summaryrefslogtreecommitdiff
path: root/source4/smb_server/smb
AgeCommit message (Collapse)AuthorFilesLines
2010-08-14s4:auth Move struct auth_usersupplied_info to a common locationAndrew Bartlett1-2/+2
This also changes the calling convention slightly - we should always allocate this with talloc_zero() to allow some elements to be optional. Some elements may only make sense in Samba3, which I hope will use this common structure. Andrew Bartlett
2010-07-16s4-loadparm: 2nd half of lp_ to lpcfg_ conversionAndrew Tridgell6-42/+42
this converts all callers that use the Samba4 loadparm lp_ calling convention to use the lpcfg_ prefix. Signed-off-by: Andrew Bartlett <abartlet@samba.org>
2010-05-20s4:auth Change auth_generate_session_info to take flagsAndrew Bartlett1-1/+13
This allows us to control what groups should be added in what use cases, and in particular to more carefully control the introduction of the 'authenticated' group. In particular, in the 'service_named_pipe' protocol, we do not have control over the addition of the authenticated users group, so we key of 'is this user the anonymous SID'. This also takes more care to allocate the right length ptoken->sids Andrew Bartlett
2010-05-18s4:smb_server/smb/trans2.c - remove unused define "DEFAULT_SITE_NAME"Matthias Dieter Wallnöfer1-1/+0
Obviously this isn't needed and in general site names shouldn't be hardcoded anymore (except there is a good reason).
2010-05-18s4:smb_server: Implement GET_DFS_REFERRAL for domain referral requestsMatthieu Patou1-1/+871
Signed-off-by: Stefan Metzmacher <metze@samba.org>
2010-05-18s4:smb_server: fix trailling whitespace in trans2.cMatthieu Patou1-25/+25
Signed-off-by: Stefan Metzmacher <metze@samba.org>
2010-05-18Finish removal of iconv_convenience in public API's.Jelmer Vernooij1-3/+3
2010-04-28s4:smb_server/smb: SMBreadX can return STATUS_BUFFER_OVERFLOWStefan Metzmacher1-1/+5
metze
2010-04-27s4:smb_server: pass tsocket_addresses to the ntvfs layerStefan Metzmacher1-2/+4
metze
2010-04-14s4:auth Change auth_generate_session_info to take an auth contextAndrew Bartlett1-18/+61
The auth context was in the past only for NTLM authentication, but we need a SAM, an event context and and loadparm context for calculating the local groups too, so re-use that infrustructure we already have in place. However, to avoid problems where we may not have an auth_context (in torture tests, for example), allow a simpler 'session_info' to be generated, by passing this via an indirection in gensec and an generate_session_info() function pointer in the struct auth_context. In the smb_server (for old-style session setups) we need to change the async context to a new 'struct sesssetup_context'. This allows us to use the auth_context in processing the authentication reply . Andrew Bartlett
2010-04-06s4-waf: removed the AUTOGENERATED markersAndrew Tridgell1-4/+0
we won't be using the mk -> wscript generator again
2010-04-06s4-waf: mark the wscript files as python so vim/emacs knows how to highlight ↵Andrew Tridgell1-0/+2
them
2010-04-06build: commit all the waf build files in the treeAndrew Tridgell1-0/+10
2010-03-05s4-pvfs: move the private ntcreatex flags to private_flagsAndrew Tridgell2-6/+2
Re-using two of the create_options bits was bound to eventually cause problems, and indeed, Windows7 now uses one of those bits when opening text files. Fixes bug 7189
2010-02-02Change uint_t to unsigned int in source4Matt Kraai4-18/+18
Signed-off-by: Stefan Metzmacher <metze@samba.org>
2009-12-24s4:auth: change auth_check_password_send/recv to tevent_reqStefan Metzmacher1-13/+26
metze
2009-12-24s4:gensec: change gensec_update_send/recv to tevent_reqStefan Metzmacher1-5/+15
metze
2009-12-24s4:smb_server: fix mixing socket_address and tsocket_addressStefan Metzmacher1-6/+9
metze
2009-12-22s4:auth Change 'get_challenge' API to be more like Samba3Andrew Bartlett1-4/+1
It is just easier to fill in the known to be 8 byte challenge than stuff about with allocated pointers. Andrew Bartlett
2009-10-17s4-smbserver: removed bogus initialisation of two union armsAndrew Tridgell2-2/+0
Thanks to Metze for spotting this.
2009-10-15s4-smb: fill in fnum as well for root_fidAndrew Tridgell2-1/+3
This helps with the CIFS NTVFS backend, but doesn't solve all problems
2009-10-15s4-smbserver: fixed root_fid in nttrans createAndrew Tridgell1-1/+1
2009-10-15s4-smb: declare root_fid as a file handleAndrew Tridgell2-2/+2
In order to implement root_fid in the s4 SMB server we need to declare it as a handle type, just as for other fnum values in SMB. This required some extensive (but simple) changes in many bits of code.
2009-09-19s4-smbd: minimise includes in smbd/ and smb_serverAndrew Tridgell6-9/+0
2009-08-05changed BCC handling for SMBwriteX to handle broken MacOSX clientAndrew Tridgell1-13/+8
see bug #6610 The MacOSX SMB client sets the BCC value in SMBwriteX calls to zero instead of the correct size. Checking against WindowsXP, I've found that Windows uses the maximum of the computed buffer size and the given BCC value. I've changed Samba4 to do the same to allow MacOSX to work. I've limited this change to non-chained packets to ensure we don't get the possibility of exploits based on overlapping chained requests
2009-08-05on buffer overflow windows gives SMBSRV:ERRerror hereAndrew Tridgell1-1/+1
2009-08-04fixed support for readx greater than 64kAndrew Tridgell1-1/+2
This fixes bug 6547, where smbclient in S3 reads more than 64k at a time with readx.
2009-07-01use the new talloc_reparent in two placesAndrew Tridgell1-1/+1
2009-05-26s4:smb2srv: We only support SMB 2.002.Stefan Metzmacher1-1/+0
We need to loop over all given dialects and check if we can find SMB2_DIALECT_REVISION_202. metze
2009-05-20Have ntvfs_connect() accept union smb_tcon *tcon instead of char* sharenameSam Liddicott2-23/+4
This change brings ntvfs_connect into compliance with other ntvfs functions which take an ntvfs module, an ntvfs request and an smb io union. It now becomes the responsibility of ntvfs modules to examine tcon->generic.level themselves and derive the share name and any other options directly; e.g. const char *sharename; switch (tcon->generic.level) { case RAW_TCON_TCON: sharename = tcon->tcon.in.service; break; case RAW_TCON_TCONX: sharename = tcon->tconx.in.path; break; case RAW_TCON_SMB2: default: return NT_STATUS_INVALID_LEVEL; } if (strncmp(sharename, "\\\\", 2) == 0) { char *p = strchr(sharename+2, '\\'); if (p) { sharename = p + 1; } } service.c smbsrv_tcon_backend() is called before ntvfs_connect and fills in some of the tcon->..out values. For the case of RAW_TCON_TCONX, it filles out tcon->tconx.out.tid and tcon->tconx.out.options For the case of RAW_TCON_TCON it fills out tcon->tcon.out.tid and tcon->tcon.out.max_xmit Thus the ntvfs_connect function for vfs modules may override these values if desired, but are not required to. ntvfs_connect functions are required to fill in the tcon->tconx.out.*_type fields, for RAW_TCON_TCONX, perhaps something like: if (tcon->generic.level == RAW_TCON_TCONX) { tcon->tconx.out.fs_type = ntvfs->ctx->fs_type; tcon->tconx.out.dev_type = ntvfs->ctx->dev_type; } Signed-off-by: Sam Liddicott <sam@liddicott.com> (I fixed the ntvfs_connect() in the smb_server/smb2/ and the RAW_TCON_SMB2 switch case in the modules) Signed-off-by: Stefan Metzmacher <metze@samba.org>
2009-04-23Add async support for reply_tcon* and ntvfs_connectSam Liddicott2-70/+105
smbsrv_tcon_backend no longer creates the ntvfs_request wrapper, so smbsrv_reply_tcon* can now do this and then invoke ntvfs_connect in the typical manner using SMBSRV_SETUP_NTVFS_REQUEST and SMBSRV_CALL_NTVFS_BACKEND Previously smbsrv_tcon_backend has been responsible for instantiating the ntvfs_module_context to service a tree-connect request, and then create an ntvfs_request wrapper around the smbsrv_request and pass this to ntvfs_connect for the newly created ntvfs. These actions could not be invoked asynchronously. This meant that any client requests made while instantiating the ntvfs module, including any composite's used during authentication (or related client connections for the case of proxy modules) would block other ntvfs modules and requests in the current process as they executed a nested event loop to await completion. Signed-off-by: Sam Liddicott <sam@liddicott.com> Signed-off-by: Stefan Metzmacher <metze@samba.org>
2009-03-01s4: Use same function signature for convert_* as s3.Jelmer Vernooij1-6/+6
2009-03-01Add allow_badcharcnv argument to all conversion function, forJelmer Vernooij1-2/+2
consistency with Samba 3.
2009-02-13Remove auth/ntlm as a dependency of GENSEC by means of function pointers.Andrew Bartlett3-27/+27
When starting GENSEC on the server, the auth subsystem context must be passed in, which now includes function pointers to the key elements. This should (when the other dependencies are fixed up) allow GENSEC to exist as a client or server library without bundling in too much of our server code. Andrew Bartlett
2009-02-02s4:smb_server: s/private/private_dataStefan Metzmacher3-6/+6
metze
2008-11-02Fix the build.Jelmer Vernooij1-1/+1
2008-11-02Add gensec_settings structure. This wraps loadparm_context for now, butJelmer Vernooij2-2/+2
should in the future only contain some settings required for gensec.
2008-10-24Remove unused include param/param.h.Jelmer Vernooij2-2/+0
2008-10-24Remove iconv_convenience argument from convert_string{,talloc}() butJelmer Vernooij1-2/+2
make them wrappers around convert_string{,talloc}_convenience().
2008-10-24Remove iconv_convenience parameter from simple string push/pullJelmer Vernooij2-2/+2
functions.
2008-10-11Fix include paths to new location of libutil.Jelmer Vernooij1-1/+1
2008-09-30s4:smb_server/smb: FLAGS2_SMB_SECURITY_SIGNATURES should only be echoed, not ↵Stefan Metzmacher1-5/+6
set always metze
2008-09-29NetApp found that we never set the smb signing flags2.Andrew Bartlett1-0/+4
This was found during testing at the CIFS plugfest. No other client seems to honour or use this bit, but it is quite ligitimately required by the spec. Andrew Bartlett
2008-09-23s4:smb_server: remove the bogus smbsrv_signing_restart()Stefan Metzmacher2-41/+2
Real signing always starts with seqnumber 2, and once signing is on the session key never change anymore for the complete smb connection. metze
2008-09-22Explain why we use signing for DCs, but not file serversAndrew Bartlett1-0/+9
2008-09-05Move our DC to implement mandetory signing.Andrew Bartlett2-4/+10
(this does not change the file server role, and only really changes what 'server signing = auto' means) Optional signing really isn't any benifit to network security. In doing so, allow anonymous clients (if permitted by policy) to log in without signing, as Samba3 does not sign these connections (which would use an all-zero key, so pointless). Andrew Bartlett (This used to be commit 468bf839c500ed1a26ab9a358ee64a4c0a695797)
2008-09-05With a windows 2008 client, even anonymous requires signing...Andrew Bartlett1-6/+0
Andrew Bartlett (This used to be commit a89f9818180e8fb868975c444c4d0e5aaa8d4e79)
2008-07-24initialise query_maximal_access here tooAndrew Tridgell1-0/+1
(This used to be commit 4b3af09450cf33c6785a3d8fddddc68047f2e388)
2008-07-24make sure we initialise query_maximal_accessAndrew Tridgell1-0/+1
(This used to be commit 036f73d39a7ef882fd76afcd3c11eef483f6c308)
2008-07-07smb_server/smb: handle incoming multi fragmented nttrans requestsStefan Metzmacher1-16/+152
metze (This used to be commit 9a5f7bf68b20e3b490b209b5cfc4408566320f2e)