| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
seem to be able to handle incomplete enum types.
(This used to be commit 540155fad3c8e3d79fb631bb3f14273f82130a73)
|
|
(This used to be commit 03647e1321cf6c9bd6ced3945265f635e9468973)
|
|
Remove unused includes of dynconfig.h
(This used to be commit 59083b7ba60d518ddb59646c4fd69938afd079b3)
|
|
- get rid of redundeny dyn_CONFIGFILE argument to lp_load()
- fixed provisioning to work with completely pristine install,
creating an initial smb.conf is none is present
- added lp.set() and lp.reload() to loadparm ejs object interface
(This used to be commit c2691ef7126ddcee5f95970b78759b40a049d0a7)
|
|
event_context for the socket_connect() call, so that when things that
use dcerpc are running alongside anything else it doesn't block the
whole process during a connect.
Then of course I needed to change any code that created a dcerpc
connection (such as the auth code) to also take an event context, and
anything that called that and so on .... thus the size of the patch.
There were 3 places where I punted:
- abartlet wanted me to add a gensec_set_event_context() call
instead of adding it to the gensec init calls. Andrew, my
apologies for not doing this. I didn't do it as adding a new
parameter allowed me to catch all the callers with the
compiler. Now that its done, we could go back and use
gensec_set_event_context()
- the ejs code calls auth initialisation, which means it should pass
in the event context from the web server. I punted on that. Needs fixing.
- I used a NULL event context in dcom_get_pipe(). This is equivalent
to what we did already, but should be fixed to use a callers event
context. Jelmer, can you think of a clean way to do that?
I also cleaned up a couple of things:
- libnet_context_destroy() makes no sense. I removed it.
- removed some unused vars in various places
(This used to be commit 3a3025485bdb8f600ab528c0b4b4eef0c65e3fc9)
|
|
This always loads all the services, as we now don't have an easy way
to split out smbd.
Andrew Bartlett
(This used to be commit 990e061939c76b559c4f5914c5fc6ca1b13e19dd)
|
|
GENSEC, and to pull SCHANNEL into GENSEC, by making it less 'special'.
GENSEC now no longer has it's own handling of 'set username' etc,
instead it uses cli_credentials calls.
In order to link the credentails code right though Samba, a lot of
interfaces have changed to remove 'username, domain, password'
arguments, and these have been replaced with a single 'struct
cli_credentials'.
In the session setup code, a new parameter 'workgroup' contains the
client/server current workgroup, which seems unrelated to the
authentication exchange (it was being filled in from the auth info).
This allows in particular kerberos to only call back for passwords
when it actually needs to perform the kinit.
The kerberos code has been modified not to use the SPNEGO provided
'principal name' (in the mechListMIC), but to instead use the name the
host was connected to as. This better matches Microsoft behaviour,
is more secure and allows better use of standard kerberos functions.
To achieve this, I made changes to our socket code so that the
hostname (before name resolution) is now recorded on the socket.
In schannel, most of the code from librpc/rpc/dcerpc_schannel.c is now
in libcli/auth/schannel.c, and it looks much more like a standard
GENSEC module. The actual sign/seal code moved to
libcli/auth/schannel_sign.c in a previous commit.
The schannel credentails structure is now merged with the rest of the
credentails, as many of the values (username, workstation, domain)
where already present there. This makes handling this in a generic
manner much easier, as there is no longer a custom entry-point.
The auth_domain module continues to be developed, but is now just as
functional as auth_winbind. The changes here are consequential to the
schannel changes.
The only removed function at this point is the RPC-LOGIN test
(simulating the load of a WinXP login), which needs much more work to
clean it up (it contains copies of too much code from all over the
torture suite, and I havn't been able to penetrate its 'structure').
Andrew Bartlett
(This used to be commit 2301a4b38a21aa60917973451687063d83d18d66)
|
|
metze needs a working tree...
The main volume of this patch was what I started working on today:
- Cleans up memory handling around DCE/RPC pipes, to have a parent talloc context.
- Uses sepereate inner loops for some of the DCE/RPC tests
The other and more important part of this patch fixes issues
surrounding the new credentials framwork:
This makes the struct cli_credentials always a talloc() structure,
rather than on the stack. Parts of the cli_credentials code already
assumed this.
There were other issues, particularly in the DCERPC over SMB handling,
as well as little things that had to be tidied up before test_w2k3.sh
would start to pass.
Andrew Bartlett
(This used to be commit 0453f9d05d2e336fba1f85dbf2718d01fa2bf778)
|
|
Fix a couple of bugs in the new cli_credentials code
(This used to be commit 4ad481cfe5cde514d2ef9646147239f3faaa6173)
|
|
less likely that anyone will use pstring for new code
- got rid of winbind_client.h from includes.h. This one triggered a
huge change, as winbind_client.h was including system/filesys.h and
defining the old uint32 and uint16 types, as well as its own
pstring and fstring.
(This used to be commit 9db6c79e902ec538108d6b7d3324039aabe1704f)
|
|
- added async support to the negprot client code
- removed two unused parameters from smbcli_full_connection() code
- converted smbclient to use smbcli_full_connection() rather than
reinventing everything itself
(This used to be commit 71cbe2873473e039b4511511302cb63f1c50bce8)
|
|
- removed the clitar code. It is unmaintained, and a horribly badly done hack
- removed client.h as it contained mostly unused definitions
- removed the unused clidfs.c code
(This used to be commit 31a7bddbb3815b4d625e993dbce4805dae1c18f8)
|
|
parsing, so that module init can take account of lp_ parms (thats
why gensec:krb5=no wasn't working)
- added a BASE-DISCONNECT torture test that tests server response to
clients disconnecting with open lock and open requests pending
(This used to be commit 5205f598b8c0be6985e61cc842cc5da109ba5b7e)
|
|
Both subsystems and modules can now have init functions, which can be
specified in .mk files (INIT_FUNCTION = ...)
The build system will define :
- SUBSYSTEM_init_static_modules that calls the init functions of all statically compiled modules. Failing to load will generate an error which is not fatal
- BINARY_init_subsystems that calls the init functions (if defined) for the subsystems the binary depends on
This removes the hack with the "static bool Initialised = " and the
"lazy_init" functions
(This used to be commit 7a8244761bfdfdfb48f8264d76951ebdfbf7bd8a)
|
|
(This used to be commit 558de54ec6432a4ae90aa14a585f32c6cd03ced2)
|
|
(This used to be commit c6f486574470a311e0d336c026103f131451e21e)
|
|
(This used to be commit 264ce9181089922547e8f6f67116f2d7277a5105)
|
|
and made them private
(This used to be commit 386ac565c452ede1d74e06acb401ca9db99d3ff3)
|
|
of associated functions.
The motivation for this change was to avoid having to convert to/from
ucs2 strings for so many operations. Doing that was slow, used many
static buffers, and was also incorrect as it didn't cope properly with
unicode codepoints above 65536 (which could not be represented
correctly as smb_ucs2_t chars)
The two core functions that allowed this change are next_codepoint()
and push_codepoint(). These functions allow you to correctly walk a
arbitrary multi-byte string a character at a time without converting
the whole string to ucs2.
While doing this cleanup I also fixed several ucs2 string handling
bugs. See the commit for details.
The following code (which counts the number of occuraces of 'c' in a
string) shows how to use the new interface:
size_t count_chars(const char *s, char c)
{
size_t count = 0;
while (*s) {
size_t size;
codepoint_t c2 = next_codepoint(s, &size);
if (c2 == c) count++;
s += size;
}
return count;
}
(This used to be commit 814881f0e50019196b3aa9fbe4aeadbb98172040)
|
|
the short name
(This used to be commit ad5a5ea08d5be812e0ef662948477add2433bc6f)
|
|
(This used to be commit 630fefb24a2f8d332dfa39f6c4980cd230407142)
|
|
possible to a structure creation routine. This makes for much easier
global cleanup.
(This used to be commit e14ee428ec357fab76a960387a9820a673786e27)
|
|
- use lp_maxprotocol() in the libcli/raw/ negotiate code, so we obey
the smb.conf "max protocol" option
- better handling of -M option in masktest
(This used to be commit 8685a584c92ab73a35b29a8c719f1ec207562837)
|
|
rename CLI_ -> SMBCLI_
metze
(This used to be commit 8441750fd9427dd6fe477f27e603821b4026f038)
|
|
smbtorture to use the new interface.
Part 2 will be to eliminate cli_state from smbtorture as this is now
the only place where it is used.
(This used to be commit db1cc96af62ea42837d60592877fc3f93cef143b)
|
|
(This used to be commit 02d068ba7d81d6db25122144981c63f74ad44025)
|
|
(This used to be commit 4cf3839b727c77a727abb558bd9473119a092913)
|
|
(This used to be commit b0510b5428b3461aeb9bbe3cc95f62fc73e2b97f)
|
