| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Tridge et al, please take a close look at this. It survives my basic rpc-login
test as well as rpc-lsa, but this is critical I think.
Volker
(This used to be commit bf1a55f44c84d9bb8b2f83f5d25727550ca8fcf2)
|
|
fun to see
hundreds of logins from a single process.... :-)
Does not do all that is necessary yet. But as the old one was #ifdef'ed out,
this does not hurt much I think.
Volker
(This used to be commit f7cbef3e593df0c75bfd9be5bea64f65042c4d05)
|
|
names.
(This used to be commit 26b191b3c9529b2dae5d004819dab46657064408)
|
|
Andrew Bartlett
(This used to be commit 1fa87223eb66825ef2dd93966652fa84de6b0b2f)
|
|
event_context for the socket_connect() call, so that when things that
use dcerpc are running alongside anything else it doesn't block the
whole process during a connect.
Then of course I needed to change any code that created a dcerpc
connection (such as the auth code) to also take an event context, and
anything that called that and so on .... thus the size of the patch.
There were 3 places where I punted:
- abartlet wanted me to add a gensec_set_event_context() call
instead of adding it to the gensec init calls. Andrew, my
apologies for not doing this. I didn't do it as adding a new
parameter allowed me to catch all the callers with the
compiler. Now that its done, we could go back and use
gensec_set_event_context()
- the ejs code calls auth initialisation, which means it should pass
in the event context from the web server. I punted on that. Needs fixing.
- I used a NULL event context in dcom_get_pipe(). This is equivalent
to what we did already, but should be fixed to use a callers event
context. Jelmer, can you think of a clean way to do that?
I also cleaned up a couple of things:
- libnet_context_destroy() makes no sense. I removed it.
- removed some unused vars in various places
(This used to be commit 3a3025485bdb8f600ab528c0b4b4eef0c65e3fc9)
|
|
(This used to be commit c4d10a98ff991cc48d065c4373570aedc37dccf3)
|
|
(This used to be commit b896daf11c3efb1b3ca939575da9dab82b395777)
|
|
Fill out the group list for the SamLogon reply, so clients get the
supplementary groups.
Andrew Bartlett
(This used to be commit d9c31e60a72c345e3a23a7eb742906bcfc18721c)
|
|
GENSEC, and to pull SCHANNEL into GENSEC, by making it less 'special'.
GENSEC now no longer has it's own handling of 'set username' etc,
instead it uses cli_credentials calls.
In order to link the credentails code right though Samba, a lot of
interfaces have changed to remove 'username, domain, password'
arguments, and these have been replaced with a single 'struct
cli_credentials'.
In the session setup code, a new parameter 'workgroup' contains the
client/server current workgroup, which seems unrelated to the
authentication exchange (it was being filled in from the auth info).
This allows in particular kerberos to only call back for passwords
when it actually needs to perform the kinit.
The kerberos code has been modified not to use the SPNEGO provided
'principal name' (in the mechListMIC), but to instead use the name the
host was connected to as. This better matches Microsoft behaviour,
is more secure and allows better use of standard kerberos functions.
To achieve this, I made changes to our socket code so that the
hostname (before name resolution) is now recorded on the socket.
In schannel, most of the code from librpc/rpc/dcerpc_schannel.c is now
in libcli/auth/schannel.c, and it looks much more like a standard
GENSEC module. The actual sign/seal code moved to
libcli/auth/schannel_sign.c in a previous commit.
The schannel credentails structure is now merged with the rest of the
credentails, as many of the values (username, workstation, domain)
where already present there. This makes handling this in a generic
manner much easier, as there is no longer a custom entry-point.
The auth_domain module continues to be developed, but is now just as
functional as auth_winbind. The changes here are consequential to the
schannel changes.
The only removed function at this point is the RPC-LOGIN test
(simulating the load of a WinXP login), which needs much more work to
clean it up (it contains copies of too much code from all over the
torture suite, and I havn't been able to penetrate its 'structure').
Andrew Bartlett
(This used to be commit 2301a4b38a21aa60917973451687063d83d18d66)
|
|
I wanted to add a simple 'workstation' argument to the DCERPC
authenticated binding calls, but this patch kind of grew from there.
With SCHANNEL, the 'workstation' name (the netbios name of the client)
matters, as this is what ties the session between the NETLOGON ops and
the SCHANNEL bind. This changes a lot of files, and these will again
be changed when jelmer does the credentials work.
I also correct some schannel IDL to distinguish between workstation
names and account names. The distinction matters for domain trust
accounts.
Issues in handling this (issues with lifetime of talloc pointers)
caused me to change the 'creds_CredentialsState' and 'struct
dcerpc_binding' pointers to always be talloc()ed pointers.
In the schannel DB, we now store both the domain and computername, and
query on both. This should ensure we fault correctly when the domain
is specified incorrectly in the SCHANNEL bind.
In the RPC-SCHANNEL test, I finally fixed a bug that vl pointed out,
where the comment claimed we re-used a connection, but in fact we made
a new connection.
This was achived by breaking apart some of the
dcerpc_secondary_connection() logic.
The addition of workstation handling was also propogated to NTLMSSP
and GENSEC, for completeness.
The RPC-SAMSYNC test has been cleaned up a little, using a loop over
usernames/passwords rather than manually expanded tests. This will be
expanded further (the code in #if 0 in this patch) to use a newly
created user account for testing.
In making this test pass test_rpc.sh, I found a bug in the RPC-ECHO
server, caused by the removal of [ref] and the assoicated pointer from
the IDL. This has been re-added, until the underlying pidl issues are
solved.
(This used to be commit 824289dcc20908ddec957a4a892a103eec2da9b9)
|
|
(This used to be commit 6749b9404d4e9876ecd964e038c608f05d2c0b69)
|
|
large commit. I thought this was worthwhile to get done for
consistency.
(This used to be commit ec32b22ed5ec224f6324f5e069d15e92e38e15c0)
|
|
handle the inverted memory hierarchy that a normal session
establishment gave. The inverted hierarchy came from that fact that
you first establish a socket, then a transport, then a session and
finally a tree. That leads to the socket being at the top of the
memory hierarchy and the tree at the bottom, which makes no sense from
the users point of view, as they want to be able to free the tree and
have everything disappear.
The core problem was that the libcli interface didn't distinguish
between establishing a primary context and a secondary context. If you
establish a 2nd session on a transport then you want the transport to
be referenced by the session, whereas if you establish a primary
session then you want the transport to be a child of the session.
To fix this I have added "parent_ctx" and "primary" arguments to the
libcli intialisation functions. This makes using the library much
easier, and gives us a memory hierarchy that makes much more sense.
I was prompted to do this by a bug in the cifs backend, which was
caused by the socket not being properly torn down on a disconnect due
to the inverted memory hierarchy.
(This used to be commit 5e8fd5f70178992e249805c2e1ddafaf6840739b)
|
|
in smb_composite_connect_send(). This makes doing parallel calls much
easier.
(This used to be commit 442308970c123b9fb25615673049e1c1c234a0b9)
|
|
which will eventually try all resolution methods setup in smb.conf
- only resolution backend at the moment is bcast, which does a
parallel broadcast to all configured network interfaces, and takes
the first reply that comes in (this nicely demonstrates how to do
parallel requests using the async APIs)
- converted all the existing code to use the new resolve_name() api
- removed all the old nmb code (yay!)
(This used to be commit 239c310f255e43dd2d1c2433f666c9faaacbdce3)
|
|
encapsulates all the different session setup methods, including the
multi-pass spnego code.
I have hooked this into all the places that previously used the
RAW_SESSSETUP_GENERIC method, and have removed the old
RAW_SESSSETUP_GENERIC code from clisession.c and clitree.c. A nice
side effect is that these two modules are now very simple again, back
to being "raw" session setup handling, which was what was originally
intended.
I have also used this to replace the session setup code in the
smb_composite_connect() code, and used that to build a very simple
replacement for smbcli_tree_full_connection().
As a result, smbclient, smbtorture and all our other SMB connection
code now goes via these composite async functions. That should give
them a good workout!
(This used to be commit 080d0518bc7d6fd4bc3ef783e7d4d2e3275d0799)
|
|
- added async support to the negprot client code
- removed two unused parameters from smbcli_full_connection() code
- converted smbclient to use smbcli_full_connection() rather than
reinventing everything itself
(This used to be commit 71cbe2873473e039b4511511302cb63f1c50bce8)
|
|
- make use of talloc destructors
metze
(This used to be commit 8308da6ce4a95f8c10e22949ef00e9e64f2dbb85)
|
|
Andrew Bartlett
(This used to be commit 8f47c7b02cc28eda022154796c7341fd63a87cc5)
|
|
dcerpc_alter_context and multiple context_ids in the dcerpc client
library.
This stage does the following:
- split "struct dcerpc_pipe" into two parts, the main part being "struct dcerpc_connection", which
contains all the parts not dependent on the context, and "struct dcerpc_pipe" which has
the context dependent part. This is similar to the layering in libcli_*() for SMB
- disable the current dcerpc_alter code. I've used a #warning until i
get the 2nd phase finished. I don't know how portable #warning is, but
it won't be long before I add full alter context support anyway, so it won't last long
- cleanup the allocation of dcerpc_pipe structures. The previous code
was quite awkward.
(This used to be commit 4004c69937be7e5dae56f9567ca607f982d395d3)
|
|
talloc_size() or talloc_array_p() where appropriate.
also fixed a memory leak in pvfs_copy_file() (failed to free a memory
context)
(This used to be commit 89b74b53546e1570b11b3702f40bee58aed8c503)
|
|
(This used to be commit b0b9332519ab6461967a5fe10698dcf4e9950834)
|
|
in my compile
(This used to be commit 0928b1f5b68c858922c3ea6c27ed03b5091c6221)
|
|
This removes the duplicate named SEC_RIGHTS_MAXIMUM_ALLOWED and
SEC_RIGHTS_FULL_CONTROL, which are just other names for
SEC_FLAG_MAXIMUM_ALLOWED and SEC_RIGHTS_FILE_ALL. The latter names
match the new naming conventions in security.idl
Also added names for the generic->specific mappings for files are
directories
(This used to be commit 17a4e0b3aca227b40957ed1e0c57e498debc6ddf)
|
|
Guenther
(This used to be commit 5dde59be0995b9893ef476b06c259776c1115ae7)
|
|
metze
(This used to be commit ba67e98835095e940c23d095422e0cd72e105aee)
|
|
(This used to be commit fc9748841ec439a097e9713e1b60dbcd647469e2)
|
|
certainly not complete, we need to verify all incoming data, not just
accounts.
This needs to be exercised against some 'intersting' users, but for
now it shows that the IDL is already very accurate, particularly after
the previous commits cleanups of names.
Also commit the changes to keep RPC-LOGIN building.
Andrew Bartlett
(This used to be commit 87ec6834bc75012527454abc0e854b1cf2120088)
|
|
Break out the samsync tests from RPC-NETLOGON into a new RPC-SAMSYNC,
that will cross-verify all the values.
Add support for the way netlogon credentials are shared between the
pipe that sets up schannel and the pipe that is encrypted with it.
Test this support, by calling both NETLOGON and SAMR operations in the
RPC-SCHANNEL test.
Move some of the Netlogon NEG flags into the .idl, now we have an idea
what a few of them really are.
Rename the sam_pwd_hash into a name that has meaning (all other crypto
functions were renamed in Samba4 ages ago).
Break out NTLMv2 functionality for operation on the NT hash - I intend
to do NTLMv2 logins in the samsync test in future, and naturally I
only have the hash.
Andrew Bartlett
(This used to be commit 6e6cc6fb9842113a1b0c7f6904dac709b320a6e5)
|
|
tuning
Samba3/OpenLDAP for. For a concrete situation you have to adapt the domain,
pdcname and usernames/passwords. Sorry, not parametrized yet, but this should
be doable if necessary.
Volker
(This used to be commit 02f52058722fc1aea02d4fe237c97404d8e4f491)
|
