From d4b35b895cdf157e49609b59ec89ab648dafb524 Mon Sep 17 00:00:00 2001 From: John Terpstra Date: Wed, 13 Apr 2005 04:04:36 +0000 Subject: More updates. (This used to be commit 20f8bde1d0a2b2e42efedcdac21778fe34c0ab79) --- docs/Samba-HOWTO-Collection/TOSHARG-Securing.xml | 366 +++++++++++++++++++++++ 1 file changed, 366 insertions(+) create mode 100644 docs/Samba-HOWTO-Collection/TOSHARG-Securing.xml (limited to 'docs/Samba-HOWTO-Collection/TOSHARG-Securing.xml') diff --git a/docs/Samba-HOWTO-Collection/TOSHARG-Securing.xml b/docs/Samba-HOWTO-Collection/TOSHARG-Securing.xml new file mode 100644 index 0000000000..b8d65c08ae --- /dev/null +++ b/docs/Samba-HOWTO-Collection/TOSHARG-Securing.xml @@ -0,0 +1,366 @@ + + + + + + &author.tridge; + &author.jht; + May 26, 2003 + + +Securing Samba + + +Introduction + +This note was attached to the Samba 2.2.8 release notes as it contained an +important security fix. The information contained here applies to Samba +installations in general. + + +
+ +A new apprentice reported for duty to the chief engineer of a boiler house. He said, Here I am, +if you will show me the boiler I'll start working on it. Then engineer replied, You're leaning +on it! + +
+ + +Security concerns are just like that. You need to know a little about the subject to appreciate +how obvious most of it really is. The challenge for most of us is to discover that first morsel +of knowledge with which we may unlock the secrets of the masters. + + + + + +Features and Benefits + + +There are three levels at which security principals must be observed in order to render a site +at least moderately secure. They are the perimeter firewall, the configuration of the host +server that is running Samba and Samba itself. + + + +Samba permits a most flexible approach to network security. As far as possible Samba implements +the latest protocols to permit more secure MS Windows file and print operations. + + + +Samba may be secured from connections that originate from outside the local network. This may be +done using host-based protection (using Samba's implementation of a technology +known as tcpwrappers, or it may be done be using interface-based exclusion +so &smbd; will bind only to specifically permitted interfaces. It is also +possible to set specific share or resource-based exclusions, for example on the +auto-share. The share is used for browsing purposes as well as to establish +TCP/IP connections. + + + +Another method by which Samba may be secured is by setting Access Control Entries (ACEs) in an Access +Control List (ACL) on the shares themselves. This is discussed in File, Directory and Share Access Controls. + + + + + +Technical Discussion of Protective Measures and Issues + + +The key challenge of security is the fact that protective measures suffice at best +only to close the door on known exploits and breach techniques. Never assume that +because you have followed these few measures that the Samba server is now an impenetrable +fortress! Given the history of information systems so far, it is only a matter of time +before someone will find yet another vulnerability. + + + + Using Host-Based Protection + + + In many installations of Samba, the greatest threat comes from outside + your immediate network. By default, Samba will accept connections from + any host, which means that if you run an insecure version of Samba on + a host that is directly connected to the Internet you can be + especially vulnerable. + + + + One of the simplest fixes in this case is to use the and + options in the Samba &smb.conf; configuration file to only + allow access to your server from a specific range of hosts. An example might be: + + + +127.0.0.1 192.168.2.0/24 192.168.3.0/24 +0.0.0.0/0 + + + + The above will only allow SMB connections from localhost (your own + computer) and from the two private networks 192.168.2 and 192.168.3. All other + connections will be refused as soon as the client sends its first packet. The refusal + will be marked as not listening on called name error. + + + + + + User-Based Protection + + + If you want to restrict access to your server to valid users only, then the following + method may be of use. In the &smb.conf; section put: + + + +@smbusers, jacko + + + + This restricts all server access to either the user jacko + or to members of the system group smbusers. + + + + + + + Using Interface Protection + + + By default, Samba will accept connections on any network interface that + it finds on your system. That means if you have a ISDN line or a PPP + connection to the Internet then Samba will accept connections on those + links. This may not be what you want. + + + + You can change this behavior using options like this: + + + +eth* lo +yes + + + + This tells Samba to only listen for connections on interfaces with a + name starting with eth such as eth0, eth1 plus on the loopback + interface called lo. The name you will need to use depends on what + OS you are using. In the above, I used the common name for Ethernet + adapters on Linux. + + + + If you use the above and someone tries to make an SMB connection to + your host over a PPP interface called ppp0, then they will get a TCP + connection refused reply. In that case, no Samba code is run at all as + the operating system has been told not to pass connections from that + interface to any Samba process. + + + + + + Using a Firewall + + + Many people use a firewall to deny access to services they do not + want exposed outside their network. This can be a good idea, + although I recommend using it in conjunction with the above + methods so you are protected even if your firewall is not active + for some reason. + + + + If you are setting up a firewall, you need to know what TCP and + UDP ports to allow and block. Samba uses the following: + + + + UDP/137 - used by nmbd + UDP/138 - used by nmbd + TCP/139 - used by smbd + TCP/445 - used by smbd + + + + The last one is important as many older firewall setups may not be + aware of it, given that this port was only added to the protocol in + recent years. + + + + + + Using IPC$ Share-Based Denials + + + If the above methods are not suitable, then you could also place a + more specific deny on the IPC$ share that is used in the recently + discovered security hole. This allows you to offer access to other + shares while denying access to IPC$ from potentially un-trustworthy + hosts. + + + + To do this you could use: + + + + +192.168.115.0/24 127.0.0.1 +0.0.0.0/0 + + + + This instructs Samba that IPC$ connections are not allowed from + anywhere except from the two listed network addresses (localhost and the 192.168.115 + subnet). Connections to other shares are still allowed. As the + IPC$ share is the only share that is always accessible anonymously, + this provides some level of protection against attackers that do not + know a valid username/password for your host. + + + + If you use this method, then clients will be given an `access denied' + reply when they try to access the IPC$ share. Those clients will not be able to + browse shares, and may also be unable to access some other resources. This is not + recommended unless you cannot use one of the other methods listed above for some reason. + + + + + + NTLMv2 Security + + + To configure NTLMv2 authentication, the following registry keys are worth knowing about: + + + + + [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa] + "lmcompatibilitylevel"=dword:00000003 + + + + + The value 0x00000003 means send NTLMv2 response only. Clients will use NTLMv2 authentication, + use NTLMv2 session security if the server supports it. Domain Controllers accept LM, + NTLM and NTLMv2 authentication. + + + + + [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0] + "NtlmMinClientSec"=dword:00080000 + + + + + The value 0x00080000 means permit only NTLMv2 session security. If either NtlmMinClientSec or + NtlmMinServerSec is set to 0x00080000, the connection will fail if NTLMv2 + session security is not negotiated. + + + + + +Upgrading Samba + + +Please check regularly on http://www.samba.org/ for updates and +important announcements. Occasionally security releases are made and +it is highly recommended to upgrade Samba when a security vulnerability +is discovered. Check with your OS vendor for OS specific upgrades. + + + + + +Common Errors + + +If all of Samba and host platform configuration were really as intuitive as one might like them to be, this +section would not be necessary. Security issues are often vexing for a support person to resolve, not +because of the complexity of the problem, but for the reason that most administrators who post what turns +out to be a security problem request are totally convinced that the problem is with Samba. + + + + Smbclient Works on Localhost, but the Network Is Dead + + + This is a common problem. Red Hat Linux (and others) installs a default firewall. + With the default firewall in place, only traffic on the loopback adapter (IP address 127.0.0.1) + is allowed through the firewall. + + + + The solution is either to remove the firewall (stop it) or modify the firewall script to + allow SMB networking traffic through. See section above in this chapter. + + + + + + Why Can Users Access Home Directories of Other Users? + + + + We are unable to keep individual users from mapping to any other user's + home directory once they have supplied a valid password! They only need + to enter their own password. I have not found any method to configure + Samba so that users may map only their own home directory. + + + + + User xyzzy can map his home directory. Once mapped user xyzzy can also map + anyone else's home directory. + + + + This is not a security flaw, it is by design. Samba allows users to have + exactly the same access to the UNIX file system as when they were logged + onto the UNIX box, except that it only allows such views onto the file + system as are allowed by the defined shares. + + + + If your UNIX home directories are set up so that one user can happily cd + into another users directory and execute ls, the UNIX security solution is to change file + permissions on the user's home directories such that the cd and ls are denied. + + + + Samba tries very hard not to second guess the UNIX administrators security policies, and + trusts the UNIX admin to set the policies and permissions he or she desires. + + + + Samba allows the behavior you require. Simply put the %S + option in the share definition. + + + + The works in conjunction with the list, + so to get the behavior you require, add the line : + +%S + + this is equivalent to adding + +%S + + to the definition of the share, as recommended in + the &smb.conf; man page. + + + + + -- cgit