From 510064b14e8fddafe615f8c707023fcc3f84f094 Mon Sep 17 00:00:00 2001 From: Gerald Carter Date: Fri, 10 Oct 2003 16:21:39 +0000 Subject: removing docs from HEAD (This used to be commit 820903ef5a062b4b9824c33ee035c68a39c8eeb0) --- docs/htmldocs/install.html | 130 --------------------------------------------- 1 file changed, 130 deletions(-) delete mode 100644 docs/htmldocs/install.html (limited to 'docs/htmldocs/install.html') diff --git a/docs/htmldocs/install.html b/docs/htmldocs/install.html deleted file mode 100644 index 5b9d658984..0000000000 --- a/docs/htmldocs/install.html +++ /dev/null @@ -1,130 +0,0 @@ -Chapter 2. How to Install and Test SAMBA

Chapter 2. How to Install and Test SAMBA

Andrew Tridgell

Samba Team

Jelmer R. Vernooij

The Samba Team

John H. Terpstra

Samba Team

Karl Auer

Dan Shearer

Samba Team

Obtaining and Installing Samba

- Binary packages of Samba are included in almost any Linux or - UNIX distribution. There are also some packages available at - the Samba homepage. Refer to - the manual of your operating system for details on installing packages - for your specific operating system. -

If you need to compile Samba from source, check - .

Configuring Samba (smb.conf)

- Samba's configuration is stored in the smb.conf file, which - usually resides in /etc/samba/smb.conf - or /usr/local/samba/lib/smb.conf. You can either - edit this file yourself or do it using one of the many graphical - tools that are available, such as the Web-based interface SWAT, that - is included with Samba. -

Configuration file syntax

The smb.conf file uses the same syntax as the various old - .ini files in Windows 3.1: Each file consists of various sections, - which are started by putting the section name between brackets ([]) - on a new line. Each contains zero or more key/value-pairs seperated by an - equality sign (=). The file is just a plain-text file, so you can - open and edit it with your favorite editing tool.

Each section in the smb.conf file represents a share - on the Samba server. The section “global” is special, since it - contains settings that apply to the whole Samba server and not - to one share in particular.

contains a very minimal smb.conf. - -

Example 2.1. A minimal smb.conf

[global]
workgroup = WKG
netbios name = MYNAME
[share1]
path = /tmp
[share2]
path = /my_shared_folder
comment = Some random files

Example Configuration

- There are sample configuration files in the examples subdirectory in the - distribution. It is suggested you read them carefully so you can see how the options - go together in practice. See the man page for all the options. - It might be worthwhile to start out with the smb.conf.default - configuration file and adapt it to your needs. It contains plenty of - comments. -

- The simplest useful configuration file would contain something like shown in - . -

- -

Example 2.2. Another simple smb.conf File

[global]
workgroup = MIDEARTH
[homes]
guest ok = no
read only = no

-

- This will allow connections by anyone with an account on the server, using either - their login name or homes as the service name. - (Note: The workgroup that Samba should appear in must also be set. The default - workgroup name is WORKGROUP.) -

- Make sure you put the smb.conf file in the correct place. -

- For more information about security settings for the - [homes] share please refer to - . -

Test Your Config File with testparm

- It's important to validate the contents of the smb.conf file using the testparm program. - If testparm runs correctly, it will list the loaded services. If not, it will give an error message. - Make sure it runs correctly and that the services look reasonable before proceeding. Enter the command: -

-	root#  testparm /etc/samba/smb.conf
-	

Testparm will parse your configuration file and report - any unknown parameters or incorrect syntax.

- Always run testparm again whenever the smb.conf file is changed! -

SWAT

- - SWAT is a Web-based interface that can be used to facilitate the configuration of Samba. - SWAT might not be available in the Samba package that shipped with your platform, - but in a separate package. Please read the SWAT manpage - on compiling, installing and configuring SWAT from source. -

- To launch SWAT, just run your favorite Web browser and point it to - http://localhost:901/. - Replace localhost with the name of the computer on which - Samba is running if that is a different computer than your browser. -

- SWAT can be used from a browser on any IP-connected machine, but be aware that connecting from a remote - machine leaves your connection open to password sniffing as passwords will be sent over the wire in the clear. -

More information about SWAT can be found in .

List Shares Available on the Server

- To list shares that are available from the configured Samba server execute the - following command: -

-$ smbclient -L yourhostname
-

You should see a list of shares available on your server. If you do not, then - something is incorrectly configured. This method can also be used to see what shares - are available on other SMB servers, such as Windows 2000.

If you choose user-level security you may find that Samba requests a password - before it will list the shares. See the smbclient man page for details. - You can force it to list the shares without a password by adding the option - -N to the command line.

Connect with a UNIX Client

- Enter the following command: -

-$ smbclient  //yourhostname/aservice
-

Typically yourhostname is the name of the host on which smbd - has been installed. The aservice is any service that has been defined in the smb.conf - file. Try your user name if you just have a [homes] section in the smb.conf file.

Example: If the UNIX host is called bambi and a valid login name - is fred, you would type:

-$ smbclient //bambi/fred
-

Connect from a Remote SMB Client

Now that Samba is working correctly locally, you can try to - access it from other clients. Within a few minutes, the Samba host - should be listed in the Network Neighborhood on all Windows - clients of its subnet. Try browsing the server from another client - or 'mounting' it.

Mounting disks from a DOS, Windows or OS/2 client can be done by running a command such as:

-C:\> net use d: \\servername\service
-

Try printing, e.g.

-

-C:\> net use lpt1:	\\servername\spoolservice
-

-

C:\> print filename
-

What If Things Don't Work?

You might want to read . - If you are still stuck, refer to . - Samba has been successfully installed at thousands of sites worldwide. - It is unlikely that your particular problem is unique, so it might be - productive to perform an Internet search to see if someone else has encountered - your problem and has found a way to overcome it.

Common Errors

-The following questions and issues are raised repeatedly on the Samba mailing list. -

Large Number of smbd Processes

-Samba consists of three core programs: nmbd, smbd, and winbindd. nmbd is the name server message daemon, -smbd is the server message daemon, and winbindd is the daemon that handles communication with Domain Controllers. -

-If Samba is not running as a WINS server, then there will be one single instance of - nmbd running on your system. If it is running as a WINS server then there will be -two instances one to handle the WINS requests. -

-smbd handles all connection requests. It spawns a new process for each client -connection made. That is why you may see so many of them, one per client connection. -

-winbindd will run as one or two daemons, depending on whether or not it is being -run in split mode (in which case there will be two instances). -

Error Message: open_oplock_ipc

An error message is observed in the log files when smbd is started: “open_oplock_ipc: Failed to get local UDP socket - for address 100007f. Error was Cannot assign requested.

Your loopback device isn't working correctly. Make sure it is configured correctly. The loopback - device is an internal (virtual) network device with the IP address 127.0.0.1. - Read your OS documentation for details on how to configure the loopback on your system.

The network name cannot be found

- This error can be caused by one of these misconfigurations: -

  • You specified an nonexisting path - for the share in smb.conf.

  • The user you are trying to access the share with does not - have sufficient permissions to access the path for - the share. Both read (r) and access (x) should be possible.

  • The share you are trying to access does not exist.

-- cgit