by: Stefan Metzmacher <metze@samba.org>
|
|
|
|
metze
|
|
metze
|
|
The auth context was in the past only for NTLM authentication, but we
need a SAM, an event context and and loadparm context for calculating
the local groups too, so re-use that infrustructure we already have in
place.
However, to avoid problems where we may not have an auth_context (in
torture tests, for example), allow a simpler 'session_info' to be
generated, by passing this via an indirection in gensec and an
generate_session_info() function pointer in the struct auth_context.
In the smb_server (for old-style session setups) we need to change the
async context to a new 'struct sesssetup_context'. This allows us to
use the auth_context in processing the authentication reply .
Andrew Bartlett
|
|
we won't be using the mk -> wscript generator again
|
|
them
|
|
|
|
Re-using two of the create_options bits was bound to eventually
cause problems, and indeed, Windows7 now uses one of those bits
when opening text files.
Fixes bug 7189
|
|
Signed-off-by: Stefan Metzmacher <metze@samba.org>
|
|
metze
|
|
metze
|
|
metze
|
|
It is just easier to fill in the known to be 8 byte challenge than
stuff about with allocated pointers.
Andrew Bartlett
|
|
Thanks to Metze for spotting this.
|
|
This helps with the CIFS NTVFS backend, but doesn't solve all problems
|
|
|
|
In order to implement root_fid in the s4 SMB server we need to declare
it as a handle type, just as for other fnum values in SMB. This
required some extensive (but simple) changes in many bits of code.
|
|
|
|
see bug #6610
The MacOSX SMB client sets the BCC value in SMBwriteX calls to zero
instead of the correct size. Checking against WindowsXP, I've found
that Windows uses the maximum of the computed buffer size and the
given BCC value. I've changed Samba4 to do the same to allow MacOSX to
work.
I've limited this change to non-chained packets to ensure we don't get
the possibility of exploits based on overlapping chained requests
|
|
|
|
This fixes bug 6547, where smbclient in S3 reads more than 64k at a
time with readx.
|
|
|
|
We need to loop over all given dialects and check
if we can find SMB2_DIALECT_REVISION_202.
metze
|
|
This change brings ntvfs_connect into compliance with other ntvfs functions
which take an ntvfs module, an ntvfs request and an smb io union.
It now becomes the responsibility of ntvfs modules to examine
tcon->generic.level themselves and derive the share name and any other
options
directly; e.g.
const char *sharename;
switch (tcon->generic.level) {
case RAW_TCON_TCON:
sharename = tcon->tcon.in.service;
break;
case RAW_TCON_TCONX:
sharename = tcon->tconx.in.path;
break;
case RAW_TCON_SMB2:
default:
return NT_STATUS_INVALID_LEVEL;
}
if (strncmp(sharename, "\\\\", 2) == 0) {
char *p = strchr(sharename+2, '\\');
if (p) {
sharename = p + 1;
}
}
service.c smbsrv_tcon_backend() is called before ntvfs_connect and fills in
some of the tcon->..out values.
For the case of RAW_TCON_TCONX, it filles out tcon->tconx.out.tid and
tcon->tconx.out.options
For the case of RAW_TCON_TCON it fills out tcon->tcon.out.tid and
tcon->tcon.out.max_xmit
Thus the ntvfs_connect function for vfs modules may override these values
if desired, but are not required to.
ntvfs_connect functions are required to fill in the tcon->tconx.out.*_type
fields, for RAW_TCON_TCONX, perhaps something like:
if (tcon->generic.level == RAW_TCON_TCONX) {
tcon->tconx.out.fs_type = ntvfs->ctx->fs_type;
tcon->tconx.out.dev_type = ntvfs->ctx->dev_type;
}
Signed-off-by: Sam Liddicott <sam@liddicott.com>
(I fixed the ntvfs_connect() in the smb_server/smb2/
and the RAW_TCON_SMB2 switch case in the modules)
Signed-off-by: Stefan Metzmacher <metze@samba.org>
|
|
smbsrv_tcon_backend no longer creates the ntvfs_request wrapper,
so smbsrv_reply_tcon* can now do this and then invoke ntvfs_connect
in the typical manner using SMBSRV_SETUP_NTVFS_REQUEST and
SMBSRV_CALL_NTVFS_BACKEND
Previously smbsrv_tcon_backend has been responsible for instantiating
the ntvfs_module_context to service a tree-connect request, and
then create an ntvfs_request wrapper around the smbsrv_request
and pass this to ntvfs_connect for the newly created ntvfs.
These actions could not be invoked asynchronously.
This meant that any client requests made while instantiating the
ntvfs module, including any composite's used during authentication
(or related client connections for the case of proxy modules)
would block other ntvfs modules and requests in the current process as
they executed a nested event loop to await completion.
Signed-off-by: Sam Liddicott <sam@liddicott.com>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
|
|
|
|
consistency with Samba 3.
|
|
When starting GENSEC on the server, the auth subsystem context must be
passed in, which now includes function pointers to the key elements.
This should (when the other dependencies are fixed up) allow GENSEC to
exist as a client or server library without bundling in too much of
our server code.
Andrew Bartlett
|
|
metze
|
|
|
|
should in the future only contain some settings required for gensec.
|
|
|
|
make them wrappers around convert_string{,talloc}_convenience().
|
|
functions.
|
|
|
|
set always
metze
|
|
This was found during testing at the CIFS plugfest.
No other client seems to honour or use this bit, but it is quite
ligitimately required by the spec.
Andrew Bartlett
|
|
Real signing always starts with seqnumber 2, and once signing
is on the session key never change anymore for the complete
smb connection.
metze
|
|
|
|
(this does not change the file server role, and only really changes
what 'server signing = auto' means)
Optional signing really isn't any benifit to network security.
In doing so, allow anonymous clients (if permitted by policy) to log
in without signing, as Samba3 does not sign these connections (which
would use an all-zero key, so pointless).
Andrew Bartlett
(This used to be commit 468bf839c500ed1a26ab9a358ee64a4c0a695797)
|
|
Andrew Bartlett
(This used to be commit a89f9818180e8fb868975c444c4d0e5aaa8d4e79)
|
|
(This used to be commit 4b3af09450cf33c6785a3d8fddddc68047f2e388)
|
|
(This used to be commit 036f73d39a7ef882fd76afcd3c11eef483f6c308)
|
