Chapter 12. Mapping MS Windows and Unix Groups

Chapter 12. Mapping MS Windows and Unix Groups
Prev	Part III. Advanced Configuration	Next

Jean François Micouleau

Gerald (Jerry) Carter

Samba Team

<jerry@samba.org>

John H. Terpstra

Samba Team

<jht@samba.org>

Table of Contents

Features and Benefits

Discussion

Example Configuration

Configuration Scripts

Sample smb.conf add group script
Script to configure Group Mapping

Common Errors

Adding Groups Fails
Adding MS Windows Groups to MS Windows Groups Fails

- Starting with Samba-3, new group mapping functionality is available to create associations - between Windows group SIDs and UNIX groups. The groupmap subcommand - included with the net tool can be used to manage these associations. -

Warning

- The first immediate reason to use the group mapping on a Samba PDC, is that - the domain admin group has been removed and should no longer - be specified in smb.conf. This parameter was used to give the listed users membership - in the Domain Admins Windows group which gave local admin rights on their workstations - (in default configurations). -

Features and Benefits

- Samba allows the administrator to create MS Windows NT4 / 200x group accounts and to - arbitrarily associate them with Unix/Linux group accounts. -

- Group accounts can be managed using the MS Windows NT4 or MS Windows 200x MMC tools - so long as appropriate interface scripts have been provided to smb.conf. -

- Administrators should be aware that where smb.conf group interface scripts make - direct calls to the Unix/Linux system tools (eg: the shadow utilities, groupadd, - groupdel, groupmod) then the resulting Unix/Linux group names will be subject - to any limits imposed by these tools. If the tool does NOT allow upper case characters - or space characters, then the creation of an MS Windows NT4 / 200x style group of - Engineering Managers will attempt to create an identically named - Unix/Linux group, an attempt that will of course fail! -

- There are several possible work-arounds for the operating system tools limitation. One - method is to use a script that generates a name for the Unix/Linux system group that - fits the operating system limits, and that then just passes the Unix/Linux group id (GID) - back to the calling Samba interface. This will provide a dynamic work-around solution. -

- Another work-around is to manually create a Unix/Linux group, then manually create the - MS Windows NT4 / 200x group on the Samba server and then use the net groupmap - tool to connect the two to each other. -

Discussion

- When installing MS Windows NT4 / 200x on a computer, the installation - program creates default users and groups, notably the Administrators group, - and gives that group privileges necessary privileges to perform essential system tasks. - eg: Ability to change the date and time or to kill (or close) any process running on the - local machine. -

- The 'Administrator' user is a member of the 'Administrators' group, and thus inherits - 'Administrators' group privileges. If a 'joe' user is created to be a member of the - 'Administrator' group, 'joe' has exactly the same rights as 'Administrator'. -

- When an MS Windows NT4 / W200x is made a domain member, the "Domain Admins" group of the - PDC is added to the local 'Administrators' group of the workstation. Every member of the - 'Domain Administrators' group inherits the rights of the local 'Administrators' group when - logging on the workstation. -

- The following steps describe how to make Samba PDC users members of the 'Domain Admins' group? -

- create a unix group (usually in /etc/group), let's call it domadm -
add to this group the users that must be Administrators. For example - if you want joe, john and mary, your entry in /etc/group will - look like: -
```
-		domadm:x:502:joe,john,mary
-		
```
-
- Map this domadm group to the "Domain Admins" group by running the command: -
-
```
-		root# net groupmap add ntgroup="Domain Admins" unixgroup=domadm
-		
```
-
- The quotes around "Domain Admins" are necessary due to the space in the group name. - Also make sure to leave no whitespace surrounding the equal character (=). -

- Now joe, john and mary are domain administrators! -

- It is possible to map any arbitrary UNIX group to any Windows NT4 / 200x group as well as - making any UNIX group a Windows domain group. For example, if you wanted to include a - UNIX group (e.g. acct) in a ACL on a local file or printer on a domain member machine, - you would flag that group as a domain group by running the following on the Samba PDC: -

-	root# net groupmap add rid=1000 ntgroup="Accounting" unixgroup=acct
-

- Be aware that the RID parameter is a unsigned 32 bit integer that should - normally start at 1000. However, this rid must not overlap with any RID assigned - to a user. Verifying this is done differently depending on on the passdb backend - you are using. Future versions of the tools may perform the verification automatically, - but for now the burden is on you. -

Example Configuration

- You can list the various groups in the mapping database by executing - net groupmap list. Here is an example: -

-		root#  net groupmap list
-		System Administrators (S-1-5-21-2547222302-1596225915-2414751004-1002) -> sysadmin
-		Domain Admins (S-1-5-21-2547222302-1596225915-2414751004-512) -> domadmin
-		Domain Users (S-1-5-21-2547222302-1596225915-2414751004-513) -> domuser
-		Domain Guests (S-1-5-21-2547222302-1596225915-2414751004-514) -> domguest
-

- For complete details on net groupmap, refer to the net(8) man page. -

Configuration Scripts

- Everyone needs tools. Some of us like to create our own, others prefer to use canned tools - (ie: prepared by someone else for general use). -

Sample `smb.conf` add group script

- A script to great complying group names for use by the Samba group interfaces: -

Example 12.1. smbgrpadd.sh

-
-#!/bin/bash
-
-# Add the group using normal system groupadd tool.
-groupadd smbtmpgrp00
-
-thegid=`cat /etc/group | grep smbtmpgrp00 | cut -d ":" -f3`
-
-# Now change the name to what we want for the MS Windows networking end
-cp /etc/group /etc/group.bak
-cat /etc/group.bak | sed s/smbtmpgrp00/$1/g > /etc/group
-
-# Now return the GID as would normally happen.
-echo $thegid
-exit 0
-

- - The smb.conf entry for the above script would look like: -

-		add group script = /path_to_tool/smbgrpadd.sh %g
-

Script to configure Group Mapping

- In our example we have created a Unix/Linux group called ntadmin. - Our script will create the additional groups Engineers, Marketoids, Gnomes: -

-#!/bin/bash
-
-net groupmap modify ntgroup="Domain Admins" unixgroup=ntadmin
-net groupmap modify ntgroup="Domain Users" unixgroup=users
-net groupmap modify ntgroup="Domain Guests" unixgroup=nobody
-net groupmap modify ntgroup="Administrators" unixgroup=root
-net groupmap modify ntgroup="Users" unixgroup=users
-net groupmap modify ntgroup="Guests" unixgroup=nobody
-net groupmap modify ntgroup="System Operators" unixgroup=sys
-net groupmap modify ntgroup="Account Operators" unixgroup=root
-net groupmap modify ntgroup="Backup Operators" unixgroup=bin
-net groupmap modify ntgroup="Print Operators" unixgroup=lp
-net groupmap modify ntgroup="Replicators" unixgroup=daemon
-net groupmap modify ntgroup="Power Users" unixgroup=sys
-
-#groupadd Engineers
-#groupadd Marketoids
-#groupadd Gnomes
-
-#net groupmap add ntgroup="Engineers"  unixgroup=Engineers    type=d
-#net groupmap add ntgroup="Marketoids" unixgroup=Marketoids   type=d
-#net groupmap add ntgroup="Gnomes"     unixgroup=Gnomes       type=d
-

- Of course it is expected that the administrator will modify this to suit local needs. - For information regarding the use of the net groupmap tool please - refer to the man page. -

Common Errors

-At this time there are many little surprises for the unwary administrator. In a real sense -it is imperative that every step of automated control scripts must be carefully tested -manually before putting them into active service. -

Adding Groups Fails

- This is a common problem when the groupadd is called directly - by the Samba interface script for the add group script in - the smb.conf file. -

- The most common cause of failure is an attempt to add an MS Windows group account - that has either an upper case character and/or a space character in it. -

- There are three possible work-arounds. Firstly, use only group names that comply - with the limitations of the Unix/Linux groupadd system tool. - The second involves use of the script mentioned earlier in this chapter, and the - third option is to manually create a Unix/Linux group account that can substitute - for the MS Windows group name, then use the procedure listed above to map that group - to the MS Windows group. -

Adding MS Windows Groups to MS Windows Groups Fails

- Samba-3 does NOT support nested groups from the MS Windows control environment. -

Prev	Up	Next
Chapter 11. Account Information Databases	Home	Chapter 13. File, Directory and Share Access Controls