From 94f33628d8251b614d47b75fd4fd19d1a9965ffa Mon Sep 17 00:00:00 2001 From: Alexander Bokovoy Date: Wed, 30 Apr 2003 22:52:23 +0000 Subject: Rebuild docs (This used to be commit 7cafdf9e9576f7988d72fccbc2fad3fbcd3c67df) --- docs/htmldocs/compiling.html | 1067 ++++++------------------------------------ 1 file changed, 141 insertions(+), 926 deletions(-) (limited to 'docs/htmldocs/compiling.html') diff --git a/docs/htmldocs/compiling.html b/docs/htmldocs/compiling.html index 9c91e70ce1..c62fcf13f2 100644 --- a/docs/htmldocs/compiling.html +++ b/docs/htmldocs/compiling.html @@ -1,971 +1,186 @@ - -How to compile SAMBA
SAMBA Project Documentation
PrevNext

Chapter 27. How to compile SAMBA

Table of Contents
27.1. Access Samba source code via CVS
27.1.1. Introduction
27.1.2. CVS Access to samba.org
27.1.2.1. Access via CVSweb
27.1.2.2. Access via cvs
27.2. Accessing the samba sources via rsync and ftp
27.3. Verifying Samba's PGP signature
27.4. Building the Binaries
27.5. Starting the smbd and nmbd
27.5.1. Starting from inetd.conf
27.5.2. Alternative: starting it as a daemon

You can obtain the samba source from the samba website. To obtain a development version, -you can download samba from CVS or using rsync.

27.1. Access Samba source code via CVS

27.1.1. Introduction

Samba is developed in an open environment. Developers use CVS -(Concurrent Versioning System) to "checkin" (also known as -"commit") new source code. Samba's various CVS branches can + +Chapter 30. How to compile SAMBA

Chapter 30. How to compile SAMBA
Prev Part V. Appendixes Next

Chapter 30. How to compile SAMBA

Samba Team

Jelmer R. Vernooij

The Samba Team

<jelmer@samba.org>

(22 May 2001)

18 March 2003

Table of Contents

Access Samba source code via CVS
Introduction
CVS Access to samba.org
Accessing the samba sources via rsync and ftp
Verifying Samba's PGP signature
Building the Binaries
Compiling samba with Active Directory support
Starting the smbd and nmbd
Starting from inetd.conf
Alternative: starting it as a daemon

+You can obtain the samba source from the samba website. To obtain a development version, +you can download samba from CVS or using rsync. +

Access Samba source code via CVS

Introduction

+Samba is developed in an open environment. Developers use CVS +(Concurrent Versioning System) to "checkin" (also known as +"commit") new source code. Samba's various CVS branches can be accessed via anonymous CVS using the instructions -detailed in this chapter.

This chapter is a modified version of the instructions found at -http://samba.org/samba/cvs.html

27.1.2. CVS Access to samba.org

The machine samba.org runs a publicly accessible CVS +detailed in this chapter. +

+This chapter is a modified version of the instructions found at +http://samba.org/samba/cvs.html +

CVS Access to samba.org

+The machine samba.org runs a publicly accessible CVS repository for access to the source code of several packages, including samba, rsync and jitterbug. There are two main ways of -accessing the CVS server on this host.

27.1.2.1. Access via CVSweb

You can access the source code via your +accessing the CVS server on this host. +

Access via CVSweb

+You can access the source code via your favourite WWW browser. This allows you to access the contents of individual files in the repository and also to look at the revision history and commit logs of individual files. You can also ask for a diff -listing between any two versions on the repository.

Use the URL : http://samba.org/cgi-bin/cvsweb

27.1.2.2. Access via cvs

You can also access the source code via a -normal cvs client. This gives you much more control over you can +listing between any two versions on the repository. +

+Use the URL : http://samba.org/cgi-bin/cvsweb +

Access via cvs

+You can also access the source code via a +normal cvs client. This gives you much more control over what you can do with the repository and allows you to checkout whole source trees and keep them up to date via normal cvs commands. This is the preferred method of access if you are a developer and not -just a casual browser.

To download the latest cvs source code, point your -browser at the URL : http://www.cyclic.com/. +just a casual browser. +

+To download the latest cvs source code, point your +browser at the URL : http://www.cyclic.com/. and click on the 'How to get cvs' link. CVS is free software under the GNU GPL (as is Samba). Note that there are several graphical CVS clients which provide a graphical interface to the sometimes mundane CVS commands. -Links to theses clients are also available from http://www.cyclic.com.

To gain access via anonymous cvs use the following steps. +Links to theses clients are also available from http://www.cyclic.com. +

+To gain access via anonymous cvs use the following steps. For this example it is assumed that you want a copy of the samba source code. For the other source code repositories -on this system just substitute the correct package name

  1. Install a recent copy of cvs. All you really need is a +on this system just substitute the correct package name +

    1. + Install a recent copy of cvs. All you really need is a copy of the cvs client binary. -

    2. Run the command -

      cvs -d :pserver:cvs@samba.org:/cvsroot login -

      When it asks you for a password type cvs. -

    3. Run the command -

      cvs -d :pserver:cvs@samba.org:/cvsroot co samba -

      This will create a directory called samba containing the +

    4. + Run the command +

      + cvs -d :pserver:cvs@samba.org:/cvsroot login +

      + When it asks you for a password type cvs. +

    5. + Run the command +

      + cvs -d :pserver:cvs@samba.org:/cvsroot co samba +

      + This will create a directory called samba containing the latest samba source code (i.e. the HEAD tagged cvs branch). This currently corresponds to the 3.0 development tree. -

      CVS branches other HEAD can be obtained by using the -r +

      + CVS branches other then HEAD can be obtained by using the -r and defining a tag name. A list of branch tag names can be found on the - "Development" page of the samba web site. A common request is to obtain the + "Development" page of the samba web site. A common request is to obtain the latest 2.2 release code. This could be done by using the following userinput. -

      cvs -d :pserver:cvs@samba.org:/cvsroot co -r SAMBA_2_2 samba -

    6. Whenever you want to merge in the latest code changes use +

      + cvs -d :pserver:cvs@samba.org:/cvsroot co -r SAMBA_2_2 samba +

    7. + Whenever you want to merge in the latest code changes use the following command from within the samba directory: -

      cvs update -d -P -

27.2. Accessing the samba sources via rsync and ftp

pserver.samba.org also exports unpacked copies of most parts of the CVS tree at ftp://pserver.samba.org/pub/unpacked and also via anonymous rsync at rsync://pserver.samba.org/ftp/unpacked/. I recommend using rsync rather than ftp. - See the rsync homepage for more info on rsync. -

The disadvantage of the unpacked trees +

+ cvs update -d -P +

Accessing the samba sources via rsync and ftp

+ pserver.samba.org also exports unpacked copies of most parts of the CVS tree at ftp://pserver.samba.org/pub/unpacked and also via anonymous rsync at rsync://pserver.samba.org/ftp/unpacked/. I recommend using rsync rather than ftp. + See the rsync homepage for more info on rsync. +

+ The disadvantage of the unpacked trees is that they do not support automatic merging of local changes like CVS does. rsync access is most convenient for an initial install. -

27.3. Verifying Samba's PGP signature

In these days of insecurity, it's strongly recommended that you verify the PGP signature for any +

Verifying Samba's PGP signature

+In these days of insecurity, it's strongly recommended that you verify the PGP signature for any source file before installing it. According to Jerry Carter of the Samba Team, only about 22% of all Samba downloads have had a corresponding PGP signature download (a very low percentage, which should be considered a bad thing). Even if you're not downloading from a mirror site, verifying PGP -signatures should be a standard reflex.

With that said, go ahead and download the following files:

     $ wget http://us1.samba.org/samba/ftp/samba-2.2.8a.tar.asc
-     $ wget http://us1.samba.org/samba/ftp/samba-pubkey.asc

The first file is the PGP signature for the Samba source file; the other is the Samba public -PGP key itself. Import the public PGP key with:

     $ gpg --import samba-pubkey.asc

And verify the Samba source code integrity with:

     $ gzip -d samba-2.2.8a.tar.gz
-     $ gpg --verify samba-2.2.8a.tar.asc

If you receive a message like, "Good signature from Samba Distribution Verification Key..." +signatures should be a standard reflex. +

+With that said, go ahead and download the following files: +

+     $ wget http://us1.samba.org/samba/ftp/samba-2.2.8a.tar.asc
+     $ wget http://us1.samba.org/samba/ftp/samba-pubkey.asc
+

+The first file is the PGP signature for the Samba source file; the other is the Samba public +PGP key itself. Import the public PGP key with: +

+     $ gpg --import samba-pubkey.asc
+

+And verify the Samba source code integrity with: +

+     $ gzip -d samba-2.2.8a.tar.gz
+     $ gpg --verify samba-2.2.8a.tar.asc
+

+If you receive a message like, "Good signature from Samba Distribution Verification Key..." then all is well. The warnings about trust relationships can be ignored. An example of what -you would not want to see would be:

     gpg: BAD signature from "Samba Distribution Verification Key"

27.4. Building the Binaries

To do this, first run the program ./configure - in the source directory. This should automatically +you would not want to see would be: +

+     gpg: BAD signature from "Samba Distribution Verification Key"
+

Building the Binaries

To do this, first run the program ./configure + in the source directory. This should automatically configure Samba for your operating system. If you have unusual - needs then you may wish to run

root# ./configure --help -

first to see what special options you can enable. - Then executing

root# make

will create the binaries. Once it's successfully - compiled you can use

root# make install

to install the binaries and manual pages. You can - separately install the binaries and/or man pages using

root# make installbin -

and

root# make installman -

Note that if you are upgrading for a previous version + needs then you may wish to run

root# ./configure --help +

first to see what special options you can enable. + Then executing

root# make

will create the binaries. Once it's successfully + compiled you can use

root# make install

to install the binaries and manual pages. You can + separately install the binaries and/or man pages using

root# make installbin +

and

root# make installman +

Note that if you are upgrading for a previous version of Samba you might like to know that the old versions of - the binaries will be renamed with a ".old" extension. You - can go back to the previous version with

root# make revert -

if you find this version a disaster!

27.4.1. Compiling samba with Active Directory support

In order to compile samba with ADS support, you need to have installed - on your system: -

the MIT kerberos development libraries (either install from the sources or use a package). The heimdal libraries will not work.
the OpenLDAP development libraries.

If your kerberos libraries are in a non-standard location then - remember to add the configure option --with-krb5=DIR.

After you run configure make sure that include/config.h it generates contains lines like this:

#define HAVE_KRB5 1
+	the binaries will be renamed with a ".old" extension. You 
+	can go back to the previous version with
root# make revert
+	
if you find this version a disaster!
Compiling samba with Active Directory support
In order to compile samba with ADS support, you need to have installed
+	on your system:
  • the MIT kerberos development libraries
+	    (either install from the sources or use a package). The
+	    heimdal libraries will not work.
  • the OpenLDAP development libraries.
If your kerberos libraries are in a non-standard location then
+	  remember to add the configure option --with-krb5=DIR.
After you run configure make sure that include/config.h it generates contains lines like this:
+#define HAVE_KRB5 1
 #define HAVE_LDAP 1
-		  
If it doesn't then configure did not find your krb5 libraries or
+

If it doesn't then configure did not find your krb5 libraries or your ldap libraries. Look in config.log to figure out why and fix - it.

27.4.1.1. Installing the required packages for Debian

On Debian you need to install the following packages:

libkrb5-dev
krb5-user

-

27.4.1.2. Installing the required packages for RedHat

On RedHat this means you should have at least:

krb5-workstation (for kinit)
krb5-libs (for linking with)
krb5-devel (because you are compiling from source)

-

in addition to the standard development environment.

Note that these are not standard on a RedHat install, and you may need - to get them off CD2.

27.5. Starting the smbd and nmbd

You must choose to start smbd and nmbd either - as daemons or from inetdDon't try - to do both! Either you can put them in inetd.conf and have them started on demand - by inetd, or you can start them as - daemons either from the command line or in /etc/rc.local. See the man pages for details + it.

Installing the required packages for Debian

On Debian you need to install the following packages:

+

  • libkrb5-dev
  • krb5-user

+

Installing the required packages for RedHat

On RedHat this means you should have at least:

+

  • krb5-workstation (for kinit)
  • krb5-libs (for linking with)
  • krb5-devel (because you are compiling from source)

+

in addition to the standard development environment.

Note that these are not standard on a RedHat install, and you may need + to get them off CD2.

Starting the smbd and nmbd

You must choose to start smbd and nmbd either + as daemons or from inetdDon't try + to do both! Either you can put them in + inetd.conf and have them started on demand + by inetd, or you can start them as + daemons either from the command line or in + /etc/rc.local. See the man pages for details on the command line options. Take particular care to read the bit about what user you need to be in order to start - Samba. In many cases you must be root.

The main advantage of starting smbd - and nmbd using the recommended daemon method + Samba. In many cases you must be root.

The main advantage of starting smbd + and nmbd using the recommended daemon method is that they will respond slightly more quickly to an initial connection - request.

27.5.1. Starting from inetd.conf

NOTE; The following will be different if - you use NIS, NIS+ or LDAP to distribute services maps.

Look at your /etc/services. + request.

Starting from inetd.conf

NOTE; The following will be different if + you use NIS, NIS+ or LDAP to distribute services maps.

Look at your /etc/services. What is defined at port 139/tcp. If nothing is defined - then add a line like this:

netbios-ssn 139/tcp

similarly for 137/udp you should have an entry like:

netbios-ns 137/udp

Next edit your /etc/inetd.conf - and add two lines something like this:

		netbios-ssn stream tcp nowait root /usr/local/samba/bin/smbd smbd 
+		then add a line like this:
netbios-ssn     139/tcp
similarly for 137/udp you should have an entry like:
netbios-ns	137/udp
Next edit your /etc/inetd.conf 
+		and add two lines something like this:
+		netbios-ssn stream tcp nowait root /usr/local/samba/bin/smbd smbd 
 		netbios-ns dgram udp wait root /usr/local/samba/bin/nmbd nmbd 
-		
The exact syntax of /etc/inetd.conf 
+

The exact syntax of /etc/inetd.conf varies between unixes. Look at the other entries in inetd.conf - for a guide.

Some unixes already have entries like netbios_ns - (note the underscore) in /etc/services. - You must either edit /etc/services or - /etc/inetd.conf to make them consistent.

On many systems you may need to use the - interfaces option in smb.conf to specify the IP address - and netmask of your interfaces. Run ifconfig + for a guide.

Note

Some unixes already have entries like netbios_ns + (note the underscore) in /etc/services. + You must either edit /etc/services or + /etc/inetd.conf to make them consistent.

Note

On many systems you may need to use the + interfaces option in smb.conf to specify the IP address + and netmask of your interfaces. Run ifconfig as root if you don't know what the broadcast is for your - net. nmbd tries to determine it at run + net. nmbd tries to determine it at run time, but fails on some unixes. -

Many unixes only accept around 5 - parameters on the command line in inetd.conf. +

Warning

Many unixes only accept around 5 + parameters on the command line in inetd.conf. This means you shouldn't use spaces between the options and arguments, or you should use a script, and start the script - from inetd.

Restart inetd, perhaps just send - it a HUP. If you have installed an earlier version of nmbd then you may need to kill nmbd as well.

27.5.2. Alternative: starting it as a daemon

To start the server as a daemon you should create + from inetd.

Restart inetd, perhaps just send + it a HUP. If you have installed an earlier version of + nmbd then you may need to kill nmbd as well.

Alternative: starting it as a daemon

To start the server as a daemon you should create a script something like this one, perhaps calling - it startsmb.

		#!/bin/sh
+		it startsmb.
+		#!/bin/sh
 		/usr/local/samba/bin/smbd -D 
 		/usr/local/samba/bin/nmbd -D 
-		
then make it executable with chmod 
-		+x startsmb
You can then run startsmb by 
-		hand or execute it from /etc/rc.local
-		
To kill it send a kill signal to the processes 
-		nmbd and smbd.
If you use the SVR4 style init system then 
-		you may like to look at the examples/svr4-startup
-		script to make Samba fit into that system.
PrevHomeNext
AppendixesUpMigration from NT4 PDC to Samba-3 PDC
\ No newline at end of file +

then make it executable with chmod + +x startsmb

You can then run startsmb by + hand or execute it from /etc/rc.local +

To kill it send a kill signal to the processes + nmbd and smbd.

Note

If you use the SVR4 style init system then + you may like to look at the examples/svr4-startup + script to make Samba fit into that system.

Prev Up Next
Part V. Appendixes Home Chapter 31. Migration from NT4 PDC to Samba-3 PDC
-- cgit