From 293421f3c64a2adff7dc15f7ad3adb6120c9fd16 Mon Sep 17 00:00:00 2001 From: Gerald Carter Date: Wed, 24 Sep 2003 15:05:22 +0000 Subject: syncing up docs, examples, & packaging from 3.0 (This used to be commit dd1348c566b4700ea01bd89639e2d3330c878167) --- docs/htmldocs/AccessControls.html | 641 +- docs/htmldocs/AdvancedNetworkManagement.html | 205 +- docs/htmldocs/Appendixes.html | 4 +- docs/htmldocs/Backup.html | 6 +- docs/htmldocs/CUPS-printing.html | 4106 +++--- docs/htmldocs/ClientConfig.html | 4 +- docs/htmldocs/DNSDHCP.html | 4 +- docs/htmldocs/FastStart.html | 4 +- docs/htmldocs/Further-Resources.html | 166 +- docs/htmldocs/InterdomainTrusts.html | 217 +- docs/htmldocs/IntroSMB.html | 58 +- docs/htmldocs/NT4Migration.html | 235 +- docs/htmldocs/NetworkBrowsing.html | 1167 +- docs/htmldocs/Other-Clients.html | 212 +- docs/htmldocs/PolicyMgmt.html | 333 +- docs/htmldocs/Portability.html | 88 +- docs/htmldocs/ProfileMgmt.html | 1005 +- docs/htmldocs/SWAT.html | 384 +- docs/htmldocs/Samba-Developers-Guide.html | 252 +- docs/htmldocs/Samba-HOWTO-Collection.html | 19052 +++++++++++++------------ docs/htmldocs/SambaHA.html | 4 +- docs/htmldocs/ServerType.html | 336 +- docs/htmldocs/StandAloneServer.html | 121 +- docs/htmldocs/VFS.html | 148 +- docs/htmldocs/bugreport.html | 118 +- docs/htmldocs/compiling.html | 234 +- docs/htmldocs/diagnosis.html | 354 +- docs/htmldocs/domain-member.html | 635 +- docs/htmldocs/findsmb.1.html | 2 +- docs/htmldocs/groupmapping.html | 278 +- docs/htmldocs/install.html | 189 +- docs/htmldocs/integrate-ms-networks.html | 310 +- docs/htmldocs/introduction.html | 5 +- docs/htmldocs/ix01.html | 41 +- docs/htmldocs/lmhosts.5.html | 4 +- docs/htmldocs/locking.html | 506 +- docs/htmldocs/migration.html | 2 +- docs/htmldocs/msdfs.html | 83 +- docs/htmldocs/net.8.html | 6 +- docs/htmldocs/nmbd.8.html | 22 +- docs/htmldocs/nmblookup.1.html | 18 +- docs/htmldocs/ntlm_auth.1.html | 8 +- docs/htmldocs/optional.html | 39 +- docs/htmldocs/pam.html | 481 +- docs/htmldocs/passdb.html | 732 +- docs/htmldocs/pdbedit.8.html | 8 +- docs/htmldocs/pr01.html | 6 +- docs/htmldocs/pr02.html | 2 +- docs/htmldocs/printing.html | 3040 ++-- docs/htmldocs/problems.html | 227 +- docs/htmldocs/rpcclient.1.html | 12 +- docs/htmldocs/samba-bdc.html | 428 +- docs/htmldocs/samba-pdc.html | 596 +- docs/htmldocs/samba.7.html | 26 +- docs/htmldocs/securing-samba.html | 210 +- docs/htmldocs/smb.conf.5.html | 819 +- docs/htmldocs/smbcacls.1.html | 12 +- docs/htmldocs/smbclient.1.html | 62 +- docs/htmldocs/smbcontrol.1.html | 20 +- docs/htmldocs/smbcquotas.1.html | 12 +- docs/htmldocs/smbd.8.html | 26 +- docs/htmldocs/smbmnt.8.html | 4 +- docs/htmldocs/smbmount.8.html | 6 +- docs/htmldocs/smbpasswd.5.html | 4 +- docs/htmldocs/smbpasswd.8.html | 6 +- docs/htmldocs/smbsh.1.html | 12 +- docs/htmldocs/smbspool.8.html | 4 +- docs/htmldocs/smbstatus.1.html | 14 +- docs/htmldocs/smbtar.1.html | 8 +- docs/htmldocs/smbtree.1.html | 8 +- docs/htmldocs/smbumount.8.html | 4 +- docs/htmldocs/speed.html | 153 +- docs/htmldocs/swat.8.html | 12 +- docs/htmldocs/testparm.1.html | 8 +- docs/htmldocs/testprns.1.html | 4 +- docs/htmldocs/troubleshooting.html | 2 +- docs/htmldocs/type.html | 4 +- docs/htmldocs/unicode.html | 78 +- docs/htmldocs/upgrading-to-3.0.html | 240 +- docs/htmldocs/vfstest.1.html | 8 +- docs/htmldocs/wbinfo.1.html | 4 +- docs/htmldocs/winbind.html | 714 +- docs/htmldocs/winbindd.8.html | 26 +- 83 files changed, 19907 insertions(+), 19741 deletions(-) (limited to 'docs/htmldocs') diff --git a/docs/htmldocs/AccessControls.html b/docs/htmldocs/AccessControls.html index 7330836f36..9a15b01948 100644 --- a/docs/htmldocs/AccessControls.html +++ b/docs/htmldocs/AccessControls.html @@ -1,40 +1,44 @@ -Chapter 13. File, Directory and Share Access Controls

Chapter 13. File, Directory and Share Access Controls

John H. Terpstra

Samba Team

Jeremy Allison

Samba Team

Jelmer R. Vernooij

drawing
The Samba Team

May 10, 2003

+Chapter 13. File, Directory and Share Access Controls

Chapter 13. File, Directory and Share Access Controls

John H. Terpstra

Samba Team

Jeremy Allison

Samba Team

Jelmer R. Vernooij

drawing
The Samba Team

May 10, 2003

+ Advanced MS Windows users are frequently perplexed when file, directory and share manipulation of resources shared via Samba do not behave in the manner they might expect. MS Windows network administrators are often confused regarding network access controls and how to -provide users with the access they need while protecting resources from unauthorised access. +provide users with the access they need while protecting resources from unauthorized access.

Many UNIX administrators are unfamiliar with the MS Windows environment and in particular have difficulty in visualizing what the MS Windows user wishes to achieve in attempts to set file and directory access permissions.

The problem lies in the differences in how file and directory permissions and controls work -between the two environments. This difference is one that Samba can not completely hide, even +between the two environments. This difference is one that Samba cannot completely hide, even though it does try to bridge the chasm to a degree. -

+

+ + + POSIX Access Control List technology has been available (along with Extended Attributes) for UNIX for many years, yet there is little evidence today of any significant use. This explains to some extent the slow adoption of ACLs into commercial Linux products. MS Windows -administrators are astounded at this given that ACLs were a foundational capability of the now -decade old MS Windows NT operating system. +administrators are astounded at this, given that ACLs were a foundational capability of the now +decade-old MS Windows NT operating system.

The purpose of this chapter is to present each of the points of control that are possible with Samba-3 in the hope that this will help the network administrator to find the optimum method for delivering the best environment for MS Windows desktop users.

This is an opportune point to mention that Samba was created to provide a means of interoperability -and interchange of data between differing operating environments. Samba has no intent change +and interchange of data between differing operating environments. Samba has no intent to change UNIX/Linux into a platform like MS Windows. Instead the purpose was and is to provide a sufficient -level of exchange of data between the two environments. What is available today extends well +level of exchange of data between the two environments. What is available today extends well beyond early plans and expectations, yet the gap continues to shrink. -

Features and Benefits

+

Features and Benefits

Samba offers a lot of flexibility in file system access management. These are the key access control facilities present in Samba today:

Samba Access Control Facilities

  • + UNIX File and Directory Permissions

    - Samba honours and implements UNIX file system access controls. Users + Samba honors and implements UNIX file system access controls. Users who access a Samba server will do so as a particular MS Windows user. This information is passed to the Samba server as part of the logon or connection setup process. Samba uses this user identity to validate @@ -44,116 +48,132 @@ beyond early plans and expectations, yet the gap continues to shrink.

  • Samba Share Definitions

    - In configuring share settings and controls in the smb.conf file - the network administrator can exercise over-rides to native file - system permissions and behaviours. This can be handy and convenient - to affect behaviour that is more like what MS Windows NT users expect + In configuring share settings and controls in the smb.conf file, + the network administrator can exercise overrides to native file + system permissions and behaviors. This can be handy and convenient + to effect behavior that is more like what MS Windows NT users expect but it is seldom the best way to achieve this. The basic options and techniques are described herein.

  • Samba Share ACLs +

    Just like it is possible in MS Windows NT to set ACLs on shares themselves, so it is possible to do this in Samba. - Very few people make use of this facility, yet it remains on of the + Few people make use of this facility, yet it remains on of the easiest ways to affect access controls (restrictions) and can often do so with minimum invasiveness compared with other methods.

  • + + MS Windows ACLs through UNIX POSIX ACLs

    - The use of POSIX ACLs on UNIX/Linux is possible ONLY if the underlying + The use of POSIX ACLs on UNIX/Linux is possible only if the underlying operating system supports them. If not, then this option will not be available to you. Current UNIX technology platforms have native support - for POSIX ACLs. There are patches for the Linux kernel that provide - this also. Sadly, few Linux platforms ship today with native ACLs and + for POSIX ACLs. There are patches for the Linux kernel that also provide + this. Sadly, few Linux platforms ship today with native ACLs and Extended Attributes enabled. This chapter has pertinent information for users of platforms that support them. -

File System Access Controls

-Perhaps the most important recognition to be made is the simple fact that MS Windows NT4 / 200x / XP +

File System Access Controls

+Perhaps the most important recognition to be made is the simple fact that MS Windows NT4/200x/XP implement a totally divergent file system technology from what is provided in the UNIX operating system -environment. Firstly we should consider what the most significant differences are, then we shall look +environment. First we consider what the most significant differences are, then we look at how Samba helps to bridge the differences. -

MS Windows NTFS Comparison with UNIX File Systems

+

MS Windows NTFS Comparison with UNIX File Systems

+ + + + + Samba operates on top of the UNIX file system. This means it is subject to UNIX file system conventions and permissions. It also means that if the MS Windows networking environment requires file system - behaviour that differs from unix file system behaviour then somehow Samba is responsible for emulating + behavior that differs from UNIX file system behavior then somehow Samba is responsible for emulating that in a transparent and consistent manner.

- It is good news that Samba does this to a very large extent and on top of that provides a high degree - of optional configuration to over-ride the default behaviour. We will look at some of these over-rides, - but for the greater part we will stay within the bounds of default behaviour. Those wishing to explore - to depths of control ability should review the smb.conf man page. -

File System Feature Comparison

Name Space

- MS Windows NT4 / 200x/ XP files names may be up to 254 characters long, UNIX file names - may be 1023 characters long. In MS Windows file extensions indicate particular file types, + It is good news that Samba does this to a large extent and on top of that provides a high degree + of optional configuration to override the default behavior. We look at some of these over-rides, + but for the greater part we will stay within the bounds of default behavior. Those wishing to explore + the depths of control ability should review the smb.conf man page. +

The following compares file system features for UNIX with those of Microsoft Windows NT/200x: + + +

Name Space

+ MS Windows NT4/200x/XP files names may be up to 254 characters long, and UNIX file names + may be 1023 characters long. In MS Windows, file extensions indicate particular file types, in UNIX this is not so rigorously observed as all names are considered arbitrary.

- What MS Windows calls a Folder, UNIX calls a directory. + What MS Windows calls a folder, UNIX calls a directory.

Case Sensitivity

- - MS Windows file names are generally upper case if made up of 8.3 (ie: 8 character file name - and 3 character extension. If longer than 8.3 file names are Case Preserving, and Case - Insensitive. + + + MS Windows file names are generally upper case if made up of 8.3 (8 character file name + and 3 character extension. File names that are longer than 8.3 are case preserving and case + insensitive.

UNIX file and directory names are case sensitive and case preserving. Samba implements the - MS Windows file name behaviour, but it does so as a user application. The UNIX file system + MS Windows file name behavior, but it does so as a user application. The UNIX file system provides no mechanism to perform case insensitive file name lookups. MS Windows does this by default. This means that Samba has to carry the processing overhead to provide features - that are NOT native to the UNIX operating system environment. + that are not native to the UNIX operating system environment.

- Consider the following, all are unique UNIX names but one single MS Windows file name: - + Consider the following. All are unique UNIX names but one single MS Windows file name: +

 				MYFILE.TXT
 				MyFile.txt
 				myfile.txt
-		
-		So clearly, In an MS Windows file name space these three files CAN NOT co-exist! But in UNIX 
-		they can. So what should Samba do if all three are present? Answer, the one that is lexically
-		first will be accessible to MS Windows users, the others are invisible and unaccessible - any
+		

+ So clearly, in an MS Windows file name space these three files cannot co-exist, but in UNIX + they can. +

+ So what should Samba do if all three are present? That which is lexically first will be + accessible to MS Windows users, the others are invisible and unaccessible any other solution would be suicidal.

Directory Separators

- MS Windows and DOS uses the back-slash '\' as a directory delimiter, UNIX uses the forward-slash '/' - as it's directory delimiter. This is transparently handled by Samba. + + MS Windows and DOS uses the backslash \ as a directory delimiter, and UNIX uses + the forward-slash / as its directory delimiter. This is handled transparently by Samba.

Drive Identification

+ MS Windows products support a notion of drive letters, like C: to represent - disk partitions. UNIX has NO concept if separate identifiers for file partitions since each - such file system is mounted to become part of the over-all directory tree. - The UNIX directory tree begins at '/', just like the root of a DOS drive is specified like - C:\. + disk partitions. UNIX has no concept of separate identifiers for file partitions, each + such file system is mounted to become part of the overall directory tree. + The UNIX directory tree begins at / just like the root of a DOS drive is specified as + C:\.

File Naming Conventions

- MS Windows generally never experiences file names that begin with a '.', while in UNIX these - are commonly found in a user's home directory. Files that begin with a '.' are typically - either start up files for various UNIX applications, or they may be files that contain + + MS Windows generally never experiences file names that begin with a dot (.) while in UNIX these + are commonly found in a user's home directory. Files that begin with a dot (.) are typically + either start-up files for various UNIX applications, or they may be files that contain start-up configuration data.

Links and Short-Cuts

- - - - - MS Windows make use of "links and Short-Cuts" that are actually special types of files that will + + + + MS Windows make use of “links and short-cuts” that are actually special types of files that will redirect an attempt to execute the file to the real location of the file. UNIX knows of file and directory links, but they are entirely different from what MS Windows users are used to.

- Symbolic links are files in UNIX that contain the actual location of the data (file OR directory). An + Symbolic links are files in UNIX that contain the actual location of the data (file or directory). An operation (like read or write) will operate directly on the file referenced. Symbolic links are also - referred to as 'soft links'. A hard link is something that MS Windows is NOT familiar with. It allows + referred to as “soft links.” A hard link is something that MS Windows is not familiar with. It allows one physical file to be known simultaneously by more than one file name.

There are many other subtle differences that may cause the MS Windows administrator some temporary discomfort in the process of becoming familiar with UNIX/Linux. These are best left for a text that is dedicated to the - purpose of UNIX/Linux training/education. -

Managing Directories

- There are three basic operations for managing directories, create, delete, rename. -

Table 13.1. Managing directories with unix and windows

ActionMS Windows CommandUNIX Command
createmd foldermkdir folder
deleterd folderrmdir folder
renamerename oldname newnamemv oldname newname

-

File and Directory Access Control

+ purpose of UNIX/Linux training and education. +

Managing Directories

+ There are three basic operations for managing directories: create, delete, rename. +

Table 13.1. Managing Directories with UNIX and Windows

ActionMS Windows CommandUNIX Command
createmd foldermkdir folder
deleterd folderrmdir folder
renamerename oldname newnamemv oldname newname

+

File and Directory Access Control

+ The network administrator is strongly advised to read foundational training manuals and reference materials regarding file and directory permissions maintenance. Much can be achieved with the basic UNIX permissions without having to resort to more complex facilities like POSIX Access Control Lists (ACLs) or Extended Attributes (EAs).

- UNIX/Linux file and directory access permissions involves setting three (3) primary sets of data and one (1) control set. - A UNIX file listing looks as follows:- - + UNIX/Linux file and directory access permissions involves setting three primary sets of data and one control set. + A UNIX file listing looks as follows:

 $ ls -la
 total 632
@@ -174,393 +194,381 @@ drwsrwsrwx    2 maryo   gnomes       48 2003-05-12 22:29 muchado08
 	

The columns above represent (from left to right): permissions, number of hard links to file, owner, group, size (bytes), access date, access time, file name.

- An overview of the permissions field can be found in the image below. -

Figure 13.1. Overview of unix permissions field

Overview of unix permissions field

- Any bit flag may be unset. An unset bit flag is the equivalent of 'Can NOT' and is represented as a '-' character. + An overview of the permissions field can be found in . +

Figure 13.1. Overview of UNIX permissions field.

Overview of UNIX permissions field.

+ Any bit flag may be unset. An unset bit flag is the equivalent of “cannot” and is represented as a “-” character. -

Example 13.1. Example File

+	

Example 13.1. Example File

 		-rwxr-x---   Means: The owner (user) can read, write, execute
 		                    the group can read and execute
-		                    everyone else can NOT do anything with it
+		                    everyone else cannot do anything with it.
 		

Additional possibilities in the [type] field are: c = character device, b = block device, p = pipe device, s = UNIX Domain Socket.

- The letters `rwxXst' set permissions for the user, group and others as: read (r), write (w), execute (or access for directories) (x), + The letters rwxXst set permissions for the user, group and others as: read (r), write (w), execute (or access for directories) (x), execute only if the file is a directory or already has execute permission for some user (X), set user or group ID on execution (s), sticky (t).

When the sticky bit is set on a directory, files in that directory may be unlinked (deleted) or renamed only by root or their owner. Without the sticky bit, anyone able to write to the directory can delete or rename files. The sticky bit is commonly found on - directories, such as /tmp, that are world-writable. + directories, such as /tmp, that are world-writable.

When the set user or group ID bit (s) is set on a directory, then all files created within it will be owned by the user and/or - group whose 'set user or group' bit is set. This can be very helpful in setting up directories that for which it is desired that + group whose `set user or group' bit is set. This can be helpful in setting up directories for which it is desired that all users who are in a group should be able to write to and read from a file, particularly when it is undesirable for that file - to be exclusively owned by a user who's primary group is not the group that all such users belong to. + to be exclusively owned by a user whose primary group is not the group that all such users belong to.

When a directory is set drw-r----- this means that the owner can read and create (write) files in it, but because - the (x) execute flags are not set files can not be listed (seen) in the directory by anyone. The group can read files in the - directory but can NOT create new files. NOTE: If files in the directory are set to be readable and writable for the group, then + the (x) execute flags are not set, files cannot be listed (seen) in the directory by anyone. The group can read files in the + directory but cannot create new files. If files in the directory are set to be readable and writable for the group, then group members will be able to write to (or delete) them. -

Share Definition Access Controls

-The following parameters in the smb.conf file sections that define a share control or affect access controls. -Before using any of the following options please refer to the man page for smb.conf. -

User and Group Based Controls

- User and group based controls can prove very useful. In some situations it is distinctly desirable to affect all - file system operations as if a single user is doing this, the use of the force user and - force group behaviour will achieve this. In other situations it may be necessary to affect a - paranoia level of control to ensure that only particular authorised persons will be able to access a share or - it's contents, here the use of the valid users or the invalid users may - be most useful. +

Share Definition Access Controls

+ +The following parameters in the smb.conf file sections define a share control or effect access controls. +Before using any of the following options, please refer to the man page for smb.conf. +

User and Group-Based Controls

+ User and group-based controls can prove quite useful. In some situations it is distinctly desirable to affect all + file system operations as if a single user were doing so. The use of the force user and + force group behavior will achieve this. In other situations it may be necessary to effect a + paranoia level of control to ensure that only particular authorized persons will be able to access a share or + its contents. Here the use of the valid users or the + invalid users may be most useful.

As always, it is highly advisable to use the least difficult to maintain and the least ambiguous method for - controlling access. Remember, that when you leave the scene someone else will need to provide assistance and - if that person finds too great a mess, or if they do not understand what you have done then there is risk of + controlling access. Remember, when you leave the scene someone else will need to provide assistance and + if he finds too great a mess or does not understand what you have done, there is risk of Samba being removed and an alternative solution being adopted. -

Table 13.2. User and Group Based Controls

Control ParameterDescription - Action - Notes
admin users

+

+ enumerates these controls. +

Table 13.2. User and Group Based Controls

Control ParameterDescription - Action - Notes
admin users

List of users who will be granted administrative privileges on the share. - They will do all file operations as the super-user (root). + They will do all file operations as the super-user (root). Any user in this list will be able to do anything they like on the share, irrespective of file permissions. -

force group

+

force group

Specifies a UNIX group name that will be assigned as the default primary group for all users connecting to this service. -

force user

+

force user

Specifies a UNIX user name that will be assigned as the default user for all users connecting to this service. This is useful for sharing files. Incorrect use can cause security problems. -

guest ok

+

guest ok

If this parameter is set for a service, then no password is required to connect to the service. Privileges will be those of the guest account. -

invalid users

+

invalid users

List of users that should not be allowed to login to this service. -

only user

+

only user

Controls whether connections with usernames not in the user list will be allowed. -

read list

+

read list

List of users that are given read-only access to a service. Users in this list will not be given write access, no matter what the read only option is set to. -

username

- Refer to the smb.conf man page for more information - this is a complex and potentially misused parameter. -

valid users

+

username

+ Refer to the smb.conf man page for more information -- this is a complex and potentially misused parameter. +

valid users

List of users that should be allowed to login to this service. -

write list

+

write list

List of users that are given read-write access to a service. -

File and Directory Permissions Based Controls

- The following file and directory permission based controls, if misused, can result in considerable difficulty to - diagnose the cause of mis-configuration. Use them sparingly and carefully. By gradually introducing each one by one - undesirable side-effects may be detected. In the event of a problem, always comment all of them out and then gradually - re-introduce them in a controlled fashion. -

Table 13.3. File and Directory Permission Based Controls

Control ParameterDescription - Action - Notes
create mask

+

File and Directory Permissions-Based Controls

+ The following file and directory permission-based controls, if misused, can result in considerable difficulty to + diagnose causes of misconfiguration. Use them sparingly and carefully. By gradually introducing each one by one, + undesirable side effects may be detected. In the event of a problem, always comment all of them out and then gradually + reintroduce them in a controlled way. +

+ Refer to for information regarding the parameters that may be used to affect file and + directory permission-based access controls. +

Table 13.3. File and Directory Permission Based Controls

Control ParameterDescription - Action - Notes
create mask

Refer to the smb.conf man page. -

directory mask

+

directory mask

The octal modes used when converting DOS modes to UNIX modes when creating UNIX directories. See also: directory security mask. -

dos filemode

+

dos filemode

Enabling this parameter allows a user who has write access to the file to modify the permissions on it. -

force create mode

+

force create mode

This parameter specifies a set of UNIX mode bit permissions that will always be set on a file created by Samba. -

force directory mode

+

force directory mode

This parameter specifies a set of UNIX mode bit permissions that will always be set on a directory created by Samba. -

force directory security mode

- Controls UNIX permission bits modified when a Windows NT client is manipulating UNIX permissions on a directory -

force security mode

+

force directory security mode

+ Controls UNIX permission bits modified when a Windows NT client is manipulating UNIX permissions on a directory. +

force security mode

Controls UNIX permission bits modified when a Windows NT client manipulates UNIX permissions. -

hide unreadable

+

hide unreadable

Prevents clients from seeing the existence of files that cannot be read. -

hide unwriteable files

+

hide unwriteable files

Prevents clients from seeing the existence of files that cannot be written to. Unwriteable directories are shown as usual. -

nt acl support

+

nt acl support

This parameter controls whether smbd will attempt to map UNIX permissions into Windows NT access control lists. -

security mask

+

security mask

Controls UNIX permission bits modified when a Windows NT client is manipulating the UNIX permissions on a file. -

Miscellaneous Controls

+

Miscellaneous Controls

The following are documented because of the prevalence of administrators creating inadvertent barriers to file - access by not understanding the full implications of smb.conf file settings. -

Table 13.4. Other Controls

Control ParameterDescription - Action - Notes
case sensitive, default case, short preserve case

+ access by not understanding the full implications of smb.conf file settings. See . +

Table 13.4. Other Controls

Control ParameterDescription - Action - Notes
case sensitive, default case, short preserve case

This means that all file name lookup will be done in a case sensitive manner. - Files will be created with the precise filename Samba received from the MS Windows client. -

csc policy

+ Files will be created with the precise file name Samba received from the MS Windows client. +

csc policy

Client Side Caching Policy - parallels MS Windows client side file caching capabilities. -

dont descend

- Allows to specify a comma-delimited list of directories that the server should always show as empty. -

dos filetime resolution

+

dont descend

+ Allows specifying a comma-delimited list of directories that the server should always show as empty. +

dos filetime resolution

This option is mainly used as a compatibility option for Visual C++ when used against Samba shares. -

dos filetimes

- DOS and Windows allows users to change file time stamps if they can write to the file. POSIX semantics prevent this. - This options allows DOS and Windows behaviour. -

fake oplocks

+

dos filetimes

+ DOS and Windows allow users to change file time stamps if they can write to the file. POSIX semantics prevent this. + This option allows DOS and Windows behavior. +

fake oplocks

Oplocks are the way that SMB clients get permission from a server to locally cache file operations. If a server grants an - oplock then the client is free to assume that it is the only one accessing the file and it will aggressively cache file data. -

hide dot files, hide files, veto files

+ oplock, the client is free to assume that it is the only one accessing the file and it will aggressively cache file data. +

hide dot files, hide files, veto files

Note: MS Windows Explorer allows over-ride of files marked as hidden so they will still be visible. -

read only

+

read only

If this parameter is yes, then users of a service may not create or modify files in the service's directory. -

veto files

+

veto files

List of files and directories that are neither visible nor accessible. -

Access Controls on Shares

+

Access Controls on Shares

+ This section deals with how to configure Samba per share access control restrictions. By default, Samba sets no restrictions on the share itself. Restrictions on the share itself - can be set on MS Windows NT4/200x/XP shares. This can be a very effective way to limit who can + can be set on MS Windows NT4/200x/XP shares. This can be an effective way to limit who can connect to a share. In the absence of specific restrictions the default setting is to allow - the global user Everyone Full Control (ie: Full control, Change and Read). + the global user Everyone - Full Control (full control, change and read).

- At this time Samba does NOT provide a tool for configuring access control setting on the Share + At this time Samba does not provide a tool for configuring access control setting on the share itself. Samba does have the capacity to store and act on access control settings, but the only way to create those settings is to use either the NT4 Server Manager or the Windows 200x MMC for Computer Management.

Samba stores the per share access control settings in a file called share_info.tdb. - The location of this file on your system will depend on how samba was compiled. The default location + The location of this file on your system will depend on how Samba was compiled. The default location for Samba's tdb files is under /usr/local/samba/var. If the tdbdump utility has been compiled and installed on your system, then you can examine the contents of this file - by: tdbdump share_info.tdb. -

Share Permissions Management

+ by executing: tdbdump share_info.tdb in the directory containing the tdb files. +

Share Permissions Management

The best tool for the task is platform dependant. Choose the best tool for your environment. -

Windows NT4 Workstation/Server

+

Windows NT4 Workstation/Server

The tool you need to use to manage share permissions on a Samba server is the NT Server Manager. Server Manager is shipped with Windows NT4 Server products but not with Windows NT4 Workstation. - You can obtain the NT Server Manager for MS Windows NT4 Workstation from Microsoft - see details below. + You can obtain the NT Server Manager for MS Windows NT4 Workstation from Microsoft see details below.

Procedure 13.1. Instructions

  1. - Launch the NT4 Server Manager, click on the Samba server you want to administer, then from the menu - select Computer, then click on the Shared Directories entry. + Launch the NT4 Server Manager, click on the Samba server you want to administer. From the menu + select Computer, then click on Shared Directories.

  2. - Now click on the share that you wish to manage, then click on the Properties tab, next click on + Click on the share that you wish to manage, then click the Properties tab. then click the Permissions tab. Now you can add or change access control settings as you wish. -

Windows 200x/XP

+

Windows 200x/XP

On MS Windows NT4/200x/XP system access control lists on the share itself are set using native - tools, usually from file manager. For example, in Windows 200x: right click on the shared folder, + tools, usually from File Manager. For example, in Windows 200x, right click on the shared folder, then select Sharing, then click on Permissions. The default - Windows NT4/200x permission allows Everyone Full Control on the Share. + Windows NT4/200x permission allows “Everyone” full control on the share.

- MS Windows 200x and later all comes with a tool called the Computer Management snap-in for the - Microsoft Management Console (MMC). This tool is located by clicking on Control Panel -> - Administrative Tools -> Computer Management. + MS Windows 200x and later versions come with a tool called the Computer Management snap-in for the + Microsoft Management Console (MMC). This tool is located by clicking on Control Panel -> + Administrative Tools -> Computer Management.

Procedure 13.2. Instructions

  1. - After launching the MMC with the Computer Management snap-in, click on the menu item Action, - select Connect to another computer. If you are not logged onto a domain you will be prompted - to enter a domain login user identifier and a password. This will authenticate you to the domain. - If you where already logged in with administrative privilege this step is not offered. + After launching the MMC with the Computer Management snap-in, click the menu item Action, + and select Connect to another computer. If you are not logged onto a domain you will be prompted + to enter a domain login user identifier and a password. This will authenticate you to the domain. + If you are already logged in with administrative privilege, this step is not offered.

  2. - If the Samba server is not shown in the Select Computer box, then type in the name of the target - Samba server in the field Name:. Now click on the [+] next to + If the Samba server is not shown in the Select Computer box, type in the name of the target + Samba server in the field Name:. Now click the on [+] next to System Tools, then on the [+] next to Shared Folders in the left panel.

  3. - Now in the right panel, double-click on the share you wish to set access control permissions on. - Then click on the tab Share Permissions. It is now possible to add access control entities - to the shared folder. Do NOT forget to set what type of access (full control, change, read) you + In the right panel, double-click on the share on which you wish to set access control permissions. + Then click the tab Share Permissions. It is now possible to add access control entities + to the shared folder. Remember to set what type of access (full control, change, read) you wish to assign for each entry.

Warning

- Be careful. If you take away all permissions from the Everyone user without removing this user - then effectively no user will be able to access the share. This is a result of what is known as - ACL precedence. ie: Everyone with no access means that MaryK who is part of the group - Everyone will have no access even if this user is given explicit full control access. -

MS Windows Access Control Lists and UNIX Interoperability

Managing UNIX permissions Using NT Security Dialogs

+ Be careful. If you take away all permissions from the Everyone user without removing this user, + effectively no user will be able to access the share. This is a result of what is known as + ACL precedence. Everyone with no access means that MaryK who is part of the group + Everyone will have no access even if she is given explicit full control access. +

MS Windows Access Control Lists and UNIX Interoperability

Managing UNIX Permissions Using NT Security Dialogs

+ Windows NT clients can use their native security settings dialog box to view and modify the underlying UNIX permissions.

- Note that this ability is careful not to compromise the security of the UNIX host Samba is running on, and + This ability is careful not to compromise the security of the UNIX host on which Samba is running, and still obeys all the file permission rules that a Samba administrator can set.

- Samba does not attempt to go beyond POSIX ACLs, so that the various finer-grained access control - options provided in Windows are actually ignore. + Samba does not attempt to go beyond POSIX ACLs, so the various finer-grained access control + options provided in Windows are actually ignored.

Note

All access to UNIX/Linux system files via Samba is controlled by the operating system file access controls. - When trying to figure out file access problems it is vitally important to find the identity of the Windows + When trying to figure out file access problems, it is vitally important to find the identity of the Windows user as it is presented by Samba at the point of file access. This can best be determined from the Samba log files. -

Viewing File Security on a Samba Share

- From an NT4/2000/XP client, single-click with the right mouse button on any file or directory in a Samba - mounted drive letter or UNC path. When the menu pops-up, click on the Properties - entry at the bottom of the menu. This brings up the file properties dialog box. Click on the tab - Security and you will see three buttons, Permissions, +

Viewing File Security on a Samba Share

+ From an NT4/2000/XP client, right click on any file or directory in a Samba-mounted drive letter + or UNC path. When the menu pops up, click on the Properties entry at the bottom + of the menu. This brings up the file Properties dialog box. Click on the + Security tab and you will see three buttons: Permissions, Auditing, and Ownership. The Auditing - button will cause either an error message A requested privilege is not held by the client + button will cause either an error message `A requested privilege is not held by the client' to appear if the user is not the NT Administrator, or a dialog which is intended to allow an Administrator to add auditing requirements to a file if the user is logged on as the NT Administrator. This dialog is non-functional with a Samba share at this time, as the only useful button, the Add - button will not currently allow a list of users to be seen. -

Viewing file ownership

+ button, will not currently allow a list of users to be seen. +

Viewing File Ownership

Clicking on the Ownership button brings up a dialog box telling you who owns - the given file. The owner name will be of the form: + the given file. The owner name will be displayed like this:

- "SERVER\user (Long name)" + SERVER\user (Long name)

- Where SERVER is the NetBIOS name of the Samba server, user + SERVER is the NetBIOS name of the Samba server, user is the user name of the UNIX user who owns the file, and (Long name) is the descriptive string identifying the user (normally found in the GECOS field of the UNIX password database). Click on the Close button to remove this dialog.

- If the parameter nt acl support is set to false - then the file owner will be shown as the NT user "Everyone". + If the parameter nt acl support is set to false, + the file owner will be shown as the NT user Everyone.

The Take Ownership button will not allow you to change the ownership of this file to - yourself (clicking on it will display a dialog box complaining that the user you are currently logged onto + yourself (clicking it will display a dialog box complaining that the user you are currently logged onto the NT client cannot be found). The reason for this is that changing the ownership of a file is a privileged operation in UNIX, available only to the root user. As clicking on this button causes - NT to attempt to change the ownership of a file to the current user logged into the NT client this will + NT to attempt to change the ownership of a file to the current user logged into the NT clienti, this will not work with Samba at this time.

- There is an NT chown command that will work with Samba and allow a user with Administrator privilege connected + There is an NT chown command that will work with Samba and allow a user with Administrator privilege connected to a Samba server as root to change the ownership of files on both a local NTFS filesystem or remote mounted NTFS or Samba drive. This is available as part of the Seclib NT security library written - by Jeremy Allison of the Samba-Team, available from the main Samba FTP site.

Viewing File or Directory Permissions

+ by Jeremy Allison of the Samba Team, and is available from the main Samba FTP site.

Viewing File or Directory Permissions

The third button is the Permissions button. Clicking on this brings up a dialog box - that shows both the permissions and the UNIX owner of the file or directory. The owner is displayed in the form: -

"SERVER\ + that shows both the permissions and the UNIX owner of the file or directory. The owner is displayed like this: +

SERVER\ user - (Long name)"

Where SERVER is the NetBIOS name of the Samba server, + (Long name)

Where SERVER is the NetBIOS name of the Samba server, user is the user name of the UNIX user who owns the file, and (Long name) is the descriptive string identifying the user (normally found in the GECOS field of the UNIX password database).

- If the parameter nt acl support is set to false - then the file owner will be shown as the NT user "Everyone" and the permissions will be - shown as NT "Full Control". + If the parameter nt acl support is set to false, + the file owner will be shown as the NT user Everyone and the permissions will be + shown as NT “Full Control”.

The permissions field is displayed differently for files and directories, so I'll describe the way file permissions are displayed first. -

File Permissions

The standard UNIX user/group/world triplet and - the corresponding "read", "write", "execute" permissions - triplets are mapped by Samba into a three element NT ACL - with the 'r', 'w', and 'x' bits mapped into the corresponding - NT permissions. The UNIX world permissions are mapped into - the global NT group Everyone, followed - by the list of permissions allowed for UNIX world. The UNIX - owner and group permissions are displayed as an NT - user icon and an NT local - group icon respectively followed by the list - of permissions allowed for the UNIX user and group.

As many UNIX permission sets don't map into common - NT names such as read, - "change" or full control then - usually the permissions will be prefixed by the words - "Special Access" in the NT display list.

But what happens if the file has no permissions allowed - for a particular UNIX user group or world component? In order - to allow "no permissions" to be seen and modified then Samba - overloads the NT "Take Ownership" ACL attribute - (which has no meaning in UNIX) and reports a component with - no permissions as having the NT "O" bit set. - This was chosen of course to make it look like a zero, meaning - zero permissions. More details on the decision behind this will - be given below.

Directory Permissions

Directories on an NT NTFS file system have two - different sets of permissions. The first set of permissions - is the ACL set on the directory itself, this is usually displayed - in the first set of parentheses in the normal "RW" - NT style. This first set of permissions is created by Samba in - exactly the same way as normal file permissions are, described - above, and is displayed in the same way.

The second set of directory permissions has no real meaning - in the UNIX permissions world and represents the - inherited permissions that any file created within - this directory would inherit.

Samba synthesises these inherited permissions for NT by - returning as an NT ACL the UNIX permission mode that a new file - created by Samba on this share would receive.

Modifying file or directory permissions

Modifying file and directory permissions is as simple +

File Permissions

The standard UNIX user/group/world triplet and the corresponding read, write, execute permissions + triplets are mapped by Samba into a three element NT ACL with the “r”, “w” and “x” bits mapped into the corresponding + NT permissions. The UNIX world permissions are mapped into the global NT group Everyone, followed + by the list of permissions allowed for UNIX world. The UNIX owner and group permissions are displayed as an NT + user icon and an NT local group icon, respectively, followed by the list + of permissions allowed for the UNIX user and group.

Because many UNIX permission sets do not map into common NT names such as read, + change or full control, usually the permissions will be prefixed + by the words Special Access in the NT display list.

But what happens if the file has no permissions allowed for a particular UNIX user group or world component? In order + to allow “no permissions” to be seen and modified Samba then overloads the NT Take Ownership ACL attribute + (which has no meaning in UNIX) and reports a component with no permissions as having the NT O bit set. + This was chosen, of course, to make it look like a zero, meaning zero permissions. More details on the decision behind this is + given below.

Directory Permissions

Directories on an NT NTFS file system have two different sets of permissions. The first set is the ACL set on the + directory itself, which is usually displayed in the first set of parentheses in the normal RW + NT style. This first set of permissions is created by Samba in exactly the same way as normal file permissions are, described + above, and is displayed in the same way.

The second set of directory permissions has no real meaning in the UNIX permissions world and represents the + inherited permissions that any file created within this directory would inherit.

Samba synthesises these inherited permissions for NT by returning as an NT ACL the UNIX permission mode that a new file + created by Samba on this share would receive.

Modifying File or Directory Permissions

Modifying file and directory permissions is as simple as changing the displayed permissions in the dialog box, and - clicking the OK button. However, there are + clicking on OK. However, there are limitations that a user needs to be aware of, and also interactions with the standard Samba permission masks and mapping of DOS - attributes that need to also be taken into account.

If the parameter nt acl support - is set to false then any attempt to set - security permissions will fail with an "Access Denied" - message.

The first thing to note is that the "Add" + attributes that need to also be taken into account.

If the parameter nt acl support + is set to false, any attempt to set + security permissions will fail with an `Access Denied' + message.

The first thing to note is that the Add button will not return a list of users in Samba (it will give - an error message of The remote procedure call failed - and did not execute). This means that you can only + an error message saying `The remote procedure call failed + and did not execute'). This means that you can only manipulate the current user/group/world permissions listed in the dialog box. This actually works quite well as these are the only permissions that UNIX actually has.

If a permission triplet (either user, group, or world) is removed from the list of permissions in the NT dialog box, then when the OK button is pressed it will - be applied as "no permissions" on the UNIX side. If you then - view the permissions again the "no permissions" entry will appear - as the NT "O" flag, as described above. This + be applied as “no permissions” on the UNIX side. If you then + view the permissions again, the “no permissions” entry will appear + as the NT O flag, as described above. This allows you to add permissions back to a file or directory once - you have removed them from a triplet component.

As UNIX supports only the "r", "w" and "x" bits of - an NT ACL then if other NT security attributes such as "Delete - access" are selected then they will be ignored when applied on - the Samba server.

When setting permissions on a directory the second + you have removed them from a triplet component.

As UNIX supports only the “r”, “w” and “x” bits of + an NT ACL, if other NT security attributes such as Delete Access are + selected they will be ignored when applied on the Samba server.

When setting permissions on a directory, the second set of permissions (in the second set of parentheses) is by default applied to all files within that directory. If this - is not what you want you must uncheck the Replace + is not what you want, you must uncheck the Replace permissions on existing files checkbox in the NT - dialog before clicking OK.

If you wish to remove all permissions from a - user/group/world component then you may either highlight the - component and click the Remove button, + dialog before clicking on OK.

If you wish to remove all permissions from a + user/group/world component, you may either highlight the + component and click on the Remove button, or set the component to only have the special Take - Ownership permission (displayed as "O" - ) highlighted.

Interaction with the standard Samba create mask - parameters

There are four parameters - to control interaction with the standard Samba create mask parameters. - These are : + Ownership permission (displayed as O + ) highlighted.

Interaction with the Standard Samba “create mask” Parameters

There are four parameters that control interaction with the standard Samba create mask parameters. + These are: -

  • security mask

  • force security mode

  • directory security mask

  • force directory security mode

+

  • security mask
  • force security mode
  • directory security mask
  • force directory security mode

-

Once a user clicks OK to apply the - permissions Samba maps the given permissions into a user/group/world - r/w/x triplet set, and then will check the changed permissions for a +

Once a user clicks on OK to apply the + permissions, Samba maps the given permissions into a user/group/world + r/w/x triplet set, and then checks the changed permissions for a file against the bits set in the - security mask parameter. Any bits that - were changed that are not set to '1' in this parameter are left alone - in the file permissions.

Essentially, zero bits in the security mask - mask may be treated as a set of bits the user is not + security mask parameter. Any bits that + were changed that are not set to “1” in this parameter are left alone + in the file permissions.

Essentially, zero bits in the security mask + may be treated as a set of bits the user is not allowed to change, and one bits are those the user is allowed to change. -

If not set explicitly this parameter is set to the same value as - the create mask parameter. To allow a user to modify all the - user/group/world permissions on a file, set this parameter - to 0777.

Next Samba checks the changed permissions for a file against - the bits set in the - force security mode parameter. Any bits - that were changed that correspond to bits set to '1' in this parameter - are forced to be set.

Essentially, bits set in the force security mode - parameter may be treated as a set of bits that, when - modifying security on a file, the user has always set to be 'on'.

If not set explicitly this parameter is set to the same value - as the force create mode parameter. +

If not explicitly set, this parameter defaults to the same value as + the create mask parameter. To allow a user to modify all the + user/group/world permissions on a file, set this parameter to 0777. +

Next Samba checks the changed permissions for a file against the bits set in the + force security mode parameter. Any bits + that were changed that correspond to bits set to “1” in this parameter + are forced to be set.

Essentially, bits set in the force security mode parameter + may be treated as a set of bits that, when modifying security on a file, the user has always set to be “on”.

If not explicitly set, this parameter defaults to the same value + as the force create mode parameter. To allow a user to modify all the user/group/world permissions on a file - with no restrictions set this parameter to 000.

The security mask and force + with no restrictions set this parameter to 000. The + security mask and force security mode parameters are applied to the change - request in that order.

For a directory Samba will perform the same operations as - described above for a file except using the parameter + request in that order.

For a directory, Samba will perform the same operations as + described above for a file except it uses the parameter directory security mask instead of security mask, and force directory security mode parameter instead of force security mode - .

The directory security mask parameter + .

The directory security mask parameter by default is set to the same value as the directory mask parameter and the force directory security mode parameter by default is set to the same value as - the force directory mode parameter.

In this way Samba enforces the permission restrictions that - an administrator can set on a Samba share, whilst still allowing users + the force directory mode parameter. + In this way Samba enforces the permission restrictions that + an administrator can set on a Samba share, while still allowing users to modify the permission bits within that restriction.

If you want to set up a share that allows users full control in modifying the permission bits on their files and directories and - doesn't force any particular bits to be set 'on', then set the following - parameters in the smb.conf file in that share specific section : -

security mask = 0777
force security mode = 0
directory security mask = 0777
force directory security mode = 0

Interaction with the standard Samba file attribute mapping

Note

Samba maps some of the DOS attribute bits (such as "read - only") into the UNIX permissions of a file. This means there can + does not force any particular bits to be set “on”, then set the following + parameters in the smb.conf file in that share-specific section: +

security mask = 0777
force security mode = 0
directory security mask = 0777
force directory security mode = 0

Interaction with the Standard Samba File Attribute Mapping

Note

Samba maps some of the DOS attribute bits (such as “read + only”) into the UNIX permissions of a file. This means there can be a conflict between the permission bits set via the security dialog and the permission bits set by the file attribute mapping. -

One way this can show up is if a file has no UNIX read access - for the owner it will show up as "read only" in the standard - file attributes tabbed dialog. Unfortunately this dialog is - the same one that contains the security info in another tab.

What this can mean is that if the owner changes the permissions - to allow themselves read access using the security dialog, clicks +

If a file has no UNIX read access for the owner, it will show up + as “read only” in the standard file attributes tabbed dialog. + Unfortunately, this dialog is the same one that contains the security information + in another tab.

What this can mean is that if the owner changes the permissions + to allow himself read access using the security dialog, clicks on OK to get back to the standard attributes tab - dialog, and then clicks OK on that dialog, then + dialog, and clicks on OK on that dialog, then NT will set the file permissions back to read-only (as that is what the attributes still say in the dialog). This means that after setting - permissions and clicking OK to get back to the - attributes dialog you should always hit Cancel + permissions and clicking on OK to get back to the + attributes dialog, you should always press Cancel rather than OK to ensure that your changes - are not overridden.

Common Errors

-File, Directory and Share access problems are very common on the mailing list. The following + are not overridden.

Common Errors

+File, directory and share access problems are common on the mailing list. The following are examples taken from the mailing list in recent times. -

Users can not write to a public share

+

Users Cannot Write to a Public Share

- We are facing some troubles with file / directory permissions. I can log on the domain as admin user(root), - and there's a public share, on which everyone needs to have permission to create / modify files, but only - root can change the file, no one else can. We need to constantly go to server to + We are facing some troubles with file/directory permissions. I can log on the domain as admin user(root), + and there's a public share on which everyone needs to have permission to create/modify files, but only + root can change the file, no one else can. We need to constantly go to the server to chgrp -R users * and chown -R nobody * to allow others users to change the file.

- There are many ways to solve this problem, here are a few hints: + There are many ways to solve this problem and here are a few hints:

  1. - Go to the top of the directory that is shared + Go to the top of the directory that is shared.

  2. Set the ownership to what ever public owner and group you want

    @@ -570,7 +578,7 @@ are examples taken from the mailing list in recent times.
     $ find 'directory_name' -type f -exec chown user.group {}\;
     

    Note

    - The above will set the 'sticky bit' on all directories. Read your + The above will set the sticky bit on all directories. Read your UNIX/Linux man page on what that does. It causes the OS to assign to all files created in the directories the ownership of the directory. @@ -580,10 +588,13 @@ are examples taken from the mailing list in recent times.

     $ chown jack.engr /foodbar
     

    -

    Note

    This is the same as doing:

    +			

    Note

    +

    This is the same as doing:

    +

     $ chown jack /foodbar
     $ chgrp engr /foodbar
    -
  3. Now do: +

    +

  • Now type:

     $ chmod 6775 /foodbar
    @@ -594,7 +605,7 @@ are examples taken from the mailing list in recent times.
     

     drwsrwsr-x  2 jack  engr    48 2003-02-04 09:55 foodbar
     

    -

  • Now do: +

  • Now type:

     $ su - jill
     $ cd /foodbar
    @@ -611,31 +622,31 @@ drwsrwsr-x  2 jack  engr    48 2003-02-04 09:55 foodbar
     		Now in your smb.conf for the share add:
     		

    force create mode = 0775
    force direcrtory mode = 6775

    Note

    - The above are only needed if your users are not members of the group - you have used. ie: Within the OS do not have write permission on the directory. + These procedures are needed only if your users are not members of the group + you have used. That is if within the OS do not have write permission on the directory.

    An alternative is to set in the smb.conf entry for the share:

    force user = jack
    force group = engr

    -

  • I have set force user but Samba still makes root the owner of all the files I touch!

    - When you have a user in admin users, samba will always do file operations for - this user as root, even if force user has been set. -

    MS Word with Samba changes owner of file

    - Question:When userB saves a word document that is owned by userA the updated file is now owned by userB. +

    File Operations Done as root with force user Set

    + When you have a user in admin users, Samba will always do file operations for + this user as root, even if force user has been set. +

    MS Word with Samba Changes Owner of File

    + Question:When user B saves a word document that is owned by user A the updated file is now owned by user B. Why is Samba doing this? How do I fix this?

    - Answer: Word does the following when you modify/change a Word document: Word Creates a NEW document with + Answer: Word does the following when you modify/change a Word document: MS Word creates a NEW document with a temporary name, Word then closes the old document and deletes it, Word then renames the new document to the original document name. - There is NO mechanism by which Samba CAN IN ANY WAY know that the new document really should be owned by the owners - of the original file. Samba has no way of knowing that the file will be renamed by MS Word. As far as Samba is able + There is no mechanism by which Samba can in any way know that the new document really should be owned by the owners + of the original file. Samba has no way of knowing that the file will be renamed by MS Word. As far as Samba is able to tell, the file that gets created is a NEW file, not one that the application (Word) is updating.

    There is a work-around to solve the permissions problem. That work-around involves understanding how you can manage file - system behaviour from within the smb.conf file, as well as understanding how Unix file systems work. Set on the directory - in which you are changing word documents: chmod g+s 'directory_name' This ensures that all files will - be created with the group that owns the directory. In smb.conf share declaration section set: + system behavior from within the smb.conf file, as well as understanding how UNIX file systems work. Set on the directory + in which you are changing Word documents: chmod g+s `directory_name' This ensures that all files will + be created with the group that owns the directory. In smb.conf share declaration section set:

    force create mode = 0660
    force directory mode = 0770

    These two settings will ensure that all directories and files that get created in the share will be read/writable by the owner and group set on the directory itself. -

    +

    diff --git a/docs/htmldocs/AdvancedNetworkManagement.html b/docs/htmldocs/AdvancedNetworkManagement.html index 1052f45e92..aa13cd37ee 100644 --- a/docs/htmldocs/AdvancedNetworkManagement.html +++ b/docs/htmldocs/AdvancedNetworkManagement.html @@ -1,137 +1,132 @@ -Chapter 22. Advanced Network Management

    Chapter 22. Advanced Network Management

    John H. Terpstra

    Samba Team

    April 3 2003

    +Chapter 22. Advanced Network Management

    Chapter 22. Advanced Network Management

    John H. Terpstra

    Samba Team

    April 3 2003

    This section documents peripheral issues that are of great importance to network administrators who want to improve network resource access control, to automate the user -environment, and to make their lives a little easier. -

    Features and Benefits

    +environment and to make their lives a little easier. +

    Features and Benefits

    Often the difference between a working network environment and a well appreciated one can -best be measured by the little things that makes everything work more -harmoniously. A key part of every network environment solution is the ability to remotely -manage MS Windows workstations, to remotely access the Samba server, to provide customised -logon scripts, as well as other house keeping activities that help to sustain more reliable +best be measured by the little things that make everything work more +harmoniously. A key part of every network environment solution is the +ability to remotely +manage MS Windows workstations, remotely access the Samba server, provide customized +logon scripts, as well as other housekeeping activities that help to sustain more reliable network operations.

    -This chapter presents information on each of these area. They are placed here, and not in +This chapter presents information on each of these areas. They are placed here, and not in other chapters, for ease of reference. -

    Remote Server Administration

    -How do I get 'User Manager' and 'Server Manager'? +

    Remote Server Administration

    How do I get `User Manager' and `Server Manager'?

    + + + +Since I do not need to buy an NT4 Server, how do I get the `User Manager for Domains' +and the `Server Manager'?

    - Since I don't need to buy an NT4 Server, how do I get the 'User Manager for Domains', -the 'Server Manager'? + +Microsoft distributes a version of these tools called Nexus.exe for installation +on Windows 9x/Me systems. The tools set includes: +

    • Server Manager
    • User Manager for Domains
    • Event Viewer

    +Download the archived file at ftp://ftp.microsoft.com/Softlib/MSLFILES/NEXUS.EXE.

    -Microsoft distributes a version of these tools called nexus for installation -on Windows 9x / Me systems. The tools set includes: -

    Server Manager
    User Manager for Domains
    Event Viewer

    -Click here to download the archived file ftp://ftp.microsoft.com/Softlib/MSLFILES/NEXUS.EXE -

    -The Windows NT 4.0 version of the 'User Manager for -Domains' and 'Server Manager' are available from Microsoft via ftp -from ftp://ftp.microsoft.com/Softlib/MSLFILES/SRVTOOLS.EXE -

    Remote Desktop Management

    + +The Windows NT 4.0 version of the `User Manager for +Domains' and `Server Manager' are available from Microsoft via ftp. +

    Remote Desktop Management

    There are a number of possible remote desktop management solutions that range from free -through costly. Do not let that put you off. Sometimes the most costly solutions is the +through costly. Do not let that put you off. Sometimes the most costly solution is the most cost effective. In any case, you will need to draw your own conclusions as to which is the best tool in your network environment. -

    Remote Management from NoMachines.Com

    +

    Remote Management from NoMachine.Com

    + The following information was posted to the Samba mailing list at Apr 3 23:33:50 GMT 2003. It is presented in slightly edited form (with author details omitted for privacy reasons). The entire answer is reproduced below with some comments removed. -

    -

    -> I have a wonderful linux/samba server running as PDC for a network.
    -> Now I would like to add remote desktop capabilities so that
    -> users outside could login to the system and get their desktop up from
    -> home or another country..
    ->
    -> Is there a way to accomplish this? Do I need a windows terminal server?
    -> Do I need to configure it so that it is a member of the domain or a
    -> BDC,PDC? Are there any hacks for MS Windows XP to enable remote login
    -> even if the computer is in a domain?
    ->
    -> Any ideas/experience would be appreciated :)
    -

    -

    - Answer provided: Check out the new offer from NoMachine, "NX" software: - http://www.nomachine.com/. -

    - It implements a very easy-to-use interface to the remote X protocol as +

    + I have a wonderful Linux/Samba server running as pdc for a network. Now I would like to add remote + desktop capabilities so users outside could login to the system and get their desktop up from home or + another country. +

    + Is there a way to accomplish this? Do I need a Windows Terminal Server? Do I need to configure it so + it is a member of the domain or a BDC,PDC? Are there any hacks for MS Windows XP to enable remote login + even if the computer is in a domain? +

    + Answer provided: Check out the new offer from NoMachine, “NX” software: + http://www.nomachine.com/. +

    + It implements an easy-to-use interface to the Remote X protocol as well as incorporating VNC/RFB and rdesktop/RDP into it, but at a speed - performance much better than anything you may have ever seen... + performance much better than anything you may have ever seen.

    - Remote X is not new at all -- but what they did achieve successfully is - a new way of compression and caching technologies which makes the thing + Remote X is not new at all, but what they did achieve successfully is + a new way of compression and caching technologies that makes the thing fast enough to run even over slow modem/ISDN connections.

    - I could test drive their (public) RedHat machine in Italy, over a loaded - internet connection, with enabled thumbnail previews in KDE konqueror - which popped up immediately on "mouse-over". From inside that (remote X) + I could test drive their (public) Red Hat machine in Italy, over a loaded + Internet connection, with enabled thumbnail previews in KDE konqueror + which popped up immediately on “mouse-over”. From inside that (remote X) session I started a rdesktop session on another, a Windows XP machine. - To test the performance, I played Pinball. I am proud to announce here - that my score was 631750 points at first try... + To test the performance, I played Pinball. I am proud to announce + that my score was 631750 points at first try.

    - NX performs better on my local LAN than any of the other "pure" + NX performs better on my local LAN than any of the other “pure” connection methods I am using from time to time: TightVNC, rdesktop or - remote X. It is even faster than a direct crosslink connection between + Remote X. It is even faster than a direct crosslink connection between two nodes.

    - I even got sound playing from the remote X app to my local boxes, and - had a working "copy'n'paste" from an NX window (running a KDE session - in Italy) to my Mozilla mailing agent... These guys are certainly doing + I even got sound playing from the Remote X app to my local boxes, and + had a working “copy'n'paste” from an NX window (running a KDE session + in Italy) to my Mozilla mailing agent. These guys are certainly doing something right!

    - I recommend to test drive NX to anybody with a only a remote interest - in remote computing - http://www.nomachine.com/testdrive.php. + I recommend to test drive NX to anybody with a only a passing interest in remote computing + http://www.nomachine.com/testdrive.php.

    - Just download the free of charge client software (available for RedHat, - SuSE, Debian and Windows) and be up and running within 5 minutes (they + Just download the free of charge client software (available for Red Hat, + SuSE, Debian and Windows) and be up and running within five minutes (they need to send you your account data, though, because you are assigned - a real Unix account on their testdrive.nomachine.com box... + a real UNIX account on their testdrive.nomachine.com box.

    They plan to get to the point were you can have NX application servers running as a cluster of nodes, and users simply start an NX session locally, and can select applications to run transparently (apps may even run on another NX node, but pretend to be on the same as used for initial login, - because it displays in the same window.... well, you also can run it + because it displays in the same window. You also can run it fullscreen, and after a short time you forget that it is a remote session at all).

    - Now the best thing at the end: all the core compression and caching + Now the best thing for last: All the core compression and caching technologies are released under the GPL and available as source code to anybody who wants to build on it! These technologies are working, albeit started from the command line only (and very inconvenient to - use in order to get a fully running remote X session up and running....) + use in order to get a fully running remote X session up and running.)

    To answer your questions:

    • - You don't need to install a terminal server; XP has RDP support built in. + You do not need to install a terminal server; XP has RDP support built in.

    • - NX is much cheaper than Citrix -- and comparable in performance, probably faster + NX is much cheaper than Citrix and comparable in performance, probably faster.

    • - You don't need to hack XP -- it just works + You do not need to hack XP it just works.

    • You log into the XP box from remote transparently (and I think there is no - need to change anything to get a connection, even if authentication is against a domain) + need to change anything to get a connection, even if authentication is against a domain).

    • - The NX core technologies are all Open Source and released under the GPL -- - you can today use a (very inconvenient) commandline to use it at no cost, - but you can buy a comfortable (proprietary) NX GUI frontend for money + The NX core technologies are all Open Source and released under the GPL + you can now use a (very inconvenient) commandline at no cost, + but you can buy a comfortable (proprietary) NX GUI frontend for money.

    • NoMachine are encouraging and offering help to OSS/Free Software implementations for such a frontend too, even if it means competition to them (they have written - to this effect even to the LTSP, KDE and GNOME developer mailing lists) -

    Network Logon Script Magic

    -This section needs work. Volunteer contributions most welcome. Please send your patches or updates -to John Terpstra. -

    + to this effect even to the LTSP, KDE and GNOME developer mailing lists). +

    Network Logon Script Magic

    There are several opportunities for creating a custom network startup configuration environment. -

    No Logon Script
    Simple universal Logon Script that applies to all users
    Use of a conditional Logon Script that applies per user or per group attributes
    Use of Samba's Preexec and Postexec functions on access to the NETLOGON share to create - a custom Logon Script and then execute it.
    User of a tool such as KixStart

    +

    • No Logon Script.
    • Simple universal Logon Script that applies to all users.
    • Use of a conditional Logon Script that applies per user or per group attributes.
    • Use of Samba's preexec and postexec functions on access to the NETLOGON share to create + a custom logon script and then execute it.
    • User of a tool such as KixStart.

    The Samba source code tree includes two logon script generation/execution tools. See examples directory genlogon and ntlogon subdirectories.

    The following listings are from the genlogon directory.

    + This is the genlogon.pl file:

    @@ -140,8 +135,8 @@ This is the genlogon.pl file:
     	# genlogon.pl
     	#
     	# Perl script to generate user logon scripts on the fly, when users
    -	# connect from a Windows client.  This script should be called from smb.conf
    -	# with the %U, %G and %L parameters. I.e:
    +	# connect from a Windows client. This script should be called from 
    +	# smb.conf with the %U, %G and %L parameters. I.e:
     	#
     	#       root preexec = genlogon.pl %U %G %L
     	#
    @@ -161,64 +156,62 @@ This is the genlogon.pl file:
     	# Log client connection
     	#($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime(time);
     	($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime(time);
    -	open LOG, ">>/var/log/samba/netlogon.log";
    -	print LOG "$mon/$mday/$year $hour:$min:$sec - User $ARGV[0] logged into $ARGV[1]\n";
    +	open LOG, ">>/var/log/samba/netlogon.log";
    +	print LOG "$mon/$mday/$year $hour:$min:$sec";
    +	print LOG " - User $ARGV[0] logged into $ARGV[1]\n";
     	close LOG;
     
     	# Start generating logon script
    -	open LOGON, ">/shared/netlogon/$ARGV[0].bat";
    -	print LOGON "\@ECHO OFF\r\n";
    +	open LOGON, ">/shared/netlogon/$ARGV[0].bat";
    +	print LOGON "\@ECHO OFF\r\n";
     
     	# Connect shares just use by Software Development group
    -	if ($ARGV[1] eq "SOFTDEV" || $ARGV[0] eq "softdev")
    +	if ($ARGV[1] eq "SOFTDEV" || $ARGV[0] eq "softdev")
     	{
    -		print LOGON "NET USE M: \\\\$ARGV[2]\\SOURCE\r\n";
    +		print LOGON "NET USE M: \\\\$ARGV[2]\\SOURCE\r\n";
     	}
     
     	# Connect shares just use by Technical Support staff
    -	if ($ARGV[1] eq "SUPPORT" || $ARGV[0] eq "support")
    +	if ($ARGV[1] eq "SUPPORT" || $ARGV[0] eq "support")
     	{
    -		print LOGON "NET USE S: \\\\$ARGV[2]\\SUPPORT\r\n";
    +		print LOGON "NET USE S: \\\\$ARGV[2]\\SUPPORT\r\n";
     	}
     
     	# Connect shares just used by Administration staff
    -	If ($ARGV[1] eq "ADMIN" || $ARGV[0] eq "admin")
    +	If ($ARGV[1] eq "ADMIN" || $ARGV[0] eq "admin")
     	{
    -		print LOGON "NET USE L: \\\\$ARGV[2]\\ADMIN\r\n";
    -		print LOGON "NET USE K: \\\\$ARGV[2]\\MKTING\r\n";
    +		print LOGON "NET USE L: \\\\$ARGV[2]\\ADMIN\r\n";
    +		print LOGON "NET USE K: \\\\$ARGV[2]\\MKTING\r\n";
     	}
     
    -	# Now connect Printers.  We handle just two or three users a little
    +	# Now connect Printers. We handle just two or three users a little
     	# differently, because they are the exceptions that have desktop
     	# printers on LPT1: - all other user's go to the LaserJet on the
     	# server.
     	if ($ARGV[0] eq 'jim'
     	    || $ARGV[0] eq 'yvonne')
     	{
    -		print LOGON "NET USE LPT2: \\\\$ARGV[2]\\LJET3\r\n";
    -		print LOGON "NET USE LPT3: \\\\$ARGV[2]\\FAXQ\r\n";
    +		print LOGON "NET USE LPT2: \\\\$ARGV[2]\\LJET3\r\n";
    +		print LOGON "NET USE LPT3: \\\\$ARGV[2]\\FAXQ\r\n";
     	}
     	else
     	{
    -		print LOGON "NET USE LPT1: \\\\$ARGV[2]\\LJET3\r\n";
    -		print LOGON "NET USE LPT3: \\\\$ARGV[2]\\FAXQ\r\n";
    +		print LOGON "NET USE LPT1: \\\\$ARGV[2]\\LJET3\r\n";
    +		print LOGON "NET USE LPT3: \\\\$ARGV[2]\\FAXQ\r\n";
     	}
     
     	# All done! Close the output file.
     	close LOGON;
     

    -Those wishing to use more elaborate or capable logon processing system should check out the following sites: -

    http://www.craigelachie.org/rhacer/ntlogon
    http://www.kixtart.org
    http://support.microsoft.com/default.asp?scid=kb;en-us;189105

    Adding printers without user intervention

    +Those wishing to use more elaborate or capable logon processing system should check out these sites: +

    • http://www.craigelachi.e.org/rhacer/ntlogon
    • http://www.kixtart.org

    Adding Printers without User Intervention

    + Printers may be added automatically during logon script processing through the use of: -

    -	rundll32 printui.dll,PrintUIEntry /?
    +

    +C:\> rundll32 printui.dll,PrintUIEntry /?
     

    -See the documentation in the Microsoft knowledgebase article no: 189105. -

    Common Errors

    -The information provided in this chapter has been reproduced from postings on the samba@samba.org -mailing list. No implied endorsement or recommendation is offered. Administrators should conduct -their own evaluation of alternatives and are encouraged to draw their own conclusions. -

    +See the documentation in the Microsoft knowledgebase article 189105. +

    diff --git a/docs/htmldocs/Appendixes.html b/docs/htmldocs/Appendixes.html index 6d77a0ba65..c2e126377e 100644 --- a/docs/htmldocs/Appendixes.html +++ b/docs/htmldocs/Appendixes.html @@ -1,3 +1 @@ -Part VI. Appendixes +Part VI. Appendixes diff --git a/docs/htmldocs/Backup.html b/docs/htmldocs/Backup.html index f19bd6d2b3..aa573dfdb7 100644 --- a/docs/htmldocs/Backup.html +++ b/docs/htmldocs/Backup.html @@ -1,11 +1,11 @@ -Chapter 28. Samba Backup Techniques

    Chapter 28. Samba Backup Techniques

    John H. Terpstra

    Samba Team

    Table of Contents

    Note
    Features and Benefits

    Note

    +Chapter 28. Samba Backup Techniques

    Chapter 28. Samba Backup Techniques

    John H. Terpstra

    Samba Team

    Table of Contents

    Note
    Features and Benefits

    Note

    This chapter did not make it into this release. It is planned for the published release of this document. -

    Features and Benefits

    +

    Features and Benefits

    We need feedback from people who are backing up samba servers. We would like to know what software tools you are using to backup your samba server/s.

    In particular, if you have any success and / or failure stories you could share with other users this would be appreciated. -

    +

    diff --git a/docs/htmldocs/CUPS-printing.html b/docs/htmldocs/CUPS-printing.html index 8bfe11405f..19c9d7a021 100644 --- a/docs/htmldocs/CUPS-printing.html +++ b/docs/htmldocs/CUPS-printing.html @@ -1,94 +1,67 @@ -Chapter 19. CUPS Printing Support in Samba 3.0

    Chapter 19. CUPS Printing Support in Samba 3.0

    Kurt Pfeifle

    Danka Deutschland GmbH

    Ciprian Vizitiu

    drawings

    Jelmer R. Vernooij

    drawings
    The Samba Team

    (3 June 2003)

    Table of Contents

    Introduction
    Features and Benefits
    Overview
    Basic Configuration of CUPS support
    Linking of smbd with libcups.so
    Simple smb.conf Settings for CUPS
    More complex smb.conf Settings for -CUPS
    Advanced Configuration
    Central spooling vs. "Peer-to-Peer" printing
    CUPS/Samba as a "spooling-only" Print Server; "raw" printing -with Vendor Drivers on Windows Clients
    Driver Installation Methods on Windows Clients
    Explicitly enable "raw" printing for -application/octet-stream!
    Three familiar Methods for driver upload plus a new one
    Using CUPS/Samba in an advanced Way -- intelligent printing -with PostScript Driver Download
    GDI on Windows -- PostScript on UNIX
    Windows Drivers, GDI and EMF
    UNIX Printfile Conversion and GUI Basics
    PostScript and Ghostscript
    Ghostscript -- the Software RIP for non-PostScript Printers
    PostScript Printer Description (PPD) Specification
    CUPS can use all Windows-formatted Vendor PPDs
    CUPS also uses PPDs for non-PostScript Printers
    The CUPS Filtering Architecture
    MIME types and CUPS Filters
    MIME type Conversion Rules
    Filter Requirements
    Prefilters
    pstops
    pstoraster
    imagetops and imagetoraster
    rasterto [printers specific]
    CUPS Backends
    cupsomatic/Foomatic -- how do they fit into the Picture?
    The Complete Picture
    mime.convs
    "Raw" printing
    "application/octet-stream" printing
    PostScript Printer Descriptions (PPDs) for non-PS Printers
    Difference between cupsomatic/foomatic-rip and -native CUPS printing
    Examples for filtering Chains
    Sources of CUPS drivers / PPDs
    Printing with Interface Scripts
    Network printing (purely Windows)
    From Windows Clients to an NT Print Server
    Driver Execution on the Client
    Driver Execution on the Server
    Network Printing (Windows clients -- UNIX/Samba Print -Servers)
    From Windows Clients to a CUPS/Samba Print Server
    Samba receiving Jobfiles and passing them to CUPS
    Network PostScript RIP: CUPS Filters on Server -- clients use -PostScript Driver with CUPS-PPDs
    PPDs for non-PS Printers on UNIX
    PPDs for non-PS Printers on Windows
    Windows Terminal Servers (WTS) as CUPS Clients
    Printer Drivers running in "Kernel Mode" cause many -Problems
    Workarounds impose Heavy Limitations
    CUPS: a "Magical Stone"?
    PostScript Drivers with no major problems -- even in Kernel -Mode
    Setting up CUPS for driver Download
    cupsaddsmb: the unknown Utility
    Prepare your smb.conf for cupsaddsmb
    CUPS Package of "PostScript Driver for WinNT/2k/XP"
    Recognize the different Driver Files
    Acquiring the Adobe Driver Files
    ESP Print Pro Package of "PostScript Driver for -WinNT/2k/XP"
    Caveats to be considered
    Benefits of using "CUPS PostScript Driver for -Windows NT/2k/XP" instead of Adobe Driver
    Run "cupsaddsmb" (quiet Mode)
    Run "cupsaddsmb" with verbose Output
    Understanding cupsaddsmb
    How to recognize if cupsaddsmb completed successfully
    cupsaddsmb with a Samba PDC
    cupsaddsmb Flowchart
    Installing the PostScript Driver on a Client
    Avoiding critical PostScript Driver Settings on the -Client
    Installing PostScript Driver Files manually (using -rpcclient)
    A Check of the rpcclient man Page
    Understanding the rpcclient man page
    Producing an Example by querying a Windows Box
    What is required for adddriver and setdriver to succeed
    Manual Driver Installation in 15 Steps
    Troubleshooting revisited
    The printing *.tdb Files
    Trivial DataBase Files
    Binary Format
    Losing *.tdb Files
    Using tdbbackup
    CUPS Print Drivers from Linuxprinting.org
    foomatic-rip and Foomatic explained
    foomatic-rip and Foomatic-PPD Download and Installation
    Page Accounting with CUPS
    Setting up Quotas
    Correct and incorrect Accounting
    Adobe and CUPS PostScript Drivers for Windows Clients
    The page_log File Syntax
    Possible Shortcomings
    Future Developments
    Other Accounting Tools
    Additional Material
    Auto-Deletion or Preservation of CUPS Spool Files
    CUPS Configuration Settings explained
    Pre-conditions
    Manual Configuration
    In Case of Trouble.....
    Printing from CUPS to Windows attached -Printers
    More CUPS filtering Chains
    Common Errors
    Win9x client can't install driver
    "cupsaddsmb" keeps asking for root password in - neverending loop
    "cupsaddsmb" gives "No PPD file for printer..." - message while PPD file is present
    Client can't connect to Samba printer
    Can't reconnect to Samba under new account - from Win2K/XP
    Avoid being connected to the Samba server as the - "wrong" user
    Upgrading to CUPS drivers from Adobe drivers on - NT/2K/XP clients gives problems
    Can't use "cupsaddsmb" on Samba server which is - a PDC
    Deleted Win2K printer driver is still shown
    Win2K/XP "Local Security - Policies"
    WinXP clients: "Administrator can not install - printers for all local users"
    "Print Change Notify" functions on - NT-clients
    WinXP-SP1
    Print options for all users can't be set on Win2K/XP
    Most common blunders in driver - settings on Windows clients
    cupsaddsmb does not work - with newly installed printer
    Permissions on -/var/spool/samba/ get reset after each -reboot
    Printer named "lp" -intermittently swallows jobs and spits out completely different -ones
    Location of Adobe PostScript driver files necessary for "cupsaddsmb"
    An Overview of the CUPS Printing Processes

    Introduction

    Features and Benefits

    - The Common UNIX Print System (CUPS) has become very popular. All - major Linux distributions now ship it as their default printing - system. To many it is still a very mystical tool. Mostly, it - "just works" (TM). People tend to regard it as a "black box" - which they don't want to look into, as long as it works. But once - there is a little problem, they are in trouble to find out where to - start debugging it. Refer to the "Classical Printing" chapter also, it - contains a lot of information that is relevant for CUPS. +Chapter 19. CUPS Printing Support

    Chapter 19. CUPS Printing Support

    Kurt Pfeifle

    Danka Deutschland GmbH

    Ciprian Vizitiu

    drawings

    Jelmer R. Vernooij

    drawings
    The Samba Team

    (3 June 2003)

    Table of Contents

    Introduction
    Features and Benefits
    Overview
    Basic CUPS Support Configuration
    Linking smbd with libcups.so
    Simple smb.conf Settings for CUPS
    More Complex CUPS smb.conf Settings
    Advanced Configuration
    Central Spooling vs. Peer-to-Peer Printing
    Raw Print Serving Vendor Drivers on Windows Clients
    Installation of Windows Client Drivers
    Explicitly Enable raw Printing for application/octet-stream
    Driver Upload Methods
    Advanced Intelligent Printing with PostScript Driver Download
    GDI on Windows -- PostScript on UNIX
    Windows Drivers, GDI and EMF
    UNIX Printfile Conversion and GUI Basics
    PostScript and Ghostscript
    Ghostscript the Software RIP for Non-PostScript Printers
    PostScript Printer Description (PPD) Specification
    Using Windows-Formatted Vendor PPDs
    CUPS Also Uses PPDs for Non-PostScript Printers
    The CUPS Filtering Architecture
    MIME Types and CUPS Filters
    MIME Type Conversion Rules
    Filtering Overview
    Prefilters
    pstops
    pstoraster
    imagetops and imagetoraster
    rasterto [printers specific]
    CUPS Backends
    The Role of cupsomatic/foomatic
    The Complete Picture
    mime.convs
    Raw Printing
    application/octet-stream Printing
    PostScript Printer Descriptions (PPDs) for Non-PS Printers
    cupsomatic/foomatic-rip Versus native CUPS Printing
    Examples for Filtering Chains
    Sources of CUPS Drivers/PPDs
    Printing with Interface Scripts
    Network Printing (Purely Windows)
    From Windows Clients to an NT Print Server
    Driver Execution on the Client
    Driver Execution on the Server
    Network Printing (Windows Clients UNIX/Samba Print +Servers)
    From Windows Clients to a CUPS/Samba Print Server
    Samba Receiving Jobfiles and Passing Them to CUPS
    Network PostScript RIP
    PPDs for Non-PS Printers on UNIX
    PPDs for Non-PS Printers on Windows
    Windows Terminal Servers (WTS) as CUPS Clients
    Printer Drivers Running in Kernel Mode Cause Many +Problems
    Workarounds Impose Heavy Limitations
    CUPS: A Magical Stone?
    PostScript Drivers with No Major Problems Even in Kernel +Mode
    Configuring CUPS for Driver Download
    cupsaddsmb: The Unknown Utility
    Prepare Your smb.conf for cupsaddsmb
    CUPS PostScript Driver for Windows NT/200x/XP
    Recognizing Different Driver Files
    Acquiring the Adobe Driver Files
    ESP Print Pro PostScript Driver for Windows NT/200x/XP
    Caveats to be Considered
    Windows CUPS PostScript Driver Versus Adobe Driver
    Run cupsaddsmb (Quiet Mode)
    Run cupsaddsmb with Verbose Output
    Understanding cupsaddsmb
    How to Recognize If cupsaddsmb Completed Successfully
    cupsaddsmb with a Samba PDC
    cupsaddsmb Flowchart
    Installing the PostScript Driver on a Client
    Avoiding Critical PostScript Driver Settings on the Client
    Installing PostScript Driver Files Manually Using rpcclient
    A Check of the rpcclient man Page
    Understanding the rpcclient man Page
    Producing an Example by Querying a Windows Box
    Requirements for adddriver and setdriver to Succeed
    Manual Driver Installation in 15 Steps
    Troubleshooting Revisited
    The Printing *.tdb Files
    Trivial Database Files
    Binary Format
    Losing *.tdb Files
    Using tdbbackup
    CUPS Print Drivers from Linuxprinting.org
    foomatic-rip and Foomatic Explained
    foomatic-rip and Foomatic-PPD Download and Installation
    Page Accounting with CUPS
    Setting Up Quotas
    Correct and Incorrect Accounting
    Adobe and CUPS PostScript Drivers for Windows Clients
    The page_log File Syntax
    Possible Shortcomings
    Future Developments
    Additional Material
    Auto-Deletion or Preservation of CUPS Spool Files
    CUPS Configuration Settings Explained
    Pre-Conditions
    Manual Configuration
    Printing from CUPS to Windows Attached Printers
    More CUPS-Filtering Chains
    Common Errors
    Windows 9x/ME Client Can't Install Driver
    cupsaddsmb Keeps Asking for Root Password in Never-ending Loop
    cupsaddsmb Errors
    Client Can't Connect to Samba Printer
    New Account Reconnection from Windows 200x/XP Troubles
    Avoid Being Connected to the Samba Server as the Wrong User
    Upgrading to CUPS Drivers from Adobe Drivers
    Can't Use cupsaddsmb on Samba Server Which Is a PDC
    Deleted Windows 200x Printer Driver Is Still Shown
    Windows 200x/XP "Local Security Policies"
    Administrator Cannot Install Printers for All Local Users
    Print Change Notify Functions on NT-clients
    WinXP-SP1
    Print Options for All Users Can't Be Set on Windows 200x/XP
    Most Common Blunders in Driver Settings on Windows Clients
    cupsaddsmb Does Not Work with Newly Installed Printer
    Permissions on /var/spool/samba/ Get Reset After Each Reboot
    Print Queue Called lp Mis-handles Print Jobs
    Location of Adobe PostScript Driver Files for cupsaddsmb
    Overview of the CUPS Printing Processes

    Introduction

    Features and Benefits

    + The Common UNIX Print System (CUPS) + has become quite popular. All major Linux distributions now ship it as their default printing + system. To many, it is still a mystical tool. Mostly, it just works. + People tend to regard it as a “black box” + that they do not want to look into as long as it works. But once + there is a little problem, they are in trouble to find out where to + start debugging it. Refer to the chapter “Classical Printing” that + contains a lot of information that is relevant for CUPS.

    - CUPS sports quite a few unique and powerful features. While their - basic functions may be grasped quite easily, they are also - new. Because they are different from other, more traditional printing - systems, it is best to try and not apply any prior knowledge about - printing upon this new system. Rather, try to understand CUPS - from the beginning. This documentation will lead you to a - complete understanding of CUPS. Let's start with the most basic - things first. -

    Overview

    - CUPS is more than just a print spooling system. It is a complete - printer management system that complies with the new IPP - (Internet Printing Protocol). IPP is an industry - and IETF (Internet Engineering Task Force) - standard for network printing. Many of its functions can be managed - remotely (or locally) via a web browser (giving you a - platform-independent access to the CUPS print server). Additionally, it - has the traditional command line and several more modern GUI interfaces - (GUI interfaces developed by 3rd parties, like KDE's - overwhelming KDEPrint). + CUPS sports quite a few unique and powerful features. While their + basic functions may be grasped quite easily, they are also + new. Because they are different from other, more traditional printing + systems, it is best not to try and apply any prior knowledge about + printing to this new system. Rather, try to understand CUPS + from the beginning. This documentation will lead you to a + complete understanding of CUPS. Let's start with the most basic + things first. +

    Overview

    + CUPS is more than just a print spooling system. It is a complete + printer management system that complies with the new + Internet Printing Protocol (IPP). IPP is an industry + and Internet Engineering Task Force (IETF) + standard for network printing. Many of its functions can be managed + remotely (or locally) via a Web browser (giving you a + platform-independent access to the CUPS print server). Additionally, it + has the traditional command line and several more modern GUI interfaces + (GUI interfaces developed by third parties, like KDE's + overwhelming KDEPrint).

    - CUPS allows creation of "raw" printers (ie: NO print file - format translation) as well as "smart" printers (i.e. CUPS does - file format conversion as required for the printer). In many ways - this gives CUPS similar capabilities to the MS Windows print - monitoring system. Of course, if you are a CUPS advocate, you would - argue that CUPS is better! In any case, let us now move on to - explore how one may configure CUPS for interfacing with MS Windows - print clients via Samba. -

    Basic Configuration of CUPS support

    - Printing with CUPS in the most basic smb.conf setup in Samba 3.0 (as was true for 2.2.x) only needs two - settings: printing = cups and - printcap = cups. CUPS does not need a printcap file. - However, the cupsd.conf configuration file knows of two related directives that control - how such a file will be automatically created and maintained by CUPS for the convenience of third party - applications (example: Printcap /etc/printcap and PrintcapFormat BSD). - Legacy programs often require the existence of a printcap file containing printer names or they will refuse to - print. Make sure CUPS is set to generate and maintain a printcap file! For details see - man cupsd.conf and other CUPS-related documentation, like the wealth of documents on your CUPS server - itself: http://localhost:631/documentation.html. -

    Linking of smbd with libcups.so

    - Samba has a very special relationship to CUPS. Samba can be compiled with CUPS library support. - Most recent installations have this support enabled. Per default CUPS linking is compiled - into smbd and other Samba binaries. Of course, you can use CUPS even - if Samba is not linked against libcups.so -- but - there are some differences in required or supported configuration - then. + CUPS allows creation of “raw” printers (i.e., no print file + format translation) as well as “smart” printers (i.e., CUPS does + file format conversion as required for the printer). In many ways + this gives CUPS similar capabilities to the MS Windows print + monitoring system. Of course, if you are a CUPS advocate, you would + argue that CUPS is better! In any case, let us now move on to + explore how one may configure CUPS for interfacing with MS Windows + print clients via Samba. +

    Basic CUPS Support Configuration

    + Printing with CUPS in the most basic smb.conf setup in Samba-3.0 (as was true for 2.2.x) only needs two + settings: printing = cups and + printcap = cups. CUPS does not need a printcap file. + However, the cupsd.conf configuration file knows of two related directives that control + how such a file will be automatically created and maintained by CUPS for the convenience of third-party + applications (example: Printcap /etc/printcap and PrintcapFormat BSD). + Legacy programs often require the existence of a printcap file containing printer names or they will refuse to + print. Make sure CUPS is set to generate and maintain a printcap file. For details, see + man cupsd.conf and other CUPS-related documentation, like the wealth of documents on your CUPS server + itself: http://localhost:631/documentation.html. +

    Linking smbd with libcups.so

    + Samba has a special relationship to CUPS. Samba can be compiled with CUPS library support. + Most recent installations have this support enabled. Per default, CUPS linking is compiled + into smbd and other Samba binaries. Of course, you can use CUPS even + if Samba is not linked against libcups.so but + there are some differences in required or supported configuration.

    - When Samba is compiled against libcups, printcap = cups - uses the CUPS API to list printers, submit jobs, query queues, etc. Otherwise it maps to the System V - commands with an additional -oraw option for printing. On a Linux - system, you can use the ldd utility to find out details (ldd may not be present on - other OS platforms, or its function may be embodied by a different command): + When Samba is compiled against libcups, printcap = cups + uses the CUPS API to list printers, submit jobs, query queues, and so on. Otherwise it maps to the System V + commands with an additional -oraw option for printing. On a Linux + system, you can use the ldd utility to find out details (ldd may not be present on + other OS platforms, or its function may be embodied by a different command):

     root# ldd `which smbd`
     libssl.so.0.9.6 => /usr/lib/libssl.so.0.9.6 (0x4002d000)
    @@ -96,726 +69,785 @@ libcrypto.so.0.9.6 => /usr/lib/libcrypto.so.0.9.6 (0x4005a000)
     libcups.so.2 => /usr/lib/libcups.so.2 (0x40123000)
     [....]
     

    - The line libcups.so.2 => /usr/lib/libcups.so.2 (0x40123000) shows - there is CUPS support compiled into this version of Samba. If this is the case, and printing = cups - is set, then any otherwise manually set print command in smb.conf is ignored. - This is an important point to remember! + The line libcups.so.2 => /usr/lib/libcups.so.2 (0x40123000) shows + there is CUPS support compiled into this version of Samba. If this is the case, and printing = cups + is set, then any otherwise manually set print command in smb.conf is ignored. + This is an important point to remember!

    Tip

    Should it be necessary, for any reason, to set your own print commands, you can do this by setting - printing = sysv. However, you will loose all the benefits + printing = sysv. However, you will loose all the benefits of tight CUPS/Samba integration. When you do this you must manually configure the printing system commands - (most important: print command; other commands are - lppause command, - lpresume command, - lpq command, - lprm command, - queuepause command and - queue resume command).

    Simple smb.conf Settings for CUPS

    - To summarize, here is the simplest printing-related setup for smb.conf to enable basic CUPS support: -

    Example 19.1. Simplest printing-related smb.conf

    [global]
    load printers = yes
    printing = cups
    printcap name = cups
    [printers]
    comment = All Printers
    path = /var/spool/samba
    browseable = no
    public = yes
    guest ok = yes
    writable = no
    printable = yes
    printer admin = root, @ntadmins

    - This is all you need for basic printing setup for CUPS. It will print - all Graphic, Text, PDF and PostScript file submitted from Windows - clients. However, most of your Windows users would not know how to - send these kind of files to print without opening a GUI - application. Windows clients tend to have local printer drivers - installed. And the GUI application's print buttons start a printer - driver. Your users also very rarely send files from the command - line. Unlike UNIX clients, they hardly submit graphic, text or PDF - formatted files directly to the spooler. They nearly exclusively print - from GUI applications, with a "printer driver" hooked in between the - applications native format and the print data stream. If the backend - printer is not a PostScript device, the print data stream is "binary", - sensible only for the target printer. Read on to learn which problem - this may cause and how to avoid it. -

    More complex smb.conf Settings for -CUPS

    -Here is a slightly more complex printing-related setup -for smb.conf. It enables general CUPS printing -support for all printers, but defines one printer share which is set -up differently. -

    Example 19.2. Overriding global CUPS settings for one printer

    [global]
    printing = cups
    printcap name = cups
    load printers = yes
    [printers]
    comment = All Printers
    path = /var/spool/samba
    public = yes
    guest ok = yes
    writable = no
    printable = yes
    printer admin = root, @ntadmins
    [special_printer]
    comment = A special printer with his own settings
    path = /var/spool/samba-special
    printing = sysv
    printcap = lpstat
    print command = echo "NEW: `date`: printfile %f" >> /tmp/smbprn.log ; \
    echo " `date`: p-%p s-%s f-%f" >> /tmp/smbprn.log ; \
    echo " `date`: j-%j J-%J z-%z c-%c" >> /tmp/smbprn.log : rm %f
    public = no
    guest ok = no
    writeable = no
    printable = yes
    printer admin = kurt
    hosts deny = 0.0.0.0
    hosts allow = turbo_xp, 10.160.50.23, 10.160.51.60

    -This special share is only there for testing purposes. It does not write the print job to a file. It just logs the job parameters -known to Samba into the /tmp/smbprn.log file and deletes the jobfile. Moreover, the -printer admin of this share is "kurt" (not the "@ntadmins" group); -guest access is not allowed; the share isn not published to the Network Neighbourhood (so you need to know it is there), and it only -allows access from only three hosts. To prevent CUPS kicking in and taking over the print jobs for that share, we need to set -printing = sysv and -printcap = lpstat. -

    Advanced Configuration

    -Before we delve into all the configuration options, let us clarify a few -points. Network printing needs to be organized and setup -correctly. Often this is not done correctly. Legacy systems -or small business LAN environments often lack design and good housekeeping. -

    Central spooling vs. "Peer-to-Peer" printing

    -Many small office or home networks, as well as badly organized larger -environments, allow each client a direct access to available network -printers. This is generally a bad idea. It often blocks one client's -access to the printer when another client's job is printing. It also -might freeze the first client's application while it is waiting to get -rid of the job. Also, there are frequent complaints about various jobs -being printed with their pages mixed with each other. A better concept -is the usage of a "print server": it routes all jobs through one -central system, which responds immediately, takes jobs from multiple -concurrent clients at the same time and in turn transfers them to the -printer(s) in the correct order. -

    CUPS/Samba as a "spooling-only" Print Server; "raw" printing -with Vendor Drivers on Windows Clients

    -Most traditionally configured UNIX print servers acting on behalf of -Samba's Windows clients represented a really simple setup. Their only -task was to manage the "raw" spooling of all jobs handed to them by -Samba. This approach meant that the Windows clients were expected to -prepare the print job file that it s ready to be sent to the printing -device. Here a native (vendor-supplied) Windows printer -driver for the target device needed to be installed on each and every -client. -

    -It is possible to configure CUPS, Samba and your Windows clients in the -same, traditional and simple way. When CUPS printers are configured -for RAW print-through mode operation it is the responsibility of the -Samba client to fully render the print job (file). The file must be -sent in a format that is suitable for direct delivery to the -printer. Clients need to run the vendor-provided drivers to do -this. In this case CUPS will NOT do any print file format conversion -work. -

    Driver Installation Methods on Windows Clients

    -The printer drivers on the Windows clients may be installed -in two functionally different ways: -

    • manually install the drivers locally on each client, -one by one; this yields the old LanMan style -printing; it uses a \\sambaserver\printershare -type of connection.

    • - - deposit and prepare the drivers (for later download) on -the print server (Samba); this enables the clients to use -"Point and Print" to get drivers semi-automatically installed the -first time they access the printer; with this method NT/2K/XP -clients use the SPOOLSS/MS-RPC -type printing calls.

    -The second method is recommended for use over the first. -

    Explicitly enable "raw" printing for -application/octet-stream!

    -If you use the first option (drivers are installed on the client -side), there is one setting to take care of: CUPS needs to be told -that it should allow "raw" printing of deliberate (binary) file -formats. The CUPS files that need to be correctly set for RAW mode -printers to work are: -

    • /etc/cups/mime.types -

    • /etc/cups/mime.convs

    -Both contain entries (at the end of the respective files) which must -be uncommented to allow RAW mode operation. -In/etc/cups/mime.types make sure this line is -present: -

    - application/octet-stream
    -

    -In /etc/cups/mime.convs, -have this line: -

    - application/octet-stream   application/vnd.cups-raw   0   - 
    -

    -If these two files are not set up correctly for raw Windows client -printing, you may encounter the dreaded Unable to -convert file 0 in your CUPS error_log file. -

    Note

    editing the mime.convs and the -mime.types file does not -enforce "raw" printing, it only -allows it. -

    Background.  -CUPS being a more security-aware printing system than traditional ones -does not by default allow a user to send deliberate (possibly binary) -data to printing devices. This could be easily abused to launch a -"Denial of Service" attack on your printer(s), causing at the least -the loss of a lot of paper and ink. "Unknown" data are tagged by CUPS -as MIME type: application/octet-stream and not -allowed to go to the printer. By default, you can only send other -(known) MIME types "raw". Sending data "raw" means that CUPS does not -try to convert them and passes them to the printer untouched (see next -chapter for even more background explanations). -

    -This is all you need to know to get the CUPS/Samba combo printing -"raw" files prepared by Windows clients, which have vendor drivers -locally installed. If you are not interested in background information about -more advanced CUPS/Samba printing, simply skip the remaining sections -of this chapter. -

    Three familiar Methods for driver upload plus a new one

    -If you want to use the MS-RPC type printing, you must upload the -drivers onto the Samba server first ([print$] -share). For a discussion on how to deposit printer drivers on the -Samba host (so that the Windows clients can download and use them via -"Point'n'Print") please also refer to the previous chapter of this -HOWTO Collection. There you will find a description or reference to -three methods of preparing the client drivers on the Samba server: -

    • the GUI, "Add Printer Wizard" -upload-from-a-Windows-client -method;

    • the commandline, "smbclient/rpcclient" -upload-from-a-UNIX-workstation -method;

    • - - the Imprints Toolset -method.

    -These 3 methods apply to CUPS all the same. A new and more -convenient way to load the Windows drivers into Samba is provided -if you use CUPS: -

    • the cupsaddsmb -utility.

    -cupsaddsmb is discussed in much detail further below. But we will -first explore the CUPS filtering system and compare the Windows and -UNIX printing architectures. -

    Using CUPS/Samba in an advanced Way -- intelligent printing -with PostScript Driver Download

    -Are you still following this? Good. Let's go into more detail then. We now know -how to set up a "dump" printserver, that is, a server which is spooling -printjobs "raw", leaving the print data untouched. -

    -Possibly you need to setup CUPS in a more smart way. The reasons could -be manifold: -

    • Maybe your boss wants to get monthly statistics: Which -printer did how many pages? What was the average data size of a job? -What was the average print run per day? What are the typical hourly -peaks in printing? Which departments prints how -much?

    • Maybe you are asked to setup a print quota system: -users should not be able to print more jobs, once they have surpassed -a given limit per period?

    • Maybe your previous network printing setup is a mess -and shall be re-organized from a clean beginning?

    • Maybe you have experiencing too many "Blue Screens", -originating from poorly debugged printer drivers running in NT "kernel -mode"?

    -These goals cannot be achieved by a raw print server. To build a -server meeting these requirements, you'll first need to learn about -how CUPS works and how you can enable its features. -

    -What follows is the comparison of some fundamental concepts for -Windows and UNIX printing; then is the time for a description of the -CUPS filtering system, how it works and how you can tweak it. -

    GDI on Windows -- PostScript on UNIX

    -Network printing is one of the most complicated and error-prone -day-to-day tasks any user or an administrator may encounter. This is -true for all OS platforms. And there are reasons for this. -

    -You can't expect for most file formats to just throw them towards -printers and they get printed. There needs to be a file format -conversion in between. The problem is: there is no common standard for -print file formats across all manufacturers and printer types. While -PostScript (trademark held by Adobe), and, to an -extent, PCL (trademark held by HP), have developed -into semi-official "standards", by being the most widely used PDLs -(Page Description Languages), there are still -many manufacturers who "roll their own" (their reasons may be -unacceptable license fees for using printer-embedded PostScript -interpreters, etc.). -

    Windows Drivers, GDI and EMF

    -In Windows OS, the format conversion job is done by the printer -drivers. On MS Windows OS platforms all application programmers have -at their disposal a built-in API, the GDI (Graphical Device -Interface), as part and parcel of the OS itself, to base -themselves on. This GDI core is used as one common unified ground, for -all Windows programs, to draw pictures, fonts and documents -on screen as well as on -paper (=print). Therefore printer driver developers can -standardize on a well-defined GDI output for their own driver -input. Achieving WYSIWYG ("What You See Is What You Get") is -relatively easy, because the on-screen graphic primitives, as well as -the on-paper drawn objects, come from one common source. This source, -the GDI, produces often a file format called EMF (Enhanced -MetaFile). The EMF is processed by the printer driver and -converted to the printer-specific file format. -

    Note

    - -To the GDI foundation in MS Windows, Apple has chosen to -put paper and screen output on a common foundation for their -(BSD-UNIX-based, did you know??) Mac OS X and Darwin Operating -Systems. Their Core Graphic Engine uses a -PDF derivative for all display work. -

    + (most important: + print command; other commands are + lppause command, + lpresume command, + lpq command, + lprm command, + queuepause command and + queue resume command).

    Simple smb.conf Settings for CUPS

    + To summarize, shows simplest printing-related setup for smb.conf to enable basic CUPS support: +

    Example 19.1. Simplest printing-related smb.conf

    [global]
    load printers = yes
    printing = cups
    printcap name = cups
    [printers]
    comment = All Printers
    path = /var/spool/samba
    browseable = no
    public = yes
    guest ok = yes
    writable = no
    printable = yes
    printer admin = root, @ntadmins

    + This is all you need for basic printing setup for CUPS. It will print + all graphic, text, PDF, and PostScript files submitted from Windows + clients. However, most of your Windows users would not know how to + send these kinds of files to print without opening a GUI + application. Windows clients tend to have local printer drivers + installed, and the GUI application's print buttons start a printer + driver. Your users also rarely send files from the command + line. Unlike UNIX clients, they hardly submit graphic, text or PDF + formatted files directly to the spooler. They nearly exclusively print + from GUI applications with a “printer driver” hooked in between the + application's native format and the print-data-stream. If the backend + printer is not a PostScript device, the print data stream is “binary,” + sensible only for the target printer. Read on to learn which problem + this may cause and how to avoid it. +

    More Complex CUPS smb.conf Settings

    + is a slightly more complex printing-related setup + for smb.conf. It enables general CUPS printing + support for all printers, but defines one printer share, which is set + up differently. +

    Example 19.2. Overriding global CUPS settings for one printer

    [global]
    printing = cups
    printcap name = cups
    load printers = yes
    [printers]
    comment = All Printers
    path = /var/spool/samba
    public = yes
    guest ok = yes
    writable = no
    printable = yes
    printer admin = root, @ntadmins
    [special_printer]
    comment = A special printer with his own settings
    path = /var/spool/samba-special
    printing = sysv
    printcap = lpstat
    print command = echo "NEW: `date`: printfile %f" >> /tmp/smbprn.log ; \
    echo " `date`: p-%p s-%s f-%f" >> /tmp/smbprn.log ; \
    echo " `date`: j-%j J-%J z-%z c-%c" >> /tmp/smbprn.log : rm %f
    public = no
    guest ok = no
    writeable = no
    printable = yes
    printer admin = kurt
    hosts deny = 0.0.0.0
    hosts allow = turbo_xp, 10.160.50.23, 10.160.51.60

    + This special share is only there for testing purposes. It does not write the print job to a file. It just logs the job parameters + known to Samba into the /tmp/smbprn.log file and deletes the jobfile. Moreover, the + printer admin of this share is “kurt” (not the “@ntadmins” group), + guest access is not allowed, the share isn't published to the Network Neighborhood (so you need to know it is there), and it only + allows access from only three hosts. To prevent CUPS kicking in and taking over the print jobs for that share, we need to set + printing = sysv and + printcap = lpstat. +

    Advanced Configuration

    + Before we delve into all the configuration options, let us clarify a few + points. Network printing needs to be organized and setup + correctly. This frequently doesn't happen. Legacy systems + or small business LAN environments often lack design and good housekeeping. +

    Central Spooling vs. “Peer-to-Peer” Printing

    + + + Many small office or home networks, as well as badly organized larger + environments, allow each client a direct access to available network + printers. This is generally a bad idea. It often blocks one client's + access to the printer when another client's job is printing. It might + freeze the first client's application while it is waiting to get + rid of the job. Also, there are frequent complaints about various jobs + being printed with their pages mixed with each other. A better concept + is the usage of a print server: it routes all jobs through one + central system, which responds immediately, takes jobs from multiple + concurrent clients at the same time, and in turn transfers them to the + printer(s) in the correct order. +

    Raw Print Serving Vendor Drivers on Windows Clients

    + + + Most traditionally configured UNIX print servers acting on behalf of + Samba's Windows clients represented a really simple setup. Their only + task was to manage the “raw” spooling of all jobs handed to them by + Samba. This approach meant that the Windows clients were expected to + prepare the print job file that its ready to be sent to the printing + device. Here is a native (vendor-supplied) Windows printer + driver for the target device needed to be installed on each and every + client. +

    + It is possible to configure CUPS, Samba and your Windows clients in the + same traditional and simple way. When CUPS printers are configured + for RAW print-through mode operation, it is the responsibility of the + Samba client to fully render the print job (file). The file must be + sent in a format that is suitable for direct delivery to the + printer. Clients need to run the vendor-provided drivers to do + this. In this case, CUPS will not do any print file format conversion + work. +

    Installation of Windows Client Drivers

    + The printer drivers on the Windows clients may be installed + in two functionally different ways: +

    • Manually install the drivers locally on each client, + one by one; this yields the old LanMan style + printing and uses a \\sambaserver\printershare + type of connection.

    • + + Deposit and prepare the drivers (for later download) on + the print server (Samba); this enables the clients to use + “Point'n'Print” to get drivers semi-automatically installed the + first time they access the printer; with this method NT/200x/XP + clients use the SPOOLSS/MS-RPC + type printing calls.

    + The second method is recommended for use over the first. +

    Explicitly Enable “raw” Printing for application/octet-stream

    + + + + If you use the first option (drivers are installed on the client + side), there is one setting to take care of: CUPS needs to be told + that it should allow “raw” printing of deliberate (binary) file + formats. The CUPS files that need to be correctly set for RAW mode + printers to work are: +

    • /etc/cups/mime.types

    • /etc/cups/mime.convs

    + Both contain entries (at the end of the respective files) which must + be uncommented to allow RAW mode operation. + In /etc/cups/mime.types, make sure this line is + present: -

    Figure 19.1. Windows Printing to a local Printer

    Windows Printing to a local Printer

    -

    UNIX Printfile Conversion and GUI Basics

    -In UNIX and Linux, there is no comparable layer built into the OS -kernel(s) or the X (screen display) server. Every application is -responsible for itself to create its print output. Fortunately, most -use PostScript. That gives at least some common ground. Unfortunately, -there are many different levels of quality for this PostScript. And -worse: there is a huge difference (and no common root) in the way how -the same document is displayed on screen and how it is presented on -paper. WYSIWYG is more difficult to achieve. This goes back to the -time decades ago, when the predecessors of X.org, -designing the UNIX foundations and protocols for Graphical User -Interfaces refused to take over responsibility for "paper output" -also, as some had demanded at the time, and restricted itself to -"on-screen only". (For some years now, the "Xprint" project has been -under development, attempting to build printing support into the X -framework, including a PostScript and a PCL driver, but it is not yet -ready for prime time.) You can see this unfavorable inheritance up to -the present day by looking into the various "font" directories on your -system; there are separate ones for fonts used for X display and fonts -to be used on paper. -

    Background.  -The PostScript programming language is an "invention" by Adobe Inc., -but its specifications have been published to the full. Its strength -lies in its powerful abilities to describe graphical objects (fonts, -shapes, patterns, lines, curves, dots...), their attributes (color, -linewidth...) and the way to manipulate (scale, distort, rotate, -shift...) them. Because of its open specification, anybody with the -skill can start writing his own implementation of a PostScript -interpreter and use it to display PostScript files on screen or on -paper. Most graphical output devices are based on the concept of -"raster images" or "pixels" (one notable exception are pen -plotters). Of course, you can look at a PostScript file in its textual -form and you will be reading its PostScript code, the language -instructions which need to be interpreted by a rasterizer. Rasterizers -produce pixel images, which may be displayed on screen by a viewer -program or on paper by a printer. -

    PostScript and Ghostscript

    -So, UNIX is lacking a common ground for printing on paper and -displaying on screen. Despite this unfavorable legacy for UNIX, basic -printing is fairly easy: if you have PostScript printers at your -disposal! The reason is: these devices have a built-in PostScript -language "interpreter", also called a Raster Image -Processor (RIP), (which makes them more expensive than -other types of printers); throw PostScript towards them, and they will -spit out your printed pages. Their RIP is doing all the hard work of -converting the PostScript drawing commands into a bitmap picture as -you see it on paper, in a resolution as done by your printer. This is -no different to PostScript printing of a file from a Windows origin. -

    Note

    - -Traditional UNIX programs and printing systems -- while -using PostScript -- are largely not PPD-aware. PPDs are "PostScript -Printer Description" files. They enable you to specify and control all -options a printer supports: duplexing, stapling, punching... Therefore -UNIX users for a long time couldn't choose many of the supported -device and job options, unlike Windows or Apple users. But now there -is CUPS.... -

    -

    Figure 19.2. Printing to a Postscript Printer

    Printing to a Postscript Printer

    -

    -However, there are other types of printers out there. These don't know -how to print PostScript. They use their own Page Description -Language (PDL, often proprietary). To print to them is much -more demanding. Since your UNIX applications mostly produce -PostScript, and since these devices don't understand PostScript, you -need to convert the printfiles to a format suitable for your printer -on the host, before you can send it away. -

    Ghostscript -- the Software RIP for non-PostScript Printers

    -Here is where Ghostscript kicks in. Ghostscript is -the traditional (and quite powerful) PostScript interpreter used on -UNIX platforms. It is a RIP in software, capable to do a -lot of file format conversions, for a very broad -spectrum of hardware devices as well as software file formats. -Ghostscript technology and drivers is what enables PostScript printing -to non-PostScript hardware. -

    -

    Figure 19.3. Ghostscript as a RIP for non-postscript printers

    Ghostscript as a RIP for non-postscript printers

    -

    Tip

    -Use the "gs -h" command to check for all built-in "devices" of your -Ghostscript version. If you specify e.g. a parameter of --sDEVICE=png256 on your Ghostscript command -line, you are asking Ghostscript to convert the input into a PNG -file. Naming a "device" on the commandline is the most important -single parameter to tell Ghostscript how exactly it should render the -input. New Ghostscript versions are released at fairly regular -intervals, now by artofcode LLC. They are initially put under the -"AFPL" license, but re-released under the GNU GPL as soon as the next -AFPL version appears. GNU Ghostscript is probably the version -installed on most Samba systems. But it has got some -deficiencies. Therefore ESP Ghostscript was developed as an -enhancement over GNU Ghostscript, with lots of bug-fixes, additional -devices and improvements. It is jointly maintained by developers from -CUPS, Gimp-Print, MandrakeSoft, SuSE, RedHat and Debian. It includes -the "cups" device (essential to print to non-PS printers from CUPS). -

    PostScript Printer Description (PPD) Specification

    -While PostScript in essence is a Page Description -Language (PDL) to represent the page layout in a -device independent way, real world print jobs are -always ending up to be output on a hardware with device-specific -features. To take care of all the differences in hardware, and to -allow for innovations, Adobe has specified a syntax and file format -for PostScript Printer Description (PPD) -files. Every PostScript printer ships with one of these files. -

    -PPDs contain all information about general and special features of the -given printer model: Which different resolutions can it handle? Does -it have a Duplexing Unit? How many paper trays are there? What media -types and sizes does it take? For each item it also names the special -command string to be sent to the printer (mostly inside the PostScript -file) in order to enable it. -

    -Information from these PPDs is meant to be taken into account by the -printer drivers. Therefore, installed as part of the Windows -PostScript driver for a given printer is the printer's PPD. Where it -makes sense, the PPD features are presented in the drivers' UI dialogs -to display to the user as choice of print options. In the end, the -user selections are somehow written (in the form of special -PostScript, PJL, JCL or vendor-dependent commands) into the PostScript -file created by the driver. -

    Warning

    - -A PostScript file that was created to contain device-specific commands -for achieving a certain print job output (e.g. duplexed, stapled and -punched) on a specific target machine, may not print as expected, or -may not be printable at all on other models; it also may not be fit -for further processing by software (e.g. by a PDF distilling program). -

    CUPS can use all Windows-formatted Vendor PPDs

    -CUPS can handle all spec-compliant PPDs as supplied by the -manufacturers for their PostScript models. Even if a -UNIX/Linux-illiterate vendor might not have mentioned our favorite -OS in his manuals and brochures -- you can safely trust this: -if you get hold of the Windows NT version of the PPD, you -can use it unchanged in CUPS and thus access the full -power of your printer just like a Windows NT user could! -

    Tip

    -To check the spec compliance of any PPD online, go to http://www.cups.org/testppd.php -and upload your PPD. You will see the results displayed -immediately. CUPS in all versions after 1.1.19 has a much more strict -internal PPD parsing and checking code enabled; in case of printing -trouble this online resource should be one of your first pitstops. -

    Warning

    - - -For real PostScript printers don't use the -Foomatic or cupsomatic -PPDs from Linuxprinting.org. With these devices the original -vendor-provided PPDs are always the first choice! -

    Tip

    -If you are looking for an original vendor-provided PPD of a specific -device, and you know that an NT4 box (or any other Windows box) on -your LAN has the PostScript driver installed, just use -smbclient //NT4-box/print\$ -U username to -access the Windows directory where all printer driver files are -stored. First look in the W32X86/2 subdir for -the PPD you are seeking. -

    CUPS also uses PPDs for non-PostScript Printers

    -CUPS also uses specially crafted PPDs to handle non-PostScript -printers. These PPDs are usually not available from the vendors (and -no, you can't just take the PPD of a Postscript printer with the same -model name and hope it works for the non-PostScript version too). To -understand how these PPDs work for non-PS printers we first need to -dive deeply into the CUPS filtering and file format conversion -architecture. Stay tuned. -

    The CUPS Filtering Architecture

    +

    +	 application/octet-stream
    +	

    + + + + + In /etc/cups/mime.convs, + have this line: + + + +

    +		application/octet-stream   application/vnd.cups-raw   0   - 
    +	

    + + If these two files are not set up correctly for raw Windows client + printing, you may encounter the dreaded Unable to + convert file 0 in your CUPS error_log file. +

    Note

    Editing the mime.convs and the + mime.types file does not + enforceraw” printing, it only + allows it. +

    Background.  + + CUPS being a more security-aware printing system than traditional ones + does not by default allow a user to send deliberate (possibly binary) + data to printing devices. This could be easily abused to launch a + “Denial of Service” attack on your printer(s), causing at least + the loss of a lot of paper and ink. “Unknown” data are tagged by CUPS + as MIME type: application/octet-stream and not + allowed to go to the printer. By default, you can only send other + (known) MIME types “raw”. Sending data “raw” means that CUPS does not + try to convert them and passes them to the printer untouched (see the next + chapter for even more background explanations). +

    + This is all you need to know to get the CUPS/Samba combo printing + “raw” files prepared by Windows clients, which have vendor drivers + locally installed. If you are not interested in background information about + more advanced CUPS/Samba printing, simply skip the remaining sections + of this chapter. +

    Driver Upload Methods

    + This section describes three familiar methods, plus one new one, by which + printer drivers may be uploaded. +

    + + If you want to use the MS-RPC type printing, you must upload the + drivers onto the Samba server first ([print$] + share). For a discussion on how to deposit printer drivers on the + Samba host (so the Windows clients can download and use them via + “Point'n'Print”), please refer to the previous chapter of this + HOWTO Collection. There you will find a description or reference to + three methods of preparing the client drivers on the Samba server: +

    • + + The GUI, “Add Printer Wizard” + upload-from-a-Windows-client + method.

    • The command line, “smbclient/rpcclient” + upload-from-a-UNIX-workstation method.

    • + + The Imprints Toolset + method.

    + These three methods apply to CUPS all the same. A new and more + convenient way to load the Windows drivers into Samba is provided + if you use CUPS: +

    • + + the cupsaddsmb + utility.

    + cupsaddsmb is discussed in much detail further below. But we first + explore the CUPS filtering system and compare the Windows and UNIX printing architectures. +

    Advanced Intelligent Printing with PostScript Driver Download

    + + We now know + how to set up a “dump” printserver, that is, a server which is spooling + printjobs “raw”, leaving the print data untouched. +

    + Possibly you need to setup CUPS in a smarter way. The reasons could + be manifold: +

    • Maybe your boss wants to get monthly statistics: Which + printer did how many pages? What was the average data size of a job? + What was the average print run per day? What are the typical hourly + peaks in printing? Which department prints how much?

    • Maybe you are asked to setup a print quota system: + Users should not be able to print more jobs, once they have surpassed + a given limit per period.

    • Maybe your previous network printing setup is a mess + and must be re-organized from a clean beginning.

    • Maybe you have experiencing too many “blue screens” + originating from poorly debugged printer drivers running in NT “kernel mode”?

    + These goals cannot be achieved by a raw print server. To build a + server meeting these requirements, you'll first need to learn about + how CUPS works and how you can enable its features. +

    + What follows is the comparison of some fundamental concepts for + Windows and UNIX printing; then follows a description of the + CUPS filtering system, how it works and how you can tweak it. +

    GDI on Windows -- PostScript on UNIX

    + + + Network printing is one of the most complicated and error-prone + day-to-day tasks any user or administrator may encounter. This is + true for all OS platforms. And there are reasons for this. +

    + + + You can't expect most file formats to just throw them toward + printers and they get printed. There needs to be a file format + conversion in between. The problem is that there is no common standard for + print file formats across all manufacturers and printer types. While + PostScript (trademark held by Adobe) and, to an + extent, PCL (trademark held by HP) have developed + into semi-official “standards” by being the most widely used PDLs + Page Description Languages (PDLs), there are still + many manufacturers who “roll their own” (their reasons may be + unacceptable license fees for using printer-embedded PostScript + interpreters, and so on). +

    Windows Drivers, GDI and EMF

    + + + + In Windows OS, the format conversion job is done by the printer + drivers. On MS Windows OS platforms all application programmers have + at their disposal a built-in API, the Graphical Device + Interface (GDI), as part and parcel of the OS itself to base + themselves on. This GDI core is used as one common unified ground for + all Windows programs to draw pictures, fonts and documents + on screen as well as on + paper (print). Therefore, printer driver developers can + standardize on a well-defined GDI output for their own driver + input. Achieving WYSIWYG (“What You See Is What You Get”) is + relatively easy, because the on-screen graphic primitives, as well as + the on-paper drawn objects, come from one common source. This source, + the GDI, often produces a file format called Enhanced + MetaFile (EMF). The EMF is processed by the printer driver and + converted to the printer-specific file format. +

    Note

    + + To the GDI foundation in MS Windows, Apple has chosen to + put paper and screen output on a common foundation for their + (BSD-UNIX-based, did you know?) Mac OS X and Darwin Operating + + + + + Systems. Their Core Graphic Engine uses a + PDF derivative for all display work. +

    + +

    Figure 19.1. Windows printing to a local printer.

    Windows printing to a local printer.

    +

    UNIX Printfile Conversion and GUI Basics

    + + + + + In UNIX and Linux, there is no comparable layer built into the OS + kernel(s) or the X (screen display) server. Every application is + responsible for itself to create its print output. Fortunately, most + use PostScript and that at least gives some common ground. Unfortunately, + there are many different levels of quality for this PostScript. And + worse, there is a huge difference (and no common root) in the way + the same document is displayed on screen and how it is presented on + paper. WYSIWYG is more difficult to achieve. This goes back to the + time, decades ago, when the predecessors of X.org, + designing the UNIX foundations and protocols for Graphical User + Interfaces, refused to take responsibility for “paper output” + also, as some had demanded at the time, and restricted itself to + “on-screen only.” (For some years now, the “Xprint” project has been + under development, attempting to build printing support into the X + framework, including a PostScript and a PCL driver, but it is not yet + ready for prime time.) You can see this unfavorable inheritance up to + the present day by looking into the various “font” directories on your + system; there are separate ones for fonts used for X display and fonts + to be used on paper. +

    Background.  + + The PostScript programming language is an “invention” by Adobe Inc., + but its specifications have been published to the full. Its strength + lies in its powerful abilities to describe graphical objects (fonts, + shapes, patterns, lines, curves, and dots), their attributes (color, + linewidth) and the way to manipulate (scale, distort, rotate, + shift) them. Because of its open specification, anybody with the + skill can start writing his own implementation of a PostScript + interpreter and use it to display PostScript files on screen or on + paper. Most graphical output devices are based on the concept of + “raster images” or “pixels” (one notable exception is pen + plotters). Of course, you can look at a PostScript file in its textual + form and you will be reading its PostScript code, the language + instructions which need to be interpreted by a rasterizer. Rasterizers + produce pixel images, which may be displayed on screen by a viewer + program or on paper by a printer. +

    PostScript and Ghostscript

    + + + + So, UNIX is lacking a common ground for printing on paper and + displaying on screen. Despite this unfavorable legacy for UNIX, basic + printing is fairly easy if you have PostScript printers at your + disposal. The reason is these devices have a built-in PostScript + language “interpreter,” also called a Raster Image + Processor (RIP) (which makes them more expensive than + other types of printers); throw PostScript toward them, and they will + spit out your printed pages. Their RIP is doing all the hard work of + converting the PostScript drawing commands into a bitmap picture as + you see it on paper, in a resolution as done by your printer. This is + no different to PostScript printing a file from a Windows origin. +

    Note

    + + Traditional UNIX programs and printing systems while + using PostScript are largely not PPD-aware. PPDs are “PostScript + Printer Description” files. They enable you to specify and control all + options a printer supports: duplexing, stapling and punching. Therefore, + UNIX users for a long time couldn't choose many of the supported + device and job options, unlike Windows or Apple users. But now there + is CUPS. +

    +

    Figure 19.2. Printing to a PostScript printer.

    Printing to a PostScript printer.

    +

    + + However, there are other types of printers out there. These do not know + how to print PostScript. They use their own Page Description + Language (PDL, often proprietary). To print to them is much + more demanding. Since your UNIX applications mostly produce + PostScript, and since these devices do not understand PostScript, you + need to convert the printfiles to a format suitable for your printer + on the host before you can send it away. +

    Ghostscript the Software RIP for Non-PostScript Printers

    + + Here is where Ghostscript kicks in. Ghostscript is + the traditional (and quite powerful) PostScript interpreter used on + UNIX platforms. It is a RIP in software, capable of doing a + lot of file format conversions for a very broad + spectrum of hardware devices as well as software file formats. + Ghostscript technology and drivers are what enable PostScript printing + to non-PostScript hardware. +

    +

    Figure 19.3. Ghostscript as a RIP for non-postscript printers.

    Ghostscript as a RIP for non-postscript printers.

    +

    Tip

    + Use the “gs -h” command to check for all built-in “devices” + of your Ghostscript version. If you specify a parameter of + -sDEVICE=png256 on your Ghostscript command + line, you are asking Ghostscript to convert the input into a PNG + file. Naming a “device” on the command line is the most important + single parameter to tell Ghostscript exactly how it should render the + input. New Ghostscript versions are released at fairly regular + intervals, now by artofcode LLC. They are initially put under the + “AFPL” license, but re-released under the GNU GPL as soon as the next + AFPL version appears. GNU Ghostscript is probably the version + installed on most Samba systems. But it has some deficiencies. + + Therefore, ESP Ghostscript was developed as an + enhancement over GNU Ghostscript, with lots of bug-fixes, additional + devices and improvements. It is jointly maintained by developers from + CUPS, Gimp-Print, MandrakeSoft, SuSE, RedHat, and Debian. It includes + the “cups” device (essential to print to non-PS printers from CUPS). +

    PostScript Printer Description (PPD) Specification

    + + While PostScript in essence is a Page Description + Language (PDL) to represent the page layout in a + device-independent way, real-world print jobs are + always ending up being output on hardware with device-specific + features. To take care of all the differences in hardware and to + allow for innovations, Adobe has specified a syntax and file format + for PostScript Printer Description (PPD) + files. Every PostScript printer ships with one of these files. +

    + PPDs contain all the information about general and special features of the + given printer model: Which different resolutions can it handle? Does + it have a Duplexing Unit? How many paper trays are there? What media + types and sizes does it take? For each item, it also names the special + command string to be sent to the printer (mostly inside the PostScript + file) in order to enable it. +

    + Information from these PPDs is meant to be taken into account by the + printer drivers. Therefore, installed as part of the Windows + PostScript driver for a given printer is the printer's PPD. Where it + makes sense, the PPD features are presented in the drivers' UI dialogs + to display to the user a choice of print options. In the end, the + user selections are somehow written (in the form of special + PostScript, PJL, JCL or vendor-dependent commands) into the PostScript + file created by the driver. +

    Warning

    + + A PostScript file that was created to contain device-specific commands + for achieving a certain print job output (e.g., duplexed, stapled and + punched) on a specific target machine, may not print as expected, or + may not be printable at all on other models; it also may not be fit + for further processing by software (e.g., by a PDF distilling program). +

    Using Windows-Formatted Vendor PPDs

    + CUPS can handle all spec-compliant PPDs as supplied by the + manufacturers for their PostScript models. Even if a + vendor might not have mentioned our favorite + OS in his manuals and brochures, you can safely trust this: + If you get the Windows NT version of the PPD, you + can use it unchanged in CUPS and thus access the full + power of your printer just like a Windows NT user could! +

    Tip

    + To check the spec compliance of any PPD online, go to http://www.cups.org/testppd.php + and upload your PPD. You will see the results displayed + immediately. CUPS in all versions after 1.1.19 has a much more strict + internal PPD parsing and checking code enabled; in case of printing + trouble, this online resource should be one of your first pitstops. +

    Warning

    + + + For real PostScript printers, do not use the + Foomatic or cupsomatic + PPDs from Linuxprinting.org. With these devices, the original + vendor-provided PPDs are always the first choice! +

    Tip

    + If you are looking for an original vendor-provided PPD of a specific + device, and you know that an NT4 box (or any other Windows box) on + your LAN has the PostScript driver installed, just use + smbclient //NT4-box/print\$ -U username to + access the Windows directory where all printer driver files are + stored. First look in the W32X86/2 subdir for + the PPD you are seeking. +

    CUPS Also Uses PPDs for Non-PostScript Printers

    + CUPS also uses specially crafted PPDs to handle non-PostScript + printers. These PPDs are usually not available from the vendors (and + no, you can't just take the PPD of a PostScript printer with the same + model name and hope it works for the non-PostScript version too). To + understand how these PPDs work for non-PS printers, we first need to + dive deeply into the CUPS filtering and file format conversion + architecture. Stay tuned. +

    The CUPS Filtering Architecture

    The core of the CUPS filtering system is based on -Ghostscript. In addition to Ghostscript, CUPS +Ghostscript. In addition to Ghostscript, CUPS uses some other filters of its own. You (or your OS vendor) may have plugged in even more filters. CUPS handles all data file formats under -the label of various MIME types. Every incoming +the label of various MIME types. Every incoming printfile is subjected to an initial -auto-typing. The auto-typing determines its given +auto-typing. The auto-typing determines its given MIME type. A given MIME type implies zero or more possible filtering chains relevant to the selected target printer. This section discusses how MIME types recognition and conversion rules interact. They are used by CUPS to automatically setup a working filtering chain for any given input data format.

    -If CUPS rasterizes a PostScript file natively to -a bitmap, this is done in 2 stages: -

    • the first stage uses a Ghostscript device named "cups" +If CUPS rasterizes a PostScript file natively to +a bitmap, this is done in two stages: +

      • The first stage uses a Ghostscript device named “cups” (this is since version 1.1.15) and produces a generic raster format -called "CUPS raster". -

      • the second stage uses a "raster driver" which converts -the generic CUPS raster to a device specific raster.

      -Make sure your Ghostscript version has the "cups" device compiled in -(check with gs -h | grep cups). Otherwise you +called “CUPS raster”. +

    • The second stage uses a “raster driver” that converts + the generic CUPS raster to a device-specific raster.

    +Make sure your Ghostscript version has the “cups” device compiled in +(check with gs -h | grep cups). Otherwise you may encounter the dreaded Unable to convert file -0 in your CUPS error_log file. To have "cups" as a -device in your Ghostscript, you either need to patch GNU -Ghostscript and re-compile or use ESP Ghostscript. The -superior alternative is ESP Ghostscript: it supports not just CUPS, +0 in your CUPS error_log file. To have “cups” as a +device in your Ghostscript, you either need to patch GNU +Ghostscript and re-compile, or use ESP Ghostscript. The +superior alternative is ESP Ghostscript. It supports not just CUPS, but 300 other devices too (while GNU Ghostscript supports only about 180). Because of this broad output device support, ESP Ghostscript is -the first choice for non-CUPS spoolers too. It is now recommended by +the first choice for non-CUPS spoolers, too. It is now recommended by Linuxprinting.org for all spoolers.

    - - -CUPS printers may be setup to use external -rendering paths. One of the most common ones is provided by the -Foomatic/cupsomatic concept, from Linuxprinting.org. This + + +CUPS printers may be setup to use external +rendering paths. One of the most common is provided by the +Foomatic/cupsomatic concept from Linuxprinting.org. This uses the classical Ghostscript approach, doing everything in one -step. It doesn't use the "cups" device, but one of the many +step. It does not use the “cups” device, but one of the many others. However, even for Foomatic/cupsomatic usage, best results and - + broadest printer model support is provided by ESP Ghostscript (more about cupsomatic/Foomatic, particularly the new version called now foomatic-rip, follows below). -

    MIME types and CUPS Filters

    - +

    MIME Types and CUPS Filters

    + + CUPS reads the file /etc/cups/mime.types (and all other files carrying a *.types suffix in the same directory) upon startup. These files contain the MIME -type recognition rules which are applied when CUPS runs its +type recognition rules that are applied when CUPS runs its auto-typing routines. The rule syntax is explained in the man page for mime.types and in the comments section of the mime.types file itself. A simple rule reads like this: -

    - -

    +
    +
    +

      application/pdf         pdf string(0,%PDF)
     

    -This means: if a filename has either a -.pdf suffix, or if the magic + +This means if a filename has either a +.pdf suffix or if the magic string %PDF is right at the beginning of the file itself (offset 0 from the start), then it is -a PDF file (application/pdf). +a PDF file (application/pdf). Another rule is this: -

    +
    +

      application/postscript  ai eps ps string(0,%!) string(0,<04>%!)
     

    -Its meaning: if the filename has one of the suffixes + +If the filename has one of the suffixes .ai, .eps, .ps or if the file itself starts with one of the strings %! or <04>%!, it is a generic PostScript file -(application/postscript). -

    Note

    -There is a very important difference between two similar MIME type in -CUPS: one is application/postscript, the other is -application/vnd.cups-postscript. While -application/postscript is meant to be device +(application/postscript). +

    Warning

    +Don't confuse the other mime.types files your system might be using +with the one in the /etc/cups/ directory. +

    Note

    +There is an important difference between two similar MIME types in +CUPS: one is application/postscript, the other is +application/vnd.cups-postscript. While +application/postscript is meant to be device independent (job options for the file are still outside the PS file -content, embedded in commandline or environment variables by CUPS), -application/vnd.cups-postscript may have the job -options inserted into the PostScript data itself (were +content, embedded in command line or environment variables by CUPS), +application/vnd.cups-postscript may have the job +options inserted into the PostScript data itself (where applicable). The transformation of the generic PostScript -(application/postscript) to the device-specific version -(application/vnd.cups-postscript) is the responsibility of the -CUPS pstops filter. pstops uses information +(application/postscript) to the device-specific version +(application/vnd.cups-postscript) is the responsibility of the +CUPS pstops filter. pstops uses information contained in the PPD to do the transformation. -

    Warning

    -Don't confuse the other mime.types file your system might be using -with the one in the /etc/cups/ directory.

    -CUPS can handle ASCII text, HP-GL, PDF, PostScript, DVI and a -lot of image formats (GIF. PNG, TIFF, JPEG, Photo-CD, SUN-Raster, -PNM, PBM, SGI-RGB and some more) and their associated MIME types +CUPS can handle ASCII text, HP-GL, PDF, PostScript, DVI, and +many image formats (GIF. PNG, TIFF, JPEG, Photo-CD, SUN-Raster, +PNM, PBM, SGI-RGB, and more) and their associated MIME types with its filters. -

    MIME type Conversion Rules

    +

    MIME Type Conversion Rules

    + + CUPS reads the file /etc/cups/mime.convs (and all other files named with a *.convs suffix in the same directory) upon startup. These files contain lines naming an input MIME type, an output MIME type, a format -conversion filter which can produce the output from the input type +conversion filter that can produce the output from the input type and virtual costs associated with this conversion. One example line reads like this: -

    +
    +

      application/pdf         application/postscript   33   pdftops
     

    -This means that the pdftops filter will take -application/pdf as input and produce -application/postscript as output, the virtual + +This means that the pdftops filter will take +application/pdf as input and produce +application/postscript as output; the virtual cost of this operation is 33 CUPS-$. The next filter is more expensive, costing 66 CUPS-$: -

    +
    +
    +
    +

      application/vnd.hp-HPGL application/postscript   66   hpgltops
     

    -This is the hpgltops, which processes HP-GL + +This is the hpgltops, which processes HP-GL plotter files to PostScript. -

    +
    +
    +
    +

      application/octet-stream
     

    + Here are two more examples: -

    +
    +
    +
    +

      application/x-shell     application/postscript   33    texttops
      text/plain              application/postscript   33    texttops
     

    -The last two examples name the texttops filter -to work on "text/plain" as well as on "application/x-shell". (Hint: -this differentiation is needed for the syntax highlighting feature of -"texttops"). -

    Filter Requirements

    -There are many more combinations named in mime.convs. However, you + +The last two examples name the texttops filter +to work on text/plain as well as on application/x-shell. (Hint: +This differentiation is needed for the syntax highlighting feature of +texttops). +

    Filtering Overview

    + +There are many more combinations named in mime.convs. However, you are not limited to use the ones pre-defined there. You can plug in any filter you like into the CUPS framework. It must meet, or must be made -to meet some minimal requirements. If you find (or write) a cool +to meet, some minimal requirements. If you find (or write) a cool conversion filter of some kind, make sure it complies to what CUPS -needs, and put in the right lines in mime.types +needs and put in the right lines in mime.types and mime.convs, then it will work seamlessly -inside CUPS! -

    Tip

    -The mentioned "CUPS requirements" for filters are simple. Take +inside CUPS. +

    Filter requirements

    +The mentioned “CUPS requirements” for filters are simple. Take filenames or stdin as input and write to stdout. They should take these 5 or 6 arguments: printer job user title copies options [filename] -

    Printer

    The name of the printer queue (normally this is the -name of the filter being run)

    job

    The numeric job ID for the job being -printed

    user

    The string from the originating-user-name -attribute

    title

    The string from the job-name attribute

    copies

    The numeric value from the number-copies -attribute

    options

    The job options

    filename

    (Optionally) The print request file (if missing, +

    Printer

    The name of the printer queue (normally this is the +name of the filter being run).

    job

    The numeric job ID for the job being +printed.

    user

    The string from the originating-user-name +attribute.

    title

    The string from the job-name attribute.

    copies

    The numeric value from the number-copies +attribute.

    options

    The job options.

    filename

    (Optionally) The print request file (if missing, filters expected data fed through stdin). In most -cases it is very easy to write a simple wrapper script around existing -filters to make them work with CUPS.

    Prefilters

    -As was said, PostScript is the central file format to any UNIX based +cases, it is easy to write a simple wrapper script around existing +filters to make them work with CUPS.

    Prefilters

    + +As previously stated, PostScript is the central file format to any UNIX-based printing system. From PostScript, CUPS generates raster data to feed non-PostScript printers.

    -But what is happening if you send one of the supported non-PS formats -to print? Then CUPS runs "pre-filters" on these input formats to +But what happens if you send one of the supported non-PS formats +to print? Then CUPS runs “pre-filters” on these input formats to generate PostScript first. There are pre-filters to create PS from -ASCII text, PDF, DVI or HP-GL. The outcome of these filters is always -of MIME type application/postscript (meaning that +ASCII text, PDF, DVI, or HP-GL. The outcome of these filters is always +of MIME type application/postscript (meaning that any device-specific print options are not yet embedded into the PostScript by CUPS, and that the next filter to be called is pstops). Another pre-filter is running on all supported image formats, -the imagetops filter. Its outcome is always of -MIME type application/vnd.cups-postscript -(not application/postscript), meaning it has the +the imagetops filter. Its outcome is always of +MIME type application/vnd.cups-postscript +(not application/postscript), meaning it has the print options already embedded into the file.

    -

    Figure 19.4. Prefiltering in CUPS to form Postscript

    Prefiltering in CUPS to form Postscript

    -

    pstops

    -pstopsis the filter to convert -application/postscript to -application/vnd.cups-postscript. It was said +

    Figure 19.4. Pre-filtering in CUPS to form PostScript.

    Pre-filtering in CUPS to form PostScript.

    +

    pstops

    +pstops is the filter to convert +application/postscript to +application/vnd.cups-postscript. It was said above that this filter inserts all device-specific print options (commands to the printer to ask for the duplexing of output, or -stapling an punching it, etc.) into the PostScript file. +stapling and punching it, and so on) into the PostScript file.

    -

    Figure 19.5. Adding Device-specific Print Options

    Adding Device-specific Print Options

    +

    Figure 19.5. Adding device-specific print options.

    Adding device-specific print options.

    -This is not all: other tasks performed by it are: +This is not all. Other tasks performed by it are:

    • -selecting the range of pages to be printed (if you choose to -print only pages "3, 6, 8-11, 16, 19-21", or only the odd numbered -ones) +Selecting the range of pages to be printed (if you choose to +print only pages “3, 6, 8-11, 16, 19-21”, or only the odd numbered +ones).

    • -putting 2 or more logical pages on one sheet of paper (the -so-called "number-up" function) -

    • counting the pages of the job to insert the accounting -information into the /var/log/cups/page_log -

    pstoraster

    -pstoraster is at the core of the CUPS filtering +Putting 2 or more logical pages on one sheet of paper (the +so-called “number-up” function). +

  • Counting the pages of the job to insert the accounting +information into the /var/log/cups/page_log. +

  • pstoraster

    +pstoraster is at the core of the CUPS filtering system. It is responsible for the first stage of the rasterization process. Its input is of MIME type application/vnd.cups-postscript; its output is application/vnd.cups-raster. This output format is not yet meant to be printable. Its aim is to serve as a general purpose -input format for more specialized raster drivers, +input format for more specialized raster drivers that are able to generate device-specific printer data.

    -

    Figure 19.6. Postscript to intermediate Raster format

    Postscript to intermediate Raster format

    +

    Figure 19.6. PostScript to intermediate raster format.

    PostScript to intermediate raster format.

    CUPS raster is a generic raster format with powerful features. It is -able to include per-page information, color profiles and more to be +able to include per-page information, color profiles, and more, to be used by the following downstream raster drivers. Its MIME type is -registered with IANA and its specification is of course completely -open. It is designed to make it very easy and inexpensive for +registered with IANA and its specification is, of course, completely +open. It is designed to make it quite easy and inexpensive for manufacturers to develop Linux and UNIX raster drivers for their printer models, should they choose to do so. CUPS always takes care -for the first stage of rasterization so these vendors don't need to care +for the first stage of rasterization so these vendors do not need to care about Ghostscript complications (in fact, there is currently more than one vendor financing the development of CUPS raster drivers).

    -

    Figure 19.7. CUPS-raster production using Ghostscript

    CUPS-raster production using Ghostscript

    +

    Figure 19.7. CUPS-raster production using Ghostscript.

    CUPS-raster production using Ghostscript.

    CUPS versions before version 1.1.15 were shipping a binary (or source -code) standalone filter, named "pstoraster". pstoraster was derived +code) standalone filter, named pstoraster. pstoraster was derived from GNU Ghostscript 5.50, and could be installed besides and in addition to any GNU or AFPL Ghostscript package without conflicting.

    -From version 1.1.15, this has changed. The functions for this has been +>From version 1.1.15, this has changed. The functions for this have been integrated back into Ghostscript (now based on GNU Ghostscript version -7.05). The "pstoraster" filter is now a simple shell script calling +7.05). The pstoraster filter is now a simple shell script calling gs with the -sDEVICE=cups -parameter. If your Ghostscript doesn't show a success on asking for +parameter. If your Ghostscript does not show a success on asking for gs -h |grep cups, you might not be able to -print. Update your Ghostscript then! -

    imagetops and imagetoraster

    -Above in the section about prefilters, we mentioned the prefilter -that generates PostScript from image formats. The imagetoraster +print. Update your Ghostscript. +

    imagetops and imagetoraster

    +In the section about pre-filters, we mentioned the pre-filter +that generates PostScript from image formats. The imagetoraster filter is used to convert directly from image to raster, without the intermediate PostScript stage. It is used more often than the above -mentioned prefilters. Here is a summarizing flowchart of image file -filtering: +mentioned pre-filters. A summarizing flowchart of image file +filtering is shown in .

    -

    Figure 19.8. Image format to CUPS-raster format conversion

    Image format to CUPS-raster format conversion

    -

    rasterto [printers specific]

    -CUPS ships with quite some different raster drivers processing CUPS +

    Figure 19.8. Image format to CUPS-raster format conversion.

    Image format to CUPS-raster format conversion.

    +

    rasterto [printers specific]

    +CUPS ships with quite different raster drivers processing CUPS raster. On my system I find in /usr/lib/cups/filter/ these: rastertoalps, rastertobj, rastertoepson, rastertoescp, rastertopcl, rastertoturboprint, rastertoapdk, rastertodymo, -rastertoescp, rastertohp and +rastertoescp, rastertohp, and rastertoprinter. Don't worry if you have less than this; some of these are installed by commercial add-ons to CUPS (like rastertoturboprint), others (like -rastertoprinter) by 3rd party driver +rastertoprinter) by third-party driver development projects (such as Gimp-Print) wanting to cooperate as closely as possible with CUPS.

    -

    Figure 19.9. Raster to Printer Specific formats

    Raster to Printer Specific formats

    -

    CUPS Backends

    -The last part of any CUPS filtering chain is a "backend". Backends +

    Figure 19.9. Raster to printer-specific formats.

    Raster to printer-specific formats.

    +

    CUPS Backends

    +The last part of any CUPS filtering chain is a backend. Backends are special programs that send the print-ready file to the final device. There is a separate backend program for any transfer -"protocol" of sending printjobs over the network, or for every local -interface. Every CUPS printqueue needs to have a CUPS "device-URI" +protocol of sending printjobs over the network, or for every local +interface. Every CUPS print queue needs to have a CUPS “device-URI” associated with it. The device URI is the way to encode the backend used to send the job to its destination. Network device-URIs are using two slashes in their syntax, local device URIs only one, as you can see from the following list. Keep in mind that local interface names may vary much from my examples, if your OS is not Linux: -

    usb

    -This backend sends printfiles to USB-connected printers. An -example for the CUPS device-URI to use is: -usb:/dev/usb/lp0 -

    serial

    -This backend sends printfiles to serially connected printers. -An example for the CUPS device-URI to use is: -serial:/dev/ttyS0?baud=11500 -

    parallel

    -This backend sends printfiles to printers connected to the -parallel port. An example for the CUPS device-URI to use is: -parallel:/dev/lp0 -

    scsi

    -This backend sends printfiles to printers attached to the -SCSI interface. An example for the CUPS device-URI to use is: -scsi:/dev/sr1 -

    lpd

    -This backend sends printfiles to LPR/LPD connected network -printers. An example for the CUPS device-URI to use is: -lpd://remote_host_name/remote_queue_name -

    AppSocket/HP JetDirect

    -This backend sends printfiles to AppSocket (a.k.a. "HP -JetDirect") connected network printers. An example for the CUPS -device-URI to use is: -socket://10.11.12.13:9100 -

    ipp

    -This backend sends printfiles to IPP connected network -printers (or to other CUPS servers). Examples for CUPS device-URIs -to use are: -ipp:://192.193.194.195/ipp -(for many HP printers) or -ipp://remote_cups_server/printers/remote_printer_name -

    http

    -This backend sends printfiles to HTTP connected printers. -(The http:// CUPS backend is only a symlink to the ipp:// backend.) -Examples for the CUPS device-URIs to use are: -http:://192.193.194.195:631/ipp -(for many HP printers) or -http://remote_cups_server:631/printers/remote_printer_name -

    smb

    -This backend sends printfiles to printers shared by a Windows -host. An example for CUPS device-URIs to use are: -smb://workgroup/server/printersharename -Or -smb://server/printersharename -or -smb://username:password@workgroup/server/printersharename -or -smb://username:password@server/printersharename. -The smb:// backend is a symlink to the Samba utility -smbspool (doesn't ship with CUPS). If the -symlink is not present in your CUPS backend directory, have your -root user create it: ln -s `which smbspool` -/usr/lib/cups/backend/smb. -

    -It is easy to write your own backends as Shell or Perl scripts, if you +

    usb

    + This backend sends printfiles to USB-connected printers. An + example for the CUPS device-URI to use is: + usb:/dev/usb/lp0. +

    serial

    + This backend sends printfiles to serially connected printers. + An example for the CUPS device-URI to use is: + serial:/dev/ttyS0?baud=11500. +

    parallel

    + This backend sends printfiles to printers connected to the + parallel port. An example for the CUPS device-URI to use is: + parallel:/dev/lp0. +

    scsi

    + This backend sends printfiles to printers attached to the + SCSI interface. An example for the CUPS device-URI to use is: + scsi:/dev/sr1. +

    lpd

    + This backend sends printfiles to LPR/LPD connected network + printers. An example for the CUPS device-URI to use is: + lpd://remote_host_name/remote_queue_name. +

    AppSocket/HP JetDirect

    + This backend sends printfiles to AppSocket (a.k.a. "HP + JetDirect") connected network printers. An example for the CUPS + device-URI to use is: + socket://10.11.12.13:9100. +

    ipp

    + This backend sends printfiles to IPP connected network + printers (or to other CUPS servers). Examples for CUPS device-URIs + to use are: + ipp:://192.193.194.195/ipp + (for many HP printers) or + ipp://remote_cups_server/printers/remote_printer_name. +

    http

    + This backend sends printfiles to HTTP connected printers. + (The http:// CUPS backend is only a symlink to the ipp:// backend.) + Examples for the CUPS device-URIs to use are: + http:://192.193.194.195:631/ipp + (for many HP printers) or + http://remote_cups_server:631/printers/remote_printer_name. +

    smb

    + This backend sends printfiles to printers shared by a Windows + host. An example for CUPS device-URIs that may be used includes: +

    +

    smb://workgroup/server/printersharename
    smb://server/printersharename
    smb://username:password@workgroup/server/printersharename
    smb://username:password@server/printersharename

    +

    + The smb:// backend is a symlink to the Samba utility + smbspool (does not ship with CUPS). If the + symlink is not present in your CUPS backend directory, have your + root user create it: ln -s `which smbspool' + /usr/lib/cups/backend/smb. +

    +It is easy to write your own backends as shell or Perl scripts, if you need any modification or extension to the CUPS print system. One -reason could be that you want to create "special" printers which send -the printjobs as email (through a "mailto:/" backend), convert them to -PDF (through a "pdfgen:/" backend) or dump them to "/dev/null" (In +reason could be that you want to create “special” printers that send +the printjobs as email (through a “mailto:/” backend), convert them to +PDF (through a “pdfgen:/” backend) or dump them to “/dev/null”. (In fact I have the system-wide default printer set up to be connected to -a "devnull:/" backend: there are just too many people sending jobs -without specifying a printer, or scripts and programs which don't name +a devnull:/ backend: there are just too many people sending jobs +without specifying a printer, or scripts and programs which do not name a printer. The system-wide default deletes the job and sends a polite -mail back to the $USER asking him to always specify a correct -printername). +email back to the $USER asking him to always specify the correct +printer name.)

    Not all of the mentioned backends may be present on your system or usable (depending on your hardware configuration). One test for all @@ -824,315 +856,332 @@ utility. Used with the -v parameter, it lists all available backends:

     $ lpinfo -v
    -

    cupsomatic/Foomatic -- how do they fit into the Picture?

    -"cupsomatic" filters may be the most widely used on CUPS +

    The Role of cupsomatic/foomatic

    + + +cupsomatic filters may be the most widely used on CUPS installations. You must be clear about the fact that these were not -developed by the CUPS people. They are a "Third Party" add-on to +developed by the CUPS people. They are a third party add-on to CUPS. They utilize the traditional Ghostscript devices to render jobs for CUPS. When troubleshooting, you should know about the difference. Here the whole rendering process is done in one stage, -inside Ghostscript, using an appropriate "device" for the target -printer. cupsomatic uses PPDs which are generated from the "Foomatic" +inside Ghostscript, using an appropriate device for the target +printer. cupsomatic uses PPDs that are generated from the Foomatic Printer & Driver Database at Linuxprinting.org.

    You can recognize these PPDs from the line calling the -cupsomatic filter: -

    - *cupsFilter: "application/vnd.cups-postscript  0  cupsomatic"
    +cupsomatic filter:
    +
    +

    + *cupsFilter: "application/vnd.cups-postscript  0  cupsomatic"
     

    -This line you may find amongst the first 40 or so lines of the PPD + +You may find this line among the first 40 or so lines of the PPD file. If you have such a PPD installed, the printer shows up in the -CUPS web interface with a foomatic namepart for -the driver description. cupsomatic is a Perl script that runs -Ghostscript, with all the complicated commandline options -auto-constructed from the selected PPD and commandline options give to +CUPS Web interface with a foomatic namepart for +the driver description. cupsomatic is a Perl script that runs +Ghostscript with all the complicated command line options +auto-constructed from the selected PPD and command line options give to the printjob. -

    -However, cupsomatic is now deprecated. Its PPDs (especially the first +

    + + However, cupsomatic is now deprecated. Its PPDs (especially the first generation of them, still in heavy use out there) are not meeting the Adobe specifications. You might also suffer difficulties when you try -to download them with "Point'n'Print" to Windows clients. A better, -and more powerful successor is now in a very stable Beta-version -available: it is called foomatic-rip. To use -foomatic-rip as a filter with CUPS, you need the new-type PPDs. These -have a similar, but different line: -

    -
    - *cupsFilter: "application/vnd.cups-postscript  0  foomatic-rip"
    +to download them with “Point'n'Print” to Windows clients. A better
    +and more powerful successor is now in a stable beta-version: it is called foomatic-rip. To use
    +foomatic-rip as a filter with CUPS, you need the new-type PPDs. These
    +have a similar but different line:
     
    +

    + *cupsFilter: "application/vnd.cups-postscript  0  foomatic-rip"
     

    + The PPD generating engine at Linuxprinting.org has been revamped. The new PPDs comply to the Adobe spec. On top, they also provide a new way to specify different quality levels (hi-res photo, normal -color, grayscale, draft...) with a single click (whereas before you -could have required 5 or more different selections (media type, -resolution, inktype, dithering algorithm...). There is support for +color, grayscale, and draft) with a single click, whereas before you +could have required five or more different selections (media type, +resolution, inktype and dithering algorithm). There is support for custom-size media built in. There is support to switch -print-options from page to page, in the middle of a job. And the -best thing is: the new foomatic-rip now works seamlessly with all -legacy spoolers too (like LPRng, BSD-LPD, PDQ, PPR etc.), providing -for them access to use PPDs for their printing! -

    The Complete Picture

    -If you want to see an overview over all the filters and how they +print-options from page to page in the middle of a job. And the +best thing is the new foomatic-rip now works seamlessly with all +legacy spoolers too (like LPRng, BSD-LPD, PDQ, PPR and so on), providing +for them access to use PPDs for their printing. +

    The Complete Picture

    +If you want to see an overview of all the filters and how they relate to each other, the complete picture of the puzzle is at the end of this document. -

    mime.convs

    +

    mime.convs

    CUPS auto-constructs all possible filtering chain paths for any given MIME type, and every printer installed. But how does it decide in -favor or against a specific alternative? (There may often be cases, +favor or against a specific alternative? (There may often be cases where there is a choice of two or more possible filtering chains for -the same target printer). Simple: you may have noticed the figures in -the 3rd column of the mime.convs file. They represent virtual costs +the same target printer.) Simple. You may have noticed the figures in +the third column of the mime.convs file. They represent virtual costs assigned to this filter. Every possible filtering chain will sum up to -a total "filter cost". CUPS decides for the most "inexpensive" route. +a total “filter cost.” CUPS decides for the most “inexpensive” route.

    Tip

    The setting of FilterLimit 1000 in cupsd.conf will not allow more filters to run concurrently than will consume a total of 1000 virtual filter -cost. This is a very efficient way to limit the load of any CUPS -server by setting an appropriate "FilterLimit" value. A FilterLimit of -200 allows roughly 1 job at a time, while a FilterLimit of 1000 allows -approximately 5 jobs maximum at a time. -

    "Raw" printing

    -You can tell CUPS to print (nearly) any file "raw". "Raw" means it -will not be filtered. CUPS will send the file to the printer "as is" +cost. This is an efficient way to limit the load of any CUPS +server by setting an appropriate “FilterLimit” value. A FilterLimit of +200 allows roughly one job at a time, while a FilterLimit of 1000 allows +approximately five jobs maximum at a time. +

    Raw” Printing

    + You can tell CUPS to print (nearly) any file “raw”. “Raw” means it + will not be filtered. CUPS will send the file to the printer “as is” without bothering if the printer is able to digest it. Users need to take care themselves that they send sensible data formats only. Raw -printing can happen on any queue if the "-o raw" option is specified +printing can happen on any queue if the “-o raw” option is specified on the command line. You can also set up raw-only queues by simply not associating any PPD with it. This command:

     $ lpadmin -P rawprinter -v socket://11.12.13.14:9100 -E
     

    -sets up a queue named "rawprinter", connected via the "socket" -protocol (a.k.a. "HP JetDirect") to the device at IP address + sets up a queue named “rawprinter”, connected via the “socket” + protocol (a.k.a. “HP JetDirect”) to the device at IP address 11.12.1.3.14, using port 9100. (If you had added a PPD with -P /path/to/PPD to this command line, you would -have installed a "normal" printqueue. +have installed a “normal” print queue.

    -CUPS will automatically treat each job sent to a queue as a "raw" one, -if it can't find a PPD associated with the queue. However, CUPS will +CUPS will automatically treat each job sent to a queue as a “raw” one, +if it can't find a PPD associated with the queue. However, CUPS will only send known MIME types (as defined in its own mime.types file) and refuse others. -

    "application/octet-stream" printing

    +

    application/octet-stream Printing

    Any MIME type with no rule in the /etc/cups/mime.types file is regarded as unknown -or application/octet-stream and will not be +or application/octet-stream and will not be sent. Because CUPS refuses to print unknown MIME types per default, -you will probably have experienced the fact that printjobs originating +you will probably have experienced the fact that print jobs originating from Windows clients were not printed. You may have found an error message in your CUPS logs like: -

    +

    Unable to convert file 0 to printable format for job -

    -To enable the printing of "application/octet-stream" files, edit +

    +To enable the printing of application/octet-stream files, edit these two files:

    • /etc/cups/mime.convs

    • /etc/cups/mime.types

    Both contain entries (at the end of the respective files) which must be uncommented to allow RAW mode operation for -application/octet-stream. In /etc/cups/mime.types +application/octet-stream. In /etc/cups/mime.types make sure this line is present: -

    - application/octet-stream
    +
    +
    +
    +

    +application/octet-stream
     

    + This line (with no specific auto-typing rule set) makes all files -not otherwise auto-typed a member of application/octet-stream. In +not otherwise auto-typed a member of application/octet-stream. In /etc/cups/mime.convs, have this line: -

    - application/octet-stream   application/vnd.cups-raw   0   -
    -

    + +

    +application/octet-stream   application/vnd.cups-raw   0   -
    +

    + + + This line tells CUPS to use the Null Filter -(denoted as "-", doing... nothing at all) on -application/octet-stream, and tag the result as -application/vnd.cups-raw. This last one is +(denoted as “-”, doing nothing at all) on +application/octet-stream, and tag the result as +application/vnd.cups-raw. This last one is always a green light to the CUPS scheduler to now hand the file over -to the "backend" connecting to the printer and sending it over. -

    Note

    Editing the mime.convs and the +to the backend connecting to the printer and sending it over. +

    Note

    Editing the mime.convs and the mime.types file does not -enforce "raw" printing, it only +enforceraw” printing, it only allows it.

    Background.  CUPS being a more security-aware printing system than traditional ones does not by default allow one to send deliberate (possibly binary) -data to printing devices. (This could be easily abused to launch a +data to printing devices. (This could be easily abused to launch a Denial of Service attack on your printer(s), causing at least the loss -of a lot of paper and ink...) "Unknown" data are regarded by CUPS +of a lot of paper and ink...) “Unknown” data are regarded by CUPS as MIME type application/octet-stream. While you -can send data "raw", the MIME type for these must +can send data “raw”, the MIME type for these must be one that is known to CUPS and an allowed one. The file -/etc/cups/mime.types defines the "rules" how CUPS +/etc/cups/mime.types defines the “rules” of how CUPS recognizes MIME types. The file /etc/cups/mime.convs decides which file conversion filter(s) may be applied to which MIME types. -

    PostScript Printer Descriptions (PPDs) for non-PS Printers

    +

    PostScript Printer Descriptions (PPDs) for Non-PS Printers

    + Originally PPDs were meant to be used for PostScript printers only. Here, they help to send device-specific commands and settings to the RIP which processes the jobfile. CUPS has extended this scope for PPDs to cover non-PostScript printers too. This was not -very difficult, because it is a standardized file format. In a way +difficult, because it is a standardized file format. In a way it was logical too: CUPS handles PostScript and uses a PostScript -RIP (=Ghostscript) to process the jobfiles. The only difference is: +RIP (Ghostscript) to process the jobfiles. The only difference is: a PostScript printer has the RIP built-in, for other types of printers the Ghostscript RIP runs on the host computer.

    PPDs for a non-PS printer have a few lines that are unique to CUPS. The most important one looks similar to this: -

    +
    +
    +
    +

      *cupsFilter: application/vnd.cups-raster  66   rastertoprinter
     

    + It is the last piece in the CUPS filtering puzzle. This line tells the -CUPS daemon to use as a last filter "rastertoprinter". This filter -should be served as input an "application/vnd.cups-raster" MIME type -file. Therefore CUPS should auto-construct a filtering chain, which +CUPS daemon to use as a last filter rastertoprinter. This filter +should be served as input an application/vnd.cups-raster MIME type +file. Therefore, CUPS should auto-construct a filtering chain, which delivers as its last output the specified MIME type. This is then -taken as input to the specified "rastertoprinter" filter. After this -the last filter has done its work ("rastertoprinter" is a Gimp-Print +taken as input to the specified rastertoprinter filter. After this +the last filter has done its work (rastertoprinter is a Gimp-Print filter), the file should go to the backend, which sends it to the output device.

    CUPS by default ships only a few generic PPDs, but they are good for several hundred printer models. You may not be able to control different paper trays, or you may get larger margins than your -specific model supports): -

    Table 19.1. PPD's shipped with CUPS

    PPD filePrinter type
    deskjet.ppdolder HP inkjet printers and compatible
    deskjet2.ppdnewer HP inkjet printers and compatible
    dymo.ppdlabel printers
    epson9.ppdEpson 24pin impact printers and compatible
    epson24.ppdEpson 24pin impact printers and compatible
    okidata9.ppdOkidata 9pin impact printers and compatible
    okidat24.ppdOkidata 24pin impact printers and compatible
    stcolor.ppdolder Epson Stylus Color printers
    stcolor2.ppdnewer Epson Stylus Color printers
    stphoto.ppdolder Epson Stylus Photo printers
    stphoto2.ppdnewer Epson Stylus Photo printers
    laserjet.ppdall PCL printers. Further below is a discussion of several other driver/PPD-packages suitable for use with CUPS.

    Difference between cupsomatic/foomatic-rip and -native CUPS printing

    -Native CUPS rasterization works in two steps. +specific model supports. See for summary information. +

    Table 19.1. PPDs shipped with CUPS

    PPD filePrinter type
    deskjet.ppdolder HP inkjet printers and compatible
    deskjet2.ppdnewer HP inkjet printers and compatible
    dymo.ppdlabel printers
    epson9.ppdEpson 24pin impact printers and compatible
    epson24.ppdEpson 24pin impact printers and compatible
    okidata9.ppdOkidata 9pin impact printers and compatible
    okidat24.ppdOkidata 24pin impact printers and compatible
    stcolor.ppdolder Epson Stylus Color printers
    stcolor2.ppdnewer Epson Stylus Color printers
    stphoto.ppdolder Epson Stylus Photo printers
    stphoto2.ppdnewer Epson Stylus Photo printers
    laserjet.ppdall PCL printers. Further below is a discussion + of several other driver/PPD-packages suitable for use with CUPS.

    cupsomatic/foomatic-rip Versus native CUPS Printing

    + + +Native CUPS rasterization works in two steps:

    • -First is the "pstoraster" step. It uses the special "cups" - -device from ESP Ghostscript 7.05.x as its tool +First is the pstoraster step. It uses the special CUPS + +device from ESP Ghostscript 7.05.x as its tool.

    • -Second comes the "rasterdriver" step. It uses various +Second comes the rasterdriver step. It uses various device-specific filters; there are several vendors who provide good -quality filters for this step, some are Free Software, some are -Shareware/Non-Free, some are proprietary.

    +quality filters for this step. Some are free software, some are +shareware/non-free and some are proprietary.

    Often this produces better quality (and has several more advantages) than other methods.

    -

    Figure 19.10. cupsomatic/foomatic processing versus Native CUPS

    cupsomatic/foomatic processing versus Native CUPS

    +

    Figure 19.10. cupsomatic/foomatic Processing versus Native CUPS.

    cupsomatic/foomatic Processing versus Native CUPS.

    -One other method is the cupsomatic/foomatic-rip -way. Note that cupsomatic is not made by the CUPS +One other method is the cupsomatic/foomatic-rip +way. Note that cupsomatic is not made by the CUPS developers. It is an independent contribution to printing development, -made by people from Linuxprinting.org (see also http://www.cups.org/cups-help.html). -cupsomatic is no longer developed and maintained and is no longer +made by people from Linuxprinting.org [4]. +cupsomatic is no longer developed and maintained and is no longer supported. It has now been replaced by -foomatic-rip. foomatic-rip is a complete re-write -of the old cupsomatic idea, but very much improved and generalized to +foomatic-rip. foomatic-rip is a complete re-write +of the old cupsomatic idea, but very much improved and generalized to other (non-CUPS) spoolers. An upgrade to foomatic-rip is strongly -advised, especially if you are upgrading to a recent version of CUPS +advised, especially if you are upgrading to a recent version of CUPS, too.

    - - -Both the cupsomatic (old) and the foomatic-rip (new) methods from + + +Both the cupsomatic (old) and the foomatic-rip (new) methods from Linuxprinting.org use the traditional Ghostscript print file processing, doing everything in a single step. It therefore relies on -all the other devices built-in into Ghostscript. The quality is as +all the other devices built into Ghostscript. The quality is as good (or bad) as Ghostscript rendering is in other spoolers. The advantage is that this method supports many printer models not supported (yet) by the more modern CUPS method.

    Of course, you can use both methods side by side on one system (and -even for one printer, if you set up different queues), and find out +even for one printer, if you set up different queues) and find out which works best for you.

    -cupsomatic "kidnaps" the printfile after the -application/vnd.cups-postscript stage and -deviates it through the CUPS-external, system wide Ghostscript -installation: Therefore the printfile bypasses the "pstoraster" filter -(and thus also bypasses the CUPS-raster-drivers -"rastertosomething"). After Ghostscript finished its rasterization, -cupsomatic hands the rendered file directly to the CUPS backend. The -flowchart above illustrates the difference between native CUPS -rendering and the Foomatic/cupsomatic method. -

    Examples for filtering Chains

    +cupsomatic kidnaps the printfile after the +application/vnd.cups-postscript stage and +deviates it through the CUPS-external, system-wide Ghostscript +installation. Therefore the printfile bypasses the pstoraster filter +(and also bypasses the CUPS-raster-drivers +rastertosomething). After Ghostscript finished its rasterization, +cupsomatic hands the rendered file directly to the CUPS backend. The +flowchart in illustrates the difference between native CUPS +rendering and the Foomatic/cupsomatic method. +

    Examples for Filtering Chains

    Here are a few examples of commonly occurring filtering chains to illustrate the workings of CUPS.

    -Assume you want to print a PDF file to a HP JetDirect-connected +Assume you want to print a PDF file to an HP JetDirect-connected PostScript printer, but you want to print the pages 3-5, 7, 11-13 -only, and you want to print them "2-up" and "duplex": -

    • your print options (page selection as required, 2-up, -duplex) are passed to CUPS on the commandline;

    • the (complete) PDF file is sent to CUPS and autotyped as -application/pdf;

    • the file therefore first must pass the -pdftops pre-filter, which produces PostScript -MIME type application/postscript (a preview here -would still show all pages of the original PDF);

    • the file then passes the pstops -filter which applies the commandline options: it selects the pages -2-5, 7 and 11-13, creates and imposed layout "2 pages on 1 sheet" and -inserts the correct "duplex" command (as is defined in the printer's -PPD) into the new PostScript file; the file now is of PostScript MIME +only, and you want to print them “two-up” and “duplex”: +

      • Your print options (page selection as required, two-up, +duplex) are passed to CUPS on the command line.

      • The (complete) PDF file is sent to CUPS and autotyped as +application/pdf.

      • The file therefore must first pass the +pdftops pre-filter, which produces PostScript +MIME type application/postscript (a preview here +would still show all pages of the original PDF).

      • The file then passes the pstops +filter that applies the command line options: it selects the pages +2-5, 7 and 11-13, creates an imposed layout “2 pages on 1 sheet” and +inserts the correct “duplex” command (as defined in the printer's +PPD) into the new PostScript file; the file is now of PostScript MIME type -application/vnd.cups-postscript;

      • the file goes to the socket +application/vnd.cups-postscript.

      • The file goes to the socket backend, which transfers the job to the printers.

      - The resulting filter chain therefore is as drawn in the image below. -

      Figure 19.11. PDF to socket chain

      PDF to socket chain

      + The resulting filter chain, therefore, is as drawn in . +

      Figure 19.11. PDF to socket chain.

      PDF to socket chain.

      Assume your want to print the same filter to an USB-connected -Epson Stylus Photo printer, installed with the CUPS +Epson Stylus Photo printer installed with the CUPS stphoto2.ppd. The first few filtering stages are nearly the same: -

      • your print options (page selection as required, 2-up, -duplex) are passed to CUPS on the commandline;

      • the (complete) PDF file is sent to CUPS and autotyped as -application/pdf;

      • the file therefore first must pass the -pdftops pre-filter, which produces PostScript -MIME type application/postscript (a preview here -would still show all pages of the original PDF);

      • the file then passes the "pstops" filter which applies +

        • Your print options (page selection as required, two-up, +duplex) are passed to CUPS on the commandline.

        • The (complete) PDF file is sent to CUPS and autotyped as +application/pdf.

        • The file must first pass the +pdftops pre-filter, which produces PostScript +MIME type application/postscript (a preview here +would still show all pages of the original PDF).

        • The file then passes the “pstops” filter that applies the commandline options: it selects the pages 2-5, 7 and 11-13, -creates and imposed layout "2 pages on 1 sheet" and inserts the -correct "duplex" command... (OOoops -- this printer and his PPD -don't support duplex printing at all -- this option will be ignored -then) into the new PostScript file; the file now is of PostScript +creates an imposed layout “two pages on one sheet” and inserts the +correct “duplex” command... (Oops this printer and PPD +do not support duplex printing at all so this option will +be ignored) into the new PostScript file; the file is now of PostScript MIME type -application/vnd.cups-postscript;

        • the file then passes the -pstoraster stage and becomes MIME type -application/cups-raster;

        • finally, the rastertoepson filter -does its work (as is indicated in the printer's PPD), creating the -printer-specific raster data and embedding any user-selected -print-options into the print data stream;

        • the file goes to the usb backend, +application/vnd.cups-postscript.

        • The file then passes the + +pstoraster stage and becomes MIME type +application/ +cups-raster.

        • Finally, the rastertoepson filter +does its work (as indicated in the printer's PPD), creating the +rinter-specific raster data and embedding any user-selected +print-options into the print data stream.

        • The file goes to the usb backend, which transfers the job to the printers.

        - The resulting filter chain therefore is as drawn in the image below. -

        Figure 19.12. PDF to USB chain

        PDF to USB chain

      Sources of CUPS drivers / PPDs

      -On the internet you can find now many thousand CUPS-PPD files -(with their companion filters), in many national languages, -supporting more than 1000 non-PostScript models. -

      • ESP -PrintPro (commercial, -non-Free) is packaged with more than 3000 PPDs, ready for -successful use "out of the box" on Linux, Mac OS X, IBM-AIX, -HP-UX, Sun-Solaris, SGI-IRIX, Compaq Tru64, Digital UNIX and some + The resulting filter chain therefore is as drawn in . +

        Figure 19.12. PDF to USB chain.

        PDF to USB chain.

      Sources of CUPS Drivers/PPDs

      +On the Internet you can now find many thousands of CUPS-PPD files +(with their companion filters), in many national languages +supporting more than thousand non-PostScript models. +

      • ESP +PrintPro (commercial, +non-free) is packaged with more than three thousand PPDs, ready for +successful use “out of the box” on Linux, Mac OS X, IBM-AIX, +HP-UX, Sun-Solaris, SGI-IRIX, Compaq Tru64, Digital UNIX, and some more commercial Unices (it is written by the CUPS developers themselves and its sales help finance the further development of -CUPS, as they feed their creators).

      • the Gimp-Print-Project - (GPL, Free Software) +CUPS, as they feed their creators).

      • The Gimp-Print-Project + (GPL, free software) provides around 140 PPDs (supporting nearly 400 printers, many driven to photo quality output), to be used alongside the Gimp-Print CUPS -filters;

      • TurboPrint - (Shareware, non-Free) supports +filters.

      • TurboPrint + (shareware, non-free) supports roughly the same amount of printers in excellent -quality;

      • OMNI - -(LPGL, Free) is a package made by IBM, now containing support for more +quality.

      • OMNI + +(LPGL, free) is a package made by IBM, now containing support for more than 400 printers, stemming from the inheritance of IBM OS/2 Know-How -ported over to Linux (CUPS support is in a Beta-stage at -present);

      • HPIJS - (BSD-style licenses, Free) +ported over to Linux (CUPS support is in a beta-stage at +present).

      • HPIJS + (BSD-style licenses, free) supports around 150 of HP's own printers and is also providing excellent print quality now (currently available only via the Foomatic -path);

      • Foomatic/cupsomatic - (LPGL, Free) from +path).

      • Foomatic/cupsomatic + (LPGL, free) from Linuxprinting.org are providing PPDs for practically every Ghostscript filter known to the world (including Omni, Gimp-Print and -HPIJS).

      Note

      -The cupsomatic/Foomatic trick from Linuxprinting.org works -differently from the other drivers. This is explained elsewhere in this -document. -

      Printing with Interface Scripts

      -CUPS also supports the usage of "interface scripts" as known from +HPIJS).

    Printing with Interface Scripts

    +CUPS also supports the usage of “interface scripts” as known from System V AT&T printing systems. These are often used for PCL -printers, from applications that generate PCL print jobs. Interface +printers, from applications that generate PCL print jobs. Interface scripts are specific to printer models. They have a similar role as PPDs for PostScript printers. Interface scripts may inject the Escape sequences as required into the print data stream, if the user has @@ -1145,126 +1194,138 @@ the -i option: root# lpadmin -p pclprinter -v socket://11.12.13.14:9100 \ -i /path/to/interface-script

    -Interface scripts might be the "unknown animal" to many. However, -with CUPS they provide the most easy way to plug in your own +Interface scripts might be the “unknown animal” to many. However, +with CUPS they provide the easiest way to plug in your own custom-written filtering script or program into one specific print queue (some information about the traditional usage of interface scripts is -to be found at http://playground.sun.com/printing/documentation/interface.html). -

    Network printing (purely Windows)

    +to be found at http://playground.sun.com/printing/documentation/interface.html). +

    Network Printing (Purely Windows)

    Network printing covers a lot of ground. To understand what exactly goes on with Samba when it is printing on behalf of its Windows -clients, let's first look at a "purely Windows" setup: Windows clients +clients, let's first look at a “purely Windows” setup: Windows clients with a Windows NT print server. -

    From Windows Clients to an NT Print Server

    +

    From Windows Clients to an NT Print Server

    Windows clients printing to an NT-based print server have two -options. They may -

    • execute the driver locally and render the GDI output -(EMF) into the printer specific format on their own, -or

    • send the GDI output (EMF) to the server, where the +options. They may: + + +

      • Execute the driver locally and render the GDI output + (EMF) into the printer-specific format on their own. +

      • Send the GDI output (EMF) to the server, where the driver is executed to render the printer specific output.

      -Both print paths are shown in the flowcharts below. -

    Driver Execution on the Client

    -In the first case the print server must spool the file as "raw", + Both print paths are shown in the flowcharts in the figures below. +

    Driver Execution on the Client

    +In the first case the print server must spool the file as raw, meaning it shouldn't touch the jobfile and try to convert it in any -way. This is what traditional UNIX-based print server can do too; and -at a better performance and more reliably than NT print server. This +way. This is what a traditional UNIX-based print server can do too, and +at a better performance and more reliably than an NT print server. This is what most Samba administrators probably are familiar with. One -advantage of this setup is that this "spooling-only" print server may +advantage of this setup is that this “spooling-only” print server may be used even if no driver(s) for UNIX are available it is sufficient -to have the Windows client drivers available and installed on the +to have the Windows client drivers available; and installed on the clients.

    -

    Figure 19.13. Print Driver execution on the Client

    Print Driver execution on the Client

    -

    Driver Execution on the Server

    -The other path executes the printer driver on the server. The clients +

    Figure 19.13. Print driver execution on the client.

    Print driver execution on the client.

    +

    Driver Execution on the Server

    + + + + + +The other path executes the printer driver on the server. The client transfers print files in EMF format to the server. The server uses the PostScript, PCL, ESC/P or other driver to convert the EMF file into the printer-specific language. It is not possible for UNIX to do the -same. Currently there is no program or method to convert a Windows +same. Currently, there is no program or method to convert a Windows client's GDI output on a UNIX server into something a printer could understand.

    -

    Figure 19.14. Print Driver execution on the Server

    Print Driver execution on the Server

    +

    Figure 19.14. Print driver execution on the server.

    Print driver execution on the server.

    -However, there is something similar possible with CUPS. Read on... -

    Network Printing (Windows clients -- UNIX/Samba Print +However, there is something similar possible with CUPS. Read on. +

    Network Printing (Windows Clients UNIX/Samba Print Servers)

    Since UNIX print servers cannot execute the Win32 program code on their platform, the picture is somewhat -different. However, this doesn't limit your options all that -much. In the contrary, you may have a way here to implement printing -features which are not possible otherwise. -

    From Windows Clients to a CUPS/Samba Print Server

    -Here is a simple recipe showing how you can take advantage of CUPS +different. However, this does not limit your options all that +much. On the contrary, you may have a way here to implement printing +features that are not possible otherwise. +

    From Windows Clients to a CUPS/Samba Print Server

    +Here is a simple recipe showing how you can take advantage of CUPS' powerful features for the benefit of your Windows network printing clients:

    • Let the Windows clients send PostScript to the CUPS -server.

    • Let the CUPS server render the PostScript into device -specific raster format.

    +server.

  • Let the CUPS server render the PostScript into device-specific raster format.

  • This requires the clients to use a PostScript driver (even if the printer is a non-PostScript model. It also requires that you have a -"driver" on the CUPS server. +driver on the CUPS server.

    -Firstly, to enable CUPS based printing through Samba the +First, to enable CUPS-based rinting through Samba the following options should be set in your smb.conf file [global] section: -

    • printing = cups

    • printcap = cups

    +

    printing = cups
    printcap = cups

    When these parameters are specified, all manually set print directives -(like print command, or lppause command) in smb.conf (as well as -in samba itself) will be ignored. Instead, Samba will directly -interface with CUPS through it's application program interface (API) - +(like print command, or lppause command) in smb.conf (as well as +in Samba itself) will be ignored. Instead, Samba will directly +interface with CUPS through its application program interface (API), as long as Samba has been compiled with CUPS library (libcups) -support. If Samba has NOT been compiled with CUPS support, and if no +support. If Samba has not been compiled with CUPS support, and if no other print commands are set up, then printing will use the System V AT&T command set, with the -oraw option automatically passing through (if you want your own defined print commands to work with a Samba that has CUPS support compiled in, -simply use printing = sysv). +simply use printing = sysv).

    -

    Figure 19.15. Printing via CUPS/samba server

    Printing via CUPS/samba server

    -

    Samba receiving Jobfiles and passing them to CUPS

    +

    Figure 19.15. Printing via CUPS/Samba server.

    Printing via CUPS/Samba server.

    +

    Samba Receiving Jobfiles and Passing Them to CUPS

    Samba must use its own spool directory (it is set -by a line similar to path = /var/spool/samba, +by a line similar to path = /var/spool/samba, in the [printers] or [printername] section of smb.conf). Samba receives the job in its own spool space and passes it into the spool directory of CUPS (the CUPS spooling directory is set by the RequestRoot directive, in a line that defaults to RequestRoot -/var/spool/cups). CUPS checks the access rights of its -spool dir and resets it to healthy values with every re-start. We have -seen quite some people who had used a common spooling space for Samba -and CUPS, and were struggling for weeks with this "problem". +/var/spool/cups). CUPS checks the access rights of its +spool dir and resets it to healthy values with every restart. We have +seen quite a few people who had used a common spooling space for Samba +and CUPS, and were struggling for weeks with this “problem.

    A Windows user authenticates only to Samba (by whatever means is configured). If Samba runs on the same host as CUPS, you only need to -allow "localhost" to print. If they run on different machines, you +allow “localhost” to print. If they run on different machines, you need to make sure the Samba host gets access to printing on CUPS. -

    Network PostScript RIP: CUPS Filters on Server -- clients use -PostScript Driver with CUPS-PPDs

    +

    Network PostScript RIP

    +This section discusses the use of CUPS filters on the server configuration where +clients make use of a PostScript driver with CUPS-PPDs. +

    + + + PPDs can control all print device options. They are usually provided -by the manufacturer; if you own a PostScript printer, that is. PPD +by the manufacturer, if you own a PostScript printer, that is. PPD files (PostScript Printer Descriptions) are always a component of PostScript printer drivers on MS Windows or Apple Mac OS systems. They are ASCII files containing user-selectable print options, mapped to appropriate PostScript, PCL or PJL commands for the target printer. Printer driver GUI dialogs translate these options -"on-the-fly" into buttons and drop-down lists for the user to select. +“on-the-fly” into buttons and drop-down lists for the user to select.

    CUPS can load, without any conversions, the PPD file from any Windows (NT is recommended) PostScript driver and handle the options. There is -a web browser interface to the print options (select http://localhost:631/printers/ -and click on one Configure Printer button to see -it), or a commandline interface (see man lpoptions -or see if you have lphelp on your system). There are also some +a Web browser interface to the print options (select http://localhost:631/printers/ +and click on one Configure Printer button to see +it), or a command line interface (see man lpoptions +or see if you have lphelp on your system). There are also some different GUI frontends on Linux/UNIX, which can present PPD options to users. PPD options are normally meant to be evaluated by the PostScript RIP on the real PostScript printer. -

    PPDs for non-PS Printers on UNIX

    -CUPS doesn't limit itself to "real" PostScript printers in its usage +

    PPDs for Non-PS Printers on UNIX

    + +CUPS does not limit itself to “real” PostScript printers in its usage of PPDs. The CUPS developers have extended the scope of the PPD -concept, to also describe available device and driver options for +concept to also describe available device and driver options for non-PostScript printers through CUPS-PPDs.

    This is logical, as CUPS includes a fully featured PostScript @@ -1272,104 +1333,109 @@ interpreter (RIP). This RIP is based on Ghostscript. It can process all received PostScript (and additionally many other file formats) from clients. All CUPS-PPDs geared to non-PostScript printers contain an additional line, starting with the keyword -*cupsFilter . This line tells the CUPS print +*cupsFilter. This line tells the CUPS print system which printer-specific filter to use for the interpretation of the supplied PostScript. Thus CUPS lets all its printers appear as PostScript devices to its clients, because it can act as a PostScript RIP for those printers, processing the received PostScript code into a proper raster print format. -

    PPDs for non-PS Printers on Windows

    +

    PPDs for Non-PS Printers on Windows

    + CUPS-PPDs can also be used on Windows-Clients, on top of a -"core" PostScript driver (now recommended is the "CUPS PostScript -Driver for WindowsNT/2K/XP"; you can also use the Adobe one, with +“core” PostScript driver (now recommended is the "CUPS PostScript +Driver for WindowsNT/200x/XP"; you can also use the Adobe one, with limitations). This feature enables CUPS to do a few tricks no other spooler can do: -

    • act as a networked PostScript RIP (Raster Image +

      • Act as a networked PostScript RIP (Raster Image Processor), handling printfiles from all client platforms in a uniform -way;

      • act as a central accounting and billing server, since -all files are passed through the pstops filter and are therefore +way.

      • Act as a central accounting and billing server, since +all files are passed through the pstops filter and are, therefore, logged in the CUPS page_log file. -NOTE: this can not happen with "raw" print jobs, -which always remain unfiltered per definition;

      • enable clients to consolidate on a single PostScript +Note: this cannot happen with “raw” print jobs, +which always remain unfiltered per definition.

      • Enable clients to consolidate on a single PostScript driver, even for many different target printers.

      Using CUPS PPDs on Windows clients enables these to control -all print job settings just as a UNIX client can do too. -

    Windows Terminal Servers (WTS) as CUPS Clients

    +all print job settings just as a UNIX client can do. +

    Windows Terminal Servers (WTS) as CUPS Clients

    This setup may be of special interest to people experiencing major -problems in WTS environments. WTS need often a multitude of +problems in WTS environments. WTS often need a multitude of non-PostScript drivers installed to run their clients' variety of different printer models. This often imposes the price of much increased instability. -

    Printer Drivers running in "Kernel Mode" cause many +

    Printer Drivers Running in “Kernel Mode” Cause Many Problems

    -The reason is that in Win NT printer drivers run in "Kernel -Mode", this introduces a high risk for the stability of the system + In Windows NT printer drivers which run in “Kernel +Mode”, introduces a high risk for the stability of the system if the driver is not really stable and well-tested. And there are a lot of bad drivers out there! Especially notorious is the example of the PCL printer driver that had an additional sound module running, to notify users via soundcard of their finished jobs. Do I -need to say that this one was also reliably causing "Blue Screens -of Death" on a regular basis? +need to say that this one was also reliably causing “blue screens +of death” on a regular basis?

    -PostScript drivers generally are very well tested. They are not known -to cause any problems, even though they run in Kernel Mode too. This -might be because there have so far only been 2 different PostScript +PostScript drivers are generally well tested. They are not known +to cause any problems, even though they also run in kernel mode. This +might be because there have been so far only two different PostScript drivers: the ones from Adobe and the one from Microsoft. Both are -very well tested and are as stable as you ever can imagine on +well tested and are as stable as you can imagine on Windows. The CUPS driver is derived from the Microsoft one. -

    Workarounds impose Heavy Limitations

    +

    Workarounds Impose Heavy Limitations

    In many cases, in an attempt to work around this problem, site -administrators have resorted to restrict the allowed drivers installed -on their WTS to one generic PCL- and one PostScript driver. This -however restricts the clients in the amount of printer options -available for them; often they can't get out more than simplex +administrators have resorted to restricting the allowed drivers installed +on their WTS to one generic PCL and one PostScript driver. This, +however, restricts the clients in the number of printer options +available for them. Often they can't get out more than simplex prints from one standard paper tray, while their devices could do much -better, if driven by a different driver! ) -

    CUPS: a "Magical Stone"?

    +better, if driven by a different driver! +

    CUPS: A “Magical Stone”?

    + + Using a PostScript driver, enabled with a CUPS-PPD, seems to be a very elegant way to overcome all these shortcomings. There are, depending -on the version of Windows OS you use, up to 3 different PostScript +on the version of Windows OS you use, up to three different PostScript drivers available: Adobe, Microsoft and CUPS PostScript drivers. None of them is known to cause major stability problems on WTS (even if used with many different PPDs). The clients will be able to (again) chose paper trays, duplex printing and other settings. However, there is a certain price for this too: a CUPS server acting as a PostScript RIP for its clients requires more CPU and RAM than when just acting as -a "raw spooling" device. Plus, this setup is not yet widely tested, +a “raw spooling” device. Plus, this setup is not yet widely tested, although the first feedbacks look very promising. -

    PostScript Drivers with no major problems -- even in Kernel -Mode

    -More recent printer drivers on W2K and XP don't run in Kernel mode -(unlike Win NT) any more. However, both operating systems can still -use the NT drivers, running in Kernel mode (you can roughly tell which -is which as the drivers in subdirectory "2" of "W32X86" are "old" -ones). As was said before, the Adobe as well as the Microsoft +

    PostScript Drivers with No Major Problems Even in Kernel +Mode

    + +More recent printer drivers on W200x and XP no longer run in kernel mode +(unlike Windows NT). However, both operating systems can still +use the NT drivers, running in kernel mode (you can roughly tell which +is which as the drivers in subdirectory “2” of “W32X86” are “old” +ones). As was said before, the Adobe as well as the Microsoft PostScript drivers are not known to cause any stability problems. The CUPS driver is derived from the Microsoft one. There is a simple -reason for this: The MS DDK (Device Development Kit) for Win NT (which +reason for this: The MS DDK (Device Development Kit) for Windows NT (which used to be available at no cost to licensees of Visual Studio) includes the source code of the Microsoft driver, and licensees of Visual Studio are allowed to use and modify it for their own driver development efforts. This is what the CUPS people have done. The -license doesn't allow them to publish the whole of the source code. -However, they have released the "diff" under the GPL, and if you are -owner of an "MS DDK for Win NT", you can check the driver yourself. -

    Setting up CUPS for driver Download

    -As we have said before: all previously known methods to prepare client -printer drivers on the Samba server for download and "Point'n'Print" -convenience of Windows workstations are working with CUPS too. These +license does not allow them to publish the whole of the source code. +However, they have released the “diff” under the GPL, and if you are +the owner of an “MS DDK for Windows NT,” you can check the driver yourself. +

    Configuring CUPS for Driver Download

    +As we have said before, all previously known methods to prepare client +printer drivers on the Samba server for download and Point'n'Print +convenience of Windows workstations are working with CUPS, too. These methods were described in the previous chapter. In reality, this is a -pure Samba business, and only relates to the Samba/Win client +pure Samba business and only relates to the Samba/Windows client relationship. -

    cupsaddsmb: the unknown Utility

    -The cupsaddsmb utility (shipped with all current CUPS versions) is an -alternative method to transfer printer drivers into the Samba +

    cupsaddsmb: The Unknown Utility

    + +The cupsaddsmb utility (shipped with all current CUPS versions) is an +alternate method to transfer printer drivers into the Samba [print$] share. Remember, this share is where clients expect drivers deposited and setup for download and -installation. It makes the sharing of any (or all) installed CUPS -printers very easy. cupsaddsmb can use the Adobe PostScript driver as -well as the newly developed CUPS PostScript Driver for -WinNT/2K/XP. Note, that cupsaddsmb does +installation. It makes the sharing of any (or all) installed CUPS +printers quite easy. cupsaddsmb can use the Adobe PostScript driver as +well as the newly developed CUPS PostScript Driver for +Windows NT/200x/XP. cupsaddsmb does not work with arbitrary vendor printer drivers, but only with the exact driver files that are named in its man page. @@ -1378,23 +1444,24 @@ The CUPS printer driver is available from the CUPS download site. Its package name is cups-samba-[version].tar.gz . It is preferred over the Adobe drivers since it has a number of advantages: -

    • it supports a much more accurate page -accounting;

    • it supports banner pages, and page labels on all -printers;

    • it supports the setting of a number of job IPP +

      • It supports a much more accurate page +accounting.

      • It supports banner pages, and page labels on all +printers.

      • It supports the setting of a number of job IPP attributes (such as job-priority, page-label and -job-billing)

      -However, currently only Windows NT, 2000, and XP are supported by the -CUPS drivers. You will need to get the respective part of Adobe driver -too if you need to support Windows 95, 98, and ME clients. -

    Prepare your smb.conf for cupsaddsmb

    -Prior to running cupsaddsmb, you need the following settings in -smb.conf: -

    Example 19.3. smb.conf for cupsaddsmb usage

    [global]
    load printers = yes
    printing = cups
    printcap name = cups
    [printers]
    comment = All Printers
    path = /var/spool/samba
    browseable = no
    public = yes
    # setting depends on your requirements
    guest ok = yes
    writable = no
    printable = yes
    printer admin = root
    [print$]
    comment = Printer Drivers
    path = /etc/samba/drivers
    browseable = yes
    guest ok = no
    read only = yes
    write list = root

    CUPS Package of "PostScript Driver for WinNT/2k/XP"

    -CUPS users may get the exactly same packages from http://www.cups.org/software.html. +job-billing).

    +However, currently only Windows NT, 2000 and XP are supported by the +CUPS drivers. You will also need to get the respective part of Adobe driver +if you need to support Windows 95, 98 and ME clients. +

    Prepare Your smb.conf for cupsaddsmb

    +Prior to running cupsaddsmb, you need the settings in +smb.conf as shown in : +

    Example 19.3. smb.conf for cupsaddsmb usage

    [global]
    load printers = yes
    printing = cups
    printcap name = cups
    [printers]
    comment = All Printers
    path = /var/spool/samba
    browseable = no
    public = yes
    # setting depends on your requirements
    guest ok = yes
    writable = no
    printable = yes
    printer admin = root
    [print$]
    comment = Printer Drivers
    path = /etc/samba/drivers
    browseable = yes
    guest ok = no
    read only = yes
    write list = root

    CUPS “PostScript Driver for Windows NT/200x/XP

    + +CUPS users may get the exact same packages from http://www.cups.org/software.html. It is a separate package from the CUPS base software files, tagged as -CUPS 1.1.x Windows NT/2k/XP Printer Driver for Samba -(tar.gz, 192k). The filename to download is -cups-samba-1.1.x.tar.gz. Upon untar-/unzip-ing, +CUPS 1.1.x Windows NT/200x/XP Printer Driver for Samba +(tar.gz, 192k). The filename to download is +cups-samba-1.1.x.tar.gz. Upon untar and unzipping, it will reveal these files:

     root# tar xvzf cups-samba-1.1.19.tar.gz
    @@ -1404,15 +1471,15 @@ cups-samba.readme
     cups-samba.remove
     cups-samba.ss
     

    - - + + These have been packaged with the ESP meta packager software -"EPM". The *.install and +EPM. The *.install and *.remove files are simple shell scripts, which untars the *.ss (the *.ss is -nothing else but a tar-archive, which can be untar-ed by "tar" +nothing else but a tar-archive, which can be untarred by “tar” too). Then it puts the content into -/usr/share/cups/drivers/. This content includes 3 +/usr/share/cups/drivers/. This content includes three files:

     root# tar tv cups-samba.ss
    @@ -1420,7 +1487,7 @@ cupsdrvr.dll
     cupsui.dll
     cups.hlp  
     

    -The cups-samba.install shell scripts is easy to +The cups-samba.install shell scripts are easy to handle:

     root# ./cups-samba.install
    @@ -1428,7 +1495,7 @@ handle:
     Installing software...
     Updating file permissions...
     Running post-install commands...
    -Installation is complete.        
    +Installation is complete.       
     

    The script should automatically put the driver files into the /usr/share/cups/drivers/ directory. @@ -1439,206 +1506,210 @@ into/usr/share/drivers/ instead of /usr/share/cups/drivers/. To work around this, copy/move the file (after running the ./cups-samba.install script) manually to the -right place. +correct place.

     root# cp /usr/share/drivers/cups.hlp /usr/share/cups/drivers/
    -

    +

    + This new CUPS PostScript driver is currently binary-only, but free of -charge. No complete source code is provided (yet). The reason is this: -it has been developed with the help of the Microsoft Driver -Developer Kit (DDK) and compiled with Microsoft Visual +charge. No complete source code is provided (yet). The reason is that +it has been developed with the help of the Microsoft Driver +Developer Kit (DDK) and compiled with Microsoft Visual Studio 6. Driver developers are not allowed to distribute the whole of -the source code as Free Software. However, CUPS developers released -the "diff" in source code under the GPL, so anybody with a license of +the source code as free software. However, CUPS developers released +the “diff” in source code under the GPL, so anybody with a license of Visual Studio and a DDK will be able to compile for him/herself. -

    Recognize the different Driver Files

    -The CUPS drivers don't support the "older" Windows 95/98/ME, but only -the Windows NT/2000/XP client: -

    Windows NT, 2000, and XP are supported by:

    -

    • cups.hlp

    • cupsdrvr.dll

    • cupsui.dll

    -

    -Adobe drivers are available for the older Windows 95/98/ME as well as -the Windows NT/2000/XP clients. The set of files is different for the +

    Recognizing Different Driver Files

    +The CUPS drivers do not support the older Windows 95/98/Me, but only +the Windows NT/2000/XP client. +

    Windows NT, 2000 and XP are supported by:

    +

    • cups.hlp
    • cupsdrvr.dll
    • cupsui.dll

    +

    +Adobe drivers are available for the older Windows 95/98/Me as well as +the Windows NT/2000/XP clients. The set of files is different from the different platforms. -

    Windows 95, 98, and Me are supported by:

    -

    • ADFONTS.MFM

    • ADOBEPS4.DRV

    • ADOBEPS4.HLP

    • DEFPRTR2.PPD

    • ICONLIB.DLL

    • PSMON.DLL

    -

    Windows NT, 2000, and XP are supported by:

    -

    • ADOBEPS5.DLL

    • ADOBEPSU.DLL

    • ADOBEPSU.HLP

    +

    Windows 95, 98 and ME are supported by:

    +

    • ADFONTS.MFM
    • ADOBEPS4.DRV
    • ADOBEPS4.HLP
    • DEFPRTR2.PPD
    • ICONLIB.DLL
    • PSMON.DLL

    +

    Windows NT, 2000 and XP are supported by:

    +

    • ADOBEPS5.DLL
    • ADOBEPSU.DLL
    • ADOBEPSU.HLP

    Note

    -If both, the Adobe driver files and the CUPS driver files for the -support of WinNT/2k/XP are present in , the Adobe ones will be ignored -and the CUPS ones will be used. If you prefer -- for whatever reason --- to use Adobe-only drivers, move away the 3 CUPS driver files. The -Win95/98/ME clients use the Adobe drivers in any case. -

    Acquiring the Adobe Driver Files

    +If both the Adobe driver files and the CUPS driver files for the +support of Windows NT/200x/XP are present in FIXME, the Adobe ones will be ignored +and the CUPS ones will be used. If you prefer for whatever reason + to use Adobe-only drivers, move away the three CUPS driver files. The +Windows 9x/Me clients use the Adobe drivers in any case. +

    Acquiring the Adobe Driver Files

    Acquiring the Adobe driver files seems to be unexpectedly difficult -for many users. They are not available on the Adobe website as single -files and the self-extracting and/or self-installing Windows-exe is +for many users. They are not available on the Adobe Web site as single +files and the self-extracting and/or self-installing Windows-.exe is not easy to locate either. Probably you need to use the included native installer and run the installation process on one client once. This will install the drivers (and one Generic PostScript -printer) locally on the client. When they are installed, share the -Generic PostScript printer. After this, the client's +printer) locally on the client. When they are installed, share the +Generic PostScript printer. After this, the client's [print$] share holds the Adobe files, from -where you can get them with smbclient from the CUPS host. A more -detailed description about this is in the next (the CUPS printing) -chapter. -

    ESP Print Pro Package of "PostScript Driver for -WinNT/2k/XP"

    -Users of the ESP Print Pro software are able to install their "Samba -Drivers" package for this purpose with no problem. Retrieve the driver +where you can get them with smbclient from the CUPS host. +

    ESP Print Pro PostScript Driver for Windows NT/200x/XP

    + +Users of the ESP Print Pro software are able to install their Samba +drivers package for this purpose with no problem. Retrieve the driver files from the normal download area of the ESP Print Pro software -at http://www.easysw.com/software.html. -You need to locate the link labelled "SAMBA" amongst the -Download Printer Drivers for ESP Print Pro 4.x +at http://www.easysw.com/software.html. +You need to locate the link labelled “SAMBA” among the +Download Printer Drivers for ESP Print Pro 4.x area and download the package. Once installed, you can prepare any driver by simply highlighting the printer in the Printer Manager GUI -and select Export Driver... from the menu. Of -course you need to have prepared Samba beforehand too to handle the -driver files; i.e. mainly setup the [print$] -share, etc. The ESP Print Pro package includes the CUPS driver files -as well as a (licensed) set of Adobe drivers for the Windows 95/98/ME +and select Export Driver... from the menu. Of +course you need to have prepared Samba beforehand to handle the +driver files; i.e., setup the [print$] +share, and so on. The ESP Print Pro package includes the CUPS driver files +as well as a (licensed) set of Adobe drivers for the Windows 95/98/Me client family. -

    Caveats to be considered

    +

    Caveats to be Considered

    + Once you have run the install script (and possibly manually moved the cups.hlp file to /usr/share/cups/drivers/), the driver is ready to be put into Samba's [print$] share (which often maps to -/etc/samba/drivers/ and contains a subdir +/etc/samba/drivers/ and contains a subdirectory tree with WIN40 and -W32X86 branches): You do this by running -"cupsaddsmb" (see also man cupsaddsmb for +W32X86 branches). You do this by running +cupsaddsmb (see also man cupsaddsmb for CUPS since release 1.1.16).

    Tip

    - + You may need to put root into the smbpasswd file by running smbpasswd; this is especially important if you should run this whole procedure for the first time, and are not working in an environment where everything is configured for -Single Sign On to a Windows Domain Controller. +single sign on to a Windows Domain Controller.

    Once the driver files are in the [print$] share and are initialized, they are ready to be downloaded and installed by -the Win NT/2k/XP clients. +the Windows NT/200x/XP clients.

    Note

    -

    1. -Win 9x/ME clients won't work with the CUPS PostScript driver. For -these you'd still need to use the ADOBE*.* -drivers as previously. -

    2. +Win 9x/Me clients will not work with the CUPS PostScript driver. For +these you still need to use the ADOBE*.* +drivers as previously stated. +

    Note

    It is not harmful if you still have the ADOBE*.* driver files from previous installations in the /usr/share/cups/drivers/ -directory. The new cupsaddsmb (from 1.1.16) will -automatically prefer "its own" drivers if it finds both. -

  • - -Should your Win clients have had the old ADOBE*.* +directory. The new cupsaddsmb (from 1.1.16) will +automatically prefer its own drivers if it finds both. +

  • Note

    + +Should your Windows clients have had the old ADOBE*.* files for the Adobe PostScript driver installed, the download and -installation of the new CUPS PostScript driver for Windows NT/2k/XP +installation of the new CUPS PostScript driver for Windows NT/200x/XP will fail at first. You need to wipe the old driver from the clients -first. It is not enough to "delete" the printer, as the driver files +first. It is not enough to “delete” the printer, as the driver files will still be kept by the clients and re-used if you try to re-install the printer. To really get rid of the Adobe driver files on the -clients, open the "Printers" folder (possibly via Start, Settings, Control Panel, Printers), -right-click onto the folder background and select Server -Properties. When the new dialog opens, select the -Drivers tab. On the list select the driver you -want to delete and click on the Delete +clients, open the Printers folder (possibly via Start > Settings > Control Panel > Printers), +right-click on the folder background and select Server +Properties. When the new dialog opens, select the +Drivers tab. On the list select the driver you +want to delete and click the Delete button. This will only work if there is not one single printer left -which uses that particular driver. You need to "delete" all printers -using this driver in the "Printers" folder first. You will need +that uses that particular driver. You need to “delete” all printers +using this driver in the Printers folder first. You will need Administrator privileges to do this. -

  • - +

  • Note

    + Once you have successfully downloaded the CUPS PostScript driver to a client, you can easily switch all printers to this one by proceeding -as described in the printing chapter: either change -a driver for an existing printer by running the "Printer Properties" +as described in . Either change +a driver for an existing printer by running the Printer Properties dialog, or use rpcclient with the -setdriver sub-command. -

    -

    Benefits of using "CUPS PostScript Driver for -Windows NT/2k/XP" instead of Adobe Driver

    -You are interested in a comparison between the CUPS and the Adobe +setdriver subcommand. +

    Windows CUPS PostScript Driver Versus Adobe Driver

    +Are you interested in a comparison between the CUPS and the Adobe PostScript drivers? For our purposes these are the most important -items which weigh in favor of the CUPS ones: -

    • no hassle with the Adobe EULA

    • no hassle with the question “Where do I +items that weigh in favor of the CUPS ones: +

      • No hassle with the Adobe EULA.

      • No hassle with the question “Where do I get the ADOBE*.* driver files from?

      • - - the Adobe drivers (on request of the printer PPD + +The Adobe drivers (on request of the printer PPD associated with them) often put a PJL header in front of the main -PostScript part of the print file. Thus the printfile starts with +PostScript part of the print file. Thus, the printfile starts with <1B >%-12345X or <escape>%-12345X instead of %!PS). This leads to the CUPS daemon auto-typing the incoming file as a print-ready file, -not initiating a pass through the "pstops" filter (to speak more -technically, it is not regarded as the generic MIME type - -application/postscript, but as +not initiating a pass through the pstops filter (to speak more +technically, it is not regarded as the generic MIME-type + +application/postscript, but as the more special MIME type - -application/cups.vnd-postscript), + +application/cups.vnd-postscript), which therefore also leads to the page accounting in -/var/log/cups/page_log not +/var/log/cups/page_log not receiving the exact number of pages; instead the dummy page number -of "1" is logged in a standard setup)

      • the Adobe driver has more options to "mis-configure" the +of “1” is logged in a standard setup).

      • The Adobe driver has more options to misconfigure the PostScript generated by it (like setting it inadvertently to -Optimize for Speed, instead of -Optimize for Portability, which -could lead to CUPS being unable to process it)

      • the CUPS PostScript driver output sent by Windows -clients to the CUPS server will be guaranteed to be auto-typed always -as generic MIME type application/postscript, -thusly passing through the CUPS "pstops" filter and logging the +Optimize for Speed, instead of +Optimize for Portability, which +could lead to CUPS being unable to process it).

      • The CUPS PostScript driver output sent by Windows +clients to the CUPS server is guaranteed to auto-type +as the generic MIME type application/postscript, +thus passing through the CUPS pstops filter and logging the correct number of pages in the page_log for -accounting and quota purposes

      • the CUPS PostScript driver supports the sending of -additional standard (IPP) print options by Win NT/2k/XP clients. Such +accounting and quota purposes.

      • The CUPS PostScript driver supports the sending of +additional standard (IPP) print options by Windows NT/200x/XP clients. Such additional print options are: naming the CUPS standard banner pages (or the custom ones, should they be installed at the time of driver download), using the CUPS -page-label option, setting a -job-priority and setting the scheduled -time of printing (with the option to support additional -useful IPP job attributes in the future).

      • the CUPS PostScript driver supports the inclusion of -the new *cupsJobTicket comments at the +page-label option, setting a +job-priority, and setting the scheduled +time of printing (with the option to support additional +useful IPP job attributes in the future).

      • The CUPS PostScript driver supports the inclusion of +the new *cupsJobTicket comments at the beginning of the PostScript file (which could be used in the future for all sort of beneficial extensions on the CUPS side, but which will not disturb any other applications as they will regard it as a comment -and simply ignore it).

      • the CUPS PostScript driver will be the heart of the -fully fledged CUPS IPP client for Windows NT/2K/XP to be released soon -(probably alongside the first Beta release for CUPS -1.2).

    Run "cupsaddsmb" (quiet Mode)

    -The cupsaddsmb command copies the needed files into your +and simply ignore it).

  • The CUPS PostScript driver will be the heart of the +fully fledged CUPS IPP client for Windows NT/200x/XP to be released soon +(probably alongside the first beta release for CUPS +1.2).

  • Run cupsaddsmb (Quiet Mode)

    + + +The cupsaddsmb command copies the needed files into your [print$] share. Additionally, the PPD associated with this printer is copied from /etc/cups/ppd/ to [print$]. There the files wait for convenient Windows client installations via Point'n'Print. Before we can run the command successfully, we need to be sure that we can authenticate -towards Samba. If you have a small network you are probably using user -level security (security = user). +toward Samba. If you have a small network, you are probably using user-level +security (security = user).

    -Here is an example of a successfully run cupsaddsmb command. +Here is an example of a successfully run cupsaddsmb command:

     root# cupsaddsmb -U root infotec_IS2027
     Password for root required to access localhost via Samba: ['secret']
     

    To share all printers and drivers, use the -a parameter instead of a printer name. Since -cupsaddsmb "exports" the printer drivers to Samba, it should be +cupsaddsmbexports” the printer drivers to Samba, it should be obvious that it only works for queues with a CUPS driver associated. -

    Run "cupsaddsmb" with verbose Output

    +

    Run cupsaddsmb with Verbose Output

    + Probably you want to see what's going on. Use the -v parameter to get a more verbose output. The -output below was edited for better readability: all "\" at the end of +output below was edited for better readability: all “\” at the end of a line indicate that I inserted an artificial line break plus some indentation here:

    Warning

    You will see the root password for the Samba account printed on screen. -

    +

    + + + +

     root# cupsaddsmb -U root -v infotec_2105
     Password for root required to access localhost via GANDALF:
     Running command: smbclient //localhost/print\$ -N -U'root%secret' \
    @@ -1656,11 +1727,12 @@ putting file /usr/share/cups/drivers/cupsui.dll as \W32X86/cupsui.dll
     putting file /usr/share/cups/drivers/cups.hlp as \W32X86/cups.hlp
       
     Running command: rpcclient localhost -N -U'root%secret' 
    -   -c 'adddriver "Windows NT x86"   \
    -   "infotec_2105:cupsdrvr.dll:infotec_2105.ppd:cupsui.dll:cups.hlp:NULL:   \
    -    RAW:NULL"'
    -cmd = adddriver "Windows NT x86" \
    -    "infotec_2105:cupsdrvr.dll:infotec_2105.ppd:cupsui.dll:cups.hlp:NULL:RAW:NULL"
    +   -c 'adddriver "Windows NT x86"   \
    +   "infotec_2105:cupsdrvr.dll:infotec_2105.ppd:cupsui.dll:cups.hlp:NULL: \
    +    RAW:NULL"'
    +cmd = adddriver "Windows NT x86" \
    +   "infotec_2105:cupsdrvr.dll:infotec_2105.ppd:cupsui.dll:cups.hlp:NULL: \
    +	RAW:NULL"
     Printer Driver infotec_2105 successfully installed.
       
     Running command: smbclient //localhost/print\$ -N -U'root%secret' \
    @@ -1684,13 +1756,14 @@ Running command: smbclient //localhost/print\$ -N -U'root%secret' \
       putting file /usr/share/cups/drivers/PSMON.DLL as \WIN40/PSMON.DLL
       
       Running command: rpcclient localhost -N -U'root%secret' \
    -   -c 'adddriver "Windows 4.0"      \
    -   "infotec_2105:ADOBEPS4.DRV:infotec_2105.PPD:NULL:ADOBEPS4.HLP: \
    +   -c 'adddriver "Windows 4.0"      \
    +   "infotec_2105:ADOBEPS4.DRV:infotec_2105.PPD:NULL:ADOBEPS4.HLP: \
        PSMON.DLL:RAW:ADOBEPS4.DRV,infotec_2105.PPD,ADOBEPS4.HLP,PSMON.DLL, \
    -    ADFONTS.MFM,DEFPRTR2.PPD,ICONLIB.DLL"'
    -  cmd = adddriver "Windows 4.0" "infotec_2105:ADOBEPS4.DRV:infotec_2105.PPD:NULL:          \
    -    ADOBEPS4.HLP:PSMON.DLL:RAW:ADOBEPS4.DRV,infotec_2105.PPD,ADOBEPS4.HLP,  \
    -                   PSMON.DLL,ADFONTS.MFM,DEFPRTR2.PPD,ICONLIB.DLL"
    +    ADFONTS.MFM,DEFPRTR2.PPD,ICONLIB.DLL"'
    +	cmd = adddriver "Windows 4.0" "infotec_2105:ADOBEPS4.DRV:\
    +	infotec_2105.PPD:NULL:ADOBEPS4.HLP:PSMON.DLL:RAW:ADOBEPS4.DRV,\
    +	infotec_2105.PPD,ADOBEPS4.HLP,PSMON.DLL,ADFONTS.MFM,DEFPRTR2.PPD,\
    +	ICONLIB.DLL"
       Printer Driver infotec_2105 successfully installed.
       
       Running command: rpcclient localhost -N -U'root%secret'  \
    @@ -1700,62 +1773,60 @@ Running command: smbclient //localhost/print\$ -N -U'root%secret' \
     
     

    If you look closely, you'll discover your root password was transferred -unencrypted over the wire, so beware! Also, if you look further her, -you'll discover error messages like NT_STATUS_OBJECT_NAME_COLLISION in -between. They occur, because the directories WIN40 and W32X86 already -existed in the [print$] driver download share -(from a previous driver installation). They are harmless here. -

    Understanding cupsaddsmb

    -What has happened? What did cupsaddsmb do? There are five stages of -the procedure +unencrypted over the wire, so beware! Also, if you look further, +you'll discover error messages like NT_STATUS_OBJECT_NAME_COLLISION in between. They occur, because the directories WIN40 and W32X86 already existed in the [print$] driver download share (from a previous driver installation). They are harmless here. +

    Understanding cupsaddsmb

    + +What has happened? What did cupsaddsmb do? There are five stages of +the procedure:

    1. - - call the CUPS server via IPP and request the -driver files and the PPD file for the named printer;

    2. store the files temporarily in the local + + Call the CUPS server via IPP and request the +driver files and the PPD file for the named printer.

    3. Store the files temporarily in the local TEMPDIR (as defined in -cupsd.conf);

    4. connect via smbclient to the Samba server's +cupsd.conf).

    5. Connect via smbclient to the Samba server's [print$] share and put the files into the - share's WIN40 (for Win95/98/ME) and W32X86/ (for WinNT/2k/XP) sub - directories;

    6. - - connect via rpcclient to the Samba server and -execute the "adddriver" command with the correct -parameters;

    7. - - connect via rpcclient to the Samba server a second -time and execute the "setdriver" command.

    -Note, that you can run the cupsaddsmb utility with parameters to + share's WIN40 (for Windows 9x/Me) and W32X86/ (for Windows NT/200x/XP) subdirectories.

  • + + Connect via rpcclient to the Samba server and +execute the adddriver command with the correct +parameters.

  • + + Connect via rpcclient to the Samba server a second +time and execute the setdriver command.

  • Note

    +You can run the cupsaddsmb utility with parameters to specify one remote host as Samba host and a second remote host as CUPS host. Especially if you want to get a deeper understanding, it is a -good idea try it and see more clearly what is going on (though in real +good idea to try it and see more clearly what is going on (though in real life most people will have their CUPS and Samba servers run on the same host):

    -root# cupsaddsmb -H sambaserver -h cupsserver -v printername
    -

    How to recognize if cupsaddsmb completed successfully

    +root# cupsaddsmb -H sambaserver -h cupsserver -v printer +

    How to Recognize If cupsaddsmb Completed Successfully

    You must always check if the utility completed -successfully in all fields. You need as a minimum these 3 messages -amongst the output: +successfully in all fields. You need as a minimum these three messages +among the output:

    1. Printer Driver infotec_2105 successfully -installed. # (for the W32X86 == WinNT/2K/XP -architecture...)

    2. Printer Driver infotec_2105 successfully -installed. # (for the WIN40 == Win9x/ME -architecture...)

    3. Successfully set [printerXPZ] to driver +installed. # (for the W32X86 == Windows NT/200x/XP +architecture).

    4. Printer Driver infotec_2105 successfully +installed. # (for the WIN40 == Windows 9x/Me +architecture).

    5. Successfully set [printerXPZ] to driver [printerXYZ].

    -These messages probably not easily recognized in the general -output. If you run cupsaddsmb with the -a +These messages are probably not easily recognized in the general +output. If you run cupsaddsmb with the -a parameter (which tries to prepare all active CUPS printer drivers for download), you might miss if individual printers -drivers had problems to install properly. Here a redirection of the +drivers had problems installing properly. Here a redirection of the output will help you analyze the results in retrospective.

    Note

    -It is impossible to see any diagnostic output if you don't run -cupsaddsmb in verbose mode. Therefore we strongly recommend to not -use the default quiet mode. It will hide any problems from you which +It is impossible to see any diagnostic output if you do not run +cupsaddsmb in verbose mode. Therefore, we strongly recommend to not +use the default quiet mode. It will hide any problems from you that might occur. -

    cupsaddsmb with a Samba PDC

    -You can't get the standard cupsaddsmb command to run on a Samba PDC? -You are asked for the password credential all over again and again and +

    cupsaddsmb with a Samba PDC

    + +Can't get the standard cupsaddsmb command to run on a Samba PDC? +Are you asked for the password credential all over again and again and the command just will not take off at all? Try one of these variations:

    @@ -1764,114 +1835,116 @@ variations:
     root# cupsaddsmb -H SAURON -U MIDEARTH\\root -h cups-server -v printername
     

    (Note the two backslashes: the first one is required to -"escape" the second one). -

    cupsaddsmb Flowchart

    -Here is a chart about the procedures, commandflows and -dataflows of the "cupaddsmb" command. Note again: cupsaddsmb is -not intended to, and does not work with, "raw" queues! -

    -

    Figure 19.16. cupsaddsmb flowchart

    cupsaddsmb flowchart

    -

    Installing the PostScript Driver on a Client

    -After cupsaddsmb completed, your driver is prepared for the clients to +“escape” the second one). +

    cupsaddsmb Flowchart

    + + shows a chart about the procedures, commandflows and +dataflows of the cupaddsmb command. Note again: cupsaddsmb is +not intended to, and does not work with, raw queues! +

    +

    Figure 19.16. cupsaddsmb flowchart.

    cupsaddsmb flowchart.

    +

    Installing the PostScript Driver on a Client

    + +After cupsaddsmb is completed, your driver is prepared for the clients to use. Here are the steps you must perform to download and install it -via "Point'n'Print". From a Windows client, browse to the CUPS/Samba -server; -

    • open the Printers -share of Samba in Network Neighbourhood;

    • right-click on the printer in -question;

    • from the opening context-menu select -Install... or -Connect... (depending on the Windows version you +via Point'n'Print. From a Windows client, browse to the CUPS/Samba +server: +

      • + +Open the Printers +share of Samba in Network Neighborhood.

      • Right-click on the printer in +question.

      • From the opening context-menu select +Install... or +Connect... (depending on the Windows version you use).

      After a few seconds, there should be a new printer in your -client's local "Printers" folder: On Windows +client's local Printers folder. On Windows XP it will follow a naming convention of PrinterName on -SambaServer. (In my current case it is "infotec_2105 on -kde-bitshop"). If you want to test it and send your first job from -an application like Winword, the new printer will appears in a +SambaServer. (In my current case it is "infotec_2105 on +kde-bitshop"). If you want to test it and send your first job from +an application like Winword, the new printer appears in a \\SambaServer\PrinterName entry in the -dropdown list of available printers. -

      Note

      - -cupsaddsmb will only reliably work with CUPS version 1.1.15 or higher -and Samba from 2.2.4. If it doesn't work, or if the automatic printer -driver download to the clients doesn't succeed, you can still manually +drop-down list of available printers. +

      + +cupsaddsmb will only reliably work with CUPS version 1.1.15 or higher +and Samba from 2.2.4. If it does not work, or if the automatic printer +driver download to the clients does not succeed, you can still manually install the CUPS printer PPD on top of the Adobe PostScript driver on clients. Then point the client's printer queue to the Samba printer share for a UNC type of connection: -

      +

       C:\> net use lpt1: \\sambaserver\printershare /user:ntadmin
       

      should you desire to use the CUPS networked PostScript RIP -functions. (Note that user "ntadmin" needs to be a valid Samba user -with the required privileges to access the printershare) This would -set up the printer connection in the traditional +functions. (Note that user “ntadmin” needs to be a valid Samba user +with the required privileges to access the printershare.) This +sets up the printer connection in the traditional LanMan way (not using MS-RPC). -

    Avoiding critical PostScript Driver Settings on the -Client

    -Soooo: printing works, but there are still problems. Most jobs print -well, some don't print at all. Some jobs have problems with fonts, -which don't look very good. Some jobs print fast, and some are +

    Avoiding Critical PostScript Driver Settings on the Client

    +Printing works, but there are still problems. Most jobs print +well, some do not print at all. Some jobs have problems with fonts, +which do not look very good. Some jobs print fast and some are dead-slow. Many of these problems can be greatly reduced or even completely eliminated if you follow a few guidelines. Remember, if your print device is not PostScript-enabled, you are treating your Ghostscript installation on your CUPS host with the output your client driver settings produce. Treat it well: -

    • Avoid the PostScript Output Option: Optimize -for Speed setting. Rather use the Optimize for -Portability instead (Adobe PostScript -driver).

    • Don't use the Page Independence: -NO setting. Instead use Page Independence -YES (CUPS PostScript Driver)

    • Recommended is the True Type Font -Downloading Option: Native True Type over -Automatic and Outline; you -should by all means avoid Bitmap (Adobe -PostScript Driver)

    • Choose True Type Font: Download as Softfont -into Printer over the default Replace by Device -Font (for exotic fonts you may need to change it back to -get a printout at all) (Adobe)

    • Sometimes you can choose PostScript Language -Level: in case of problems try 2 -instead of 3 (the latest ESP Ghostscript package -handles Level 3 PostScript very well) (Adobe).

    • Say Yes to PostScript -Error Handler (Adobe)

    Installing PostScript Driver Files manually (using -rpcclient)

    -Of course you can run all the commands which are embedded into the +

    • Avoid the PostScript Output Option: Optimize +for Speed setting. Use the Optimize for +Portability instead (Adobe PostScript +driver).

    • Don't use the Page Independence: +NO setting. Instead, use Page Independence +YES (CUPS PostScript Driver).

    • Recommended is the True Type Font +Downloading Option: Native True Type over +Automatic and Outline; you +should by all means avoid Bitmap (Adobe +PostScript Driver).

    • Choose True Type Font: Download as Softfont +into Printer over the default Replace by Device +Font (for exotic fonts, you may need to change it back to +get a printout at all) (Adobe).

    • Sometimes you can choose PostScript Language +Level: In case of problems try 2 +instead of 3 (the latest ESP Ghostscript package +handles Level 3 PostScript very well) (Adobe).

    • Say Yes to PostScript +Error Handler (Adobe).

    Installing PostScript Driver Files Manually Using rpcclient

    +Of course, you can run all the commands that are embedded into the cupsaddsmb convenience utility yourself, one by one, and hereby upload and prepare the driver files for future client downloads. -

    1. prepare Samba (a CUPS printqueue with the name of the +

      1. Prepare Samba (A CUPS print queue with the name of the printer should be there. We are providing the driver -now);

      2. copy all files to - [print$]

      3. - - run rpcclient adddriver -(for each client architecture you want to support):

      4. - - run rpcclient +now).

      5. Copy all files to + [print$].

      6. + +Run rpcclient adddriver +(for each client architecture you want to support).

      7. + +Run rpcclient setdriver.

      - - - - - -We are going to do this now. First, read the man page on "rpcclient" + + + + + +We are going to do this now. First, read the man page on rpcclient to get a first idea. Look at all the printing related -sub-commands. enumprinters, +subcommands. enumprinters, enumdrivers, enumports, -adddriver, setdriver are amongst -the most interesting ones. rpcclient implements an important part of -the MS-RPC protocol. You can use it to query (and command) a Win NT -(or 2K/XP) PC too. MS-RPC is used by Windows clients, amongst other -things, to benefit from the "Point'n'Print" features. Samba can now -mimic this too. -

      A Check of the rpcclient man Page

      -First let's have a little check of the rpcclient man page. Here are +adddriver, setdriver are among +the most interesting ones. rpcclient implements an important part of +the MS-RPC protocol. You can use it to query (and command) a Windows NT +(or 200x/XP) PC, too. MS-RPC is used by Windows clients, among other +things, to benefit from the Point'n'Print features. Samba can now +mimic this as well. +

      A Check of the rpcclient man Page

      + First let's check the rpcclient man page. Here are two relevant passages:

      adddriver <arch> <config> Execute an -AddPrinterDriver() RPC to install the printer driver information on -the server. Note that the driver files should already exist in the -directory returned by getdriverdir. Possible +AddPrinterDriver() RPC to install the printer driver information on +the server. The driver files should already exist in the +directory returned by getdriverdir. Possible values for arch are the same as those for the -getdriverdir command. The +getdriverdir command. The config parameter is defined as follows:

       Long Printer Name:\
      @@ -1882,70 +1955,72 @@ Help File Name:\
       Language Monitor Name:\
       Default Data Type:\
       Comma Separated list of Files
      -

      Any empty fields should be enter as the string "NULL".

      Samba does not need to support the concept of Print Monitors +

      Any empty fields should be enter as the string “NULL”.

      Samba does not need to support the concept of Print Monitors since these only apply to local printers whose driver can make use of -a bi-directional link for communication. This field should be "NULL". +a bi-directional link for communication. This field should be “NULL”. On a remote NT print server, the Print Monitor for a driver must already be installed prior to adding the driver or else the RPC will -fail +fail.

      setdriver <printername> <drivername> Execute a SetPrinter() command to update the printer driver associated with an installed printer. The printer driver must already be correctly installed on the print server. -

      See also the enumprinters and enumdrivers commands for +

      See also the enumprinters and enumdrivers commands for obtaining a list of installed printers and drivers. -

      Understanding the rpcclient man page

      +

      Understanding the rpcclient man Page

      The exact format isn't made too clear by the man page, since you have to deal with some parameters containing spaces. Here is a better description for it. We have line-broken the -command and indicated the breaks with "\". Usually you would type the +command and indicated the breaks with “\”. Usually you would type the command in one line without the linebreaks: -

      - adddriver "Architecture" \
      -           "LongPrinterName:DriverFile:DataFile:ConfigFile:HelpFile:\
      -           LanguageMonitorFile:DataType:ListOfFiles,Comma-separated"
      +
      +

      + adddriver "Architecture" \
      +           "LongPrinterName:DriverFile:DataFile:ConfigFile:HelpFile:\
      +           LanguageMonitorFile:DataType:ListOfFiles,Comma-separated"
       

      -What the man pages denotes as a simple <config> -keyword, does in reality consist of 8 colon-separated fields. The -last field may take multiple (in some, very insane, cases, even -20 different additional files. This might sound confusing at first. -Note, that what the man pages names the "LongPrinterName" in -reality should rather be called the "Driver Name". You can name it +What the man pages denote as a simple <config> +keyword, in reality consists of eight colon-separated fields. The +last field may take multiple (in some very insane cases, even +20 different additional) files. This might sound confusing at first. +What the man pages names the “LongPrinterName” in +reality should be called the “Driver Name”. You can name it anything you want, as long as you use this name later in the -rpcclient ... setdriver command. For +rpcclient ... setdriver command. For practical reasons, many name the driver the same as the printer.

      -True: it isn't simple at all. I hear you asking: -How do I know which files are "Driver -File", "Data File", "Config File", "Help File" and "Language -Monitor File" in each case? -- For an answer you may +It isn't simple at all. I hear you asking: +“How do I know which files are "Driver +File”, “Data File”, “Config File”, “Help File” and “Language +Monitor File" in each case?” For an answer, you may want to have a look at how a Windows NT box with a shared printer presents the files to us. Remember, that this whole procedure has -to be developed by the Samba Team by overhearing the traffic caused +to be developed by the Samba team by overhearing the traffic caused by Windows computers on the wire. We may as well turn to a Windows -box now, and access it from a UNIX workstation. We will query it +box now and access it from a UNIX workstation. We will query it with rpcclient to see what it tells us and -try to understand the man page more clearly which we've read just +try to understand the man page more clearly that we've read just now. -

      Producing an Example by querying a Windows Box

      - - +

      Producing an Example by Querying a Windows Box

      + + We could run rpcclient with a getdriver or a getprinter -subcommand (in level 3 verbosity) against it. Just sit down at UNIX or -Linux workstation with the Samba utilities installed. Then type the +subcommand (in level 3 verbosity) against it. Just sit down at a UNIX or +Linux workstation with the Samba utilities installed, then type the following command:

      -root# rpcclient -U'USERNAME%PASSWORD' NT-SERVER-NAME -c 'getdriver printername 3'
      +root# rpcclient -U'user%secret' NT-SERVER -c 'getdriver printername 3'
       

      -From the result it should become clear which is which. Here is an -example from my installation: -

      -root# rpcclient -U'Danka%xxxx' W2KSERVER \
      -	-c'getdriver "DANKA InfoStream Virtual Printer" 3'
      - cmd = getdriver "DANKA InfoStream Virtual Printer" 3
      +From the result it should become clear which is which. Here is an example from my installation:
      +

      + +

      +root# rpcclient -U'Danka%xxxx' W200xSERVER \
      +	-c'getdriver "DANKA InfoStream Virtual Printer" 3'
      + cmd = getdriver "DANKA InfoStream Virtual Printer" 3
       
        [Windows NT x86]
        Printer Driver Info 3:
      @@ -1970,77 +2045,82 @@ example from my installation:
       
       

      Some printer drivers list additional files under the label -"Dependentfiles": these would go into the last field -ListOfFiles,Comma-separated. For the CUPS -PostScript drivers we don't need any (nor would we for the Adobe -PostScript driver): therefore the field will get a "NULL" entry. -

      What is required for adddriver and setdriver to succeed

      -From the manpage (and from the quoted output -of cupsaddsmb, above) it becomes clear that you +Dependentfiles and these would go into the last field +ListOfFiles,Comma-separated. For the CUPS +PostScript drivers, we do not need any (nor would we for the Adobe +PostScript driver), therefore, the field will get a “NULL” entry. +

      Requirements for adddriver and setdriver to Succeed

      +>From the man page (and from the quoted output +of cupsaddsmb above) it becomes clear that you need to have certain conditions in order to make the manual uploading -and initializing of the driver files succeed. The two rpcclient - +and initializing of the driver files succeed. The two rpcclient + subcommands (adddriver and setdriver) need to encounter the following -pre-conditions to complete successfully: -

      • you are connected as printer admin, or root (note, -that this is not the "Printer Operators" group in -NT, but the printer admin group, as defined in +preconditions to complete successfully: +

        • You are connected as printer admin or root (this is not the “Printer Operators” group in +NT, but the printer admin group as defined in the [global] section of -smb.conf);

        • copy all required driver files to -\\sambaserver\print$\w32x86 and -\\sambaserver\print$\win40 as appropriate. They -will end up in the "0" respective "2" subdirectories later -- for now -don't put them there, they'll be automatically -used by the adddriver subcommand.! (if you use -"smbclient" to put the driver files into the share, note that you need -to escape the "$": smbclient //sambaserver/print\$ -U -root);

        • the user you're connecting as must be able to write to +smb.conf).

        • Copy all required driver files to +\\SAMBA\print$\w32x86 and +\\SAMBA\print$\win40 as appropriate. They +will end up in the “0” respective “2” subdirectories later. For now, +do not put them there, they'll be automatically +used by the adddriver subcommand. (If you use +smbclient to put the driver files into the share, note that you need +to escape the “$”: smbclient //sambaserver/print\$ -U +root.)

        • The user you're connecting as must be able to write to the [print$] share and create -subdirectories;

        • the printer you are going to setup for the Windows -clients, needs to be installed in CUPS already;

        • - - - the CUPS printer must be known to Samba, otherwise the +subdirectories.

        • The printer you are going to setup for the Windows +clients needs to be installed in CUPS already.

        • + + + The CUPS printer must be known to Samba, otherwise the setdriver subcommand fails with an NT_STATUS_UNSUCCESSFUL error. To check if the printer is known by -Samba you may use the enumprinters subcommand to -rpcclient. A long-standing bug prevented a proper update of the +Samba, you may use the enumprinters subcommand to +rpcclient. A long-standing bug prevented a proper update of the printer list until every smbd process had received a SIGHUP or was restarted. Remember this in case you've created the CUPS printer just -shortly ago and encounter problems: try restarting -Samba.

      Manual Driver Installation in 15 Steps

      +recently and encounter problems: try restarting +Samba.

    Manual Driver Installation in 15 Steps

    We are going to install a printer driver now by manually executing all required commands. As this may seem a rather complicated process at first, we go through the procedure step by step, explaining every single action item as it comes up. -

    Procedure 19.1. Manual Driver Installation installation

    1. Install the Printer on CUPS

      -root# lpadmin -p mysmbtstprn -v socket://10.160.51.131:9100 -E -P canonIR85.ppd
      +

      Procedure 19.1. Manual Driver Installation

      1. Install the printer on CUPS.

        +root# lpadmin -p mysmbtstprn -v socket://10.160.51.131:9100 -E \
        +			-P canonIR85.ppd
         

        -This installs printer with the name mysmbtstprn +This installs a printer with the name mysmbtstprn to the CUPS system. The printer is accessed via a socket (a.k.a. JetDirect or Direct TCP/IP) connection. You need to be root -for this step -

      2. (optional) Check if the Printer is recognized by -Samba

        -root# rpcclient -Uroot%xxxx -c 'enumprinters' localhost | grep -C2 mysmbtstprn
        +for this step.
        +

      3. (Optional) Check if the printer is recognized by Samba.

        + +

        +	root# rpcclient -Uroot%xxxx -c 'enumprinters' localhost \
        +  | grep -C2 mysmbtstprn
         flags:[0x800000]
         name:[\\kde-bitshop\mysmbtstprn]
         description:[\\kde-bitshop\mysmbtstprn,,mysmbtstprn]
         comment:[mysmbtstprn]
         

        -This should show the printer in the list. If not, stop and re-start -the Samba daemon (smbd), or send a HUP signal: kill -HUP -`pidof smbd`. Check again. Troubleshoot and repeat until -success. Note the "empty" field between the two commas in the -"description" line. Here would the driver name appear if there was one -already. You need to know root's Samba password (as set by the +This should show the printer in the list. If not, stop and restart +the Samba daemon (smbd), or send a HUP signal: +

        +root# kill -HUP `pidof smbd`
        +

        Check again. Troubleshoot and repeat until +successful. Note the “empty” field between the two commas in the +“description” line. The driver name would appear here if there was one already. You need to know root's Samba password (as set by the smbpasswd command) for this step and most of the -following steps. Alternatively you can authenticate as one of the -users from the "write list" as defined in smb.conf for +following steps. Alternately, you can authenticate as one of the +users from the “write list” as defined in smb.conf for [print$]. -

      4. (optional) Check if Samba knows a Driver for the -Printer

        +

      5. (Optional) Check if Samba knows a driver for the printer.

        + + +

         root# rpcclient -Uroot%xxxx -c 'getprinter mysmbtstprn 2' localhost \
         			| grep driver 
         drivername:[]
        @@ -2061,13 +2141,13 @@ printprocessor:[winprint]
          result was WERR_UNKNOWN_PRINTER_DRIVER
         
         

        -Neither method of the three commands shown above should show a driver. +None of the three commands shown above should show a driver. This step was done for the purpose of demonstrating this condition. An attempt to connect to the printer at this stage will prompt the -message along the lines: "The server has not the required printer -driver installed". -

      6. Put all required Driver Files into Samba's -[print$]

        +message along the lines of: “The server does not have the required printer
        +driver installed.”
        +

      7. Put all required driver files into Samba's +[print$].

         root# smbclient //localhost/print\$ -U 'root%xxxx' \
         	-c 'cd W32X86; \
         	put /etc/cups/ppd/mysmbtstprn.ppd mysmbtstprn.PPD; \ 
        @@ -2075,15 +2155,15 @@ driver installed".
         	put /usr/share/cups/drivers/cupsdrvr.dll cupsdrvr.dll; \
         	put /usr/share/cups/drivers/cups.hlp cups.hlp'
         

        -(Note that this command should be entered in one long single -line. Line-breaks and the line-end indicating "\" has been inserted +(This command should be entered in one long single +line. Line-breaks and the line-end indicated by “\” have been inserted for readability reasons.) This step is required for the next one to succeed. It makes the driver files physically present in the [print$] share. However, clients would still not be able to install them, because Samba does not yet treat them as driver files. A client asking for the driver would still -be presented with a "not installed here" message. -

      8. Verify where the Driver Files are now

        +be presented with a “not installed here” message.
        +

      9. Verify where the driver files are now.

         root# ls -l /etc/samba/drivers/W32X86/
         total 669
         drwxr-sr-x    2 root     ntadmin       532 May 25 23:08 2
        @@ -2093,27 +2173,27 @@ drwxr-sr-x    2 root     ntadmin       670 May 16 03:15 3
         -rwxr--r--    1 root     ntadmin    215848 May 25 23:21 cupsui.dll
         -rwxr--r--    1 root     ntadmin    169458 May 25 23:21 mysmbtstprn.PPD
         

        -The driver files now are in the W32X86 architecture "root" of +The driver files now are in the W32X86 architecture “root” of [print$]. -

      10. Tell Samba that these are -Driver Files -(adddriver)

        -root# rpcclient -Uroot%xxxx -c `adddriver "Windows NT x86" "mydrivername: \
        -  cupsdrvr.dll:mysmbtstprn.PPD: \
        -  cupsui.dll:cups.hlp:NULL:RAW:NULL" \
        +

      11. Tell Samba that these are driver files (adddriver).

        + +

        +root# rpcclient -Uroot%xxxx -c `adddriver "Windows NT x86" \
        +	"mydrivername:cupsdrvr.dll:mysmbtstprn.PPD: \
        +  cupsui.dll:cups.hlp:NULL:RAW:NULL" \
           localhost
         Printer Driver mydrivername successfully installed.
         

        -Note that your cannot repeat this step if it fails. It could fail even +You cannot repeat this step if it fails. It could fail even as a result of a simple typo. It will most likely have moved a part of -the driver files into the "2" subdirectory. If this step fails, you -need to go back to the fourth step and repeat it, before you can try -this one again. In this step you need to choose a name for your +the driver files into the “2” subdirectory. If this step fails, you +need to go back to the fourth step and repeat it before you can try +this one again. In this step, you need to choose a name for your driver. It is normally a good idea to use the same name as is used for -the printername; however, in big installations you may use this driver -for a number of printers which have obviously different names. So the +the printer name; however, in big installations you may use this driver +for a number of printers that obviously have different names, so the name of the driver is not fixed. -

      12. Verify where the Driver Files are now

        +

      13. Verify where the driver files are now.

         root# ls -l /etc/samba/drivers/W32X86/
         total 1
         drwxr-sr-x    2 root     ntadmin       532 May 25 23:22 2
        @@ -2127,12 +2207,13 @@ total 5039
         -rwxr--r--    1 root     ntadmin    215848 May 13 13:53 cupsui.dll
         -rwxr--r--    1 root     ntadmin    169458 May 25 23:21 mysmbtstprn.PPD
         

        -Notice how step 6 did also move the driver files to the appropriate -subdirectory. Compare with the situation after step 5. -

      14. (optional) Verify if Samba now recognizes the -Driver

        -root# rpcclient -Uroot%xxxx -c 'enumdrivers 3' localhost \
        -	| grep -B2 -A5 mydrivername
        +Notice how step 6 also moved the driver files to the appropriate
        +subdirectory. Compare this with the situation after step 5.
        +

      15. (Optional) Verify if Samba now recognizes the driver.

        + +

        +root# rpcclient -Uroot%xxxx -c 'enumdrivers 3' \
        +	localhost | grep -B2 -A5 mydrivername
         Printer Driver Info 3:
         Version: [2]
         Driver Name: [mydrivername]
        @@ -2142,21 +2223,26 @@ Datafile: [\\kde-bitshop\print$\W32X86\2\mysmbtstprn.PPD]
         Configfile: [\\kde-bitshop\print$\W32X86\2\cupsui.dll]
         Helpfile: [\\kde-bitshop\print$\W32X86\2\cups.hlp]
         

        -Remember, this command greps for the name you did choose for the -driver in step Six. This command must succeed before you can proceed. -

      16. Tell Samba which Printer should use these Driver -Files (setdriver)

        -root# rpcclient -Uroot%xxxx -c 'setdriver mysmbtstprn mydrivername' localhost
        +Remember, this command greps for the name you chose for the
        +driver in step 6. This command must succeed before you can proceed.
        +

      17. Tell Samba which printer should use these driver files (setdriver).

        + +

        +root# rpcclient -Uroot%xxxx -c 'setdriver mysmbtstprn mydrivername' \
        +	localhost
         Successfully set mysmbtstprn to driver mydrivername
         

        -Since you can bind any printername (=printqueue) to any driver, this -is a very convenient way to setup many queues which use the same -driver. You don't need to repeat all the previous steps for the -setdriver command to succeed. The only pre-conditions are: +Since you can bind any printername (print queue) to any driver, this +is a convenient way to setup many queues that use the same +driver. You do not need to repeat all the previous steps for the +setdriver command to succeed. The only preconditions are: enumdrivers must find the driver and enumprinters must find the printer. -

      18. (optional) Verify if Samba has this Association -recognized

        +

      19. (Optional) Verify if Samba has recognized this association.

        + + + +

         root# rpcclient -Uroot%xxxx -c 'getprinter mysmbtstprn 2' localhost \
           | grep driver
         drivername:[mydrivername]
        @@ -2188,169 +2274,174 @@ Printer Driver Info 3:
              Monitorname: []
              Defaultdatatype: [RAW]
          
        -root# rpcclient -Uroot%xxxx -c 'enumprinters' localhost | grep mysmbtstprn
        +root# rpcclient -Uroot%xxxx -c 'enumprinters' localhost \
        +	| grep mysmbtstprn
              name:[\\kde-bitshop\mysmbtstprn]
              description:[\\kde-bitshop\mysmbtstprn,mydrivername,mysmbtstprn]
              comment:[mysmbtstprn]
         
         

        - -Compare these results with the ones from steps 2 and 3. Note that -every single of these commands show the driver is installed. Even + +Compare these results with the ones from steps 2 and 3. Every one of these commands show the driver is installed. Even the enumprinters command now lists the driver -on the "description" line. -

      20. (optional) Tickle the Driver into a correct -Device Mode

        - -You certainly know how to install the driver on the client. In case +on the “description” line. +

      21. (Optional) Tickle the driver into a correct +device mode.

        + +You certainly know how to install the driver on the client. In case you are not particularly familiar with Windows, here is a short -recipe: browse the Network Neighbourhood, go to the Samba server, look +recipe: Browse the Network Neighborhood, go to the Samba server, and look for the shares. You should see all shared Samba printers. Double-click on the one in question. The driver should get -installed, and the network connection set up. An alternative way is to -open the "Printers (and Faxes)" folder, right-click on the printer in -question and select "Connect" or "Install". As a result, a new printer -should have appeared in your client's local "Printers (and Faxes)" -folder, named something like "printersharename on Sambahostname". +installed and the network connection set up. An alternate way is to +open the Printers (and Faxes) folder, right-click on the printer in +question and select Connect or Install. As a result, a new printer +should have appeared in your client's local Printers (and Faxes) +folder, named something like printersharename on Sambahostname.

        It is important that you execute this step as a Samba printer admin (as defined in smb.conf). Here is another method -to do this on Windows XP. It uses a commandline, which you may type -into the "DOS box" (type root's smbpassword when prompted): +to do this on Windows XP. It uses a command line, which you may type +into the “DOS box” (type root's smbpassword when prompted):

        -C:\> runas /netonly /user:root "rundll32 printui.dll,PrintUIEntry /in /n\
        -			\\sambacupsserver\mysmbtstprn"
        +C:\> runas /netonly /user:root "rundll32 printui.dll,PrintUIEntry \
        +	/in /n \\sambaserver\mysmbtstprn"
         

        -Change any printer setting once (like changing "portrait" to - "landscape"), click Apply; change the setting +Change any printer setting once (like changing portrait to + landscape), click on Apply; change the setting back. -

      22. Install the Printer on a Client -("Point'n'Print")

        -C:\> rundll32 printui.dll,PrintUIEntry /in /n "\\sambacupsserver\mysmbtstprn"
        +

      23. Install the printer on a client +(Point'n'Print).

        + +

        +C:\> rundll32 printui.dll,PrintUIEntry /in /n “\\sambaserver\mysmbtstprn
         

        -If it doesn't work it could be a permission problem with the +If it does not work it could be a permission problem with the [print$] share. -

      24. Thirteenth Step (optional): Print a Test Page

        -C:\> rundll32 printui.dll,PrintUIEntry /p /n "\\sambacupsserver\mysmbtstprn"
        +

      25. (Optional) Print a test page.

        +C:\> rundll32 printui.dll,PrintUIEntry /p /n "\\sambaserver\mysmbtstprn"
         

        -Then hit [TAB] 5 times, [ENTER] twice, [TAB] once and [ENTER] again +Then hit [TAB] five times, [ENTER] twice, [TAB] once and [ENTER] again and march to the printer. -

      26. Fourteenth Step (recommended): Study the Test Page

        +

      27. (Recommended) Study the test page.

        Hmmm.... just kidding! By now you know everything about printer -installations and you don't need to read a word. Just put it in a -frame and bolt it to the wall with the heading "MY FIRST -RPCCLIENT-INSTALLED PRINTER" - why not just throw it away! -

      28. Fifteenth Step (obligatory): Enjoy. Jump. Celebrate your -Success

        -root# echo "Cheeeeerioooooo! Success..." >> /var/log/samba/log.smbd
        -

    Troubleshooting revisited

    +installations and you do not need to read a word. Just put it in a +frame and bolt it to the wall with the heading "MY FIRST +RPCCLIENT-INSTALLED PRINTER" why not just throw it away! +

  • (Obligatory) Enjoy. Jump. Celebrate your +success.

    +root# echo "Cheeeeerioooooo! Success..." >> /var/log/samba/log.smbd
    +
  • Troubleshooting Revisited

    The setdriver command will fail, if in Samba's mind the queue is not already there. You had promising messages about the:

    -
      Printer Driver ABC successfully installed.
    -
     

    -after the "adddriver" parts of the procedure? But you are also seeing -a disappointing message like this one beneath? -

    -
    +after the adddriver parts of the procedure?  But you are also seeing
    +a disappointing message like this one?
    +

    result was NT_STATUS_UNSUCCESSFUL - -

    - +

    + It is not good enough that you -can see the queue in CUPS, using +can see the queue in CUPS, using the lpstat -p ir85wm command. A bug in most recent versions of Samba prevents the proper update of the queuelist. The recognition of newly installed CUPS printers -fails unless you re-start Samba or send a HUP to all smbd -processes. To verify if this is the reason why Samba doesn't -execute the setdriver command successfully, check if Samba "sees" +fails unless you restart Samba or send a HUP to all smbd +processes. To verify if this is the reason why Samba does not +execute the setdriver command successfully, check if Samba “sees” the printer: -

    -root# rpcclient transmeta -N -U'root%secret' -c 'enumprinters 0'| grep  ir85wm
    +

    + +

    +root# rpcclient transmeta -N -U'root%xxxx' -c 'enumprinters 0'|grep ir85wm
             printername:[ir85wm]
     

    -An alternative command could be this: -

    +An alternate command could be this: 
    +

    + +

     root# rpcclient transmeta -N -U'root%secret' -c 'getprinter ir85wm' 
             cmd = getprinter ir85wm
             flags:[0x800000]
             name:[\\transmeta\ir85wm]
             description:[\\transmeta\ir85wm,ir85wm,DPD]
    -        comment:[CUPS PostScript-Treiber for WinNT/2K/XP]
    +        comment:[CUPS PostScript-Treiber for Windows NT/200x/XP]
     

    -BTW, you can use these commands, plus a few more, of course, +By the way, you can use these commands, plus a few more, of course, to install drivers on remote Windows NT print servers too! -

    The printing *.tdb Files

    - - - - - - - - - - - - - +

    The Printing *.tdb Files

    + + + + + + + + + + + + + Some mystery is associated with the series of files with a -tdb-suffix appearing in every Samba installation. They are +tdb suffix appearing in every Samba installation. They are connections.tdb, printing.tdb, -share_info.tdb , +share_info.tdb, ntdrivers.tdb, unexpected.tdb, -brlock.tdb , +brlock.tdb, locking.tdb, ntforms.tdb, messages.tdb , ntprinters.tdb, sessionid.tdb and secrets.tdb. What is their purpose? -

    Trivial DataBase Files

    -A Windows NT (Print) Server keeps track of all information needed to serve +

    Trivial Database Files

    + +A Windows NT (print) server keeps track of all information needed to serve its duty toward its clients by storing entries in the Windows -"Registry". Client queries are answered by reading from the registry, -Administrator or user configuration settings are saved by writing into -the Registry. Samba and UNIX obviously don't have such a kind of +registry. Client queries are answered by reading from the registry, +Administrator or user configuration settings that are saved by writing into +the registry. Samba and UNIX obviously do not have such a Registry. Samba instead keeps track of all client related information in a series of *.tdb files. (TDB = Trivial Data Base). These are often located in /var/lib/samba/ -or /var/lock/samba/ . The printing related files +or /var/lock/samba/. The printing related files are ntprinters.tdb, printing.tdb,ntforms.tdb and ntdrivers.tdb. -

    Binary Format

    +

    Binary Format

    *.tdb files are not human readable. They are -written in a binary format. "Why not ASCII?", you may ask. "After all, -ASCII configuration files are a good and proofed tradition on UNIX." --- The reason for this design decision by the Samba Team is mainly +written in a binary format. “Why not ASCII?”, you may ask. “After all, +ASCII configuration files are a good and proven tradition on UNIX.” +The reason for this design decision by the Samba team is mainly performance. Samba needs to be fast; it runs a separate smbd process for each client connection, in some -environments many thousand of them. Some of these smbds might need to +environments many thousands of them. Some of these smbds might need to write-access the same *.tdb file at the same time. The file format of Samba's *.tdb files allows for this provision. Many smbd processes may write to the same *.tdb file at the same time. This wouldn't be possible with pure ASCII files. -

    Losing *.tdb Files

    +

    Losing *.tdb Files

    It is very important that all *.tdb files remain consistent over all write and read accesses. However, it may happen that these files do get corrupted. (A -kill -9 `pidof smbd` while a write access is in +kill -9 `pidof smbd' while a write access is in progress could do the damage as well as a power interruption, etc.). In cases of trouble, a deletion of the old printing-related -*.tdb files may be the only option. You need to -re-create all print related setup after that. Or you have made a +*.tdb files may be the only option. After that you need to +re-create all print-related setup or you have made a backup of the *.tdb files in time. -

    Using tdbbackup

    -Samba ships with a little utility which helps the root user of your -system to back up your *.tdb files. If you run it -with no argument, it prints a little usage message: +

    Using tdbbackup

    + + +Samba ships with a little utility that helps the root user of your +system to backup your *.tdb files. If you run it +with no argument, it prints a usage message:

     root# tdbbackup
      Usage: tdbbackup [options] <fname...>
    @@ -2361,12 +2452,12 @@ with no argument, it prints a little usage message:
        -v            verify mode (restore if corrupt)
     
     

    -Here is how I backed up my printing.tdb file: +Here is how I backed up my printing.tdb file:

     root# ls
    -.              browse.dat       locking.tdb     ntdrivers.tdb   printing.tdb
    -..             share_info.tdb   connections.tdb messages.tdb    ntforms.tdb
    -printing.tdbkp unexpected.tdb   brlock.tdb      gmon.out        namelist.debug  
    +.              browse.dat     locking.tdb     ntdrivers.tdb printing.tdb
    +..             share_info.tdb connections.tdb messages.tdb  ntforms.tdb
    +printing.tdbkp unexpected.tdb brlock.tdb      gmon.out      namelist.debug  
     ntprinters.tdb sessionid.tdb
      
     root# tdbbackup -s .bak printing.tdb
    @@ -2376,850 +2467,845 @@ ntprinters.tdb sessionid.tdb
      -rw-------    1 root     root        40960 May  2 03:44 printing.tdb
      -rw-------    1 root     root        40960 May  2 03:44 printing.tdb.bak
     
    -

    CUPS Print Drivers from Linuxprinting.org

    -CUPS ships with good support for HP LaserJet type printers. You can +

    CUPS Print Drivers from Linuxprinting.org

    + +CUPS ships with good support for HP LaserJet-type printers. You can install the generic driver as follows: -

    +

    + +

     root# lpadmin -p laserjet4plus -v parallel:/dev/lp0 -E -m laserjet.ppd
     

    The -m switch will retrieve the laserjet.ppd from the standard repository for not-yet-installed-PPDs, which CUPS typically stores in -/usr/share/cups/model. Alternatively, you may use +/usr/share/cups/model. Alternately, you may use -P /path/to/your.ppd.

    -The generic laserjet.ppd however does not support every special option -for every LaserJet-compatible model. It constitutes a sort of "least -denominator" of all the models. If for some reason it is ruled out to -you to pay for the commercially available ESP Print Pro drivers, your -first move should be to consult the database on http://www.linuxprinting.org/printer_list.cgi. +The generic laserjet.ppd, however, does not support every special option +for every LaserJet-compatible model. It constitutes a sort of “least common +denominator” of all the models. If for some reason +you must pay for the commercially available ESP Print Pro drivers, your +first move should be to consult the database on http://www.linuxprinting.org/printer_list.cgi. Linuxprinting.org has excellent recommendations about which driver is best used for each printer. Its database is kept current by the tireless work of Till Kamppeter from MandrakeSoft, who is also the -principal author of the foomatic-rip utility. +principal author of the foomatic-rip utility.

    Note

    - -The former "cupsomatic" concept is now be replaced by the new, much -more powerful "foomatic-rip". foomatic-rip is the successor of -cupsomatic. cupsomatic is no longer maintained. Here is the new URL -to the Foomatic-3.0 database:http://www.linuxprinting.org/driver_list.cgi. -If you upgrade to foomatic-rip, don't forget to also upgrade to the -new-style PPDs for your foomatic-driven printers. foomatic-rip will -not work with PPDs generated for the old cupsomatic. The new-style + +The former cupsomatic concept is now being replaced by the new +successor, a much +more powerful foomatic-rip. +cupsomatic is no longer maintained. Here is the new URL +to the Foomatic-3.0 database: http://www.linuxprinting.org/driver_list.cgi. +If you upgrade to foomatic-rip, remember to also upgrade to the +new-style PPDs for your Foomatic-driven printers. foomatic-rip will +not work with PPDs generated for the old cupsomatic. The new-style PPDs are 100% compliant to the Adobe PPD specification. They are -intended to be used by Samba and the cupsaddsmb utility also, to -provide the driver files for the Windows clients also! -

    foomatic-rip and Foomatic explained

    -Nowadays most Linux distros rely on the utilities of Linuxprinting.org -to create their printing related software (which, BTW, works on all -UNIXes and on Mac OS X or Darwin too). It is not known as well as it -should be, that it also has a very end-user friendly interface which -allows for an easy update of drivers and PPDs, for all supported -models, all spoolers, all operating systems and all package formats +also intended to be used by Samba and the cupsaddsmb utility, to +provide the driver files for the Windows clients! +

    foomatic-rip and Foomatic Explained

    + + +Nowadays, most Linux distributions rely on the utilities of Linuxprinting.org +to create their printing-related software (which, by the way, works on all +UNIXes and on Mac OS X or Darwin, too). It is not known as well as it +should be, that it also has a very end-user-friendly interface that +allows for an easy update of drivers and PPDs for all supported +models, all spoolers, all operating systems, and all package formats (because there is none). Its history goes back a few years.

    -Recently Foomatic has achieved the astonishing milestone of 1000 -listed printer models. Linuxprinting.org keeps all the +Recently, Foomatic has achieved the astonishing milestone of 1000 +listed printer models. Linuxprinting.org keeps all the important facts about printer drivers, supported models and which options are available for the various driver/printer combinations in -its Foomatic -database. Currently there are 245 drivers -in the database: many drivers support various models, and many models -may be driven by different drivers; it's your choice! -

    690 "perfect" Printers

    -At present there are 690 devices dubbed as working "perfectly", 181 -"mostly", 96 "partially" and 46 are "Paperweights". Keeping in mind +its Foomatic +database. Currently there are 245 drivers +in the database. Many drivers support various models, and many models +may be driven by different drivers its your choice! +

    690 “Perfect” Printers

    +At present, there are 690 devices dubbed as working perfectly, 181 +mostly, 96 partially, and 46 are paperweights. Keeping in mind that most of these are non-PostScript models (PostScript printers are -automatically supported supported by CUPS to perfection, by using -their own manufacturer-provided Windows-PPD...), and that a -multifunctional device never qualifies as working "perfectly" if it -doesn't also scan and copy and fax under GNU/Linux: then this is a -truly astonishing achievement. Three years ago the number was not -more than 500, and Linux or UNIX "printing" at the time wasn't -anywhere near the quality it is today! -

    How the "Printing HOWTO" started it all

    -A few years ago Grant Taylor +automatically supported by CUPS to perfection, by using +their own manufacturer-provided Windows-PPD), and that a +multifunctional device never qualifies as working perfectly if it +does not also scan and copy and fax under GNU/Linux then this is a +truly astonishing achievement! Three years ago the number was not +more than 500, and Linux or UNIX printing at the time wasn't +anywhere near the quality it is today. +

    How the Printing HOWTO Started It All

    +A few years ago Grant Taylor started it all. The roots of today's Linuxprinting.org are in the -first Linux Printing -HOWTO which he authored. As a side-project to this document, +first Linux Printing +HOWTO that he authored. As a side-project to this document, which served many Linux users and admins to guide their first steps in this complicated and delicate setup (to a scientist, printing is -"applying a structured deposition of distinct patterns of ink or toner -particles on paper substrates" ;-), he started to +“applying a structured deposition of distinct patterns of ink or toner +particles on paper substrates”, he started to build in a little Postgres database with information about the hardware and driver zoo that made up Linux printing of the time. This database became the core component of today's Foomatic collection of -tools and data. In the meantime it has moved to an XML representation +tools and data. In the meantime, it has moved to an XML representation of the data. -

    Foomatic's strange Name

    -"Why the funny name?", you ask. When it really took off, around spring +

    Foomatic's Strange Name

    + +“Why the funny name?” you ask. When it really took off, around spring 2000, CUPS was far less popular than today, and most systems used LPD, -LPRng or even PDQ to print. CUPS shipped with a few generic "drivers" +LPRng or even PDQ to print. CUPS shipped with a few generic drivers (good for a few hundred different printer models). These didn't support many device-specific options. CUPS also shipped with its own -built-in rasterization filter ("pstoraster", derived from +built-in rasterization filter (pstoraster, derived from Ghostscript). On the other hand, CUPS provided brilliant support for controlling all printer options through -standardized and well-defined "PPD files" (PostScript Printers +standardized and well-defined PPD files (PostScript Printers Description files). Plus, CUPS was designed to be easily extensible.

    -Grant already had in his database a respectable compilation -of facts about a many more printers, and the Ghostscript "drivers" -they run with. His idea, to generate PPDs from the database info +Taylor already had in his database a respectable compilation +of facts about many more printers and the Ghostscript “drivers” +they run with. His idea, to generate PPDs from the database information and use them to make standard Ghostscript filters work within CUPS, -proved to work very well. It also "killed several birds with one -stone": +proved to work very well. It also killed several birds with one +stone:

    • It made all current and future Ghostscript filter -developments available for CUPS;

    • It made available a lot of additional printer models -to CUPS users (because often the "traditional" Ghostscript way of -printing was the only one available);

    • It gave all the advanced CUPS options (web interface, +developments available for CUPS.

    • It made available a lot of additional printer models +to CUPS users (because often the traditional Ghostscript way of +printing was the only one available).

    • It gave all the advanced CUPS options (Web interface, GUI driver configurations) to users wanting (or needing) to use -Ghostscript filters.

    cupsomatic, pdqomatic, lpdomatic, directomatic

    -CUPS worked through a quickly-hacked up filter script named cupsomatic. +Ghostscript filters.

    cupsomatic, pdqomatic, lpdomatic, directomatic

    + + + +CUPS worked through a quickly-hacked up filter script named cupsomatic. cupsomatic ran the printfile through Ghostscript, constructing automatically the rather complicated command line needed. It just -required to be copied into the CUPS system to make it work. To -"configure" the way cupsomatic controls the Ghostscript rendering +needed to be copied into the CUPS system to make it work. To +configure the way cupsomatic controls the Ghostscript rendering process, it needs a CUPS-PPD. This PPD is generated directly from the contents of the database. For CUPS and the respective printer/filter -combo another Perl script named "CUPS-O-Matic" did the PPD -generation. After that was working, Grant implemented within a few +combo, another Perl script named CUPS-O-Matic did the PPD +generation. After that was working, Taylor implemented within a few days a similar thing for two other spoolers. Names chosen for the -config-generator scripts were PDQ-O-Matic -(for PDQ) and LPD-O-Matic -(for - you guessed it - LPD); the configuration here didn't use PPDs +config-generator scripts were PDQ-O-Matic +(for PDQ) and LPD-O-Matic +(for you guessed it LPD); the configuration here didn't use PPDs but other spooler-specific files.

    -From late summer of that year, Till Kamppeter -started to put work into the database. Till had been newly employed by -MandrakeSoft to -convert their printing system over to CUPS, after they had seen his -FLTK-based XPP (a GUI frontend to +From late summer of that year, Till Kamppeter +started to put work into the database. Kamppeter had been newly employed by +MandrakeSoft to +convert its printing system over to CUPS, after they had seen his +FLTK-based XPP (a GUI frontend to the CUPS lp-command). He added a huge amount of new information and new printers. He also developed the support for other spoolers, like -PPR (via ppromatic), -GNUlpr and -LPRng (both via an extended -lpdomatic) and "spoolerless" printing (directomatic).... -

    -So, to answer your question: "Foomatic" is the general name for all -the overlapping code and data behind the "*omatic" scripts.... -- -Foomatic up to versions 2.0.x required (ugly) Perl data structures -attached the Linuxprinting.org PPDs for CUPS. It had a different -"*omatic" script for every spooler, as well as different printer -configuration files.. -

    The Grand Unification -achieved...

    -This all has changed in Foomatic versions 2.9 (Beta) and released as -"stable" 3.0. This has now achieved the convergence of all *omatic -scripts: it is called the foomatic-rip. +PPR (via ppromatic), +GNUlpr and +LPRng (both via an extended +lpdomatic) and spoolerless printing (directomatic). +

    +So, to answer your question: “Foomatic” is the general name for all +the overlapping code and data behind the “*omatic” scripts. +Foomatic, up to versions 2.0.x, required (ugly) Perl data structures +attached to Linuxprinting.org PPDs for CUPS. It had a different +“*omatic” script for every spooler, as well as different printer +configuration files. +

    The Grand Unification Achieved

    + +This has all changed in Foomatic versions 2.9 (beta) and released as +“stable” 3.0. It has now achieved the convergence of all *omatic +scripts and is called the foomatic-rip. This single script is the unification of the previously different spooler-specific *omatic scripts. foomatic-rip is used by all the -different spoolers alike. Because foomatic-rip can read PPDs (both the +different spoolers alike and because it can read PPDs (both the original PostScript printer PPDs and the Linuxprinting.org-generated ones), all of a sudden all supported spoolers can have the power of -PPDs at their disposal; users only need to plug "foomatic-rip" into -their system.... For users there is improved media type and source -support; paper sizes and trays are easier to configure. +PPDs at their disposal. Users only need to plug foomatic-rip into +their system. For users there is improved media type and source +support paper sizes and trays are easier to configure.

    -Also, the New Generation of Linuxprinting.org PPDs doesn't contain -Perl data structures any more. If you are a distro maintainer and have +Also, the New Generation of Linuxprinting.org PPDs no longer contains +Perl data structures. If you are a distro maintainer and have used the previous version of Foomatic, you may want to give the new -one a spin: but don't forget to generate a new-version set of PPDs, -via the new foomatic-db-engine! +one a spin, but remember to generate a new-version set of PPDs +via the new foomatic-db-engine! Individual users just need to generate a single new PPD specific to -their model by following -the steps outlined in the Foomatic tutorial or further -below. This new development is truly amazing. +their model by following +the steps outlined in the Foomatic tutorial or in this chapter. This new development is truly amazing.

    foomatic-rip is a very clever wrapper around the need to run -Ghostscript with a different syntax, different options, different -device selections and/or different filters for each different printer -or different spooler. At the same time it can read the PPD associated +Ghostscript with a different syntax, options, device selections, and/or filters for each different printer +or spooler. At the same time it can read the PPD associated with a print queue and modify the print job according to the user selections. Together with this comes the 100% compliance of the new -Foomatic PPDs with the Adobe spec. Some really innovative features of -the Foomatic concept will surprise users: it will support custom paper -sizes for many printers; and it will support printing on media drawn -from different paper trays within the same job (in both cases: even +Foomatic PPDs with the Adobe spec. Some innovative features of +the Foomatic concept may surprise users. It will support custom paper +sizes for many printers and will support printing on media drawn +from different paper trays within the same job (in both cases, even where there is no support for this from Windows-based vendor printer drivers). -

    Driver Development outside

    +

    Driver Development Outside

    Most driver development itself does not happen within Linuxprinting.org. Drivers are written by independent maintainers. -Linuxprinting.org just pools all the information, and stores it in its +Linuxprinting.org just pools all the information and stores it in its database. In addition, it also provides the Foomatic glue to integrate the many drivers into any modern (or legacy) printing system known to the world.

    -Speaking of the different driver development groups: most of +Speaking of the different driver development groups, most of the work is currently done in three projects. These are: -

    • Omni --- a Free Software project by IBM which tries to convert their printer +

      • Omni + a free software project by IBM that tries to convert their printer driver knowledge from good-ol' OS/2 times into a modern, modular, -universal driver architecture for Linux/UNIX (still Beta). This -currently supports 437 models.

      • HPIJS -- -a Free Software project by HP to provide the support for their own +universal driver architecture for Linux/UNIX (still beta). This +currently supports 437 models.

      • HPIJS +a free software project by HP to provide the support for their own range of models (very mature, printing in most cases is perfect and provides true photo quality). This currently supports 369 -models.

      • Gimp-Print -- a Free software +models.

      • Gimp-Print a free software effort, started by Michael Sweet (also lead developer for CUPS), now directed by Robert Krawitz, which has achieved an amazing level of photo print quality (many Epson users swear that its quality is better than the vendor drivers provided by Epson for the Microsoft -platforms). This currently supports 522 models.

    Forums, Downloads, Tutorials, Howtos -- also for Mac OS X and -commercial UNIX

    -Linuxprinting.org today is the one-stop "shop" to download printer -drivers. Look for printer information and tutorials -or solve printing problems in its popular forums. But -it's not just for GNU/Linux: users and admins of commercial UNIX -systems are also going there, and the relatively new Mac -OS X forum has turned out to be one of the most frequented -fora after only a few weeks. +platforms). This currently supports 522 models.

    Forums, Downloads, Tutorials, Howtos also for Mac OS X and Commercial UNIX

    +Linuxprinting.org today is the one-stop shop to download printer +drivers. Look for printer information and tutorials +or solve printing problems in its popular forums. This forum +it's not just for GNU/Linux users, but admins of commercial UNIX +systems are also going there, and the relatively new Mac +OS X forum has turned out to be one of the most frequented +forums after only a few weeks.

    Linuxprinting.org and the Foomatic driver wrappers around Ghostscript are now a standard toolchain for printing on all the important distros. Most of them also have CUPS underneath. While in recent years -most printer data had been added by Till (who works at Mandrake), many +most printer data had been added by Kamppeter (who works at Mandrake), many additional contributions came from engineers with SuSE, RedHat, -Connectiva, Debian and others. Vendor-neutrality is an important goal +Connectiva, Debian, and others. Vendor-neutrality is an important goal of the Foomatic project.

    Note

    Till Kamppeter from MandrakeSoft is doing an excellent job in his spare time to maintain Linuxprinting.org and Foomatic. So if you use it often, please send him a note showing your appreciation. -

    Foomatic Database generated PPDs

    +

    Foomatic Database-Generated PPDs

    The Foomatic database is an amazing piece of ingenuity in itself. Not only does it keep the printer and driver information, but it is -organized in a way that it can generate "PPD" files "on the fly" from +organized in a way that it can generate PPD files on the fly from its internal XML-based datasets. While these PPDs are modelled to the -Adobe specification of "PostScript Printer Descriptions" (PPDs), the -Linuxprinting.org/Foomatic-PPDs don't normally drive PostScript -printers: they are used to describe all the bells and whistles you -could ring or blow on an Epson Stylus inkjet, or a HP Photosmart or -what-have-you. The main "trick" is one little additional line, not -envisaged by the PPD specification, starting with the "*cupsFilter" -keyword: it tells the CUPS daemon how to proceed with the PostScript +Adobe specification of PostScript Printer Descriptions (PPDs), the +Linuxprinting.org/Foomatic-PPDs do not normally drive PostScript +printers. They are used to describe all the bells and whistles you +could ring or blow on an Epson Stylus inkjet, or a HP Photosmart, or +what-have-you. The main trick is one little additional line, not +envisaged by the PPD specification, starting with the *cupsFilter +keyword. It tells the CUPS daemon how to proceed with the PostScript print file (old-style Foomatic-PPDs named the -cupsomatic filter script, while the new-style -PPDs now call foomatic-rip). This filter +cupsomatic filter script, while the new-style +PPDs are now call foomatic-rip). This filter script calls Ghostscript on the host system (the recommended variant is ESP Ghostscript) to do the rendering work. foomatic-rip knows which filter or internal device setting it should ask from Ghostscript to convert the PostScript printjob into a raster format ready for the target device. This usage of PPDs to describe the options of non-PS -printers was the invention of the CUPS developers. The rest is easy: -GUI tools (like KDE's marvellous "kprinter", -or the GNOME "gtklp", "xpp" and the CUPS -web interface) read the PPD too and use this information to present +printers was the invention of the CUPS developers. The rest is easy. +GUI tools (like KDE's marvelous kprinter, +or the GNOME gtklp, xpp and the CUPS +Web interface) read the PPD as well and use this information to present the available settings to the user as an intuitive menu selection. -

    foomatic-rip and Foomatic-PPD Download and Installation

    -Here are the steps to install a foomatic-rip driven "LaserJet 4 Plus" -compatible printer in CUPS (note that recent distributions of SuSE, -UnitedLinux and Mandrake may ship with a complete package of -Foomatic-PPDs plus the foomatic-rip utility. going directly to -Linuxprinting.org ensures you to get the latest driver/PPD files): -

    foomatic-rip and Foomatic-PPD Download and Installation

    +Here are the steps to install a foomatic-rip driven LaserJet 4 Plus-compatible +printer in CUPS (note that recent distributions of SuSE, UnitedLinux and +Mandrake may ship with a complete package of Foomatic-PPDs plus the +foomatic-rip utility. Going directly to +Linuxprinting.org ensures that you get the latest driver/PPD files): +

    • Open your browser at the Linuxprinting.org printer listpage. +

    • Check the complete list of printers in the +database.. +

    • Select your model and click on the link. +

    • You'll arrive at a page listing all drivers working with this +model (for all printers, there will always be one +recommended driver. Try this one first). +

    • In our case (HP LaserJet 4 Plus), we'll arrive at the default driver for the +HP-LaserJet 4 Plus. +

    • The recommended driver is ljet4.

    • Several links are provided here. You should visit them all if you +are not familiar with the Linuxprinting.org database. +

    • There is a link to the database page for the +ljet4. On the driver's page, you'll find important and detailed information about how to use that driver within the various available spoolers.

    • Another link may lead you to the homepage of the -driver author or the driver.

    • Important links are the ones which provide hints with -setup instructions for CUPS (http://www.linuxprinting.org/cups-doc.html), -PDQ (http://www.linuxprinting.org/pdq-doc.html), -LPD, LPRng and GNUlpr (http://www.linuxprinting.org/lpd-doc.html) -as well as PPR (http://www.linuxprinting.org/ppr-doc.html) -or "spooler-less" printing (http://www.linuxprinting.org/direct-doc.html -).

    • You can view the PPD in your browser through this -link: http://www.linuxprinting.org/ppd-o-matic.cgi?driver=ljet4&printer=HP-LaserJet_4_Plus&show=1 -

    • You can also (most importantly) -generate and download the PPD: http://www.linuxprinting.org/ppd-o-matic.cgi?driver=ljet4&printer=HP-LaserJet_4_Plus&show=0 +driver author or the driver.

    • Important links are the ones that provide hints with +setup instructions for CUPS, +PDQ, +LPD, LPRng and GNUlpr) +as well as PPR +or “spooler-lessprinting. +

    • You can view the PPD in your browser through this link: +http://www.linuxprinting.org/ppd-o-matic.cgi?driver=ljet4&printer=HP-LaserJet_4_Plus&show=1 +

    • Most importantly, you can also generate and download +the PPD.

    • The PPD contains all the information needed to use our -model and the driver; this is, once installed, working transparently -for the user. Later you'll only need to choose resolution, paper size -etc. from the web-based menu, or from the print dialog GUI, or from -the commandline.

    • Should you have ended up on the driver's page (http://www.linuxprinting.org/show_driver.cgi?driver=ljet4), -you can choose to use the "PPD-O-Matic" online PPD generator -program.

    • Select the exact model and check either "download" or -"display PPD file" and click on "Generate PPD file".

    • If you save the PPD file from the browser view, please -don't use "cut'n'past" (since it could possibly damage line endings -and tabs, which makes the PPD likely to fail its duty), but use "Save -as..." in your browser's menu. (Best is to use the "download" option -from the web page directly).

    • Another very interesting part on each driver page is -the Show execution details button. If you -select your printer model and click that button, you will get -displayed a complete Ghostscript command line, enumerating all options -available for that driver/printermodel combo. This is a great way to -"Learn Ghostscript By Doing". It is also an excellent "cheat sheet" +model and the driver; once installed, this works transparently +for the user. Later you'll only need to choose resolution, paper size, +and so on from the Web-based menu, or from the print dialog GUI, or from +the command line.

    • If you ended up on the drivers +page +you can choose to use the “PPD-O-Matic” online PPD generator +program.

    • Select the exact model and check either Download or +Display PPD file and click Generate PPD file.

    • If you save the PPD file from the browser view, please +do not use cut and paste (since it could possibly damage line endings +and tabs, which makes the PPD likely to fail its duty), but use Save +as... in your browser's menu. (It is best to use the Download option +directly from the Web page).

    • Another interesting part on each driver page is +the Show execution details button. If you +select your printer model and click on that button, +a complete Ghostscript command line will be displayed, enumerating all options +available for that combination of driver and printer model. This is a great way to +“learn Ghostscript by doing”. It is also an excellent cheat sheet for all experienced users who need to re-construct a good command line for that damn printing script, but can't remember the exact -syntax. ;-)

    • Some time during your visit to Linuxprinting.org, save +syntax.

    • Some time during your visit to Linuxprinting.org, save the PPD to a suitable place on your harddisk, say /path/to/my-printer.ppd (if you prefer to install -your printers with the help of the CUPS web interface, save the PPD to -the /usr/share/cups/model/ path and re-start -cupsd).

    • Then install the printer with a suitable commandline, -e.g.: +your printers with the help of the CUPS Web interface, save the PPD to +the /usr/share/cups/model/ path and restart +cupsd).

    • Then install the printer with a suitable command line, +like this:

      -root# lpadmin -p laserjet4plus -v parallel:/dev/lp0 -E -P path/to/my-printer.ppd
      -
    • Note again this: for all the new-style "Foomatic-PPDs" -from Linuxprinting.org, you also need a special "CUPS filter" named -"foomatic-rip".Get the latest version of "foomatic-rip" from: http://www.linuxprinting.org/foomatic2.9/download.cgi?filename=foomatic-rip&show=0 +root# lpadmin -p laserjet4plus -v parallel:/dev/lp0 -E \ + -P path/to/my-printer.ppd +

    • For all the new-style “Foomatic-PPDs” +from Linuxprinting.org, you also need a special CUPS filter named +foomatic-rip.

    • The foomatic-rip Perlscript itself also makes some -interesting reading (http://www.linuxprinting.org/foomatic2.9/download.cgi?filename=foomatic-rip&show=1), -because it is very well documented by Till's inline comments (even +interesting reading +because it is well documented by Kamppeter's inline comments (even non-Perl hackers will learn quite a bit about printing by reading -it... ;-)

    • Save foomatic-rip either directly in +it).

    • Save foomatic-rip either directly in /usr/lib/cups/filter/foomatic-rip or somewhere in -your $PATH (and don't forget to make it world-executable). Again, -don't save by "copy'n'paste" but use the appropriate link, or the -"Save as..." menu item in your browser.

    • If you save foomatic-rip in your $PATH, create a symlink: -cd /usr/lib/cups/filter/ ; ln -s `which -foomatic-rip`. For CUPS to discover this new -available filter at startup, you need to re-start +your $PATH (and remember to make it world-executable). Again, +do not save by copy and paste but use the appropriate link or the +Save as... menu item in your browser.

    • If you save foomatic-rip in your $PATH, create a symlink: +

      +root# cd /usr/lib/cups/filter/ ; ln -s `which foomatic-rip'
      +

      +

      +CUPS will discover this new available filter at startup after restarting cupsd.

    -Once you print to a printqueue set up with the Foomatic-PPD, CUPS will +Once you print to a print queue set up with the Foomatic-PPD, CUPS will insert the appropriate commands and comments into the resulting PostScript jobfile. foomatic-rip is able to read and act upon -these. foomatic-rip uses some specially encoded Foomatic comments, +these and uses some specially encoded Foomatic comments embedded in the jobfile. These in turn are used to construct -(transparently for you, the user) the complicated ghostscript command -line telling for the printer driver how exactly the resulting raster -data should look like and which printer commands to embed into the -data stream. -

    -You need: -

    • A "foomatic+something" PPD -- but it this not enough +(transparently for you, the user) the complicated Ghostscript command +line telling the printer driver exactly how the resulting raster +data should look and which printer commands to embed into the +data stream. You need: +

      • A “foomatic+something” PPD but this is not enough to print with CUPS (it is only one important -component)

      • The "foomatic-rip" filter script (Perl) in -/usr/lib/cups/filters/

      • Perl to make foomatic-rip run

      • Ghostscript (because it is doing the main work, +component).

      • The foomatic-rip filter script (Perl) in +/usr/lib/cups/filters/.

      • Perl to make foomatic-rip run.

      • Ghostscript (because it is doing the main work, controlled by the PPD/foomatic-rip combo) to produce the raster data -fit for your printermodel's consumption

      • Ghostscript must (depending on -the driver/model) contain support for a certain "device", representing -the selected "driver" for your model (as shown by "gs --h")

      • foomatic-rip needs a new version of PPDs (PPD versions -produced for cupsomatic don't work with -foomatic-rip).

    Page Accounting with CUPS

    -Often there are questions regarding "print quotas" wherein Samba users +fit for your printer model's consumption.

  • Ghostscript must (depending on +the driver/model) contain support for a certain device representing +the selected driver for your model (as shown by gs + -h).

  • foomatic-rip needs a new version of PPDs (PPD versions +produced for cupsomatic do not work with +foomatic-rip).

  • Page Accounting with CUPS

    + +Often there are questions regarding print quotas where Samba users (that is, Windows clients) should not be able to print beyond a -certain amount of pages or data volume per day, week or month. This +certain number of pages or data volume per day, week or month. This feature is dependent on the real print subsystem you're using. Samba's part is always to receive the job files from the clients (filtered or unfiltered) and hand it over to this printing subsystem.

    -Of course one could "hack" things with one's own scripts. But then -there is CUPS. CUPS supports "quotas" which can be based on sizes of -jobs or on the number of pages or both, and are spanning any time +Of course one could hack things with one's own scripts. But then +there is CUPS. CUPS supports quotas that can be based on the size of +jobs or on the number of pages or both, and span any time period you want. -

    Setting up Quotas

    -This is an example command how root would set a print quota in CUPS, -assuming an existing printer named "quotaprinter": -

    +

    Setting Up Quotas

    + +This is an example command of how root would set a print quota in CUPS, +assuming an existing printer named “quotaprinter”: +

    + +

     root# lpadmin -p quotaprinter -o job-quota-period=604800 \
     	-o job-k-limit=1024 -o job-page-limit=100
     

    This would limit every single user to print 100 pages or 1024 KB of data (whichever comes first) within the last 604,800 seconds ( = 1 week). -

    Correct and incorrect Accounting

    +

    Correct and Incorrect Accounting

    For CUPS to count correctly, the printfile needs to pass the CUPS -"pstops" filter, otherwise it uses a "dummy" count of "1". Some -printfiles don't pass it (eg: image files) but then those are mostly 1 +pstops filter, otherwise it uses a dummy count of “one”. Some +print files do not pass it (e.g., image files) but then those are mostly one- page jobs anyway. This also means that proprietary drivers for the target printer running on the client computers and CUPS/Samba, which -then spool these files as "raw" (i.e. leaving them untouched, not -filtering them), will be counted as "1-pagers" too! +then spool these files as “raw” (i.e., leaving them untouched, not +filtering them), will be counted as one-pagers too!

    -You need to send PostScript from the clients (i.e. run a PostScript +You need to send PostScript from the clients (i.e., run a PostScript driver there) to have the chance to get accounting done. If the printer is a non-PostScript model, you need to let CUPS do the job to convert the file to a print-ready format for the target printer. This -will be working for currently about 1,000 different printer models, -see the driver list at linuxprinting.org/. -

    Adobe and CUPS PostScript Drivers for Windows Clients

    -Before CUPS-1.1.16 your only option was to use the Adobe PostScript +is currently working for about a thousand different printer models. +Linuxprinting has a driver +list. +

    Adobe and CUPS PostScript Drivers for Windows Clients

    +Before CUPS 1.1.16, your only option was to use the Adobe PostScript Driver on the Windows clients. The output of this driver was not -always passed through the "pstops" filter on the CUPS/Samba side, and +always passed through the pstops filter on the CUPS/Samba side, and therefore was not counted correctly (the reason is that it often, -depending on the "PPD" being used, wrote a "PJL"-header in front of -the real PostScript which caused CUPS to skip pstops and go directly -to the "pstoraster" stage). -

    -From CUPS-1.1.16 onward you can use the "CUPS PostScript Driver for -Windows NT/2K/XP clients" (which is tagged in the download area of -http://www.cups.org/ as the "cups-samba-1.1.16.tar.gz" package). It does -not work for Win9x/ME clients. But it guarantees: -

    • to not write an PJL-header

    • to still read and support all PJL-options named in the -driver PPD with its own means

    • that the file will pass through the "pstops" filter -on the CUPS/Samba server

    • to page-count correctly the -printfile

    -You can read more about the setup of this combination in the manpage -for "cupsaddsmb" (which is only present with CUPS installed, and only +depending on the PPD being used, wrote a PJL-header in front of +the real PostScript which caused CUPS to skip pstops and go directly +to the pstoraster stage). +

    +From CUPS 1.1.16 onward, you can use the CUPS PostScript Driver for +Windows NT/200x/XP clients (which is tagged in the download area of +http://www.cups.org/ as the cups-samba-1.1.16.tar.gz +package). It does not work for Windows 9x/ME clients, but it guarantees: +

    • To not write a PJL-header.

    • To still read and support all PJL-options named in the +driver PPD with its own means.

    • That the file will pass through the pstops filter +on the CUPS/Samba server.

    • To page-count correctly the print file.

    +You can read more about the setup of this combination in the man page +for cupsaddsmb (which is only present with CUPS installed, and only current from CUPS 1.1.16). -

    The page_log File Syntax

    -These are the items CUPS logs in the "page_log" for every -single page of a job: -

    • Printer name

    • User name

    • Job ID

    • Time of printing

    • the page number

    • the number of copies

    • a billing information string -(optional)

    • the host which sent the job (included since version -1.1.19)

    -Here is an extract of my CUPS server's page_log file to illustrate the +

    The page_log File Syntax

    + +These are the items CUPS logs in the page_log for every +page of a job: +

    • Printer name

    • User name

    • Job ID

    • Time of printing

    • The page number

    • The number of copies

    • A billing information string (optional)

    • The host that sent the job (included since version 1.1.19)

    +Here is an extract of my CUPS server's page_log file to illustrate the format and included items:

    -infotec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 1 3 #marketing 10.160.50.13
    -infotec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 2 3 #marketing 10.160.50.13
    -infotec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 3 3 #marketing 10.160.50.13
    -infotec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 4 3 #marketing 10.160.50.13
    -DigiMaster9110 boss 402 [22/Apr/2003:10:33:22 +0100] 1 440 finance-dep 10.160.51.33
    +tec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 1 3 #marketing 10.160.50.13
    +tec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 2 3 #marketing 10.160.50.13
    +tec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 3 3 #marketing 10.160.50.13
    +tec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 4 3 #marketing 10.160.50.13
    +Dig9110 boss 402 [22/Apr/2003:10:33:22 +0100] 1 440 finance-dep 10.160.51.33
     

    -This was job ID "401", printed on "infotec_IS2027" by user "kurt", a -64-page job printed in 3 copies and billed to "#marketing", sent -from IP address 10.160.50.13. The next job had ID "402", was sent by -user "boss" from IP address 10.160.51.33,printed from one page 440 -copies and is set to be billed to "finance-dep". -

    Possible Shortcomings

    +This was job ID 401, printed on tec_IS2027 +by user kurt, a 64-page job printed in three copies and billed to +#marketing, sent from IP address 10.160.50.13. + The next job had ID 402, was sent by user boss +from IP address 10.160.51.33, printed from one page 440 copies and +is set to be billed to finance-dep. +

    Possible Shortcomings

    What flaws or shortcomings are there with this quota system? -

    • the ones named above (wrongly logged job in case of -printer hardware failure, etc.)

    • in reality, CUPS counts the job pages that are being +

      • The ones named above (wrongly logged job in case of +printer hardware failure, and so on).

      • In reality, CUPS counts the job pages that are being processed in software (that is, going through the -"RIP") rather than the physical sheets successfully leaving the -printing device. Thus if there is a jam while printing the 5th sheet out -of 1000 and the job is aborted by the printer, the "page count" will -still show the figure of 1000 for that job

      • all quotas are the same for all users (no flexibility -to give the boss a higher quota than the clerk), no support for -groups

      • no means to read out the current balance or the -"used-up" number of current quota

      • a user having used up 99 sheets of 100 quota will -still be able to send and print a 1,000 sheet job

      • a user being denied a job because of a filled-up quota -doesn't get a meaningful error message from CUPS other than -"client-error-not-possible".

    Future Developments

    +RIP) rather than the physical sheets successfully leaving the +printing device. Thus if there is a jam while printing the fifth sheet out +of a thousand and the job is aborted by the printer, the page count will +still show the figure of a thousand for that job.

  • All quotas are the same for all users (no flexibility +to give the boss a higher quota than the clerk) and no support for +groups.

  • No means to read out the current balance or the +“used-up” number of current quota.

  • A user having used up 99 sheets of a 100 quota will +still be able to send and print a thousand sheet job.

  • A user being denied a job because of a filled-up quota +does not get a meaningful error message from CUPS other than +“client-error-not-possible”.

  • Future Developments

    This is the best system currently available, and there are huge improvements under development for CUPS 1.2: -

    • page counting will go into the "backends" (these talk +

      • Page counting will go into the backends (these talk directly to the printer and will increase the count in sync with the -actual printing process: thus a jam at the 5th sheet will lead to a -stop in the counting)

      • quotas will be handled more flexibly

      • probably there will be support for users to inquire -their "accounts" in advance

      • probably there will be support for some other tools -around this topic

    Other Accounting Tools

    -PrintAnalyzer, pyKota, printbill, LogReport. -

    Additional Material

    +actual printing process; thus, a jam at the fifth sheet will lead to a +stop in the counting).

  • Quotas will be handled more flexibly.

  • Probably there will be support for users to inquire +about their accounts in advance.

  • Probably there will be support for some other tools +around this topic.

  • Additional Material

    A printer queue with no PPD associated to it is a -"raw" printer and all files will go directly there as received by the -spooler. The exceptions are file types "application/octet-stream" -which need "passthrough feature" enabled. "Raw" queues don't do any +“raw” printer and all files will go directly there as received by the +spooler. The exceptions are file types application/octet-stream +that need passthrough feature enabled. “Raw” queues do not do any filtering at all, they hand the file directly to the CUPS backend. -This backend is responsible for the sending of the data to the device -(as in the "device URI" notation: lpd://, socket://, -smb://, ipp://, http://, parallel:/, serial:/, usb:/ etc.) +This backend is responsible for sending the data to the device +(as in the “device URI” notation: lpd://, socket://, +smb://, ipp://, http://, parallel:/, serial:/, usb:/, and so on).

    -"cupsomatic"/Foomatic are not native CUPS drivers -and they don't ship with CUPS. They are a Third Party add-on, +cupsomatic/Foomatic are not native CUPS drivers +and they do not ship with CUPS. They are a third party add-on developed at Linuxprinting.org. As such, they are a brilliant hack to make all models (driven by Ghostscript drivers/filters in traditional spoolers) also work via CUPS, with the same (good or bad!) quality as -in these other spoolers. "cupsomatic" is only a vehicle to execute a -ghostscript commandline at that stage in the CUPS filtering chain, -where "normally" the native CUPS "pstoraster" filter would kick -in. cupsomatic by-passes pstoraster, "kidnaps" the printfile from CUPS -away and re-directs it to go through Ghostscript. CUPS accepts this, -because the associated CUPS-O-Matic-/Foomatic-PPD specifies: +in these other spoolers. cupsomatic is only a vehicle to execute a +Ghostscript commandline at that stage in the CUPS filtering chain, +where normally the native CUPS pstoraster filter would kick +in. cupsomatic bypasses pstoraster, kidnaps the printfile from CUPS +away and redirects it to go through Ghostscript. CUPS accepts this, +because the associated cupsomatic/foomatic-PPD specifies: +

    -  *cupsFilter:  "application/vnd.cups-postscript 0 cupsomatic"
    +  *cupsFilter:  "application/vnd.cups-postscript 0 cupsomatic"
     

    + This line persuades CUPS to hand the file to cupsomatic, once it has successfully converted it to the MIME type -"application/vnd.cups-postscript". This conversion will not happen for -Jobs arriving from Windows which are auto-typed -"application/octet-stream", with the according changes in +application/vnd.cups-postscript. This conversion will not happen for +Jobs arriving from Windows that are auto-typed +application/octet-stream, with the according changes in /etc/cups/mime.types in place.

    CUPS is widely configurable and flexible, even regarding its filtering mechanism. Another workaround in some situations would be to have in /etc/cups/mime.types entries as follows: +

      application/postscript           application/vnd.cups-raw  0  -
      application/vnd.cups-postscript  application/vnd.cups-raw  0  -
     

    -This would prevent all Postscript files from being filtered (rather, + +This would prevent all PostScript files from being filtered (rather, they will through the virtual nullfilter -denoted with "-"). This could only be useful for PS printers. If you +denoted with “-”). This could only be useful for PS printers. If you want to print PS code on non-PS printers (provided they support ASCII -text printing) an entry as follows could be useful: +text printing), an entry as follows could be useful: +

      */*           application/vnd.cups-raw  0  -
     

    + and would effectively send all files to the backend without further processing.

    -Lastly, you could have the following entry: +You could have the following entry: +

    -application/vnd.cups-postscript application/vnd.cups-raw 0 my_PJL_stripping_filter
    +application/vnd.cups-postscript application/vnd.cups-raw 0 \
    +	my_PJL_stripping_filter
     

    -You will need to write a my_PJL_stripping_filter -(could be a shellscript) that parses the PostScript and removes the -unwanted PJL. This would need to conform to CUPS filter design + +You will need to write a my_PJL_stripping_filter +(which could be a shell script) that parses the PostScript and removes the +unwanted PJL. This needs to conform to CUPS filter design (mainly, receive and pass the parameters printername, job-id, username, jobtitle, copies, print options and possibly the -filename). It would be installed as world executable into -/usr/lib/cups/filters/ and will be called by CUPS -if it encounters a MIME type "application/vnd.cups-postscript". +filename). It is installed as world executable into +/usr/lib/cups/filters/ and is called by CUPS +if it encounters a MIME type application/vnd.cups-postscript.

    -CUPS can handle -o job-hold-until=indefinite. -This keeps the job in the queue "on hold". It will only be printed +CUPS can handle -o job-hold-until=indefinite. +This keeps the job in the queue on hold. It will only be printed upon manual release by the printer operator. This is a requirement in -many "central reproduction departments", where a few operators manage +many central reproduction departments, where a few operators manage the jobs of hundreds of users on some big machine, where no user is allowed to have direct access (such as when the operators often need to load the proper paper type before running the 10,000 page job -requested by marketing for the mailing, etc.). -

    Auto-Deletion or Preservation of CUPS Spool Files

    -Samba print files pass through two "spool" directories. One is the -incoming directory managed by Samba, (set in the path = /var/spool/samba directive in the -[printers] section of +requested by marketing for the mailing, and so on). +

    Auto-Deletion or Preservation of CUPS Spool Files

    +Samba print files pass through two spool directories. One is the +incoming directory managed by Samba, (set in the +path = /var/spool/samba +directive in the [printers] section of smb.conf). The other is the spool directory of your UNIX print subsystem. For CUPS it is normally -/var/spool/cups/, as set by the cupsd.conf +/var/spool/cups/, as set by the cupsd.conf directive RequestRoot /var/spool/cups. -

    CUPS Configuration Settings explained

    +

    CUPS Configuration Settings Explained

    Some important parameter settings in the CUPS configuration file cupsd.conf are:

    PreserveJobHistory Yes

    This keeps some details of jobs in cupsd's mind (well it keeps the -"c12345", "c12346" etc. files in the CUPS spool directory, which do a +c12345, c12346, and so on, files in the CUPS spool directory, which do a similar job as the old-fashioned BSD-LPD control files). This is set -to "Yes" as a default. +to “Yes” as a default.

    PreserveJobFiles Yes

    This keeps the job files themselves in cupsd's mind -(well it keeps the "d12345", "d12346" etc. files in the CUPS spool -directory...). This is set to "No" as the CUPS +(it keeps the d12345, d12346 etc. files in the CUPS spool +directory). This is set to “No” as the CUPS default. -

    "MaxJobs 500"

    +

    MaxJobs 500

    This directive controls the maximum number of jobs that are kept in memory. Once the number of jobs reaches the limit, the oldest completed job is automatically purged from the system to make room for the new one. If all of the known jobs are still -pending or active then the new job will be rejected. Setting the +pending or active, then the new job will be rejected. Setting the maximum to 0 disables this functionality. The default setting is 0.

    -(There are also additional settings for "MaxJobsPerUser" and -"MaxJobsPerPrinter"...) -

    Pre-conditions

    +(There are also additional settings for MaxJobsPerUser and +MaxJobsPerPrinter...) +

    Pre-Conditions

    For everything to work as announced, you need to have three things: -

    • a Samba-smbd which is compiled against "libcups" (Check -on Linux by running "ldd `which smbd`")

    • a Samba-smb.conf setting of - printing = cups

    • another Samba-smb.conf setting of - printcap = cups

    Note

    -In this case all other manually set printing-related commands (like -print command, -lpq command, -lprm command, -lppause command or -lpresume command) are ignored and they should normally have no -influence what-so-ever on your printing. -

    Manual Configuration

    -If you want to do things manually, replace the printing = cups -by printing = bsd. Then your manually set commands may work -(haven't tested this), and a print command = lp -d %P %s; rm %s" +

    • A Samba-smbd that is compiled against libcups (check +on Linux by running ldd `which smbd').

    • A Samba-smb.conf setting of + printing = cups.

    • Another Samba-smb.conf setting of + printcap = cups.

    Note

    +In this case, all other manually set printing-related commands (like +print command, +lpq command, +lprm command, +lppause command or +lpresume command) are ignored and they should normally have no +influence whatsoever on your printing. +

    Manual Configuration

    +If you want to do things manually, replace the printing = cups +by printing = bsd. Then your manually set commands may work +(I haven't tested this), and a print command = lp -d %P %s; rm %s" may do what you need. -

    In Case of Trouble.....

    -If you have more problems, post the output of these commands -to the CUPS or Samba mailing lists (choose the one which seems more -relevant to your problem): -

    -$ grep -v ^# /etc/cups/cupsd.conf | grep -v ^$
    -$ grep -v ^# /etc/samba/smb.conf | grep -v ^$ | grep -v "^;"
    -

    -(adapt paths as needed). These commands leave out the empty -lines and lines with comments, providing the "naked settings" in a -compact way. Don't forget to name the CUPS and Samba versions you -are using! This saves bandwidth and makes for easier readability -for experts (and you are expecting experts to read them, right? -;-) -

    Printing from CUPS to Windows attached -Printers

    -From time to time the question arises, how you can print +

    Printing from CUPS to Windows Attached Printers

    +>From time to time the question arises, how can you print to a Windows attached printer -from Samba. Normally the local connection +from Samba? Normally the local connection from Windows host to printer would be done by USB or parallel -cable, but this doesn't matter to Samba. From here only an SMB +cable, but this does not matter to Samba. From here only an SMB connection needs to be opened to the Windows host. Of course, this -printer must be "shared" first. As you have learned by now, CUPS uses +printer must be shared first. As you have learned by now, CUPS uses backends to talk to printers and other -servers. To talk to Windows shared printers you need to use the -smb (surprise, surprise!) backend. Check if this -is in the CUPS backend directory. This resides usually in -/usr/lib/cups/backend/. You need to find a "smb" +servers. To talk to Windows shared printers, you need to use the +smb (surprise, surprise!) backend. Check if this +is in the CUPS backend directory. This usually resides in +/usr/lib/cups/backend/. You need to find an smb file there. It should be a symlink to smbspool -which file must exist and be executable: +and the file must exist and be executable:

     root# ls -l /usr/lib/cups/backend/
     total 253
    -drwxr-xr-x    3 root     root          720 Apr 30 19:04 .
    -drwxr-xr-x    6 root     root          125 Dec 19 17:13 ..
    --rwxr-xr-x    1 root     root        10692 Feb 16 21:29 canon
    --rwxr-xr-x    1 root     root        10692 Feb 16 21:29 epson
    -lrwxrwxrwx    1 root     root            3 Apr 17 22:50 http -> ipp
    --rwxr-xr-x    1 root     root        17316 Apr 17 22:50 ipp
    --rwxr-xr-x    1 root     root        15420 Apr 20 17:01 lpd
    --rwxr-xr-x    1 root     root         8656 Apr 20 17:01 parallel
    --rwxr-xr-x    1 root     root         2162 Mar 31 23:15 pdfdistiller
    -lrwxrwxrwx    1 root     root           25 Apr 30 19:04 ptal -> /usr/sbin/ptal-cups
    --rwxr-xr-x    1 root     root         6284 Apr 20 17:01 scsi
    -lrwxrwxrwx    1 root     root           17 Apr  2 03:11 smb -> /usr/bin/smbspool
    --rwxr-xr-x    1 root     root         7912 Apr 20 17:01 socket
    --rwxr-xr-x    1 root     root         9012 Apr 20 17:01 usb
    +drwxr-xr-x    3 root   root     720 Apr 30 19:04 .
    +drwxr-xr-x    6 root   root     125 Dec 19 17:13 ..
    +-rwxr-xr-x    1 root   root   10692 Feb 16 21:29 canon
    +-rwxr-xr-x    1 root   root   10692 Feb 16 21:29 epson
    +lrwxrwxrwx    1 root   root       3 Apr 17 22:50 http -> ipp
    +-rwxr-xr-x    1 root   root   17316 Apr 17 22:50 ipp
    +-rwxr-xr-x    1 root   root   15420 Apr 20 17:01 lpd
    +-rwxr-xr-x    1 root   root    8656 Apr 20 17:01 parallel
    +-rwxr-xr-x    1 root   root    2162 Mar 31 23:15 pdfdistiller
    +lrwxrwxrwx    1 root   root      25 Apr 30 19:04 ptal -> /usr/sbin/ptal-cups
    +-rwxr-xr-x    1 root   root    6284 Apr 20 17:01 scsi
    +lrwxrwxrwx    1 root   root      17 Apr  2 03:11 smb -> /usr/bin/smbspool
    +-rwxr-xr-x    1 root   root    7912 Apr 20 17:01 socket
    +-rwxr-xr-x    1 root   root    9012 Apr 20 17:01 usb
     
     root# ls -l `which smbspool`
    --rwxr-xr-x    1 root     root       563245 Dec 28 14:49 /usr/bin/smbspool
    +-rwxr-xr-x    1 root   root  563245 Dec 28 14:49 /usr/bin/smbspool
     

    -If this symlink doesn't exist, create it: +If this symlink does not exist, create it:

     root# ln -s `which smbspool` /usr/lib/cups/backend/smb
     

    -smbspool has been written by Mike Sweet from the CUPS folks. It is +smbspool has been written by Mike Sweet from the CUPS folks. It is included and ships with Samba. It may also be used with print subsystems other than CUPS, to spool jobs to Windows printer shares. To -set up printer "winprinter" on CUPS, you need to have a "driver" for +set up printer winprinter on CUPS, you need to have a driver for it. Essentially this means to convert the print data on the CUPS/Samba host to a format that the printer can digest (the Windows host is -unable to convert any files you may send). This also means you should +unable to convert any files you may send). This also means you should be able to print to the printer if it were hooked directly at your Samba/CUPS host. For troubleshooting purposes, this is what you -should do, to determine if that part of the process chain is in +should do to determine if that part of the process chain is in order. Then proceed to fix the network connection/authentication to -the Windows host, etc. +the Windows host, and so on.

    -To install a printer with the smb backend on CUPS, use this command: +To install a printer with the smb backend on CUPS, use this command:

     root# lpadmin -p winprinter -v smb://WINDOWSNETBIOSNAME/printersharename \
       -P /path/to/PPD
     

    -The PPD must be able to direct CUPS to generate -the print data for the target model. For PostScript printers just use +The PPD must be able to direct CUPS to generate +the print data for the target model. For PostScript printers, just use the PPD that would be used with the Windows NT PostScript driver. But what can you do if the printer is only accessible with a password? Or if the printer's host is part of another workgroup? This is provided -for: you can include the required parameters as part of the -smb:// device-URI. Like this: -

    • smb://WORKGROUP/WINDOWSNETBIOSNAME/printersharename

    • smb://username:password@WORKGROUP/WINDOWSNETBIOSNAME/printersharename

    • smb://username:password@WINDOWSNETBIOSNAME/printersharename

    +for: You can include the required parameters as part of the +smb:// device-URI like this: +

    • smb://WORKGROUP/WINDOWSNETBIOSNAME/printersharename
    • smb://username:password@WORKGROUP/WINDOWSNETBIOSNAME/printersharename
    • smb://username:password@WINDOWSNETBIOSNAME/printersharename

    Note that the device-URI will be visible in the process list of the -Samba server (e.g. when someone uses the ps -aux +Samba server (e.g., when someone uses the ps -aux command on Linux), even if the username and passwords are sanitized -before they get written into the log files. So this is an inherently -insecure option. However it is the only one. Don't use it if you want +before they get written into the log files. So this is an inherently +insecure option, however, it is the only one. Don't use it if you want to protect your passwords. Better share the printer in a way that -doesn't require a password! Printing will only work if you have a +does not require a password! Printing will only work if you have a working netbios name resolution up and running. Note that this is a -feature of CUPS and you don't necessarily need to have smbd running -(but who wants that? :-). -

    More CUPS filtering Chains

    +feature of CUPS and you do not necessarily need to have smbd running. + +

    More CUPS-Filtering Chains

    The following diagrams reveal how CUPS handles print jobs. -

    Figure 19.17. Filtering chain 1

    Filtering chain 1

    Figure 19.18. Filtering chain with cupsomatic

    Filtering chain with cupsomatic

    Note

    -Gimp-Print and some other 3rd-Party-Filters (like TurboPrint) to -CUPS and ESP PrintPro plug-in where rastertosomething is noted. -

    Common Errors

    Win9x client can't install driver

    For Win9x clients require the printer names to be 8 -chars (or "8 plus 3 chars suffix") max; otherwise the driver files -won't get transferred when you want to download them from -Samba.

    "cupsaddsmb" keeps asking for root password in - neverending loop

    Have you security = user? Have +

    Figure 19.17. Filtering chain 1.

    Filtering chain 1.

    Figure 19.18. Filtering chain with cupsomatic

    Filtering chain with cupsomatic

    Common Errors

    Windows 9x/ME Client Can't Install Driver

    For Windows 9x/ME, clients require the printer names to be eight +characters (or “8 plus 3 chars suffix”) max; otherwise, the driver files +will not get transferred when you want to download them from +Samba.

    cupsaddsmb” Keeps Asking for Root Password in Never-ending Loop

    Have you security = user? Have you used smbpasswd to give root a Samba account? -You can do 2 things: open another terminal and execute -smbpasswd -a root to create the account, and -continue with entering the password into the first terminal. Or break -out of the loop by hitting ENTER twice (without trying to type a -password).

    "cupsaddsmb" gives "No PPD file for printer..." - message while PPD file is present

    Have you enabled printer sharing on CUPS? This means: -do you have a <Location +You can do two things: open another terminal and execute +smbpasswd -a root to create the account and +continue entering the password into the first terminal. Or break +out of the loop by pressing ENTER twice (without trying to type a +password).

    cupsaddsmb” Errors

    + The use of “cupsaddsmb” gives “No PPD file for printer...” Message While PPD File Is Present. + What might the problem be? +

    Have you enabled printer sharing on CUPS? This means: +Do you have a <Location /printers>....</Location> section in CUPS -server's cupsd.conf which doesn't deny access to -the host you run "cupsaddsmb" from? It could be +server's cupsd.conf that does not deny access to +the host you run “cupsaddsmb” from? It could be an issue if you use cupsaddsmb remotely, or if you use it with a -h parameter: cupsaddsmb -H sambaserver -h cupsserver -v printername.

    Is your -"TempDir" directive in -cupsd.conf +TempDir directive in +cupsd.conf set to a valid value and is it writeable? -

    Client can't connect to Samba printer

    Use smbstatus to check which user +

    Client Can't Connect to Samba Printer

    Use smbstatus to check which user you are from Samba's point of view. Do you have the privileges to write into the [print$] -share?

    Can't reconnect to Samba under new account - from Win2K/XP

    Once you are connected as the "wrong" user (for -example as "nobody", which often occurs if you have -map to guest = bad user), Windows Explorer will not accept an -attempt to connect again as a different user. There won't be any byte +share?

    New Account Reconnection from Windows 200x/XP Troubles

    Once you are connected as the wrong user (for +example, as nobody, which often occurs if you have +map to guest = bad user), Windows Explorer will not accept an +attempt to connect again as a different user. There will not be any byte transfered on the wire to Samba, but still you'll see a stupid error -message which makes you think that Samba has denied access. Use +message that makes you think Samba has denied access. Use smbstatus to check for active connections. Kill the -PIDs. You still can't re-connect and get the dreaded +PIDs. You still can't re-connect and you get the dreaded You can't connect with a second account from the same -machine message, as soon as you are trying? And you -don't see any single byte arriving at Samba (see logs; use "ethereal") -indicating a renewed connection attempt? Shut all Explorer Windows. +machine message, as soon as you are trying. And you +do not see any single byte arriving at Samba (see logs; use “ethereal”) +indicating a renewed connection attempt. Shut all Explorer Windows. This makes Windows forget what it has cached in its memory as -established connections. Then re-connect as the right user. Best +established connections. Then reconnect as the right user. The best method is to use a DOS terminal window and first do net use z: \\GANDALF\print$ /user:root. Check with smbstatus that you are connected under a -different account. Now open the "Printers" folder (on the Samba server -in the Network Neighbourhood), right-click the +different account. Now open the Printers folder (on the Samba server +in the Network Neighborhood), right-click on the printer in question and select -Connect...

    Avoid being connected to the Samba server as the - "wrong" user

    You see per smbstatus that you are -connected as user "nobody"; while you wanted to be "root" or -"printeradmin"? This is probably due to -map to guest = bad user, which silently connects you under the guest account, +Connect...

    Avoid Being Connected to the Samba Server as the Wrong User

    You see per smbstatus that you are +connected as user nobody; while you want to be root or +printeradmin. This is probably due to +map to guest = bad user, which silently connects you under the guest account when you gave (maybe by accident) an incorrect username. Remove -map to guest, if you want to prevent -this.

    Upgrading to CUPS drivers from Adobe drivers on - NT/2K/XP clients gives problems

    First delete all "old" Adobe-using printers. Then -delete all "old" Adobe drivers. (On Win2K/XP, right-click in -background of "Printers" folder, select "Server Properties...", select -tab "Drivers" and delete here).

    Can't use "cupsaddsmb" on Samba server which is - a PDC

    Do you use the "naked" root user name? Try to do it +map to guest, if you want to prevent +this.

    Upgrading to CUPS Drivers from Adobe Drivers

    +This information came from a mailinglist posting regarding problems experienced when +upgrading from Adobe drivers to CUPS drivers on Microsoft Windows NT/200x/XP Clients. +

    First delete all old Adobe-using printers. Then +delete all old Adobe drivers. (On Windows 200x/XP, right-click in +the background of Printers folder, select Server Properties..., select +tab Drivers and delete here).

    Can't Use “cupsaddsmb” on Samba Server Which Is a PDC

    Do you use the “naked” root user name? Try to do it this way: cupsaddsmb -U DOMAINNAME\\root -v printername> (note the two backslashes: the first one is -required to "escape" the second one).

    Deleted Win2K printer driver is still shown

    Deleting a printer on the client won't delete the +required to “escape” the second one).

    Deleted Windows 200x Printer Driver Is Still Shown

    Deleting a printer on the client will not delete the driver too (to verify, right-click on the white background of the -"Printers" folder, select "Server Properties" and click on the -"Drivers" tab). These same old drivers will be re-used when you try to +Printers folder, select Server Properties and click on the +Drivers tab). These same old drivers will be re-used when you try to install a printer with the same name. If you want to update to a new driver, delete the old ones first. Deletion is only possible if no -other printer uses the same driver.

    Win2K/XP "Local Security - Policies"

    Local Security Policies may not -allow the installation of unsigned drivers. "Local Security Policies" +other printer uses the same driver.

    Windows 200x/XP "Local Security Policies"

    Local Security Policies may not +allow the installation of unsigned drivers. “Local Security Policies” may not allow the installation of printer drivers at -all.

    WinXP clients: "Administrator can not install - printers for all local users"

    Windows XP handles SMB printers on a "per-user" basis. +all.

    Administrator Cannot Install Printers for All Local Users

    Windows XP handles SMB printers on a “per-user” basis. This means every user needs to install the printer himself. To have a printer available for everybody, you might want to use the built-in IPP client capabilities of WinXP. Add a printer with the print path of -http://cupsserver:631/printers/printername. -Still looking into this one: maybe a "logon script" could +http://cupsserver:631/printers/printername. +We're still looking into this one. Maybe a logon script could automatically install printers for all -users.

    "Print Change Notify" functions on - NT-clients

    For "print change notify" functions on NT++ clients, -these need to run the "Server" service first (re-named to -File & Print Sharing for MS Networks in -XP).

    WinXP-SP1

    WinXP-SP1 introduced a Point and Print -Restriction Policy (this restriction doesn't apply to -"Administrator" or "Power User" groups of users). In Group Policy -Object Editor: go to User Configuration, - Administrative Templates, Control Panel, -Printers. The policy is automatically set to -Enabled and the Users can only Point -and Print to machines in their Forest . You probably need -to change it to Disabled or Users can -only Point and Print to these servers in order to make -driver downloads from Samba possible.

    Print options for all users can't be set on Win2K/XP

    How are you doing it? I bet the wrong way (it is not -very easy to find out, though). There are 3 different ways to bring +users.

    Print Change Notify Functions on NT-clients

    For print change, notify functions on NT++ clients. +These need to run the Server service first (renamed to +File & Print Sharing for MS Networks in +XP).

    WinXP-SP1

    WinXP-SP1 introduced a Point and Print Restriction Policy (this restriction does not apply to +“Administrator” or “Power User” groups of users). In Group Policy +Object Editor, go to User Configuration -> Administrative Templates -> + Control Panel -> Printers. The policy is automatically set to +Enabled and the Users can only Point +and Print to machines in their Forest . You probably need +to change it to Disabled or Users can +only Point and Print to these servers to make +driver downloads from Samba possible. +

    Print Options for All Users Can't Be Set on Windows 200x/XP

    How are you doing it? I bet the wrong way (it is not +easy to find out, though). There are three different ways to bring you to a dialog that seems to set everything. All -three dialogs look the same. Only one of them -does what you intend. You need to be -Administrator or Print Administrator to do this for all users. Here +three dialogs look the same, yet only one of them +does what you intend. You need to be +Administrator or Print Administrator to do this for all users. Here is how I do in on XP: -

    1. The first "wrong" way: +

      1. The first wrong way: -

        1. Open the Printers +

          1. Open the Printers folder.

          2. Right-click on the printer -(remoteprinter on cupshost) and -select in context menu Printing -Preferences...

          3. Look at this dialog closely and remember what it looks +(remoteprinter on cupshost) and +select in context menu Printing +Preferences...

          4. Look at this dialog closely and remember what it looks like.

          -

        2. The second "wrong" way: +

        3. The second wrong way: -

          1. Open the Printers -folder.

          2. Right-click on the printer (remoteprinter on -cupshost) and select in the context menu -Properties

          3. Click on the General -tab

          4. Click on the button Printing -Preferences...

          5. A new dialog opens. Keep this dialog open and go back +

            1. Open the Printers +folder.

            2. Right-click on the printer (remoteprinter on +cupshost) and select the context menu +Properties.

            3. Click on the General +tab.

            4. Click on the button Printing +Preferences...

            5. A new dialog opens. Keep this dialog open and go back to the parent dialog.

            -

          6. The third, the "correct" way: (should you do -this from the beginning, just carry out steps 1. and 2. from second -"way" above) +

          7. The third, and the correct way: -

            1. Click on the Advanced -tab. (Hmmm... if everything is "Grayed Out", then you are not logged -in as a user with enough privileges).

            2. Click on the Printing -Defaults... button.

            3. On any of the two new tabs, click on the -Advanced... -button.

            4. A new dialog opens. Compare this one to the other, -identical looking one from "B.5" or A.3".

            +

            1. Open the Printers +folder.

            2. Click on the Advanced +tab. (If everything is “grayed out,” then you are not logged +in as a user with enough privileges).

            3. Click on the Printing +Defaults... button.

            4. On any of the two new tabs, click on the +Advanced... +button.

            5. A new dialog opens. Compare this one to the other +identical looking one from “B.5” or A.3".

          -Do you see any difference? I don't either... However, only the last -one, which you arrived at with steps "C.1.-6." will save any settings +Do you see any difference? I don't either. However, only the last +one, which you arrived at with steps “C.1.-6.”, will save any settings permanently and be the defaults for new users. If you want all clients to get the same defaults, you need to conduct these steps as -Administrator (printer admin in +Administrator (printer admin in smb.conf) before a client downloads the driver (the clients can later set their own per-user defaults by following the -procedures A. or B. -above).

        Most common blunders in driver - settings on Windows clients

        Don't use Optimize for -Speed: use Optimize for -Portability instead (Adobe PS Driver) Don't use -Page Independence: No: always -settle with Page Independence: -Yes (Microsoft PS Driver and CUPS PS Driver for -WinNT/2K/XP) If there are problems with fonts: use -Download as Softfont into -printer (Adobe PS Driver). For -TrueType Download Options -choose Outline. Use PostScript -Level 2, if you are having trouble with a non-PS printer, and if -there is a choice.

        cupsaddsmb does not work - with newly installed printer

        Symptom: the last command of -cupsaddsmb doesn't complete successfully: +procedures A or B +above).

        Most Common Blunders in Driver Settings on Windows Clients

        Don't use Optimize for +Speed, but use Optimize for +Portability instead (Adobe PS Driver). Don't use +Page Independence: No: always +settle with Page Independence: +Yes (Microsoft PS Driver and CUPS PS Driver for +Windows NT/200x/XP). If there are problems with fonts, use +Download as Softfont into +printer (Adobe PS Driver). For +TrueType Download Options +choose Outline. Use PostScript +Level 2, if you are having trouble with a non-PS printer and if +there is a choice.

        cupsaddsmb Does Not Work with Newly Installed Printer

        Symptom: The last command of +cupsaddsmb does not complete successfully: cmd = setdriver printername printername result was NT_STATUS_UNSUCCESSFUL then possibly the printer was not yet -"recognized" by Samba. Did it show up in Network -Neighbourhood? Did it show up in rpcclient -hostname -c 'enumprinters'? Restart smbd (or send a +recognized by Samba. Did it show up in Network +Neighborhood? Did it show up i n rpcclient +hostname -c `enumprinters'? Restart smbd (or send a kill -HUP to all processes listed by smbstatus and try -again.

        Permissions on -/var/spool/samba/ get reset after each -reboot

        Have you by accident set the CUPS spool directory to -the same location? (RequestRoot -/var/spool/samba/ in cupsd.conf or +again.

        Permissions on /var/spool/samba/ Get Reset After Each Reboot

        Have you ever by accident set the CUPS spool directory to +the same location? (RequestRoot /var/spool/samba/ in cupsd.conf or the other way round: /var/spool/cups/ is set as -path> in the [printers] -section). These must be different. Set +path> in the [printers] +section). These must be different. Set + RequestRoot /var/spool/cups/ in -cupsd.conf and path = +cupsd.conf and path = /var/spool/samba in the [printers] section of smb.conf. Otherwise cupsd will -sanitize permissions to its spool directory with each restart, and -printing will not work reliably.

        Printer named "lp" -intermittently swallows jobs and spits out completely different -ones

        It is a very bad idea to name any printer "lp". This +sanitize permissions to its spool directory with each restart and +printing will not work reliably.

        Print Queue Called “lp” Mis-handles Print Jobs

        +In this case a print queue called “lp” intermittently swallows jobs and +spits out completely different ones from what was sent. +

        It is a bad idea to name any printer “lp”. This is the traditional UNIX name for the default printer. CUPS may be set -up to do an automatic creation of "Implicit Classes". This means, to +up to do an automatic creation of Implicit Classes. This means, to group all printers with the same name to a pool of devices, and -loadbalancing the jobs across them in a round-robin fashion. Chances -are high that someone else has an "lp" named printer too. You may +load-balancing the jobs across them in a round-robin fashion. Chances +are high that someone else has a printer named “lp” too. You may receive his jobs and send your own to his device unwittingly. To have tight control over the printer names, set BrowseShortNames -No. It will present any printer as "printername@cupshost" -then, giving you a better control over what may happen in a large -networked environment.

        Location of Adobe PostScript driver files necessary for "cupsaddsmb"

        Use smbclient to connect to any +No. It will present any printer as printername@cupshost +and then gives you better control over what may happen in a large +networked environment.

        Location of Adobe PostScript Driver Files for “cupsaddsmb

        Use smbclient to connect to any Windows box with a shared PostScript printer: smbclient //windowsbox/print\$ -U guest. You can navigate to the W32X86/2 subdir to mget ADOBE* -and other files or to WIN40/0 to do the same. -- +and other files or to WIN40/0 to do the same. Another option is to download the *.exe packaged -files from the Adobe website.

      An Overview of the CUPS Printing Processes

      Figure 19.19. CUPS Printing Overview

      CUPS Printing Overview
    +files from the Adobe Web site.

    Overview of the CUPS Printing Processes

    A complete overview of the CUPS printing processes can be found in .

    Figure 19.19. CUPS printing overview.

    CUPS printing overview.


    [4] http://www.cups.org/cups-help.html
    diff --git a/docs/htmldocs/ClientConfig.html b/docs/htmldocs/ClientConfig.html index ab34354e2d..ce1f591cdd 100644 --- a/docs/htmldocs/ClientConfig.html +++ b/docs/htmldocs/ClientConfig.html @@ -1,4 +1,4 @@ -Chapter 9. MS Windows Network Configuration Guide

    Chapter 9. MS Windows Network Configuration Guide

    John H. Terpstra

    Samba Team

    Table of Contents

    Note

    Note

    +Chapter 9. MS Windows Network Configuration Guide

    Chapter 9. MS Windows Network Configuration Guide

    John H. Terpstra

    Samba Team

    Table of Contents

    Note

    Note

    This chapter did not make it into this release. It is planned for the published release of this document. -

    +

    diff --git a/docs/htmldocs/DNSDHCP.html b/docs/htmldocs/DNSDHCP.html index 1472c1925b..fa61a0f7f2 100644 --- a/docs/htmldocs/DNSDHCP.html +++ b/docs/htmldocs/DNSDHCP.html @@ -1,4 +1,4 @@ -Chapter 40. DNS and DHCP Configuration Guide

    Chapter 40. DNS and DHCP Configuration Guide

    John H. Terpstra

    Samba Team

    Table of Contents

    Note

    Note

    +Chapter 40. DNS and DHCP Configuration Guide

    Chapter 40. DNS and DHCP Configuration Guide

    John H. Terpstra

    Samba Team

    Table of Contents

    Note

    Note

    This chapter did not make it into this release. It is planned for the published release of this document. -

    +

    diff --git a/docs/htmldocs/FastStart.html b/docs/htmldocs/FastStart.html index 64c38702fd..fb1f5bcc79 100644 --- a/docs/htmldocs/FastStart.html +++ b/docs/htmldocs/FastStart.html @@ -1,4 +1,4 @@ -Chapter 3. Fast Start for the Impatient

    Chapter 3. Fast Start for the Impatient

    John H. Terpstra

    Samba Team

    Table of Contents

    Note

    Note

    +Chapter 3. Fast Start for the Impatient

    Chapter 3. Fast Start for the Impatient

    John H. Terpstra

    Samba Team

    Table of Contents

    Note

    Note

    This chapter did not make it into this release. It is planned for the published release of this document. -

    +

    diff --git a/docs/htmldocs/Further-Resources.html b/docs/htmldocs/Further-Resources.html index 8464c480c2..39c13a5ad5 100644 --- a/docs/htmldocs/Further-Resources.html +++ b/docs/htmldocs/Further-Resources.html @@ -1,100 +1,100 @@ -Chapter 41. Further Resources

    Chapter 41. Further Resources

    Jelmer R. Vernooij

    The Samba Team

    May 1, 2003

    Websites

    Related updates from Microsoft

    • + + Enhanced Encryption for Windows 95 Password Cache + +

    • + + Windows '95 File Sharing Updates + +

    • + + Windows for Workgroups Sharing Updates + +

    diff --git a/docs/htmldocs/InterdomainTrusts.html b/docs/htmldocs/InterdomainTrusts.html index 8422c52073..358321dac2 100644 --- a/docs/htmldocs/InterdomainTrusts.html +++ b/docs/htmldocs/InterdomainTrusts.html @@ -1,138 +1,136 @@ -Chapter 16. Interdomain Trust Relationships

    Chapter 16. Interdomain Trust Relationships

    John H. Terpstra

    Samba Team

    Rafal Szczesniak

    Samba Team

    Jelmer R. Vernooij

    drawing
    The Samba Team

    Stephen Langasek

    April 3, 2003

    -Samba-3 supports NT4 style domain trust relationships. This is feature that many sites -will want to use if they migrate to Samba-3 from and NT4 style domain and do NOT want to -adopt Active Directory or an LDAP based authentication back end. This section explains +Chapter 16. Interdomain Trust Relationships

    Chapter 16. Interdomain Trust Relationships

    John H. Terpstra

    Samba Team

    Rafal Szczesniak

    Samba Team

    Jelmer R. Vernooij

    drawing
    The Samba Team

    Stephen Langasek

    April 3, 2003

    + +Samba-3 supports NT4-style domain trust relationships. This is a feature that many sites +will want to use if they migrate to Samba-3 from an NT4-style domain and do not want to +adopt Active Directory or an LDAP-based authentication backend. This section explains some background information regarding trust relationships and how to create them. It is now -possible for Samba-3 to trust NT4 (and vice versa), as well as to create Samba3-to-Samba3 +possible for Samba-3 to trust NT4 (and vice versa), as well as to create Samba-to-Samba trusts. -

    Features and Benefits

    -Samba-3 can participate in Samba-to-Samba as well as in Samba-to-MS Windows NT4 style -trust relationships. This imparts to Samba similar scalability as is possible with -MS Windows NT4. +

    Features and Benefits

    +Samba-3 can participate in Samba-to-Samba as well as in Samba-to-MS Windows NT4-style +trust relationships. This imparts to Samba similar scalability as with MS Windows NT4.

    Given that Samba-3 has the capability to function with a scalable backend authentication -database such as LDAP, and given it's ability to run in Primary as well as Backup Domain control +database such as LDAP, and given its ability to run in Primary as well as Backup Domain Control modes, the administrator would be well advised to consider alternatives to the use of Interdomain trusts simply because by the very nature of how this works it is fragile. That was, after all, a key reason for the development and adoption of Microsoft Active Directory. -

    Trust Relationship Background

    -MS Windows NT3.x/4.0 type security domains employ a non-hierarchical security structure. -The limitations of this architecture as it affects the scalability of MS Windows networking -in large organisations is well known. Additionally, the flat namespace that results from +

    Trust Relationship Background

    +MS Windows NT3/4 type security domains employ a non-hierarchical security structure. +The limitations of this architecture as it effects the scalability of MS Windows networking +in large organizations is well known. Additionally, the flat namespace that results from this design significantly impacts the delegation of administrative responsibilities in -large and diverse organisations. +large and diverse organizations.

    Microsoft developed Active Directory Service (ADS), based on Kerberos and LDAP, as a means -of circumventing the limitations of the older technologies. Not every organisation is ready -or willing to embrace ADS. For small companies the older NT4 style domain security paradigm -is quite adequate, there thus remains an entrenched user base for whom there is no direct +of circumventing the limitations of the older technologies. Not every organization is ready +or willing to embrace ADS. For small companies the older NT4-style domain security paradigm +is quite adequate, there remains an entrenched user base for whom there is no direct desire to go through a disruptive change to adopt ADS.

    -Microsoft introduced with MS Windows NT the ability to allow differing security domains -to affect a mechanism so that users from one domain may be given access rights and privileges +With MS Windows NT, Microsoft introduced the ability to allow differing security domains +to effect a mechanism so users from one domain may be given access rights and privileges in another domain. The language that describes this capability is couched in terms of Trusts. Specifically, one domain will trust the users from another domain. The domain from which users are available to another security domain is said to be a trusted domain. The domain in which those users have assigned rights and privileges is the trusting domain. With NT3.x/4.0 all trust relationships are always in one direction only, thus if users in both domains are to have privileges and rights in each others' domain, then it is -necessary to establish two (2) relationships, one in each direction. +necessary to establish two relationships, one in each direction.

    -In an NT4 style MS security domain, all trusts are non-transitive. This means that if there -are three (3) domains (let's call them RED, WHITE, and BLUE) where RED and WHITE have a trust +In an NT4-style MS security domain, all trusts are non-transitive. This means that if there +are three domains (let's call them RED, WHITE and BLUE) where RED and WHITE have a trust relationship, and WHITE and BLUE have a trust relationship, then it holds that there is no -implied trust between the RED and BLUE domains. ie: Relationships are explicit and not +implied trust between the RED and BLUE domains. Relationships are explicit and not transitive.

    - New to MS Windows 2000 ADS security contexts is the fact that trust relationships are two-way by default. Also, all inter-ADS domain trusts are transitive. In the case of the RED, WHITE and BLUE -domains above, with Windows 2000 and ADS the RED and BLUE domains CAN trust each other. This is -an inherent feature of ADS domains. Samba-3 implements MS Windows NT4 -style Interdomain trusts and interoperates with MS Windows 200x ADS -security domains in similar manner to MS Windows NT4 style domains. -

    Native MS Windows NT4 Trusts Configuration

    -There are two steps to creating an interdomain trust relationship. To effect a two-way trust -relationship it is necessary for each domain administrator to create a trust account for the +domains above, with Windows 2000 and ADS the RED and BLUE domains can trust each other. This is +an inherent feature of ADS domains. Samba-3 implements MS Windows NT4-style Interdomain trusts +and interoperates with MS Windows 200x ADS security domains in similar manner to MS Windows NT4-style domains. +

    Native MS Windows NT4 Trusts Configuration

    +There are two steps to creating an interdomain trust relationship. To effect a two-way trust +relationship, it is necessary for each domain administrator to create a trust account for the other domain to use in verifying security credentials. - - -

    Creating an NT4 Domain Trust

    + +

    Creating an NT4 Domain Trust

    For MS Windows NT4, all domain trust relationships are configured using the Domain User Manager. This is done from the Domain User Manager Policies entry on the menu bar. From the Policy menu, select -Trust Relationships. Next to the lower box labelled +Trust Relationships. Next to the lower box labeled Permitted to Trust this Domain are two buttons, Add and Remove. The Add button will open a panel in which to enter the name of the remote domain that will be able to assign access rights to users in -your domain. You will also need to enter a password for this trust relationship, which the +your domain. You will also need to enter a password for this trust relationship, which the trusting domain will use when authenticating users from the trusted domain. The password needs to be typed twice (for standard confirmation). -

    Completing an NT4 Domain Trust

    - +

    Completing an NT4 Domain Trust

    + A trust relationship will work only when the other (trusting) domain makes the appropriate connections -with the trusted domain. To consummate the trust relationship the administrator will launch the -Domain User Manager, from the menu select Policies, then select Trust Relationships, then click on the -Add button that is next to the box that is labelled -Trusted Domains. A panel will open in which must be entered the name of the remote -domain as well as the password assigned to that trust. -

    Inter-Domain Trust Facilities

    +with the trusted domain. To consummate the trust relationship, the administrator will launch the +Domain User Manager from the menu select Policies, then select +Trust Relationships, click on the Add button +next to the box that is labeled Trusted Domains. A panel will open in which +must be entered the name of the remote domain as well as the password assigned to that trust. +

    Inter-Domain Trust Facilities

    + A two-way trust relationship is created when two one-way trusts are created, one in each direction. Where a one-way trust has been established between two MS Windows NT4 domains (let's call them -DomA and DomB) the following facilities are created: -

    Figure 16.1. Trusts overview

    Trusts overview
    • - DomA (completes the trust connection) Trusts DomB +DomA and DomB), the following facilities are created: +

      Figure 16.1. Trusts overview.

      Trusts overview.
      • + DomA (completes the trust connection) Trusts DomB.

      • - DomA is the Trusting domain + DomA is the Trusting domain.

      • - DomB is the Trusted domain (originates the trust account) + DomB is the Trusted domain (originates the trust account).

      • - Users in DomB can access resources in DomA + Users in DomB can access resources in DomA.

      • - Users in DomA can NOT access resources in DomB + Users in DomA cannot access resources in DomB.

      • - Global groups from DomB CAN be used in DomA + Global groups from DomB can be used in DomA.

      • - Global groups from DomA can NOT be used in DomB + Global groups from DomA cannot be used in DomB.

      • - DomB DOES appear in the logon dialog box on client workstations in DomA + DomB does appear in the logon dialog box on client workstations in DomA.

      • - DomA does NOT appear in the logon dialog box on client workstations in DomB + DomA does not appear in the logon dialog box on client workstations in DomB.

      • - Users / Groups in a trusting domain can NOT be granted rights, permissions or access + Users/Groups in a trusting domain cannot be granted rights, permissions or access to a trusted domain.

      • - The trusting domain CAN access and use accounts (Users / Global Groups) in the + The trusting domain can access and use accounts (Users/Global Groups) in the trusted domain.

      • - Administrators of the trusted domain CAN be granted admininstrative rights in the + Administrators of the trusted domain can be granted admininstrative rights in the trusting domain.

      • - Users in a trusted domain CAN be given rights and privileges in the trusting + Users in a trusted domain can be given rights and privileges in the trusting domain.

      • - Trusted domain Global Groups CAN be given rights and permissions in the trusting + Trusted domain Global Groups can be given rights and permissions in the trusting domain.

      • - Global Groups from the trusted domain CAN be made members in Local Groups on - MS Windows domain member machines. -

    Configuring Samba NT-style Domain Trusts

    + Global Groups from the trusted domain can be made members in Local Groups on + MS Windows Domain Member machines. +

    Configuring Samba NT-Style Domain Trusts

    This description is meant to be a fairly short introduction about how to set up a Samba server so -that it could participate in interdomain trust relationships. Trust relationship support in Samba -is in its early stage, so lot of things don't work yet. +that it can participate in interdomain trust relationships. Trust relationship support in Samba +is at an early stage, so do not be surprised if something does not function as it should.

    Each of the procedures described below assumes the peer domain in the trust relationship is -controlled by a Windows NT4 server. However, the remote end could just as well be another +controlled by a Windows NT4 server. However, the remote end could just as well be another Samba-3 domain. It can be clearly seen, after reading this document, that combining Samba-specific parts of what's written below leads to trust between domains in a purely Samba environment.

    Samba as the Trusted Domain

    -In order to set the Samba PDC to be the trusted party of the relationship you first need +In order to set the Samba PDC to be the trusted party of the relationship, you first need to create a special account for the domain that will be the trusting party. To do that, -you can use the 'smbpasswd' utility. Creating the trusted domain account is very +you can use the smbpasswd utility. Creating the trusted domain account is similar to creating a trusted machine account. Suppose, your domain is called SAMBA, and the remote domain is called RUMBA. The first step -will be to issue this command from your favourite shell: +will be to issue this command from your favorite shell:

     root#  smbpasswd -a -i rumba
    @@ -142,82 +140,83 @@ Added user rumba$
     

    where -a means to add a new account into the -passdb database and -i means: ''create this -account with the InterDomain trust flag'' +passdb database and -i means: “create this +account with the InterDomain trust flag”.

    -The account name will be 'rumba$' (the name of the remote domain) +The account name will be “rumba$” (the name of the remote domain).

    -After issuing this command you'll be asked to enter the password for +After issuing this command, you will be asked to enter the password for the account. You can use any password you want, but be aware that Windows NT will -not change this password until 7 days following account creation. +not change this password until seven days following account creation. After the command returns successfully, you can look at the entry for the new account (in the standard way as appropriate for your configuration) and see that account's name is -really RUMBA$ and it has the 'I' flag set in the flags field. Now you're ready to confirm +really RUMBA$ and it has the “I” flag set in the flags field. Now you are ready to confirm the trust by establishing it from Windows NT Server. -

    +

    + Open User Manager for Domains and from the Policies menu, select Trust Relationships.... -Right beside the Trusted domains list box press the +Beside the Trusted domains list box click the Add... button. You will be prompted for the trusted domain name and the relationship password. Type in SAMBA, as this is -the name of the remote domain, and the password used at the time of account creation. -Press OK and, if everything went without incident, you will see -Trusted domain relationship successfully +the name of the remote domain and the password used at the time of account creation. +Click on OK and, if everything went without incident, you will see +the Trusted domain relationship successfully established message. -

    Samba as the Trusting Domain

    +

    Samba as the Trusting Domain

    This time activities are somewhat reversed. Again, we'll assume that your domain -controlled by the Samba PDC is called SAMBA and NT-controlled domain is called RUMBA. +controlled by the Samba PDC is called SAMBA and the NT-controlled domain is called RUMBA.

    The very first step is to add an account for the SAMBA domain on RUMBA's PDC. -

    +

    + Launch the Domain User Manager, then from the menu select Policies, Trust Relationships. Now, next to the Trusted Domains box press the Add -button, and type in the name of the trusted domain (SAMBA) and the password to use in securing +button and type in the name of the trusted domain (SAMBA) and the password to use in securing the relationship.

    The password can be arbitrarily chosen. It is easy to change the password from the Samba server whenever you want. After confirming the password your account is -ready for use. Now it's Samba's turn. +ready for use. Now its Samba's turn.

    -Using your favourite shell while being logged in as root, issue this command: +Using your favorite shell while being logged in as root, issue this command:

    root# net rpc trustdom establish rumba

    You will be prompted for the password you just typed on your Windows NT4 Server box. -Do not worry if you see an error message that mentions a return code of -NT_STATUS_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT. It means the -password you gave is correct and the NT4 Server says the account is -ready for interdomain connection and not for ordinary -connection. After that, be patient; it can take a while (especially -in large networks), but eventually you should see the Success message. -Congratulations! Your trust relationship has just been established. +An error message `NT_STATUS_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT' +that may be reported periodically is of no concern and may safely be ignored. +It means the password you gave is correct and the NT4 Server says the account is ready for +interdomain connection and not for ordinary connection. After that, be patient; +it can take a while (especially in large networks), but eventually you should see +the Success message. Congratulations! Your trust +relationship has just been established.

    Note

    -Note that you have to run this command as root because you must have write access to +You have to run this command as root because you must have write access to the secrets.tdb file. -

    NT4-style Domain Trusts with Windows 2000

    +

    NT4-Style Domain Trusts with Windows 2000

    Although Domain User Manager is not present in Windows 2000, it is also possible to establish an NT4-style trust relationship with a Windows 2000 domain -controller running in mixed mode as the trusting server. It should also be possible for +controller running in mixed mode as the trusting server. It should also be possible for Samba to trust a Windows 2000 server, however, more testing is still needed in this area.

    -After creating the interdomain trust account on the -Samba server as described above, open Active Directory Domains and +After as described above, open Active Directory Domains and Trusts on the AD controller of the domain whose resources you wish Samba users -to have access to. Remember that since NT4-style trusts are not transitive, if you want +to have access to. Remember that since NT4-style trusts are not transitive, if you want your users to have access to multiple mixed-mode domains in your AD forest, you will need to -repeat this process for each of those domains. With Active Directory Domains +repeat this process for each of those domains. With Active Directory Domains and Trusts open, right-click on the name of the Active Directory domain that -will trust our Samba domain and choose Properties, then click on -the Trusts tab. In the upper part of the panel, you will see a list box -labelled Domains trusted by this domain:, and an -Add... button next to it. Press this button, and just as with NT4, you -will be prompted for the trusted domain name and the relationship password. Press OK, and +will trust our Samba domain and choose Properties, then click on +the Trusts tab. In the upper part of the panel, you will see a list box +labeled Domains trusted by this domain:, and an +Add... button next to it. Press this button and just as with NT4, you +will be prompted for the trusted domain name and the relationship password. Press OK and after a moment, Active Directory will respond with The trusted domain has been added and the trust has been verified. Your Samba users can now be granted acess to resources in the AD domain. -

    Common Errors

    -Interdomain trust relationships should NOT be attempted on networks that are unstable +

    Common Errors

    +Interdomain trust relationships should not be attempted on networks that are unstable or that suffer regular outages. Network stability and integrity are key concerns with distributed trusted domains. -

    +

    diff --git a/docs/htmldocs/IntroSMB.html b/docs/htmldocs/IntroSMB.html index 51a22f14fa..5e3796fdeb 100644 --- a/docs/htmldocs/IntroSMB.html +++ b/docs/htmldocs/IntroSMB.html @@ -1,5 +1,5 @@ -Chapter 1. Introduction to Samba

    Chapter 1. Introduction to Samba

    David Lechnyr

    Unofficial HOWTO

    April 14, 2003

    -"If you understand what you're doing, you're not learning anything." +Chapter 1. Introduction to Samba

    Chapter 1. Introduction to Samba

    David Lechnyr

    Unofficial HOWTO

    April 14, 2003

    +"If you understand what you're doing, you're not learning anything." -- Anonymous

    Samba is a file and print server for Windows-based clients using TCP/IP as the underlying @@ -7,7 +7,7 @@ transport protocol. In fact, it can support any SMB/CIFS-enabled client. One of strengths is that you can use it to blend your mix of Windows and Linux machines together without requiring a separate Windows NT/2000/2003 Server. Samba is actively being developed by a global team of about 30 active programmers and was originally developed by Andrew Tridgell. -

    Background

    +

    Background

    Once long ago, there was a buzzword referred to as DCE/RPC. This stood for Distributed Computing Environment/Remote Procedure Calls and conceptually was a good idea. It was originally developed by Apollo/HP as NCA 1.0 (Network Computing Architecture) and only @@ -15,12 +15,12 @@ ran over UDP. When there was a need to run it over TCP so that it would be compa with DECnet 3.0, it was redesigned, submitted to The Open Group, and officially became known as DCE/RPC. Microsoft came along and decided, rather than pay $20 per seat to license this technology, to reimplement DCE/RPC themselves as MSRPC. From this, the -concept continued in the form of SMB (Server Message Block, or the "what") using the -NetBIOS (Network Basic Input/Output System, or the "how") compatibility layer. You can +concept continued in the form of SMB (Server Message Block, or the "what") using the +NetBIOS (Network Basic Input/Output System, or the "how") compatibility layer. You can run SMB (i.e., transport) over several different protocols; many different implementations arose as a result, including NBIPX (NetBIOS over IPX, NwLnkNb, or NWNBLink) and NBT (NetBIOS over TCP/IP, or NetBT). As the years passed, NBT became the most common form -of implementation until the advance of "Direct-Hosted TCP" -- the Microsoft marketing +of implementation until the advance of "Direct-Hosted TCP" -- the Microsoft marketing term for eliminating NetBIOS entirely and running SMB by itself across TCP port 445 only. As of yet, direct-hosted TCP has yet to catch on.

    @@ -33,23 +33,23 @@ been dutifully waded through during the information-gathering stages of this pro are *still* many missing pieces... While often tedious, at least the way has been generously littered with occurrences of clapping hand to forehead and muttering 'crikey, what are they thinking? -

    Terminology

    • - SMB: Acronym for "Server Message Block". This is Microsoft's file and printer sharing protocol. +

    Terminology

    • + SMB: Acronym for "Server Message Block". This is Microsoft's file and printer sharing protocol.

    • - CIFS: Acronym for "Common Internet File System". Around 1996, Microsoft apparently - decided that SMB needed the word "Internet" in it, so they changed it to CIFS. + CIFS: Acronym for "Common Internet File System". Around 1996, Microsoft apparently + decided that SMB needed the word "Internet" in it, so they changed it to CIFS.

    • Direct-Hosted: A method of providing file/printer sharing services over port 445/tcp only using DNS for name resolution instead of WINS.

    • - IPC: Acronym for "Inter-Process Communication". A method to communicate specific + IPC: Acronym for "Inter-Process Communication". A method to communicate specific information between programs.

    • Marshalling: - A method of serializing (i.e., sequential ordering of) variable data suitable for transmission via a network connection or storing in a file. The source data can be re-created using a similar process called unmarshalling.

    • - NetBIOS: Acronym for "Network Basic Input/Output System". This is not a protocol; + NetBIOS: Acronym for "Network Basic Input/Output System". This is not a protocol; it is a method of communication across an existing protocol. This is a standard which was originally developed for IBM by Sytek in 1983. To exaggerate the analogy a bit, it can help to think of this in comparison your computer's BIOS -- it controls the @@ -60,15 +60,15 @@ thinking? brilliant people tend to interchange NetBIOS with terms like NetBEUI without a second thought; this will cause no end (and no doubt) of confusion.

    • - NetBEUI: Acronym for the "NetBIOS Extended User Interface". Unlike NetBIOS, NetBEUI + NetBEUI: Acronym for the "NetBIOS Extended User Interface". Unlike NetBIOS, NetBEUI is a protocol, not a standard. It is also not routable, so traffic on one side of a router will be unable to communicate with the other side. Understanding NetBEUI is not essential to deciphering SMB; however it helps to point out that it is not the same as NetBIOS and to improve your score in trivia at parties. NetBEUI was originally - referred to by Microsoft as "NBF", or "The Windows NT NetBEUI Frame protocol driver". + referred to by Microsoft as "NBF", or "The Windows NT NetBEUI Frame protocol driver". It is not often heard from these days.

    • - NBT: Acronym for "NetBIOS over TCP"; also known as "NetBT". Allows the continued use + NBT: Acronym for "NetBIOS over TCP"; also known as "NetBT". Allows the continued use of NetBIOS traffic proxied over TCP/IP. As a result, NetBIOS names are made to IP addresses and NetBIOS name types are conceptually equivalent to TCP/IP ports. This is how file and printer sharing are accomplished in Windows 95/98/ME. They @@ -82,8 +82,8 @@ thinking?

    • W3K: Acronym for Windows 2003 Server

    If you plan on getting help, make sure to subscribe to the Samba Mailing List (available at -http://www.samba.org). -

    Related Projects

    +http://www.samba.org). +

    Related Projects

    There are currently two network filesystem client projects for Linux that are directly related to Samba: SMBFS and CIFS VFS. These are both available in the Linux kernel itself.

    • @@ -103,23 +103,23 @@ Again, it's important to note that these are implementations for client filesyst nothing to do with acting as a file and print server for SMB/CIFS clients.

      There are other Open Source CIFS client implementations, such as the -jCIFS project +jCIFS project which provides an SMB client toolkit written in Java. -

    SMB Methodology

    +

    SMB Methodology

    Traditionally, SMB uses UDP port 137 (NetBIOS name service, or netbios-ns), UDP port 138 (NetBIOS datagram service, or netbios-dgm), and TCP port 139 (NetBIOS session service, or netbios-ssn). Anyone looking at their network with a good packet sniffer will be amazed at the amount of traffic generated by just opening up a single file. In general, SMB sessions are established in the following order:

    • - "TCP Connection" - establish 3-way handshake (connection) to port 139/tcp + "TCP Connection" - establish 3-way handshake (connection) to port 139/tcp or 445/tcp.

    • - "NetBIOS Session Request" - using the following "Calling Names": The local + "NetBIOS Session Request" - using the following "Calling Names": The local machine's NetBIOS name plus the 16th character 0x00; The server's NetBIOS name plus the 16th character 0x20

    • - "SMB Negotiate Protocol" - determine the protocol dialect to use, which will + "SMB Negotiate Protocol" - determine the protocol dialect to use, which will be one of the following: PC Network Program 1.0 (Core) - share level security mode only; Microsoft Networks 1.03 (Core Plus) - share level security mode only; Lanman1.0 (LAN Manager 1.0) - uses Challenge/Response @@ -135,9 +135,9 @@ up a single file. In general, SMB sessions are established in the following orde to a service type (e.g., IPC$ named pipe)

    A good way to examine this process in depth is to try out -SecurityFriday's SWB program. +SecurityFriday's SWB program. It allows you to walk through the establishment of a SMB/CIFS session step by step. -

    Epilogue

    +

    Epilogue

    What's fundamentally wrong is that nobody ever had any taste when they did it. Microsoft has been very much into making the user interface look good, but internally it's just a complete mess. And even people who program for Microsoft @@ -161,14 +161,14 @@ halts in the middle of something that shouldn't be strange. Normally it works fine and then once in a blue moon for some completely unknown reason, it's dead, and nobody knows why. Not Microsoft, not the experienced user and certainly not the completely clueless user who probably sits there shivering thinking -"What did I do wrong?" when they didn't do anything wrong at all. +"What did I do wrong?" when they didn't do anything wrong at all.

    -That's what's really irritating to me." +That's what's really irritating to me."

    -- -Linus Torvalds, from an interview with BOOT Magazine, Sept 1998 -

    Miscellaneous

    +Linus Torvalds, from an interview with BOOT Magazine, Sept 1998 +

    Miscellaneous

    This chapter is Copyright 2003 David Lechnyr (david at lechnyr dot com). Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation. A copy of the license is available at http://www.gnu.org/licenses/fdl.txt. -

    +

    diff --git a/docs/htmldocs/NT4Migration.html b/docs/htmldocs/NT4Migration.html index b561492644..878aa5ec22 100644 --- a/docs/htmldocs/NT4Migration.html +++ b/docs/htmldocs/NT4Migration.html @@ -1,76 +1,77 @@ -Chapter 31. Migration from NT4 PDC to Samba-3 PDC

    Chapter 31. Migration from NT4 PDC to Samba-3 PDC

    John H. Terpstra

    Samba Team

    April 3, 2003

    -This is a rough guide to assist those wishing to migrate from NT4 domain control to -Samba-3 based domain control. -

    Planning and Getting Started

    +Chapter 31. Migration from NT4 PDC to Samba-3 PDC

    Chapter 31. Migration from NT4 PDC to Samba-3 PDC

    John H. Terpstra

    Samba Team

    April 3, 2003

    +This is a rough guide to assist those wishing to migrate from NT4 Domain Control to +Samba-3-based Domain Control. +

    Planning and Getting Started

    In the IT world there is often a saying that all problems are encountered because of poor planning. The corollary to this saying is that not all problems can be anticipated -and planned for. Then again, good planning will anticipate most show stopper type situations. +and planned for. Then again, good planning will anticipate most show-stopper-type situations.

    -Those wishing to migrate from MS Windows NT4 domain control to a Samba-3 domain control +Those wishing to migrate from MS Windows NT4 Domain Control to a Samba-3 Domain Control environment would do well to develop a detailed migration plan. So here are a few pointers to help migration get under way. -

    Objectives

    -The key objective for most organisations will be to make the migration from MS Windows NT4 -to Samba-3 domain control as painless as possible. One of the challenges you may experience +

    Objectives

    +The key objective for most organizations will be to make the migration from MS Windows NT4 +to Samba-3 Domain Control as painless as possible. One of the challenges you may experience in your migration process may well be one of convincing management that the new environment should remain in place. Many who have introduced open source technologies have experienced -pressure to return to a Microsoft based platform solution at the first sign of trouble. +pressure to return to a Microsoft-based platform solution at the first sign of trouble.

    -Before attempting a migration to a Samba-3 controlled network make every possible effort to -gain all-round commitment to the change. Know precisely why the change -is important for the organisation. Possible motivations to make a change include: -

    • Improve network manageability

    • Obtain better user level functionality

    • Reduce network operating costs

    • Reduce exposure caused by Microsoft withdrawal of NT4 support

    • Avoid MS License 6 implications

    • Reduce organisation's dependency on Microsoft

    -Make sure that everyone knows that Samba-3 is NOT MS Windows NT4. Samba-3 offers -an alternative solution that is both different from MS Windows NT4 and that offers +Before attempting a migration to a Samba-3 controlled network, make every possible effort to +gain all-round commitment to the change. Know precisely why the change +is important for the organization. Possible motivations to make a change include: +

    • Improve network manageability.

    • Obtain better user level functionality.

    • Reduce network operating costs.

    • Reduce exposure caused by Microsoft withdrawal of NT4 support.

    • Avoid MS License 6 implications.

    • Reduce organization's dependency on Microsoft.

    +Make sure everyone knows that Samba-3 is not MS Windows NT4. Samba-3 offers +an alternative solution that is both different from MS Windows NT4 and offers advantages compared with it. Gain recognition that Samba-3 lacks many of the features that Microsoft has promoted as core values in migration from MS Windows NT4 to MS Windows 2000 and beyond (with or without Active Directory services).

    -What are the features that Samba-3 can NOT provide? -

    • Active Directory Server

    • Group Policy Objects (in Active Directory)

    • Machine Policy objects

    • Logon Scripts in Active Directory

    • Software Application and Access Controls in Active Directory

    -The features that Samba-3 DOES provide and that may be of compelling interest to your site -includes: -

    • Lower Cost of Ownership

    • Global availability of support with no strings attached

    • Dynamic SMB Servers (ie:Can run more than one server per Unix/Linux system)

    • Creation of on-the-fly logon scripts

    • Creation of on-the-fly Policy Files

    • Greater Stability, Reliability, Performance and Availability

    • Manageability via an ssh connection

    • Flexible choices of back-end authentication technologies (tdbsam, ldapsam, mysqlsam)

    • Ability to implement a full single-sign-on architecture

    • Ability to distribute authentication systems for absolute minimum wide area network bandwidth demand

    -Before migrating a network from MS Windows NT4 to Samba-3 consider all necessary factors. Users -should be educated about changes they may experience so that the change will be a welcome one +What are the features that Samba-3 cannot provide? +

    • Active Directory Server.

    • Group Policy Objects (in Active Directory).

    • Machine Policy Objects.

    • Logon Scripts in Active Directory.

    • Software Application and Access Controls in Active Directory.

    +The features that Samba-3 does provide and that may be of compelling interest to your site +include: +

    • Lower cost of ownership.

    • Global availability of support with no strings attached.

    • Dynamic SMB Servers (can run more than one SMB/CIFS server per UNIX/Linux system).

    • Creation of on-the-fly logon scripts.

    • Creation of on-the-fly Policy Files.

    • Greater stability, reliability, performance and availability.

    • Manageability via an ssh connection.

    • Flexible choices of back-end authentication technologies (tdbsam, ldapsam, mysqlsam).

    • Ability to implement a full single-sign-on architecture.

    • Ability to distribute authentication systems for absolute minimum wide area network bandwidth demand.

    +Before migrating a network from MS Windows NT4 to Samba-3, consider all necessary factors. Users +should be educated about changes they may experience so the change will be a welcome one and not become an obstacle to the work they need to do. The following are factors that will help ensure a successful migration: -

    Domain Layout

    -Samba-3 can be configured as a domain controller, a back-up domain controller (probably best called -a secondary controller), a domain member, or as a stand-alone server. The Windows network security +

    Domain Layout

    +Samba-3 can be configured as a Domain Controller, a back-up Domain Controller (probably best called +a secondary controller), a Domain Member, or as a stand-alone Server. The Windows network security domain context should be sized and scoped before implementation. Particular attention needs to be -paid to the location of the primary domain controller (PDC) as well as backup controllers (BDCs). +paid to the location of the primary Domain Controller (PDC) as well as backup controllers (BDCs). One way in which Samba-3 differs from Microsoft technology is that if one chooses to use an LDAP -authentication backend then the same database can be used by several different domains. In a -complex organisation there can be a single LDAP database, which itself can be distributed (ie: Have +authentication backend, then the same database can be used by several different domains. In a +complex organization, there can be a single LDAP database, which itself can be distributed (have a master server and multiple slave servers) that can simultaneously serve multiple domains.

    -From a design perspective, the number of users per server, as well as the number of servers, per +>From a design perspective, the number of users per server as well as the number of servers per domain should be scaled taking into consideration server capacity and network bandwidth.

    A physical network segment may house several domains. Each may span multiple network segments. Where domains span routed network segments, consider and test the performance implications of -the design and layout of a network. A Centrally located domain controller that is designed to +the design and layout of a network. A centrally located Domain Controller that is designed to serve multiple routed network segments may result in severe performance problems. Check the -response time (eg: ping timing) between the remote segment and the PDC. If long (more than 100 ms) -locate a backup controller (BDC) on the remote segmanet to serve as the local authentication and +response time (ping timing) between the remote segment and the PDC. If +it's long (more than 100 ms), +locate a backup controller (BDC) on the remote segment to serve as the local authentication and access control server. -

    Server Share and Directory Layout

    -There are cardinal rules to effective network design. These can not be broken with impunity. -The most important rule: Simplicity is king in every well controlled network. Every part of -the infrastructure must be managed, the more complex it is, the greater will be the demand +

    Server Share and Directory Layout

    +There are cardinal rules to effective network design that cannot be broken with impunity. +The most important rule: Simplicity is king in every well-controlled network. Every part of +the infrastructure must be managed; the more complex it is, the greater will be the demand of keeping systems secure and functional.

    -Keep in mind the nature of how data must be share. Physical disk space layout should be considered +Keep in mind the nature of how data must be shared. Physical disk space layout should be considered carefully. Some data must be backed up. The simpler the disk layout the easier it will be to -keep track of backed needs. Identify what back media will be meet needs, consider backup to tape -, CD-ROM or (DVD-ROM), or other off-line storage medium. Plan and implement for minimum -maintenance. Leave nothing to chance in your design, above all, do not leave backups to chance: -Backup and test, validate every backup, create a disaster recovery plan and prove that it works. +keep track of backup needs. Identify what backup media will meet your needs; consider backup to tape, +CD-ROM or (DVD-ROM), or other offline storage medium. Plan and implement for minimum +maintenance. Leave nothing to chance in your design; above all, do not leave backups to chance: +Backup, test, and validate every backup, create a disaster recovery plan and prove that it works.

    Users should be grouped according to data access control needs. File and directory access -is best controlled via group permissions and the use of the "sticky bit" on group controlled -directories may substantially avoid file access complaints from samba share users. +is best controlled via group permissions and the use of the “sticky bit” on group controlled +directories may substantially avoid file access complaints from Samba share users.

    Inexperienced network administrators often attempt elaborate techniques to set access controls on files, directories, shares, as well as in share definitions. @@ -78,101 +79,123 @@ Keep your design and implementation simple and document your design extensively. audit your documentation. Do not create a complex mess that your successor will not understand. Remember, job security through complex design and implementation may cause loss of operations and downtime to users as the new administrator learns to untangle your knots. Keep access -controls simple and effective and make sure that users will never be interrupted by stupid +controls simple and effective and make sure that users will never be interrupted by obtuse complexity. -

    Logon Scripts

    -Logon scripts can help to ensure that all users gain share and printer connections they need. +

    Logon Scripts

    +Logon scripts can help to ensure that all users gain the share and printer connections they need.

    -Logon scripts can be created 'on-the-fly' so that all commands executed are specific to the -rights and priviliges granted to the user. The preferred controls should be affected through -group membership so that group information can be used to custom create a logon script using -the root preexec parameters to the NETLOGON share. +Logon scripts can be created on-the-fly so all commands executed are specific to the +rights and privileges granted to the user. The preferred controls should be affected through +group membership so group information can be used to create a custom logon script using +the root preexec parameters to the NETLOGON share.

    Some sites prefer to use a tool such as kixstart to establish a controlled -user environment. In any case you may wish to do a google search for logon script process controls. -In particular, you may wish to explore the use of the Microsoft knowledgebase article KB189105 that +user environment. In any case, you may wish to do a Google search for logon script process controls. +In particular, you may wish to explore the use of the Microsoft KnowledgeBase article KB189105 that deals with how to add printers without user intervention via the logon script process. -

    Profile Migration/Creation

    +

    Profile Migration/Creation

    User and Group Profiles may be migrated using the tools described in the section titled Desktop Profile Management.

    + Profiles may also be managed using the Samba-3 tool profiles. This tool allows -the MS Windows NT style security identifiers (SIDs) that are stored inside the profile NTuser.DAT file +the MS Windows NT-style security identifiers (SIDs) that are stored inside the profile NTuser.DAT file to be changed to the SID of the Samba-3 domain. -

    User and Group Accounts

    +

    User and Group Accounts

    It is possible to migrate all account settings from an MS Windows NT4 domain to Samba-3. Before -attempting to migrate user and group accounts it is STRONGLY advised to create in Samba-3 the -groups that are present on the MS Windows NT4 domain AND to map these to -suitable Unix/Linux groups. By following this simple advice all user and group attributes +attempting to migrate user and group accounts, it is STRONGLY advised to create in Samba-3 the +groups that are present on the MS Windows NT4 domain AND to map them to +suitable UNIX/Linux groups. By following this simple advice, all user and group attributes should migrate painlessly. -

    Steps In Migration Process

    +

    Steps in Migration Process

    The approximate migration process is described below.

    • -You will have an NT4 PDC that has the users, groups, policies and profiles to be migrated +You have an NT4 PDC that has the users, groups, policies and profiles to be migrated.

    • -Samba-3 set up as a DC with netlogon share, profile share, etc. Configure the smb.conf file -to fucntion as a BDC. ie: domain master = No. -

    Procedure 31.1. The Account Migration Process

    1. Create a BDC account for the samba server using NT Server Manager

      1. Samba must NOT be running

    2. net rpc join -S NT4PDC -w DOMNAME -U Administrator%passwd

    3. net rpc vampire -S NT4PDC -U administrator%passwd

    4. pdbedit -L

      1. Note - did the users migrate?

    5. +Samba-3 set up as a DC with netlogon share, profile share, and so on. Configure the smb.conf file +to fucntion as a BDC, i.e., domain master = No. +

    Procedure 31.1. The Account Migration Process

    1. + + Create a BDC account in the old NT4 domain for the Samba server using NT Server Manager.

      1. Samba must not be running.

    2. + + net rpc join -S NT4PDC -w DOMNAME -U Administrator%passwd

    3. net rpc vampire -S NT4PDC -U administrator%passwd

    4. pdbedit -L

      1. Note did the users migrate?

    5. + + Now assign each of the UNIX groups to NT groups: - (Note: It may be useful to copy this text to a script called - initGroups.sh) + (It may be useful to copy this text to a script called initGroups.sh)

       #!/bin/bash
       #### Keep this as a shell script for future re-use
       			
       # First assign well known domain global groups
      -net groupmap modify ntgroup="Domain Admins" unixgroup=ntadmins
      -net groupmap modify ntgroup="Domain Guests" unixgroup=nobody
      -net groupmap modify ntgroup="Domain Users" unixgroup=users
      +net groupmap modify ntgroup="Domain Admins" unixgroup=root   rid=512
      +net groupmap modify ntgroup="Domain Users"  unixgroup=users  rid=513
      +net groupmap modify ntgroup="Domain Guests" unixgroup=nobody rid=514
       
       # Now for our added domain global groups
      -net groupmap add ntgroup="Designers" unixgroup=designers type=d rid=3200
      -net groupmap add ntgroup="Engineers" unixgroup=engineers type=d rid=3210
      -net groupmap add ntgroup="QA Team"   unixgroup=qateam    type=d rid=3220
      +net groupmap add ntgroup="Designers" unixgroup=designers type=d rid=3200
      +net groupmap add ntgroup="Engineers" unixgroup=engineers type=d rid=3210
      +net groupmap add ntgroup="QA Team"   unixgroup=qateam    type=d rid=3220
       

      -

    6. net groupmap list

      1. Now check that all groups are recognised

    -Now migrate all the profiles, then migrate all policy files. -

    Migration Options

    -Sites that wish to migrate from MS Windows NT4 Domain Control to a Samba based solution -generally fit into three basic categories. -

    Table 31.1. The 3 Major Site Types

    Number of UsersDescription
    < 50

    Want simple conversion with NO pain

    50 - 250

    Want new features, can manage some in-house complexity

    > 250

    Solution/Implementation MUST scale well, complex needs. Cross departmental decision process. Local expertise in most areas

    Planning for Success

    +

  • net groupmap list

    1. Check that all groups are recognized.

  • +Migrate all the profiles, then migrate all policy files. +

    Migration Options

    +Sites that wish to migrate from MS Windows NT4 Domain Control to a Samba-based solution +generally fit into three basic categories. shows the possibilities. +

    Table 31.1. The Three Major Site Types

    Number of UsersDescription
    < 50

    Want simple conversion with no pain.

    50 - 250

    Want new features, can manage some in-house complexity.

    > 250

    Solution/Implementation must scale well, complex needs. Cross-departmental decision process. Local expertise in most areas.

    Planning for Success

    There are three basic choices for sites that intend to migrate from MS Windows NT4 -to Samba-3. +to Samba-3:

    • - Simple Conversion (total replacement) + Simple conversion (total replacement).

    • - Upgraded Conversion (could be one of integration) + Upgraded conversion (could be one of integration).

    • - Complete Redesign (completely new solution) + Complete redesign (completely new solution).

    -Minimise down-stream problems by: +Minimize down-stream problems by:

    • - Take sufficient time + Taking sufficient time.

    • - Avoid Panic + Avoiding Panic.

    • - Test ALL assumptions + Testing all assumptions.

    • - Test full roll-out program, including workstation deployment -

    Table 31.2. Nature of the Conversion Choices

    SimpleUpgradedRedesign

    Make use of minimal OS specific features

    Translate NT4 features to new host OS features

    Decide:

    Suck all accounts from NT4 into Samba-3

    Copy and improve:

    Authentication Regime (database location and access)

    Make least number of operational changes

    Make progressive improvements

    Desktop Management Methods

    Take least amount of time to migrate

    Minimise user impact

    Better Control of Desktops / Users

    Live versus Isolated Conversion

    Maximise functionality

    Identify Needs for: Manageability, Scalability, Security, Availability

    Integrate Samba-3 then migrate while users are active, then Change of control (ie: swap out)

    Take advantage of lower maintenance opportunity

    Samba-3 Implementation Choices

    Authentication database/back end:

    + Testing the full roll-out program, including workstation deployment. +

    lists the conversion choices given the type of migration +being contemplated. +

    Table 31.2. Nature of the Conversion Choices

    SimpleUpgradedRedesign

    Make use of minimal OS specific features.

    Translate NT4 features to new host OS features.

    Decide:

    Move all accounts from NT4 into Samba-3

    Copy and improve

    Authentication regime (database location and access)

    Make least number of operational changes

    Make progressive improvements

    Desktop management methods

    Take least amount of time to migrate

    Minimize user impact

    Better control of Desktops/Users

    Live versus isolated conversion

    Maximize functionality

    Identify Needs for: Manageability, Scalability, Security, Availability

    Integrate Samba-3 then migrate while users are active, then change of control (swap out)

    Take advantage of lower maintenance opportunity

    Samba-3 Implementation Choices

    Authentication Database/Backend

    Samba-3 can use an external authentication backend:

    -

    • Winbind (external Samba or NT4/200x server)

    • External server could use Active Directory or NT4 Domain

    • Can use pam_mkhomedir.so to auto-create home dirs

    -

    - Samba-3 can use a local authentication backend: -

    • smbpasswd, tdbsam, ldapsam, mysqlsam

    -

    Access Control Points:
    • On the Share itself - using Share ACLs

    • On the file system - using UNIX permissions on files and directories

      Note: Can Enable Posix ACLs in file system also

    • Through Samba share parameters - Not recommended - except as last resort

    Policies (migrate or create new ones):
    • Using Group Policy Editor (NT4)

    • - Watch out for Tattoo effect

    User and Group Profiles:

    - Platform specific so use platform tool to change from a Local to a Roaming profile - Can use new profiles tool to change SIDs (NTUser.DAT) -

    Logon Scripts:

    - Know how they work -

    User and Group mapping to Unix/Linux:
    • username map facility may be needed

    • Use 'net groupmap' to connect NT4 groups to Unix groups

    • Use pdbedit to set/change user configuration

      - NOTE: When migrating to LDAP back, end it may be easier to dump initial - LDAP database to LDIF, then edit, then reload into LDAP -

    OS specific scripts/programs may be needed:
    • Add/Delete Users: Note OS limits on size of name - (Linux 8 chars) NT4 up to 254 chars

    • Add/Delete Machines: Applied only to domain members - (Note: Machine names may be limited to 16 characters)

    • Use 'net groupmap' to connect NT4 groups to Unix groups

    • Add/Delete Groups: Note OS limits on size and nature. - Linux limit is 16 char, no spaces and no upper case chars (groupadd)

    Migration Tools:

    +

    • Winbind (external Samba or NT4/200x server).

    • External server could use Active Directory or NT4 Domain.

    • Can use pam_mkhomedir.so to auto-create home dirs.

    • + Samba-3 can use a local authentication backend: smbpasswd, tdbsam, ldapsam, mysqlsam

    +

    Access Control Points

    + Samba permits Access Control Points to be set: +

    • On the share itself using Share ACLs.

    • On the file system using UNIX permissions on files and directories.

      Note: Can enable Posix ACLs in file system also.

    • Through Samba share parameters not recommended except as last resort.

    Policies (migrate or create new ones)

    + Exercise great caution when affecting registry changes, use the right tool and be aware + that changes made through NT4-style NTConfig.POL files can leave + permanent changes. +

    • Using Group Policy Editor (NT4).

    • Watch out for Tattoo effect.

    User and Group Profiles

    + Platform-specific so use platform tool to change from a Local to a Roaming profile. + Can use new profiles tool to change SIDs (NTUser.DAT). +

    Logon Scripts

    + Know how they work. +

    User and Group Mapping to UNIX/Linux

    + + User and Group mapping code is new. Many problems have been experienced as network administrators + who are familiar with Samba-2.2.x migrate to Samba-3. Carefully study the chapters that document + the new password backend behavior and the new group mapping functionality. +

    • The username map facility may be needed.

    • Use net groupmap to connect NT4 groups to UNIX groups.

    • Use pdbedit to set/change user configuration.

      + When migrating to LDAP backend, it may be easier to dump the initial + LDAP database to LDIF, edit, then reload into LDAP. +

    OS Specific Scripts/Programs may be Needed

    + Every operating system has its peculiarities. These are the result of engineering decisions + that were based on the experience of the designer, and may have side-effects that were not + anticipated. Limitations that may bite the Windows network administrator include: +

    • Add/Delete Users: Note OS limits on size of name + (Linux 8 chars) NT4 up to 254 chars.

    • Add/Delete Machines: Applied only to Domain Members + (Note: machine names may be limited to 16 characters).

    • Use net groupmap to connect NT4 groups to UNIX groups.

    • Add/Delete Groups: Note OS limits on size and nature. + Linux limit is 16 char, no spaces and no upper case chars (groupadd).

    Migration Tools

    + Domain Control (NT4 Style) Profiles, Policies, Access Controls, Security -

    • Samba: net, rpcclient, smbpasswd, pdbedit, profiles

    • Windows: NT4 Domain User Manager, Server Manager (NEXUS)

    -

    +

    • Samba: net, rpcclient, smbpasswd, pdbedit, profiles.

    • Windows: NT4 Domain User Manager, Server Manager (NEXUS)

    +

    diff --git a/docs/htmldocs/NetworkBrowsing.html b/docs/htmldocs/NetworkBrowsing.html index 4507c0067f..ffe96d2471 100644 --- a/docs/htmldocs/NetworkBrowsing.html +++ b/docs/htmldocs/NetworkBrowsing.html @@ -1,192 +1,196 @@ -Chapter 10. Samba / MS Windows Network Browsing Guide

    Chapter 10. Samba / MS Windows Network Browsing Guide

    John H. Terpstra

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    July 5, 1998

    Updated: April 21, 2003

    +Chapter 10. Network Browsing

    Chapter 10. Network Browsing

    John H. Terpstra

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    July 5, 1998

    Updated: April 21, 2003

    This document contains detailed information as well as a fast track guide to -implementing browsing across subnets and / or across workgroups (or domains). +implementing browsing across subnets and/or across workgroups (or domains). WINS is the best tool for resolution of NetBIOS names to IP addresses. WINS is -NOT involved in browse list handling except by way of name to address resolution. +not involved in browse list handling except by way of name to address resolution.

    Note

    -MS Windows 2000 and later can be configured to operate with NO NetBIOS -over TCP/IP. Samba-3 and later also supports this mode of operation. -When the use of NetBIOS over TCP/IP has been disabled then the primary +MS Windows 2000 and later versions can be configured to operate with no NetBIOS +over TCP/IP. Samba-3 and later versions also support this mode of operation. +When the use of NetBIOS over TCP/IP has been disabled, the primary means for resolution of MS Windows machine names is via DNS and Active Directory. The following information assumes that your site is running NetBIOS over TCP/IP. -

    Features and Benefits

    -Someone once referred to the past in terms of: They were the worst of times, -they were the best of times. The more we look back, them more we long for what was and -hope it never returns!. -

    +

    Features and Benefits

    +Someone once referred to the past in these words “It was the best of times, +it was the worst of times.” The more we look back, the more we long for what was and +hope it never returns. +

    + For many MS Windows network administrators, that statement sums up their feelings about NetBIOS networking precisely. For those who mastered NetBIOS networking, its fickle nature was just par for the course. For those who never quite managed to tame its lusty features, NetBIOS is like Paterson's Curse.

    -For those not familiar with botanical problems in Australia: Paterson's curse, -Echium plantagineum, was introduced to Australia from Europe during the mid-nineteenth +For those not familiar with botanical problems in Australia, Paterson's Curse, +Echium plantagineum, was introduced to Australia from Europe during the mid-nineteenth century. Since then it has spread rapidly. The high seed production, with densities of -thousands of seeds per square metre, a seed longevity of more than seven years, and an +thousands of seeds per square meter, a seed longevity of more than seven years, and an ability to germinate at any time of year, given the right conditions, are some of the features which make it such a persistent weed.

    -In this chapter we explore vital aspects of SMB (Server Message Block) networking with +In this chapter we explore vital aspects of Server Message Block (SMB) networking with a particular focus on SMB as implemented through running NetBIOS (Network Basic -Input / Output System) over TCP/IP. Since Samba does NOT implement SMB or NetBIOS over -any other protocols we need to know how to configure our network environment and simply +Input/Output System) over TCP/IP. Since Samba does not implement SMB or NetBIOS over +any other protocols, we need to know how to configure our network environment and simply remember to use nothing but TCP/IP on all our MS Windows network clients.

    Samba provides the ability to implement a WINS (Windows Internetworking Name Server) and implements extensions to Microsoft's implementation of WINS. These extensions -help Samba to affect stable WINS operations beyond the normal scope of MS WINS. +help Samba to effect stable WINS operations beyond the normal scope of MS WINS.

    -Please note that WINS is exclusively a service that applies only to those systems -that run NetBIOS over TCP/IP. MS Windows 200x / XP have the capacity to turn off -support for NetBIOS, in which case WINS is of no relevance. Samba supports this also. +WINS is exclusively a service that applies only to those systems +that run NetBIOS over TCP/IP. MS Windows 200x/XP have the capacity to operate with +support for NetBIOS disabled, in which case WINS is of no relevance. Samba supports this also.

    -For those networks on which NetBIOS has been disabled (ie: WINS is NOT required) +For those networks on which NetBIOS has been disabled (i.e., WINS is not required) the use of DNS is necessary for host name resolution. -

    What is Browsing?

    -To most people browsing means that they can see the MS Windows and Samba servers +

    What Is Browsing?

    +To most people browsing means they can see the MS Windows and Samba servers in the Network Neighborhood, and when the computer icon for a particular server is clicked, it opens up and shows the shares and printers available on the target server.

    -What seems so simple is in fact a very complex interaction of different technologies. -The technologies (or methods) employed in making all of this work includes: -

    • MS Windows machines register their presence to the network

    • Machines announce themselves to other machines on the network

    • One or more machine on the network collates the local announcements

    • The client machine finds the machine that has the collated list of machines

    • The client machine is able to resolve the machine names to IP addresses

    • The client machine is able to connect to a target machine

    +What seems so simple is in fact a complex interaction of different technologies. +The technologies (or methods) employed in making all of this work include: +

    • MS Windows machines register their presence to the network.
    • Machines announce themselves to other machines on the network.
    • One or more machine on the network collates the local announcements.
    • The client machine finds the machine that has the collated list of machines.
    • The client machine is able to resolve the machine names to IP addresses.
    • The client machine is able to connect to a target machine.

    The Samba application that controls browse list management and name resolution is called nmbd. The configuration parameters involved in nmbd's operation are: -

    Browsing options: os level(*), - lm announce, - lm interval, - preferred master(*), - local master(*), - domain master(*), - browse list, - enhanced browsing. +

    Browsing options: os level(*), + lm announce, + lm interval, + preferred master(*), + local master(*), + domain master(*), + browse list, + enhanced browsing.

    Name Resolution Method: - name resolve order(*). + name resolve order(*).

    WINS options: - dns proxy, - wins proxy, - wins server(*), - wins support(*), - wins hook. -

    + dns proxy, + wins proxy, + wins server(*), + wins support(*), + wins hook. +

    + For Samba, the WINS Server and WINS Support are mutually exclusive options. Those marked with -an '*' are the only options that commonly MAY need to be modified. Even if not one of these -parameters is set nmbd will still do it's job. -

    Discussion

    -Firstly, all MS Windows networking uses SMB (Server Message Block) based messaging. -SMB messaging may be implemented with or without NetBIOS. MS Windows 200x supports -NetBIOS over TCP/IP for backwards compatibility. Microsoft is intent on phasing out NetBIOS -support. -

    NetBIOS over TCP/IP

    -Samba implements NetBIOS, as does MS Windows NT / 200x / XP, by encapsulating it over TCP/IP. -MS Windows products can do likewise. NetBIOS based networking uses broadcast messaging to -affect browse list management. When running NetBIOS over TCP/IP, this uses UDP based messaging. +an (*) are the only options that commonly may need to be modified. Even if none of these +parameters is set, nmbd will still do its job. +

    Discussion

    +All MS Windows networking uses SMB-based messaging. SMB messaging may be implemented with or without NetBIOS. +MS Windows 200x supports NetBIOS over TCP/IP for backwards compatibility. Microsoft appears intent on phasing +out NetBIOS support. +

    NetBIOS over TCP/IP

    +Samba implements NetBIOS, as does MS Windows NT/200x/XP, by encapsulating it over TCP/IP. +MS Windows products can do likewise. NetBIOS-based networking uses broadcast messaging to +effect browse list management. When running NetBIOS over TCP/IP, this uses UDP-based messaging. UDP messages can be broadcast or unicast. -

    +

    + Normally, only unicast UDP messaging can be forwarded by routers. The -remote announce parameter to smb.conf helps to project browse announcements +remote announce parameter to smb.conf helps to project browse announcements to remote network segments via unicast UDP. Similarly, the -remote browse sync parameter of smb.conf +remote browse sync parameter of smb.conf implements browse list collation using unicast UDP.

    Secondly, in those networks where Samba is the only SMB server technology, -wherever possible nmbd should be configured on one (1) machine as the WINS +wherever possible nmbd should be configured on one machine as the WINS server. This makes it easy to manage the browsing environment. If each network -segment is configured with it's own Samba WINS server, then the only way to -get cross segment browsing to work is by using the -remote announce and the remote browse sync +segment is configured with its own Samba WINS server, then the only way to +get cross-segment browsing to work is by using the + + +remote announce and the remote browse sync parameters to your smb.conf file.

    - -If only one WINS server is used for an entire multi-segment network then -the use of the remote announce and the -remote browse sync parameters should NOT be necessary. + +If only one WINS server is used for an entire multi-segment network, then +the use of the remote announce and the +remote browse sync parameters should not be necessary.

    -As of Samba 3 WINS replication is being worked on. The bulk of the code has -been committed, but it still needs maturation. This is NOT a supported feature + +As of Samba-3 WINS replication is being worked on. The bulk of the code has +been committed, but it still needs maturation. This is not a supported feature of the Samba-3.0.0 release. Hopefully, this will become a supported feature of one of the Samba-3 release series.

    Right now Samba WINS does not support MS-WINS replication. This means that -when setting up Samba as a WINS server there must only be one nmbd +when setting up Samba as a WINS server, there must only be one nmbd configured as a WINS server on the network. Some sites have used multiple Samba WINS servers for redundancy (one server per subnet) and then used -remote browse sync and remote announce -to affect browse list collation across all segments. Note that this means clients +remote browse sync and remote announce +to effect browse list collation across all segments. Note that this means clients will only resolve local names, and must be configured to use DNS to resolve names on other subnets in order to resolve the IP addresses of the servers they can see on other subnets. This setup is not recommended, but is mentioned as a practical -consideration (ie: an 'if all else fails' scenario). +consideration (i.e., an “if all else fails” scenario).

    Lastly, take note that browse lists are a collection of unreliable broadcast messages that are repeated at intervals of not more than 15 minutes. This means that it will take time to establish a browse list and it can take up to 45 -minutes to stabilise, particularly across network segments. -

    TCP/IP - without NetBIOS

    - - - -All TCP/IP using systems use various forms of host name resolution. The primary -methods for TCP/IP hostname resolutions involves either a static file (/etc/hosts -) or DNS (the Domain Name System). DNS is the technology that makes -the Internet usable. DNS based host name resolution is supported by nearly all TCP/IP -enabled systems. Only a few embedded TCP/IP systems do not support DNS. -

    -When an MS Windows 200x / XP system attempts to resolve a host name to an IP address +minutes to stabilize, particularly across network segments. +

    TCP/IP without NetBIOS

    + + + +All TCP/IP-enabled systems use various forms of host name resolution. The primary +methods for TCP/IP hostname resolution involve either a static file (/etc/hosts) +or the Domain Name System (DNS). DNS is the technology that makes +the Internet usable. DNS-based host name resolution is supported by nearly all +TCP/IP-enabled systems. Only a few embedded TCP/IP systems do not support DNS. +

    +When an MS Windows 200x/XP system attempts to resolve a host name to an IP address it follows a defined path:

    1. Checks the hosts file. It is located in - C:\WinNT\System32\Drivers\etc. + C:\Windows NT\System32\Drivers\etc.

    2. - Does a DNS lookup + Does a DNS lookup.

    3. - Checks the NetBIOS name cache + Checks the NetBIOS name cache.

    4. - Queries the WINS server + Queries the WINS server.

    5. - Does a broadcast name lookup over UDP + Does a broadcast name lookup over UDP.

    6. - Looks up entries in LMHOSTS. It is located in - C:\WinNT\System32\Drivers\etc. -

    -Windows 200x / XP can register it's host name with a Dynamic DNS server. You can -force register with a Dynamic DNS server in Windows 200x / XP using: -ipconfig /registerdns + Looks up entries in LMHOSTS. It is located in + C:\Windows NT\System32\Drivers\etc. +

    + +Windows 200x/XP can register its host name with a Dynamic DNS server. You can +force register with a Dynamic DNS server in Windows 200x/XP using: +ipconfig /registerdns.

    With Active Directory (ADS), a correctly functioning DNS server is absolutely essential. In the absence of a working DNS server that has been correctly configured, -MS Windows clients and servers will be totally unable to locate each other, +MS Windows clients and servers will be unable to locate each other, so consequently network services will be severely impaired.

    The use of Dynamic DNS is highly recommended with Active Directory, in which case -the use of BIND9 is preferred for it's ability to adequately support the SRV (service) +the use of BIND9 is preferred for its ability to adequately support the SRV (service) records that are needed for Active Directory. -

    DNS and Active Directory

    -Occasionally we hear from UNIX network administrators who want to use a UNIX based Dynamic +

    DNS and Active Directory

    + +Occasionally we hear from UNIX network administrators who want to use a UNIX-based Dynamic DNS server in place of the Microsoft DNS server. While this might be desirable to some, the MS Windows 200x DNS server is auto-configured to work with Active Directory. It is possible to use BIND version 8 or 9, but it will almost certainly be necessary to create service records -so that MS Active Directory clients can resolve host names to locate essential network services. +so MS Active Directory clients can resolve host names to locate essential network services. The following are some of the default service records that Active Directory requires: -

    • _ldap._tcp.pdc.ms-dcs.Domain

      - This provides the address of the Windows NT PDC for the Domain. -

    • _ldap._tcp.pdc.ms-dcs.DomainTree

      - Resolves the addresses of Global Catalog servers in the domain. -

    • _ldap._tcp.site.sites.writable.ms-dcs.Domain

      - Provides list of domain controllers based on sites. -

    • _ldap._tcp.writable.ms-dcs.Domain

      - Enumerates list of domain controllers that have the writable - copies of the Active Directory data store. -

    • _ldap._tcp.GUID.domains.ms-dcs.DomainTree

      - Entry used by MS Windows clients to locate machines using the - Global Unique Identifier. -

    • _ldap._tcp.Site.gc.ms-dcs.DomainTree

      - Used by MS Windows clients to locate site configuration dependent - Global Catalog server. -

    How Browsing Functions

    +

    _ldap._tcp.pdc.ms-dcs.Domain

    + This provides the address of the Windows NT PDC for the Domain. +

    _ldap._tcp.pdc.ms-dcs.DomainTree

    + Resolves the addresses of Global Catalog servers in the domain. +

    _ldap._tcp.site.sites.writable.ms-dcs.Domain

    + Provides list of Domain Controllers based on sites. +

    _ldap._tcp.writable.ms-dcs.Domain

    + Enumerates list of Domain Controllers that have the writable copies of the Active Directory datastore. +

    _ldap._tcp.GUID.domains.ms-dcs.DomainTree

    + Entry used by MS Windows clients to locate machines using the Global Unique Identifier. +

    _ldap._tcp.Site.gc.ms-dcs.DomainTree

    + Used by MS Windows clients to locate site configuration dependent Global Catalog server. +

    How Browsing Functions

    MS Windows machines register their NetBIOS names -(ie: the machine name for each service type in operation) on start -up. The exact method by which this name registration +(i.e., the machine name for each service type in operation) on start-up. +The exact method by which this name registration takes place is determined by whether or not the MS Windows client/server has been given a WINS server address, whether or not LMHOSTS lookup is enabled, or if DNS for NetBIOS name resolution is enabled, etc. @@ -194,27 +198,27 @@ is enabled, or if DNS for NetBIOS name resolution is enabled, etc. In the case where there is no WINS server, all name registrations as well as name lookups are done by UDP broadcast. This isolates name resolution to the local subnet, unless LMHOSTS is used to list all -names and IP addresses. In such situations Samba provides a means by +names and IP addresses. In such situations, Samba provides a means by which the Samba server name may be forcibly injected into the browse list of a remote MS Windows network (using the -remote announce parameter). +remote announce parameter).

    Where a WINS server is used, the MS Windows client will use UDP unicast to register with the WINS server. Such packets can be routed and thus WINS allows name resolution to function across routed networks.

    During the startup process an election will take place to create a -local master browser if one does not already exist. On each NetBIOS network -one machine will be elected to function as the domain master browser. This -domain browsing has nothing to do with MS security domain control. -Instead, the domain master browser serves the role of contacting each local +Local Master Browser if one does not already exist. On each NetBIOS network +one machine will be elected to function as the Domain Master Browser. This +domain browsing has nothing to do with MS security Domain Control. +Instead, the Domain Master Browser serves the role of contacting each local master browser (found by asking WINS or from LMHOSTS) and exchanging browse list contents. This way every master browser will eventually obtain a complete -list of all machines that are on the network. Every 11-15 minutes an election +list of all machines that are on the network. Every 11 to 15 minutes an election is held to determine which machine will be the master browser. By the nature of the election criteria used, the machine with the highest uptime, or the -most senior protocol version, or other criteria, will win the election -as domain master browser. +most senior protocol version or other criteria, will win the election +as Domain Master Browser.

    Clients wishing to browse the network make use of this list, but also depend on the availability of correct name resolution to the respective IP @@ -224,361 +228,321 @@ Any configuration that breaks name resolution and/or browsing intrinsics will annoy users because they will have to put up with protracted inability to use the network services.

    -Samba supports a feature that allows forced synchronisation -of browse lists across routed networks using the remote browse sync parameter in the smb.conf file. -This causes Samba to contact the local master browser on a remote network and -to request browse list synchronisation. This effectively bridges -two networks that are separated by routers. The two remote -networks may use either broadcast based name resolution or WINS -based name resolution, but it should be noted that the remote browse sync parameter provides browse list synchronisation - and -that is distinct from name to address resolution, in other -words, for cross subnet browsing to function correctly it is -essential that a name to address resolution mechanism be provided. -This mechanism could be via DNS, /etc/hosts, -and so on. -

    Setting up WORKGROUP Browsing

    -To set up cross subnet browsing on a network containing machines -in up to be in a WORKGROUP, not an NT Domain you need to set up one -Samba server to be the Domain Master Browser (note that this is *NOT* +Samba supports a feature that allows forced synchronization of browse lists across +routed networks using the remote browse sync +parameter in the smb.conf file. This causes Samba to contact the local master +browser on a remote network and to request browse list synchronization. This +effectively bridges two networks that are separated by routers. The two remote +networks may use either broadcast-based name resolution or WINS-based name +resolution, but it should be noted that the +remote browse sync parameter provides +browse list synchronization and that is distinct from name to address +resolution. In other words, for cross-subnet browsing to function correctly it is +essential that a name-to-address resolution mechanism be provided. This mechanism +could be via DNS, /etc/hosts, and so on. +

    Configuring WORKGROUP Browsing

    +To configure cross-subnet browsing on a network containing machines +in a WORKGROUP, not an NT Domain, you need to set up one +Samba server to be the Domain Master Browser (note that this is not the same as a Primary Domain Controller, although in an NT Domain the -same machine plays both roles). The role of a Domain master browser is -to collate the browse lists from local master browsers on all the -subnets that have a machine participating in the workgroup. Without -one machine configured as a domain master browser each subnet would -be an isolated workgroup, unable to see any machines on any other -subnet. It is the presence of a domain master browser that makes -cross subnet browsing possible for a workgroup. -

    -In an WORKGROUP environment the domain master browser must be a -Samba server, and there must only be one domain master browser per -workgroup name. To set up a Samba server as a domain master browser, +same machine plays both roles). The role of a Domain Master Browser is +to collate the browse lists from Local Master Browsers on all the +subnets that have a machine participating in the workgroup. Without +one machine configured as a Domain Master Browser, each subnet would +be an isolated workgroup unable to see any machines on another +subnet. It is the presence of a Domain Master Browser that makes +cross-subnet browsing possible for a workgroup. +

    +In a WORKGROUP environment the Domain Master Browser must be a +Samba server, and there must only be one Domain Master Browser per +workgroup name. To set up a Samba server as a Domain Master Browser, set the following option in the [global] section -of the smb.conf file : +of the smb.conf file:

    domain master = yes

    -The domain master browser should also preferably be the local master -browser for its own subnet. In order to achieve this set the following -options in the [global] section of the smb.conf file : -

    -

    Example 10.1. Domain master browser smb.conf

    [global]
    domain master = yes
    local master = yes
    preferred master = yes
    os level = 65

    -

    -The domain master browser may be the same machine as the WINS -server, if you require. -

    -Next, you should ensure that each of the subnets contains a -machine that can act as a local master browser for the -workgroup. Any MS Windows NT/2K/XP/2003 machine should be -able to do this, as will Windows 9x machines (although these -tend to get rebooted more often, so it's not such a good idea -to use these). To make a Samba server a local master browser -set the following options in the [global] section of the -smb.conf file : -

    -

    Example 10.2. Local master browser smb.conf

    [global]
    domain master = no
    local master = yes
    preferred master = yes
    os level = 65

    -

    -Do not do this for more than one Samba server on each subnet, -or they will war with each other over which is to be the local -master browser. -

    -The local master parameter allows Samba to act as a -local master browser. The preferred master causes nmbd -to force a browser election on startup and the os level -parameter sets Samba high enough so that it should win any browser elections. -

    -If you have an NT machine on the subnet that you wish to -be the local master browser then you can disable Samba from -becoming a local master browser by setting the following -options in the [global] section of the -smb.conf file : -

    -

    Example 10.3. smb.conf for not being a master browser

    [global]
    domain master = no
    local master = no
    preferred master = no
    os level = 0

    -

    Setting up DOMAIN Browsing

    -If you are adding Samba servers to a Windows NT Domain then -you must not set up a Samba server as a domain master browser. -By default, a Windows NT Primary Domain Controller for a domain -is also the Domain master browser for that domain, and many -things will break if a Samba server registers the Domain master -browser NetBIOS name (DOMAIN<1B>) +The Domain Master Browser should preferably be the local master +browser for its own subnet. In order to achieve this, set the following +options in the [global] section of the smb.conf +file as shown in . +

    +

    Example 10.1. Domain Master Browser smb.conf

    [global]
    domain master = yes
    local master = yes
    preferred master = yes
    os level = 65

    +

    +The Domain Master Browser may be the same machine as the WINS server, if necessary. +

    +Next, you should ensure that each of the subnets contains a machine that can act as +a Local Master Browser for the workgroup. Any MS Windows NT/200x/XP machine should +be able to do this, as will Windows 9x/Me machines (although these tend to get +rebooted more often, so it is not such a good idea to use these). To make a Samba +server a Local Master Browser set the following options in the +[global] section of the smb.conf file as +shown in : +

    +

    Example 10.2. Local master browser smb.conf

    [global]
    domain master = no
    local master = yes
    preferred master = yes
    os level = 65

    +

    +Do not do this for more than one Samba server on each subnet, or they will war with +each other over which is to be the Local Master Browser. +

    +The local master parameter allows Samba to act as a +Local Master Browser. The preferred master causes nmbd +to force a browser election on startup and the os level +parameter sets Samba high enough so it should win any browser elections. +

    +If you have an NT machine on the subnet that you wish to be the Local Master Browser, you can disable Samba from +becoming a Local Master Browser by setting the following options in the [global] section of the +smb.conf file as shown in : +

    +

    Example 10.3. smb.conf for not being a Master Browser

    [global]
    domain master = no
    local master = no
    preferred master = no
    os level = 0

    +

    DOMAIN Browsing Configuration

    +If you are adding Samba servers to a Windows NT Domain, then you must not set up a Samba server as a Domain Master Browser. +By default, a Windows NT Primary Domain Controller for a domain is also the Domain Master Browser for that domain. Network +browsing may break if a Samba server registers the domain master browser NetBIOS name (DOMAIN<1B>) with WINS instead of the PDC.

    -For subnets other than the one containing the Windows NT PDC -you may set up Samba servers as local master browsers as -described. To make a Samba server a local master browser set -the following options in the [global] section -of the smb.conf file : -

    -

    Example 10.4. Local master browser smb.conf

    [global]
    domain master = no
    local master = yes
    preferred master = yes
    os level = 65

    -

    -If you wish to have a Samba server fight the election with machines -on the same subnet you may set the os level parameter -to lower levels. By doing this you can tune the order of machines that -will become local master browsers if they are running. For -more details on this see the section -Forcing Samba to be the master browser -below. -

    -If you have Windows NT machines that are members of the domain -on all subnets, and you are sure they will always be running then -you can disable Samba from taking part in browser elections and -ever becoming a local master browser by setting following options -in the [global] section of the smb.conf -file : -

    -

    Example 10.5. smb.conf for not being a master browser

    [global]
    domain master = no
    local master = no
    preferred master = no
    os level = 0

    -

    Forcing Samba to be the master

    -Who becomes the master browser is determined by an election -process using broadcasts. Each election packet contains a number of parameters -which determine what precedence (bias) a host should have in the -election. By default Samba uses a very low precedence and thus loses -elections to just about anyone else. -

    -If you want Samba to win elections then just set the os level global -option in smb.conf to a higher number. It defaults to 0. Using 34 -would make it win all elections over every other system (except other -samba systems!) -

    -A os level of 2 would make it beat WfWg and Win95, but not MS Windows -NT/2K Server. A MS Windows NT/2K Server domain controller uses level 32. -

    The maximum os level is 255

    -If you want Samba to force an election on startup, then set the -preferred master global option in smb.conf to yes. Samba will -then have a slight advantage over other potential master browsers -that are not preferred master browsers. Use this parameter with -care, as if you have two hosts (whether they are Windows 95 or NT or -Samba) on the same local subnet both set with preferred master to -yes, then periodically and continually they will force an election -in order to become the local master browser. -

    - If you want Samba to be a domain master browser, then it is -recommended that you also set preferred master to yes, because -Samba will not become a domain master browser for the whole of your -LAN or WAN if it is not also a local master browser on its own -broadcast isolated subnet. -

    -It is possible to configure two Samba servers to attempt to become -the domain master browser for a domain. The first server that comes -up will be the domain master browser. All other Samba servers will -attempt to become the domain master browser every 5 minutes. They -will find that another Samba server is already the domain master -browser and will fail. This provides automatic redundancy, should -the current domain master browser fail. -

    Making Samba the domain master

    -The domain master is responsible for collating the browse lists of -multiple subnets so that browsing can occur between subnets. You can -make Samba act as the domain master by setting domain master = yes -in smb.conf. By default it will not be a domain master. -

    -Note that you should not set Samba to be the domain master for a -workgroup that has the same name as an NT Domain. -

    -When Samba is the domain master and the master browser, it will listen -for master announcements (made roughly every twelve minutes) from local -master browsers on other subnets and then contact them to synchronise -browse lists. -

    -If you want Samba to be the domain master then I suggest you also set -the os level high enough to make sure it wins elections, and set -preferred master to yes, to get Samba to force an election on -startup. -

    -Note that all your servers (including Samba) and clients should be -using a WINS server to resolve NetBIOS names. If your clients are only -using broadcasting to resolve NetBIOS names, then two things will occur: +For subnets other than the one containing the Windows NT PDC, you may set up Samba servers as Local Master Browsers as +described. To make a Samba server a Local Master Browser, set the following options in the [global] section +of the smb.conf file as shown in : +

    +

    Example 10.4. Local Master Browser smb.conf

    [global]
    domain master = no
    local master = yes
    preferred master = yes
    os level = 65

    +

    +If you wish to have a Samba server fight the election with machines on the same subnet you +may set the os level parameter to lower levels. +By doing this you can tune the order of machines that will become Local Master Browsers if +they are running. For more details on this refer to . +

    +If you have Windows NT machines that are members of the domain on all subnets and you are +sure they will always be running, you can disable Samba from taking part in browser elections +and ever becoming a Local Master Browser by setting the following options in the +[global] section of the smb.conf file as shown in : +

    +

    Example 10.5. smb.conf for not being a master browser

    [global]
    domain master = no
    local master = no
    preferred master = no
    os level = 0

    +

    Forcing Samba to Be the Master

    +Who becomes the master browser is determined by an election process using broadcasts. Each election packet contains a number of parameters +that determine what precedence (bias) a host should have in the election. By default Samba uses a low precedence and thus loses +elections to just about every Windows network server or client. +

    +If you want Samba to win elections, set the os level +global option in smb.conf to a higher number. It defaults to zero. Using 34 would make it win +all elections every other system (except other samba systems). +

    +An os level of two would make it beat Windows for Workgroups and Windows 9x/Me, but not MS Windows +NT/200x Server. An MS Windows NT/200x Server Domain Controller uses level 32. The maximum os level is 255. +

    +If you want Samba to force an election on startup, set the +preferred master global option in smb.conf to yes. +Samba will then have a slight advantage over other potential master browsers that are not Perferred Master Browsers. +Use this parameter with care, as if you have two hosts (whether they are Windows 9x/Me or +NT/200x/XP or Samba) on the same local subnet both set with preferred master +to yes, then periodically and continually they will force an election in order +to become the Local Master Browser. +

    +If you want Samba to be a Domain Master Browser, then it is recommended that +you also set preferred master to yes, because +Samba will not become a Domain Master Browser for the whole of your LAN or WAN if it is not also a +Local Master Browser on its own broadcast isolated subnet. +

    +It is possible to configure two Samba servers to attempt to become the Domain Master Browser for a domain. The first server that comes +up will be the Domain Master Browser. All other Samba servers will attempt to become the Domain Master Browser every five minutes. They +will find that another Samba server is already the domain master browser and will fail. This provides automatic redundancy, should +the current Domain Master Browser fail. +

    Making Samba the Domain Master

    +The domain master is responsible for collating the browse lists of multiple subnets so browsing can occur between subnets. You can +make Samba act as the Domain Master by setting domain master = yes +in smb.conf. By default it will not be a Domain Master. +

    +Do not set Samba to be the Domain Master for a workgroup that has the same name as an NT/200x Domain. +If Samba is configured to be the Domain Master for a workgroup that is present on the same +network as a Windows NT/200x domain that has the same name, network browsing problems will +certainly be experienced. +

    +When Samba is the Domain Master and the Master Browser, it will listen for master +announcements (made roughly every twelve minutes) from Local Master Browsers on +other subnets and then contact them to synchronize browse lists. +

    +If you want Samba to be the domain master, you should also set the +os level high enough to make sure it wins elections, and +set preferred master to yes, to +get Samba to force an election on startup. +

    +All servers (including Samba) and clients should be using a WINS server to resolve NetBIOS names. If your +clients are only using broadcasting to resolve NetBIOS names, then two things will occur:

    1. - your local master browsers will be unable to find a domain master - browser, as it will only be looking on the local subnet. + Local Master Browsers will be unable to find a Domain Master Browser, as they will be looking only on the local subnet.

    2. - if a client happens to get hold of a domain-wide browse list, and - a user attempts to access a host in that list, it will be unable to - resolve the NetBIOS name of that host. + If a client happens to get hold of a domain-wide browse list and a user attempts to access a + host in that list, it will be unable to resolve the NetBIOS name of that host.

    If, however, both Samba and your clients are using a WINS server, then:

    1. - your local master browsers will contact the WINS server and, as long as - Samba has registered that it is a domain master browser with the WINS - server, your local master browser will receive Samba's IP address - as its domain master browser. + Local master browsers will contact the WINS server and, as long as Samba has registered that it is a Domain Master Browser with the WINS + server, the Local Master Browser will receive Samba's IP address as its Domain Master Browser.

    2. - when a client receives a domain-wide browse list, and a user attempts - to access a host in that list, it will contact the WINS server to - resolve the NetBIOS name of that host. as long as that host has - registered its NetBIOS name with the same WINS server, the user will - be able to see that host. -

    Note about broadcast addresses

    -If your network uses a "0" based broadcast address (for example if it -ends in a 0) then you will strike problems. Windows for Workgroups -does not seem to support a 0's broadcast and you will probably find -that browsing and name lookups won't work. -

    Multiple interfaces

    -Samba now supports machines with multiple network interfaces. If you -have multiple interfaces then you will need to use the interfaces -option in smb.conf to configure them. -

    Use of the Remote Announce parameter

    -The remote announce parameter of + When a client receives a domain-wide browse list and a user attempts to access a host in that list, it will contact the WINS server to + resolve the NetBIOS name of that host. As long as that host has registered its NetBIOS name with the same WINS server, the user will + be able to see that host. +

    Note about Broadcast Addresses

    +If your network uses a 0 based broadcast address (for example, if it ends in a 0) then you will strike problems. Windows for Workgroups +does not seem to support a zeros broadcast and you will probably find that browsing and name lookups will not work. +

    Multiple Interfaces

    +Samba supports machines with multiple network interfaces. If you have multiple interfaces, you will +need to use the interfaces option in smb.conf to configure them. +

    Use of the Remote Announce Parameter

    +The remote announce parameter of smb.conf can be used to forcibly ensure that all the NetBIOS names on a network get announced to a remote network. -The syntax of the remote announce parameter is: +The syntax of the remote announce parameter is:

    remote announce = a.b.c.d [e.f.g.h] ...

    or

    remote announce = a.b.c.d/WORKGROUP [e.f.g.h/WORKGROUP] ...

    where: -

    a.b.c.d and -e.f.g.h

    - - - - is either the LMB (Local Master Browser) IP address -or the broadcast address of the remote network. -ie: the LMB is at 192.168.1.10, or the address -could be given as 192.168.1.255 where the netmask -is assumed to be 24 bits (255.255.255.0). -When the remote announcement is made to the broadcast -address of the remote network, every host will receive -our announcements. This is noisy and therefore -undesirable but may be necessary if we do NOT know -the IP address of the remote LMB.

    WORKGROUP

    is optional and can be either our own workgroup -or that of the remote network. If you use the -workgroup name of the remote network then our -NetBIOS machine names will end up looking like -they belong to that workgroup, this may cause -name resolution problems and should be avoided. -

    -

    Use of the Remote Browse Sync parameter

    -The remote browse sync parameter of -smb.conf is used to announce to -another LMB that it must synchronise its NetBIOS name list with our -Samba LMB. It works ONLY if the Samba server that has this option is +

    a.b.c.d and e.f.g.h

    + + + is either the LMB (Local Master Browser) IP address or the broadcast address of the remote network. + i.e., the LMB is at 192.168.1.10, or the address could be given as 192.168.1.255 where the netmask + is assumed to be 24 bits (255.255.255.0). When the remote announcement is made to the broadcast + address of the remote network, every host will receive our announcements. This is noisy and therefore + undesirable but may be necessary if we do not know the IP address of the remote LMB. +

    WORKGROUP

    is optional and can be either our own workgroup or that of the remote network. If you use the + workgroup name of the remote network, our NetBIOS machine names will end up looking like + they belong to that workgroup. This may cause name resolution problems and should be avoided. +

    +

    Use of the Remote Browse Sync Parameter

    +The remote browse sync parameter of +smb.conf is used to announce to another LMB that it must synchronize its NetBIOS name list with our +Samba LMB. This works only if the Samba server that has this option is simultaneously the LMB on its network segment.

    -The syntax of the remote browse sync parameter is: +The syntax of the remote browse sync parameter is:

    remote browse sync = a.b.c.d

    where a.b.c.d is either the IP address of the remote LMB or else is the network broadcast address of the remote segment. -

    WINS - The Windows Internetworking Name Server

    -Use of WINS (either Samba WINS or MS Windows NT Server WINS) is highly +

    WINS The Windows Internetworking Name Server

    +Use of WINS (either Samba WINS or MS Windows NT Server WINS) is highly recommended. Every NetBIOS machine registers its name together with a name_type value for each of several types of service it has available. -eg: It registers its name directly as a unique (the type 0x03) name. +It registers its name directly as a unique (the type 0x03) name. It also registers its name if it is running the LanManager compatible server service (used to make shares and printers available to other users) by registering the server (the type 0x20) name.

    All NetBIOS names are up to 15 characters in length. The name_type variable -is added to the end of the name - thus creating a 16 character name. Any +is added to the end of the name, thus creating a 16 character name. Any name that is shorter than 15 characters is padded with spaces to the 15th -character. ie: All NetBIOS names are 16 characters long (including the +character. Thus, all NetBIOS names are 16 characters long (including the name_type information).

    -WINS can store these 16 character names as they get registered. A client +WINS can store these 16-character names as they get registered. A client that wants to log onto the network can ask the WINS server for a list of all names that have registered the NetLogon service name_type. This saves broadcast traffic and greatly expedites logon processing. Since broadcast -name resolution can not be used across network segments this type of -information can only be provided via WINS or via statically configured -lmhosts files that must reside on all clients in the +name resolution cannot be used across network segments this type of +information can only be provided via WINS or via a statically configured +lmhosts file that must reside on all clients in the absence of WINS.

    -WINS also serves the purpose of forcing browse list synchronisation by all -LMB's. LMB's must synchronise their browse list with the DMB (domain master -browser) and WINS helps the LMB to identify it's DMB. By definition this -will work only within a single workgroup. Note that the domain master browser -has NOTHING to do with what is referred to as an MS Windows NT Domain. The +WINS also serves the purpose of forcing browse list synchronization by all +LMBs. LMBs must synchronize their browse list with the DMB (Domain Master +Browser) and WINS helps the LMB to identify its DMB. By definition this +will work only within a single workgroup. Note that the Domain Master Browser +has nothing to do with what is referred to as an MS Windows NT Domain. The later is a reference to a security environment while the DMB refers to the master controller for browse list information only.

    -Use of WINS will work correctly only if EVERY client TCP/IP protocol stack -has been configured to use the WINS server/s. Any client that has not been -configured to use the WINS server will continue to use only broadcast based -name registration so that WINS may NEVER get to know about it. In any case, +WINS will work correctly only if every client TCP/IP protocol stack +has been configured to use the WINS servers. Any client that has not been +configured to use the WINS server will continue to use only broadcast-based +name registration so WINS may never get to know about it. In any case, machines that have not registered with a WINS server will fail name to address lookup attempts by other clients and will therefore cause workstation access errors.

    To configure Samba as a WINS server just add -wins support = yes to the smb.conf +wins support = yes to the smb.conf file [global] section.

    To configure Samba to register with a WINS server just add -wins server = a.b.c.d to your smb.conf file [global] section. +wins server = a.b.c.d +to your smb.conf file [global] section.

    Important

    -Never use both wins support = yes together -with wins server = a.b.c.d -particularly not using it's own IP address. -Specifying both will cause nmbd to refuse to start! -

    Setting up a WINS server

    -Either a Samba machine or a Windows NT Server machine may be set up -as a WINS server. To set a Samba machine to be a WINS server you must -add the following option to the smb.conf file on the selected machine : -in the [global] section add the line -

    -

    wins support = yes

    +Never use both wins support = yes together +with wins server = a.b.c.d +particularly not using its own IP address. Specifying both will cause nmbd to refuse to start! +

    WINS Server Configuration

    +Either a Samba Server or a Windows NT Server machine may be set up +as a WINS server. To configure a Samba Server to be a WINS server you must +add to the smb.conf file on the selected Server the following line to +the [global] section: +

    +

    wins support = yes

    Versions of Samba prior to 1.9.17 had this parameter default to -yes. If you have any older versions of Samba on your network it is +yes. If you have any older versions of Samba on your network it is strongly suggested you upgrade to a recent version, or at the very -least set the parameter to 'no' on all these machines. +least set the parameter to “no” on all these machines.

    -Machines with wins support = yes will keep a list of +Machines configured with wins support = yes will keep a list of all NetBIOS names registered with them, acting as a DNS for NetBIOS names.

    -You should set up only ONE WINS server. Do NOT set the -wins support = yes option on more than one Samba +It is strongly recommended to set up only one WINS server. Do not set the +wins support = yes option on more than one Samba server.

    -To set up a Windows NT Server as a WINS server you need to set up -the WINS service - see your NT documentation for details. Note that -Windows NT WINS Servers can replicate to each other, allowing more -than one to be set up in a complex subnet environment. As Microsoft -refuses to document these replication protocols, Samba cannot currently -participate in these replications. It is possible in the future that -a Samba->Samba WINS replication protocol may be defined, in which -case more than one Samba machine could be set up as a WINS server -but currently only one Samba server should have the -wins support = yes parameter set. -

    -After the WINS server has been configured you must ensure that all + +To configure Windows NT/200x Server as a WINS server, install and configure +the WINS service. See the Windows NT/200x documentation for details. +Windows NT/200x WINS servers can replicate to each other, allowing more +than one to be set up in a complex subnet environment. As Microsoft +refuses to document the replication protocols, Samba cannot currently +participate in these replications. It is possible in the future that +a Samba-to-Samba WINS replication protocol may be defined, in which +case more than one Samba machine could be set up as a WINS server. +Currently only one Samba server should have the +wins support = yes parameter set. +

    +After the WINS server has been configured, you must ensure that all machines participating on the network are configured with the address -of this WINS server. If your WINS server is a Samba machine, fill in +of this WINS server. If your WINS server is a Samba machine, fill in the Samba machine IP address in the Primary WINS Server field of the Control Panel->Network->Protocols->TCP->WINS Server dialogs -in Windows 95 or Windows NT. To tell a Samba server the IP address -of the WINS server add the following line to the [global] section of -all smb.conf files : +in Windows 9x/Me or Windows NT/200x. To tell a Samba server the IP address +of the WINS server, add the following line to the [global] section of +all smb.conf files:

    -

    wins server = <name or IP address>

    +

    wins server = <name or IP address>

    where <name or IP address> is either the DNS name of the WINS server machine or its IP address.

    -Note that this line MUST NOT BE SET in the smb.conf file of the Samba -server acting as the WINS server itself. If you set both the -wins support = yes option and the -wins server = <name> option then -nmbd will fail to start. +This line must not be set in the smb.conf file of the Samba +server acting as the WINS server itself. If you set both the +wins support = yes option and the +wins server = <name> option then +nmbd will fail to start.

    -There are two possible scenarios for setting up cross subnet browsing. -The first details setting up cross subnet browsing on a network containing -Windows 95, Samba and Windows NT machines that are not configured as -part of a Windows NT Domain. The second details setting up cross subnet +There are two possible scenarios for setting up cross-subnet browsing. +The first details setting up cross-subnet browsing on a network containing +Windows 9x/Me, Samba and Windows NT/200x machines that are not configured as +part of a Windows NT Domain. The second details setting up cross-subnet browsing on networks that contain NT Domains. -

    WINS Replication

    +

    WINS Replication

    + Samba-3 permits WINS replication through the use of the wrepld utility. This tool is not currently capable of being used as it is still in active development. -As soon as this tool becomes moderately functional we will prepare man pages and enhance this +As soon as this tool becomes moderately functional, we will prepare man pages and enhance this section of the documentation to provide usage and technical details. -

    Static WINS Entries

    +

    Static WINS Entries

    Adding static entries to your Samba WINS server is actually fairly easy. All you have to do is add a line to wins.dat, typically located in /usr/local/samba/var/locks.

    -Entries in wins.dat take the form of +Entries in wins.dat take the form of:

    -"NAME#TYPE" TTL ADDRESS+ FLAGS
    +"NAME#TYPE" TTL ADDRESS+ FLAGS
     

    where NAME is the NetBIOS name, TYPE is the NetBIOS type, TTL is the @@ -586,61 +550,61 @@ time-to-live as an absolute time in seconds, ADDRESS+ is one or more addresses corresponding to the registration and FLAGS are the NetBIOS flags for the registration.

    -A typical dynamic entry looks like: +A typical dynamic entry looks like this:

    -"MADMAN#03" 1055298378 192.168.1.2 66R
    +"MADMAN#03" 1055298378 192.168.1.2 66R
     

    -To make it static, all that has to be done is set the TTL to 0: +To make it static, all that has to be done is set the TTL to 0, like this:

    -"MADMAN#03" 0 192.168.1.2 66R
    +"MADMAN#03" 0 192.168.1.2 66R
     

    -Though this method works with early Samba-3 versions, there's a +Though this method works with early Samba-3 versions, there is a possibility that it may change in future versions if WINS replication is added. -

    Helpful Hints

    +

    Helpful Hints

    The following hints should be carefully considered as they are stumbling points for many new network administrators. -

    Windows Networking Protocols

    Warning

    -Do NOT use more than one (1) protocol on MS Windows machines +

    Windows Networking Protocols

    Warning

    +Do not use more than one protocol on MS Windows machines.

    -A very common cause of browsing problems results from installing more than +A common cause of browsing problems results from installing more than one protocol on an MS Windows machine.

    Every NetBIOS machine takes part in a process of electing the LMB (and DMB) every 15 minutes. A set of election criteria is used to determine the order of precedence for winning this election process. A machine running Samba or -Windows NT will be biased so that the most suitable machine will predictably -win and thus retain it's role. +Windows NT will be biased so the most suitable machine will predictably +win and thus retain its role.

    -The election process is "fought out" so to speak over every NetBIOS network -interface. In the case of a Windows 9x machine that has both TCP/IP and IPX -installed and has NetBIOS enabled over both protocols the election will be -decided over both protocols. As often happens, if the Windows 9x machine is +The election process is “fought out” so to speak over every NetBIOS network +interface. In the case of a Windows 9x/Me machine that has both TCP/IP and IPX +installed and has NetBIOS enabled over both protocols, the election will be +decided over both protocols. As often happens, if the Windows 9x/Me machine is the only one with both protocols then the LMB may be won on the NetBIOS interface over the IPX protocol. Samba will then lose the LMB role as Windows -9x will insist it knows who the LMB is. Samba will then cease to function -as an LMB and thus browse list operation on all TCP/IP only machines will +9x/Me will insist it knows who the LMB is. Samba will then cease to function +as an LMB and thus browse list operation on all TCP/IP-only machines will fail. -

    -Windows 95, 98, 98se, Me are referred to generically as Windows 9x. -The Windows NT4, 2000, XP and 2003 use common protocols. These are roughly -referred to as the WinNT family, but it should be recognised that 2000 and +

    +Windows 95, 98, 98se, and Me are referred to generically as Windows 9x/Me. +The Windows NT4, 200x, and XP use common protocols. These are roughly +referred to as the Windows NT family, but it should be recognized that 2000 and XP/2003 introduce new protocol extensions that cause them to behave -differently from MS Windows NT4. Generally, where a server does NOT support +differently from MS Windows NT4. Generally, where a server does not support the newer or extended protocol, these will fall back to the NT4 protocols. -

    -The safest rule of all to follow it this - USE ONLY ONE PROTOCOL! -

    Name Resolution Order

    +

    +The safest rule of all to follow is: use only one protocol! +

    Name Resolution Order

    Resolution of NetBIOS names to IP addresses can take place using a number of methods. The only ones that can provide NetBIOS name_type information are: -

    • WINS: the best tool!

    • LMHOSTS: is static and hard to maintain.

    • Broadcast: uses UDP and can not resolve names across remote segments.

    -Alternative means of name resolution includes: -

    • /etc/hosts: is static, hard to maintain, and lacks name_type info

    • DNS: is a good choice but lacks essential name_type info.

    -Many sites want to restrict DNS lookups and want to avoid broadcast name +

    • WINS the best tool.
    • LMHOSTS static and hard to maintain.
    • Broadcast uses UDP and cannot resolve names across remote segments.

    +Alternative means of name resolution include: +

    • Static /etc/hosts hard to maintain, and lacks name_type info.
    • DNS is a good choice but lacks essential name_type info.

    +Many sites want to restrict DNS lookups and avoid broadcast name resolution traffic. The name resolve order parameter is of great help here. The syntax of the name resolve order parameter is:

    name resolve order = wins lmhosts bcast host

    @@ -648,260 +612,289 @@ The syntax of the name resolve order parameter

    name resolve order = wins lmhosts (eliminates bcast and host)

    The default is:

    name resolve order = host lmhost wins bcast

    -where "host" refers to the native methods used by the UNIX system +where “host” refers to the native methods used by the UNIX system to implement the gethostbyname() function call. This is normally controlled by /etc/host.conf, /etc/nsswitch.conf and /etc/resolv.conf. -

    Technical Overview of browsing

    +

    Technical Overview of Browsing

    SMB networking provides a mechanism by which clients can access a list -of machines in a network, a so-called browse list. This list +of machines in a network, a so-called browse list. This list contains machines that are ready to offer file and/or print services to other machines within the network. Thus it does not include -machines which aren't currently able to do server tasks. The browse -list is heavily used by all SMB clients. Configuration of SMB +machines that aren't currently able to do server tasks. The browse +list is heavily used by all SMB clients. Configuration of SMB browsing has been problematic for some Samba users, hence this document.

    -MS Windows 2000 and later, as with Samba 3 and later, can be +MS Windows 2000 and later versions, as with Samba-3 and later versions, can be configured to not use NetBIOS over TCP/IP. When configured this way, it is imperative that name resolution (using DNS/LDAP/ADS) be correctly -configured and operative. Browsing will NOT work if name resolution +configured and operative. Browsing will not work if name resolution from SMB machine names to IP addresses does not function correctly.

    -Where NetBIOS over TCP/IP is enabled use of a WINS server is highly +Where NetBIOS over TCP/IP is enabled, use of a WINS server is highly recommended to aid the resolution of NetBIOS (SMB) names to IP addresses. WINS allows remote segment clients to obtain NetBIOS name_type information -that can NOT be provided by any other means of name resolution. -

    Browsing support in Samba

    -Samba facilitates browsing. The browsing is supported by nmbd +that cannot be provided by any other means of name resolution. +

    Browsing Support in Samba

    +Samba facilitates browsing. The browsing is supported by nmbd and is also controlled by options in the smb.conf file. Samba can act as a local browse master for a workgroup and the ability to support domain logons and scripts is now available.

    -Samba can also act as a domain master browser for a workgroup. This -means that it will collate lists from local browse masters into a -wide area network server list. In order for browse clients to +Samba can also act as a Domain Master Browser for a workgroup. This +means that it will collate lists from Local Master Browsers into a +wide area network server list. In order for browse clients to resolve the names they may find in this list, it is recommended that both Samba and your clients use a WINS server.

    -Note that you should NOT set Samba to be the domain master for a -workgroup that has the same name as an NT Domain: on each wide area -network, you must only ever have one domain master browser per workgroup, -regardless of whether it is NT, Samba or any other type of domain master -that is providing this service. +Do not set Samba to be the Domain Master for a workgroup that has the same +name as an NT Domain. On each wide area network, you must only ever have one +Domain Master Browser per workgroup, regardless of whether it is NT, Samba +or any other type of domain master that is providing this service.

    Note

    -Nmbd can be configured as a WINS server, but it is not -necessary to specifically use Samba as your WINS server. MS Windows -NT4, Server or Advanced Server 2000 or 2003 can be configured as -your WINS server. In a mixed NT/2000/2003 server and Samba environment on +nmbd can be configured as a WINS server, but it is not +necessary to specifically use Samba as your WINS server. MS Windows +NT4, Server or Advanced Server 200x can be configured as +your WINS server. In a mixed NT/200x server and Samba environment on a Wide Area Network, it is recommended that you use the Microsoft -WINS server capabilities. In a Samba-only environment, it is -recommended that you use one and only one Samba server as your WINS server. +WINS server capabilities. In a Samba-only environment, it is +recommended that you use one and only one Samba server as the WINS server.

    To get browsing to work you need to run nmbd as usual, but will need -to use the workgroup option in smb.conf +to use the workgroup option in smb.conf to control what workgroup Samba becomes a part of.

    Samba also has a useful option for a Samba server to offer itself for -browsing on another subnet. It is recommended that this option is only -used for 'unusual' purposes: announcements over the internet, for -example. See remote announce in the -smb.conf man page. -

    Problem resolution

    -If something doesn't work then hopefully the log.nmbd file will help -you track down the problem. Try a debug level of 2 or 3 for finding +browsing on another subnet. It is recommended that this option is only +used for “unusual” purposes: announcements over the Internet, for +example. See remote announce in the +smb.conf man page. +

    Problem Resolution

    +If something does not work, the log.nmbd file will help +to track down the problem. Try a log level of 2 or 3 for finding problems. Also note that the current browse list usually gets stored in text form in a file called browse.dat.

    -Note that if it doesn't work for you, then you should still be able to -type the server name as \\SERVER in filemanager then -hit enter and filemanager should display the list of available shares. -

    -Some people find browsing fails because they don't have the global -guest account set to a valid account. Remember that the -IPC$ connection that lists the shares is done as guest, and thus you must -have a valid guest account. -

    -MS Windows 2000 and upwards (as with Samba) can be configured to disallow -anonymous (ie: Guest account) access to the IPC$ share. In that case, the +If it does not work, you should still be able to +type the server name as \\SERVER in filemanager, then +press enter and filemanager should display the list of available shares. +

    +Some people find browsing fails because they do not have the global +guest account set to a valid account. Remember that the +IPC$ connection that lists the shares is done as guest and, thus, you must have a valid guest account. +

    +MS Windows 2000 and later (as with Samba) can be configured to disallow +anonymous (i.e., guest account) access to the IPC$ share. In that case, the MS Windows 2000/XP/2003 machine acting as an SMB/CIFS client will use the -name of the currently logged in user to query the IPC$ share. MS Windows -9X clients are not able to do this and thus will NOT be able to browse +name of the currently logged-in user to query the IPC$ share. MS Windows +9x/Me clients are not able to do this and thus will not be able to browse server resources. -

    +

    The other big problem people have is that their broadcast address, -netmask or IP address is wrong (specified with the "interfaces" option +netmask or IP address is wrong (specified with the interfaces option in smb.conf) -

    Browsing across subnets

    -Since the release of Samba 1.9.17(alpha1), Samba has supported the +

    Cross-Subnet Browsing

    + +Since the release of Samba 1.9.17 (alpha1), Samba has supported the replication of browse lists across subnet boundaries. This section describes how to set this feature up in different settings.

    -To see browse lists that span TCP/IP subnets (ie. networks separated -by routers that don't pass broadcast traffic), you must set up at least -one WINS server. The WINS server acts as a DNS for NetBIOS names, allowing -NetBIOS name to IP address translation to be done by doing a direct -query of the WINS server. This is done via a directed UDP packet on -port 137 to the WINS server machine. The reason for a WINS server is -that by default, all NetBIOS name to IP address translation is done -by broadcasts from the querying machine. This means that machines +To see browse lists that span TCP/IP subnets (i.e., networks separated +by routers that do not pass broadcast traffic), you must set up at least +one WINS server. The WINS server acts as a DNS for NetBIOS names. This will +allow NetBIOS name-to-IP address translation to be completed by a direct +query of the WINS server. This is done via a directed UDP packet on +port 137 to the WINS server machine. The WINS server avoids the necessity +of default NetBIOS name-to-IP address translation, which is done +using UDP broadcasts from the querying machine. This means that machines on one subnet will not be able to resolve the names of machines on another subnet without using a WINS server.

    Remember, for browsing across subnets to work correctly, all machines, -be they Windows 95, Windows NT, or Samba servers must have the IP address +be they Windows 95, Windows NT or Samba servers, must have the IP address of a WINS server given to them by a DHCP server, or by manual configuration -(for Win95 and WinNT, this is in the TCP/IP Properties, under Network -settings) for Samba this is in the smb.conf file. -

    How does cross subnet browsing work ?

    -Cross subnet browsing is a complicated dance, containing multiple -moving parts. It has taken Microsoft several years to get the code +(for Windows 9x/Me and Windows NT/200x/XP, this is in the TCP/IP Properties, under Network +settings); for Samba, this is in the smb.conf file. +

    Behavior of Cross-Subnet Browsing

    +Cross-subnet Browsing is a complicated dance, containing multiple +moving parts. It has taken Microsoft several years to get the code that achieves this correct, and Samba lags behind in some areas. -Samba is capable of cross subnet browsing when configured correctly. -

    - Consider a network set up as in the diagram below. -

    Figure 10.1. Cross subnet browsing example

    Cross subnet browsing example

    -Consisting of 3 subnets (1, 2, 3) connected by two routers -(R1, R2) - these do not pass broadcasts. Subnet 1 has 5 machines -on it, subnet 2 has 4 machines, subnet 3 has 4 machines. Assume -for the moment that all these machines are configured to be in the -same workgroup (for simplicity's sake). Machine N1_C on subnet 1 -is configured as Domain Master Browser (ie. it will collate the -browse lists for the workgroup). Machine N2_D is configured as +Samba is capable of cross-subnet browsing when configured correctly. +

    +Consider a network set up as . +

    Figure 10.1. Cross-Subnet Browsing Example.

    Cross-Subnet Browsing Example.

    +This consists of 3 subnets (1, 2, 3) connected by two routers +(R1, R2) which do not pass broadcasts. Subnet 1 has five machines +on it, subnet 2 has four machines, subnet 3 has four machines. Assume +for the moment that all machines are configured to be in the +same workgroup (for simplicity's sake). Machine N1_C on subnet 1 +is configured as Domain Master Browser (i.e., it will collate the +browse lists for the workgroup). Machine N2_D is configured as WINS server and all the other machines are configured to register their NetBIOS names with it.

    -As all these machines are booted up, elections for master browsers -will take place on each of the three subnets. Assume that machine +As these machines are booted up, elections for master browsers +will take place on each of the three subnets. Assume that machine N1_C wins on subnet 1, N2_B wins on subnet 2, and N3_D wins on -subnet 3 - these machines are known as local master browsers for -their particular subnet. N1_C has an advantage in winning as the -local master browser on subnet 1 as it is set up as Domain Master +subnet 3. These machines are known as Local Master Browsers for +their particular subnet. N1_C has an advantage in winning as the +Local Master Browser on subnet 1 as it is set up as Domain Master Browser.

    On each of the three networks, machines that are configured to offer sharing services will broadcast that they are offering -these services. The local master browser on each subnet will +these services. The Local Master Browser on each subnet will receive these broadcasts and keep a record of the fact that -the machine is offering a service. This list of records is -the basis of the browse list. For this case, assume that -all the machines are configured to offer services so all machines +the machine is offering a service. This list of records is +the basis of the browse list. For this case, assume that +all the machines are configured to offer services, so all machines will be on the browse list.

    -For each network, the local master browser on that network is -considered 'authoritative' for all the names it receives via -local broadcast. This is because a machine seen by the local -master browser via a local broadcast must be on the same -network as the local master browser and thus is a 'trusted' -and 'verifiable' resource. Machines on other networks that -the local master browsers learn about when collating their -browse lists have not been directly seen - these records are -called 'non-authoritative'. +For each network, the Local Master Browser on that network is +considered “authoritative” for all the names it receives via +local broadcast. This is because a machine seen by the Local Master +Browser via a local broadcast must be on the same network as the +Local Master Browser and thus is a “trusted” +and “verifiable” resource. Machines on other networks that +the Local Master Browsers learn about when collating their +browse lists have not been directly seen. These records are +called “non-authoritative.

    -At this point the browse lists look as follows (these are -the machines you would see in your network neighborhood if -you looked in it on a particular network right now). +At this point the browse lists appear as shown in (these are +the machines you would see in your network neighborhood if you looked in it on a particular network right now).

    -

    Table 10.1. Browse subnet example 1

    SubnetBrowse MasterList
    Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E
    Subnet2N2_BN2_A, N2_B, N2_C, N2_D
    Subnet3N3_DN3_A, N3_B, N3_C, N3_D

    +

    Table 10.1. Browse Subnet Example 1

    SubnetBrowse MasterList
    Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E
    Subnet2N2_BN2_A, N2_B, N2_C, N2_D
    Subnet3N3_DN3_A, N3_B, N3_C, N3_D

    -Note that at this point all the subnets are separate, no -machine is seen across any of the subnets. +At this point all the subnets are separate, and no machine is seen across any of the subnets.

    -Now examine subnet 2. As soon as N2_B has become the local -master browser it looks for a Domain master browser to synchronize -its browse list with. It does this by querying the WINS server +Now examine subnet 2. As soon as N2_B has become the Local +Master Browser it looks for a Domain Master Browser with which to synchronize +its browse list. It does this by querying the WINS server (N2_D) for the IP address associated with the NetBIOS name -WORKGROUP<1B>. This name was registered by the Domain master -browser (N1_C) with the WINS server as soon as it was booted. +WORKGROUP<1B>. This name was registered by the Domain Master +Browser (N1_C) with the WINS server as soon as it was started.

    -Once N2_B knows the address of the Domain master browser it -tells it that is the local master browser for subnet 2 by -sending a MasterAnnouncement packet as a UDP port 138 packet. -It then synchronizes with it by doing a NetServerEnum2 call. This +Once N2_B knows the address of the Domain Master Browser, it +tells it that is the Local Master Browser for subnet 2 by +sending a MasterAnnouncement packet as a UDP port 138 packet. +It then synchronizes with it by doing a NetServerEnum2 call. This tells the Domain Master Browser to send it all the server -names it knows about. Once the domain master browser receives -the MasterAnnouncement packet it schedules a synchronization -request to the sender of that packet. After both synchronizations -are done the browse lists look like : -

    -

    Table 10.2. Browse subnet example 2

    SubnetBrowse MasterList
    Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E, +names it knows about. Once the Domain Master Browser receives +the MasterAnnouncement packet, it schedules a synchronization +request to the sender of that packet. After both synchronizations +are complete the browse lists look as shown in : +

    Table 10.2. Browse Subnet Example 2

    SubnetBrowse MasterList
    Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E, N2_A(*), N2_B(*), N2_C(*), N2_D(*)
    Subnet2N2_BN2_A, N2_B, N2_C, N2_D, N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*)
    Subnet3N3_DN3_A, N3_B, N3_C, N3_D

    - -Servers with a (*) after them are non-authoritative names. +Servers with an (*) after them are non-authoritative names.

    At this point users looking in their network neighborhood on subnets 1 or 2 will see all the servers on both, users on subnet 3 will still only see the servers on their own subnet.

    The same sequence of events that occurred for N2_B now occurs -for the local master browser on subnet 3 (N3_D). When it -synchronizes browse lists with the domain master browser (N1_A) +for the Local Master Browser on subnet 3 (N3_D). When it +synchronizes browse lists with the Domain Master Browser (N1_A) it gets both the server entries on subnet 1, and those on -subnet 2. After N3_D has synchronized with N1_C and vica-versa -the browse lists look like. -

    -

    Table 10.3. Browse subnet example 3

    SubnetBrowse MasterList
    Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E, +subnet 2. After N3_D has synchronized with N1_C and vica versa, +the browse lists will appear as shown in . +

    Table 10.3. Browse Subnet Example 3

    SubnetBrowse MasterList
    Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E, N2_A(*), N2_B(*), N2_C(*), N2_D(*), N3_A(*), N3_B(*), N3_C(*), N3_D(*)
    Subnet2N2_BN2_A, N2_B, N2_C, N2_D, N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*)
    Subnet3N3_DN3_A, N3_B, N3_C, N3_D, N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*), N2_A(*), N2_B(*), N2_C(*), N2_D(*)

    - -Servers with a (*) after them are non-authoritative names. +Servers with an (*) after them are non-authoritative names.

    -At this point users looking in their network neighborhood on -subnets 1 or 3 will see all the servers on all subnets, users on +At this point, users looking in their network neighborhood on +subnets 1 or 3 will see all the servers on all subnets, while users on subnet 2 will still only see the servers on subnets 1 and 2, but not 3.

    -Finally, the local master browser for subnet 2 (N2_B) will sync again -with the domain master browser (N1_C) and will receive the missing -server entries. Finally - and as a steady state (if no machines -are removed or shut off) the browse lists will look like : -

    -

    Table 10.4. Browse subnet example 4

    SubnetBrowse MasterList
    Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E, +Finally, the Local Master Browser for subnet 2 (N2_B) will sync again +with the Domain Master Browser (N1_C) and will receive the missing +server entries. Finally, as when a steady state (if no machines +are removed or shut off) has been achieved, the browse lists will appear +as shown in . +

    Table 10.4. Browse Subnet Example 4

    SubnetBrowse MasterList
    Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E, N2_A(*), N2_B(*), N2_C(*), N2_D(*), N3_A(*), N3_B(*), N3_C(*), N3_D(*)
    Subnet2N2_BN2_A, N2_B, N2_C, N2_D, N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*), N3_A(*), N3_B(*), N3_C(*), N3_D(*)
    Subnet3N3_DN3_A, N3_B, N3_C, N3_D, N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*), N2_A(*), N2_B(*), N2_C(*), N2_D(*)

    - -Servers with a (*) after them are non-authoritative names. +Servers with an (*) after them are non-authoritative names.

    -Synchronizations between the domain master browser and local -master browsers will continue to occur, but this should be a -steady state situation. +Synchronizations between the Domain Master Browser and Local +Master Browsers will continue to occur, but this should remain a +steady state operation.

    -If either router R1 or R2 fails the following will occur: +If either router R1 or R2 fails, the following will occur:

    1. Names of computers on each side of the inaccessible network fragments - will be maintained for as long as 36 minutes, in the network neighbourhood + will be maintained for as long as 36 minutes in the network neighborhood lists.

    2. Attempts to connect to these inaccessible computers will fail, but the - names will not be removed from the network neighbourhood lists. + names will not be removed from the network neighborhood lists.

    3. If one of the fragments is cut off from the WINS server, it will only - be able to access servers on its local subnet, by using subnet-isolated - broadcast NetBIOS name resolution. The effects are similar to that of + be able to access servers on its local subnet using subnet-isolated + broadcast NetBIOS name resolution. The effects are similar to that of losing access to a DNS server. -

    Common Errors

    +

    Common Errors

    Many questions are asked on the mailing lists regarding browsing. The majority of browsing -problems originate out of incorrect configuration of NetBIOS name resolution. Some are of +problems originate from incorrect configuration of NetBIOS name resolution. Some are of particular note. -

    How can one flush the Samba NetBIOS name cache without restarting Samba?

    -Samba's nmbd process controls all browse list handling. Under normal circumstances it is -safe to restart nmbd. This will effectively flush the Samba NetBIOS name cache and cause it -to be rebuilt. Note that this does NOT make certain that a rogue machine name will not re-appear -in the browse list. When nmbd is taken out of service another machine on the network will -become the browse master. This new list may still have the rogue entry in it. If you really -want to clear a rogue machine from the list then every machine on the network will need to be -shut down and restarted at after all machines are down. Failing a complete restart, the only +

    How Can One Flush the Samba NetBIOS Name Cache without Restarting Samba?

    + +Samba's nmbd process controls all browse list handling. Under normal circumstances it is +safe to restart nmbd. This will effectively flush the Samba NetBIOS name cache and cause it +to be rebuilt. This does not make certain that a rogue machine name will not re-appear +in the browse list. When nmbd is taken out of service, another machine on the network will +become the Browse Master. This new list may still have the rogue entry in it. If you really +want to clear a rogue machine from the list, every machine on the network will need to be +shut down and restarted after all machines are down. Failing a complete restart, the only other thing you can do is wait until the entry times out and is then flushed from the list. -This may take a long time on some networks (months). -

    My client reports "This server is not configured to list shared resources"

    +This may take a long time on some networks (perhaps months). +

    Server Resources Can Not Be Listed

    My Client Reports ‘This server is not configured to list shared resources

    Your guest account is probably invalid for some reason. Samba uses the -guest account for browsing in smbd. Check that your guest account is +guest account for browsing in smbd. Check that your guest account is valid. -

    See also guest account in the smb.conf man page.

    I get an Unable to browse the network error

    This error can have multiple causes:

    • There is no local master browser. Configure nmbd - or any other machine to serve as local master browser.

    • You can not log onto the machine that is the local master - browser. Can you logon to it as guest user?

    • There is no IP connectivity to the local master browser. - Can you reach it by broadcast?

    +

    Also see guest account in the smb.conf man page.

    I get an `Unable to browse the network' error

    This error can have multiple causes: + +

    • There is no Local Master Browser. Configure nmbd + or any other machine to serve as Local Master Browser.

    • You cannot log onto the machine that is the local master + browser. Can you logon to it as a guest user?

    • There is no IP connectivity to the Local Master Browser. + Can you reach it by broadcast?

    Browsing of Shares and Directories is Very Slow

    + +There are only two machines on a test network. One a Samba server, the other a Windows XP machine. +Authentication and logons work perfectly, but when I try to explore shares on the Samba server, the +Windows XP client becomes unrespsonsive. Sometimes it does not respond for some minutes. Eventually, +Windows Explorer will respond and displays files and directories without problem. +display file and directory.” +

    +But, the share is immediately available from a command shell (cmd, followed by +exploration with dos command. Is this a Samba problem or is it a Windows problem? How can I solve this? +

    +Here are a few possibilities: +

    Bad Networking Hardware

    + + + Most common defective hardware problems center around low cost or defective HUBs, routers, + Network Interface Controllers (NICs) and bad wiring. If one piece of hardware is defective + the whole network may suffer. Bad networking hardware can cause data corruption. Most bad + networking hardware problems are accompanied by an increase in apparent network traffic, + but not all. +

    The Windows XP WebClient

    + A number of sites have reported similar slow network browsing problems and found that when + the WebClient service is turned off, the problem dissapears. This is certainly something + that should be explored as it is a simple solution if it works. +

    Inconsistent WINS Configuration

    + This type of problem is common when one client is configured to use a WINS server (that is + a TCP/IP configuration setting) and there is no WINS server on the network. Alternately, + this will happen is there is a WINS server and Samba is not configured to use it. The use of + WINS is highly recommended if the network is using NetBIOS over TCP/IP protocols. If use + of NetBIOS over TCP/IP is disabled on all clients, Samba should not be configured as a WINS + server neither should it be configured to use one. +

    Incorrect DNS Configuration

    + If use of NetBIOS over TCP/IP is disabled, Active Directory is in use and the DNS server + has been incorrectly configured. Refer for more information. +

    diff --git a/docs/htmldocs/Other-Clients.html b/docs/htmldocs/Other-Clients.html index dffa1122ac..9e3c643103 100644 --- a/docs/htmldocs/Other-Clients.html +++ b/docs/htmldocs/Other-Clients.html @@ -1,80 +1,66 @@ -Chapter 38. Samba and other CIFS clients

    Chapter 38. Samba and other CIFS clients

    Jelmer R. Vernooij

    The Samba Team

    Jim McDonough

    OS/2

    5 Mar 2001

    This chapter contains client-specific information.

    Macintosh clients?

    - Yes. Thursby now has a CIFS Client / Server called DAVE -

    -They test it against Windows 95, Windows NT and samba for -compatibility issues. At the time of writing, DAVE was at version -1.0.1. The 1.0.0 to 1.0.1 update is available as a free download from -the Thursby web site (the speed of finder copies has been greatly -enhanced, and there are bug-fixes included). +Chapter 38. Samba and Other CIFS Clients

    Chapter 38. Samba and Other CIFS Clients

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Dan Shearer

    Samba Team

    Jim McDonough

    OS/2

    5 Mar 2001

    This chapter contains client-specific information.

    Macintosh Clients

    +Yes. Thursby has a CIFS Client/Server called DAVE. +They test it against Windows 95, Windows NT /200x/XP and Samba for +compatibility issues. At the time of this writing, DAVE was at version +4.1. Please refer to Thursby's Web site for more information regarding this +product.

    -Alternatives - There are two free implementations of AppleTalk for -several kinds of UNIX machines, and several more commercial ones. +Alternatives There are two free implementations of AppleTalk for +several kinds of UNIX machines and several more commercial ones. These products allow you to run file services and print services natively to Macintosh users, with no additional support required on -the Macintosh. The two free implementations are -Netatalk, and -CAP. -What Samba offers MS -Windows users, these packages offer to Macs. For more info on these -packages, Samba, and Linux (and other UNIX-based systems) see -http://www.eats.com/linux_mac_win.html -

    Newer versions of the Macintosh (Mac OS X) include Samba.

    OS2 Client

    Configuring OS/2 Warp Connect or - OS/2 Warp 4 as a client for Samba

    Basically, you need three components:

    • The File and Print Client ('IBM Peer')

    • TCP/IP ('Internet support')

    • The "NetBIOS over TCP/IP" driver ('TCPBEUI')

    Installing the first two together with the base operating +the Macintosh. The two free implementations are +Netatalk, and +CAP. +What Samba offers MS Windows users, these packages offer to Macs. +For more info on these packages, Samba, and Linux (and other UNIX-based systems), see +http://www.eats.com/linux_mac_win.html. +

    Newer versions of the Macintosh (Mac OS X) include Samba.

    OS2 Client

    Configuring OS/2 Warp Connect or OS/2 Warp 4

    Basically, you need three components:

    • The File and Print Client (IBM Peer)
    • TCP/IP (Internet support)
    • The “NetBIOS over TCP/IP” driver (TCPBEUI)

    Installing the first two together with the base operating system on a blank system is explained in the Warp manual. If Warp has already been installed, but you now want to install the - networking support, use the "Selective Install for Networking" - object in the "System Setup" folder.

    Adding the "NetBIOS over TCP/IP" driver is not described + networking support, use the “Selective Install for Networking” + object in the “System Setup” folder.

    Adding the “NetBIOS over TCP/IP” driver is not described in the manual and just barely in the online documentation. Start - MPTS.EXE, click on OK, click on "Configure LAPS" and click - on "IBM OS/2 NETBIOS OVER TCP/IP" in 'Protocols'. This line - is then moved to 'Current Configuration'. Select that line, - click on "Change number" and increase it from 0 to 1. Save this - configuration.

    If the Samba server(s) is not on your local subnet, you + MPTS.EXE, click on OK, click on Configure LAPS and click + on IBM OS/2 NETBIOS OVER TCP/IP in Protocols. This line + is then moved to Current Configuration. Select that line, + click on Change number and increase it from 0 to 1. Save this + configuration.

    If the Samba server is not on your local subnet, you can optionally add IP names and addresses of these servers - to the "Names List", or specify a WINS server ('NetBIOS - Nameserver' in IBM and RFC terminology). For Warp Connect you - may need to download an update for 'IBM Peer' to bring it on - the same level as Warp 4. See the webpage mentioned above.

    Configuring OS/2 Warp 3 (not Connect), - OS/2 1.2, 1.3 or 2.x for Samba

    You can use the free Microsoft LAN Manager 2.2c Client - for OS/2 from - - ftp://ftp.microsoft.com/BusSys/Clients/LANMAN.OS2/. - In - a nutshell, edit the file \OS2VER in the root directory of - the OS/2 boot partition and add the lines:

    +		to the Names List, or specify a  WINS server (NetBIOS 
    +		Nameserver in IBM and RFC terminology). For Warp Connect, you 
    +		may need to download an update for IBM Peer to bring it on 
    +		the same level as Warp 4. See the Web page mentioned above.

    Configuring Other Versions of OS/2

    This sections deals with configuring OS/2 Warp 3 (not Connect), OS/2 1.2, 1.3 or 2.x.

    You can use the free Microsoft LAN Manager 2.2c Client for OS/2 that is + available from + + ftp://ftp.microsoft.com/BusSys/Clients/LANMAN.OS2/. In a nutshell, edit + the file \OS2VER in the root directory of the OS/2 boot partition and add the lines:

     		20=setup.exe
     		20=netwksta.sys
     		20=netvdd.sys
    -		

    before you install the client. Also, don't use the - included NE2000 driver because it is buggy. Try the NE2000 - or NS2000 driver from - - ftp://ftp.cdrom.com/pub/os2/network/ndis/ instead. -

    Printer driver download for for OS/2 clients?

    First, create a share called [PRINTDRV] that is - world-readable. Copy your OS/2 driver files there. Note - that the .EA_ files must still be separate, so you will need - to use the original install files, and not copy an installed - driver from an OS/2 system.

    Install the NT driver first for that printer. Then, - add to your smb.conf a parameter, os2 driver map = filename. Then, in the file - specified by filename, map the - name of the NT driver name to the OS/2 driver name as - follows:

    nt driver name = os2 driver name.device name, e.g.:

    +

    before you install the client. Also, do not use the included NE2000 driver because it is buggy. + Try the NE2000 or NS2000 driver from + ftp://ftp.cdrom.com/pub/os2/network/ndis/ instead. +

    Printer Driver Download for OS/2 Clients

    Create a share called [PRINTDRV] that is + world-readable. Copy your OS/2 driver files there. The .EA_ + files must still be separate, so you will need to use the original install files + and not copy an installed driver from an OS/2 system.

    Install the NT driver first for that printer. Then, add to your smb.conf a parameter, + os2 driver map = filename. + Next, in the file specified by filename, map the + name of the NT driver name to the OS/2 driver name as follows:

    nt driver name = os2 driver name.device name, e.g.

    HP LaserJet 5L = LASERJET.HP LaserJet 5L

    You can have multiple drivers mapped in this file.

    If you only specify the OS/2 driver name, and not the device name, the first attempt to download the driver will actually download the files, but the OS/2 client will tell - you the driver is not available. On the second attempt, it - will work. This is fixed simply by adding the device name + you the driver is not available. On the second attempt, it + will work. This is fixed simply by adding the device name to the mapping, after which it will work on the first attempt. -

    Windows for Workgroups

    Latest TCP/IP stack from Microsoft

    Use the latest TCP/IP stack from Microsoft if you use Windows -for Workgroups. -

    The early TCP/IP stacks had lots of bugs.

    -Microsoft has released an incremental upgrade to their TCP/IP 32-Bit -VxD drivers. The latest release can be found on their ftp site at +

    Windows for Workgroups

    Latest TCP/IP Stack from Microsoft

    Use the latest TCP/IP stack from Microsoft if you use Windows +for Workgroups. The early TCP/IP stacks had lots of bugs.

    +Microsoft has released an incremental upgrade to their TCP/IP 32-bit +VxD drivers. The latest release can be found on their ftp site at ftp.microsoft.com, located in /peropsys/windows/public/tcpip/wfwt32.exe. There is an update.txt file there that describes the problems that were -fixed. New files include WINSOCK.DLL, +fixed. New files include WINSOCK.DLL, TELNET.EXE, WSOCK.386, VNBT.386, @@ -82,91 +68,93 @@ fixed. New files include WINSOCK.DLL, TRACERT.EXE, NETSTAT.EXE, and NBTSTAT.EXE. -

    Delete .pwl files after password change

    -WfWg does a lousy job with passwords. I find that if I change my -password on either the unix box or the PC the safest thing to do is to -delete the .pwl files in the windows directory. The PC will complain about not finding the files, but will soon get over it, allowing you to enter the new password. +

    Delete .pwl Files After Password Change

    +Windows for Workgroups does a lousy job with passwords. When you change passwords on either +the UNIX box or the PC, the safest thing to do is to delete the .pwl files in the Windows +directory. The PC will complain about not finding the files, but will soon get over it, +allowing you to enter the new password.

    -If you don't do this you may find that WfWg remembers and uses the old +If you do not do this, you may find that Windows for Workgroups remembers and uses the old password, even if you told it a new one.

    -Often WfWg will totally ignore a password you give it in a dialog box. -

    Configuring WfW password handling

    -There is a program call admincfg.exe -on the last disk (disk 8) of the WFW 3.11 disk set. To install it +Often Windows for Workgroups will totally ignore a password you give it in a dialog box. +

    Configuring Windows for Workgroups Password Handling

    +There is a program call admincfg.exe +on the last disk (disk 8) of the WFW 3.11 disk set. To install it, type EXPAND A:\ADMINCFG.EX_ C:\WINDOWS\ADMINCFG.EXE. -Then add an icon -for it via the Program Manager New Menu. -This program allows you to control how WFW handles passwords. ie disable Password Caching etc -for use with security = user -

    Case handling of passwords

    Windows for Workgroups uppercases the password before sending it to the server. Unix passwords can be case-sensitive though. Check the smb.conf information on password level to specify what characters samba should try to uppercase when checking.

    Use TCP/IP as default protocol

    To support print queue reporting you may find +Then add an icon for it via the Program Manager New Menu. +This program allows you to control how WFW handles passwords, i.e., +Disable Password Caching and so on. +for use with security = user. +

    Password Case Sensitivity

    Windows for Workgroups uppercases the password before sending it to the server. +UNIX passwords can be case-sensitive though. Check the smb.conf information on +password level to specify what characters +Samba should try to uppercase when checking.

    Use TCP/IP as Default Protocol

    To support print queue reporting, you may find that you have to use TCP/IP as the default protocol under -WfWg. For some reason if you leave NetBEUI as the default +Windows for Workgroups. For some reason, if you leave NetBEUI as the default, it may break the print queue reporting on some systems. -It is presumably a WfWg bug.

    Speed improvement

    +It is presumably a Windows for Workgroups bug.

    Speed Improvement

    Note that some people have found that setting DefaultRcvWindow in the [MSTCP] section of the -SYSTEM.INI file under WfWg to 3072 gives a -big improvement. I don't know why. +SYSTEM.INI file under Windows for Workgroups to 3072 gives a +big improvement.

    -My own experience with DefaultRcvWindow is that I get much better +My own experience with DefaultRcvWindow is that I get a much better performance with a large value (16384 or larger). Other people have reported that anything over 3072 slows things down enormously. One person even reported a speed drop of a factor of 30 when he went from -3072 to 8192. I don't know why. -

    Windows '95/'98

    -When using Windows 95 OEM SR2 the following updates are recommended where Samba -is being used. Please NOTE that the above change will affect you once these +3072 to 8192. +

    Windows 95/98

    +When using Windows 95 OEM SR2, the following updates are recommended where Samba +is being used. Please note that the above change will effect you once these updates have been installed.

    There are more updates than the ones mentioned here. You are referred to the Microsoft Web site for all currently available updates to your specific version of Windows 95.

    Kernel Update: KRNLUPD.EXE
    Ping Fix: PINGUPD.EXE
    RPC Update: RPCRTUPD.EXE
    TCP/IP Update: VIPUPD.EXE
    Redirector Update: VRDRUPD.EXE

    -Also, if using MS Outlook it is desirable to +Also, if using MS Outlook, it is desirable to install the OLEUPD.EXE fix. This fix may stop your machine from hanging for an extended period when exiting -Outlook and you may also notice a significant speedup when accessing network +Outlook and you may notice a significant speedup when accessing network neighborhood services. -

    Speed improvement

    -Configure the win95 TCPIP registry settings to give better -performance. I use a program called MTUSPEED.exe which I got off the -net. There are various other utilities of this type freely available. -

    Windows 2000 Service Pack 2

    +

    Speed Improvement

    +Configure the Windows 95 TCP/IP registry settings to give better +performance. I use a program called MTUSPEED.exe that I got off the +Internet. There are various other utilities of this type freely available. +

    Windows 2000 Service Pack 2

    There are several annoyances with Windows 2000 SP2. One of which only appears when using a Samba server to host user profiles -to Windows 2000 SP2 clients in a Windows domain. This assumes +to Windows 2000 SP2 clients in a Windows domain. This assumes that Samba is a member of the domain, but the problem will -likely occur if it is not. +most likely occur if it is not.

    In order to serve profiles successfully to Windows 2000 SP2 clients (when not operating as a PDC), Samba must have -nt acl support = no +nt acl support = no added to the file share which houses the roaming profiles. If this is not done, then the Windows 2000 SP2 client will complain about not being able to access the profile (Access Denied) and create multiple copies of it on disk (DOMAIN.user.001, -DOMAIN.user.002, etc...). See the -smb.conf man page -for more details on this option. Also note that the -nt acl support parameter was formally a global parameter in +DOMAIN.user.002, and so on). See the smb.conf man page +for more details on this option. Also note that the +nt acl support parameter was formally a global parameter in releases prior to Samba 2.2.2.

    -The following is a minimal profile share: -

    Example 38.1. Minimal profile share

    [profile]
    path = /export/profile
    create mask = 0600
    directory mask = 0700
    nt acl support = no
    read only = no

    -The reason for this bug is that the Win2k SP2 client copies -the security descriptor for the profile which contains -the Samba server's SID, and not the domain SID. The client + provides a minimal profile share. +

    Example 38.1. Minimal profile share

    [profile]
    path = /export/profile
    create mask = 0600
    directory mask = 0700
    nt acl support = no
    read only = no

    +The reason for this bug is that the Windows 200x SP2 client copies +the security descriptor for the profile that contains +the Samba server's SID, and not the domain SID. The client compares the SID for SAMBA\user and realizes it is -different that the one assigned to DOMAIN\user. Hence the reason +different from the one assigned to DOMAIN\user. Hence, the reason for the access denied message.

    -By disabling the nt acl support parameter, Samba will send -the Win2k client a response to the QuerySecurityDescriptor -trans2 call which causes the client to set a default ACL -for the profile. This default ACL includes -

    DOMAIN\user "Full Control">

    Note

    This bug does not occur when using winbind to -create accounts on the Samba host for Domain users.

    Windows NT 3.1

    If you have problems communicating across routers with Windows -NT 3.1 workstations, read this Microsoft Knowledge Base article. +By disabling the nt acl support parameter, Samba will send +the Windows 200x client a response to the QuerySecurityDescriptor trans2 call, which causes the client +to set a default ACL for the profile. This default ACL includes: +

    DOMAIN\user “Full Control>

    Note

    This bug does not occur when using Winbind to +create accounts on the Samba host for Domain users.

    Windows NT 3.1

    If you have problems communicating across routers with Windows +NT 3.1 workstations, read this Microsoft Knowledge Base article. -

    +

    diff --git a/docs/htmldocs/PolicyMgmt.html b/docs/htmldocs/PolicyMgmt.html index 754ca9b686..4adc7b6860 100644 --- a/docs/htmldocs/PolicyMgmt.html +++ b/docs/htmldocs/PolicyMgmt.html @@ -1,21 +1,24 @@ -Chapter 23. System and Account Policies

    Chapter 23. System and Account Policies

    John H. Terpstra

    Samba Team

    April 3 2003

    -This chapter summarises the current state of knowledge derived from personal -practice and knowledge from samba mailing list subscribers. Before reproduction -of posted information effort has been made to validate the information provided. +Chapter 23. System and Account Policies

    Chapter 23. System and Account Policies

    John H. Terpstra

    Samba Team

    April 3 2003

    +This chapter summarizes the current state of knowledge derived from personal +practice and knowledge from Samba mailing list subscribers. Before reproduction +of posted information, every effort has been made to validate the information given. Where additional information was uncovered through this validation it is provided also. -

    Features and Benefits

    -When MS Windows NT3.5 was introduced the hot new topic was the ability to implement -Group Policies for users and group. Then along came MS Windows NT4 and a few sites -started to adopt this capability. How do we know that? By way of the number of "booboos" +

    Features and Benefits

    +When MS Windows NT 3.5 was introduced, the hot new topic was the ability to implement +Group Policies for users and groups. Then along came MS Windows NT4 and a few sites +started to adopt this capability. How do we know that? By the number of “booboos” (or mistakes) administrators made and then requested help to resolve.

    + + + By the time that MS Windows 2000 and Active Directory was released, administrators got the message: Group Policies are a good thing! They can help reduce administrative -costs and actually can help to create happier users. But adoption of the true +costs and actually make happier users. But adoption of the true potential of MS Windows 200x Active Directory and Group Policy Objects (GPOs) for users -and machines were picked up on rather slowly. This was very obvious from the samba -mailing list as in 2000 and 2001 there were very few postings regarding GPOs and +and machines were picked up on rather slowly. This was obvious from the Samba +mailing list as in 2000 and 2001 when there were few postings regarding GPOs and how to replicate them in a Samba environment.

    Judging by the traffic volume since mid 2002, GPOs have become a standard part of @@ -23,245 +26,269 @@ the deployment in many sites. This chapter reviews techniques and methods that c be used to exploit opportunities for automation of control over user desktops and network client workstations.

    -A tool new to Samba may become an important part of the future Samba Administrators' -arsenal. The editreg tool is described in this document. -

    Creating and Managing System Policies

    +A tool new to Samba the editreg tool + may become an important part of the future Samba administrators' +arsenal is described in this document. +

    Creating and Managing System Policies

    Under MS Windows platforms, particularly those following the release of MS Windows -NT4 and MS Windows 95) it is possible to create a type of file that would be placed -in the NETLOGON share of a domain controller. As the client logs onto the network +NT4 and MS Windows 95, it is possible to create a type of file that would be placed +in the NETLOGON share of a Domain Controller. As the client logs onto the network, this file is read and the contents initiate changes to the registry of the client machine. This file allows changes to be made to those parts of the registry that affect users, groups of users, or machines.

    -For MS Windows 9x/Me this file must be called Config.POL and may + +For MS Windows 9x/ME, this file must be called Config.POL and may be generated using a tool called poledit.exe, better known as the Policy Editor. The policy editor was provided on the Windows 98 installation CD, but disappeared again with the introduction of MS Windows Me (Millennium Edition). From -comments from MS Windows network administrators it would appear that this tool became +comments of MS Windows network administrators, it would appear that this tool became a part of the MS Windows Me Resource Kit.

    + MS Windows NT4 Server products include the System Policy Editor -under the Start -> Programs -> Administrative Tools menu item. -For MS Windows NT4 and later clients this file must be called NTConfig.POL. +under Start -> Programs -> Administrative Tools. +For MS Windows NT4 and later clients, this file must be called NTConfig.POL.

    New with the introduction of MS Windows 2000 was the Microsoft Management Console -or MMC. This tool is the new wave in the ever changing landscape of Microsoft +or MMC. This tool is the new wave in the ever-changing landscape of Microsoft methods for management of network access and security. Every new Microsoft product -or technology seems to obsolete the old rules and to introduce newer and more -complex tools and methods. To Microsoft's credit though, the MMC does appear to +or technology seems to make the old rules obsolete and introduces newer and more +complex tools and methods. To Microsoft's credit, the MMC does appear to be a step forward, but improved functionality comes at a great price.

    -Before embarking on the configuration of network and system policies it is highly -advisable to read the documentation available from Microsoft's web site regarding - -Implementing Profiles and Policies in Windows NT 4.0 available from Microsoft. +Before embarking on the configuration of network and system policies, it is highly +advisable to read the documentation available from Microsoft's Web site regarding + +Implementing Profiles and Policies in Windows NT 4.0 available from Microsoft. There are a large number of documents in addition to this old one that should also -be read and understood. Try searching on the Microsoft web site for "Group Policies". +be read and understood. Try searching on the Microsoft Web site for “Group Policies”.

    -What follows is a very brief discussion with some helpful notes. The information provided -here is incomplete - you are warned. -

    Windows 9x/Me Policies

    - You need the Win98 Group Policy Editor to set Group Profiles up under Windows 9x/Me. - It can be found on the Original full product Win98 installation CD under - tools/reskit/netadmin/poledit. Install this using the - Add/Remove Programs facility and then click on the 'Have Disk' tab. +What follows is a brief discussion with some helpful notes. The information provided +here is incomplete you are warned. +

    Windows 9x/ME Policies

    + You need the Windows 98 Group Policy Editor to set up Group Profiles under Windows 9x/ME. + It can be found on the original full product Windows 98 installation CD under + tools/reskit/netadmin/poledit. Install this using the + Add/Remove Programs facility and then click on Have Disk.

    + Use the Group Policy Editor to create a policy file that specifies the location of - user profiles and/or the My Documents etc. Then save these + user profiles and/or My Documents, and so on. Then save these settings in a file called Config.POL that needs to be placed in the - root of the [NETLOGON] share. If Win98 is configured to log onto - the Samba Domain, it will automatically read this file and update the Win9x/Me registry + root of the [NETLOGON] share. If Windows 98 is configured to log onto + the Samba Domain, it will automatically read this file and update the Windows 9x/Me registry of the machine as it logs on.

    - Further details are covered in the Win98 Resource Kit documentation. + Further details are covered in the Windows 98 Resource Kit documentation.

    - If you do not take the right steps, then every so often Win9x/Me will check the - integrity of the registry and will restore it's settings from the back-up - copy of the registry it stores on each Win9x/Me machine. Hence, you will + If you do not take the correct steps, then every so often Windows 9x/ME will check the + integrity of the registry and restore its settings from the back-up + copy of the registry it stores on each Windows 9x/ME machine. So, you will occasionally notice things changing back to the original settings.

    - Install the group policy handler for Win9x to pick up group policies. Look on the - Win98 CD in \tools\reskit\netadmin\poledit. - Install group policies on a Win9x client by double-clicking + Install the group policy handler for Windows 9x/Me to pick up Group Policies. Look on the + Windows 98 CDROM in \tools\reskit\netadmin\poledit. + Install group policies on a Windows 9x/Me client by double-clicking on grouppol.inf. Log off and on again a couple of times and see - if Win98 picks up group policies. Unfortunately this needs to be done on every - Win9x/Me machine that uses group policies. -

    Windows NT4 Style Policy Files

    + if Windows 98 picks up Group Policies. Unfortunately, this needs to be done on every + Windows 9x/Me machine that uses Group Policies. +

    Windows NT4-Style Policy Files

    To create or edit ntconfig.pol you must use the NT Server - Policy Editor, poledit.exe which is included with NT4 Server - but not NT Workstation. There is a Policy Editor on a NT4 - Workstation but it is not suitable for creating Domain Policies. - Further, although the Windows 95 Policy Editor can be installed on an NT4 + Policy Editor, poledit.exe, which is included with NT4 Server + but not with NT Workstation. There is a Policy Editor on an NT4 + Workstation but it is not suitable for creating domain policies. + Furthermore, although the Windows 95 Policy Editor can be installed on an NT4 Workstation/Server, it will not work with NT clients. However, the files from the NT Server will run happily enough on an NT4 Workstation.

    You need poledit.exe, common.adm and winnt.adm. - It is convenient to put the two *.adm files in the c:\winnt\inf - directory which is where the binary will look for them unless told otherwise. Note also that that - directory is normally 'hidden'. + It is convenient to put the two *.adm files in the c:\winnt\inf + directory, which is where the binary will look for them unless told otherwise. This + directory is normally “hidden.

    The Windows NT policy editor is also included with the Service Pack 3 (and later) for Windows NT 4.0. Extract the files using servicepackname /x, - i.e. that's Nt4sp6ai.exe /x for service pack 6a. The policy editor, - poledit.exe and the associated template files (*.adm) should - be extracted as well. It is also possible to downloaded the policy template - files for Office97 and get a copy of the policy editor. Another possible + that's Nt4sp6ai.exe /x for service pack 6a. The Policy Editor, + poledit.exe, and the associated template files (*.adm) should + be extracted as well. It is also possible to downloaded the policy template + files for Office97 and get a copy of the Policy Editor. Another possible location is with the Zero Administration Kit available for download from Microsoft. -

    Registry Spoiling

    - With NT4 style registry based policy changes, a large number of settings are not - automatically reversed as the user logs off. Since the settings that were in the - NTConfig.POL file were applied to the client machine registry and that apply to the +

    Registry Spoiling

    + With NT4-style registry-based policy changes, a large number of settings are not + automatically reversed as the user logs off. The settings that were in the + NTConfig.POL file were applied to the client machine registry and apply to the hive key HKEY_LOCAL_MACHINE are permanent until explicitly reversed. This is known - as tattooing. It can have serious consequences down-stream and the administrator must + as tattooing. It can have serious consequences downstream and the administrator must be extremely careful not to lock out the ability to manage the machine at a later date. -

    MS Windows 200x / XP Professional Policies

    - Windows NT4 System policies allows setting of registry parameters specific to - users, groups and computers (client workstations) that are members of the NT4 - style domain. Such policy file will work with MS Windows 2000 / XP clients also. +

    MS Windows 200x/XP Professional Policies

    + Windows NT4 system policies allow the setting of registry parameters specific to + users, groups and computers (client workstations) that are members of the NT4-style + domain. Such policy files will work with MS Windows 200x/XP clients also.

    - New to MS Windows 2000 Microsoft introduced a new style of group policy that confers - a superset of capabilities compared with NT4 style policies. Obviously, the tool used - to create them is different, and the mechanism for implementing them is much changed. + New to MS Windows 2000, Microsoft recently introduced a style of group policy that confers + a superset of capabilities compared with NT4-style policies. Obviously, the tool used + to create them is different, and the mechanism for implementing them is much improved.

    - The older NT4 style registry based policies are known as Administrative Templates - in MS Windows 2000/XP Group Policy Objects (GPOs). The later includes ability to set various security + + The older NT4-style registry-based policies are known as Administrative Templates + in MS Windows 2000/XP Group Policy Objects (GPOs). The later includes the ability to set various security configurations, enforce Internet Explorer browser settings, change and redirect aspects of the - users' desktop (including: the location of My Documents files (directory), as + users desktop (including the location of My Documents files (directory), as well as intrinsics of where menu items will appear in the Start menu). An additional new feature is the ability to make available particular software Windows applications to particular users and/or groups.

    - Remember: NT4 policy files are named NTConfig.POL and are stored in the root - of the NETLOGON share on the domain controllers. A Windows NT4 user enters a username, a password - and selects the domain name to which the logon will attempt to take place. During the logon - process the client machine reads the NTConfig.POL file from the NETLOGON share on the authenticating - server, modifies the local registry values according to the settings in this file. + Remember, NT4 policy files are named NTConfig.POL and are stored in the root + of the NETLOGON share on the Domain Controllers. A Windows NT4 user enters a username, password + and selects the domain name to which the logon will attempt to take place. During the logon process, + the client machine reads the NTConfig.POL file from the NETLOGON share on + the authenticating server and modifies the local registry values according to the settings in this file.

    - Windows 2K GPOs are very feature rich. They are NOT stored in the NETLOGON share, rather part of + Windows 200x GPOs are feature-rich. They are not stored in the NETLOGON share, but rather part of a Windows 200x policy file is stored in the Active Directory itself and the other part is stored in a shared (and replicated) volume called the SYSVOL folder. This folder is present on all Active - Directory domain controllers. The part that is stored in the Active Directory itself is called the - group policy container (GPC), and the part that is stored in the replicated share called SYSVOL is - known as the group policy template (GPT). + Directory Domain Controllers. The part that is stored in the Active Directory itself is called the + Group Policy Container (GPC), and the part that is stored in the replicated share called SYSVOL is + known as the Group Policy Template (GPT).

    - With NT4 clients the policy file is read and executed upon only as each user logs onto the network. - MS Windows 200x policies are much more complex - GPOs are processed and applied at client machine - startup (machine specific part) and when the user logs onto the network the user specific part - is applied. In MS Windows 200x style policy management each machine and/or user may be subject + With NT4 clients, the policy file is read and executed only as each user logs onto the network. + MS Windows 200x policies are much more complex GPOs are processed and applied at client machine + startup (machine specific part) and when the user logs onto the network, the user-specific part + is applied. In MS Windows 200x-style policy management, each machine and/or user may be subject to any number of concurrently applicable (and applied) policy sets (GPOs). Active Directory allows the administrator to also set filters over the policy settings. No such equivalent capability - exists with NT4 style policy files. -

    Administration of Win2K / XP Policies

    + exists with NT4-style policy files. +

    Administration of Windows 200x/XP Policies

    + + Instead of using the tool called The System Policy Editor, commonly called Poledit (from the executable name poledit.exe), GPOs are created and managed using a Microsoft Management Console (MMC) snap-in as follows:

    1. - Go to the Windows 200x / XP menu Start->Programs->Administrative Tools - and select the MMC snap-in called Active Directory Users and Computers -

    2. - Select the domain or organizational unit (OU) that you wish to manage, then right click - to open the context menu for that object, select the properties item. -

    3. - Now left click on the Group Policy tab, then left click on the New tab. Type a name - for the new policy you will create. -

    4. - Now left click on the Edit tab to commence the steps needed to create the GPO. -

    + Go to the Windows 200x/XP menu Start->Programs->Administrative Tools + and select the MMC snap-in called Active Directory Users and Computers +

  • + Select the domain or organizational unit (OU) that you wish to manage, then right-click + to open the context menu for that object, and select the Properties. +

  • + Left-click on the Group Policy tab, then + left-click on the New tab. Type a name + for the new policy you will create. +

  • + Left-click on the Edit tab to commence the steps needed to create the GPO. +

  • All policy configuration options are controlled through the use of policy administrative - templates. These files have a .adm extension, both in NT4 as well as in Windows 200x / XP. - Beware however, since the .adm files are NOT interchangeable across NT4 and Windows 200x. - The later introduces many new features as well as extended definition capabilities. It is - well beyond the scope of this documentation to explain how to program .adm files, for that + templates. These files have an .adm extension, both in NT4 as well as in Windows 200x/XP. + Beware, however, the .adm files are not interchangeable across NT4 and Windows 200x. + The latter introduces many new features as well as extended definition capabilities. It is + well beyond the scope of this documentation to explain how to program .adm files; for that the administrator is referred to the Microsoft Windows Resource Kit for your particular version of MS Windows.

    Note

    The MS Windows 2000 Resource Kit contains a tool called gpolmig.exe. This tool can be used to migrate an NT4 NTConfig.POL file into a Windows 200x style GPO. Be VERY careful how you use this powerful tool. Please refer to the resource kit manuals for specific usage information. -

    Managing Account/User Policies

    +

    Managing Account/User Policies

    Policies can define a specific user's settings or the settings for a group of users. The resulting policy file contains the registry settings for all users, groups, and computers that will be using the policy file. Separate policy files for each user, group, or computer are not necessary.

    -If you create a policy that will be automatically downloaded from validating domain controllers, -you should name the file NTconfig.POL. As system administrator, you have the option of renaming the + +If you create a policy that will be automatically downloaded from validating Domain Controllers, +you should name the file NTConfig.POL. As system administrator, you have the option of renaming the policy file and, by modifying the Windows NT-based workstation, directing the computer to update the policy from a manual path. You can do this by either manually changing the registry or by using -the System Policy Editor. This path can even be a local path such that each machine has its own policy file, -but if a change is necessary to all machines, this change must be made individually to each workstation. +the System Policy Editor. This can even be a local path such that each machine has its own policy file, +but if a change is necessary to all machines, it must be made individually to each workstation.

    -When a Windows NT4/200x/XP machine logs onto the network the NETLOGON share on the authenticating domain -controller for the presence of the NTConfig.POL file. If one exists it is downloaded, parsed and then -applied to the user's part of the registry. +When a Windows NT4/200x/XP machine logs onto the network, the client looks in the NETLOGON share on +the authenticating domain controller for the presence of the NTConfig.POL file. If one exists it is +downloaded, parsed and then applied to the user's part of the registry.

    -MS Windows 200x/XP clients that log onto an MS Windows Active Directory security domain may additionally, + +MS Windows 200x/XP clients that log onto an MS Windows Active Directory security domain may additionally acquire policy settings through Group Policy Objects (GPOs) that are defined and stored in Active Directory itself. The key benefit of using AS GPOs is that they impose no registry spoiling effect. -This has considerable advantage compared with the use of NTConfig.POL (NT4) style policy updates. +This has considerable advantage compared with the use of NTConfig.POL (NT4) style policy updates.

    In addition to user access controls that may be imposed or applied via system and/or group policies in a manner that works in conjunction with user profiles, the user management environment under MS Windows NT4/200x/XP allows per domain as well as per user account restrictions to be applied. -Common restrictions that are frequently used includes: +Common restrictions that are frequently used include:

    -

    • Logon Hours

    • Password Aging

    • Permitted Logon from certain machines only

    • Account type (Local or Global)

    • User Rights

    -

    Samba Editreg Toolset

    + +

    • Logon hours
    • Password aging
    • Permitted logon from certain machines only
    • Account type (local or global)
    • User rights

    +

    +Samba-3.0.0 doe not yet implement all account controls that are common to MS Windows NT4/200x/XP. +While it is possible to set many controls using the Domain User Manager for MS Windows NT4, only password +expirey is functional today. Most of the remaining controls at this time have only stub routines +that may eventually be completed to provide actual control. Do not be misled by the fact that a +parameter can be set using the NT4 Domain User Manager or in the NTConfig.POL. +

    Management Tools

    +Anyone who wishes to create or manage Group Policies will need to be familiar with a number of tools. +The following sections describe a few key tools that will help you to create a low maintenance user +environment. +

    Samba Editreg Toolset

    + + + A new tool called editreg is under development. This tool can be used - to edit registry files (called NTUser.DAT) that are stored in user and group profiles. - NTConfig.POL files have the same structure as the NTUser.DAT file and can be editted using - this tool. editreg is being built with the intent to enable NTConfig.POL - files to be saved in text format and to permit the building of new NTConfig.POL files with - extended capabilities. It is proving difficult to realise this capability, so do not be surprised - if this feature does not materialise. Formal capabilities will be announced at the time that - this tool is released for production use. -

    Windows NT4/200x

    + to edit registry files (called NTUser.DAT) that are stored in user + and group profiles. NTConfig.POL files have the same structure as the + NTUser.DAT file and can be edited using this tool. editreg + is being built with the intent to enable NTConfig.POL files to be saved in text format and to + permit the building of new NTConfig.POL files with extended capabilities. It is proving difficult + to realize this capability, so do not be surprised if this feature does not materialize. Formal + capabilities will be announced at the time that this tool is released for production use. +

    Windows NT4/200x

    The tools that may be used to configure these types of controls from the MS Windows environment are: - The NT4 User Manager for domains, the NT4 System and Group Policy Editor, the registry editor (regedt32.exe). - Under MS Windows 200x/XP this is done using the Microsoft Management Console (MMC) with appropriate - "snap-ins", the registry editor, and potentially also the NT4 System and Group Policy Editor. -

    Samba PDC

    - With a Samba Domain Controller, the new tools for managing of user account and policy information includes: + the NT4 User Manager for Domains, the NT4 System and Group Policy Editor, and the Registry Editor (regedt32.exe). + Under MS Windows 200x/XP, this is done using the Microsoft Management Console (MMC) with appropriate + “snap-ins,” the registry editor, and potentially also the NT4 System and Group Policy Editor. +

    Samba PDC

    + With a Samba Domain Controller, the new tools for managing user account and policy information include: smbpasswd, pdbedit, net, rpcclient. - The administrator should read the - man pages for these tools and become familiar with their use. -

    System Startup and Logon Processing Overview

    -The following attempts to document the order of processing of system and user policies following a system + The administrator should read the man pages for these tools and become familiar with their use. +

    System Startup and Logon Processing Overview

    +The following attempts to document the order of processing the system and user policies following a system reboot and as part of the user logon:

    1. Network starts, then Remote Procedure Call System Service (RPCSS) and Multiple Universal Naming - Convention Provider (MUP) start + Convention Provider (MUP) start.

    2. Where Active Directory is involved, an ordered list of Group Policy Objects (GPOs) is downloaded and applied. The list may include GPOs that: -

      • Apply to the location of machines in a Directory

      • Apply only when settings have changed

      • Depend on configuration of scope of applicability: local, site, domain, organizational unit, etc.

      +

      • Apply to the location of machines in a Directory.

      • Apply only when settings have changed.

      • Depend on configuration of the scope of applicability: local, + site, domain, organizational unit, and so on.

      No desktop user interface is presented until the above have been processed.

    3. Execution of start-up scripts (hidden and synchronous by default).

    4. - A keyboard action to affect start of logon (Ctrl-Alt-Del). + A keyboard action to effect start of logon (Ctrl-Alt-Del).

    5. - User credentials are validated, User profile is loaded (depends on policy settings). + User credentials are validated, user profile is loaded (depends on policy settings).

    6. - An ordered list of User GPOs is obtained. The list contents depends on what is configured in respect of: + An ordered list of user GPOs is obtained. The list contents depends on what is configured in respect of: -

      • Is user a domain member, thus subject to particular policies

      • Loopback enablement, and the state of the loopback policy (Merge or Replace)

      • Location of the Active Directory itself

      • Has the list of GPOs changed. No processing is needed if not changed.

      +

      • Is the user a Domain Member, thus subject to particular policies?
      • Loopback enablement, and the state of the loopback policy (Merge or Replace).
      • Location of the Active Directory itself.
      • Has the list of GPOs changed? No processing is needed if not changed.

    7. User Policies are applied from Active Directory. Note: There are several types.

    8. - Logon scripts are run. New to Win2K and Active Directory, logon scripts may be obtained based on Group - Policy objects (hidden and executed synchronously). NT4 style logon scripts are then run in a normal + Logon scripts are run. New to Windows 200x and Active Directory, logon scripts may be obtained based on Group + Policy objects (hidden and executed synchronously). NT4-style logon scripts are then run in a normal window.

    9. - The User Interface as determined from the GPOs is presented. Note: In a Samba domain (like and NT4 - Domain) machine (system) policies are applied at start-up, User policies are applied at logon. -

    Common Errors

    -Policy related problems can be very difficult to diagnose and even more difficult to rectify. The following + The User Interface as determined from the GPOs is presented. Note: In a Samba domain (like an NT4 + Domain), machine (system) policies are applied at start-up; user policies are applied at logon. +

    Common Errors

    +Policy-related problems can be quite difficult to diagnose and even more difficult to rectify. The following collection demonstrates only basic issues. -

    Policy Does Not Work

    - “We have created the config.pol file and put it in the NETLOGON share. -It has made no difference to our Win XP Pro machines, they just don't see it. IT worked fine with Win 98 but does not +

    Policy Does Not Work

    +“We have created the Config.POL file and put it in the NETLOGON share. +It has made no difference to our Win XP Pro machines, they just do not see it. It worked fine with Win 98 but does not work any longer since we upgraded to Win XP Pro. Any hints?

    -Policy files are NOT portable between Windows 9x / Me and MS Windows NT4 / 200x / XP based -platforms. You need to use the NT4 Group Policy Editor to create a file called NTConfig.POL so that -it is in the correct format for your MS Windows XP Pro clients. -

    +Policy files are not portable between Windows 9x/Me and MS Windows NT4/200x/XP-based platforms. You need to +use the NT4 Group Policy Editor to create a file called NTConfig.POL so it is in the +correct format for your MS Windows XP Pro clients. +

    diff --git a/docs/htmldocs/Portability.html b/docs/htmldocs/Portability.html index 50d14207d0..3451a8bd17 100644 --- a/docs/htmldocs/Portability.html +++ b/docs/htmldocs/Portability.html @@ -1,47 +1,52 @@ -Chapter 37. Portability

    Chapter 37. Portability

    Jelmer R. Vernooij

    The Samba Team

    Samba works on a wide range of platforms but the interface all the +Chapter 37. Portability

    Chapter 37. Portability

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Samba works on a wide range of platforms but the interface all the platforms provide is not always compatible. This chapter contains -platform-specific information about compiling and using samba.

    HPUX

    -HP's implementation of supplementary groups is, er, non-standard (for -hysterical reasons). There are two group files, /etc/group and +platform-specific information about compiling and using Samba.

    HPUX

    +HP's implementation of supplementary groups is non-standard (for +historical reasons). There are two group files, /etc/group and /etc/logingroup; the system maps UIDs to numbers using the former, but -initgroups() reads the latter. Most system admins who know the ropes +initgroups() reads the latter. Most system admins who know the ropes symlink /etc/group to /etc/logingroup -(hard link doesn't work for reasons too stupid to go into here). initgroups() will complain if one of the +(hard link does not work for reasons too obtuse to go into here). initgroups() will complain if one of the groups you're in in /etc/logingroup has what it considers to be an invalid ID, which means outside the range [0..UID_MAX], where UID_MAX is (I think) -60000 currently on HP-UX. This precludes -2 and 65534, the usual nobody +60000 currently on HP-UX. This precludes -2 and 65534, the usual nobody GIDs.

    -If you encounter this problem, make sure that the programs that are failing -to initgroups() be run as users not in any groups with GIDs outside the +If you encounter this problem, make sure the programs that are failing +to initgroups() are run as users, not in any groups with GIDs outside the allowed range.

    This is documented in the HP manual pages under setgroups(2) and passwd(4).

    -On HPUX you must use gcc or the HP ANSI compiler. The free compiler -that comes with HP-UX is not ANSI compliant and cannot compile -Samba. -

    SCO UNIX

    -If you run an old version of SCO UNIX then you may need to get important +On HP-UX you must use gcc or the HP ANSI compiler. The free compiler +that comes with HP-UX is not ANSI compliant and cannot compile Samba. +

    SCO UNIX

    +If you run an old version of SCO UNIX, you may need to get important TCP/IP patches for Samba to work correctly. Without the patch, you may -encounter corrupt data transfers using samba. +encounter corrupt data transfers using Samba.

    The patch you need is UOD385 Connection Drivers SLS. It is available from -SCO (ftp.sco.com, directory SLS, +SCO (ftp.sco.com, directory SLS, files uod385a.Z and uod385a.ltr.Z). -

    DNIX

    +

    +The information provided here refers to an old version of SCO UNIX. If you require +binaries for more recent SCO UNIX products, please contact SCO to obtain packages that are +ready to install. You should also verify with SCO that your platform is up-to-date for the +binary packages you will install. This is important if you wish to avoid data corruption +problems with your installation. To build Samba for SCO UNIX products may +require significant patching of Samba source code. It is much easier to obtain binary +packages directly from SCO. +

    DNIX

    DNIX has a problem with seteuid() and setegid(). These routines are needed for Samba to work correctly, but they were left out of the DNIX C library for some reason.

    For this reason Samba by default defines the macro NO_EID in the DNIX section of includes.h. This works around the problem in a limited way, -but it is far from ideal, some things still won't work right. +but it is far from ideal, and some things still will not work right.

    -To fix the problem properly you need to assemble the following two +To fix the problem properly, you need to assemble the following two functions and then either add them to your C library or link them into -Samba. -

    -put this in the file setegid.s: +Samba. Put the following in the file setegid.s:

             .globl  _setegid
     _setegid:
    @@ -56,7 +61,7 @@ _setegid:
             clrl    d0
             rts
     

    -put this in the file seteuid.s: +Put this in the file seteuid.s:

             .globl  _seteuid
     _seteuid:
    @@ -71,7 +76,7 @@ _seteuid:
             clrl    d0
             rts
     

    -after creating the above files you then assemble them using +After creating the above files, you then assemble them using

     $ as seteuid.s
     $ as setegid.s
    @@ -79,7 +84,7 @@ after creating the above files you then assemble them using
     that should produce the files seteuid.o and 
     setegid.o
     

    -then you need to add these to the LIBSM line in the DNIX section of +Then you need to add these to the LIBSM line in the DNIX section of the Samba Makefile. Your LIBSM line will then look something like this:

     LIBSM = setegid.o seteuid.o -ln
    @@ -87,25 +92,25 @@ LIBSM = setegid.o seteuid.o -ln
     You should then remove the line:
     

     #define NO_EID
    -

    from the DNIX section of includes.h

    RedHat Linux Rembrandt-II

    -By default RedHat Rembrandt-II during installation adds an +

    from the DNIX section of includes.h.

    Red Hat Linux

    +By default during installation, some versions of Red Hat Linux add an entry to /etc/hosts as follows:

    -	127.0.0.1 loopback "hostname"."domainname"
    +	127.0.0.1 loopback "hostname"."domainname"
     

    This causes Samba to loop back onto the loopback interface. The result is that Samba fails to communicate correctly with -the world and therefor may fail to correctly negotiate who +the world and therefore may fail to correctly negotiate who is the master browse list holder and who is the master browser.

    -Corrective Action: Delete the entry after the word loopback - in the line starting 127.0.0.1 -

    AIX

    Sequential Read Ahead

    +Corrective Action: Delete the entry after the word "loopback" +in the line starting 127.0.0.1. +

    AIX

    Sequential Read Ahead

    Disabling Sequential Read Ahead using vmtune -r 0 improves Samba performance significantly. -

    Solaris

    Locking improvements

    Some people have been experiencing problems with F_SETLKW64/fcntl -when running Samba on Solaris. The built in file locking mechanism was +

    Solaris

    Locking Improvements

    Some people have been experiencing problems with F_SETLKW64/fcntl +when running Samba on Solaris. The built-in file locking mechanism was not scalable. Performance would degrade to the point where processes would get into loops of trying to lock a file. It would try a lock, then fail, then try again. The lock attempt was failing before the grant was @@ -116,13 +121,12 @@ be stuck if F_SETLKW64 loops. Sun released patches for Solaris 2.6, 8, and 9. The patch for Solaris 7 has not been released yet.

    -The patch revision for 2.6 is 105181-34 -for 8 is 108528-19 and for 9 is 112233-04 +The patch revision for 2.6 is 105181-34, for 8 is 108528-19 and for 9 is 112233-04.

    -After the install of these patches it is recommended to reconfigure -and rebuild samba. -

    Thanks to Joe Meslovich for reporting

    Winbind on Solaris 9

    -Nsswitch on Solaris 9 refuses to use the winbind nss module. This behavior -is fixed by Sun in patch 113476-05 which as of March 2003 is not in any +After the install of these patches, it is recommended to reconfigure +and rebuild Samba. +

    Thanks to Joe Meslovich for reporting this.

    Winbind on Solaris 9

    +Nsswitch on Solaris 9 refuses to use the Winbind NSS module. This behavior +is fixed by Sun in patch 113476-05, which as of March 2003, is not in any roll-up packages. -

    +

    diff --git a/docs/htmldocs/ProfileMgmt.html b/docs/htmldocs/ProfileMgmt.html index 765ae4b0c4..9947526194 100644 --- a/docs/htmldocs/ProfileMgmt.html +++ b/docs/htmldocs/ProfileMgmt.html @@ -1,652 +1,443 @@ -Chapter 24. Desktop Profile Management

    Chapter 24. Desktop Profile Management

    John H. Terpstra

    Samba Team

    April 3 2003

    Features and Benefits

    -Roaming Profiles are feared by some, hated by a few, loved by many, and a Godsend for +Chapter 24. Desktop Profile Management

    Chapter 24. Desktop Profile Management

    John H. Terpstra

    Samba Team

    April 3 2003

    Features and Benefits

    +Roaming profiles are feared by some, hated by a few, loved by many, and a Godsend for some administrators.

    -Roaming Profiles allow an administrator to make available a consistent user desktop +Roaming profiles allow an administrator to make available a consistent user desktop as the user moves from one machine to another. This chapter provides much information -regarding how to configure and manage Roaming Profiles. +regarding how to configure and manage roaming profiles.

    -While Roaming Profiles might sound like nirvana to some, they are a real and tangible +While roaming profiles might sound like nirvana to some, they are a real and tangible problem to others. In particular, users of mobile computing tools, where often there may not -be a sustained network connection, are often better served by purely Local Profiles. -This chapter provides information to help the Samba administrator to deal with those -situations also. -

    Roaming Profiles

    Warning

    -Roaming profiles support is different for Win9x / Me and Windows NT4/200x. +be a sustained network connection, are often better served by purely local profiles. +This chapter provides information to help the Samba administrator deal with those +situations. +

    Roaming Profiles

    Warning

    +Roaming profiles support is different for Windows 9x/Me and Windows NT4/200x.

    Before discussing how to configure roaming profiles, it is useful to see how -Windows 9x / Me and Windows NT4/200x clients implement these features. +Windows 9x/Me and Windows NT4/200x clients implement these features.

    -Windows 9x / Me clients send a NetUserGetInfo request to the server to get the user's +Windows 9x/Me clients send a NetUserGetInfo request to the server to get the user's profiles location. However, the response does not have room for a separate -profiles location field, only the user's home share. This means that Win9X/Me +profiles location field, only the user's home share. This means that Windows 9x/Me profiles are restricted to being stored in the user's home directory.

    -Windows NT4/200x clients send a NetSAMLogon RPC request, which contains many fields, +Windows NT4/200x clients send a NetSAMLogon RPC request, which contains many fields including a separate field for the location of the user's profiles. -

    Samba Configuration for Profile Handling

    +

    Samba Configuration for Profile Handling

    This section documents how to configure Samba for MS Windows client profile support. -

    NT4/200x User Profiles

    -To support Windows NT4/200x clients, in the [global] section of smb.conf set the -following (for example): +

    NT4/200x User Profiles

    +For example, to support Windows NT4/200x clients, set the followoing in the [global] section of the smb.conf file:

    logon path = \\profileserver\profileshare\profilepath\%U\moreprofilepath

    - This is typically implemented like: +This is typically implemented like:

    logon path = \\%L\Profiles\%u

    -where %L translates to the name of the Samba server and %u translates to the user name +where “%L” translates to the name of the Samba server and “%u” translates to the user name.

    -The default for this option is \\%N\%U\profile, -namely \\sambaserver\username\profile. -The \\N%\%U service is created automatically by the [homes] service. If you are using -a samba server for the profiles, you _must_ make the share specified in the logon path +The default for this option is \\%N\%U\profile, namely \\sambaserver\username\profile. +The \\N%\%U service is created automatically by the [homes] service. If you are using +a Samba server for the profiles, you must make the share that is specified in the logon path browseable. Please refer to the man page for smb.conf in respect of the different -semantics of %L and %N, as well as %U and %u. +semantics of “%L” and “%N”, as well as “%U” and “%u”.

    Note

    -MS Windows NT/2K clients at times do not disconnect a connection to a server -between logons. It is recommended to NOT use the homes -meta-service name as part of the profile share path. -

    Windows 9x / Me User Profiles

    - To support Windows 9x / Me clients, you must use the logon home parameter. Samba has -now been fixed so that net use /home now works as well, and it, too, relies +MS Windows NT/200x clients at times do not disconnect a connection to a server between logons. It is recommended +to not use the homes meta-service name as part of the profile share path. +

    Windows 9x/Me User Profiles

    +To support Windows 9x/Me clients, you must use the logon home +parameter. Samba has been fixed so net use /home now works as well and it, too, relies on the logon home parameter.

    -By using the logon home parameter, you are restricted to putting Win9x / Me -profiles in the user's home directory. But wait! There is a trick you -can use. If you set the following in the [global] section of your smb.conf file: +By using the logon home parameter, you are restricted to putting Windows 9x/Me profiles in the user's home +directory. But wait! There is a trick you can use. If you set the following in the +[global] section of your smb.conf file:

    logon home = \\%L\%U\.profiles

    -then your Windows 9x / Me clients will dutifully put their clients in a subdirectory -of your home directory called .profiles (thus making them hidden). +then your Windows 9x/Me clients will dutifully put their clients in a subdirectory +of your home directory called .profiles (making them hidden).

    -Not only that, but net use /home will also work, because of a feature in -Windows 9x / Me. It removes any directory stuff off the end of the home directory area +Not only that, but net use /home will also work because of a feature in +Windows 9x/Me. It removes any directory stuff off the end of the home directory area and only uses the server and share portion. That is, it looks like you -specified \\%L\%U for logon home. -

    Mixed Windows 9x / Me and Windows NT4/200x User Profiles

    -You can support profiles for both Win9X and WinNT clients by setting both the -logon home and logon path parameters. For example: -

    logon home = \\%L\%u\.profiles
    logon path = \\%L\profiles\%u

    Disabling Roaming Profile Support

    - A question often asked is “How may I enforce use of local profiles?” or - “How do I disable Roaming Profiles?” -

    +specified \\%L\%U for logon home. +

    Mixed Windows 9x/Me and Windows NT4/200x User Profiles

    +You can support profiles for Windows 9x and Windows NT clients by setting both the +logon home and logon path parameters. For example: +

    logon home = \\%L\%u\.profiles
    logon path = \\%L\profiles\%u

    Disabling Roaming Profile Support

    +A question often asked is: “How may I enforce use of local profiles?” or +“How do I disable roaming profiles?” +

    + There are three ways of doing this: +

    In smb.conf

    - Affect the following settings and ALL clients - will be forced to use a local profile: -

    logon home
    logon path

    -

    MS Windows Registry:

    - By using the Microsoft Management Console gpedit.msc to instruct your MS Windows XP machine to use only a local profile. This of course modifies registry settings. The full path to the option is: - - -

    -	Local Computer Policy\
    -		Computer Configuration\
    -			Administrative Templates\
    -				System\
    -					User Profiles\
    +		Affect the following settings and ALL clients will be forced to use a local profile:
    +		logon home and logon path
    +		

    MS Windows Registry

    + By using the Microsoft Management Console gpedit.msc to instruct your MS Windows XP + machine to use only a local profile. This, of course, modifies registry settings. The full + path to the option is: +

    +Local Computer Policy\
    +	Computer Configuration\
    +		Administrative Templates\
    +			System\
    +				User Profiles\
     
    -	Disable:	Only Allow Local User Profiles
    -	Disable:	Prevent Roaming Profile Change from Propagating to the Server
    -	

    -

    Change of Profile Type:

    - From the start menu right click on the - My Computer icon, select Properties, click on the User Profiles - tab, select the profile you wish to change from Roaming type to Local, click Change Type. +Disable: Only Allow Local User Profiles +Disable: Prevent Roaming Profile Change from Propagating to the Server +

    +

    Change of Profile Type:

    From the start menu right-click on My Computer icon, + select Properties, click on the User Profiles + tab, select the profile you wish to change from + Roaming type to Local, and click on + Change Type.

    -Consult the MS Windows registry guide for your particular MS Windows version for more -information about which registry keys to change to enforce use of only local user -profiles. +Consult the MS Windows registry guide for your particular MS Windows version for more information +about which registry keys to change to enforce use of only local user profiles.

    Note

    The specifics of how to convert a local profile to a roaming profile, or a roaming profile -to a local one vary according to the version of MS Windows you are running. Consult the -Microsoft MS Windows Resource Kit for your version of Windows for specific information. -

    Windows Client Profile Configuration Information

    Windows 9x / Me Profile Setup

    -When a user first logs in on Windows 9X, the file user.DAT is created, -as are folders Start Menu, Desktop, -Programs and Nethood. -These directories and their contents will be merged with the local -versions stored in c:\windows\profiles\username on subsequent logins, -taking the most recent from each. You will need to use the [global] -options preserve case = yes, short preserve case = yes and -case sensitive = no in order to maintain capital letters in shortcuts -in any of the profile folders. -

    -The user.DAT file contains all the user's preferences. If you wish to -enforce a set of preferences, rename their user.DAT file to user.MAN, -and deny them write access to this file. +to a local one vary according to the version of MS Windows you are running. Consult the Microsoft MS +Windows Resource Kit for your version of Windows for specific information. +

    Windows Client Profile Configuration Information

    Windows 9x/Me Profile Setup

    +When a user first logs in on Windows 9X, the file user.DAT is created, as are folders +Start Menu, Desktop, Programs, and +Nethood. These directories and their contents will be merged with the local +versions stored in c:\windows\profiles\username on subsequent logins, taking the +most recent from each. You will need to use the [global] options +preserve case = yes, +short preserve case = yes and +case sensitive = no +in order to maintain capital letters in shortcuts in any of the profile folders. +

    +The user.DAT file contains all the user's preferences. If you wish to enforce a set of preferences, +rename their user.DAT file to user.MAN, and deny them write access to this file.

    1. - On the Windows 9x / Me machine, go to Control Panel -> Passwords and - select the User Profiles tab. Select the required level of - roaming preferences. Press OK, but do _not_ allow the computer - to reboot. -

    2. - On the Windows 9x / Me machine, go to Control Panel -> Network -> - Client for Microsoft Networks -> Preferences. Select Log on to - NT Domain. Then, ensure that the Primary Logon is Client for - Microsoft Networks. Press OK, and this time allow the computer - to reboot. -

    -Under Windows 9x / Me Profiles are downloaded from the Primary Logon. -If you have the Primary Logon as 'Client for Novell Networks', then -the profiles and logon script will be downloaded from your Novell -Server. If you have the Primary Logon as 'Windows Logon', then the -profiles will be loaded from the local machine - a bit against the -concept of roaming profiles, it would seem! -

    -You will now find that the Microsoft Networks Login box contains -[user, password, domain] instead of just [user, password]. Type in -the samba server's domain name (or any other domain known to exist, -but bear in mind that the user will be authenticated against this -domain and profiles downloaded from it, if that domain logon server -supports it), user name and user's password. -

    -Once the user has been successfully validated, the Windows 9x / Me machine -will inform you that The user has not logged on before and asks you -Do you wish to save the user's preferences?. Select yes. -

    -Once the Windows 9x / Me client comes up with the desktop, you should be able -to examine the contents of the directory specified in the logon path -on the samba server and verify that the Desktop, Start Menu, -Programs and Nethood folders have been created. -

    -These folders will be cached locally on the client, and updated when -the user logs off (if you haven't made them read-only by then). -You will find that if the user creates further folders or short-cuts, -that the client will merge the profile contents downloaded with the -contents of the profile directory already on the local client, taking -the newest folders and short-cuts from each set. -

    -If you have made the folders / files read-only on the samba server, -then you will get errors from the Windows 9x / Me machine on logon and logout, as -it attempts to merge the local and the remote profile. Basically, if -you have any errors reported by the Windows 9x / Me machine, check the UNIX file -permissions and ownership rights on the profile directory contents, -on the samba server. -

    -If you have problems creating user profiles, you can reset the user's -local desktop cache, as shown below. When this user then next logs in, -they will be told that they are logging in "for the first time". -

    Warning

    - Before deleting the contents of the - directory listed in the ProfilePath (this is likely to be - c:\windows\profiles\username), ask them if they - have any important files stored on their desktop or in their start menu. - Delete the contents of the directory ProfilePath (making a backup if any - of the files are needed). -

    - This will have the effect of removing the local (read-only hidden - system file) user.DAT in their profile directory, as well as the - local "desktop", "nethood", "start menu" and "programs" folders. -

    1. - instead of logging in under the [user, password, domain] dialog, - press escape. -

    2. - run the regedit.exe program, and look in: -

      - HKEY_LOCAL_MACHINE\Windows\CurrentVersion\ProfileList -

      - you will find an entry, for each user, of ProfilePath. Note the - contents of this key (likely to be c:\windows\profiles\username), - then delete the key ProfilePath for the required user. -

      [Exit the registry editor].

    3. - search for the user's .PWL password-caching file in the c:\windows - directory, and delete it. -

    4. - log off the windows 9x / Me client. -

    5. - check the contents of the profile path (see logon path described - above), and delete the user.DAT or user.MAN file for the user, - making a backup if required. -

    -If all else fails, increase samba's debug log levels to between 3 and 10, -and / or run a packet trace program such as ethereal or netmon.exe, and -look for error messages. -

    -If you have access to an Windows NT4/200x server, then first set up roaming profiles -and / or netlogons on the Windows NT4/200x server. Make a packet trace, or examine -the example packet traces provided with Windows NT4/200x server, and see what the -differences are with the equivalent samba trace. -

    Windows NT4 Workstation

    -When a user first logs in to a Windows NT Workstation, the profile -NTuser.DAT is created. The profile location can be now specified -through the logon path parameter. -

    -There is a parameter that is now available for use with NT Profiles: -logon drive. This should be set to H: or any other drive, and -should be used in conjunction with the new logon home parameter. -

    -The entry for the NT4 profile is a _directory_ not a file. The NT -help on profiles mentions that a directory is also created with a .PDS -extension. The user, while logging in, must have write permission to -create the full profile path (and the folder with the .PDS extension -for those situations where it might be created.) -

    -In the profile directory, Windows NT4 creates more folders than Windows 9x / Me. -It creates Application Data and others, as well as Desktop, Nethood, -Start Menu and Programs. The profile itself is stored in a file -NTuser.DAT. Nothing appears to be stored in the .PDS directory, and -its purpose is currently unknown. -

    -You can use the System Control Panel to copy a local profile onto -a samba server (see NT Help on profiles: it is also capable of firing -up the correct location in the System Control Panel for you). The -NT Help file also mentions that renaming NTuser.DAT to NTuser.MAN -turns a profile into a mandatory one. -

    -The case of the profile is significant. The file must be called -NTuser.DAT or, for a mandatory profile, NTuser.MAN. -

    Windows 2000/XP Professional

    -You must first convert the profile from a local profile to a domain -profile on the MS Windows workstation as follows: -

    1. - Log on as the LOCAL workstation administrator. + On the Windows 9x/Me machine, go to Control Panel -> + Passwords and select the User Profiles tab. + Select the required level of roaming preferences. Press OK, but do not + allow the computer to reboot.

    2. - Right click on the My Computer Icon, select Properties + On the Windows 9x/Me machine, go to Control Panel -> + Network -> Client for Microsoft Networks + -> Preferences. Select Log on to NT Domain. Then, + ensure that the Primary Logon is Client for Microsoft Networks. Press + OK, and this time allow the computer to reboot. +

    Under Windows 9x/ME, profiles are downloaded from the Primary Logon. If you have the Primary Logon +as “Client for Novell Networks”, then the profiles and logon script will be downloaded from +your Novell Server. If you have the Primary Logon as “Windows Logon”, then the profiles will +be loaded from the local machine a bit against the concept of roaming profiles, it would seem!

    +You will now find that the Microsoft Networks Login box contains [user, password, domain] instead +of just [user, password]. Type in the Samba server's domain name (or any other domain known to exist, +but bear in mind that the user will be authenticated against this domain and profiles downloaded from it, +if that domain logon server supports it), user name and user's password. +

    Once the user has been successfully validated, the Windows 9x/Me machine will inform you that +The user has not logged on before and asks you Do you +wish to save the user's preferences? Select Yes.

    Once the Windows 9x/Me client comes up with the desktop, you should be able to examine the +contents of the directory specified in the logon path on +the Samba server and verify that the Desktop, Start Menu, +Programs and Nethood folders have been created.

    These folders will be cached locally on the client, and updated when the user logs off (if +you haven't made them read-only by then). You will find that if the user creates further folders or +shortcut, that the client will merge the profile contents downloaded with the contents of the profile +directory already on the local client, taking the newest folders and shortcut from each set.

    If you have made the folders/files read-only on the Samba server, then you will get errors from +the Windows 9x/Me machine on logon and logout as it attempts to merge the local and remote profile. +Basically, if you have any errors reported by the Windows 9x/Me machine, check the UNIX file permissions +and ownership rights on the profile directory contents, on the Samba server.

    If you have problems creating user profiles, you can reset the user's local desktop cache, as +shown below. When this user next logs in, the user will be told that he/she is logging in “for + the first time”. + + +

    1. + Instead of logging in under the [user, password, domain] dialog, press escape.

    2. - Click on the User Profiles tab + Run the regedit.exe program, and look in: +

      + HKEY_LOCAL_MACHINE\Windows\CurrentVersion\ProfileList +

      + You will find an entry for each user of ProfilePath. Note the contents of this key + (likely to be c:\windows\profiles\username), then delete the key + ProfilePath for the required user.

    3. - Select the profile you wish to convert (click on it once) + Exit the registry editor.

    4. - Click on the button Copy To + Search for the user's .PWL password-caching file in the c:\windows directory, and delete it.

    5. - In the Permitted to use box, click on the Change button. + Log off the Windows 9x/Me client.

    6. - Click on the 'Look in" area that lists the machine name, when you click - here it will open up a selection box. Click on the domain to which the - profile must be accessible. -

      Note

      You will need to log on if a logon box opens up. Eg: In the connect as: DOMAIN\root, password: mypassword.

    7. - To make the profile capable of being used by anyone select 'Everyone' -

    8. - Click OK. The Selection box will close. -

    9. - Now click on the Ok button to create the profile in the path you - nominated. -

    -Done. You now have a profile that can be edited using the samba -profiles tool. -

    Note

    -Under NT/2K the use of mandatory profiles forces the use of MS Exchange -storage of mail data. That keeps desktop profiles usable. -

    Procedure 24.2. Windows XP Service Pack 1

    1. -This is a security check new to Windows XP (or maybe only -Windows XP service pack 1). It can be disabled via a group policy in -Active Directory. The policy is:

      Computer Configuration\Administrative Templates\System\User -Profiles\Do not check for user ownership of Roaming Profile Folders

      ...and it should be set to Enabled. -Does the new version of samba have an Active Directory analogue? If so, -then you may be able to set the policy through this. -

      -If you cannot set group policies in samba, then you may be able to set -the policy locally on each machine. If you want to try this, then do -the following (N.B. I don't know for sure that this will work in the -same way as a domain group policy): -

    2. -On the XP workstation log in with an Administrator account. -

    3. Click: Start, Run

    4. Type: mmc

    5. Click: OK

    6. A Microsoft Management Console should appear.

    7. Click: File, Add/Remove Snap-in..., Add

    8. Double-Click: Group Policy

    9. Click: Finish, Close

    10. Click: OK

    11. In the "Console Root" window:

    12. Expand: Local Computer Policy, Computer Configuration, - Administrative Templates, System, User Profiles

    13. Double-Click: Do not check for user ownership of Roaming Profile Folders

    14. Select: Enabled

    15. Click: OK

    16. Close the whole console. You do not need to save the settings (this - refers to the console settings rather than the policies you have - changed).

    17. Reboot

    Sharing Profiles between W9x/Me and NT4/200x/XP workstations

    -Sharing of desktop profiles between Windows versions is NOT recommended. -Desktop profiles are an evolving phenomenon and profiles for later versions -of MS Windows clients add features that may interfere with earlier versions -of MS Windows clients. Probably the more salient reason to NOT mix profiles -is that when logging off an earlier version of MS Windows the older format -of profile contents may overwrite information that belongs to the newer -version resulting in loss of profile information content when that user logs -on again with the newer version of MS Windows. -

    -If you then want to share the same Start Menu / Desktop with W9x/Me, you will -need to specify a common location for the profiles. The smb.conf parameters -that need to be common are logon path and -logon home. -

    -If you have this set up correctly, you will find separate user.DAT and -NTuser.DAT files in the same profile directory. -

    Profile Migration from Windows NT4/200x Server to Samba

    -There is nothing to stop you specifying any path that you like for the -location of users' profiles. Therefore, you could specify that the -profile be stored on a samba server, or any other SMB server, as long as -that SMB server supports encrypted passwords. -

    Windows NT4 Profile Management Tools

    -Unfortunately, the Resource Kit information is specific to the version of MS Windows -NT4/200x. The correct resource kit is required for each platform. -

    -Here is a quick guide: -

    1. -On your NT4 Domain Controller, right click on My Computer, then -select the tab labelled User Profiles. -

    2. -Select a user profile you want to migrate and click on it. -

      Note

      I am using the term "migrate" loosely. You can copy a profile to -create a group profile. You can give the user 'Everyone' rights to the -profile you copy this to. That is what you need to do, since your samba -domain is not a member of a trust relationship with your NT4 PDC.

    3. Click the Copy To button.

    4. In the box labelled Copy Profile to add your new path, eg: - c:\temp\foobar

    5. Click on the button Change in the Permitted to use box.

    6. Click on the group 'Everyone' and then click OK. This closes the - 'choose user' box.

    7. Now click OK.

    -Follow the above for every profile you need to migrate. -

    Side bar Notes

    -You should obtain the SID of your NT4 domain. You can use smbpasswd to do -this. Read the man page.

    moveuser.exe

    -The W2K professional resource kit has moveuser.exe. moveuser.exe changes -the security of a profile from one user to another. This allows the account -domain to change, and/or the user name to change. -

    Get SID

    -You can identify the SID by using GetSID.exe from the Windows NT Server 4.0 -Resource Kit. -

    -Windows NT 4.0 stores the local profile information in the registry under -the following key: -HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList -

    -Under the ProfileList key, there will be subkeys named with the SIDs of the -users who have logged on to this computer. (To find the profile information -for the user whose locally cached profile you want to move, find the SID for -the user with the GetSID.exe utility.) Inside of the appropriate user's -subkey, you will see a string value named ProfileImagePath. -

    Mandatory profiles

    -A Mandatory Profile is a profile that the user does NOT have the ability to overwrite. -During the user's session it may be possible to change the desktop environment, but -as the user logs out all changes made will be lost. If it is desired to NOT allow the -user any ability to change the desktop environment then this must be done through -policy settings. See previous chapter. -

    Note

    -Under NO circumstances should the profile directory (or it's contents) be made read-only -as this may render the profile un-usable. + Check the contents of the profile path (see logon path + described above) and delete the user.DAT or user.MAN + file for the user, making a backup if required. +

    Warning

    +Before deleting the contents of the directory listed in the ProfilePath +(this is likely to be c:\windows\profiles\username), ask the owner if they have +any important files stored on their desktop or in their start menu. Delete the contents of the +directory ProfilePath (making a backup if any of the files are needed). +

    +This will have the effect of removing the local (read-only hidden system file) user.DAT +in their profile directory, as well as the local “desktop,” “nethood,” +“start menu,” and “programs” folders.

    -For MS Windows NT4/200x/XP the above method can be used to create mandatory profiles -also. To convert a group profile into a mandatory profile simply locate the NTUser.DAT -file in the copied profile and rename it to NTUser.MAN. -

    -For MS Windows 9x / Me it is the User.DAT file that must be renamed to User.MAN to -affect a mandatory profile. -

    Creating/Managing Group Profiles

    -Most organisations are arranged into departments. There is a nice benefit in -this fact since usually most users in a department will require the same desktop -applications and the same desktop layout. MS Windows NT4/200x/XP will allow the -use of Group Profiles. A Group Profile is a profile that is created firstly using -a template (example) user. Then using the profile migration tool (see above) the -profile is assigned access rights for the user group that needs to be given access -to the group profile. -

    -The next step is rather important. Please note: Instead of assigning a group profile -to users (ie: Using User Manager) on a "per user" basis, the group itself is assigned -the now modified profile. +If all else fails, increase Samba's debug log levels to between 3 and 10, and/or run a packet +sniffer program such as ethereal or netmon.exe, and look for error messages. +

    If you have access to an Windows NT4/200x server, then first set up roaming profiles and/or +netlogons on the Windows NT4/200x server. Make a packet trace, or examine the example packet traces +provided with Windows NT4/200x server, and see what the differences are with the equivalent Samba trace. +

    Windows NT4 Workstation

    When a user first logs in to a Windows NT Workstation, the profile NTuser.DAT is created. The profile +location can be now specified through the logon path parameter. +

    There is a parameter that is now available for use with NT Profiles: logon drive. +This should be set to H: or any other drive, and should be used in conjunction with +the new logon home parameter.

    The entry for the NT4 profile is a directory not a file. The NT help on Profiles mentions that a +directory is also created with a .PDS extension. The user, while logging in, must have write permission +to create the full profile path (and the folder with the .PDS extension for those situations where it +might be created.)

    In the profile directory, Windows NT4 creates more folders than Windows 9x/Me. It creates +Application Data and others, as well as Desktop, +Nethood, Start Menu, and Programs. +The profile itself is stored in a file NTuser.DAT. Nothing appears to be stored +in the .PDS directory, and its purpose is currently unknown.

    You can use the System Control Panel to copy a local profile onto +a Samba server (see NT Help on Profiles; it is also capable of firing up the correct location in the +System Control Panel for you). The NT Help file also mentions that renaming +NTuser.DAT to NTuser.MAN turns a profile into a mandatory one. +

    The case of the profile is significant. The file must be called NTuser.DAT +or, for a mandatory profile, NTuser.MAN.

    Windows 2000/XP Professional

    You must first convert the profile from a local profile to a domain profile on the MS Windows +workstation as follows:

    1. Log on as the local workstation administrator.

    2. Right-click on the My Computer Icon, select + Properties.

    3. Click on the User Profiles tab.

    4. Select the profile you wish to convert (click it once).

    5. Click on the Copy To button.

    6. In the Permitted to use box, click on the + Change button.

    7. Click on the Look in area that lists the machine name. When you click here, it will + open up a selection box. Click on the domain to which the profile must be accessible.

      Note

      You will need to log on if a logon box opens up. + For example, connect as DOMAIN\root, password: + mypassword.

    8. To make the profile capable of being used by anyone, select “Everyone”.

    9. Click on OK and the Selection box will close.

    10. Now click on OK to create the profile in the path + you nominated.

    Done. You now have a profile that can be edited using the Samba profiles tool.

    Note

    - Be careful with group profiles, if the user who is a member of a group also - has a personal profile, then the result will be a fusion (merge) of the two. -

    Default Profile for Windows Users

    -MS Windows 9x / Me and NT4/200x/XP will use a default profile for any user for whom -a profile does not already exist. Armed with a knowledge of where the default profile -is located on the Windows workstation, and knowing which registry keys affect the path -from which the default profile is created, it is possible to modify the default profile -to one that has been optimised for the site. This has significant administrative -advantages. -

    MS Windows 9x/Me

    -To enable default per use profiles in Windows 9x / Me you can either use the Windows 98 System -Policy Editor or change the registry directly. -

    -To enable default per user profiles in Windows 9x / Me, launch the System Policy Editor, then -select File -> Open Registry, then click on the -Local Computer icon, click on Windows 98 System, -select User Profiles, click on the enable box. Do not forget to save the registry changes. -

    -To modify the registry directly, launch the Registry Editor (regedit.exe), select the hive -HKEY_LOCAL_MACHINE\Network\Logon. Now add a DWORD type key with the name -"User Profiles", to enable user profiles set the value to 1, to disable user profiles set it to 0. -

    How User Profiles Are Handled in Windows 9x / Me?

    -When a user logs on to a Windows 9x / Me machine, the local profile path, +Under Windows NT/200x, the use of mandatory profiles forces the use of MS Exchange storage of mail +data and keeps it out of the desktop profile. That keeps desktop profiles from becoming unusable. +

    Windows XP Service Pack 1

    + There is a security check new to Windows XP (or maybe only Windows XP service pack 1). + It can be disabled via a group policy in the Active Directory. The policy is called: +

    + Computer Configuration\Administrative Templates\System\User Profiles\Do not check for + user ownership of Roaming Profile Foldersi +

    + This should be set to Enabled. +

    + Does the new version of Samba have an Active Directory analogue? If so, then you may be able to set the policy through this. +

    If you cannot set group policies in Samba, then you may be able to set the policy locally on + each machine. If you want to try this, then do the following (N.B. I do not know for sure that this + will work in the same way as a domain group policy): +

    1. On the XP workstation, log in with an Administrative account.

    2. Click on Start -> Run.

    3. Type mmc.

    4. Click on OK.

    5. A Microsoft Management Console should appear.

    6. Click on File -> Add/Remove Snap-in -> Add.

    7. Double-click on Group Policy.

    8. Click on Finish -> Close.

    9. Click on OK.

    10. In the “Console Root” window expand Local Computer Policy -> + Computer Configuration -> Administrative Templates -> System -> User Profiles.

    11. Double-click on Do not check for user ownership of Roaming Profile Folders.

    12. Select Enabled.

    13. Click on OK.

    14. Close the whole console. You do not need to save the settings (this refers to the + console settings rather than the policies you have changed).

    15. Reboot.

    Sharing Profiles between W9x/Me and NT4/200x/XP Workstations

    Sharing of desktop profiles between Windows versions is not recommended. Desktop profiles are an +evolving phenomenon and profiles for later versions of MS Windows clients add features that may interfere +with earlier versions of MS Windows clients. Probably the more salient reason to not mix profiles is +that when logging off an earlier version of MS Windows, the older format of profile contents may overwrite +information that belongs to the newer version resulting in loss of profile information content when that +user logs on again with the newer version of MS Windows.

    If you then want to share the same Start Menu/Desktop with W9x/Me, you will need to specify a common +location for the profiles. The smb.conf parameters that need to be common are logon path and logon home.

    If you have this set up correctly, you will find separate user.DAT and +NTuser.DAT files in the same profile directory.

    Profile Migration from Windows NT4/200x Server to Samba

    There is nothing to stop you from specifying any path that you like for the location of users' profiles. +Therefore, you could specify that the profile be stored on a Samba server, or any other SMB server, +as long as that SMB server supports encrypted passwords.

    Windows NT4 Profile Management Tools

    Unfortunately, the Resource Kit information is specific to the version of MS Windows NT4/200x. The +correct resource kit is required for each platform.

    Here is a quick guide:

    1. On your NT4 Domain Controller, right click on My Computer, then select the + tab labeled User Profiles.

    2. Select a user profile you want to migrate and click on it.

      Note

      I am using the term “migrate” loosely. You can copy a profile to create a group + profile. You can give the user Everyone rights to the profile you copy this to. That + is what you need to do, since your Samba domain is not a member of a trust relationship with your NT4 + PDC.

    3. Click on the Copy To button.

    4. In the box labeled Copy Profile to add your new path, e.g., + c:\temp\foobar

    5. Click on Change in the Permitted to use box.

    6. Click on the group “Everyone”, click on OK. This + closes the “choose user” box.

    7. Now click on OK.

    Follow the above for every profile you need to migrate.

    Side Bar Notes

    + +You should obtain the SID of your NT4 domain. You can use smbpasswd to do this. Read the man +page.

    moveuser.exe

    The Windows 200x professional resource kit has moveuser.exe. moveuser.exe changes the security of a profile +from one user to another. This allows the account domain to change, and/or the user name to change.

    +This command is like the Samba profiles tool. +

    Get SID

    + +You can identify the SID by using GetSID.exe from the Windows NT Server 4.0 Resource Kit.

    Windows NT 4.0 stores the local profile information in the registry under the following key: +HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

    Under the ProfileList key, there will be subkeys named with the SIDs of the users who have logged +on to this computer. (To find the profile information for the user whose locally cached profile you want +to move, find the SID for the user with the GetSID.exe utility.) Inside the appropriate user's subkey, +you will see a string value named ProfileImagePath.

    Mandatory Profiles

    + +A Mandatory Profile is a profile that the user does not have the ability to overwrite. During the +user's session, it may be possible to change the desktop environment, however, as the user logs out all changes +made will be lost. If it is desired to not allow the user any ability to change the desktop environment, +then this must be done through policy settings. See the previous chapter.

    Note

    +Under NO circumstances should the profile directory (or its contents) be made read-only +as this may render the profile un-usable. Where it is essential to make a profile read-only +within the UNIX file system, this can be done but then you absolutely must use the fake-permissions +VFS module to instruct MS Windows NT/200x/XP clients that the Profile has write permission for the user. See . +

    For MS Windows NT4/200x/XP, the above method can also be used to create mandatory profiles. To +convert a group profile into a mandatory profile, simply locate the NTUser.DAT file in the copied profile +and rename it to NTUser.MAN.

    For MS Windows 9x/ME, it is the User.DAT file that must be renamed to +User.MAN to effect a mandatory profile.

    Creating and Managing Group Profiles

    + +Most organizations are arranged into departments. There is a nice benefit in this fact since usually +most users in a department require the same desktop applications and the same desktop layout. MS +Windows NT4/200x/XP will allow the use of Group Profiles. A Group Profile is a profile that is created +first using a template (example) user. Then using the profile migration tool (see above), the profile is +assigned access rights for the user group that needs to be given access to the group profile.

    The next step is rather important. Instead of assigning a group profile to users (Using User Manager) +on a “per user” basis, the group itself is assigned the now modified profile.

    Note

    Be careful with Group Profiles. If the user who is a member of a group also has a personal +profile, then the result will be a fusion (merge) of the two.

    Default Profile for Windows Users

    + +MS Windows 9x/Me and NT4/200x/XP will use a default profile for any user for whom a profile +does not already exist. Armed with a knowledge of where the default profile is located on the Windows +workstation, and knowing which registry keys effect the path from which the default profile is created, +it is possible to modify the default profile to one that has been optimized for the site. This has +significant administrative advantages.

    MS Windows 9x/Me

    To enable default per use profiles in Windows 9x/ME, you can either use the Windows +98 System Policy Editor or change the registry directly.

    To enable default per user profiles in Windows 9x/ME, launch the System Policy +Editor, then select File -> Open Registry, +next click on the Local Computer icon, click on Windows 98 System, +select User Profiles, and click on the enable box. Remember to save the registry +changes.

    To modify the registry directly, launch the Registry Editor +(regedit.exe) and select the hive HKEY_LOCAL_MACHINE\Network\Logon. Now +add a DWORD type key with the name “User Profiles,” to +enable user profiles to set the value +to 1; to disable user profiles set it to 0.

    User Profile Handling with Windows 9x/Me

    When a user logs on to a Windows 9x/Me machine, the local profile path, HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\ProfileList, is checked -for an existing entry for that user: -

    -If the user has an entry in this registry location, Windows 9x / Me checks for a locally cached -version of the user profile. Windows 9x / Me also checks the user's home directory (or other -specified directory if the location has been modified) on the server for the User Profile. -If a profile exists in both locations, the newer of the two is used. If the User Profile exists -on the server, but does not exist on the local machine, the profile on the server is downloaded -and used. If the User Profile only exists on the local machine, that copy is used. -

    -If a User Profile is not found in either location, the Default User Profile from the Windows 9x / Me -machine is used and is copied to a newly created folder for the logged on user. At log off, any -changes that the user made are written to the user's local profile. If the user has a roaming -profile, the changes are written to the user's profile on the server. -

    MS Windows NT4 Workstation

    -On MS Windows NT4 the default user profile is obtained from the location +for an existing entry for that user.

    If the user has an entry in this registry location, Windows 9x/Me checks for a locally cached +version of the user profile. Windows 9x/Me also checks the user's home directory (or other specified +directory if the location has been modified) on the server for the User Profile. If a profile exists +in both locations, the newer of the two is used. If the User Profile exists on the server, but does not +exist on the local machine, the profile on the server is downloaded and used. If the User Profile only +exists on the local machine, that copy is used.

    If a User Profile is not found in either location, the Default User Profile from the Windows +9x/Me machine is used and copied to a newly created folder for the logged on user. At log off, any +changes that the user made are written to the user's local profile. If the user has a roaming profile, +the changes are written to the user's profile on the server.

    MS Windows NT4 Workstation

    On MS Windows NT4, the default user profile is obtained from the location %SystemRoot%\Profiles which in a default installation will translate to -C:\WinNT\Profiles. Under this directory on a clean install there will be -three (3) directories: Administrator, All Users, Default User. -

    -The All Users directory contains menu settings that are common across all -system users. The Default User directory contains menu entries that are -customisable per user depending on the profile settings chosen/created. -

    -When a new user first logs onto an MS Windows NT4 machine a new profile is created from: -

    • All Users settings

    • Default User settings (contains the default NTUser.DAT file)

    -When a user logs onto an MS Windows NT4 machine that is a member of a Microsoft security domain -the following steps are followed in respect of profile handling: -

    1. - The users' account information which is obtained during the logon process contains - the location of the users' desktop profile. The profile path may be local to the - machine or it may be located on a network share. If there exists a profile at the location - of the path from the user account, then this profile is copied to the location - %SystemRoot%\Profiles\%USERNAME%. This profile then inherits the - settings in the All Users profile in the %SystemRoot%\Profiles - location. -

    2. - If the user account has a profile path, but at it's location a profile does not exist, - then a new profile is created in the %SystemRoot%\Profiles\%USERNAME% - directory from reading the Default User profile. -

    3. - If the NETLOGON share on the authenticating server (logon server) contains a policy file - (NTConfig.POL) then it's contents are applied to the NTUser.DAT - which is applied to the HKEY_CURRENT_USER part of the registry. -

    4. - When the user logs out, if the profile is set to be a roaming profile it will be written - out to the location of the profile. The NTuser.DAT file is then - re-created from the contents of the HKEY_CURRENT_USER contents. - Thus, should there not exist in the NETLOGON share an NTConfig.POL at the - next logon, the effect of the previous NTConfig.POL will still be held - in the profile. The effect of this is known as tatooing. -

    -MS Windows NT4 profiles may be Local or Roaming. A Local profile -will stored in the %SystemRoot%\Profiles\%USERNAME% location. A roaming profile will -also remain stored in the same way, unless the following registry key is created: -

    -

    -HKEY_LOCAL_MACHINE\SYSTEM\Software\Microsoft\Windows NT\CurrentVersion\
    -winlogon\"DeleteRoamingCache"=dword:00000001
    -

    +C:\Windows NT\Profiles. Under this directory on a clean install there will be three +(3) directories: Administrator, All +Users, and Default +User.

    The All Users directory contains menu settings that are common across all +system users. The Default User directory contains menu entries that are customizable +per user depending on the profile settings chosen/created.

    When a new user first logs onto an MS Windows NT4 machine, a new profile is created from:

    • All Users settings.

    • Default User settings (contains the default NTUser.DAT file).

    When a user logs onto an MS Windows NT4 machine that is a member of a Microsoft security domain, + the following steps are followed in respect of profile handling: -In which case, the local copy (in %SystemRoot%\Profiles\%USERNAME%) will be -deleted on logout. -

    -Under MS Windows NT4 default locations for common resources (like My Documents -may be redirected to a network share by modifying the following registry keys. These changes may be affected -via use of the System Policy Editor (to do so may require that you create your owns template extension -for the policy editor to allow this to be done through the GUI. Another way to do this is by way of first -creating a default user profile, then while logged in as that user, run regedt32 to edit the key settings. -

    -The Registry Hive key that affects the behaviour of folders that are part of the default user profile -are controlled by entries on Windows NT4 is: -

    -HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\ -

    -The above hive key contains a list of automatically managed folders. The default entries are: -

    -

    Table 24.1. User Shell Folder registry keys default values

    NameDefault Value
    AppData%USERPROFILE%\Application Data
    Desktop%USERPROFILE%\Desktop
    Favorites%USERPROFILE%\Favorites
    NetHood%USERPROFILE%\NetHood
    PrintHood%USERPROFILE%\PrintHood
    Programs%USERPROFILE%\Start Menu\Programs
    Recent%USERPROFILE%\Recent
    SendTo%USERPROFILE%\SendTo
    Start Menu %USERPROFILE%\Start Menu
    Startup%USERPROFILE%\Start Menu\Programs\Startup

    -

    -The registry key that contains the location of the default profile settings is: -

    -HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders -

    -The default entries are: + +

    1. The users' account information that is obtained during the logon process + contains the location of the users' desktop profile. The profile path may be local to + the machine or it may be located on a network share. If there exists a profile at the + location of the path from the user account, then this profile is copied to the location + %SystemRoot%\Profiles\%USERNAME%. This profile then inherits the settings + in the All Users profile in the %SystemRoot%\Profiles + location.

    2. If the user account has a profile path, but at its location a profile does not + exist, then a new profile is created in the %SystemRoot%\Profiles\%USERNAME% + directory from reading the Default User profile.

    3. If the NETLOGON share on the authenticating server (logon server) contains + a policy file (NTConfig.POL), then its contents are applied to the + NTUser.DAT which is applied to the HKEY_CURRENT_USER + part of the registry. +

    4. When the user logs out, if the profile is set to be a roaming profile it will be + written out to the location of the profile. The NTuser.DAT file is then + recreated from the contents of the HKEY_CURRENT_USER contents. Thus, + should there not exist in the NETLOGON share an NTConfig.POL at the next + logon, the effect of the previous NTConfig.POL will still be held in the + profile. The effect of this is known as tattooing. +

    MS Windows NT4 profiles may be local or roaming. A local +profile will stored in the %SystemRoot%\Profiles\%USERNAME% location. A roaming +profile will also remain stored in the same way, unless the following registry key is created as shown:

     HKEY_LOCAL_MACHINE\SYSTEM\Software\Microsoft\Windows NT\CurrentVersion\
    +winlogon\"DeleteRoamingCache"=dword:0000000
    + 

    +In this case, the local copy (in %SystemRoot%\Profiles\%USERNAME%) will be deleted +on logout.

    Under MS Windows NT4, default locations for common resources like My Documents +may be redirected to a network share by modifying the following registry keys. These changes may be +affected via use of the System Policy Editor. To do so may require that you create your own template +extension for the policy editor to allow this to be done through the GUI. Another way to do this is by +way of first creating a default user profile, then while logged in as that user, run regedt32 to edit +the key settings.

    +The Registry Hive key that affects the behavior of folders that are part of the default user +profile are controlled by entries on Windows NT4 is: +

    +HKEY_CURRENT_USER
    +	\Software
    +		\Microsoft
    +			\Windows
    +				\CurrentVersion
    +					\Explorer
    +						\User Shell Folders
    +

    + +

    The above hive key contains a list of automatically managed folders. The default entries are shown in .

    Table 24.1. User Shell Folder Registry Keys Default Values

    NameDefault Value
    AppData%USERPROFILE%\Application Data
    Desktop%USERPROFILE%\Desktop
    Favorites%USERPROFILE%\Favorites
    NetHood%USERPROFILE%\NetHood
    PrintHood%USERPROFILE%\PrintHood
    Programs%USERPROFILE%\Start Menu\Programs
    Recent%USERPROFILE%\Recent
    SendTo%USERPROFILE%\SendTo
    Start Menu %USERPROFILE%\Start Menu
    Startup%USERPROFILE%\Start Menu\Programs\Startup

    The registry key that contains the location of the default profile settings is:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\ +User Shell Folders

    The default entries are shown in .

    Table 24.2. Defaults of Profile Settings Registry Keys

    Common Desktop%SystemRoot%\Profiles\All Users\Desktop
    Common Programs%SystemRoot%\Profiles\All Users\Programs
    Common Start Menu%SystemRoot%\Profiles\All Users\Start Menu
    Common Startup%SystemRoot%\Profiles\All Users\Start Menu\Programs\Startup

    MS Windows 200x/XP

    Note

    + +MS Windows XP Home Edition does use default per user profiles, but cannot participate +in domain security, cannot log onto an NT/ADS-style domain, and thus can obtain the profile only +from itself. While there are benefits in doing this, the beauty of those MS Windows clients that +can participate in domain logon processes allows the administrator to create a global default +profile and enforce it through the use of Group Policy Objects (GPOs). +

    When a new user first logs onto an MS Windows 200x/XP machine, the default profile is obtained from +C:\Documents and Settings\Default User. The administrator can modify or change the +contents of this location and MS Windows 200x/XP will gladly use it. This is far from the optimum arrangement +since it will involve copying a new default profile to every MS Windows 200x/XP client workstation.

    When MS Windows 200x/XP participates in a domain security context, and if the default user profile is + not found, then the client will search for a default profile in the NETLOGON share of the authenticating + server. In MS Windows parlance,%LOGONSERVER%\NETLOGON\Default User, and if one +exists there it will copy this to the workstation to the C:\Documents and Settings\ +under the Windows login name of the user.

    Note

    This path translates, in Samba parlance, to the smb.conf +[NETLOGON] share. The directory should be created at the root +of this share and must be called Default Profile.

    If a default profile does not exist in this location, then MS Windows 200x/XP will use the local +default profile.

    On logging out, the users' desktop profile will be stored to the location specified in the registry +settings that pertain to the user. If no specific policies have been created or passed to the client +during the login process (as Samba does automatically), then the user's profile will be written to the +local machine only under the path C:\Documents and Settings\%USERNAME%.

    Those wishing to modify the default behavior can do so through these three methods:

    • Modify the registry keys on the local machine manually and place the new + default profile in the NETLOGON share root. This is not recommended as it is maintenance intensive. +

    • Create an NT4-style NTConfig.POL file that specified this behavior and locate + this file in the root of the NETLOGON share along with the new default profile.

    • Create a GPO that enforces this through Active Directory, and place the new + default profile in the NETLOGON share.

    The registry hive key that effects the behavior of folders that are part of the default user +profile are controlled by entries on Windows 200x/XP is:

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell +Folders\

    +The above hive key contains a list of automatically managed folders. The default entries are shown +in + +

    Table 24.3. Defaults of Default User Profile Paths Registry Keys

    NameDefault Value
    AppData%USERPROFILE%\Application Data
    Cache%USERPROFILE%\Local Settings\Temporary Internet Files
    Cookies%USERPROFILE%\Cookies
    Desktop%USERPROFILE%\Desktop
    Favorites%USERPROFILE%\Favorites
    History%USERPROFILE%\Local Settings\History
    Local AppData%USERPROFILE%\Local Settings\Application Data
    Local Settings%USERPROFILE%\Local Settings
    My Pictures%USERPROFILE%\My Documents\My Pictures
    NetHood%USERPROFILE%\NetHood
    Personal%USERPROFILE%\My Documents
    PrintHood%USERPROFILE%\PrintHood
    Programs%USERPROFILE%\Start Menu\Programs
    Recent%USERPROFILE%\Recent
    SendTo%USERPROFILE%\SendTo
    Start Menu%USERPROFILE%\Start Menu
    Startup%USERPROFILE%\Start Menu\Programs\Startup
    Templates%USERPROFILE%\Templates

    There is also an entry called “Default” that has no value set. The default entry is +of type REG_SZ, all the others are of type REG_EXPAND_SZ.

    It makes a huge difference to the speed of handling roaming user profiles if all the folders are +stored on a dedicated location on a network server. This means that it will not be necessary to write +the Outlook PST file over the network for every login and logout.

    To set this to a network location, you could use the following examples:

    %LOGONSERVER%\%USERNAME%\Default Folders

    This would store the folders in the user's home directory under a directory called Default +Folders. You could also use:

    \\SambaServer\FolderShare\%USERNAME%

    +in which case the default folders will be stored in the server named SambaServer +in the share called FolderShare under a directory that has the name of the +MS Windows user as seen by the Linux/UNIX file system.

    Please note that once you have created a default profile share, you MUST migrate a user's profile +(default or custom) to it.

    MS Windows 200x/XP profiles may be Local or Roaming. + A roaming profile will be cached locally unless the following registry key is created: -

    Table 24.2. Defaults of profile settings registry keys

    Common Desktop%SystemRoot%\Profiles\All Users\Desktop
    Common Programs%SystemRoot%\Profiles\All Users\Programs
    Common Start Menu%SystemRoot%\Profiles\All Users\Start Menu
    Common Startup%SystemRoot%\Profiles\All Users\Start Menu\Programs\Startup

    -

    MS Windows 200x/XP

    Note

    - MS Windows XP Home Edition does use default per user profiles, but can not participate - in domain security, can not log onto an NT/ADS style domain, and thus can obtain the profile - only from itself. While there are benefits in doing this the beauty of those MS Windows - clients that CAN participate in domain logon processes allows the administrator to create - a global default profile and to enforce it through the use of Group Policy Objects (GPOs). -

    -When a new user first logs onto MS Windows 200x/XP machine the default profile is obtained from -C:\Documents and Settings\Default User. The administrator can modify (or change -the contents of this location and MS Windows 200x/XP will gladly use it. This is far from the optimum -arrangement since it will involve copying a new default profile to every MS Windows 200x/XP client -workstation. -

    -When MS Windows 200x/XP participate in a domain security context, and if the default user -profile is not found, then the client will search for a default profile in the NETLOGON share -of the authenticating server. ie: In MS Windows parlance: -%LOGONSERVER%\NETLOGON\Default User and if one exits there it will copy this -to the workstation to the C:\Documents and Settings\ under the Windows -login name of the user. -

    Note

    - This path translates, in Samba parlance, to the smb.conf [NETLOGON] share. The directory - should be created at the root of this share and must be called Default Profile. -

    -If a default profile does not exist in this location then MS Windows 200x/XP will use the local -default profile. -

    -On logging out, the users' desktop profile will be stored to the location specified in the registry -settings that pertain to the user. If no specific policies have been created, or passed to the client -during the login process (as Samba does automatically), then the user's profile will be written to -the local machine only under the path C:\Documents and Settings\%USERNAME%. -

    -Those wishing to modify the default behaviour can do so through three methods: -

    • - Modify the registry keys on the local machine manually and place the new default profile in the - NETLOGON share root - NOT recommended as it is maintenance intensive. -

    • - Create an NT4 style NTConfig.POL file that specified this behaviour and locate this file - in the root of the NETLOGON share along with the new default profile. -

    • - Create a GPO that enforces this through Active Directory, and place the new default profile - in the NETLOGON share. -

    -The Registry Hive key that affects the behaviour of folders that are part of the default user profile -are controlled by entries on Windows 200x/XP is: -

    -HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\ -

    -The above hive key contains a list of automatically managed folders. The default entries are: -

    -

    Table 24.3. Defaults of default user profile paths registry keys

    NameDefault Value
    AppData%USERPROFILE%\Application Data
    Cache%USERPROFILE%\Local Settings\Temporary Internet Files
    Cookies%USERPROFILE%\Cookies
    Desktop%USERPROFILE%\Desktop
    Favorites%USERPROFILE%\Favorites
    History%USERPROFILE%\Local Settings\History
    Local AppData%USERPROFILE%\Local Settings\Application Data
    Local Settings%USERPROFILE%\Local Settings
    My Pictures%USERPROFILE%\My Documents\My Pictures
    NetHood%USERPROFILE%\NetHood
    Personal%USERPROFILE%\My Documents
    PrintHood%USERPROFILE%\PrintHood
    Programs%USERPROFILE%\Start Menu\Programs
    Recent%USERPROFILE%\Recent
    SendTo%USERPROFILE%\SendTo
    Start Menu%USERPROFILE%\Start Menu
    Startup%USERPROFILE%\Start Menu\Programs\Startup
    Templates%USERPROFILE%\Templates

    -

    -There is also an entry called "Default" that has no value set. The default entry is of type REG_SZ, all -the others are of type REG_EXPAND_SZ. -

    -It makes a huge difference to the speed of handling roaming user profiles if all the folders are -stored on a dedicated location on a network server. This means that it will NOT be necessary to -write the Outlook PST file over the network for every login and logout. -

    -To set this to a network location you could use the following examples: -

    %LOGONSERVER%\%USERNAME%\Default Folders

    -This would store the folders in the user's home directory under a directory called Default Folders -You could also use: -

    \\SambaServer\FolderShare\%USERNAME%

    - in which case the default folders will be stored in the server named SambaServer -in the share called FolderShare under a directory that has the name of the MS Windows -user as seen by the Linux/UNIX file system. -

    -Please note that once you have created a default profile share, you MUST migrate a user's profile -(default or custom) to it. -

    -MS Windows 200x/XP profiles may be Local or Roaming. -A roaming profile will be cached locally unless the following registry key is created: -

    -

    -HKEY_LOCAL_MACHINE\SYSTEM\Software\Microsoft\Windows NT\CurrentVersion\
    -	winlogon\"DeleteRoamingCache"=dword:00000001

    -In which case, the local cache copy will be deleted on logout. -

    Common Errors

    -The following are some typical errors/problems/questions that have been asked. -

    Setting up roaming profiles for just a few user's or group's?

    -With samba-2.2.x the choice you have is to enable or disable roaming -profiles support. It is a global only setting. The default is to have -roaming profiles and the default path will locate them in the user's home -directory. -

    -If disabled globally then no-one will have roaming profile ability. -If enabled and you want it to apply only to certain machines, then on -those machines on which roaming profile support is NOT wanted it is then -necessary to disable roaming profile handling in the registry of each such -machine. -

    -With samba-3 you can have a global profile -setting in smb.conf _AND_ you can over-ride this by per-user settings -using the Domain User Manager (as with MS Windows NT4/ Win 2Kx). -

    -In any case, you can configure only one profile per user. That profile can -be either: -

    • A profile unique to that user

    • A mandatory profile (one the user can not change)

    • A group profile (really should be mandatory ie:unchangable)

    Can NOT use Roaming Profiles

    -A user requested the following: -“ -I do not want Roaming profiles to be implemented. I want to give users a local profile alone. ... -Please help me I am totally lost with this error. For the past two days I tried everything, I googled -around but found no useful pointers. Please help me. -

    -The choices are: -

    Local profiles:

    - I know of no registry keys that will allow auto-deletion of LOCAL profiles on log out -

    Roaming profiles:

    - As a user logs onto the network a centrally stored profile is copied to the workstation - to form a local profile. This local profile will persist (remain on the workstation disk) - unless a registry key is changed that will cause this profile to be automatically deleted - on logout. -

    -The Roaming Profile choices are: -

    Personal Roaming profiles

    - These are typically stored in a profile share on a central (or conveniently located - local) server. -

    - Workstations 'cache' (store) a local copy of the profile. This cached copy is used when - the profile can not be downloaded at next logon. -

    Group profiles

    These are loaded from a central profile server

    Mandatory profiles

    - Mandatory profiles can be created for a user as well as for any group that a user - is a member of. Mandatory profiles can NOT be changed by ordinary users. Only the administrator - can change or reconfigure a mandatory profile. -

    -A WinNT4/2K/XP profile can vary in size from 130KB to off the scale. -Outlook PST files are most often part of the profile and can be many GB in -size. On average (in a well controlled environment) roaming profile size of -2MB is a good rule of thumb to use for planning purposes. In an -undisciplined environment I have seen up to 2GB profiles. Users tend to -complain when it take an hour to log onto a workstation but they harvest -the fruits of folly (and ignorance). -

    -The point of all the above is to show that roaming profiles and good -controls of how they can be changed as well as good discipline make up for -a problem free site. -

    -Microsoft's answer to the PST problem is to store all email in an MS -Exchange Server back-end. This removes the need for a PST file. -

    -LOCAL profiles mean: -

    • If each machine is used my many users then much local disk storage is needed for local profiles

    • Every workstation the user logs into has it's own profile, these can be very different from machine to machine

    -On the other hand, use of roaming profiles means: -

    • The network administrator can control the desktop environment of all users.

    • Use of mandatory profiles drasitcally reduces network management overheads.

    • In the long run users will be experience fewer problems.

    Changing the default profile

    -Question: -“ -When the client logs onto the domain controller it searches for a profile to download, -where do I put this default profile? -

    -Firstly, the samba server needs to be configured as a domain controller. -This can be done by setting in smb.conf: -

    security = user
    os level = 32 (or more)
    domain logons = Yes

    -There must be an [netlogon] share that is world readable. -It is a good idea to add a logon script to pre-set printer and -drive connections. There is also a facility for automatically -synchronizing the workstation time clock with that of the logon -server (another good thing to do). -

    Note

    -To invoke auto-deletion of roaming profile from the local -workstation cache (disk storage) use the Group Policy Editor -to create a file called NTConfig.POL with the appropriate entries. This -file needs to be located in the netlogon share root directory.

    -Windows clients need to be members of the domain. Workgroup machines do NOT use network logons so -they do not interoperate with domain profiles. -

    -For roaming profiles add to smb.conf: -

    -

    logon path = \\%N\profiles\%U
    # Default logon drive is Z:
    logon drive = H:
    # This requires a PROFILES share that is world writable.

    -

    + +

     HKEY_LOCAL_MACHINE\SYSTEM\Software\Microsoft\Windows NT\CurrentVersion\
    +	winlogon\"DeleteRoamingCache"=dword:00000001

    +In this case, the local cache copy will be deleted on logout. +

    Common Errors

    +The following are some typical errors, problems and questions that have been asked on the Samba mailing lists. +

    Configuring Roaming Profiles for a Few Users or Groups

    +With Samba-2.2.x, the choice you have is to enable or disable roaming profiles support. It is a +global only setting. The default is to have roaming profiles and the default path will locate them in +the user's home directory. +

    +If disabled globally, then no one will have roaming profile ability. If enabled and you want it +to apply only to certain machines, then on those machines on which roaming profile support is not wanted +it is then necessary to disable roaming profile handling in the registry of each such machine. +

    +With Samba-3, you can have a global profile setting in smb.conf and you can override this by +per-user settings using the Domain User Manager (as with MS Windows NT4/ Win 200xx).

    In any case, you can configure only one profile per user. That profile can be either:

    • A profile unique to that user.
    • A mandatory profile (one the user cannot change).
    • A group profile (really should be mandatory, that is unchangable).

    Cannot Use Roaming Profiles

    A user requested the following: “ I do not want Roaming profiles to be implemented. I want +to give users a local profile alone. Please help me, I am totally lost with this error. For the past +two days I tried everything, I googled around but found no useful pointers. Please help me.

    The choices are:

    Local profiles

    I know of no registry keys that will allow + auto-deletion of LOCAL profiles on log out.

    Roaming profiles

    As a user logs onto the network, a centrally + stored profile is copied to the workstation to form a local profile. This local profile + will persist (remain on the workstation disk) unless a registry key is changed that will + cause this profile to be automatically deleted on logout.

    The roaming profile choices are:

    Personal roaming profiles

    These are typically stored in + a profile share on a central (or conveniently located local) server.

    Workstations cache (store) a local copy of the profile. This cached + copy is used when the profile cannot be downloaded at next logon.

    Group profiles

    These are loaded from a central profile + server.

    Mandatory profiles

    Mandatory profiles can be created for + a user as well as for any group that a user is a member of. Mandatory profiles cannot be + changed by ordinary users. Only the administrator can change or reconfigure a mandatory + profile.

    A Windows NT4/200x/XP profile can vary in size from 130KB to very large. Outlook PST files are +most often part of the profile and can be many GB in size. On average (in a well controlled environment), +roaming profile size of 2MB is a good rule of thumb to use for planning purposes. In an undisciplined +environment, I have seen up to 2GB profiles. Users tend to complain when it takes an hour to log onto a +workstation but they harvest the fruits of folly (and ignorance).

    The point of all the above is to show that roaming profiles and good controls of how they can be +changed as well as good discipline make up for a problem-free site.

    Microsoft's answer to the PST problem is to store all email in an MS Exchange Server backend. This +removes the need for a PST file.

    Local profiles mean:

    • If each machine is used by many users, then much local disk storage is needed + for local profiles.

    • Every workstation the user logs into has + its own profile; these can be very different from machine to machine.

    On the other hand, use of roaming profiles means:

    • The network administrator can control the desktop environment of all users.

    • Use of mandatory profiles drastically reduces network management overheads.

    • In the long run, users will experience fewer problems.

    Changing the Default Profile

    When the client logs onto the Domain Controller, it searches +for a profile to download. Where do I put this default profile?

    + +First, the Samba server needs to be configured as a Domain Controller. This can be done by +setting in smb.conf:

    security = user
    os level = 32 (or more)
    domain logons = Yes

    There must be a [netlogon] share that is world readable. It is +a good idea to add a logon script to pre-set printer and drive connections. There is also a facility +for automatically synchronizing the workstation time clock with that of the logon server (another good +thing to do).

    Note

    To invoke auto-deletion of roaming profile from the local workstation cache (disk storage), use +the Group Policy Editor to create a file called NTConfig.POL +with the appropriate entries. This file needs to be located in the netlogon +share root directory.

    Windows clients need to be members of the domain. Workgroup machines do not use network logons +so they do not interoperate with domain profiles.

    For roaming profiles, add to smb.conf:

    logon path = \\%N\profiles\%U
    # Default logon drive is Z:
    logon drive = H:
    # This requires a PROFILES share that is world writable.
    diff --git a/docs/htmldocs/SWAT.html b/docs/htmldocs/SWAT.html index 30df1ed778..d4c8b78dcf 100644 --- a/docs/htmldocs/SWAT.html +++ b/docs/htmldocs/SWAT.html @@ -1,34 +1,162 @@ -Chapter 32. SWAT - The Samba Web Administration Tool

    Chapter 32. SWAT - The Samba Web Administration Tool

    John H. Terpstra

    Samba Team

    April 21, 2003

    -There are many and varied opinions regarding the usefulness or otherwise of SWAT. -No matter how hard one tries to produce the perfect configuration tool it remains -an object of personal taste. SWAT is a tool that will allow web based configuration -of samba. It has a wizard that may help to get samba configured quickly, it has context -sensitive help on each smb.conf parameter, it provides for monitoring of current state -of connection information, and it allows network wide MS Windows network password +Chapter 32. SWAT The Samba Web Administration Tool

    Chapter 32. SWAT The Samba Web Administration Tool

    John H. Terpstra

    Samba Team

    April 21, 2003

    +There are many and varied opinions regarding the usefulness of SWAT. +No matter how hard one tries to produce the perfect configuration tool, it remains +an object of personal taste. SWAT is a tool that will allow Web-based configuration +of Samba. It has a wizard that may help to get Samba configured +quickly, it has context-sensitive help on each smb.conf parameter, it provides for monitoring of current state +of connection information, and it allows network-wide MS Windows network password management. -

    Features and Benefits

    +

    Features and Benefits

    +SWAT is a facility that is part of the Samba suite. The main executable is called +swat and is invoked by the inter-networking super daemon. +See for details. +

    +SWAT uses integral samba components to locate parameters supported by the particular +version of Samba. Unlike tools and utilities that are external to Samba, SWAT is always +up to date as known Samba parameters change. SWAT provides context-sensitive help for each +configuration parameter, directly from man page entries. +

    There are network administrators who believe that it is a good idea to write systems -documentation inside configuration files, for them SWAT will aways be a nasty tool. SWAT +documentation inside configuration files, and for them SWAT will aways be a nasty tool. SWAT does not store the configuration file in any intermediate form, rather, it stores only the -parameter settings, so when SWAT writes the smb.conf file to disk it will write only -those parameters that are at other than the default settings. The result is that all comments -will be lost from the smb.conf file. Additionally, the parameters will be written back in -internal ordering. +parameter settings, so when SWAT writes the smb.conf file to disk, it will write only +those parameters that are at other than the default settings. The result is that all comments, +as well as parameters that are no longer supported, will be lost from the smb.conf file. +Additionally, the parameters will be written back in internal ordering.

    Note

    -So before using SWAT please be warned - SWAT will completely replace your smb.conf with -a fully optimised file that has been stripped of all comments you might have placed there +Before using SWAT, please be warned SWAT will completely replace your smb.conf with +a fully-optimized file that has been stripped of all comments you might have placed there and only non-default settings will be written to the file. -

    Enabling SWAT for use

    -SWAT should be installed to run via the network super daemon. Depending on which system -your UNIX/Linux system has you will have either an inetd or -xinetd based system. +

    Guidelines and Technical Tips

    +This section aims to unlock the dark secrets behind how SWAT may be made to work, +may be made more secure, and how to solve Internationalization support problems. +

    Validate SWAT Installation

    +The very first step that should be taken before attempting to configure a host +system for SWAT operation is to check that it is installed. This may seem a trivial +point to some, however several Linux distributions do not install SWAT by default, +even though they do ship an installable binary support package containing SWAT +on the distribution media. +

    +When you have configrmed that SWAT is installed it is necessary to validate +that the installation includes the binary swat file as well +as all the supporting text and Web files. A number of operating system distributions +in the past have failed to include the necessary support files, evne though the +swat binary executable file was installed. +

    +Finally, when you are sure that SWAT has been fully installed, please check the SWAT +has been enebled in the control file for the internetworking super-daemon (inetd or xinetd) +that is used on your operating system platform. +

    Locating the swat File

    +To validate that SWAT is installed, first locate the swat binary +file on the system. It may be found under the following directories: +

    /usr/local/samba/bin the default Samba location.
    /usr/sbin the default location on most Linux systems.
    /opt/samba/bin

    +

    +The actual location is much dependant on the choice of the operating system vendor, or as determined +by the administrator who compiled and installed Samba. +

    +There are a number methods that may be used to locate the swat binary file. +The following methods may be helpful: +

    +If swat is in your current operating system search path it will be easy to +find it. You can ask what are the command-line options for swat as shown here: +

    +frodo:~ # swat -?
    +Usage: swat [OPTION...]
    +  -a, --disable-authentication         Disable authentication (demo mode)
    +
    +Help options:
    +  -?, --help                           Show this help message
    +  --usage                              Display brief usage message
    +
    +Common samba options:
    +  -d, --debuglevel=DEBUGLEVEL          Set debug level
    +  -s, --configfile=CONFIGFILE          Use alternative configuration file
    +  -l, --log-basename=LOGFILEBASE       Basename for log/debug files
    +  -V, --version                        Print version
    +

    +

    Locating the SWAT Support Files

    +Now that you have found that swat is in the search path, it is easy +to identify where the file is located. Here is another simple way this may be done: +

    +frodo:~ # whereis swat
    +swat: /usr/sbin/swat /usr/share/man/man8/swat.8.gz
    +

    +

    +If the above measures fail to locate the swat binary, another approach +is needed. The following may be used: +

    +frodo:/ # find / -name swat -print
    +/etc/xinetd.d/swat
    +/usr/sbin/swat
    +/usr/share/samba/swat
    +frodo:/ #
    +

    +

    +This list shows that there is a control file for xinetd, the internetwork +super-daemon that is installed on this server. The location of the SWAT binary file is +/usr/sbin/swat, and the support files for it are located under the +directory /usr/share/samba/swat. +

    +We must now check where swat expects to find its support files. This can +be done as follows: +

    +frodo:/ # strings /usr/sbin/swat | grep "/swat"
    +/swat/
    +...
    +/usr/share/samba/swat
    +frodo:/ #
    +

    +

    +The /usr/share/samba/swat/ entry shown in this listing is the location of the +support files. You should verify that the support files exist under this directory. A sample +list is as shown: +

    +jht@frodo:/> find /usr/share/samba/swat -print
    +/usr/share/samba/swat
    +/usr/share/samba/swat/help
    +/usr/share/samba/swat/lang
    +/usr/share/samba/swat/lang/ja
    +/usr/share/samba/swat/lang/ja/help
    +/usr/share/samba/swat/lang/ja/help/welcome.html
    +/usr/share/samba/swat/lang/ja/images
    +/usr/share/samba/swat/lang/ja/images/home.gif
    +...
    +/usr/share/samba/swat/lang/ja/include
    +/usr/share/samba/swat/lang/ja/include/header.nocss.html
    +...
    +/usr/share/samba/swat/lang/tr
    +/usr/share/samba/swat/lang/tr/help
    +/usr/share/samba/swat/lang/tr/help/welcome.html
    +/usr/share/samba/swat/lang/tr/images
    +/usr/share/samba/swat/lang/tr/images/home.gif
    +...
    +/usr/share/samba/swat/lang/tr/include
    +/usr/share/samba/swat/lang/tr/include/header.html
    +/usr/share/samba/swat/using_samba
    +...
    +/usr/share/samba/swat/images
    +/usr/share/samba/swat/images/home.gif
    +...
    +/usr/share/samba/swat/include
    +/usr/share/samba/swat/include/footer.html
    +/usr/share/samba/swat/include/header.html
    +jht@frodo:/>
    +

    +

    +If the files needed are not available it will be necessary to obtain and install them +before SWAT can be used. +

    Enabling SWAT for Use

    +SWAT should be installed to run via the network super-daemon. Depending on which system +your UNIX/Linux system has, you will have either an inetd- or +xinetd-based system.

    The nature and location of the network super-daemon varies with the operating system implementation. The control file (or files) can be located in the file -/etc/inetd.conf or in the directory /etc/[x]inet.d +/etc/inetd.conf or in the directory /etc/[x]inet[d].d or similar.

    The control entry for the older style file might be: +

     	# swat is the Samba Web Administration Tool
     	swat stream tcp nowait.400 root /usr/sbin/swat swat
    @@ -36,164 +164,212 @@ The control entry for the older style file might be:
     A control file for the newer style xinetd could be:
     

    -	# default: off
    -	# description: SWAT is the Samba Web Admin Tool. Use swat \
    -	#              to configure your Samba server. To use SWAT, \
    -	#              connect to port 901 with your favorite web browser.
    -	service swat
    -	{
    -		port    = 901
    -		socket_type     = stream
    -		wait    = no
    -		only_from = localhost
    -		user    = root
    -		server  = /usr/sbin/swat
    -		log_on_failure  += USERID
    -		disable = yes
    -	}
    +# default: off
    +# description: SWAT is the Samba Web Admin Tool. Use swat \
    +#              to configure your Samba server. To use SWAT, \
    +#              connect to port 901 with your favorite web browser.
    +service swat
    +{
    +	port    = 901
    +	socket_type     = stream
    +	wait    = no
    +	only_from = localhost
    +	user    = root
    +	server  = /usr/sbin/swat
    +	log_on_failure  += USERID
    +	disable = yes
    +}
     

    -Both the above examples assume that the swat binary has been -located in the /usr/sbin directory. In addition to the above -SWAT will use a directory access point from which it will load it's help files +Both of the above examples assume that the swat binary has been +located in the /usr/sbin directory. In addition to the above, +SWAT will use a directory access point from which it will load its Help files as well as other control information. The default location for this on most Linux systems is in the directory /usr/share/samba/swat. The default -location using samba defaults will be /usr/local/samba/swat. +location using Samba defaults will be /usr/local/samba/swat.

    -Access to SWAT will prompt for a logon. If you log onto SWAT as any non-root user +Access to SWAT will prompt for a logon. If you log onto SWAT as any non-root user, the only permission allowed is to view certain aspects of configuration as well as access to the password change facility. The buttons that will be exposed to the non-root user are: HOME, STATUS, VIEW, PASSWORD. The only page that allows change capability in this case is PASSWORD.

    -So long as you log onto SWAT as the user root you should obtain -full change and commit ability. The buttons that will be exposed includes: +As long as you log onto SWAT as the user root, you should obtain +full change and commit ability. The buttons that will be exposed include: HOME, GLOBALS, SHARES, PRINTERS, WIZARD, STATUS, VIEW, PASSWORD. -

    Securing SWAT through SSL

    -Lots of people have asked about how to setup SWAT with SSL to allow for secure remote -administration of Samba. Here is a method that works, courtesy of Markus Krieger +

    Securing SWAT through SSL

    + +Many people have asked about how to setup SWAT with SSL to allow for secure remote +administration of Samba. Here is a method that works, courtesy of Markus Krieger.

    -Modifications to the swat setup are as following: +Modifications to the SWAT setup are as follows:

    1. - install OpenSSL + Install OpenSSL.

    2. - generate certificate and private key + Generate certificate and private key.

       root# /usr/bin/openssl req -new -x509 -days 365 -nodes -config \
       	/usr/share/doc/packages/stunnel/stunnel.cnf \
       	-out /etc/stunnel/stunnel.pem -keyout /etc/stunnel/stunnel.pem
       
    3. - remove swat-entry from [x]inetd + Remove swat-entry from [x]inetd.

    4. - start stunnel + Start stunnel.

       root# stunnel -p /etc/stunnel/stunnel.pem -d 901 \
       	 -l /usr/local/samba/bin/swat swat 
       

    -afterwords simply contact to swat by using the URL https://myhost:901, accept the certificate +Afterward, simply connect to swat by using the URL https://myhost:901, accept the certificate and the SSL connection is up. -

    The SWAT Home Page

    +

    Enabling SWAT Internationalization Support

    +SWAT can be configured to display its messages to match the settings of +the language configurations of your Web browser. It will be passed to SWAT +in the Accept-Language header of the HTTP request. +

    + +

    +To enable this feature: +

    + +

    • + Install the proper msg files from the Samba + source/po directory into $LIBDIR. +

    • + Set the correct locale value for display charset. +

    • + Set your browser's language setting. +

    + +

    +The name of msg file is same as the language ID sent by the browser. For +example en means "English", ja means "Japanese", fr means "French. +

    + +

    +If you do not like some of messages, or there are no msg files for +your locale, you can create them simply by copying the en.msg files +to the dirertory for “your language ID.msg” and filling in proper strings +to each “msgstr”. For example, in it.msg, the +msg file for the Italian locale, just set: +

    +msgid "Set Default"
    +msgstr "Imposta Default"
    +

    +and so on. If you find a mistake or create a new msg file, please email it +to us so we will include this in the next release of Samba. +

    + +

    +Note that if you enable this feature and the display charset is not +matched to your browser's setting, the SWAT display may be corrupted. In a future version of +Samba, SWAT will always display messages with UTF-8 encoding. You will then not need to set +this smb.conf file parameter. +

    Overview and Quick Tour

    +SWAT is a tools that many be used to configure Samba, or just to obtain useful links +to important reference materials such as the contents of this book, as well as other +documents that have been found useful for solving Windows networking problems. +

    The SWAT Home Page

    The SWAT title page provides access to the latest Samba documentation. The manual page for -each samba component is accessible from this page as are the Samba-HOWTO-Collection (this -document) as well as the O'Reilly book "Using Samba". +each Samba component is accessible from this page, as are the Samba HOWTO-Collection (this +document) as well as the O'Reilly book “Using Samba.

    -Administrators who wish to validate their samba configuration may obtain useful information +Administrators who wish to validate their Samba configuration may obtain useful information from the man pages for the diagnostic utilities. These are available from the SWAT home page -also. One diagnostic tool that is NOT mentioned on this page, but that is particularly -useful is ethereal. +also. One diagnostic tool that is not mentioned on this page, but that is particularly +useful is ethereal.

    Warning

    -SWAT can be configured to run in demo mode. This is NOT recommended -as it runs SWAT without authentication and with full administrative ability. ie: Allows -changes to smb.conf as well as general operation with root privileges. The option that -creates this ability is the -a flag to swat. Do not use this in any +SWAT can be configured to run in demo mode. This is not recommended +as it runs SWAT without authentication and with full administrative ability. Allows +changes to smb.conf as well as general operation with root privileges. The option that +creates this ability is the -a flag to swat. Do not use this in a production environment. -

    Global Settings

    -The Globals button will expose a page that allows configuration of the global parameters -in smb.conf. There are three levels of exposure of the parameters: +

    Global Settings

    +The GLOBALS button will expose a page that allows configuration of the global parameters +in smb.conf. There are two levels of exposure of the parameters:

    • - Basic - exposes common configuration options. + Basic exposes common configuration options.

    • - Advanced - exposes configuration options needed in more + Advanced exposes configuration options needed in more complex environments. -

    • - Developer - exposes configuration options that only the brave - will want to tamper with.

    -To switch to other than Basic editing ability click on either the -Advanced or the Developer button. You may also -do this by clicking on the radio button, then click the Commit Changes button. +To switch to other than Basic editing ability, click on Advanced. +You may also do this by clicking on the radio button, then click on the Commit Changes button.

    -After making any changes to configuration parameters make sure that you click on the -Commit Changes button before moving to another area otherwise -your changes will be immediately lost. +After making any changes to configuration parameters, make sure that +you click on the +Commit Changes button before moving to another area, otherwise +your changes will be lost.

    Note

    -SWAT has context sensitive help. To find out what each parameter is for simply click the +SWAT has context-sensitive help. To find out what each parameter is +for, simply click on the Help link to the left of the configuration parameter. -

    Share Settings

    -To affect a currently configured share, simply click on the pull down button between the +

    Share Settings

    +To effect a currently configured share, simply click on the pull down button between the Choose Share and the Delete Share buttons, -select the share you wish to operate on, then to edit the settings click on the -Choose Share button, to delete the share simply press the +select the share you wish to operate on, then to edit the settings +click on the +Choose Share button. To delete the share, simply press the Delete Share button.

    -To create a new share, next to the button labelled Create Share enter +To create a new share, next to the button labeled Create Share enter into the text field the name of the share to be created, then click on the Create Share button. -

    Printers Settings

    +

    Printers Settings

    To affect a currently configured printer, simply click on the pull down button between the Choose Printer and the Delete Printer buttons, -select the printer you wish to operate on, then to edit the settings click on the -Choose Printer button, to delete the share simply press the +select the printer you wish to operate on, then to edit the settings +click on the +Choose Printer button. To delete the share, simply press the Delete Printer button.

    -To create a new printer, next to the button labelled Create Printer enter +To create a new printer, next to the button labeled Create Printer enter into the text field the name of the share to be created, then click on the Create Printer button. -

    The SWAT Wizard

    -The purpose if the SWAT Wizard is to help the Microsoft knowledgeable network administrator +

    The SWAT Wizard

    +The purpose if the SWAT Wizard is to help the Microsoft-knowledgeable network administrator to configure Samba with a minimum of effort.

    -The Wizard page provides a tool for rewriting the smb.conf file in fully optimised format. -This will also happen if you press the commit button. The two differ in the the rewrite button -ignores any changes that may have been made, while the Commit button causes all changes to be -affected. +The Wizard page provides a tool for rewriting the smb.conf file in fully optimized format. +This will also happen if you press the Commit button. The two differ +since the Rewrite button ignores any changes that may have been made, +while the Commit button causes all changes to be affected.

    The Edit button permits the editing (setting) of the minimal set of options that may be necessary to create a working Samba server.

    Finally, there are a limited set of options that will determine what type of server Samba will be configured for, whether it will be a WINS server, participate as a WINS client, or -operate with no WINS support. By clicking on one button you can elect to expose (or not) user +operate with no WINS support. By clicking one button, you can elect to expose (or not) user home directories. -

    The Status Page

    -The status page serves a limited purpose. Firstly, it allows control of the samba daemons. -The key daemons that create the samba server environment are: smbd, nmbd, winbindd. +

    The Status Page

    +The status page serves a limited purpose. First, it allows control of the Samba daemons. +The key daemons that create the Samba server environment are: smbd, nmbd, winbindd.

    The daemons may be controlled individually or as a total group. Additionally, you may set -an automatic screen refresh timing. As MS Windows clients interact with Samba new smbd processes +an automatic screen refresh timing. As MS Windows clients interact with Samba, new smbd processes will be continually spawned. The auto-refresh facility will allow you to track the changing conditions with minimal effort.

    Lastly, the Status page may be used to terminate specific smbd client connections in order to free files that may be locked. -

    The View Page

    -This page allows the administrator to view the optimised smb.conf file and, if you are +

    The View Page

    +This page allows the administrator to view the optimized smb.conf file and, if you are particularly masochistic, will permit you also to see all possible global configuration parameters and their settings. -

    The Password Change Page

    -The Password Change page is a popular tool. This tool allows the creation, deletion, deactivation -and reactivation of MS Windows networking users on the local machine. Alternatively, you can use +

    The Password Change Page

    +The Password Change page is a popular tool that allows the creation, deletion, deactivation, +and reactivation of MS Windows networking users on the local machine. Alternately, you can use this tool to change a local password for a user account.

    -When logged in as a non-root account the user will have to provide the old password as well as -the new password (twice). When logged in as root only the new password is +When logged in as a non-root account, the user will have to provide the old password as well as +the new password (twice). When logged in as root, only the new password is required.

    One popular use for this tool is to change user passwords across a range of remote MS Windows servers. -

    +

    diff --git a/docs/htmldocs/Samba-Developers-Guide.html b/docs/htmldocs/Samba-Developers-Guide.html index 97e48f3e27..2c9329518b 100644 --- a/docs/htmldocs/Samba-Developers-Guide.html +++ b/docs/htmldocs/Samba-Developers-Guide.html @@ -20,21 +20,21 @@ people developing samba or those interested in doing so. It's nothing more than a collection of documents written by samba developers about the internals of various parts of samba and the SMB protocol. It's still incomplete. The most recent version of this document -can be found at http://devel.samba.org/. -Please send updates to Jelmer Vernooij. +can be found at http://devel.samba.org/. +Please send updates to Jelmer Vernooij.

    This documentation is distributed under the GNU General Public License (GPL) version 2. A copy of the license is included with the Samba source -distribution. A copy can be found on-line at http://www.fsf.org/licenses/gpl.txt -


    Table of Contents

    Attributions
    1. Definition of NetBIOS Protocol and Name Resolution Modes
    NETBIOS
    BROADCAST NetBIOS
    NBNS NetBIOS
    2. Samba Architecture
    Introduction
    Multithreading and Samba
    Threading smbd
    Threading nmbd
    nbmd Design
    3. The samba DEBUG system
    New Output Syntax
    The DEBUG() Macro
    The DEBUGADD() Macro
    The DEBUGLVL() Macro
    New Functions
    dbgtext()
    dbghdr()
    format_debug_text()
    4. Coding Suggestions
    5. Samba Internals
    Character Handling
    The new functions
    Macros in byteorder.h
    CVAL(buf,pos)
    PVAL(buf,pos)
    SCVAL(buf,pos,val)
    SVAL(buf,pos)
    IVAL(buf,pos)
    SVALS(buf,pos)
    IVALS(buf,pos)
    SSVAL(buf,pos,val)
    SIVAL(buf,pos,val)
    SSVALS(buf,pos,val)
    SIVALS(buf,pos,val)
    RSVAL(buf,pos)
    RIVAL(buf,pos)
    RSSVAL(buf,pos,val)
    RSIVAL(buf,pos,val)
    LAN Manager Samba API
    Parameters
    Return value
    Code character table
    6. The smb.conf file
    Lexical Analysis
    Handling of Whitespace
    Handling of Line Continuation
    Line Continuation Quirks
    Syntax
    About params.c
    7. NetBIOS in a Unix World
    Introduction
    Usernames
    File Ownership
    Passwords
    Locking
    Deny Modes
    Trapdoor UIDs
    Port numbers
    Protocol Complexity
    8. Tracing samba system calls
    9. Finding useful information on windows
    Netlogon debugging output
    10. NT Domain RPC's
    Introduction
    Sources
    Credits
    Notes and Structures
    Notes
    Enumerations
    Structures
    MSRPC over Transact Named Pipe
    MSRPC Pipes
    Header
    Tail
    RPC Bind / Bind Ack
    NTLSA Transact Named Pipe
    LSA Open Policy
    LSA Query Info Policy
    LSA Enumerate Trusted Domains
    LSA Open Secret
    LSA Close
    LSA Lookup SIDS
    LSA Lookup Names
    NETLOGON rpc Transact Named Pipe
    LSA Request Challenge
    LSA Authenticate 2
    LSA Server Password Set
    LSA SAM Logon
    LSA SAM Logoff
    \\MAILSLOT\NET\NTLOGON
    Query for PDC
    SAM Logon
    SRVSVC Transact Named Pipe
    Net Share Enum
    Net Server Get Info
    Cryptographic side of NT Domain Authentication
    Definitions
    Protocol
    Comments
    SIDs and RIDs
    Well-known SIDs
    Well-known RIDS
    11. Samba Printing Internals
    Abstract
    +distribution. A copy can be found on-line at http://www.fsf.org/licenses/gpl.txt +


    Table of Contents

    Attributions
    1. Definition of NetBIOS Protocol and Name Resolution Modes
    NETBIOS
    BROADCAST NetBIOS
    NBNS NetBIOS
    2. Samba Architecture
    Introduction
    Multithreading and Samba
    Threading smbd
    Threading nmbd
    nbmd Design
    3. The samba DEBUG system
    New Output Syntax
    The DEBUG() Macro
    The DEBUGADD() Macro
    The DEBUGLVL() Macro
    New Functions
    dbgtext()
    dbghdr()
    format_debug_text()
    4. Coding Suggestions
    5. Samba Internals
    Character Handling
    The new functions
    Macros in byteorder.h
    CVAL(buf,pos)
    PVAL(buf,pos)
    SCVAL(buf,pos,val)
    SVAL(buf,pos)
    IVAL(buf,pos)
    SVALS(buf,pos)
    IVALS(buf,pos)
    SSVAL(buf,pos,val)
    SIVAL(buf,pos,val)
    SSVALS(buf,pos,val)
    SIVALS(buf,pos,val)
    RSVAL(buf,pos)
    RIVAL(buf,pos)
    RSSVAL(buf,pos,val)
    RSIVAL(buf,pos,val)
    LAN Manager Samba API
    Parameters
    Return value
    Code character table
    6. The smb.conf file
    Lexical Analysis
    Handling of Whitespace
    Handling of Line Continuation
    Line Continuation Quirks
    Syntax
    About params.c
    7. NetBIOS in a Unix World
    Introduction
    Usernames
    File Ownership
    Passwords
    Locking
    Deny Modes
    Trapdoor UIDs
    Port numbers
    Protocol Complexity
    8. Tracing samba system calls
    9. Finding useful information on windows
    Netlogon debugging output
    10. NT Domain RPC's
    Introduction
    Sources
    Credits
    Notes and Structures
    Notes
    Enumerations
    Structures
    MSRPC over Transact Named Pipe
    MSRPC Pipes
    Header
    Tail
    RPC Bind / Bind Ack
    NTLSA Transact Named Pipe
    LSA Open Policy
    LSA Query Info Policy
    LSA Enumerate Trusted Domains
    LSA Open Secret
    LSA Close
    LSA Lookup SIDS
    LSA Lookup Names
    NETLOGON rpc Transact Named Pipe
    LSA Request Challenge
    LSA Authenticate 2
    LSA Server Password Set
    LSA SAM Logon
    LSA SAM Logoff
    \\MAILSLOT\NET\NTLOGON
    Query for PDC
    SAM Logon
    SRVSVC Transact Named Pipe
    Net Share Enum
    Net Server Get Info
    Cryptographic side of NT Domain Authentication
    Definitions
    Protocol
    Comments
    SIDs and RIDs
    Well-known SIDs
    Well-known RIDS
    11. Samba Printing Internals
    Abstract
    Printing Interface to Various Back ends -
    +
    Print Queue TDB's -
    +
    ChangeID and Client Caching of Printer Information -
    +
    Windows NT/2K Printer Change Notify -
    12. Samba WINS Internals
    WINS Failover
    13. The Upcoming SAM System
    Security in the 'new SAM'
    Standalone from UNIX
    Handles and Races in the new SAM
    Layers
    Application
    SAM Interface
    SAM Modules
    SAM Modules
    Special Module: sam_passdb
    sam_ads
    Memory Management
    Testing
    14. LanMan and NT Password Encryption
    Introduction
    How does it work?
    The smbpasswd file
    15. Modules
    Advantages
    Loading modules
    Static modules
    Shared modules
    Writing modules
    Static/Shared selection in configure.in
    16. RPC Pluggable Modules
    About
    General Overview
    17. VFS Modules
    The Samba (Posix) VFS layer
    The general interface
    Possible VFS operation layers
    The Interaction between the Samba VFS subsystem and the modules
    Initialization and registration
    How the Modules handle per connection data
    Upgrading to the New VFS Interface
    Upgrading from 2.2.* and 3.0aplha modules
    Some Notes
    Implement TRANSPARENT functions
    Implement OPAQUE functions
    18. Notes to packagers
    Versioning
    Modules
    19. Contributing code

    Attributions

    Definition of NetBIOS Protocol and Name Resolution Modes

    • Luke Leighton

    Samba Architecture

    • Dan Shearer

    The samba DEBUG system

    • Chris Hertel

    Coding Suggestions

    • Steve French

    • Simo Sorce

    • Andrew Bartlett

    • Tim Potter

    • Martin Pool

    Samba Internals

    The smb.conf file

    • Chris Hertel

    NetBIOS in a Unix World

    • Andrew Tridgell

    Tracing samba system calls

    • Andrew Tridgell

    Finding useful information on windows

    NT Domain RPC's

    Samba Printing Internals

    • Gerald Carter

    Samba WINS Internals

    • Gerald Carter

    The Upcoming SAM System

    • Andrew Bartlett

    LanMan and NT Password Encryption

    Modules

    RPC Pluggable Modules

    VFS Modules

    Notes to packagers

    • Jelmer Vernooij

    Contributing code

    Chapter 1. Definition of NetBIOS Protocol and Name Resolution Modes

    Luke Leighton

    12 June 1997

    Attributions

    • Luke Leighton

    • Dan Shearer

    • Chris Hertel

    • Steve French

    • Simo Sorce

    • Andrew Bartlett

    • Tim Potter

    • Martin Pool

    • David Chappell <David.Chappell@mail.trincoll.edu>

    • Chris Hertel

    • Andrew Tridgell

    • Andrew Tridgell

    • Jelmer R. Vernooij <jelmer@samba.org>

    • Andrew Tridgell <tridge@samba.org>

    • Luke Leighton <lkcl@switchboard.net>

    • Paul Ashton <paul@argo.demon.co.uk>

    • Duncan Stansfield <duncans@sco.com>

    • Gerald Carter

    • Gerald Carter

    • Andrew Bartlett

    • Jeremy Allison <samba@samba.org>

    • Jelmer Vernooij <jelmer@samba.org>

    • Anthony Liguori <aliguor@us.ibm.com>

    • Jelmer Vernooij <jelmer@samba.org>

    • Alexander Bokovoy <ab@samba.org>

    • Stefan Metzmacher <metze@metzemix.de>

    • Jelmer Vernooij

    • Jelmer R. Vernooij <jelmer@samba.org>

    Chapter 1. Definition of NetBIOS Protocol and Name Resolution Modes

    Luke Leighton

    12 June 1997

    NETBIOS

    NetBIOS runs over the following tranports: TCP/IP; NetBEUI and IPX/SPX. Samba only uses NetBIOS over TCP/IP. For details on the TCP/IP NetBIOS Session Service NetBIOS Datagram Service, and NetBIOS Names, see @@ -75,7 +75,7 @@ NetBIOS names are either UNIQUE or GROUP. Only one application can claim a UNIQUE NetBIOS name on a network.

    There are two kinds of NetBIOS Name resolution: Broadcast and Point-to-Point. -

    BROADCAST NetBIOS

    +

    BROADCAST NetBIOS

    Clients can claim names, and therefore offer services on successfully claimed names, on their broadcast-isolated subnet. One way to get NetBIOS services (such as browsing: see ftp.microsoft.com/drg/developr/CIFS/browdiff.txt; and @@ -87,7 +87,7 @@ find that some of your hosts spend 95 percent of their time dealing with broadcast traffic. [If you have IPX/SPX on your LAN or WAN, you will find that this is already happening: a packet analyzer will show, roughly every twelve minutes, great swathes of broadcast traffic!]. -

    NBNS NetBIOS

    +

    NBNS NetBIOS

    rfc1001.txt describes, amongst other things, the implementation and use of, a 'NetBIOS Name Service'. NT/AS offers 'Windows Internet Name Service' which is fully rfc1001/2 compliant, but has had to take specific action @@ -128,7 +128,7 @@ WINS Clients therefore claim names from the WINS server. If the WINS server allows them to register a name, the client's NetBIOS session service can then offer services on this name. Other WINS clients will then contact the WINS server to resolve a NetBIOS name. -

    Chapter 2. Samba Architecture

    Dan Shearer

    November 1997

    Introduction

    +

    Chapter 2. Samba Architecture

    Dan Shearer

    November 1997

    Introduction

    This document gives a general overview of how Samba works internally. The Samba Team has tried to come up with a model which is the best possible compromise between elegance, portability, security @@ -139,7 +139,7 @@ It also tries to answer some of the frequently asked questions such as:

    1. Is Samba secure when running on Unix? The xyz platform? What about the root priveliges issue? -

    2. Pros and cons of multithreading in various parts of Samba

    3. Why not have a separate process for name resolution, WINS, and browsing?

    Multithreading and Samba

    +

  • Pros and cons of multithreading in various parts of Samba

  • Why not have a separate process for name resolution, WINS, and browsing?

  • Multithreading and Samba

    People sometimes tout threads as a uniformly good thing. They are very nice in their place but are quite inappropriate for smbd. nmbd is another matter, and multi-threading it would be very nice. @@ -156,7 +156,7 @@ smbd multi-threaded. Multi-threading would actually make Samba much slower, less scalable, less portable and much less robust. The fact that we use a separate process for each connection is one of Samba's biggest advantages. -

    Threading smbd

    +

    Threading smbd

    A few problems that would arise from a threaded smbd are:

    1. It's not only to create threads instead of processes, but you @@ -181,7 +181,7 @@ A few problems that would arise from a threaded smbd are:

    2. we couldn't use the system locking calls as the locking context of fcntl() is a process, not a thread. -

    Threading nmbd

    +

    Threading nmbd

    This would be ideal, but gets sunk by portability requirements.

    Andrew tried to write a test threads library for nmbd that used only @@ -208,7 +208,7 @@ packet that arrives. Having a pool of processes is possible but is nasty to program cleanly due to the enormous amount of shared data (in complex structures) between the processes. We can't rely on each platform having a shared memory system. -

    nbmd Design

    +

    nbmd Design

    Originally Andrew used recursion to simulate a multi-threaded environment, which use the stack enormously and made for really confusing debugging sessions. Luke Leighton rewrote it to use a @@ -229,7 +229,7 @@ keeps the idea of a distinct packet. See "struct packet_struct" in nameserv.h. It has all the detail but none of the on-the-wire mess. This makes it ideal for using in disk or memory-based databases for browsing and WINS support. -

    Chapter 3. The samba DEBUG system

    Chris Hertel

    July 1998

    New Output Syntax

    +

    Chapter 3. The samba DEBUG system

    Chris Hertel

    July 1998

    New Output Syntax

    The syntax of a debugging log file is represented as:

       >debugfile< :== { >debugmsg< }
    @@ -282,7 +282,7 @@ by a newline.
     Note that in the above example the function names are not listed on
     the header line. That's because the example above was generated on an
     SGI Indy, and the SGI compiler doesn't support the __FUNCTION__ macro.
    -

    The DEBUG() Macro

    +

    The DEBUG() Macro

    Use of the DEBUG() macro is unchanged. DEBUG() takes two parameters. The first is the message level, the second is the body of a function call to the Debug1() function. @@ -333,7 +333,7 @@ would look like this: [1998/07/30 16:00:51, 0] file.c:function(261) .

    Which isn't much use. The format buffer kludge fixes this problem. -

    The DEBUGADD() Macro

    +

    The DEBUGADD() Macro

    In addition to the kludgey solution to the broken line problem described above, there is a clean solution. The DEBUGADD() macro never generates a header. It will append new text to the current debug @@ -347,7 +347,7 @@ DEBUGADD() macro is the same as that of the DEBUG() macro. This is the first line. This is the second line. This is the third line. -

    The DEBUGLVL() Macro

    +

    The DEBUGLVL() Macro

    One of the problems with the DEBUG() macro was that DEBUG() lines tended to get a bit long. Consider this example from nmbd_sendannounce.c: @@ -382,7 +382,7 @@ within the DEBUGLVL() block.

  • Processing that is only relevant to debug output can be contained within the DEBUGLVL() block. -

  • New Functions

    dbgtext()

    +

    New Functions

    dbgtext()

    This function prints debug message text to the debug file (and possibly to syslog) via the format buffer. The function uses a variable argument list just like printf() or Debug1(). The @@ -391,7 +391,7 @@ and then passed to format_debug_text(). If you use DEBUGLVL() you will probably print the body of the message using dbgtext(). -

    dbghdr()

    +

    dbghdr()

    This is the function that writes a debug message header. Headers are not processed via the format buffer. Also note that if the format buffer is not empty, a call to dbghdr() will not @@ -399,7 +399,7 @@ produce any output. See the comments in dbghdr() for more info.

    It is not likely that this function will be called directly. It is used by DEBUG() and DEBUGADD(). -

    format_debug_text()

    +

    format_debug_text()

    This is a static function in debug.c. It stores the output text for the body of the message in a buffer until it encounters a newline. When the newline character is found, the buffer is @@ -429,9 +429,9 @@ have observed that eight character tabs seem to be preferred in Samba source. If you are interested in the topic of coding style, two oft-quoted documents are:

    -http://lxr.linux.no/source/Documentation/CodingStyle +http://lxr.linux.no/source/Documentation/CodingStyle

    -http://www.fsf.org/prep/standards_toc.html +http://www.fsf.org/prep/standards_toc.html

    But note that coding style in Samba varies due to the many different programmers who have contributed. @@ -550,7 +550,7 @@ The suggestions above are simply that, suggestions, but the information may help in reducing the routine rework done on new code. The preceeding list is expected to change routinely as new support routines and macros are added. -

    Chapter 5. Samba Internals

    8 May 1996

    Character Handling

    +

    Chapter 5. Samba Internals

    8 May 1996

    Character Handling

    This section describes character set handling in Samba, as implemented in Samba 3.0 and above

    @@ -560,7 +560,7 @@ strings to/from DOS codepages. The problem is that there was no way of telling if a particular char* is in dos codepage or unix codepage. This led to a nightmare of code that tried to cope with particular cases without handlingt the general case. -

    The new functions

    +

    The new functions

    The new system works like this:

    1. all char* strings inside Samba are "unix" strings. These are @@ -622,28 +622,28 @@ The new system works like this: parameters is gone.

    2. all vfs functions take unix strings. Don't convert when passing to them -

    Macros in byteorder.h

    +

    Macros in byteorder.h

    This section describes the macros defined in byteorder.h. These macros are used extensively in the Samba code. -

    CVAL(buf,pos)

    +

    CVAL(buf,pos)

    returns the byte at offset pos within buffer buf as an unsigned character. -

    PVAL(buf,pos)

    returns the value of CVAL(buf,pos) cast to type unsigned integer.

    SCVAL(buf,pos,val)

    sets the byte at offset pos within buffer buf to value val.

    SVAL(buf,pos)

    +

    PVAL(buf,pos)

    returns the value of CVAL(buf,pos) cast to type unsigned integer.

    SCVAL(buf,pos,val)

    sets the byte at offset pos within buffer buf to value val.

    SVAL(buf,pos)

    returns the value of the unsigned short (16 bit) little-endian integer at offset pos within buffer buf. An integer of this type is sometimes refered to as "USHORT". -

    IVAL(buf,pos)

    returns the value of the unsigned 32 bit little-endian integer at offset -pos within buffer buf.

    SVALS(buf,pos)

    returns the value of the signed short (16 bit) little-endian integer at -offset pos within buffer buf.

    IVALS(buf,pos)

    returns the value of the signed 32 bit little-endian integer at offset pos -within buffer buf.

    SSVAL(buf,pos,val)

    sets the unsigned short (16 bit) little-endian integer at offset pos within -buffer buf to value val.

    SIVAL(buf,pos,val)

    sets the unsigned 32 bit little-endian integer at offset pos within buffer -buf to the value val.

    SSVALS(buf,pos,val)

    sets the short (16 bit) signed little-endian integer at offset pos within -buffer buf to the value val.

    SIVALS(buf,pos,val)

    sets the signed 32 bit little-endian integer at offset pos withing buffer -buf to the value val.

    RSVAL(buf,pos)

    returns the value of the unsigned short (16 bit) big-endian integer at -offset pos within buffer buf.

    RIVAL(buf,pos)

    returns the value of the unsigned 32 bit big-endian integer at offset -pos within buffer buf.

    RSSVAL(buf,pos,val)

    sets the value of the unsigned short (16 bit) big-endian integer at +

    IVAL(buf,pos)

    returns the value of the unsigned 32 bit little-endian integer at offset +pos within buffer buf.

    SVALS(buf,pos)

    returns the value of the signed short (16 bit) little-endian integer at +offset pos within buffer buf.

    IVALS(buf,pos)

    returns the value of the signed 32 bit little-endian integer at offset pos +within buffer buf.

    SSVAL(buf,pos,val)

    sets the unsigned short (16 bit) little-endian integer at offset pos within +buffer buf to value val.

    SIVAL(buf,pos,val)

    sets the unsigned 32 bit little-endian integer at offset pos within buffer +buf to the value val.

    SSVALS(buf,pos,val)

    sets the short (16 bit) signed little-endian integer at offset pos within +buffer buf to the value val.

    SIVALS(buf,pos,val)

    sets the signed 32 bit little-endian integer at offset pos withing buffer +buf to the value val.

    RSVAL(buf,pos)

    returns the value of the unsigned short (16 bit) big-endian integer at +offset pos within buffer buf.

    RIVAL(buf,pos)

    returns the value of the unsigned 32 bit big-endian integer at offset +pos within buffer buf.

    RSSVAL(buf,pos,val)

    sets the value of the unsigned short (16 bit) big-endian integer at offset pos within buffer buf to value val. -refered to as "USHORT".

    RSIVAL(buf,pos,val)

    sets the value of the unsigned 32 bit big-endian integer at offset -pos within buffer buf to value val.

    LAN Manager Samba API

    +refered to as "USHORT".

    RSIVAL(buf,pos,val)

    sets the value of the unsigned 32 bit big-endian integer at offset +pos within buffer buf to value val.

    LAN Manager Samba API

    This section describes the functions need to make a LAN Manager RPC call. This information had been obtained by examining the Samba code and the LAN Manager 2.0 API documentation. It should not be considered entirely @@ -656,7 +656,7 @@ call_api(int prcnt, int drcnt, int mprcnt, int mdrcnt,

    This function is defined in client.c. It uses an SMB transaction to call a remote api. -

    Parameters

    The parameters are as follows:

    1. +

      Parameters

      The parameters are as follows:

      1. prcnt: the number of bytes of parameters begin sent.

      2. drcnt: the number of bytes of data begin sent. @@ -701,7 +701,7 @@ substructures apply, this string is of zero length.

      The code in client.c always calls call_api() with no data. It is unclear when a non-zero length data buffer would be sent. -

      Return value

      +

      Return value

      The returned parameters (pointed to by rparam), in their order of appearance are:

      1. An unsigned 16 bit integer which contains the API function's return code. @@ -732,7 +732,7 @@ fix_char_ptr() in client.c can be used for this purpose. The third parameter (which may be read as "SVAL(rparam,4)") has something to do with indicating the amount of data returned or possibly the amount of data which can be returned if enough buffer space is allowed. -

      Code character table

      +

    Code character table

    Certain data structures are described by means of ASCIIz strings containing code characters. These are the code characters:

    1. @@ -755,7 +755,7 @@ r pointer to returned data buffer??? L length in bytes of returned data buffer???

    2. h number of bytes of information available??? -

    Chapter 6. The smb.conf file

    Chris Hertel

    November 1997

    Lexical Analysis

    +

    Chapter 6. The smb.conf file

    Chris Hertel

    November 1997

    Lexical Analysis

    Basically, the file is processed on a line by line basis. There are four types of lines that are recognized by the lexical analyzer (params.c): @@ -782,7 +782,7 @@ ignores them. The latter two line types are scanned for These are the only tokens passed to the parameter loader (loadparm.c). Parameter names and values are divided from one another by an equal sign: '='. -

    Handling of Whitespace

    +

    Handling of Whitespace

    Whitespace is defined as all characters recognized by the isspace() function (see ctype(3C)) except for the newline character ('\n') The newline is excluded because it identifies the end of the line. @@ -797,7 +797,7 @@ the exception of carriage return characters ('\r'), all of which are removed.

  • Leading and trailing whitespace is removed from names and values. -

  • Handling of Line Continuation

    +

    Handling of Line Continuation

    Long section header and parameter lines may be extended across multiple lines by use of the backslash character ('\\'). Line continuation is ignored for blank and comment lines. @@ -820,7 +820,7 @@ line, plus the four preceeding the word 'with' in the second line. Line continuation characters are ignored on blank lines and at the end of comments. They are *only* recognized within section and parameter lines. -

    Line Continuation Quirks

    Note the following example:

    +

    Line Continuation Quirks

    Note the following example:

     	param name = parameter value string \
         \
         with line continuation.
    @@ -844,7 +844,7 @@ terminating character, and the rest of the line is ignored.  The lines
     

    are read as

     	[section name]
         param name = value
    -

    Syntax

    The syntax of the smb.conf file is as follows:

    +

    Syntax

    The syntax of the smb.conf file is as follows:

       <file>            :==  { <section> } EOF
       <section>         :==  <section header> { <parameter line> }
       <section header>  :==  '[' NAME ']'
    @@ -863,12 +863,12 @@ terminating character, and the rest of the line is ignored.  The lines
     	A parameter line is divided into a NAME and a VALUE.  The *first*
     	equal sign on the line separates the NAME from the VALUE.  The
     	VALUE is terminated by a newline character (NL = '\n').
    -

    About params.c

    +

    About params.c

    The parsing of the config file is a bit unusual if you are used to lex, yacc, bison, etc. Both lexical analysis (scanning) and parsing are performed by params.c. Values are loaded via callbacks to loadparm.c. -

    Chapter 7. NetBIOS in a Unix World

    Andrew Tridgell

    April 1995

    Introduction

    +

    Chapter 7. NetBIOS in a Unix World

    Andrew Tridgell

    April 1995

    Introduction

    This is a short document that describes some of the issues that confront a SMB implementation on unix, and how Samba copes with them. They may help people who are looking at unix<->PC @@ -876,7 +876,7 @@ interoperability.

    It was written to help out a person who was writing a paper on unix to PC connectivity. -

    Usernames

    +

    Usernames

    The SMB protocol has only a loose username concept. Early SMB protocols (such as CORE and COREPLUS) have no username concept at all. Even in later protocols clients often attempt operations @@ -913,7 +913,7 @@ in the vast majority of cases. The methods include username maps, the service%user syntax, the saving of session setup usernames for later validation and the derivation of the username from the service name (either directly or via the user= option). -

    File Ownership

    +

    File Ownership

    The commonly used SMB protocols have no way of saying "you can't do that because you don't own the file". They have, in fact, no concept of file ownership at all. @@ -931,7 +931,7 @@ file time comparisons right. There are several possible solutions to this problem, including username mapping, and forcing a specific username for particular shares. -

    Passwords

    +

    Passwords

    Many SMB clients uppercase passwords before sending them. I have no idea why they do this. Interestingly WfWg uppercases the password only if the server is running a protocol greater than COREPLUS, so @@ -953,7 +953,7 @@ This means that it is *VERY* important to ensure that the Samba smbpasswd file containing these password hashes is only readable by the root user. See the documentation ENCRYPTION.txt for more details. -

    Locking

    +

    Locking

    Since samba 2.2, samba supports other types of locking as well. This section is outdated.

    @@ -984,7 +984,7 @@ asking the server to notify it if anyone else tries to do something on the same file, at which time the client will say if it is willing to give up its lock. Unix has no simple way of implementing opportunistic locking, and currently Samba has no support for it. -

    Deny Modes

    +

    Deny Modes

    When a SMB client opens a file it asks for a particular "deny mode" to be placed on the file. These modes (DENY_NONE, DENY_READ, DENY_WRITE, DENY_ALL, DENY_FCB and DENY_DOS) specify what actions should be @@ -998,7 +998,7 @@ directory or a shared memory implementation. The lock file method is clumsy and consumes processing and file resources, the shared memory implementation is vastly prefered and is turned on by default for those systems that support it. -

    Trapdoor UIDs

    +

    Trapdoor UIDs

    A SMB session can run with several uids on the one socket. This happens when a user connects to two shares with different usernames. To cope with this the unix server needs to switch uids @@ -1008,7 +1008,7 @@ a single uid.

    Note that you can also get the "trapdoor uid" message for other reasons. Please see the FAQ for details. -

    Port numbers

    +

    Port numbers

    There is a convention that clients on sockets use high "unprivilaged" port numbers (>1000) and connect to servers on low "privilaged" port numbers. This is enforced in Unix as non-root users can't open a @@ -1031,7 +1031,7 @@ to any of these OSes unless they are running as root. The answer comes back, but it goes to port 137 which the unix user can't listen on. Interestingly WinNT3.1 got this right - it sends node status responses back to the source port in the request. -

    Protocol Complexity

    +

    Protocol Complexity

    There are many "protocol levels" in the SMB protocol. It seems that each time new functionality was added to a Microsoft operating system, they added the equivalent functions in a new protocol level of the SMB @@ -1145,9 +1145,9 @@ causes printing to fail with Samba: The process is trying to first open /dev/null read-write then read-only. Both fail. This means /dev/null has incorrect permissions. -

    Chapter 9. Finding useful information on windows

    Jelmer R. Vernooij

    The Samba Team

    Andrew Tridgell

    Samba Team

    Table of Contents

    Netlogon debugging output

    Netlogon debugging output

    1. stop netlogon service on PDC

    2. rename original netlogon.dll to netlogon.dll.original

    3. copy checked version of netlogon.dll to system32 directory

    4. set HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\DBFlag to 0x20000004

    5. start netlogon service on PDC

    Chapter 10. NT Domain RPC's

    Luke Leighton

    Duncan Stansfield

    01 November 97(version 0.0.24)

    Introduction

    +

    Chapter 9. Finding useful information on windows

    Jelmer R. Vernooij

    The Samba Team

    Andrew Tridgell

    Samba Team

    Table of Contents

    Netlogon debugging output

    Netlogon debugging output

    1. stop netlogon service on PDC

    2. rename original netlogon.dll to netlogon.dll.original

    3. copy checked version of netlogon.dll to system32 directory

    4. set HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\DBFlag to 0x20000004

    5. start netlogon service on PDC

    Chapter 10. NT Domain RPC's

    Luke Leighton

    Duncan Stansfield

    01 November 97(version 0.0.24)

    Introduction

    This document contains information to provide an NT workstation with login -services, without the need for an NT server. It is the sgml version of http://mailhost.cb1.com/~lkcl/cifsntdomain.txt, controlled by Luke. +services, without the need for an NT server. It is the sgml version of http://mailhost.cb1.com/~lkcl/cifsntdomain.txt, controlled by Luke.

    It should be possible to select a domain instead of a workgroup (in the NT workstation's TCP/IP settings) and after the obligatory reboot, type in a @@ -1169,10 +1169,10 @@ This document is available from comp.protocols.smb; from the ntsecurity.net digest and from the samba digest, amongst other sources.

    A copy is available from: -

    http://ntbugtraq.rc.on.ca/SCRIPTS/WA.EXE?A2=ind9708;L=ntbugtraq;O=A;P=2935

    http://mailhost.cb1.com/~lkcl/crypt.html

    -A c-code implementation, provided by Linus Nordberg +

    http://ntbugtraq.rc.on.ca/SCRIPTS/WA.EXE?A2=ind9708;L=ntbugtraq;O=A;P=2935

    http://mailhost.cb1.com/~lkcl/crypt.html

    +A c-code implementation, provided by Linus Nordberg of this protocol is available from: -

    http://samba.org/cgi-bin/mfs/01/digest/1997/97aug/0391.html

    http://mailhost.cb1.com/~lkcl/crypt.txt

    +

    http://samba.org/cgi-bin/mfs/01/digest/1997/97aug/0391.html

    http://mailhost.cb1.com/~lkcl/crypt.txt

    Also used to provide debugging information is the Check Build version of NT workstation, and enabling full debugging in NETLOGON. This is achieved by setting the following REG_SZ registry key to 0x1ffffff: @@ -1191,7 +1191,7 @@ Failure to return this error code will make the workstation report that it is already a member of the domain.

  • the cryptographic side of the NetrServerPasswordSet command, which would allow the workstation to change its password. This password is used to generate the long-term session key. [It is possible to reject this -command, and keep the default workstation password].

  • Sources

    cket Traces from Netmonitor (Service Pack 1 and above)
    ul Ashton and Luke Leighton's other "NT Domain" doc.
    FS documentation - cifs6.txt
    FS documentation - cifsrap2.txt

    Credits

    Paul Ashton: loads of work with Net Monitor; understanding the NT authentication system; reference implementation of the NT domain support on which this document is originally based.
    Duncan Stansfield: low-level analysis of MSRPC Pipes.
    Linus Nordberg: producing c-code from Paul's crypto spec.
    Windows Sourcer development team

    Notes and Structures

    Notes

    1. +command, and keep the default workstation password].

    Sources

    cket Traces from Netmonitor (Service Pack 1 and above)
    ul Ashton and Luke Leighton's other "NT Domain" doc.
    FS documentation - cifs6.txt
    FS documentation - cifsrap2.txt

    Credits

    Paul Ashton: loads of work with Net Monitor; understanding the NT authentication system; reference implementation of the NT domain support on which this document is originally based.
    Duncan Stansfield: low-level analysis of MSRPC Pipes.
    Linus Nordberg: producing c-code from Paul's crypto spec.
    Windows Sourcer development team

    Notes and Structures

    Notes

    1. In the SMB Transact pipes, some "Structures", described here, appear to be 4-byte aligned with the SMB header, at their start. Exactly which "Structures" need aligning is not precisely known or documented. @@ -1219,15 +1219,15 @@ into or taken out of the SMB data stream. if the count is non-zero, then the pointer is also non-zero. immediately following the pointer is the count again, followed by an array of container sub-structures. the count appears a third time after the last sub-structure. -

    Enumerations

    MSRPC Header type

    command number in the msrpc packet header

    MSRPC_Request:

    0x00

    MSRPC_Response:

    0x02

    MSRPC_Bind:

    0x0B

    MSRPC_BindAck:

    0x0C

    MSRPC Packet info

    The meaning of these flags is undocumented

    FirstFrag:

    0x01

    LastFrag:

    0x02

    NotaFrag:

    0x04

    RecRespond:

    0x08

    NoMultiplex:

    0x10

    NotForIdemp:

    0x20

    NotforBcast:

    0x40

    NoUuid:

    0x80

    Structures

    VOID *

    sizeof VOID* is 32 bits.

    char

    sizeof char is 8 bits.

    UTIME

    UTIME is 32 bits, indicating time in seconds since 01jan1970. documented in cifs6.txt (section 3.5 page, page 30).

    NTTIME

    NTTIME is 64 bits. documented in cifs6.txt (section 3.5 page, page 30).

    DOM_SID (domain SID structure)

    UINT32

    num of sub-authorities in domain SID

    UINT8

    SID revision number

    UINT8

    num of sub-authorities in domain SID

    UINT8[6]

    6 bytes for domain SID - Identifier Authority.

    UINT16[n_subauths]

    domain SID sub-authorities

    Note: the domain SID is documented elsewhere. -

    STR (string)

    STR (string) is a char[] : a null-terminated string of ascii characters.

    UNIHDR (unicode string header)

    UINT16

    length of unicode string

    UINT16

    max length of unicode string

    UINT32

    4 - undocumented.

    UNIHDR2 (unicode string header plus buffer pointer)

    UNIHDR

    unicode string header

    VOID*

    undocumented buffer pointer

    UNISTR (unicode string)

    UINT16[]

    null-terminated string of unicode characters.

    NAME (length-indicated unicode string)

    UINT32

    length of unicode string

    UINT16[]

    null-terminated string of unicode characters.

    UNISTR2 (aligned unicode string)

    UINT8[]

    padding to get unicode string 4-byte aligned with the start of the SMB header.

    UINT32

    max length of unicode string

    UINT32

    0 - undocumented

    UINT32

    length of unicode string

    UINT16[]

    string of uncode characters

    OBJ_ATTR (object attributes)

    UINT32

    0x18 - length (in bytes) including the length field.

    VOID*

    0 - root directory (pointer)

    VOID*

    0 - object name (pointer)

    UINT32

    0 - attributes (undocumented)

    VOID*

    0 - security descriptior (pointer)

    UINT32

    0 - security quality of service

    POL_HND (LSA policy handle)

    char[20]

    policy handle

    DOM_SID2 (domain SID structure, SIDS stored in unicode)

    UINT32

    5 - SID type

    UINT32

    0 - undocumented

    UNIHDR2

    domain SID unicode string header

    UNISTR

    domain SID unicode string

    Note: there is a conflict between the unicode string header and the unicode string itself as to which to use to indicate string length. this will need to be resolved.

    Note: the SID type indicates, for example, an alias; a well-known group etc. this is documented somewhere.

    DOM_RID (domain RID structure)

    UINT32

    5 - well-known SID. 1 - user SID (see ShowACLs)

    UINT32

    5 - undocumented

    UINT32

    domain RID

    UINT32

    0 - domain index out of above reference domains

    LOG_INFO (server, account, client structure)

    Note: logon server name starts with two '\' characters and is upper case.

    Note: account name is the logon client name from the LSA Request Challenge, with a $ on the end of it, in upper case.

    VOID*

    undocumented buffer pointer

    UNISTR2

    logon server unicode string

    UNISTR2

    account name unicode string

    UINT16

    sec_chan - security channel type

    UNISTR2

    logon client machine unicode string

    CLNT_SRV (server, client names structure)

    Note: logon server name starts with two '\' characters and is upper case.

    VOID*

    undocumented buffer pointer

    UNISTR2

    logon server unicode string

    VOID*

    undocumented buffer pointer

    UNISTR2

    logon client machine unicode string

    CREDS (credentials + time stamp)

    char[8]

    credentials

    UTIME

    time stamp

    CLNT_INFO2 (server, client structure, client credentials)

    Note: whenever this structure appears in a request, you must take a copy of the client-calculated credentials received, because they will beused in subsequent credential checks. the presumed intention is to - maintain an authenticated request/response trail.

    CLNT_SRV

    client and server names

    UINT8[]

    ???? padding, for 4-byte alignment with SMB header.

    VOID*

    pointer to client credentials.

    CREDS

    client-calculated credentials + client time

    CLNT_INFO (server, account, client structure, client credentials)

    Note: whenever this structure appears in a request, you must take a copy of the client-calculated credentials received, because they will be used in subsequent credential checks. the presumed intention is to maintain an authenticated request/response trail.

    LOG_INFO

    logon account info

    CREDS

    client-calculated credentials + client time

    ID_INFO_1 (id info structure, auth level 1)

    VOID*

    ptr_id_info_1

    UNIHDR

    domain name unicode header

    UINT32

    param control

    UINT64

    logon ID

    UNIHDR

    user name unicode header

    UNIHDR

    workgroup name unicode header

    char[16]

    arc4 LM OWF Password

    char[16]

    arc4 NT OWF Password

    UNISTR2

    domain name unicode string

    UNISTR2

    user name unicode string

    UNISTR2

    workstation name unicode string

    SAM_INFO (sam logon/logoff id info structure)

    Note: presumably, the return credentials is supposedly for the server to verify that the credential chain hasn't been compromised.

    CLNT_INFO2

    client identification/authentication info

    VOID*

    pointer to return credentials.

    CRED

    return credentials - ignored.

    UINT16

    logon level

    UINT16

    switch value

    +

    Enumerations

    MSRPC Header type

    command number in the msrpc packet header

    MSRPC_Request:

    0x00

    MSRPC_Response:

    0x02

    MSRPC_Bind:

    0x0B

    MSRPC_BindAck:

    0x0C

    MSRPC Packet info

    The meaning of these flags is undocumented

    FirstFrag:

    0x01

    LastFrag:

    0x02

    NotaFrag:

    0x04

    RecRespond:

    0x08

    NoMultiplex:

    0x10

    NotForIdemp:

    0x20

    NotforBcast:

    0x40

    NoUuid:

    0x80

    Structures

    VOID *

    sizeof VOID* is 32 bits.

    char

    sizeof char is 8 bits.

    UTIME

    UTIME is 32 bits, indicating time in seconds since 01jan1970. documented in cifs6.txt (section 3.5 page, page 30).

    NTTIME

    NTTIME is 64 bits. documented in cifs6.txt (section 3.5 page, page 30).

    DOM_SID (domain SID structure)

    UINT32

    num of sub-authorities in domain SID

    UINT8

    SID revision number

    UINT8

    num of sub-authorities in domain SID

    UINT8[6]

    6 bytes for domain SID - Identifier Authority.

    UINT16[n_subauths]

    domain SID sub-authorities

    Note: the domain SID is documented elsewhere. +

    STR (string)

    STR (string) is a char[] : a null-terminated string of ascii characters.

    UNIHDR (unicode string header)

    UINT16

    length of unicode string

    UINT16

    max length of unicode string

    UINT32

    4 - undocumented.

    UNIHDR2 (unicode string header plus buffer pointer)

    UNIHDR

    unicode string header

    VOID*

    undocumented buffer pointer

    UNISTR (unicode string)

    UINT16[]

    null-terminated string of unicode characters.

    NAME (length-indicated unicode string)

    UINT32

    length of unicode string

    UINT16[]

    null-terminated string of unicode characters.

    UNISTR2 (aligned unicode string)

    UINT8[]

    padding to get unicode string 4-byte aligned with the start of the SMB header.

    UINT32

    max length of unicode string

    UINT32

    0 - undocumented

    UINT32

    length of unicode string

    UINT16[]

    string of uncode characters

    OBJ_ATTR (object attributes)

    UINT32

    0x18 - length (in bytes) including the length field.

    VOID*

    0 - root directory (pointer)

    VOID*

    0 - object name (pointer)

    UINT32

    0 - attributes (undocumented)

    VOID*

    0 - security descriptior (pointer)

    UINT32

    0 - security quality of service

    POL_HND (LSA policy handle)

    char[20]

    policy handle

    DOM_SID2 (domain SID structure, SIDS stored in unicode)

    UINT32

    5 - SID type

    UINT32

    0 - undocumented

    UNIHDR2

    domain SID unicode string header

    UNISTR

    domain SID unicode string

    Note: there is a conflict between the unicode string header and the unicode string itself as to which to use to indicate string length. this will need to be resolved.

    Note: the SID type indicates, for example, an alias; a well-known group etc. this is documented somewhere.

    DOM_RID (domain RID structure)

    UINT32

    5 - well-known SID. 1 - user SID (see ShowACLs)

    UINT32

    5 - undocumented

    UINT32

    domain RID

    UINT32

    0 - domain index out of above reference domains

    LOG_INFO (server, account, client structure)

    Note: logon server name starts with two '\' characters and is upper case.

    Note: account name is the logon client name from the LSA Request Challenge, with a $ on the end of it, in upper case.

    VOID*

    undocumented buffer pointer

    UNISTR2

    logon server unicode string

    UNISTR2

    account name unicode string

    UINT16

    sec_chan - security channel type

    UNISTR2

    logon client machine unicode string

    CLNT_SRV (server, client names structure)

    Note: logon server name starts with two '\' characters and is upper case.

    VOID*

    undocumented buffer pointer

    UNISTR2

    logon server unicode string

    VOID*

    undocumented buffer pointer

    UNISTR2

    logon client machine unicode string

    CREDS (credentials + time stamp)

    char[8]

    credentials

    UTIME

    time stamp

    CLNT_INFO2 (server, client structure, client credentials)

    Note: whenever this structure appears in a request, you must take a copy of the client-calculated credentials received, because they will beused in subsequent credential checks. the presumed intention is to + maintain an authenticated request/response trail.

    CLNT_SRV

    client and server names

    UINT8[]

    ???? padding, for 4-byte alignment with SMB header.

    VOID*

    pointer to client credentials.

    CREDS

    client-calculated credentials + client time

    CLNT_INFO (server, account, client structure, client credentials)

    Note: whenever this structure appears in a request, you must take a copy of the client-calculated credentials received, because they will be used in subsequent credential checks. the presumed intention is to maintain an authenticated request/response trail.

    LOG_INFO

    logon account info

    CREDS

    client-calculated credentials + client time

    ID_INFO_1 (id info structure, auth level 1)

    VOID*

    ptr_id_info_1

    UNIHDR

    domain name unicode header

    UINT32

    param control

    UINT64

    logon ID

    UNIHDR

    user name unicode header

    UNIHDR

    workgroup name unicode header

    char[16]

    arc4 LM OWF Password

    char[16]

    arc4 NT OWF Password

    UNISTR2

    domain name unicode string

    UNISTR2

    user name unicode string

    UNISTR2

    workstation name unicode string

    SAM_INFO (sam logon/logoff id info structure)

    Note: presumably, the return credentials is supposedly for the server to verify that the credential chain hasn't been compromised.

    CLNT_INFO2

    client identification/authentication info

    VOID*

    pointer to return credentials.

    CRED

    return credentials - ignored.

    UINT16

    logon level

    UINT16

    switch value

             switch (switch_value)
             case 1:
             {
                 ID_INFO_1     id_info_1;
             }
    -

    GID (group id info)

    UINT32

    group id

    UINT32

    user attributes (only used by NT 3.1 and 3.51)

    DOM_REF (domain reference info)

    VOID*

    undocumented buffer pointer.

    UINT32

    num referenced domains?

    VOID*

    undocumented domain name buffer pointer.

    UINT32

    32 - max number of entries

    UINT32

    4 - num referenced domains?

    UNIHDR2

    domain name unicode string header

    UNIHDR2[num_ref_doms-1]

    referenced domain unicode string headers

    UNISTR

    domain name unicode string

    DOM_SID[num_ref_doms]

    referenced domain SIDs

    DOM_INFO (domain info, levels 3 and 5 are the same))

    UINT8[]

    ??? padding to get 4-byte alignment with start of SMB header

    UINT16

    domain name string length * 2

    UINT16

    domain name string length * 2

    VOID*

    undocumented domain name string buffer pointer

    VOID*

    undocumented domain SID string buffer pointer

    UNISTR2

    domain name (unicode string)

    DOM_SID

    domain SID

    USER_INFO (user logon info)

    Note: it would be nice to know what the 16 byte user session key is for.

    NTTIME

    logon time

    NTTIME

    logoff time

    NTTIME

    kickoff time

    NTTIME

    password last set time

    NTTIME

    password can change time

    NTTIME

    password must change time

    UNIHDR

    username unicode string header

    UNIHDR

    user's full name unicode string header

    UNIHDR

    logon script unicode string header

    UNIHDR

    profile path unicode string header

    UNIHDR

    home directory unicode string header

    UNIHDR

    home directory drive unicode string header

    UINT16

    logon count

    UINT16

    bad password count

    UINT32

    User ID

    UINT32

    Group ID

    UINT32

    num groups

    VOID*

    undocumented buffer pointer to groups.

    UINT32

    user flags

    char[16]

    user session key

    UNIHDR

    logon server unicode string header

    UNIHDR

    logon domain unicode string header

    VOID*

    undocumented logon domain id pointer

    char[40]

    40 undocumented padding bytes. future expansion?

    UINT32

    0 - num_other_sids?

    VOID*

    NULL - undocumented pointer to other domain SIDs.

    UNISTR2

    username unicode string

    UNISTR2

    user's full name unicode string

    UNISTR2

    logon script unicode string

    UNISTR2

    profile path unicode string

    UNISTR2

    home directory unicode string

    UNISTR2

    home directory drive unicode string

    UINT32

    num groups

    GID[num_groups]

    group info

    UNISTR2

    logon server unicode string

    UNISTR2

    logon domain unicode string

    DOM_SID

    domain SID

    DOM_SID[num_sids]

    other domain SIDs?

    SH_INFO_1_PTR (pointers to level 1 share info strings)

    Note: see cifsrap2.txt section5, page 10.

    0 for shi1_type indicates a Disk.
    1 for shi1_type indicates a Print Queue.
    2 for shi1_type indicates a Device.
    3 for shi1_type indicates an IPC pipe.
    0x8000 0000 (top bit set in shi1_type) indicates a hidden share.
    VOID*

    shi1_netname - pointer to net name

    UINT32

    shi1_type - type of share. 0 - undocumented.

    VOID*

    shi1_remark - pointer to comment.

    SH_INFO_1_STR (level 1 share info strings)

    UNISTR2

    shi1_netname - unicode string of net name

    UNISTR2

    shi1_remark - unicode string of comment.

    SHARE_INFO_1_CTR

    share container with 0 entries:

    UINT32

    0 - EntriesRead

    UINT32

    0 - Buffer

    share container with > 0 entries:

    UINT32

    EntriesRead

    UINT32

    non-zero - Buffer

    UINT32

    EntriesRead

    SH_INFO_1_PTR[EntriesRead]

    share entry pointers

    SH_INFO_1_STR[EntriesRead]

    share entry strings

    UINT8[]

    padding to get unicode string 4-byte aligned with start of the SMB header.

    UINT32

    EntriesRead

    UINT32

    0 - padding

    SERVER_INFO_101

    Note: see cifs6.txt section 6.4 - the fields described therein will be of assistance here. for example, the type listed below is the same as fServerType, which is described in 6.4.1.

    SV_TYPE_WORKSTATION

    0x00000001 All workstations

    SV_TYPE_SERVER

    0x00000002 All servers

    SV_TYPE_SQLSERVER

    0x00000004 Any server running with SQL server

    SV_TYPE_DOMAIN_CTRL

    0x00000008 Primary domain controller

    SV_TYPE_DOMAIN_BAKCTRL

    0x00000010 Backup domain controller

    SV_TYPE_TIME_SOURCE

    0x00000020 Server running the timesource service

    SV_TYPE_AFP

    0x00000040 Apple File Protocol servers

    SV_TYPE_NOVELL

    0x00000080 Novell servers

    SV_TYPE_DOMAIN_MEMBER

    0x00000100 Domain Member

    SV_TYPE_PRINTQ_SERVER

    0x00000200 Server sharing print queue

    SV_TYPE_DIALIN_SERVER

    0x00000400 Server running dialin service.

    SV_TYPE_XENIX_SERVER

    0x00000800 Xenix server

    SV_TYPE_NT

    0x00001000 NT server

    SV_TYPE_WFW

    0x00002000 Server running Windows for

    SV_TYPE_SERVER_NT

    0x00008000 Windows NT non DC server

    SV_TYPE_POTENTIAL_BROWSER

    0x00010000 Server that can run the browser service

    SV_TYPE_BACKUP_BROWSER

    0x00020000 Backup browser server

    SV_TYPE_MASTER_BROWSER

    0x00040000 Master browser server

    SV_TYPE_DOMAIN_MASTER

    0x00080000 Domain Master Browser server

    SV_TYPE_LOCAL_LIST_ONLY

    0x40000000 Enumerate only entries marked "local"

    SV_TYPE_DOMAIN_ENUM

    0x80000000 Enumerate Domains. The pszServer and pszDomain parameters must be NULL.

    UINT32

    500 - platform_id

    VOID*

    pointer to name

    UINT32

    5 - major version

    UINT32

    4 - minor version

    UINT32

    type (SV_TYPE_... bit field)

    VOID*

    pointer to comment

    UNISTR2

    sv101_name - unicode string of server name

    UNISTR2

    sv_101_comment - unicode string of server comment.

    UINT8[]

    padding to get unicode string 4-byte aligned with start of the SMB header.

    MSRPC over Transact Named Pipe

    For details on the SMB Transact Named Pipe, see cifs6.txt

    MSRPC Pipes

    +

    GID (group id info)

    UINT32

    group id

    UINT32

    user attributes (only used by NT 3.1 and 3.51)

    DOM_REF (domain reference info)

    VOID*

    undocumented buffer pointer.

    UINT32

    num referenced domains?

    VOID*

    undocumented domain name buffer pointer.

    UINT32

    32 - max number of entries

    UINT32

    4 - num referenced domains?

    UNIHDR2

    domain name unicode string header

    UNIHDR2[num_ref_doms-1]

    referenced domain unicode string headers

    UNISTR

    domain name unicode string

    DOM_SID[num_ref_doms]

    referenced domain SIDs

    DOM_INFO (domain info, levels 3 and 5 are the same))

    UINT8[]

    ??? padding to get 4-byte alignment with start of SMB header

    UINT16

    domain name string length * 2

    UINT16

    domain name string length * 2

    VOID*

    undocumented domain name string buffer pointer

    VOID*

    undocumented domain SID string buffer pointer

    UNISTR2

    domain name (unicode string)

    DOM_SID

    domain SID

    USER_INFO (user logon info)

    Note: it would be nice to know what the 16 byte user session key is for.

    NTTIME

    logon time

    NTTIME

    logoff time

    NTTIME

    kickoff time

    NTTIME

    password last set time

    NTTIME

    password can change time

    NTTIME

    password must change time

    UNIHDR

    username unicode string header

    UNIHDR

    user's full name unicode string header

    UNIHDR

    logon script unicode string header

    UNIHDR

    profile path unicode string header

    UNIHDR

    home directory unicode string header

    UNIHDR

    home directory drive unicode string header

    UINT16

    logon count

    UINT16

    bad password count

    UINT32

    User ID

    UINT32

    Group ID

    UINT32

    num groups

    VOID*

    undocumented buffer pointer to groups.

    UINT32

    user flags

    char[16]

    user session key

    UNIHDR

    logon server unicode string header

    UNIHDR

    logon domain unicode string header

    VOID*

    undocumented logon domain id pointer

    char[40]

    40 undocumented padding bytes. future expansion?

    UINT32

    0 - num_other_sids?

    VOID*

    NULL - undocumented pointer to other domain SIDs.

    UNISTR2

    username unicode string

    UNISTR2

    user's full name unicode string

    UNISTR2

    logon script unicode string

    UNISTR2

    profile path unicode string

    UNISTR2

    home directory unicode string

    UNISTR2

    home directory drive unicode string

    UINT32

    num groups

    GID[num_groups]

    group info

    UNISTR2

    logon server unicode string

    UNISTR2

    logon domain unicode string

    DOM_SID

    domain SID

    DOM_SID[num_sids]

    other domain SIDs?

    SH_INFO_1_PTR (pointers to level 1 share info strings)

    Note: see cifsrap2.txt section5, page 10.

    0 for shi1_type indicates a Disk.
    1 for shi1_type indicates a Print Queue.
    2 for shi1_type indicates a Device.
    3 for shi1_type indicates an IPC pipe.
    0x8000 0000 (top bit set in shi1_type) indicates a hidden share.
    VOID*

    shi1_netname - pointer to net name

    UINT32

    shi1_type - type of share. 0 - undocumented.

    VOID*

    shi1_remark - pointer to comment.

    SH_INFO_1_STR (level 1 share info strings)

    UNISTR2

    shi1_netname - unicode string of net name

    UNISTR2

    shi1_remark - unicode string of comment.

    SHARE_INFO_1_CTR

    share container with 0 entries:

    UINT32

    0 - EntriesRead

    UINT32

    0 - Buffer

    share container with > 0 entries:

    UINT32

    EntriesRead

    UINT32

    non-zero - Buffer

    UINT32

    EntriesRead

    SH_INFO_1_PTR[EntriesRead]

    share entry pointers

    SH_INFO_1_STR[EntriesRead]

    share entry strings

    UINT8[]

    padding to get unicode string 4-byte aligned with start of the SMB header.

    UINT32

    EntriesRead

    UINT32

    0 - padding

    SERVER_INFO_101

    Note: see cifs6.txt section 6.4 - the fields described therein will be of assistance here. for example, the type listed below is the same as fServerType, which is described in 6.4.1.

    SV_TYPE_WORKSTATION

    0x00000001 All workstations

    SV_TYPE_SERVER

    0x00000002 All servers

    SV_TYPE_SQLSERVER

    0x00000004 Any server running with SQL server

    SV_TYPE_DOMAIN_CTRL

    0x00000008 Primary domain controller

    SV_TYPE_DOMAIN_BAKCTRL

    0x00000010 Backup domain controller

    SV_TYPE_TIME_SOURCE

    0x00000020 Server running the timesource service

    SV_TYPE_AFP

    0x00000040 Apple File Protocol servers

    SV_TYPE_NOVELL

    0x00000080 Novell servers

    SV_TYPE_DOMAIN_MEMBER

    0x00000100 Domain Member

    SV_TYPE_PRINTQ_SERVER

    0x00000200 Server sharing print queue

    SV_TYPE_DIALIN_SERVER

    0x00000400 Server running dialin service.

    SV_TYPE_XENIX_SERVER

    0x00000800 Xenix server

    SV_TYPE_NT

    0x00001000 NT server

    SV_TYPE_WFW

    0x00002000 Server running Windows for

    SV_TYPE_SERVER_NT

    0x00008000 Windows NT non DC server

    SV_TYPE_POTENTIAL_BROWSER

    0x00010000 Server that can run the browser service

    SV_TYPE_BACKUP_BROWSER

    0x00020000 Backup browser server

    SV_TYPE_MASTER_BROWSER

    0x00040000 Master browser server

    SV_TYPE_DOMAIN_MASTER

    0x00080000 Domain Master Browser server

    SV_TYPE_LOCAL_LIST_ONLY

    0x40000000 Enumerate only entries marked "local"

    SV_TYPE_DOMAIN_ENUM

    0x80000000 Enumerate Domains. The pszServer and pszDomain parameters must be NULL.

    UINT32

    500 - platform_id

    VOID*

    pointer to name

    UINT32

    5 - major version

    UINT32

    4 - minor version

    UINT32

    type (SV_TYPE_... bit field)

    VOID*

    pointer to comment

    UNISTR2

    sv101_name - unicode string of server name

    UNISTR2

    sv_101_comment - unicode string of server comment.

    UINT8[]

    padding to get unicode string 4-byte aligned with start of the SMB header.

    MSRPC over Transact Named Pipe

    For details on the SMB Transact Named Pipe, see cifs6.txt

    MSRPC Pipes

    The MSRPC is conducted over an SMB Transact Pipe with a name of \PIPE\. You must first obtain a 16 bit file handle, by sending a SMBopenX with the pipe name \PIPE\srvsvc for @@ -1268,11 +1268,11 @@ listed below:

             initial SMBopenX request:         RPC API command 0x26 params:
             "\\PIPE\\lsarpc"                  0x65 0x63; 0x72 0x70; 0x44 0x65;
             "\\PIPE\\srvsvc"                  0x73 0x76; 0x4E 0x00; 0x5C 0x43;
    -

    Header

    [section to be rewritten, following receipt of work by Duncan Stansfield]

    Interesting note: if you set packed data representation to 0x0100 0000 -then all 4-byte and 2-byte word ordering is turned around!

    The start of each of the NTLSA and NETLOGON named pipes begins with:

    offset: 00

    Variable type: UINT8

    Variable data: 5 - RPC major version

    offset: 01

    Variable type: UINT8

    Variable data: 0 - RPC minor version

    offset: 02

    Variable type: UINT8

    Variable data: 2 - RPC response packet

    offset: 03

    Variable type: UINT8

    Variable data: 3 - (FirstFrag bit-wise or with LastFrag)

    offset: 04

    Variable type: UINT32

    Variable data: 0x1000 0000 - packed data representation

    offset: 08

    Variable type: UINT16

    Variable data: fragment length - data size (bytes) inc header and tail.

    offset: 0A

    Variable type: UINT16

    Variable data: 0 - authentication length

    offset: 0C

    Variable type: UINT32

    Variable data: call identifier. matches 12th UINT32 of incoming RPC data.

    offset: 10

    Variable type: UINT32

    Variable data: allocation hint - data size (bytes) minus header and tail.

    offset: 14

    Variable type: UINT16

    Variable data: 0 - presentation context identifier

    offset: 16

    Variable type: UINT8

    Variable data: 0 - cancel count

    offset: 17

    Variable type: UINT8

    Variable data: in replies: 0 - reserved; in requests: opnum - see #defines.

    offset: 18

    Variable type: ......

    Variable data: start of data (goes on for allocation_hint bytes)

    RPC_Packet for request, response, bind and bind acknowledgement

    UINT8 versionmaj

    reply same as request (0x05)

    UINT8 versionmin

    reply same as request (0x00)

    UINT8 type

    one of the MSRPC_Type enums

    UINT8 flags

    reply same as request (0x00 for Bind, 0x03 for Request)

    UINT32 representation

    reply same as request (0x00000010)

    UINT16 fraglength

    the length of the data section of the SMB trans packet

    UINT16 authlength

    UINT32 callid

    call identifier. (e.g. 0x00149594)

    * stub USE TvPacket

    the remainder of the packet depending on the "type"

    Interface identification

    the interfaces are numbered. as yet I haven't seen more than one interface used on the same pipe name srvsvc

    +

    Header

    [section to be rewritten, following receipt of work by Duncan Stansfield]

    Interesting note: if you set packed data representation to 0x0100 0000 +then all 4-byte and 2-byte word ordering is turned around!

    The start of each of the NTLSA and NETLOGON named pipes begins with:

    offset: 00

    Variable type: UINT8

    Variable data: 5 - RPC major version

    offset: 01

    Variable type: UINT8

    Variable data: 0 - RPC minor version

    offset: 02

    Variable type: UINT8

    Variable data: 2 - RPC response packet

    offset: 03

    Variable type: UINT8

    Variable data: 3 - (FirstFrag bit-wise or with LastFrag)

    offset: 04

    Variable type: UINT32

    Variable data: 0x1000 0000 - packed data representation

    offset: 08

    Variable type: UINT16

    Variable data: fragment length - data size (bytes) inc header and tail.

    offset: 0A

    Variable type: UINT16

    Variable data: 0 - authentication length

    offset: 0C

    Variable type: UINT32

    Variable data: call identifier. matches 12th UINT32 of incoming RPC data.

    offset: 10

    Variable type: UINT32

    Variable data: allocation hint - data size (bytes) minus header and tail.

    offset: 14

    Variable type: UINT16

    Variable data: 0 - presentation context identifier

    offset: 16

    Variable type: UINT8

    Variable data: 0 - cancel count

    offset: 17

    Variable type: UINT8

    Variable data: in replies: 0 - reserved; in requests: opnum - see #defines.

    offset: 18

    Variable type: ......

    Variable data: start of data (goes on for allocation_hint bytes)

    RPC_Packet for request, response, bind and bind acknowledgement

    UINT8 versionmaj

    reply same as request (0x05)

    UINT8 versionmin

    reply same as request (0x00)

    UINT8 type

    one of the MSRPC_Type enums

    UINT8 flags

    reply same as request (0x00 for Bind, 0x03 for Request)

    UINT32 representation

    reply same as request (0x00000010)

    UINT16 fraglength

    the length of the data section of the SMB trans packet

    UINT16 authlength

    UINT32 callid

    call identifier. (e.g. 0x00149594)

    * stub USE TvPacket

    the remainder of the packet depending on the "type"

    Interface identification

    the interfaces are numbered. as yet I haven't seen more than one interface used on the same pipe name srvsvc

     abstract (0x4B324FC8, 0x01D31670, 0x475A7812, 0x88E16EBF, 0x00000003)
     transfer (0x8A885D04, 0x11C91CEB, 0x0008E89F, 0x6048102B, 0x00000002)
    -

    RPC_Iface RW

    UINT8 byte[16]

    16 bytes of number

    UINT32 version

    the interface number

    RPC_ReqBind RW

    the remainder of the packet after the header if "type" was Bind in the response header, "type" should be BindAck

    UINT16 maxtsize

    maximum transmission fragment size (0x1630)

    UINT16 maxrsize

    max receive fragment size (0x1630)

    UINT32 assocgid

    associated group id (0x0)

    UINT32 numelements

    the number of elements (0x1)

    UINT16 contextid

    presentation context identifier (0x0)

    UINT8 numsyntaxes

    the number of syntaxes (has always been 1?)(0x1)

    UINT8[]

    4-byte alignment padding, against SMB header

    * abstractint USE RPC_Iface

    num and vers. of interface client is using

    * transferint USE RPC_Iface

    num and vers. of interface to use for replies

    RPC_Address RW

    UINT16 length

    length of the string including null terminator

    * port USE string

    the string above in single byte, null terminated form

    RPC_ResBind RW

    the response to place after the header in the reply packet

    UINT16 maxtsize

    same as request

    UINT16 maxrsize

    same as request

    UINT32 assocgid

    zero

    * secondaddr USE RPC_Address

    the address string, as described earlier

    UINT8[]

    4-byte alignment padding, against SMB header

    UINT8 numresults

    the number of results (0x01)

    UINT8[]

    4-byte alignment padding, against SMB header

    UINT16 result

    result (0x00 = accept)

    UINT16 reason

    reason (0x00 = no reason specified)

    * transfersyntax USE RPC_Iface

    the transfer syntax from the request

    RPC_ReqNorm RW

    the remainder of the packet after the header for every other other request

    UINT32 allochint

    the size of the stub data in bytes

    UINT16 prescontext

    presentation context identifier (0x0)

    UINT16 opnum

    operation number (0x15)

    * stub USE TvPacket

    a packet dependent on the pipe name (probably the interface) and the op number)

    RPC_ResNorm RW

    UINT32 allochint

    # size of the stub data in bytes

    UINT16 prescontext

    # presentation context identifier (same as request)

    UINT8 cancelcount

    # cancel count? (0x0)

    UINT8 reserved

    # 0 - one byte padding

    * stub USE TvPacket

    # the remainder of the reply

    Tail

    The end of each of the NTLSA and NETLOGON named pipes ends with:

    ......

    end of data

    UINT32

    return code

    RPC Bind / Bind Ack

    +

    RPC_Iface RW

    UINT8 byte[16]

    16 bytes of number

    UINT32 version

    the interface number

    RPC_ReqBind RW

    the remainder of the packet after the header if "type" was Bind in the response header, "type" should be BindAck

    UINT16 maxtsize

    maximum transmission fragment size (0x1630)

    UINT16 maxrsize

    max receive fragment size (0x1630)

    UINT32 assocgid

    associated group id (0x0)

    UINT32 numelements

    the number of elements (0x1)

    UINT16 contextid

    presentation context identifier (0x0)

    UINT8 numsyntaxes

    the number of syntaxes (has always been 1?)(0x1)

    UINT8[]

    4-byte alignment padding, against SMB header

    * abstractint USE RPC_Iface

    num and vers. of interface client is using

    * transferint USE RPC_Iface

    num and vers. of interface to use for replies

    RPC_Address RW

    UINT16 length

    length of the string including null terminator

    * port USE string

    the string above in single byte, null terminated form

    RPC_ResBind RW

    the response to place after the header in the reply packet

    UINT16 maxtsize

    same as request

    UINT16 maxrsize

    same as request

    UINT32 assocgid

    zero

    * secondaddr USE RPC_Address

    the address string, as described earlier

    UINT8[]

    4-byte alignment padding, against SMB header

    UINT8 numresults

    the number of results (0x01)

    UINT8[]

    4-byte alignment padding, against SMB header

    UINT16 result

    result (0x00 = accept)

    UINT16 reason

    reason (0x00 = no reason specified)

    * transfersyntax USE RPC_Iface

    the transfer syntax from the request

    RPC_ReqNorm RW

    the remainder of the packet after the header for every other other request

    UINT32 allochint

    the size of the stub data in bytes

    UINT16 prescontext

    presentation context identifier (0x0)

    UINT16 opnum

    operation number (0x15)

    * stub USE TvPacket

    a packet dependent on the pipe name (probably the interface) and the op number)

    RPC_ResNorm RW

    UINT32 allochint

    # size of the stub data in bytes

    UINT16 prescontext

    # presentation context identifier (same as request)

    UINT8 cancelcount

    # cancel count? (0x0)

    UINT8 reserved

    # 0 - one byte padding

    * stub USE TvPacket

    # the remainder of the reply

    Tail

    The end of each of the NTLSA and NETLOGON named pipes ends with:

    ......

    end of data

    UINT32

    return code

    RPC Bind / Bind Ack

    RPC Binds are the process of associating an RPC pipe (e.g \PIPE\lsarpc) with a "transfer syntax" (see RPC_Iface structure). The purpose for doing this is unknown. @@ -1280,7 +1280,7 @@ this is unknown. returned by the SMBopenX Transact response.

    Note: The RPC_ResBind members maxtsize, maxrsize and assocgid are the same in the response as the same members in the RPC_ReqBind. The RPC_ResBind member transfersyntax is the same in the response as the

    Note: The RPC_ResBind response member secondaddr contains the name of what is presumed to be the service behind the RPC pipe. The - mapping identified so far is:

    initial SMBopenX request:

    RPC_ResBind response:

    "\\PIPE\\srvsvc"

    "\\PIPE\\ntsvcs"

    "\\PIPE\\samr"

    "\\PIPE\\lsass"

    "\\PIPE\\lsarpc"

    "\\PIPE\\lsass"

    "\\PIPE\\wkssvc"

    "\\PIPE\\wksvcs"

    "\\PIPE\\NETLOGON"

    "\\PIPE\\NETLOGON"

    Note: The RPC_Packet fraglength member in both the Bind Request and Bind Acknowledgment must contain the length of the entire RPC data, including the RPC_Packet header.

    Request:

    RPC_Packet
    RPC_ReqBind

    Response:

    RPC_Packet
    RPC_ResBind

    NTLSA Transact Named Pipe

    The sequence of actions taken on this pipe are:

    Establish a connection to the IPC$ share (SMBtconX). use encrypted passwords.
    Open an RPC Pipe with the name "\\PIPE\\lsarpc". Store the file handle.
    Using the file handle, send a Set Named Pipe Handle state to 0x4300.
    Send an LSA Open Policy request. Store the Policy Handle.
    Using the Policy Handle, send LSA Query Info Policy requests, etc.
    Using the Policy Handle, send an LSA Close.
    Close the IPC$ share.

    Defines for this pipe, identifying the query are:

    LSA Open Policy:

    0x2c

    LSA Query Info Policy:

    0x07

    LSA Enumerate Trusted Domains:

    0x0d

    LSA Open Secret:

    0xff

    LSA Lookup SIDs:

    0xfe

    LSA Lookup Names:

    0xfd

    LSA Close:

    0x00

    LSA Open Policy

    Note: The policy handle can be anything you like.

    Request

    VOID*

    buffer pointer

    UNISTR2

    server name - unicode string starting with two '\'s

    OBJ_ATTR

    object attributes

    UINT32

    1 - desired access

    Response

    POL_HND

    LSA policy handle

    return

    0 - indicates success

    LSA Query Info Policy

    Note: The info class in response must be the same as that in the request.

    Request

    POL_HND

    LSA policy handle

    UINT16

    info class (also a policy handle?)

    Response

    VOID*

    undocumented buffer pointer

    UINT16

    info class (same as info class in request).

    +	mapping identified so far is:

    initial SMBopenX request:

    RPC_ResBind response:

    "\\PIPE\\srvsvc"

    "\\PIPE\\ntsvcs"

    "\\PIPE\\samr"

    "\\PIPE\\lsass"

    "\\PIPE\\lsarpc"

    "\\PIPE\\lsass"

    "\\PIPE\\wkssvc"

    "\\PIPE\\wksvcs"

    "\\PIPE\\NETLOGON"

    "\\PIPE\\NETLOGON"

    Note: The RPC_Packet fraglength member in both the Bind Request and Bind Acknowledgment must contain the length of the entire RPC data, including the RPC_Packet header.

    Request:

    RPC_Packet
    RPC_ReqBind

    Response:

    RPC_Packet
    RPC_ResBind

    NTLSA Transact Named Pipe

    The sequence of actions taken on this pipe are:

    Establish a connection to the IPC$ share (SMBtconX). use encrypted passwords.
    Open an RPC Pipe with the name "\\PIPE\\lsarpc". Store the file handle.
    Using the file handle, send a Set Named Pipe Handle state to 0x4300.
    Send an LSA Open Policy request. Store the Policy Handle.
    Using the Policy Handle, send LSA Query Info Policy requests, etc.
    Using the Policy Handle, send an LSA Close.
    Close the IPC$ share.

    Defines for this pipe, identifying the query are:

    LSA Open Policy:

    0x2c

    LSA Query Info Policy:

    0x07

    LSA Enumerate Trusted Domains:

    0x0d

    LSA Open Secret:

    0xff

    LSA Lookup SIDs:

    0xfe

    LSA Lookup Names:

    0xfd

    LSA Close:

    0x00

    LSA Open Policy

    Note: The policy handle can be anything you like.

    Request

    VOID*

    buffer pointer

    UNISTR2

    server name - unicode string starting with two '\'s

    OBJ_ATTR

    object attributes

    UINT32

    1 - desired access

    Response

    POL_HND

    LSA policy handle

    return

    0 - indicates success

    LSA Query Info Policy

    Note: The info class in response must be the same as that in the request.

    Request

    POL_HND

    LSA policy handle

    UINT16

    info class (also a policy handle?)

    Response

    VOID*

    undocumented buffer pointer

    UINT16

    info class (same as info class in request).

     switch (info class)
     case 3:
     case 5:
    @@ -1289,11 +1289,11 @@ DOM_INFO domain info, levels 3 and 5 (are the same).
     }
     
     return    0 - indicates success
    -

    LSA Enumerate Trusted Domains

    Request

    no extra data

    Response

    UINT32

    0 - enumeration context

    UINT32

    0 - entries read

    UINT32

    0 - trust information

    return

    0x8000 001a - "no trusted domains" success code

    LSA Open Secret

    Request

    no extra data

    Response

    UINT32

    0 - undocumented

    UINT32

    0 - undocumented

    UINT32

    0 - undocumented

    UINT32

    0 - undocumented

    UINT32

    0 - undocumented

    return 0x0C00 0034 - "no such secret" success code

    LSA Close

    Request

    POL_HND

    policy handle to be closed

    Response

    POL_HND

    0s - closed policy handle (all zeros)

    return 0 - indicates success

    LSA Lookup SIDS

    Note: num_entries in response must be same as num_entries in request.

    Request

    POL_HND

    LSA policy handle

    UINT32

    num_entries

    VOID*

    undocumented domain SID buffer pointer

    VOID*

    undocumented domain name buffer pointer

    VOID*[num_entries] undocumented domain SID pointers to be looked up. -

    DOM_SID[num_entries] domain SIDs to be looked up.

    char[16]

    completely undocumented 16 bytes.

    Response

    DOM_REF

    domain reference response

    UINT32

    num_entries (listed above)

    VOID*

    undocumented buffer pointer

    UINT32

    num_entries (listed above)

    DOM_SID2[num_entries]

    domain SIDs (from Request, listed above).

    UINT32

    num_entries (listed above)

    return 0 - indicates success

    LSA Lookup Names

    Note: num_entries in response must be same as num_entries in request.

    Request

    POL_HND

    LSA policy handle

    UINT32

    num_entries

    UINT32

    num_entries

    VOID*

    undocumented domain SID buffer pointer

    VOID*

    undocumented domain name buffer pointer

    NAME[num_entries]

    names to be looked up.

    char[]

    undocumented bytes - falsely translated SID structure?

    Response

    DOM_REF

    domain reference response

    UINT32

    num_entries (listed above)

    VOID*

    undocumented buffer pointer

    UINT32

    num_entries (listed above)

    DOM_RID[num_entries]

    domain SIDs (from Request, listed above).

    UINT32

    num_entries (listed above)

    return 0 - indicates success

    NETLOGON rpc Transact Named Pipe

    The sequence of actions taken on this pipe are:

    tablish a connection to the IPC$ share (SMBtconX). use encrypted passwords.
    en an RPC Pipe with the name "\\PIPE\\NETLOGON". Store the file handle.
    ing the file handle, send a Set Named Pipe Handle state to 0x4300.
    eate Client Challenge. Send LSA Request Challenge. Store Server Challenge.
    lculate Session Key. Send an LSA Auth 2 Challenge. Store Auth2 Challenge.
    lc/Verify Client Creds. Send LSA Srv PW Set. Calc/Verify Server Creds.
    lc/Verify Client Creds. Send LSA SAM Logon . Calc/Verify Server Creds.
    lc/Verify Client Creds. Send LSA SAM Logoff. Calc/Verify Server Creds.
    ose the IPC$ share.

    Defines for this pipe, identifying the query are

    LSA Request Challenge:

    0x04

    LSA Server Password Set:

    0x06

    LSA SAM Logon:

    0x02

    LSA SAM Logoff:

    0x03

    LSA Auth 2:

    0x0f

    LSA Logon Control:

    0x0e

    LSA Request Challenge

    Note: logon server name starts with two '\' characters and is upper case.

    Note: logon client is the machine, not the user.

    Note: the initial LanManager password hash, against which the challenge is issued, is the machine name itself (lower case). there will becalls issued (LSA Server Password Set) which will change this, later. refusing these calls allows you to always deal with the same password (i.e the LM# of the machine name in lower case).

    Request

    VOID*

    undocumented buffer pointer

    UNISTR2

    logon server unicode string

    UNISTR2

    logon client unicode string

    char[8]

    client challenge

    Response

    char[8]

    server challenge

    return 0 - indicates success

    LSA Authenticate 2

    Note: in between request and response, calculate the client credentials, and check them against the client-calculated credentials (this process uses the previously received client credentials).

    Note: neg_flags in the response is the same as that in the request.

    Note: you must take a copy of the client-calculated credentials received here, because they will be used in subsequent authentication packets.

    Request

    LOG_INFO

    client identification info

    char[8]

    client-calculated credentials

    UINT8[]

    padding to 4-byte align with start of SMB header.

    UINT32

    neg_flags - negotiated flags (usual value is 0x0000 01ff)

    Response

    char[8]

    server credentials.

    UINT32

    neg_flags - same as neg_flags in request.

    return 0 - indicates success. failure value unknown.

    LSA Server Password Set

    Note: the new password is suspected to be a DES encryption using the old password to generate the key.

    Note: in between request and response, calculate the client credentials, and check them against the client-calculated credentials (this process uses the previously received client credentials).

    Note: the server credentials are constructed from the client-calculated credentials and the client time + 1 second.

    Note: you must take a copy of the client-calculated credentials received here, because they will be used in subsequent authentication packets.

    Request

    CLNT_INFO

    client identification/authentication info

    char[]

    new password - undocumented.

    Response

    CREDS

    server credentials. server time stamp appears to be ignored.

    return 0 - indicates success; 0xC000 006a indicates failure

    LSA SAM Logon

    +

    LSA Enumerate Trusted Domains

    Request

    no extra data

    Response

    UINT32

    0 - enumeration context

    UINT32

    0 - entries read

    UINT32

    0 - trust information

    return

    0x8000 001a - "no trusted domains" success code

    LSA Open Secret

    Request

    no extra data

    Response

    UINT32

    0 - undocumented

    UINT32

    0 - undocumented

    UINT32

    0 - undocumented

    UINT32

    0 - undocumented

    UINT32

    0 - undocumented

    return 0x0C00 0034 - "no such secret" success code

    LSA Close

    Request

    POL_HND

    policy handle to be closed

    Response

    POL_HND

    0s - closed policy handle (all zeros)

    return 0 - indicates success

    LSA Lookup SIDS

    Note: num_entries in response must be same as num_entries in request.

    Request

    POL_HND

    LSA policy handle

    UINT32

    num_entries

    VOID*

    undocumented domain SID buffer pointer

    VOID*

    undocumented domain name buffer pointer

    VOID*[num_entries] undocumented domain SID pointers to be looked up. +

    DOM_SID[num_entries] domain SIDs to be looked up.

    char[16]

    completely undocumented 16 bytes.

    Response

    DOM_REF

    domain reference response

    UINT32

    num_entries (listed above)

    VOID*

    undocumented buffer pointer

    UINT32

    num_entries (listed above)

    DOM_SID2[num_entries]

    domain SIDs (from Request, listed above).

    UINT32

    num_entries (listed above)

    return 0 - indicates success

    LSA Lookup Names

    Note: num_entries in response must be same as num_entries in request.

    Request

    POL_HND

    LSA policy handle

    UINT32

    num_entries

    UINT32

    num_entries

    VOID*

    undocumented domain SID buffer pointer

    VOID*

    undocumented domain name buffer pointer

    NAME[num_entries]

    names to be looked up.

    char[]

    undocumented bytes - falsely translated SID structure?

    Response

    DOM_REF

    domain reference response

    UINT32

    num_entries (listed above)

    VOID*

    undocumented buffer pointer

    UINT32

    num_entries (listed above)

    DOM_RID[num_entries]

    domain SIDs (from Request, listed above).

    UINT32

    num_entries (listed above)

    return 0 - indicates success

    NETLOGON rpc Transact Named Pipe

    The sequence of actions taken on this pipe are:

    tablish a connection to the IPC$ share (SMBtconX). use encrypted passwords.
    en an RPC Pipe with the name "\\PIPE\\NETLOGON". Store the file handle.
    ing the file handle, send a Set Named Pipe Handle state to 0x4300.
    eate Client Challenge. Send LSA Request Challenge. Store Server Challenge.
    lculate Session Key. Send an LSA Auth 2 Challenge. Store Auth2 Challenge.
    lc/Verify Client Creds. Send LSA Srv PW Set. Calc/Verify Server Creds.
    lc/Verify Client Creds. Send LSA SAM Logon . Calc/Verify Server Creds.
    lc/Verify Client Creds. Send LSA SAM Logoff. Calc/Verify Server Creds.
    ose the IPC$ share.

    Defines for this pipe, identifying the query are

    LSA Request Challenge:

    0x04

    LSA Server Password Set:

    0x06

    LSA SAM Logon:

    0x02

    LSA SAM Logoff:

    0x03

    LSA Auth 2:

    0x0f

    LSA Logon Control:

    0x0e

    LSA Request Challenge

    Note: logon server name starts with two '\' characters and is upper case.

    Note: logon client is the machine, not the user.

    Note: the initial LanManager password hash, against which the challenge is issued, is the machine name itself (lower case). there will becalls issued (LSA Server Password Set) which will change this, later. refusing these calls allows you to always deal with the same password (i.e the LM# of the machine name in lower case).

    Request

    VOID*

    undocumented buffer pointer

    UNISTR2

    logon server unicode string

    UNISTR2

    logon client unicode string

    char[8]

    client challenge

    Response

    char[8]

    server challenge

    return 0 - indicates success

    LSA Authenticate 2

    Note: in between request and response, calculate the client credentials, and check them against the client-calculated credentials (this process uses the previously received client credentials).

    Note: neg_flags in the response is the same as that in the request.

    Note: you must take a copy of the client-calculated credentials received here, because they will be used in subsequent authentication packets.

    Request

    LOG_INFO

    client identification info

    char[8]

    client-calculated credentials

    UINT8[]

    padding to 4-byte align with start of SMB header.

    UINT32

    neg_flags - negotiated flags (usual value is 0x0000 01ff)

    Response

    char[8]

    server credentials.

    UINT32

    neg_flags - same as neg_flags in request.

    return 0 - indicates success. failure value unknown.

    LSA Server Password Set

    Note: the new password is suspected to be a DES encryption using the old password to generate the key.

    Note: in between request and response, calculate the client credentials, and check them against the client-calculated credentials (this process uses the previously received client credentials).

    Note: the server credentials are constructed from the client-calculated credentials and the client time + 1 second.

    Note: you must take a copy of the client-calculated credentials received here, because they will be used in subsequent authentication packets.

    Request

    CLNT_INFO

    client identification/authentication info

    char[]

    new password - undocumented.

    Response

    CREDS

    server credentials. server time stamp appears to be ignored.

    return 0 - indicates success; 0xC000 006a indicates failure

    LSA SAM Logon

    Note: valid_user is True iff the username and password hash are valid for the requested domain. -

    Request

    SAM_INFO

    sam_id structure

    Response

    VOID*

    undocumented buffer pointer

    CREDS

    server credentials. server time stamp appears to be ignored.

    +

    Request

    SAM_INFO

    sam_id structure

    Response

    VOID*

    undocumented buffer pointer

    CREDS

    server credentials. server time stamp appears to be ignored.

     if (valid_user)
     {
     	UINT16      3 - switch value indicating USER_INFO structure.
    @@ -1313,16 +1313,16 @@ else
     
         return    0xC000 0064 - NT_STATUS_NO_SUCH_USER.
     }
    -

    LSA SAM Logoff

    +

    LSA SAM Logoff

    Note: presumably, the SAM_INFO structure is validated, and a (currently undocumented) error code returned if the Logoff is invalid. -

    Request

    SAM_INFO

    sam_id structure

    Response

    VOID*

    undocumented buffer pointer

    CREDS

    server credentials. server time stamp appears to be ignored.

    return 0 - indicates success. undocumented failure indication.

    \\MAILSLOT\NET\NTLOGON

    +

    Request

    SAM_INFO

    sam_id structure

    Response

    VOID*

    undocumented buffer pointer

    CREDS

    server credentials. server time stamp appears to be ignored.

    return 0 - indicates success. undocumented failure indication.

    \\MAILSLOT\NET\NTLOGON

    Note: mailslots will contain a response mailslot, to which the response should be sent. the target NetBIOS name is REQUEST_NAME<20>, where REQUEST_NAME is the name of the machine that sent the request. -

    Query for PDC

    Note: NTversion, LMNTtoken, LM20token in response are the same as those given in the request.

    Request

    UINT16

    0x0007 - Query for PDC

    STR

    machine name

    STR

    response mailslot

    UINT8[]

    padding to 2-byte align with start of mailslot.

    UNISTR

    machine name

    UINT32

    NTversion

    UINT16

    LMNTtoken

    UINT16

    LM20token

    Response

    UINT16

    0x000A - Respose to Query for PDC

    STR

    machine name (in uppercase)

    UINT8[]

    padding to 2-byte align with start of mailslot.

    UNISTR

    machine name

    UNISTR

    domain name

    UINT32

    NTversion (same as received in request)

    UINT16

    LMNTtoken (same as received in request)

    UINT16

    LM20token (same as received in request)

    SAM Logon

    Note: machine name in response is preceded by two '\' characters.

    Note: NTversion, LMNTtoken, LM20token in response are the same as those given in the request.

    Note: user name in the response is presumably the same as that in the request.

    Request

    UINT16

    0x0012 - SAM Logon

    UINT16

    request count

    UNISTR

    machine name

    UNISTR

    user name

    STR

    response mailslot

    UINT32

    alloweable account

    UINT32

    domain SID size

    char[sid_size]

    domain SID, of sid_size bytes.

    UINT8[]

    ???? padding to 4? 2? -byte align with start of mailslot.

    UINT32

    NTversion

    UINT16

    LMNTtoken

    UINT16

    LM20token

    Response

    UINT16

    0x0013 - Response to SAM Logon

    UNISTR

    machine name

    UNISTR

    user name - workstation trust account

    UNISTR

    domain name

    UINT32

    NTversion

    UINT16

    LMNTtoken

    UINT16

    LM20token

    SRVSVC Transact Named Pipe

    Defines for this pipe, identifying the query are:

    Net Share Enum

    0x0f

    Net Server Get Info

    0x15

    Net Share Enum

    Note: share level and switch value in the response are presumably the same as those in the request.

    Note: cifsrap2.txt (section 5) may be of limited assistance here.

    Request

    VOID*

    pointer (to server name?)

    UNISTR2

    server name

    UINT8[]

    padding to get unicode string 4-byte aligned with the start of the SMB header.

    UINT32

    share level

    UINT32

    switch value

    VOID*

    pointer to SHARE_INFO_1_CTR

    SHARE_INFO_1_CTR

    share info with 0 entries

    UINT32

    preferred maximum length (0xffff ffff)

    Response

    UINT32

    share level

    UINT32

    switch value

    VOID*

    pointer to SHARE_INFO_1_CTR

    SHARE_INFO_1_CTR

    share info (only added if share info ptr is non-zero)

    return 0 - indicates success

    Net Server Get Info

    Note: level is the same value as in the request.

    Request

    UNISTR2

    server name

    UINT32

    switch level

    Response

    UINT32

    switch level

    VOID*

    pointer to SERVER_INFO_101

    SERVER_INFO_101

    server info (only added if server info ptr is non-zero)

    return 0 - indicates success

    Cryptographic side of NT Domain Authentication

    Definitions

    Add(A1,A2)

    Intel byte ordered addition of corresponding 4 byte words in arrays A1 and A2

    E(K,D)

    DES ECB encryption of 8 byte data D using 7 byte key K

    lmowf()

    Lan man hash

    ntowf()

    NT hash

    PW

    md4(machine_password) == md4(lsadump $machine.acc) == +

    Query for PDC

    Note: NTversion, LMNTtoken, LM20token in response are the same as those given in the request.

    Request

    UINT16

    0x0007 - Query for PDC

    STR

    machine name

    STR

    response mailslot

    UINT8[]

    padding to 2-byte align with start of mailslot.

    UNISTR

    machine name

    UINT32

    NTversion

    UINT16

    LMNTtoken

    UINT16

    LM20token

    Response

    UINT16

    0x000A - Respose to Query for PDC

    STR

    machine name (in uppercase)

    UINT8[]

    padding to 2-byte align with start of mailslot.

    UNISTR

    machine name

    UNISTR

    domain name

    UINT32

    NTversion (same as received in request)

    UINT16

    LMNTtoken (same as received in request)

    UINT16

    LM20token (same as received in request)

    SAM Logon

    Note: machine name in response is preceded by two '\' characters.

    Note: NTversion, LMNTtoken, LM20token in response are the same as those given in the request.

    Note: user name in the response is presumably the same as that in the request.

    Request

    UINT16

    0x0012 - SAM Logon

    UINT16

    request count

    UNISTR

    machine name

    UNISTR

    user name

    STR

    response mailslot

    UINT32

    alloweable account

    UINT32

    domain SID size

    char[sid_size]

    domain SID, of sid_size bytes.

    UINT8[]

    ???? padding to 4? 2? -byte align with start of mailslot.

    UINT32

    NTversion

    UINT16

    LMNTtoken

    UINT16

    LM20token

    Response

    UINT16

    0x0013 - Response to SAM Logon

    UNISTR

    machine name

    UNISTR

    user name - workstation trust account

    UNISTR

    domain name

    UINT32

    NTversion

    UINT16

    LMNTtoken

    UINT16

    LM20token

    SRVSVC Transact Named Pipe

    Defines for this pipe, identifying the query are:

    Net Share Enum

    0x0f

    Net Server Get Info

    0x15

    Net Share Enum

    Note: share level and switch value in the response are presumably the same as those in the request.

    Note: cifsrap2.txt (section 5) may be of limited assistance here.

    Request

    VOID*

    pointer (to server name?)

    UNISTR2

    server name

    UINT8[]

    padding to get unicode string 4-byte aligned with the start of the SMB header.

    UINT32

    share level

    UINT32

    switch value

    VOID*

    pointer to SHARE_INFO_1_CTR

    SHARE_INFO_1_CTR

    share info with 0 entries

    UINT32

    preferred maximum length (0xffff ffff)

    Response

    UINT32

    share level

    UINT32

    switch value

    VOID*

    pointer to SHARE_INFO_1_CTR

    SHARE_INFO_1_CTR

    share info (only added if share info ptr is non-zero)

    return 0 - indicates success

    Net Server Get Info

    Note: level is the same value as in the request.

    Request

    UNISTR2

    server name

    UINT32

    switch level

    Response

    UINT32

    switch level

    VOID*

    pointer to SERVER_INFO_101

    SERVER_INFO_101

    server info (only added if server info ptr is non-zero)

    return 0 - indicates success

    Cryptographic side of NT Domain Authentication

    Definitions

    Add(A1,A2)

    Intel byte ordered addition of corresponding 4 byte words in arrays A1 and A2

    E(K,D)

    DES ECB encryption of 8 byte data D using 7 byte key K

    lmowf()

    Lan man hash

    ntowf()

    NT hash

    PW

    md4(machine_password) == md4(lsadump $machine.acc) == pwdump(machine$) (initially) == md4(lmowf(unicode(machine))) -

    ARC4(K,Lk,D,Ld)

    ARC4 encryption of data D of length Ld with key K of length Lk

    v[m..n(,l)]

    subset of v from bytes m to n, optionally padded with zeroes to length l

    Cred(K,D)

    E(K[7..7,7],E(K[0..6],D)) computes a credential

    Time()

    4 byte current time

    Cc,Cs

    8 byte client and server challenges Rc,Rs: 8 byte client and server credentials

    Protocol

    +

    ARC4(K,Lk,D,Ld)

    ARC4 encryption of data D of length Ld with key K of length Lk

    v[m..n(,l)]

    subset of v from bytes m to n, optionally padded with zeroes to length l

    Cred(K,D)

    E(K[7..7,7],E(K[0..6],D)) computes a credential

    Time()

    4 byte current time

    Cc,Cs

    8 byte client and server challenges Rc,Rs: 8 byte client and server credentials

    Protocol

     C->S ReqChal,Cc
     S->C Cs
     
    @@ -1358,7 +1358,7 @@ S: Ts = Time()
     S->C Cred(Ks,Cred(Ks,Rc+Tc+1)),userinfo(logon script,UID,SIDs,etc)
     C: assert(Rs == Cred(Ks,Cred(Rc+Tc+1))
     C: Rc = Cred(Ks,Rc+Tc+1)
    -

    Comments

    +

    Comments

    On first joining the domain the session key could be computed by anyone listening in on the network as the machine password has a well known value. Until the machine is rebooted it will use this session @@ -1379,30 +1379,30 @@ returned by the server. The password OWFs should NOT be sent over the network reversibly encrypted. They should be sent using ARC4(Ks,md4(owf)) with the server computing the same function using the owf values in the SAM. -

    SIDs and RIDs

    +

    SIDs and RIDs

    SIDs and RIDs are well documented elsewhere.

    A SID is an NT Security ID (see DOM_SID structure). They are of the form:

    revision-NN-SubAuth1-SubAuth2-SubAuth3...
    revision-0xNNNNNNNNNNNN-SubAuth1-SubAuth2-SubAuth3...

    currently, the SID revision is 1. The Sub-Authorities are known as Relative IDs (RIDs). -

    Well-known SIDs

    Universal well-known SIDs

    Null SID

    S-1-0-0

    World

    S-1-1-0

    Local

    S-1-2-0

    Creator Owner ID

    S-1-3-0

    Creator Group ID

    S-1-3-1

    Creator Owner Server ID

    S-1-3-2

    Creator Group Server ID

    S-1-3-3

    (Non-unique IDs)

    S-1-4

    NT well-known SIDs

    NT Authority

    S-1-5

    Dialup

    S-1-5-1

    Network

    S-1-5-2

    Batch

    S-1-5-3

    Interactive

    S-1-5-4

    Service

    S-1-5-6

    AnonymousLogon(aka null logon session)

    S-1-5-7

    Proxy

    S-1-5-8

    ServerLogon(aka domain controller account)

    S-1-5-8

    (Logon IDs)

    S-1-5-5-X-Y

    (NT non-unique IDs)

    S-1-5-0x15-...

    (Built-in domain)

    s-1-5-0x20

    Well-known RIDS

    +

    Well-known SIDs

    Universal well-known SIDs

    Null SID

    S-1-0-0

    World

    S-1-1-0

    Local

    S-1-2-0

    Creator Owner ID

    S-1-3-0

    Creator Group ID

    S-1-3-1

    Creator Owner Server ID

    S-1-3-2

    Creator Group Server ID

    S-1-3-3

    (Non-unique IDs)

    S-1-4

    NT well-known SIDs

    NT Authority

    S-1-5

    Dialup

    S-1-5-1

    Network

    S-1-5-2

    Batch

    S-1-5-3

    Interactive

    S-1-5-4

    Service

    S-1-5-6

    AnonymousLogon(aka null logon session)

    S-1-5-7

    Proxy

    S-1-5-8

    ServerLogon(aka domain controller account)

    S-1-5-8

    (Logon IDs)

    S-1-5-5-X-Y

    (NT non-unique IDs)

    S-1-5-0x15-...

    (Built-in domain)

    s-1-5-0x20

    Well-known RIDS

    A RID is a sub-authority value, as part of either a SID, or in the case of Group RIDs, part of the DOM_GID structure, in the USER_INFO_1 structure, in the LSA SAM Logon response. -

    Well-known RID users

    Groupname: DOMAIN_USER_RID_ADMIN

    ????: 0x0000

    RID: 01F4

    Groupname: DOMAIN_USER_RID_GUEST

    ????: 0x0000

    RID: 01F5

    Well-known RID groups

    Groupname: DOMAIN_GROUP_RID_ADMINS

    ????: 0x0000

    RID: 0200

    Groupname: DOMAIN_GROUP_RID_USERS

    ????: 0x0000

    RID: 0201

    Groupname: DOMAIN_GROUP_RID_GUESTS

    ????: 0x0000

    RID: 0202

    Well-known RID aliases

    Groupname: DOMAIN_ALIAS_RID_ADMINS

    ????: 0x0000

    RID: 0220

    Groupname: DOMAIN_ALIAS_RID_USERS

    ????: 0x0000

    RID: 0221

    Groupname: DOMAIN_ALIAS_RID_GUESTS

    ????: 0x0000

    RID: 0222

    Groupname: DOMAIN_ALIAS_RID_POWER_USERS

    ????: 0x0000

    RID: 0223

    Groupname: DOMAIN_ALIAS_RID_ACCOUNT_OPS

    ????: 0x0000

    RID: 0224

    Groupname: DOMAIN_ALIAS_RID_SYSTEM_OPS

    ????: 0x0000

    RID: 0225

    Groupname: DOMAIN_ALIAS_RID_PRINT_OPS

    ????: 0x0000

    RID: 0226

    Groupname: DOMAIN_ALIAS_RID_BACKUP_OPS

    ????: 0x0000

    RID: 0227

    Groupname: DOMAIN_ALIAS_RID_REPLICATOR

    ????: 0x0000

    RID: 0228

    Chapter 11. Samba Printing Internals

    Gerald Carter

    October 2002

    Table of Contents

    Abstract
    +

    Well-known RID users

    Groupname: DOMAIN_USER_RID_ADMIN

    ????: 0x0000

    RID: 01F4

    Groupname: DOMAIN_USER_RID_GUEST

    ????: 0x0000

    RID: 01F5

    Well-known RID groups

    Groupname: DOMAIN_GROUP_RID_ADMINS

    ????: 0x0000

    RID: 0200

    Groupname: DOMAIN_GROUP_RID_USERS

    ????: 0x0000

    RID: 0201

    Groupname: DOMAIN_GROUP_RID_GUESTS

    ????: 0x0000

    RID: 0202

    Well-known RID aliases

    Groupname: DOMAIN_ALIAS_RID_ADMINS

    ????: 0x0000

    RID: 0220

    Groupname: DOMAIN_ALIAS_RID_USERS

    ????: 0x0000

    RID: 0221

    Groupname: DOMAIN_ALIAS_RID_GUESTS

    ????: 0x0000

    RID: 0222

    Groupname: DOMAIN_ALIAS_RID_POWER_USERS

    ????: 0x0000

    RID: 0223

    Groupname: DOMAIN_ALIAS_RID_ACCOUNT_OPS

    ????: 0x0000

    RID: 0224

    Groupname: DOMAIN_ALIAS_RID_SYSTEM_OPS

    ????: 0x0000

    RID: 0225

    Groupname: DOMAIN_ALIAS_RID_PRINT_OPS

    ????: 0x0000

    RID: 0226

    Groupname: DOMAIN_ALIAS_RID_BACKUP_OPS

    ????: 0x0000

    RID: 0227

    Groupname: DOMAIN_ALIAS_RID_REPLICATOR

    ????: 0x0000

    RID: 0228

    Chapter 11. Samba Printing Internals

    Gerald Carter

    October 2002

    Abstract

    +

    Abstract

    The purpose of this document is to provide some insight into Samba's printing functionality and also to describe the semantics of certain features of Windows client printing. -

    +

    Printing Interface to Various Back ends

    Samba uses a table of function pointers to seven functions. The @@ -1413,7 +1413,7 @@ Currently there are only two printing back end implementations defined.

    • a generic set of functions for working with standard UNIX printing subsystems

    • a set of CUPS specific functions (this is only enabled if - the CUPS libraries were located at compile time).

    + the CUPS libraries were located at compile time).

    Print Queue TDB's

    Samba provides periodic caching of the output from the "lpq command" @@ -1502,11 +1502,11 @@ and the job has the printer's device mode associated with it by default. Only non-default Device Mode are stored with print jobs in the print queue TDB. Otherwise, the Device Mode is obtained from the printer object when the client issues a GetJob(level == 2) request. -

    +

    ChangeID and Client Caching of Printer Information

    [To be filled in later] -

    +

    Windows NT/2K Printer Change Notify

    When working with Windows NT+ clients, it is possible for a @@ -1604,7 +1604,7 @@ handle for notification. Samba currently uses the snum of the printer for this which can break if the list of services has been modified since the notification handle was registered.

  • The size is either (a) the string length in UNICODE for strings, (b) the size in bytes of the security descriptor, or (c) 0 for -data values.

  • Chapter 12. Samba WINS Internals

    Gerald Carter

    October 2002

    Table of Contents

    WINS Failover

    WINS Failover

    +data values.

    Chapter 12. Samba WINS Internals

    Gerald Carter

    October 2002

    Table of Contents

    WINS Failover

    WINS Failover

    The current Samba codebase possesses the capability to use groups of WINS servers that share a common namespace for NetBIOS name registration and resolution. The formal parameter syntax is @@ -1646,7 +1646,7 @@ If a timeout occurs when querying a specific WINS server, that server is marked prevent further timeouts and the next server in the WINS group is contacted. Once marked as dead, Samba will not attempt to contact that server for name registration/resolution queries for a period of 10 minutes. -

    Chapter 13. The Upcoming SAM System

    Andrew Bartlett

    1 October 2002

    Security in the 'new SAM'

    One of the biggest problems with passdb is it's implementation of +

    Chapter 13. The Upcoming SAM System

    Andrew Bartlett

    1 October 2002

    Security in the 'new SAM'

    One of the biggest problems with passdb is it's implementation of 'security'. Access control is on a 'are you root at the moment' basis, and it has no concept of NT ACLs. Things like ldapsam had to add 'magic' 'are you root' checks.

    We took this very seriously when we started work, and the new structure @@ -1706,7 +1706,7 @@ actual data store (like the LDAP server).

    Finally, we have generic get_sec_desc() and set_sec_desc() routines to allow external ACL manipulation. These do lookups based on SID. -

    Standalone from UNIX

    +

    Standalone from UNIX

    One of the primary tenants of the 'new SAM' is that it would not attempt to deal with 'what unix id for that'. This would be left to the 'SMS' (Sid Mapping System') or SID farm, and probably administered via @@ -1716,7 +1716,7 @@ Accounts not preexisting in unix would be served up via winbind.

    This is an *optional* part, and my preferred end-game. We have a fare way to go before things like winbind up to it however. -

    Handles and Races in the new SAM

    +

    Handles and Races in the new SAM

    One of the things that the 'new SAM' work has tried to face is both compatibility with existing code, and a closer alignment to the SAMR interface. I consider SAMR to be a 'primary customer' to the this work, @@ -1741,11 +1741,11 @@ have *really* changed. 'conflicting' updates: Currently we don't deal with this (in passdb or the new sam stuff), but the design is sufficiently flexible to 'deny' a second update. I don't foresee locking records however. -

    Layers

    Application

    +

    Layers

    Application

    This is where smbd, samtest and whatever end-user replacement we have for pdbedit sits. They use only the SAM interface, and do not get 'special knowledge' of what is below them. -

    SAM Interface

    +

    SAM Interface

    This level 'owns' the various handle structures, the get/set routines on those structures and provides the public interface. The application layer may initialize a 'context' to be passed to all interface routines, @@ -1756,7 +1756,7 @@ abstraction to the modules below, and arrange for their initial loading.

    We could possibly add ACL checking at this layer, to avoid discrepancies in implementation modules. -

    SAM Modules

    +

    SAM Modules

    These do not communicate with the application directly, only by setting values in the handles, and receiving requests from the interface. These modules are responsible for translating values from the handle's @@ -1764,13 +1764,13 @@ modules are responsible for translating values from the handle's to 'know' things like it's own domain SID, domain name, and any other state attached to the SAM. Simpler modules may call back to some helper routine. -

    SAM Modules

    Special Module: sam_passdb

    +

    SAM Modules

    Special Module: sam_passdb

    In order for there to be a smooth transition, kai is writing a module that reads existing passdb backends, and translates them into SAM replies. (Also pulling data from the account policy DB etc). We also intend to write a module that does the reverse - gives the SAM a passdb interface. -

    sam_ads

    +

    sam_ads

    This is the first of the SAM modules to be committed to the tree - mainly because I needed to coordinate work with metze (who authored most of it). This module aims to use Samba's libads code to provide an @@ -1782,7 +1782,7 @@ the construction of an Samba AD DC.

    We also intend to construct a Samba 2.2/3.0 compatible ldap module, again using libads code. -

    Memory Management

    +

    Memory Management

    The 'new SAM' development effort also concerned itself with getting a sane implementation of memory management. It was decided that we would be (as much as possible) talloc based, using an 'internal talloc @@ -1811,7 +1811,7 @@ NT_USER_TOKEN *access_token, uint32 access_desired, const DOM_SID NTSTATUS sam_enum_accounts(const SAM_CONTEXT *context, const NT_USER_TOKEN *access_token, const DOM_SID *domainsid, uint16 acct_ctrl, int32 *account_count, SAM_ACCOUNT_ENUM **accounts) -

    Testing

    +

    Testing

    Testing is vital in any piece of software, and Samba is certainly no exception. In designing this new subsystem, we have taken care to ensure it is easily tested, independent of outside protocols. @@ -1840,13 +1840,13 @@ Because the 'new SAM' is NT ACL based, there will be a command to specify an arbitrary NT ACL, but for now it uses 'system' by default.

    Chapter 14. LanMan and NT Password Encryption

    Jeremy Allison

    Samba Team

    19 Apr 1999

    Introduction

    With the development of LanManager and Windows NT +

    19 Apr 1999

    Introduction

    With the development of LanManager and Windows NT compatible password encryption for Samba, it is now able to validate user connections in exactly the same way as a LanManager or Windows NT server.

    This document describes how the SMB password encryption algorithm works and what issues there are in choosing whether you want to use it. You should read it carefully, especially - the part about security and the "PROS and CONS" section.

    How does it work?

    LanManager encryption is somewhat similar to UNIX + the part about security and the "PROS and CONS" section.

    How does it work?

    LanManager encryption is somewhat similar to UNIX password encryption. The server uses a file containing a hashed value of a user's password. This is created by taking the user's plaintext password, capitalising it, and either @@ -1883,7 +1883,7 @@ specify an arbitrary NT ACL, but for now it uses 'system' by default. know the correct password and is denied access.

    Note that the Samba server never knows or stores the cleartext of the user's password - just the 16 byte hashed values derived from it. Also note that the cleartext password or 16 byte hashed values - are never transmitted over the network - thus increasing security.

    The smbpasswd file

    In order for Samba to participate in the above protocol + are never transmitted over the network - thus increasing security.

    The smbpasswd file

    In order for Samba to participate in the above protocol it must be able to look up the 16 byte hashed values given a user name. Unfortunately, as the UNIX password value is also a one way hash function (ie. it is impossible to retrieve the cleartext of the user's @@ -1940,10 +1940,10 @@ bob:100:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX: to enable this on your server.

    Note : This file should be protected very carefully. Anyone with access to this file can (with enough knowledge of the protocols) gain access to your SMB server. The file is thus more - sensitive than a normal unix /etc/passwd file.

    Chapter 15. Modules

    Jelmer Vernooij

    Samba Team

    19 March 2003

    Advantages

    + sensitive than a normal unix /etc/passwd file.

    Chapter 15. Modules

    Jelmer Vernooij

    Samba Team

    19 March 2003

    Advantages

    The new modules system has the following advantages:

    Transparent loading of static and shared modules (no need -for a subsystem to know about modules)
    Simple selection between shared and static modules at configure time
    "preload modules" option for increasing performance for stable modules
    No nasty #define stuff anymore
    All backends are available as plugin now (including pdb_ldap and pdb_tdb)

    Loading modules

    +for a subsystem to know about modules)

    Simple selection between shared and static modules at configure time
    "preload modules" option for increasing performance for stable modules
    No nasty #define stuff anymore
    All backends are available as plugin now (including pdb_ldap and pdb_tdb)

    Loading modules

    Some subsystems in samba use different backends. These backends can be either statically linked in to samba or available as a plugin. A subsystem should have a function that allows a module to register itself. For example, @@ -1953,7 +1953,7 @@ NTSTATUS smb_register_passdb(int version, const char *name, pdb_init_function in

    This function will be called by the initialisation function of the module to register itself. -

    Static modules

    +

    Static modules

    The modules system compiles a list of initialisation functions for the static modules of each subsystem. This is a define. For example, it is here currently (from include/config.h): @@ -1963,7 +1963,7 @@ it is here currently (from include/config.h):

    These functions should be called before the subsystem is used. That should be done when the subsystem is initialised or first used. -

    Shared modules

    +

    Shared modules

    If a subsystem needs a certain backend, it should check if it has already been registered. If the backend hasn't been registered already, the subsystem should call smb_probe_module(char *subsystem, char *backend). @@ -1973,7 +1973,7 @@ is a slash, smb_probe_module() tries to load the module from the absolute path specified in 'backend'.

    After smb_probe_module() has been executed, the subsystem should check again if the module has been registered. -

    Writing modules

    +

    Writing modules

    Each module has an initialisation function. For modules that are included with samba this name is 'subsystem_backend_init'. For external modules (that will never be built-in, but only available as a module) this name is always 'init_module'. (In the case of modules included with samba, the configure system will add a #define subsystem_backend_init() init_module()). The prototype for these functions is: @@ -1988,7 +1988,7 @@ smb_register_passdb(PASSDB_INTERFACE_VERSION, "ldapsam", pdb_init_ldapsam); smb_register_passdb(PASSDB_INTERFACE_VERSION, "ldapsam_nua", pdb_init_ldapsam_nua); return NT_STATUS_OK; } -

    Static/Shared selection in configure.in

    +

    Static/Shared selection in configure.in

    Some macros in configure.in generate the various defines and substs that are necessary for the system to work correct. All modules that should be built by default have to be added to the variable 'default_modules'. @@ -2009,13 +2009,13 @@ Practically, this means all c files that contain static_init_

    Note

    There currently also is a configure.in command called SMB_MODULE_PROVIVES(). This is used for modules that register multiple things. It should not -be used as probing will most likely disappear in the future.

    Chapter 16. RPC Pluggable Modules

    Anthony Liguori

    Jelmer Vernooij

    Samba Team

    January 2003

    Table of Contents

    About
    General Overview

    About

    +be used as probing will most likely disappear in the future.

    Chapter 16. RPC Pluggable Modules

    Anthony Liguori

    Jelmer Vernooij

    Samba Team

    January 2003

    Table of Contents

    About
    General Overview

    About

    This document describes how to make use the new RPC Pluggable Modules features of Samba 3.0. This architecture was added to increase the maintainability of Samba allowing RPC Pipes to be worked on separately from the main CVS branch. The RPM architecture will also allow third-party vendors to add functionality to Samba through plug-ins. -

    General Overview

    +

    General Overview

    When an RPC call is sent to smbd, smbd tries to load a shared library by the name librpc_<pipename>.so to handle the call if it doesn't know how to handle the call internally. For instance, LSA calls @@ -2032,7 +2032,7 @@ NTSTATUS rpc_pipe_register_commands(int version, const char *clnt, const char *s argument.

    clnt

    the Client name of the named pipe

    srv

    the Server name of the named pipe

    cmds

    a list of api_structs that map RPC ordinal numbers to function calls

    size

    the number of api_structs contained in cmds

    See rpc_server/srv_reg.c and rpc_server/srv_reg_nt.c for a small example of how to use this library. -

    Chapter 17. VFS Modules

    Alexander Bokovoy

    Stefan Metzmacher

    27 May 2003

    The Samba (Posix) VFS layer

    The general interface

    +

    Chapter 17. VFS Modules

    Alexander Bokovoy

    Stefan Metzmacher

    27 May 2003

    The Samba (Posix) VFS layer

    The general interface

    Each VFS operation has a vfs_op_type, a function pointer and a handle pointer in the struct vfs_ops and tree macros to make it easier to call the operations. (Take a look at include/vfs.h and include/vfs_macros.h.) @@ -2128,7 +2128,7 @@ DO NOT ACCESS conn->vfs.ops.* directly !!! (tofd), (fsp), (fromfd), (header), (offset), (count))) ... -

    Possible VFS operation layers

    +

    Possible VFS operation layers

    These values are used by the VFS subsystem when building the conn->vfs and conn->vfs_opaque structs for a connection with multiple VFS modules. Internally, Samba differentiates only opaque and transparent layers at this process. @@ -2157,7 +2157,7 @@ typedef enum _vfs_op_layer { SMB_VFS_LAYER_SCANNER /* - Checks data and possibly initiates additional */ /* file activity like logging to files _inside_ samba VFS */ } vfs_op_layer; -

    The Interaction between the Samba VFS subsystem and the modules

    Initialization and registration

    +

    The Interaction between the Samba VFS subsystem and the modules

    Initialization and registration

    As each Samba module a VFS module should have a

    NTSTATUS vfs_example_init(void);

    function if it's staticly linked to samba or

    NTSTATUS init_module(void);

    function if it's a shared module. @@ -2197,7 +2197,7 @@ NTSTATUS init_module(void) { return smb_register_vfs(SMB_VFS_INTERFACE_VERSION, "example", example_op_tuples); } -

    How the Modules handle per connection data

    Each VFS function has as first parameter a pointer to the modules vfs_handle_struct. +

    How the Modules handle per connection data

    Each VFS function has as first parameter a pointer to the modules vfs_handle_struct.

     typedef struct vfs_handle_struct {
     	struct vfs_handle_struct  *next, *prev;
    @@ -2298,7 +2298,7 @@ you can set this function pointer to NULL.

    Some useful MAC (handle)->vfs_next.handles.sendfile,\ (tofd), (fsp), (fromfd), (header), (offset), (count))) ... -

    Upgrading to the New VFS Interface

    Upgrading from 2.2.* and 3.0aplha modules

    1. +

    Upgrading to the New VFS Interface

    Upgrading from 2.2.* and 3.0aplha modules

    1. Add "vfs_handle_struct *handle, " as first parameter to all vfs operation functions. e.g. example_connect(connection_struct *conn, const char *service, const char *user); -> example_connect(vfs_handle_struct *handle, connection_struct *conn, const char *service, const char *user); @@ -2422,7 +2422,7 @@ remember the struct smb_vfs_handle_struct.

    2. (Only for 3.0alpha* modules) Check if your vfs_done() function contains needed code. -

      If NOT you can remove the vfs_done() function.
      If YES decide if you can move the code to the example_disconnect() operation. Otherwise register a SMB_EXIT_EVENT with smb_register_exit_event(); (Described in the modules section) And then remove vfs_done(). e.g. the freeing of private data should go to example_disconnect(). +

      If NOT you can remove the vfs_done() function.
      If YES decide if you can move the code to the example_disconnect() operation. Otherwise register a SMB_EXIT_EVENT with smb_register_exit_event(); (Described in the ) And then remove vfs_done(). e.g. the freeing of private data should go to example_disconnect().

    3. Check if you have any global variables left. @@ -2561,7 +2561,7 @@ for your module.

    4. Compiling & Testing...

      ./configure --enable-developer ...
      make
      Try to fix all compiler warnings
      make
      Testing, Testing, Testing ...

      -

    5. Some Notes

      Implement TRANSPARENT functions

      +

      Some Notes

      Implement TRANSPARENT functions

      Avoid writing functions like this:

      @@ -2572,7 +2572,7 @@ static int example_close(vfs_handle_struct *handle, files_struct *fsp, int fd)
       

      Overload only the functions you really need to! -

      Implement OPAQUE functions

      +

      Implement OPAQUE functions

      If you want to just implement a better version of a default samba opaque function (e.g. like a disk_free() function for a special filesystem) @@ -2592,12 +2592,12 @@ static int example_rename(vfs_handle_struct *handle, connection_struct *conn, errno = ENOSYS; return -1; } -

      Chapter 18. Notes to packagers

      Jelmer Vernooij

      Table of Contents

      Versioning
      Modules

      Versioning

      Please, please update the version number in +

      Chapter 18. Notes to packagers

      Jelmer Vernooij

      Table of Contents

      Versioning
      Modules

      Versioning

      Please, please update the version number in source/include/version.h to include the versioning of your package. This makes it easier to distinguish standard samba builds from custom-build samba builds (distributions often patch packages). For example, a good version would be:

       Version 2.999+3.0.alpha21-5 for Debian
      -

      Modules

      Samba now has support for building parts of samba as plugins. This +

      Modules

      Samba now has support for building parts of samba as plugins. This makes it possible to, for example, put ldap or mysql support in a seperate package, thus making it possible to have a normal samba package not depending on ldap or mysql. To build as much parts of samba @@ -2631,11 +2631,11 @@ as a plugin, run:

       		with one that had issues. 
      Make sure your patch complies to the samba coding style as suggested in the coding-suggestions chapter.

      Sending in bugfixes

      Bugfixes to bugs in samba should be submitted to samba's - bugzilla system, + bugzilla system, along with a description of the bug.

      Sending in feature patches

      Send feature patches along with a description of what the patch is supposed to do to the - Samba-technical mailinglist and possibly to a samba team member who is (one of the) 'owners' + Samba-technical mailinglist and possibly to a samba team member who is (one of the) 'owners' of the code you made modifications to. We are all busy people so everybody tends to 'let one of the others handle it'. If nobody responded to your patch for a week, try to send it again until you diff --git a/docs/htmldocs/Samba-HOWTO-Collection.html b/docs/htmldocs/Samba-HOWTO-Collection.html index 566f0b4068..99b80eccdc 100644 --- a/docs/htmldocs/Samba-HOWTO-Collection.html +++ b/docs/htmldocs/Samba-HOWTO-Collection.html @@ -21,11 +21,11 @@ This book is a collection of HOWTOs added to Samba documentation over the years. Samba is always under development, and so is its' documentation. This release of the documentation represents a major revision or layout as well as contents. The most recent version of this document can be found at -http://www.samba.org/ +http://www.samba.org/ on the "Documentation" page. Please send updates to -Jelmer Vernooij, -John H. Terpstra or -Gerald (Jerry) Carter. +Jelmer Vernooij, +John H. Terpstra or +Gerald (Jerry) Carter.

      The Samba-Team would like to express sincere thanks to the many people who have with or without their knowledge contributed to this update. The size and scope of this @@ -34,49 +34,16 @@ insignificant number of ideas for inclusion (if not content itself) has been obt from a number of Unofficial HOWTOs - to each such author a big "Thank-you" is also offered. Please keep publishing your Unofficial HOWTOs - they are a source of inspiration and application knowledge that is most to be desired by many Samba users and administrators. -


    Table of Contents

    Legal Notice
    Attributions
    I. General Installation
    1. Introduction to Samba
    Background
    Terminology
    Related Projects
    SMB Methodology
    Epilogue
    Miscellaneous
    2. How to Install and Test SAMBA
    Obtaining and installing samba
    Configuring samba (smb.conf)
    Example Configuration
    SWAT
    Try listing the shares available on your - server
    Try connecting with the unix client
    Try connecting from another SMB client
    What If Things Don't Work?
    Common Errors
    Large number of smbd processes
    "open_oplock_ipc: Failed to get local UDP socket for address 100007f. Error was Cannot assign requested"
    "The network name cannot be found"
    3. Fast Start for the Impatient
    Note
    II. Server Configuration Basics
    4. Server Types and Security Modes
    Features and Benefits
    Server Types
    Samba Security Modes
    User Level Security
    Share Level Security
    Domain Security Mode (User Level Security)
    ADS Security Mode (User Level Security)
    Server Security (User Level Security)
    Password checking
    Common Errors
    What makes Samba a SERVER?
    What makes Samba a Domain Controller?
    What makes Samba a Domain Member?
    Constantly Losing Connections to Password Server
    5. Domain Control
    Features and Benefits
    Basics of Domain Control
    Domain Controller Types
    Preparing for Domain Control
    Domain Control - Example Configuration
    Samba ADS Domain Control
    Domain and Network Logon Configuration
    Domain Network Logon Service
    Security Mode and Master Browsers
    Common Errors
    '$' cannot be included in machine name
    Joining domain fails because of existing machine account
    The system can not log you on (C000019B)....
    The machine trust account not accessible
    Account disabled
    Domain Controller Unavailable
    Can not log onto domain member workstation after joining domain
    6. Backup Domain Control
    Features And Benefits
    Essential Background Information
    MS Windows NT4 Style Domain Control
    Active Directory Domain Control
    What qualifies a Domain Controller on the network?
    How does a Workstation find its domain controller?
    Backup Domain Controller Configuration
    Example Configuration
    Common Errors
    Machine Accounts keep expiring, what can I do?
    Can Samba be a Backup Domain Controller to an NT4 PDC?
    How do I replicate the smbpasswd file?
    Can I do this all with LDAP?
    7. Domain Membership
    Features and Benefits
    MS Windows Workstation/Server Machine Trust Accounts
    Manual Creation of Machine Trust Accounts
    Using NT4 Server Manager to Add Machine Accounts to the Domain
    "On-the-Fly" Creation of Machine Trust Accounts
    Making an MS Windows Workstation or Server a Domain Member
    Domain Member Server
    Joining an NT4 type Domain with Samba-3
    Why is this better than security = server?
    Samba ADS Domain Membership
    Setup your smb.conf
    Setup your /etc/krb5.conf
    Create the computer account
    Test your server setup
    Testing with smbclient
    Notes
    Common Errors
    Can Not Add Machine Back to Domain
    Adding Machine to Domain Fails
    8. Stand-Alone Servers
    Features and Benefits
    Background
    Example Configuration
    Reference Documentation Server
    Central Print Serving
    Common Errors
    9. MS Windows Network Configuration Guide
    Note
    III. Advanced Configuration
    10. Samba / MS Windows Network Browsing Guide
    Features and Benefits
    What is Browsing?
    Discussion
    NetBIOS over TCP/IP
    TCP/IP - without NetBIOS
    DNS and Active Directory
    How Browsing Functions
    Setting up WORKGROUP Browsing
    Setting up DOMAIN Browsing
    Forcing Samba to be the master
    Making Samba the domain master
    Note about broadcast addresses
    Multiple interfaces
    Use of the Remote Announce parameter
    Use of the Remote Browse Sync parameter
    WINS - The Windows Internetworking Name Server
    Setting up a WINS server
    WINS Replication
    Static WINS Entries
    Helpful Hints
    Windows Networking Protocols
    Name Resolution Order
    Technical Overview of browsing
    Browsing support in Samba
    Problem resolution
    Browsing across subnets
    Common Errors
    How can one flush the Samba NetBIOS name cache without restarting Samba?
    My client reports "This server is not configured to list shared resources"
    I get an Unable to browse the network error
    11. Account Information Databases
    Features and Benefits
    Backwards Compatibility Backends
    New Backends
    Technical Information
    Important Notes About Security
    Mapping User Identifiers between MS Windows and UNIX
    Mapping Common UIDs/GIDs on Distributed Machines
    Account Management Tools
    The smbpasswd Command
    The pdbedit Command
    Password Backends
    Plain Text
    smbpasswd - Encrypted Password Database
    tdbsam
    ldapsam
    MySQL
    XML
    Common Errors
    Users can not logon
    Users being added to wrong backend database
    auth methods does not work
    12. Mapping MS Windows and UNIX Groups
    Features and Benefits
    Discussion
    Example Configuration
    Configuration Scripts
    Sample smb.conf add group script
    Script to configure Group Mapping
    Common Errors
    Adding Groups Fails
    Adding MS Windows Groups to MS Windows Groups Fails
    Adding Domain Users to the Power Users group
    13. File, Directory and Share Access Controls
    Features and Benefits
    File System Access Controls
    MS Windows NTFS Comparison with UNIX File Systems
    Managing Directories
    File and Directory Access Control
    Share Definition Access Controls
    User and Group Based Controls
    File and Directory Permissions Based Controls
    Miscellaneous Controls
    Access Controls on Shares
    Share Permissions Management
    MS Windows Access Control Lists and UNIX Interoperability
    Managing UNIX permissions Using NT Security Dialogs
    Viewing File Security on a Samba Share
    Viewing file ownership
    Viewing File or Directory Permissions
    Modifying file or directory permissions
    Interaction with the standard Samba create mask - parameters
    Interaction with the standard Samba file attribute mapping
    Common Errors
    Users can not write to a public share
    I have set force user but Samba still makes root the owner of all the files I touch!
    MS Word with Samba changes owner of file
    14. File and Record Locking
    Features and Benefits
    Discussion
    Opportunistic Locking Overview
    Samba Opportunistic Locking Control
    Example Configuration
    MS Windows Opportunistic Locking and Caching Controls
    Workstation Service Entries
    Server Service Entries
    Persistent Data Corruption
    Common Errors
    locking.tdb error messages
    Problems saving files in MS Office on Windows XP
    Long delays deleting files over network with XP SP1
    Additional Reading
    15. Securing Samba
    Introduction
    Features and Benefits
    Technical Discussion of Protective Measures and Issues
    Using host based protection
    User based protection
    Using interface protection
    Using a firewall
    Using a IPC$ share deny
    NTLMv2 Security
    Upgrading Samba
    Common Errors
    Smbclient works on localhost, but the network is dead
    Why can users access home directories of other users?
    16. Interdomain Trust Relationships
    Features and Benefits
    Trust Relationship Background
    Native MS Windows NT4 Trusts Configuration
    Creating an NT4 Domain Trust
    Completing an NT4 Domain Trust
    Inter-Domain Trust Facilities
    Configuring Samba NT-style Domain Trusts
    Samba as the Trusted Domain
    Samba as the Trusting Domain
    NT4-style Domain Trusts with Windows 2000
    Common Errors
    17. Hosting a Microsoft Distributed File System tree on Samba
    Features and Benefits
    Common Errors
    18. Classical Printing Support
    Features and Benefits
    Technical Introduction
    What happens if you send a Job from a Client
    Printing Related Configuration Parameters
    Parameters Recommended for Use
    A simple Configuration to Print
    Verification of "Settings in Use" with testparm
    A little Experiment to warn you
    Extended Sample Configuration to Print
    Detailed Explanation of the Example's Settings
    The [global] Section
    The [printers] Section
    Any [my_printer_name] Section
    Print Commands
    Default Print Commands for various UNIX Print Subsystems
    Setting up your own Print Commands
    Innovations in Samba Printing since 2.2
    Client Drivers on Samba Server for Point'n'Print
    The [printer$] Section is removed from Samba 3
    Creating the [print$] Share
    Parameters in the [print$] Section
    Subdirectory Structure in [print$]
    Installing Drivers into [print$]
    Setting Drivers for existing Printers with a Client GUI
    Setting Drivers for existing Printers with -rpcclient
    Client Driver Install Procedure
    The first Client Driver Installation
    IMPORTANT! Setting Device Modes on new Printers
    Further Client Driver Install Procedures
    Always make first Client Connection as root or "printer admin"
    Other Gotchas
    Setting Default Print Options for the Client Drivers
    Supporting large Numbers of Printers
    Adding new Printers with the Windows NT APW
    Weird Error Message Cannot connect under a -different Name
    Be careful when assembling Driver Files
    Samba and Printer Ports
    Avoiding the most common Misconfigurations of the Client Driver
    The Imprints Toolset
    What is Imprints?
    Creating Printer Driver Packages
    The Imprints Server
    The Installation Client
    Add Network Printers at Logon without User Interaction
    The addprinter command
    Migration of "Classical" printing to Samba
    Publishing Printer Information in Active Directory or LDAP
    Common Errors
    I give my root password but I don't get access
    My printjobs get spooled into the spooling directory, but then get lost
    19. CUPS Printing Support in Samba 3.0
    Introduction
    Features and Benefits
    Overview
    Basic Configuration of CUPS support
    Linking of smbd with libcups.so
    Simple smb.conf Settings for CUPS
    More complex smb.conf Settings for -CUPS
    Advanced Configuration
    Central spooling vs. "Peer-to-Peer" printing
    CUPS/Samba as a "spooling-only" Print Server; "raw" printing -with Vendor Drivers on Windows Clients
    Driver Installation Methods on Windows Clients
    Explicitly enable "raw" printing for -application/octet-stream!
    Three familiar Methods for driver upload plus a new one
    Using CUPS/Samba in an advanced Way -- intelligent printing -with PostScript Driver Download
    GDI on Windows -- PostScript on UNIX
    Windows Drivers, GDI and EMF
    UNIX Printfile Conversion and GUI Basics
    PostScript and Ghostscript
    Ghostscript -- the Software RIP for non-PostScript Printers
    PostScript Printer Description (PPD) Specification
    CUPS can use all Windows-formatted Vendor PPDs
    CUPS also uses PPDs for non-PostScript Printers
    The CUPS Filtering Architecture
    MIME types and CUPS Filters
    MIME type Conversion Rules
    Filter Requirements
    Prefilters
    pstops
    pstoraster
    imagetops and imagetoraster
    rasterto [printers specific]
    CUPS Backends
    cupsomatic/Foomatic -- how do they fit into the Picture?
    The Complete Picture
    mime.convs
    "Raw" printing
    "application/octet-stream" printing
    PostScript Printer Descriptions (PPDs) for non-PS Printers
    Difference between cupsomatic/foomatic-rip and -native CUPS printing
    Examples for filtering Chains
    Sources of CUPS drivers / PPDs
    Printing with Interface Scripts
    Network printing (purely Windows)
    From Windows Clients to an NT Print Server
    Driver Execution on the Client
    Driver Execution on the Server
    Network Printing (Windows clients -- UNIX/Samba Print -Servers)
    From Windows Clients to a CUPS/Samba Print Server
    Samba receiving Jobfiles and passing them to CUPS
    Network PostScript RIP: CUPS Filters on Server -- clients use -PostScript Driver with CUPS-PPDs
    PPDs for non-PS Printers on UNIX
    PPDs for non-PS Printers on Windows
    Windows Terminal Servers (WTS) as CUPS Clients
    Printer Drivers running in "Kernel Mode" cause many -Problems
    Workarounds impose Heavy Limitations
    CUPS: a "Magical Stone"?
    PostScript Drivers with no major problems -- even in Kernel -Mode
    Setting up CUPS for driver Download
    cupsaddsmb: the unknown Utility
    Prepare your smb.conf for cupsaddsmb
    CUPS Package of "PostScript Driver for WinNT/2k/XP"
    Recognize the different Driver Files
    Acquiring the Adobe Driver Files
    ESP Print Pro Package of "PostScript Driver for -WinNT/2k/XP"
    Caveats to be considered
    Benefits of using "CUPS PostScript Driver for -Windows NT/2k/XP" instead of Adobe Driver
    Run "cupsaddsmb" (quiet Mode)
    Run "cupsaddsmb" with verbose Output
    Understanding cupsaddsmb
    How to recognize if cupsaddsmb completed successfully
    cupsaddsmb with a Samba PDC
    cupsaddsmb Flowchart
    Installing the PostScript Driver on a Client
    Avoiding critical PostScript Driver Settings on the -Client
    Installing PostScript Driver Files manually (using -rpcclient)
    A Check of the rpcclient man Page
    Understanding the rpcclient man page
    Producing an Example by querying a Windows Box
    What is required for adddriver and setdriver to succeed
    Manual Driver Installation in 15 Steps
    Troubleshooting revisited
    The printing *.tdb Files
    Trivial DataBase Files
    Binary Format
    Losing *.tdb Files
    Using tdbbackup
    CUPS Print Drivers from Linuxprinting.org
    foomatic-rip and Foomatic explained
    foomatic-rip and Foomatic-PPD Download and Installation
    Page Accounting with CUPS
    Setting up Quotas
    Correct and incorrect Accounting
    Adobe and CUPS PostScript Drivers for Windows Clients
    The page_log File Syntax
    Possible Shortcomings
    Future Developments
    Other Accounting Tools
    Additional Material
    Auto-Deletion or Preservation of CUPS Spool Files
    CUPS Configuration Settings explained
    Pre-conditions
    Manual Configuration
    In Case of Trouble.....
    Printing from CUPS to Windows attached -Printers
    More CUPS filtering Chains
    Common Errors
    Win9x client can't install driver
    "cupsaddsmb" keeps asking for root password in - neverending loop
    "cupsaddsmb" gives "No PPD file for printer..." - message while PPD file is present
    Client can't connect to Samba printer
    Can't reconnect to Samba under new account - from Win2K/XP
    Avoid being connected to the Samba server as the - "wrong" user
    Upgrading to CUPS drivers from Adobe drivers on - NT/2K/XP clients gives problems
    Can't use "cupsaddsmb" on Samba server which is - a PDC
    Deleted Win2K printer driver is still shown
    Win2K/XP "Local Security - Policies"
    WinXP clients: "Administrator can not install - printers for all local users"
    "Print Change Notify" functions on - NT-clients
    WinXP-SP1
    Print options for all users can't be set on Win2K/XP
    Most common blunders in driver - settings on Windows clients
    cupsaddsmb does not work - with newly installed printer
    Permissions on -/var/spool/samba/ get reset after each -reboot
    Printer named "lp" -intermittently swallows jobs and spits out completely different -ones
    Location of Adobe PostScript driver files necessary for "cupsaddsmb"
    An Overview of the CUPS Printing Processes
    20. Stackable VFS modules
    Features and Benefits
    Discussion
    Included modules
    audit
    extd_audit
    fake_perms
    recycle
    netatalk
    VFS modules available elsewhere
    DatabaseFS
    vscan
    21. Winbind: Use of Domain Accounts
    Features and Benefits
    Introduction
    What Winbind Provides
    Target Uses
    How Winbind Works
    Microsoft Remote Procedure Calls
    Microsoft Active Directory Services
    Name Service Switch
    Pluggable Authentication Modules
    User and Group ID Allocation
    Result Caching
    Installation and Configuration
    Introduction
    Requirements
    Testing Things Out
    Conclusion
    Common Errors
    NSCD Problem Warning
    22. Advanced Network Management
    Features and Benefits
    Remote Server Administration
    Remote Desktop Management
    Remote Management from NoMachines.Com
    Network Logon Script Magic
    Adding printers without user intervention
    Common Errors
    23. System and Account Policies
    Features and Benefits
    Creating and Managing System Policies
    Windows 9x/Me Policies
    Windows NT4 Style Policy Files
    MS Windows 200x / XP Professional Policies
    Managing Account/User Policies
    Samba Editreg Toolset
    Windows NT4/200x
    Samba PDC
    System Startup and Logon Processing Overview
    Common Errors
    Policy Does Not Work
    24. Desktop Profile Management
    Features and Benefits
    Roaming Profiles
    Samba Configuration for Profile Handling
    Windows Client Profile Configuration Information
    Sharing Profiles between W9x/Me and NT4/200x/XP workstations
    Profile Migration from Windows NT4/200x Server to Samba
    Mandatory profiles
    Creating/Managing Group Profiles
    Default Profile for Windows Users
    MS Windows 9x/Me
    MS Windows NT4 Workstation
    MS Windows 200x/XP
    Common Errors
    Setting up roaming profiles for just a few user's or group's?
    Can NOT use Roaming Profiles
    Changing the default profile
    25. PAM based Distributed Authentication
    Features and Benefits
    Technical Discussion
    PAM Configuration Syntax
    Example System Configurations
    smb.conf PAM Configuration
    Remote CIFS Authentication using winbindd.so
    Password Synchronization using pam_smbpass.so
    Common Errors
    pam_winbind problem
    Winbind is not resolving users and groups
    26. Integrating MS Windows networks with Samba
    Features and Benefits
    Background Information
    Name Resolution in a pure UNIX/Linux world
    /etc/hosts
    /etc/resolv.conf
    /etc/host.conf
    /etc/nsswitch.conf
    Name resolution as used within MS Windows networking
    The NetBIOS Name Cache
    The LMHOSTS file
    HOSTS file
    DNS Lookup
    WINS Lookup
    Common Errors
    Pinging works only in one way
    Very Slow Network Connections
    Samba server name change problem
    27. Unicode/Charsets
    Features and Benefits
    What are charsets and unicode?
    Samba and charsets
    Conversion from old names
    Japanese charsets
    Common errors
    CP850.so can't be found
    28. Samba Backup Techniques
    Note
    Features and Benefits
    29. High Availability Options
    Note
    IV. Migration and Updating
    30. Upgrading from Samba-2.x to Samba-3.0.0
    New Features in Samba-3
    Configuration Parameter Changes
    Removed Parameters
    New Parameters
    Modified Parameters (changes in behavior):
    New Functionality
    Databases
    Changes in Behavior
    Charsets
    Passdb Backends and Authentication
    Charsets
    LDAP
    31. Migration from NT4 PDC to Samba-3 PDC
    Planning and Getting Started
    Objectives
    Steps In Migration Process
    Migration Options
    Planning for Success
    Samba-3 Implementation Choices
    32. SWAT - The Samba Web Administration Tool
    Features and Benefits
    Enabling SWAT for use
    Securing SWAT through SSL
    The SWAT Home Page
    Global Settings
    Share Settings
    Printers Settings
    The SWAT Wizard
    The Status Page
    The View Page
    The Password Change Page
    V. Troubleshooting
    33. The Samba checklist
    Introduction
    Assumptions
    The tests
    34. Analysing and solving samba problems
    Diagnostics tools
    Debugging with Samba itself
    Tcpdump
    Ethereal
    The Windows Network Monitor
    Useful URLs
    Getting help from the mailing lists
    How to get off the mailing lists
    35. Reporting Bugs
    Introduction
    General info
    Debug levels
    Internal errors
    Attaching to a running process
    Patches
    VI. Appendixes
    36. How to compile Samba
    Access Samba source code via CVS
    Introduction
    CVS Access to samba.org
    Accessing the samba sources via rsync and ftp
    Verifying Samba's PGP signature
    Building the Binaries
    Compiling samba with Active Directory support
    Starting the smbd and nmbd
    Starting from inetd.conf
    Alternative: starting it as a daemon
    37. Portability
    HPUX
    SCO UNIX
    DNIX
    RedHat Linux Rembrandt-II
    AIX
    Sequential Read Ahead
    Solaris
    Locking improvements
    Winbind on Solaris 9
    38. Samba and other CIFS clients
    Macintosh clients?
    OS2 Client
    Configuring OS/2 Warp Connect or - OS/2 Warp 4 as a client for Samba
    Configuring OS/2 Warp 3 (not Connect), - OS/2 1.2, 1.3 or 2.x for Samba
    Printer driver download for for OS/2 clients?
    Windows for Workgroups
    Latest TCP/IP stack from Microsoft
    Delete .pwl files after password change
    Configuring WfW password handling
    Case handling of passwords
    Use TCP/IP as default protocol
    Speed improvement
    Windows '95/'98
    Speed improvement
    Windows 2000 Service Pack 2
    Windows NT 3.1
    39. Samba Performance Tuning
    Comparisons
    Socket options
    Read size
    Max xmit
    Log level
    Read raw
    Write raw
    Slow Logins
    Client tuning
    Samba performance problem due changing kernel
    Corrupt tdb Files
    40. DNS and DHCP Configuration Guide
    Note
    41. Further Resources
    Websites
    Related updates from Microsoft
    Index

    Legal Notice

    +


    Table of Contents

    Legal Notice
    Attributions
    I. General Installation
    1. Introduction to Samba
    Background
    Terminology
    Related Projects
    SMB Methodology
    Epilogue
    Miscellaneous
    2. How to Install and Test SAMBA
    Obtaining and Installing Samba
    Configuring Samba (smb.conf)
    Configuration file syntax
    Example Configuration
    SWAT
    List Shares Available on the Server
    Connect with a UNIX Client
    Connect from a Remote SMB Client
    What If Things Don't Work?
    Common Errors
    Large Number of smbd Processes
    Error Message: open_oplock_ipc
    The network name cannot be found
    3. Fast Start for the Impatient
    Note
    II. Server Configuration Basics
    4. Server Types and Security Modes
    Features and Benefits
    Server Types
    Samba Security Modes
    User Level Security
    Share Level Security
    Domain Security Mode (User Level Security)
    ADS Security Mode (User Level Security)
    Server Security (User Level Security)
    Password Checking
    Common Errors
    What Makes Samba a Server?
    What Makes Samba a Domain Controller?
    What Makes Samba a Domain Member?
    Constantly Losing Connections to Password Server
    5. Domain Control
    Features and Benefits
    Basics of Domain Control
    Domain Controller Types
    Preparing for Domain Control
    Domain Control Example Configuration
    Samba ADS Domain Control
    Domain and Network Logon Configuration
    Domain Network Logon Service
    Security Mode and Master Browsers
    Common Errors
    $ Cannot Be Included in Machine Name
    Joining Domain Fails Because of Existing Machine Account
    The System Cannot Log You On (C000019B)
    The Machine Trust Account Is Not Accessible
    Account Disabled
    Domain Controller Unavailable
    Cannot Log onto Domain Member Workstation After Joining Domain
    6. Backup Domain Control
    Features and Benefits
    Essential Background Information
    MS Windows NT4-style Domain Control
    LDAP Configuration Notes
    Active Directory Domain Control
    What Qualifies a Domain Controller on the Network?
    How does a Workstation find its Domain Controller?
    Backup Domain Controller Configuration
    Example Configuration
    Common Errors
    Machine Accounts Keep Expiring
    Can Samba Be a Backup Domain Controller to an NT4 PDC?
    How Do I Replicate the smbpasswd File?
    Can I Do This All with LDAP?
    7. Domain Membership
    Features and Benefits
    MS Windows Workstation/Server Machine Trust Accounts
    Manual Creation of Machine Trust Accounts
    Managing Domain Machine Accounts using NT4 Server Manager
    On-the-Fly Creation of Machine Trust Accounts
    Making an MS Windows Workstation or Server a Domain Member
    Domain Member Server
    Joining an NT4-type Domain with Samba-3
    Why Is This Better Than security = server?
    Samba ADS Domain Membership
    Configure smb.conf
    Configure /etc/krb5.conf
    Create the Computer Account
    Testing Server Setup
    Testing with smbclient
    Notes
    Sharing User ID Mappings between Samba Domain Members
    Common Errors
    Cannot Add Machine Back to Domain
    Adding Machine to Domain Fails
    I Can't Join a Windows 2003 PDC
    8. Stand-alone Servers
    Features and Benefits
    Background
    Example Configuration
    Reference Documentation Server
    Central Print Serving
    Common Errors
    9. MS Windows Network Configuration Guide
    Note
    III. Advanced Configuration
    10. Network Browsing
    Features and Benefits
    What Is Browsing?
    Discussion
    NetBIOS over TCP/IP
    TCP/IP without NetBIOS
    DNS and Active Directory
    How Browsing Functions
    Configuring WORKGROUP Browsing
    DOMAIN Browsing Configuration
    Forcing Samba to Be the Master
    Making Samba the Domain Master
    Note about Broadcast Addresses
    Multiple Interfaces
    Use of the Remote Announce Parameter
    Use of the Remote Browse Sync Parameter
    WINS The Windows Internetworking Name Server
    WINS Server Configuration
    WINS Replication
    Static WINS Entries
    Helpful Hints
    Windows Networking Protocols
    Name Resolution Order
    Technical Overview of Browsing
    Browsing Support in Samba
    Problem Resolution
    Cross-Subnet Browsing
    Common Errors
    How Can One Flush the Samba NetBIOS Name Cache without Restarting Samba?
    Server Resources Can Not Be Listed
    I get an `Unable to browse the network' error
    Browsing of Shares and Directories is Very Slow
    11. Account Information Databases
    Features and Benefits
    Backward Compatibility Backends
    New Backends
    Technical Information
    Important Notes About Security
    Mapping User Identifiers between MS Windows and UNIX
    Mapping Common UIDs/GIDs on Distributed Machines
    Account Management Tools
    The smbpasswd Command
    The pdbedit Command
    Password Backends
    Plaintext
    smbpasswd Encrypted Password Database
    tdbsam
    ldapsam
    MySQL
    XML
    Common Errors
    Users Cannot Logon
    Users Being Added to the Wrong Backend Database
    Configuration of auth methods
    12. Group Mapping MS Windows and UNIX
    Features and Benefits
    Discussion
    Default Users, Groups and Relative Identifiers
    Example Configuration
    Configuration Scripts
    Sample smb.conf Add Group Script
    Script to Configure Group Mapping
    Common Errors
    Adding Groups Fails
    Adding MS Windows Groups to MS Windows Groups Fails
    Adding Domain Users to the Power Users Group
    13. File, Directory and Share Access Controls
    Features and Benefits
    File System Access Controls
    MS Windows NTFS Comparison with UNIX File Systems
    Managing Directories
    File and Directory Access Control
    Share Definition Access Controls
    User and Group-Based Controls
    File and Directory Permissions-Based Controls
    Miscellaneous Controls
    Access Controls on Shares
    Share Permissions Management
    MS Windows Access Control Lists and UNIX Interoperability
    Managing UNIX Permissions Using NT Security Dialogs
    Viewing File Security on a Samba Share
    Viewing File Ownership
    Viewing File or Directory Permissions
    Modifying File or Directory Permissions
    Interaction with the Standard Samba create mask Parameters
    Interaction with the Standard Samba File Attribute Mapping
    Common Errors
    Users Cannot Write to a Public Share
    File Operations Done as root with force user Set
    MS Word with Samba Changes Owner of File
    14. File and Record Locking
    Features and Benefits
    Discussion
    Opportunistic Locking Overview
    Samba Opportunistic Locking Control
    Example Configuration
    MS Windows Opportunistic Locking and Caching Controls
    Workstation Service Entries
    Server Service Entries
    Persistent Data Corruption
    Common Errors
    locking.tdb Error Messages
    Problems Saving Files in MS Office on Windows XP
    Long Delays Deleting Files Over Network with XP SP1
    Additional Reading
    15. Securing Samba
    Introduction
    Features and Benefits
    Technical Discussion of Protective Measures and Issues
    Using Host-Based Protection
    User-Based Protection
    Using Interface Protection
    Using a Firewall
    Using IPC$ Share-Based Denials
    NTLMv2 Security
    Upgrading Samba
    Common Errors
    Smbclient Works on Localhost, but the Network Is Dead
    Why Can Users Access Home Directories of Other Users?
    16. Interdomain Trust Relationships
    Features and Benefits
    Trust Relationship Background
    Native MS Windows NT4 Trusts Configuration
    Creating an NT4 Domain Trust
    Completing an NT4 Domain Trust
    Inter-Domain Trust Facilities
    Configuring Samba NT-Style Domain Trusts
    Samba as the Trusted Domain
    Samba as the Trusting Domain
    NT4-Style Domain Trusts with Windows 2000
    Common Errors
    17. Hosting a Microsoft Distributed File System tree on Samba
    Features and Benefits
    Common Errors
    MSDFS UNIX Path Is Case-Critical
    18. Classical Printing Support
    Features and Benefits
    Technical Introduction
    Client to Samba Print Job Processing
    Printing Related Configuration Parameters
    Simple Print Configuration
    Verifing Configuration with testparm
    Rapid Configuration Validation
    Extended Printing Configuration
    Detailed Explanation Settings
    Printing Developments Since Samba-2.2
    Point'n'Print Client Drivers on Samba Servers
    The Obsoleted [printer$] Section
    Creating the [print$] Share
    [print$] Section Parameters
    The [print$] Share Directory
    Installing Drivers into [print$]
    Add Printer Wizard Driver Installation
    Installing Print Drivers Using rpcclient
    Client Driver Installation Procedure
    First Client Driver Installation
    Setting Device Modes on New Printers
    Additional Client Driver Installation
    Always Make First Client Connection as root or printer admin
    Other Gotchas
    Setting Default Print Options for Client Drivers
    Supporting Large Numbers of Printers
    Adding New Printers with the Windows NT APW
    Error Message: Cannot connect under a different Name
    Take Care When Assembling Driver Files
    Samba and Printer Ports
    Avoiding Common Client Driver Misconfiguration
    The Imprints Toolset
    What is Imprints?
    Creating Printer Driver Packages
    The Imprints Server
    The Installation Client
    Adding Network Printers without User Interaction
    The addprinter Command
    Migration of Classical Printing to Samba
    Publishing Printer Information in Active Directory or LDAP
    Common Errors
    I Give My Root Password but I Do Not Get Access
    My Print Jobs Get Spooled into the Spooling Directory, but Then Get Lost
    19. CUPS Printing Support
    Introduction
    Features and Benefits
    Overview
    Basic CUPS Support Configuration
    Linking smbd with libcups.so
    Simple smb.conf Settings for CUPS
    More Complex CUPS smb.conf Settings
    Advanced Configuration
    Central Spooling vs. Peer-to-Peer Printing
    Raw Print Serving Vendor Drivers on Windows Clients
    Installation of Windows Client Drivers
    Explicitly Enable raw Printing for application/octet-stream
    Driver Upload Methods
    Advanced Intelligent Printing with PostScript Driver Download
    GDI on Windows -- PostScript on UNIX
    Windows Drivers, GDI and EMF
    UNIX Printfile Conversion and GUI Basics
    PostScript and Ghostscript
    Ghostscript the Software RIP for Non-PostScript Printers
    PostScript Printer Description (PPD) Specification
    Using Windows-Formatted Vendor PPDs
    CUPS Also Uses PPDs for Non-PostScript Printers
    The CUPS Filtering Architecture
    MIME Types and CUPS Filters
    MIME Type Conversion Rules
    Filtering Overview
    Prefilters
    pstops
    pstoraster
    imagetops and imagetoraster
    rasterto [printers specific]
    CUPS Backends
    The Role of cupsomatic/foomatic
    The Complete Picture
    mime.convs
    Raw Printing
    application/octet-stream Printing
    PostScript Printer Descriptions (PPDs) for Non-PS Printers
    cupsomatic/foomatic-rip Versus native CUPS Printing
    Examples for Filtering Chains
    Sources of CUPS Drivers/PPDs
    Printing with Interface Scripts
    Network Printing (Purely Windows)
    From Windows Clients to an NT Print Server
    Driver Execution on the Client
    Driver Execution on the Server
    Network Printing (Windows Clients UNIX/Samba Print +Servers)
    From Windows Clients to a CUPS/Samba Print Server
    Samba Receiving Jobfiles and Passing Them to CUPS
    Network PostScript RIP
    PPDs for Non-PS Printers on UNIX
    PPDs for Non-PS Printers on Windows
    Windows Terminal Servers (WTS) as CUPS Clients
    Printer Drivers Running in Kernel Mode Cause Many +Problems
    Workarounds Impose Heavy Limitations
    CUPS: A Magical Stone?
    PostScript Drivers with No Major Problems Even in Kernel +Mode
    Configuring CUPS for Driver Download
    cupsaddsmb: The Unknown Utility
    Prepare Your smb.conf for cupsaddsmb
    CUPS PostScript Driver for Windows NT/200x/XP
    Recognizing Different Driver Files
    Acquiring the Adobe Driver Files
    ESP Print Pro PostScript Driver for Windows NT/200x/XP
    Caveats to be Considered
    Windows CUPS PostScript Driver Versus Adobe Driver
    Run cupsaddsmb (Quiet Mode)
    Run cupsaddsmb with Verbose Output
    Understanding cupsaddsmb
    How to Recognize If cupsaddsmb Completed Successfully
    cupsaddsmb with a Samba PDC
    cupsaddsmb Flowchart
    Installing the PostScript Driver on a Client
    Avoiding Critical PostScript Driver Settings on the Client
    Installing PostScript Driver Files Manually Using rpcclient
    A Check of the rpcclient man Page
    Understanding the rpcclient man Page
    Producing an Example by Querying a Windows Box
    Requirements for adddriver and setdriver to Succeed
    Manual Driver Installation in 15 Steps
    Troubleshooting Revisited
    The Printing *.tdb Files
    Trivial Database Files
    Binary Format
    Losing *.tdb Files
    Using tdbbackup
    CUPS Print Drivers from Linuxprinting.org
    foomatic-rip and Foomatic Explained
    foomatic-rip and Foomatic-PPD Download and Installation
    Page Accounting with CUPS
    Setting Up Quotas
    Correct and Incorrect Accounting
    Adobe and CUPS PostScript Drivers for Windows Clients
    The page_log File Syntax
    Possible Shortcomings
    Future Developments
    Additional Material
    Auto-Deletion or Preservation of CUPS Spool Files
    CUPS Configuration Settings Explained
    Pre-Conditions
    Manual Configuration
    Printing from CUPS to Windows Attached Printers
    More CUPS-Filtering Chains
    Common Errors
    Windows 9x/ME Client Can't Install Driver
    cupsaddsmb Keeps Asking for Root Password in Never-ending Loop
    cupsaddsmb Errors
    Client Can't Connect to Samba Printer
    New Account Reconnection from Windows 200x/XP Troubles
    Avoid Being Connected to the Samba Server as the Wrong User
    Upgrading to CUPS Drivers from Adobe Drivers
    Can't Use cupsaddsmb on Samba Server Which Is a PDC
    Deleted Windows 200x Printer Driver Is Still Shown
    Windows 200x/XP "Local Security Policies"
    Administrator Cannot Install Printers for All Local Users
    Print Change Notify Functions on NT-clients
    WinXP-SP1
    Print Options for All Users Can't Be Set on Windows 200x/XP
    Most Common Blunders in Driver Settings on Windows Clients
    cupsaddsmb Does Not Work with Newly Installed Printer
    Permissions on /var/spool/samba/ Get Reset After Each Reboot
    Print Queue Called lp Mis-handles Print Jobs
    Location of Adobe PostScript Driver Files for cupsaddsmb
    Overview of the CUPS Printing Processes
    20. Stackable VFS modules
    Features and Benefits
    Discussion
    Included Modules
    audit
    extd_audit
    fake_perms
    recycle
    netatalk
    VFS Modules Available Elsewhere
    DatabaseFS
    vscan
    21. Winbind: Use of Domain Accounts
    Features and Benefits
    Introduction
    What Winbind Provides
    Target Uses
    How Winbind Works
    Microsoft Remote Procedure Calls
    Microsoft Active Directory Services
    Name Service Switch
    Pluggable Authentication Modules
    User and Group ID Allocation
    Result Caching
    Installation and Configuration
    Introduction
    Requirements
    Testing Things Out
    Conclusion
    Common Errors
    NSCD Problem Warning
    Winbind Is Not Resolving Users and Groups
    22. Advanced Network Management
    Features and Benefits
    Remote Server Administration
    Remote Desktop Management
    Remote Management from NoMachine.Com
    Network Logon Script Magic
    Adding Printers without User Intervention
    23. System and Account Policies
    Features and Benefits
    Creating and Managing System Policies
    Windows 9x/ME Policies
    Windows NT4-Style Policy Files
    MS Windows 200x/XP Professional Policies
    Managing Account/User Policies
    Management Tools
    Samba Editreg Toolset
    Windows NT4/200x
    Samba PDC
    System Startup and Logon Processing Overview
    Common Errors
    Policy Does Not Work
    24. Desktop Profile Management
    Features and Benefits
    Roaming Profiles
    Samba Configuration for Profile Handling
    Windows Client Profile Configuration Information
    Sharing Profiles between W9x/Me and NT4/200x/XP Workstations
    Profile Migration from Windows NT4/200x Server to Samba
    Mandatory Profiles
    Creating and Managing Group Profiles
    Default Profile for Windows Users
    MS Windows 9x/Me
    MS Windows NT4 Workstation
    MS Windows 200x/XP
    Common Errors
    Configuring Roaming Profiles for a Few Users or Groups
    Cannot Use Roaming Profiles
    Changing the Default Profile
    25. PAM-Based Distributed Authentication
    Features and Benefits
    Technical Discussion
    PAM Configuration Syntax
    Example System Configurations
    smb.conf PAM Configuration
    Remote CIFS Authentication Using winbindd.so
    Password Synchronization Using pam_smbpass.so
    Common Errors
    pam_winbind Problem
    Winbind Is Not Resolving Users and Groups
    26. Integrating MS Windows Networks with Samba
    Features and Benefits
    Background Information
    Name Resolution in a Pure UNIX/Linux World
    /etc/hosts
    /etc/resolv.conf
    /etc/host.conf
    /etc/nsswitch.conf
    Name Resolution as Used within MS Windows Networking
    The NetBIOS Name Cache
    The LMHOSTS File
    HOSTS File
    DNS Lookup
    WINS Lookup
    Common Errors
    Pinging Works Only in One Way
    Very Slow Network Connections
    Samba Server Name Change Problem
    27. Unicode/Charsets
    Features and Benefits
    What Are Charsets and Unicode?
    Samba and Charsets
    Conversion from Old Names
    Japanese Charsets
    Common Errors
    CP850.so Can't Be Found
    28. Samba Backup Techniques
    Note
    Features and Benefits
    29. High Availability Options
    Note
    IV. Migration and Updating
    30. Upgrading from Samba-2.x to Samba-3.0.0
    Quick Migration Guide
    New Features in Samba-3
    Configuration Parameter Changes
    Removed Parameters
    New Parameters
    Modified Parameters (Changes in Behavior):
    New Functionality
    Databases
    Changes in Behavior
    Charsets
    Passdb Backends and Authentication
    LDAP
    31. Migration from NT4 PDC to Samba-3 PDC
    Planning and Getting Started
    Objectives
    Steps in Migration Process
    Migration Options
    Planning for Success
    Samba-3 Implementation Choices
    32. SWAT The Samba Web Administration Tool
    Features and Benefits
    Guidelines and Technical Tips
    Validate SWAT Installation
    Enabling SWAT for Use
    Securing SWAT through SSL
    Enabling SWAT Internationalization Support
    Overview and Quick Tour
    The SWAT Home Page
    Global Settings
    Share Settings
    Printers Settings
    The SWAT Wizard
    The Status Page
    The View Page
    The Password Change Page
    V. Troubleshooting
    33. The Samba Checklist
    Introduction
    Assumptions
    The Tests
    34. Analyzing and Solving Samba Problems
    Diagnostics Tools
    Debugging with Samba Itself
    Tcpdump
    Ethereal
    The Windows Network Monitor
    Useful URLs
    Getting Mailing List Help
    How to Get Off the Mailing Lists
    35. Reporting Bugs
    Introduction
    General Information
    Debug Levels
    Internal Errors
    Attaching to a Running Process
    Patches
    VI. Appendixes
    36. How to Compile Samba
    Access Samba Source Code via CVS
    Introduction
    CVS Access to samba.org
    Accessing the Samba Sources via rsync and ftp
    Verifying Samba's PGP Signature
    Building the Binaries
    Compiling Samba with Active Directory Support
    Starting the smbd and nmbd
    Starting from inetd.conf
    Alternative: Starting smbd as a Daemon
    37. Portability
    HPUX
    SCO UNIX
    DNIX
    Red Hat Linux
    AIX
    Sequential Read Ahead
    Solaris
    Locking Improvements
    Winbind on Solaris 9
    38. Samba and Other CIFS Clients
    Macintosh Clients
    OS2 Client
    Configuring OS/2 Warp Connect or OS/2 Warp 4
    Configuring Other Versions of OS/2
    Printer Driver Download for OS/2 Clients
    Windows for Workgroups
    Latest TCP/IP Stack from Microsoft
    Delete .pwl Files After Password Change
    Configuring Windows for Workgroups Password Handling
    Password Case Sensitivity
    Use TCP/IP as Default Protocol
    Speed Improvement
    Windows 95/98
    Speed Improvement
    Windows 2000 Service Pack 2
    Windows NT 3.1
    39. Samba Performance Tuning
    Comparisons
    Socket Options
    Read Size
    Max Xmit
    Log Level
    Read Raw
    Write Raw
    Slow Logins
    Client Tuning
    Samba Performance Problem Due to Changing Linux Kernel
    Corrupt tdb Files
    40. DNS and DHCP Configuration Guide
    Note
    41. Further Resources
    Websites
    Related updates from Microsoft
    Index

    Legal Notice

    This documentation is distributed under the GNU General Public License (GPL) version 2. A copy of the license is included with the Samba source -distribution. A copy can be found on-line at http://www.fsf.org/licenses/gpl.txt -

    Attributions

    Introduction to Samba

    How to Install and Test SAMBA

    Fast Start for the Impatient

    Server Types and Security Modes

    Domain Control

    Backup Domain Control

    Domain Membership

    Stand-Alone Servers

    MS Windows Network Configuration Guide

    Samba / MS Windows Network Browsing Guide

    Account Information Databases

    Mapping MS Windows and UNIX Groups

    File, Directory and Share Access Controls

    File and Record Locking

    Securing Samba

    Interdomain Trust Relationships

    Hosting a Microsoft Distributed File System tree on Samba

    Classical Printing Support

    CUPS Printing Support in Samba 3.0

    Stackable VFS modules

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Tim Potter

    • Simo Sorce (original vfs_skel README)

    • Alexander Bokovoy (original vfs_netatalk docs)

    • Stefan Metzmacher (Update for multiple modules)

    Advanced Network Management

    System and Account Policies

    Desktop Profile Management

    PAM based Distributed Authentication

    Integrating MS Windows networks with Samba

    Unicode/Charsets

    Samba Backup Techniques

    High Availability Options

    Upgrading from Samba-2.x to Samba-3.0.0

    Migration from NT4 PDC to Samba-3 PDC

    SWAT - The Samba Web Administration Tool

    The Samba checklist

    Analysing and solving samba problems

    Reporting Bugs

    How to compile Samba

    Portability

    Samba and other CIFS clients

    Samba Performance Tuning

    DNS and DHCP Configuration Guide

    Further Resources

    General Installation

    Preparing Samba for Configuration

    This section of the Samba-HOWTO-Collection contains general info on how to install samba +distribution. A copy can be found on-line at http://www.fsf.org/licenses/gpl.txt +

    Attributions

    • David Lechnyr <david@lechnyr.com>

    • Andrew Tridgell <tridge@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Karl Auer <kauer@biplane.com.au>

    • Dan Shearer <dan@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Andrew Tridgell <tridge@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Gerald (Jerry) Carter <jerry@samba.org>

    • David Bannon <dbannon@samba.org>

    • Guenther Deschner <gd@suse.de> (LDAP updates)

    • John H. Terpstra <jht@samba.org>

    • Volker Lendecke <Volker.Lendecke@SerNet.DE>

    • Guenther Deschner <gd@suse.de> (LDAP updates)

    • John H. Terpstra <jht@samba.org>

    • Jeremy Allison <jra@samba.org>

    • Gerald (Jerry) Carter <jerry@samba.org>

    • Andrew Tridgell <tridge@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • Guenther Deschner <gd@suse.de> (LDAP updates)

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Gerald (Jerry) Carter <jerry@samba.org>

    • Jeremy Allison <jra@samba.org>

    • Guenther Deschner <gd@suse.de> (LDAP updates)

    • Olivier (lem) Lemaire <olem@IDEALX.org>

    • John H. Terpstra <jht@samba.org>

    • Jean François Micouleau

    • Gerald (Jerry) Carter <jerry@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Jeremy Allison <jra@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org> (drawing)

    • Jeremy Allison <jra@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Eric Roseme <eric.roseme@hp.com>

    • Andrew Tridgell <tridge@samba.org>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Rafal Szczesniak <mimir@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org> (drawing)

    • Stephen Langasek <vorlon@netexpress.net>

    • Shirish Kalele <samba@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Kurt Pfeifle <kpfeifle@danka.de>

    • Gerald (Jerry) Carter <jerry@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Kurt Pfeifle <kpfeifle@danka.de>

    • Ciprian Vizitiu <CVizitiu@gbif.org> (drawings)

    • Jelmer R. Vernooij <jelmer@samba.org> (drawings)

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Tim Potter <tpot@samba.org>

    • Simo Sorce (original vfs_skel README)

    • Alexander Bokovoy (original vfs_netatalk docs)

    • Stefan Metzmacher (Update for multiple modules)

    • Tim Potter <tpot@linuxcare.com.au>

    • Andrew Tridgell <tridge@samba.org>

    • Naag Mummaneni <getnag@rediffmail.com> (Notes for Solaris)

    • John Trostel <jtrostel@snapserver.com>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Stephen Langasek <vorlon@netexpress.net>

    • John H. Terpstra <jht@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • TAKAHASHI Motonobu <monyo@home.monyo.com>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Gerald (Jerry) Carter <jerry@samba.org>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Andrew Tridgell <tridge@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • Dan Shearer <dan@samba.org>

    • Gerald (Jerry) Carter <jerry@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • David Bannon <dbannon@samba.org>

    • Dan Shearer <dan@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • Andrew Tridgell <tridge@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Andrew Tridgell <tridge@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Dan Shearer <dan@samba.org>

    • Jim McDonough <jmcd@us.ibm.com> (OS/2)

    • Paul Cochrane <paulc@dth.scot.nhs.uk>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    General Installation

    Chapter 1. Introduction to Samba

    David Lechnyr

    Unofficial HOWTO

    April 14, 2003

    "If you understand what you're doing, you're not learning anything." -- Anonymous

    @@ -85,7 +52,7 @@ transport protocol. In fact, it can support any SMB/CIFS-enabled client. One of strengths is that you can use it to blend your mix of Windows and Linux machines together without requiring a separate Windows NT/2000/2003 Server. Samba is actively being developed by a global team of about 30 active programmers and was originally developed by Andrew Tridgell. -

    Background

    +

    Background

    Once long ago, there was a buzzword referred to as DCE/RPC. This stood for Distributed Computing Environment/Remote Procedure Calls and conceptually was a good idea. It was originally developed by Apollo/HP as NCA 1.0 (Network Computing Architecture) and only @@ -111,7 +78,7 @@ been dutifully waded through during the information-gathering stages of this pro are *still* many missing pieces... While often tedious, at least the way has been generously littered with occurrences of clapping hand to forehead and muttering 'crikey, what are they thinking? -

    Terminology

    • +

    Terminology

    • SMB: Acronym for "Server Message Block". This is Microsoft's file and printer sharing protocol.

    • CIFS: Acronym for "Common Internet File System". Around 1996, Microsoft apparently @@ -160,8 +127,8 @@ thinking?

    • W3K: Acronym for Windows 2003 Server

    If you plan on getting help, make sure to subscribe to the Samba Mailing List (available at -http://www.samba.org). -

    Related Projects

    +http://www.samba.org). +

    Related Projects

    There are currently two network filesystem client projects for Linux that are directly related to Samba: SMBFS and CIFS VFS. These are both available in the Linux kernel itself.

    • @@ -181,9 +148,9 @@ Again, it's important to note that these are implementations for client filesyst nothing to do with acting as a file and print server for SMB/CIFS clients.

      There are other Open Source CIFS client implementations, such as the -jCIFS project +jCIFS project which provides an SMB client toolkit written in Java. -

    SMB Methodology

    +

    SMB Methodology

    Traditionally, SMB uses UDP port 137 (NetBIOS name service, or netbios-ns), UDP port 138 (NetBIOS datagram service, or netbios-dgm), and TCP port 139 (NetBIOS session service, or netbios-ssn). Anyone looking at their network with a good @@ -213,9 +180,9 @@ up a single file. In general, SMB sessions are established in the following orde to a service type (e.g., IPC$ named pipe)

    A good way to examine this process in depth is to try out -SecurityFriday's SWB program. +SecurityFriday's SWB program. It allows you to walk through the establishment of a SMB/CIFS session step by step. -

    Epilogue

    +

    Epilogue

    What's fundamentally wrong is that nobody ever had any taste when they did it. Microsoft has been very much into making the user interface look good, but internally it's just a complete mess. And even people who program for Microsoft @@ -243,222 +210,238 @@ not the completely clueless user who probably sits there shivering thinking

    That's what's really irritating to me."

    -- -Linus Torvalds, from an interview with BOOT Magazine, Sept 1998 -

    Miscellaneous

    +Linus Torvalds, from an interview with BOOT Magazine, Sept 1998 +

    Miscellaneous

    This chapter is Copyright 2003 David Lechnyr (david at lechnyr dot com). Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation. A copy of the license is available at http://www.gnu.org/licenses/fdl.txt. -

    Chapter 2. How to Install and Test SAMBA

    Andrew Tridgell

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Karl Auer

    Dan Shearer

    Samba Team

    Obtaining and Installing Samba

    + Binary packages of Samba are included in almost any Linux or UNIX distribution. There are also some packages available at - the samba homepage. -

    If you need to compile samba from source, check - the chapter about compiling samba from scratch.

    If you have already installed samba, or if your operating system - was pre-installed with samba, then you may not need to bother with this - chapter. On the other hand, you may want to read this chapter anyhow - for information about updating samba.

    Configuring samba (smb.conf)

    - Samba's configuration is stored in the smb.conf file, - that usually resides in /etc/samba/smb.conf + the Samba homepage. Refer to + the manual of your operating system for details on installing packages + for your specific operating system. +

    If you need to compile Samba from source, check + .

    Configuring Samba (smb.conf)

    + Samba's configuration is stored in the smb.conf file, which + usually resides in /etc/samba/smb.conf or /usr/local/samba/lib/smb.conf. You can either edit this file yourself or do it using one of the many graphical - tools that are available, such as the web-based interface swat, that - is included with samba. -

    Example Configuration

    + tools that are available, such as the Web-based interface SWAT, that + is included with Samba. +

    Configuration file syntax

    The smb.conf file uses the same syntax as the various old + .ini files in Windows 3.1: Each file consists of various sections, + which are started by putting the section name between brackets ([]) + on a new line. Each contains zero or more key/value-pairs seperated by an + equality sign (=). The file is just a plain-text file, so you can + open and edit it with your favorite editing tool.

    Each section in the smb.conf file represents a share + on the Samba server. The section “global” is special, since it + contains settings that apply to the whole Samba server and not + to one share in particular.

    contains a very minimal smb.conf. + +

    Example 2.1. A minimal smb.conf

    [global]
    workgroup = WKG
    netbios name = MYNAME
    [share1]
    path = /tmp
    [share2]
    path = /my_shared_folder
    comment = Some random files

    Example Configuration

    There are sample configuration files in the examples subdirectory in the - distribution. I suggest you read them carefully so you can see how the options - go together in practice. See the man page for all the options. + distribution. It is suggested you read them carefully so you can see how the options + go together in practice. See the man page for all the options. + It might be worthwhile to start out with the smb.conf.default + configuration file and adapt it to your needs. It contains plenty of + comments.

    - The simplest useful configuration file would be something like this: + The simplest useful configuration file would contain something like shown in + .

    -

    Example 2.1. Simplest possible smb.conf file

    [global]
    workgroup = MIDEARTH
    [homes]
    guest ok = no
    read only = no

    + +

    Example 2.2. Another simple smb.conf File

    [global]
    workgroup = MIDEARTH
    [homes]
    guest ok = no
    read only = no

    This will allow connections by anyone with an account on the server, using either - their login name or homes" as the service name. - (Note that the workgroup that Samba must also be set.) + their login name or homes as the service name. + (Note: The workgroup that Samba should appear in must also be set. The default + workgroup name is WORKGROUP.)

    - Make sure you put the smb.conf file in the correct place - (usually in /etc/samba). + Make sure you put the smb.conf file in the correct place.

    For more information about security settings for the [homes] share please refer to - "Securing Samba". -

    Test your config file with testparm

    - It's important that you test the validity of your smb.conf - file using the testparm program. If testparm runs OK - then it will list the loaded services. If not it will give an error message. -

    - Make sure it runs OK and that the services look reasonable before proceeding. -

    - Always run testparm again when you change smb.conf! -

    SWAT

    - SWAT is a web-based interface that helps you configure samba. - SWAT might not be available in the samba package on your platform, - but in a separate package. Please read the swat manpage - on compiling, installing and configuring swat from source. -

    - To launch SWAT just run your favorite web browser and - point it at http://localhost:901/. Replace - localhost - with the name of the computer you are running samba on if you - are running samba on a different computer than your browser. -

    - Note that you can attach to SWAT from any IP connected - machine but connecting from a remote machine leaves your - connection open to password sniffing as passwords will be sent - in the clear over the wire. -

    Try listing the shares available on your - server

    +	.
    +	

    Test Your Config File with testparm

    + It's important to validate the contents of the smb.conf file using the testparm program. + If testparm runs correctly, it will list the loaded services. If not, it will give an error message. + Make sure it runs correctly and that the services look reasonable before proceeding. Enter the command: +

    +	root#  testparm /etc/samba/smb.conf
    +	

    Testparm will parse your configuration file and report + any unknown parameters or incorrect syntax.

    + Always run testparm again whenever the smb.conf file is changed! +

    SWAT

    + + SWAT is a Web-based interface that can be used to facilitate the configuration of Samba. + SWAT might not be available in the Samba package that shipped with your platform, + but in a separate package. Please read the SWAT manpage + on compiling, installing and configuring SWAT from source. +

    + To launch SWAT, just run your favorite Web browser and point it to + http://localhost:901/. + Replace localhost with the name of the computer on which + Samba is running if that is a different computer than your browser. +

    + SWAT can be used from a browser on any IP-connected machine, but be aware that connecting from a remote + machine leaves your connection open to password sniffing as passwords will be sent over the wire in the clear. +

    More information about SWAT can be found in .

    List Shares Available on the Server

    + To list shares that are available from the configured Samba server execute the + following command: +

     $ smbclient -L yourhostname
    -

    You should get back a list of shares available on - your server. If you don't then something is incorrectly setup. - Note that this method can also be used to see what shares - are available on other LanManager clients (such as WfWg).

    If you choose user level security then you may find - that Samba requests a password before it will list the shares. - See the smbclient man page for details. (you - can force it to list the shares without a password by - adding the option -U% to the command line. This will not work - with non-Samba servers)

    Try connecting with the unix client

    +

    You should see a list of shares available on your server. If you do not, then + something is incorrectly configured. This method can also be used to see what shares + are available on other SMB servers, such as Windows 2000.

    If you choose user-level security you may find that Samba requests a password + before it will list the shares. See the smbclient man page for details. + You can force it to list the shares without a password by adding the option + -N to the command line.

    Connect with a UNIX Client

    + Enter the following command:

     $ smbclient  //yourhostname/aservice
    -

    Typically the yourhostname - would be the name of the host where you installed smbd. - The aservice is - any service you have defined in the smb.conf - file. Try your user name if you just have a [homes] - section - in smb.conf.

    For example if your unix host is bambi - and your login name is fred you would type:

    +

    Typically yourhostname is the name of the host on which smbd + has been installed. The aservice is any service that has been defined in the smb.conf + file. Try your user name if you just have a [homes] section in the smb.conf file.

    Example: If the UNIX host is called bambi and a valid login name + is fred, you would type:

     $ smbclient //bambi/fred
    -

    Try connecting from another SMB client

    Try mounting disks. from a DOS, Windows or OS/2 client, eg:

    +

    Connect from a Remote SMB Client

    Now that Samba is working correctly locally, you can try to + access it from other clients. Within a few minutes, the Samba host + should be listed in the Network Neighborhood on all Windows + clients of its subnet. Try browsing the server from another client + or 'mounting' it.

    Mounting disks from a DOS, Windows or OS/2 client can be done by running a command such as:

     C:\> net use d: \\servername\service
    -

    Try printing. eg:

    +

    Try printing, e.g.

     C:\> net use lpt1:	\\servername\spoolservice
     

    C:\> print filename
    -

    What If Things Don't Work?

    Then you might read the file chapter diagnosis - and the FAQ. If you are still stuck then refer to "Analysing and solving problems". - Samba has been successfully installed at thousands of sites worldwide, - so maybe someone else has hit your problem and has overcome it.

    Common Errors

    -The following questions and issues get raised on the samba mailing list over and over again. -

    Large number of smbd processes

    -Samba consists on three core programs: -nmbd, smbd, winbindd. nmbd is the name server message daemon, -smbd is the server message daemon, winbindd is the daemon that -handles communication with Domain Controllers. -

    -If your system is NOT running as a WINS server, then there will be one (1) single instance of +

    What If Things Don't Work?

    You might want to read . + If you are still stuck, refer to . + Samba has been successfully installed at thousands of sites worldwide. + It is unlikely that your particular problem is unique, so it might be + productive to perform an Internet search to see if someone else has encountered + your problem and has found a way to overcome it.

    Common Errors

    +The following questions and issues are raised repeatedly on the Samba mailing list. +

    Large Number of smbd Processes

    +Samba consists of three core programs: nmbd, smbd, and winbindd. nmbd is the name server message daemon, +smbd is the server message daemon, and winbindd is the daemon that handles communication with Domain Controllers. +

    +If Samba is not running as a WINS server, then there will be one single instance of nmbd running on your system. If it is running as a WINS server then there will be -two (2) instances - one to handle the WINS requests. +two instances one to handle the WINS requests.

    -smbd handles ALL connection requests and then spawns a new process for each client -connection made. That is why you are seeing so many of them, one (1) per client connection. +smbd handles all connection requests. It spawns a new process for each client +connection made. That is why you may see so many of them, one per client connection.

    winbindd will run as one or two daemons, depending on whether or not it is being -run in "split mode" (in which case there will be two instances). -

    "open_oplock_ipc: Failed to get local UDP socket for address 100007f. Error was Cannot assign requested"

    Your loopback device isn't working correctly. Make sure it's configured properly. The loopback device is an internal (virtual) network device with - the ip address 127.0.0.1. Read your OS documentation for details - on how to configure the loopback on your system.

    "The network name cannot be found"

    - This error can be caused by one of these misconfigurations: -

    • You specified an nonexisting path for the share in smb.conf

    • The user you are trying to access the share with does not - have sufficient permissions to access the path for the share. Both read (r) and access (x) should be possible.

    • The share you are trying to access does not exist.

    Chapter 3. Fast Start for the Impatient

    John H. Terpstra

    Samba Team

    Table of Contents

    Note

    Note

    +run in split mode (in which case there will be two instances). +

    Error Message: open_oplock_ipc

    An error message is observed in the log files when smbd is started: “open_oplock_ipc: Failed to get local UDP socket + for address 100007f. Error was Cannot assign requested.

    Your loopback device isn't working correctly. Make sure it is configured correctly. The loopback + device is an internal (virtual) network device with the IP address 127.0.0.1. + Read your OS documentation for details on how to configure the loopback on your system.

    The network name cannot be found

    + This error can be caused by one of these misconfigurations: +

    • You specified an nonexisting path + for the share in smb.conf.

    • The user you are trying to access the share with does not + have sufficient permissions to access the path for + the share. Both read (r) and access (x) should be possible.

    • The share you are trying to access does not exist.

    Chapter 3. Fast Start for the Impatient

    John H. Terpstra

    Samba Team

    Table of Contents

    Note

    Note

    This chapter did not make it into this release. It is planned for the published release of this document. -

    Server Configuration Basics

    First Steps in Server Configuration

    +

    Server Configuration Basics

    First Steps in Server Configuration

    Samba can operate in various modes within SMB networks. This HOWTO section contains information on configuring samba to function as the type of server your network requires. Please read this section carefully. -

    Table of Contents

    4. Server Types and Security Modes
    Features and Benefits
    Server Types
    Samba Security Modes
    User Level Security
    Share Level Security
    Domain Security Mode (User Level Security)
    ADS Security Mode (User Level Security)
    Server Security (User Level Security)
    Password checking
    Common Errors
    What makes Samba a SERVER?
    What makes Samba a Domain Controller?
    What makes Samba a Domain Member?
    Constantly Losing Connections to Password Server
    5. Domain Control
    Features and Benefits
    Basics of Domain Control
    Domain Controller Types
    Preparing for Domain Control
    Domain Control - Example Configuration
    Samba ADS Domain Control
    Domain and Network Logon Configuration
    Domain Network Logon Service
    Security Mode and Master Browsers
    Common Errors
    '$' cannot be included in machine name
    Joining domain fails because of existing machine account
    The system can not log you on (C000019B)....
    The machine trust account not accessible
    Account disabled
    Domain Controller Unavailable
    Can not log onto domain member workstation after joining domain
    6. Backup Domain Control
    Features And Benefits
    Essential Background Information
    MS Windows NT4 Style Domain Control
    Active Directory Domain Control
    What qualifies a Domain Controller on the network?
    How does a Workstation find its domain controller?
    Backup Domain Controller Configuration
    Example Configuration
    Common Errors
    Machine Accounts keep expiring, what can I do?
    Can Samba be a Backup Domain Controller to an NT4 PDC?
    How do I replicate the smbpasswd file?
    Can I do this all with LDAP?
    7. Domain Membership
    Features and Benefits
    MS Windows Workstation/Server Machine Trust Accounts
    Manual Creation of Machine Trust Accounts
    Using NT4 Server Manager to Add Machine Accounts to the Domain
    "On-the-Fly" Creation of Machine Trust Accounts
    Making an MS Windows Workstation or Server a Domain Member
    Domain Member Server
    Joining an NT4 type Domain with Samba-3
    Why is this better than security = server?
    Samba ADS Domain Membership
    Setup your smb.conf
    Setup your /etc/krb5.conf
    Create the computer account
    Test your server setup
    Testing with smbclient
    Notes
    Common Errors
    Can Not Add Machine Back to Domain
    Adding Machine to Domain Fails
    8. Stand-Alone Servers
    Features and Benefits
    Background
    Example Configuration
    Reference Documentation Server
    Central Print Serving
    Common Errors
    9. MS Windows Network Configuration Guide
    Note

    Chapter 4. Server Types and Security Modes

    Andrew Tridgell

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    +

    Table of Contents

    4. Server Types and Security Modes
    Features and Benefits
    Server Types
    Samba Security Modes
    User Level Security
    Share Level Security
    Domain Security Mode (User Level Security)
    ADS Security Mode (User Level Security)
    Server Security (User Level Security)
    Password Checking
    Common Errors
    What Makes Samba a Server?
    What Makes Samba a Domain Controller?
    What Makes Samba a Domain Member?
    Constantly Losing Connections to Password Server
    5. Domain Control
    Features and Benefits
    Basics of Domain Control
    Domain Controller Types
    Preparing for Domain Control
    Domain Control Example Configuration
    Samba ADS Domain Control
    Domain and Network Logon Configuration
    Domain Network Logon Service
    Security Mode and Master Browsers
    Common Errors
    $ Cannot Be Included in Machine Name
    Joining Domain Fails Because of Existing Machine Account
    The System Cannot Log You On (C000019B)
    The Machine Trust Account Is Not Accessible
    Account Disabled
    Domain Controller Unavailable
    Cannot Log onto Domain Member Workstation After Joining Domain
    6. Backup Domain Control
    Features and Benefits
    Essential Background Information
    MS Windows NT4-style Domain Control
    LDAP Configuration Notes
    Active Directory Domain Control
    What Qualifies a Domain Controller on the Network?
    How does a Workstation find its Domain Controller?
    Backup Domain Controller Configuration
    Example Configuration
    Common Errors
    Machine Accounts Keep Expiring
    Can Samba Be a Backup Domain Controller to an NT4 PDC?
    How Do I Replicate the smbpasswd File?
    Can I Do This All with LDAP?
    7. Domain Membership
    Features and Benefits
    MS Windows Workstation/Server Machine Trust Accounts
    Manual Creation of Machine Trust Accounts
    Managing Domain Machine Accounts using NT4 Server Manager
    On-the-Fly Creation of Machine Trust Accounts
    Making an MS Windows Workstation or Server a Domain Member
    Domain Member Server
    Joining an NT4-type Domain with Samba-3
    Why Is This Better Than security = server?
    Samba ADS Domain Membership
    Configure smb.conf
    Configure /etc/krb5.conf
    Create the Computer Account
    Testing Server Setup
    Testing with smbclient
    Notes
    Sharing User ID Mappings between Samba Domain Members
    Common Errors
    Cannot Add Machine Back to Domain
    Adding Machine to Domain Fails
    I Can't Join a Windows 2003 PDC
    8. Stand-alone Servers
    Features and Benefits
    Background
    Example Configuration
    Reference Documentation Server
    Central Print Serving
    Common Errors
    9. MS Windows Network Configuration Guide
    Note

    Chapter 4. Server Types and Security Modes

    Andrew Tridgell

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    This chapter provides information regarding the types of server that Samba may be -configured to be. A Microsoft network administrator who wishes to migrate to or to -use Samba will want to know what, within a Samba context, terms familiar to MS Windows -administrator mean. This means that it is essential also to define how critical security -modes function BEFORE we get into the details of how to configure the server itself. +configured to be. A Microsoft network administrator who wishes to migrate to or +use Samba will want to know the meaning, within a Samba context, of terms familiar to MS Windows +administrator. This means that it is essential also to define how critical security +modes function before we get into the details of how to configure the server itself.

    The chapter provides an overview of the security modes of which Samba is capable -and how these relate to MS Windows servers and clients. +and how they relate to MS Windows servers and clients.

    -A question often asked is, "Why would I want to use Samba?" Most chapters contain a section +A question often asked is, “Why would I want to use Samba?” Most chapters contain a section that highlights features and benefits. We hope that the information provided will help to answer this question. Be warned though, we want to be fair and reasonable, so not all -features are positive towards Samba so the benefit may be on the side of our competition. -

    Features and Benefits

    +features are positive towards Samba. The benefit may be on the side of our competition. +

    Features and Benefits

    Two men were walking down a dusty road, when one suddenly kicked up a small red stone. It hurt his toe and lodged in his sandal. He took the stone out and cursed it with a passion -and fury fitting his anguish. The other looked at the stone and said, that is a garnet - I -can turn that into a precious gem and some day it will make a princess very happy! +and fury befitting his anguish. The other looked at the stone and said, “This is a garnet. +I can turn that into a precious gem and some day it will make a princess very happy!

    The moral of this tale: Two men, two very different perspectives regarding the same stone. Like it or not, Samba is like that stone. Treat it the right way and it can bring great -pleasure, but if you are forced upon it and have no time for its secrets then it can be +pleasure, but if you are forced to use it and have no time for its secrets, then it can be a source of discomfort.

    Samba started out as a project that sought to provide interoperability for MS Windows 3.x clients with a UNIX server. It has grown up a lot since its humble beginnings and now provides features and functionality fit for large scale deployment. It also has some warts. In sections -like this one we will tell of both. +like this one we tell of both.

    -So now, what are the benefits of features mentioned in this chapter? +So, what are the benefits of features mentioned in this chapter?

    • - Samba-3 can replace an MS Windows NT4 Domain Controller + Samba-3 can replace an MS Windows NT4 Domain Controller.

    • - Samba-3 offers excellent interoperability with MS Windows NT4 - style domains as well as natively with Microsoft Active - Directory domains. + Samba-3 offers excellent interoperability with MS Windows NT4-style + domains as well as natively with Microsoft Active Directory domains.

    • - Samba-3 permits full NT4 style Interdomain Trusts + Samba-3 permits full NT4-style Interdomain Trusts.

    • Samba has security modes that permit more flexible authentication than is possible with MS Windows NT4 Domain Controllers.

    • - Samba-3 permits use of multiple account database backends + Samba-3 permits use of multiple account database backends.

    • The account (password) database backends can be distributed and replicated using multiple methods. This gives Samba-3 greater flexibility than MS Windows NT4 and in many cases a significantly higher utility than Active Directory domains with MS Windows 200x. -

    Server Types

    Administrators of Microsoft networks often refer to three -different type of servers:

    • Domain Controller

      • Primary Domain Controller

      • Backup Domain Controller

      • ADS Domain Controller

    • Domain Member Server

      • Active Directory Domain Server

      • NT4 Style Domain Domain Server

    • Stand Alone Server

    +

    Server Types

    + +Administrators of Microsoft networks often refer to three +different type of servers:

    • Domain Controller

      • Primary Domain Controller
      • Backup Domain Controller
      • ADS Domain Controller
    • Domain Member Server

      • Active Directory Domain Server
      • NT4 Style Domain Domain Server
    • Stand-alone Server

    The chapters covering Domain Control, Backup Domain Control and Domain Membership provide pertinent information regarding Samba configuration for each of these server roles. The reader is strongly encouraged to become intimately familiar with the information presented. -

    Samba Security Modes

    -In this section the function and purpose of Samba's security +

    Samba Security Modes

    + + +In this section the function and purpose of Samba's security modes are described. An accurate understanding of how Samba implements each security mode as well as how to configure MS Windows clients for each mode will significantly reduce user complaints and administrator heartache.

    -In the SMB/CIFS networking world, there are only two types of security: USER Level -and SHARE Level. We refer to these collectively as security levels. In implementing these two security levels Samba provides flexibilities -that are not available with Microsoft Windows NT4 / 200x servers. Samba knows of five (5) -ways that allow the security levels to be implemented. In actual fact, Samba implements -SHARE Level security only one way, but has four ways of implementing -USER Level security. Collectively, we call the Samba implementations -Security Modes. These are: SHARE, USER, DOMAIN, -ADS, and SERVER -modes. They are documented in this chapter. -

    - A SMB server tells the client at startup what security level -it is running. There are two options: share level and -user level. Which of these two the client receives affects -the way the client then tries to authenticate itself. It does not directly affect -(to any great extent) the way the Samba server does security. This may sound strange, -but it fits in with the client/server approach of SMB. In SMB everything is initiated -and controlled by the client, and the server can only tell the client what is -available and whether an action is allowed. -

    User Level Security

    -We will describe user level security first, as it's simpler. -In user level security, the client will send a -session setup command directly after the protocol negotiation. -This contains a username and password. The server can either accept or reject that -username/password combination. Note that at this stage the server has no idea what +In the SMB/CIFS networking world, there are only two types of security: User Level +and Share Level. We refer to these collectively as security levels. +In implementing these two security levels, Samba provides flexibilities +that are not available with Microsoft Windows NT4/200x servers. In actual fact, Samba implements +Share Level security only one way, but has four ways of implementing +User Level security. Collectively, we call the Samba implementations +Security Modes. They are known as: SHARE, USER, +DOMAIN, ADS, and SERVER modes. +They are documented in this chapter. +

    +An SMB server tells the client at startup what security level it is running. There are two options: +Share Level and User Level. Which of these two the client receives affects the way the client then +tries to authenticate itself. It does not directly affect (to any great extent) the way the Samba +server does security. This may sound strange, but it fits in with the client/server approach of SMB. +In SMB everything is initiated and controlled by the client, and the server can only tell the client +what is available and whether an action is allowed. +

    User Level Security

    +We will describe User Level Security first, as its simpler. +In User Level Security, the client will send a +session setup request directly following protocol negotiation. +This request provides a username and password. The server can either accept or reject that +username/password combination. At this stage the server has no idea what share the client will eventually try to connect to, so it can't base the accept/reject on anything other than: -

    1. The username/password

    2. The name of the client machine

    +

    1. the username/password.

    2. the name of the client machine.

    If the server accepts the username/password then the client expects to be able to mount shares (using a tree connection) without specifying a password. It expects that all access rights will be as the username/password @@ -468,53 +451,57 @@ It is also possible for a client to send multiple ses requests. When the server responds, it gives the client a uid to use as an authentication tag for that username/password. The client can maintain multiple authentication contexts in this way (WinDD is an example of an application that does this). -

    Example Configuration

    -The smb.conf parameter that sets User Level Security is: +

    Example Configuration

    +The smb.conf parameter that sets user level security is:

    security = user

    -This is the default setting since samba-2.2.x. -

    Share Level Security

    -Ok, now for share level security. In share level security, the client authenticates -itself separately for each share. It will send a password along with each -tree connection (share mount). It does not explicitly send a +This is the default setting since Samba-2.2.x. +

    Share Level Security

    +In Share Level security, the client authenticates +itself separately for each share. It sends a password along with each +tree connection (share mount). It does not explicitly send a username with this operation. The client expects a password to be associated with each share, independent of the user. This means that Samba has to work out what username the client probably wants to use. It is never explicitly sent the username. Some commercial SMB servers such as NT actually associate passwords directly with -shares in share level security, but Samba always uses the unix authentication scheme +shares in Share Level security, but Samba always uses the UNIX authentication scheme where it is a username/password pair that is authenticated, not a share/password pair.

    -To gain understanding of the MS Windows networking parallels to this, one should think +To understand the MS Windows networking parallels, one should think in terms of MS Windows 9x/Me where one can create a shared folder that provides read-only or full access, with or without a password.

    -Many clients send a session setup even if the server is in share -level security. They normally send a valid username but no password. Samba records -this username in a list of possible usernames. When the client -then does a tree connection it also adds to this list the name +Many clients send a session setup even if the server is in Share Level security. They +normally send a valid username but no password. Samba records this username in a list +of possible usernames. When the client then does a tree connection it also adds to this list the name of the share they try to connect to (useful for home directories) and any users -listed in the user smb.conf line. The password is then checked -in turn against these possible usernames. If a match is found +listed in the user parameter in the smb.conf file. +The password is then checked in turn against these possible usernames. If a match is found then the client is authenticated as that user. -

    Example Configuration

    -The smb.conf parameter that sets Share Level Security is: +

    Example Configuration

    +The smb.conf parameter that sets Share Level security is:

    security = share

    -Please note that there are reports that recent MS Windows clients do not like to work -with share mode security servers. You are strongly discouraged from using share level security. -

    Domain Security Mode (User Level Security)

    -When Samba is operating in security = domain mode, -the Samba server has a domain security trust account (a machine account) and will cause -all authentication requests to be passed through to the domain controllers. -

    Example Configuration

    +There are reports that recent MS Windows clients do not like to work +with share mode security servers. You are strongly discouraged from using Share Level security. +

    Domain Security Mode (User Level Security)

    + +When Samba is operating in security = domain mode, +the Samba server has a domain security trust account (a machine account) and causes +all authentication requests to be passed through to the Domain Controllers. +In other words, this configuration makes the Samba server a Domain Member server. +

    Example Configuration

    Samba as a Domain Member Server

    + This method involves addition of the following parameters in the smb.conf file:

    security = domain
    workgroup = MIDEARTH

    In order for this method to work, the Samba server needs to join the MS Windows NT security domain. This is done as follows: -

    1. On the MS Windows NT domain controller, using + + +

      1. On the MS Windows NT Domain Controller, using the Server Manager, add a machine account for the Samba server. -

      2. Next, on the UNIX/Linux system execute:

        root# net rpc join -U administrator%password

      Note

      -Samba-2.2.4 and later can auto-join a Windows NT4 style Domain just by executing: +

    2. On the UNIX/Linux system execute:

      root# net rpc join -U administrator%password

    Note

    +Samba-2.2.4 and later can auto-join a Windows NT4-style Domain just by executing:

     root# smbpasswd -j DOMAIN_NAME -r PDC_NAME \
     	 -U Administrator%password
    @@ -529,97 +516,97 @@ It is not necessary with Samba-3 to specify the DOMAI
     

    Use of this mode of authentication does require there to be a standard UNIX account for each user in order to assign a UID once the account has been authenticated by -the remote Windows DC. This account can be blocked to prevent logons by clients other than +the remote Windows DC. This account can be blocked to prevent logons by clients other than MS Windows through means such as setting an invalid shell in the /etc/passwd entry.

    An alternative to assigning UIDs to Windows users on a Samba member server is -presented in the chapter about winbind. +presented in .

    - For more information of being a domain member, see the chapter about domain membership. -

    ADS Security Mode (User Level Security)

    -Both Samba 2.2 and 3.0 can join an Active Directory domain. This is +For more information regarding Domain Membership, see . +

    ADS Security Mode (User Level Security)

    +Both Samba-2.2, and Samba-3 can join an Active Directory domain. This is possible if the domain is run in native mode. Active Directory in -native mode perfectly allows NT4-style domain members. This is contrary to -popular belief. The only thing that Active Directory in native mode -prohibits is Backup Domain Controllers running NT4. +native mode perfectly allows NT4-style Domain Members. This is contrary to +popular belief. Active Directory in native mode prohibits only the use of +Backup Domain Controllers running MS Windows NT4.

    If you are using Active Directory, starting with Samba-3 you can join as a native AD member. Why would you want to do that? Your security policy might prohibit the use of NT-compatible authentication protocols. All your machines are running Windows 2000 -and above and all use Kerberos. In this case Samba as a NT4-style +and above and all use Kerberos. In this case Samba as an NT4-style domain would still require NT-compatible authentication data. Samba in AD-member mode can accept Kerberos tickets. -

    Example Configuration

    realm = your.kerberos.REALM
    security = ADS

    +

    Example Configuration

    realm = your.kerberos.REALM
    security = ADS

    The following parameter may be required: -

    ads server = your.kerberos.server

    -Please refer to the chapter on domain membership +

    password server = your.kerberos.server

    +Please refer to and for more information regarding this configuration option. -

    Server Security (User Level Security)

    -Server security mode is a left over from the time when Samba was not capable of acting -as a domain member server. It is highly recommended NOT to use this feature. Server -security mode has many draw backs. The draw backs include: -

    • Potential Account Lockout on MS Windows NT4/200x password servers

    • Lack of assurance that the password server is the one specified

    • Does not work with Winbind, particularly needed when storing profiles remotely

    • This mode may open connections to the password server, and keep them open for extended periods.

    • Security on the Samba server breaks badly when the remote password server suddenly shuts down

    • With this mode there is NO security account in the domain that the password server belongs to for the Samba server.

    -In server security mode the Samba server reports to the client that it is in user level -security. The client then does a session setup as described earlier. +

    Server Security (User Level Security)

    +Server Security Mode is left over from the time when Samba was not capable of acting +as a Domain Member server. It is highly recommended not to use this feature. Server +security mode has many drawbacks that include: +

    • Potential Account Lockout on MS Windows NT4/200x password servers.

    • Lack of assurance that the password server is the one specified.

    • Does not work with Winbind, which is particularly needed when storing profiles remotely.

    • This mode may open connections to the password server, and keep them open for extended periods.

    • Security on the Samba server breaks badly when the remote password server suddenly shuts down.

    • With this mode there is NO security account in the domain that the password server belongs to for the Samba server.

    +In Server Security Mode the Samba server reports to the client that it is in User Level +security. The client then does a session setup as described earlier. The Samba server takes the username/password that the client sends and attempts to login to the -password server by sending exactly the same username/password that -it got from the client. If that server is in user level security and accepts the password, -then Samba accepts the clients connection. This allows the Samba server to use another SMB -server as the password server. +password server by sending exactly the same username/password that +it got from the client. If that server is in User Level Security and accepts the password, +then Samba accepts the client's connection. This allows the Samba server to use another SMB +server as the password server.

    -You should also note that at the very start of all this, where the server tells the client +You should also note that at the start of all this where the server tells the client what security level it is in, it also tells the client if it supports encryption. If it -does then it supplies the client with a random cryptkey. The client will then send all +does, it supplies the client with a random cryptkey. The client will then send all passwords in encrypted form. Samba supports this type of encryption by default.

    -The parameter security = server means that Samba reports to clients that +The parameter security = server means that Samba reports to clients that it is running in user mode but actually passes off all authentication requests to another user mode server. This requires an additional -parameter password server that points to the real authentication server. -That real authentication server can be another Samba server or can be a Windows NT server, -the later natively capable of encrypted password support. +parameter password server that points to the real authentication server. +The real authentication server can be another Samba server, or it can be a Windows NT server, +the latter being natively capable of encrypted password support.

    Note

    -When Samba is running in server security mode it is essential that +When Samba is running in Server Security Mode it is essential that the parameter password server is set to the precise NetBIOS machine -name of the target authentication server. Samba can NOT determine this from NetBIOS name -lookups because the choice of the target authentication server is arbitrary and can not +name of the target authentication server. Samba cannot determine this from NetBIOS name +lookups because the choice of the target authentication server is arbitrary and cannot be determined from a domain name. In essence, a Samba server that is in -server security mode is operating in what used to be known as +Server Security Mode is operating in what used to be known as workgroup mode. -

    Example Configuration

    -Using MS Windows NT as an authentication server +

    Example Configuration

    +Using MS Windows NT as an Authentication Server

    This method involves the additions of the following parameters in the smb.conf file:

    encrypt passwords = Yes
    security = server
    password server = "NetBIOS_name_of_a_DC"

    -There are two ways of identifying whether or not a username and password pair was valid. +There are two ways of identifying whether or not a username and password pair is valid. One uses the reply information provided as part of the authentication messaging process, the other uses just an error code.

    -The down-side of this mode of configuration is the fact that for security reasons Samba +The downside of this mode of configuration is the fact that for security reasons Samba will send the password server a bogus username and a bogus password and if the remote server fails to reject the username and password pair then an alternative mode of identification of validation is used. Where a site uses password lock out after a certain number of failed authentication attempts this will result in user lockouts.

    -Use of this mode of authentication does require there to be a standard UNIX account -for the user, though this account can be blocked to prevent logons by non-SMB/CIFS clients. -

    Password checking

    +Use of this mode of authentication requires a standard UNIX account for the user. +This account can be blocked to prevent logons by non-SMB/CIFS clients. +

    Password Checking

    MS Windows clients may use encrypted passwords as part of a challenge/response -authentication model (a.k.a. NTLMv1 and NTLMv2) or alone, or clear text strings for simple -password based authentication. It should be realized that with the SMB protocol, -the password is passed over the network either in plain text or encrypted, but +authentication model (a.k.a. NTLMv1 and NTLMv2) or alone, or cleartext strings for simple +password-based authentication. It should be realized that with the SMB protocol, +the password is passed over the network either in plain-text or encrypted, but not both in the same authentication request.

    When encrypted passwords are used, a password that has been entered by the user is encrypted in two ways: -

    • An MD4 hash of the UNICODE of the password - string. This is known as the NT hash. +

      • An MD4 hash of the unicode of the password + string. This is known as the NT hash.

      • The password is converted to upper case, - and then padded or truncated to 14 bytes. This string is + and then padded or truncated to 14 bytes. This string is then appended with 5 bytes of NULL characters and split to - form two 56 bit DES keys to encrypt a "magic" 8 byte value. + form two 56-bit DES keys to encrypt a “magic” 8-byte value. The resulting 16 bytes form the LanMan hash.

      MS Windows 95 pre-service pack 1, MS Windows NT versions 3.x and version 4.0 @@ -633,324 +620,340 @@ connection that has been dropped, the client re-establishes the connection using a cached copy of the password.

      When Microsoft changed the default password mode, support was dropped for caching -of the plain text password. This means that when the registry parameter is changed -to re-enable use of plain text passwords it appears to work, but when a dropped -service connection mapping attempts to revalidate it will fail if the remote -authentication server does not support encrypted passwords. This means that it -is definitely not a good idea to re-enable plain text password support in such clients. -

      -The following parameters can be used to work around the issue of Windows 9x clients -upper casing usernames and password before transmitting them to the SMB server -when using clear text authentication. +of the plain-text password. This means that when the registry parameter is changed +to re-enable use of plain-text passwords it appears to work, but when a dropped +service connection mapping attempts to revalidate, this will fail if the remote +authentication server does not support encrypted passwords. It is definitely not +a good idea to re-enable plain-text password support in such clients. +

      +The following parameters can be used to work around the issue of Windows 9x/Me clients +upper-casing usernames and passwords before transmitting them to the SMB server +when using cleartext authentication:

      password level = integer
      username level = integer

      -By default Samba will lower case the username before attempting to lookup the user -in the database of local system accounts. Because UNIX usernames conventionally -only contain lower-case character, the username level parameter +By default Samba will convert to lower case the username before attempting to lookup the user +in the database of local system accounts. Because UNIX usernames conventionally +only contain lower-case characters, the username level parameter is rarely needed.

      However, passwords on UNIX systems often make use of mixed-case characters. -This means that in order for a user on a Windows 9x client to connect to a Samba -server using clear text authentication, the password level -must be set to the maximum number of upper case letters which could -appear in a password. Note that if the server OS uses the traditional DES version -of crypt(), a password level of 8 will result in case -insensitive passwords as seen from Windows users. This will also result in longer +This means that in order for a user on a Windows 9x/Me client to connect to a Samba +server using cleartext authentication, the password level +must be set to the maximum number of upper case letters that could +appear in a password. Note that if the server OS uses the traditional DES version +of crypt(), a password level of 8 will result in case +insensitive passwords as seen from Windows users. This will also result in longer login times as Samba has to compute the permutations of the password string and try them one by one until a match is located (or all combinations fail).

      The best option to adopt is to enable support for encrypted passwords wherever -Samba is used. Most attempts to apply the registry change to re-enable plain text +Samba is used. Most attempts to apply the registry change to re-enable plain-text passwords will eventually lead to user complaints and unhappiness. -

    Common Errors

    -We all make mistakes. It is Ok to make mistakes, so long as they are made in the right places -and at the right time. A mistake that causes lost productivity is seldom tolerated. A mistake +

    Common Errors

    +We all make mistakes. It is okay to make mistakes, as long as they are made in the right places +and at the right time. A mistake that causes lost productivity is seldom tolerated, however a mistake made in a developmental test lab is expected.

    Here we look at common mistakes and misapprehensions that have been the subject of discussions -on the Samba mailing lists. Many of these are avoidable by doing you homework before attempting -a Samba implementation. Some are the result of misunderstanding of the English language. The -English language has many turns of phrase that are potentially vague and may be highly confusing +on the Samba mailing lists. Many of these are avoidable by doing your homework before attempting +a Samba implementation. Some are the result of a misunderstanding of the English language. The +English language, which has many phrases that are potentially vague and may be highly confusing to those for whom English is not their native tongue. -

    What makes Samba a SERVER?

    -To some the nature of the Samba security mode is very obvious, but entirely -wrong all the same. It is assumed that security = server means that Samba -will act as a server. Not so! See above - this setting means that Samba will try -to use another SMB server as its source of user authentication alone. -

    What makes Samba a Domain Controller?

    -The smb.conf parameter security = domain does NOT really make Samba behave -as a Domain Controller! This setting means we want Samba to be a domain member! -

    What makes Samba a Domain Member?

    -Guess! So many others do. But whatever you do, do NOT think that security = user -makes Samba act as a domain member. Read the manufacturers manual before the warranty expires! See -the chapter about domain membership for more information. -

    Constantly Losing Connections to Password Server

    +

    What Makes Samba a Server?

    +To some the nature of the Samba security mode is obvious, but entirely +wrong all the same. It is assumed that security = server means that Samba +will act as a server. Not so! This setting means that Samba will try +to use another SMB server as its source for user authentication alone. +

    What Makes Samba a Domain Controller?

    +The smb.conf parameter security = domain does not really make Samba behave +as a Domain Controller. This setting means we want Samba to be a Domain Member. +

    What Makes Samba a Domain Member?

    +Guess! So many others do. But whatever you do, do not think that security = user +makes Samba act as a Domain Member. Read the manufacturer's manual before the warranty expires. See + for more information. +

    Constantly Losing Connections to Password Server

    -Why does server_validate() simply give up rather than re-establishing its connection to the +Why does server_validate() simply give up rather than re-establish its connection to the password server? Though I am not fluent in the SMB protocol, perhaps the cluster server process passes along to its client workstation the session key it receives from the password server, which means the password hashes submitted by the client would not work on a subsequent -connection, whose session key would be different. So server_validate() must give up.” +connection whose session key would be different. So server_validate() must give up.”

    - Indeed. That's why security = server is at best a nasty hack. Please use security = domain. -security = server mode is also known as pass-through authentication. -

    Chapter 5. Domain Control

    John H. Terpstra

    Samba Team

    Gerald (Jerry) Carter

    Samba Team

    David Bannon

    Samba Team

    Guenther Deschner

    LDAP updates

    There are many who approach MS Windows networking with incredible misconceptions. -That's OK, because it gives the rest of us plenty of opportunity to be of assistance. +That's okay, because it gives the rest of us plenty of opportunity to be of assistance. Those who really want help would be well advised to become familiar with information that is already available.

    -The reader is advised NOT to tackle this section without having first understood +The reader is advised not to tackle this section without having first understood and mastered some basics. MS Windows networking is not particularly forgiving of misconfiguration. Users of MS Windows networking are likely to complain of persistent niggles that may be caused by a broken network configuration. -To a great many people however, MS Windows networking starts with a domain controller -that in some magical way is expected to solve all ills. -

    Figure 5.1. An Example Domain

    An Example Domain

    +To a great many people, however, MS Windows networking starts with a Domain Controller +that in some magical way is expected to solve all network operational ills. +

    +The diagram in shows a typical MS Windows Domain Security +network environment. Workstations A, B and C are representative of many physical MS Windows +network clients. +

    Figure 5.1. An Example Domain.

    An Example Domain.

    From the Samba mailing list one can readily identify many common networking issues. If you are not clear on the following subjects, then it will do much good to read the sections of this HOWTO that deal with it. These are the most common causes of MS Windows networking problems: -

    • Basic TCP/IP configuration

    • NetBIOS name resolution

    • Authentication configuration

    • User and Group configuration

    • Basic File and Directory Permission Control in UNIX/Linux

    • Understanding of how MS Windows clients interoperate in a network - environment

    +

    • Basic TCP/IP configuration.

    • NetBIOS name resolution.

    • Authentication configuration.

    • User and group configuration.

    • Basic file and directory permission control in UNIX/Linux.

    • Understanding how MS Windows clients interoperate in a network + environment.

    Do not be put off; on the surface of it MS Windows networking seems so simple that anyone can do it. In fact, it is not a good idea to set up an MS Windows network with inadequate training and preparation. But let's get our first indelible principle out of the -way: It is perfectly OK to make mistakes! In the right place and at -the right time, mistakes are the essence of learning. It is very much -not ok to make mistakes that cause loss of productivity and impose an avoidable financial -burden on an organisation. +way: It is perfectly okay to make mistakes! In the right place and at +the right time, mistakes are the essence of learning. It is very much not okay to make +mistakes that cause loss of productivity and impose an avoidable financial burden on an +organization.

    -Where is the right place to make mistakes? Only out of harm's way! If you are going to -make mistakes, then please do this on a test network, away from users and in such a way as +Where is the right place to make mistakes? Only out of harm's way. If you are going to +make mistakes, then please do it on a test network, away from users and in such a way as to not inflict pain on others. Do your learning on a test network. -

    Features and Benefits

    -What is the key benefit of Microsoft Domain security? +

    Features and Benefits

    + +What is the key benefit of Microsoft Domain Security?

    -In a word, Single Sign On, or SSO for short. To many, this is the holy -grail of MS Windows NT and beyond networking. SSO allows users in a well designed network +In a word, Single Sign On, or SSO for short. To many, this is the Holy +Grail of MS Windows NT and beyond networking. SSO allows users in a well-designed network to log onto any workstation that is a member of the domain that their user account is in (or in a domain that has an appropriate trust relationship with the domain they are visiting) -and they will be able to log onto the network and access resources (shares, files, and printers) +and they will be able to log onto the network and access resources (shares, files and printers) as if they are sitting at their home (personal) workstation. This is a feature of the Domain -security protocols. +Security protocols.

    -The benefits of Domain security are available to those sites that deploy a Samba PDC. + +The benefits of Domain Security are available to those sites that deploy a Samba PDC. A Domain provides a unique network security identifier (SID). Domain user and group security identifiers are comprised of the network SID plus a relative identifier (RID) that is unique to the account. User and Group SIDs (the network SID plus the RID) can be used to create Access Control Lists (ACLs) attached to network resources to provide organizational access control. UNIX systems -know only of local security identifiers. +recognize only local security identifiers.

    Note

    -Network clients of an MS Windows Domain security environment must be Domain members to be -able to gain access to the advanced features provided. Domain membership involves more than just +Network clients of an MS Windows Domain Security Environment must be Domain Members to be +able to gain access to the advanced features provided. Domain Membership involves more than just setting the workgroup name to the Domain name. It requires the creation of a Domain trust account -for the workstation (called a machine account). Please refer to the chapter on -setting up samba as a domain member for more information. +for the workstation (called a machine account). Refer to +for more information.

    The following functionalities are new to the Samba-3 release:

    • - Windows NT4 domain trusts + Windows NT4 domain trusts.

    • + Adding users via the User Manager for Domains. This can be done on any MS Windows - client using the Nexus toolkit that is available from Microsoft's web site. + client using the Nexus.exe toolkit that is available from Microsoft's Web site. Samba-3 supports the use of the Microsoft Management Console for user management.

    • Introduces replaceable and multiple user account (authentication) - back ends. In the case where the back end is placed in an LDAP database, - Samba-3 confers the benefits of a back end that can be distributed, replicated, + backends. In the case where the backend is placed in an LDAP database, + Samba-3 confers the benefits of a backend that can be distributed, replicated and is highly scalable.

    • - Implements full Unicode support. This simplifies cross locale internationalisation + Implements full Unicode support. This simplifies cross locale internationalization support. It also opens up the use of protocols that Samba-2.2.x had but could not use due to the need to fully support Unicode.

    -The following functionalities are NOT provided by Samba-3: +The following functionalities are not provided by Samba-3:

    • + + SAM replication with Windows NT4 Domain Controllers - (i.e. a Samba PDC and a Windows NT BDC or vice versa). This means samba + (i.e., a Samba PDC and a Windows NT BDC or vice versa). This means Samba cannot operate as a BDC when the PDC is Microsoft-based or - replicate account data to Windows-BDC's. + replicate account data to Windows BDCs.

    • - Acting as a Windows 2000 Domain Controller (i.e. Kerberos and - Active Directory) - In point of fact, Samba-3 DOES have some + Acting as a Windows 2000 Domain Controller (i.e., Kerberos and + Active Directory). In point of fact, Samba-3 does have some Active Directory Domain Control ability that is at this time - purely experimental AND that is certain - to change as it becomes a fully supported feature some time - during the Samba-3 (or later) life cycle. However, Active Directory is - more then just SMB - it's also LDAP, Kerberos, DHCP and other protocols - (with proprietary extensions, of course). + purely experimental that is certain to change as it becomes a + fully supported feature some time during the Samba-3 (or later) + life cycle. However, Active Directory is more then just SMB + it's also LDAP, Kerberos, DHCP, and other protocols (with proprietary + extensions, of course). +

    • + The Windows 200x/XP MMC (Computer Management) Console can not be used + to manage a Samba-3 server. For this you can use only the MS Windows NT4 + Domain Server manager and the MS Windows NT4 Domain User Manager. Both are + part of the SVRTOOLS.EXE package mentioned later.

    -Windows 9x / Me / XP Home clients are not true members of a domain for reasons outlined -in this chapter. The protocol for support of Windows 9x / Me style network (domain) logons -is completely different from NT4 / Win2k type domain logons and has been officially supported +Windows 9x/Me/XP Home clients are not true members of a domain for reasons outlined +in this chapter. The protocol for support of Windows 9x/Me style network (domain) logons +is completely different from NT4/Windows 200x type domain logons and has been officially supported for some time. These clients use the old LanMan Network Logon facilities that are supported in Samba since approximately the Samba-1.9.15 series.

    -Samba-3 has an implementation of group mapping between Windows NT groups +Samba-3 implements group mapping between Windows NT groups and UNIX groups (this is really quite complicated to explain in a short space). This is -discussed more fully in the chapter on group mapping. +discussed more fully in .

    + Samba-3, like an MS Windows NT4 PDC or a Windows 200x Active Directory, needs to store -user and machine trust account information in a suitable backend data store. -Refer to the section on machine trust accounts. With Samba-3 there can be multiple -back-ends for this. A complete discussion of account database backends can be found in -the chapter on Account Information Databases. -

    Basics of Domain Control

    +user and Machine Trust Account information in a suitable backend datastore. +Refer to . With Samba-3 there can be multiple +backends for this. A complete discussion of account database backends can be found in +. +

    Basics of Domain Control

    Over the years, public perceptions of what Domain Control really is has taken on an almost mystical nature. Before we branch into a brief overview of Domain Control, -there are three basic types of domain controllers: -

    Domain Controller Types

    • Primary Domain Controller

    • Backup Domain Controller

    • ADS Domain Controller

    -The Primary Domain Controller or PDC plays an important role in the MS -Windows NT4. In Windows 200x Domain Control architecture this role is held by domain controllers. -There is folk lore that dictates that because of it's role in the MS Windows -network, the domain controllers should be the most powerful and most capable machine in the network. -As strange as it may seem to say this here, good over all network performance dictates that -the entire infrastructure needs to be balanced. It is advisable to invest more in Stand-Alone -(or Domain Member) servers than in the domain controllers. -

    -In the case of MS Windows NT4 style domains, it is the PDC that initiates a new Domain Control database. -This forms a part of the Windows registry called the SAM (Security Account Manager). It plays a key -part in NT4 type domain user authentication and in synchronisation of the domain authentication +there are three basic types of Domain Controllers. +

    Domain Controller Types

    • Primary Domain Controller

    • Backup Domain Controller

    • ADS Domain Controller

    +The Primary Domain Controller or PDC plays an important role in MS +Windows NT4. In Windows 200x Domain Control architecture, this role is held by Domain Controllers. +Folklore dictates that because of its role in the MS Windows +network, the Domain Controller should be the most powerful and most capable machine in the network. +As strange as it may seem to say this here, good overall network performance dictates that +the entire infrastructure needs to be balanced. It is advisable to invest more in Stand-alone +(Domain Member) servers than in the Domain Controllers. +

    + +In the case of MS Windows NT4-style domains, it is the PDC that initiates a new Domain Control database. +This forms a part of the Windows registry called the Security Account Manager (SAM). It plays a key +part in NT4-type domain user authentication and in synchronization of the domain authentication database with Backup Domain Controllers.

    -With MS Windows 200x Server based Active Directory domains, one domain controller initiates a potential -hierarchy of domain controllers, each with their own area of delegated control. The master domain -controller has the ability to override any down-stream controller, but a down-line controller has -control only over it's down-line. With Samba-3 this functionality can be implemented using an -LDAP based user and machine account back end. +With MS Windows 200x Server-based Active Directory domains, one Domain Controller initiates a potential +hierarchy of Domain Controllers, each with their own area of delegated control. The master domain +controller has the ability to override any downstream controller, but a downline controller has +control only over its downline. With Samba-3, this functionality can be implemented using an +LDAP-based user and machine account backend.

    -New to Samba-3 is the ability to use a back-end database that holds the same type of data as -the NT4 style SAM (Security Account Manager) database (one of the registry files). -[1] +New to Samba-3 is the ability to use a backend database that holds the same type of data as +the NT4-style SAM database (one of the registry files)[1].

    The Backup Domain Controller or BDC plays a key role in servicing network authentication requests. The BDC is biased to answer logon requests in preference to the PDC. -On a network segment that has a BDC and a PDC the BDC will be most likely to service network +On a network segment that has a BDC and a PDC, the BDC will most likely service network logon requests. The PDC will answer network logon requests when the BDC is too busy (high load). -A BDC can be promoted to a PDC. If the PDC is on line at the time that a BDC is promoted to -PDC, the previous PDC is automatically demoted to a BDC. With Samba-3 this is NOT an automatic -operation; the PDC and BDC must be manually configured and changes need to be made likewise. +A BDC can be promoted to a PDC. If the PDC is online at the time that a BDC is promoted to +PDC, the previous PDC is automatically demoted to a BDC. With Samba-3, this is not an automatic +operation; the PDC and BDC must be manually configured and changes also need to be made.

    -With MS Windows NT4, it is an install time decision what type of machine the server will be. -It is possible to change the promote a BDC to a PDC and vice versa only, but the only way -to convert a domain controller to a domain member server or a stand-alone server is to +With MS Windows NT4, a decision is made at installation to determine what type of machine the server will be. +It is possible to promote a BDC to a PDC and vice versa. The only way +to convert a Domain Controller to a Domain Member server or a Stand-alone Server is to reinstall it. The install time choices offered are: -

    • Primary Domain Controller - The one that seeds the domain SAM

    • Backup Domain Controller - One that obtains a copy of the domain SAM

    • Domain Member Server - One that has NO copy of the domain SAM, rather it obtains authentication from a Domain Controller for all access controls.

    • Stand-Alone Server - One that plays NO part is SAM synchronisation, has it's own authentication database and plays no role in Domain security.

    -With MS Windows 2000 the configuration of domain control is done after the server has been +

    • Primary Domain Controller the one that seeds the domain SAM.

    • Backup Domain Controller one that obtains a copy of the domain SAM.

    • Domain Member Server one that has no copy of the domain SAM, rather it obtains authentication from a Domain Controller for all access controls.

    • Stand-alone Server one that plays no part is SAM synchronization, has its own authentication database and plays no role in Domain Security.

    +With MS Windows 2000, the configuration of Domain Control is done after the server has been installed. Samba-3 is capable of acting fully as a native member of a Windows 200x server Active Directory domain.

    -New to Samba-3 is the ability to function fully as an MS Windows NT4 style Domain Controller, -excluding the SAM replication components. However, please be aware that Samba-3 support the -MS Windows 200x domain control protocols also. + +New to Samba-3 is the ability to function fully as an MS Windows NT4-style Domain Controller, +excluding the SAM replication components. However, please be aware that Samba-3 also supports the +MS Windows 200x Domain Control protocols.

    At this time any appearance that Samba-3 is capable of acting as an Domain Controller in native ADS mode is limited and experimental in nature. -This functionality should not be used until the Samba-Team offers formal support for it. +This functionality should not be used until the Samba Team offers formal support for it. At such a time, the documentation will be revised to duly reflect all configuration and management requirements. Samba can act as a NT4-style DC in a Windows 2000/XP environment. However, there are certain compromises: -

    • No machine policy files

    • No Group Policy Objects

    • No synchronously executed AD logon scripts

    • Can't use ANY Active Directory management tools to manage users and machines

    • Registry changes tattoo the main registry, while with AD they do NOT. ie: Leave permanent changes in effect

    • Without AD you can not peprform the function of exporting specific applications to specific users or groups

    -

    Preparing for Domain Control

    -There are two ways that MS Windows machines may interact with each other, with other servers, -and with Domain Controllers: Either as Stand-Alone systems, more commonly +

    • No machine policy files.
    • No Group Policy Objects.
    • No synchronously executed AD logon scripts.
    • Can't use Active Directory management tools to manage users and machines.
    • Registry changes tattoo the main registry, while with AD they do not leave permanent changes in effect.
    • Without AD you cannot perform the function of exporting specific applications to specific users or groups.

    +

    Preparing for Domain Control

    +There are two ways that MS Windows machines may interact with each other, with other servers +and with Domain Controllers: either as Stand-alone systems, more commonly called Workgroup members, or as full participants in a security system, more commonly called Domain members.

    -It should be noted that Workgroup membership involve no special configuration -other than the machine being configured so that the network configuration has a commonly used name -for it's workgroup entry. It is not uncommon for the name WORKGROUP to be used for this. With this -mode of configuration there are NO machine trust accounts and any concept of membership as such -is limited to the fact that all machines appear in the network neighbourhood to be logically -grouped together. Again, just to be clear: workgroup mode does not involve any security machine +It should be noted that Workgroup membership involves no special configuration +other than the machine being configured so the network configuration has a commonly used name +for its workgroup entry. It is not uncommon for the name WORKGROUP to be used for this. With this +mode of configurationi, there are no Machine Trust Accounts and any concept of membership as such +is limited to the fact that all machines appear in the network neighborhood to be logically +grouped together. Again, just to be clear: workgroup mode does not involve security machine accounts.

    -Domain member machines have a machine account in the Domain accounts database. A special procedure -must be followed on each machine to affect Domain membership. This procedure, which can be done -only by the local machine Administrator account, will create the Domain machine account (if -if does not exist), and then initializes that account. When the client first logs onto the +Domain Member machines have a machine account in the Domain accounts database. A special procedure +must be followed on each machine to effect Domain Membership. This procedure, which can be done +only by the local machine Administrator account, will create the Domain machine account (if it does +not exist), and then initializes that account. When the client first logs onto the Domain it triggers a machine password change.

    Note

    -When running a Domain all MS Windows NT / 200x / XP Professional clients should be configured -as full Domain Members - IF A SECURE NETWORK IS WANTED. If the machine is NOT made a member of the -Domain, then it will operate like a workgroup (stand-alone) machine. Please refer to -the chapter on domain membership for information regarding HOW to make your MS Windows clients Domain members. +When Samba is configured as a Domain Controller, secure network operation demands that +all MS Windows NT4/200x/XP Professional clients should be configured as Domain Members. +If a machine is not made a member of the Domain, then it will operate like a workgroup +(Stand-alone) machine. Please refer to for +information regarding Domain Membership.

    -The following are necessary for configuring Samba-3 as an MS Windows NT4 style PDC for MS Windows -NT4 / 200x / XP clients. -

    • Configuration of basic TCP/IP and MS Windows Networking

    • Correct designation of the Server Role (security = user)

    • Consistent configuration of Name Resolution (See chapter on Network Browsing and on - Integrating Unix into Windows networks)

    • Domain logons for Windows NT4 / 200x / XP Professional clients

    • Configuration of Roaming Profiles or explicit configuration to force local profile usage

    • Configuration of Network/System Policies

    • Adding and managing domain user accounts

    • Configuring MS Windows client machines to become domain members

    -The following provisions are required to serve MS Windows 9x / Me Clients: -

    • Configuration of basic TCP/IP and MS Windows Networking

    • Correct designation of the Server Role (security = user)

    • Network Logon Configuration (Since Windows 9x / XP Home are not technically domain - members, they do not really participate in the security aspects of Domain logons as such)

    • Roaming Profile Configuration

    • Configuration of System Policy handling

    • Installation of the Network driver "Client for MS Windows Networks" and configuration - to log onto the domain

    • Placing Windows 9x / Me clients in user level security - if it is desired to allow - all client share access to be controlled according to domain user / group identities.

    • Adding and managing domain user accounts

    Note

    +The following are necessary for configuring Samba-3 as an MS Windows NT4-style PDC for MS Windows +NT4/200x/XP clients: +

    • Configuration of basic TCP/IP and MS Windows networking.

    • Correct designation of the Server Role (security = user).

    • Consistent configuration of Name Resolution[2].

    • Domain logons for Windows NT4/200x/XP Professional clients.

    • Configuration of Roaming Profiles or explicit configuration to force local profile usage.

    • Configuration of network/system policies.

    • Adding and managing domain user accounts.

    • Configuring MS Windows client machines to become Domain Members.

    +The following provisions are required to serve MS Windows 9x/Me clients: +

    • Configuration of basic TCP/IP and MS Windows networking.

    • Correct designation of the server role (security = user).

    • Network Logon Configuration (since Windows 9x/Me/XP Home are not technically domain + members, they do not really participate in the security aspects of Domain logons as such).

    • Roaming Profile Configuration.

    • Configuration of System Policy handling.

    • Installation of the network driver “Client for MS Windows Networks” and configuration + to log onto the domain.

    • Placing Windows 9x/Me clients in User Level Security if it is desired to allow + all client share access to be controlled according to domain user/group identities.

    • Adding and managing domain user accounts.

    Note

    Roaming Profiles and System/Network policies are advanced network administration topics -that are covered in the Profile Management and -Policy Management chapters of this document. However, these are not +that are covered in the and + chapters of this document. However, these are not necessarily specific to a Samba PDC as much as they are related to Windows NT networking concepts.

    A Domain Controller is an SMB/CIFS server that:

    • Registers and advertises itself as a Domain Controller (through NetBIOS broadcasts as well as by way of name registrations either by Mailslot Broadcasts over UDP broadcast, - to a WINS server over UDP unicast, or via DNS and Active Directory) + to a WINS server over UDP unicast, or via DNS and Active Directory).

    • - Provides the NETLOGON service (actually a collection of services that runs over - a number of protocols. These include the LanMan Logon service, the Netlogon service, - the Local Security Account service, and variations of them) + Provides the NETLOGON service. (This is actually a collection of services that runs over + mulitple protocols. These include the LanMan Logon service, the Netlogon service, + the Local Security Account service, and variations of them.)

    • - Provides a share called NETLOGON + Provides a share called NETLOGON.

    -For Samba to provide these is rather easy to configure. Each Samba Domain Controller must provide -the NETLOGON service which Samba calls the domain logons functionality -(after the name of the parameter in the smb.conf file). Additionally, one (1) server in a Samba-3 -Domain must advertise itself as the domain master browser[2]. This causes the Primary Domain Controller -to claim domain specific NetBIOS name that identifies it as a domain master browser for its given -domain/workgroup. Local master browsers in the same domain/workgroup on broadcast-isolated subnets -then ask for a complete copy of the browse list for the whole wide area network. Browser clients -will then contact their local master browser, and will receive the domain-wide browse list, +It is rather easy to configure Samba to provide these. Each Samba Domain Controller must provide +the NETLOGON service that Samba calls the domain logons functionality +(after the name of the parameter in the smb.conf file). Additionally, one server in a Samba-3 +Domain must advertise itself as the Domain Master Browser[3]. +This causes the Primary Domain Controller to claim a domain-specific NetBIOS name that identifies it as a +Domain Master Browser for its given domain or workgroup. Local master browsers in the same domain or workgroup on +broadcast-isolated subnets then ask for a complete copy of the browse list for the whole wide area network. +Browser clients will then contact their Local Master Browser, and will receive the domain-wide browse list, instead of just the list for their broadcast-isolated subnet. -

    Domain Control - Example Configuration

    +

    Domain Control Example Configuration

    The first step in creating a working Samba PDC is to understand the parameters necessary -in smb.conf. An example smb.conf for acting as a PDC can be found in the example -for being a PDC. +in smb.conf. An example smb.conf for acting as a PDC can be found in .

    -

    Example 5.1. smb.conf for being a PDC

    [global]
    netbios name = BELERIAND
    workgroup = MIDEARTH
    passdb backend = ldapsam, guest
    os level = 33
    preferred master = yes
    domain master = yes
    local master = yes
    security = user
    encrypt passwords = yes
    domain logons = yes
    logon path = \\%N\profiles\%u
    logon drive = H:
    logon home = \\homeserver\%u\winprofile
    logon script = logon.cmd
    [netlogon]
    path = /var/lib/samba/netlogon
    read only = yes
    write list = ntadmin
    [profiles]
    path = /var/lib/samba/profiles
    read only = no
    create mask = 0600
    directory mask = 0700

    +

    Example 5.1. smb.conf for being a PDC

    [global]
    netbios name = BELERIAND
    workgroup = MIDEARTH
    passdb backend = tdbsam
    os level = 33
    preferred master = yes
    domain master = yes
    local master = yes
    security = user
    domain logons = yes
    logon path = \\%N\profiles\%u
    logon drive = H:
    logon home = \\homeserver\%u\winprofile
    logon script = logon.cmd
    [netlogon]
    path = /var/lib/samba/netlogon
    read only = yes
    write list = ntadmin
    [profiles]
    path = /var/lib/samba/profiles
    read only = no
    create mask = 0600
    directory mask = 0700

    -The basic options shown above are explained as follows: -

    passdb backend

    +The basic options shown in are explained as follows: +

    passdb backend

    This contains all the user and group account information. Acceptable values for a PDC - are: smbpasswd, tdbsam, ldapsam. The 'guest' entry provides needed - default accounts.

    - Where is is intended to use backup domain controllers (BDCs) the only logical choice is - to use LDAP so that the passdb backend can be distributed. The tdbsam and smbpasswd files - can not effectively be distributed and therefore should not be used. -

    Domain Control Parameters

    + are: smbpasswd, tdbsam, and ldapsam. The “guest” entry provides + default accounts and is included by default, there is no need to add it explicitly.

    + Where use of backup Domain Controllers (BDCs) is intended, the only logical choice is + to use LDAP so the passdb backend can be distributed. The tdbsam and smbpasswd files + cannot effectively be distributed and therefore should not be used. +

    Domain Control Parameters

    The parameters os level, preferred master, domain master, security, - encrypt passwords, domain logons play a central role in assuring domain + encrypt passwords, and domain logons play a central role in assuring domain control and network logon support.

    - The os level must be set at or above a value of 32. A domain controller - must be the domain master browser, must be set in user mode security, - must support Microsoft compatible encrypted passwords, and must provide the network logon - service (domain logons). Encrypted passwords must be enabled, for more details on how - to do this, refer to the chapter on account information databases. -

    Environment Parameters

    - The parameters logon path, logon home, logon drive, logon script are + The os level must be set at or above a value of 32. A Domain Controller + must be the Domain Master Browser, must be set in user mode security, + must support Microsoft-compatible encrypted passwords, and must provide the network logon + service (domain logons). Encrypted passwords must be enabled. For more details on how + to do this, refer to . +

    Environment Parameters

    + The parameters logon path, logon home, logon drive, and logon script are environment support settings that help to facilitate client logon operations and that help to provide automated control facilities to ease network management overheads. Please refer to the man page information for these parameters. -

    NETLOGON Share

    - The NETLOGON share plays a central role in domain logon and domain membership support. - This share is provided on all Microsoft domain controllers. It is used to provide logon +

    NETLOGON Share

    + The NETLOGON share plays a central role in domain logon and Domain Membership support. + This share is provided on all Microsoft Domain Controllers. It is used to provide logon scripts, to store Group Policy files (NTConfig.POL), as well as to locate other common - tools that may be needed for logon processing. This is an essential share on a domain controller. -

    PROFILE Share

    - This share is used to store user desktop profiles. Eash user must have a directory at the root - of this share. This directory must be write enabled for the user and must be globally read enabled. - Samba-3 has a VFS module called 'fake_permissions' that may be installed on this share. This will - allow a Samba administrator to make the directory read only to everyone. Of course this is useful + tools that may be needed for logon processing. This is an essential share on a Domain Controller. +

    PROFILE Share

    + This share is used to store user desktop profiles. Each user must have a directory at the root + of this share. This directory must be write-enabled for the user and must be globally read-enabled. + Samba-3 has a VFS module called “fake_permissions” that may be installed on this share. This will + allow a Samba administrator to make the directory read-only to everyone. Of course this is useful only after the profile has been properly created.

    Note

    The above parameters make for a full set of parameters that may define the server's mode @@ -959,69 +962,69 @@ of operation. The following smb.conf parameters are th

    netbios name = BELERIAND
    workgroup = MIDEARTH
    domain logons = Yes
    domain master = Yes
    security = User

    The additional parameters shown in the longer listing above just makes for -more complete explanation. -

    Samba ADS Domain Control

    -Samba-3 is not, and can not act as, an Active Directory Server. It can not truly function as +a more complete explanation. +

    Samba ADS Domain Control

    +Samba-3 is not, and cannot act as, an Active Directory Server. It cannot truly function as an Active Directory Primary Domain Controller. The protocols for some of the functionality -the Active Directory Domain Controllers has been partially implemented on an experimental -only basis. Please do NOT expect Samba-3 to support these protocols. Do not depend -on any such functionality either now or in the future. The Samba-Team may remove these -experimental features or may change their behaviour. This is mentioned for the benefit of those -who have discovered secret capabilities in samba-3 and who have asked when this functionality will be -completed. The answer is: Maybe or maybe never! -

    -To be sure: Samba-3 is designed to provide most of the functionality that Microsoft Windows NT4 style -domain controllers have. Samba-3 does NOT have all the capabilities of Windows NT4, but it does have +of Active Directory Domain Controllers has been partially implemented on an experimental +only basis. Please do not expect Samba-3 to support these protocols. Do not depend +on any such functionality either now or in the future. The Samba Team may remove these +experimental features or may change their behavior. This is mentioned for the benefit of those +who have discovered secret capabilities in Samba-3 and who have asked when this functionality will be +completed. The answer is maybe or maybe never! +

    +To be sure, Samba-3 is designed to provide most of the functionality that Microsoft Windows NT4-style +Domain Controllers have. Samba-3 does not have all the capabilities of Windows NT4, but it does have a number of features that Windows NT4 domain contollers do not have. In short, Samba-3 is not NT4 and it -is not Windows Server 200x and it is not an Active Directory server. We hope this is plain and simple +is not Windows Server 200x, it is not an Active Directory server. We hope this is plain and simple enough for all to understand. -

    Domain and Network Logon Configuration

    +

    Domain and Network Logon Configuration

    The subject of Network or Domain Logons is discussed here because it forms an integral part of the essential functionality that is provided by a Domain Controller. -

    Domain Network Logon Service

    +

    Domain Network Logon Service

    All Domain Controllers must run the netlogon service (domain logons -in Samba). One Domain Controller must be configured with domain master = Yes -(the Primary Domain Controller); on ALL Backup Domain Controllers domain master = No +in Samba). One Domain Controller must be configured with domain master = Yes +(the Primary Domain Controller); on all Backup Domain Controllers domain master = No must be set. -

    Example Configuration

    Example 5.2. smb.conf for being a PDC

    [global]
    domain logons = Yes
    domain master = (Yes on PDC, No on BDCs)
    [netlogon]
    comment = Network Logon Service
    path = /var/lib/samba/netlogon
    guest ok = Yes
    browseable = No

    The Special Case of MS Windows XP Home Edition

    Note

    +

    Example Configuration

    Example 5.2. smb.conf for being a PDC

    [global]
    domain logons = Yes
    domain master = (Yes on PDC, No on BDCs)
    [netlogon]
    comment = Network Logon Service
    path = /var/lib/samba/netlogon
    guest ok = Yes
    browseable = No

    The Special Case of MS Windows XP Home Edition

    +To be completely clear: If you want MS Windows XP Home Edition to integrate with your +MS Windows NT4 or Active Directory Domain Security, understand it cannot be done. +The only option is to purchase the upgrade from MS Windows XP Home Edition to +MS Windows XP Professional. +

    Note

    MS Windows XP Home Edition does not have the ability to join any type of Domain -security facility. Unlike, MS Windows 9x / Me, MS Windows XP Home Edition also completely +Security facility. Unlike MS Windows 9x/Me, MS Windows XP Home Edition also completely lacks the ability to log onto a network.

    -To be completely clear: If you want MS Windows XP Home Edition to integrate with your -MS Windows NT4 or Active Directory Domain security understand - IT CAN NOT BE DONE. -Your only choice is to buy the upgrade pack from MS Windows XP Home Edition to -MS Windows XP Professional. -

    -Now that this has been said, please do NOT ask the mailing list, or email any of the -Samba-Team members with your questions asking how to make this work. It can't be done. +Now that this has been said, please do not ask the mailing list or email any of the +Samba Team members with your questions asking how to make this work. It can't be done. If it can be done, then to do so would violate your software license agreement with Microsoft, and we recommend that you do not do that. -

    The Special Case of Windows 9x / Me

    +

    The Special Case of Windows 9x/Me

    A domain and a workgroup are exactly the same in terms of network -browsing. The difference is that a distributable authentication +browsing. The difference is that a distributable authentication database is associated with a domain, for secure login access to a -network. Also, different access rights can be granted to users if they +network. Also, different access rights can be granted to users if they successfully authenticate against a domain logon server. Samba-3 does this -now in the same way that MS Windows NT/2K. +now in the same way as MS Windows NT/200x.

    The SMB client logging on to a domain has an expectation that every other server in the domain should accept the same authentication information. Network browsing functionality of domains and workgroups is identical and is explained in this documentation under the browsing discussions. -It should be noted, that browsing is totally orthogonal to logon support. +It should be noted that browsing is totally orthogonal to logon support.

    Issues related to the single-logon network model are discussed in this -section. Samba supports domain logons, network logon scripts, and user -profiles for MS Windows for workgroups and MS Windows 9X/ME clients +section. Samba supports domain logons, network logon scripts and user +profiles for MS Windows for workgroups and MS Windows 9X/ME clients, which are the focus of this section.

    When an SMB client in a domain wishes to logon, it broadcasts requests for a -logon server. The first one to reply gets the job, and validates its +logon server. The first one to reply gets the job, and validates its password using whatever mechanism the Samba administrator has installed. It is possible (but ill advised ) to create a domain where the user -database is not shared between servers, i.e. they are effectively workgroup -servers advertising themselves as participating in a domain. This +database is not shared between servers, i.e., they are effectively workgroup +servers advertising themselves as participating in a domain. This demonstrates how authentication is quite different from but closely involved with domains.

    @@ -1029,121 +1032,119 @@ Using these features you can make your clients verify their logon via the Samba server; make clients run a batch file when they logon to the network and download their preferences, desktop and start menu.

    -MS Windows XP Home edition is NOT able to join a domain and does not permit +MS Windows XP Home edition is not able to join a domain and does not permit the use of domain logons.

    Before launching into the configuration instructions, it is -worthwhile to look at how a Windows 9x/ME client performs a logon: +worthwhile to look at how a Windows 9x/Me client performs a logon:

    1. The client broadcasts (to the IP broadcast address of the subnet it is in) a NetLogon request. This is sent to the NetBIOS name DOMAIN<#1c> at the - NetBIOS layer. The client chooses the first response it receives, which + NetBIOS layer. The client chooses the first response it receives, which contains the NetBIOS name of the logon server to use in the format of \\SERVER.

    2. - The client then connects to that server, logs on (does an SMBsessetupX) and + The client connects to that server, logs on (does an SMBsessetupX) and then connects to the IPC$ share (using an SMBtconX).

    3. - The client then does a NetWkstaUserLogon request, which retrieves the name + The client does a NetWkstaUserLogon request, which retrieves the name of the user's logon script.

    4. - The client then connects to the NetLogon share and searches for said script - and if it is found and can be read, is retrieved and executed by the client. + The client then connects to the NetLogon share and searches for said script. + If it is found and can be read, it is retrieved and executed by the client. After this, the client disconnects from the NetLogon share.

    5. - The client then sends a NetUserGetInfo request to the server, to retrieve + The client sends a NetUserGetInfo request to the server to retrieve the user's home share, which is used to search for profiles. Since the response to the NetUserGetInfo request does not contain much more than - the user's home share, profiles for Win9X clients MUST reside in the user + the user's home share, profiles for Windows 9x clients must reside in the user home directory.

    6. - The client then connects to the user's home share and searches for the + The client connects to the user's home share and searches for the user's profile. As it turns out, you can specify the user's home share as a sharename and path. For example, \\server\fred\.winprofile. If the profiles are found, they are implemented.

    7. - The client then disconnects from the user's home share, and reconnects to + The client then disconnects from the user's home share and reconnects to the NetLogon share and looks for CONFIG.POL, the policies file. If this is found, it is read and implemented.

    -The main difference between a PDC and a Windows 9x logon server configuration is that +The main difference between a PDC and a Windows 9x/Me logon server configuration is:

    • - Password encryption is not required for a Windows 9x logon server. But note + Password encryption is not required for a Windows 9x/Me logon server. But note that beginning with MS Windows 98 the default setting is that plain-text password support is disabled. It can be re-enabled with the registry - changes that are documented in the chapter on Policies. + changes that are documented in .

    • - Windows 9x/ME clients do not require and do not use machine trust accounts. + Windows 9x/Me clients do not require and do not use Machine Trust Accounts.

    -A Samba PDC will act as a Windows 9x logon server; after all, it does provide the -network logon services that MS Windows 9x / Me expect to find. +A Samba PDC will act as a Windows 9x/Me logon server; after all, it does provide the +network logon services that MS Windows 9x/Me expect to find.

    Note

    Use of plain-text passwords is strongly discouraged. Where used they are easily detected using a sniffer tool to examine network traffic. -

    Security Mode and Master Browsers

    -There are a few comments to make in order to tie up some -loose ends. There has been much debate over the issue of whether -or not it is ok to configure Samba as a Domain Controller in security -modes other than USER. The only security mode -which will not work due to technical reasons is SHARE -mode security. DOMAIN and SERVER -mode security are really just a variation on SMB user level security. +

    Security Mode and Master Browsers

    +There are a few comments to make in order to tie up some loose ends. There has been +much debate over the issue of whether it is okay to configure Samba as a Domain +Controller in security modes other than user. The only security mode that will +not work due to technical reasons is share-mode security. Domain and server mode +security are really just a variation on SMB User Level Security.

    Actually, this issue is also closely tied to the debate on whether -or not Samba must be the domain master browser for its workgroup -when operating as a DC. While it may technically be possible +Samba must be the Domain Master Browser for its workgroup +when operating as a DC. While it may technically be possible to configure a server as such (after all, browsing and domain logons are two distinctly different functions), it is not a good idea to do -so. You should remember that the DC must register the DOMAIN<#1b> NetBIOS -name. This is the name used by Windows clients to locate the DC. +so. You should remember that the DC must register the DOMAIN<#1b> NetBIOS +name. This is the name used by Windows clients to locate the DC. Windows clients do not distinguish between the DC and the DMB. -A DMB is a Domain Master Browser - see Domain Master Browser. -For this reason, it is very wise to configure the Samba DC as the DMB. -

    -Now back to the issue of configuring a Samba DC to use a mode other -than security = user. If a Samba host is configured to use -another SMB server or DC in order to validate user connection -requests, then it is a fact that some other machine on the network -(the password server) knows more about the user than the Samba host. -99% of the time, this other host is a domain controller. Now -in order to operate in domain mode security, the workgroup parameter -must be set to the name of the Windows NT domain (which already -has a domain controller). If the domain does NOT already have a Domain Controller -then you do not yet have a Domain! +A DMB is a Domain Master Browser see . +For this reason, it is wise to configure the Samba DC as the DMB. +

    +Now back to the issue of configuring a Samba DC to use a mode other than +security = user. If a Samba host is +configured to use another SMB server or DC in order to validate user connection requests, +it is a fact that some other machine on the network (the password server) +knows more about the user than the Samba host. About 99% of the time, this other host is +a Domain Controller. Now to operate in domain mode security, the workgroup +parameter must be set to the name of the Windows NT domain (which already has a Domain Controller). +If the domain does not already have a Domain Controller, you do not yet have a Domain.

    Configuring a Samba box as a DC for a domain that already by definition has a PDC is asking for trouble. Therefore, you should always configure the Samba DC -to be the DMB for its domain and set security = user. +to be the DMB for its domain and set security = user. This is the only officially supported mode of operation. -

    Common Errors

    '$' cannot be included in machine name

    -A 'machine account', (typically) stored in /etc/passwd, -takes the form of the machine name with a '$' appended. FreeBSD (and other BSD -systems?) won't create a user with a '$' in their name. +

    Common Errors

    $” Cannot Be Included in Machine Name

    +A machine account, typically stored in /etc/passwd, takes the form of the machine +name with a “$” appended. FreeBSD (and other BSD systems) will not create a user with a +“$” in the name.

    The problem is only in the program used to make the entry. Once made, it works perfectly. -Create a user without the '$'. Then use vipw to edit the entry, adding -the '$'. Or create the whole entry with vipw if you like; make sure you use a unique User ID! -

    Note

    -The UNIX tool vipw is a common tool for directly editting the /etc/passwd file. -

    Joining domain fails because of existing machine account

    I get told "You already have a connection to the Domain...." -or "Cannot join domain, the credentials supplied conflict with an -existing set.." when creating a machine trust account.

    -This happens if you try to create a machine trust account from the -machine itself and already have a connection (e.g. mapped drive) -to a share (or IPC$) on the Samba PDC. The following command +Create a user without the “$”. Then use vipw to edit the entry, adding +the “$”. Or create the whole entry with vipw if you like; make sure you use a unique user login ID. +

    Note

    The machine account must have the exact name that the workstation has.

    Note

    +The UNIX tool vipw is a common tool for directly editing the /etc/passwd file. +

    Joining Domain Fails Because of Existing Machine Account

    +“I get told, `You already have a connection to the Domain....' or `Cannot join domain, the +credentials supplied conflict with an existing set...' when creating a Machine Trust Account.” +

    +This happens if you try to create a Machine Trust Account from the machine itself and already have a +connection (e.g., mapped drive) to a share (or IPC$) on the Samba PDC. The following command will remove all network drive connections:

     C:\> net use * /d
     

    -Further, if the machine is already a 'member of a workgroup' that +

    +Further, if the machine is already a “member of a workgroup” that is the same name as the domain you are joining (bad idea) you will -get this message. Change the workgroup name to something else, it +get this message. Change the workgroup name to something else, it does not matter what, reboot, and try again. -

    The system can not log you on (C000019B)....

    I joined the domain successfully but after upgrading -to a newer version of the Samba code I get the message, The system -can not log you on (C000019B), Please try again or consult your -system administrator when attempting to logon.” +

    The System Cannot Log You On (C000019B)

    I joined the domain successfully but after upgrading +to a newer version of the Samba code I get the message, `The system +cannot log you on (C000019B), Please try again or consult your +system administrator when attempting to logon.'

    + This occurs when the domain SID stored in the secrets.tdb database is changed. The most common cause of a change in domain SID is when the domain name and/or the server name (NetBIOS name) is changed. @@ -1151,141 +1152,142 @@ The only way to correct the problem is to restore the original domain SID or remove the domain client from the domain and rejoin. The domain SID may be reset using either the net or rpcclient utilities.

    -The reset or change the domain SID you can use the net command as follows: +To reset or change the domain SID you can use the net command as follows:

     root# net getlocalsid 'OLDNAME'
     root# net setlocalsid 'SID'
     

    -Workstation machine trust accounts work only with the Domain (or network) SID. If this SID changes -then domain members (workstations) will not be able to log onto the domain. The original Domain SID +Workstation Machine Trust Accounts work only with the Domain (or network) SID. If this SID changes +Domain Members (workstations) will not be able to log onto the domain. The original Domain SID can be recovered from the secrets.tdb file. The alternative is to visit each workstation to re-join it to the domain. -

    The machine trust account not accessible

    - “When I try to join the domain I get the message The machine account -for this computer either does not exist or is not accessible. What's +

    The Machine Trust Account Is Not Accessible

    +“When I try to join the domain I get the message, `The machine account +for this computer either does not exist or is not accessible'. What's wrong?

    -This problem is caused by the PDC not having a suitable machine trust account. -If you are using the add machine script method to create +This problem is caused by the PDC not having a suitable Machine Trust Account. +If you are using the add machine script method to create accounts then this would indicate that it has not worked. Ensure the domain admin user system is working.

    -Alternatively if you are creating account entries manually then they +Alternately, if you are creating account entries manually then they have not been created correctly. Make sure that you have the entry -correct for the machine trust account in smbpasswd file on the Samba PDC. +correct for the Machine Trust Account in smbpasswd file on the Samba PDC. If you added the account using an editor rather than using the smbpasswd utility, make sure that the account name is the machine NetBIOS name -with a '$' appended to it ( i.e. computer_name$ ). There must be an entry +with a “$” appended to it (i.e., computer_name$). There must be an entry in both /etc/passwd and the smbpasswd file.

    -Some people have also reported -that inconsistent subnet masks between the Samba server and the NT -client can cause this problem. Make sure that these are consistent -for both client and server. -

    Account disabled

    When I attempt to login to a Samba Domain from a NT4/W2K workstation, - I get a message about my account being disabled.

    +Some people have also reported that inconsistent subnet masks between the Samba server and the NT +client can cause this problem. Make sure that these are consistent for both client and server. +

    Account Disabled

    When I attempt to login to a Samba Domain from a NT4/W200x workstation, +I get a message about my account being disabled.

    Enable the user accounts with smbpasswd -e username -, this is normally done as an account is created. -

    Domain Controller Unavailable

    Until a few minutes after Samba has started, clients get the error "Domain Controller Unavailable"

    - A domain controller has to announce on the network who it is. This usually takes a while. -

    Can not log onto domain member workstation after joining domain

    After successfully joining the domain user logons fail with one of two messages:

    One to the effect that the domain controller can not be found, the other claiming that the - account does not exist in the domain or that the password is incorrect.

    This may be due to incompatible settings between - the Windows client and the Samba-3 server for schannel (secure channel) settings - or smb signing settings. Check your samba settings for - client schannel, server schannel, client signing, server signing by executing: - testparm -v | more and looking for the value of these parameters. -

    - Also use the Microsoft Management Console - Local Security Settings. This tool is available from the - Control Panel. The Policy settings are found in the Local Policies / Securty Options area and are prefixed by - Secure Channel: ..., and Digitally sign .... -

    - It is important that these be set consistently with the Samba-3 server settings. -

    Chapter 6. Backup Domain Control

    John H. Terpstra

    Samba Team

    Volker Lendecke

    -Before you continue reading in this section, please make sure that you are comfortable -with configuring a Samba Domain Controller as described in chapter on setting up Samba as a PDC. -

    Features And Benefits

    -This is one of the most difficult chapters to summarise. It does not matter what we say here -for someone will still draw conclusions and / or approach the Samba-Team with expectations +. This is normally done as an account is created. +

    Domain Controller Unavailable

    Until a few minutes after Samba has started, clients get the error `Domain Controller Unavailable'

    +A Domain Controller has to announce its role on the network. This usually takes a while. Be patient for up to fifteen minutes, +then try again. +

    Cannot Log onto Domain Member Workstation After Joining Domain

    + + +After successfully joining the domain, user logons fail with one of two messages: one to the +effect that the Domain Controller cannot be found; the other claims that the account does not +exist in the domain or that the password is incorrect. This may be due to incompatible +settings between the Windows client and the Samba-3 server for schannel +(secure channel) settings or smb signing settings. Check your Samba +settings for client schannel, server schannel, client signing, server signing +by executing: +

    +testparm -v | more and looking for the value of these parameters.
    +

    +

    +Also use the Microsoft Management Console Local Security Settings. This tool is available from the +Control Panel. The Policy settings are found in the Local Policies/Securty Options area and are prefixed by +Secure Channel: ..., and Digitally sign ..... +

    +It is important that these be set consistently with the Samba-3 server settings. +



    [2] See , and + .

    Chapter 6. Backup Domain Control

    John H. Terpstra

    Samba Team

    Volker Lendecke

    Guenther Deschner

    LDAP updates

    +Before you continue reading this section, please make sure that you are comfortable +with configuring a Samba Domain Controller as described in . +

    Features and Benefits

    +This is one of the most difficult chapters to summarize. It does not matter what we say here +for someone will still draw conclusions and/or approach the Samba Team with expectations that are either not yet capable of being delivered, or that can be achieved far more effectively using a totally different approach. In the event that you should have a persistent -concern that is not addressed in this book then please email -John H Terpstra clearly setting out your requirements -and / or question and we will do our best to provide a solution. +concern that is not addressed in this book, please email John H. Terpstra +clearly setting out your requirements and/or question and we will do our best to provide a solution.

    -Samba-3 is capable of acting as a Backup Domain Controller to another Samba Primary Domain -Controller. A Samba-3 PDC can operate with an LDAP Account backend. The LDAP backend can be + +Samba-3 is capable of acting as a Backup Domain Controller (BDC) to another Samba Primary Domain +Controller (PDC). A Samba-3 PDC can operate with an LDAP Account backend. The LDAP backend can be either a common master LDAP server, or a slave server. The use of a slave LDAP server has the -benefit that when the master is down clients may still be able to log onto the network. -This effectively gives samba a high degree of scalability iand is a very sweet (nice) solution -for large organisations. +benefit that when the master is down, clients may still be able to log onto the network. +This effectively gives Samba a high degree of scalability and is an effective solution +for large organizations. Do not use an LDAP slave server for a PDC, this may cause serious +stability and operational problems.

    + While it is possible to run a Samba-3 BDC with non-LDAP backend, the administrator will -need to figure out precisely what is the best way to replicate (copy / distribute) the -user and machine Accounts backend. +need to figure out precisely what is the best way to replicate (copy/distribute) the +user and machine accounts' backend.

    -The use of a non-LDAP backend SAM database is particularly problematic because Domain member -servers and workstations periodically change the machine trust account password. The new + +The use of a non-LDAP backend SAM database is particularly problematic because Domain Member +servers and workstations periodically change the Machine Trust Account password. The new password is then stored only locally. This means that in the absence of a centrally stored -accounts database (such as that provided with an LDAP based solution) if Samba-3 is running -as a BDC, the BDC instance of the Domain member trust account password will not reach the -PDC (master) copy of the SAM. If the PDC SAM is then replicated to BDCs this results in -overwriting of the SAM that contains the updated (changed) trust account password with resulting +accounts database (such as that provided with an LDAP-based solution) if Samba-3 is running +as a BDC, the BDC instance of the Domain Member trust account password will not reach the +PDC (master) copy of the SAM. If the PDC SAM is then replicated to BDCs, this results in +overwriting the SAM that contains the updated (changed) trust account password with resulting breakage of the domain trust.

    -Considering the number of comments and questions raised concerning how to configure a BDC -lets consider each possible option and look at the pro's and con's for each theoretical solution: -

    Backup Domain Backend Account Distribution Options

    • - Solution: Passwd Backend is LDAP based, BDCs use a slave LDAP server -

      - Arguments For: This is a neat and manageable solution. The LDAP based SAM (ldapsam) - is constantly kept up to date. -

      - Arguments Against: Complexity -

    • - Passdb Backend is tdbsam based, BDCs use cron based net rpc vampire to - obtain the Accounts database from the PDC and place them into the Samba SAM. - net rpc vampire is a Samba function of the "net" command. -

      - Arguments For: It would be a nice solution -

      - Arguments Against: It does not work because Samba-3 does not support the required - protocols. This may become a later feature but is not available today. -

    • - Make use of rsync to replicate (pull down) copies of the essential account files -

      - Arguments For: It is a simple solution, easy to set up as a scheduled job -

      - Arguments Against: This will over-write the locally changed machine trust account - passwords. This is a broken and flawed solution. Do NOT do this. -

    • - Operate with an entirely local accounts database (not recommended) -

      - Arguments For: Simple, easy to maintain -

      - Arguments Against: All machine trust accounts and user accounts will be locally - maintained. Domain users will NOT be able to roam from office to office. This is - a broken and flawed solution. Do NOT do this. -

    Essential Background Information

    +Considering the number of comments and questions raised concerning how to configure a BDC, +let's consider each possible option and look at the pros and cons for each possible solution. + lists possible design configurations for a PDC/BDC infrastructure. + + + + +

    Table 6.1. Domain Backend Account Distribution Options

    PDC BackendBDC BackendNotes/Discussion

    Master LDAP Server

    Slave LDAP Server

    The optimal solution that provides high integrity. The SAM will be + replicated to a common master LDAP server.

    Single Central LDAP Server

    Single Central LDAP Server

    + A workable solution without fail-over ability. This is a useable solution, but not optimal. +

    tdbsam

    tdbsam + net rpc vampire

    + Does not work with Samba-3.0.0; may be implemented in a later release. The downside of this solution + is that an external process will control account database integrity. This solution may appeal to sites + that wish to avoid the complexity of LDAP. The net rpc vampire is used to + synchronize domain accounts from the PDC to the BDC. +

    tdbsam

    tdbsam + rsync

    + Do not use this configuration. + Does not work because the TDB files are live and data may not have been flushed to disk. + Use rsync to synchronize the TDB database files from the PDC to the BDC. +

    smbpasswd file

    smbpasswd file

    + Do not use this configuration. + Not an elegant solution due to the delays in synchronization. + Use rsync to synchronize the TDB database files from the PDC to the BDC. + Can be made to work using a cron job to synchronize data from the PDC to the BDC. +

    Essential Background Information

    A Domain Controller is a machine that is able to answer logon requests from network workstations. Microsoft LanManager and IBM LanServer were two early products that provided this capability. The technology has become known as the LanMan Netlogon service.

    -When MS Windows NT3.10 was first released, it supported an new style of Domain Control +When MS Windows NT3.10 was first released, it supported a new style of Domain Control and with it a new form of the network logon service that has extended functionality. This service became known as the NT NetLogon Service. The nature of this service has -changed with the evolution of MS Windows NT and today provides a very complex array of -services that are implemented over a complex spectrum of technologies. -

    MS Windows NT4 Style Domain Control

    -Whenever a user logs into a Windows NT4 / 200x / XP Professional Workstation, -the workstation connects to a Domain Controller (authentication server) to validate -the username and password that the user entered are valid. If the information entered -does not validate against the account information that has been stored in the Domain -Control database (the SAM, or Security Account Manager database) then a set of error +changed with the evolution of MS Windows NT and today provides a complex array of +services that are implemented over an intricate spectrum of technologies. +

    MS Windows NT4-style Domain Control

    +Whenever a user logs into a Windows NT4/200x/XP Professional Workstation, +the workstation connects to a Domain Controller (authentication server) to validate that +the username and password the user entered are valid. If the information entered +does not match account information that has been stored in the Domain +Control database (the SAM, or Security Account Manager database), a set of error codes is returned to the workstation that has made the authentication request.

    -When the username / password pair has been validated, the Domain Controller +When the username/password pair has been validated, the Domain Controller (authentication server) will respond with full enumeration of the account information that has been stored regarding that user in the User and Machine Accounts database for that Domain. This information contains a complete network access profile for @@ -1296,9 +1298,10 @@ network access time limits, account validity information, machine names from whi user may access the network, and much more. All this information was stored in the SAM in all versions of MS Windows NT (3.10, 3.50, 3.51, 4.0).

    + The account information (user and machine) on Domain Controllers is stored in two files, one containing the Security information and the other the SAM. These are stored in files -by the same name in the C:\WinNT\System32\config directory. These +by the same name in the C:\Windows NT\System32\config directory. These are the files that are involved in replication of the SAM database where Backup Domain Controllers are present on the network.

    @@ -1310,139 +1313,240 @@ There are two situations in which it is desirable to install Backup Domain Contr

  • At each remote site, to reduce wide area network traffic and to add stability to remote network operations. The design of the network, the strategic placement of - Backup Domain Controllers, together with an implementation that localises as much - of network to client interchange as possible will help to minimise wide area network + Backup Domain Controllers, together with an implementation that localizes as much + of network to client interchange as possible will help to minimize wide area network bandwidth needs (and thus costs).

  • -The PDC contains the master copy of the SAM. In the event that an administrator makes a -change to the user account database while physically present on the local network that -has the PDC, the change will likely be made directly to the PDC instance of the master -copy of the SAM. In the event that this update may be performed in a branch office the -change will likely be stored in a delta file on the local BDC. The BDC will then send -a trigger to the PDC to commence the process of SAM synchronisation. The PDC will then -request the delta from the BDC and apply it to the master SAM. The PDC will then contact -all the BDCs in the Domain and trigger them to obtain the update and then apply that to -their own copy of the SAM. -

    -Thus the BDC is said to hold a read-only of the SAM from which -it is able to process network logon requests and to authenticate users. The BDC can +The inter-operation of a PDC and its BDCs in a true Windows NT4 environemt is worth +mentioning here. The PDC contains the master copy of the SAM. In the event that an +administrator makes a change to the user account database while physically present +on the local network that has the PDC, the change will likely be made directly to +the PDC instance of the master copy of the SAM. In the event that this update may +be performed in a branch office, the change will likely be stored in a delta file +on the local BDC. The BDC will then send a trigger to the PDC to commence the process +of SAM synchronization. The PDC will then request the delta from the BDC and apply +it to the master SAM. The PDC will then contact all the BDCs in the Domain and +trigger them to obtain the update and then apply that to their own copy of the SAM. +

    +Samba-3 can not participate in true SAM replication and is therefore not able to +employ precisely the same protocols used by MS Windows NT4. A Samba-3 BDC will +not create SAM update delta files. It will not inter-operate with a PDC (NT4 or Samba) +to synchronize the SAM from delta files that are held by BDCs. +

    +Samba-3 cannot function as a BDC to an MS Windows NT4 PDC, and Samba-3 can not +function correctly as a PDC to an MS Windows NT4 BDC. Both Samba-3 and MS Windows +NT4 can function as a BDC to its own type of PDC. +

    +The BDC is said to hold a read-only of the SAM from which +it is able to process network logon requests and authenticate users. The BDC can continue to provide this service, particularly while, for example, the wide area -network link to the PDC is down. Thus a BDC plays a very important role in both -maintenance of Domain security as well as in network integrity. -

    -In the event that the PDC should need to be taken out of service, or if it dies, then -one of the BDCs can be promoted to a PDC. If this happens while the original PDC is on -line then it is automatically demoted to a BDC. This is an important aspect of Domain -Controller management. The tool that is used to affect a promotion or a demotion is the -Server Manager for Domains. -

    Example PDC Configuration

    -Since version 2.2 Samba officially supports domain logons for all current Windows Clients, -including Windows NT4, 2003 and XP Professional. For samba to be enabled as a PDC some -parameters in the [global]-section of the smb.conf have to be set: -

    Example 6.1. Minimal smb.conf for being a PDC

    workgroup = MIDEARTH
    domain master = yes
    domain logons = yes

    +network link to the PDC is down. A BDC plays a very important role in both the +maintenance of Domain Security as well as in network integrity. +

    +In the event that the NT4 PDC should need to be taken out of service, or if it dies, +one of the NT4 BDCs can be promoted to a PDC. If this happens while the original NT4 PDC is on +line, it is automatically demoted to an NT4 BDC. This is an important aspect of Domain +Controller management. The tool that is used to effect a promotion or a demotion is the +Server Manager for Domains. It should be noted that Samba-3 BDCs can not be promoted +in this manner because reconfiguration of Samba requires changes to the smb.conf file. +

    Example PDC Configuration

    +Beginning with Version 2.2, Samba officially supports domain logons for all current Windows clients, +including Windows NT4, 2003 and XP Professional. For Samba to be enabled as a PDC, some +parameters in the [global]-section of the smb.conf have to be set. +Refer to for an example of the minimum required settings. +

    Example 6.1. Minimal smb.conf for a PDC in Use With a BDC LDAP Server on PDC.

    workgroup = MIDEARTH
    passdb backend = ldapsam://localhost:389
    domain master = yes
    domain logons = yes

    Several other things like a [homes] and a [netlogon] share also need to be set along with -settings for the profile path, the users home drive, etc.. This will not be covered in this -chapter, for more information please refer to the chapter about samba as a PDC. -

    Active Directory Domain Control

    +settings for the profile path, the user's home drive, and so on. This is not covered in this +chapter; for more information please refer to . +

    LDAP Configuration Notes

    +When configuring a master and a slave LDAP server, it is advisable to use the master LDAP server +for the PDC and slave LDAP servers for the BDCs. It is not essential to use slave LDAP servers, however, +many administrators will want to do so in order to provide redundant services. Of course, one or more BDCs +may use any slave LDAP server. Then again, it is entirely possible to use a single LDAP server for the +entire network. +

    +When configuring a master LDAP server that will have slave LDAP servers, do not forget to configure +this in the /etc/openldap/slapd.conf file. It must be noted that the DN of a +server certificate must use the CN attribute to name the server, and the CN must carry the servers' +fully qualified domain name. Additional alias names and wildcards may be present in the +subjectAltName certificate extension. More details on server certificate names are in RFC2830. +

    +It does not really fit within the scope of this document, but a working LDAP installation is +basic to LDAP enabled Samba operation. When using an OpenLdap server with Transport Layer Security +(TLS), the machine name in /etc/ssl/certs/slapd.pem must be the +same as in /etc/openldap/sldap.conf. The Red Hat Linux startup script +creates the slapd.pem file with hostname “localhost.localdomain.” +It is impossible to access this LDAP server from a slave LDAP server (i.e., a Samba BDC) unless the +certificate is recreated with a correct hostname. +

    +Do not install a Samba PDC on a OpenLDAP slave server. Joining client machines to the domain +will fail in this configuration because the change to the machine account in the LDAP tree +must take place on the master LDAP server. This is not replicated rapidly enough to the slave +server that the PDC queries. It therfore gives an error message on the client machine about +not being able to set up account credentials. The machine account is created on the LDAP server +but the password fields will be empty. +

    +Possible PDC/BDC plus LDAP configurations include: +

    • + PDC+BDC -> One Central LDAP Server. +

    • + PDC -> LDAP master server, BDC -> LDAP slave server. +

    • + PDC -> LDAP master, with secondary slave LDAP server. +

      + BDC -> LDAP master, with secondary slave LDAP server. +

    • + PDC -> LDAP master, with secondary slave LDAP server. +

      + BDC -> LDAP slave server, with secondary master LDAP server. +

    +In order to have a fall-back configuration (secondary) LDAP server one would specify +the secondary LDAP server in the smb.conf file as shown in . +

    +

    Example 6.2. Multiple LDAP Servers in smb.conf

    ...
    passdb backend = ldapsam:ldap://master.quenya.org
    ldapsam:ldap://slave.quenya.org
    ...

    +

    Active Directory Domain Control

    As of the release of MS Windows 2000 and Active Directory, this information is now stored in a directory that can be replicated and for which partial or full administrative control -can be delegated. Samba-3 is NOT able to be a Domain Controller within an Active Directory -tree, and it can not be an Active Directory server. This means that Samba-3 also can NOT +can be delegated. Samba-3 is not able to be a Domain Controller within an Active Directory +tree, and it cannot be an Active Directory server. This means that Samba-3 also cannot act as a Backup Domain Controller to an Active Directory Domain Controller. -

    What qualifies a Domain Controller on the network?

    -Every machine that is a Domain Controller for the domain SAMBA has to register the NetBIOS -group name SAMBA<#1c> with the WINS server and/or by broadcast on the local network. -The PDC also registers the unique NetBIOS name SAMBA<#1b> with the WINS server. +

    What Qualifies a Domain Controller on the Network?

    +Every machine that is a Domain Controller for the domain MIDEARTH has to register the NetBIOS +group name MIDEARTH<#1c> with the WINS server and/or by broadcast on the local network. +The PDC also registers the unique NetBIOS name MIDEARTH<#1b> with the WINS server. The name type <#1b> name is normally reserved for the Domain Master Browser, a role that has nothing to do with anything related to authentication, but the Microsoft Domain -implementation requires the domain master browser to be on the same machine as the PDC. -

    How does a Workstation find its domain controller?

    -An MS Windows NT4 / 200x / XP Professional workstation in the domain SAMBA that wants a -local user to be authenticated has to find the domain controller for SAMBA. It does this -by doing a NetBIOS name query for the group name SAMBA<#1c>. It assumes that each -of the machines it gets back from the queries is a domain controller and can answer logon -requests. To not open security holes both the workstation and the selected domain controller +implementation requires the Domain Master Browser to be on the same machine as the PDC. +

    +Where a WINS server is not used, broadcast name registrations alone must suffice. Refer to + for more information regarding TCP/IP network protocols and how + SMB/CIFS names are handled. +

    How does a Workstation find its Domain Controller?

    +There are two different mechanisms to locate a domain controller, one method is used when +NetBIOS over TCP/IP is enabled and the other when it has been disabled in the TCP/IP +network configuration. +

    +Where NetBIOS over TCP/IP is disabled, all name resolution involves the use of DNS, broadcast +messaging over UDP, as well as Active Directory communication technologies. In this type of +environment all machines require appropriate DNS entries. More information may be found in +. +

    NetBIOS Over TCP/IP Enabled

    +An MS Windows NT4/200x/XP Professional workstation in the domain MIDEARTH that wants a +local user to be authenticated has to find the Domain Controller for MIDEARTH. It does this +by doing a NetBIOS name query for the group name MIDEARTH<#1c>. It assumes that each +of the machines it gets back from the queries is a Domain Controller and can answer logon +requests. To not open security holes, both the workstation and the selected Domain Controller authenticate each other. After that the workstation sends the user's credentials (name and -password) to the local Domain Controller, for validation. -

    Backup Domain Controller Configuration

    -Several things have to be done: +password) to the local Domain Controller for validation. +

    NetBIOS Over TCP/IP Disabled

    +An MS Windows NT4/200x/XP Professional workstation in the realm quenya.org +that has a need to affect user logon authentication will locate the Domain Controller by +requerying DNS servers for the _ldap._tcp.pdc.ms-dcs.quenya.org record. +More information regarding this subject may be found in . +

    Backup Domain Controller Configuration

    +The creation of a BDC requires some steps to prepare the Samba server before +smbd is executed for the first time. These steps are outlines as follows: +

    • - The domain SID has to be the same on the PDC and the BDC. This used to - be stored in the file private/MACHINE.SID. This file is not created - since Samba 2.2.5. Nowadays the domain SID is stored in the file - private/secrets.tdb. Simply copying the secrets.tdb - from the PDC to the BDC does not work, as the BDC would - generate a new SID for itself and override the domain SID with this - new BDC SID.

      + The domain SID has to be the same on the PDC and the BDC. In Samba versions + pre-2.2.5, the domain SID was stored in the file private/MACHINE.SID. + The domain SID is now stored in the file private/secrets.tdb. This file + is unique to each server and can not be copied from a PDC to a BDC, the BDC will generate + a new SID at start-up. It will over-write the PDC domain SID with the newly created BDC SID. + There is a procedure that will allow the BDC to aquire the Domain SID. This is described here. +

      To retrieve the domain SID from the PDC or an existing BDC and store it in the - secrets.tdb, execute: + secrets.tdb, execute:

       root# net rpc getsid
       
    • + Specification of the ldap admin dn is obligatory. + This also requires the LDAP administration password to be set in the secrets.tdb + using the smbpasswd -w mysecret. +

    • + Either ldap suffix or + ldap idmap suffix must be specified in + the smb.conf file. +

    • + The UNIX user database has to be synchronized from the PDC to the - BDC. This means that both the /etc/passwd and /etc/group have to be - replicated from the PDC to the BDC. This can be done manually - whenever changes are made, or the PDC is set up as a NIS master - server and the BDC as a NIS slave server. To set up the BDC as a - mere NIS client would not be enough, as the BDC would not be able to - access its user database in case of a PDC failure. NIS is by no means - the only method to synchronize passwords. An LDAP solution would work - as well. -

    • - The Samba password database has to be replicated from the PDC to the BDC. - As said above, though possible to synchronise the smbpasswd - file with rsync and ssh, this method is broken and flawed, and is - therefore not recommended. A better solution is to set up slave LDAP - servers for each BDC and a master LDAP server for the PDC. -

    • - Any netlogon share has to be replicated from the PDC to the + BDC. This means that both the /etc/passwd and + /etc/group have to be replicated from the PDC + to the BDC. This can be done manually whenever changes are made. + Alternately, the PDC is set up as an NIS master server and the BDC as an NIS slave + server. To set up the BDC as a mere NIS client would not be enough, + as the BDC would not be able to access its user database in case of + a PDC failure. NIS is by no means the only method to synchronize + passwords. An LDAP solution would also work. +

    • + The Samba password database must be replicated from the PDC to the BDC. + Although it is possible to synchronize the smbpasswd + file with rsync and ssh, this method + is broken and flawed, and is therefore not recommended. A better solution + is to set up slave LDAP servers for each BDC and a master LDAP server for the PDC. +

    • + The netlogon share has to be replicated from the PDC to the BDC. This can be done manually whenever login scripts are changed, - or it can be done automatically together with the smbpasswd - synchronization. -

    Example Configuration

    -Finally, the BDC has to be found by the workstations. This can be done by setting: -

    Example 6.2. Minimal setup for being a BDC

    workgroup = MIDEARTH
    domain master = no
    domain logons = yes
    idmap backend = ldapsam://slave-ldap.quenya.org

    + or it can be done automatically using a cron job + that will replicate the directory structure in this share using a tool + like rsync. +

    Example Configuration

    +Finally, the BDC has to be found by the workstations. This can be done by setting Samba as shown in . +

    Example 6.3. Minimal setup for being a BDC

    workgroup = MIDEARTH
    passdb backend = ldapsam:ldap://slave-ldap.quenya.org
    domain master = no
    domain logons = yes
    idmap backend = ldapsam:ldap://slave-ldap.quenya.org

    In the [global]-section of the smb.conf of the BDC. This makes the BDC only register the name SAMBA<#1c> with the WINS server. This is no problem as the name SAMBA<#1c> is a NetBIOS group name that is meant to be registered by more than one machine. The parameter -domain master = no +domain master = no forces the BDC not to register SAMBA<#1b> which as a unique NetBIOS name is reserved for the Primary Domain Controller.

    + + The idmap backend will redirect the winbindd utility to use the LDAP database to resolve all UIDs and GIDs for UNIX accounts.

    Note

    + Samba-3 has introduced a new ID mapping facility. One of the features of this facility is that it -allows greater flexibility in how user and group IDs are handled in respect of NT Domain User and Group -SIDs. One of the new facilities provides for explicitly ensuring that UNIX / Linux UID and GID values +allows greater flexibility in how user and group IDs are handled in respect to NT Domain User and Group +SIDs. One of the new facilities provides for explicitly ensuring that UNIX/Linux UID and GID values will be consistent on the PDC, all BDCs and all Domain Member servers. The parameter that controls this is called idmap backend. Please refer to the man page for smb.conf for more information -regarding it's behaviour. Do NOT set this parameter except where an LDAP backend (ldapsam) is in use. -

    Common Errors

    -As this is a rather new area for Samba there are not many examples that we may refer to. Keep -watching for updates to this section. -

    Machine Accounts keep expiring, what can I do?

    -This problem will occur when occur when the passdb (SAM) files are copied from a central -server but the local Backup Domain Controllers. Local machine trust account password updates +regarding its behavior. +

    +The use of the idmap backend = ldap://master.quenya/org +option on a BDC only make sense where ldapsam is used on a PDC. The purpose for an LDAP based idmap backend is +also to allow a domain-member (without its own passdb backend) to use winbindd to resolve Windows network users +and groups to common UID/GIDs. In other words, this option is generally intended for use on BDCs and on Domain +Member servers. +

    Common Errors

    +As this is a rather new area for Samba, there are not many examples that we may refer to. +Updates will be published as they become available and may be found in later Samba releases or +from the Samba web site. +

    Machine Accounts Keep Expiring

    + +This problem will occur when the passdb (SAM) files are copied from a central +server but the local Backup Domain Controller is acting as a PDC. This results in the application of +Local Machine Trust Account password updates to the local SAM. Such updates are not copied back to the central server. The newer machine account password is then over -written when the SAM is copied from the PDC. The result is that the Domain member machine -on start up will find that it's passwords does not match the one now in the database and +written when the SAM is re-copied from the PDC. The result is that the Domain Member machine +on start up will find that its passwords do not match the one now in the database and since the startup security check will now fail, this machine will not allow logon attempts to proceed and the account expiry error will be reported.

    -The solution: use a more robust passdb backend, such as the ldapsam backend, setting up -an slave LDAP server for each BDC, and a master LDAP server for the PDC. -

    Can Samba be a Backup Domain Controller to an NT4 PDC?

    -With version 2.2, no. The native NT4 SAM replication protocols have not yet been fully -implemented. The Samba Team is working on understanding and implementing the protocols, -but this work has not been finished for Samba-3. -

    -Can I get the benefits of a BDC with Samba? Yes, but only to a Samba PDC. The main reason for implementing a -BDC is availability. If the PDC is a Samba machine, a second Samba machine can be set up to -service logon requests whenever the PDC is down. -

    How do I replicate the smbpasswd file?

    +The solution is to use a more robust passdb backend, such as the ldapsam backend, setting up +a slave LDAP server for each BDC, and a master LDAP server for the PDC. +

    Can Samba Be a Backup Domain Controller to an NT4 PDC?

    + +No. The native NT4 SAM replication protocols have not yet been fully implemented. +

    +Can I get the benefits of a BDC with Samba? Yes, but only to a Samba PDC.The +main reason for implementing a BDC is availability. If the PDC is a Samba +machine, a second Samba machine can be set up to service logon requests whenever +the PDC is down. +

    How Do I Replicate the smbpasswd File?

    + Replication of the smbpasswd file is sensitive. It has to be done whenever changes to the SAM are made. Every user's password change is done in the smbpasswd file and has to be replicated to the BDC. So replicating the smbpasswd file very often is necessary. @@ -1450,154 +1554,156 @@ has to be replicated to the BDC. So replicating the smbpasswd file very often is As the smbpasswd file contains plain text password equivalents, it must not be sent unencrypted over the wire. The best way to set up smbpasswd replication from the PDC to the BDC is to use the utility rsync. rsync can use ssh as a transport. -Ssh itself can be set up to accept only rsync transfer without requiring the user -to type a password. +ssh itself can be set up to accept only +rsync transfer without requiring the user to type a password.

    As said a few times before, use of this method is broken and flawed. Machine trust -accounts will go out of sync, resulting in a very broken domain. This method is +accounts will go out of sync, resulting in a broken domain. This method is not recommended. Try using LDAP instead. -

    Can I do this all with LDAP?

    -The simple answer is YES. Samba's pdb_ldap code supports binding to a replica +

    Can I Do This All with LDAP?

    +The simple answer is yes. Samba's pdb_ldap code supports binding to a replica LDAP server, and will also follow referrals and rebind to the master if it ever needs to make a modification to the database. (Normally BDCs are read only, so this will not occur often). -

    Chapter 7. Domain Membership

    John H. Terpstra

    Samba Team

    Jeremy Allison

    Samba Team

    Gerald (Jerry) Carter

    Samba Team

    Andrew Tridgell

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    Guenther Deschner

    LDAP updates

    +Domain Membership is a subject of vital concern. Samba must be able to +participate as a member server in a Microsoft Domain Security context, and Samba must be capable of providing Domain machine member trust accounts, -otherwise it would not be capable of offering a viable option for many users. +otherwise it would not be able to offer a viable option for many users.

    -This chapter covers background information pertaining to domain membership, -Samba configuration for it, and MS Windows client procedures for joining a -domain. Why is this necessary? Because both are areas in which there exists +This chapter covers background information pertaining to Domain Membership, +the Samba configuration for it, and MS Windows client procedures for joining a +domain. Why is this necessary? Because both are areas in which there exists within the current MS Windows networking world and particularly in the UNIX/Linux networking and administration world, a considerable level of -mis-information, incorrect understanding, and a lack of knowledge. Hopefully +misinformation, incorrect understanding and a lack of knowledge. Hopefully this chapter will fill the voids. -

    Features and Benefits

    -MS Windows workstations and servers that want to participate in domain security need to -be made Domain members. Participating in Domain security is often called +

    Features and Benefits

    +MS Windows workstations and servers that want to participate in Domain Security need to +be made Domain Members. Participating in Domain Security is often called Single Sign On or SSO for short. This chapter describes the process that must be followed to make a workstation -(or another server - be it an MS Windows NT4 / 200x -server) or a Samba server a member of an MS Windows Domain security context. +(or another server be it an MS Windows NT4 / 200x +server) or a Samba server a member of an MS Windows Domain Security context.

    -Samba-3 can join an MS Windows NT4 style domain as a native member server, an + +Samba-3 can join an MS Windows NT4-style domain as a native member server, an MS Windows Active Directory Domain as a native member server, or a Samba Domain -Control network. -

    -Domain membership has many advantages: +Control network. Domain Membership has many advantages:

    • - MS Windows workstation users get the benefit of SSO + + MS Windows workstation users get the benefit of SSO.

    • - Domain user access rights and file ownership / access controls can be set - from the single Domain SAM (Security Account Manager) database - (works with Domain member servers as well as with MS Windows workstations - that are domain members) + Domain user access rights and file ownership/access controls can be set + from the single Domain Security Account Manager (SAM) database + (works with Domain Member servers as well as with MS Windows workstations + that are Domain Members).

    • - Only MS Windows NT4 / 200x / XP Professional - workstations that are Domain members - can use network logon facilities + Only MS Windows NT4/200x/XP Professional + workstations that are Domain Members can use network logon facilities.

    • Domain Member workstations can be better controlled through the use of Policy files (NTConfig.POL) and Desktop Profiles.

    • Through the use of logon scripts, users can be given transparent access to network - applications that run off application servers + applications that run off application servers.

    • Network administrators gain better application and user access management abilities because there is no need to maintain user accounts on any network client or server, other than the central Domain database - (either NT4/Samba SAM style Domain, NT4 Domain that is back ended with an - LDAP directory, or via an Active Directory infrastructure) -

    MS Windows Workstation/Server Machine Trust Accounts

    -A machine trust account is an account that is used to authenticate a client -machine -(rather than a user) to the Domain Controller server. In Windows terminology, -this is known as a "Computer Account." -

    -The password of a machine trust account acts as the shared secret for -secure communication with the Domain Controller. This is a security + (either NT4/Samba SAM style Domain, NT4 Domain that is backended with an + LDAP directory, or via an Active Directory infrastructure). +

    MS Windows Workstation/Server Machine Trust Accounts

    + +A Machine Trust Account is an account that is used to authenticate a client +machine (rather than a user) to the Domain Controller server. In Windows terminology, +this is known as a “Computer Account.” The purpose of the machine account +is to prevent a rogue user and Domain Controller from colluding to gain access to a +domain member workstation. +

    +The password of a Machine Trust Account acts as the shared secret for +secure communication with the Domain Controller. This is a security feature to prevent an unauthorized machine with the same NetBIOS name from joining the domain and gaining access to domain user/group -accounts. Windows NT, 200x, XP Professional clients use machine trust -accounts, but Windows 9x / Me / XP Home clients do not. Hence, a -Windows 9x / Me / XP Home client is never a true member of a domain -because it does not possess a machine trust account, and thus has no -shared secret with the domain controller. +accounts. Windows NT/200x/XP Professional clients use machine trust +accounts, but Windows 9x/Me/XP Home clients do not. Hence, a +Windows 9x/Me/XP Home client is never a true member of a Domain +because it does not possess a Machine Trust Account, and, thus, has no +shared secret with the Domain Controller.

    -A Windows NT4 PDC stores each machine trust account in the Windows Registry. +A Windows NT4 PDC stores each Machine Trust Account in the Windows Registry. The introduction of MS Windows 2000 saw the introduction of Active Directory, -the new repository for machine trust accounts. -

    -A Samba PDC, however, stores each machine trust account in two parts, +the new repository for Machine Trust Accounts. A Samba PDC, however, stores +each Machine Trust Account in two parts, as follows:

    • A Domain Security Account (stored in the - passdb backend that has been configured in the + passdb backend that has been configured in the smb.conf file. The precise nature of the account information that is stored depends on the type of backend database that has been chosen.

      The older format of this data is the smbpasswd database - which contains the UNIX login ID, the UNIX user identifier (UID), and the + that contains the UNIX login ID, the UNIX user identifier (UID), and the LanMan and NT encrypted passwords. There is also some other information in this file that we do not need to concern ourselves with here.

      - The two newer database types are called ldapsam, - tdbsam. Both store considerably more data than the + The two newer database types are called ldapsam, and + tdbsam. Both store considerably more data than the older smbpasswd file did. The extra information - enables new user account controls to be used. + enables new user account controls to be implemented.

    • A corresponding UNIX account, typically stored in - /etc/passwd. Work is in progress to allow a + /etc/passwd. Work is in progress to allow a simplified mode of operation that does not require UNIX user accounts, but this may not be a feature of the early releases of Samba-3.

    -

    -There are three ways to create machine trust accounts: +

    + +There are three ways to create Machine Trust Accounts:

    • Manual creation from the UNIX/Linux command line. Here, both the Samba and corresponding UNIX account are created by hand.

    • - - Using the MS Windows NT4 Server Manager (either from an NT4 Domain member - server, or using the Nexus toolkit available from the Microsoft web site. - This tool can be run from any MS Windows machine so long as the user is + + Using the MS Windows NT4 Server Manager, either from an NT4 Domain Member + server, or using the Nexus toolkit available from the Microsoft Web site. + This tool can be run from any MS Windows machine as long as the user is logged on as the administrator account.

    • - "On-the-fly" creation. The Samba machine trust account is automatically + “On-the-fly” creation. The Samba Machine Trust Account is automatically created by Samba at the time the client is joined to the domain. (For security, this is the recommended method.) The corresponding UNIX account may be created automatically or manually. -

    Manual Creation of Machine Trust Accounts

    -The first step in manually creating a machine trust account is to manually +

    Manual Creation of Machine Trust Accounts

    +The first step in manually creating a Machine Trust Account is to manually create the corresponding UNIX account in /etc/passwd. -This can be done using vipw or another 'add user' command -that is normally used to create new UNIX accounts. The following is an example for a Linux based Samba server: - - - - +This can be done using vipw or another “add user” command +that is normally used to create new UNIX accounts. The following is an example for +a Linux-based Samba server:

    + +

    -root# /usr/sbin/useradd -g 100 -d /dev/null -c "machine nickname" \
    +root# /usr/sbin/useradd -g machines -d /dev/null -c "machine nickname" \
        -s /bin/false machine_name$ 
     
     root# passwd -l machine_name$
     

    -

    - +

    In the above example above there is an existing system group “machines” which is used +as the primary group for all machine accounts. In the following examples the “machines” group has +numeric GID equal 100.

    + On *BSD systems, this can be done using the chpass utility:

     root# chpass -a \
    -  "machine_name$:*:101:100::0:0:Workstation machine_name:/dev/null:/sbin/nologin"
    +'machine_name$:*:101:100::0:0:Windows machine_name:/dev/null:/sbin/nologin'
     

    The /etc/passwd entry will list the machine name -with a "$" appended, won't have a password, will have a null shell and no -home directory. For example a machine named 'doppy' would have an +with a “$” appended, will not have a password, will have a null shell and no +home directory. For example, a machine named “doppy” would have an /etc/passwd entry like this:

     doppy$:x:505:100:machine_nickname:/dev/null:/bin/false
    @@ -1605,13 +1711,13 @@ doppy$:x:505:100:machine_nickname:/dev/null:
     Above, machine_nickname can be any
     descriptive name for the client, i.e., BasementComputer.
     machine_name absolutely must be the NetBIOS
    -name of the client to be joined to the domain.  The "$" must be
    +name of the client to be joined to the domain. The “$” must be
     appended to the NetBIOS name of the client or Samba will not recognize
    -this as a machine trust account.
    +this as a Machine Trust Account.
     

    Now that the corresponding UNIX account has been created, the next step is to create the Samba account for the client containing the well-known initial -machine trust account password. This can be done using the +Machine Trust Account password. This can be done using the smbpasswd command as shown here:

    @@ -1620,267 +1726,282 @@ as shown here:

    where machine_name is the machine's NetBIOS -name. The RID of the new machine account is generated from the UID of +name. The RID of the new machine account is generated from the UID of the corresponding UNIX account.

    Join the client to the domain immediately

    - Manually creating a machine trust account using this method is the - equivalent of creating a machine trust account on a Windows NT PDC using - - the Server Manager. From the time at which the - account is created to the time which the client joins the domain and - changes the password, your domain is vulnerable to an intruder joining - your domain using a machine with the same NetBIOS name. A PDC inherently - trusts members of the domain and will serve out a large degree of user - information to such clients. You have been warned! -

    Using NT4 Server Manager to Add Machine Accounts to the Domain

    +Manually creating a Machine Trust Account using this method is the +equivalent of creating a Machine Trust Account on a Windows NT PDC using + +the Server Manager. From the time at which the +account is created to the time the client joins the domain and +changes the password, your domain is vulnerable to an intruder joining +your domain using a machine with the same NetBIOS name. A PDC inherently +trusts members of the domain and will serve out a large degree of user +information to such clients. You have been warned! +

    Managing Domain Machine Accounts using NT4 Server Manager

    +A working add machine script script is essential +for machine trust accounts to be automatically created. This applies no matter whether +one uses automatic account creation, or if one wishes to use the NT4 Domain Server Manager. +

    + If the machine from which you are trying to manage the domain is an -MS Windows NT4 workstation or MS Windows 200x / XP Professional -then the tool of choice is the package called SRVTOOLS.EXE. -When executed in the target directory this will unpack SrvMge.exe +MS Windows NT4 workstation or MS Windows 200x/XP Professional, +the tool of choice is the package called SRVTOOLS.EXE. +When executed in the target directory it will unpack SrvMgr.exe and UsrMgr.exe (both are domain management tools for MS Windows NT4 workstation).

    + If your workstation is a Microsoft Windows 9x/Me family product you should download the Nexus.exe package from the Microsoft web site. When executed from the target directory this will unpack the same tools but for use on this platform.

    Further information about these tools may be obtained from the following locations: -http://support.microsoft.com/default.aspx?scid=kb;en-us;173673 -http://support.microsoft.com/default.aspx?scid=kb;en-us;172540 +

    +

    http://support.microsoft.com/default.aspx?scid=kb;en-us;173673
    http://support.microsoft.com/default.aspx?scid=kb;en-us;172540

    Launch the srvmgr.exe (Server Manager for Domains) and follow these steps:

    Procedure 7.1. Server Manager Account Machine Account Management

    1. - From the menu select Computer + From the menu select Computer.

    2. - Click on Select Domain + Click Select Domain.

    3. - Click on the name of the domain you wish to administer in the + Click the name of the domain you wish to administer in the Select Domain panel and then click OK.

    4. - Again from the menu select Computer + Again from the menu select Computer.

    5. - Select Add to Domain + Select Add to Domain.

    6. - In the dialog box, click on the radio button to + In the dialog box, click the radio button to Add NT Workstation of Server, then - enter the machine name in the field provided, then click the + enter the machine name in the field provided, and click the Add button. -

    "On-the-Fly" Creation of Machine Trust Accounts

    -The second (and recommended) way of creating machine trust accounts is +

    On-the-Fly Creation of Machine Trust Accounts

    +The second (and recommended) way of creating Machine Trust Accounts is simply to allow the Samba server to create them as needed when the client is joined to the domain. -

    Since each Samba machine trust account requires a corresponding UNIX account, a method +

    Since each Samba Machine Trust Account requires a corresponding UNIX account, a method for automatically creating the UNIX account is usually supplied; this requires configuration of the -add machine script option in -smb.conf. This method is not required, however; corresponding UNIX +add machine script option in smb.conf. This method is not required, however, corresponding UNIX accounts may also be created manually.

    -Below is an example for a RedHat Linux system. -

    [global]
    # <...remainder of parameters...>
    add machine script = /usr/sbin/useradd -d /dev/null -g 100 -s /bin/false -M %u

    Making an MS Windows Workstation or Server a Domain Member

    -The procedure for making an MS Windows workstation of server a member of the domain varies -with the version of Windows: -

    Windows 200x XP Professional

    - When the user elects to make the client a domain member, Windows 200x prompts for +Here is an example for a Red Hat Linux system. +

    [global]
    # <...remainder of parameters...>
    add machine script = /usr/sbin/useradd -d /dev/null -g 100 \
    -s /bin/false -M %u

    Making an MS Windows Workstation or Server a Domain Member

    +The procedure for making an MS Windows workstation or server a member of the domain varies +with the version of Windows. +

    Windows 200x/XP Professional Client

    + When the user elects to make the client a Domain Member, Windows 200x prompts for an account and password that has privileges to create machine accounts in the domain. - A Samba administrative account (i.e., a Samba account that has root privileges on the + A Samba Administrator Account (i.e., a Samba account that has root privileges on the Samba server) must be entered here; the operation will fail if an ordinary user account is given.

    - Note: For security reasons the password for this administrative account should be set - to a password that is other than that used for the root user in the - /etc/passwd. -

    - The name of the account that is used to create domain member machine accounts can be - anything the network administrator may choose. If it is other than root - then this is easily mapped to root using the file pointed to be the smb.conf parameter - username map = /etc/samba/smbusers. -

    - The session key of the Samba administrative account acts as an - encryption key for setting the password of the machine trust - account. The machine trust account will be created on-the-fly, or - updated if it already exists. -

    Windows NT4

    - If the machine trust account was created manually, on the + For security reasons, the password for this Administrator Account should be set + to a password that is other than that used for the root user in /etc/passwd. +

    + The name of the account that is used to create Domain Member machine accounts can be + anything the network administrator may choose. If it is other than root + then this is easily mapped to root in the file named in the smb.conf parameter + username map = /etc/samba/smbusers. +

    + The session key of the Samba Administrator Account acts as an encryption key for setting the password of the machine trust + account. The Machine Trust Account will be created on-the-fly, or updated if it already exists. +

    Windows NT4 Client

    + If the Machine Trust Account was created manually, on the Identification Changes menu enter the domain name, but do not check the box Create a Computer Account in the Domain. - In this case, the existing machine trust account is used to join the machine + In this case, the existing Machine Trust Account is used to join the machine to the domain.

    - If the machine trust account is to be created - on-the-fly, on the Identification Changes menu enter the domain - name, and check the box Create a Computer Account in the - Domain. In this case, joining the domain proceeds as above - for Windows 2000 (i.e., you must supply a Samba administrative account when + If the Machine Trust Account is to be created on-the-fly, on the Identification Changes menu enter the domain + name and check the box Create a Computer Account in the Domain. In this case, joining + the domain proceeds as above for Windows 2000 (i.e., you must supply a Samba Administrator Account when prompted). -

    Samba

    Joining a Samba client to a domain is documented in - the domain member chapter. +

    Samba Client

    Joining a Samba client to a domain is documented in + .

    Domain Member Server

    This mode of server operation involves the Samba machine being made a member of a domain security context. This means by definition that all user authentication will be done from a centrally defined authentication regime. -The authentication regime may come from an NT3/4 style (old domain technology) +The authentication regime may come from an NT3/4-style (old domain technology) server, or it may be provided from an Active Directory server (ADS) running on MS Windows 2000 or later.

    -Of course it should be clear that the authentication back end itself could be +Of course it should be clear that the authentication backend itself could be from any distributed directory architecture server that is supported by Samba. -This can be LDAP (from OpenLDAP), or Sun's iPlanet, of NetWare Directory -Server, etc. +This can be LDAP (from OpenLDAP), or Sun's iPlanet, or NetWare Directory +Server, and so on. -

    -Please refer to the chapter on setting up a PDC -for more information regarding how to create a domain -machine account for a domain member server as well as for information -regarding how to enable the Samba domain member machine to join the domain and -to be fully trusted by it. -

    Joining an NT4 type Domain with Samba-3

    -

    Table 7.1. Assumptions

    NetBIOS name:SERV1
    Win2K/NT domain name:MIDEARTH
    Domain's PDC NetBIOS name:DOMPDC
    Domain's BDC NetBIOS names:DOMBDC1 and DOMBDC2

    -

    -First, you must edit your smb.conf file to tell Samba it should -now use domain security. +

    Note

    +When Samba is configured to use an LDAP, or other identity management and/or +directory service, it is Samba that continues to perform user and machine +authentication. It should be noted that the LDAP server does not perform +authentication handling in place of what Samba is designed to do. +

    +Please refer to , for more information regarding +how to create a domain machine account for a Domain Member server as well as for +information on how to enable the Samba Domain Member machine to join the domain +and be fully trusted by it. +

    Joining an NT4-type Domain with Samba-3

    lists names that have been used in the remainder of this chapter.

    Table 7.1. Assumptions

    NetBIOS name:SERV1
    Windows 200x/NT domain name:MIDEARTH
    Domain's PDC NetBIOS name:DOMPDC
    Domain's BDC NetBIOS names:DOMBDC1 and DOMBDC2

    +First, you must edit your smb.conf file to tell Samba it should now use domain security.

    Change (or add) your - security line in the [global] section + security line in the [global] section of your smb.conf to read:

    security = domain

    -Next change the workgroup line in the [global] +Next change the workgroup line in the [global] section to read:

    workgroup = MIDEARTH

    -as this is the name of the domain we are joining. +This is the name of the domain we are joining.

    -You must also have the parameter -encrypt passwords set to yes - in order for your users to authenticate to the NT PDC. +You must also have the parameter encrypt passwords +set to yes in order for your users to authenticate to the NT PDC. +This is the defaulty setting if this parameter is not specified. There is no need to specify this +parameter, but if it is specified in the smb.conf file, it must be set to Yes.

    -Finally, add (or modify) a password server line in the [global] +Finally, add (or modify) a password server line in the [global] section to read:

    password server = DOMPDC DOMBDC1 DOMBDC2

    -These are the primary and backup domain controllers Samba +These are the primary and backup Domain Controllers Samba will attempt to contact in order to authenticate users. Samba will try to contact each of these servers in order, so you may want to rearrange this list in order to spread out the authentication load -among domain controllers. +among Domain Controllers.

    -Alternatively, if you want smbd to automatically determine -the list of Domain controllers to use for authentication, you may +Alternately, if you want smbd to automatically determine +the list of Domain Controllers to use for authentication, you may set this line to be:

    password server = *

    -This method allows Samba to use exactly the same mechanism that NT does. This -method either broadcasts or uses a WINS database in order to -find domain controllers to authenticate against. +This method allows Samba to use exactly the same mechanism that NT does. The +method either uses broadcast-based name resolution, performs a WINS database +lookup in order to find a Domain Controller against which to authenticate, +or locates the Domain Controller using DNS name resolution.

    -In order to actually join the domain, you must run this command: +To join the domain, run this command:

    -root# net rpc join -S DOMPDC -UAdministrator%password
    +root# net join -S DOMPDC -UAdministrator%password
     

    -If the -S DOMPDC argument is not given then -the domain name will be obtained from smb.conf. -

    -As we are joining the domain DOM and the PDC for that domain -(the only machine that has write access to the domain SAM database) -is DOMPDC, we use it for the -S option. -The Administrator%password is -the login name and password for an account which has the necessary -privilege to add machines to the domain. If this is successful -you will see the message: +If the -S DOMPDC argument is not given, the domain name will be obtained from smb.conf.

    +The machine is joining the domain DOM, and the PDC for that domain (the only machine +that has write access to the domain SAM database) is DOMPDC, therefore use the -S +option. The Administrator%password is the login name and +password for an account that has the necessary privilege to add machines to the +domain. If this is successful, you will see the message in your terminal window the +text shown below. Where the older NT4 style domain architecture is used: +

     Joined domain DOM.
    -or Joined 'SERV1' to realm 'MYREALM'
    +

    +

    +Where Active Directory is used: +

    +Joined SERV1 to realm MYREALM.
    +

    -in your terminal window. See the -net man page for more details. +Refer to the net man page for further information.

    This process joins the server to the domain without having to create the machine trust account on the PDC beforehand.

    -This command goes through the machine account password -change protocol, then writes the new (random) machine account -password for this Samba server into a file in the same directory -in which an smbpasswd file would be stored - normally: -

    +This command goes through the machine account password change protocol, then writes +the new (random) machine account password for this Samba server into a file in the +same directory in which a smbpasswd file would be normally stored: +

     /usr/local/samba/private/secrets.tdb
    +or 
    +/etc/samba/secrets.tdb.
    +

    -This file is created and owned by root and is not -readable by any other user. It is the key to the domain-level -security for your system, and should be treated as carefully +This file is created and owned by root and is not readable by any other user. It is +the key to the Domain-level security for your system, and should be treated as carefully as a shadow password file.

    -Finally, restart your Samba daemons and get ready for -clients to begin using domain security! The way you can restart your -samba daemons depends on your distribution, but in most cases running +Finally, restart your Samba daemons and get ready for clients to begin using domain +security. The way you can restart your Samba daemons depends on your distribution, +but in most cases the following will suffice:

    -	root# /etc/init.d/samba restart
    +root# /etc/init.d/samba restart
     

    -does the job. -

    Why is this better than security = server?

    -Currently, domain security in Samba doesn't free you from +

    Why Is This Better Than security = server?

    +Currently, domain security in Samba does not free you from having to create local UNIX users to represent the users attaching -to your server. This means that if domain user DOM\fred - attaches to your domain security Samba server, there needs +to your server. This means that if Domain user DOM\fred + attaches to your Domain Security Samba server, there needs to be a local UNIX user fred to represent that user in the UNIX -filesystem. This is very similar to the older Samba security mode -security = server, +file system. This is similar to the older Samba security mode +security = server, where Samba would pass through the authentication request to a Windows NT server in the same way as a Windows 95 or Windows 98 server would.

    - Please refer to the chapter on winbind for information on a system -to automatically assign UNIX uids and gids to Windows NT Domain users and groups. +Please refer to , for information on a system +to automatically assign UNIX UIDs and GIDs to Windows NT Domain users and groups.

    -The advantage to domain-level security is that the -authentication in domain-level security is passed down the authenticated +The advantage to Domain-level security is that the +authentication in Domain-level security is passed down the authenticated RPC channel in exactly the same way that an NT server would do it. This means Samba servers now participate in domain trust relationships in exactly the same way NT servers do (i.e., you can add Samba servers into a resource domain and have the authentication passed on from a resource domain PDC to an account domain PDC).

    -In addition, with security = server every Samba +In addition, with security = server, every Samba daemon on a server has to keep a connection open to the authenticating server for as long as that daemon lasts. This can drain the connection resources on a Microsoft NT server and cause it to run -out of available connections. With security = domain, +out of available connections. With security = domain, however, the Samba daemons connect to the PDC/BDC only for as long -as is necessary to authenticate the user, and then drop the connection, +as is necessary to authenticate the user and then drop the connection, thus conserving PDC connection resources.

    And finally, acting in the same manner as an NT server authenticating to a PDC means that as part of the authentication reply, the Samba server gets the user identification information such -as the user SID, the list of NT groups the user belongs to, etc. +as the user SID, the list of NT groups the user belongs to, and so on.

    Note

    -Much of the text of this document -was first published in the Web magazine -LinuxWorld as the article Doing -the NIS/NT Samba. -

    Samba ADS Domain Membership

    -This is a rough guide to setting up Samba 3.0 with Kerberos authentication against a -Windows2000 KDC. A familiarity with Kerberos is assumed. -

    Setup your smb.conf

    -You must use at least the following 3 options in smb.conf: -

    realm = your.kerberos.REALM
    security = ADS
    encrypt passwords = yes

    -In case samba can't figure out your ads server using your realm name, use the -ads server option in smb.conf: -

    ads server = your.kerberos.server

    +Much of the text of this document was first published in the Web magazine +LinuxWorld as the article http://www.linuxworld.com/linuxworld/lw-1998-10/lw-10-samba.html +Doing the NIS/NT Samba. +

    Samba ADS Domain Membership

    + + + + +This is a rough guide to setting up Samba-3 with Kerberos authentication against a +Windows 200x KDC. A familiarity with Kerberos is assumed. +

    Configure smb.conf

    +You must use at least the following three options in smb.conf: +

    realm = your.kerberos.REALM
    security = ADS
    # The following parameter need only be specified if present.
    # The default setting is not present is Yes.
    encrypt passwords = yes

    +In case samba cannot correctly identify the appropriate ADS server using the realm name, use the +password server option in smb.conf: +

    password server = your.kerberos.server

    Note

    You do not need a smbpasswd file, and older clients will be authenticated as -if security = domain, although it won't do any harm and -allows you to have local users not in the domain. It is expected that the above -required options will change soon when active directory integration will get -better. -

    Setup your /etc/krb5.conf

    -The minimal configuration for krb5.conf is: +if security = domain, although it will not do any harm and +allows you to have local users not in the domain. +

    Configure /etc/krb5.conf

    + + +With both MIT and Heimdal Kerberos, this is unnecessary, and may be detrimental. All ADS +domains will automatically create SRV records in the DNS zone _kerberos.REALM.NAME for +each KDC in the realm. MIT's, as well as Heimdal's, KRB5 libraries default to checking +for these records, so they will automatically find the KDCs. In addition, +krb5.conf only allows specifying a single KDC, even there if there is more +than one. Using the DNS lookup allows the KRB5 libraries to use whichever KDCs are available. +

    +When manually configuring krb5.conf, the minimal configuration is:

     [libdefaults]
        default_realm = YOUR.KERBEROS.REALM
    @@ -1889,92 +2010,146 @@ The minimal configuration for krb5.conf is:
     	YOUR.KERBEROS.REALM = {
     	kdc = your.kerberos.server
     	    }
    -

    +

    +When using Heimdal versions before 0.6 use the following configuration settings: +

    +[libdefaults]
    +   default_realm      = YOUR.KERBEROS.REALM
    +   default_etypes     = des-cbc-crc des-cbc-md5
    +   default_etypes_des = des-cbc-crc des-cbc-md5
    +
    +        [realms]
    +        YOUR.KERBEROS.REALM = {
    +        kdc = your.kerberos.server
    +            }
    +

    +

    + Test your config by doing a kinit USERNAME@REALM and making sure that your password is accepted by the Win2000 KDC. +

    +With Heimdal versions earlier than 0.6.x you only can use newly created accounts +in ADS or accounts that have had the password changed once after migration, or +in case of Administrator after installation. At the +moment, a Windows 2003 KDC can only be used with a Heimdal releases later than 0.6 +(and no default etypes in krb5.conf). Unfortunatly this whole area is still +in a state of flux.

    Note

    -The realm must be uppercase or you will get Cannot find KDC for -requested realm while getting initial credentials error (Kerberos +The realm must be in uppercase or you will get “Cannot find KDC for +requested realm while getting initial credentials” error (Kerberos is case-sensitive!).

    Note

    -Time between the two servers must be synchronized. You will get a -kinit(v5): Clock skew too great while getting initial credentials +Time between the two servers must be synchronized. You will get a +“kinit(v5): Clock skew too great while getting initial credentials” if the time difference is more than five minutes.

    +Clock skew limits are configurable in the Kerberos protocols. The default setting is +five minutes. +

    You also must ensure that you can do a reverse DNS lookup on the IP address of your KDC. Also, the name that this reverse lookup maps to -must either be the NetBIOS name of the KDC (ie. the hostname with no -domain attached) or it can alternatively be the NetBIOS name -followed by the realm. +must either be the NetBIOS name of the KDC (i.e., the hostname with no +domain attached) or it can alternately be the NetBIOS name followed by the realm.

    The easiest way to ensure you get this right is to add a /etc/hosts entry mapping the IP address of your KDC to -its NetBIOS name. If you don't get this right then you will get a +its NetBIOS name. If you do not get this correct then you will get a local error when you try to join the realm.

    If all you want is Kerberos support in smbclient then you can skip -straight to Test with smbclient now. -Creating a computer account -and testing your servers -is only needed if you want Kerberos support for smbd and winbindd. -

    Create the computer account

    -As a user that has write permission on the Samba private directory -(usually root) run: +directly to now. + and +are needed only if you want Kerberos support for smbd and winbindd. +

    Create the Computer Account

    +As a user who has write permission on the Samba private directory (usually root), run:

     root#  net ads join -U Administrator%password
     

    -

    Possible errors

    +

    +When making a Windows client a member of an ADS domain within a complex organization, you +may want to create the machine account within a particular organizational unit. Samba-3 permits +this to be done using the following syntax: +

    +root#   kinit Administrator@your.kerberos.REALM
    +root#  net ads join “organizational_unit
    +

    +

    +For example, you may want to create the machine account in a container called “Servers” +under the organizational directory “Computers\BusinessUnit\Department” like this: +

    +root#  net ads join "Computers\BusinessUnit\Department\Servers"
    +

    +

    Possible Errors

    ADS support not compiled in

    Samba must be reconfigured (remove config.cache) and recompiled - (make clean all install) after the Kerberos libs and headers are installed. + (make clean all install) after the Kerberos libiraries and headers files are installed.

    net ads join prompts for user name

    You need to login to the domain using kinit USERNAME@REALM. USERNAME must be a user who has rights to add a machine - to the domain.

    -

    Test your server setup

    + to the domain.

    Unsupported encryption/or checksum types

    + Make sure that the /etc/krb5.conf is correctly configured + for the type and version of Kerberos installed on the system. +

    +

    Testing Server Setup

    If the join was successful, you will see a new computer account with the -NetBIOS name of your Samba server in Active Directory (in the "Computers" +NetBIOS name of your Samba server in Active Directory (in the “Computers” folder under Users and Computers.

    -On a Windows 2000 client try net use * \\server\share. You should -be logged in with Kerberos without needing to know a password. If -this fails then run klist tickets. Did you get a ticket for the -server? Does it have an encoding type of DES-CBC-MD5 ? -

    Testing with smbclient

    +On a Windows 2000 client, try net use * \\server\share. You should +be logged in with Kerberos without needing to know a password. If this fails then run +klist tickets. Did you get a ticket for the server? Does it have +an encryption type of DES-CBC-MD5? +

    Note

    +Samba can use both DES-CBC-MD5 encryption as well as ARCFOUR-HMAC-MD5 encoding. +

    Testing with smbclient

    + On your Samba server try to login to a Win2000 server or your Samba server using smbclient and Kerberos. Use smbclient as usual, but specify the -k option to choose Kerberos authentication. -

    Notes

    +

    Notes

    You must change administrator password at least once after DC -install, to create the right encoding types -

    -W2k doesn't seem to create the _kerberos._udp and _ldap._tcp in -their defaults DNS setup. Maybe this will be fixed later in service packs. -

    Common Errors

    -In the process of adding / deleting / re-adding domain member machine accounts there are -many traps for the unwary player and there are many “little” things that can go wrong. -It is particularly interesting how often subscribers on the samba mailing list have concluded -after repeated failed attempts to add a machine account that it is necessary to "re-install" -MS Windows on t he machine. In truth, it is seldom necessary to reinstall because of this type -of problem. The real solution is often very simple, and with understanding of how MS Windows -networking functions easy to overcome. -

    Can Not Add Machine Back to Domain

    -“ A Windows workstation was reinstalled. The original domain machine +install, to create the right encryption types. +

    +Windows 200x does not seem to create the _kerberos._udp and _ldap._tcp in +the default DNS setup. Perhaps this will be fixed later in service packs. +

    Sharing User ID Mappings between Samba Domain Members

    +Samba maps UNIX users and groups (identified by UIDs and GIDs) to Windows users and groups (identified by SIDs). +These mappings are done by the idmap subsystem of Samba. +

    +In some cases it is useful to share these mappings between Samba Domain Members, +so name->id mapping is identical on all machines. +This may be needed in particular when sharing files over both CIFS and NFS. +

    To use the LDAP ldap idmap suffix, set:

    ldap idmap suffix = ou=Idmap,dc=quenya,dc=org

    See the smb.conf man page entry for the ldap idmap suffix +parameter for further information.

    +Do not forget to specify also the ldap admin dn +and to make certain to set the LDAP administrative password into the secrets.tdb using: +

    +root#  smbpasswd -w ldap-admin-password
    +

    Common Errors

    +In the process of adding/deleting/re-adding Domain Member machine accounts, there are +many traps for the unwary player and many “little” things that can go wrong. +It is particularly interesting how often subscribers on the Samba mailing list have concluded +after repeated failed attempts to add a machine account that it is necessary to “re-install” +MS Windows on the machine. In truth, it is seldom necessary to reinstall because of this type +of problem. The real solution is often quite simple and with an understanding of how MS Windows +networking functions, it is easy to overcome. +

    Cannot Add Machine Back to Domain

    +“A Windows workstation was re-installed. The original domain machine account was deleted and added immediately. The workstation will not join the domain if I use the same machine name. Attempts to add the machine fail with a message that the machine already -exists on the network - I know it doesn't. Why is this failing?” +exists on the network I know it does not. Why is this failing?”

    The original name is still in the NetBIOS name cache and must expire after machine account -deletion BEFORE adding that same name as a domain member again. The best advice is to delete -the old account and then to add the machine with a new name. -

    Adding Machine to Domain Fails

    - “Adding a Windows 200x or XP Professional machine to the Samba PDC Domain fails with a -message that, The machine could not be added at this time, there is a network problem. - Please try again later. Why?” -

    -You should check that there is an add machine script in your smb.conf +deletion before adding that same name as a Domain Member again. The best advice is to delete +the old account and then add the machine with a new name. +

    Adding Machine to Domain Fails

    +“Adding a Windows 200x or XP Professional machine to the Samba PDC Domain fails with a +message that, `The machine could not be added at this time, there is a network problem. +Please try again later.' Why?” +

    +You should check that there is an add machine script in your smb.conf file. If there is not, please add one that is appropriate for your OS platform. If a script -has been defined you will need to debug it's operation. Increase the log level +has been defined, you will need to debug its operation. Increase the log level in the smb.conf file to level 10, then try to rejoin the domain. Check the logs to see which operation is failing.

    @@ -1982,98 +2157,101 @@ Possible causes include:

    • The script does not actually exist, or could not be located in the path specified.

      - Corrective Action: Fix it. Make sure that when run manually - that the script will add both the UNIX system account _and_ the Samba SAM account. + Corrective action: Fix it. Make sure when run manually + that the script will add both the UNIX system account and the Samba SAM account.

    • - The machine could not be added to the UNIX system accounts file /etc/passwd + The machine could not be added to the UNIX system accounts file /etc/passwd.

      - Corrective Action: Check that the machine name is a legal UNIX - system account name. ie: If the UNIX utility useradd is called + Corrective action: Check that the machine name is a legal UNIX + system account name. If the UNIX utility useradd is called, then make sure that the machine name you are trying to add can be added using this tool. Useradd on some systems will not allow any upper case characters nor will it allow spaces in the name. -

    Chapter 8. Stand-Alone Servers

    John H. Terpstra

    Samba Team

    -Stand-Alone servers are independent of Domain Controllers on the network. -They are NOT domain members and function more like workgroup servers. In many -cases a stand-alone server is configured with a minimum of security control +

    +The add machine script does not create the +machine account in the Samba backend database, it is there only to create a UNIX system +account to which the Samba backend database account can be mapped. +

    I Can't Join a Windows 2003 PDC

    Windows 2003 requires SMB signing. Client side SMB signing has been implemented in Samba-3.0. + Set client use spnego = yes when communicating + with a Windows 2003 server.

    Chapter 8. Stand-alone Servers

    John H. Terpstra

    Samba Team

    +Stand-alone Servers are independent of Domain Controllers on the network. +They are not Domain Members and function more like workgroup servers. In many +cases a Stand-alone Server is configured with a minimum of security control with the intent that all data served will be readily accessible to all users. -

    Features and Benefits

    -Stand-Alone servers can be as secure or as insecure as needs dictate. They can +

    Features and Benefits

    +Stand-alone Servers can be as secure or as insecure as needs dictate. They can have simple or complex configurations. Above all, despite the hoopla about -Domain security they remain a very common installation. +Domain Security they remain a common installation.

    If all that is needed is a server for read-only files, or for -printers alone, it may not make sense to affect a complex installation. +printers alone, it may not make sense to effect a complex installation. For example: A drafting office needs to store old drawings and reference -standards. No-one can write files to the server as it is legislatively -important that all documents remain unaltered. A share mode read-only stand-alone -server is an ideal solution. +standards. Noone can write files to the server as it is legislatively +important that all documents remain unaltered. A share mode read-only Stand-alone +Server is an ideal solution.

    Another situation that warrants simplicity is an office that has many printers that are queued off a single central server. Everyone needs to be able to print -to the printers, there is no need to affect any access controls and no files will -be served from the print server. Again a share mode stand-alone server makes +to the printers, there is no need to effect any access controls and no files will +be served from the print server. Again, a share mode Stand-alone Server makes a great solution. -

    Background

    -The term stand-alone server means that the server +

    Background

    +The term Stand-alone Server means that it will provide local authentication and access control for all resources that are available from it. In general this means that there will be a -local user database. In more technical terms, it means that resources +local user database. In more technical terms, it means resources on the machine will be made available in either SHARE mode or in USER mode.

    No special action is needed other than to create user accounts. Stand-alone -servers do NOT provide network logon services. This means that machines that -use this server do NOT perform a domain logon to it. Whatever logon facility -the workstations are subject to is independent of this machine. It is however -necessary to accommodate any network user so that the logon name they use will -be translated (mapped) locally on the stand-alone server to a locally known +servers do not provide network logon services. This means that machines that +use this server do not perform a domain logon to it. Whatever logon facility +the workstations are subject to is independent of this machine. It is, however, +necessary to accommodate any network user so the logon name they use will +be translated (mapped) locally on the Stand-alone Server to a locally known user name. There are several ways this can be done.

    Samba tends to blur the distinction a little in respect of what is -a stand-alone server. This is because the authentication database may be -local or on a remote server, even if from the Samba protocol perspective -the Samba server is NOT a member of a domain security context. +a Stand-alone Server. This is because the authentication database may be +local or on a remote server, even if from the SMB protocol perspective +the Samba server is not a member of a domain security context.

    -Through the use of PAM (Pluggable Authentication Modules) and nsswitch -(the name service switcher, which maintains the unix user database) the source of authentication may reside on +Through the use of Pluggable Authentication Modules (PAM) and the name service switcher (NSSWITCH), +which maintains the UNIX-user database) the source of authentication may reside on another server. We would be inclined to call this the authentication server. This means that the Samba server may use the local UNIX/Linux system password database (/etc/passwd or /etc/shadow), may use a -local smbpasswd file, or may use -an LDAP back end, or even via PAM and Winbind another CIFS/SMB server +local smbpasswd file, or may use an LDAP backend, or even via PAM and Winbind another CIFS/SMB server for authentication. -

    Example Configuration

    -The following examples are designed to inspire simplicity. It is too easy to -attempt a high level of creativity and to introduce too much complexity in -server and network design. +

    Example Configuration

    +The examples, , and link linkend="SimplePrintServer"/>, +are designed to inspire simplicity. It is too easy to attempt a high level of creativity +and to introduce too much complexity in server and network design.

    Reference Documentation Server

    -Configuration of a read-only data server that EVERYONE can access is very simple. -Here is the smb.conf file that will do this. Assume that all the reference documents -are stored in the directory /export, that the documents are owned by a user other than -nobody. No home directories are shared, that are no users in the /etc/passwd -UNIX system database. This is a very simple system to administer. -

    Example 8.1. smb.conf for Reference Documentation Server

    # Global parameters
    [global]
    workgroup = MIDEARTH
    netbios name = GANDALF
    security = SHARE
    passdb backend = guest
    wins server = 192.168.1.1
    [data]
    comment = Data
    path = /export
    guest only = Yes

    -In the above example the machine name is set to REFDOCS, the workgroup is set to the name -of the local workgroup so that the machine will appear in with systems users are familiar -with. The only password backend required is the "guest" backend so as to allow default -unprivileged account names to be used. Given that there is a WINS server on this network -we do use it. +Configuration of a read-only data server that everyone can access is very simple. + is the smb.conf file that will do this. Assume that all the reference documents +are stored in the directory /export, and the documents are owned by a user other than +nobody. No home directories are shared, and there are no users in the /etc/passwd +UNIX system database. This is a simple system to administer. +

    Example 8.1. smb.conf for Reference Documentation Server

    # Global parameters
    [global]
    workgroup = MIDEARTH
    netbios name = GANDALF
    security = SHARE
    passdb backend = guest
    wins server = 192.168.1.1
    [data]
    comment = Data
    path = /export
    guest only = Yes

    +In above, the machine name is set to GANDALF, the workgroup is set to the name +of the local workgroup (MIDEARTH) so the machine will appear together with systems with +which users are familiar. The only password backend required is the “guest” backend to allow default +unprivileged account names to be used. As there is a WINS server on this networki, we of obviously make use of it.

    Central Print Serving

    -Configuration of a simple print server is very simple if you have all the right tools +Configuration of a simple print server is easy if you have all the right tools on your system.

    Assumptions:

    1. - The print server must require no administration + The print server must require no administration.

    2. The print spooling and processing system on our print server will be CUPS. - (Please refer to the chapter about CUPS for more information). + (Please refer to for more information).

    3. - All printers that the print server will service will be network - printers. They will be correctly configured, by the administrator, - in the CUPS environment. + The print server will service only network printers. The network administrator + will correctly configure the CUPS environment to support the printers.

    4. - All workstations will be installed using postscript drivers. The printer - of choice is the Apple Color LaserWriter. + All workstations will use only postscript drivers. The printer driver + of choice is the one shipped with the Windows OS for the Apple Color LaserWriter.

    In this example our print server will spool all incoming print jobs to /var/spool/samba until the job is ready to be submitted by @@ -2082,12 +2260,12 @@ the anonymous (guest) user, two things will be required:

    Enabling Anonymous Printing

    • The UNIX/Linux system must have a guest account. The default for this is usually the account nobody. - To find the correct name to use for your version of Samba do the + To find the correct name to use for your version of Samba, do the following:

       $ testparm -s -v | grep "guest account"
       

      - Then make sure that this account exists in your system password + Make sure that this account exists in your system password database (/etc/passwd).

    • The directory into which Samba will spool the file must have write @@ -2099,236 +2277,221 @@ the anonymous (guest) user, two things will be required: root# chmod a+rwt /var/spool/samba

    -

    Example 8.2. smb.conf for anonymous printing

    # Global parameters
    [global]
    workgroup = MIDEARTH
    netbios name = GANDALF
    security = SHARE
    passdb backend = guest
    wins server = noldor
    printing = cups
    printcap name = cups
    [printers]
    comment = All Printers
    path = /var/spool/samba
    printer admin = root
    guest ok = Yes
    printable = Yes
    use client driver = Yes
    browseable = No

    -

    Common Errors

    +The contents of the smb.conf file is shown in . +

    +

    Example 8.2. smb.conf for Anonymous Printing

    # Global parameters
    [global]
    workgroup = MIDEARTH
    netbios name = GANDALF
    security = SHARE
    passdb backend = guest
    printing = cups
    printcap name = cups
    [printers]
    comment = All Printers
    path = /var/spool/samba
    printer admin = root
    guest ok = Yes
    printable = Yes
    use client driver = Yes
    browseable = No

    +

    Note

    + + +On CUPS-enabled systems there is a facility to pass raw data directly to the printer without +intermediate processing via CUPS print filters. Where use of this mode of operation is desired, +it is necessary to configure a raw printing device. It is also necessary to enable the raw mime +handler in the /etc/mime.conv and /etc/mime.types +files. Refer to . +

    Common Errors

    The greatest mistake so often made is to make a network configuration too complex. It pays to use the simplest solution that will meet the needs of the moment. -

    Chapter 9. MS Windows Network Configuration Guide

    John H. Terpstra

    Samba Team

    Table of Contents

    Note

    Note

    +

    Chapter 9. MS Windows Network Configuration Guide

    John H. Terpstra

    Samba Team

    Table of Contents

    Note

    Note

    This chapter did not make it into this release. It is planned for the published release of this document. -

    Advanced Configuration

    Valuable Nuts and Bolts Information

    +

    Advanced Configuration

    Valuable Nuts and Bolts Information

    Samba has several features that you might want or might not want to use. The chapters in this part each cover specific Samba features. -

    Table of Contents

    10. Samba / MS Windows Network Browsing Guide
    Features and Benefits
    What is Browsing?
    Discussion
    NetBIOS over TCP/IP
    TCP/IP - without NetBIOS
    DNS and Active Directory
    How Browsing Functions
    Setting up WORKGROUP Browsing
    Setting up DOMAIN Browsing
    Forcing Samba to be the master
    Making Samba the domain master
    Note about broadcast addresses
    Multiple interfaces
    Use of the Remote Announce parameter
    Use of the Remote Browse Sync parameter
    WINS - The Windows Internetworking Name Server
    Setting up a WINS server
    WINS Replication
    Static WINS Entries
    Helpful Hints
    Windows Networking Protocols
    Name Resolution Order
    Technical Overview of browsing
    Browsing support in Samba
    Problem resolution
    Browsing across subnets
    Common Errors
    How can one flush the Samba NetBIOS name cache without restarting Samba?
    My client reports "This server is not configured to list shared resources"
    I get an Unable to browse the network error
    11. Account Information Databases
    Features and Benefits
    Backwards Compatibility Backends
    New Backends
    Technical Information
    Important Notes About Security
    Mapping User Identifiers between MS Windows and UNIX
    Mapping Common UIDs/GIDs on Distributed Machines
    Account Management Tools
    The smbpasswd Command
    The pdbedit Command
    Password Backends
    Plain Text
    smbpasswd - Encrypted Password Database
    tdbsam
    ldapsam
    MySQL
    XML
    Common Errors
    Users can not logon
    Users being added to wrong backend database
    auth methods does not work
    12. Mapping MS Windows and UNIX Groups
    Features and Benefits
    Discussion
    Example Configuration
    Configuration Scripts
    Sample smb.conf add group script
    Script to configure Group Mapping
    Common Errors
    Adding Groups Fails
    Adding MS Windows Groups to MS Windows Groups Fails
    Adding Domain Users to the Power Users group
    13. File, Directory and Share Access Controls
    Features and Benefits
    File System Access Controls
    MS Windows NTFS Comparison with UNIX File Systems
    Managing Directories
    File and Directory Access Control
    Share Definition Access Controls
    User and Group Based Controls
    File and Directory Permissions Based Controls
    Miscellaneous Controls
    Access Controls on Shares
    Share Permissions Management
    MS Windows Access Control Lists and UNIX Interoperability
    Managing UNIX permissions Using NT Security Dialogs
    Viewing File Security on a Samba Share
    Viewing file ownership
    Viewing File or Directory Permissions
    Modifying file or directory permissions
    Interaction with the standard Samba create mask - parameters
    Interaction with the standard Samba file attribute mapping
    Common Errors
    Users can not write to a public share
    I have set force user but Samba still makes root the owner of all the files I touch!
    MS Word with Samba changes owner of file
    14. File and Record Locking
    Features and Benefits
    Discussion
    Opportunistic Locking Overview
    Samba Opportunistic Locking Control
    Example Configuration
    MS Windows Opportunistic Locking and Caching Controls
    Workstation Service Entries
    Server Service Entries
    Persistent Data Corruption
    Common Errors
    locking.tdb error messages
    Problems saving files in MS Office on Windows XP
    Long delays deleting files over network with XP SP1
    Additional Reading
    15. Securing Samba
    Introduction
    Features and Benefits
    Technical Discussion of Protective Measures and Issues
    Using host based protection
    User based protection
    Using interface protection
    Using a firewall
    Using a IPC$ share deny
    NTLMv2 Security
    Upgrading Samba
    Common Errors
    Smbclient works on localhost, but the network is dead
    Why can users access home directories of other users?
    16. Interdomain Trust Relationships
    Features and Benefits
    Trust Relationship Background
    Native MS Windows NT4 Trusts Configuration
    Creating an NT4 Domain Trust
    Completing an NT4 Domain Trust
    Inter-Domain Trust Facilities
    Configuring Samba NT-style Domain Trusts
    Samba as the Trusted Domain
    Samba as the Trusting Domain
    NT4-style Domain Trusts with Windows 2000
    Common Errors
    17. Hosting a Microsoft Distributed File System tree on Samba
    Features and Benefits
    Common Errors
    18. Classical Printing Support
    Features and Benefits
    Technical Introduction
    What happens if you send a Job from a Client
    Printing Related Configuration Parameters
    Parameters Recommended for Use
    A simple Configuration to Print
    Verification of "Settings in Use" with testparm
    A little Experiment to warn you
    Extended Sample Configuration to Print
    Detailed Explanation of the Example's Settings
    The [global] Section
    The [printers] Section
    Any [my_printer_name] Section
    Print Commands
    Default Print Commands for various UNIX Print Subsystems
    Setting up your own Print Commands
    Innovations in Samba Printing since 2.2
    Client Drivers on Samba Server for Point'n'Print
    The [printer$] Section is removed from Samba 3
    Creating the [print$] Share
    Parameters in the [print$] Section
    Subdirectory Structure in [print$]
    Installing Drivers into [print$]
    Setting Drivers for existing Printers with a Client GUI
    Setting Drivers for existing Printers with -rpcclient
    Client Driver Install Procedure
    The first Client Driver Installation
    IMPORTANT! Setting Device Modes on new Printers
    Further Client Driver Install Procedures
    Always make first Client Connection as root or "printer admin"
    Other Gotchas
    Setting Default Print Options for the Client Drivers
    Supporting large Numbers of Printers
    Adding new Printers with the Windows NT APW
    Weird Error Message Cannot connect under a -different Name
    Be careful when assembling Driver Files
    Samba and Printer Ports
    Avoiding the most common Misconfigurations of the Client Driver
    The Imprints Toolset
    What is Imprints?
    Creating Printer Driver Packages
    The Imprints Server
    The Installation Client
    Add Network Printers at Logon without User Interaction
    The addprinter command
    Migration of "Classical" printing to Samba
    Publishing Printer Information in Active Directory or LDAP
    Common Errors
    I give my root password but I don't get access
    My printjobs get spooled into the spooling directory, but then get lost
    19. CUPS Printing Support in Samba 3.0
    Introduction
    Features and Benefits
    Overview
    Basic Configuration of CUPS support
    Linking of smbd with libcups.so
    Simple smb.conf Settings for CUPS
    More complex smb.conf Settings for -CUPS
    Advanced Configuration
    Central spooling vs. "Peer-to-Peer" printing
    CUPS/Samba as a "spooling-only" Print Server; "raw" printing -with Vendor Drivers on Windows Clients
    Driver Installation Methods on Windows Clients
    Explicitly enable "raw" printing for -application/octet-stream!
    Three familiar Methods for driver upload plus a new one
    Using CUPS/Samba in an advanced Way -- intelligent printing -with PostScript Driver Download
    GDI on Windows -- PostScript on UNIX
    Windows Drivers, GDI and EMF
    UNIX Printfile Conversion and GUI Basics
    PostScript and Ghostscript
    Ghostscript -- the Software RIP for non-PostScript Printers
    PostScript Printer Description (PPD) Specification
    CUPS can use all Windows-formatted Vendor PPDs
    CUPS also uses PPDs for non-PostScript Printers
    The CUPS Filtering Architecture
    MIME types and CUPS Filters
    MIME type Conversion Rules
    Filter Requirements
    Prefilters
    pstops
    pstoraster
    imagetops and imagetoraster
    rasterto [printers specific]
    CUPS Backends
    cupsomatic/Foomatic -- how do they fit into the Picture?
    The Complete Picture
    mime.convs
    "Raw" printing
    "application/octet-stream" printing
    PostScript Printer Descriptions (PPDs) for non-PS Printers
    Difference between cupsomatic/foomatic-rip and -native CUPS printing
    Examples for filtering Chains
    Sources of CUPS drivers / PPDs
    Printing with Interface Scripts
    Network printing (purely Windows)
    From Windows Clients to an NT Print Server
    Driver Execution on the Client
    Driver Execution on the Server
    Network Printing (Windows clients -- UNIX/Samba Print -Servers)
    From Windows Clients to a CUPS/Samba Print Server
    Samba receiving Jobfiles and passing them to CUPS
    Network PostScript RIP: CUPS Filters on Server -- clients use -PostScript Driver with CUPS-PPDs
    PPDs for non-PS Printers on UNIX
    PPDs for non-PS Printers on Windows
    Windows Terminal Servers (WTS) as CUPS Clients
    Printer Drivers running in "Kernel Mode" cause many -Problems
    Workarounds impose Heavy Limitations
    CUPS: a "Magical Stone"?
    PostScript Drivers with no major problems -- even in Kernel -Mode
    Setting up CUPS for driver Download
    cupsaddsmb: the unknown Utility
    Prepare your smb.conf for cupsaddsmb
    CUPS Package of "PostScript Driver for WinNT/2k/XP"
    Recognize the different Driver Files
    Acquiring the Adobe Driver Files
    ESP Print Pro Package of "PostScript Driver for -WinNT/2k/XP"
    Caveats to be considered
    Benefits of using "CUPS PostScript Driver for -Windows NT/2k/XP" instead of Adobe Driver
    Run "cupsaddsmb" (quiet Mode)
    Run "cupsaddsmb" with verbose Output
    Understanding cupsaddsmb
    How to recognize if cupsaddsmb completed successfully
    cupsaddsmb with a Samba PDC
    cupsaddsmb Flowchart
    Installing the PostScript Driver on a Client
    Avoiding critical PostScript Driver Settings on the -Client
    Installing PostScript Driver Files manually (using -rpcclient)
    A Check of the rpcclient man Page
    Understanding the rpcclient man page
    Producing an Example by querying a Windows Box
    What is required for adddriver and setdriver to succeed
    Manual Driver Installation in 15 Steps
    Troubleshooting revisited
    The printing *.tdb Files
    Trivial DataBase Files
    Binary Format
    Losing *.tdb Files
    Using tdbbackup
    CUPS Print Drivers from Linuxprinting.org
    foomatic-rip and Foomatic explained
    foomatic-rip and Foomatic-PPD Download and Installation
    Page Accounting with CUPS
    Setting up Quotas
    Correct and incorrect Accounting
    Adobe and CUPS PostScript Drivers for Windows Clients
    The page_log File Syntax
    Possible Shortcomings
    Future Developments
    Other Accounting Tools
    Additional Material
    Auto-Deletion or Preservation of CUPS Spool Files
    CUPS Configuration Settings explained
    Pre-conditions
    Manual Configuration
    In Case of Trouble.....
    Printing from CUPS to Windows attached -Printers
    More CUPS filtering Chains
    Common Errors
    Win9x client can't install driver
    "cupsaddsmb" keeps asking for root password in - neverending loop
    "cupsaddsmb" gives "No PPD file for printer..." - message while PPD file is present
    Client can't connect to Samba printer
    Can't reconnect to Samba under new account - from Win2K/XP
    Avoid being connected to the Samba server as the - "wrong" user
    Upgrading to CUPS drivers from Adobe drivers on - NT/2K/XP clients gives problems
    Can't use "cupsaddsmb" on Samba server which is - a PDC
    Deleted Win2K printer driver is still shown
    Win2K/XP "Local Security - Policies"
    WinXP clients: "Administrator can not install - printers for all local users"
    "Print Change Notify" functions on - NT-clients
    WinXP-SP1
    Print options for all users can't be set on Win2K/XP
    Most common blunders in driver - settings on Windows clients
    cupsaddsmb does not work - with newly installed printer
    Permissions on -/var/spool/samba/ get reset after each -reboot
    Printer named "lp" -intermittently swallows jobs and spits out completely different -ones
    Location of Adobe PostScript driver files necessary for "cupsaddsmb"
    An Overview of the CUPS Printing Processes
    20. Stackable VFS modules
    Features and Benefits
    Discussion
    Included modules
    audit
    extd_audit
    fake_perms
    recycle
    netatalk
    VFS modules available elsewhere
    DatabaseFS
    vscan
    21. Winbind: Use of Domain Accounts
    Features and Benefits
    Introduction
    What Winbind Provides
    Target Uses
    How Winbind Works
    Microsoft Remote Procedure Calls
    Microsoft Active Directory Services
    Name Service Switch
    Pluggable Authentication Modules
    User and Group ID Allocation
    Result Caching
    Installation and Configuration
    Introduction
    Requirements
    Testing Things Out
    Conclusion
    Common Errors
    NSCD Problem Warning
    22. Advanced Network Management
    Features and Benefits
    Remote Server Administration
    Remote Desktop Management
    Remote Management from NoMachines.Com
    Network Logon Script Magic
    Adding printers without user intervention
    Common Errors
    23. System and Account Policies
    Features and Benefits
    Creating and Managing System Policies
    Windows 9x/Me Policies
    Windows NT4 Style Policy Files
    MS Windows 200x / XP Professional Policies
    Managing Account/User Policies
    Samba Editreg Toolset
    Windows NT4/200x
    Samba PDC
    System Startup and Logon Processing Overview
    Common Errors
    Policy Does Not Work
    24. Desktop Profile Management
    Features and Benefits
    Roaming Profiles
    Samba Configuration for Profile Handling
    Windows Client Profile Configuration Information
    Sharing Profiles between W9x/Me and NT4/200x/XP workstations
    Profile Migration from Windows NT4/200x Server to Samba
    Mandatory profiles
    Creating/Managing Group Profiles
    Default Profile for Windows Users
    MS Windows 9x/Me
    MS Windows NT4 Workstation
    MS Windows 200x/XP
    Common Errors
    Setting up roaming profiles for just a few user's or group's?
    Can NOT use Roaming Profiles
    Changing the default profile
    25. PAM based Distributed Authentication
    Features and Benefits
    Technical Discussion
    PAM Configuration Syntax
    Example System Configurations
    smb.conf PAM Configuration
    Remote CIFS Authentication using winbindd.so
    Password Synchronization using pam_smbpass.so
    Common Errors
    pam_winbind problem
    Winbind is not resolving users and groups
    26. Integrating MS Windows networks with Samba
    Features and Benefits
    Background Information
    Name Resolution in a pure UNIX/Linux world
    /etc/hosts
    /etc/resolv.conf
    /etc/host.conf
    /etc/nsswitch.conf
    Name resolution as used within MS Windows networking
    The NetBIOS Name Cache
    The LMHOSTS file
    HOSTS file
    DNS Lookup
    WINS Lookup
    Common Errors
    Pinging works only in one way
    Very Slow Network Connections
    Samba server name change problem
    27. Unicode/Charsets
    Features and Benefits
    What are charsets and unicode?
    Samba and charsets
    Conversion from old names
    Japanese charsets
    Common errors
    CP850.so can't be found
    28. Samba Backup Techniques
    Note
    Features and Benefits
    29. High Availability Options
    Note

    Chapter 10. Samba / MS Windows Network Browsing Guide

    John H. Terpstra

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    July 5, 1998

    Updated: April 21, 2003

    +

    Table of Contents

    10. Network Browsing
    Features and Benefits
    What Is Browsing?
    Discussion
    NetBIOS over TCP/IP
    TCP/IP without NetBIOS
    DNS and Active Directory
    How Browsing Functions
    Configuring WORKGROUP Browsing
    DOMAIN Browsing Configuration
    Forcing Samba to Be the Master
    Making Samba the Domain Master
    Note about Broadcast Addresses
    Multiple Interfaces
    Use of the Remote Announce Parameter
    Use of the Remote Browse Sync Parameter
    WINS The Windows Internetworking Name Server
    WINS Server Configuration
    WINS Replication
    Static WINS Entries
    Helpful Hints
    Windows Networking Protocols
    Name Resolution Order
    Technical Overview of Browsing
    Browsing Support in Samba
    Problem Resolution
    Cross-Subnet Browsing
    Common Errors
    How Can One Flush the Samba NetBIOS Name Cache without Restarting Samba?
    Server Resources Can Not Be Listed
    I get an `Unable to browse the network' error
    Browsing of Shares and Directories is Very Slow
    11. Account Information Databases
    Features and Benefits
    Backward Compatibility Backends
    New Backends
    Technical Information
    Important Notes About Security
    Mapping User Identifiers between MS Windows and UNIX
    Mapping Common UIDs/GIDs on Distributed Machines
    Account Management Tools
    The smbpasswd Command
    The pdbedit Command
    Password Backends
    Plaintext
    smbpasswd Encrypted Password Database
    tdbsam
    ldapsam
    MySQL
    XML
    Common Errors
    Users Cannot Logon
    Users Being Added to the Wrong Backend Database
    Configuration of auth methods
    12. Group Mapping MS Windows and UNIX
    Features and Benefits
    Discussion
    Default Users, Groups and Relative Identifiers
    Example Configuration
    Configuration Scripts
    Sample smb.conf Add Group Script
    Script to Configure Group Mapping
    Common Errors
    Adding Groups Fails
    Adding MS Windows Groups to MS Windows Groups Fails
    Adding Domain Users to the Power Users Group
    13. File, Directory and Share Access Controls
    Features and Benefits
    File System Access Controls
    MS Windows NTFS Comparison with UNIX File Systems
    Managing Directories
    File and Directory Access Control
    Share Definition Access Controls
    User and Group-Based Controls
    File and Directory Permissions-Based Controls
    Miscellaneous Controls
    Access Controls on Shares
    Share Permissions Management
    MS Windows Access Control Lists and UNIX Interoperability
    Managing UNIX Permissions Using NT Security Dialogs
    Viewing File Security on a Samba Share
    Viewing File Ownership
    Viewing File or Directory Permissions
    Modifying File or Directory Permissions
    Interaction with the Standard Samba create mask Parameters
    Interaction with the Standard Samba File Attribute Mapping
    Common Errors
    Users Cannot Write to a Public Share
    File Operations Done as root with force user Set
    MS Word with Samba Changes Owner of File
    14. File and Record Locking
    Features and Benefits
    Discussion
    Opportunistic Locking Overview
    Samba Opportunistic Locking Control
    Example Configuration
    MS Windows Opportunistic Locking and Caching Controls
    Workstation Service Entries
    Server Service Entries
    Persistent Data Corruption
    Common Errors
    locking.tdb Error Messages
    Problems Saving Files in MS Office on Windows XP
    Long Delays Deleting Files Over Network with XP SP1
    Additional Reading
    15. Securing Samba
    Introduction
    Features and Benefits
    Technical Discussion of Protective Measures and Issues
    Using Host-Based Protection
    User-Based Protection
    Using Interface Protection
    Using a Firewall
    Using IPC$ Share-Based Denials
    NTLMv2 Security
    Upgrading Samba
    Common Errors
    Smbclient Works on Localhost, but the Network Is Dead
    Why Can Users Access Home Directories of Other Users?
    16. Interdomain Trust Relationships
    Features and Benefits
    Trust Relationship Background
    Native MS Windows NT4 Trusts Configuration
    Creating an NT4 Domain Trust
    Completing an NT4 Domain Trust
    Inter-Domain Trust Facilities
    Configuring Samba NT-Style Domain Trusts
    Samba as the Trusted Domain
    Samba as the Trusting Domain
    NT4-Style Domain Trusts with Windows 2000
    Common Errors
    17. Hosting a Microsoft Distributed File System tree on Samba
    Features and Benefits
    Common Errors
    MSDFS UNIX Path Is Case-Critical
    18. Classical Printing Support
    Features and Benefits
    Technical Introduction
    Client to Samba Print Job Processing
    Printing Related Configuration Parameters
    Simple Print Configuration
    Verifing Configuration with testparm
    Rapid Configuration Validation
    Extended Printing Configuration
    Detailed Explanation Settings
    Printing Developments Since Samba-2.2
    Point'n'Print Client Drivers on Samba Servers
    The Obsoleted [printer$] Section
    Creating the [print$] Share
    [print$] Section Parameters
    The [print$] Share Directory
    Installing Drivers into [print$]
    Add Printer Wizard Driver Installation
    Installing Print Drivers Using rpcclient
    Client Driver Installation Procedure
    First Client Driver Installation
    Setting Device Modes on New Printers
    Additional Client Driver Installation
    Always Make First Client Connection as root or printer admin
    Other Gotchas
    Setting Default Print Options for Client Drivers
    Supporting Large Numbers of Printers
    Adding New Printers with the Windows NT APW
    Error Message: Cannot connect under a different Name
    Take Care When Assembling Driver Files
    Samba and Printer Ports
    Avoiding Common Client Driver Misconfiguration
    The Imprints Toolset
    What is Imprints?
    Creating Printer Driver Packages
    The Imprints Server
    The Installation Client
    Adding Network Printers without User Interaction
    The addprinter Command
    Migration of Classical Printing to Samba
    Publishing Printer Information in Active Directory or LDAP
    Common Errors
    I Give My Root Password but I Do Not Get Access
    My Print Jobs Get Spooled into the Spooling Directory, but Then Get Lost
    19. CUPS Printing Support
    Introduction
    Features and Benefits
    Overview
    Basic CUPS Support Configuration
    Linking smbd with libcups.so
    Simple smb.conf Settings for CUPS
    More Complex CUPS smb.conf Settings
    Advanced Configuration
    Central Spooling vs. Peer-to-Peer Printing
    Raw Print Serving Vendor Drivers on Windows Clients
    Installation of Windows Client Drivers
    Explicitly Enable raw Printing for application/octet-stream
    Driver Upload Methods
    Advanced Intelligent Printing with PostScript Driver Download
    GDI on Windows -- PostScript on UNIX
    Windows Drivers, GDI and EMF
    UNIX Printfile Conversion and GUI Basics
    PostScript and Ghostscript
    Ghostscript the Software RIP for Non-PostScript Printers
    PostScript Printer Description (PPD) Specification
    Using Windows-Formatted Vendor PPDs
    CUPS Also Uses PPDs for Non-PostScript Printers
    The CUPS Filtering Architecture
    MIME Types and CUPS Filters
    MIME Type Conversion Rules
    Filtering Overview
    Prefilters
    pstops
    pstoraster
    imagetops and imagetoraster
    rasterto [printers specific]
    CUPS Backends
    The Role of cupsomatic/foomatic
    The Complete Picture
    mime.convs
    Raw Printing
    application/octet-stream Printing
    PostScript Printer Descriptions (PPDs) for Non-PS Printers
    cupsomatic/foomatic-rip Versus native CUPS Printing
    Examples for Filtering Chains
    Sources of CUPS Drivers/PPDs
    Printing with Interface Scripts
    Network Printing (Purely Windows)
    From Windows Clients to an NT Print Server
    Driver Execution on the Client
    Driver Execution on the Server
    Network Printing (Windows Clients UNIX/Samba Print +Servers)
    From Windows Clients to a CUPS/Samba Print Server
    Samba Receiving Jobfiles and Passing Them to CUPS
    Network PostScript RIP
    PPDs for Non-PS Printers on UNIX
    PPDs for Non-PS Printers on Windows
    Windows Terminal Servers (WTS) as CUPS Clients
    Printer Drivers Running in Kernel Mode Cause Many +Problems
    Workarounds Impose Heavy Limitations
    CUPS: A Magical Stone?
    PostScript Drivers with No Major Problems Even in Kernel +Mode
    Configuring CUPS for Driver Download
    cupsaddsmb: The Unknown Utility
    Prepare Your smb.conf for cupsaddsmb
    CUPS PostScript Driver for Windows NT/200x/XP
    Recognizing Different Driver Files
    Acquiring the Adobe Driver Files
    ESP Print Pro PostScript Driver for Windows NT/200x/XP
    Caveats to be Considered
    Windows CUPS PostScript Driver Versus Adobe Driver
    Run cupsaddsmb (Quiet Mode)
    Run cupsaddsmb with Verbose Output
    Understanding cupsaddsmb
    How to Recognize If cupsaddsmb Completed Successfully
    cupsaddsmb with a Samba PDC
    cupsaddsmb Flowchart
    Installing the PostScript Driver on a Client
    Avoiding Critical PostScript Driver Settings on the Client
    Installing PostScript Driver Files Manually Using rpcclient
    A Check of the rpcclient man Page
    Understanding the rpcclient man Page
    Producing an Example by Querying a Windows Box
    Requirements for adddriver and setdriver to Succeed
    Manual Driver Installation in 15 Steps
    Troubleshooting Revisited
    The Printing *.tdb Files
    Trivial Database Files
    Binary Format
    Losing *.tdb Files
    Using tdbbackup
    CUPS Print Drivers from Linuxprinting.org
    foomatic-rip and Foomatic Explained
    foomatic-rip and Foomatic-PPD Download and Installation
    Page Accounting with CUPS
    Setting Up Quotas
    Correct and Incorrect Accounting
    Adobe and CUPS PostScript Drivers for Windows Clients
    The page_log File Syntax
    Possible Shortcomings
    Future Developments
    Additional Material
    Auto-Deletion or Preservation of CUPS Spool Files
    CUPS Configuration Settings Explained
    Pre-Conditions
    Manual Configuration
    Printing from CUPS to Windows Attached Printers
    More CUPS-Filtering Chains
    Common Errors
    Windows 9x/ME Client Can't Install Driver
    cupsaddsmb Keeps Asking for Root Password in Never-ending Loop
    cupsaddsmb Errors
    Client Can't Connect to Samba Printer
    New Account Reconnection from Windows 200x/XP Troubles
    Avoid Being Connected to the Samba Server as the Wrong User
    Upgrading to CUPS Drivers from Adobe Drivers
    Can't Use cupsaddsmb on Samba Server Which Is a PDC
    Deleted Windows 200x Printer Driver Is Still Shown
    Windows 200x/XP "Local Security Policies"
    Administrator Cannot Install Printers for All Local Users
    Print Change Notify Functions on NT-clients
    WinXP-SP1
    Print Options for All Users Can't Be Set on Windows 200x/XP
    Most Common Blunders in Driver Settings on Windows Clients
    cupsaddsmb Does Not Work with Newly Installed Printer
    Permissions on /var/spool/samba/ Get Reset After Each Reboot
    Print Queue Called lp Mis-handles Print Jobs
    Location of Adobe PostScript Driver Files for cupsaddsmb
    Overview of the CUPS Printing Processes
    20. Stackable VFS modules
    Features and Benefits
    Discussion
    Included Modules
    audit
    extd_audit
    fake_perms
    recycle
    netatalk
    VFS Modules Available Elsewhere
    DatabaseFS
    vscan
    21. Winbind: Use of Domain Accounts
    Features and Benefits
    Introduction
    What Winbind Provides
    Target Uses
    How Winbind Works
    Microsoft Remote Procedure Calls
    Microsoft Active Directory Services
    Name Service Switch
    Pluggable Authentication Modules
    User and Group ID Allocation
    Result Caching
    Installation and Configuration
    Introduction
    Requirements
    Testing Things Out
    Conclusion
    Common Errors
    NSCD Problem Warning
    Winbind Is Not Resolving Users and Groups
    22. Advanced Network Management
    Features and Benefits
    Remote Server Administration
    Remote Desktop Management
    Remote Management from NoMachine.Com
    Network Logon Script Magic
    Adding Printers without User Intervention
    23. System and Account Policies
    Features and Benefits
    Creating and Managing System Policies
    Windows 9x/ME Policies
    Windows NT4-Style Policy Files
    MS Windows 200x/XP Professional Policies
    Managing Account/User Policies
    Management Tools
    Samba Editreg Toolset
    Windows NT4/200x
    Samba PDC
    System Startup and Logon Processing Overview
    Common Errors
    Policy Does Not Work
    24. Desktop Profile Management
    Features and Benefits
    Roaming Profiles
    Samba Configuration for Profile Handling
    Windows Client Profile Configuration Information
    Sharing Profiles between W9x/Me and NT4/200x/XP Workstations
    Profile Migration from Windows NT4/200x Server to Samba
    Mandatory Profiles
    Creating and Managing Group Profiles
    Default Profile for Windows Users
    MS Windows 9x/Me
    MS Windows NT4 Workstation
    MS Windows 200x/XP
    Common Errors
    Configuring Roaming Profiles for a Few Users or Groups
    Cannot Use Roaming Profiles
    Changing the Default Profile
    25. PAM-Based Distributed Authentication
    Features and Benefits
    Technical Discussion
    PAM Configuration Syntax
    Example System Configurations
    smb.conf PAM Configuration
    Remote CIFS Authentication Using winbindd.so
    Password Synchronization Using pam_smbpass.so
    Common Errors
    pam_winbind Problem
    Winbind Is Not Resolving Users and Groups
    26. Integrating MS Windows Networks with Samba
    Features and Benefits
    Background Information
    Name Resolution in a Pure UNIX/Linux World
    /etc/hosts
    /etc/resolv.conf
    /etc/host.conf
    /etc/nsswitch.conf
    Name Resolution as Used within MS Windows Networking
    The NetBIOS Name Cache
    The LMHOSTS File
    HOSTS File
    DNS Lookup
    WINS Lookup
    Common Errors
    Pinging Works Only in One Way
    Very Slow Network Connections
    Samba Server Name Change Problem
    27. Unicode/Charsets
    Features and Benefits
    What Are Charsets and Unicode?
    Samba and Charsets
    Conversion from Old Names
    Japanese Charsets
    Common Errors
    CP850.so Can't Be Found
    28. Samba Backup Techniques
    Note
    Features and Benefits
    29. High Availability Options
    Note

    Chapter 10. Network Browsing

    John H. Terpstra

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    July 5, 1998

    Updated: April 21, 2003

    This document contains detailed information as well as a fast track guide to -implementing browsing across subnets and / or across workgroups (or domains). +implementing browsing across subnets and/or across workgroups (or domains). WINS is the best tool for resolution of NetBIOS names to IP addresses. WINS is -NOT involved in browse list handling except by way of name to address resolution. +not involved in browse list handling except by way of name to address resolution.

    Note

    -MS Windows 2000 and later can be configured to operate with NO NetBIOS -over TCP/IP. Samba-3 and later also supports this mode of operation. -When the use of NetBIOS over TCP/IP has been disabled then the primary +MS Windows 2000 and later versions can be configured to operate with no NetBIOS +over TCP/IP. Samba-3 and later versions also support this mode of operation. +When the use of NetBIOS over TCP/IP has been disabled, the primary means for resolution of MS Windows machine names is via DNS and Active Directory. The following information assumes that your site is running NetBIOS over TCP/IP. -

    Features and Benefits

    -Someone once referred to the past in terms of: They were the worst of times, -they were the best of times. The more we look back, them more we long for what was and -hope it never returns!. -

    +

    Features and Benefits

    +Someone once referred to the past in these words “It was the best of times, +it was the worst of times.” The more we look back, the more we long for what was and +hope it never returns. +

    + For many MS Windows network administrators, that statement sums up their feelings about NetBIOS networking precisely. For those who mastered NetBIOS networking, its fickle nature was just par for the course. For those who never quite managed to tame its lusty features, NetBIOS is like Paterson's Curse.

    -For those not familiar with botanical problems in Australia: Paterson's curse, -Echium plantagineum, was introduced to Australia from Europe during the mid-nineteenth +For those not familiar with botanical problems in Australia, Paterson's Curse, +Echium plantagineum, was introduced to Australia from Europe during the mid-nineteenth century. Since then it has spread rapidly. The high seed production, with densities of -thousands of seeds per square metre, a seed longevity of more than seven years, and an +thousands of seeds per square meter, a seed longevity of more than seven years, and an ability to germinate at any time of year, given the right conditions, are some of the features which make it such a persistent weed.

    -In this chapter we explore vital aspects of SMB (Server Message Block) networking with +In this chapter we explore vital aspects of Server Message Block (SMB) networking with a particular focus on SMB as implemented through running NetBIOS (Network Basic -Input / Output System) over TCP/IP. Since Samba does NOT implement SMB or NetBIOS over -any other protocols we need to know how to configure our network environment and simply +Input/Output System) over TCP/IP. Since Samba does not implement SMB or NetBIOS over +any other protocols, we need to know how to configure our network environment and simply remember to use nothing but TCP/IP on all our MS Windows network clients.

    Samba provides the ability to implement a WINS (Windows Internetworking Name Server) and implements extensions to Microsoft's implementation of WINS. These extensions -help Samba to affect stable WINS operations beyond the normal scope of MS WINS. +help Samba to effect stable WINS operations beyond the normal scope of MS WINS.

    -Please note that WINS is exclusively a service that applies only to those systems -that run NetBIOS over TCP/IP. MS Windows 200x / XP have the capacity to turn off -support for NetBIOS, in which case WINS is of no relevance. Samba supports this also. +WINS is exclusively a service that applies only to those systems +that run NetBIOS over TCP/IP. MS Windows 200x/XP have the capacity to operate with +support for NetBIOS disabled, in which case WINS is of no relevance. Samba supports this also.

    -For those networks on which NetBIOS has been disabled (ie: WINS is NOT required) +For those networks on which NetBIOS has been disabled (i.e., WINS is not required) the use of DNS is necessary for host name resolution. -

    What is Browsing?

    -To most people browsing means that they can see the MS Windows and Samba servers +

    What Is Browsing?

    +To most people browsing means they can see the MS Windows and Samba servers in the Network Neighborhood, and when the computer icon for a particular server is clicked, it opens up and shows the shares and printers available on the target server.

    -What seems so simple is in fact a very complex interaction of different technologies. -The technologies (or methods) employed in making all of this work includes: -

    • MS Windows machines register their presence to the network

    • Machines announce themselves to other machines on the network

    • One or more machine on the network collates the local announcements

    • The client machine finds the machine that has the collated list of machines

    • The client machine is able to resolve the machine names to IP addresses

    • The client machine is able to connect to a target machine

    +What seems so simple is in fact a complex interaction of different technologies. +The technologies (or methods) employed in making all of this work include: +

    • MS Windows machines register their presence to the network.
    • Machines announce themselves to other machines on the network.
    • One or more machine on the network collates the local announcements.
    • The client machine finds the machine that has the collated list of machines.
    • The client machine is able to resolve the machine names to IP addresses.
    • The client machine is able to connect to a target machine.

    The Samba application that controls browse list management and name resolution is called nmbd. The configuration parameters involved in nmbd's operation are: -

    Browsing options: os level(*), - lm announce, - lm interval, - preferred master(*), - local master(*), - domain master(*), - browse list, - enhanced browsing. +

    Browsing options: os level(*), + lm announce, + lm interval, + preferred master(*), + local master(*), + domain master(*), + browse list, + enhanced browsing.

    Name Resolution Method: - name resolve order(*). + name resolve order(*).

    WINS options: - dns proxy, - wins proxy, - wins server(*), - wins support(*), - wins hook. -

    + dns proxy, + wins proxy, + wins server(*), + wins support(*), + wins hook. +

    + For Samba, the WINS Server and WINS Support are mutually exclusive options. Those marked with -an '*' are the only options that commonly MAY need to be modified. Even if not one of these -parameters is set nmbd will still do it's job. -

    Discussion

    -Firstly, all MS Windows networking uses SMB (Server Message Block) based messaging. -SMB messaging may be implemented with or without NetBIOS. MS Windows 200x supports -NetBIOS over TCP/IP for backwards compatibility. Microsoft is intent on phasing out NetBIOS -support. -

    NetBIOS over TCP/IP

    -Samba implements NetBIOS, as does MS Windows NT / 200x / XP, by encapsulating it over TCP/IP. -MS Windows products can do likewise. NetBIOS based networking uses broadcast messaging to -affect browse list management. When running NetBIOS over TCP/IP, this uses UDP based messaging. +an (*) are the only options that commonly may need to be modified. Even if none of these +parameters is set, nmbd will still do its job. +

    Discussion

    +All MS Windows networking uses SMB-based messaging. SMB messaging may be implemented with or without NetBIOS. +MS Windows 200x supports NetBIOS over TCP/IP for backwards compatibility. Microsoft appears intent on phasing +out NetBIOS support. +

    NetBIOS over TCP/IP

    +Samba implements NetBIOS, as does MS Windows NT/200x/XP, by encapsulating it over TCP/IP. +MS Windows products can do likewise. NetBIOS-based networking uses broadcast messaging to +effect browse list management. When running NetBIOS over TCP/IP, this uses UDP-based messaging. UDP messages can be broadcast or unicast. -

    +

    + Normally, only unicast UDP messaging can be forwarded by routers. The -remote announce parameter to smb.conf helps to project browse announcements +remote announce parameter to smb.conf helps to project browse announcements to remote network segments via unicast UDP. Similarly, the -remote browse sync parameter of smb.conf +remote browse sync parameter of smb.conf implements browse list collation using unicast UDP.

    Secondly, in those networks where Samba is the only SMB server technology, -wherever possible nmbd should be configured on one (1) machine as the WINS +wherever possible nmbd should be configured on one machine as the WINS server. This makes it easy to manage the browsing environment. If each network -segment is configured with it's own Samba WINS server, then the only way to -get cross segment browsing to work is by using the -remote announce and the remote browse sync +segment is configured with its own Samba WINS server, then the only way to +get cross-segment browsing to work is by using the + + +remote announce and the remote browse sync parameters to your smb.conf file.

    - -If only one WINS server is used for an entire multi-segment network then -the use of the remote announce and the -remote browse sync parameters should NOT be necessary. + +If only one WINS server is used for an entire multi-segment network, then +the use of the remote announce and the +remote browse sync parameters should not be necessary.

    -As of Samba 3 WINS replication is being worked on. The bulk of the code has -been committed, but it still needs maturation. This is NOT a supported feature + +As of Samba-3 WINS replication is being worked on. The bulk of the code has +been committed, but it still needs maturation. This is not a supported feature of the Samba-3.0.0 release. Hopefully, this will become a supported feature of one of the Samba-3 release series.

    Right now Samba WINS does not support MS-WINS replication. This means that -when setting up Samba as a WINS server there must only be one nmbd +when setting up Samba as a WINS server, there must only be one nmbd configured as a WINS server on the network. Some sites have used multiple Samba WINS servers for redundancy (one server per subnet) and then used -remote browse sync and remote announce -to affect browse list collation across all segments. Note that this means clients +remote browse sync and remote announce +to effect browse list collation across all segments. Note that this means clients will only resolve local names, and must be configured to use DNS to resolve names on other subnets in order to resolve the IP addresses of the servers they can see on other subnets. This setup is not recommended, but is mentioned as a practical -consideration (ie: an 'if all else fails' scenario). +consideration (i.e., an “if all else fails” scenario).

    Lastly, take note that browse lists are a collection of unreliable broadcast messages that are repeated at intervals of not more than 15 minutes. This means that it will take time to establish a browse list and it can take up to 45 -minutes to stabilise, particularly across network segments. -

    TCP/IP - without NetBIOS

    - - - -All TCP/IP using systems use various forms of host name resolution. The primary -methods for TCP/IP hostname resolutions involves either a static file (/etc/hosts -) or DNS (the Domain Name System). DNS is the technology that makes -the Internet usable. DNS based host name resolution is supported by nearly all TCP/IP -enabled systems. Only a few embedded TCP/IP systems do not support DNS. -

    -When an MS Windows 200x / XP system attempts to resolve a host name to an IP address +minutes to stabilize, particularly across network segments. +

    TCP/IP without NetBIOS

    + + + +All TCP/IP-enabled systems use various forms of host name resolution. The primary +methods for TCP/IP hostname resolution involve either a static file (/etc/hosts) +or the Domain Name System (DNS). DNS is the technology that makes +the Internet usable. DNS-based host name resolution is supported by nearly all +TCP/IP-enabled systems. Only a few embedded TCP/IP systems do not support DNS. +

    +When an MS Windows 200x/XP system attempts to resolve a host name to an IP address it follows a defined path:

    1. Checks the hosts file. It is located in - C:\WinNT\System32\Drivers\etc. + C:\Windows NT\System32\Drivers\etc.

    2. - Does a DNS lookup + Does a DNS lookup.

    3. - Checks the NetBIOS name cache + Checks the NetBIOS name cache.

    4. - Queries the WINS server + Queries the WINS server.

    5. - Does a broadcast name lookup over UDP + Does a broadcast name lookup over UDP.

    6. - Looks up entries in LMHOSTS. It is located in - C:\WinNT\System32\Drivers\etc. -

    -Windows 200x / XP can register it's host name with a Dynamic DNS server. You can -force register with a Dynamic DNS server in Windows 200x / XP using: -ipconfig /registerdns + Looks up entries in LMHOSTS. It is located in + C:\Windows NT\System32\Drivers\etc. +

    + +Windows 200x/XP can register its host name with a Dynamic DNS server. You can +force register with a Dynamic DNS server in Windows 200x/XP using: +ipconfig /registerdns.

    With Active Directory (ADS), a correctly functioning DNS server is absolutely essential. In the absence of a working DNS server that has been correctly configured, -MS Windows clients and servers will be totally unable to locate each other, +MS Windows clients and servers will be unable to locate each other, so consequently network services will be severely impaired.

    The use of Dynamic DNS is highly recommended with Active Directory, in which case -the use of BIND9 is preferred for it's ability to adequately support the SRV (service) +the use of BIND9 is preferred for its ability to adequately support the SRV (service) records that are needed for Active Directory. -

    DNS and Active Directory

    -Occasionally we hear from UNIX network administrators who want to use a UNIX based Dynamic +

    DNS and Active Directory

    + +Occasionally we hear from UNIX network administrators who want to use a UNIX-based Dynamic DNS server in place of the Microsoft DNS server. While this might be desirable to some, the MS Windows 200x DNS server is auto-configured to work with Active Directory. It is possible to use BIND version 8 or 9, but it will almost certainly be necessary to create service records -so that MS Active Directory clients can resolve host names to locate essential network services. +so MS Active Directory clients can resolve host names to locate essential network services. The following are some of the default service records that Active Directory requires: -

    • _ldap._tcp.pdc.ms-dcs.Domain

      - This provides the address of the Windows NT PDC for the Domain. -

    • _ldap._tcp.pdc.ms-dcs.DomainTree

      - Resolves the addresses of Global Catalog servers in the domain. -

    • _ldap._tcp.site.sites.writable.ms-dcs.Domain

      - Provides list of domain controllers based on sites. -

    • _ldap._tcp.writable.ms-dcs.Domain

      - Enumerates list of domain controllers that have the writable - copies of the Active Directory data store. -

    • _ldap._tcp.GUID.domains.ms-dcs.DomainTree

      - Entry used by MS Windows clients to locate machines using the - Global Unique Identifier. -

    • _ldap._tcp.Site.gc.ms-dcs.DomainTree

      - Used by MS Windows clients to locate site configuration dependent - Global Catalog server. -

    How Browsing Functions

    +

    _ldap._tcp.pdc.ms-dcs.Domain

    + This provides the address of the Windows NT PDC for the Domain. +

    _ldap._tcp.pdc.ms-dcs.DomainTree

    + Resolves the addresses of Global Catalog servers in the domain. +

    _ldap._tcp.site.sites.writable.ms-dcs.Domain

    + Provides list of Domain Controllers based on sites. +

    _ldap._tcp.writable.ms-dcs.Domain

    + Enumerates list of Domain Controllers that have the writable copies of the Active Directory datastore. +

    _ldap._tcp.GUID.domains.ms-dcs.DomainTree

    + Entry used by MS Windows clients to locate machines using the Global Unique Identifier. +

    _ldap._tcp.Site.gc.ms-dcs.DomainTree

    + Used by MS Windows clients to locate site configuration dependent Global Catalog server. +

    How Browsing Functions

    MS Windows machines register their NetBIOS names -(ie: the machine name for each service type in operation) on start -up. The exact method by which this name registration +(i.e., the machine name for each service type in operation) on start-up. +The exact method by which this name registration takes place is determined by whether or not the MS Windows client/server has been given a WINS server address, whether or not LMHOSTS lookup is enabled, or if DNS for NetBIOS name resolution is enabled, etc. @@ -2336,27 +2499,27 @@ is enabled, or if DNS for NetBIOS name resolution is enabled, etc. In the case where there is no WINS server, all name registrations as well as name lookups are done by UDP broadcast. This isolates name resolution to the local subnet, unless LMHOSTS is used to list all -names and IP addresses. In such situations Samba provides a means by +names and IP addresses. In such situations, Samba provides a means by which the Samba server name may be forcibly injected into the browse list of a remote MS Windows network (using the -remote announce parameter). +remote announce parameter).

    Where a WINS server is used, the MS Windows client will use UDP unicast to register with the WINS server. Such packets can be routed and thus WINS allows name resolution to function across routed networks.

    During the startup process an election will take place to create a -local master browser if one does not already exist. On each NetBIOS network -one machine will be elected to function as the domain master browser. This -domain browsing has nothing to do with MS security domain control. -Instead, the domain master browser serves the role of contacting each local +Local Master Browser if one does not already exist. On each NetBIOS network +one machine will be elected to function as the Domain Master Browser. This +domain browsing has nothing to do with MS security Domain Control. +Instead, the Domain Master Browser serves the role of contacting each local master browser (found by asking WINS or from LMHOSTS) and exchanging browse list contents. This way every master browser will eventually obtain a complete -list of all machines that are on the network. Every 11-15 minutes an election +list of all machines that are on the network. Every 11 to 15 minutes an election is held to determine which machine will be the master browser. By the nature of the election criteria used, the machine with the highest uptime, or the -most senior protocol version, or other criteria, will win the election -as domain master browser. +most senior protocol version or other criteria, will win the election +as Domain Master Browser.

    Clients wishing to browse the network make use of this list, but also depend on the availability of correct name resolution to the respective IP @@ -2366,358 +2529,318 @@ Any configuration that breaks name resolution and/or browsing intrinsics will annoy users because they will have to put up with protracted inability to use the network services.

    -Samba supports a feature that allows forced synchronisation -of browse lists across routed networks using the remote browse sync parameter in the smb.conf file. -This causes Samba to contact the local master browser on a remote network and -to request browse list synchronisation. This effectively bridges -two networks that are separated by routers. The two remote -networks may use either broadcast based name resolution or WINS -based name resolution, but it should be noted that the remote browse sync parameter provides browse list synchronisation - and -that is distinct from name to address resolution, in other -words, for cross subnet browsing to function correctly it is -essential that a name to address resolution mechanism be provided. -This mechanism could be via DNS, /etc/hosts, -and so on. -

    Setting up WORKGROUP Browsing

    -To set up cross subnet browsing on a network containing machines -in up to be in a WORKGROUP, not an NT Domain you need to set up one -Samba server to be the Domain Master Browser (note that this is *NOT* +Samba supports a feature that allows forced synchronization of browse lists across +routed networks using the remote browse sync +parameter in the smb.conf file. This causes Samba to contact the local master +browser on a remote network and to request browse list synchronization. This +effectively bridges two networks that are separated by routers. The two remote +networks may use either broadcast-based name resolution or WINS-based name +resolution, but it should be noted that the +remote browse sync parameter provides +browse list synchronization and that is distinct from name to address +resolution. In other words, for cross-subnet browsing to function correctly it is +essential that a name-to-address resolution mechanism be provided. This mechanism +could be via DNS, /etc/hosts, and so on. +

    Configuring WORKGROUP Browsing

    +To configure cross-subnet browsing on a network containing machines +in a WORKGROUP, not an NT Domain, you need to set up one +Samba server to be the Domain Master Browser (note that this is not the same as a Primary Domain Controller, although in an NT Domain the -same machine plays both roles). The role of a Domain master browser is -to collate the browse lists from local master browsers on all the -subnets that have a machine participating in the workgroup. Without -one machine configured as a domain master browser each subnet would -be an isolated workgroup, unable to see any machines on any other -subnet. It is the presence of a domain master browser that makes -cross subnet browsing possible for a workgroup. -

    -In an WORKGROUP environment the domain master browser must be a -Samba server, and there must only be one domain master browser per -workgroup name. To set up a Samba server as a domain master browser, +same machine plays both roles). The role of a Domain Master Browser is +to collate the browse lists from Local Master Browsers on all the +subnets that have a machine participating in the workgroup. Without +one machine configured as a Domain Master Browser, each subnet would +be an isolated workgroup unable to see any machines on another +subnet. It is the presence of a Domain Master Browser that makes +cross-subnet browsing possible for a workgroup. +

    +In a WORKGROUP environment the Domain Master Browser must be a +Samba server, and there must only be one Domain Master Browser per +workgroup name. To set up a Samba server as a Domain Master Browser, set the following option in the [global] section -of the smb.conf file : +of the smb.conf file:

    domain master = yes

    -The domain master browser should also preferably be the local master -browser for its own subnet. In order to achieve this set the following -options in the [global] section of the smb.conf file : -

    -

    Example 10.1. Domain master browser smb.conf

    [global]
    domain master = yes
    local master = yes
    preferred master = yes
    os level = 65

    -

    -The domain master browser may be the same machine as the WINS -server, if you require. -

    -Next, you should ensure that each of the subnets contains a -machine that can act as a local master browser for the -workgroup. Any MS Windows NT/2K/XP/2003 machine should be -able to do this, as will Windows 9x machines (although these -tend to get rebooted more often, so it's not such a good idea -to use these). To make a Samba server a local master browser -set the following options in the [global] section of the -smb.conf file : -

    -

    Example 10.2. Local master browser smb.conf

    [global]
    domain master = no
    local master = yes
    preferred master = yes
    os level = 65

    -

    -Do not do this for more than one Samba server on each subnet, -or they will war with each other over which is to be the local -master browser. -

    -The local master parameter allows Samba to act as a -local master browser. The preferred master causes nmbd -to force a browser election on startup and the os level -parameter sets Samba high enough so that it should win any browser elections. -

    -If you have an NT machine on the subnet that you wish to -be the local master browser then you can disable Samba from -becoming a local master browser by setting the following -options in the [global] section of the -smb.conf file : -

    -

    Example 10.3. smb.conf for not being a master browser

    [global]
    domain master = no
    local master = no
    preferred master = no
    os level = 0

    -

    Setting up DOMAIN Browsing

    -If you are adding Samba servers to a Windows NT Domain then -you must not set up a Samba server as a domain master browser. -By default, a Windows NT Primary Domain Controller for a domain -is also the Domain master browser for that domain, and many -things will break if a Samba server registers the Domain master -browser NetBIOS name (DOMAIN<1B>) +The Domain Master Browser should preferably be the local master +browser for its own subnet. In order to achieve this, set the following +options in the [global] section of the smb.conf +file as shown in . +

    +

    Example 10.1. Domain Master Browser smb.conf

    [global]
    domain master = yes
    local master = yes
    preferred master = yes
    os level = 65

    +

    +The Domain Master Browser may be the same machine as the WINS server, if necessary. +

    +Next, you should ensure that each of the subnets contains a machine that can act as +a Local Master Browser for the workgroup. Any MS Windows NT/200x/XP machine should +be able to do this, as will Windows 9x/Me machines (although these tend to get +rebooted more often, so it is not such a good idea to use these). To make a Samba +server a Local Master Browser set the following options in the +[global] section of the smb.conf file as +shown in : +

    +

    Example 10.2. Local master browser smb.conf

    [global]
    domain master = no
    local master = yes
    preferred master = yes
    os level = 65

    +

    +Do not do this for more than one Samba server on each subnet, or they will war with +each other over which is to be the Local Master Browser. +

    +The local master parameter allows Samba to act as a +Local Master Browser. The preferred master causes nmbd +to force a browser election on startup and the os level +parameter sets Samba high enough so it should win any browser elections. +

    +If you have an NT machine on the subnet that you wish to be the Local Master Browser, you can disable Samba from +becoming a Local Master Browser by setting the following options in the [global] section of the +smb.conf file as shown in : +

    +

    Example 10.3. smb.conf for not being a Master Browser

    [global]
    domain master = no
    local master = no
    preferred master = no
    os level = 0

    +

    DOMAIN Browsing Configuration

    +If you are adding Samba servers to a Windows NT Domain, then you must not set up a Samba server as a Domain Master Browser. +By default, a Windows NT Primary Domain Controller for a domain is also the Domain Master Browser for that domain. Network +browsing may break if a Samba server registers the domain master browser NetBIOS name (DOMAIN<1B>) with WINS instead of the PDC.

    -For subnets other than the one containing the Windows NT PDC -you may set up Samba servers as local master browsers as -described. To make a Samba server a local master browser set -the following options in the [global] section -of the smb.conf file : -

    -

    Example 10.4. Local master browser smb.conf

    [global]
    domain master = no
    local master = yes
    preferred master = yes
    os level = 65

    -

    -If you wish to have a Samba server fight the election with machines -on the same subnet you may set the os level parameter -to lower levels. By doing this you can tune the order of machines that -will become local master browsers if they are running. For -more details on this see the section -Forcing Samba to be the master browser -below. -

    -If you have Windows NT machines that are members of the domain -on all subnets, and you are sure they will always be running then -you can disable Samba from taking part in browser elections and -ever becoming a local master browser by setting following options -in the [global] section of the smb.conf -file : -

    -

    Example 10.5. smb.conf for not being a master browser

    [global]
    domain master = no
    local master = no
    preferred master = no
    os level = 0

    -

    Forcing Samba to be the master

    -Who becomes the master browser is determined by an election -process using broadcasts. Each election packet contains a number of parameters -which determine what precedence (bias) a host should have in the -election. By default Samba uses a very low precedence and thus loses -elections to just about anyone else. -

    -If you want Samba to win elections then just set the os level global -option in smb.conf to a higher number. It defaults to 0. Using 34 -would make it win all elections over every other system (except other -samba systems!) -

    -A os level of 2 would make it beat WfWg and Win95, but not MS Windows -NT/2K Server. A MS Windows NT/2K Server domain controller uses level 32. -

    The maximum os level is 255

    -If you want Samba to force an election on startup, then set the -preferred master global option in smb.conf to yes. Samba will -then have a slight advantage over other potential master browsers -that are not preferred master browsers. Use this parameter with -care, as if you have two hosts (whether they are Windows 95 or NT or -Samba) on the same local subnet both set with preferred master to -yes, then periodically and continually they will force an election -in order to become the local master browser. -

    - If you want Samba to be a domain master browser, then it is -recommended that you also set preferred master to yes, because -Samba will not become a domain master browser for the whole of your -LAN or WAN if it is not also a local master browser on its own -broadcast isolated subnet. -

    -It is possible to configure two Samba servers to attempt to become -the domain master browser for a domain. The first server that comes -up will be the domain master browser. All other Samba servers will -attempt to become the domain master browser every 5 minutes. They -will find that another Samba server is already the domain master -browser and will fail. This provides automatic redundancy, should -the current domain master browser fail. -

    Making Samba the domain master

    -The domain master is responsible for collating the browse lists of -multiple subnets so that browsing can occur between subnets. You can -make Samba act as the domain master by setting domain master = yes -in smb.conf. By default it will not be a domain master. -

    -Note that you should not set Samba to be the domain master for a -workgroup that has the same name as an NT Domain. -

    -When Samba is the domain master and the master browser, it will listen -for master announcements (made roughly every twelve minutes) from local -master browsers on other subnets and then contact them to synchronise -browse lists. -

    -If you want Samba to be the domain master then I suggest you also set -the os level high enough to make sure it wins elections, and set -preferred master to yes, to get Samba to force an election on -startup. -

    -Note that all your servers (including Samba) and clients should be -using a WINS server to resolve NetBIOS names. If your clients are only -using broadcasting to resolve NetBIOS names, then two things will occur: +For subnets other than the one containing the Windows NT PDC, you may set up Samba servers as Local Master Browsers as +described. To make a Samba server a Local Master Browser, set the following options in the [global] section +of the smb.conf file as shown in : +

    +

    Example 10.4. Local Master Browser smb.conf

    [global]
    domain master = no
    local master = yes
    preferred master = yes
    os level = 65

    +

    +If you wish to have a Samba server fight the election with machines on the same subnet you +may set the os level parameter to lower levels. +By doing this you can tune the order of machines that will become Local Master Browsers if +they are running. For more details on this refer to . +

    +If you have Windows NT machines that are members of the domain on all subnets and you are +sure they will always be running, you can disable Samba from taking part in browser elections +and ever becoming a Local Master Browser by setting the following options in the +[global] section of the smb.conf file as shown in : +

    +

    Example 10.5. smb.conf for not being a master browser

    [global]
    domain master = no
    local master = no
    preferred master = no
    os level = 0

    +

    Forcing Samba to Be the Master

    +Who becomes the master browser is determined by an election process using broadcasts. Each election packet contains a number of parameters +that determine what precedence (bias) a host should have in the election. By default Samba uses a low precedence and thus loses +elections to just about every Windows network server or client. +

    +If you want Samba to win elections, set the os level +global option in smb.conf to a higher number. It defaults to zero. Using 34 would make it win +all elections every other system (except other samba systems). +

    +An os level of two would make it beat Windows for Workgroups and Windows 9x/Me, but not MS Windows +NT/200x Server. An MS Windows NT/200x Server Domain Controller uses level 32. The maximum os level is 255. +

    +If you want Samba to force an election on startup, set the +preferred master global option in smb.conf to yes. +Samba will then have a slight advantage over other potential master browsers that are not Perferred Master Browsers. +Use this parameter with care, as if you have two hosts (whether they are Windows 9x/Me or +NT/200x/XP or Samba) on the same local subnet both set with preferred master +to yes, then periodically and continually they will force an election in order +to become the Local Master Browser. +

    +If you want Samba to be a Domain Master Browser, then it is recommended that +you also set preferred master to yes, because +Samba will not become a Domain Master Browser for the whole of your LAN or WAN if it is not also a +Local Master Browser on its own broadcast isolated subnet. +

    +It is possible to configure two Samba servers to attempt to become the Domain Master Browser for a domain. The first server that comes +up will be the Domain Master Browser. All other Samba servers will attempt to become the Domain Master Browser every five minutes. They +will find that another Samba server is already the domain master browser and will fail. This provides automatic redundancy, should +the current Domain Master Browser fail. +

    Making Samba the Domain Master

    +The domain master is responsible for collating the browse lists of multiple subnets so browsing can occur between subnets. You can +make Samba act as the Domain Master by setting domain master = yes +in smb.conf. By default it will not be a Domain Master. +

    +Do not set Samba to be the Domain Master for a workgroup that has the same name as an NT/200x Domain. +If Samba is configured to be the Domain Master for a workgroup that is present on the same +network as a Windows NT/200x domain that has the same name, network browsing problems will +certainly be experienced. +

    +When Samba is the Domain Master and the Master Browser, it will listen for master +announcements (made roughly every twelve minutes) from Local Master Browsers on +other subnets and then contact them to synchronize browse lists. +

    +If you want Samba to be the domain master, you should also set the +os level high enough to make sure it wins elections, and +set preferred master to yes, to +get Samba to force an election on startup. +

    +All servers (including Samba) and clients should be using a WINS server to resolve NetBIOS names. If your +clients are only using broadcasting to resolve NetBIOS names, then two things will occur:

    1. - your local master browsers will be unable to find a domain master - browser, as it will only be looking on the local subnet. + Local Master Browsers will be unable to find a Domain Master Browser, as they will be looking only on the local subnet.

    2. - if a client happens to get hold of a domain-wide browse list, and - a user attempts to access a host in that list, it will be unable to - resolve the NetBIOS name of that host. + If a client happens to get hold of a domain-wide browse list and a user attempts to access a + host in that list, it will be unable to resolve the NetBIOS name of that host.

    If, however, both Samba and your clients are using a WINS server, then:

    1. - your local master browsers will contact the WINS server and, as long as - Samba has registered that it is a domain master browser with the WINS - server, your local master browser will receive Samba's IP address - as its domain master browser. -

    2. - when a client receives a domain-wide browse list, and a user attempts - to access a host in that list, it will contact the WINS server to - resolve the NetBIOS name of that host. as long as that host has - registered its NetBIOS name with the same WINS server, the user will - be able to see that host. -

    Note about broadcast addresses

    -If your network uses a "0" based broadcast address (for example if it -ends in a 0) then you will strike problems. Windows for Workgroups -does not seem to support a 0's broadcast and you will probably find -that browsing and name lookups won't work. -

    Multiple interfaces

    -Samba now supports machines with multiple network interfaces. If you -have multiple interfaces then you will need to use the interfaces -option in smb.conf to configure them. -

    Use of the Remote Announce parameter

    -The remote announce parameter of + Local master browsers will contact the WINS server and, as long as Samba has registered that it is a Domain Master Browser with the WINS + server, the Local Master Browser will receive Samba's IP address as its Domain Master Browser. +

  • + When a client receives a domain-wide browse list and a user attempts to access a host in that list, it will contact the WINS server to + resolve the NetBIOS name of that host. As long as that host has registered its NetBIOS name with the same WINS server, the user will + be able to see that host. +

  • Note about Broadcast Addresses

    +If your network uses a 0 based broadcast address (for example, if it ends in a 0) then you will strike problems. Windows for Workgroups +does not seem to support a zeros broadcast and you will probably find that browsing and name lookups will not work. +

    Multiple Interfaces

    +Samba supports machines with multiple network interfaces. If you have multiple interfaces, you will +need to use the interfaces option in smb.conf to configure them. +

    Use of the Remote Announce Parameter

    +The remote announce parameter of smb.conf can be used to forcibly ensure that all the NetBIOS names on a network get announced to a remote network. -The syntax of the remote announce parameter is: +The syntax of the remote announce parameter is:

    remote announce = a.b.c.d [e.f.g.h] ...

    or

    remote announce = a.b.c.d/WORKGROUP [e.f.g.h/WORKGROUP] ...

    where: -

    a.b.c.d and -e.f.g.h

    - - - - is either the LMB (Local Master Browser) IP address -or the broadcast address of the remote network. -ie: the LMB is at 192.168.1.10, or the address -could be given as 192.168.1.255 where the netmask -is assumed to be 24 bits (255.255.255.0). -When the remote announcement is made to the broadcast -address of the remote network, every host will receive -our announcements. This is noisy and therefore -undesirable but may be necessary if we do NOT know -the IP address of the remote LMB.

    WORKGROUP

    is optional and can be either our own workgroup -or that of the remote network. If you use the -workgroup name of the remote network then our -NetBIOS machine names will end up looking like -they belong to that workgroup, this may cause -name resolution problems and should be avoided. -

    -

    Use of the Remote Browse Sync parameter

    -The remote browse sync parameter of -smb.conf is used to announce to -another LMB that it must synchronise its NetBIOS name list with our -Samba LMB. It works ONLY if the Samba server that has this option is +

    a.b.c.d and e.f.g.h

    + + + is either the LMB (Local Master Browser) IP address or the broadcast address of the remote network. + i.e., the LMB is at 192.168.1.10, or the address could be given as 192.168.1.255 where the netmask + is assumed to be 24 bits (255.255.255.0). When the remote announcement is made to the broadcast + address of the remote network, every host will receive our announcements. This is noisy and therefore + undesirable but may be necessary if we do not know the IP address of the remote LMB. +

    WORKGROUP

    is optional and can be either our own workgroup or that of the remote network. If you use the + workgroup name of the remote network, our NetBIOS machine names will end up looking like + they belong to that workgroup. This may cause name resolution problems and should be avoided. +

    +

    Use of the Remote Browse Sync Parameter

    +The remote browse sync parameter of +smb.conf is used to announce to another LMB that it must synchronize its NetBIOS name list with our +Samba LMB. This works only if the Samba server that has this option is simultaneously the LMB on its network segment.

    -The syntax of the remote browse sync parameter is: +The syntax of the remote browse sync parameter is:

    remote browse sync = a.b.c.d

    where a.b.c.d is either the IP address of the remote LMB or else is the network broadcast address of the remote segment. -

    WINS - The Windows Internetworking Name Server

    -Use of WINS (either Samba WINS or MS Windows NT Server WINS) is highly +

    WINS The Windows Internetworking Name Server

    +Use of WINS (either Samba WINS or MS Windows NT Server WINS) is highly recommended. Every NetBIOS machine registers its name together with a name_type value for each of several types of service it has available. -eg: It registers its name directly as a unique (the type 0x03) name. +It registers its name directly as a unique (the type 0x03) name. It also registers its name if it is running the LanManager compatible server service (used to make shares and printers available to other users) by registering the server (the type 0x20) name.

    All NetBIOS names are up to 15 characters in length. The name_type variable -is added to the end of the name - thus creating a 16 character name. Any +is added to the end of the name, thus creating a 16 character name. Any name that is shorter than 15 characters is padded with spaces to the 15th -character. ie: All NetBIOS names are 16 characters long (including the +character. Thus, all NetBIOS names are 16 characters long (including the name_type information).

    -WINS can store these 16 character names as they get registered. A client +WINS can store these 16-character names as they get registered. A client that wants to log onto the network can ask the WINS server for a list of all names that have registered the NetLogon service name_type. This saves broadcast traffic and greatly expedites logon processing. Since broadcast -name resolution can not be used across network segments this type of -information can only be provided via WINS or via statically configured -lmhosts files that must reside on all clients in the +name resolution cannot be used across network segments this type of +information can only be provided via WINS or via a statically configured +lmhosts file that must reside on all clients in the absence of WINS.

    -WINS also serves the purpose of forcing browse list synchronisation by all -LMB's. LMB's must synchronise their browse list with the DMB (domain master -browser) and WINS helps the LMB to identify it's DMB. By definition this -will work only within a single workgroup. Note that the domain master browser -has NOTHING to do with what is referred to as an MS Windows NT Domain. The +WINS also serves the purpose of forcing browse list synchronization by all +LMBs. LMBs must synchronize their browse list with the DMB (Domain Master +Browser) and WINS helps the LMB to identify its DMB. By definition this +will work only within a single workgroup. Note that the Domain Master Browser +has nothing to do with what is referred to as an MS Windows NT Domain. The later is a reference to a security environment while the DMB refers to the master controller for browse list information only.

    -Use of WINS will work correctly only if EVERY client TCP/IP protocol stack -has been configured to use the WINS server/s. Any client that has not been -configured to use the WINS server will continue to use only broadcast based -name registration so that WINS may NEVER get to know about it. In any case, +WINS will work correctly only if every client TCP/IP protocol stack +has been configured to use the WINS servers. Any client that has not been +configured to use the WINS server will continue to use only broadcast-based +name registration so WINS may never get to know about it. In any case, machines that have not registered with a WINS server will fail name to address lookup attempts by other clients and will therefore cause workstation access errors.

    To configure Samba as a WINS server just add -wins support = yes to the smb.conf +wins support = yes to the smb.conf file [global] section.

    To configure Samba to register with a WINS server just add -wins server = a.b.c.d to your smb.conf file [global] section. +wins server = a.b.c.d +to your smb.conf file [global] section.

    Important

    -Never use both wins support = yes together -with wins server = a.b.c.d -particularly not using it's own IP address. -Specifying both will cause nmbd to refuse to start! -

    Setting up a WINS server

    -Either a Samba machine or a Windows NT Server machine may be set up -as a WINS server. To set a Samba machine to be a WINS server you must -add the following option to the smb.conf file on the selected machine : -in the [global] section add the line -

    -

    wins support = yes

    +Never use both wins support = yes together +with wins server = a.b.c.d +particularly not using its own IP address. Specifying both will cause nmbd to refuse to start! +

    WINS Server Configuration

    +Either a Samba Server or a Windows NT Server machine may be set up +as a WINS server. To configure a Samba Server to be a WINS server you must +add to the smb.conf file on the selected Server the following line to +the [global] section: +

    +

    wins support = yes

    Versions of Samba prior to 1.9.17 had this parameter default to -yes. If you have any older versions of Samba on your network it is +yes. If you have any older versions of Samba on your network it is strongly suggested you upgrade to a recent version, or at the very -least set the parameter to 'no' on all these machines. +least set the parameter to “no” on all these machines.

    -Machines with wins support = yes will keep a list of +Machines configured with wins support = yes will keep a list of all NetBIOS names registered with them, acting as a DNS for NetBIOS names.

    -You should set up only ONE WINS server. Do NOT set the -wins support = yes option on more than one Samba +It is strongly recommended to set up only one WINS server. Do not set the +wins support = yes option on more than one Samba server.

    -To set up a Windows NT Server as a WINS server you need to set up -the WINS service - see your NT documentation for details. Note that -Windows NT WINS Servers can replicate to each other, allowing more -than one to be set up in a complex subnet environment. As Microsoft -refuses to document these replication protocols, Samba cannot currently -participate in these replications. It is possible in the future that -a Samba->Samba WINS replication protocol may be defined, in which -case more than one Samba machine could be set up as a WINS server -but currently only one Samba server should have the -wins support = yes parameter set. -

    -After the WINS server has been configured you must ensure that all + +To configure Windows NT/200x Server as a WINS server, install and configure +the WINS service. See the Windows NT/200x documentation for details. +Windows NT/200x WINS servers can replicate to each other, allowing more +than one to be set up in a complex subnet environment. As Microsoft +refuses to document the replication protocols, Samba cannot currently +participate in these replications. It is possible in the future that +a Samba-to-Samba WINS replication protocol may be defined, in which +case more than one Samba machine could be set up as a WINS server. +Currently only one Samba server should have the +wins support = yes parameter set. +

    +After the WINS server has been configured, you must ensure that all machines participating on the network are configured with the address -of this WINS server. If your WINS server is a Samba machine, fill in +of this WINS server. If your WINS server is a Samba machine, fill in the Samba machine IP address in the Primary WINS Server field of the Control Panel->Network->Protocols->TCP->WINS Server dialogs -in Windows 95 or Windows NT. To tell a Samba server the IP address -of the WINS server add the following line to the [global] section of -all smb.conf files : +in Windows 9x/Me or Windows NT/200x. To tell a Samba server the IP address +of the WINS server, add the following line to the [global] section of +all smb.conf files:

    -

    wins server = <name or IP address>

    +

    wins server = <name or IP address>

    where <name or IP address> is either the DNS name of the WINS server machine or its IP address.

    -Note that this line MUST NOT BE SET in the smb.conf file of the Samba -server acting as the WINS server itself. If you set both the -wins support = yes option and the -wins server = <name> option then -nmbd will fail to start. +This line must not be set in the smb.conf file of the Samba +server acting as the WINS server itself. If you set both the +wins support = yes option and the +wins server = <name> option then +nmbd will fail to start.

    -There are two possible scenarios for setting up cross subnet browsing. -The first details setting up cross subnet browsing on a network containing -Windows 95, Samba and Windows NT machines that are not configured as -part of a Windows NT Domain. The second details setting up cross subnet +There are two possible scenarios for setting up cross-subnet browsing. +The first details setting up cross-subnet browsing on a network containing +Windows 9x/Me, Samba and Windows NT/200x machines that are not configured as +part of a Windows NT Domain. The second details setting up cross-subnet browsing on networks that contain NT Domains. -

    WINS Replication

    +

    WINS Replication

    + Samba-3 permits WINS replication through the use of the wrepld utility. This tool is not currently capable of being used as it is still in active development. -As soon as this tool becomes moderately functional we will prepare man pages and enhance this +As soon as this tool becomes moderately functional, we will prepare man pages and enhance this section of the documentation to provide usage and technical details. -

    Static WINS Entries

    +

    Static WINS Entries

    Adding static entries to your Samba WINS server is actually fairly easy. All you have to do is add a line to wins.dat, typically located in /usr/local/samba/var/locks.

    -Entries in wins.dat take the form of +Entries in wins.dat take the form of:

     "NAME#TYPE" TTL ADDRESS+ FLAGS
    @@ -2728,61 +2851,61 @@ time-to-live as an absolute time in seconds, ADDRESS+ is one or more
     addresses corresponding to the registration and FLAGS are the NetBIOS
     flags for the registration.
     

    -A typical dynamic entry looks like: +A typical dynamic entry looks like this:

     "MADMAN#03" 1055298378 192.168.1.2 66R
     

    -To make it static, all that has to be done is set the TTL to 0: +To make it static, all that has to be done is set the TTL to 0, like this:

     "MADMAN#03" 0 192.168.1.2 66R
     

    -Though this method works with early Samba-3 versions, there's a +Though this method works with early Samba-3 versions, there is a possibility that it may change in future versions if WINS replication is added. -

    Helpful Hints

    +

    Helpful Hints

    The following hints should be carefully considered as they are stumbling points for many new network administrators. -

    Windows Networking Protocols

    Warning

    -Do NOT use more than one (1) protocol on MS Windows machines +

    Windows Networking Protocols

    Warning

    +Do not use more than one protocol on MS Windows machines.

    -A very common cause of browsing problems results from installing more than +A common cause of browsing problems results from installing more than one protocol on an MS Windows machine.

    Every NetBIOS machine takes part in a process of electing the LMB (and DMB) every 15 minutes. A set of election criteria is used to determine the order of precedence for winning this election process. A machine running Samba or -Windows NT will be biased so that the most suitable machine will predictably -win and thus retain it's role. +Windows NT will be biased so the most suitable machine will predictably +win and thus retain its role.

    -The election process is "fought out" so to speak over every NetBIOS network -interface. In the case of a Windows 9x machine that has both TCP/IP and IPX -installed and has NetBIOS enabled over both protocols the election will be -decided over both protocols. As often happens, if the Windows 9x machine is +The election process is “fought out” so to speak over every NetBIOS network +interface. In the case of a Windows 9x/Me machine that has both TCP/IP and IPX +installed and has NetBIOS enabled over both protocols, the election will be +decided over both protocols. As often happens, if the Windows 9x/Me machine is the only one with both protocols then the LMB may be won on the NetBIOS interface over the IPX protocol. Samba will then lose the LMB role as Windows -9x will insist it knows who the LMB is. Samba will then cease to function -as an LMB and thus browse list operation on all TCP/IP only machines will +9x/Me will insist it knows who the LMB is. Samba will then cease to function +as an LMB and thus browse list operation on all TCP/IP-only machines will fail. -

    -Windows 95, 98, 98se, Me are referred to generically as Windows 9x. -The Windows NT4, 2000, XP and 2003 use common protocols. These are roughly -referred to as the WinNT family, but it should be recognised that 2000 and +

    +Windows 95, 98, 98se, and Me are referred to generically as Windows 9x/Me. +The Windows NT4, 200x, and XP use common protocols. These are roughly +referred to as the Windows NT family, but it should be recognized that 2000 and XP/2003 introduce new protocol extensions that cause them to behave -differently from MS Windows NT4. Generally, where a server does NOT support +differently from MS Windows NT4. Generally, where a server does not support the newer or extended protocol, these will fall back to the NT4 protocols. -

    -The safest rule of all to follow it this - USE ONLY ONE PROTOCOL! -

    Name Resolution Order

    +

    +The safest rule of all to follow is: use only one protocol! +

    Name Resolution Order

    Resolution of NetBIOS names to IP addresses can take place using a number of methods. The only ones that can provide NetBIOS name_type information are: -

    • WINS: the best tool!

    • LMHOSTS: is static and hard to maintain.

    • Broadcast: uses UDP and can not resolve names across remote segments.

    -Alternative means of name resolution includes: -

    • /etc/hosts: is static, hard to maintain, and lacks name_type info

    • DNS: is a good choice but lacks essential name_type info.

    -Many sites want to restrict DNS lookups and want to avoid broadcast name +

    • WINS the best tool.
    • LMHOSTS static and hard to maintain.
    • Broadcast uses UDP and cannot resolve names across remote segments.

    +Alternative means of name resolution include: +

    • Static /etc/hosts hard to maintain, and lacks name_type info.
    • DNS is a good choice but lacks essential name_type info.

    +Many sites want to restrict DNS lookups and avoid broadcast name resolution traffic. The name resolve order parameter is of great help here. The syntax of the name resolve order parameter is:

    name resolve order = wins lmhosts bcast host

    @@ -2790,482 +2913,546 @@ The syntax of the name resolve order parameter

    name resolve order = wins lmhosts (eliminates bcast and host)

    The default is:

    name resolve order = host lmhost wins bcast

    -where "host" refers to the native methods used by the UNIX system +where “host” refers to the native methods used by the UNIX system to implement the gethostbyname() function call. This is normally controlled by /etc/host.conf, /etc/nsswitch.conf and /etc/resolv.conf. -

    Technical Overview of browsing

    +

    Technical Overview of Browsing

    SMB networking provides a mechanism by which clients can access a list -of machines in a network, a so-called browse list. This list +of machines in a network, a so-called browse list. This list contains machines that are ready to offer file and/or print services to other machines within the network. Thus it does not include -machines which aren't currently able to do server tasks. The browse -list is heavily used by all SMB clients. Configuration of SMB +machines that aren't currently able to do server tasks. The browse +list is heavily used by all SMB clients. Configuration of SMB browsing has been problematic for some Samba users, hence this document.

    -MS Windows 2000 and later, as with Samba 3 and later, can be +MS Windows 2000 and later versions, as with Samba-3 and later versions, can be configured to not use NetBIOS over TCP/IP. When configured this way, it is imperative that name resolution (using DNS/LDAP/ADS) be correctly -configured and operative. Browsing will NOT work if name resolution +configured and operative. Browsing will not work if name resolution from SMB machine names to IP addresses does not function correctly.

    -Where NetBIOS over TCP/IP is enabled use of a WINS server is highly +Where NetBIOS over TCP/IP is enabled, use of a WINS server is highly recommended to aid the resolution of NetBIOS (SMB) names to IP addresses. WINS allows remote segment clients to obtain NetBIOS name_type information -that can NOT be provided by any other means of name resolution. -

    Browsing support in Samba

    -Samba facilitates browsing. The browsing is supported by nmbd +that cannot be provided by any other means of name resolution. +

    Browsing Support in Samba

    +Samba facilitates browsing. The browsing is supported by nmbd and is also controlled by options in the smb.conf file. Samba can act as a local browse master for a workgroup and the ability to support domain logons and scripts is now available.

    -Samba can also act as a domain master browser for a workgroup. This -means that it will collate lists from local browse masters into a -wide area network server list. In order for browse clients to +Samba can also act as a Domain Master Browser for a workgroup. This +means that it will collate lists from Local Master Browsers into a +wide area network server list. In order for browse clients to resolve the names they may find in this list, it is recommended that both Samba and your clients use a WINS server.

    -Note that you should NOT set Samba to be the domain master for a -workgroup that has the same name as an NT Domain: on each wide area -network, you must only ever have one domain master browser per workgroup, -regardless of whether it is NT, Samba or any other type of domain master -that is providing this service. +Do not set Samba to be the Domain Master for a workgroup that has the same +name as an NT Domain. On each wide area network, you must only ever have one +Domain Master Browser per workgroup, regardless of whether it is NT, Samba +or any other type of domain master that is providing this service.

    Note

    -Nmbd can be configured as a WINS server, but it is not -necessary to specifically use Samba as your WINS server. MS Windows -NT4, Server or Advanced Server 2000 or 2003 can be configured as -your WINS server. In a mixed NT/2000/2003 server and Samba environment on +nmbd can be configured as a WINS server, but it is not +necessary to specifically use Samba as your WINS server. MS Windows +NT4, Server or Advanced Server 200x can be configured as +your WINS server. In a mixed NT/200x server and Samba environment on a Wide Area Network, it is recommended that you use the Microsoft -WINS server capabilities. In a Samba-only environment, it is -recommended that you use one and only one Samba server as your WINS server. +WINS server capabilities. In a Samba-only environment, it is +recommended that you use one and only one Samba server as the WINS server.

    To get browsing to work you need to run nmbd as usual, but will need -to use the workgroup option in smb.conf +to use the workgroup option in smb.conf to control what workgroup Samba becomes a part of.

    Samba also has a useful option for a Samba server to offer itself for -browsing on another subnet. It is recommended that this option is only -used for 'unusual' purposes: announcements over the internet, for -example. See remote announce in the -smb.conf man page. -

    Problem resolution

    -If something doesn't work then hopefully the log.nmbd file will help -you track down the problem. Try a debug level of 2 or 3 for finding +browsing on another subnet. It is recommended that this option is only +used for “unusual” purposes: announcements over the Internet, for +example. See remote announce in the +smb.conf man page. +

    Problem Resolution

    +If something does not work, the log.nmbd file will help +to track down the problem. Try a log level of 2 or 3 for finding problems. Also note that the current browse list usually gets stored in text form in a file called browse.dat.

    -Note that if it doesn't work for you, then you should still be able to -type the server name as \\SERVER in filemanager then -hit enter and filemanager should display the list of available shares. +If it does not work, you should still be able to +type the server name as \\SERVER in filemanager, then +press enter and filemanager should display the list of available shares.

    -Some people find browsing fails because they don't have the global -guest account set to a valid account. Remember that the -IPC$ connection that lists the shares is done as guest, and thus you must -have a valid guest account. -

    -MS Windows 2000 and upwards (as with Samba) can be configured to disallow -anonymous (ie: Guest account) access to the IPC$ share. In that case, the +Some people find browsing fails because they do not have the global +guest account set to a valid account. Remember that the +IPC$ connection that lists the shares is done as guest and, thus, you must have a valid guest account. +

    +MS Windows 2000 and later (as with Samba) can be configured to disallow +anonymous (i.e., guest account) access to the IPC$ share. In that case, the MS Windows 2000/XP/2003 machine acting as an SMB/CIFS client will use the -name of the currently logged in user to query the IPC$ share. MS Windows -9X clients are not able to do this and thus will NOT be able to browse +name of the currently logged-in user to query the IPC$ share. MS Windows +9x/Me clients are not able to do this and thus will not be able to browse server resources. -

    +

    The other big problem people have is that their broadcast address, -netmask or IP address is wrong (specified with the "interfaces" option +netmask or IP address is wrong (specified with the interfaces option in smb.conf) -

    Browsing across subnets

    -Since the release of Samba 1.9.17(alpha1), Samba has supported the +

    Cross-Subnet Browsing

    + +Since the release of Samba 1.9.17 (alpha1), Samba has supported the replication of browse lists across subnet boundaries. This section describes how to set this feature up in different settings.

    -To see browse lists that span TCP/IP subnets (ie. networks separated -by routers that don't pass broadcast traffic), you must set up at least -one WINS server. The WINS server acts as a DNS for NetBIOS names, allowing -NetBIOS name to IP address translation to be done by doing a direct -query of the WINS server. This is done via a directed UDP packet on -port 137 to the WINS server machine. The reason for a WINS server is -that by default, all NetBIOS name to IP address translation is done -by broadcasts from the querying machine. This means that machines +To see browse lists that span TCP/IP subnets (i.e., networks separated +by routers that do not pass broadcast traffic), you must set up at least +one WINS server. The WINS server acts as a DNS for NetBIOS names. This will +allow NetBIOS name-to-IP address translation to be completed by a direct +query of the WINS server. This is done via a directed UDP packet on +port 137 to the WINS server machine. The WINS server avoids the necessity +of default NetBIOS name-to-IP address translation, which is done +using UDP broadcasts from the querying machine. This means that machines on one subnet will not be able to resolve the names of machines on another subnet without using a WINS server.

    Remember, for browsing across subnets to work correctly, all machines, -be they Windows 95, Windows NT, or Samba servers must have the IP address +be they Windows 95, Windows NT or Samba servers, must have the IP address of a WINS server given to them by a DHCP server, or by manual configuration -(for Win95 and WinNT, this is in the TCP/IP Properties, under Network -settings) for Samba this is in the smb.conf file. -

    How does cross subnet browsing work ?

    -Cross subnet browsing is a complicated dance, containing multiple -moving parts. It has taken Microsoft several years to get the code +(for Windows 9x/Me and Windows NT/200x/XP, this is in the TCP/IP Properties, under Network +settings); for Samba, this is in the smb.conf file. +

    Behavior of Cross-Subnet Browsing

    +Cross-subnet Browsing is a complicated dance, containing multiple +moving parts. It has taken Microsoft several years to get the code that achieves this correct, and Samba lags behind in some areas. -Samba is capable of cross subnet browsing when configured correctly. -

    - Consider a network set up as in the diagram below. -

    Figure 10.1. Cross subnet browsing example

    Cross subnet browsing example

    -Consisting of 3 subnets (1, 2, 3) connected by two routers -(R1, R2) - these do not pass broadcasts. Subnet 1 has 5 machines -on it, subnet 2 has 4 machines, subnet 3 has 4 machines. Assume -for the moment that all these machines are configured to be in the -same workgroup (for simplicity's sake). Machine N1_C on subnet 1 -is configured as Domain Master Browser (ie. it will collate the -browse lists for the workgroup). Machine N2_D is configured as +Samba is capable of cross-subnet browsing when configured correctly. +

    +Consider a network set up as . +

    Figure 10.1. Cross-Subnet Browsing Example.

    Cross-Subnet Browsing Example.

    +This consists of 3 subnets (1, 2, 3) connected by two routers +(R1, R2) which do not pass broadcasts. Subnet 1 has five machines +on it, subnet 2 has four machines, subnet 3 has four machines. Assume +for the moment that all machines are configured to be in the +same workgroup (for simplicity's sake). Machine N1_C on subnet 1 +is configured as Domain Master Browser (i.e., it will collate the +browse lists for the workgroup). Machine N2_D is configured as WINS server and all the other machines are configured to register their NetBIOS names with it.

    -As all these machines are booted up, elections for master browsers -will take place on each of the three subnets. Assume that machine +As these machines are booted up, elections for master browsers +will take place on each of the three subnets. Assume that machine N1_C wins on subnet 1, N2_B wins on subnet 2, and N3_D wins on -subnet 3 - these machines are known as local master browsers for -their particular subnet. N1_C has an advantage in winning as the -local master browser on subnet 1 as it is set up as Domain Master +subnet 3. These machines are known as Local Master Browsers for +their particular subnet. N1_C has an advantage in winning as the +Local Master Browser on subnet 1 as it is set up as Domain Master Browser.

    On each of the three networks, machines that are configured to offer sharing services will broadcast that they are offering -these services. The local master browser on each subnet will +these services. The Local Master Browser on each subnet will receive these broadcasts and keep a record of the fact that -the machine is offering a service. This list of records is -the basis of the browse list. For this case, assume that -all the machines are configured to offer services so all machines +the machine is offering a service. This list of records is +the basis of the browse list. For this case, assume that +all the machines are configured to offer services, so all machines will be on the browse list.

    -For each network, the local master browser on that network is -considered 'authoritative' for all the names it receives via -local broadcast. This is because a machine seen by the local -master browser via a local broadcast must be on the same -network as the local master browser and thus is a 'trusted' -and 'verifiable' resource. Machines on other networks that -the local master browsers learn about when collating their -browse lists have not been directly seen - these records are -called 'non-authoritative'. +For each network, the Local Master Browser on that network is +considered “authoritative” for all the names it receives via +local broadcast. This is because a machine seen by the Local Master +Browser via a local broadcast must be on the same network as the +Local Master Browser and thus is a “trusted” +and “verifiable” resource. Machines on other networks that +the Local Master Browsers learn about when collating their +browse lists have not been directly seen. These records are +called “non-authoritative.

    -At this point the browse lists look as follows (these are -the machines you would see in your network neighborhood if -you looked in it on a particular network right now). +At this point the browse lists appear as shown in (these are +the machines you would see in your network neighborhood if you looked in it on a particular network right now).

    -

    Table 10.1. Browse subnet example 1

    SubnetBrowse MasterList
    Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E
    Subnet2N2_BN2_A, N2_B, N2_C, N2_D
    Subnet3N3_DN3_A, N3_B, N3_C, N3_D

    +

    Table 10.1. Browse Subnet Example 1

    SubnetBrowse MasterList
    Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E
    Subnet2N2_BN2_A, N2_B, N2_C, N2_D
    Subnet3N3_DN3_A, N3_B, N3_C, N3_D

    -Note that at this point all the subnets are separate, no -machine is seen across any of the subnets. +At this point all the subnets are separate, and no machine is seen across any of the subnets.

    -Now examine subnet 2. As soon as N2_B has become the local -master browser it looks for a Domain master browser to synchronize -its browse list with. It does this by querying the WINS server +Now examine subnet 2. As soon as N2_B has become the Local +Master Browser it looks for a Domain Master Browser with which to synchronize +its browse list. It does this by querying the WINS server (N2_D) for the IP address associated with the NetBIOS name -WORKGROUP<1B>. This name was registered by the Domain master -browser (N1_C) with the WINS server as soon as it was booted. +WORKGROUP<1B>. This name was registered by the Domain Master +Browser (N1_C) with the WINS server as soon as it was started.

    -Once N2_B knows the address of the Domain master browser it -tells it that is the local master browser for subnet 2 by -sending a MasterAnnouncement packet as a UDP port 138 packet. -It then synchronizes with it by doing a NetServerEnum2 call. This +Once N2_B knows the address of the Domain Master Browser, it +tells it that is the Local Master Browser for subnet 2 by +sending a MasterAnnouncement packet as a UDP port 138 packet. +It then synchronizes with it by doing a NetServerEnum2 call. This tells the Domain Master Browser to send it all the server -names it knows about. Once the domain master browser receives -the MasterAnnouncement packet it schedules a synchronization -request to the sender of that packet. After both synchronizations -are done the browse lists look like : -

    -

    Table 10.2. Browse subnet example 2

    SubnetBrowse MasterList
    Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E, +names it knows about. Once the Domain Master Browser receives +the MasterAnnouncement packet, it schedules a synchronization +request to the sender of that packet. After both synchronizations +are complete the browse lists look as shown in : +

    Table 10.2. Browse Subnet Example 2

    SubnetBrowse MasterList
    Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E, N2_A(*), N2_B(*), N2_C(*), N2_D(*)
    Subnet2N2_BN2_A, N2_B, N2_C, N2_D, N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*)
    Subnet3N3_DN3_A, N3_B, N3_C, N3_D

    - -Servers with a (*) after them are non-authoritative names. +Servers with an (*) after them are non-authoritative names.

    At this point users looking in their network neighborhood on subnets 1 or 2 will see all the servers on both, users on subnet 3 will still only see the servers on their own subnet.

    The same sequence of events that occurred for N2_B now occurs -for the local master browser on subnet 3 (N3_D). When it -synchronizes browse lists with the domain master browser (N1_A) +for the Local Master Browser on subnet 3 (N3_D). When it +synchronizes browse lists with the Domain Master Browser (N1_A) it gets both the server entries on subnet 1, and those on -subnet 2. After N3_D has synchronized with N1_C and vica-versa -the browse lists look like. -

    -

    Table 10.3. Browse subnet example 3

    SubnetBrowse MasterList
    Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E, +subnet 2. After N3_D has synchronized with N1_C and vica versa, +the browse lists will appear as shown in . +

    Table 10.3. Browse Subnet Example 3

    SubnetBrowse MasterList
    Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E, N2_A(*), N2_B(*), N2_C(*), N2_D(*), N3_A(*), N3_B(*), N3_C(*), N3_D(*)
    Subnet2N2_BN2_A, N2_B, N2_C, N2_D, N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*)
    Subnet3N3_DN3_A, N3_B, N3_C, N3_D, N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*), N2_A(*), N2_B(*), N2_C(*), N2_D(*)

    - -Servers with a (*) after them are non-authoritative names. +Servers with an (*) after them are non-authoritative names.

    -At this point users looking in their network neighborhood on -subnets 1 or 3 will see all the servers on all subnets, users on +At this point, users looking in their network neighborhood on +subnets 1 or 3 will see all the servers on all subnets, while users on subnet 2 will still only see the servers on subnets 1 and 2, but not 3.

    -Finally, the local master browser for subnet 2 (N2_B) will sync again -with the domain master browser (N1_C) and will receive the missing -server entries. Finally - and as a steady state (if no machines -are removed or shut off) the browse lists will look like : -

    -

    Table 10.4. Browse subnet example 4

    SubnetBrowse MasterList
    Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E, +Finally, the Local Master Browser for subnet 2 (N2_B) will sync again +with the Domain Master Browser (N1_C) and will receive the missing +server entries. Finally, as when a steady state (if no machines +are removed or shut off) has been achieved, the browse lists will appear +as shown in . +

    Table 10.4. Browse Subnet Example 4

    SubnetBrowse MasterList
    Subnet1N1_CN1_A, N1_B, N1_C, N1_D, N1_E, N2_A(*), N2_B(*), N2_C(*), N2_D(*), N3_A(*), N3_B(*), N3_C(*), N3_D(*)
    Subnet2N2_BN2_A, N2_B, N2_C, N2_D, N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*), N3_A(*), N3_B(*), N3_C(*), N3_D(*)
    Subnet3N3_DN3_A, N3_B, N3_C, N3_D, N1_A(*), N1_B(*), N1_C(*), N1_D(*), N1_E(*), N2_A(*), N2_B(*), N2_C(*), N2_D(*)

    - -Servers with a (*) after them are non-authoritative names. +Servers with an (*) after them are non-authoritative names.

    -Synchronizations between the domain master browser and local -master browsers will continue to occur, but this should be a -steady state situation. +Synchronizations between the Domain Master Browser and Local +Master Browsers will continue to occur, but this should remain a +steady state operation.

    -If either router R1 or R2 fails the following will occur: +If either router R1 or R2 fails, the following will occur:

    1. Names of computers on each side of the inaccessible network fragments - will be maintained for as long as 36 minutes, in the network neighbourhood + will be maintained for as long as 36 minutes in the network neighborhood lists.

    2. Attempts to connect to these inaccessible computers will fail, but the - names will not be removed from the network neighbourhood lists. + names will not be removed from the network neighborhood lists.

    3. If one of the fragments is cut off from the WINS server, it will only - be able to access servers on its local subnet, by using subnet-isolated - broadcast NetBIOS name resolution. The effects are similar to that of + be able to access servers on its local subnet using subnet-isolated + broadcast NetBIOS name resolution. The effects are similar to that of losing access to a DNS server. -

    Common Errors

    +

    Common Errors

    Many questions are asked on the mailing lists regarding browsing. The majority of browsing -problems originate out of incorrect configuration of NetBIOS name resolution. Some are of +problems originate from incorrect configuration of NetBIOS name resolution. Some are of particular note. -

    How can one flush the Samba NetBIOS name cache without restarting Samba?

    -Samba's nmbd process controls all browse list handling. Under normal circumstances it is -safe to restart nmbd. This will effectively flush the Samba NetBIOS name cache and cause it -to be rebuilt. Note that this does NOT make certain that a rogue machine name will not re-appear -in the browse list. When nmbd is taken out of service another machine on the network will -become the browse master. This new list may still have the rogue entry in it. If you really -want to clear a rogue machine from the list then every machine on the network will need to be -shut down and restarted at after all machines are down. Failing a complete restart, the only +

    How Can One Flush the Samba NetBIOS Name Cache without Restarting Samba?

    + +Samba's nmbd process controls all browse list handling. Under normal circumstances it is +safe to restart nmbd. This will effectively flush the Samba NetBIOS name cache and cause it +to be rebuilt. This does not make certain that a rogue machine name will not re-appear +in the browse list. When nmbd is taken out of service, another machine on the network will +become the Browse Master. This new list may still have the rogue entry in it. If you really +want to clear a rogue machine from the list, every machine on the network will need to be +shut down and restarted after all machines are down. Failing a complete restart, the only other thing you can do is wait until the entry times out and is then flushed from the list. -This may take a long time on some networks (months). -

    My client reports "This server is not configured to list shared resources"

    +This may take a long time on some networks (perhaps months). +

    Server Resources Can Not Be Listed

    My Client Reports ‘This server is not configured to list shared resources

    Your guest account is probably invalid for some reason. Samba uses the -guest account for browsing in smbd. Check that your guest account is +guest account for browsing in smbd. Check that your guest account is valid. -

    See also guest account in the smb.conf man page.

    I get an Unable to browse the network error

    This error can have multiple causes:

    • There is no local master browser. Configure nmbd - or any other machine to serve as local master browser.

    • You can not log onto the machine that is the local master - browser. Can you logon to it as guest user?

    • There is no IP connectivity to the local master browser. - Can you reach it by broadcast?

    Chapter 11. Account Information Databases

    Jelmer R. Vernooij

    The Samba Team

    Gerald (Jerry) Carter

    Samba Team

    Jeremy Allison

    Samba Team

    John H. Terpstra

    Samba Team

    Olivier (lem) Lemaire

    May 24, 2003

    -Samba 3 implements a new capability to work concurrently with multiple account backends. -The possible new combinations of password backends allows Samba 3 a degree of flexibility +

    Also see guest account in the smb.conf man page.

    I get an `Unable to browse the network' error

    This error can have multiple causes: + +

    • There is no Local Master Browser. Configure nmbd + or any other machine to serve as Local Master Browser.

    • You cannot log onto the machine that is the local master + browser. Can you logon to it as a guest user?

    • There is no IP connectivity to the Local Master Browser. + Can you reach it by broadcast?

    Browsing of Shares and Directories is Very Slow

    + +There are only two machines on a test network. One a Samba server, the other a Windows XP machine. +Authentication and logons work perfectly, but when I try to explore shares on the Samba server, the +Windows XP client becomes unrespsonsive. Sometimes it does not respond for some minutes. Eventually, +Windows Explorer will respond and displays files and directories without problem. +display file and directory.” +

    +But, the share is immediately available from a command shell (cmd, followed by +exploration with dos command. Is this a Samba problem or is it a Windows problem? How can I solve this? +

    +Here are a few possibilities: +

    Bad Networking Hardware

    + + + Most common defective hardware problems center around low cost or defective HUBs, routers, + Network Interface Controllers (NICs) and bad wiring. If one piece of hardware is defective + the whole network may suffer. Bad networking hardware can cause data corruption. Most bad + networking hardware problems are accompanied by an increase in apparent network traffic, + but not all. +

    The Windows XP WebClient

    + A number of sites have reported similar slow network browsing problems and found that when + the WebClient service is turned off, the problem dissapears. This is certainly something + that should be explored as it is a simple solution if it works. +

    Inconsistent WINS Configuration

    + This type of problem is common when one client is configured to use a WINS server (that is + a TCP/IP configuration setting) and there is no WINS server on the network. Alternately, + this will happen is there is a WINS server and Samba is not configured to use it. The use of + WINS is highly recommended if the network is using NetBIOS over TCP/IP protocols. If use + of NetBIOS over TCP/IP is disabled on all clients, Samba should not be configured as a WINS + server neither should it be configured to use one. +

    Incorrect DNS Configuration

    + If use of NetBIOS over TCP/IP is disabled, Active Directory is in use and the DNS server + has been incorrectly configured. Refer for more information. +

    Chapter 11. Account Information Databases

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Gerald (Jerry) Carter

    Samba Team

    Jeremy Allison

    Samba Team

    Guenther Deschner

    LDAP updates

    Olivier (lem) Lemaire

    May 24, 2003

    +Samba-3 implements a new capability to work concurrently with multiple account backends. +The possible new combinations of password backends allows Samba-3 a degree of flexibility and scalability that previously could be achieved only with MS Windows Active Directory. This chapter describes the new functionality and how to get the most out of it.

    -In the course of development of Samba-3, a number of requests were received to provide the +In the development of Samba-3, a number of requests were received to provide the ability to migrate MS Windows NT4 SAM accounts to Samba-3 without the need to provide -matching UNIX/Linux accounts. We called this the Non UNIX Accounts (NUA) +matching UNIX/Linux accounts. We called this the Non-UNIX Accounts (NUA) capability. The intent was that an administrator could decide to use the tdbsam -backend and by simply specifying passdb backend = tdbsam_nua +backend and by simply specifying passdb backend = tdbsam_nua, this would allow Samba-3 to implement a solution that did not use UNIX accounts per se. Late in the development cycle, the team doing this work hit upon some obstacles that prevents this -solution from being used. Given the delays with Samba-3 release a decision was made to NOT -deliver this functionality until a better method of recognising NT Group SIDs from NT User -SIDs could be found. This feature may thus return during the life cycle for the Samba-3 series. +solution from being used. Given the delays with the Samba-3 release, a decision was made to not +deliver this functionality until a better method of recognizing NT Group SIDs from NT User +SIDs could be found. This feature may return during the life cycle for the Samba-3 series.

    Note

    -Samba-3 does NOT support Non-UNIX Account (NUA) operation for user accounts. +Samba-3 does not support Non-UNIX Account (NUA) operation for user accounts. Samba-3 does support NUA operation for machine accounts. -

    Features and Benefits

    -Samba-3 provides for complete backwards compatibility with Samba-2.2.x functionality +

    Features and Benefits

    +Samba-3 provides for complete backward compatibility with Samba-2.2.x functionality as follows: -

    Backwards Compatibility Backends

    Plain Text:

    + + + +

    Backward Compatibility Backends

    Plain Text

    This option uses nothing but the UNIX/Linux /etc/passwd - style back end. On systems that have PAM (Pluggable Authentication Modules) - support all PAM modules are supported. The behaviour is just as it was with + style backend. On systems that have Pluggable Authentication Modules (PAM) + support, all PAM modules are supported. The behavior is just as it was with Samba-2.2.x, and the protocol limitations imposed by MS Windows clients - apply likewise. -

    smbpasswd:

    - This option allows continues use of the smbpasswd + apply likewise. Please refer to for more information + regarding the limitations of Plain Text password usage. +

    smbpasswd

    + This option allows continued use of the smbpasswd file that maintains a plain ASCII (text) layout that includes the MS Windows LanMan and NT encrypted passwords as well as a field that stores some - account information. This form of password backend does NOT store any of - the MS Windows NT/200x SAM (Security Account Manager) information needed to + account information. This form of password backend does not store any of + the MS Windows NT/200x SAM (Security Account Manager) information required to provide the extended controls that are needed for more comprehensive - interoperation with MS Windows NT4 / 200x servers. + interoperation with MS Windows NT4/200x servers.

    - This backend should be used only for backwards compatibility with older + This backend should be used only for backward compatibility with older versions of Samba. It may be deprecated in future releases. -

    ldapsam_compat (Samba-2.2 LDAP Compatibility):

    +

    ldapsam_compat (Samba-2.2 LDAP Compatibility)

    There is a password backend option that allows continued operation with - a existing OpenLDAP backend that uses the Samba-2.2.x LDAP schema extension. + an existing OpenLDAP backend that uses the Samba-2.2.x LDAP schema extension. This option is provided primarily as a migration tool, although there is - no reason to force migration at this time. Note that this tool will eventually + no reason to force migration at this time. This tool will eventually be deprecated. -

    New Backends

    -Samba-3 introduces the following new password backend capabilities: -

    tdbsam:

    +

    +Samba-3 introduces a number of new password backend capabilities. + + + + +

    New Backends

    tdbsam

    This backend provides a rich database backend for local servers. This - backend is NOT suitable for multiple domain controller (ie: PDC + one + backend is not suitable for multiple Domain Controllers (i.e., PDC + one or more BDC) installations.

    The tdbsam password backend stores the old - smbpasswd information PLUS the extended MS Windows NT / 200x + smbpasswd information plus the extended MS Windows NT / 200x SAM information into a binary format TDB (trivial database) file. The inclusion of the extended information makes it possible for Samba-3 to implement the same account and system access controls that are possible - with MS Windows NT4 and MS Windows 200x based systems. + with MS Windows NT4/200x-based systems.

    The inclusion of the tdbsam capability is a direct response to user requests to allow simple site operation without the overhead of the complexities of running OpenLDAP. It is recommended to use this only - for sites that have fewer than 250 users. For larger sites or implementations + for sites that have fewer than 250 users. For larger sites or implementations, the use of OpenLDAP or of Active Directory integration is strongly recommended. -

    ldapsam:

    +

    ldapsam

    This provides a rich directory backend for distributed account installation.

    Samba-3 has a new and extended LDAP implementation that requires configuration - of OpenLDAP with a new format samba schema. The new format schema file is + of OpenLDAP with a new format Samba schema. The new format schema file is included in the examples/LDAP directory of the Samba distribution.

    The new LDAP implementation significantly expands the control abilities that were possible with prior versions of Samba. It is now possible to specify - "per user" profile settings, home directories, account access controls, and - much more. Corporate sites will see that the Samba-Team has listened to their + “per user” profile settings, home directories, account access controls, and + much more. Corporate sites will see that the Samba Team has listened to their requests both for capability and to allow greater scalability. -

    mysqlsam (MySQL based backend):

    - It is expected that the MySQL based SAM will be very popular in some corners. - This database backend will be on considerable interest to sites that want to +

    mysqlsam (MySQL based backend)

    + It is expected that the MySQL-based SAM will be very popular in some corners. + This database backend will be of considerable interest to sites that want to leverage existing MySQL technology. -

    xmlsam (XML based datafile):

    +

    xmlsam (XML based datafile)

    + Allows the account and password data to be stored in an XML format - data file. This backend can not be used for normal operation, it can only + data file. This backend cannot be used for normal operation, it can only be used in conjunction with pdbedit's pdb2pdb functionality. The DTD that is used might be subject to changes in the future.

    - The xmlsam option can be useful for account migration between database + The xmlsam option can be useful for account migration between database backends or backups. Use of this tool will allow the data to be edited before migration into another backend format. -

    Technical Information

    - Old windows clients send plain text passwords over the wire. Samba can check these - passwords by crypting them and comparing them to the hash stored in the unix user database. +

    Technical Information

    + Old Windows clients send plain text passwords over the wire. Samba can check these + passwords by encrypting them and comparing them to the hash stored in the UNIX user database.

    - Newer windows clients send encrypted passwords (so-called Lanman and NT hashes) over + + Newer Windows clients send encrypted passwords (so-called Lanman and NT hashes) over the wire, instead of plain text passwords. The newest clients will send only encrypted passwords and refuse to send plain text passwords, unless their registry is tweaked.

    - These passwords can't be converted to unix style encrypted passwords. Because of that, - you can't use the standard unix user database, and you have to store the Lanman and NT + These passwords can't be converted to UNIX-style encrypted passwords. Because of that, + you can't use the standard UNIX user database, and you have to store the Lanman and NT hashes somewhere else.

    - In addition to differently encrypted passwords, windows also stores certain data for each - user that is not stored in a unix user database. e.g: workstations the user may logon from, - the location where the users' profile is stored, and so on. Samba retrieves and stores this - information using a passdb backend. Commonly available backends are LDAP, plain text - file, MySQL and nisplus. For more information, see the man page for smb.conf regarding the - passdb backend parameter. -

    Figure 11.1. IDMAP

    IDMAP

    Important Notes About Security

    - The unix and SMB password encryption techniques seem similar on the surface. This - similarity is, however, only skin deep. The unix scheme typically sends clear text + In addition to differently encrypted passwords, Windows also stores certain data for each + user that is not stored in a UNIX user database. For example, workstations the user may logon from, + the location where the user's profile is stored, and so on. Samba retrieves and stores this + information using a passdb backend. Commonly available backends are LDAP, plain text + file, and MySQL. For more information, see the man page for smb.conf regarding the + passdb backend parameter. +

    Figure 11.1. IDMAP: Resolution of SIDs to UIDs.

    IDMAP: Resolution of SIDs to UIDs.

    + + The resolution of SIDs to UIDs is fundamental to correct operation of Samba. In both cases shown, if winbindd is not running, or cannot + be contacted, then only local SID/UID resolution is possible. See and + . +

    Figure 11.2. IDMAP: Resolution of UIDs to SIDs.

    IDMAP: Resolution of UIDs to SIDs.

    Important Notes About Security

    + The UNIX and SMB password encryption techniques seem similar on the surface. This + similarity is, however, only skin deep. The UNIX scheme typically sends cleartext passwords over the network when logging in. This is bad. The SMB encryption scheme never sends the cleartext password over the network but it does store the 16 byte hashed values on disk. This is also bad. Why? Because the 16 byte hashed values - are a "password equivalent". You cannot derive the user's password from them, but + are a “password equivalent.” You cannot derive the user's password from them, but they could potentially be used in a modified client to gain access to a server. This would require considerable technical knowledge on behalf of the attacker but - is perfectly possible. You should thus treat the data stored in whatever passdb - backend you use (smbpasswd file, ldap, mysql) as though it contained the cleartext - passwords of all your users. Its contents must be kept secret, and the file should + is perfectly possible. You should thus treat the datastored in whatever passdb + backend you use (smbpasswd file, LDAP, MYSQL) as though it contained the cleartext + passwords of all your users. Its contents must be kept secret and the file should be protected accordingly.

    - Ideally we would like a password scheme that involves neither plain text passwords - on the net nor on disk. Unfortunately this is not available as Samba is stuck with - having to be compatible with other SMB systems (WinNT, WfWg, Win95 etc). + Ideally, we would like a password scheme that involves neither plain text passwords + on the network nor on disk. Unfortunately, this is not available as Samba is stuck with + having to be compatible with other SMB systems (Windows NT, Windows for Workgroups, Windows 9x/Me).

    - Windows NT 4.0 Service pack 3 changed the default setting so that plaintext passwords + Windows NT 4.0 Service Pack 3 changed the default setting so plaintext passwords are disabled from being sent over the wire. This mandates either the use of encrypted - password support or edit the Windows NT registry to re-enable plaintext passwords. + password support or editing the Windows NT registry to re-enable plaintext passwords.

    - The following versions of MS Windows do not support full domain security protocols, + The following versions of Microsoft Windows do not support full domain security protocols, although they may log onto a domain environment: -

    • MS DOS Network client 3.0 with the basic network redirector installed

    • Windows 95 with the network redirector update installed

    • Windows 98 [se]

    • Windows Me

    Note

    - MS Windows XP Home does not have facilities to become a domain member and it can - not participate in domain logons. +

    • MS DOS Network client 3.0 with the basic network redirector installed.
    • Windows 95 with the network redirector update installed.
    • Windows 98 [Second Edition].
    • Windows Me.

    Note

    + MS Windows XP Home does not have facilities to become a Domain Member and it cannot participate in domain logons.

    The following versions of MS Windows fully support domain security protocols. -

    • Windows NT 3.5x

    • Windows NT 4.0

    • Windows 2000 Professional

    • Windows 200x Server/Advanced Server

    • Windows XP Professional

    - All current release of Microsoft SMB/CIFS clients support authentication via the - SMB Challenge/Response mechanism described here. Enabling clear text authentication +

    • Windows NT 3.5x.
    • Windows NT 4.0.
    • Windows 2000 Professional.
    • Windows 200x Server/Advanced Server.
    • Windows XP Professional.

    + All current releases of Microsoft SMB/CIFS clients support authentication via the + SMB Challenge/Response mechanism described here. Enabling cleartext authentication does not disable the ability of the client to participate in encrypted authentication. - Instead, it allows the client to negotiate either plain text _or_ encrypted password + Instead, it allows the client to negotiate either plain text or encrypted password handling.

    MS Windows clients will cache the encrypted password alone. Where plain text passwords - are re-enabled, through the appropriate registry change, the plain text password is NEVER + are re-enabled through the appropriate registry change, the plain text password is never cached. This means that in the event that a network connections should become disconnected - (broken) only the cached (encrypted) password will be sent to the resource server to - affect a auto-reconnect. If the resource server does not support encrypted passwords the - auto-reconnect will fail. USE OF ENCRYPTED PASSWORDS IS STRONGLY ADVISED. -

    Advantages of Encrypted Passwords

    • Plain text passwords are not passed across + (broken), only the cached (encrypted) password will be sent to the resource server to + effect an auto-reconnect. If the resource server does not support encrypted passwords the + auto-reconnect will fail. Use of encrypted passwords is strongly advised. +

      Advantages of Encrypted Passwords

      • Plaintext passwords are not passed across the network. Someone using a network sniffer cannot just - record passwords going to the SMB server.

      • Plain text passwords are not stored anywhere in - memory or on disk.

      • WinNT doesn't like talking to a server + record passwords going to the SMB server.

      • Plaintext passwords are not stored anywhere in + memory or on disk.

      • Windows NT does not like talking to a server that does not support encrypted passwords. It will refuse - to browse the server if the server is also in user level + to browse the server if the server is also in User Level security mode. It will insist on prompting the user for the password on each connection, which is very annoying. The only things you can do to stop this is to use SMB encryption.

      • Encrypted password support allows automatic share (resource) reconnects.

      • Encrypted passwords are essential for PDC/BDC - operation.

      Advantages of non-encrypted passwords

      • Plain text passwords are not kept - on disk, and are NOT cached in memory.

      • Uses same password file as other unix - services such as login and ftp

      • Use of other services (such as telnet and ftp) which - send plain text passwords over the net, so sending them for SMB - isn't such a big deal.

    Mapping User Identifiers between MS Windows and UNIX

    + operation.

    Advantages of Non-Encrypted Passwords

    • Plaintext passwords are not kept + on disk, and are not cached in memory.

    • Uses same password file as other UNIX + services such as Login and FTP.

    • Use of other services (such as Telnet and FTP) that + send plain text passwords over the network, so sending them for SMB + is not such a big deal.

    Mapping User Identifiers between MS Windows and UNIX

    Every operation in UNIX/Linux requires a user identifier (UID), just as in - MS Windows NT4 / 200x this requires a Security Identifier (SID). Samba provides + MS Windows NT4/200x this requires a Security Identifier (SID). Samba provides two means for mapping an MS Windows user to a UNIX/Linux UID.

    - Firstly, all Samba SAM (Security Account Manager database) accounts require + First, all Samba SAM (Security Account Manager database) accounts require a UNIX/Linux UID that the account will map to. As users are added to the account - information database, Samba will call the add user script + information database, Samba will call the add user script interface to add the account to the Samba host OS. In essence all accounts in the local SAM require a local user account.

    - The second way to affect Windows SID to UNIX UID mapping is via the - idmap uid, idmap gid parameters in smb.conf. + The second way to effect Windows SID to UNIX UID mapping is via the + idmap uid and idmap gid parameters in smb.conf. Please refer to the man page for information about these parameters. These parameters are essential when mapping users from a remote SAM server.

    Mapping Common UIDs/GIDs on Distributed Machines

    Samba-3 has a special facility that makes it possible to maintain identical UIDs and GIDs on all servers in a distributed network. A distributed network is one where there exists - a PDC, one or more BDCs and/or one or more domain member servers. Why is this important? - This is important if files are being shared over more than one protocol (eg: NFS) and where + a PDC, one or more BDCs and/or one or more Domain Member servers. Why is this important? + This is important if files are being shared over more than one protocol (e.g., NFS) and where users are copying files across UNIX/Linux systems using tools such as rsync.

    The special facility is enabled using a parameter called idmap backend. - The default setting for this parameter is an empty string. Administrators should NOT set this - parameter except when an LDAP based passdb backend is in use. An example of use is: + The default setting for this parameter is an empty string. Technically it is possible to use + an LDAP based idmap backend for UIDs and GIDs, but it makes most sense when this is done for + network configurations that also use LDAP for the SAM backend. A sample use is shown in + .

    -

    Example 11.1. 

    [global]
    idmap backend = ldapsam://ldap-server.quenya.org:636

    -

    Account Management Tools

    -Samba provides two (2) tools for management of User and machine accounts. These tools are + +

    Example 11.1. Example configuration with the LDAP idmap backend

    [global]
    idmap backend = ldapsam:ldap://ldap-server.quenya.org:636
    idmap backend = ldapsam:ldaps://ldap-server.quenya.org

    +

    + A network administrator who wants to make significant use of LDAP backends will sooner or later be + exposed to the excellent work done by PADL Software. PADL http://www.padl.com have + produced and released to open source an array of tools that might be of interest. These tools include: +

    • + nss_ldap: An LDAP Name Service Switch module to provide native + name service support for AIX, Linux, Solaris, and other operating systems. This tool + can be used for centralized storage and retrieval of UIDs/GIDs. +

    • + pam_ldap: A PAM module that provides LDAP integration for UNIX/Linux + system access authentication. +

    • + idmap_ad: An IDMAP backend that supports the Microsoft Services for + UNIX RFC 2307 schema available from their web + site. +

    Account Management Tools

    + +Samba provides two tools for management of user and machine accounts. These tools are called smbpasswd and pdbedit. A third tool is under -development but is NOT expected to ship in time for Samba-3.0.0. The new tool will be a TCL/TK -GUI tool that looks much like the MS Windows NT4 Domain User Manager - hopefully this will +development but is not expected to ship in time for Samba-3.0.0. The new tool will be a TCL/TK +GUI tool that looks much like the MS Windows NT4 Domain User Manager. Hopefully this will be announced in time for the Samba-3.0.1 release. -

    The smbpasswd Command

    - The smbpasswd utility is a utility similar to the passwd - or yppasswd programs. It maintains the two 32 byte password +

    The smbpasswd Command

    + The smbpasswd utility is similar to the passwd + or yppasswd programs. It maintains the two 32 byte password fields in the passdb backend.

    smbpasswd works in a client-server mode where it contacts the - local smbd to change the user's password on its behalf. This has enormous benefits - as follows: + local smbd to change the user's password on its behalf. This has enormous benefits.

    smbpasswd has the capability to change passwords on Windows NT servers (this only works when the request is sent to the NT Primary Domain Controller if changing an NT Domain user's password).

    smbpasswd can be used to: -

    • add user or machine accounts

    • delete user or machine accounts

    • enable user or machine accounts

    • disable user or machine accounts

    • set to NULL user passwords

    • manage interdomain trust accounts

    + + + +

    • add user or machine accounts.
    • delete user or machine accounts.
    • enable user or machine accounts.
    • disable user or machine accounts.
    • set to NULL user passwords.
    • manage interdomain trust accounts.

    To run smbpasswd as a normal user just type:

     $ smbpasswd
     Old SMB password: secret
     

    - For secret type old value here - or hit return if - there was no old password + For secret, type old value here or press return if + there is no old password.

     New SMB Password: new secret
     Repeat New SMB Password: new secret
    @@ -3274,32 +3461,38 @@ be announced in time for the Samba-3.0.1 release.
     		If the old value does not match the current value stored for that user, or the two
     		new values do not match each other, then the password will not be changed.
     		

    - When invoked by an ordinary user it will only allow change of their own + When invoked by an ordinary user, the command will only allow the user to change his or her own SMB password.

    - When run by root smbpasswd may take an optional argument, specifying - the user name whose SMB password you wish to change. When run as root, smbpasswd + When run by root, smbpasswd may take an optional argument specifying + the user name whose SMB password you wish to change. When run as root, smbpasswd does not prompt for or check the old password value, thus allowing root to set passwords for users who have forgotten their passwords.

    smbpasswd is designed to work in the way familiar to UNIX users who use the passwd or yppasswd commands. - While designed for administrative use, this tool provides essential user level + While designed for administrative use, this tool provides essential User Level password change capabilities.

    - For more details on using smbpasswd refer to the man page (the + For more details on using smbpasswd, refer to the man page (the definitive reference). -

    The pdbedit Command

    +

    The pdbedit Command

    + pdbedit is a tool that can be used only by root. It is used to manage the passdb backend. pdbedit can be used to: -

    • add, remove or modify user accounts

    • listing user accounts

    • migrate user accounts

    + + + +

    • add, remove or modify user accounts.
    • list user accounts.
    • migrate user accounts.

    + The pdbedit tool is the only one that can manage the account security and policy settings. It is capable of all operations that smbpasswd can do as well as a super set of them.

    + One particularly important purpose of the pdbedit is to allow the migration of account information from one passdb backend to another. See the - XML password backend section of this chapter. + password backend section of this chapter.

    The following is an example of the user account information that is stored in a tdbsam password backend. This listing was produced by running: @@ -3326,12 +3519,13 @@ Password last set: Sat, 14 Dec 2002 14:37:03 GMT Password can change: Sat, 14 Dec 2002 14:37:03 GMT Password must change: Mon, 18 Jan 2038 20:14:07 GMT

    + The pdbedit tool allows migration of authentication (account) databases from one backend to another. For example: To migrate accounts from an old smbpasswd database to a tdbsam backend:

    1. - Set the passdb backend = tdbsam, smbpasswd. + Set the passdb backend = tdbsam, smbpasswd.

    2. Execute:

      @@ -3340,7 +3534,7 @@ Password must change: Mon, 18 Jan 2038 20:14:07 GMT
       			

    3. Now remove the smbpasswd from the passdb backend configuration in smb.conf. -

    Password Backends

    +

    Password Backends

    Samba offers the greatest flexibility in backend account database design of any SMB/CIFS server technology available today. The flexibility is immediately obvious as one begins to explore this capability. @@ -3348,92 +3542,95 @@ capability. It is possible to specify not only multiple different password backends, but even multiple backends of the same type. For example, to use two different tdbsam databases:

    -

    passdb backend = tdbsam:/etc/samba/passdb.tdb, tdbsam:/etc/samba/old-passdb.tdb

    -

    Plain Text

    - Older versions of Samba retrieved user information from the unix user database +

    passdb backend = tdbsam:/etc/samba/passdb.tdb \
    tdbsam:/etc/samba/old-passdb.tdb

    +

    Plaintext

    + Older versions of Samba retrieved user information from the UNIX user database and eventually some other fields from the file /etc/samba/smbpasswd or /etc/smbpasswd. When password encryption is disabled, no SMB specific data is stored at all. Instead all operations are conducted via the way that the Samba host OS will access its /etc/passwd database. - eg: On Linux systems that is done via PAM. -

    smbpasswd - Encrypted Password Database

    - Traditionally, when configuring encrypt passwords = yes in Samba's smb.conf file, user account + Linux systems For example, all operations are done via PAM. +

    smbpasswd Encrypted Password Database

    + + Traditionally, when configuring encrypt passwords = yes in Samba's smb.conf file, user account information such as username, LM/NT password hashes, password change times, and account - flags have been stored in the smbpasswd(5) file. There are several - disadvantages to this approach for sites with very large numbers of users (counted + flags have been stored in the smbpasswd(5) file. There are several + disadvantages to this approach for sites with large numbers of users (counted in the thousands).

    • - The first is that all lookups must be performed sequentially. Given that + The first problem is that all lookups must be performed sequentially. Given that there are approximately two lookups per domain logon (one for a normal session connection such as when mapping a network drive or printer), this - is a performance bottleneck for large sites. What is needed is an indexed approach - such as is used in databases. + is a performance bottleneck for large sites. What is needed is an indexed approach + such as used in databases.

    • The second problem is that administrators who desire to replicate a smbpasswd file to more than one Samba server were left to use external tools such as rsync(1) and ssh(1) and wrote custom, in-house scripts.

    • - And finally, the amount of information which is stored in an smbpasswd entry leaves + Finally, the amount of information that is stored in an smbpasswd entry leaves no room for additional attributes such as a home directory, password expiration time, or even a Relative Identifier (RID).

    As a result of these deficiencies, a more robust means of storing user attributes - used by smbd was developed. The API which defines access to user accounts + used by smbd was developed. The API which defines access to user accounts is commonly referred to as the samdb interface (previously this was called the passdb API, and is still so named in the Samba CVS trees).

    Samba provides an enhanced set of passdb backends that overcome the deficiencies - of the smbpasswd plain text database. These are tdbsam, ldapsam, and xmlsam. - Of these ldapsam will be of most interest to large corporate or enterprise sites. -

    tdbsam

    Samba can store user and machine account data in a "TDB" (Trivial Database). - Using this backend doesn't require any additional configuration. This backend is + of the smbpasswd plain text database. These are tdbsam, ldapsam and xmlsam. + Of these, ldapsam will be of most interest to large corporate or enterprise sites. +

    tdbsam

    + + Samba can store user and machine account data in a “TDB” (Trivial Database). + Using this backend does not require any additional configuration. This backend is recommended for new installations that do not require LDAP.

    - As a general guide the Samba-Team does NOT recommend using the tdbsam backend for sites + As a general guide, the Samba Team does not recommend using the tdbsam backend for sites that have 250 or more users. Additionally, tdbsam is not capable of scaling for use - in sites that require PDB/BDC implementations that requires replication of the account + in sites that require PDB/BDC implementations that require replication of the account database. Clearly, for reason of scalability, the use of ldapsam should be encouraged. -

    ldapsam

    +

    + The recommendation of a 250 user limit is purely based on the notion that this + would generally involve a site that has routed networks, possibly spread across + more than one physical location. The Samba Team has not at this time established + the performance based scalability limits of the tdbsam architecture. +

    ldapsam

    + There are a few points to stress that the ldapsam does not provide. The LDAP - support referred to in the this documentation does not include: + support referred to in this documentation does not include:

    • A means of retrieving user account information from an Windows 200x Active Directory server.

    • A means of replacing /etc/passwd.

    - The second item can be accomplished by using LDAP NSS and PAM modules. LGPL - versions of these libraries can be obtained from PADL Software - (http://www.padl.com/). More - information about the configuration of these packages may be found at "LDAP, - System Administration; Gerald Carter, O'Reilly; Chapter 6: Replacing NIS". - Refer to - http://safari.oreilly.com/?XmlId=1-56592-491-6 for those who might wish to know - more about configuration and administration of an OpenLDAP server. -

    Note

    - This section is outdated for Samba-3 schema. Samba-3 introduces a new schema - that has not been documented at the time of this publication. -

    + The second item can be accomplished by using LDAP NSS and PAM modules. LGPL + versions of these libraries can be obtained from + PADL Software. + More information about the configuration of these packages may be found at + + LDAP, System Administration; Gerald Carter by O'Reilly; Chapter 6: Replacing NIS." +

    This document describes how to use an LDAP directory for storing Samba user - account information traditionally stored in the smbpasswd(5) file. It is + account information traditionally stored in the smbpasswd(5) file. It is assumed that the reader already has a basic understanding of LDAP concepts - and has a working directory server already installed. For more information - on LDAP architectures and Directories, please refer to the following sites. -

    - Two additional Samba resources which may prove to be helpful are -

    • The Samba-PDC-LDAP-HOWTO - maintained by Ignacio Coupeau.

    • The NT migration scripts from IDEALX that are + and has a working directory server already installed. For more information + on LDAP architectures and directories, please refer to the following sites: +

      • OpenLDAP

      • Sun iPlanet Directory Server

      + Two additional Samba resources which may prove to be helpful are: +

      • The Samba-PDC-LDAP-HOWTO + maintained by Ignacio Coupeau.

      • The NT migration scripts from IDEALX that are geared to manage users and group in such a Samba-LDAP Domain Controller configuration. -

      Supported LDAP Servers

      +

    Supported LDAP Servers

    The LDAP ldapsam code has been developed and tested using the OpenLDAP 2.0 and 2.1 server and - client libraries. The same code should work with Netscape's Directory Server and client SDK. + client libraries. The same code should work with Netscape's Directory Server and client SDK. However, there are bound to be compile errors and bugs. These should not be hard to fix. - Please submit fixes via Bug reporting facility. -

    Schema and Relationship to the RFC 2307 posixAccount

    - Samba 3.0 includes the necessary schema file for OpenLDAP 2.0 in - examples/LDAP/samba.schema. The sambaSamAccount objectclass is given here: + Please submit fixes via the process outlined in . +

    Schema and Relationship to the RFC 2307 posixAccount

    + Samba-3.0 includes the necessary schema file for OpenLDAP 2.0 in + examples/LDAP/samba.schema. The sambaSamAccount objectclass is given here:

    -objectclass ( 1.3.6.1.4.1.7165.2.2.6 NAME 'sambaSamAccount' SUP top AUXILIARY
    -    DESC 'Samba 3.0 Auxiliary SAM Account'
    +objectclass (1.3.6.1.4.1.7165.2.2.6 NAME 'sambaSamAccount' SUP top AUXILIARY
    +    DESC 'Samba-3.0 Auxiliary SAM Account'
         MUST ( uid $ sambaSID )
         MAY  ( cn $ sambaLMPassword $ sambaNTPassword $ sambaPwdLastSet $
               sambaLogonTime $ sambaLogoffTime $ sambaKickoffTime $
    @@ -3444,41 +3641,41 @@ objectclass ( 1.3.6.1.4.1.7165.2.2.6 NAME 'sambaSamAccount' SUP top AUXILIARY
     

    The samba.schema file has been formatted for OpenLDAP 2.0/2.1. - The OID's are owned by the Samba Team and as such is legal to be openly published. - If you translate the schema to be used with Netscape DS, please - submit the modified schema file as a patch to - jerry@samba.org. + The Samba Team owns the OID space used by the above schema and recommends its use. + If you translate the schema to be used with Netscape DS, please submit the modified + schema file as a patch to jerry@samba.org.

    - Just as the smbpasswd file is meant to store information which supplements a + Just as the smbpasswd file is meant to store information that provides information additional to a user's /etc/passwd entry, so is the sambaSamAccount object - meant to supplement the UNIX user account information. A sambaSamAccount is a - STRUCTURAL objectclass so it can be stored individually - in the directory. However, there are several fields (e.g. uid) which overlap - with the posixAccount objectclass outlined in RFC2307. This is by design. + meant to supplement the UNIX user account information. A sambaSamAccount is a + AUXILIARY objectclass so it can be used to augment existing + user account information in the LDAP directory, thus providing information needed + for Samba account handling. However, there are several fields (e.g., uid) that overlap + with the posixAccount objectclass outlined in RFC2307. This is by design.

    In order to store all user account information (UNIX and Samba) in the directory, it is necessary to use the sambaSamAccount and posixAccount objectclasses in - combination. However, smbd will still obtain the user's UNIX account - information via the standard C library calls (e.g. getpwnam(), et. al.). + combination. However, smbd will still obtain the user's UNIX account + information via the standard C library calls (e.g., getpwnam(), et al). This means that the Samba server must also have the LDAP NSS library installed - and functioning correctly. This division of information makes it possible to + and functioning correctly. This division of information makes it possible to store all Samba account information in LDAP, but still maintain UNIX account information in NIS while the network is transitioning to a full LDAP infrastructure. -

    OpenLDAP configuration

    +

    OpenLDAP Configuration

    To include support for the sambaSamAccount object in an OpenLDAP directory server, first copy the samba.schema file to slapd's configuration directory. The samba.schema file can be found in the directory examples/LDAP - in the samba source distribution. + in the Samba source distribution.

     root# cp samba.schema /etc/openldap/schema/
     

    Next, include the samba.schema file in slapd.conf. - The sambaSamAccount object contains two attributes which depend upon other schema - files. The 'uid' attribute is defined in cosine.schema and - the 'displayName' attribute is defined in the inetorgperson.schema - file. Both of these must be included before the samba.schema file. + The sambaSamAccount object contains two attributes that depend on other schema + files. The uid attribute is defined in cosine.schema and + the displayName attribute is defined in the inetorgperson.schema + file. Both of these must be included before the samba.schema file.

     ## /etc/openldap/slapd.conf
    @@ -3495,8 +3692,8 @@ include            /etc/openldap/schema/nis.schema
     

    It is recommended that you maintain some indices on some of the most useful attributes, - like in the following example, to speed up searches made on sambaSamAccount objectclasses - (and possibly posixAccount and posixGroup as well). + as in the following example, to speed up searches made on sambaSamAccount objectclasses + (and possibly posixAccount and posixGroup as well):

     # Indices to maintain
    @@ -3533,10 +3730,10 @@ index   default               sub
     

     root# /etc/init.d/slapd restart
     

    -

    Initialise the LDAP database

    +

    Initialize the LDAP Database

    Before you can add accounts to the LDAP database you must create the account containers that they will be stored in. The following LDIF file should be modified to match your - needs (ie: Your DNS entries, etc.). + needs (DNS entries, and so on):

     # Organization for Samba Base
    @@ -3566,6 +3763,34 @@ objectclass: top
     objectclass: organizationalRole
     objectclass: simpleSecurityObject
     userPassword: {SSHA}c3ZM9tBaBo9autm1dL3waDS21+JSfQVz
    +
    +# Setting up container for groups
    +dn: ou=Groups,dc=quenya,dc=org
    +objectclass: top
    +objectclass: organizationalUnit
    +ou: People
    +
    +# Setting up admin handle for Groups OU
    +dn: cn=admin,ou=Groups,dc=quenya,dc=org
    +cn: admin
    +objectclass: top
    +objectclass: organizationalRole
    +objectclass: simpleSecurityObject
    +userPassword: {SSHA}c3ZM9tBaBo9autm1dL3waDS21+JSfQVz
    +
    +# Setting up container for computers
    +dn: ou=Computers,dc=quenya,dc=org
    +objectclass: top
    +objectclass: organizationalUnit
    +ou: People
    +
    +# Setting up admin handle for Computers OU
    +dn: cn=admin,ou=Computers,dc=quenya,dc=org
    +cn: admin
    +objectclass: top
    +objectclass: organizationalRole
    +objectclass: simpleSecurityObject
    +userPassword: {SSHA}c3ZM9tBaBo9autm1dL3waDS21+JSfQVz
     

    The userPassword shown above should be generated using slappasswd. @@ -3577,7 +3802,7 @@ userPassword: {SSHA}c3ZM9tBaBo9autm1dL3waDS21+JSfQVz $ slapadd -v -l initldap.dif

    - Do not forget to secure your LDAP server with an adequate access control list, + Do not forget to secure your LDAP server with an adequate access control list as well as an admin password.

    Note

    Before Samba can access the LDAP server you need to store the LDAP admin password @@ -3585,124 +3810,142 @@ userPassword: {SSHA}c3ZM9tBaBo9autm1dL3waDS21+JSfQVz

     root# smbpasswd -w secret
     

    -

    Configuring Samba

    +

    Configuring Samba

    The following parameters are available in smb.conf only if your - version of samba was built with LDAP support. Samba automatically builds with LDAP support if the + version of Samba was built with LDAP support. Samba automatically builds with LDAP support if the LDAP libraries are found.

    LDAP related smb.conf options: - passdb backend = ldapsam:url, - ldap ssl, - ldap admin dn, - ldap suffix, - ldap filter, - ldap machine suffix, - ldap user suffix, - ldap delete dn, - ldap passwd sync, - ldap trust ids. + passdb backend = ldapsam:url, + ldap admin dn, + ldap delete dn, + ldap filter, + ldap group suffix, + ldap idmap suffix, + ldap machine suffix, + ldap passwd sync, + ldap ssl, + ldap suffix, + ldap user suffix,

    These are described in the smb.conf man - page and so will not be repeated here. However, a sample smb.conf file for - use with an LDAP directory could appear as + page and so will not be repeated here. However, a sample smb.conf file for + use with an LDAP directory could appear as shown in .

    -

    Example 11.2. Configuration with LDAP

    [global]
    security = user
    encrypt passwords = yes
    netbios name = TASHTEGO
    workgroup = NARNIA
    # ldap related parameters
    # define the DN to use when binding to the directory servers
    # The password for this DN is not stored in smb.conf. Rather it
    # must be set by using 'smbpasswd -w secretpw' to store the
    # passphrase in the secrets.tdb file. If the "ldap admin dn" values
    # change, this password will need to be reset.
    ldap admin dn = "cn=Samba Manager,ou=people,dc=samba,dc=org"
    # Define the SSL option when connecting to the directory
    # ('off', 'start tls', or 'on' (default))
    ldap ssl = start tls
    # syntax: passdb backend = ldapsam:ldap://server-name[:port]
    passdb backend = ldapsam:ldap://funball.samba.org
    # smbpasswd -x delete the entire dn-entry
    ldap delete dn = no
    # the machine and user suffix added to the base suffix
    # wrote WITHOUT quotes. NULL suffixes by default
    ldap user suffix = ou=People
    ldap machine suffix = ou=Systems
    # Trust unix account information in LDAP
    # (see the smb.conf manpage for details)
    ldap trust ids = Yes
    # specify the base DN to use when searching the directory
    ldap suffix = "ou=people,dc=samba,dc=org"
    # generally the default ldap search filter is ok
    ldap filter = "(&(uid=%u)(objectclass=sambaSamAccount))"

    -

    Accounts and Groups management

    - As users accounts are managed through the sambaSamAccount objectclass, you should +

    Example 11.2. Configuration with LDAP

    [global]
    security = user
    encrypt passwords = yes
    netbios name = MORIA
    workgroup = NOLDOR
    # ldap related parameters
    # define the DN to use when binding to the directory servers
    # The password for this DN is not stored in smb.conf. Rather it
    # must be set by using 'smbpasswd -w secretpw' to store the
    # passphrase in the secrets.tdb file. If the "ldap admin dn" values
    # change, this password will need to be reset.
    ldap admin dn = "cn=Manager,ou=People,dc=quenya,dc=org"
    # Define the SSL option when connecting to the directory
    # ('off', 'start tls', or 'on' (default))
    ldap ssl = start tls
    # syntax: passdb backend = ldapsam:ldap://server-name[:port]
    passdb backend = ldapsam:ldap://frodo.quenya.org
    # smbpasswd -x delete the entire dn-entry
    ldap delete dn = no
    # the machine and user suffix added to the base suffix
    # wrote WITHOUT quotes. NULL suffixes by default
    ldap user suffix = ou=People
    ldap group suffix = ou=Groups
    ldap machine suffix = ou=Computers
    # Trust UNIX account information in LDAP
    # (see the smb.conf manpage for details)
    # specify the base DN to use when searching the directory
    ldap suffix = ou=People,dc=quenya,dc=org
    # generally the default ldap search filter is ok
    ldap filter = (&(uid=%u)(objectclass=sambaSamAccount))

    +

    Accounts and Groups Management

    + + + + As user accounts are managed through the sambaSamAccount objectclass, you should modify your existing administration tools to deal with sambaSamAccount attributes.

    - Machines accounts are managed with the sambaSamAccount objectclass, just - like users accounts. However, it's up to you to store those accounts - in a different tree of your LDAP namespace: you should use - "ou=Groups,dc=quenya,dc=org" to store groups and - "ou=People,dc=quenya,dc=org" to store users. Just configure your - NSS and PAM accordingly (usually, in the /etc/ldap.conf configuration - file). + Machine accounts are managed with the sambaSamAccount objectclass, just + like users accounts. However, it is up to you to store those accounts + in a different tree of your LDAP namespace. You should use + “ou=Groups,dc=quenya,dc=org” to store groups and + “ou=People,dc=quenya,dc=org” to store users. Just configure your + NSS and PAM accordingly (usually, in the /etc/openldap/sldap.conf + configuration file).

    - In Samba release 3.0, the group management system is based on POSIX + In Samba-3, the group management system is based on POSIX groups. This means that Samba makes use of the posixGroup objectclass. For now, there is no NT-like group system management (global and local - groups). -

    Security and sambaSamAccount

    + groups). Samba-3 knows only about Domain Groups + and, unlike MS Windows 2000 and Active Directory, Samba-3 does not + support nested groups. +

    Security and sambaSamAccount

    There are two important points to remember when discussing the security of sambaSamAccount entries in the directory.

    • Never retrieve the lmPassword or ntPassword attribute values over an unencrypted LDAP session.

    • Never allow non-admin users to view the lmPassword or ntPassword attribute values.

    - These password hashes are clear text equivalents and can be used to impersonate - the user without deriving the original clear text strings. For more information + These password hashes are cleartext equivalents and can be used to impersonate + the user without deriving the original cleartext strings. For more information on the details of LM/NT password hashes, refer to the - Account Information Database section of this chapter. + section of this chapter.

    - To remedy the first security issue, the ldap ssl smb.conf parameter defaults - to require an encrypted session (ldap ssl = on) using + To remedy the first security issue, the ldap ssl smb.conf parameter defaults + to require an encrypted session (ldap ssl = on) using the default port of 636 - when contacting the directory server. When using an OpenLDAP server, it + when contacting the directory server. When using an OpenLDAP server, it is possible to use the use the StartTLS LDAP extended operation in the place of - LDAPS. In either case, you are strongly discouraged to disable this security - (ldap ssl = off). + LDAPS. In either case, you are strongly discouraged to disable this security + (ldap ssl = off).

    Note that the LDAPS protocol is deprecated in favor of the LDAPv3 StartTLS - extended operation. However, the OpenLDAP library still provides support for + extended operation. However, the OpenLDAP library still provides support for the older method of securing communication between clients and servers.

    The second security precaution is to prevent non-administrative users from - harvesting password hashes from the directory. This can be done using the + harvesting password hashes from the directory. This can be done using the following ACL in slapd.conf:

     ## allow the "ldap admin dn" access, but deny everyone else
     access to attrs=lmPassword,ntPassword
    -     by dn="cn=Samba Admin,ou=people,dc=quenya,dc=org" write
    +     by dn="cn=Samba Admin,ou=People,dc=quenya,dc=org" write
          by * none
     

    -

    LDAP special attributes for sambaSamAccounts

    - The sambaSamAccount objectclass is composed of the following attributes: +

    LDAP Special Attributes for sambaSamAccounts

    + The sambaSamAccount objectclass is composed of the attributes shown in , and .

    -

    Table 11.1. Attributes in the sambaSamAccount objectclass (LDAP)

    sambaLMPasswordthe LANMAN password 16-byte hash stored as a character -representation of a hexadecimal string.
    sambaNTPasswordthe NT password hash 16-byte stored as a character +

    Table 11.1. Attributes in the sambaSamAccount objectclass (LDAP) Part A

    sambaLMPasswordThe LANMAN password 16-byte hash stored as a character + representation of a hexadecimal string.
    sambaNTPasswordThe NT password hash 16-byte stored as a character representation of a hexadecimal string.
    sambaPwdLastSetThe integer time in seconds since 1970 when the sambaLMPassword and sambaNTPassword attributes were last set. -
    sambaAcctFlagsstring of 11 characters surrounded by square brackets [] - representing account flags such as U (user), W(workstation), X(no password expiration), - I(Domain trust account), H(Home dir required), S(Server trust account), - and D(disabled).
    sambaLogonTimeInteger value currently unused
    sambaLogoffTimeInteger value currently unused
    sambaKickoffTimeInteger value currently unused
    sambaPwdCanChangeInteger value currently unused
    sambaPwdMustChangeInteger value currently unused
    sambaHomeDrivespecifies the drive letter to which to map the - UNC path specified by sambaHomePath. The drive letter must be specified in the form "X:" - where X is the letter of the drive to map. Refer to the "logon drive" parameter in the +
    sambaAcctFlagsString of 11 characters surrounded by square brackets [] + representing account flags such as U (user), W (workstation), X (no password expiration), + I (Domain trust account), H (Home dir required), S (Server trust account), + and D (disabled).
    sambaLogonTimeInteger value currently unused
    sambaLogoffTimeInteger value currently unused
    sambaKickoffTimeSpecifies the time (UNIX time format) when the user + will be locked down and cannot login any longer. If this attribute is ommited, then the account will never expire. + If you use this attribute together with `shadowExpire' of the `shadowAccount' objectClass, will enable accounts to + expire completly on an exact date.
    sambaPwdCanChangeSpecifies the time (UNIX time format) from which on the user is allowed to + change his password. If attribute is not set, the user will be free to change his password whenever he wants.
    sambaPwdMustChangeSpecifies the time (UNIX time format) since when the user is + forced to change his password. If this value is set to `0', the user will have to change his password at first login. + If this attribute is not set, then the password will never expire.
    sambaHomeDriveSpecifies the drive letter to which to map the + UNC path specified by sambaHomePath. The drive letter must be specified in the form “X:” + where X is the letter of the drive to map. Refer to the “logon drive” parameter in the smb.conf(5) man page for more information.
    sambaLogonScriptThe sambaLogonScript property specifies the path of the user's logon script, .CMD, .EXE, or .BAT file. The string can be null. The path - is relative to the netlogon share. Refer to the logon script parameter in the - smb.conf man page for more information.
    sambaProfilePathspecifies a path to the user's profile. - This value can be a null string, a local absolute path, or a UNC path. Refer to the - logon path parameter in the smb.conf man page for more information.
    sambaHomePathThe sambaHomePath property specifies the path of -the home directory for the user. The string can be null. If sambaHomeDrive is set and specifies -a drive letter, sambaHomePath should be a UNC path. The path must be a network -UNC path of the form \\server\share\directory. This value can be a null string. -Refer to the logon home parameter in the smb.conf man page for more information. -
    sambaUserWorkstationscharacter string value currently unused. -
    sambaSIDThe security identifier(SID) of the user. The windows equivalent of unix uid's.
    sambaPrimaryGroupSIDthe relative identifier (RID) of the primary group - of the user.
    sambaDomainNamedomain the user is part of.

    + is relative to the netlogon share. Refer to the logon script parameter in the + smb.conf man page for more information.

    sambaProfilePathSpecifies a path to the user's profile. + This value can be a null string, a local absolute path, or a UNC path. Refer to the + logon path parameter in the smb.conf man page for more information.
    sambaHomePathThe sambaHomePath property specifies the path of + the home directory for the user. The string can be null. If sambaHomeDrive is set and specifies + a drive letter, sambaHomePath should be a UNC path. The path must be a network + UNC path of the form \\server\share\directory. This value can be a null string. + Refer to the logon home parameter in the smb.conf man page for more information. +

    +

    +

    Table 11.2. Attributes in the sambaSamAccount objectclass (LDAP) Part B

    sambaUserWorkstationsHere you can give a comma-seperated list of machines + on which the user is allowed to login. You may observe problems when you try to connect to an Samba Domain Member. + Bacause Domain Members are not in this list, the Domain Controllers will reject them. Where this attribute is ommited, + the default implies no restrictions. +
    sambaSIDThe security identifier(SID) of the user. + The Windows equivalent of UNIX UIDs.
    sambaPrimaryGroupSIDThe Security IDentifier (SID) of the primary group + of the user.
    sambaDomainNameDomain the user is part of.

    The majority of these parameters are only used when Samba is acting as a PDC of - a domain (refer to the Samba as a primary domain controller chapter for details on + a domain (refer to , for details on how to configure Samba as a Primary Domain Controller). The following four attributes are only stored with the sambaSamAccount entry if the values are non-default values: -

    • sambaHomePath

    • sambaLogonScript

    • sambaProfilePath

    • sambaHomeDrive

    +

    • sambaHomePath
    • sambaLogonScript
    • sambaProfilePath
    • sambaHomeDrive

    These attributes are only stored with the sambaSamAccount entry if - the values are non-default values. For example, assume TASHTEGO has now been - configured as a PDC and that logon home = \\%L\%u was defined in - its smb.conf file. When a user named "becky" logons to the domain, - the logon home string is expanded to \\TASHTEGO\becky. - If the smbHome attribute exists in the entry "uid=becky,ou=people,dc=samba,dc=org", - this value is used. However, if this attribute does not exist, then the value - of the logon home parameter is used in its place. Samba + the values are non-default values. For example, assume MORIA has now been + configured as a PDC and that logon home = \\%L\%u was defined in + its smb.conf file. When a user named “becky” logons to the domain, + the logon home string is expanded to \\MORIA\becky. + If the smbHome attribute exists in the entry “uid=becky,ou=People,dc=samba,dc=org”, + this value is used. However, if this attribute does not exist, then the value + of the logon home parameter is used in its place. Samba will only write the attribute value to the directory entry if the value is - something other than the default (e.g. \\MOBY\becky). -

    Example LDIF Entries for a sambaSamAccount

    - The following is a working LDIF with the inclusion of the posixAccount objectclass: + something other than the default (e.g., \\MOBY\becky). +

    Example LDIF Entries for a sambaSamAccount

    + The following is a working LDIF that demonstrates the use of the SambaSamAccount objectclass:

    -	dn: uid=guest2, ou=people,dc=quenya,dc=org
    -	sambaNTPassword: 878D8014606CDA29677A44EFA1353FC7
    +	dn: uid=guest2, ou=People,dc=quenya,dc=org
    +	sambaLMPassword: 878D8014606CDA29677A44EFA1353FC7
     	sambaPwdMustChange: 2147483647
     	sambaPrimaryGroupSID: S-1-5-21-2447931902-1787058256-3961074038-513
     	sambaNTPassword: 552902031BEDE9EFAAD3B435B51404EE
    @@ -3721,7 +3964,7 @@ Refer to the logon home parameter in the 
    -	dn: uid=gcarter, ou=people,dc=quenya,dc=org
    +	dn: uid=gcarter, ou=People,dc=quenya,dc=org
     	sambaLogonTime: 0
     	displayName: Gerald Carter
     	sambaLMPassword: 552902031BEDE9EFAAD3B435B51404EE
    @@ -3739,206 +3982,258 @@ Refer to the logon home parameter in the 

    Password synchronisation

    - Since version 3.0 samba can update the non-samba (LDAP) password stored with an account. When - using pam_ldap, this allows changing both unix and windows passwords at once. -

    The ldap passwd sync options can have the following values:

    yes

    When the user changes his password, update - ntPassword, lmPassword - and the password fields.

    no

    Only update ntPassword and lmPassword.

    only

    Only update the LDAP password and let the LDAP server worry about the other fields. This option is only available on some LDAP servers. [3]

    More information can be found in the smb.conf manpage. -

    MySQL

    - Every so often someone will come along with a great new idea. Storing of user accounts in an +

    Password Synchronization

    + Samba-3 and later can update the non-samba (LDAP) password stored with an account. When + using pam_ldap, this allows changing both UNIX and Windows passwords at once. +

    The ldap passwd sync options can have the values shown in + .

    Table 11.3. Possible ldap passwd sync values

    ValueDescription
    yes

    When the user changes his password, update + ntPassword, lmPassword + and the password fields.

    no

    Only update ntPassword and lmPassword.

    only

    Only update the LDAP password and let the LDAP server worry about the other fields. + This option is only available on some LDAP servers. Only when the LDAP server + supports LDAP_EXOP_X_MODIFY_PASSWD.

    More information can be found in the smb.conf manpage.

    MySQL

    + + Every so often someone will come along with a great new idea. Storing user accounts in a SQL backend is one of them. Those who want to do this are in the best position to know what the - specific benefits are to them. This may sound like a cop-out, but in truth we can not attempt - to document every nitty little detail why certain things of marginal utility to the bulk of + specific benefits are to them. This may sound like a cop-out, but in truth we cannot attempt + to document every little detail why certain things of marginal utility to the bulk of Samba users might make sense to the rest. In any case, the following instructions should help the determined SQL user to implement a working system. -

    Creating the database

    - You either can set up your own table and specify the field names to pdb_mysql (see below +

    Creating the Database

    + You can set up your own table and specify the field names to pdb_mysql (see below for the column names) or use the default table. The file examples/pdb/mysql/mysql.dump - contains the correct queries to create the required tables. Use the command : + contains the correct queries to create the required tables. Use the command:

     $ mysql -uusername -hhostname -ppassword \
    -databasename < /path/to/samba/examples/pdb/mysql/mysql.dump
    +	databasename < /path/to/samba/examples/pdb/mysql/mysql.dump
     

    -

    Configuring

    This plugin lacks some good documentation, but here is some short info:

    Add a the following to the passdb backend variable in your smb.conf: -

    passdb backend = [other-plugins] mysql:identifier [other-plugins]

    -

    The identifier can be any string you like, as long as it doesn't collide with +

    Configuring

    This plugin lacks some good documentation, but here is some brief infoormation. Add the following to the + passdb backend variable in your smb.conf: +

    passdb backend = [other-plugins] mysql:identifier [other-plugins]

    +

    The identifier can be any string you like, as long as it does not collide with the identifiers of other plugins or other instances of pdb_mysql. If you - specify multiple pdb_mysql.so entries in passdb backend, you also need to - use different identifiers! -

    - Additional options can be given through the smb.conf file in the [global] section. + specify multiple pdb_mysql.so entries in passdb backend, you also need to + use different identifiers.

    -

    Table 11.2. Basic smb.conf options for MySQL passdb backend

    FieldContents
    mysql hosthost name, defaults to 'localhost'
    mysql password 
    mysql userdefaults to 'samba'
    mysql databasedefaults to 'samba'
    mysql portdefaults to 3306
    tableName of the table containing users

    -

    Warning

    - Since the password for the MySQL user is stored in the - smb.conf file, you should make the smb.conf file - readable only to the user that runs Samba This is considered a security - bug and will be fixed soon. -

    Names of the columns in this table (I've added column types those columns should have first):

    -

    Table 11.3. MySQL field names for MySQL passdb backend

    FieldTypeContents
    logon time columnint(9) 
    logoff time columnint(9) 
    kickoff time columnint(9) 
    pass last set time columnint(9) 
    pass can change time columnint(9) 
    pass must change time columnint(9) 
    username columnvarchar(255)unix username
    domain columnvarchar(255)NT domain user is part of
    nt username columnvarchar(255)NT username
    fullname columnvarchar(255)Full name of user
    home dir columnvarchar(255)UNIX homedir path
    dir drive columnvarchar(2)Directory drive path (eg: 'H:')
    logon script columnvarchar(255)Batch file to run on client side when logging on
    profile path columnvarchar(255)Path of profile
    acct desc columnvarchar(255)Some ASCII NT user data
    workstations columnvarchar(255)Workstations user can logon to (or NULL for all)
    unknown string columnvarchar(255)unknown string
    munged dial columnvarchar(255)?
    user sid columnvarchar(255)NT user SID
    group sid columnvarchar(255)NT group ID
    lanman pass columnvarchar(255)encrypted lanman password
    nt pass columnvarchar(255)encrypted nt passwd
    plain pass columnvarchar(255)plaintext password
    acct control columnint(9)nt user data
    unknown 3 columnint(9)unknown
    logon divs columnint(9)?
    hours len columnint(9)?
    unknown 5 columnint(9)unknown
    unknown 6 columnint(9)unknown

    + Additional options can be given through the smb.conf file in the [global] section. + Refer to . +

    Table 11.4. Basic smb.conf options for MySQL passdb backend

    FieldContents
    mysql hostHost name, defaults to `localhost'
    mysql password 
    mysql userDefaults to `samba'
    mysql databaseDefaults to `samba'
    mysql portDefaults to 3306
    tableName of the table containing the users

    Warning

    + Since the password for the MySQL user is stored in the smb.conf file, you should make the smb.conf file + readable only to the user who runs Samba. This is considered a security bug and will soon be fixed. +

    Names of the columns are given in . The default column names can be found in the example table dump. +

    +

    Table 11.5. MySQL field names for MySQL passdb backend

    FieldTypeContents
    logon time columnint(9)UNIX time stamp of last logon of user
    logoff time columnint(9)UNIX time stamp of last logoff of user
    kickoff time columnint(9)UNIX time stamp of moment user should be kicked off workstation (not enforced)
    pass last set time columnint(9)UNIX time stamp of moment password was last set
    pass can change time columnint(9)UNIX time stamp of moment from which password can be changed
    pass must change time columnint(9)UNIX time stamp of moment on which password must be changed
    username columnvarchar(255)UNIX username
    domain columnvarchar(255)NT domain user belongs to
    nt username columnvarchar(255)NT username
    fullname columnvarchar(255)Full name of user
    home dir columnvarchar(255)UNIX homedir path
    dir drive columnvarchar(2)Directory drive path (e.g., “H:”)
    logon script columnvarchar(255)Batch file to run on client side when logging on
    profile path columnvarchar(255)Path of profile
    acct desc columnvarchar(255)Some ASCII NT user data
    workstations columnvarchar(255)Workstations user can logon to (or NULL for all)
    unknown string columnvarchar(255)Unknown string
    munged dial columnvarchar(255)Unknown
    user sid columnvarchar(255)NT user SID
    group sid columnvarchar(255)NT group SID
    lanman pass columnvarchar(255)Encrypted lanman password
    nt pass columnvarchar(255)Encrypted nt passwd
    plain pass columnvarchar(255)Plaintext password
    acct ctrl columnint(9)NT user data
    unknown 3 columnint(9)Unknown
    logon divs columnint(9)Unknown
    hours len columnint(9)Unknown
    bad password count columnint(5)Number of failed password tries before disabling an account
    logon count columnint(5)Number of logon attempts
    unknown 6 columnint(9)Unknown

    - Eventually, you can put a colon (:) after the name of each column, which + You can put a colon (:) after the name of each column, which should specify the column to update when updating the table. You can also - specify nothing behind the colon - then the data from the field will not be - updated. -

    Using plaintext passwords or encrypted password

    - I strongly discourage the use of plaintext passwords, however, you can use them: + specify nothing behind the colon. Then the field data will not be updated. Setting a column name to NULL means the field should not be used. +

    An example configuration can be found in . +

    Example 11.3. Example configuration for the MySQL passdb backend

    [global]
    passdb backend = mysql:foo
    foo:mysql user = samba
    foo:mysql password = abmas
    foo:mysql database = samba
    # domain name is static and can't be changed
    foo:domain column = 'MYWORKGROUP':
    # The fullname column comes from several other columns
    foo:fullname column = CONCAT(firstname,' ',surname):
    # Samba should never write to the password columns
    foo:lanman pass column = lm_pass:
    foo:nt pass column = nt_pass:
    # The unknown 3 column is not stored
    foo:unknown 3 column = NULL

    Using Plaintext Passwords or Encrypted Password

    + + I strongly discourage the use of plaintext passwords, however, you can use them.

    If you would like to use plaintext passwords, set - 'identifier:lanman pass column' and 'identifier:nt pass column' to - 'NULL' (without the quotes) and 'identifier:plain pass column' to the + `identifier:lanman pass column' and `identifier:nt pass column' to + `NULL' (without the quotes) and `identifier:plain pass column' to the name of the column containing the plaintext passwords.

    If you use encrypted passwords, set the 'identifier:plain pass column' to 'NULL' (without the quotes). This is the default. -

    Getting non-column data from the table

    - It is possible to have not all data in the database and making some 'constant'. +

    Getting Non-Column Data from the Table

    + It is possible to have not all data in the database by making some `constant'.

    - For example, you can set 'identifier:fullname column' to : - CONCAT(First_name,' ',Sur_name) + For example, you can set `identifier:fullname column' to + something like CONCAT(Firstname,' ',Surname)

    - Or, set 'identifier:workstations column' to : - NULL

    See the MySQL documentation for more language constructs.

    XML

    This module requires libxml2 to be installed.

    The usage of pdb_xml is pretty straightforward. To export data, use: + Or, set `identifier:workstations column' to: + NULL

    See the MySQL documentation for more language constructs.

    XML

    + + This module requires libxml2 to be installed.

    The usage of pdb_xml is fairly straightforward. To export data, use:

    + $ pdbedit -e xml:filename

    (where filename is the name of the file to put the data in)

    To import data, use: $ pdbedit -i xml:filename -

    Common Errors

    Users can not logon

    I've installed samba, but now I can't log on with my unix account!

    Make sure your user has been added to the current samba passdb backend. Read the section Account Management Tools for details.

    Users being added to wrong backend database

    +

    Common Errors

    Users Cannot Logon

    I've installed Samba, but now I can't log on with my UNIX account!

    Make sure your user has been added to the current Samba passdb backend. Read the section for details.

    Users Being Added to the Wrong Backend Database

    A few complaints have been received from users that just moved to Samba-3. The following smb.conf file entries were causing problems, new accounts were being added to the old smbpasswd file, not to the tdbsam passdb.tdb file:

    -

    [global]
    ...
    passdb backend = smbpasswd, tdbsam
    ...

    +

    [global]
    ...
    passdb backend = smbpasswd, tdbsam
    ...

    Samba will add new accounts to the first entry in the passdb backend parameter entry. If you want to update to the tdbsam, then change the entry to:

    -

    [globals]
    ...
    passdb backend = tdbsam, smbpasswd
    ...

    -

    auth methods does not work

    - If you explicitly set an auth methods parameter, guest must be specified as the first - entry on the line. Eg: auth methods = guest sam. +

    passdb backend = tdbsam, smbpasswd

    +

    Configuration of auth methods

    + When explicitly setting an auth methods parameter, + guest must be specified as the first entry on the line, + for example, auth methods = guest sam.

    - This is the exact opposite of the requirement for the passdb backend + This is the exact opposite of the requirement for the passdb backend option, where it must be the LAST parameter on the line. -



    [3] Only when the LDAP server supports LDAP_EXOP_X_MODIFY_PASSWD

    Chapter 12. Group Mapping MS Windows and UNIX

    John H. Terpstra

    Samba Team

    Jean François Micouleau

    Gerald (Jerry) Carter

    Samba Team

    + Starting with Samba-3, new group mapping functionality is available to create associations between Windows group SIDs and UNIX groups. The groupmap subcommand included with the net tool can be used to manage these associations. +

    + The new facility for mapping NT Groups to UNIX system groups allows the administrator to decide + which NT Domain Groups are to be exposed to MS Windows clients. Only those NT Groups that map + to a UNIX group that has a value other than the default (-1) will be exposed + in group selection lists in tools that access domain users and groups.

    Warning

    - The first immediate reason to use the group mapping on a Samba PDC, is that - - the domain admin group has been removed and should no longer - be specified in smb.conf. This parameter was used to give the listed users membership - in the Domain Admins Windows group which gave local admin rights on their workstations + + The domain admin group parameter has been removed in Samba-3 and should no longer + be specified in smb.conf. This parameter was used to give the listed users membership in the + Domain Admins Windows group which gave local admin rights on their workstations (in default configurations). -

    Features and Benefits

    - Samba allows the administrator to create MS Windows NT4 / 200x group accounts and to +

    Features and Benefits

    + Samba allows the administrator to create MS Windows NT4/200x group accounts and to arbitrarily associate them with UNIX/Linux group accounts. -

    - Group accounts can be managed using the MS Windows NT4 or MS Windows 200x / XP Professional MMC tools. - Appropriate interface scripts should be provided in smb.conf if it is desired that UNIX / Linux system +

    + + + Group accounts can be managed using the MS Windows NT4 or MS Windows 200x/XP Professional MMC tools. + Appropriate interface scripts should be provided in smb.conf if it is desired that UNIX/Linux system accounts should be automatically created when these tools are used. In the absence of these scripts, and - so long as winbind is running, Samba accounts group accounts that are created using these tools will be - allocated UNIX UIDs/GIDs from the parameters set by the idmap uid/idmap gid settings - in the smb.conf file. -

    Figure 12.1. IDMAP groups

    IDMAP groups

    + so long as winbindd is running, Samba group accounts that are created using these + tools will be allocated UNIX UIDs/GIDs from the ID range specified by the + idmap uid/idmap gid + parameters in the smb.conf file. +

    Figure 12.1. IDMAP: group SID to GID resolution.

    IDMAP: group SID to GID resolution.

    Figure 12.2. IDMAP: GID resolution to matching SID.

    IDMAP: GID resolution to matching SID.

    + In both cases, when winbindd is not running, only locally resolvable groups can be recognized. Please refer to + and . The net groupmap is + used to establish UNIX group to NT SID mappings as shown in . +

    Figure 12.3. IDMAP storing group mappings.

    IDMAP storing group mappings.

    + + Administrators should be aware that where smb.conf group interface scripts make - direct calls to the UNIX/Linux system tools (eg: the shadow utilities, groupadd, - groupdel, groupmod) then the resulting UNIX/Linux group names will be subject - to any limits imposed by these tools. If the tool does NOT allow upper case characters - or space characters, then the creation of an MS Windows NT4 / 200x style group of + direct calls to the UNIX/Linux system tools (the shadow utilities, groupadd, + groupdel, and groupmod), the resulting UNIX/Linux group names will be subject + to any limits imposed by these tools. If the tool does not allow upper case characters + or space characters, then the creation of an MS Windows NT4/200x style group of Engineering Managers will attempt to create an identically named - UNIX/Linux group, an attempt that will of course fail! -

    + UNIX/Linux group, an attempt that will of course fail. +

    + + There are several possible work-arounds for the operating system tools limitation. One method is to use a script that generates a name for the UNIX/Linux system group that - fits the operating system limits, and that then just passes the UNIX/Linux group id (GID) + fits the operating system limits, and that then just passes the UNIX/Linux group ID (GID) back to the calling Samba interface. This will provide a dynamic work-around solution.

    Another work-around is to manually create a UNIX/Linux group, then manually create the - MS Windows NT4 / 200x group on the Samba server and then use the net groupmap + MS Windows NT4/200x group on the Samba server and then use the net groupmap tool to connect the two to each other. -

    Discussion

    - When installing MS Windows NT4 / 200x on a computer, the installation +

    Discussion

    + When installing MS Windows NT4/200x on a computer, the installation program creates default users and groups, notably the Administrators group, - and gives that group privileges necessary privileges to perform essential system tasks. - eg: Ability to change the date and time or to kill (or close) any process running on the + and gives that group privileges necessary privileges to perform essential system tasks, + such as the ability to change the date and time or to kill (or close) any process running on the local machine. -

    - The 'Administrator' user is a member of the 'Administrators' group, and thus inherits - 'Administrators' group privileges. If a 'joe' user is created to be a member of the - 'Administrator' group, 'joe' has exactly the same rights as 'Administrator'. -

    - When an MS Windows NT4 / W200x is made a domain member, the "Domain Admins" group of the - PDC is added to the local 'Administrators' group of the workstation. Every member of the - 'Domain Administrators' group inherits the rights of the local 'Administrators' group when +

    + + The Administrator user is a member of the Administrators group, and thus inherits + Administrators group privileges. If a joe user is created to be a member of the + Administrators group, joe has exactly the same rights as the user, + Administrator. +

    + When an MS Windows NT4/200x/XP machine is made a Domain Member, the “Domain Admins” group of the + PDC is added to the local Administrators group of the workstation. Every member of the + Domain Administrators group inherits the rights of the local Administrators group when logging on the workstation.

    - The following steps describe how to make Samba PDC users members of the 'Domain Admins' group? + The following steps describe how to make Samba PDC users members of the Domain Admins group?

    1. - create a unix group (usually in /etc/group), let's call it domadm -

    2. add to this group the users that must be Administrators. For example - if you want joe, john and mary, your entry in /etc/group will - look like: + Create a UNIX group (usually in /etc/group), let's call it domadm. +

    3. + Add to this group the users that must be “Administrators”. For example, + if you want joe, john and mary to be administrators, + your entry in /etc/group will look like this:

       		domadm:x:502:joe,john,mary
       		

    4. - Map this domadm group to the "Domain Admins" group by running the command: + Map this domadm group to the “Domain Admins” group by running the command:

      -

      -root# net groupmap add ntgroup="Domain Admins" unixgroup=domadm
      -

      -

      - The quotes around "Domain Admins" are necessary due to the space in the group name. - Also make sure to leave no whitespace surrounding the equal character (=). +

      +	root# net groupmap add ntgroup=“Domain Admins” UNIXgroup=domadm
      +	

      +

      + + The quotes around “Domain Admins” are necessary due to the space in the group name. + Also make sure to leave no white-space surrounding the equal character (=).

    - Now joe, john and mary are domain administrators! -

    - It is possible to map any arbitrary UNIX group to any Windows NT4 / 200x group as well as - making any UNIX group a Windows domain group. For example, if you wanted to include a - UNIX group (e.g. acct) in a ACL on a local file or printer on a domain member machine, + Now joe, john and mary are domain administrators. +

    + + It is possible to map any arbitrary UNIX group to any Windows NT4/200x group as well as + making any UNIX group a Windows domain group. For example, if you wanted to include a + UNIX group (e.g., acct) in an ACL on a local file or printer on a Domain Member machine, you would flag that group as a domain group by running the following on the Samba PDC:

    -root# net groupmap add rid=1000 ntgroup="Accounting" unixgroup=acct
    +root# net groupmap add rid=1000 ntgroup="Accounting" UNIXgroup=acct
     

    - Be aware that the RID parameter is a unsigned 32 bit integer that should - normally start at 1000. However, this rid must not overlap with any RID assigned - to a user. Verifying this is done differently depending on the passdb backend - you are using. Future versions of the tools may perform the verification automatically, + Be aware that the RID parameter is a unsigned 32-bit integer that should + normally start at 1000. However, this RID must not overlap with any RID assigned + to a user. Verification for this is done differently depending on the passdb backend + you are using. Future versions of the tools may perform the verification automatically, but for now the burden is on you. -

    Example Configuration

    - You can list the various groups in the mapping database by executing - net groupmap list. Here is an example: -

    +

    Default Users, Groups and Relative Identifiers

    + + + When first installed, Microsoft Windows NT4/200x/XP are preconfigured with certain User, Group, and + Alias entities. Each has a well-known Relative Identifier (RID). These must be preserved for continued + integrity of operation. Samba must be provisioned with certain essential Domain Groups that require + the appropriate RID value. When Samba-3 is configured to use tdbsam the essential + Domain Groups are automatically created. It is the LDAP administrators' responsibility to create + (provision) the default NT Groups. +

    + Each essential Domain Group must be assigned its respective well-kown RID. The default Users, Groups, + Aliases, and RIDs are shown in . +

    Note

    + When the passdb backend uses LDAP (ldapsam) it is the + admininstrators' responsibility to create the essential Domain Groups, and to assign each its default RID. +

    + It is permissible to create any Domain Group that may be necessary, just make certain that the essential + Domain Groups (well known) have been created and assigned its default RID. Other groups you create may + be assigned any arbitrary RID you care to use. +

    + Be sure to map each Domain Group to a UNIX system group. That is the only way to ensure that the group + will be available for use as an NT Domain Group. +

    +

    Table 12.1. Well-Known User Default RIDs

    Well-Known EntityRIDTypeEssential
    Domain Administrator500UserNo
    Domain Guest501UserNo
    Domain KRBTGT502UserNo
    Domain Admins512GroupYes
    Domain Users513GroupYes
    Domain Guests514GroupYes
    Domain Computers515GroupNo
    Domain Controllers516GroupNo
    Domain Certificate Admins517GroupNo
    Domain Schema Admins518GroupNo
    Domain Enterprise Admins519GroupNo
    Domain Policy Admins520GroupNo
    Builtin Admins544AliasNo
    Builtin users545AliasNo
    Builtin Guests546AliasNo
    Builtin Power Users547AliasNo
    Builtin Account Operators548AliasNo
    Builtin System Operators549AliasNo
    Builtin Print Operators550AliasNo
    Builtin Backup Operators551AliasNo
    Builtin Replicator552AliasNo
    Builtin RAS Servers553AliasNo

    +

    Example Configuration

    + You can list the various groups in the mapping database by executing + net groupmap list. Here is an example: +

     root#  net groupmap list
    -System Administrators (S-1-5-21-2547222302-1596225915-2414751004-1002) -> sysadmin
     Domain Admins (S-1-5-21-2547222302-1596225915-2414751004-512) -> domadmin
     Domain Users (S-1-5-21-2547222302-1596225915-2414751004-513) -> domuser
     Domain Guests (S-1-5-21-2547222302-1596225915-2414751004-514) -> domguest
     

    For complete details on net groupmap, refer to the net(8) man page. -

    Configuration Scripts

    +

    Configuration Scripts

    Everyone needs tools. Some of us like to create our own, others prefer to use canned tools - (ie: prepared by someone else for general use). -

    Sample smb.conf add group script

    - A script to create complying group names for use by the Samba group interfaces: -

    -

    Example 12.1. smbgrpadd.sh

    +	(i.e., prepared by someone else for general use). 
    +	

    Sample smb.conf Add Group Script

    + A script to create complying group names for use by the Samba group interfaces + is provided in . +

    +

    Example 12.1. smbgrpadd.sh

     
     #!/bin/bash
     
    @@ -3956,112 +4251,125 @@ echo $thegid
     exit 0
     

    - The smb.conf entry for the above script would look like: -

    add group script = /path_to_tool/smbgrpadd.sh %g

    -

    Script to configure Group Mapping

    + The smb.conf entry for the above script would be something like that in . +

    Example 12.2. Configuration of smb.conf for the add group script.

    [global]
    ...
    add group script = /path_to_tool/smbgrpadd.sh %g
    ...

    +

    Script to Configure Group Mapping

    In our example we have created a UNIX/Linux group called ntadmin. - Our script will create the additional groups Orks, Elves, Gnomes: + Our script will create the additional groups Orks, Elves, and Gnomes. + It is a good idea to save this shell script for later re-use just in case you ever need to rebuild your mapping database. + For the sake of concenience we elect to save this script as a file called initGroups.sh. + This script is given in .

    -

    +
    +

    Example 12.3. Script to Set Group Mapping

     #!/bin/bash
     
     net groupmap modify ntgroup="Domain Admins" unixgroup=ntadmin
     net groupmap modify ntgroup="Domain Users" unixgroup=users
     net groupmap modify ntgroup="Domain Guests" unixgroup=nobody
    -net groupmap modify ntgroup="Administrators" unixgroup=root
    -net groupmap modify ntgroup="Users" unixgroup=users
    -net groupmap modify ntgroup="Guests" unixgroup=nobody
    -net groupmap modify ntgroup="System Operators" unixgroup=sys
    -net groupmap modify ntgroup="Account Operators" unixgroup=root
    -net groupmap modify ntgroup="Backup Operators" unixgroup=bin
    -net groupmap modify ntgroup="Print Operators" unixgroup=lp
    -net groupmap modify ntgroup="Replicators" unixgroup=daemon
    -net groupmap modify ntgroup="Power Users" unixgroup=sys
     
     groupadd Orks
     groupadd Elves
     groupadd Gnomes
     
    -net groupmap add ntgroup="Orks"       unixgroup=Orks         type=d
    -net groupmap add ntgroup="Elves"      unixgroup=Elves        type=d
    -net groupmap add ntgroup="Gnomes"     unixgroup=Gnomes       type=d
    -

    +net groupmap add ntgroup="Orks" unixgroup=Orks type=d +net groupmap add ntgroup="Elves" unixgroup=Elves type=d +net groupmap add ntgroup="Gnomes" unixgroup=Gnomes type=d +

    Of course it is expected that the administrator will modify this to suit local needs. For information regarding the use of the net groupmap tool please refer to the man page. -

    Common Errors

    +

    Common Errors

    At this time there are many little surprises for the unwary administrator. In a real sense it is imperative that every step of automated control scripts must be carefully tested manually before putting them into active service. -

    Adding Groups Fails

    +

    Adding Groups Fails

    This is a common problem when the groupadd is called directly - by the Samba interface script for the add group script in + by the Samba interface script for the add group script in the smb.conf file.

    The most common cause of failure is an attempt to add an MS Windows group account that has either an upper case character and/or a space character in it.

    - There are three possible work-arounds. Firstly, use only group names that comply + There are three possible work-arounds. First, use only group names that comply with the limitations of the UNIX/Linux groupadd system tool. - The second involves use of the script mentioned earlier in this chapter, and the - third option is to manually create a UNIX/Linux group account that can substitute + Second, it involves the use of the script mentioned earlier in this chapter, and + third is the option is to manually create a UNIX/Linux group account that can substitute for the MS Windows group name, then use the procedure listed above to map that group to the MS Windows group. -

    Adding MS Windows Groups to MS Windows Groups Fails

    - Samba-3 does NOT support nested groups from the MS Windows control environment. -

    Adding Domain Users to the Power Users group

    +

    Adding MS Windows Groups to MS Windows Groups Fails

    + Samba-3 does not support nested groups from the MS Windows control environment. +

    Adding Domain Users to the Power Users Group

    What must I do to add Domain Users to the Power Users group? -

    - The Power Users group is a group that is local to each Windows - 200x / XP Professional workstation. You can not add the Domain Users group to the Power Users - group automatically, this must be done on each workstation by logging in as the local workstation - administrator and then using click on Start / Control Panel / Users and Passwords - now click on the 'Advanced' tab, then on the 'Advanced' Button. -

    - Now click on 'Groups', then double click on 'Power Users'. This will launch the panel to add users - or groups to the local machine 'Power Uses' group. Click on the 'Add' button, select the domain - from which the 'Domain Users' group is to be added, double click on the 'Domain Users' group, then - click on the 'Ok' button. Note: If a logon box is presented during this process please remember to - enter the connect as DOMAIN\UserName. ie: For the domain MIDEARTH and the user 'root' enter - MIDEARTH\root. -

    Chapter 13. File, Directory and Share Access Controls

    John H. Terpstra

    Samba Team

    Jeremy Allison

    Samba Team

    Jelmer R. Vernooij

    drawing
    The Samba Team

    May 10, 2003

    + ”

    + The Power Users group is a group that is local to each Windows 200x/XP Professional workstation. + You cannot add the Domain Users group to the Power Users group automatically, it must be done on + each workstation by logging in as the local workstation administrator and + then using the following procedure: +

    1. + Click Start -> Control Panel -> Users and Passwords. +

    2. + Click the Advanced tab. +

    3. + Click the Advanced button. +

    4. + Click Groups. +

    5. + Double click Power Users. This will launch the panel to add users or groups + to the local machine Power Uses group. +

    6. + Click the Add button. +

    7. + Select the domain from which the Domain Users group is to be added. +

    8. + Double click the Domain Users group. +

    9. + Click the Ok button. If a logon box is presented during this process + please remember to enter the connect as DOMAIN\UserName. i.e., For the + domain MIDEARTH and the user root enter + MIDEARTH\root. +

    Chapter 13. File, Directory and Share Access Controls

    John H. Terpstra

    Samba Team

    Jeremy Allison

    Samba Team

    Jelmer R. Vernooij

    drawing
    The Samba Team

    May 10, 2003

    + Advanced MS Windows users are frequently perplexed when file, directory and share manipulation of resources shared via Samba do not behave in the manner they might expect. MS Windows network administrators are often confused regarding network access controls and how to -provide users with the access they need while protecting resources from unauthorised access. +provide users with the access they need while protecting resources from unauthorized access.

    Many UNIX administrators are unfamiliar with the MS Windows environment and in particular have difficulty in visualizing what the MS Windows user wishes to achieve in attempts to set file and directory access permissions.

    The problem lies in the differences in how file and directory permissions and controls work -between the two environments. This difference is one that Samba can not completely hide, even +between the two environments. This difference is one that Samba cannot completely hide, even though it does try to bridge the chasm to a degree. -

    +

    + + + POSIX Access Control List technology has been available (along with Extended Attributes) for UNIX for many years, yet there is little evidence today of any significant use. This explains to some extent the slow adoption of ACLs into commercial Linux products. MS Windows -administrators are astounded at this given that ACLs were a foundational capability of the now -decade old MS Windows NT operating system. +administrators are astounded at this, given that ACLs were a foundational capability of the now +decade-old MS Windows NT operating system.

    The purpose of this chapter is to present each of the points of control that are possible with Samba-3 in the hope that this will help the network administrator to find the optimum method for delivering the best environment for MS Windows desktop users.

    This is an opportune point to mention that Samba was created to provide a means of interoperability -and interchange of data between differing operating environments. Samba has no intent change +and interchange of data between differing operating environments. Samba has no intent to change UNIX/Linux into a platform like MS Windows. Instead the purpose was and is to provide a sufficient -level of exchange of data between the two environments. What is available today extends well +level of exchange of data between the two environments. What is available today extends well beyond early plans and expectations, yet the gap continues to shrink. -

    Features and Benefits

    +

    Features and Benefits

    Samba offers a lot of flexibility in file system access management. These are the key access control facilities present in Samba today:

    Samba Access Control Facilities

    • + UNIX File and Directory Permissions

      - Samba honours and implements UNIX file system access controls. Users + Samba honors and implements UNIX file system access controls. Users who access a Samba server will do so as a particular MS Windows user. This information is passed to the Samba server as part of the logon or connection setup process. Samba uses this user identity to validate @@ -4071,116 +4379,132 @@ beyond early plans and expectations, yet the gap continues to shrink.

    • Samba Share Definitions

      - In configuring share settings and controls in the smb.conf file - the network administrator can exercise over-rides to native file - system permissions and behaviours. This can be handy and convenient - to affect behaviour that is more like what MS Windows NT users expect + In configuring share settings and controls in the smb.conf file, + the network administrator can exercise overrides to native file + system permissions and behaviors. This can be handy and convenient + to effect behavior that is more like what MS Windows NT users expect but it is seldom the best way to achieve this. The basic options and techniques are described herein.

    • Samba Share ACLs +

      Just like it is possible in MS Windows NT to set ACLs on shares themselves, so it is possible to do this in Samba. - Very few people make use of this facility, yet it remains on of the + Few people make use of this facility, yet it remains on of the easiest ways to affect access controls (restrictions) and can often do so with minimum invasiveness compared with other methods.

    • + + MS Windows ACLs through UNIX POSIX ACLs

      - The use of POSIX ACLs on UNIX/Linux is possible ONLY if the underlying + The use of POSIX ACLs on UNIX/Linux is possible only if the underlying operating system supports them. If not, then this option will not be available to you. Current UNIX technology platforms have native support - for POSIX ACLs. There are patches for the Linux kernel that provide - this also. Sadly, few Linux platforms ship today with native ACLs and + for POSIX ACLs. There are patches for the Linux kernel that also provide + this. Sadly, few Linux platforms ship today with native ACLs and Extended Attributes enabled. This chapter has pertinent information for users of platforms that support them. -

    File System Access Controls

    -Perhaps the most important recognition to be made is the simple fact that MS Windows NT4 / 200x / XP +

    File System Access Controls

    +Perhaps the most important recognition to be made is the simple fact that MS Windows NT4/200x/XP implement a totally divergent file system technology from what is provided in the UNIX operating system -environment. Firstly we should consider what the most significant differences are, then we shall look +environment. First we consider what the most significant differences are, then we look at how Samba helps to bridge the differences. -

    MS Windows NTFS Comparison with UNIX File Systems

    +

    MS Windows NTFS Comparison with UNIX File Systems

    + + + + + Samba operates on top of the UNIX file system. This means it is subject to UNIX file system conventions and permissions. It also means that if the MS Windows networking environment requires file system - behaviour that differs from unix file system behaviour then somehow Samba is responsible for emulating + behavior that differs from UNIX file system behavior then somehow Samba is responsible for emulating that in a transparent and consistent manner.

    - It is good news that Samba does this to a very large extent and on top of that provides a high degree - of optional configuration to over-ride the default behaviour. We will look at some of these over-rides, - but for the greater part we will stay within the bounds of default behaviour. Those wishing to explore - to depths of control ability should review the smb.conf man page. -

    File System Feature Comparison

    Name Space

    - MS Windows NT4 / 200x/ XP files names may be up to 254 characters long, UNIX file names - may be 1023 characters long. In MS Windows file extensions indicate particular file types, + It is good news that Samba does this to a large extent and on top of that provides a high degree + of optional configuration to override the default behavior. We look at some of these over-rides, + but for the greater part we will stay within the bounds of default behavior. Those wishing to explore + the depths of control ability should review the smb.conf man page. +

    The following compares file system features for UNIX with those of Microsoft Windows NT/200x: + + +

    Name Space

    + MS Windows NT4/200x/XP files names may be up to 254 characters long, and UNIX file names + may be 1023 characters long. In MS Windows, file extensions indicate particular file types, in UNIX this is not so rigorously observed as all names are considered arbitrary.

    - What MS Windows calls a Folder, UNIX calls a directory. + What MS Windows calls a folder, UNIX calls a directory.

    Case Sensitivity

    - - MS Windows file names are generally upper case if made up of 8.3 (ie: 8 character file name - and 3 character extension. If longer than 8.3 file names are Case Preserving, and Case - Insensitive. + + + MS Windows file names are generally upper case if made up of 8.3 (8 character file name + and 3 character extension. File names that are longer than 8.3 are case preserving and case + insensitive.

    UNIX file and directory names are case sensitive and case preserving. Samba implements the - MS Windows file name behaviour, but it does so as a user application. The UNIX file system + MS Windows file name behavior, but it does so as a user application. The UNIX file system provides no mechanism to perform case insensitive file name lookups. MS Windows does this by default. This means that Samba has to carry the processing overhead to provide features - that are NOT native to the UNIX operating system environment. + that are not native to the UNIX operating system environment.

    - Consider the following, all are unique UNIX names but one single MS Windows file name: - + Consider the following. All are unique UNIX names but one single MS Windows file name: +

     				MYFILE.TXT
     				MyFile.txt
     				myfile.txt
    -		
    -		So clearly, In an MS Windows file name space these three files CAN NOT co-exist! But in UNIX 
    -		they can. So what should Samba do if all three are present? Answer, the one that is lexically
    -		first will be accessible to MS Windows users, the others are invisible and unaccessible - any
    +		

    + So clearly, in an MS Windows file name space these three files cannot co-exist, but in UNIX + they can. +

    + So what should Samba do if all three are present? That which is lexically first will be + accessible to MS Windows users, the others are invisible and unaccessible any other solution would be suicidal.

    Directory Separators

    - MS Windows and DOS uses the back-slash '\' as a directory delimiter, UNIX uses the forward-slash '/' - as it's directory delimiter. This is transparently handled by Samba. + + MS Windows and DOS uses the backslash \ as a directory delimiter, and UNIX uses + the forward-slash / as its directory delimiter. This is handled transparently by Samba.

    Drive Identification

    + MS Windows products support a notion of drive letters, like C: to represent - disk partitions. UNIX has NO concept if separate identifiers for file partitions since each - such file system is mounted to become part of the over-all directory tree. - The UNIX directory tree begins at '/', just like the root of a DOS drive is specified like - C:\. + disk partitions. UNIX has no concept of separate identifiers for file partitions, each + such file system is mounted to become part of the overall directory tree. + The UNIX directory tree begins at / just like the root of a DOS drive is specified as + C:\.

    File Naming Conventions

    - MS Windows generally never experiences file names that begin with a '.', while in UNIX these - are commonly found in a user's home directory. Files that begin with a '.' are typically - either start up files for various UNIX applications, or they may be files that contain + + MS Windows generally never experiences file names that begin with a dot (.) while in UNIX these + are commonly found in a user's home directory. Files that begin with a dot (.) are typically + either start-up files for various UNIX applications, or they may be files that contain start-up configuration data.

    Links and Short-Cuts

    - - - - - MS Windows make use of "links and Short-Cuts" that are actually special types of files that will + + + + MS Windows make use of “links and short-cuts” that are actually special types of files that will redirect an attempt to execute the file to the real location of the file. UNIX knows of file and directory links, but they are entirely different from what MS Windows users are used to.

    - Symbolic links are files in UNIX that contain the actual location of the data (file OR directory). An + Symbolic links are files in UNIX that contain the actual location of the data (file or directory). An operation (like read or write) will operate directly on the file referenced. Symbolic links are also - referred to as 'soft links'. A hard link is something that MS Windows is NOT familiar with. It allows + referred to as “soft links.” A hard link is something that MS Windows is not familiar with. It allows one physical file to be known simultaneously by more than one file name.

    There are many other subtle differences that may cause the MS Windows administrator some temporary discomfort in the process of becoming familiar with UNIX/Linux. These are best left for a text that is dedicated to the - purpose of UNIX/Linux training/education. -

    Managing Directories

    - There are three basic operations for managing directories, create, delete, rename. -

    Table 13.1. Managing directories with unix and windows

    ActionMS Windows CommandUNIX Command
    createmd foldermkdir folder
    deleterd folderrmdir folder
    renamerename oldname newnamemv oldname newname

    -

    File and Directory Access Control

    + purpose of UNIX/Linux training and education. +

    Managing Directories

    + There are three basic operations for managing directories: create, delete, rename. +

    Table 13.1. Managing Directories with UNIX and Windows

    ActionMS Windows CommandUNIX Command
    createmd foldermkdir folder
    deleterd folderrmdir folder
    renamerename oldname newnamemv oldname newname

    +

    File and Directory Access Control

    + The network administrator is strongly advised to read foundational training manuals and reference materials regarding file and directory permissions maintenance. Much can be achieved with the basic UNIX permissions without having to resort to more complex facilities like POSIX Access Control Lists (ACLs) or Extended Attributes (EAs).

    - UNIX/Linux file and directory access permissions involves setting three (3) primary sets of data and one (1) control set. - A UNIX file listing looks as follows:- - + UNIX/Linux file and directory access permissions involves setting three primary sets of data and one control set. + A UNIX file listing looks as follows:

     $ ls -la
     total 632
    @@ -4201,393 +4525,381 @@ drwsrwsrwx    2 maryo   gnomes       48 2003-05-12 22:29 muchado08
     	

    The columns above represent (from left to right): permissions, number of hard links to file, owner, group, size (bytes), access date, access time, file name.

    - An overview of the permissions field can be found in the image below. -

    Figure 13.1. Overview of unix permissions field

    Overview of unix permissions field

    - Any bit flag may be unset. An unset bit flag is the equivalent of 'Can NOT' and is represented as a '-' character. + An overview of the permissions field can be found in . +

    Figure 13.1. Overview of UNIX permissions field.

    Overview of UNIX permissions field.

    + Any bit flag may be unset. An unset bit flag is the equivalent of “cannot” and is represented as a “-” character. -

    Example 13.1. Example File

    +	

    Example 13.1. Example File

     		-rwxr-x---   Means: The owner (user) can read, write, execute
     		                    the group can read and execute
    -		                    everyone else can NOT do anything with it
    +		                    everyone else cannot do anything with it.
     		

    Additional possibilities in the [type] field are: c = character device, b = block device, p = pipe device, s = UNIX Domain Socket.

    - The letters `rwxXst' set permissions for the user, group and others as: read (r), write (w), execute (or access for directories) (x), + The letters rwxXst set permissions for the user, group and others as: read (r), write (w), execute (or access for directories) (x), execute only if the file is a directory or already has execute permission for some user (X), set user or group ID on execution (s), sticky (t).

    When the sticky bit is set on a directory, files in that directory may be unlinked (deleted) or renamed only by root or their owner. Without the sticky bit, anyone able to write to the directory can delete or rename files. The sticky bit is commonly found on - directories, such as /tmp, that are world-writable. + directories, such as /tmp, that are world-writable.

    When the set user or group ID bit (s) is set on a directory, then all files created within it will be owned by the user and/or - group whose 'set user or group' bit is set. This can be very helpful in setting up directories that for which it is desired that + group whose `set user or group' bit is set. This can be helpful in setting up directories for which it is desired that all users who are in a group should be able to write to and read from a file, particularly when it is undesirable for that file - to be exclusively owned by a user who's primary group is not the group that all such users belong to. + to be exclusively owned by a user whose primary group is not the group that all such users belong to.

    When a directory is set drw-r----- this means that the owner can read and create (write) files in it, but because - the (x) execute flags are not set files can not be listed (seen) in the directory by anyone. The group can read files in the - directory but can NOT create new files. NOTE: If files in the directory are set to be readable and writable for the group, then + the (x) execute flags are not set, files cannot be listed (seen) in the directory by anyone. The group can read files in the + directory but cannot create new files. If files in the directory are set to be readable and writable for the group, then group members will be able to write to (or delete) them. -

    Share Definition Access Controls

    -The following parameters in the smb.conf file sections that define a share control or affect access controls. -Before using any of the following options please refer to the man page for smb.conf. -

    User and Group Based Controls

    - User and group based controls can prove very useful. In some situations it is distinctly desirable to affect all - file system operations as if a single user is doing this, the use of the force user and - force group behaviour will achieve this. In other situations it may be necessary to affect a - paranoia level of control to ensure that only particular authorised persons will be able to access a share or - it's contents, here the use of the valid users or the invalid users may - be most useful. +

    Share Definition Access Controls

    + +The following parameters in the smb.conf file sections define a share control or effect access controls. +Before using any of the following options, please refer to the man page for smb.conf. +

    User and Group-Based Controls

    + User and group-based controls can prove quite useful. In some situations it is distinctly desirable to affect all + file system operations as if a single user were doing so. The use of the force user and + force group behavior will achieve this. In other situations it may be necessary to effect a + paranoia level of control to ensure that only particular authorized persons will be able to access a share or + its contents. Here the use of the valid users or the + invalid users may be most useful.

    As always, it is highly advisable to use the least difficult to maintain and the least ambiguous method for - controlling access. Remember, that when you leave the scene someone else will need to provide assistance and - if that person finds too great a mess, or if they do not understand what you have done then there is risk of + controlling access. Remember, when you leave the scene someone else will need to provide assistance and + if he finds too great a mess or does not understand what you have done, there is risk of Samba being removed and an alternative solution being adopted. -

    Table 13.2. User and Group Based Controls

    Control ParameterDescription - Action - Notes
    admin users

    +

    + enumerates these controls. +

    Table 13.2. User and Group Based Controls

    Control ParameterDescription - Action - Notes
    admin users

    List of users who will be granted administrative privileges on the share. - They will do all file operations as the super-user (root). + They will do all file operations as the super-user (root). Any user in this list will be able to do anything they like on the share, irrespective of file permissions. -

    force group

    +

    force group

    Specifies a UNIX group name that will be assigned as the default primary group for all users connecting to this service. -

    force user

    +

    force user

    Specifies a UNIX user name that will be assigned as the default user for all users connecting to this service. This is useful for sharing files. Incorrect use can cause security problems. -

    guest ok

    +

    guest ok

    If this parameter is set for a service, then no password is required to connect to the service. Privileges will be those of the guest account. -

    invalid users

    +

    invalid users

    List of users that should not be allowed to login to this service. -

    only user

    +

    only user

    Controls whether connections with usernames not in the user list will be allowed. -

    read list

    +

    read list

    List of users that are given read-only access to a service. Users in this list will not be given write access, no matter what the read only option is set to. -

    username

    - Refer to the smb.conf man page for more information - this is a complex and potentially misused parameter. -

    valid users

    +

    username

    + Refer to the smb.conf man page for more information -- this is a complex and potentially misused parameter. +

    valid users

    List of users that should be allowed to login to this service. -

    write list

    +

    write list

    List of users that are given read-write access to a service. -

    File and Directory Permissions Based Controls

    - The following file and directory permission based controls, if misused, can result in considerable difficulty to - diagnose the cause of mis-configuration. Use them sparingly and carefully. By gradually introducing each one by one - undesirable side-effects may be detected. In the event of a problem, always comment all of them out and then gradually - re-introduce them in a controlled fashion. -

    Table 13.3. File and Directory Permission Based Controls

    Control ParameterDescription - Action - Notes
    create mask

    +

    File and Directory Permissions-Based Controls

    + The following file and directory permission-based controls, if misused, can result in considerable difficulty to + diagnose causes of misconfiguration. Use them sparingly and carefully. By gradually introducing each one by one, + undesirable side effects may be detected. In the event of a problem, always comment all of them out and then gradually + reintroduce them in a controlled way. +

    + Refer to for information regarding the parameters that may be used to affect file and + directory permission-based access controls. +

    Table 13.3. File and Directory Permission Based Controls

    Control ParameterDescription - Action - Notes
    create mask

    Refer to the smb.conf man page. -

    directory mask

    +

    directory mask

    The octal modes used when converting DOS modes to UNIX modes when creating UNIX directories. See also: directory security mask. -

    dos filemode

    +

    dos filemode

    Enabling this parameter allows a user who has write access to the file to modify the permissions on it. -

    force create mode

    +

    force create mode

    This parameter specifies a set of UNIX mode bit permissions that will always be set on a file created by Samba. -

    force directory mode

    +

    force directory mode

    This parameter specifies a set of UNIX mode bit permissions that will always be set on a directory created by Samba. -

    force directory security mode

    - Controls UNIX permission bits modified when a Windows NT client is manipulating UNIX permissions on a directory -

    force security mode

    +

    force directory security mode

    + Controls UNIX permission bits modified when a Windows NT client is manipulating UNIX permissions on a directory. +

    force security mode

    Controls UNIX permission bits modified when a Windows NT client manipulates UNIX permissions. -

    hide unreadable

    +

    hide unreadable

    Prevents clients from seeing the existence of files that cannot be read. -

    hide unwriteable files

    +

    hide unwriteable files

    Prevents clients from seeing the existence of files that cannot be written to. Unwriteable directories are shown as usual. -

    nt acl support

    +

    nt acl support

    This parameter controls whether smbd will attempt to map UNIX permissions into Windows NT access control lists. -

    security mask

    +

    security mask

    Controls UNIX permission bits modified when a Windows NT client is manipulating the UNIX permissions on a file. -

    Miscellaneous Controls

    +

    Miscellaneous Controls

    The following are documented because of the prevalence of administrators creating inadvertent barriers to file - access by not understanding the full implications of smb.conf file settings. -

    Table 13.4. Other Controls

    Control ParameterDescription - Action - Notes
    case sensitive, default case, short preserve case

    + access by not understanding the full implications of smb.conf file settings. See . +

    Table 13.4. Other Controls

    Control ParameterDescription - Action - Notes
    case sensitive, default case, short preserve case

    This means that all file name lookup will be done in a case sensitive manner. - Files will be created with the precise filename Samba received from the MS Windows client. -

    csc policy

    + Files will be created with the precise file name Samba received from the MS Windows client. +

    csc policy

    Client Side Caching Policy - parallels MS Windows client side file caching capabilities. -

    dont descend

    - Allows to specify a comma-delimited list of directories that the server should always show as empty. -

    dos filetime resolution

    +

    dont descend

    + Allows specifying a comma-delimited list of directories that the server should always show as empty. +

    dos filetime resolution

    This option is mainly used as a compatibility option for Visual C++ when used against Samba shares. -

    dos filetimes

    - DOS and Windows allows users to change file time stamps if they can write to the file. POSIX semantics prevent this. - This options allows DOS and Windows behaviour. -

    fake oplocks

    +

    dos filetimes

    + DOS and Windows allow users to change file time stamps if they can write to the file. POSIX semantics prevent this. + This option allows DOS and Windows behavior. +

    fake oplocks

    Oplocks are the way that SMB clients get permission from a server to locally cache file operations. If a server grants an - oplock then the client is free to assume that it is the only one accessing the file and it will aggressively cache file data. -

    hide dot files, hide files, veto files

    + oplock, the client is free to assume that it is the only one accessing the file and it will aggressively cache file data. +

    hide dot files, hide files, veto files

    Note: MS Windows Explorer allows over-ride of files marked as hidden so they will still be visible. -

    read only

    +

    read only

    If this parameter is yes, then users of a service may not create or modify files in the service's directory. -

    veto files

    +

    veto files

    List of files and directories that are neither visible nor accessible. -

    Access Controls on Shares

    +

    Access Controls on Shares

    + This section deals with how to configure Samba per share access control restrictions. By default, Samba sets no restrictions on the share itself. Restrictions on the share itself - can be set on MS Windows NT4/200x/XP shares. This can be a very effective way to limit who can + can be set on MS Windows NT4/200x/XP shares. This can be an effective way to limit who can connect to a share. In the absence of specific restrictions the default setting is to allow - the global user Everyone Full Control (ie: Full control, Change and Read). + the global user Everyone - Full Control (full control, change and read).

    - At this time Samba does NOT provide a tool for configuring access control setting on the Share + At this time Samba does not provide a tool for configuring access control setting on the share itself. Samba does have the capacity to store and act on access control settings, but the only way to create those settings is to use either the NT4 Server Manager or the Windows 200x MMC for Computer Management.

    Samba stores the per share access control settings in a file called share_info.tdb. - The location of this file on your system will depend on how samba was compiled. The default location + The location of this file on your system will depend on how Samba was compiled. The default location for Samba's tdb files is under /usr/local/samba/var. If the tdbdump utility has been compiled and installed on your system, then you can examine the contents of this file - by: tdbdump share_info.tdb. -

    Share Permissions Management

    + by executing: tdbdump share_info.tdb in the directory containing the tdb files. +

    Share Permissions Management

    The best tool for the task is platform dependant. Choose the best tool for your environment. -

    Windows NT4 Workstation/Server

    +

    Windows NT4 Workstation/Server

    The tool you need to use to manage share permissions on a Samba server is the NT Server Manager. Server Manager is shipped with Windows NT4 Server products but not with Windows NT4 Workstation. - You can obtain the NT Server Manager for MS Windows NT4 Workstation from Microsoft - see details below. + You can obtain the NT Server Manager for MS Windows NT4 Workstation from Microsoft see details below.

    Procedure 13.1. Instructions

    1. - Launch the NT4 Server Manager, click on the Samba server you want to administer, then from the menu - select Computer, then click on the Shared Directories entry. + Launch the NT4 Server Manager, click on the Samba server you want to administer. From the menu + select Computer, then click on Shared Directories.

    2. - Now click on the share that you wish to manage, then click on the Properties tab, next click on + Click on the share that you wish to manage, then click the Properties tab. then click the Permissions tab. Now you can add or change access control settings as you wish. -

    Windows 200x/XP

    +

    Windows 200x/XP

    On MS Windows NT4/200x/XP system access control lists on the share itself are set using native - tools, usually from file manager. For example, in Windows 200x: right click on the shared folder, + tools, usually from File Manager. For example, in Windows 200x, right click on the shared folder, then select Sharing, then click on Permissions. The default - Windows NT4/200x permission allows Everyone Full Control on the Share. + Windows NT4/200x permission allows “Everyone” full control on the share.

    - MS Windows 200x and later all comes with a tool called the Computer Management snap-in for the - Microsoft Management Console (MMC). This tool is located by clicking on Control Panel -> - Administrative Tools -> Computer Management. + MS Windows 200x and later versions come with a tool called the Computer Management snap-in for the + Microsoft Management Console (MMC). This tool is located by clicking on Control Panel -> + Administrative Tools -> Computer Management.

    Procedure 13.2. Instructions

    1. - After launching the MMC with the Computer Management snap-in, click on the menu item Action, - select Connect to another computer. If you are not logged onto a domain you will be prompted - to enter a domain login user identifier and a password. This will authenticate you to the domain. - If you where already logged in with administrative privilege this step is not offered. + After launching the MMC with the Computer Management snap-in, click the menu item Action, + and select Connect to another computer. If you are not logged onto a domain you will be prompted + to enter a domain login user identifier and a password. This will authenticate you to the domain. + If you are already logged in with administrative privilege, this step is not offered.

    2. - If the Samba server is not shown in the Select Computer box, then type in the name of the target - Samba server in the field Name:. Now click on the [+] next to + If the Samba server is not shown in the Select Computer box, type in the name of the target + Samba server in the field Name:. Now click the on [+] next to System Tools, then on the [+] next to Shared Folders in the left panel.

    3. - Now in the right panel, double-click on the share you wish to set access control permissions on. - Then click on the tab Share Permissions. It is now possible to add access control entities - to the shared folder. Do NOT forget to set what type of access (full control, change, read) you + In the right panel, double-click on the share on which you wish to set access control permissions. + Then click the tab Share Permissions. It is now possible to add access control entities + to the shared folder. Remember to set what type of access (full control, change, read) you wish to assign for each entry.

    Warning

    - Be careful. If you take away all permissions from the Everyone user without removing this user - then effectively no user will be able to access the share. This is a result of what is known as - ACL precedence. ie: Everyone with no access means that MaryK who is part of the group - Everyone will have no access even if this user is given explicit full control access. -

    MS Windows Access Control Lists and UNIX Interoperability

    Managing UNIX permissions Using NT Security Dialogs

    + Be careful. If you take away all permissions from the Everyone user without removing this user, + effectively no user will be able to access the share. This is a result of what is known as + ACL precedence. Everyone with no access means that MaryK who is part of the group + Everyone will have no access even if she is given explicit full control access. +

    MS Windows Access Control Lists and UNIX Interoperability

    Managing UNIX Permissions Using NT Security Dialogs

    + Windows NT clients can use their native security settings dialog box to view and modify the underlying UNIX permissions.

    - Note that this ability is careful not to compromise the security of the UNIX host Samba is running on, and + This ability is careful not to compromise the security of the UNIX host on which Samba is running, and still obeys all the file permission rules that a Samba administrator can set.

    - Samba does not attempt to go beyond POSIX ACLs, so that the various finer-grained access control - options provided in Windows are actually ignore. + Samba does not attempt to go beyond POSIX ACLs, so the various finer-grained access control + options provided in Windows are actually ignored.

    Note

    All access to UNIX/Linux system files via Samba is controlled by the operating system file access controls. - When trying to figure out file access problems it is vitally important to find the identity of the Windows + When trying to figure out file access problems, it is vitally important to find the identity of the Windows user as it is presented by Samba at the point of file access. This can best be determined from the Samba log files. -

    Viewing File Security on a Samba Share

    - From an NT4/2000/XP client, single-click with the right mouse button on any file or directory in a Samba - mounted drive letter or UNC path. When the menu pops-up, click on the Properties - entry at the bottom of the menu. This brings up the file properties dialog box. Click on the tab - Security and you will see three buttons, Permissions, +

    Viewing File Security on a Samba Share

    + From an NT4/2000/XP client, right click on any file or directory in a Samba-mounted drive letter + or UNC path. When the menu pops up, click on the Properties entry at the bottom + of the menu. This brings up the file Properties dialog box. Click on the + Security tab and you will see three buttons: Permissions, Auditing, and Ownership. The Auditing - button will cause either an error message A requested privilege is not held by the client + button will cause either an error message `A requested privilege is not held by the client' to appear if the user is not the NT Administrator, or a dialog which is intended to allow an Administrator to add auditing requirements to a file if the user is logged on as the NT Administrator. This dialog is non-functional with a Samba share at this time, as the only useful button, the Add - button will not currently allow a list of users to be seen. -

    Viewing file ownership

    + button, will not currently allow a list of users to be seen. +

    Viewing File Ownership

    Clicking on the Ownership button brings up a dialog box telling you who owns - the given file. The owner name will be of the form: + the given file. The owner name will be displayed like this:

    - "SERVER\user (Long name)" + SERVER\user (Long name)

    - Where SERVER is the NetBIOS name of the Samba server, user + SERVER is the NetBIOS name of the Samba server, user is the user name of the UNIX user who owns the file, and (Long name) is the descriptive string identifying the user (normally found in the GECOS field of the UNIX password database). Click on the Close button to remove this dialog.

    - If the parameter nt acl support is set to false - then the file owner will be shown as the NT user "Everyone". + If the parameter nt acl support is set to false, + the file owner will be shown as the NT user Everyone.

    The Take Ownership button will not allow you to change the ownership of this file to - yourself (clicking on it will display a dialog box complaining that the user you are currently logged onto + yourself (clicking it will display a dialog box complaining that the user you are currently logged onto the NT client cannot be found). The reason for this is that changing the ownership of a file is a privileged operation in UNIX, available only to the root user. As clicking on this button causes - NT to attempt to change the ownership of a file to the current user logged into the NT client this will + NT to attempt to change the ownership of a file to the current user logged into the NT clienti, this will not work with Samba at this time.

    - There is an NT chown command that will work with Samba and allow a user with Administrator privilege connected + There is an NT chown command that will work with Samba and allow a user with Administrator privilege connected to a Samba server as root to change the ownership of files on both a local NTFS filesystem or remote mounted NTFS or Samba drive. This is available as part of the Seclib NT security library written - by Jeremy Allison of the Samba-Team, available from the main Samba FTP site.

    Viewing File or Directory Permissions

    + by Jeremy Allison of the Samba Team, and is available from the main Samba FTP site.

    Viewing File or Directory Permissions

    The third button is the Permissions button. Clicking on this brings up a dialog box - that shows both the permissions and the UNIX owner of the file or directory. The owner is displayed in the form: -

    "SERVER\ + that shows both the permissions and the UNIX owner of the file or directory. The owner is displayed like this: +

    SERVER\ user - (Long name)"

    Where SERVER is the NetBIOS name of the Samba server, + (Long name)

    Where SERVER is the NetBIOS name of the Samba server, user is the user name of the UNIX user who owns the file, and (Long name) is the descriptive string identifying the user (normally found in the GECOS field of the UNIX password database).

    - If the parameter nt acl support is set to false - then the file owner will be shown as the NT user "Everyone" and the permissions will be - shown as NT "Full Control". + If the parameter nt acl support is set to false, + the file owner will be shown as the NT user Everyone and the permissions will be + shown as NT “Full Control”.

    The permissions field is displayed differently for files and directories, so I'll describe the way file permissions are displayed first. -

    File Permissions

    The standard UNIX user/group/world triplet and - the corresponding "read", "write", "execute" permissions - triplets are mapped by Samba into a three element NT ACL - with the 'r', 'w', and 'x' bits mapped into the corresponding - NT permissions. The UNIX world permissions are mapped into - the global NT group Everyone, followed - by the list of permissions allowed for UNIX world. The UNIX - owner and group permissions are displayed as an NT - user icon and an NT local - group icon respectively followed by the list - of permissions allowed for the UNIX user and group.

    As many UNIX permission sets don't map into common - NT names such as read, - "change" or full control then - usually the permissions will be prefixed by the words - "Special Access" in the NT display list.

    But what happens if the file has no permissions allowed - for a particular UNIX user group or world component? In order - to allow "no permissions" to be seen and modified then Samba - overloads the NT "Take Ownership" ACL attribute - (which has no meaning in UNIX) and reports a component with - no permissions as having the NT "O" bit set. - This was chosen of course to make it look like a zero, meaning - zero permissions. More details on the decision behind this will - be given below.

    Directory Permissions

    Directories on an NT NTFS file system have two - different sets of permissions. The first set of permissions - is the ACL set on the directory itself, this is usually displayed - in the first set of parentheses in the normal "RW" - NT style. This first set of permissions is created by Samba in - exactly the same way as normal file permissions are, described - above, and is displayed in the same way.

    The second set of directory permissions has no real meaning - in the UNIX permissions world and represents the - inherited permissions that any file created within - this directory would inherit.

    Samba synthesises these inherited permissions for NT by - returning as an NT ACL the UNIX permission mode that a new file - created by Samba on this share would receive.

    Modifying file or directory permissions

    Modifying file and directory permissions is as simple +

    File Permissions

    The standard UNIX user/group/world triplet and the corresponding read, write, execute permissions + triplets are mapped by Samba into a three element NT ACL with the “r”, “w” and “x” bits mapped into the corresponding + NT permissions. The UNIX world permissions are mapped into the global NT group Everyone, followed + by the list of permissions allowed for UNIX world. The UNIX owner and group permissions are displayed as an NT + user icon and an NT local group icon, respectively, followed by the list + of permissions allowed for the UNIX user and group.

    Because many UNIX permission sets do not map into common NT names such as read, + change or full control, usually the permissions will be prefixed + by the words Special Access in the NT display list.

    But what happens if the file has no permissions allowed for a particular UNIX user group or world component? In order + to allow “no permissions” to be seen and modified Samba then overloads the NT Take Ownership ACL attribute + (which has no meaning in UNIX) and reports a component with no permissions as having the NT O bit set. + This was chosen, of course, to make it look like a zero, meaning zero permissions. More details on the decision behind this is + given below.

    Directory Permissions

    Directories on an NT NTFS file system have two different sets of permissions. The first set is the ACL set on the + directory itself, which is usually displayed in the first set of parentheses in the normal RW + NT style. This first set of permissions is created by Samba in exactly the same way as normal file permissions are, described + above, and is displayed in the same way.

    The second set of directory permissions has no real meaning in the UNIX permissions world and represents the + inherited permissions that any file created within this directory would inherit.

    Samba synthesises these inherited permissions for NT by returning as an NT ACL the UNIX permission mode that a new file + created by Samba on this share would receive.

    Modifying File or Directory Permissions

    Modifying file and directory permissions is as simple as changing the displayed permissions in the dialog box, and - clicking the OK button. However, there are + clicking on OK. However, there are limitations that a user needs to be aware of, and also interactions with the standard Samba permission masks and mapping of DOS - attributes that need to also be taken into account.

    If the parameter nt acl support - is set to false then any attempt to set - security permissions will fail with an "Access Denied" - message.

    The first thing to note is that the "Add" + attributes that need to also be taken into account.

    If the parameter nt acl support + is set to false, any attempt to set + security permissions will fail with an `Access Denied' + message.

    The first thing to note is that the Add button will not return a list of users in Samba (it will give - an error message of The remote procedure call failed - and did not execute). This means that you can only + an error message saying `The remote procedure call failed + and did not execute'). This means that you can only manipulate the current user/group/world permissions listed in the dialog box. This actually works quite well as these are the only permissions that UNIX actually has.

    If a permission triplet (either user, group, or world) is removed from the list of permissions in the NT dialog box, then when the OK button is pressed it will - be applied as "no permissions" on the UNIX side. If you then - view the permissions again the "no permissions" entry will appear - as the NT "O" flag, as described above. This + be applied as “no permissions” on the UNIX side. If you then + view the permissions again, the “no permissions” entry will appear + as the NT O flag, as described above. This allows you to add permissions back to a file or directory once - you have removed them from a triplet component.

    As UNIX supports only the "r", "w" and "x" bits of - an NT ACL then if other NT security attributes such as "Delete - access" are selected then they will be ignored when applied on - the Samba server.

    When setting permissions on a directory the second + you have removed them from a triplet component.

    As UNIX supports only the “r”, “w” and “x” bits of + an NT ACL, if other NT security attributes such as Delete Access are + selected they will be ignored when applied on the Samba server.

    When setting permissions on a directory, the second set of permissions (in the second set of parentheses) is by default applied to all files within that directory. If this - is not what you want you must uncheck the Replace + is not what you want, you must uncheck the Replace permissions on existing files checkbox in the NT - dialog before clicking OK.

    If you wish to remove all permissions from a - user/group/world component then you may either highlight the - component and click the Remove button, + dialog before clicking on OK.

    If you wish to remove all permissions from a + user/group/world component, you may either highlight the + component and click on the Remove button, or set the component to only have the special Take - Ownership permission (displayed as "O" - ) highlighted.

    Interaction with the standard Samba create mask - parameters

    There are four parameters - to control interaction with the standard Samba create mask parameters. - These are : + Ownership permission (displayed as O + ) highlighted.

    Interaction with the Standard Samba “create mask” Parameters

    There are four parameters that control interaction with the standard Samba create mask parameters. + These are: -

    • security mask

    • force security mode

    • directory security mask

    • force directory security mode

    +

    • security mask
    • force security mode
    • directory security mask
    • force directory security mode

    -

    Once a user clicks OK to apply the - permissions Samba maps the given permissions into a user/group/world - r/w/x triplet set, and then will check the changed permissions for a +

    Once a user clicks on OK to apply the + permissions, Samba maps the given permissions into a user/group/world + r/w/x triplet set, and then checks the changed permissions for a file against the bits set in the - security mask parameter. Any bits that - were changed that are not set to '1' in this parameter are left alone - in the file permissions.

    Essentially, zero bits in the security mask - mask may be treated as a set of bits the user is not + security mask parameter. Any bits that + were changed that are not set to “1” in this parameter are left alone + in the file permissions.

    Essentially, zero bits in the security mask + may be treated as a set of bits the user is not allowed to change, and one bits are those the user is allowed to change. -

    If not set explicitly this parameter is set to the same value as - the create mask parameter. To allow a user to modify all the - user/group/world permissions on a file, set this parameter - to 0777.

    Next Samba checks the changed permissions for a file against - the bits set in the - force security mode parameter. Any bits - that were changed that correspond to bits set to '1' in this parameter - are forced to be set.

    Essentially, bits set in the force security mode - parameter may be treated as a set of bits that, when - modifying security on a file, the user has always set to be 'on'.

    If not set explicitly this parameter is set to the same value - as the force create mode parameter. +

    If not explicitly set, this parameter defaults to the same value as + the create mask parameter. To allow a user to modify all the + user/group/world permissions on a file, set this parameter to 0777. +

    Next Samba checks the changed permissions for a file against the bits set in the + force security mode parameter. Any bits + that were changed that correspond to bits set to “1” in this parameter + are forced to be set.

    Essentially, bits set in the force security mode parameter + may be treated as a set of bits that, when modifying security on a file, the user has always set to be “on”.

    If not explicitly set, this parameter defaults to the same value + as the force create mode parameter. To allow a user to modify all the user/group/world permissions on a file - with no restrictions set this parameter to 000.

    The security mask and force + with no restrictions set this parameter to 000. The + security mask and force security mode parameters are applied to the change - request in that order.

    For a directory Samba will perform the same operations as - described above for a file except using the parameter + request in that order.

    For a directory, Samba will perform the same operations as + described above for a file except it uses the parameter directory security mask instead of security mask, and force directory security mode parameter instead of force security mode - .

    The directory security mask parameter + .

    The directory security mask parameter by default is set to the same value as the directory mask parameter and the force directory security mode parameter by default is set to the same value as - the force directory mode parameter.

    In this way Samba enforces the permission restrictions that - an administrator can set on a Samba share, whilst still allowing users + the force directory mode parameter. + In this way Samba enforces the permission restrictions that + an administrator can set on a Samba share, while still allowing users to modify the permission bits within that restriction.

    If you want to set up a share that allows users full control in modifying the permission bits on their files and directories and - doesn't force any particular bits to be set 'on', then set the following - parameters in the smb.conf file in that share specific section : -

    security mask = 0777
    force security mode = 0
    directory security mask = 0777
    force directory security mode = 0

    Interaction with the standard Samba file attribute mapping

    Note

    Samba maps some of the DOS attribute bits (such as "read - only") into the UNIX permissions of a file. This means there can + does not force any particular bits to be set “on”, then set the following + parameters in the smb.conf file in that share-specific section: +

    security mask = 0777
    force security mode = 0
    directory security mask = 0777
    force directory security mode = 0

    Interaction with the Standard Samba File Attribute Mapping

    Note

    Samba maps some of the DOS attribute bits (such as “read + only”) into the UNIX permissions of a file. This means there can be a conflict between the permission bits set via the security dialog and the permission bits set by the file attribute mapping. -

    One way this can show up is if a file has no UNIX read access - for the owner it will show up as "read only" in the standard - file attributes tabbed dialog. Unfortunately this dialog is - the same one that contains the security info in another tab.

    What this can mean is that if the owner changes the permissions - to allow themselves read access using the security dialog, clicks +

    If a file has no UNIX read access for the owner, it will show up + as “read only” in the standard file attributes tabbed dialog. + Unfortunately, this dialog is the same one that contains the security information + in another tab.

    What this can mean is that if the owner changes the permissions + to allow himself read access using the security dialog, clicks on OK to get back to the standard attributes tab - dialog, and then clicks OK on that dialog, then + dialog, and clicks on OK on that dialog, then NT will set the file permissions back to read-only (as that is what the attributes still say in the dialog). This means that after setting - permissions and clicking OK to get back to the - attributes dialog you should always hit Cancel + permissions and clicking on OK to get back to the + attributes dialog, you should always press Cancel rather than OK to ensure that your changes - are not overridden.

    Common Errors

    -File, Directory and Share access problems are very common on the mailing list. The following + are not overridden.

    Common Errors

    +File, directory and share access problems are common on the mailing list. The following are examples taken from the mailing list in recent times. -

    Users can not write to a public share

    +

    Users Cannot Write to a Public Share

    - We are facing some troubles with file / directory permissions. I can log on the domain as admin user(root), - and there's a public share, on which everyone needs to have permission to create / modify files, but only - root can change the file, no one else can. We need to constantly go to server to + We are facing some troubles with file/directory permissions. I can log on the domain as admin user(root), + and there's a public share on which everyone needs to have permission to create/modify files, but only + root can change the file, no one else can. We need to constantly go to the server to chgrp -R users * and chown -R nobody * to allow others users to change the file.

    - There are many ways to solve this problem, here are a few hints: + There are many ways to solve this problem and here are a few hints:

    1. - Go to the top of the directory that is shared + Go to the top of the directory that is shared.

    2. Set the ownership to what ever public owner and group you want

      @@ -4597,7 +4909,7 @@ are examples taken from the mailing list in recent times.
       $ find 'directory_name' -type f -exec chown user.group {}\;
       

      Note

      - The above will set the 'sticky bit' on all directories. Read your + The above will set the sticky bit on all directories. Read your UNIX/Linux man page on what that does. It causes the OS to assign to all files created in the directories the ownership of the directory. @@ -4607,10 +4919,13 @@ are examples taken from the mailing list in recent times.

       $ chown jack.engr /foodbar
       

      -

      Note

      This is the same as doing:

      +			

      Note

      +

      This is the same as doing:

      +

       $ chown jack /foodbar
       $ chgrp engr /foodbar
      -
    3. Now do: +

      +

  • Now type:

     $ chmod 6775 /foodbar
    @@ -4621,7 +4936,7 @@ are examples taken from the mailing list in recent times.
     

     drwsrwsr-x  2 jack  engr    48 2003-02-04 09:55 foodbar
     

    -

  • Now do: +

  • Now type:

     $ su - jill
     $ cd /foodbar
    @@ -4638,127 +4953,128 @@ drwsrwsr-x  2 jack  engr    48 2003-02-04 09:55 foodbar
     		Now in your smb.conf for the share add:
     		

    force create mode = 0775
    force direcrtory mode = 6775

    Note

    - The above are only needed if your users are not members of the group - you have used. ie: Within the OS do not have write permission on the directory. + These procedures are needed only if your users are not members of the group + you have used. That is if within the OS do not have write permission on the directory.

    An alternative is to set in the smb.conf entry for the share:

    force user = jack
    force group = engr

    -

  • I have set force user but Samba still makes root the owner of all the files I touch!

    - When you have a user in admin users, samba will always do file operations for - this user as root, even if force user has been set. -

    MS Word with Samba changes owner of file

    - Question:When userB saves a word document that is owned by userA the updated file is now owned by userB. +

    File Operations Done as root with force user Set

    + When you have a user in admin users, Samba will always do file operations for + this user as root, even if force user has been set. +

    MS Word with Samba Changes Owner of File

    + Question:When user B saves a word document that is owned by user A the updated file is now owned by user B. Why is Samba doing this? How do I fix this?

    - Answer: Word does the following when you modify/change a Word document: Word Creates a NEW document with + Answer: Word does the following when you modify/change a Word document: MS Word creates a NEW document with a temporary name, Word then closes the old document and deletes it, Word then renames the new document to the original document name. - There is NO mechanism by which Samba CAN IN ANY WAY know that the new document really should be owned by the owners - of the original file. Samba has no way of knowing that the file will be renamed by MS Word. As far as Samba is able + There is no mechanism by which Samba can in any way know that the new document really should be owned by the owners + of the original file. Samba has no way of knowing that the file will be renamed by MS Word. As far as Samba is able to tell, the file that gets created is a NEW file, not one that the application (Word) is updating.

    There is a work-around to solve the permissions problem. That work-around involves understanding how you can manage file - system behaviour from within the smb.conf file, as well as understanding how Unix file systems work. Set on the directory - in which you are changing word documents: chmod g+s 'directory_name' This ensures that all files will - be created with the group that owns the directory. In smb.conf share declaration section set: + system behavior from within the smb.conf file, as well as understanding how UNIX file systems work. Set on the directory + in which you are changing Word documents: chmod g+s `directory_name' This ensures that all files will + be created with the group that owns the directory. In smb.conf share declaration section set:

    force create mode = 0660
    force directory mode = 0770

    These two settings will ensure that all directories and files that get created in the share will be read/writable by the owner and group set on the directory itself. -

    Chapter 14. File and Record Locking

    Jeremy Allison

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Eric Roseme

    HP Oplocks Usage Recommendations Whitepaper

    -One area which causes trouble for many network administrators is locking. -The extent of the problem is readily evident from searches over the internet. -

    Features and Benefits

    +

    Chapter 14. File and Record Locking

    Jeremy Allison

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Eric Roseme

    HP Oplocks Usage Recommendations Whitepaper

    +One area that causes trouble for many network administrators is locking. +The extent of the problem is readily evident from searches over the Internet. +

    Features and Benefits

    Samba provides all the same locking semantics that MS Windows clients expect -and that MS Windows NT4 / 200x servers provide also. +and that MS Windows NT4/200x servers also provide.

    The term locking has exceptionally broad meaning and covers a range of functions that are all categorized under this one term.

    Opportunistic locking is a desirable feature when it can enhance the -perceived performance of applications on a networked client. However, the -opportunistic locking protocol is not robust, and therefore can -encounter problems when invoked beyond a simplistic configuration, or -on extended, slow, or faulty networks. In these cases, operating +perceived performance of applications on a networked client. However, the +opportunistic locking protocol is not robust and, therefore, can +encounter problems when invoked beyond a simplistic configuration or +on extended slow or faulty networks. In these cases, operating system management of opportunistic locking and/or recovering from repetitive errors can offset the perceived performance advantage that it is intended to provide.

    The MS Windows network administrator needs to be aware that file and record -locking semantics (behaviour) can be controlled either in Samba or by way of registry +locking semantics (behavior) can be controlled either in Samba or by way of registry settings on the MS Windows client.

    Note

    -Sometimes it is necessary to disable locking control settings BOTH on the Samba +Sometimes it is necessary to disable locking control settings on both the Samba server as well as on each MS Windows client! -

    Discussion

    -There are two types of locking which need to be performed by a SMB server. -The first is record locking which allows a client to lock -a range of bytes in a open file. The second is the deny modes +

    Discussion

    +There are two types of locking that need to be performed by an SMB server. +The first is record locking that allows a client to lock +a range of bytes in a open file. The second is the deny modes that are specified when a file is open.

    Record locking semantics under UNIX are very different from record locking under -Windows. Versions of Samba before 2.2 have tried to use the native fcntl() unix +Windows. Versions of Samba before 2.2 have tried to use the native fcntl() UNIX system call to implement proper record locking between different Samba clients. -This can not be fully correct due to several reasons. The simplest is the fact +This cannot be fully correct for several reasons. The simplest is the fact that a Windows client is allowed to lock a byte range up to 2^32 or 2^64, -depending on the client OS. The unix locking only supports byte ranges up to 2^31. +depending on the client OS. The UNIX locking only supports byte ranges up to 2^31. So it is not possible to correctly satisfy a lock request above 2^31. There are many more differences, too many to be listed here.

    Samba 2.2 and above implements record locking completely independent of the -underlying unix system. If a byte range lock that the client requests happens -to fall into the range 0-2^31, Samba hands this request down to the UNIX system. -All other locks can not be seen by unix anyway. -

    -Strictly an SMB server should check for locks before every read and write call on -a file. Unfortunately with the way fcntl() works this can be slow and may over-stress -the rpc.lockd. It is also almost always unnecessary as clients are supposed to -independently make locking calls before reads and writes anyway if locking is -important to them. By default Samba only makes locking calls when explicitly asked -to by a client, but if you set strict locking = yes then it -will make lock checking calls on every read and write. -

    -You can also disable byte range locking completely using locking = no. -This is useful for those shares that don't support locking or don't need it -(such as cdroms). In this case Samba fakes the return codes of locking calls to -tell clients that everything is OK. +underlying UNIX system. If a byte range lock that the client requests happens +to fall into the range of 0-2^31, Samba hands this request down to the UNIX system. +All other locks cannot be seen by UNIX, anyway. +

    +Strictly speaking, an SMB server should check for locks before every read and write call on +a file. Unfortunately with the way fcntl() works, this can be slow and may overstress +the rpc.lockd. This is almost always unnecessary as clients are supposed to +independently make locking calls before reads and writes if locking is +important to them. By default, Samba only makes locking calls when explicitly asked +to by a client, but if you set strict locking = yes, it +will make lock checking calls on every read and write call. +

    +You can also disable byte range locking completely by using +locking = no. +This is useful for those shares that do not support locking or do not need it +(such as CDROMs). In this case, Samba fakes the return codes of locking calls to +tell clients that everything is okay.

    The second class of locking is the deny modes. These are set by an application when it opens a file to determine what types of access should be allowed simultaneously with its open. A client may ask for DENY_NONE, DENY_READ, -DENY_WRITE or DENY_ALL. There are also special compatibility +DENY_WRITE, or DENY_ALL. There are also special compatibility modes called DENY_FCB and DENY_DOS. -

    Opportunistic Locking Overview

    +

    Opportunistic Locking Overview

    Opportunistic locking (Oplocks) is invoked by the Windows file system -(as opposed to an API) via registry entries (on the server AND client) +(as opposed to an API) via registry entries (on the server and the client) for the purpose of enhancing network performance when accessing a file residing on a server. Performance is enhanced by caching the file -locally on the client which allows: +locally on the client that allows:

    Read-ahead:

    - The client reads the local copy of the file, eliminating network latency + The client reads the local copy of the file, eliminating network latency.

    Write caching:

    - The client writes to the local copy of the file, eliminating network latency + The client writes to the local copy of the file, eliminating network latency.

    Lock caching:

    - The client caches application locks locally, eliminating network latency + The client caches application locks locally, eliminating network latency.

    The performance enhancement of oplocks is due to the opportunity of -exclusive access to the file - even if it is opened with deny-none - +exclusive access to the file even if it is opened with deny-none because Windows monitors the file's status for concurrent access from other processes. -

    Windows defines 4 kinds of Oplocks:

    Level1 Oplock:

    +

    Windows defines 4 kinds of Oplocks:

    Level1 Oplock

    The redirector sees that the file was opened with deny none (allowing concurrent access), verifies that no other process is accessing the file, checks that oplocks are enabled, then grants deny-all/read-write/exclusive - access to the file. The client now performs + access to the file. The client now performs operations on the cached local file.

    If a second process attempts to open the file, the open - is deferred while the redirector "breaks" the original - oplock. The oplock break signals the caching client to + is deferred while the redirector “breaks” the original + oplock. The oplock break signals the caching client to write the local file back to the server, flush the - local locks, and discard read-ahead data. The break is + local locks and discard read-ahead data. The break is then complete, the deferred open is granted, and the multiple processes can enjoy concurrent file access as dictated by mandatory or byte-range locking options. @@ -4766,130 +5082,130 @@ other processes. file with a share mode other than deny-none, then the second process is granted limited or no access, despite the oplock break. -

    Level2 Oplock:

    - Performs like a level1 oplock, except caching is only +

    Level2 Oplock

    + Performs like a Level1 oplock, except caching is only operative for reads. All other operations are performed on the server disk copy of the file. -

    Filter Oplock:

    - Does not allow write or delete file access -

    Batch Oplock:

    - Manipulates file openings and closings - allows caching - of file attributes +

    Filter Oplock

    + Does not allow write or delete file access. +

    Batch Oplock

    + Manipulates file openings and closings and allows caching + of file attributes.

    An important detail is that oplocks are invoked by the file system, not -an application API. Therefore, an application can close an oplocked -file, but the file system does not relinquish the oplock. When the +an application API. Therefore, an application can close an oplocked +file, but the file system does not relinquish the oplock. When the oplock break is issued, the file system then simply closes the file in preparation for the subsequent open by the second process.

    -Opportunistic Locking is actually an improper name for this feature. +Opportunistic locking is actually an improper name for this feature. The true benefit of this feature is client-side data caching, and oplocks is merely a notification mechanism for writing data back to the -networked storage disk. The limitation of opportunistic locking is the +networked storage disk. The limitation of opportunistic locking is the reliability of the mechanism to process an oplock break (notification) -between the server and the caching client. If this exchange is faulty -(usually due to timing out for any number of reasons) then the +between the server and the caching client. If this exchange is faulty +(usually due to timing out for any number of reasons), then the client-side caching benefit is negated.

    The actual decision that a user or administrator should consider is -whether it is sensible to share amongst multiple users data that will -be cached locally on a client. In many cases the answer is no. +whether it is sensible to share among multiple users data that will +be cached locally on a client. In many cases the answer is no. Deciding when to cache or not cache data is the real question, and thus -"opportunistic locking" should be treated as a toggle for client-side -caching. Turn it "ON" when client-side caching is desirable and -reliable. Turn it "OFF" when client-side caching is redundant, -unreliable, or counter-productive. +“opportunistic locking” should be treated as a toggle for client-side +caching. Turn it “on” when client-side caching is desirable and +reliable. Turn it “off” when client-side caching is redundant, +unreliable or counter-productive.

    -Opportunistic locking is by default set to "on" by Samba on all +Opportunistic locking is by default set to “on” by Samba on all configured shares, so careful attention should be given to each case to determine if the potential benefit is worth the potential for delays. The following recommendations will help to characterize the environment where opportunistic locking may be effectively configured.

    -Windows Opportunistic Locking is a lightweight performance-enhancing -feature. It is not a robust and reliable protocol. Every -implementation of Opportunistic Locking should be evaluated as a -tradeoff between perceived performance and reliability. Reliability -decreases as each successive rule above is not enforced. Consider a +Windows opportunistic locking is a lightweight performance-enhancing +feature. It is not a robust and reliable protocol. Every +implementation of opportunistic locking should be evaluated as a +tradeoff between perceived performance and reliability. Reliability +decreases as each successive rule above is not enforced. Consider a share with oplocks enabled, over a wide area network, to a client on a South Pacific atoll, on a high-availability server, serving a -mission-critical multi-user corporate database, during a tropical -storm. This configuration will likely encounter problems with oplocks. +mission-critical multi-user corporate database during a tropical +storm. This configuration will likely encounter problems with oplocks.

    Oplocks can be beneficial to perceived client performance when treated -as a configuration toggle for client-side data caching. If the data +as a configuration toggle for client-side data caching. If the data caching is likely to be interrupted, then oplock usage should be -reviewed. Samba enables opportunistic locking by default on all -shares. Careful attention should be given to the client usage of -shared data on the server, the server network reliability, and the +reviewed. Samba enables opportunistic locking by default on all +shares. Careful attention should be given to the client usage of +shared data on the server, the server network reliability and the opportunistic locking configuration of each share. -n mission critical high availability environments, data integrity is -often a priority. Complex and expensive configurations are implemented +In mission critical high availability environments, data integrity is +often a priority. Complex and expensive configurations are implemented to ensure that if a client loses connectivity with a file server, a failover replacement will be available immediately to provide continuous data availability.

    Windows client failover behavior is more at risk of application -interruption than other platforms because it is dependant upon an -established TCP transport connection. If the connection is interrupted -- as in a file server failover - a new session must be established. +interruption than other platforms because it is dependent upon an +established TCP transport connection. If the connection is interrupted + as in a file server failover a new session must be established. It is rare for Windows client applications to be coded to recover -correctly from a transport connection loss, therefore most applications -will experience some sort of interruption - at worst, abort and +correctly from a transport connection loss, therefore, most applications +will experience some sort of interruption at worst, abort and require restarting.

    If a client session has been caching writes and reads locally due to opportunistic locking, it is likely that the data will be lost when the -application restarts, or recovers from the TCP interrupt. When the TCP -connection drops, the client state is lost. When the file server -recovers, an oplock break is not sent to the client. In this case, the -work from the prior session is lost. Observing this scenario with -oplocks disabled, and the client was writing data to the file server -real-time, then the failover will provide the data on disk as it +application restarts or recovers from the TCP interrupt. When the TCP +connection drops, the client state is lost. When the file server +recovers, an oplock break is not sent to the client. In this case, the +work from the prior session is lost. Observing this scenario with +oplocks disabled and with the client writing data to the file server +real-time, the failover will provide the data on disk as it existed at the time of the disconnect.

    -In mission critical high availability environments, careful attention -should be given to opportunistic locking. Ideally, comprehensive +In mission-critical high-availability environments, careful attention +should be given to opportunistic locking. Ideally, comprehensive testing should be done with all affected applications with oplocks enabled and disabled. -

    Exclusively Accessed Shares

    +

    Exclusively Accessed Shares

    Opportunistic locking is most effective when it is confined to shares that are exclusively accessed by a single user, or by only one user at -a time. Because the true value of opportunistic locking is the local +a time. Because the true value of opportunistic locking is the local client caching of data, any operation that interrupts the caching mechanism will cause a delay.

    Home directories are the most obvious examples of where the performance benefit of opportunistic locking can be safely realized. -

    Multiple-Accessed Shares or Files

    +

    Multiple-Accessed Shares or Files

    As each additional user accesses a file in a share with opportunistic locking enabled, the potential for delays and resulting perceived poor -performance increases. When multiple users are accessing a file on a +performance increases. When multiple users are accessing a file on a share that has oplocks enabled, the management impact of sending and -receiving oplock breaks, and the resulting latency while other clients -wait for the caching client to flush data, offset the performance gains +receiving oplock breaks and the resulting latency while other clients +wait for the caching client to flush data offset the performance gains of the caching user.

    As each additional client attempts to access a file with oplocks set, the potential performance improvement is negated and eventually results in a performance bottleneck. -

    UNIX or NFS Client Accessed Files

    +

    UNIX or NFS Client-Accessed Files

    Local UNIX and NFS clients access files without a mandatory -file locking mechanism. Thus, these client platforms are incapable of +file-locking mechanism. Thus, these client platforms are incapable of initiating an oplock break request from the server to a Windows client that has a file cached. Local UNIX or NFS file access can therefore write to a file that has been cached by a Windows client, which exposes the file to likely data corruption.

    If files are shared between Windows clients, and either local UNIX -or NFS users, then turn opportunistic locking off. -

    Slow and/or Unreliable Networks

    +or NFS users, turn opportunistic locking off. +

    Slow and/or Unreliable Networks

    The biggest potential performance improvement for opportunistic locking occurs when the client-side caching of reads and writes delivers the most differential over sending those reads and writes over the wire. This is most likely to occur when the network is extremely slow, -congested, or distributed (as in a WAN). However, network latency also -has a very high impact on the reliability of the oplock break +congested, or distributed (as in a WAN). However, network latency also +has a high impact on the reliability of the oplock break mechanism, and thus increases the likelihood of encountering oplock problems that more than offset the potential perceived performance gain. Of course, if an oplock break never has to be sent, then this is @@ -4898,112 +5214,112 @@ the most advantageous scenario to utilize opportunistic locking. If the network is slow, unreliable, or a WAN, then do not configure opportunistic locking if there is any chance of multiple users regularly opening the same file. -

    Multi-User Databases

    -Multi-user databases clearly pose a risk due to their very nature - +

    Multi-User Databases

    +Multi-user databases clearly pose a risk due to their very nature they are typically heavily accessed by numerous users at random -intervals. Placing a multi-user database on a share with opportunistic +intervals. Placing a multi-user database on a share with opportunistic locking enabled will likely result in a locking management bottleneck -on the Samba server. Whether the database application is developed +on the Samba server. Whether the database application is developed in-house or a commercially available product, ensure that the share has opportunistic locking disabled. -

    PDM Data Shares

    -Process Data Management (PDM) applications such as IMAN, Enovia, and -Clearcase, are increasing in usage with Windows client platforms, and -therefore SMB data stores. PDM applications manage multi-user -environments for critical data security and access. The typical PDM +

    PDM Data Shares

    +Process Data Management (PDM) applications such as IMAN, Enovia and +Clearcase are increasing in usage with Windows client platforms, and +therefore SMB datastores. PDM applications manage multi-user +environments for critical data security and access. The typical PDM environment is usually associated with sophisticated client design -applications that will load data locally as demanded. In addition, the +applications that will load data locally as demanded. In addition, the PDM application will usually monitor the data-state of each client. In this case, client-side data caching is best left to the local -application and PDM server to negotiate and maintain. It is +application and PDM server to negotiate and maintain. It is appropriate to eliminate the client OS from any caching tasks, and the server from any oplock management, by disabling opportunistic locking on the share. -

    Beware of Force User

    -Samba includes an smb.conf parameter called force user that changes +

    Beware of Force User

    +Samba includes an smb.conf parameter called force user that changes the user accessing a share from the incoming user to whatever user is -defined by the smb.conf variable. If opportunistic locking is enabled +defined by the smb.conf variable. If opportunistic locking is enabled on a share, the change in user access causes an oplock break to be sent -to the client, even if the user has not explicitly loaded a file. In +to the client, even if the user has not explicitly loaded a file. In cases where the network is slow or unreliable, an oplock break can -become lost without the user even accessing a file. This can cause +become lost without the user even accessing a file. This can cause apparent performance degradation as the client continually reconnects to overcome the lost oplock break.

    Avoid the combination of the following:

    • - force user in the smb.conf share configuration. + force user in the smb.conf share configuration.

    • Slow or unreliable networks

    • - Opportunistic Locking Enabled -

    Advanced Samba Opportunistic Locking Parameters

    + Opportunistic locking enabled +

    Advanced Samba Opportunistic Locking Parameters

    Samba provides opportunistic locking parameters that allow the administrator to adjust various properties of the oplock mechanism to -account for timing and usage levels. These parameters provide good +account for timing and usage levels. These parameters provide good versatility for implementing oplocks in environments where they would -likely cause problems. The parameters are: -oplock break wait time, -oplock contention limit. +likely cause problems. The parameters are: +oplock break wait time, +oplock contention limit.

    -For most users, administrators, and environments, if these parameters +For most users, administrators and environments, if these parameters are required, then the better option is to simply turn oplocks off. -The samba SWAT help text for both parameters reads "DO NOT CHANGE THIS -PARAMETER UNLESS YOU HAVE READ AND UNDERSTOOD THE SAMBA OPLOCK CODE." +The Samba SWAT help text for both parameters reads: “Do not change +this parameter unless you have read and understood the Samba oplock code.” This is good advice. -

    Mission Critical High Availability

    -In mission critical high availability environments, data integrity is -often a priority. Complex and expensive configurations are implemented +

    Mission-Critical High-Availability

    +In mission-critical high-availability environments, data integrity is +often a priority. Complex and expensive configurations are implemented to ensure that if a client loses connectivity with a file server, a failover replacement will be available immediately to provide continuous data availability.

    Windows client failover behavior is more at risk of application interruption than other platforms because it is dependant upon an -established TCP transport connection. If the connection is interrupted -- as in a file server failover - a new session must be established. +established TCP transport connection. If the connection is interrupted + as in a file server failover a new session must be established. It is rare for Windows client applications to be coded to recover -correctly from a transport connection loss, therefore most applications -will experience some sort of interruption - at worst, abort and +correctly from a transport connection loss, therefore, most applications +will experience some sort of interruption at worst, abort and require restarting.

    If a client session has been caching writes and reads locally due to opportunistic locking, it is likely that the data will be lost when the application restarts, or recovers from the TCP interrupt. When the TCP -connection drops, the client state is lost. When the file server -recovers, an oplock break is not sent to the client. In this case, the -work from the prior session is lost. Observing this scenario with +connection drops, the client state is lost. When the file server +recovers, an oplock break is not sent to the client. In this case, the +work from the prior session is lost. Observing this scenario with oplocks disabled, and the client was writing data to the file server real-time, then the failover will provide the data on disk as it existed at the time of the disconnect.

    -In mission critical high availability environments, careful attention -should be given to opportunistic locking. Ideally, comprehensive -testing should be done with all affected applications with oplocks +In mission-critical high-availability environments, careful attention +should be given to opportunistic locking. Ideally, comprehensive +testing should be done with all effected applications with oplocks enabled and disabled. -

    Samba Opportunistic Locking Control

    -Opportunistic Locking is a unique Windows file locking feature. It is +

    Samba Opportunistic Locking Control

    +Opportunistic locking is a unique Windows file locking feature. It is not really file locking, but is included in most discussions of Windows file locking, so is considered a de facto locking feature. -Opportunistic Locking is actually part of the Windows client file -caching mechanism. It is not a particularly robust or reliable feature +Opportunistic locking is actually part of the Windows client file +caching mechanism. It is not a particularly robust or reliable feature when implemented on the variety of customized networks that exist in enterprise computing.

    -Like Windows, Samba implements Opportunistic Locking as a server-side -component of the client caching mechanism. Because of the lightweight +Like Windows, Samba implements opportunistic locking as a server-side +component of the client caching mechanism. Because of the lightweight nature of the Windows feature design, effective configuration of -Opportunistic Locking requires a good understanding of its limitations, +opportunistic locking requires a good understanding of its limitations, and then applying that understanding when configuring data access for each particular customized network and client usage state.

    Opportunistic locking essentially means that the client is allowed to download and cache a file on their hard drive while making changes; if a second client wants to access the -file, the first client receives a break and must synchronise the file back to the server. +file, the first client receives a break and must synchronize the file back to the server. This can give significant performance gains in some cases; some programs insist on -synchronising the contents of the entire file back to the server for a single change. +synchronizing the contents of the entire file back to the server for a single change.

    -Level1 Oplocks (aka just plain "oplocks") is another term for opportunistic locking. +Level1 Oplocks (also known as just plain “oplocks”) is another term for opportunistic locking.

    Level2 Oplocks provides opportunistic locking for a file that will be treated as read only. Typically this is used on files that are read-only or @@ -5011,16 +5327,16 @@ on files that the client has no initial intention to write to at time of opening

    Kernel Oplocks are essentially a method that allows the Linux kernel to co-exist with Samba's oplocked files, although this has provided better integration of MS Windows network -file locking with the under lying OS, SGI IRIX and Linux are the only two OS's that are -oplock aware at this time. +file locking with the underlying OS, SGI IRIX and Linux are the only two OSs that are +oplock-aware at this time.

    Unless your system supports kernel oplocks, you should disable oplocks if you are accessing the same files from both UNIX/Linux and SMB clients. Regardless, oplocks should always be disabled if you are sharing a database file (e.g., Microsoft Access) between -multiple clients, as any break the first client receives will affect synchronisation of +multiple clients, as any break the first client receives will affect synchronization of the entire file (not just the single record), which will result in a noticeable performance impairment and, more likely, problems accessing the database in the first place. Notably, -Microsoft Outlook's personal folders (*.pst) react very badly to oplocks. If in doubt, +Microsoft Outlook's personal folders (*.pst) react quite badly to oplocks. If in doubt, disable oplocks and tune your system from that point.

    If client-side caching is desirable and reliable on your network, you will benefit from @@ -5031,14 +5347,14 @@ of your client sending oplock breaks and will instead want to disable oplocks fo

    Another factor to consider is the perceived performance of file access. If oplocks provide no measurable speed benefit on your network, it might not be worth the hassle of dealing with them. -

    Example Configuration

    -In the following we examine two distinct aspects of Samba locking controls. -

    Disabling Oplocks

    +

    Example Configuration

    +In the following section we examine two distinct aspects of Samba locking controls. +

    Disabling Oplocks

    You can disable oplocks on a per-share basis with the following:

    [acctdata]
    oplocks = False
    level2 oplocks = False

    -The default oplock type is Level1. Level2 Oplocks are enabled on a per-share basis +The default oplock type is Level1. Level2 oplocks are enabled on a per-share basis in the smb.conf file.

    Alternately, you could disable oplocks on a per-file basis within the share: @@ -5046,69 +5362,67 @@ Alternately, you could disable oplocks on a per-file basis within the share:

    veto oplock files = /*.mdb/*.MDB/*.dbf/*.DBF/

    If you are experiencing problems with oplocks as apparent from Samba's log entries, -you may want to play it safe and disable oplocks and level2 oplocks. -

    Disabling Kernel OpLocks

    -Kernel OpLocks is an smb.conf parameter that notifies Samba (if +you may want to play it safe and disable oplocks and Level2 oplocks. +

    Disabling Kernel Oplocks

    +Kernel oplocks is an smb.conf parameter that notifies Samba (if the UNIX kernel has the capability to send a Windows client an oplock break) when a UNIX process is attempting to open the file that is -cached. This parameter addresses sharing files between UNIX and -Windows with Oplocks enabled on the Samba server: the UNIX process +cached. This parameter addresses sharing files between UNIX and +Windows with oplocks enabled on the Samba server: the UNIX process can open the file that is Oplocked (cached) by the Windows client and the smbd process will not send an oplock break, which exposes the file -to the risk of data corruption. If the UNIX kernel has the ability to +to the risk of data corruption. If the UNIX kernel has the ability to send an oplock break, then the kernel oplocks parameter enables Samba -to send the oplock break. Kernel oplocks are enabled on a per-server +to send the oplock break. Kernel oplocks are enabled on a per-server basis in the smb.conf file.

    -

    kernel oplocks = yes

    -The default is "no". +

    kernel oplocks = yes

    +The default is no.

    -Veto OpLocks is an smb.conf parameter that identifies specific files for -which Oplocks are disabled. When a Windows client opens a file that +Veto opLocks is an smb.conf parameter that identifies specific files for +which oplocks are disabled. When a Windows client opens a file that has been configured for veto oplocks, the client will not be granted the oplock, and all operations will be executed on the original file on -disk instead of a client-cached file copy. By explicitly identifying -files that are shared with UNIX processes, and disabling oplocks for +disk instead of a client-cached file copy. By explicitly identifying +files that are shared with UNIX processes and disabling oplocks for those files, the server-wide Oplock configuration can be enabled to allow Windows clients to utilize the performance benefit of file -caching without the risk of data corruption. Veto Oplocks can be +caching without the risk of data corruption. Veto Oplocks can be enabled on a per-share basis, or globally for the entire server, in the -smb.conf file: +smb.conf file as shown in .

    -

    Example 14.1. Share with some files oplocked

    [global]
    veto oplock files = /filename.htm/*.txt/
    [share_name]
    veto oplock files = /*.exe/filename.ext/

    +

    Example 14.1. Share with some files oplocked

    [global]
    veto oplock files = /filename.htm/*.txt/
    [share_name]
    veto oplock files = /*.exe/filename.ext/

    - oplock break wait time is an smb.conf parameter that adjusts the time -interval for Samba to reply to an oplock break request. Samba -recommends "DO NOT CHANGE THIS PARAMETER UNLESS YOU HAVE READ AND -UNDERSTOOD THE SAMBA OPLOCK CODE." Oplock Break Wait Time can only be -configured globally in the smb.conf file: +oplock break wait time is an smb.conf parameter +that adjusts the time interval for Samba to reply to an oplock break request. Samba recommends: +“Do not change this parameter unless you have read and understood the Samba oplock code.” +Oplock break Wait Time can only be configured globally in the smb.conf file as shown below.

    oplock break wait time = 0 (default)

    Oplock break contention limit is an smb.conf parameter that limits the response of the Samba server to grant an oplock if the configured -number of contending clients reaches the limit specified by the -parameter. Samba recommends "DO NOT CHANGE THIS PARAMETER UNLESS YOU -HAVE READ AND UNDERSTOOD THE SAMBA OPLOCK CODE." Oplock Break -Contention Limit can be enable on a per-share basis, or globally for -the entire server, in the smb.conf file: -

    -

    Example 14.2. 

    [global]
    oplock break contention limit = 2 (default)
    [share_name]
    oplock break contention limit = 2 (default)

    -

    MS Windows Opportunistic Locking and Caching Controls

    +number of contending clients reaches the limit specified by the parameter. Samba recommends +“Do not change this parameter unless you have read and understood the Samba oplock code.” +Oplock break Contention Limit can be enable on a per-share basis, or globally for +the entire server, in the smb.conf file as shown in . +

    +

    Example 14.2. Configuration with oplock break contention limit

    [global]
    oplock break contention limit = 2 (default)
    [share_name]
    oplock break contention limit = 2 (default)

    +

    MS Windows Opportunistic Locking and Caching Controls

    There is a known issue when running applications (like Norton Anti-Virus) on a Windows 2000/ XP workstation computer that can affect any application attempting to access shared database files across a network. This is a result of a default setting configured in the Windows 2000/XP -operating system known as Opportunistic Locking. When a workstation +operating system known as opportunistic locking. When a workstation attempts to access shared data files located on another Windows 2000/XP computer, the Windows 2000/XP operating system will attempt to increase performance by locking the files and caching information locally. When this occurs, the application is unable to -properly function, which results in an Access Denied +properly function, which results in an “Access Denied” error message being displayed during network operations.

    All Windows operating systems in the NT family that act as database servers for data files (meaning that data files are stored there and accessed by other Windows PCs) may need to have opportunistic locking disabled in order to minimize the risk of data file corruption. -This includes Windows 9x/Me, Windows NT, Windows 200x and Windows XP. +This includes Windows 9x/Me, Windows NT, Windows 200x, and Windows XP.

    If you are using a Windows NT family workstation in place of a server, you must also disable opportunistic locking (oplocks) on that workstation. For example, if you use a @@ -5120,7 +5434,7 @@ The major difference is the location in the Windows registry where the values fo oplocks are entered. Instead of the LanManServer location, the LanManWorkstation location may be used.

    -You can verify (or change or add, if necessary) this Registry value using the Windows +You can verify (change or add, if necessary) this registry value using the Windows Registry Editor. When you change this registry value, you will have to reboot the PC to ensure that the new setting goes into effect.

    @@ -5158,75 +5472,75 @@ request opportunistic locks on a remote file. To disable oplocks, the value of The EnableOplocks value configures Windows-based servers (including Workstations sharing files) to allow or deny opportunistic locks on local files.

    -To force closure of open oplocks on close or program exit EnableOpLockForceClose must be set to 1. +To force closure of open oplocks on close or program exit, EnableOpLockForceClose must be set to 1.

    -An illustration of how level II oplocks work: +An illustration of how Level2 oplocks work:

    • - Station 1 opens the file, requesting oplock. + Station 1 opens the file requesting oplock.

    • Since no other station has the file open, the server grants station 1 exclusive oplock.

    • - Station 2 opens the file, requesting oplock. + Station 2 opens the file requesting oplock.

    • - Since station 1 has not yet written to the file, the server asks station 1 to Break - to Level II Oplock. + Since station 1 has not yet written to the file, the server asks station 1 to break + to Level2 oplock.

    • Station 1 complies by flushing locally buffered lock information to the server.

    • - Station 1 informs the server that it has Broken to Level II Oplock (alternatively, + Station 1 informs the server that it has Broken to Level2 Oplock (alternately, station 1 could have closed the file).

    • - The server responds to station 2's open request, granting it level II oplock. - Other stations can likewise open the file and obtain level II oplock. + The server responds to station 2's open request, granting it Level2 oplock. + Other stations can likewise open the file and obtain Level2 oplock.

    • Station 2 (or any station that has the file open) sends a write request SMB. The server returns the write response.

    • - The server asks all stations that have the file open to Break to None, meaning no + The server asks all stations that have the file open to break to none, meaning no station holds any oplock on the file. Because the workstations can have no cached writes or locks at this point, they need not respond to the break-to-none advisory; all they need do is invalidate locally cashed read-ahead data. -

    Workstation Service Entries

    +	

    Workstation Service Entries

     	\HKEY_LOCAL_MACHINE\System\
     		CurrentControlSet\Services\LanmanWorkstation\Parameters
     
     	UseOpportunisticLocking   REG_DWORD   0 or 1
     	Default: 1 (true)
     

    -Indicates whether the redirector should use opportunistic-locking (oplock) performance +This indicates whether the redirector should use opportunistic-locking (oplock) performance enhancement. This parameter should be disabled only to isolate problems. -

    Server Service Entries

    +

    Server Service Entries

     	\HKEY_LOCAL_MACHINE\System\
     		CurrentControlSet\Services\LanmanServer\Parameters
     
     	EnableOplocks   REG_DWORD   0 or 1
     	Default: 1 (true)
     

    -Specifies whether the server allows clients to use oplocks on files. Oplocks are a +This specifies whether the server allows clients to use oplocks on files. Oplocks are a significant performance enhancement, but have the potential to cause lost cached -data on some networks, particularly wide-area networks. +data on some networks, particularly wide area networks.

     	MinLinkThroughput   REG_DWORD   0 to infinite bytes per second
     	Default: 0
     

    -Specifies the minimum link throughput allowed by the server before it disables +This specifies the minimum link throughput allowed by the server before it disables raw and opportunistic locks for this connection.

     	MaxLinkDelay   REG_DWORD   0 to 100,000 seconds
     	Default: 60
     

    -Specifies the maximum time allowed for a link delay. If delays exceed this number, +This specifies the maximum time allowed for a link delay. If delays exceed this number, the server disables raw I/O and opportunistic locking for this connection.

     	OplockBreakWait   REG_DWORD   10 to 180 seconds
     	Default: 35
     

    -Specifies the time that the server waits for a client to respond to an oplock break +This specifies the time that the server waits for a client to respond to an oplock break request. Smaller values can allow detection of crashed clients more quickly but can potentially cause loss of cached data. -

    Persistent Data Corruption

    +

    Persistent Data Corruption

    If you have applied all of the settings discussed in this chapter but data corruption problems -and other symptoms persist, here are some additional things to check out: +and other symptoms persist, here are some additional things to check out.

    We have credible reports from developers that faulty network hardware, such as a single faulty network card, can cause symptoms similar to read caching and data corruption. @@ -5235,398 +5549,383 @@ rebuild the data files in question. This involves creating a new data file with same definition as the file to be rebuilt and transferring the data from the old file to the new one. There are several known methods for doing this that can be found in our Knowledge Base. -

    Common Errors

    -In some sites locking problems surface as soon as a server is installed, in other sites +

    Common Errors

    +In some sites, locking problems surface as soon as a server is installed; in other sites locking problems may not surface for a long time. Almost without exception, when a locking problem does surface it will cause embarrassment and potential data corruption.

    -Over the past few years there have been a number of complaints on the samba mailing lists -that have claimed that samba caused data corruption. Three causes have been identified +Over the past few years there have been a number of complaints on the Samba mailing lists +that have claimed that Samba caused data corruption. Three causes have been identified so far:

    • Incorrect configuration of opportunistic locking (incompatible with the application - being used. This is a VERY common problem even where MS Windows NT4 or MS Windows 200x - based servers were in use. It is imperative that the software application vendors' + being used. This is a common problem even where MS Windows NT4 or MS Windows + 200x-based servers were in use. It is imperative that the software application vendors' instructions for configuration of file locking should be followed. If in doubt, disable oplocks on both the server and the client. Disabling of all forms of file caching on the MS Windows client may be necessary also.

    • - Defective network cards, cables, or HUBs / Switched. This is generally a more - prevalent factor with low cost networking hardware, though occasionally there - have been problems with incompatibilities in more up market hardware also. -

    • - There have been some random reports of samba log files being written over data - files. This has been reported by very few sites (about 5 in the past 3 years) - and all attempts to reproduce the problem have failed. The Samba-Team has been - unable to catch this happening and thus has NOT been able to isolate any particular - cause. Considering the millions of systems that use samba, for the sites that have - been affected by this as well as for the Samba-Team this is a frustrating and - a vexing challenge. If you see this type of thing happening please create a bug - report on https://bugzilla.samba.org without delay. Make sure that you give as much - information as you possibly can to help isolate the cause and to allow reproduction - of the problem (an essential step in problem isolation and correction). -

    locking.tdb error messages

    + Defective network cards, cables, or HUBs/Switched. This is generally a more + prevalent factor with low cost networking hardware, although occasionally there + have also been problems with incompatibilities in more up-market hardware. +

  • + There have been some random reports of Samba log files being written over data + files. This has been reported by very few sites (about five in the past three years) + and all attempts to reproduce the problem have failed. The Samba Team has been + unable to catch this happening and thus has not been able to isolate any particular + cause. Considering the millions of systems that use Samba, for the sites that have + been affected by this as well as for the Samba Team this is a frustrating and + a vexing challenge. If you see this type of thing happening, please create a bug + report on Samba Bugzilla without delay. + Make sure that you give as much information as you possibly can help isolate the + cause and to allow replication of the problem (an essential step in problem isolation and correction). +

  • locking.tdb Error Messages

    - We are seeing lots of errors in the samba logs like: -” -

    +	We are seeing lots of errors in the Samba logs, like:
    +
     tdb(/usr/local/samba_2.2.7/var/locks/locking.tdb): rec_read bad magic
      0x4d6f4b61 at offset=36116
    -

    -“ +

    + What do these mean? ”

    - Corrupted tdb. Stop all instances of smbd, delete locking.tdb, restart smbd. -

    Problems saving files in MS Office on Windows XP

    This is a bug in Windows XP. More information can be - found in Microsoft Knowledge Base article 812937.

    Long delays deleting files over network with XP SP1

    It sometimes takes approximately 35 seconds to delete files over the network after XP SP1 has been applied

    This is a bug in Windows XP. More information can be - found in - Microsoft Knowledge Base article 811492.

    Additional Reading

    + This error indicated a corrupted tdb. Stop all instances of smbd, delete locking.tdb, and restart smbd. +

    Problems Saving Files in MS Office on Windows XP

    This is a bug in Windows XP. More information can be + found in Microsoft Knowledge Base article 812937.

    Long Delays Deleting Files Over Network with XP SP1

    It sometimes takes approximately 35 seconds to delete files over the network after XP SP1 has been applied.

    This is a bug in Windows XP. More information can be found in + Microsoft Knowledge Base article 811492.

    Additional Reading

    You may want to check for an updated version of this white paper on our Web site from time to time. Many of our white papers are updated as information changes. For those papers, -the Last Edited date is always at the top of the paper. +the last edited date is always at the top of the paper.

    Section of the Microsoft MSDN Library on opportunistic locking:

    Opportunistic Locks, Microsoft Developer Network (MSDN), Windows Development > Windows Base Services > Files and I/O > SDK Documentation > File Storage > File Systems > About File Systems > Opportunistic Locks, Microsoft Corporation. -http://msdn.microsoft.com/library/en-us/fileio/storage_5yk3.asp +http://msdn.microsoft.com/library/en-us/fileio/storage_5yk3.asp

    -Microsoft Knowledge Base Article Q224992 "Maintaining Transactional Integrity with OPLOCKS", -Microsoft Corporation, April 1999, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q224992. + Microsoft Knowledge Base Article Q224992 “Maintaining Transactional Integrity +with OPLOCKS”, +Microsoft Corporation, April 1999, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q224992.

    -Microsoft Knowledge Base Article Q296264 "Configuring Opportunistic Locking in Windows 2000", -Microsoft Corporation, April 2001, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q296264. +Microsoft Knowledge Base Article Q296264 “Configuring Opportunistic Locking in Windows 2000”, +Microsoft Corporation, April 2001, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q296264.

    -Microsoft Knowledge Base Article Q129202 "PC Ext: Explanation of Opportunistic Locking on Windows NT", - Microsoft Corporation, April 1995, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q129202. -

    Chapter 15. Securing Samba

    Andrew Tridgell

    Samba Team

    John H. Terpstra

    Samba Team

    May 26, 2003

    Introduction

    +Microsoft Knowledge Base Article Q129202 “PC Ext: Explanation of Opportunistic Locking on Windows NT”, +Microsoft Corporation, April 1995, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q129202. +

    Chapter 15. Securing Samba

    Andrew Tridgell

    Samba Team

    John H. Terpstra

    Samba Team

    May 26, 2003

    Introduction

    This note was attached to the Samba 2.2.8 release notes as it contained an -important security fix. The information contained here applies to Samba +important security fix. The information contained here applies to Samba installations in general. -

    -A new apprentice reported for duty to the Chief Engineer of a boiler house. He said, "Here I am, -if you will show me the boiler I'll start working on it." Then engineer replied, "You're leaning -on it!" -

    -Security concerns are just like that: You need to know a little about the subject to appreciate +

    +A new apprentice reported for duty to the chief engineer of a boiler house. He said, “Here I am, +if you will show me the boiler I'll start working on it.” Then engineer replied, “You're leaning +on it!” +

    +Security concerns are just like that. You need to know a little about the subject to appreciate how obvious most of it really is. The challenge for most of us is to discover that first morsel of knowledge with which we may unlock the secrets of the masters. -

    Features and Benefits

    -There are three level at which security principals must be observed in order to render a site -at least moderately secure. These are: the perimeter firewall, the configuration of the host -server that is running Samba, and Samba itself. +

    Features and Benefits

    +There are three levels at which security principals must be observed in order to render a site +at least moderately secure. They are the perimeter firewall, the configuration of the host +server that is running Samba and Samba itself.

    Samba permits a most flexible approach to network security. As far as possible Samba implements the latest protocols to permit more secure MS Windows file and print operations.

    Samba may be secured from connections that originate from outside the local network. This may be -done using host based protection (using samba's implementation of a technology -known as "tcpwrappers", or it may be done be using interface based exclusion -so that smbd will bind only to specifically permitted interfaces. It is also -possible to set specific share or resource based exclusions, eg: on the [IPC$] +done using host-based protection (using samba's implementation of a technology +known as “tcpwrappers,” or it may be done be using interface-based exclusion +so smbd will bind only to specifically permitted interfaces. It is also +possible to set specific share or resource-based exclusions, for example on the [IPC$] auto-share. The [IPC$] share is used for browsing purposes as well as to establish TCP/IP connections.

    -Another method by which Samba may be secured is by way of setting Access Control Entries in an Access -Control List on the shares themselves. This is discussed in the chapter on File, Directory and Share Access -Control. -

    Technical Discussion of Protective Measures and Issues

    +Another method by which Samba may be secured is by setting Access Control Entries (ACEs) in an Access +Control List (ACL) on the shares themselves. This is discussed in . +

    Technical Discussion of Protective Measures and Issues

    The key challenge of security is the fact that protective measures suffice at best only to close the door on known exploits and breach techniques. Never assume that because you have followed these few measures that the Samba server is now an impenetrable fortress! Given the history of information systems so far, it is only a matter of time before someone will find yet another vulnerability. -

    Using host based protection

    - In many installations of Samba the greatest threat comes for outside - your immediate network. By default Samba will accept connections from +

    Using Host-Based Protection

    + In many installations of Samba, the greatest threat comes from outside + your immediate network. By default, Samba will accept connections from any host, which means that if you run an insecure version of Samba on a host that is directly connected to the Internet you can be especially vulnerable.

    - One of the simplest fixes in this case is to use the hosts allow and - hosts deny options in the Samba smb.conf configuration file to only - allow access to your server from a specific range of hosts. An example - might be: + One of the simplest fixes in this case is to use the hosts allow and + hosts deny options in the Samba smb.conf configuration file to only + allow access to your server from a specific range of hosts. An example might be:

    hosts allow = 127.0.0.1 192.168.2.0/24 192.168.3.0/24
    hosts deny = 0.0.0.0/0

    - The above will only allow SMB connections from 'localhost' (your own - computer) and from the two private networks 192.168.2 and - 192.168.3. All other connections will be refused as soon - as the client sends its first packet. The refusal will be marked as a - not listening on called name error. -

    User based protection

    - If you want to restrict access to your server to valid users only then the following + The above will only allow SMB connections from localhost (your own + computer) and from the two private networks 192.168.2 and 192.168.3. All other + connections will be refused as soon as the client sends its first packet. The refusal + will be marked as not listening on called name error. +

    User-Based Protection

    + If you want to restrict access to your server to valid users only, then the following method may be of use. In the smb.conf [global] section put:

    valid users = @smbusers, jacko

    - What this does is, it restricts all server access to either the user jacko + This restricts all server access to either the user jacko or to members of the system group smbusers. -

    Using interface protection

    - By default Samba will accept connections on any network interface that +

    Using Interface Protection

    + By default, Samba will accept connections on any network interface that it finds on your system. That means if you have a ISDN line or a PPP connection to the Internet then Samba will accept connections on those links. This may not be what you want.

    - You can change this behaviour using options like the following: + You can change this behavior using options like this:

    interfaces = eth* lo
    bind interfaces only = yes

    This tells Samba to only listen for connections on interfaces with a - name starting with 'eth' such as eth0, eth1, plus on the loopback - interface called 'lo'. The name you will need to use depends on what - OS you are using, in the above I used the common name for Ethernet + name starting with eth such as eth0, eth1 plus on the loopback + interface called lo. The name you will need to use depends on what + OS you are using. In the above, I used the common name for Ethernet adapters on Linux.

    - If you use the above and someone tries to make a SMB connection to - your host over a PPP interface called 'ppp0' then they will get a TCP - connection refused reply. In that case no Samba code is run at all as + If you use the above and someone tries to make an SMB connection to + your host over a PPP interface called ppp0, then they will get a TCP + connection refused reply. In that case, no Samba code is run at all as the operating system has been told not to pass connections from that - interface to any samba process. -

    Using a firewall

    - Many people use a firewall to deny access to services that they don't - want exposed outside their network. This can be a very good idea, - although I would recommend using it in conjunction with the above - methods so that you are protected even if your firewall is not active + interface to any Samba process. +

    Using a Firewall

    + Many people use a firewall to deny access to services they do not + want exposed outside their network. This can be a good idea, + although I recommend using it in conjunction with the above + methods so you are protected even if your firewall is not active for some reason.

    - If you are setting up a firewall then you need to know what TCP and + If you are setting up a firewall, you need to know what TCP and UDP ports to allow and block. Samba uses the following:

    UDP/137 - used by nmbd
    UDP/138 - used by nmbd
    TCP/139 - used by smbd
    TCP/445 - used by smbd

    The last one is important as many older firewall setups may not be aware of it, given that this port was only added to the protocol in recent years. -

    Using a IPC$ share deny

    +

    Using IPC$ Share-Based Denials

    If the above methods are not suitable, then you could also place a more specific deny on the IPC$ share that is used in the recently discovered security hole. This allows you to offer access to other shares while denying access to IPC$ from potentially untrustworthy hosts.

    - To do that you could use: -

    [ipc$]
    hosts allow = 192.168.115.0/24 127.0.0.1
    hosts deny = 0.0.0.0/0

    - this would tell Samba that IPC$ connections are not allowed from - anywhere but the two listed places (localhost and a local - subnet). Connections to other shares would still be allowed. As the - IPC$ share is the only share that is always accessible anonymously + To do this you could use: +

    [IPC$]
    hosts allow = 192.168.115.0/24 127.0.0.1
    hosts deny = 0.0.0.0/0

    + This instructs Samba that IPC$ connections are not allowed from + anywhere except from the two listed network addresses (localhost and the 192.168.115 + subnet). Connections to other shares are still allowed. As the + IPC$ share is the only share that is always accessible anonymously, this provides some level of protection against attackers that do not - know a username/password for your host. -

    - If you use this method then clients will be given a access denied - reply when they try to access the IPC$ share. That means that those - clients will not be able to browse shares, and may also be unable to - access some other resources. + know a valid username/password for your host.

    - This is not recommended unless you cannot use one of the other - methods listed above for some reason. -

    NTLMv2 Security

    - To configure NTLMv2 authentication the following registry keys are worth knowing about: + If you use this method, then clients will be given an `access denied' + reply when they try to access the IPC$ share. Those clients will not be able to + browse shares, and may also be unable to access some other resources. This is not + recommended unless you cannot use one of the other methods listed above for some reason. +

    NTLMv2 Security

    + To configure NTLMv2 authentication, the following registry keys are worth knowing about:

     		[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa]
     		"lmcompatibilitylevel"=dword:00000003
     		

    - 0x3 - Send NTLMv2 response only. Clients will use NTLMv2 authentication, - use NTLMv2 session security if the server supports it. Domain - controllers accept LM, NTLM and NTLMv2 authentication. + The value 0x00000003 means send NTLMv2 response only. Clients will use NTLMv2 authentication, + use NTLMv2 session security if the server supports it. Domain Controllers accept LM, + NTLM and NTLMv2 authentication.

     		[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0]
     		"NtlmMinClientSec"=dword:00080000
     		

    - 0x80000 - NTLMv2 session security. If either NtlmMinClientSec or - NtlmMinServerSec is set to 0x80000, the connection will fail if NTLMv2 - session security is not negotiated. -

    Upgrading Samba

    -Please check regularly on http://www.samba.org/ for updates and -important announcements. Occasionally security releases are made and + The value 0x00080000 means permit only NTLMv2 session security. If either NtlmMinClientSec or + NtlmMinServerSec is set to 0x00080000, the connection will fail if NTLMv2 + session security is not negotiated. +

    Upgrading Samba

    +Please check regularly on http://www.samba.org/ for updates and +important announcements. Occasionally security releases are made and it is highly recommended to upgrade Samba when a security vulnerability is discovered. Check with your OS vendor for OS specific upgrades. -

    Common Errors

    -If all of samba and host platform configuration were really as intuitive as one might like then this +

    Common Errors

    +If all of Samba and host platform configuration were really as intuitive as one might like them to be, this section would not be necessary. Security issues are often vexing for a support person to resolve, not -because of the complexity of the problem, but for reason that most administrators who post what turns +because of the complexity of the problem, but for the reason that most administrators who post what turns out to be a security problem request are totally convinced that the problem is with Samba. -

    Smbclient works on localhost, but the network is dead

    - This is a very common problem. Red Hat Linux (as do others) will install a default firewall. - With the default firewall in place only traffic on the loopback adapter (IP address 127.0.0.1) - will be allowed through the firewall. +

    Smbclient Works on Localhost, but the Network Is Dead

    + This is a common problem. Red Hat Linux (and others) installs a default firewall. + With the default firewall in place, only traffic on the loopback adapter (IP address 127.0.0.1) + is allowed through the firewall.

    - The solution is either to remove the firewall (stop it) or to modify the firewall script to + The solution is either to remove the firewall (stop it) or modify the firewall script to allow SMB networking traffic through. See section above in this chapter. -

    Why can users access home directories of other users?

    +

    Why Can Users Access Home Directories of Other Users?

    We are unable to keep individual users from mapping to any other user's home directory once they have supplied a valid password! They only need - to enter their own password. I have not found *any* method that I can - use to configure samba to enforce that only a user may map their own - home directory. + to enter their own password. I have not found any method to configure + Samba so that users may map only their own home directory.

    User xyzzy can map his home directory. Once mapped user xyzzy can also map - *anyone* else's home directory! + anyone else's home directory.

    - This is not a security flaw, it is by design. Samba allows - users to have *exactly* the same access to the UNIX filesystem - as they would if they were logged onto the UNIX box, except - that it only allows such views onto the file system as are - allowed by the defined shares. -

    - This means that if your UNIX home directories are set up - such that one user can happily cd into another users - directory and do an ls, the UNIX security solution is to - change the UNIX file permissions on the users home directories - such that the cd and ls would be denied. -

    - Samba tries very hard not to second guess the UNIX administrators - security policies, and trusts the UNIX admin to set - the policies and permissions he or she desires. -

    - Samba does allow the setup you require when you have set the - only user = yes option on the share, is that you have not set the - valid users list for the share. -

    - Note that only user works in conjunction with the users= list, + This is not a security flaw, it is by design. Samba allows users to have + exactly the same access to the UNIX file system as when they were logged + onto the UNIX box, except that it only allows such views onto the file + system as are allowed by the defined shares. +

    + If your UNIX home directories are set up so that one user can happily cd + into another users directory and execute ls, the UNIX security solution is to change file + permissions on the user's home directories such that the cd and ls are denied. +

    + Samba tries very hard not to second guess the UNIX administrators security policies, and + trusts the UNIX admin to set the policies and permissions he or she desires. +

    + Samba allows the behavior you require. Simply put the only user = %S + option in the [homes] share definition. +

    + The only user works in conjunction with the users = list, so to get the behavior you require, add the line :

    users = %S

    - this is equivalent to: + this is equivalent to adding

    valid users = %S

    to the definition of the [homes] share, as recommended in the smb.conf man page. -

    Chapter 16. Interdomain Trust Relationships

    John H. Terpstra

    Samba Team

    Rafal Szczesniak

    Samba Team

    Jelmer R. Vernooij

    drawing
    The Samba Team

    Stephen Langasek

    April 3, 2003

    -Samba-3 supports NT4 style domain trust relationships. This is feature that many sites -will want to use if they migrate to Samba-3 from and NT4 style domain and do NOT want to -adopt Active Directory or an LDAP based authentication back end. This section explains +

    Chapter 16. Interdomain Trust Relationships

    John H. Terpstra

    Samba Team

    Rafal Szczesniak

    Samba Team

    Jelmer R. Vernooij

    drawing
    The Samba Team

    Stephen Langasek

    April 3, 2003

    + +Samba-3 supports NT4-style domain trust relationships. This is a feature that many sites +will want to use if they migrate to Samba-3 from an NT4-style domain and do not want to +adopt Active Directory or an LDAP-based authentication backend. This section explains some background information regarding trust relationships and how to create them. It is now -possible for Samba-3 to trust NT4 (and vice versa), as well as to create Samba3-to-Samba3 +possible for Samba-3 to trust NT4 (and vice versa), as well as to create Samba-to-Samba trusts. -

    Features and Benefits

    -Samba-3 can participate in Samba-to-Samba as well as in Samba-to-MS Windows NT4 style -trust relationships. This imparts to Samba similar scalability as is possible with -MS Windows NT4. +

    Features and Benefits

    +Samba-3 can participate in Samba-to-Samba as well as in Samba-to-MS Windows NT4-style +trust relationships. This imparts to Samba similar scalability as with MS Windows NT4.

    Given that Samba-3 has the capability to function with a scalable backend authentication -database such as LDAP, and given it's ability to run in Primary as well as Backup Domain control +database such as LDAP, and given its ability to run in Primary as well as Backup Domain Control modes, the administrator would be well advised to consider alternatives to the use of Interdomain trusts simply because by the very nature of how this works it is fragile. That was, after all, a key reason for the development and adoption of Microsoft Active Directory. -

    Trust Relationship Background

    -MS Windows NT3.x/4.0 type security domains employ a non-hierarchical security structure. -The limitations of this architecture as it affects the scalability of MS Windows networking -in large organisations is well known. Additionally, the flat namespace that results from +

    Trust Relationship Background

    +MS Windows NT3/4 type security domains employ a non-hierarchical security structure. +The limitations of this architecture as it effects the scalability of MS Windows networking +in large organizations is well known. Additionally, the flat namespace that results from this design significantly impacts the delegation of administrative responsibilities in -large and diverse organisations. +large and diverse organizations.

    Microsoft developed Active Directory Service (ADS), based on Kerberos and LDAP, as a means -of circumventing the limitations of the older technologies. Not every organisation is ready -or willing to embrace ADS. For small companies the older NT4 style domain security paradigm -is quite adequate, there thus remains an entrenched user base for whom there is no direct +of circumventing the limitations of the older technologies. Not every organization is ready +or willing to embrace ADS. For small companies the older NT4-style domain security paradigm +is quite adequate, there remains an entrenched user base for whom there is no direct desire to go through a disruptive change to adopt ADS.

    -Microsoft introduced with MS Windows NT the ability to allow differing security domains -to affect a mechanism so that users from one domain may be given access rights and privileges +With MS Windows NT, Microsoft introduced the ability to allow differing security domains +to effect a mechanism so users from one domain may be given access rights and privileges in another domain. The language that describes this capability is couched in terms of Trusts. Specifically, one domain will trust the users from another domain. The domain from which users are available to another security domain is said to be a trusted domain. The domain in which those users have assigned rights and privileges is the trusting domain. With NT3.x/4.0 all trust relationships are always in one direction only, thus if users in both domains are to have privileges and rights in each others' domain, then it is -necessary to establish two (2) relationships, one in each direction. +necessary to establish two relationships, one in each direction.

    -In an NT4 style MS security domain, all trusts are non-transitive. This means that if there -are three (3) domains (let's call them RED, WHITE, and BLUE) where RED and WHITE have a trust +In an NT4-style MS security domain, all trusts are non-transitive. This means that if there +are three domains (let's call them RED, WHITE and BLUE) where RED and WHITE have a trust relationship, and WHITE and BLUE have a trust relationship, then it holds that there is no -implied trust between the RED and BLUE domains. ie: Relationships are explicit and not +implied trust between the RED and BLUE domains. Relationships are explicit and not transitive.

    - New to MS Windows 2000 ADS security contexts is the fact that trust relationships are two-way by default. Also, all inter-ADS domain trusts are transitive. In the case of the RED, WHITE and BLUE -domains above, with Windows 2000 and ADS the RED and BLUE domains CAN trust each other. This is -an inherent feature of ADS domains. Samba-3 implements MS Windows NT4 -style Interdomain trusts and interoperates with MS Windows 200x ADS -security domains in similar manner to MS Windows NT4 style domains. -

    Native MS Windows NT4 Trusts Configuration

    -There are two steps to creating an interdomain trust relationship. To effect a two-way trust -relationship it is necessary for each domain administrator to create a trust account for the +domains above, with Windows 2000 and ADS the RED and BLUE domains can trust each other. This is +an inherent feature of ADS domains. Samba-3 implements MS Windows NT4-style Interdomain trusts +and interoperates with MS Windows 200x ADS security domains in similar manner to MS Windows NT4-style domains. +

    Native MS Windows NT4 Trusts Configuration

    +There are two steps to creating an interdomain trust relationship. To effect a two-way trust +relationship, it is necessary for each domain administrator to create a trust account for the other domain to use in verifying security credentials. - - -

    Creating an NT4 Domain Trust

    + +

    Creating an NT4 Domain Trust

    For MS Windows NT4, all domain trust relationships are configured using the Domain User Manager. This is done from the Domain User Manager Policies entry on the menu bar. From the Policy menu, select -Trust Relationships. Next to the lower box labelled +Trust Relationships. Next to the lower box labeled Permitted to Trust this Domain are two buttons, Add and Remove. The Add button will open a panel in which to enter the name of the remote domain that will be able to assign access rights to users in -your domain. You will also need to enter a password for this trust relationship, which the +your domain. You will also need to enter a password for this trust relationship, which the trusting domain will use when authenticating users from the trusted domain. The password needs to be typed twice (for standard confirmation). -

    Completing an NT4 Domain Trust

    - +

    Completing an NT4 Domain Trust

    + A trust relationship will work only when the other (trusting) domain makes the appropriate connections -with the trusted domain. To consummate the trust relationship the administrator will launch the -Domain User Manager, from the menu select Policies, then select Trust Relationships, then click on the -Add button that is next to the box that is labelled -Trusted Domains. A panel will open in which must be entered the name of the remote -domain as well as the password assigned to that trust. -

    Inter-Domain Trust Facilities

    +with the trusted domain. To consummate the trust relationship, the administrator will launch the +Domain User Manager from the menu select Policies, then select +Trust Relationships, click on the Add button +next to the box that is labeled Trusted Domains. A panel will open in which +must be entered the name of the remote domain as well as the password assigned to that trust. +

    Inter-Domain Trust Facilities

    + A two-way trust relationship is created when two one-way trusts are created, one in each direction. Where a one-way trust has been established between two MS Windows NT4 domains (let's call them -DomA and DomB) the following facilities are created: -

    Figure 16.1. Trusts overview

    Trusts overview
    • - DomA (completes the trust connection) Trusts DomB +DomA and DomB), the following facilities are created: +

      Figure 16.1. Trusts overview.

      Trusts overview.
      • + DomA (completes the trust connection) Trusts DomB.

      • - DomA is the Trusting domain + DomA is the Trusting domain.

      • - DomB is the Trusted domain (originates the trust account) + DomB is the Trusted domain (originates the trust account).

      • - Users in DomB can access resources in DomA + Users in DomB can access resources in DomA.

      • - Users in DomA can NOT access resources in DomB + Users in DomA cannot access resources in DomB.

      • - Global groups from DomB CAN be used in DomA + Global groups from DomB can be used in DomA.

      • - Global groups from DomA can NOT be used in DomB + Global groups from DomA cannot be used in DomB.

      • - DomB DOES appear in the logon dialog box on client workstations in DomA + DomB does appear in the logon dialog box on client workstations in DomA.

      • - DomA does NOT appear in the logon dialog box on client workstations in DomB + DomA does not appear in the logon dialog box on client workstations in DomB.

      • - Users / Groups in a trusting domain can NOT be granted rights, permissions or access + Users/Groups in a trusting domain cannot be granted rights, permissions or access to a trusted domain.

      • - The trusting domain CAN access and use accounts (Users / Global Groups) in the + The trusting domain can access and use accounts (Users/Global Groups) in the trusted domain.

      • - Administrators of the trusted domain CAN be granted admininstrative rights in the + Administrators of the trusted domain can be granted admininstrative rights in the trusting domain.

      • - Users in a trusted domain CAN be given rights and privileges in the trusting + Users in a trusted domain can be given rights and privileges in the trusting domain.

      • - Trusted domain Global Groups CAN be given rights and permissions in the trusting + Trusted domain Global Groups can be given rights and permissions in the trusting domain.

      • - Global Groups from the trusted domain CAN be made members in Local Groups on - MS Windows domain member machines. -

    Configuring Samba NT-style Domain Trusts

    + Global Groups from the trusted domain can be made members in Local Groups on + MS Windows Domain Member machines. +

    Configuring Samba NT-Style Domain Trusts

    This description is meant to be a fairly short introduction about how to set up a Samba server so -that it could participate in interdomain trust relationships. Trust relationship support in Samba -is in its early stage, so lot of things don't work yet. +that it can participate in interdomain trust relationships. Trust relationship support in Samba +is at an early stage, so do not be surprised if something does not function as it should.

    Each of the procedures described below assumes the peer domain in the trust relationship is -controlled by a Windows NT4 server. However, the remote end could just as well be another +controlled by a Windows NT4 server. However, the remote end could just as well be another Samba-3 domain. It can be clearly seen, after reading this document, that combining Samba-specific parts of what's written below leads to trust between domains in a purely Samba environment.

    Samba as the Trusted Domain

    -In order to set the Samba PDC to be the trusted party of the relationship you first need +In order to set the Samba PDC to be the trusted party of the relationship, you first need to create a special account for the domain that will be the trusting party. To do that, -you can use the 'smbpasswd' utility. Creating the trusted domain account is very +you can use the smbpasswd utility. Creating the trusted domain account is similar to creating a trusted machine account. Suppose, your domain is called SAMBA, and the remote domain is called RUMBA. The first step -will be to issue this command from your favourite shell: +will be to issue this command from your favorite shell:

     root#  smbpasswd -a -i rumba
    @@ -5636,286 +5935,297 @@ Added user rumba$
     

    where -a means to add a new account into the -passdb database and -i means: ''create this -account with the InterDomain trust flag'' +passdb database and -i means: “create this +account with the InterDomain trust flag”.

    -The account name will be 'rumba$' (the name of the remote domain) +The account name will be “rumba$” (the name of the remote domain).

    -After issuing this command you'll be asked to enter the password for +After issuing this command, you will be asked to enter the password for the account. You can use any password you want, but be aware that Windows NT will -not change this password until 7 days following account creation. +not change this password until seven days following account creation. After the command returns successfully, you can look at the entry for the new account (in the standard way as appropriate for your configuration) and see that account's name is -really RUMBA$ and it has the 'I' flag set in the flags field. Now you're ready to confirm +really RUMBA$ and it has the “I” flag set in the flags field. Now you are ready to confirm the trust by establishing it from Windows NT Server. -

    +

    + Open User Manager for Domains and from the Policies menu, select Trust Relationships.... -Right beside the Trusted domains list box press the +Beside the Trusted domains list box click the Add... button. You will be prompted for the trusted domain name and the relationship password. Type in SAMBA, as this is -the name of the remote domain, and the password used at the time of account creation. -Press OK and, if everything went without incident, you will see -Trusted domain relationship successfully +the name of the remote domain and the password used at the time of account creation. +Click on OK and, if everything went without incident, you will see +the Trusted domain relationship successfully established message. -

    Samba as the Trusting Domain

    +

    Samba as the Trusting Domain

    This time activities are somewhat reversed. Again, we'll assume that your domain -controlled by the Samba PDC is called SAMBA and NT-controlled domain is called RUMBA. +controlled by the Samba PDC is called SAMBA and the NT-controlled domain is called RUMBA.

    The very first step is to add an account for the SAMBA domain on RUMBA's PDC. -

    +

    + Launch the Domain User Manager, then from the menu select Policies, Trust Relationships. Now, next to the Trusted Domains box press the Add -button, and type in the name of the trusted domain (SAMBA) and the password to use in securing +button and type in the name of the trusted domain (SAMBA) and the password to use in securing the relationship.

    The password can be arbitrarily chosen. It is easy to change the password from the Samba server whenever you want. After confirming the password your account is -ready for use. Now it's Samba's turn. +ready for use. Now its Samba's turn.

    -Using your favourite shell while being logged in as root, issue this command: +Using your favorite shell while being logged in as root, issue this command:

    root# net rpc trustdom establish rumba

    You will be prompted for the password you just typed on your Windows NT4 Server box. -Do not worry if you see an error message that mentions a return code of -NT_STATUS_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT. It means the -password you gave is correct and the NT4 Server says the account is -ready for interdomain connection and not for ordinary -connection. After that, be patient; it can take a while (especially -in large networks), but eventually you should see the Success message. -Congratulations! Your trust relationship has just been established. +An error message `NT_STATUS_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT' +that may be reported periodically is of no concern and may safely be ignored. +It means the password you gave is correct and the NT4 Server says the account is ready for +interdomain connection and not for ordinary connection. After that, be patient; +it can take a while (especially in large networks), but eventually you should see +the Success message. Congratulations! Your trust +relationship has just been established.

    Note

    -Note that you have to run this command as root because you must have write access to +You have to run this command as root because you must have write access to the secrets.tdb file. -

    NT4-style Domain Trusts with Windows 2000

    +

    NT4-Style Domain Trusts with Windows 2000

    Although Domain User Manager is not present in Windows 2000, it is also possible to establish an NT4-style trust relationship with a Windows 2000 domain -controller running in mixed mode as the trusting server. It should also be possible for +controller running in mixed mode as the trusting server. It should also be possible for Samba to trust a Windows 2000 server, however, more testing is still needed in this area.

    -After creating the interdomain trust account on the -Samba server as described above, open Active Directory Domains and +After as described above, open Active Directory Domains and Trusts on the AD controller of the domain whose resources you wish Samba users -to have access to. Remember that since NT4-style trusts are not transitive, if you want +to have access to. Remember that since NT4-style trusts are not transitive, if you want your users to have access to multiple mixed-mode domains in your AD forest, you will need to -repeat this process for each of those domains. With Active Directory Domains +repeat this process for each of those domains. With Active Directory Domains and Trusts open, right-click on the name of the Active Directory domain that -will trust our Samba domain and choose Properties, then click on -the Trusts tab. In the upper part of the panel, you will see a list box -labelled Domains trusted by this domain:, and an -Add... button next to it. Press this button, and just as with NT4, you -will be prompted for the trusted domain name and the relationship password. Press OK, and +will trust our Samba domain and choose Properties, then click on +the Trusts tab. In the upper part of the panel, you will see a list box +labeled Domains trusted by this domain:, and an +Add... button next to it. Press this button and just as with NT4, you +will be prompted for the trusted domain name and the relationship password. Press OK and after a moment, Active Directory will respond with The trusted domain has been added and the trust has been verified. Your Samba users can now be granted acess to resources in the AD domain. -

    Common Errors

    -Interdomain trust relationships should NOT be attempted on networks that are unstable +

    Common Errors

    +Interdomain trust relationships should not be attempted on networks that are unstable or that suffer regular outages. Network stability and integrity are key concerns with distributed trusted domains.

    Chapter 17. Hosting a Microsoft Distributed File System tree on Samba

    Shirish Kalele

    Samba Team & Veritas Software

    12 Jul 2000

    Features and Benefits

    - The Distributed File System (or DFS) provides a means of separating the logical +

    John H. Terpstra

    Samba Team

    12 Jul 2000

    Features and Benefits

    + The Distributed File System (DFS) provides a means of separating the logical view of files and directories that users see from the actual physical locations of these resources on the network. It allows for higher availability, smoother - storage expansion, load balancing etc. + storage expansion, load balancing, and so on.

    For information about DFS, refer to the -Microsoft documentation. -

    +Microsoft documentation. This document explains how to host a DFS tree on a UNIX machine (for DFS-aware clients to browse) using Samba.

    - To enable SMB-based DFS for Samba, configure it with the --with-msdfs + To enable SMB-based DFS for Samba, configure it with the --with-msdfs option. Once built, a Samba server can be made a DFS server by setting the global - boolean host msdfs + Boolean host msdfs parameter in the smb.conf file. You designate a share as a DFS - root using the share level boolean msdfs root parameter. A DFS root directory on Samba hosts DFS + root using the Share Level Boolean msdfs root parameter. A DFS root directory on Samba hosts DFS links in the form of symbolic links that point to other servers. For example, a symbolic link junction->msdfs:storage1\share1 in the share directory acts as the DFS junction. When DFS-aware clients attempt to access the junction link, - they are redirected to the storage location (in this case, \\storage1\share1). + they are redirected to the storage location (in this case, \\storage1\share1).

    DFS trees on Samba work with all DFS-aware clients ranging from Windows 95 to 200x. -

    - Here's an example of setting up a DFS tree on a Samba server. -

    Example 17.1. smb.conf with DFS configured

    [global]
    netbios name = GANDALF
    host msdfs = yes
    [dfs]
    path = /export/dfsroot
    msdfs root = yes

    In the /export/dfsroot directory we set up our DFS links to - other servers on the network.

    +	 shows how to setup a DFS tree on a Samba server.
    +	In the /export/dfsroot directory, you set up your DFS links to 
    +	other servers on the network.
    +

     root# cd /export/dfsroot
     root# chown root /export/dfsroot
     root# chmod 755 /export/dfsroot
     root# ln -s msdfs:storageA\\shareA linka
     root# ln -s msdfs:serverB\\share,serverC\\share linkb
    -

    You should set up the permissions and ownership of - the directory acting as the DFS root such that only designated +

    +

    +

    Example 17.1. smb.conf with DFS configured

    [global]
    netbios name = GANDALF
    host msdfs = yes
    [dfs]
    path = /export/dfsroot
    msdfs root = yes

    +

    You should set up the permissions and ownership of + the directory acting as the DFS root so that only designated users can create, delete or modify the msdfs links. Also note that symlink names should be all lowercase. This limitation exists to have Samba avoid trying all the case combinations to get at - the link name. Finally set up the symbolic links to point to the - network shares you want, and start Samba.

    Users on DFS-aware clients can now browse the DFS tree + the link name. Finally, set up the symbolic links to point to the + network shares you want and start Samba.

    Users on DFS-aware clients can now browse the DFS tree on the Samba server at \\samba\dfs. Accessing links linka or linkb (which appear as directories to the client) - takes users directly to the appropriate shares on the network.

    Common Errors

    • Windows clients need to be rebooted - if a previously mounted non-dfs share is made a DFS + takes users directly to the appropriate shares on the network.

    Common Errors

    • Windows clients need to be rebooted + if a previously mounted non-DFS share is made a DFS root or vice versa. A better way is to introduce a - new share and make it the DFS root.

    • Currently there's a restriction that msdfs + new share and make it the DFS root.

    • Currently, there's a restriction that msdfs symlink names should all be lowercase.

    • For security purposes, the directory acting as the root of the DFS tree should have ownership - and permissions set so that only designated users can - modify the symbolic links in the directory.

    Chapter 18. Classical Printing Support

    Kurt Pfeifle

    Danka Deutschland GmbH

    Gerald (Jerry) Carter

    Samba Team

    May 31, 2003

    Table of Contents

    Features and Benefits
    Technical Introduction
    What happens if you send a Job from a Client
    Printing Related Configuration Parameters
    Parameters Recommended for Use
    A simple Configuration to Print
    Verification of "Settings in Use" with testparm
    A little Experiment to warn you
    Extended Sample Configuration to Print
    Detailed Explanation of the Example's Settings
    The [global] Section
    The [printers] Section
    Any [my_printer_name] Section
    Print Commands
    Default Print Commands for various UNIX Print Subsystems
    Setting up your own Print Commands
    Innovations in Samba Printing since 2.2
    Client Drivers on Samba Server for Point'n'Print
    The [printer$] Section is removed from Samba 3
    Creating the [print$] Share
    Parameters in the [print$] Section
    Subdirectory Structure in [print$]
    Installing Drivers into [print$]
    Setting Drivers for existing Printers with a Client GUI
    Setting Drivers for existing Printers with -rpcclient
    Client Driver Install Procedure
    The first Client Driver Installation
    IMPORTANT! Setting Device Modes on new Printers
    Further Client Driver Install Procedures
    Always make first Client Connection as root or "printer admin"
    Other Gotchas
    Setting Default Print Options for the Client Drivers
    Supporting large Numbers of Printers
    Adding new Printers with the Windows NT APW
    Weird Error Message Cannot connect under a -different Name
    Be careful when assembling Driver Files
    Samba and Printer Ports
    Avoiding the most common Misconfigurations of the Client Driver
    The Imprints Toolset
    What is Imprints?
    Creating Printer Driver Packages
    The Imprints Server
    The Installation Client
    Add Network Printers at Logon without User Interaction
    The addprinter command
    Migration of "Classical" printing to Samba
    Publishing Printer Information in Active Directory or LDAP
    Common Errors
    I give my root password but I don't get access
    My printjobs get spooled into the spooling directory, but then get lost

    Features and Benefits

    -Printing is often a mission-critical service for the users. Samba can + and permissions set so only designated users can + modify the symbolic links in the directory.

    MSDFS UNIX Path Is Case-Critical

    + A network administrator sent advice to the Samba mailing list + after a long sessions trying to determine why DFS was not working. + His advice is worth noting. +

    + I spent some time trying to figure out why my particular + dfs root wasn't working. I noted in the documenation that + the symlink should be in all lowercase. It should be + amended that the entire path to the symlink should all be + in lowercase as well. +

    + For example, I had a share defined as such: + +

    +		[pub]
    +			path = /export/home/Shares/public_share
    +			msdfs root = yes
    +		

    + + and I could not make my Windows 9x/Me (with the dfs client installed) + follow this symlink: + +

    +			damage1 -> msdfs:damage\test-share
    +		

    +

    + Running a debug level of 10 reveals: + +

    +		[2003/08/20 11:40:33, 5] msdfs/msdfs.c:is_msdfs_link(176)
    +		  is_msdfs_link: /export/home/shares/public_share/* does not exist.
    +		

    + + Curious. So I changed the directory name from .../Shares/... to + .../shares/... (along with my service definition) and it worked! +

    Chapter 18. Classical Printing Support

    Kurt Pfeifle

    Danka Deutschland GmbH

    Gerald (Jerry) Carter

    Samba Team

    John H. Terpstra

    Samba Team

    May 31, 2003

    Table of Contents

    Features and Benefits
    Technical Introduction
    Client to Samba Print Job Processing
    Printing Related Configuration Parameters
    Simple Print Configuration
    Verifing Configuration with testparm
    Rapid Configuration Validation
    Extended Printing Configuration
    Detailed Explanation Settings
    Printing Developments Since Samba-2.2
    Point'n'Print Client Drivers on Samba Servers
    The Obsoleted [printer$] Section
    Creating the [print$] Share
    [print$] Section Parameters
    The [print$] Share Directory
    Installing Drivers into [print$]
    Add Printer Wizard Driver Installation
    Installing Print Drivers Using rpcclient
    Client Driver Installation Procedure
    First Client Driver Installation
    Setting Device Modes on New Printers
    Additional Client Driver Installation
    Always Make First Client Connection as root or printer admin
    Other Gotchas
    Setting Default Print Options for Client Drivers
    Supporting Large Numbers of Printers
    Adding New Printers with the Windows NT APW
    Error Message: Cannot connect under a different Name
    Take Care When Assembling Driver Files
    Samba and Printer Ports
    Avoiding Common Client Driver Misconfiguration
    The Imprints Toolset
    What is Imprints?
    Creating Printer Driver Packages
    The Imprints Server
    The Installation Client
    Adding Network Printers without User Interaction
    The addprinter Command
    Migration of Classical Printing to Samba
    Publishing Printer Information in Active Directory or LDAP
    Common Errors
    I Give My Root Password but I Do Not Get Access
    My Print Jobs Get Spooled into the Spooling Directory, but Then Get Lost

    Features and Benefits

    +Printing is often a mission-critical service for the users. Samba can provide this service reliably and seamlessly for a client network consisting of Windows workstations.

    -A Samba print service may be run on a Standalone or a Domain -member server, side by side with file serving functions, or on a -dedicated print server. It can be made as tight or as loosely secured -as needs dictate. Configurations may be simple or complex. Available -authentication schemes are essentially the same as described for file -services in previous chapters. Overall, Samba's printing support is -now able to replace an NT or Windows 2000 print server full-square, -with additional benefits in many cases. Clients may download and -install drivers and printers through their familiar "Point'n'Print" -mechanism. Printer installations executed by "Logon Scripts" are no -problem. Administrators can upload and manage drivers to be used by -clients through the familiar "Add Printer Wizard". As an additional -benefit, driver and printer management may be run from the command line -or through scripts, making it more efficient in case of large numbers -of printers. If a central accounting of print jobs (tracking every -single page and supplying the raw data for all sorts of statistical -reports) is required, this is best supported by CUPS as the print -subsystem underneath the Samba hood. -

    -This chapter deals with the foundations of Samba printing, as they -implemented by the more traditional UNIX (BSD- and System V-style) -printing systems. Many things apply to CUPS, the newer Common UNIX -Printing System, too; so if you use CUPS, you might be tempted to jump -to the next chapter -- but you will certainly miss a few things if you -do so. Better to read this chapter too. +A Samba print service may be run on a Stand-alone or Domain Member server, +side by side with file serving functions, or on a dedicated print server. +It can be made as tight or as loosely secured as needs dictate. Configurations +may be simple or complex. Available authentication schemes are essentially +the same as described for file services in previous chapters. Overall, +Samba's printing support is now able to replace an NT or Windows 2000 +print server full-square, with additional benefits in many cases. Clients +may download and install drivers and printers through their familiar +“Point'n'Print” mechanism. Printer installations executed by +“Logon Scripts” are no problem. Administrators can upload and +manage drivers to be used by clients through the familiar “Add Printer +Wizard”. As an additional benefit, driver and printer management may +be run from the command line or through scripts, making it more efficient +in case of large numbers of printers. If a central accounting of print jobs +(tracking every single page and supplying the raw data for all sorts of +statistical reports) is required, this function is best supported by +the newer Common UNIX Printing System (CUPS) +as the print subsystem underneath the Samba hood. +

    +This chapter deals with the foundations of Samba printing as they +are implemented by the more traditional UNIX (BSD- and System V-style) +printing systems. Many things covered in this chapter apply also to CUPS. +If you use CUPS, you may be tempted +to jump to the next chapter but you will certainly miss a few things if +you do. It is recommended that you read this chapter as well as .

    Note

    -Most of the given examples have been verified on Windows XP +Most of the following examples have been verified on Windows XP Professional clients. Where this document describes the responses to -commands given, bear in mind that Windows 2000 clients are very -similar, but may differ in details. Windows NT is somewhat different +commands given, bear in mind that Windows 200x/XP clients are quite +similar, but may differ in minor details. Windows NT is somewhat different again. -

    Technical Introduction

    -Samba's printing support always relies on the installed print -subsystem of the UNIX OS it runs on. Samba is a "middleman". It takes -printfiles from Windows (or other SMB) clients and passes them to the -real printing system for further processing. Therefore it needs to -"talk" to two sides: to the Windows print clients and to the UNIX -printing system. Hence we must differentiate between the various -client OS types each of which behave differently, as well as the -various UNIX print subsystems, which themselves have different -features and are accessed differently. This part of the Samba HOWTO -Collection deals with the "traditional" way of UNIX printing first; -the next chapter covers in great detail the more modern -Common UNIX Printing System -(CUPS). - -

    Important

    CUPS users, be warned: don't just jump on to the next -chapter. You might miss important information contained only -here!

    -

    What happens if you send a Job from a Client

    -To successfully print a job from a Windows client via a Samba -print server to a UNIX printer, there are 6 (potentially 7) -stages: -

    1. Windows opens a connection to the printer share

    2. Samba must authenticate the user

    3. Windows sends a copy of the printfile over the network -into Samba's spooling area

    4. Windows closes the connection again

    5. Samba invokes the print command to hand the file over -to the UNIX print subsystem's spooling area

    6. The UNIX print subsystem processes the print -job

    7. The printfile may need to be explicitly deleted -from the Samba spooling area.

    Printing Related Configuration Parameters

    -There are a number of configuration parameters in - controlling Samba's printing -behaviour. Please also refer to the man page for smb.conf to -acquire an overview about these. As with other parameters, there are -Global Level (tagged with a "G" in the listings) and -Service Level ("S") parameters. -

    Service Level Parameters

    These may go into the -[global] section of smb.conf. -In this case they define the default -behaviour of all individual or service level shares (provided those -don't have a different setting defined for the same parameter, thus -overriding the global default).

    Global Parameters

    These may not go into individual -shares. If they go in by error, the "testparm" utility can discover -this (if you run it) and tell you so.

    Parameters Recommended for Use

    The following smb.conf parameters directly -related to printing are used in Samba. See also the -smb.conf man page for detailed explanations: -

    Global level parameters: addprinter command, -deleteprinter command, -disable spoolss, -enumports command, -load printers, -lpq cache time, -os2 driver map, -printcap name, printcap, -show add printer wizard, -total print jobs, -use client driver. -

    Service level parameters: hosts allow, -hosts deny, -lppause command, -lpq command, -lpresume command, -lprm command, -max print jobs, -min print space, -print command, -printable, print ok , -printer name, printer, -printer admin, -printing = [cups|bsd|lprng...], -queuepause command, -queueresume command, -total print jobs. -

    -Samba's printing support implements the Microsoft Remote Procedure -Calls (MS-RPC) methods for printing. These are used by Windows NT (and -later) print servers. The old "LanMan" protocol is still supported as -a fallback resort, and for older clients to use. More details will -follow further beneath. -

    A simple Configuration to Print

    -Here is a very simple example configuration for print related settings -in the file. If you compare it with your own system's , you probably find some -additional parameters included there (as pre-configured by your OS -vendor). Further below is a discussion and explanation of the -parameters. Note, that this example doesn't use many parameters. +

    Technical Introduction

    +Samba's printing support always relies on the installed print subsystem +of the UNIX OS it runs on. Samba is a “middleman.” It takes +print files from Windows (or other SMB) clients and passes them to the real +printing system for further processing, therefore, it needs to communicate with +both sides: the Windows print clients and the UNIX printing system. Hence, we +must differentiate between the various client OS types, each of which behave +differently, as well as the various UNIX print subsystems, which themselves +have different features and are accessed differently. +

    +This deals with the traditional way of UNIX printing. The next chapter +covers in great detail the more modern Common UNIX Printing +System (CUPS). +

    Important

    CUPS users, be warned: do not just jump on to the next +chapter. You might miss important information only found here! +

    +It is apparent from postings on the Samba mailing list that print configuration +is one of the most problematic aspects of Samba administration today. Many +new Samba administrators have the impression that Samba performs some sort +of print processing. Rest assured, Samba does not peform any type of print +processing. It does not do any form of print filtering. +

    +Samba obtains from its clients a data stream (print job) that it spools to a +local spool area. When the entire print job has been received, Samba invokes +a local UNIX/Linux print command and passes the spooled file to it. It is +up to the local system printing subsystems to correctly process the print +job and to submit it to the printer. +

    Client to Samba Print Job Processing

    +Successful printing from a Windows client via a Samba print server to a UNIX +printer involves six (potentially seven) stages: +

    1. Windows opens a connection to the printer share.

    2. Samba must authenticate the user.

    3. Windows sends a copy of the print file over the network +into Samba's spooling area.

    4. Windows closes the connection.

    5. Samba invokes the print command to hand the file over +to the UNIX print subsystem's spooling area.

    6. The UNIX print subsystem processes the print job.

    7. The print file may need to be explicitly deleted +from the Samba spooling area. This item depends on your print spooler +configuration settings.

    Printing Related Configuration Parameters

    +There are a number of configuration parameters to control Samba's +printing behavior. Please refer to the man page for smb.conf for an +overview of these. As with other parameters, there are Global Level +(tagged with a G in the listings) and Service Level +(S) parameters. +

    Global Parameters

    These may not go into + individual share definitions. If they go in by error, + the testparm utility can discover this + (if you run it) and tell you so. +

    Service Level Parameters

    These may be specified in the + [global] section of smb.conf. + In this case they define the default behavior of all individual + or service level shares (provided they do not have a different + setting defined for the same parameter, thus overriding the + global default). +

    Simple Print Configuration

    + shows a simple printing configuration. +If you compare this with your own, you may find +additional parameters that have been pre-configured by your OS +vendor. Below is a discussion and explanation of the +parameters. This example does not use many parameters. However, in many environments these are enough to provide a valid -smb.conf file which enables all clients to print. -

    Example 18.1. Simple configuration with BSD printing

    [global]
    printing = bsd
    load printers = yes
    [printers]
    path = /var/spool/samba
    printable = yes
    public = yes
    writable = no

    -This is only an example configuration. Samba assigns default values to all -configuration parameters. On the whole the defaults are conservative and -sensible. When a parameter is specified in the smb.conf file this overwrites -the default value. The testparm utility when run as root -is capable of reporting all setting, both default as well as smb.conf file -settings. Testparm gives warnings for all mis-configured -settings. The complete output is easily 340 lines and more, so you may want -to pipe it through a pager program. +smb.conf file that enables all clients to print. +

    +

    Example 18.1. Simple configuration with BSD printing

    [global]
    printing = bsd
    load printers = yes
    [printers]
    path = /var/spool/samba
    printable = yes
    public = yes
    writable = no

    +This is only an example configuration. Samba assigns default values to +all configuration parameters. The defaults are conservative +and sensible. When a parameter is specified in the smb.conf file, this +overwrites the default value. The testparm utility when +run as root is capable of reporting all setting, both default as well as +smb.conf file settings. Testparm gives warnings for all +misconfigured settings. The complete output is easily 340 lines and more, +so you may want to pipe it through a pager program.

    The syntax for the configuration file is easy to grasp. You should -know that is not very picky about its -syntax. It has been explained elsewhere in this document. A short -reminder: It even tolerates some spelling errors (like "browsable" -instead of "browseable"). Most spelling is case-insensitive. Also, you -can use "Yes|No" or "True|False" for boolean settings. Lists of names +know that is not very picky about its syntax. As has been explained +elsewhere in this document, Samba tolerates some spelling errors (such +as browsable instead of +browseable), and spelling is +case-insensitive. It is permissible to use Yes/No +or True/False for Boolean settings. Lists of names may be separated by commas, spaces or tabs. -

    Verification of "Settings in Use" with testparm

    -To see all (or at least most) printing related settings in Samba, -including the implicitly used ones, try the command outlined below -(hit "ENTER" twice!). It greps for all occurrences of "lp", "print", -"spool", "driver", "ports" and "[" in testparm's output and gives you -a nice overview about the running smbd's print configuration. (Note -that this command does not show individually created printer shares, -or the spooling paths in each case). Here is the output of my Samba -setup, with exactly the same settings in -as shown above: +

    Verifing Configuration with testparm

    +To see all (or at least most) printing-related settings in Samba, including +the implicitly used ones, try the command outlined below. This command greps +for all occurrences of lp, print, spool, driver, ports +and [ in testparms output. This provides a convenient +overview of the running smbd print configuration. This +command does not show individually created printer shares or the spooling +paths they may use. Here is the output of my Samba setup, with settings +shown in :

    -root# testparm -v | egrep "(lp|print|spool|driver|ports|\[)"
    - Load smb config files from /etc/samba/smb.conf.simpleprinting
    +root# testparm -s -v | egrep "(lp|print|spool|driver|ports|\[)"
    + Load smb config files from /etc/samba/smb.conf
      Processing section "[homes]"
      Processing section "[printers]"
      
    @@ -5949,70 +6259,63 @@ as shown above:
      [printers]
             path = /var/spool/samba
             printable = Yes
    -
     

    +

    You can easily verify which settings were implicitly added by Samba's -default behaviour. Don't forget about this point: it may +default behavior. Remember: it may be important in your future dealings with Samba. -

    Note

    testparm in samba 3 behaves differently from 2.2.x: used -without the "-v" switch it only shows you the settings actually -written into ! To see the complete -configuration used, add the "-v" parameter to testparm.

    A little Experiment to warn you

    +

    Note

    testparm in Samba-3 behaves differently from that in 2.2.x: used +without the “-v” switch it only shows you the settings actually +written into! To see the complete +configuration used, add the “-v” parameter to testparm.

    Rapid Configuration Validation

    Should you need to troubleshoot at any stage, please always come back -to this point first and verify if "testparm" shows the parameters you -expect! To give you an example from personal experience as a warning, -try to just "comment out" the load printers" +to this point first and verify if testparm shows the parameters you +expect. To give you a warning from personal experience, +try to just comment out the load printers parameter. If your 2.2.x system behaves like mine, you'll see this:

     root# grep "load printers" /etc/samba/smb.conf
    - #      load printers = Yes
    - # This setting is commented ooouuuuut!!
    +        #  load printers = Yes
    +        # This setting is commented out!!
      
     root# testparm -v /etc/samba/smb.conf | egrep "(load printers)"
             load printers = Yes
    -
     

    -Despite my imagination that the commenting out of this setting should -prevent Samba from publishing my printers, it still did! Oh Boy -- it -cost me quite some time to find out the reason. But I am not fooled -any more... at least not by this ;-) +I assumed that commenting out of this setting should prevent Samba from +publishing my printers, but it still did. It took some time to figure out +the reason. But I am no longer fooled ... at least not by this.

     root# grep -A1 "load printers" /etc/samba/smb.conf
             load printers = No
    -        # This setting is what I mean!!
    - #      load printers = Yes
    -        # This setting is commented ooouuuuut!!
    +        # The above setting is what I want!
    +        #  load printers = Yes
    +        # This setting is commented out!
     
    -root# testparm -v smb.conf.simpleprinting | egrep "(load printers)"
    +root# testparm -s -v smb.conf.simpleprinting | egrep "(load printers)"
             load printers = No
     
     

    -Only when setting the parameter explicitly to -"load printers = No" -would Samba recognize my intentions. So my strong advice is: -

    • Never rely on "commented out" parameters!

    • Always set it up explicitly as you intend it to +Only when the parameter is explicitly set to +load printers = No +would Samba conform with my intentions. So, my strong advice is: +

      • Never rely on commented out parameters.

      • Always set parameters explicitly as you intend them to behave.

      • Use testparm to uncover hidden -settings which might not reflect your intentions.

      -You can have a working Samba print configuration with this -minimal : +settings that might not reflect your intentions.

    +The following is the most minimal configuration file:

     root# cat /etc/samba/smb.conf-minimal
             [printers]
    -
     

    -This example should show you that you can use testparm to test any -filename for fitness as a Samba configuration. Actually, we want to -encourage you not to change your - on a working system (unless you know -exactly what you are doing)! Don't rely on an assumption that changes -will only take effect after you re-start smbd! This is not the -case. Samba re-reads its every 60 -seconds and on each new client connection. You might have to face -changes for your production clients that you didn't intend to apply at -this time! You will now note a few more interesting things. Let's now -ask testparm what the Samba print configuration -would be, if you used this minimalistic file as your real -: +This example should show that you can use testparm to test any Samba +configuration file. Actually, we encourage you not +to change your working system (unless you know exactly what you are +doing). Don't rely on the assumption that changes will only take effect after +you re-start smbd! This is not the case. Samba re-reads it every 60 seconds +and on each new client connection. You might have to face changes for your +production clients that you didn't intend to apply. You will now +note a few more interesting things; testparm is useful to +identify what the Samba print configuration would be if you used this minimalistic +configuration. Here is what you can expect to find:

     root# testparm -v smb.conf-minimal | egrep "(print|lpq|spool|driver|ports|[)"
      Processing section "[printers]"
    @@ -6038,677 +6341,570 @@ would be, if you used this minimalistic file as your real
             lpq command = lpq -P%p
             printer name =
             use client driver = No
    +
      [printers]
             printable = Yes
     
     

    -testparm issued 2 warnings: -

    • because we didn't specify the -[printers] section as printable, -and

    • because we didn't tell it which spool directory to -use.

    -However, this was not fatal, and samba will default to values that -will work here. Please, don't rely on this and don't use this -example! This was only meant to make you careful to design and specify -your setup to be what you really want it to be. The outcome on your -system may vary for some parameters, since you may have a Samba built -with a different compile-time configuration. -Warning: don't put a comment sign at -the end of a valid line. It -will cause the parameter to be ignored (just as if you had put the -comment sign at the front). At first I regarded this as a bug in my -Samba version(s). But the man page states: “Internal whitespace -in a parameter value is retained verbatim.” This means that a -line consisting of, for example, -

    # This defines LPRng as the printing system"
    printing = lprng

    -will regard the whole of the string after the "=" -sign as the value you want to define. And this is an invalid value -that will be ignored, and a default value used instead.] -

    Extended Sample Configuration to Print

    - In the extended BSD configuration example we show a more verbose example configuration for print related - settings in BSD-printing style environment . Below is a discussion -and explanation of the various parameters. We chose to use BSD-style -printing here, because we guess it is still the most commonly used -system on legacy Linux installations (new installs now predominantly -have CUPS, which is discussed entirely in the next chapter of this -document). Note, that this example explicitly names many parameters -which don't need to be specified because they are set by default. You -might be able to do with a leaner smb.conf file.

    Example 18.2. Extended configuration with BSD printing

    [global]
    printing = bsd
    load printers = yes
    show add printer wizard = yes
    printcap name = /etc/printcap
    printer admin = @ntadmin, root
    total print jobs = 100
    lpq cache time = 20
    use client driver = no
    [printers]
    comment = All Printers
    printable = yes
    path = /var/spool/samba
    browseable = no
    guest ok = yes
    public = yes
    read only = yes
    writable = no
    [my_printer_name]
    comment = Printer with Restricted Access
    path = /var/spool/samba_my_printer
    printer admin = kurt
    browseable = yes
    printable = yes
    writeable = no
    hosts allow = 0.0.0.0
    hosts deny = turbo_xp, 10.160.50.23, 10.160.51.60
    guest ok = no

    -This also is only an example configuration. You -may not find all the settings in your own - (as pre-configured by your OS -vendor). Many configuration parameters, if not explicitly set to a -specific value, are used and set by Samba implicitly to its own -default, because these have been compiled in. To see all settings, let -root use the testparm -utility. testparm also gives warnings if you have -mis-configured certain things.. -

    Detailed Explanation of the Example's Settings

    -Following is a discussion of the settings from above shown example. -

    The [global] Section

    -The [global] section is one of 4 special +testparm issued two warnings: +

    • We did not specify the [printers] section as printable.

    • We did not tell Samba which spool directory to use.

    +However, this was not fatal and Samba will default to values that will +work. Please, do not rely on this and do not use this example. This was +included to encourage you to be careful to design and specify your setup to do +precisely what you require. The outcome on your system may vary for some +parameters given, since Samba may have been built with different compile-time +options. Warning: do not put a comment sign +at the end of a valid line. It will cause the parameter +to be ignored (just as if you had put the comment sign at the front). At first +I regarded this as a bug in my Samba versions. But the man page clearly says: +“Internal whitespace in a parameter value is retained verbatim.” +This means that a line consisting of, for example: +

    # This defines LPRng as the printing system
    printing = lprng

    +will regard the whole of the string after the +“=” sign as the value you want to +define. This is an invalid value that will be ignored and a default +value will be +used in its place. +

    Extended Printing Configuration

    +In we show a more verbose example configuration +for print-related settings in a BSD-style printing environment. What follows +is a discussion and explanation of the various parameters. We chose to +use BSD-style printing here because it is still the most commonly used +system on legacy UNIX/Linux installations. New installations predominantly +use CUPS, which is discussed in a separate chapter. explicitly +names many parameters that do not need to be specified because they are set +by default. You could use a much leaner smb.conf file. Alternately, you can use +testparm or SWAT to optimize the smb.conf +file to remove all parameters that are set at default. +

    Example 18.2. Extended BSD Printing Configuration

    [global]
    printing = bsd
    load printers = yes
    show add printer wizard = yes
    printcap name = /etc/printcap
    printer admin = @ntadmin, root
    total print jobs = 100
    lpq cache time = 20
    use client driver = no
    [printers]
    comment = All Printers
    printable = yes
    path = /var/spool/samba
    browseable = no
    guest ok = yes
    public = yes
    read only = yes
    writable = no
    [my_printer_name]
    comment = Printer with Restricted Access
    path = /var/spool/samba_my_printer
    printer admin = kurt
    browseable = yes
    printable = yes
    writeable = no
    hosts allow = 0.0.0.0
    hosts deny = turbo_xp, 10.160.50.23, 10.160.51.60
    guest ok = no

    +This is an example configuration. You may not find all the settings that are in +the confioguration file that was provided by the OS vendor. Samba configuration +parameters, if not explicitly set default to a sensible value. +To see all settings, as root use the testparm +utility. testparm gives warnings for misconfigured settings. +

    Detailed Explanation Settings

    +The following is a discussion of the settings from above shown example. +

    The [global] Section

    +The [global] section is one of four special sections (along with [[homes], -[printers] and -[print$]...) It contains all parameters which -apply to the server as a whole. It is the place for parameters which -have only a "global" meaning. It may also contain service level -parameters which then define default settings for all other -sections and shares. This way you can simplify the configuration and -avoid setting the same value repeatedly. (Within each individual -section or share you may however override these globally set "share -level" settings and specify other values). -

    printing = bsd

    this causes Samba to use default print commands -applicable for the BSD (a.k.a. RFC 1179 style or LPR/LPD) printing -system. In general, the "printing" parameter informs Samba about the -print subsystem it should expect. Samba supports CUPS, LPD, LPRNG, -SYSV, HPUX, AIX, QNX and PLP. Each of these systems defaults to a -different print command (and other queue control -commands).

    Caution

    The printing parameter is -normally a service level parameter. Since it is included here in the -[global] section, it will take effect for all -printer shares that are not defined differently. Samba 3 no longer -supports the SOFTQ printing system.

    load printers = yes

    this tells Samba to create automatically all -available printer shares. "Available" printer shares are discovered by -scanning the printcap file. All created printer shares are also loaded -for browsing. If you use this parameter, you do not need to specify -separate shares for each printer. Each automatically created printer -share will clone the configuration options found in the -[printers] section. (A load printers -= no setting will allow you to specify each UNIX printer -you want to share separately, leaving out some you don't want to be -publicly visible and available).

    show add printer wizard = yes

    this setting is normally -enabled by default (even if the parameter is not written into the -). It makes the Add Printer Wizard icon -show up in the Printers folder of the Samba host's -share listing (as shown in Network Neighbourhood or -by the net view command). To disable it, you need to -explicitly set it to no (commenting it out -will not suffice!). The Add Printer Wizard lets you upload printer -drivers to the [print$] share and associate it -with a printer (if the respective queue exists there before the -action), or exchange a printer's driver against any other previously -uploaded driver.

    total print jobs = 100

    this setting sets the upper limit to 100 print jobs -being active on the Samba server at any one time. Should a client -submit a job which exceeds this number, a “no more space -available on server” type of error message will be returned by -Samba to the client. A setting of "0" (the default) means there is -no limit at all! -

    printcap name = /etc/printcap

    this tells Samba where to look for a list of -available printer names. (If you use CUPS, make sure that a printcap -file is written: this is controlled by the "Printcap" directive of -cupsd.conf). -

    printer admin = @ntadmin

    members of the ntadmin group should be able to add -drivers and set printer properties ("ntadmin" is only an example name, -it needs to be a valid UNIX group name); root is implicitly always a -printer admin. The "@" sign precedes group names in -. A printer admin can do anything to -printers via the remote administration interfaces offered by MS-RPC -(see below). Note that the printer admin -parameter is normally a share level parameter, so you may associate -different groups to different printer shares in larger installations, -if you use the printer admin parameter on the -share levels). -

    lpq cache time = 20

    this controls the cache time for the results of the -lpq command. It prevents the lpq command being called too often and -reduces load on a heavily used print server. -

    use client driver = no

    if set to yes, this setting only -takes effect for Win NT/2k/XP clients (and not for Win 95/98/ME). Its -default value is No (or False). -It must not be enabled on print shares -(with a yes or true setting) which -have valid drivers installed on the Samba server! For more detailed -explanations see the man page of smb.conf. -

    The [printers] Section

    -This is the second special section. If a section with this name -appears in the smb.conf, users are able to -connect to any printer specified in the Samba host's printcap file, -because Samba on startup then creates a printer share for every -printername it finds in the printcap file. You could regard this -section as a general convenience shortcut to share all printers with -minimal configuration. It is also a container for settings which -should apply as default to all printers. (For more details see the -smb.conf man page.) Settings inside this -container must be share level parameters. -

    comment = All printers

    the comment is shown next to -the share if a client queries the server, either via Network -Neighbourhood or with the net view command to list -available shares. -

    printable = yes

    please note well, that the -[printers] service must be -declared as printable. If you specify otherwise, smbd will refuse to -load at startup. This parameter allows -connected clients to open, write to and submit spool files into the -directory specified with the path parameter for -this service. It is used by Samba to differentiate printer shares from -file shares.

    path = /var/spool/samba

    this must point to a directory used by Samba to spool -incoming print files. It must not be the same as the spool -directory specified in the configuration of your UNIX print -subsystem! The path would typically point to a directory -which is world writeable, with the "sticky" bit set to it. -

    browseable = no

    this is always set to no if -printable = yes. It makes the -[printer] share itself invisible in the -list of available shares in a net view command or -in the Explorer browse list. (Note that you will of course see the -individual printers). -

    guest ok = yes

    -if set to yes, then no password is required to -connect to the printers service. Access will be granted with the -privileges of the guest account. On many systems the -guest account will map to a user named "nobody". This user is in the UNIX -passwd file with an empty password, but with no valid UNIX login. -(Note: on some systems the guest account might not have the -privilege to be able to print. Test this by logging in as your -guest user using su - guest and run a system print -command like -

    lpr -P printername /etc/motd

    public = yes

    this is a synonym for guest ok = yes. Since we have guest ok = yes, -it really doesn't need to be here! (This leads to the interesting -question: “What, if I by accident have to contradictory settings -for the same share?” The answer is: the last one encountered by -Samba wins. The "winner" is shown by testparm. Testparm doesn't -complain about different settings of the same parameter for the same -share! You can test this by setting up multiple lines for the "guest -account" parameter with different usernames, and then run testparm to -see which one is actually used by Samba.) -

    read only = yes

    this normally (for other types of shares) prevents -users creating or modifying files in the service's directory. However, -in a "printable" service, it is always allowed to -write to the directory (if user privileges allow the connection), but -only via print spooling operations. "Normal" write operations are not -allowed.

    writeable = no

    -synonym for read only = yes -

    Any [my_printer_name] Section

    -If a section appears in the , which is -tagged as printable = yes, Samba presents it as -a printer share to its clients. Note, that Win95/98/ME clients may -have problems with connecting or loading printer drivers if the share -name has more than 8 characters! Also be very careful if you give a -printer the same name as an existing user or file share name: upon a -client's connection request to a certain sharename, Samba always tries -to find file shares with that name first; if it finds one, it will -connect to this and will never ultimately connect to a printer with -the same name! -

    comment = Printer with Restricted Access

    the comment says it all. -

    path = /var/spool/samba_my_printer

    here we set the spooling area for this printer to -another directory than the default. It is not a requirement to set it -differently, but the option is available. -

    printer admin = kurt

    the printer admin definition is different for this -explicitly defined printer share from the general -[printers] share. It is not a requirement; we -did it to show that it is possible if you want it. -

    browseable = yes

    we also made this printer browseable (so that the -clients may conveniently find it when browsing the Network -Neighbourhood). -

    printable = yes

    see explanation in last subsection. -

    writeable = no

    see explanation in last subsection. -

    hosts allow = 10.160.50.,10.160.51.

    here we exercise a certain degree of access control -by using the hosts allow and hosts deny parameters. Note, that -this is not by any means a safe bet. It is not a way to secure your -printers. This line accepts all clients from a certain subnet in a -first evaluation of access control -

    hosts deny = turbo_xp,10.160.50.23,10.160.51.60

    all listed hosts are not allowed here (even if they -belong to the "allowed subnets"). As you can see, you could name IP -addresses as well as NetBIOS hostnames -here. -

    guest ok = no

    this printer is not open for the guest account! -

    Print Commands

    -In each section defining a printer (or in the -[printers] section), a print -command parameter may be defined. It sets a command to -process the files which have been placed into the Samba print spool -directory for that printer. (That spool directory was, if you -remember, set up with the path -parameter). Typically, this command will submit the spool file to the -Samba host's print subsystem, using the suitable system print -command. But there is no requirement that this needs to be the -case. For debugging purposes or some other reason you may want to do -something completely different than "print" the file. An example is a -command that just copies the print file to a temporary location for -further investigation when you need to debug printing. If you craft -your own print commands (or even develop print command shell scripts), -make sure you pay attention to the need to remove the files from the -Samba spool directory. Otherwise your hard disk may soon suffer from -shortage of free space. -

    Default Print Commands for various UNIX Print Subsystems

    -You learned earlier on, that Samba in most cases uses its built-in -settings for many parameters if it can not find an explicitly stated -one in its configuration file. The same is true for the -print command. The default print command varies -depending on the printing parameter -setting. In the commands listed below, you will notice some parameters -of the form %X where X is -p, s, J etc. These letters stand for -"printername", "spoolfile" and "job ID" respectively. They are -explained in more detail further below. Here is an overview (excluding -the special case of CUPS, which is discussed in the next chapter): -

    If this setting is active......this is used in lieu of an explicit command:
    printing = bsd|aix|lprng|plpprint command is lpr -r -P%p %s
    printing = sysv|hpuxprint command is lp -c -P%p %s; rm %s
    printing = qnxprint command is lp -r -P%p -s %s
    printing = bsd|aix|lprng|plplpq command is lpq -P%p
    printing = sysv|hpuxlpq command is lpstat -o%p
    printing = qnxlpq command is lpq -P%p
    printing = bsd|aix|lprng|plplprm command is lprm -P%p %j
    printing = sysv|hpuxlprm command is cancel %p-%j
    printing = qnxlprm command is cancel %p-%j
    printing = bsd|aix|lprng|plplppause command is lp -i %p-%j -H hold
    printing = sysv|hpuxlppause command (...is empty)
    printing = qnxlppause command (...is empty)
    printing = bsd|aix|lprng|plplpresume command is lp -i %p-%j -H resume
    printing = sysv|hpuxlpresume command (...is empty)
    printing = qnxlpresume command (...is empty)

    -We excluded the special CUPS case here, because it is discussed in the -next chapter. Just a short summary. For printing = -CUPS: If SAMBA is compiled against libcups, it uses the -CUPS API to submit jobs, etc. (It is a good idea also to set -printcap = cups in case your -cupsd.conf is set to write its autogenerated -printcap file to an unusual place). Otherwise Samba maps to the System -V printing commands with the -oraw option for printing, i.e. it uses -lp -c -d%p -oraw; rm %s With printing = -cups , and if SAMBA is compiled against libcups, any -manually set print command will be ignored! -

    -Having listed the above mappings here, you should note that there used -to be a bug in recent 2.2.x versions which -prevented the mapping from taking effect. It lead to the -"bsd|aix|lprng|plp" settings taking effect for all other systems, for -the most important commands (the print command, the -lpq command and the lprm -command). The lppause command and the -lpresume command remained empty. Of course, these -commands worked on bsd|aix|lprng|plp but they didn't work on -sysv|hpux|qnx systems. To work around this bug, you need to -explicitly set the commands. Use testparm -v to -check which command takes effect. Then check that this command is -adequate and actually works for your installed print subsystem. It is -always a good idea to explicitly set up your configuration files the -way you want them to work and not rely on any built-in defaults. -

    Setting up your own Print Commands

    -After a print job has finished spooling to a service, the -print command will be used by Samba via a -system() call to process the spool file. Usually -the command specified will submit the spool file to the host's -printing subsystem. But there is no requirement at all that this must -be the case. The print subsystem will probably not remove the spool -file on its own. So whatever command you specify on your own you -should ensure that the spool file is deleted after it has been -processed. -

    -There is no difficulty with using your own customized print commands -with the traditional printing systems. However, if you don't wish to -"roll your own", you should be well informed about the default -built-in commands that Samba uses for each printing subsystem (see the -table above). In all the commands listed in the last paragraphs you -see parameters of the form %X These are -macros, or shortcuts, used as place holders for -the names of real objects. At the time of running a command with such -a placeholder, Samba will insert the appropriate value -automatically. Print commands can handle all Samba macro -substitutions. In regard to printing, the following ones do have +[printers] +and [print$]...). The +[global] contains all parameters which apply +to the server as a whole. It is the place for parameters that have only a +global meaning. It may also contain service level parameters that then define +default settings for all other sections and shares. This way you can simplify +the configuration and avoid setting the same value repeatedly. (Within each +individual section or share you may, however, override these globally set +share settings and specify other values). +

    printing = bsd

    Causes Samba to use default print commands + applicable for the BSD (also known as RFC 1179 style or LPR/LPD) printing + system. In general, the printing parameter informs Samba about the + print subsystem it should expect. Samba supports CUPS, LPD, LPRNG, + SYSV, HPUX, AIX, QNX, and PLP. Each of these systems defaults to a + different print command (and other queue control + commands).

    Caution

    The printing parameter is + normally a service level parameter. Since it is included here in the + [global] section, it will take effect for all + printer shares that are not defined differently. Samba-3 no longer + supports the SOFTQ printing system.

    load printers = yes

    Tells Samba to create automatically all + available printer shares. Available printer shares are discovered by + scanning the printcap file. All created printer shares are also loaded + for browsing. If you use this parameter, you do not need to specify + separate shares for each printer. Each automatically created printer + share will clone the configuration options found in the + [printers] section. (The load printers + = no setting will allow you to specify each UNIX printer + you want to share separately, leaving out some you do not want to be + publicly visible and available).

    show add printer wizard = yes

    Setting is normally enabled by default (even if the parameter is not specified in smb.conf). + It causes the Add Printer Wizard icon to appear + in the Printers folder of the Samba host's + share listing (as shown in Network Neighborhood or + by the net view command). To disable it, you need to + explicitly set it to no (commenting it out + will not suffice). The Add Printer Wizard lets you upload printer + drivers to the [print$] share and associate it + with a printer (if the respective queue exists before the + action), or exchange a printer's driver against any other previously + uploaded driver.

    total print jobs = 100

    Sets the upper limit to 100 print jobs + being active on the Samba server at any one time. Should a client + submit a job that exceeds this number, a “no more space + available on server” type of error message will be returned by + Samba to the client. A setting of zero (the default) means there is + no limit at all. +

    printcap name = /etc/printcap

    Tells Samba where to look for a list of + available printer names. Where CUPS is used, make sure that a printcap + file is written. This is controlled by the Printcap directive in the + cupsd.conf file. +

    printer admin = @ntadmin

    Members of the ntadmin group should be able to add + drivers and set printer properties (ntadmin is only an example name, + it needs to be a valid UNIX group name); root is implicitly always a + printer admin. The @ sign precedes group names in the + /etc/group. A printer admin can do anything to + printers via the remote administration interfaces offered by MS-RPC + (see below). In larger installations, the printer admin + parameter is normally a per-share parameter. This permits different groups to administer each printer share. +

    lpq cache time = 20

    Controls the cache time for the results of the + lpq command. It prevents the lpq command being called too often and + reduces the load on a heavily used print server. +

    use client driver = no

    If set to yes, only + takes effect for Windows NT/200x/XP clients (and not for Win 95/98/ME). Its + default value is No (or False). + It must not be enabled on print shares + (with a yes or true setting) that + have valid drivers installed on the Samba server. For more detailed + explanations see the smb.conf man page. +

    The [printers] Section

    +This is the second special section. If a section with this name appears in +the smb.conf, users are able to connect to any printer specified in the +Samba host's printcap file, because Samba on startup then creates a printer +share for every printername it finds in the printcap file. You could regard +this section as a general convenience shortcut to share all printers with +minimal configuration. It is also a container for settings that should +apply as default to all printers. (For more details see the smb.conf +man page.) Settings inside this container must be Share Level parameters. +

    comment = All printers

    + The comment is shown next to the share if + a client queries the server, either via Network Neighborhood or with + the net view command to list available shares. +

    printable = yes

    + The [printers] service must + be declared as printable. If you specify otherwise, smbd will refuse to load at + startup. This parameter allows connected clients to open, write to and submit spool files + into the directory specified with the path + parameter for this service. It is used by Samba to differentiate printer shares from + file shares. +

    path = /var/spool/samba

    + Must point to a directory used by Samba to spool incoming print files. It + must not be the same as the spool directory specified in the configuration of your UNIX + print subsystem! The path typically points to a directory that is world + writeable, with the “sticky” bit set to it. +

    browseable = no

    + Is always set to no if + printable = yes. It makes + the [printer] share itself invisible in the list of + available shares in a net view command or in the Explorer browse + list. (You will of course see the individual printers). +

    guest ok = yes

    + If this parameter is set to yes, no password is required to + connect to the printer's service. Access will be granted with the privileges of the + guest account. On many systems the guest + account will map to a user named “nobody”. This user will usually be found + in the UNIX passwd file with an empty password, but with no valid UNIX login. (On some + systems the guest account might not have the privilege to be able to print. Test this + by logging in as your guest user using su - guest and run a system + print command like: +

    + lpr -P printername /etc/motd +

    public = yes

    + Is a synonym for guest ok = yes. + Since we have guest ok = yes, it + really does not need to be here. (This leads to the interesting question: “What if I + by accident have two contradictory settings for the same share?” The answer is the + last one encountered by Samba wins. Testparm does not complain about different settings + of the same parameter for the same share. You can test this by setting up multiple + lines for the guest account parameter with different usernames, + and then run testparm to see which one is actually used by Samba.) +

    read only = yes

    + Normally (for other types of shares) prevents users from creating or modifying files + in the service's directory. However, in a “printable” service, it is + always allowed to write to the directory (if user privileges allow the + connection), but only via print spooling operations. Normal write operations are not permitted. +

    writeable = no

    + Is a synonym for read only = yes. +

    Any [my_printer_name] Section

    +If a section appears in the smb.conf file, which when given the parameter +printable = yes causes Samba to configure it +as a printer share. Windows 9x/Me clients may have problems with connecting or loading printer drivers +if the share name has more than eight characters. Do not name a printer share with a name that may conflict +with an existing user or file share name. On Client connection requests, Samba always tries to find file +shares with that name first. If it finds one, it will connect to this and will not connect +to a printer with the same name! +

    comment = Printer with Restricted Access

    + The comment says it all. +

    path = /var/spool/samba_my_printer

    + Sets the spooling area for this printer to a directory other than the default. It is not + necessary to set it differently, but the option is available. +

    printer admin = kurt

    + The printer admin definition is different for this explicitly defined printer share from the general + [printers] share. It is not a requirement; we + did it to show that it is possible. +

    browseable = yes

    + This makes the printer browseable so the clients may conveniently find it when browsing the + Network Neighborhood. +

    printable = yes

    + See . +

    writeable = no

    + See . +

    hosts allow = 10.160.50.,10.160.51.

    + Here we exercise a certain degree of access control by using the hosts allow and hosts deny + parameters. This is not by any means a safe bet. It is not a way to secure your + printers. This line accepts all clients from a certain subnet in a first evaluation of + access control. +

    hosts deny = turbo_xp,10.160.50.23,10.160.51.60

    + All listed hosts are not allowed here (even if they belong to the allowed subnets). As + you can see, you could name IP addresses as well as NetBIOS hostnames here. +

    guest ok = no

    + This printer is not open for the guest account. +

    Print Commands

    +In each section defining a printer (or in the [printers] section), +a print command parameter may be defined. It sets a command to process the files +that have been placed into the Samba print spool directory for that printer. (That spool directory was, +if you remember, set up with the path parameter). Typically, +this command will submit the spool file to the Samba host's print subsystem, using the suitable system +print command. But there is no requirement that this needs to be the case. For debugging or +some other reason, you may want to do something completely different than print the file. An example is a +command that just copies the print file to a temporary location for further investigation when you need +to debug printing. If you craft your own print commands (or even develop print command shell scripts), +make sure you pay attention to the need to remove the files from the Samba spool directory. Otherwise, +your hard disk may soon suffer from shortage of free space. +

    Default UNIX System Printing Commands

    +You learned earlier on that Samba, in most cases, uses its built-in settings for many parameters +if it cannot find an explicitly stated one in its configuration file. The same is true for the +print command. The default print command varies depending +on the printing parameter setting. In the commands listed +below, you will notice some parameters of the form %X where X is +p, s, J, and so on. These letters stand for printer name, spoolfile and job ID, respectively. +They are explained in more detail further below. presents an overview of key +printing options but excludes the special case of CUPS that is discussed in . +

    Table 18.1. Default Printing Settings

    SettingDefault Printing Commands
    printing = bsd|aix|lprng|plpprint command is lpr -r -P%p %s
    printing = sysv|hpuxprint command is lp -c -P%p %s; rm %s
    printing = qnxprint command is lp -r -P%p -s %s
    printing = bsd|aix|lprng|plplpq command is lpq -P%p
    printing = sysv|hpuxlpq command is lpstat -o%p
    printing = qnxlpq command is lpq -P%p
    printing = bsd|aix|lprng|plplprm command is lprm -P%p %j
    printing = sysv|hpuxlprm command is cancel %p-%j
    printing = qnxlprm command is cancel %p-%j
    printing = bsd|aix|lprng|plplppause command is lp -i %p-%j -H hold
    printing = sysv|hpuxlppause command (...is empty)
    printing = qnxlppause command (...is empty)
    printing = bsd|aix|lprng|plplpresume command is lp -i %p-%j -H resume
    printing = sysv|hpuxlpresume command (...is empty)
    printing = qnxlpresume command (...is empty)

    +We excluded the special case of CUPS here, because it is discussed in the next chapter. For +printing = CUPS, if Samba is compiled against libcups, it uses the CUPS API to submit +jobs. (It is a good idea also to set printcap = cups +in case your cupsd.conf is set to write its autogenerated printcap file to an +unusual place). Otherwise, Samba maps to the System V printing commands with the -oraw option for printing, +i.e., it uses lp -c -d%p -oraw; rm %s. With printing = cups, +and if Samba is compiled against libcups, any manually set print command will be ignored! +

    Custom Print Commands

    +After a print job has finished spooling to a service, the print command + will be used by Samba via a system() call to process the +spool file. Usually the command specified will submit the spool file to the host's printing subsystem. But +there is no requirement at all that this must be the case. The print subsystem may not remove the spool +file on its own. So whatever command you specify, you should ensure that the spool file is deleted after +it has been processed. +

    +There is no difficulty with using your own customized print commands with the traditional printing +systems. However, if you do not wish to roll your own, you should be well informed about the default +built-in commands that Samba uses for each printing subsystem (see +Table 17.1). In all the +commands listed in the last paragraphs, you see parameters of the form %X. These are +macros, or shortcuts, used as placeholders for the names of real objects. At the time +of running a command with such a placeholder, Samba will insert the appropriate value automatically. Print +commands can handle all Samba macro substitutions. In regard to printing, the following ones do have special relevance: -

    • %s, %f - the path to the spool -file name

    • %p - the appropriate printer -name

    • %J - the job name as -transmitted by the client.

    • %c - the number of printed -pages of the spooled job (if known).

    • %z - the size of the spooled -print job (in bytes)

    -The print command MUST contain at least one occurrence of -%s or %f. -- The -%p is optional. If no printer name is supplied, -the %p will be silently removed from the print -command. In this case the job is sent to the default printer. -

    -If specified in the [global] section, the print -command given will be used for any printable service that does not -have its own print command specified. If there is neither a specified -print command for a printable service nor a global print command, -spool files will be created but not processed! And (most importantly): -print files will not be removed, so they will start filling your Samba -hard disk. -

    -Note that printing may fail on some UNIXes from the "nobody" -account. If this happens, create an alternative guest account and -supply it with the privilege to print. Set up this guest account in -the [global] section with the guest -account parameter. -

    -You can form quite complex print commands. You need to realize that -print commands are just passed to a UNIX shell. The shell is able to -expand the included environment variables as usual. (The syntax to -include a UNIX environment variable $variable -in or in the Samba print command is -%$variable.) To give you a working -print command example, the following will log a -print job to /tmp/print.log, print the file, then -remove it. Note that ';' is the usual separator for commands in shell -scripts: +

    • %s, %f the path to the spool file name.

    • %p the appropriate printer name.

    • %J the job name as transmitted by the client.

    • %c the number of printed pages of the spooled job (if known).

    • %z the size of the spooled print job (in bytes).

    +The print command must contain at least one occurrence of %s or +the %f. The %p is optional. If no printer name is supplied, +the %p will be silently removed from the print command. In this case, the job is +sent to the default printer. +

    +If specified in the [global] section, the print command given will be +used for any printable service that does not have its own print command specified. If there is neither a +specified print command for a printable service nor a global print command, spool files will be created +but not processed! Most importantly, print files will not be removed, so they will consume disk space. +

    +Printing may fail on some UNIX systems when using the “nobody” account. If this happens, create an +alternative guest account and give it the privilege to print. Set up this guest account in the +[global] section with the guest account parameter. +

    +You can form quite complex print commands. You need to realize that print commands are just +passed to a UNIX shell. The shell is able to expand the included environment variables as +usual. (The syntax to include a UNIX environment variable $variable +in the Samba print command is %$variable.) To give you a working +print command example, the following will log a print job +to /tmp/print.log, print the file, then remove it. The semicolon (“;” +is the usual separator for commands in shell scripts:

    print command = echo Printing %s >> /tmp/print.log; lpr -P %p %s; rm %s

    -You may have to vary your own command considerably from this example -depending on how you normally print files on your system. The default -for the print command parameter varies depending on the setting of -the printing parameter. Another example is: -

    print command = /usr/local/samba/bin/myprintscript %p %s

    Innovations in Samba Printing since 2.2

    -Before version 2.2.0, Samba's print server support for Windows clients -was limited to the level of LanMan printing -calls. This is the same protocol level as Windows 9x PCs offer when -they share printers. Beginning with the 2.2.0 release, Samba started -to support the native Windows NT printing mechanisms. These are -implemented via MS-RPC (RPC = Remote -Procedure Calls ). MS-RPCs use the -SPOOLSS named pipe for all printing. +You may have to vary your own command considerably from this example depending on how you normally print +files on your system. The default for the print command +parameter varies depending on the setting of the printing +parameter. Another example is: +

    print command = /usr/local/samba/bin/myprintscript %p %s

    Printing Developments Since Samba-2.2

    +Prior to Samba-2.2.x, print server support for Windows clients was limited to LanMan +printing calls. This is the same protocol level as Windows 9x/Me PCs offer when they share printers. +Beginning with the 2.2.0 release, Samba started to support the native Windows NT printing mechanisms. These +are implemented via MS-RPC (RPC = Remote Procedure Calls +). MS-RPCs use the SPOOLSS named pipe for all printing.

    The additional functionality provided by the new SPOOLSS support includes: -

    • Support for downloading printer driver files to Windows -95/98/NT/2000 clients upon demand (Point'n'Print); -

    • Uploading of printer drivers via the Windows NT -Add Printer Wizard (APW) or the -Imprints tool set. -

    • Support for the native MS-RPC printing calls such as - StartDocPrinter, EnumJobs(), etc... (See the MSDN documentation for more information on the Win32 printing API);

    • Support for NT Access Control -Lists (ACL) on printer objects;

    • Improved support for printer queue manipulation -through the use of internal databases for spooled job information -(implemented by various *.tdb -files).

    -One other benefit of an update is this: Samba 3 is able to publish -all its printers in Active Directory (or LDAP)! -

    -One slight difference is here: it is possible on a Windows NT print -server to have printers listed in the Printers folder which are -not shared. Samba does not make this -distinction. By definition, the only printers of which Samba is aware -are those which are specified as shares in -. The reason is that Windows NT/200x/XP Professional -clients do not normally need to use the standard SMB printer share; -rather they can print directly to any printer on another Windows NT -host using MS-RPC. This of course assumes that the printing client has -the necessary privileges on the remote host serving the printer. The -default permissions assigned by Windows NT to a printer gives the -"Print" permissions to the well-known Everyone -group. (The older clients of type Win9x can only print to "shared" +

    • + Support for downloading printer driver files to Windows 95/98/NT/2000 clients upon + demand (Point'n'Print). +

    • + Uploading of printer drivers via the Windows NT Add Printer Wizard (APW) + or the Imprints tool set. +

    • + Support for the native MS-RPC printing calls such as + StartDocPrinter, EnumJobs(), and so on. (See the + MSDN documentation for more information on the + Win32 printing API). +

    • + Support for NT Access Control Lists (ACL) on printer objects. +

    • + Improved support for printer queue manipulation through the use of internal databases for spooled + job information (implemented by various *.tdb files). +

    +A benefit of updating is that Samba-3 is able to publish its printers to Active Directory (or LDAP). +

    +A fundamental difference exists between MS Windows NT print servers and Samba operation. Windows NT +permits the installation of local printers that are not shared. This is an artifact of the fact that +any Windows NT machine (server or client) may be used by a user as a workstation. Samba will publish all +printers that are made available, either by default or by specific declaration via printer-specific shares. +

    +Windows NT/200x/XP Professional clients do not have to use the standard SMB printer share; they can +print directly to any printer on another Windows NT host using MS-RPC. This, of course, assumes that +the client has the necessary privileges on the remote host that serves the printer resource. The +default permissions assigned by Windows NT to a printer gives the Print permissions to the well-known +Everyone group. (The older clients of type Windows 9x/Me can only print to shared printers). -

    Client Drivers on Samba Server for Point'n'Print

    -There is still confusion about what all this means: Is it or -is it not a requirement for printer drivers to be installed on a Samba -host in order to support printing from Windows clients? The -answer to this is: No, it is not a -requirement. Windows NT/2000 clients can, of -course, also run their APW to install drivers -locally (which then connect to a Samba served -print queue). This is the same method as used by Windows 9x -clients. (However, a bug existed in Samba 2.2.0 -which made Windows NT/2000 clients require that the Samba server -possess a valid driver for the printer. This was fixed in Samba -2.2.1). -

    -But it is a new option to install the printer -drivers into the [print$] share of the Samba -server, and a big convenience too. Then all -clients (including 95/98/ME) get the driver installed when they first -connect to this printer share. The uploading or -depositing of the driver into this -[print$] share, and the following binding of -this driver to an existing Samba printer share can be achieved by -different means: -

    • running the APW on an -NT/200x/XP Professional client (this doesn't work from 95/98/ME -clients);

    • using the Imprints -toolset;

    • using the smbclient and -rpcclient commandline tools;

    • using cupsaddsmb(only works for -the CUPS printing system, not for LPR/LPD, LPRng -etc.).

    -Please take additional note of the following fact: Samba -does not use these uploaded drivers in any way to process spooled -files. Drivers are utilized entirely by the clients, who -download and install them via the "Point'n'Print" mechanism supported -by Samba. The clients use these drivers to generate print files in the -format the printer (or the UNIX print system) requires. Print files -received by Samba are handed over to the UNIX printing system, which -is responsible for all further processing, if needed. -

    The [printer$] Section is removed from Samba 3

    -[print$] vs. [printer$] -.  -Versions of Samba prior to 2.2 made it possible to use a share -named [printer$]. This name was taken from the -same named service created by Windows 9x clients when a printer was -shared by them. Windows 9x printer servers always have a -[printer$] service which provides read-only -access (with no password required) in order to support printer driver -downloads. However, Samba's initial implementation allowed for a -parameter named printer driver location to be -used on a per share basis. This specified the location of the driver -files associated with that printer. Another parameter named -printer driver provided a means of defining the -printer driver name to be sent to the client. These parameters, -including the printer driver file parameter, -are now removed and can not be used in installations of samba-3. -Now the share name [print$] is used for the -location of downloadable printer drivers. It is taken from the -[print$] service created by Windows NT PCs when -a printer is shared by them. Windows NT print servers always have a -[print$] service which provides read-write -access (in the context of its ACLs) in order to support printer driver -down- and uploads. Don't fear -- this does not mean Windows 9x -clients are thrown aside now. They can use Samba's -[print$] share support just fine. -

    Creating the [print$] Share

    -In order to support the up- and downloading of printer driver files, -you must first configure a file share named -[print$]. The "public" name of this share is -hard coded in Samba's internals (because it is hard coded in the MS -Windows clients too). It cannot be renamed since Windows clients are -programmed to search for a service of exactly this name if they want -to retrieve printer driver files. -

    -You should modify the server's file to -add the global parameters and create the -[print$] file share (of course, some of the -parameter values, such as 'path' are arbitrary and should be replaced -with appropriate values for your site): -

    Example 18.3. [print\$] example

    [global]
    # members of the ntadmin group should be able to add drivers and set
    # printer properties. root is implicitly always a 'printer admin'.
    printer admin = @ntadmin
    ...
    [printers]
    ...
    [print$]
    comment = Printer Driver Download Area
    path = /etc/samba/drivers
    browseable = yes
    guest ok = yes
    read only = yes
    write list = @ntadmin, root

    +

    Point'n'Print Client Drivers on Samba Servers

    +There is much confusion about what all this means. The question is often asked, “Is it or is +it not necessary for printer drivers to be installed on a Samba host in order to support printing from +Windows clients?” The answer to this is no, it is not necessary. +

    +Windows NT/2000 clients can, of course, also run their APW to install drivers locally +(which then connect to a Samba-served print queue). This is the same method used by Windows 9x/Me +clients. (However, a bug existed in Samba 2.2.0 that made Windows NT/2000 clients +require that the Samba server possess a valid driver for the printer. This was fixed in Samba 2.2.1). +

    +But it is a new capability to install the printer drivers into the [print$] +share of the Samba server, and a big convenience, too. Then all clients +(including 95/98/ME) get the driver installed when they first connect to this printer share. The +uploading or depositing of the driver into this +[print$] share and the following binding of this driver to an existing +Samba printer share can be achieved by different means: +

    • + Running the APW on an NT/200x/XP Professional client (this does not work from 95/98/ME clients). +

    • + Using the Imprints toolset. +

    • + Using the smbclient and rpcclient commandline tools. +

    • + Using cupsaddsmb (only works for the CUPS + printing system, not for LPR/LPD, LPRng, and so on). +

    +Samba does not use these uploaded drivers in any way to process spooled files. These drivers are utilized +entirely by the clients who download and install them via the “Point'n'Print” mechanism +supported by Samba. The clients use these drivers to generate print files in the format the printer +(or the UNIX print system) requires. Print files received by Samba are handed over to the UNIX printing +system, which is responsible for all further processing, as needed. +

    The Obsoleted [printer$] Section

    + Versions of Samba prior to 2.2 made it possible to use a share named + [printer$]. This name was taken from the same named service created by + Windows 9x/Me clients when a printer was shared by them. Windows 9x/Me printer servers always + have a [printer$] service that provides read-only access (with + no password required) to support printer driver downloads. However, Samba's initial + implementation allowed for a parameter named printer driver location to + be used on a per share basis. This specified the location of the driver files associated with + that printer. Another parameter named printer driver provided a means of + defining the printer driver name to be sent to the client. +

    + These parameters, including the printer driver file parameter, + are now removed and cannot be used in installations of Samba-3. The share name + [print$] is now used for the location of downloadable printer + drivers. It is taken from the [print$] service created + by Windows NT PCs when a printer is shared by them. Windows NT print servers always have a + [print$] service that provides read-write access (in the context + of its ACLs) to support printer driver downloads and uploads. This does not mean Windows + 9x/Me clients are now thrown aside. They can use Samba's [print$] + share support just fine. +

    Creating the [print$] Share

    +In order to support the uploading and downloading of printer driver files, you must first configure a +file share named [print$]. The public name of this share is hard coded +in the MS Windows clients. It cannot be renamed since Windows clients are programmed to search for a +service of exactly this name if they want to retrieve printer driver files. +

    +You should modify the server's file to add the global parameters and create the +[print$] file share (of course, some of the parameter values, such +as path are arbitrary and should be replaced with appropriate values for your +site). See . +

    +

    Example 18.3. [print\$] example

    [global]
    # members of the ntadmin group should be able to add drivers and set
    # printer properties. root is implicitly always a 'printer admin'.
    printer admin = @ntadmin
    ...
    [printers]
    ...
    [print$]
    comment = Printer Driver Download Area
    path = /etc/samba/drivers
    browseable = yes
    guest ok = yes
    read only = yes
    write list = @ntadmin, root

    +

    Of course, you also need to ensure that the directory named by the -path parameter exists on the UNIX file system. -

    Parameters in the [print$] Section

    -[print$] is a special section in -. It contains settings relevant to -potential printer driver download and local installation by clients. -

    comment = Printer Driver - Download Area

    the comment appears next to the share name if it is -listed in a share list (usually Windows clients won't see it often but -it will also appear up in a smbclient -L sambaserver - output).

    path = /etc/samba/printers

    this is the path to the location of the Windows -driver file deposit from the UNIX point of -view.

    browseable = no

    this makes the [print$] share -"invisible" in Network Neighbourhood to clients. However, you can -still "mount" it from any client using the net use -g:\\sambaserver\print$ command in a "DOS box" or the -"Connect network drive" menu from Windows -Explorer.

    guest ok = yes

    this gives read only access to this share for all -guest users. Access may be used to download and install printer -drivers on clients. The requirement for guest ok = -yes depends upon how your site is configured. If users -will be guaranteed to have an account on the Samba host, then this is -a non-issue.

    Note

    -The non-issue is this: if all your Windows NT users are guaranteed to -be authenticated by the Samba server (for example if Samba -authenticates via an NT domain server and the NT user has already been -validated by the Domain Controller in order to logon to the Windows NT -session), then guest access is not necessary. Of course, in a -workgroup environment where you just want to be able to print without -worrying about silly accounts and security, then configure the share -for guest access. You'll probably want to add map to guest = Bad User in the -[global] section -as well. Make sure you understand what this parameter does before -using it. -

    read only = yes

    as we don't want everybody to upload driver files (or -even change driver settings) we tagged this share as not -writeable.

    write list = @ntadmin,root

    since the [print$] was made -read only by the previous setting, we need to create a "write list" -also. UNIX groups (denoted with a leading "@" character) and users -listed here are allowed write access (as an exception to the general -public's "read-only" access), which they need to update files on the -share. Normally you will want to only name administrative level user -accounts in this setting. Check the file system permissions to make -sure these accounts can copy files to the share. If this is a non-root -account, then the account should also be mentioned in the global -printer admin parameter. See the - man page for more information on -configuring file shares.

    Subdirectory Structure in [print$]

    -In order for a Windows NT print server to support the downloading of -driver files by multiple client architectures, you must create several -subdirectories within the [print$] service -(i.e. the UNIX directory named by the path -parameter). These correspond to each of the supported client -architectures. Samba follows this model as well. Just like the name of -the [print$] share itself, the subdirectories -*must* be exactly the names listed below (you may leave out the -subdirectories of architectures you don't want to support). +path parameter exists on the UNIX file system. +

    [print$] Section Parameters

    +The [print$] is a special section in smb.conf. It contains settings relevant to +potential printer driver download and is used by windows clients for local print driver installation. +The following parameters are frequently needed in this share section: +

    comment = Printer Driver Download Area

    + The comment appears next to the share name if it is listed in a share list (usually Windows + clients will not see it, but it will also appear up in a smbclient -L sambaserver + output). +

    path = /etc/samba/printers

    + Is the path to the location of the Windows driver file deposit from the UNIX point of view. +

    browseable = no

    + Makes the [print$] share invisible to clients from the + Network Neighborhood. However, you can still mount it from any client + using the net use g:\\sambaserver\print$ command in a DOS-box or the + Connect network drive menu> from Windows Explorer. +

    guest ok = yes

    + Gives read-only access to this share for all guest users. Access may be granted to + download and install printer drivers on clients. The requirement for guest ok + = yes depends on how your site is configured. If users will be guaranteed + to have an account on the Samba host, then this is a non-issue. +

    Note

    + If all your Windows NT users are guaranteed to be authenticated by the Samba server + (for example, if Samba authenticates via an NT domain server and the user has already been + validated by the Domain Controller in order to logon to the Windows NT session), then guest + access is not necessary. Of course, in a workgroup environment where you just want + to print without worrying about silly accounts and security, then configure the share for + guest access. You should consider adding map to guest = Bad + User in the [global] section + as well. Make sure you understand what this parameter does before using it. +

    read only = yes

    + Because we do not want everybody to upload driver files (or even change driver settings), + we tagged this share as not writeable. +

    write list = @ntadmin, root

    + The [print$] was made read-only by the previous + setting so we should create a write list entry also. UNIX + groups (denoted with a leading “@” character). Users listed here are allowed + write-access (as an exception to the general public's read-only access), which they need to + update files on the share. Normally, you will want to only name administrative-level user + account in this setting. Check the file system permissions to make sure these accounts + can copy files to the share. If this is a non-root account, then the account should also + be mentioned in the global printer admin + parameter. See the smb.conf man page for more information on configuring file shares. +

    The [print$] Share Directory

    +In order for a Windows NT print server to support the downloading of driver files by multiple client +architectures, you must create several subdirectories within the [print$] +service (i.e., the UNIX directory named by the path +parameter). These correspond to each of the supported client architectures. Samba follows this model as +well. Just like the name of the [print$] share itself, the subdirectories +must be exactly the names listed below (you may leave out the subdirectories of architectures you do +not need to support).

    Therefore, create a directory tree below the [print$] share for each architecture you wish -to support. +to support like this:

    -[print$]--+--
    -          |--W32X86           # serves drivers to "Windows NT x86"
    -          |--WIN40            # serves drivers to "Windows 95/98"
    -          |--W32ALPHA         # serves drivers to "Windows NT Alpha_AXP"
    -          |--W32MIPS          # serves drivers to "Windows NT R4000"
    -          |--W32PPC           # serves drivers to "Windows NT PowerPC"
    -

    Required permissions

    -In order to add a new driver to your Samba host, one of two conditions -must hold true: -

    • The account used to connect to the Samba host must -have a UID of 0 (i.e. a root account)

    • The account used to connect to the Samba host must be -named in the printer adminlist.

    -Of course, the connected account must still possess access to add -files to the subdirectories beneath -[print$]. Remember that all file shares are set -to 'read only' by default. -

    -Once you have created the required [print$] -service and associated subdirectories, go to a Windows NT 4.0/2k/XP -client workstation. Open Network Neighbourhood or -My Network Places and browse for the Samba host. -Once you have located the server, navigate to its Printers and -Faxes folder. You should see an initial listing of printers -that matches the printer shares defined on your Samba host. -

    Installing Drivers into [print$]

    -You have successfully created the [print$] -share in ? And Samba has re-read its -configuration? Good. But you are not yet ready to take off. The -driver files need to be present in this share, -too! So far it is still an empty share. Unfortunately, it is not enough -to just copy the driver files over. They need to be set -up too. And that is a bit tricky, to say the least. We -will now discuss two alternative ways to install the drivers into -[print$]: -

    • using the Samba commandline utility -rpcclient with its various subcommands (here: -adddriver and setdriver) from -any UNIX workstation;

    • running a GUI (Printer -Properties and Add Printer Wizard) -from any Windows NT/2k/XP client workstation.

    -The latter option is probably the easier one (even if the only -entrance to this realm seems a little bit weird at first). -

    Setting Drivers for existing Printers with a Client GUI

    -The initial listing of printers in the Samba host's -Printers folder accessed from a client's Explorer -will have no real printer driver assigned to them. By default -this driver name is set to a NULL -string. This must be changed now. The local Add Printer -Wizard, run from NT/2000/XP clients, will help us in this -task. -

    -However, the job to set a valid driver for the printer is not a -straightforward one: You must attempt to view the printer properties -for the printer to which you want the driver assigned. Open the -Windows Explorer, open Network Neighbourhood, browse to the Samba -host, open Samba's Printers folder, right-click the printer icon and -select Properties.... You are now trying to view printer and driver -properties for a queue which has this default NULL driver -assigned. This will result in an error message (this is normal here): -

    Device settings cannot be displayed. The driver -for the specified printer is not installed, only spooler properties -will be displayed. Do you want to install the driver -now?

    -Important:Don't click Yes! Instead, -click No in the error dialog. -Only now you will be presented with the printer properties window. From here, -the way to assign a driver to a printer is open to us. You have now the choice -either: -

    • select a driver from the pop-up list of installed -drivers. Initially this list will be empty. -Or

    • use the New Driver... button to -install a new printer driver (which will in fact start up the -APW).

    -Once the APW is started, the procedure is exactly the same as the one -you are familiar with in Windows (we assume here that you are -familiar with the printer driver installations procedure on Windows -NT). Make sure your connection is in fact setup as a user with -printer admin privileges (if in doubt, use -smbstatus to check for this). If you wish to -install printer drivers for client operating systems other than -Windows NT x86, you will need to use the -Sharing tab of the printer properties dialog. -

    -Assuming you have connected with an administrative (or root) account -(as named by the printer admin parameter), -you will also be able to modify other printer properties such as ACLs -and default device settings using this dialog. For the default device -settings, please consider the advice given further below. -

    Setting Drivers for existing Printers with -rpcclient

    -The second way to install printer drivers into -[print$] and set them up in a valid way can be -done from the UNIX command line. This involves four distinct steps: -

    1. gathering the info about the required driver files -and collecting the files together;

    2. deposit the driver files into the -[print$] share's correct subdirectories -(possibly by using smbclient);

    3. running the rpcclient -commandline utility once with the adddriver -subcommand,

    4. running rpcclient a second -time with the setdriver -subcommand.

    -We will provide detailed hints for each of these steps in the next few -paragraphs. -

    Identifying the Driver Files

    -To find out about the driver files, you have two options: you could -investigate the driver CD which comes with your printer. Study the -*.inf file on the CD, if it is contained. This -may not be the possible, since the *.inf file might be -missing. Unfortunately, many vendors have now started to use their own -installation programs. These installations packages are often some -sort of Windows platform archive format, plus, the files may get -re-named during the installation process. This makes it extremely -difficult to identify the driver files you need. -

    -Then you only have the second option: install the driver first on a -Windows client *locally* and investigate which file names and paths it -uses after they are installed. (Note, that you need to repeat this -procedure for every client platform you want to support. We are going -to show it here for the W32X86 platform only, a -name used by Microsoft for all WinNT/2k/XP clients...) -

    -A good method to recognize the driver files this is to print the test -page from the driver's Properties Dialog -(General tab). Then look at the list of driver -files named on the printout. You'll need to recognize what Windows -(and Samba) are calling the Driver File , the -Data File, the Config File, -the Help File and (optionally) the -Dependent Driver Files (this may vary slightly -for Windows NT). You need to remember all names (or better take a -note) for the next steps. -

    -Another method to quickly test the driver filenames and related paths -is provided by the rpcclient utility. Run it with -enumdrivers or with the -getdriver subcommand, each in the -3 level. In the following example, -TURBO_XP is the name of the Windows PC (in this -case it was a Windows XP Professional laptop, BTW). I had installed -the driver locally to TURBO_XP while kde-bitshop is -the name of the Linux host from which I am working. We could run an -interactive rpcclient session; -then we'd get an rpcclient /> prompt and would -type the subcommands at this prompt. This is left as a good exercise -to the reader. For now we use rpcclient with the --c parameter to execute a single subcommand -line and exit again. This is the method you would use if you want to -create scripts to automate the procedure for a large number of -printers and drivers. Note the different quotes used to overcome the -different spaces in between words: -

    -root# rpcclient -U'Danka%xxxx' -c \
    -	'getdriver "Heidelberg Digimaster 9110 (PS)" 3' TURBO_XP
    -cmd = getdriver "Heidelberg Digimaster 9110 (PS)" 3
    -
    -[Windows NT x86]
    +[print$]--+
    +          |--W32X86           # serves drivers to Windows NT x86
    +          |--WIN40            # serves drivers to Windows 95/98
    +          |--W32ALPHA         # serves drivers to Windows NT Alpha_AXP
    +          |--W32MIPS          # serves drivers to Windows NT R4000
    +          |--W32PPC           # serves drivers to Windows NT PowerPC
    +

    +

    Required permissions

    + In order to add a new driver to your Samba host, one of two conditions must hold true: +

    • + The account used to connect to the Samba host must have a UID of 0 (i.e., a root account). +

    • + The account used to connect to the Samba host must be named in the printer adminlist. +

    + Of course, the connected account must still have write access to add files to the subdirectories beneath + [print$]. Remember that all file shares are set to “read-only” by default. +

    +Once you have created the required [print$] service and +associated subdirectories, go to a Windows NT 4.0/200x/XP client workstation. Open Network +Neighborhood or My Network Places and browse for the Samba host. Once you +have located the server, navigate to its Printers and Faxes folder. You should see +an initial listing of printers that matches the printer shares defined on your Samba host. +

    Installing Drivers into [print$]

    +Have you successfully created the [print$] share in smb.conf, and have your forced Samba +to re-read its smb.conf file? Good. But you are not yet ready to use the new facility. The client driver +files need to be installed into this share. So far it is still an empty share. Unfortunately, it is +not enough to just copy the driver files over. They need to be +correctly installed so that appropriate +records for each driver will exist in the Samba internal databases so it can provide the correct +drivers as they are requested from MS Windows clients. And that is a bit tricky, to say the least. We +now discuss two alternative ways to install the drivers into [print$]: +

    • + Using the Samba commandline utility rpcclient with its various subcommands (here: + adddriver and setdriver) from any UNIX workstation. +

    • + Running a GUI (Printer Properties and Add Printer Wizard) + from any Windows NT/200x/XP client workstation. +

    +The latter option is probably the easier one (even if the process may seem a little bit weird at first). +

    Add Printer Wizard Driver Installation

    +The initial listing of printers in the Samba host's Printers folder accessed from a +client's Explorer will have no real printer driver assigned to them. By default this driver name is set +to a null string. This must be changed now. The local Add Printer Wizard (APW), run from +NT/2000/XP clients, will help us in this task. +

    +Installation of a valid printer driver is not straightforward. You must attempt +to view the printer properties for the printer to which you want the driver assigned. Open the Windows +Explorer, open Network Neighborhood, browse to the Samba host, open Samba's Printers +folder, right-click on the printer icon and select Properties.... You are now trying to +view printer and driver properties for a queue that has this default NULL driver +assigned. This will result in the following error message: +

    + Device settings cannot be displayed. The driver for the specified printer is not installed, + only spooler properties will be displayed. Do you want to install the driver now? +

    +Do not click on Yes! Instead, click on No in the error dialog. +Only now you will be presented with the printer properties window. From here, the way to assign a driver +to a printer is open to us. You now have the choice of: +

    • + Select a driver from the pop-up list of installed drivers. Initially this list will be empty. +

    • + Click on New Driver to install a new printer driver (which will + start up the APW). +

    +Once the APW is started, the procedure is exactly the same as the one you are familiar with in Windows (we +assume here that you are familiar with the printer driver installations procedure on Windows NT). Make sure +your connection is, in fact, setup as a user with printer admin +privileges (if in doubt, use smbstatus to check for this). If you wish to install +printer drivers for client operating systems other than Windows NT x86, +you will need to use the Sharing tab of the printer properties dialog. +

    +Assuming you have connected with an administrative (or root) account (as named by the +printer admin parameter), you will also be able to modify +other printer properties such as ACLs and default device settings using this dialog. For the default +device settings, please consider the advice given further in . +

    Installing Print Drivers Using rpcclient

    +The second way to install printer drivers into [print$] and set them +up in a valid way is to do it from the UNIX command line. This involves four distinct steps: +

    1. + Gather info about required driver files and collect the files. +

    2. + Deposit the driver files into the [print$] share's correct subdirectories + (possibly by using smbclient). +

    3. + Run the rpcclient command line utility once with the adddriver + subcommand. +

    4. + Run rpcclient a second time with the setdriver subcommand. +

    +We provide detailed hints for each of these steps in the paragraphs that follow. +

    Identifying Driver Files

    +To find out about the driver files, you have two options. You could check the contents of the driver +CDROM that came with your printer. Study the *.inf files lcoated on the CDROM. This +may not be possible, since the *.inf file might be missing. Unfortunately, vendors have now started +to use their own installation programs. These installations packages are often in some Windows platform +archive format. Additionally, the files may be re-named during the installation process. This makes it +extremely difficult to identify the driver files required. +

    +Then you only have the second option. Install the driver locally on a Windows client and +investigate which file names and paths it uses after they are installed. (You need to repeat +this procedure for every client platform you want to support. We show it here for the +W32X86 platform only, a name used by Microsoft for all Windows NT/200x/XP +clients.) +

    +A good method to recognize the driver files is to print the test page from the driver's +Properties dialog (General tab). Then look at the list of +driver files named on the printout. You'll need to recognize what Windows (and Samba) are calling the +Driver File, Data File, Config File, +Help File and (optionally) the Dependent Driver Files +(this may vary slightly for Windows NT). You need to take a note of all file names for the next steps. +

    +Another method to quickly test the driver filenames and related paths is provided by the +rpcclient utility. Run it with enumdrivers or with the +getdriver subcommand, each at the 3 info level. In the following example, +TURBO_XP is the name of the Windows PC (in this case it was a Windows XP Professional +laptop). I installed the driver locally to TURBO_XP, from a Samba server called KDE-BITSHOP. +We could run an interactive rpcclient session; then we would get an +rpcclient /> prompt and would type the subcommands at this prompt. This is left as +a good exercise to the reader. For now, we use rpcclient with the -c +parameter to execute a single subcommand line and exit again. This is the method you would use if you +want to create scripts to automate the procedure for a large number of printers and drivers. Note the +different quotes used to overcome the different spaces in between words: +

    +root# rpcclient -U'Danka%xxxx' -c \
    +	'getdriver "Heidelberg Digimaster 9110 (PS)" 3' TURBO_XP
    +cmd = getdriver "Heidelberg Digimaster 9110 (PS)" 3
    +
    +[Windows NT x86]
     Printer Driver Info 3:
       Version: [2]
       Driver Name: [Heidelberg Digimaster 9110 (PS)]
    @@ -6720,58 +6916,47 @@ Printer Driver Info 3:
       
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.DLL]
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.INI]
    -  Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1KMMin.DLL]
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.dat]
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.cat]
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.def]
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.hre]
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.vnd]
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.hlp]
    -  Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de_reg.HLP]
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\HDNIS01Aux.dll]
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\HDNIS01_de.NTF]
       
       Monitorname: []
       Defaultdatatype: []
     

    -You may notice, that this driver has quite a big number of -Dependentfiles (I know worse cases however). Also, -strangely, the Driver File is here tagged as -Driver Path.... oh, well. Here we don't have yet -support for the so-called WIN40 architecture -installed. This name is used by Microsoft for the Win95/98/ME platforms. -If we want to support these, we need to install the Win95/98/ME driver -files in addition to those for W32X86 -(i.e. the WinNT72000/XP clients) onto a Windows PC. This PC -can also host the Win9x drivers, even if itself runs on Windows NT, -2000 or XP. -

    -Since the [print$] share is usually accessible -through the Network Neighbourhood, you can also use the UNC notation -from Windows Explorer to poke at it. The Win9x driver files will end -up in subdirectory "0" of the "WIN40" directory. The full path to -access them will be -\\WINDOWSHOST\print$\WIN40\0\. -

    Note

    more recent drivers on Windows 2000 and Windows XP are -installed into the "3" subdirectory instead of the "2". The version 2 -of drivers, as used in Windows NT, were running in Kernel Mode. -Windows 2000 changed this. While it still can use the Kernel Mode -drivers (if this is enabled by the Admin), its native mode for printer -drivers is User Mode execution. This requires drivers designed for -this. These type of drivers install into the "3" subdirectory. -

    Collecting the Driver Files from a Windows Host's -[print$] Share

    -Now we need to collect all the driver files we identified. in our -previous step. Where do we get them from? Well, why not retrieve them -from the very PC and the same [print$] share -which we investigated in our last step to identify the files? We can -use smbclient to do this. We will use the paths and -names which were leaked to us by getdriver. The +You may notice that this driver has quite a large number of Dependent files +(there are worse cases, however). Also, strangely, the +Driver File is tagged here +Driver Path. We do not yet have support for the so-called +WIN40 architecture installed. This name is used by Microsoft for the Windows +9x/Me platforms. If we want to support these, we need to install the Windows 9x/Me driver files in +addition to those for W32X86 (i.e., the Windows NT72000/XP clients) onto a +Windows PC. This PC can also host the Windows 9x/Me drivers, even if it runs on Windows NT, 2000 or XP. +

    +Since the [print$] share is usually accessible through the Network +Neighborhood, you can also use the UNC notation from Windows Explorer to poke at it. The Windows +9x/Me driver files will end up in subdirectory 0 of the WIN40 +directory. The full path to access them will be \\WINDOWSHOST\print$\WIN40\0\. +

    Note

    +More recent drivers on Windows 2000 and Windows XP are installed into the “3” subdirectory +instead of the “2”. The version 2 of drivers, as used in Windows NT, were running in Kernel +Mode. Windows 2000 changed this. While it still can use the Kernel Mode drivers (if this is enabled by +the Admin), its native mode for printer drivers is User Mode execution. This requires drivers designed +for this. These types of drivers install into the “3” subdirectory. +

    Obtaining Driver Files from Windows Client [print$] Shares

    +Now we need to collect all the driver files we identified in our previous step. Where do we get them +from? Well, why not retrieve them from the very PC and the same [print$] +share that we investigated in our last step to identify the files? We can use smbclient +to do this. We will use the paths and names that were leaked to us by getdriver. The listing is edited to include linebreaks for readability:

    -root# smbclient //TURBO_XP/print\$ -U'Danka%xxxx'	\ 
    -	-c 'cd W32X86/2;mget HD*_de.*             \
    -	hd*ppd Hd*_de.* Hddm*dll HDN*Aux.DLL'
    +root# smbclient //TURBO_XP/print\$ -U'Danka%xxxx' \ 
    +   -c 'cd W32X86/2;mget HD*_de.* hd*ppd Hd*_de.* Hddm*dll HDN*Aux.DLL'
    +
     added interface ip=10.160.51.60 bcast=10.160.51.255 nmask=255.255.252.0
     Got a positive name query response from 10.160.50.8 ( 10.160.50.8 )
     Domain=[DEVELOPMENT] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager]
    @@ -6781,43 +6966,38 @@ getting file \W32X86\2\Hddm91c1_de.def of size 428 as Hddm91c1_de.def
     Get file Hddm91c1_de.DLL? y
     getting file \W32X86\2\Hddm91c1_de.DLL of size 876544 as Hddm91c1_de.DLL
     [...]
    -
     

    -After this command is complete, the files are in our current local -directory. You probably have noticed that this time we passed several -commands to the -c parameter, separated by semi-colons. This -effects that all commands are executed in sequence on the remote -Windows server before smbclient exits again. -

    -Don't forget to repeat the procedure for the WIN40 -architecture should you need to support Win95/98/XP clients. Remember, the -files for these architectures are in the WIN40/0/ subdir. Once we are -complete, we can run smbclient ... put to store -the collected files on the Samba server's -[print$] share. -

    Depositing the Driver Files into [print$]

    -So, now we are going to put the driver files into the -[print$] share. Remember, the UNIX path to this -share has been defined previously in your -. You also have created subdirectories -for the different Windows client types you want to support. Supposing -your [print$] share maps to the UNIX path -/etc/samba/drivers/, your driver files should now -go here: -

    • for all Windows NT, 2000 and XP clients into -/etc/samba/drivers/W32X86/ but -*not*(yet) into the "2" subdir!

    • for all Windows 95, 98 and ME clients into -/etc/samba/drivers/WIN40/ -- but *not* -(yet) into the "0" subdir!

    -We again use smbclient to transfer the driver files across the -network. We specify the same files and paths as were leaked to us by -running getdriver against the original -Windows install. However, now we are going to -store the files into a Samba/UNIX print server's -[print$] share... +After this command is complete, the files are in our current local directory. You probably have noticed +that this time we passed several commands to the -c parameter, separated by semi-colons. +This effects that all commands are executed in sequence on the remote Windows server before smbclient +exits again. +

    +Remember to repeat the procedure for the WIN40 architecture should +you need to support Windows 9x/Me/XP clients. Remember too, the files for these architectures are in the +WIN40/0/ subdirectory. Once this is complete, we can run smbclient ... +put to store the collected files on the Samba server's [print$] +share. +

    Installing Driver Files into [print$]

    +We are now going to locate the driver files into the [print$] +share. Remember, the UNIX path to this share has been defined +previously in your words missing here. You +also have created subdirectories for the different Windows client types you want to +support. Supposing your [print$] share maps to the UNIX path +/etc/samba/drivers/, your driver files should now go here: +

    • + For all Windows NT, 2000 and XP clients into /etc/samba/drivers/W32X86/ but + not (yet) into the 2 subdirectory. +

    • + For all Windows 95, 98 and ME clients into /etc/samba/drivers/WIN40/ but not + (yet) into the 0 subdirectory. +

    +We again use smbclient to transfer the driver files across the network. We specify the same files +and paths as were leaked to us by running getdriver against the original +Windows install. However, now we are going to store the files into a +Samba/UNIX print server's [print$] share.

    -		root# smbclient //SAMBA-CUPS/print\$ -U'root%xxxx' -c \
    - 'cd W32X86; put HDNIS01_de.DLL; \
    +root# smbclient //SAMBA-CUPS/print\$ -U'root%xxxx' -c \
    +  'cd W32X86; put HDNIS01_de.DLL; \
       put Hddm91c1_de.ppd; put HDNIS01U_de.DLL;        \
       put HDNIS01U_de.HLP; put Hddm91c1_de.DLL;        \
       put Hddm91c1_de.INI; put Hddm91c1KMMin.DLL;      \
    @@ -6826,6 +7006,7 @@ store the files into a Samba/UNIX print s
       put Hddm91c1_de.vnd; put Hddm91c1_de.hlp;        \
       put Hddm91c1_de_reg.HLP; put HDNIS01Aux.dll;     \
       put HDNIS01_de.NTF'
    +
     added interface ip=10.160.51.60 bcast=10.160.51.255 nmask=255.255.252.0
     Got a positive name query response from 10.160.51.162 ( 10.160.51.162 )
     Domain=[CUPS-PRINT] OS=[UNIX] Server=[Samba 2.2.7a]
    @@ -6846,30 +7027,26 @@ putting file Hddm91c1_de_reg.HLP as \W32X86\Hddm91c1_de_reg.HLP
     putting file HDNIS01Aux.dll as \W32X86\HDNIS01Aux.dll
     putting file HDNIS01_de.NTF as \W32X86\HDNIS01_de.NTF
     

    -Phewww -- that was a lot of typing! Most drivers are a lot smaller -- -many only having 3 generic PostScript driver files plus 1 PPD. Note, -that while we did retrieve the files from the "2" subdirectory of the -"W32X86" directory from the Windows box, we don't -put them (for now) in this same subdirectory of the Samba box! This -re-location will automatically be done by the -adddriver command which we will run shortly (and -don't forget to also put the files for the Win95/98/ME architecture -into the WIN40/ subdirectory should you need -them). -

    Check if the Driver Files are there (with smbclient)

    -For now we verify that our files are there. This can be done with -smbclient too (but of course you can log in via SSH -also and do this through a standard UNIX shell access too): + +Whew that was a lot of typing! Most drivers are a lot smaller many only having three generic +PostScript driver files plus one PPD. While we did retrieve the files from the 2 +subdirectory of the W32X86 directory from the Windows box, we do not put them +(for now) in this same subdirectory of the Samba box. This relocation will automatically be done by the +adddriver command, which we will run shortly (and do not forget to also put the files +for the Windows 9x/Me architecture into the WIN40/ subdirectory should you need them). +

    smbclient to Confirm Driver Installation

    +For now we verify that our files are there. This can be done with smbclient, too +(but, of course, you can log in via SSH also and do this through a standard UNIX shell access):

     root# smbclient //SAMBA-CUPS/print\$ -U 'root%xxxx' \
     	-c 'cd W32X86; pwd; dir; cd 2; pwd; dir'
      added interface ip=10.160.51.60 bcast=10.160.51.255 nmask=255.255.252.0
     Got a positive name query response from 10.160.51.162 ( 10.160.51.162 )
    -Domain=[CUPS-PRINT] OS=[UNIX] Server=[Samba 2.2.7a]
    +Domain=[CUPS-PRINT] OS=[UNIX] Server=[Samba 2.2.8a]
     
     Current directory is \\SAMBA-CUPS\print$\W32X86\
    -.                                   D        0  Sun May  4 03:56:35 2003
    -..                                  D        0  Thu Apr 10 23:47:40 2003
    +.                                  D        0  Sun May  4 03:56:35 2003
    +..                                 D        0  Thu Apr 10 23:47:40 2003
     2                                   D        0  Sun May  4 03:56:18 2003
     HDNIS01Aux.dll                      A    15356  Sun May  4 03:58:59 2003
     Hddm91c1KMMin.DLL                   A    46966  Sun May  4 03:58:59 2003
    @@ -6889,8 +7066,8 @@ Hddm91c1_de_reg.HLP                 A   228417  Sun May  4 03:58:59 2003
                   40976 blocks of size 262144. 709 blocks available
     
     Current directory is \\SAMBA-CUPS\print$\W32X86\2\
    -.                                   D        0  Sun May  4 03:56:18 2003
    -..                                  D        0  Sun May  4 03:56:35 2003
    +.                                  D        0  Sun May  4 03:56:18 2003
    +..                                 D        0  Sun May  4 03:56:35 2003
     ADOBEPS5.DLL                        A   434400  Sat May  3 23:18:45 2003
     laserjet4.ppd                       A     9639  Thu Apr 24 01:05:32 2003
     ADOBEPSU.DLL                        A   109568  Sat May  3 23:18:45 2003
    @@ -6898,76 +7075,64 @@ ADOBEPSU.HLP                        A    18082  Sat May  3 23:18:45 2003
     PDFcreator2.PPD                     A    15746  Sun Apr 20 22:24:07 2003
                   40976 blocks of size 262144. 709 blocks available
     

    -Notice that there are already driver files present in the -2 subdir (probably from a previous -installation). Once the files for the new driver are there too, you -are still a few steps away from being able to use them on the -clients. The only thing you could do *now* is to retrieve them from a -client just like you retrieve ordinary files from a file share, by -opening print$ in Windows Explorer. But that wouldn't install them per -Point'n'Print. The reason is: Samba doesn't know yet that these files -are something special, namely printer driver -files and it doesn't know yet to which print queue(s) these -driver files belong. -

    Running rpcclient with -adddriver

    -So, next you must tell Samba about the special category of the files -you just uploaded into the [print$] share. This -is done by the adddriver command. It will -prompt Samba to register the driver files into its internal TDB -database files. The following command and its output has been edited, -again, for readability: +Notice that there are already driver files present in the 2 subdirectory (probably +from a previous installation). Once the files for the new driver are there too, you are still a few +steps away from being able to use them on the clients. The only thing you could do now is to retrieve +them from a client just like you retrieve ordinary files from a file share, by opening print$ in Windows +Explorer. But that wouldn't install them per Point'n'Print. The reason +is: Samba does not yet know that +these files are something special, namely printer driver files and it does not know +to which print queue(s) these driver files belong. +

    Running rpcclient with adddriver

    +Next, you must tell Samba about the special category of the files you just uploaded into the +[print$] share. This is done by the adddriver +command. It will prompt Samba to register the driver files into its internal TDB database files. The +following command and its output has been edited, again, for readability:

    -		root# rpcclient -Uroot%xxxx -c 'adddriver "Windows NT x86" \
    -"dm9110:HDNIS01_de.DLL: \
    -Hddm91c1_de.ppd:HDNIS01U_de.DLL:HDNIS01U_de.HLP:   \
    - NULL:RAW:Hddm91c1_de.DLL,Hddm91c1_de.INI,          \
    - Hddm91c1_de.dat,Hddm91c1_de.def,Hddm91c1_de.hre,   \
    - Hddm91c1_de.vnd,Hddm91c1_de.hlp,Hddm91c1KMMin.DLL, \
    - HDNIS01Aux.dll,HDNIS01_de.NTF,                     \
    - Hddm91c1_de_reg.HLP' SAMBA-CUPS
    +root# rpcclient -Uroot%xxxx -c 'adddriver "Windows NT x86" \
    +  "dm9110:HDNIS01_de.DLL: \
    +  Hddm91c1_de.ppd:HDNIS01U_de.DLL:HDNIS01U_de.HLP:   \
    +  NULL:RAW:Hddm91c1_de.DLL,Hddm91c1_de.INI,          \
    +  Hddm91c1_de.dat,Hddm91c1_de.def,Hddm91c1_de.hre,   \
    +  Hddm91c1_de.vnd,Hddm91c1_de.hlp,Hddm91c1KMMin.DLL, \
    +  HDNIS01Aux.dll,HDNIS01_de.NTF,                     \
    +  Hddm91c1_de_reg.HLP' SAMBA-CUPS
     
     cmd = adddriver "Windows NT x86" \
    -"dm9110:HDNIS01_de.DLL:Hddm91c1_de.ppd:HDNIS01U_de.DLL:    \
    - HDNIS01U_de.HLP:NULL:RAW:Hddm91c1_de.DLL,Hddm91c1_de.INI, \
    - Hddm91c1_de.dat,Hddm91c1_de.def,Hddm91c1_de.hre,          \
    - Hddm91c1_de.vnd,Hddm91c1_de.hlp,Hddm91c1KMMin.DLL,        \
    - HDNIS01Aux.dll,HDNIS01_de.NTF,Hddm91c1_de_reg.HLP"
    +  "dm9110:HDNIS01_de.DLL:Hddm91c1_de.ppd:HDNIS01U_de.DLL:   \
    +  HDNIS01U_de.HLP:NULL:RAW:Hddm91c1_de.DLL,Hddm91c1_de.INI, \
    +  Hddm91c1_de.dat,Hddm91c1_de.def,Hddm91c1_de.hre,          \
    +  Hddm91c1_de.vnd,Hddm91c1_de.hlp,Hddm91c1KMMin.DLL,        \
    +  HDNIS01Aux.dll,HDNIS01_de.NTF,Hddm91c1_de_reg.HLP"
     
     Printer Driver dm9110 successfully installed.
    -
     

    -After this step the driver should be recognized by Samba on the print -server. You need to be very careful when typing the command. Don't -exchange the order of the fields. Some changes would lead to a -NT_STATUS_UNSUCCESSFUL error -message. These become obvious. Other changes might install the driver -files successfully, but render the driver unworkable. So take care! -Hints about the syntax of the adddriver command are in the man -page. The CUPS printing chapter of this HOWTO collection provides a -more detailed description, if you should need it. -

    Check how Driver Files have been moved after -adddriver finished

    -One indication for Samba's recognition of the files as driver files is -the successfully installed message. -Another one is the fact, that our files have been moved by the -adddriver command into the 2 -subdirectory. You can check this again with -smbclient: +After this step, the driver should be recognized by Samba on the print server. You need to be very +careful when typing the command. Don't exchange the order of the fields. Some changes would lead to +an NT_STATUS_UNSUCCESSFUL error message. These become obvious. Other +changes might install the driver files successfully, but render the driver unworkable. So take care! +Hints about the syntax of the adddriver command are in the man page. The CUPS printing chapter +provides a more detailed description, should you need it. +

    Checking adddriver Completion

    +One indication for Samba's recognition of the files as driver files is the successfully +installed message. Another one is the fact that our files have been moved by the +adddriver command into the 2 subdirectory. You can check this +again with smbclient:

    -root# smbclient //SAMBA-CUPS/print\$ -Uroot%xx -c 'cd W32X86;dir;pwd;cd 2;dir;pwd'
    +root# smbclient //SAMBA-CUPS/print\$ -Uroot%xx \
    +	-c 'cd W32X86;dir;pwd;cd 2;dir;pwd'
      added interface ip=10.160.51.162 bcast=10.160.51.255 nmask=255.255.252.0
      Domain=[CUPS-PRINT] OS=[UNIX] Server=[Samba 2.2.7a]
     
       Current directory is \\SAMBA-CUPS\print$\W32X86\
    -  .                                   D        0  Sun May  4 04:32:48 2003
    -  ..                                  D        0  Thu Apr 10 23:47:40 2003
    +  .                                  D        0  Sun May  4 04:32:48 2003
    +  ..                                 D        0  Thu Apr 10 23:47:40 2003
       2                                   D        0  Sun May  4 04:32:48 2003
                     40976 blocks of size 262144. 731 blocks available 
     
       Current directory is \\SAMBA-CUPS\print$\W32X86\2\
    -  .                                   D        0  Sun May  4 04:32:48 2003
    -  ..                                  D        0  Sun May  4 04:32:48 2003
    +  .                                  D        0  Sun May  4 04:32:48 2003
    +  ..                                 D        0  Sun May  4 04:32:48 2003
       DigiMaster.PPD                      A   148336  Thu Apr 24 01:07:00 2003
       ADOBEPS5.DLL                        A   434400  Sat May  3 23:18:45 2003
       laserjet4.ppd                       A     9639  Thu Apr 24 01:05:32 2003
    @@ -6990,62 +7155,54 @@ subdirectory. You can check this again with
       HDNIS01U_de.HLP                     A    19770  Sun May  4 04:32:18 2003
       Hddm91c1_de_reg.HLP                 A   228417  Sun May  4 04:32:18 2003
                     40976 blocks of size 262144. 731 blocks available
    -
     

    -Another verification is that the timestamp of the printing TDB files -is now updated (and possibly their filesize has increased). -

    Check if the Driver is recognized by Samba

    -Now the driver should be registered with Samba. We can easily verify -this, and will do so in a moment. However, this driver is -not yet associated with a particular -printer. We may check the driver status of the -files by at least three methods: -

    • from any Windows client browse Network Neighbourhood, -find the Samba host and open the Samba Printers and -Faxes folder. Select any printer icon, right-click and -select the printer Properties. Click on the -Advanced tab. Here is a field indicating the -driver for that printer. A drop down menu allows you to change that -driver (be careful to not do this unwittingly.). You can use this -list to view all drivers know to Samba. Your new one should be amongst -them. (Each type of client will only see his own architecture's -list. If you don't have every driver installed for each platform, the -list will differ if you look at it from Windows95/98/ME or -WindowsNT/2000/XP.)

    • from a Windows 2000 or XP client (not WinNT) browse -Network Neighbourhood, search for the Samba -server and open the server's Printers folder, -right-click the white background (with no printer highlighted). Select -Server Properties. On the -Drivers tab you will see the new driver listed -now. This view enables you to also inspect the list of files belonging -to that driver (this doesn't work on Windows NT, but only on -Windows 2000 and Windows XP. WinNT doesn't provide the "Drivers" -tab).. An alternative, much quicker method for Windows -2000/XP to start this dialog is by typing into a DOS box (you must of -course adapt the name to your Samba server instead of SAMBA-CUPS): -

      rundll32 printui.dll,PrintUIEntry /s /t2 /n\\SAMBA-CUPS

    • from a UNIX prompt run this command (or a variant -thereof), where SAMBA-CUPS is the name of the Samba -host and "xxxx" represents the actual Samba password assigned to root: -

      rpcclient -U'root%xxxx' -c 'enumdrivers' SAMBA-CUPS

      -You will see a listing of all drivers Samba knows about. Your new one -should be amongst them. But it is only listed under the [Windows NT -x86] heading, not under [Windows 4.0], -since we didn't install that part. Or did *you*? -- You will see a listing of -all drivers Samba knows about. Your new one should be amongst them. In our -example it is named dm9110. Note that the 3rd column -shows the other installed drivers twice, for each supported architecture one -time. Our new driver only shows up for -Windows NT 4.0 or 2000. To -have it present for Windows 95, 98 and ME you'll -have to repeat the whole procedure with the WIN40 architecture and subdirectory. -

    A side note: you are not bound to specific driver names

    -You can name the driver as you like. If you repeat the -adddriver step, with the same files as before, but -with a different driver name, it will work the same: +Another verification is that the timestamp of the printing TDB files is now updated +(and possibly their file size has increased). +

    Check Samba for Driver Recognition

    +Now the driver should be registered with Samba. We can easily verify this, and will do so in a +moment. However, this driver is not yet associated with a particular printer. We may check the driver +status of the files by at least three methods: +

    • + From any Windows client browse Network Neighborhood, find the Samba host and open the Samba + Printers and Faxes folder. Select any printer icon, right-click and select + the printer Properties. Click the Advanced + tab. Here is a field indicating the driver for that printer. A drop-down menu allows you to + change that driver (be careful not to do this unwittingly). You can use this list to view + all drivers known to Samba. Your new one should be among them. (Each type of client will only + see his own architecture's list. If you do not have every driver installed for each platform, + the list will differ if you look at it from Windows95/98/ME or WindowsNT/2000/XP.) +

    • + From a Windows 200x/XP client (not Windows NT) browse Network Neighborhood, + search for the Samba server and open the server's Printers folder, + right-click on the white background (with no printer highlighted). Select Server + Properties. On the Drivers tab you will see the new driver + listed. This view enables you to also inspect the list of files belonging to that driver + (this does not work on Windows NT, but only on Windows 2000 and Windows XP; Windows NT does not + provide the Drivers tab). An + alternative and much quicker method for + Windows 2000/XP to start this dialog is by typing into a DOS box (you must of course adapt the + name to your Samba server instead of SAMBA-CUPS): +

      rundll32 printui.dll,PrintUIEntry /s /t2 /n\\SAMBA-CUPS

    • + From a UNIX prompt, run this command (or a variant thereof) where + SAMBA-CUPS is the name of the Samba host and xxxx represents the + actual Samba password assigned to root: +

      rpcclient -U'root%xxxx' -c 'enumdrivers' SAMBA-CUPS

      + You will see a listing of all drivers Samba knows about. Your new one should be among + them. But it is only listed under the [Windows NT x86] heading, not under + [Windows 4.0], since you didn't install that part. Or did you? + You will see a listing of all drivers Samba knows about. Your new one should be among them. In + our example it is named dm9110. Note that the third column shows the other + installed drivers twice, one time for each supported architecture. Our new driver only shows up + for Windows NT 4.0 or 2000. To have it present for Windows + 95, 98 and ME, you'll have to repeat the whole procedure with the WIN40 architecture + and subdirectory. +

    Specific Driver Name Flexibility

    +You can name the driver as you like. If you repeat the adddriver step with the same +files as before but with a different driver name, it will work the same:

    -root# rpcclient -Uroot%xxxx                                        \
    +root# rpcclient -Uroot%xxxx         \
       -c 'adddriver "Windows NT x86"                     \
    -  "myphantasydrivername:HDNIS01_de.DLL:              \
    +  "mydrivername:HDNIS01_de.DLL:              \
       Hddm91c1_de.ppd:HDNIS01U_de.DLL:HDNIS01U_de.HLP:   \
       NULL:RAW:Hddm91c1_de.DLL,Hddm91c1_de.INI,          \
       Hddm91c1_de.dat,Hddm91c1_de.def,Hddm91c1_de.hre,   \
    @@ -7053,345 +7210,292 @@ with a different driver name, it will work the same:
       HDNIS01Aux.dll,HDNIS01_de.NTF,Hddm91c1_de_reg.HLP' SAMBA-CUPS
       
     
    - cmd = adddriver "Windows NT x86" 
    -                 "myphantasydrivername:HDNIS01_de.DLL:Hddm91c1_de.ppd:HDNIS01U_de.DLL:\
    -                  HDNIS01U_de.HLP:NULL:RAW:Hddm91c1_de.DLL,Hddm91c1_de.INI,           \
    -                  Hddm91c1_de.dat,Hddm91c1_de.def,Hddm91c1_de.hre,                    \
    -                  Hddm91c1_de.vnd,Hddm91c1_de.hlp,Hddm91c1KMMin.DLL,                  \
    -                  HDNIS01Aux.dll,HDNIS01_de.NTF,Hddm91c1_de_reg.HLP"
    -
    - Printer Driver myphantasydrivername successfully installed.
    -
    -

    -You will also be able to bind that driver to any print queue (however, -you are responsible yourself that you associate drivers to queues -which make sense to the target printer). Note, that you can't run the -rpcclient adddriver command -repeatedly. Each run "consumes" the files you had put into the -[print$] share by moving them into the -respective subdirectories. So you must precede an -smbclient ... put command before each -rpcclient ... adddriver" command. -

    Running rpcclient with -setdriver

    -Samba still needs to know which printer's driver -this is. It needs to create a mapping of the driver to a printer, and -store this info in its "memory", the TDB files. The rpcclient -setdriver command achieves exactly this: +cmd = adddriver "Windows NT x86" \ + "mydrivername:HDNIS01_de.DLL:Hddm91c1_de.ppd:HDNIS01U_de.DLL:\ + HDNIS01U_de.HLP:NULL:RAW:Hddm91c1_de.DLL,Hddm91c1_de.INI, \ + Hddm91c1_de.dat,Hddm91c1_de.def,Hddm91c1_de.hre, \ + Hddm91c1_de.vnd,Hddm91c1_de.hlp,Hddm91c1KMMin.DLL, \ + HDNIS01Aux.dll,HDNIS01_de.NTF,Hddm91c1_de_reg.HLP" + +Printer Driver mydrivername successfully installed. +

    +You will be able to bind that driver to any print queue (however, you are responsible that +you associate drivers to queues that make sense with respect to target printers). You cannot run the +rpcclient adddriver command repeatedly. Each run consumes the +files you had put into the [print$] share by moving them into the +respective subdirectories. So you must execute an smbclient ... put command before +each rpcclient ... adddriver command. +

    Running rpcclient with the setdriver

    +Samba needs to know which printer owns which driver. Create a mapping of the driver to a printer, and +store this info in Samba's memory, the TDB files. The rpcclient setdriver command +achieves exactly this:

    -root# rpcclient -U'root%xxxx' -c 'setdriver dm9110 myphantasydrivername' SAMBA-CUPS
    - cmd = setdriver dm9110 myphantasydrivername
    - Successfully set dm9110 to driver myphantasydrivername.
    +root# rpcclient -U'root%xxxx' -c 'setdriver dm9110 mydrivername' SAMBA-CUPS
    + cmd = setdriver dm9110 mydrivername
    +
    +Successfully set dm9110 to driver mydrivername.
     

    -Ahhhhh -- no, I didn't want to do that. Repeat, this time with the -name I intended: +Ah, no, I did not want to do that. Repeat, this time with the name I intended:

     root# rpcclient -U'root%xxxx' -c 'setdriver dm9110 dm9110' SAMBA-CUPS
      cmd = setdriver dm9110 dm9110
    - Successfully set dm9110 to driver dm9110.
    -

    -The syntax of the command is rpcclient --U'root%sambapassword' -c 'setdriver -"printername" -"drivername' -SAMBA-Hostname . -- -Now we have done *most* of the work. But not yet all.... +Successfully set dm9110 to driver dm9110. +

    +The syntax of the command is: +

    +rpcclient -U'root%sambapassword' -c 'setdriver printername \
    + drivername' SAMBA-Hostname. 
    +

    +Now we have done most of the work, but not all of it.

    Note

    -the setdriver command will only succeed if the printer is -known to -Samba already. A bug in 2.2.x prevented Samba from recognizing freshly -installed printers. You had to restart Samba, or at least send a HUP -signal to all running smbd processes to work around this: -kill -HUP `pidof smbd`.

    Client Driver Install Procedure

    -A famous philosopher said once: “The Proof of the Pudding lies -in the Eating”. The proof for our setup lies in the printing. -So let's install the printer driver onto the client PCs. This is not -as straightforward as it may seem. Read on. -

    The first Client Driver Installation

    -Especially important is the installation onto the first client PC (for -each architectural platform separately). Once this is done correctly, -all further clients are easy to setup and shouldn't need further -attention. What follows is a description for the recommended first -procedure. You work now from a client workstation. First you should -guarantee that your connection is not unwittingly mapped to -bad user "nobody". In a DOS box type: +The setdriver command will only succeed if the +printer is already known to Samba. A +bug in 2.2.x prevented Samba from recognizing freshly installed printers. You had to restart Samba, +or at least send an HUP signal to all running smbd processes to work around this: kill -HUP +`pidof smbd`. +

    Client Driver Installation Procedure

    +As Don Quixote said: “The proof of the pudding is in the eating.” The proof +for our setup lies in the printing. So let's install the printer driver onto the client PCs. This is +not as straightforward as it may seem. Read on. +

    First Client Driver Installation

    +Especially important is the installation onto the first client PC (for each architectural platform +separately). Once this is done correctly, all further clients are easy to setup and shouldn't need further +attention. What follows is a description for the recommended first procedure. You work now from a client +workstation. You should guarantee that your connection is not unwittingly mapped to bad +user nobody. In a DOS box type:

    net use \\SAMBA-SERVER\print$ /user:root

    -Replace root, if needed, by another valid -printer admin user as given in the definition. -Should you already be connected as a different user, you'll get an error -message. There is no easy way to get rid of that connection, because -Windows doesn't seem to know a concept of "logging off" from a share -connection (don't confuse this with logging off from the local -workstation; that is a different matter). You can try to close -all Windows file explorer and Internet Explorer -windows. As a last resort, you may have to reboot. Make sure there is -no automatic re-connection set up. It may be easier to go to a -different workstation and try from there. After you have made sure you -are connected as a printer admin user (you can check this with the -smbstatus command on Samba) do this from the -Windows workstation: -

    • Open Network -Neighbourhood

    • Browse to Samba server

    • Open its Printers and -Faxes folder

    • Highlight and right-click the printer

    • Select Connect... (for WinNT4/2K -it is possibly Install...)

    -A new printer (named printername on -samba-server) should now have appeared in your -local Printer folder (check Start -- -Settings -- Control Panel --- Printers and Faxes). -

    -Most likely you are now tempted to try and print a test page. After -all, you now can open the printer properties and on the "General" tab, -there is a button offering to do just that. But chances are that you -get an error message saying Unable to print Test -Page. The reason might be that there is not yet a -valid Device Mode set for the driver, or that the "Printer Driver -Data" set is still incomplete. -

    -You must now make sure that a valid "Device Mode" is set for the -driver. Don't fear -- we will explain now what that means. -

    IMPORTANT! Setting Device Modes on new Printers

    -In order for a printer to be truly usable by a Windows NT/2K/XP -client, it must possess: -

    • a valid Device Mode generated by -the driver for the printer (defining things like paper size, -orientation and duplex settings), and

    • a complete set of -Printer Driver Data generated by the -driver.

    -If either one of these is incomplete, the clients can produce less -than optimal output at best. In the worst cases, unreadable garbage or -nothing at all comes from the printer or they produce a harvest of -error messages when attempting to print. Samba stores the named values -and all printing related info in its internal TDB database files -(ntprinters.tdb, -ntdrivers.tdb, printing.tdb -and ntforms.tdb). -

    -What do these two words stand for? Basically, the Device Mode and the -set of Printer Driver Data is a collection of settings for all print -queue properties, initialized in a sensible way. Device Modes and -Printer Driver Data should initially be set on the print server (that is -here: the Samba host) to healthy values so that the clients can start -to use them immediately. How do we set these initial healthy values? -This can be achieved by accessing the drivers remotely from an NT (or -2k/XP) client, as is discussed in the next paragraphs. -

    -Be aware, that a valid Device Mode can only be initiated by a -printer admin, or root (the reason should be -obvious). Device Modes can only correctly be set by executing the -printer driver program itself. Since Samba can not execute this Win32 -platform driver code, it sets this field initially to NULL (which is -not a valid setting for clients to use). Fortunately, most drivers -generate themselves the Printer Driver Data that is needed, when they -are uploaded to the [print$] share with the -help of the APW or rpcclient. -

    -The generation and setting of a first valid Device Mode however -requires some "tickling" from a client, to set it on the Samba -server. The easiest means of doing so is to simply change the page -orientation on the server's printer. This "executes" enough of the -printer driver program on the client for the desired effect to happen, -and feeds back the new Device Mode to our Samba server. You can use the -native Windows NT/2K/XP printer properties page from a Window client -for this: -

    • Browse the Network Neighbourhood

    • Find the Samba server

    • Open the Samba server's Printers and - Faxes folder

    • Highlight the shared printer in question

    • Right-click the printer (you may already be here, if you -followed the last section's description)

    • At the bottom of the context menu select -Properties.... (if the menu still offers the -Connect... entry -further above, you need to click that one first to achieve the driver -installation as shown in the last section)

    • Go to the Advanced tab; click on -Printing Defaults...

    • Change the "Portrait" page setting to "Landscape" (and -back)

    • (Oh, and make sure to apply -changes between swapping the page orientation to cause the change to -actually take effect...).

    • While you're at it, you may optionally also want to -set the desired printing defaults here, which then apply to all future -client driver installations on the remaining from now -on.

    -This procedure has executed the printer driver program on the client -platform and fed back the correct Device Mode to Samba, which now -stored it in its TDB files. Once the driver is installed on the -client, you can follow the analogous steps by accessing the -local Printers folder too if you are -a Samba printer admin user. From now on printing should work as expected. -

    -Samba also includes a service level parameter name default -devmode for generating a default Device Mode for a -printer. Some drivers will function well with Samba's default set of -properties. Others may crash the client's spooler service. So use this -parameter with caution. It is always better to have the client -generate a valid device mode for the printer and store it on the -server for you. -

    Further Client Driver Install Procedures

    -Every further driver may be done by any user, along the lines -described above: Browse network, open printers folder on Samba server, -right-click printer and choose Connect.... Once -this completes (should be not more than a few seconds, but could also take -a minute, depending on network conditions), you should find the new printer in -your client workstation local Printers and -Faxes folder. +Replace root, if needed, by another valid printer admin user as given in +the definition. Should you already be connected as a different user, you will get an error message. There +is no easy way to get rid of that connection, because Windows does not seem to know a concept of logging +off from a share connection (do not confuse this with logging off from the local workstation; that is +a different matter). You can try to close all Windows file explorer +and Internet Explorer for Windows. As +a last resort, you may have to reboot. Make sure there is no automatic reconnection set up. It may be +easier to go to a different workstation and try from there. After you have made sure you are connected +as a printer admin user (you can check this with the smbstatus command on Samba), +do this from the Windows workstation: +

    1. + Open Network Neighborhood. +

    2. + Browse to Samba server. +

    3. + Open its Printers and Faxes folder. +

    4. + Highlight and right-click on the printer. +

    5. + Select Connect (for Windows NT4/200x + it is possibly Install). +

    +A new printer (named printername on Samba-server) should now have +appeared in your local Printer folder (check Start -- +Settings -- Control Panel -- Printers +and Faxes). +

    +Most likely you are now tempted to try to print a test page. After all, you now can open the printer +properties, and on the General tab there is a button offering to do just that. But +chances are that you get an error message saying Unable to print Test Page. The +reason might be that there is not yet a valid Device Mode set for the driver, or that the “Printer +Driver Data” set is still incomplete. +

    +You must make sure that a valid Device Mode is set for the +driver. We now explain what that means. +

    Setting Device Modes on New Printers

    +For a printer to be truly usable by a Windows NT/200x/XP client, it must possess: +

    • + A valid Device Mode generated by the driver for the printer (defining things + like paper size, orientation and duplex settings). +

    • + A complete set of Printer Driver Data generated by the driver. +

    +If either of these is incomplete, the clients can produce less than optimal output at best. In the +worst cases, unreadable garbage or nothing at all comes from the printer or it produces a harvest of +error messages when attempting to print. Samba stores the named values and all printing related information in +its internal TDB database files (ntprinters.tdb, ntdrivers.tdb, +printing.tdb and ntforms.tdb). +

    +What do these two words stand for? Basically, the Device Mode and the set of Printer Driver Data is a +collection of settings for all print queue properties, initialized in a sensible way. Device Modes and +Printer Driver Data should initially be set on the print server (the Samba host) to healthy +values so the clients can start to use them immediately. How do we set these initial healthy values? +This can be achieved by accessing the drivers remotely from an NT (or 200x/XP) client, as is discussed +in the following paragraphs. +

    +Be aware that a valid Device Mode can only be initiated by a +printer admin, or root +(the reason should be obvious). Device Modes can only be correctly +set by executing the printer driver program itself. Since Samba cannot execute this Win32 platform driver +code, it sets this field initially to NULL (which is not a valid setting for clients to use). Fortunately, +most drivers automatically generate the Printer Driver Data that is needed when they are uploaded to the +[print$] share with the help of the APW or rpcclient. +

    +The generation and setting of a first valid Device Mode, however, requires some tickling from a client, +to set it on the Samba server. The easiest means of doing so is to simply change the page orientation on +the server's printer. This executes enough of the printer driver program on the client for the desired +effect to happen, and feeds back the new Device Mode to our Samba server. You can use the native Windows +NT/200x/XP printer properties page from a Window client for this: +

    1. + Browse the Network Neighborhood. +

    2. + Find the Samba server. +

    3. + Open the Samba server's Printers and Faxes folder. +

    4. + Highlight the shared printer in question. +

    5. + Right-click on the printer (you may already be here, if you followed the last section's description). +

    6. + At the bottom of the context menu select Properties (if the menu still offers the + Connect entry further above, you + need to click on that one first to achieve the driver + installation as shown in the last section). +

    7. + Go to the Advanced tab; click on Printing Defaults. +

    8. + Change the Portrait page setting to Landscape (and back). +

    9. + Make sure to apply changes between swapping the page orientation to cause the change to actually take effect. +

    10. + While you are at it, you may also want to set the desired printing defaults here, which then apply to all future + client driver installations on the remaining from now on. +

    +This procedure has executed the printer driver program on the client platform and fed back the correct +Device Mode to Samba, which now stored it in its TDB files. Once the driver is installed on the client, +you can follow the analogous steps by accessing the local Printers +folder, too, if you are a Samba printer admin user. From now on, printing should work as expected. +

    +Samba includes a service level parameter name default devmode for generating a default +Device Mode for a printer. Some drivers will function well with Samba's default set of properties. Others +may crash the client's spooler service. So use this parameter with caution. It is always better to have +the client generate a valid device mode for the printer and store it on the server for you. +

    Additional Client Driver Installation

    +Every additional driver may be installed, along the lines described +above. Browse network, open the +Printers folder on Samba server, right-click on Printer and choose +Connect.... Once this completes (should be not more than a few seconds, +but could also take a minute, depending on network conditions), you should find the new printer in your +client workstation local Printers and Faxes folder.

    You can also open your local Printers and Faxes folder by -using this command on Windows 2000 and Windows XP Professional workstations: -

    rundll32 shell32.dll,SHHelpShortcuts_RunDLL PrintersFolder -

    +using this command on Windows 200x/XP Professional workstations: +

    rundll32 shell32.dll,SHHelpShortcuts_RunDLL PrintersFolder

    or this command on Windows NT 4.0 workstations:

    rundll32 shell32.dll,Control_RunDLL MAIN.CPL @2

    -You can enter the commands either inside a DOS box window -or in the Run command... field from the -Start menu. -

    Always make first Client Connection as root or "printer admin"

    -After you installed the driver on the Samba server (in its -[print$] share, you should always make sure -that your first client installation completes correctly. Make it a habit for -yourself to build that the very first connection from a client as -printer admin. This is to make sure that: -

    • a first valid Device Mode is -really initialized (see above for more explanation details), and -that

    • the default print settings of your printer for all -further client installations are as you want them

    -Do this by changing the orientation to landscape, click -Apply, and then change it back again. Then modify -the other settings (for example, you don't want the default media size -set to Letter, when you are all using -A4, right? You may want to set the printer for -duplex as the default; etc.). -

    -To connect as root to a Samba printer, try this command from a Windows -2K/XP DOS box command prompt: +You can enter the commands either inside a DOS box window or in the Run +command... field from the Start menu. +

    Always Make First Client Connection as root or “printer admin

    +After you installed the driver on the Samba server (in its [print$] +share, you should always make sure that your first client installation completes correctly. Make it a +habit for yourself to build the very first connection from a client as printer admin. This is to make sure that: +

    • + A first valid Device Mode is really initialized (see above for more + explanation details). +

    • + The default print settings of your printer for all further client installations are as you want them. +

    +Do this by changing the orientation to landscape, click on Apply, and then change it +back again. Next, modify the other settings (for example, you do not want the default media size set to +Letter when you are all using A4, right? You may want to set the +printer for duplex as the default, and so on). +

    +To connect as root to a Samba printer, try this command from a Windows 200x/XP DOS box command prompt:

     C:\> runas /netonly /user:root "rundll32 printui.dll,PrintUIEntry /p /t3 /n 
     	\\SAMBA-SERVER\printername"
     

    You will be prompted for root's Samba-password; type it, wait a few -seconds, click on Printing Defaults... and -proceed to set the job options as should be used as defaults by all -clients. Alternatively, instead of root you can name one other member -of the printer admin from the setting. -

    -Now all the other users downloading and installing the driver -the same way (called Point'n'Print) will -have the same defaults set for them. If you miss this step you'll -get a lot of helpdesk calls from your users. But maybe you like to -talk to people.... ;-) -

    Other Gotchas

    -Your driver is installed. It is ready for -Point'n'Print installation by the clients -now. You may have tried to download and use it -onto your first client machine now. But wait... let's make you -acquainted first with a few tips and tricks you may find useful. For -example, suppose you didn't manage to "set the defaults" on the -printer, as advised in the preceding paragraphs? And your users -complain about various issues (such as “We need to set the paper -size for each job from Letter to A4 and it won't store it!”) -

    Setting Default Print Options for the Client Drivers

    +seconds, click on Printing +Defaults, and proceed to set the job options that should be used as defaults by all +clients. Alternately, instead of root you can name one other member of the printer admin from the setting. +

    + Now all the other users downloading and installing the driver the same way (called +“Point'n'Print”) will have the same defaults set for them. If you miss this step +you'll get a lot of Help Desk calls from your users, but maybe you like to talk to people. +

    Other Gotchas

    +Your driver is installed. It is now ready for Point'n'Print +installation by the clients. You may have tried to download and use it +onto your first client machine, but +wait. Let's make sure you are acquainted first with a few tips and tricks you may find useful. For example, +suppose you did not set the defaults on the printer, as advised in the preceding +paragraphs. Your users complain about various issues (such as, “We need to set the paper size +for each job from Letter to A4 and it will not store it.”) +

    Setting Default Print Options for Client Drivers

    The last sentence might be viewed with mixed feelings by some users and -admins. They have struggled for hours and hours and couldn't arrive at -a point were their settings seemed to be saved. It is not their -fault. The confusing thing is this: in the multi-tabbed dialog that pops -up when you right-click the printer name and select -Properties..., you can arrive at two identically -looking dialogs, each claiming that they help you to set printer options, -in three different ways. Here is the definite answer to the "Samba -Default Driver Setting FAQ": -

    I can't set and save default print options -for all users on Win2K/XP! Why not?”  -How are you doing it? I bet the wrong way.... (it is not very -easy to find out, though). There are 3 different ways to bring you to -a dialog that seems to set everything. All three -dialogs look the same. Only one of them -does what you intend. -Important: you need to be Administrator or Print -Administrator to do this for all users. Here is how I reproduce it in -on XP Professional: - -

    1. The first "wrong" way: - -

      1. Open the Printers -folder.

      2. Right-click on the printer -(remoteprinter on cupshost) and -select in context menu Printing -Preferences...

      3. Look at this dialog closely and remember what it looks -like.

      -

    2. The second "wrong" way: - -

      1. Open the Printers -folder.

      2. Right-click on the printer (remoteprinter on -cupshost) and select in the context menu -Properties

      3. Click on the General -tab

      4. Click on the button Printing -Preferences...

      5. A new dialog opens. Keep this dialog open and go back -to the parent dialog.

      -

    3. The third, the "correct" way: (should you do -this from the beginning, just carry out steps 1. and 2. from second -"way" above) - -

      1. Click on the Advanced -tab. (Hmmm... if everything is "Grayed Out", then you are not logged -in as a user with enough privileges).

      2. Click on the Printing -Defaults... button.

      3. On any of the two new tabs, click on the -Advanced... button.

      4. A new dialog opens. Compare this one to the other, -identical looking one from "B.5" or A.3".

      -

    - -Do you see any difference in the two settings dialogs? I don't -either. However, only the last one, which you arrived at with steps -C.1.-6. will permanently save any settings which will then become the -defaults for new users. If you want all clients to have the same -defaults, you need to conduct these steps as administrator -(printer admin in ) -before a client downloads the driver (the clients -can later set their own per-user defaults by -following the procedures A. -or B. above...). (This is new: Windows 2000 and -Windows XP allow per-user default settings and -the ones the administrator gives them, before they set up their own). -The "parents" of the identically looking dialogs have a slight -difference in their window names: one is called -Default Print Values for Printer Foo on Server -Bar" (which is the one you need) and the other is -called "Print Settings for Printer Foo on Server -Bar". The last one is the one you arrive at when you -right-click on the printer and select Print -Settings.... This is the one what you were -taught to use back in the days of Windows NT! So it is only natural to -try the same way with Win2k or WinXP. You wouldn't dream -that there is now a different "clicking path" to arrive at an -identically looking, but functionally different dialog to set defaults -for all users! -

    Tip

    Try (on Win2000 and WinXP) to run this command (as a user -with the right privileges): +admins. They have struggled for hours and could not arrive at a point +where their settings seemed to be saved. It is not their fault. The confusing +thing is that in the multi-tabbed dialog that pops up when you right-click +on the printer name and select Properties, you +can arrive at two dialogs that appear identical, each claiming that they help +you to set printer options in three different ways. Here is the definite +answer to the Samba default driver setting FAQ: +

    I can not set and save default print options +for all users on Windows 200x/XP. Why not?”  +How are you doing it? I bet the wrong way. (It is not easy to find out, though). There are three different +ways to bring you to a dialog that seems to set everything. All three +dialogs look the same, but only one +of them does what you intend. You need to be Administrator or Print Administrator to do this for all +users. Here is how I reproduce it in an XP Professional: + +The following list needs periods after the letters and numbers::::::::: +

    1. The first “wrong” way: +

      1. Open the Printers folder.

      2. Right-click on the printer (remoteprinter on cupshost) and + select in context menu Printing Preferences...

      3. Look at this dialog closely and remember what it looks like.

    2. The second “wrong” way: +

      1. Open the Printers folder.

      2. Right-click on the printer (remoteprinter on + cupshost) and select in the context menu + Properties

      3. Click on the General + tab

      4. Click on the Printing + Preferences...

      5. A new dialog opens. Keep this dialog open and go back + to the parent dialog.

      +

    3. + The third and correct way: (should you do this from the beginning, just carry out steps 1 + and 2 from the second method above). +

      1. Click on the Advanced + tab. (If everything is “grayed out,” then you are not logged + in as a user with enough privileges).

      2. Click on the Printing + Defaults button.

      3. On any of the two new tabs, + click on the + Advanced button.

      4. A new dialog opens. Compare + this one to the other. Are they + identical looking comparing one from + “B.5” and one from A.3".

    +Do you see any difference in the two settings dialogs? I do not either. However, only the last one, which +you arrived at with steps C.1 through 6 will permanently save any settings which will then become the defaults +for new users. If you want all clients to have the same defaults, you need to conduct these steps as +administrator (printer admin in ) before +a client downloads the driver (the clients can later set their own per-user defaults +by following procedures A or B above). Windows 200x/XP allow per-user default settings and the ones the +administrator gives them, before they set up their own. The parents of the identically-looking dialogs have a slight difference in their window names; one is called Default Print +Values for Printer Foo on Server Bar" (which is the one you need) and the other is called +“Print Settings for Printer Foo on Server Bar”. The last one is the one you +arrive at when you right-click on the printer and select Print Settings.... This +is the one that you were taught to use back in the days of Windows NT, so it is only natural to try the +same way with Windows 200x/XP. You would not dream that there is now a different path to arrive at an +identically looking, but functionally different, dialog to set defaults for all users. +

    Tip

    Try (on Windows 200x/XP) to run this command (as a user with the right privileges):

    rundll32 printui.dll,PrintUIEntry /p /t3 /n\\SAMBA-SERVER\printersharename

    -to see the tab with the Printing Defaults... -button (the one you need). Also run this command: +To see the tab with the Printing Defaults button (the one you need),also run this command:

    rundll32 printui.dll,PrintUIEntry /p /t0 /n\\SAMBA-SERVER\printersharename

    -to see the tab with the Printing Preferences... -button (the one which doesn't set system-wide defaults). You can -start the commands from inside a DOS box" or from the Start --- Run... menu. -

    Supporting large Numbers of Printers

    -One issue that has arisen during the recent development phase of Samba -is the need to support driver downloads for 100's of printers. Using -Windows NT APW here is somewhat awkward (to say the least). If you -don't want to acquire RSS pains from such the printer installation -clicking orgy alone, you need to think about a non-interactive script. -

    -If more than one printer is using the same driver, the -rpcclient setdriver command can be used to set the -driver associated with an installed queue. If the driver is uploaded -to [print$] once and registered with the -printing TDBs, it can be used by multiple print queues. In this case -you just need to repeat the setprinter subcommand -of rpcclient for every queue (without the need to -conduct the adddriver again and again). The -following is an example of how this could be accomplished: +To see the tab with the Printing Preferences +button (the one which does not set system-wide defaults), you can +start the commands from inside a DOS box" or from Start -> Run. +

    Supporting Large Numbers of Printers

    +One issue that has arisen during the recent development phase of Samba is the need to support driver +downloads for hunderds of printers. Using Windows NT APW here is somewhat awkward (to say the least). If +you do not want to acquire RSS pains from the printer installation clicking orgy alone, you need +to think about a non-interactive script. +

    +If more than one printer is using the same driver, the rpcclient setdriver +command can be used to set the driver associated with an installed queue. If the driver is uploaded to +[print$] once and registered with the printing TDBs, it can be used by +multiple print queues. In this case, you just need to repeat the setprinter subcommand of +rpcclient for every queue (without the need to conduct the adddriver +repeatedly). The following is an example of how this could be accomplished:

     root# rpcclient SAMBA-CUPS -U root%secret -c 'enumdrivers'
      cmd = enumdrivers
    @@ -7410,7 +7514,7 @@ following is an example of how this could be accomplished:
        Driver Name: [dm9110]
     
      Printer Driver Info 1:
    -   Driver Name: [myphantasydrivername]
    +   Driver Name: [mydrivername]
     
      [....]
     

    @@ -7444,9 +7548,9 @@ following is an example of how this could be accomplished:

    -root# rpcclient SAMBA-CUPS -U root%secret -c 'setdriver dm9110 myphantasydrivername'
    - cmd = setdriver dm9110 myphantasydrivername
    - Successfully set dm9110 to myphantasydrivername.
    +root# rpcclient SAMBA-CUPS -U root%secret -c 'setdriver dm9110 mydrivername'
    + cmd = setdriver dm9110 mydrivername
    + Successfully set dm9110 to mydrivername.
     

    @@ -7454,119 +7558,94 @@ following is an example of how this could be accomplished:
      cmd = enumprinters
        flags:[0x800000]
        name:[\\SAMBA-CUPS\dm9110]
    -   description:[\\SAMBA-CUPS\dm9110,myphantasydrivername,\
    +   description:[\\SAMBA-CUPS\dm9110,mydrivername,\
          110ppm HiVolume DANKA Stuttgart]
        comment:[110ppm HiVolume DANKA Stuttgart]
      [....]
     

    -It may be not easy to recognize: but the first call to -enumprinters showed the "dm9110" printer with an -empty string where the driver should have been listed (between the 2 -commas in the "description" field). After the -setdriver command succeeded, all is well. (The -CUPS Printing chapter has more info about the installation of printer -drivers with the help of rpcclient). -

    Adding new Printers with the Windows NT APW

    -By default, Samba exhibits all printer shares defined in -smb.conf in the -Printers... folder. Also located in this folder -is the Windows NT Add Printer Wizard icon. The APW will be shown only -if: -

    • ...the connected user is able to successfully execute -an OpenPrinterEx(\\server) with administrative -privileges (i.e. root or printer admin). -

      Tip

      Try this from a Windows 2K/XP DOS box command prompt: -

      -runas /netonly /user:root rundll32 printui.dll,PrintUIEntry /p /t0 /n \\SAMBA-SERVER\printersharename -

      -and click on Printing Preferences... -

    • ... contains the setting -show add printer wizard = yes (the -default).

    +It may not be easy to recognize that the first call to enumprinters showed the +“dm9110” printer with an empty string where the driver should have been listed (between +the 2 commas in the description field). After the setdriver command +succeeded, all is well. +

    Adding New Printers with the Windows NT APW

    +By default, Samba exhibits all printer shares defined in smb.conf in the Printers +folder. Also located in this folder is the Windows NT Add Printer Wizard icon. The APW will be shown only if: +

    • + The connected user is able to successfully execute an OpenPrinterEx(\\server) with + administrative privileges (i.e., root or printer admin). +

      Tip

      Try this from a Windows 200x/XP DOS box command prompt: +

      + runas /netonly /user:root rundll32 printui.dll,PrintUIEntry /p /t0 /n \\SAMBA-SERVER\printersharename +

      + Click on Printing Preferences. +

    • ... contains the setting + show add printer wizard = yes (the + default).

    The APW can do various things: -

    • upload a new driver to the Samba -[print$] share;

    • associate an uploaded driver with an existing (but -still "driverless") print queue;

    • exchange the currently used driver for an existing -print queue with one that has been uploaded before;

    • add an entirely new printer to the Samba host (only in -conjunction with a working add printer command; -a corresponding delete printer command for -removing entries from the Printers... folder -may be provided too)

    -The last one (add a new printer) requires more effort than the -previous ones. In order to use the APW to successfully add a printer -to a Samba server, the add printer command must -have a defined value. The program hook must successfully add the -printer to the UNIX print system (i.e. to -/etc/printcap, -/etc/cups/printers.conf or other appropriate -files) and to if necessary. -

    -When using the APW from a client, if the named printer share does not -exist, smbd will execute the add printer -command and reparse to the -to attempt to locate the new printer share. If the share is still not -defined, an error of Access Denied is -returned to the client. Note that the add printer command is executed under the context of the connected -user, not necessarily a root account. A map to guest = bad user may have connected you unwittingly under the wrong -privilege; you should check it by using the -smbstatus command. -

    Weird Error Message Cannot connect under a -different Name

    -Once you are connected with the wrong credentials, there is no means -to reverse the situation other than to close all Explorer windows, and -perhaps reboot. -

    • The net use \\SAMBA-SERVER\sharename -/user:root gives you an error message: Multiple -connections to a server or a shared resource by the same user -utilizing the several user names are not allowed. Disconnect all -previous connections to the server, resp. the shared resource, and try -again.

    • Every attempt to "connect a network drive" to -\\SAMBASERVER\\print$ to z: is countered by the -pertinacious message. This network folder is currently -connected under different credentials (username and password). -Disconnect first any existing connection to this network share in -order to connect again under a different username and -password.

    -So you close all connections. You try again. You get the same -message. You check from the Samba side, using -smbstatus. Yes, there are some more -connections. You kill them all. The client still gives you the same -error message. You watch the smbd.log file on a very high debug level -and try re-connect. Same error message, but not a single line in the -log. You start to wonder if there was a connection attempt at all. You -run ethereal and tcpdump while you try to connect. Result: not a -single byte goes on the wire. Windows still gives the error -message. You close all Explorer Windows and start it again. You try to -connect - and this times it works! Windows seems to cache connection -info somewhere and doesn't keep it up to date (if you are unlucky you -might need to reboot to get rid of the error message). -

    Be careful when assembling Driver Files

    -You need to be very careful when you take notes about the files and -belonging to a particular driver. Don't confuse the files for driver -version "0" (for Win95/98/ME, going into -[print$]/WIN/0/), driver version "2" (Kernel Mode -driver for WinNT, going into [print$]/W32X86/2/ -may be used on Win2K/XP too), and driver version -"3" (non-Kernel Mode driver going into -[print$]/W32X86/3/ can not -be used on WinNT). Very often these different driver versions contain -files carrying the same name; but still the files are very different! -Also, if you look at them from the Windows Explorer (they reside in -%WINDOWS%\system32\spool\drivers\W32X86\) you -will probably see names in capital letters, while an "enumdrivers" -command from Samba would show mixed or lower case letters. So it is -easy to confuse them. If you install them manually using -rpcclient and subcommands, you may even succeed -without an error message. Only later, when you try install on a -client, you will encounter error messages like This -server has no appropriate driver for the printer. -

    -Here is an example. You are invited to look very closely at the -various files, compare their names and their spelling, and discover -the differences in the composition of the version-2 and -3 sets -Note: the version-0 set contained 40 (!) -Dependentfiles, so I left it out for space -reasons: +

    • + Upload a new driver to the Samba [print$] share. +

    • + Associate an uploaded driver with an existing (but still driverless) print queue. +

    • + Exchange the currently used driver for an existing print queue with one that has been uploaded before. +

    • + Add an entirely new printer to the Samba host (only in conjunction with a working + add printer command. A corresponding + delete printer command for removing entries from the + Printers folder may also be provided). +

    +The last one (add a new printer) requires more effort than the previous ones. To use +the APW to successfully add a printer to a Samba server, the add printer command must have a defined value. The program hook must successfully +add the printer to the UNIX print system (i.e., to /etc/printcap, +/etc/cups/printers.conf or other appropriate files) and to smb.conf if necessary. +

    +When using the APW from a client, if the named printer share does not exist, smbd will execute the +add printer command and reparse to the to attempt to locate the new printer +share. If the share is still not defined, an error of Access Denied is returned to +the client. The add printer command is executed +under the context of the connected user, not necessarily a root account. A map to guest = bad user may have connected you unwittingly under the wrong +privilege. You should check it by using the smbstatus command. +

    Error Message: “Cannot connect under a different Name

    +Once you are connected with the wrong credentials, there is no means to reverse the situation other than +to close all Explorer Windows, and perhaps reboot. +

    • + The net use \\SAMBA-SERVER\sharename /user:root gives you an error message: + “Multiple connections to a server or a shared resource by the same user utilizing + the several user names are not allowed. Disconnect all previous connections to the server, + resp. the shared resource, and try again.” +

    • + Every attempt to “connect a network drive” to \\SAMBASERVER\\print$ + to z: is countered by the pertinacious message: “This + network folder is currently connected under different credentials (username and password). + Disconnect first any existing connection to this network share in order to connect again under + a different username and password”. +

    +So you close all connections. You try again. You get the same message. You check from the Samba side, +using smbstatus. Yes, there are more connections. You kill them all. The client +still gives you the same error message. You watch the smbd.log file on a high debug level and try +reconnect. Same error message, but not a single line in the log. You start to wonder if there was a +connection attempt at all. You run ethereal and tcpdump while you try to connect. Result: not a single +byte goes on the wire. Windows still gives the error message. You close all Explorer windows and start it +again. You try to connect and this times it works! Windows seems to cache connection informtion somewhere and +does not keep it up-to-date (if you are unlucky you might need to reboot to get rid of the error message). +

    Take Care When Assembling Driver Files

    +You need to be extremely careful when you take notes about the files and belonging to a particular +driver. Don't confuse the files for driver version “0” (for Windows 9x/Me, going into +[print$]/WIN/0/), driver version 2 (Kernel Mode driver for Windows NT, +going into [print$]/W32X86/2/ may be used on Windows 200x/XP also), and +driver version “3” (non-Kernel Mode driver going into [print$]/W32X86/3/ +cannot be used on Windows NT). Quite often these different driver versions contain +files that have the same name but actually are very different. If you look at them from +the Windows Explorer (they reside in %WINDOWS%\system32\spool\drivers\W32X86\), +you will probably see names in capital letters, while an enumdrivers command from Samba +would show mixed or lower case letters. So it is easy to confuse them. If you install them manually using +rpcclient and subcommands, you may even succeed without an error message. Only later, +when you try install on a client, you will encounter error messages like This server +has no appropriate driver for the printer. +

    +Here is an example. You are invited to look closely at the various files, compare their names and +their spelling, and discover the differences in the composition of the version 2 and 3 sets. Note: the +version 0 set contained 40 Dependentfiles, so I left it out for space reasons:

     root# rpcclient -U 'Administrator%secret' -c 'enumdrivers 3' 10.160.50.8 
     
    @@ -7626,7 +7705,7 @@ reasons:
              Defaultdatatype: []
     
     

    -If we write the "version 2" files and the "version 3" files +If we write the “version 2” files and the “version 3” files into different text files and compare the result, we see this picture:

    @@ -7658,7 +7737,8 @@ picture:
                                  > cns3ggr.dll
     
     

    -Don't be fooled though! Driver files for each version with identical + +Do not be fooled! Driver files for each version with identical names may be different in their content, as you can see from this size comparison:

    @@ -7675,341 +7755,279 @@ comparison:
     
       CNS3G.DLL               A  1145088  Thu May 30 02:31:00 2002
       CNS3G.DLL               A    15872  Thu May 30 02:31:00 2002
    -
     

    -In my example were even more differences than shown here. Conclusion: -you must be very careful to select the correct driver files for each -driver version. Don't rely on the names alone. Don't interchange files +In my example were even more differences than shown here. Conclusion: you must be careful to select +the correct driver files for each driver version. Don't rely on the +names alone and don't interchange files belonging to different driver versions. -

    Samba and Printer Ports

    -Windows NT/2000 print servers associate a port with each -printer. These normally take the form of LPT1:, -COM1:, FILE:, etc. Samba -must also support the concept of ports associated with a printer. By -default, only one printer port, named "Samba Printer Port", exists on -a system. Samba does not really need such a "port" in order to print; -it rather is a requirement of Windows clients. They insist on being -told about an available port when they request this info, otherwise -they throw an error message at you. So Samba fakes the port +

    Samba and Printer Ports

    +Windows NT/2000 print servers associate a port with each printer. These normally take the form of +LPT1:, COM1:, +FILE:, and so on. Samba must also +support the concept of ports associated with a printer. By default, only one printer port, named “Samba +Printer Port”, exists on a system. Samba does not really need such a “port” in order +to print; rather it is a requirement of Windows clients. They insist on being told about an available +port when they request this information, otherwise they throw an error message at you. So Samba fakes the port information to keep the Windows clients happy.

    -Note that Samba does not support the concept of "Printer Pooling" -internally either. Printer Pooling assigns a logical printer to -multiple ports as a form of load balancing or fail over. -

    -If you require that multiple ports be defined for some reason or -another (“My users and my Boss should not know that they are -working with Samba”), possesses a -enumports command which can be used to define -an external program that generates a listing of ports on a system. -

    Avoiding the most common Misconfigurations of the Client Driver

    -So - printing works, but there are still problems. Most jobs print -well, some don't print at all. Some jobs have problems with fonts, -which don't look good at all. Some jobs print fast, and some are -dead-slow. We can't cover it all; but we want to encourage you to read -the little paragraph about "Avoiding the wrong PostScript Driver -Settings" in the CUPS Printing part of this document. -

    The Imprints Toolset

    -The Imprints tool set provides a UNIX equivalent of the -Windows NT Add Printer Wizard. For complete information, please -refer to the Imprints web site -at http://imprints.sourceforge.net/ -as well as the documentation included with the imprints source -distribution. This section will only provide a brief introduction -to the features of Imprints. -

    Attention! Maintainer required.  -Unfortunately, the Imprints toolset is no longer maintained. As of -December, 2000, the project is in need of a new maintainer. The most -important skill to have is decent perl coding and an interest in -MS-RPC based printing using Samba. If you wish to volunteer, please -coordinate your efforts on the samba-technical mailing list. The -toolset is still in usable form; but only for a series of older -printer models, where there are prepared packages to use. Packages for -more up to date print devices are needed if Imprints should have a -future.

    What is Imprints?

    +Samba does not support the concept of Printer Pooling internally either. Printer +Pooling assigns a logical printer to multiple ports as a form of load balancing or fail over. +

    +If you require multiple ports be defined for some reason or another (my users and my boss should not know +that they are working with Samba), configure enumports command +which can be used to define an external program that generates a listing of ports on a system. +

    Avoiding Common Client Driver Misconfiguration

    +So now the printing works, but there are still problems. Most jobs print well, some do not print at +all. Some jobs have problems with fonts, which do not look good. Some jobs print fast and some +are dead-slow. We cannot cover it all, but we want to encourage you to read the brief paragraph about +“Avoiding the Wrong PostScript Driver Settings” in the CUPS Printing part of this document. +

    The Imprints Toolset

    +The Imprints tool set provides a UNIX equivalent of the Windows NT Add Printer +Wizard. For complete information, please refer to the Imprints Web site at http://imprints.sourceforge.net/ as well as the documentation +included with the imprints source distribution. This section only provides a brief introduction to +the features of Imprints. +

    +Unfortunately, the Imprints toolset is no longer maintained. As of December 2000, the project is in +need of a new maintainer. The most important skill to have is Perl coding and an interest in MS-RPC-based +printing used in Samba. If you wish to volunteer, please coordinate +your efforts on the Samba technical +mailing list. The toolset is still in usable form, but only for a series of older printer models where +there are prepared packages to use. Packages for more up-to-date print devices are needed if Imprints +should have a future. +

    What is Imprints?

    Imprints is a collection of tools for supporting these goals: -

    • Providing a central repository information regarding -Windows NT and 95/98 printer driver packages

    • Providing the tools necessary for creating the -Imprints printer driver packages.

    • Providing an installation client which will obtain -printer drivers from a central internet (or intranet) Imprints Server -repository and install them on remote Samba and Windows NT4 print -servers.

    Creating Printer Driver Packages

    -The process of creating printer driver packages is beyond the scope of -this document (refer to Imprints.txt also included with the Samba -distribution for more information). In short, an Imprints driver -package is a gzipped tarball containing the driver files, related INF -files, and a control file needed by the installation client. -

    The Imprints Server

    -The Imprints server is really a database server that may be queried -via standard HTTP mechanisms. Each printer entry in the database has -an associated URL for the actual downloading of the package. Each +

    • + Providing a central repository of information regarding Windows NT and 95/98 printer driver packages. +

    • + Providing the tools necessary for creating the Imprints printer driver packages. +

    • + Providing an installation client that will obtain printer drivers from a central Internet (or intranet) Imprints Server + repository and install them on remote Samba and Windows NT4 print servers. +

    Creating Printer Driver Packages

    +The process of creating printer driver packages is beyond the scope of this document (refer to Imprints.txt +also included with the Samba distribution for more information). In short, an Imprints driver package +is a gzipped tarball containing the driver files, related INF files, and a control file needed by the +installation client. +

    The Imprints Server

    +The Imprints server is really a database server that may be queried via standard HTTP mechanisms. Each +printer entry in the database has an associated URL for the actual downloading of the package. Each package is digitally signed via GnuPG which can be used to verify that -package downloaded is actually the one referred in the Imprints -database. It is strongly recommended that this security check -not be disabled. -

    The Installation Client

    -More information regarding the Imprints installation client is -available in the Imprints-Client-HOWTO.ps file -included with the imprints source package. -

    -The Imprints installation client comes in two forms. -

    • a set of command line Perl scripts

    • a GTK+ based graphical interface to the command line Perl -scripts

    -The installation client (in both forms) provides a means of querying -the Imprints database server for a matching list of known printer -model names as well as a means to download and install the drivers on +the package downloaded is actually +the one referred in the Imprints database. It is strongly recommended that this security check +not be disabled. +

    The Installation Client

    +More information regarding the Imprints installation client is available from the the documentation file +Imprints-Client-HOWTO.ps that is included with the Imprints source package. The Imprints +installation client comes in two forms: +

    • A set of command line Perl scripts.

    • A GTK+ based graphical interface to the command line Perl scripts.

    +The installation client (in both forms) provides a means of querying the Imprints database server for +a matching list of known printer model names as well as a means to download and install the drivers on remote Samba and Windows NT print servers.

    -The basic installation process is in four steps and perl code is -wrapped around smbclient and rpcclient +The basic installation process is in four steps and Perl code is wrapped around smbclient and rpcclient.

    • - foreach (supported architecture for a given driver) -

      1. rpcclient: Get the appropriate upload directory on the remote server

      2. smbclient: Upload the driver files

      3. rpcclient: Issues an AddPrinterDriver() MS-RPC

      -

    • rpcclient: Issue an AddPrinterEx() MS-RPC to actually create the printer

    -One of the problems encountered when implementing the Imprints tool -set was the name space issues between various supported client -architectures. For example, Windows NT includes a driver named "Apple -LaserWriter II NTX v51.8" and Windows 95 calls its version of this -driver "Apple LaserWriter II NTX" -

    -The problem is how to know what client drivers have been uploaded for -a printer. An astute reader will remember that the Windows NT Printer -Properties dialog only includes space for one printer driver name. A -quick look in the Windows NT 4.0 system registry at + For each supported architecture for a given driver: +

    1. rpcclient: Get the appropriate upload directory on the remote server.

    2. smbclient: Upload the driver files.

    3. rpcclient: Issues an AddPrinterDriver() MS-RPC.

    +

  • rpcclient: Issue an AddPrinterEx() MS-RPC to actually create the printer.

  • +One of the problems encountered when implementing the Imprints tool set was the name space issues between +various supported client architectures. For example, Windows NT includes a driver named “Apple LaserWriter +II NTX v51.8” and Windows 95 calls its version of this driver “Apple LaserWriter II NTX”. +

    +The problem is how to know what client drivers have been uploaded for a printer. An astute reader will +remember that the Windows NT Printer Properties dialog only includes space for one printer driver name. A +quick look in the Windows NT 4.0 system registry at:

    HKLM\System\CurrentControlSet\Control\Print\Environment

    -will reveal that Windows NT always uses the NT driver name. This is -ok as Windows NT always requires that at least the Windows NT version -of the printer driver is present. However, Samba does not have the -requirement internally. Therefore, how can you use the NT driver name -if is has not already been installed? -

    -The way of sidestepping this limitation is to require that all -Imprints printer driver packages include both the Intel Windows NT and -95/98 printer drivers and that NT driver is installed first. -

    Add Network Printers at Logon without User Interaction

    -The following MS Knowledge Base article may be of some help if you -need to handle Windows 2000 clients: How to Add Printers -with No User Interaction in Windows 2000. ( http://support.microsoft.com/default.aspx?scid=kb;en-us;189105 -). It also applies to Windows XP Professional clients. -

    -The ideas sketched out below are inspired by this article. It -describes a commandline method which can be applied to install -network and local printers and their drivers. This is most useful -if integrated in Logon Scripts. You can see what options are -available by typing in a command prompt ("DOS box") this: +will reveal that Windows NT always uses the NT driver name. This is okay as Windows NT always requires +that at least the Windows NT version of the printer driver is present. Samba does not have the +requirement internally, therefore, “How can you use the NT driver name if it has not already been installed?” +

    +The way of sidestepping this limitation is to require that all Imprints printer driver packages include both the Intel Windows NT and +95/98 printer drivers and that the NT driver is installed first. +

    Adding Network Printers without User Interaction

    +The following MS Knowledge Base article may be of some help if you need to handle Windows 2000 +clients: How to Add Printers with No User Interaction in Windows 2000, (http://support.microsoft.com/default.aspx?scid=kb;en-us;189105). +It also applies to Windows XP Professional clients. +The ideas sketched out in this section are inspired by this article, which describes a commandline method that can be +applied to install network and local printers and their drivers. This is most useful if integrated in Logon +Scripts. You can see what options are available by typing in the command prompt (DOS box):

    rundll32 printui.dll,PrintUIEntry /?

    -A window pops up which shows you all of the commandline switches -available. An extensive list of examples is also provided. This is -only for Win 2k/XP. It doesn't work on WinNT. WinNT has probably some -other tools in the respective Resource Kit. Here is a suggestion about -what a client logon script might contain, with a short explanation of -what the lines actually do (it works if 2k/XP Windows clients access -printers via Samba, but works for Windows-based print servers too): +A window pops up that shows you all of the commandline switches available. An extensive list of examples +is also provided. This is only for Win 200x/XP, it does not work on +Windows NT. Windows NT probably has +some other tools in the respective Resource Kit. Here is a suggestion about what a client logon script +might contain, with a short explanation of what the lines actually do (it works if 200x/XP Windows +clients access printers via Samba, and works for Windows-based print servers too):

    -rundll32 printui.dll,PrintUIEntry /dn /n "\\sambacupsserver\infotec2105-IPDS" /q
    -rundll32 printui.dll,PrintUIEntry /in /n "\\sambacupsserver\infotec2105-PS"
    -rundll32 printui.dll,PrintUIEntry /y /n "\\sambacupsserver\infotec2105-PS"
    +rundll32 printui.dll,PrintUIEntry /dn /n "\\cupsserver\infotec2105-IPDS" /q
    +rundll32 printui.dll,PrintUIEntry /in /n "\\cupsserver\infotec2105-PS"
    +rundll32 printui.dll,PrintUIEntry /y /n "\\cupsserver\infotec2105-PS"
     

    Here is a list of the used commandline parameters: -

    /dn

    deletes a network printer

    /q

    quiet modus

    /n

    names a printer

    /in

    adds a network printer connection

    /y

    sets printer as default printer

    • Line 1 deletes a possibly existing previous network -printer infotec2105-IPDS (which had used native -Windows drivers with LPRng that were removed from the server which was -converted to CUPS). The /q at the end eliminates -"Confirm" or error dialog boxes popping up. They should not be -presented to the user logging on.

    • Line 2 adds the new printer -infotec2105-PS (which actually is same physical -device but is now run by the new CUPS printing system and associated -with the CUPS/Adobe PS drivers). The printer and its driver -must have been added to Samba prior to the user -logging in (e.g. by a procedure as discussed earlier in this chapter, -or by running cupsaddsmb). The driver is now -auto-downloaded to the client PC where the user is about to log -in.

    • Line 3 sets the default printer to this new network -printer (there might be several other printers installed with this -same method and some may be local as well -- so we decide for a -default printer). The default printer selection may of course be -different for different users.

    -Note that the second line only works if the printer -infotec2105-PS has an already working print queue -on "sambacupsserver", and if the printer drivers have successfully been -uploaded (via APW , -smbclient/rpcclient or -cupsaddsmb) into the -[print$] driver repository of Samba. Also, some -Samba versions prior to version 3.0 required a re-start of smbd after -the printer install and the driver upload, otherwise the script (or -any other client driver download) would fail. -

    -Since there no easy way to test for the existence of an installed -network printer from the logon script, the suggestion is: don't bother -checking and just allow the deinstallation/reinstallation to occur -every time a user logs in; it's really quick anyway (1 to 2 seconds). +

    /dn

    deletes a network printer

    /q

    quiet modus

    /n

    names a printer

    /in

    adds a network printer connection

    /y

    sets printer as default printer

    • + Line 1 deletes a possibly existing previous network printer infotec2105-IPDS + (which had used native Windows drivers with LPRng that were removed from the server that was + converted to CUPS). The /q at the end eliminates Confirm + or error dialog boxes from popping up. They should not be presented to the user logging on. +

    • + Line 2 adds the new printer + infotec2105-PS (which actually is the same + physical device but is now run by the new CUPS printing system and associated with the + CUPS/Adobe PS drivers). The printer and its driver must have been added to Samba prior to + the user logging in (e.g., by a procedure as discussed earlier in this chapter, or by running + cupsaddsmb). The driver is now auto-downloaded to the client PC where the + user is about to log in. +

    • + Line 3 sets the default printer to this new network printer (there might be several other + printers installed with this same method and some may be local as well, so we decide for a + default printer). The default printer selection may, of course, be different for different users. +

    +The second line only works if the printer infotec2105-PS has an already working +print queue on the cupsserver, and if the +printer drivers have been successfully uploaded +(via the APW, smbclient/rpcclient, or cupsaddsmb) +into the [print$] driver repository of Samba. Some Samba versions +prior to version 3.0 required a re-start of smbd after the printer install and the driver upload, +otherwise the script (or any other client driver download) would fail. +

    +Since there no easy way to test for the existence of an installed network printer from the logon script, +do not bother checking, just allow the deinstallation/reinstallation to occur every time a user logs in; +it's really quick anyway (1 to 2 seconds).

    The additional benefits for this are: -

    • It puts in place any printer default setup changes -automatically at every user logon.

    • It allows for "roaming" users' login into the domain from -different workstations.

    -Since network printers are installed per user this much simplifies the -process of keeping the installation up-to-date. The extra few seconds -at logon time will not really be noticeable. Printers can be centrally -added, changed, and deleted at will on the server with no user -intervention required on the clients (you just need to keep the logon -scripts up to date). -

    The addprinter command

    -The addprinter command can be configured to be a -shell script or program executed by Samba. It is triggered by running -the APW from a client against the Samba print server. The APW asks the -user to fill in several fields (such as printer name, driver to be -used, comment, port monitor, etc.). These parameters are passed on to -Samba by the APW. If the addprinter command is designed in a way that -it can create a new printer (through writing correct printcap entries -on legacy systems, or execute the lpadmin command -on more modern systems) and create the associated share in -, then the APW will in effect really -create a new printer on Samba and the UNIX print subsystem! -

    Migration of "Classical" printing to Samba

    -The basic "NT-style" printer driver management has not changed -considerably in 3.0 over the 2.2.x releases (apart from many small -improvements). Here migration should be quite easy, especially if you -followed previous advice to stop using deprecated parameters in your -setup. For migrations from an existing 2.0.x setup, or if you -continued "Win9x-style" printing in your Samba 2.2 installations, it -is more of an effort. Please read the appropriate release notes and -the HOWTO Collection for 2.2. You can follow several paths. Here are -possible scenarios for migration: -

    • You need to study and apply the new Windows NT printer -and driver support. Previously used parameters printer -driver file, printer driver and -printer driver location are no longer -supported.

    • If you want to take advantage of WinNT printer driver -support you also need to migrate the Win9x/ME drivers to the new -setup.

    • An existing printers.def file - (the one specified in the now removed parameter printer driver file) will work no longer with samba 3. In -3.0, smbd attempts to locate a Win9x/ME driver files for the printer -in [print$] and additional settings in the TDB -and only there; if it fails it will not (as 2.2.x -used to do) drop down to using a printers.def -(and all associated parameters). The make_printerdef tool is removed -and there is no backwards compatibility for this.

    • You need to install a Windows 9x driver into the -[print$] share for a printer on your Samba -host. The driver files will be stored in the "WIN40/0" subdirectory of -[print$], and some other settings and info go -into the printing-related TDBs.

    • If you want to migrate an existing -printers.def file into the new setup, the current -only solution is to use the Windows NT APW to install the NT drivers -and the 9x drivers. This can be scripted using smbclient and -rpcclient. See the Imprints installation client at: -

      - http://imprints.sourceforge.net/ -

      -for an example. See also the discussion of rpcclient usage in the -"CUPS Printing" section.

    Publishing Printer Information in Active Directory or LDAP

    -We will publish an update to this section shortly. -

    Common Errors

    I give my root password but I don't get access

    -Don't confuse the root password which is valid for the UNIX system -(and in most cases stored in the form of a one-way hash in a file -named /etc/shadow) with the password used to -authenticate against Samba!. Samba doesn't know the UNIX password; for -root to access Samba resources via Samba-type access, a Samba account -for root must be created first. This is often done with the -smbpasswd command. -

    My printjobs get spooled into the spooling directory, but then get lost

    -Don't use the existing UNIX print system spool directory for the Samba -spool directory. It may seem convenient and a saving of space, but it -only leads to problems. The two must be separate. -

    Chapter 19. CUPS Printing Support in Samba 3.0

    Kurt Pfeifle

    Danka Deutschland GmbH

    Ciprian Vizitiu

    drawings

    Jelmer R. Vernooij

    drawings
    The Samba Team

    (3 June 2003)

    Table of Contents

    Introduction
    Features and Benefits
    Overview
    Basic Configuration of CUPS support
    Linking of smbd with libcups.so
    Simple smb.conf Settings for CUPS
    More complex smb.conf Settings for -CUPS
    Advanced Configuration
    Central spooling vs. "Peer-to-Peer" printing
    CUPS/Samba as a "spooling-only" Print Server; "raw" printing -with Vendor Drivers on Windows Clients
    Driver Installation Methods on Windows Clients
    Explicitly enable "raw" printing for -application/octet-stream!
    Three familiar Methods for driver upload plus a new one
    Using CUPS/Samba in an advanced Way -- intelligent printing -with PostScript Driver Download
    GDI on Windows -- PostScript on UNIX
    Windows Drivers, GDI and EMF
    UNIX Printfile Conversion and GUI Basics
    PostScript and Ghostscript
    Ghostscript -- the Software RIP for non-PostScript Printers
    PostScript Printer Description (PPD) Specification
    CUPS can use all Windows-formatted Vendor PPDs
    CUPS also uses PPDs for non-PostScript Printers
    The CUPS Filtering Architecture
    MIME types and CUPS Filters
    MIME type Conversion Rules
    Filter Requirements
    Prefilters
    pstops
    pstoraster
    imagetops and imagetoraster
    rasterto [printers specific]
    CUPS Backends
    cupsomatic/Foomatic -- how do they fit into the Picture?
    The Complete Picture
    mime.convs
    "Raw" printing
    "application/octet-stream" printing
    PostScript Printer Descriptions (PPDs) for non-PS Printers
    Difference between cupsomatic/foomatic-rip and -native CUPS printing
    Examples for filtering Chains
    Sources of CUPS drivers / PPDs
    Printing with Interface Scripts
    Network printing (purely Windows)
    From Windows Clients to an NT Print Server
    Driver Execution on the Client
    Driver Execution on the Server
    Network Printing (Windows clients -- UNIX/Samba Print -Servers)
    From Windows Clients to a CUPS/Samba Print Server
    Samba receiving Jobfiles and passing them to CUPS
    Network PostScript RIP: CUPS Filters on Server -- clients use -PostScript Driver with CUPS-PPDs
    PPDs for non-PS Printers on UNIX
    PPDs for non-PS Printers on Windows
    Windows Terminal Servers (WTS) as CUPS Clients
    Printer Drivers running in "Kernel Mode" cause many -Problems
    Workarounds impose Heavy Limitations
    CUPS: a "Magical Stone"?
    PostScript Drivers with no major problems -- even in Kernel -Mode
    Setting up CUPS for driver Download
    cupsaddsmb: the unknown Utility
    Prepare your smb.conf for cupsaddsmb
    CUPS Package of "PostScript Driver for WinNT/2k/XP"
    Recognize the different Driver Files
    Acquiring the Adobe Driver Files
    ESP Print Pro Package of "PostScript Driver for -WinNT/2k/XP"
    Caveats to be considered
    Benefits of using "CUPS PostScript Driver for -Windows NT/2k/XP" instead of Adobe Driver
    Run "cupsaddsmb" (quiet Mode)
    Run "cupsaddsmb" with verbose Output
    Understanding cupsaddsmb
    How to recognize if cupsaddsmb completed successfully
    cupsaddsmb with a Samba PDC
    cupsaddsmb Flowchart
    Installing the PostScript Driver on a Client
    Avoiding critical PostScript Driver Settings on the -Client
    Installing PostScript Driver Files manually (using -rpcclient)
    A Check of the rpcclient man Page
    Understanding the rpcclient man page
    Producing an Example by querying a Windows Box
    What is required for adddriver and setdriver to succeed
    Manual Driver Installation in 15 Steps
    Troubleshooting revisited
    The printing *.tdb Files
    Trivial DataBase Files
    Binary Format
    Losing *.tdb Files
    Using tdbbackup
    CUPS Print Drivers from Linuxprinting.org
    foomatic-rip and Foomatic explained
    foomatic-rip and Foomatic-PPD Download and Installation
    Page Accounting with CUPS
    Setting up Quotas
    Correct and incorrect Accounting
    Adobe and CUPS PostScript Drivers for Windows Clients
    The page_log File Syntax
    Possible Shortcomings
    Future Developments
    Other Accounting Tools
    Additional Material
    Auto-Deletion or Preservation of CUPS Spool Files
    CUPS Configuration Settings explained
    Pre-conditions
    Manual Configuration
    In Case of Trouble.....
    Printing from CUPS to Windows attached -Printers
    More CUPS filtering Chains
    Common Errors
    Win9x client can't install driver
    "cupsaddsmb" keeps asking for root password in - neverending loop
    "cupsaddsmb" gives "No PPD file for printer..." - message while PPD file is present
    Client can't connect to Samba printer
    Can't reconnect to Samba under new account - from Win2K/XP
    Avoid being connected to the Samba server as the - "wrong" user
    Upgrading to CUPS drivers from Adobe drivers on - NT/2K/XP clients gives problems
    Can't use "cupsaddsmb" on Samba server which is - a PDC
    Deleted Win2K printer driver is still shown
    Win2K/XP "Local Security - Policies"
    WinXP clients: "Administrator can not install - printers for all local users"
    "Print Change Notify" functions on - NT-clients
    WinXP-SP1
    Print options for all users can't be set on Win2K/XP
    Most common blunders in driver - settings on Windows clients
    cupsaddsmb does not work - with newly installed printer
    Permissions on -/var/spool/samba/ get reset after each -reboot
    Printer named "lp" -intermittently swallows jobs and spits out completely different -ones
    Location of Adobe PostScript driver files necessary for "cupsaddsmb"
    An Overview of the CUPS Printing Processes

    Introduction

    Features and Benefits

    - The Common UNIX Print System (CUPS) has become very popular. All - major Linux distributions now ship it as their default printing - system. To many it is still a very mystical tool. Mostly, it - "just works" (TM). People tend to regard it as a "black box" - which they don't want to look into, as long as it works. But once - there is a little problem, they are in trouble to find out where to - start debugging it. Refer to the "Classical Printing" chapter also, it - contains a lot of information that is relevant for CUPS. +

    • + It puts in place any printer default setup changes automatically at every user logon. +

    • + It allows for “roaming” users' login into the domain from different workstations. +

    +Since network printers are installed per user, this much simplifies the process of keeping the installation +up-to-date. The few extra seconds at logon time will not really be noticeable. Printers can be centrally +added, changed and deleted at will on the server with no user intervention required from the clients +(you just need to keep the logon scripts up-to-date). +

    The addprinter Command

    +The addprinter command can be configured to be a shell script or program executed by +Samba. It is triggered by running the APW from a client against the Samba print server. The APW asks +the user to fill in several fields (such as printer name, driver to be used, comment, port monitor, +and so on). These parameters are passed on to Samba by the APW. If the addprinter command is designed in a +way that it can create a new printer (through writing correct printcap entries on legacy systems, or +execute the lpadmin command on more modern systems) and create the associated share +in, then the APW will in effect really create a new printer on Samba and the UNIX print subsystem! +

    Migration of Classical Printing to Samba

    +The basic NT-style printer driver management has not changed considerably in 3.0 over the 2.2.x releases +(apart from many small improvements). Here migration should be quite easy, especially if you followed +previous advice to stop using deprecated parameters in your setup. For migrations from an existing 2.0.x +setup, or if you continued Windows 9x/Me-style printing in your Samba 2.2 installations, it is more of +an effort. Please read the appropriate release notes and the HOWTO Collection for Samba-2.2.x. You can +follow several paths. Here are possible scenarios for migration: +

    • + You need to study and apply the new Windows NT printer and driver support. Previously used + parameters printer driver file, printer driver + and printer driver location are no longer supported. +

    • + If you want to take advantage of Windows NT printer driver support, you also need to migrate the + Windows 9x/Me drivers to the new setup. +

    • + An existing printers.def file (the one specified in the now removed parameter + printer driver file) will no longer work with Samba-3. In 3.0, smbd attempts + to locate a Windows 9x/Me driver files for the printer in [print$] + and additional settings in the TDB and only there; if it fails, it will not + (as 2.2.x used to do) drop down to using a printers.def (and all associated + parameters). The make_printerdef tool is removed and there is no backward compatibility for this. +

    • You need to install a Windows 9x/Me driver into the + [print$] share for a printer on your Samba + host. The driver files will be stored in the “WIN40/0” subdirectory of + [print$], and some other settings and information go + into the printing-related TDBs.

    • If you want to migrate an existing + printers.def file into the new setup, the + only current + solution is to use the Windows NT APW to install the NT drivers + and the 9x/Me drivers. This can be scripted using smbclient and + rpcclient. See the Imprints installation client at: +

      + http://imprints.sourceforge.net/ +

      + for an example. See also the discussion of rpcclient usage in the + “CUPS Printing” section.

    Publishing Printer Information in Active Directory or LDAP

    +This will be addressed in a later update of this document. If you wish to volunteer your services to help +document this, please contact John H Terpstra. +

    Common Errors

    I Give My Root Password but I Do Not Get Access

    +Do not confuse the root password which is valid for the UNIX system (and in most cases stored in the +form of a one-way hash in a file named /etc/shadow), with the password used to +authenticate against Samba. Samba does not know the UNIX password. Root access to Samba resources +requires that a Samba account for root must first be created. This is done with the smbpasswd +command as follows: +

    +root#  smbpasswd -a root
    +New SMB password: secret
    +Retype new SMB password: secret
    +

    My Print Jobs Get Spooled into the Spooling Directory, but Then Get Lost

    +Do not use the existing UNIX print system spool directory for the Samba spool directory. It may seem +convenient and a savings of space, but it only leads to problems. The two must be separate. +

    Chapter 19. CUPS Printing Support

    Kurt Pfeifle

    Danka Deutschland GmbH

    Ciprian Vizitiu

    drawings

    Jelmer R. Vernooij

    drawings
    The Samba Team

    (3 June 2003)

    Table of Contents

    Introduction
    Features and Benefits
    Overview
    Basic CUPS Support Configuration
    Linking smbd with libcups.so
    Simple smb.conf Settings for CUPS
    More Complex CUPS smb.conf Settings
    Advanced Configuration
    Central Spooling vs. Peer-to-Peer Printing
    Raw Print Serving Vendor Drivers on Windows Clients
    Installation of Windows Client Drivers
    Explicitly Enable raw Printing for application/octet-stream
    Driver Upload Methods
    Advanced Intelligent Printing with PostScript Driver Download
    GDI on Windows -- PostScript on UNIX
    Windows Drivers, GDI and EMF
    UNIX Printfile Conversion and GUI Basics
    PostScript and Ghostscript
    Ghostscript the Software RIP for Non-PostScript Printers
    PostScript Printer Description (PPD) Specification
    Using Windows-Formatted Vendor PPDs
    CUPS Also Uses PPDs for Non-PostScript Printers
    The CUPS Filtering Architecture
    MIME Types and CUPS Filters
    MIME Type Conversion Rules
    Filtering Overview
    Prefilters
    pstops
    pstoraster
    imagetops and imagetoraster
    rasterto [printers specific]
    CUPS Backends
    The Role of cupsomatic/foomatic
    The Complete Picture
    mime.convs
    Raw Printing
    application/octet-stream Printing
    PostScript Printer Descriptions (PPDs) for Non-PS Printers
    cupsomatic/foomatic-rip Versus native CUPS Printing
    Examples for Filtering Chains
    Sources of CUPS Drivers/PPDs
    Printing with Interface Scripts
    Network Printing (Purely Windows)
    From Windows Clients to an NT Print Server
    Driver Execution on the Client
    Driver Execution on the Server
    Network Printing (Windows Clients UNIX/Samba Print +Servers)
    From Windows Clients to a CUPS/Samba Print Server
    Samba Receiving Jobfiles and Passing Them to CUPS
    Network PostScript RIP
    PPDs for Non-PS Printers on UNIX
    PPDs for Non-PS Printers on Windows
    Windows Terminal Servers (WTS) as CUPS Clients
    Printer Drivers Running in Kernel Mode Cause Many +Problems
    Workarounds Impose Heavy Limitations
    CUPS: A Magical Stone?
    PostScript Drivers with No Major Problems Even in Kernel +Mode
    Configuring CUPS for Driver Download
    cupsaddsmb: The Unknown Utility
    Prepare Your smb.conf for cupsaddsmb
    CUPS PostScript Driver for Windows NT/200x/XP
    Recognizing Different Driver Files
    Acquiring the Adobe Driver Files
    ESP Print Pro PostScript Driver for Windows NT/200x/XP
    Caveats to be Considered
    Windows CUPS PostScript Driver Versus Adobe Driver
    Run cupsaddsmb (Quiet Mode)
    Run cupsaddsmb with Verbose Output
    Understanding cupsaddsmb
    How to Recognize If cupsaddsmb Completed Successfully
    cupsaddsmb with a Samba PDC
    cupsaddsmb Flowchart
    Installing the PostScript Driver on a Client
    Avoiding Critical PostScript Driver Settings on the Client
    Installing PostScript Driver Files Manually Using rpcclient
    A Check of the rpcclient man Page
    Understanding the rpcclient man Page
    Producing an Example by Querying a Windows Box
    Requirements for adddriver and setdriver to Succeed
    Manual Driver Installation in 15 Steps
    Troubleshooting Revisited
    The Printing *.tdb Files
    Trivial Database Files
    Binary Format
    Losing *.tdb Files
    Using tdbbackup
    CUPS Print Drivers from Linuxprinting.org
    foomatic-rip and Foomatic Explained
    foomatic-rip and Foomatic-PPD Download and Installation
    Page Accounting with CUPS
    Setting Up Quotas
    Correct and Incorrect Accounting
    Adobe and CUPS PostScript Drivers for Windows Clients
    The page_log File Syntax
    Possible Shortcomings
    Future Developments
    Additional Material
    Auto-Deletion or Preservation of CUPS Spool Files
    CUPS Configuration Settings Explained
    Pre-Conditions
    Manual Configuration
    Printing from CUPS to Windows Attached Printers
    More CUPS-Filtering Chains
    Common Errors
    Windows 9x/ME Client Can't Install Driver
    cupsaddsmb Keeps Asking for Root Password in Never-ending Loop
    cupsaddsmb Errors
    Client Can't Connect to Samba Printer
    New Account Reconnection from Windows 200x/XP Troubles
    Avoid Being Connected to the Samba Server as the Wrong User
    Upgrading to CUPS Drivers from Adobe Drivers
    Can't Use cupsaddsmb on Samba Server Which Is a PDC
    Deleted Windows 200x Printer Driver Is Still Shown
    Windows 200x/XP "Local Security Policies"
    Administrator Cannot Install Printers for All Local Users
    Print Change Notify Functions on NT-clients
    WinXP-SP1
    Print Options for All Users Can't Be Set on Windows 200x/XP
    Most Common Blunders in Driver Settings on Windows Clients
    cupsaddsmb Does Not Work with Newly Installed Printer
    Permissions on /var/spool/samba/ Get Reset After Each Reboot
    Print Queue Called lp Mis-handles Print Jobs
    Location of Adobe PostScript Driver Files for cupsaddsmb
    Overview of the CUPS Printing Processes

    Introduction

    Features and Benefits

    + The Common UNIX Print System (CUPS) + has become quite popular. All major Linux distributions now ship it as their default printing + system. To many, it is still a mystical tool. Mostly, it just works. + People tend to regard it as a “black box” + that they do not want to look into as long as it works. But once + there is a little problem, they are in trouble to find out where to + start debugging it. Refer to the chapter “Classical Printing” that + contains a lot of information that is relevant for CUPS.

    - CUPS sports quite a few unique and powerful features. While their - basic functions may be grasped quite easily, they are also - new. Because they are different from other, more traditional printing - systems, it is best to try and not apply any prior knowledge about - printing upon this new system. Rather, try to understand CUPS - from the beginning. This documentation will lead you to a - complete understanding of CUPS. Let's start with the most basic - things first. -

    Overview

    - CUPS is more than just a print spooling system. It is a complete - printer management system that complies with the new IPP - (Internet Printing Protocol). IPP is an industry - and IETF (Internet Engineering Task Force) - standard for network printing. Many of its functions can be managed - remotely (or locally) via a web browser (giving you a - platform-independent access to the CUPS print server). Additionally, it - has the traditional command line and several more modern GUI interfaces - (GUI interfaces developed by 3rd parties, like KDE's - overwhelming KDEPrint). + CUPS sports quite a few unique and powerful features. While their + basic functions may be grasped quite easily, they are also + new. Because they are different from other, more traditional printing + systems, it is best not to try and apply any prior knowledge about + printing to this new system. Rather, try to understand CUPS + from the beginning. This documentation will lead you to a + complete understanding of CUPS. Let's start with the most basic + things first. +

    Overview

    + CUPS is more than just a print spooling system. It is a complete + printer management system that complies with the new + Internet Printing Protocol (IPP). IPP is an industry + and Internet Engineering Task Force (IETF) + standard for network printing. Many of its functions can be managed + remotely (or locally) via a Web browser (giving you a + platform-independent access to the CUPS print server). Additionally, it + has the traditional command line and several more modern GUI interfaces + (GUI interfaces developed by third parties, like KDE's + overwhelming KDEPrint).

    - CUPS allows creation of "raw" printers (ie: NO print file - format translation) as well as "smart" printers (i.e. CUPS does - file format conversion as required for the printer). In many ways - this gives CUPS similar capabilities to the MS Windows print - monitoring system. Of course, if you are a CUPS advocate, you would - argue that CUPS is better! In any case, let us now move on to - explore how one may configure CUPS for interfacing with MS Windows - print clients via Samba. -

    Basic Configuration of CUPS support

    - Printing with CUPS in the most basic smb.conf setup in Samba 3.0 (as was true for 2.2.x) only needs two - settings: printing = cups and - printcap = cups. CUPS does not need a printcap file. - However, the cupsd.conf configuration file knows of two related directives that control - how such a file will be automatically created and maintained by CUPS for the convenience of third party - applications (example: Printcap /etc/printcap and PrintcapFormat BSD). - Legacy programs often require the existence of a printcap file containing printer names or they will refuse to - print. Make sure CUPS is set to generate and maintain a printcap file! For details see - man cupsd.conf and other CUPS-related documentation, like the wealth of documents on your CUPS server - itself: http://localhost:631/documentation.html. -

    Linking of smbd with libcups.so

    - Samba has a very special relationship to CUPS. Samba can be compiled with CUPS library support. - Most recent installations have this support enabled. Per default CUPS linking is compiled - into smbd and other Samba binaries. Of course, you can use CUPS even - if Samba is not linked against libcups.so -- but - there are some differences in required or supported configuration - then. + CUPS allows creation of “raw” printers (i.e., no print file + format translation) as well as “smart” printers (i.e., CUPS does + file format conversion as required for the printer). In many ways + this gives CUPS similar capabilities to the MS Windows print + monitoring system. Of course, if you are a CUPS advocate, you would + argue that CUPS is better! In any case, let us now move on to + explore how one may configure CUPS for interfacing with MS Windows + print clients via Samba. +

    Basic CUPS Support Configuration

    + Printing with CUPS in the most basic smb.conf setup in Samba-3.0 (as was true for 2.2.x) only needs two + settings: printing = cups and + printcap = cups. CUPS does not need a printcap file. + However, the cupsd.conf configuration file knows of two related directives that control + how such a file will be automatically created and maintained by CUPS for the convenience of third-party + applications (example: Printcap /etc/printcap and PrintcapFormat BSD). + Legacy programs often require the existence of a printcap file containing printer names or they will refuse to + print. Make sure CUPS is set to generate and maintain a printcap file. For details, see + man cupsd.conf and other CUPS-related documentation, like the wealth of documents on your CUPS server + itself: http://localhost:631/documentation.html. +

    Linking smbd with libcups.so

    + Samba has a special relationship to CUPS. Samba can be compiled with CUPS library support. + Most recent installations have this support enabled. Per default, CUPS linking is compiled + into smbd and other Samba binaries. Of course, you can use CUPS even + if Samba is not linked against libcups.so but + there are some differences in required or supported configuration.

    - When Samba is compiled against libcups, printcap = cups - uses the CUPS API to list printers, submit jobs, query queues, etc. Otherwise it maps to the System V - commands with an additional -oraw option for printing. On a Linux - system, you can use the ldd utility to find out details (ldd may not be present on - other OS platforms, or its function may be embodied by a different command): + When Samba is compiled against libcups, printcap = cups + uses the CUPS API to list printers, submit jobs, query queues, and so on. Otherwise it maps to the System V + commands with an additional -oraw option for printing. On a Linux + system, you can use the ldd utility to find out details (ldd may not be present on + other OS platforms, or its function may be embodied by a different command):

     root# ldd `which smbd`
     libssl.so.0.9.6 => /usr/lib/libssl.so.0.9.6 (0x4002d000)
    @@ -8017,726 +8035,785 @@ libcrypto.so.0.9.6 => /usr/lib/libcrypto.so.0.9.6 (0x4005a000)
     libcups.so.2 => /usr/lib/libcups.so.2 (0x40123000)
     [....]
     

    - The line libcups.so.2 => /usr/lib/libcups.so.2 (0x40123000) shows - there is CUPS support compiled into this version of Samba. If this is the case, and printing = cups - is set, then any otherwise manually set print command in smb.conf is ignored. - This is an important point to remember! + The line libcups.so.2 => /usr/lib/libcups.so.2 (0x40123000) shows + there is CUPS support compiled into this version of Samba. If this is the case, and printing = cups + is set, then any otherwise manually set print command in smb.conf is ignored. + This is an important point to remember!

    Tip

    Should it be necessary, for any reason, to set your own print commands, you can do this by setting - printing = sysv. However, you will loose all the benefits + printing = sysv. However, you will loose all the benefits of tight CUPS/Samba integration. When you do this you must manually configure the printing system commands - (most important: print command; other commands are - lppause command, - lpresume command, - lpq command, - lprm command, - queuepause command and - queue resume command).

    Simple smb.conf Settings for CUPS

    - To summarize, here is the simplest printing-related setup for smb.conf to enable basic CUPS support: -

    Example 19.1. Simplest printing-related smb.conf

    [global]
    load printers = yes
    printing = cups
    printcap name = cups
    [printers]
    comment = All Printers
    path = /var/spool/samba
    browseable = no
    public = yes
    guest ok = yes
    writable = no
    printable = yes
    printer admin = root, @ntadmins

    - This is all you need for basic printing setup for CUPS. It will print - all Graphic, Text, PDF and PostScript file submitted from Windows - clients. However, most of your Windows users would not know how to - send these kind of files to print without opening a GUI - application. Windows clients tend to have local printer drivers - installed. And the GUI application's print buttons start a printer - driver. Your users also very rarely send files from the command - line. Unlike UNIX clients, they hardly submit graphic, text or PDF - formatted files directly to the spooler. They nearly exclusively print - from GUI applications, with a "printer driver" hooked in between the - applications native format and the print data stream. If the backend - printer is not a PostScript device, the print data stream is "binary", - sensible only for the target printer. Read on to learn which problem - this may cause and how to avoid it. -

    More complex smb.conf Settings for -CUPS

    -Here is a slightly more complex printing-related setup -for smb.conf. It enables general CUPS printing -support for all printers, but defines one printer share which is set -up differently. -

    Example 19.2. Overriding global CUPS settings for one printer

    [global]
    printing = cups
    printcap name = cups
    load printers = yes
    [printers]
    comment = All Printers
    path = /var/spool/samba
    public = yes
    guest ok = yes
    writable = no
    printable = yes
    printer admin = root, @ntadmins
    [special_printer]
    comment = A special printer with his own settings
    path = /var/spool/samba-special
    printing = sysv
    printcap = lpstat
    print command = echo "NEW: `date`: printfile %f" >> /tmp/smbprn.log ; \
    echo " `date`: p-%p s-%s f-%f" >> /tmp/smbprn.log ; \
    echo " `date`: j-%j J-%J z-%z c-%c" >> /tmp/smbprn.log : rm %f
    public = no
    guest ok = no
    writeable = no
    printable = yes
    printer admin = kurt
    hosts deny = 0.0.0.0
    hosts allow = turbo_xp, 10.160.50.23, 10.160.51.60

    -This special share is only there for testing purposes. It does not write the print job to a file. It just logs the job parameters -known to Samba into the /tmp/smbprn.log file and deletes the jobfile. Moreover, the -printer admin of this share is "kurt" (not the "@ntadmins" group); -guest access is not allowed; the share isn not published to the Network Neighbourhood (so you need to know it is there), and it only -allows access from only three hosts. To prevent CUPS kicking in and taking over the print jobs for that share, we need to set -printing = sysv and -printcap = lpstat. -

    Advanced Configuration

    -Before we delve into all the configuration options, let us clarify a few -points. Network printing needs to be organized and setup -correctly. Often this is not done correctly. Legacy systems -or small business LAN environments often lack design and good housekeeping. -

    Central spooling vs. "Peer-to-Peer" printing

    -Many small office or home networks, as well as badly organized larger -environments, allow each client a direct access to available network -printers. This is generally a bad idea. It often blocks one client's -access to the printer when another client's job is printing. It also -might freeze the first client's application while it is waiting to get -rid of the job. Also, there are frequent complaints about various jobs -being printed with their pages mixed with each other. A better concept -is the usage of a "print server": it routes all jobs through one -central system, which responds immediately, takes jobs from multiple -concurrent clients at the same time and in turn transfers them to the -printer(s) in the correct order. -

    CUPS/Samba as a "spooling-only" Print Server; "raw" printing -with Vendor Drivers on Windows Clients

    -Most traditionally configured UNIX print servers acting on behalf of -Samba's Windows clients represented a really simple setup. Their only -task was to manage the "raw" spooling of all jobs handed to them by -Samba. This approach meant that the Windows clients were expected to -prepare the print job file that it s ready to be sent to the printing -device. Here a native (vendor-supplied) Windows printer -driver for the target device needed to be installed on each and every -client. -

    -It is possible to configure CUPS, Samba and your Windows clients in the -same, traditional and simple way. When CUPS printers are configured -for RAW print-through mode operation it is the responsibility of the -Samba client to fully render the print job (file). The file must be -sent in a format that is suitable for direct delivery to the -printer. Clients need to run the vendor-provided drivers to do -this. In this case CUPS will NOT do any print file format conversion -work. -

    Driver Installation Methods on Windows Clients

    -The printer drivers on the Windows clients may be installed -in two functionally different ways: -

    • manually install the drivers locally on each client, -one by one; this yields the old LanMan style -printing; it uses a \\sambaserver\printershare -type of connection.

    • - - deposit and prepare the drivers (for later download) on -the print server (Samba); this enables the clients to use -"Point and Print" to get drivers semi-automatically installed the -first time they access the printer; with this method NT/2K/XP -clients use the SPOOLSS/MS-RPC -type printing calls.

    -The second method is recommended for use over the first. -

    Explicitly enable "raw" printing for -application/octet-stream!

    -If you use the first option (drivers are installed on the client -side), there is one setting to take care of: CUPS needs to be told -that it should allow "raw" printing of deliberate (binary) file -formats. The CUPS files that need to be correctly set for RAW mode -printers to work are: -

    • /etc/cups/mime.types -

    • /etc/cups/mime.convs

    -Both contain entries (at the end of the respective files) which must -be uncommented to allow RAW mode operation. -In/etc/cups/mime.types make sure this line is -present: -

    - application/octet-stream
    -

    -In /etc/cups/mime.convs, -have this line: -

    - application/octet-stream   application/vnd.cups-raw   0   - 
    -

    -If these two files are not set up correctly for raw Windows client -printing, you may encounter the dreaded Unable to -convert file 0 in your CUPS error_log file. -

    Note

    editing the mime.convs and the -mime.types file does not -enforce "raw" printing, it only -allows it. -

    Background.  -CUPS being a more security-aware printing system than traditional ones -does not by default allow a user to send deliberate (possibly binary) -data to printing devices. This could be easily abused to launch a -"Denial of Service" attack on your printer(s), causing at the least -the loss of a lot of paper and ink. "Unknown" data are tagged by CUPS -as MIME type: application/octet-stream and not -allowed to go to the printer. By default, you can only send other -(known) MIME types "raw". Sending data "raw" means that CUPS does not -try to convert them and passes them to the printer untouched (see next -chapter for even more background explanations). -

    -This is all you need to know to get the CUPS/Samba combo printing -"raw" files prepared by Windows clients, which have vendor drivers -locally installed. If you are not interested in background information about -more advanced CUPS/Samba printing, simply skip the remaining sections -of this chapter. -

    Three familiar Methods for driver upload plus a new one

    -If you want to use the MS-RPC type printing, you must upload the -drivers onto the Samba server first ([print$] -share). For a discussion on how to deposit printer drivers on the -Samba host (so that the Windows clients can download and use them via -"Point'n'Print") please also refer to the previous chapter of this -HOWTO Collection. There you will find a description or reference to -three methods of preparing the client drivers on the Samba server: -

    • the GUI, "Add Printer Wizard" -upload-from-a-Windows-client -method;

    • the commandline, "smbclient/rpcclient" -upload-from-a-UNIX-workstation -method;

    • - - the Imprints Toolset -method.

    -These 3 methods apply to CUPS all the same. A new and more -convenient way to load the Windows drivers into Samba is provided -if you use CUPS: -

    • the cupsaddsmb -utility.

    -cupsaddsmb is discussed in much detail further below. But we will -first explore the CUPS filtering system and compare the Windows and -UNIX printing architectures. -

    Using CUPS/Samba in an advanced Way -- intelligent printing -with PostScript Driver Download

    -Are you still following this? Good. Let's go into more detail then. We now know -how to set up a "dump" printserver, that is, a server which is spooling -printjobs "raw", leaving the print data untouched. -

    -Possibly you need to setup CUPS in a more smart way. The reasons could -be manifold: -

    • Maybe your boss wants to get monthly statistics: Which -printer did how many pages? What was the average data size of a job? -What was the average print run per day? What are the typical hourly -peaks in printing? Which departments prints how -much?

    • Maybe you are asked to setup a print quota system: -users should not be able to print more jobs, once they have surpassed -a given limit per period?

    • Maybe your previous network printing setup is a mess -and shall be re-organized from a clean beginning?

    • Maybe you have experiencing too many "Blue Screens", -originating from poorly debugged printer drivers running in NT "kernel -mode"?

    -These goals cannot be achieved by a raw print server. To build a -server meeting these requirements, you'll first need to learn about -how CUPS works and how you can enable its features. -

    -What follows is the comparison of some fundamental concepts for -Windows and UNIX printing; then is the time for a description of the -CUPS filtering system, how it works and how you can tweak it. -

    GDI on Windows -- PostScript on UNIX

    -Network printing is one of the most complicated and error-prone -day-to-day tasks any user or an administrator may encounter. This is -true for all OS platforms. And there are reasons for this. -

    -You can't expect for most file formats to just throw them towards -printers and they get printed. There needs to be a file format -conversion in between. The problem is: there is no common standard for -print file formats across all manufacturers and printer types. While -PostScript (trademark held by Adobe), and, to an -extent, PCL (trademark held by HP), have developed -into semi-official "standards", by being the most widely used PDLs -(Page Description Languages), there are still -many manufacturers who "roll their own" (their reasons may be -unacceptable license fees for using printer-embedded PostScript -interpreters, etc.). -

    Windows Drivers, GDI and EMF

    -In Windows OS, the format conversion job is done by the printer -drivers. On MS Windows OS platforms all application programmers have -at their disposal a built-in API, the GDI (Graphical Device -Interface), as part and parcel of the OS itself, to base -themselves on. This GDI core is used as one common unified ground, for -all Windows programs, to draw pictures, fonts and documents -on screen as well as on -paper (=print). Therefore printer driver developers can -standardize on a well-defined GDI output for their own driver -input. Achieving WYSIWYG ("What You See Is What You Get") is -relatively easy, because the on-screen graphic primitives, as well as -the on-paper drawn objects, come from one common source. This source, -the GDI, produces often a file format called EMF (Enhanced -MetaFile). The EMF is processed by the printer driver and -converted to the printer-specific file format. -

    Note

    - -To the GDI foundation in MS Windows, Apple has chosen to -put paper and screen output on a common foundation for their -(BSD-UNIX-based, did you know??) Mac OS X and Darwin Operating -Systems. Their Core Graphic Engine uses a -PDF derivative for all display work. -

    + (most important: + print command; other commands are + lppause command, + lpresume command, + lpq command, + lprm command, + queuepause command and + queue resume command).

    Simple smb.conf Settings for CUPS

    + To summarize, shows simplest printing-related setup for smb.conf to enable basic CUPS support: +

    Example 19.1. Simplest printing-related smb.conf

    [global]
    load printers = yes
    printing = cups
    printcap name = cups
    [printers]
    comment = All Printers
    path = /var/spool/samba
    browseable = no
    public = yes
    guest ok = yes
    writable = no
    printable = yes
    printer admin = root, @ntadmins

    + This is all you need for basic printing setup for CUPS. It will print + all graphic, text, PDF, and PostScript files submitted from Windows + clients. However, most of your Windows users would not know how to + send these kinds of files to print without opening a GUI + application. Windows clients tend to have local printer drivers + installed, and the GUI application's print buttons start a printer + driver. Your users also rarely send files from the command + line. Unlike UNIX clients, they hardly submit graphic, text or PDF + formatted files directly to the spooler. They nearly exclusively print + from GUI applications with a “printer driver” hooked in between the + application's native format and the print-data-stream. If the backend + printer is not a PostScript device, the print data stream is “binary,” + sensible only for the target printer. Read on to learn which problem + this may cause and how to avoid it. +

    More Complex CUPS smb.conf Settings

    + is a slightly more complex printing-related setup + for smb.conf. It enables general CUPS printing + support for all printers, but defines one printer share, which is set + up differently. +

    Example 19.2. Overriding global CUPS settings for one printer

    [global]
    printing = cups
    printcap name = cups
    load printers = yes
    [printers]
    comment = All Printers
    path = /var/spool/samba
    public = yes
    guest ok = yes
    writable = no
    printable = yes
    printer admin = root, @ntadmins
    [special_printer]
    comment = A special printer with his own settings
    path = /var/spool/samba-special
    printing = sysv
    printcap = lpstat
    print command = echo "NEW: `date`: printfile %f" >> /tmp/smbprn.log ; \
    echo " `date`: p-%p s-%s f-%f" >> /tmp/smbprn.log ; \
    echo " `date`: j-%j J-%J z-%z c-%c" >> /tmp/smbprn.log : rm %f
    public = no
    guest ok = no
    writeable = no
    printable = yes
    printer admin = kurt
    hosts deny = 0.0.0.0
    hosts allow = turbo_xp, 10.160.50.23, 10.160.51.60

    + This special share is only there for testing purposes. It does not write the print job to a file. It just logs the job parameters + known to Samba into the /tmp/smbprn.log file and deletes the jobfile. Moreover, the + printer admin of this share is “kurt” (not the “@ntadmins” group), + guest access is not allowed, the share isn't published to the Network Neighborhood (so you need to know it is there), and it only + allows access from only three hosts. To prevent CUPS kicking in and taking over the print jobs for that share, we need to set + printing = sysv and + printcap = lpstat. +

    Advanced Configuration

    + Before we delve into all the configuration options, let us clarify a few + points. Network printing needs to be organized and setup + correctly. This frequently doesn't happen. Legacy systems + or small business LAN environments often lack design and good housekeeping. +

    Central Spooling vs. “Peer-to-Peer” Printing

    + + + Many small office or home networks, as well as badly organized larger + environments, allow each client a direct access to available network + printers. This is generally a bad idea. It often blocks one client's + access to the printer when another client's job is printing. It might + freeze the first client's application while it is waiting to get + rid of the job. Also, there are frequent complaints about various jobs + being printed with their pages mixed with each other. A better concept + is the usage of a print server: it routes all jobs through one + central system, which responds immediately, takes jobs from multiple + concurrent clients at the same time, and in turn transfers them to the + printer(s) in the correct order. +

    Raw Print Serving Vendor Drivers on Windows Clients

    + + + Most traditionally configured UNIX print servers acting on behalf of + Samba's Windows clients represented a really simple setup. Their only + task was to manage the “raw” spooling of all jobs handed to them by + Samba. This approach meant that the Windows clients were expected to + prepare the print job file that its ready to be sent to the printing + device. Here is a native (vendor-supplied) Windows printer + driver for the target device needed to be installed on each and every + client. +

    + It is possible to configure CUPS, Samba and your Windows clients in the + same traditional and simple way. When CUPS printers are configured + for RAW print-through mode operation, it is the responsibility of the + Samba client to fully render the print job (file). The file must be + sent in a format that is suitable for direct delivery to the + printer. Clients need to run the vendor-provided drivers to do + this. In this case, CUPS will not do any print file format conversion + work. +

    Installation of Windows Client Drivers

    + The printer drivers on the Windows clients may be installed + in two functionally different ways: +

    • Manually install the drivers locally on each client, + one by one; this yields the old LanMan style + printing and uses a \\sambaserver\printershare + type of connection.

    • + + Deposit and prepare the drivers (for later download) on + the print server (Samba); this enables the clients to use + “Point'n'Print” to get drivers semi-automatically installed the + first time they access the printer; with this method NT/200x/XP + clients use the SPOOLSS/MS-RPC + type printing calls.

    + The second method is recommended for use over the first. +

    Explicitly Enable “raw” Printing for application/octet-stream

    + + + + If you use the first option (drivers are installed on the client + side), there is one setting to take care of: CUPS needs to be told + that it should allow “raw” printing of deliberate (binary) file + formats. The CUPS files that need to be correctly set for RAW mode + printers to work are: +

    • /etc/cups/mime.types

    • /etc/cups/mime.convs

    + Both contain entries (at the end of the respective files) which must + be uncommented to allow RAW mode operation. + In /etc/cups/mime.types, make sure this line is + present: -

    Figure 19.1. Windows Printing to a local Printer

    Windows Printing to a local Printer

    -

    UNIX Printfile Conversion and GUI Basics

    -In UNIX and Linux, there is no comparable layer built into the OS -kernel(s) or the X (screen display) server. Every application is -responsible for itself to create its print output. Fortunately, most -use PostScript. That gives at least some common ground. Unfortunately, -there are many different levels of quality for this PostScript. And -worse: there is a huge difference (and no common root) in the way how -the same document is displayed on screen and how it is presented on -paper. WYSIWYG is more difficult to achieve. This goes back to the -time decades ago, when the predecessors of X.org, -designing the UNIX foundations and protocols for Graphical User -Interfaces refused to take over responsibility for "paper output" -also, as some had demanded at the time, and restricted itself to -"on-screen only". (For some years now, the "Xprint" project has been -under development, attempting to build printing support into the X -framework, including a PostScript and a PCL driver, but it is not yet -ready for prime time.) You can see this unfavorable inheritance up to -the present day by looking into the various "font" directories on your -system; there are separate ones for fonts used for X display and fonts -to be used on paper. -

    Background.  -The PostScript programming language is an "invention" by Adobe Inc., -but its specifications have been published to the full. Its strength -lies in its powerful abilities to describe graphical objects (fonts, -shapes, patterns, lines, curves, dots...), their attributes (color, -linewidth...) and the way to manipulate (scale, distort, rotate, -shift...) them. Because of its open specification, anybody with the -skill can start writing his own implementation of a PostScript -interpreter and use it to display PostScript files on screen or on -paper. Most graphical output devices are based on the concept of -"raster images" or "pixels" (one notable exception are pen -plotters). Of course, you can look at a PostScript file in its textual -form and you will be reading its PostScript code, the language -instructions which need to be interpreted by a rasterizer. Rasterizers -produce pixel images, which may be displayed on screen by a viewer -program or on paper by a printer. -

    PostScript and Ghostscript

    -So, UNIX is lacking a common ground for printing on paper and -displaying on screen. Despite this unfavorable legacy for UNIX, basic -printing is fairly easy: if you have PostScript printers at your -disposal! The reason is: these devices have a built-in PostScript -language "interpreter", also called a Raster Image -Processor (RIP), (which makes them more expensive than -other types of printers); throw PostScript towards them, and they will -spit out your printed pages. Their RIP is doing all the hard work of -converting the PostScript drawing commands into a bitmap picture as -you see it on paper, in a resolution as done by your printer. This is -no different to PostScript printing of a file from a Windows origin. -

    Note

    - -Traditional UNIX programs and printing systems -- while -using PostScript -- are largely not PPD-aware. PPDs are "PostScript -Printer Description" files. They enable you to specify and control all -options a printer supports: duplexing, stapling, punching... Therefore -UNIX users for a long time couldn't choose many of the supported -device and job options, unlike Windows or Apple users. But now there -is CUPS.... -

    -

    Figure 19.2. Printing to a Postscript Printer

    Printing to a Postscript Printer

    -

    -However, there are other types of printers out there. These don't know -how to print PostScript. They use their own Page Description -Language (PDL, often proprietary). To print to them is much -more demanding. Since your UNIX applications mostly produce -PostScript, and since these devices don't understand PostScript, you -need to convert the printfiles to a format suitable for your printer -on the host, before you can send it away. -

    Ghostscript -- the Software RIP for non-PostScript Printers

    -Here is where Ghostscript kicks in. Ghostscript is -the traditional (and quite powerful) PostScript interpreter used on -UNIX platforms. It is a RIP in software, capable to do a -lot of file format conversions, for a very broad -spectrum of hardware devices as well as software file formats. -Ghostscript technology and drivers is what enables PostScript printing -to non-PostScript hardware. -

    -

    Figure 19.3. Ghostscript as a RIP for non-postscript printers

    Ghostscript as a RIP for non-postscript printers

    -

    Tip

    -Use the "gs -h" command to check for all built-in "devices" of your -Ghostscript version. If you specify e.g. a parameter of --sDEVICE=png256 on your Ghostscript command -line, you are asking Ghostscript to convert the input into a PNG -file. Naming a "device" on the commandline is the most important -single parameter to tell Ghostscript how exactly it should render the -input. New Ghostscript versions are released at fairly regular -intervals, now by artofcode LLC. They are initially put under the -"AFPL" license, but re-released under the GNU GPL as soon as the next -AFPL version appears. GNU Ghostscript is probably the version -installed on most Samba systems. But it has got some -deficiencies. Therefore ESP Ghostscript was developed as an -enhancement over GNU Ghostscript, with lots of bug-fixes, additional -devices and improvements. It is jointly maintained by developers from -CUPS, Gimp-Print, MandrakeSoft, SuSE, RedHat and Debian. It includes -the "cups" device (essential to print to non-PS printers from CUPS). -

    PostScript Printer Description (PPD) Specification

    -While PostScript in essence is a Page Description -Language (PDL) to represent the page layout in a -device independent way, real world print jobs are -always ending up to be output on a hardware with device-specific -features. To take care of all the differences in hardware, and to -allow for innovations, Adobe has specified a syntax and file format -for PostScript Printer Description (PPD) -files. Every PostScript printer ships with one of these files. -

    -PPDs contain all information about general and special features of the -given printer model: Which different resolutions can it handle? Does -it have a Duplexing Unit? How many paper trays are there? What media -types and sizes does it take? For each item it also names the special -command string to be sent to the printer (mostly inside the PostScript -file) in order to enable it. -

    -Information from these PPDs is meant to be taken into account by the -printer drivers. Therefore, installed as part of the Windows -PostScript driver for a given printer is the printer's PPD. Where it -makes sense, the PPD features are presented in the drivers' UI dialogs -to display to the user as choice of print options. In the end, the -user selections are somehow written (in the form of special -PostScript, PJL, JCL or vendor-dependent commands) into the PostScript -file created by the driver. -

    Warning

    - -A PostScript file that was created to contain device-specific commands -for achieving a certain print job output (e.g. duplexed, stapled and -punched) on a specific target machine, may not print as expected, or -may not be printable at all on other models; it also may not be fit -for further processing by software (e.g. by a PDF distilling program). -

    CUPS can use all Windows-formatted Vendor PPDs

    -CUPS can handle all spec-compliant PPDs as supplied by the -manufacturers for their PostScript models. Even if a -UNIX/Linux-illiterate vendor might not have mentioned our favorite -OS in his manuals and brochures -- you can safely trust this: -if you get hold of the Windows NT version of the PPD, you -can use it unchanged in CUPS and thus access the full -power of your printer just like a Windows NT user could! -

    Tip

    -To check the spec compliance of any PPD online, go to http://www.cups.org/testppd.php -and upload your PPD. You will see the results displayed -immediately. CUPS in all versions after 1.1.19 has a much more strict -internal PPD parsing and checking code enabled; in case of printing -trouble this online resource should be one of your first pitstops. -

    Warning

    - - -For real PostScript printers don't use the -Foomatic or cupsomatic -PPDs from Linuxprinting.org. With these devices the original -vendor-provided PPDs are always the first choice! -

    Tip

    -If you are looking for an original vendor-provided PPD of a specific -device, and you know that an NT4 box (or any other Windows box) on -your LAN has the PostScript driver installed, just use -smbclient //NT4-box/print\$ -U username to -access the Windows directory where all printer driver files are -stored. First look in the W32X86/2 subdir for -the PPD you are seeking. -

    CUPS also uses PPDs for non-PostScript Printers

    -CUPS also uses specially crafted PPDs to handle non-PostScript -printers. These PPDs are usually not available from the vendors (and -no, you can't just take the PPD of a Postscript printer with the same -model name and hope it works for the non-PostScript version too). To -understand how these PPDs work for non-PS printers we first need to -dive deeply into the CUPS filtering and file format conversion -architecture. Stay tuned. -

    The CUPS Filtering Architecture

    +

    +	 application/octet-stream
    +	

    + + + + + In /etc/cups/mime.convs, + have this line: + + + +

    +		application/octet-stream   application/vnd.cups-raw   0   - 
    +	

    + + If these two files are not set up correctly for raw Windows client + printing, you may encounter the dreaded Unable to + convert file 0 in your CUPS error_log file. +

    Note

    Editing the mime.convs and the + mime.types file does not + enforceraw” printing, it only + allows it. +

    Background.  + + CUPS being a more security-aware printing system than traditional ones + does not by default allow a user to send deliberate (possibly binary) + data to printing devices. This could be easily abused to launch a + “Denial of Service” attack on your printer(s), causing at least + the loss of a lot of paper and ink. “Unknown” data are tagged by CUPS + as MIME type: application/octet-stream and not + allowed to go to the printer. By default, you can only send other + (known) MIME types “raw”. Sending data “raw” means that CUPS does not + try to convert them and passes them to the printer untouched (see the next + chapter for even more background explanations). +

    + This is all you need to know to get the CUPS/Samba combo printing + “raw” files prepared by Windows clients, which have vendor drivers + locally installed. If you are not interested in background information about + more advanced CUPS/Samba printing, simply skip the remaining sections + of this chapter. +

    Driver Upload Methods

    + This section describes three familiar methods, plus one new one, by which + printer drivers may be uploaded. +

    + + If you want to use the MS-RPC type printing, you must upload the + drivers onto the Samba server first ([print$] + share). For a discussion on how to deposit printer drivers on the + Samba host (so the Windows clients can download and use them via + “Point'n'Print”), please refer to the previous chapter of this + HOWTO Collection. There you will find a description or reference to + three methods of preparing the client drivers on the Samba server: +

    • + + The GUI, “Add Printer Wizard” + upload-from-a-Windows-client + method.

    • The command line, “smbclient/rpcclient” + upload-from-a-UNIX-workstation method.

    • + + The Imprints Toolset + method.

    + These three methods apply to CUPS all the same. A new and more + convenient way to load the Windows drivers into Samba is provided + if you use CUPS: +

    • + + the cupsaddsmb + utility.

    + cupsaddsmb is discussed in much detail further below. But we first + explore the CUPS filtering system and compare the Windows and UNIX printing architectures. +

    Advanced Intelligent Printing with PostScript Driver Download

    + + We now know + how to set up a “dump” printserver, that is, a server which is spooling + printjobs “raw”, leaving the print data untouched. +

    + Possibly you need to setup CUPS in a smarter way. The reasons could + be manifold: +

    • Maybe your boss wants to get monthly statistics: Which + printer did how many pages? What was the average data size of a job? + What was the average print run per day? What are the typical hourly + peaks in printing? Which department prints how much?

    • Maybe you are asked to setup a print quota system: + Users should not be able to print more jobs, once they have surpassed + a given limit per period.

    • Maybe your previous network printing setup is a mess + and must be re-organized from a clean beginning.

    • Maybe you have experiencing too many “blue screens” + originating from poorly debugged printer drivers running in NT “kernel mode”?

    + These goals cannot be achieved by a raw print server. To build a + server meeting these requirements, you'll first need to learn about + how CUPS works and how you can enable its features. +

    + What follows is the comparison of some fundamental concepts for + Windows and UNIX printing; then follows a description of the + CUPS filtering system, how it works and how you can tweak it. +

    GDI on Windows -- PostScript on UNIX

    + + + Network printing is one of the most complicated and error-prone + day-to-day tasks any user or administrator may encounter. This is + true for all OS platforms. And there are reasons for this. +

    + + + You can't expect most file formats to just throw them toward + printers and they get printed. There needs to be a file format + conversion in between. The problem is that there is no common standard for + print file formats across all manufacturers and printer types. While + PostScript (trademark held by Adobe) and, to an + extent, PCL (trademark held by HP) have developed + into semi-official “standards” by being the most widely used PDLs + Page Description Languages (PDLs), there are still + many manufacturers who “roll their own” (their reasons may be + unacceptable license fees for using printer-embedded PostScript + interpreters, and so on). +

    Windows Drivers, GDI and EMF

    + + + + In Windows OS, the format conversion job is done by the printer + drivers. On MS Windows OS platforms all application programmers have + at their disposal a built-in API, the Graphical Device + Interface (GDI), as part and parcel of the OS itself to base + themselves on. This GDI core is used as one common unified ground for + all Windows programs to draw pictures, fonts and documents + on screen as well as on + paper (print). Therefore, printer driver developers can + standardize on a well-defined GDI output for their own driver + input. Achieving WYSIWYG (“What You See Is What You Get”) is + relatively easy, because the on-screen graphic primitives, as well as + the on-paper drawn objects, come from one common source. This source, + the GDI, often produces a file format called Enhanced + MetaFile (EMF). The EMF is processed by the printer driver and + converted to the printer-specific file format. +

    Note

    + + To the GDI foundation in MS Windows, Apple has chosen to + put paper and screen output on a common foundation for their + (BSD-UNIX-based, did you know?) Mac OS X and Darwin Operating + + + + + Systems. Their Core Graphic Engine uses a + PDF derivative for all display work. +

    + +

    Figure 19.1. Windows printing to a local printer.

    Windows printing to a local printer.

    +

    UNIX Printfile Conversion and GUI Basics

    + + + + + In UNIX and Linux, there is no comparable layer built into the OS + kernel(s) or the X (screen display) server. Every application is + responsible for itself to create its print output. Fortunately, most + use PostScript and that at least gives some common ground. Unfortunately, + there are many different levels of quality for this PostScript. And + worse, there is a huge difference (and no common root) in the way + the same document is displayed on screen and how it is presented on + paper. WYSIWYG is more difficult to achieve. This goes back to the + time, decades ago, when the predecessors of X.org, + designing the UNIX foundations and protocols for Graphical User + Interfaces, refused to take responsibility for “paper output” + also, as some had demanded at the time, and restricted itself to + “on-screen only.” (For some years now, the “Xprint” project has been + under development, attempting to build printing support into the X + framework, including a PostScript and a PCL driver, but it is not yet + ready for prime time.) You can see this unfavorable inheritance up to + the present day by looking into the various “font” directories on your + system; there are separate ones for fonts used for X display and fonts + to be used on paper. +

    Background.  + + The PostScript programming language is an “invention” by Adobe Inc., + but its specifications have been published to the full. Its strength + lies in its powerful abilities to describe graphical objects (fonts, + shapes, patterns, lines, curves, and dots), their attributes (color, + linewidth) and the way to manipulate (scale, distort, rotate, + shift) them. Because of its open specification, anybody with the + skill can start writing his own implementation of a PostScript + interpreter and use it to display PostScript files on screen or on + paper. Most graphical output devices are based on the concept of + “raster images” or “pixels” (one notable exception is pen + plotters). Of course, you can look at a PostScript file in its textual + form and you will be reading its PostScript code, the language + instructions which need to be interpreted by a rasterizer. Rasterizers + produce pixel images, which may be displayed on screen by a viewer + program or on paper by a printer. +

    PostScript and Ghostscript

    + + + + So, UNIX is lacking a common ground for printing on paper and + displaying on screen. Despite this unfavorable legacy for UNIX, basic + printing is fairly easy if you have PostScript printers at your + disposal. The reason is these devices have a built-in PostScript + language “interpreter,” also called a Raster Image + Processor (RIP) (which makes them more expensive than + other types of printers); throw PostScript toward them, and they will + spit out your printed pages. Their RIP is doing all the hard work of + converting the PostScript drawing commands into a bitmap picture as + you see it on paper, in a resolution as done by your printer. This is + no different to PostScript printing a file from a Windows origin. +

    Note

    + + Traditional UNIX programs and printing systems while + using PostScript are largely not PPD-aware. PPDs are “PostScript + Printer Description” files. They enable you to specify and control all + options a printer supports: duplexing, stapling and punching. Therefore, + UNIX users for a long time couldn't choose many of the supported + device and job options, unlike Windows or Apple users. But now there + is CUPS. +

    +

    Figure 19.2. Printing to a PostScript printer.

    Printing to a PostScript printer.

    +

    + + However, there are other types of printers out there. These do not know + how to print PostScript. They use their own Page Description + Language (PDL, often proprietary). To print to them is much + more demanding. Since your UNIX applications mostly produce + PostScript, and since these devices do not understand PostScript, you + need to convert the printfiles to a format suitable for your printer + on the host before you can send it away. +

    Ghostscript the Software RIP for Non-PostScript Printers

    + + Here is where Ghostscript kicks in. Ghostscript is + the traditional (and quite powerful) PostScript interpreter used on + UNIX platforms. It is a RIP in software, capable of doing a + lot of file format conversions for a very broad + spectrum of hardware devices as well as software file formats. + Ghostscript technology and drivers are what enable PostScript printing + to non-PostScript hardware. +

    +

    Figure 19.3. Ghostscript as a RIP for non-postscript printers.

    Ghostscript as a RIP for non-postscript printers.

    +

    Tip

    + Use the “gs -h” command to check for all built-in “devices” + of your Ghostscript version. If you specify a parameter of + -sDEVICE=png256 on your Ghostscript command + line, you are asking Ghostscript to convert the input into a PNG + file. Naming a “device” on the command line is the most important + single parameter to tell Ghostscript exactly how it should render the + input. New Ghostscript versions are released at fairly regular + intervals, now by artofcode LLC. They are initially put under the + “AFPL” license, but re-released under the GNU GPL as soon as the next + AFPL version appears. GNU Ghostscript is probably the version + installed on most Samba systems. But it has some deficiencies. + + Therefore, ESP Ghostscript was developed as an + enhancement over GNU Ghostscript, with lots of bug-fixes, additional + devices and improvements. It is jointly maintained by developers from + CUPS, Gimp-Print, MandrakeSoft, SuSE, RedHat, and Debian. It includes + the “cups” device (essential to print to non-PS printers from CUPS). +

    PostScript Printer Description (PPD) Specification

    + + While PostScript in essence is a Page Description + Language (PDL) to represent the page layout in a + device-independent way, real-world print jobs are + always ending up being output on hardware with device-specific + features. To take care of all the differences in hardware and to + allow for innovations, Adobe has specified a syntax and file format + for PostScript Printer Description (PPD) + files. Every PostScript printer ships with one of these files. +

    + PPDs contain all the information about general and special features of the + given printer model: Which different resolutions can it handle? Does + it have a Duplexing Unit? How many paper trays are there? What media + types and sizes does it take? For each item, it also names the special + command string to be sent to the printer (mostly inside the PostScript + file) in order to enable it. +

    + Information from these PPDs is meant to be taken into account by the + printer drivers. Therefore, installed as part of the Windows + PostScript driver for a given printer is the printer's PPD. Where it + makes sense, the PPD features are presented in the drivers' UI dialogs + to display to the user a choice of print options. In the end, the + user selections are somehow written (in the form of special + PostScript, PJL, JCL or vendor-dependent commands) into the PostScript + file created by the driver. +

    Warning

    + + A PostScript file that was created to contain device-specific commands + for achieving a certain print job output (e.g., duplexed, stapled and + punched) on a specific target machine, may not print as expected, or + may not be printable at all on other models; it also may not be fit + for further processing by software (e.g., by a PDF distilling program). +

    Using Windows-Formatted Vendor PPDs

    + CUPS can handle all spec-compliant PPDs as supplied by the + manufacturers for their PostScript models. Even if a + vendor might not have mentioned our favorite + OS in his manuals and brochures, you can safely trust this: + If you get the Windows NT version of the PPD, you + can use it unchanged in CUPS and thus access the full + power of your printer just like a Windows NT user could! +

    Tip

    + To check the spec compliance of any PPD online, go to http://www.cups.org/testppd.php + and upload your PPD. You will see the results displayed + immediately. CUPS in all versions after 1.1.19 has a much more strict + internal PPD parsing and checking code enabled; in case of printing + trouble, this online resource should be one of your first pitstops. +

    Warning

    + + + For real PostScript printers, do not use the + Foomatic or cupsomatic + PPDs from Linuxprinting.org. With these devices, the original + vendor-provided PPDs are always the first choice! +

    Tip

    + If you are looking for an original vendor-provided PPD of a specific + device, and you know that an NT4 box (or any other Windows box) on + your LAN has the PostScript driver installed, just use + smbclient //NT4-box/print\$ -U username to + access the Windows directory where all printer driver files are + stored. First look in the W32X86/2 subdir for + the PPD you are seeking. +

    CUPS Also Uses PPDs for Non-PostScript Printers

    + CUPS also uses specially crafted PPDs to handle non-PostScript + printers. These PPDs are usually not available from the vendors (and + no, you can't just take the PPD of a PostScript printer with the same + model name and hope it works for the non-PostScript version too). To + understand how these PPDs work for non-PS printers, we first need to + dive deeply into the CUPS filtering and file format conversion + architecture. Stay tuned. +

    The CUPS Filtering Architecture

    The core of the CUPS filtering system is based on -Ghostscript. In addition to Ghostscript, CUPS +Ghostscript. In addition to Ghostscript, CUPS uses some other filters of its own. You (or your OS vendor) may have plugged in even more filters. CUPS handles all data file formats under -the label of various MIME types. Every incoming +the label of various MIME types. Every incoming printfile is subjected to an initial -auto-typing. The auto-typing determines its given +auto-typing. The auto-typing determines its given MIME type. A given MIME type implies zero or more possible filtering chains relevant to the selected target printer. This section discusses how MIME types recognition and conversion rules interact. They are used by CUPS to automatically setup a working filtering chain for any given input data format.

    -If CUPS rasterizes a PostScript file natively to -a bitmap, this is done in 2 stages: -

    • the first stage uses a Ghostscript device named "cups" +If CUPS rasterizes a PostScript file natively to +a bitmap, this is done in two stages: +

      • The first stage uses a Ghostscript device named “cups” (this is since version 1.1.15) and produces a generic raster format -called "CUPS raster". -

      • the second stage uses a "raster driver" which converts -the generic CUPS raster to a device specific raster.

      -Make sure your Ghostscript version has the "cups" device compiled in -(check with gs -h | grep cups). Otherwise you +called “CUPS raster”. +

    • The second stage uses a “raster driver” that converts + the generic CUPS raster to a device-specific raster.

    +Make sure your Ghostscript version has the “cups” device compiled in +(check with gs -h | grep cups). Otherwise you may encounter the dreaded Unable to convert file -0 in your CUPS error_log file. To have "cups" as a -device in your Ghostscript, you either need to patch GNU -Ghostscript and re-compile or use ESP Ghostscript. The -superior alternative is ESP Ghostscript: it supports not just CUPS, +0 in your CUPS error_log file. To have “cups” as a +device in your Ghostscript, you either need to patch GNU +Ghostscript and re-compile, or use ESP Ghostscript. The +superior alternative is ESP Ghostscript. It supports not just CUPS, but 300 other devices too (while GNU Ghostscript supports only about 180). Because of this broad output device support, ESP Ghostscript is -the first choice for non-CUPS spoolers too. It is now recommended by +the first choice for non-CUPS spoolers, too. It is now recommended by Linuxprinting.org for all spoolers.

    - - -CUPS printers may be setup to use external -rendering paths. One of the most common ones is provided by the -Foomatic/cupsomatic concept, from Linuxprinting.org. This + + +CUPS printers may be setup to use external +rendering paths. One of the most common is provided by the +Foomatic/cupsomatic concept from Linuxprinting.org. This uses the classical Ghostscript approach, doing everything in one -step. It doesn't use the "cups" device, but one of the many +step. It does not use the “cups” device, but one of the many others. However, even for Foomatic/cupsomatic usage, best results and - + broadest printer model support is provided by ESP Ghostscript (more about cupsomatic/Foomatic, particularly the new version called now foomatic-rip, follows below). -

    MIME types and CUPS Filters

    - +

    MIME Types and CUPS Filters

    + + CUPS reads the file /etc/cups/mime.types (and all other files carrying a *.types suffix in the same directory) upon startup. These files contain the MIME -type recognition rules which are applied when CUPS runs its +type recognition rules that are applied when CUPS runs its auto-typing routines. The rule syntax is explained in the man page for mime.types and in the comments section of the mime.types file itself. A simple rule reads like this: -

    - -

    +
    +
    +

      application/pdf         pdf string(0,%PDF)
     

    -This means: if a filename has either a -.pdf suffix, or if the magic + +This means if a filename has either a +.pdf suffix or if the magic string %PDF is right at the beginning of the file itself (offset 0 from the start), then it is -a PDF file (application/pdf). +a PDF file (application/pdf). Another rule is this: -

    +
    +

      application/postscript  ai eps ps string(0,%!) string(0,<04>%!)
     

    -Its meaning: if the filename has one of the suffixes + +If the filename has one of the suffixes .ai, .eps, .ps or if the file itself starts with one of the strings %! or <04>%!, it is a generic PostScript file -(application/postscript). -

    Note

    -There is a very important difference between two similar MIME type in -CUPS: one is application/postscript, the other is -application/vnd.cups-postscript. While -application/postscript is meant to be device +(application/postscript). +

    Warning

    +Don't confuse the other mime.types files your system might be using +with the one in the /etc/cups/ directory. +

    Note

    +There is an important difference between two similar MIME types in +CUPS: one is application/postscript, the other is +application/vnd.cups-postscript. While +application/postscript is meant to be device independent (job options for the file are still outside the PS file -content, embedded in commandline or environment variables by CUPS), -application/vnd.cups-postscript may have the job -options inserted into the PostScript data itself (were +content, embedded in command line or environment variables by CUPS), +application/vnd.cups-postscript may have the job +options inserted into the PostScript data itself (where applicable). The transformation of the generic PostScript -(application/postscript) to the device-specific version -(application/vnd.cups-postscript) is the responsibility of the -CUPS pstops filter. pstops uses information +(application/postscript) to the device-specific version +(application/vnd.cups-postscript) is the responsibility of the +CUPS pstops filter. pstops uses information contained in the PPD to do the transformation. -

    Warning

    -Don't confuse the other mime.types file your system might be using -with the one in the /etc/cups/ directory.

    -CUPS can handle ASCII text, HP-GL, PDF, PostScript, DVI and a -lot of image formats (GIF. PNG, TIFF, JPEG, Photo-CD, SUN-Raster, -PNM, PBM, SGI-RGB and some more) and their associated MIME types +CUPS can handle ASCII text, HP-GL, PDF, PostScript, DVI, and +many image formats (GIF. PNG, TIFF, JPEG, Photo-CD, SUN-Raster, +PNM, PBM, SGI-RGB, and more) and their associated MIME types with its filters. -

    MIME type Conversion Rules

    +

    MIME Type Conversion Rules

    + + CUPS reads the file /etc/cups/mime.convs (and all other files named with a *.convs suffix in the same directory) upon startup. These files contain lines naming an input MIME type, an output MIME type, a format -conversion filter which can produce the output from the input type +conversion filter that can produce the output from the input type and virtual costs associated with this conversion. One example line reads like this: -

    +
    +

      application/pdf         application/postscript   33   pdftops
     

    -This means that the pdftops filter will take -application/pdf as input and produce -application/postscript as output, the virtual + +This means that the pdftops filter will take +application/pdf as input and produce +application/postscript as output; the virtual cost of this operation is 33 CUPS-$. The next filter is more expensive, costing 66 CUPS-$: -

    +
    +
    +
    +

      application/vnd.hp-HPGL application/postscript   66   hpgltops
     

    -This is the hpgltops, which processes HP-GL + +This is the hpgltops, which processes HP-GL plotter files to PostScript. -

    +
    +
    +
    +

      application/octet-stream
     

    + Here are two more examples: -

    +
    +
    +
    +

      application/x-shell     application/postscript   33    texttops
      text/plain              application/postscript   33    texttops
     

    -The last two examples name the texttops filter -to work on "text/plain" as well as on "application/x-shell". (Hint: -this differentiation is needed for the syntax highlighting feature of -"texttops"). -

    Filter Requirements

    -There are many more combinations named in mime.convs. However, you + +The last two examples name the texttops filter +to work on text/plain as well as on application/x-shell. (Hint: +This differentiation is needed for the syntax highlighting feature of +texttops). +

    Filtering Overview

    + +There are many more combinations named in mime.convs. However, you are not limited to use the ones pre-defined there. You can plug in any filter you like into the CUPS framework. It must meet, or must be made -to meet some minimal requirements. If you find (or write) a cool +to meet, some minimal requirements. If you find (or write) a cool conversion filter of some kind, make sure it complies to what CUPS -needs, and put in the right lines in mime.types +needs and put in the right lines in mime.types and mime.convs, then it will work seamlessly -inside CUPS! -

    Tip

    -The mentioned "CUPS requirements" for filters are simple. Take +inside CUPS. +

    Filter requirements

    +The mentioned “CUPS requirements” for filters are simple. Take filenames or stdin as input and write to stdout. They should take these 5 or 6 arguments: printer job user title copies options [filename] -

    Printer

    The name of the printer queue (normally this is the -name of the filter being run)

    job

    The numeric job ID for the job being -printed

    user

    The string from the originating-user-name -attribute

    title

    The string from the job-name attribute

    copies

    The numeric value from the number-copies -attribute

    options

    The job options

    filename

    (Optionally) The print request file (if missing, +

    Printer

    The name of the printer queue (normally this is the +name of the filter being run).

    job

    The numeric job ID for the job being +printed.

    user

    The string from the originating-user-name +attribute.

    title

    The string from the job-name attribute.

    copies

    The numeric value from the number-copies +attribute.

    options

    The job options.

    filename

    (Optionally) The print request file (if missing, filters expected data fed through stdin). In most -cases it is very easy to write a simple wrapper script around existing -filters to make them work with CUPS.

    Prefilters

    -As was said, PostScript is the central file format to any UNIX based +cases, it is easy to write a simple wrapper script around existing +filters to make them work with CUPS.

    Prefilters

    + +As previously stated, PostScript is the central file format to any UNIX-based printing system. From PostScript, CUPS generates raster data to feed non-PostScript printers.

    -But what is happening if you send one of the supported non-PS formats -to print? Then CUPS runs "pre-filters" on these input formats to +But what happens if you send one of the supported non-PS formats +to print? Then CUPS runs “pre-filters” on these input formats to generate PostScript first. There are pre-filters to create PS from -ASCII text, PDF, DVI or HP-GL. The outcome of these filters is always -of MIME type application/postscript (meaning that +ASCII text, PDF, DVI, or HP-GL. The outcome of these filters is always +of MIME type application/postscript (meaning that any device-specific print options are not yet embedded into the PostScript by CUPS, and that the next filter to be called is pstops). Another pre-filter is running on all supported image formats, -the imagetops filter. Its outcome is always of -MIME type application/vnd.cups-postscript -(not application/postscript), meaning it has the +the imagetops filter. Its outcome is always of +MIME type application/vnd.cups-postscript +(not application/postscript), meaning it has the print options already embedded into the file.

    -

    Figure 19.4. Prefiltering in CUPS to form Postscript

    Prefiltering in CUPS to form Postscript

    -

    pstops

    -pstopsis the filter to convert -application/postscript to -application/vnd.cups-postscript. It was said +

    Figure 19.4. Pre-filtering in CUPS to form PostScript.

    Pre-filtering in CUPS to form PostScript.

    +

    pstops

    +pstops is the filter to convert +application/postscript to +application/vnd.cups-postscript. It was said above that this filter inserts all device-specific print options (commands to the printer to ask for the duplexing of output, or -stapling an punching it, etc.) into the PostScript file. +stapling and punching it, and so on) into the PostScript file.

    -

    Figure 19.5. Adding Device-specific Print Options

    Adding Device-specific Print Options

    +

    Figure 19.5. Adding device-specific print options.

    Adding device-specific print options.

    -This is not all: other tasks performed by it are: +This is not all. Other tasks performed by it are:

    • -selecting the range of pages to be printed (if you choose to -print only pages "3, 6, 8-11, 16, 19-21", or only the odd numbered -ones) +Selecting the range of pages to be printed (if you choose to +print only pages “3, 6, 8-11, 16, 19-21”, or only the odd numbered +ones).

    • -putting 2 or more logical pages on one sheet of paper (the -so-called "number-up" function) -

    • counting the pages of the job to insert the accounting -information into the /var/log/cups/page_log -

    pstoraster

    -pstoraster is at the core of the CUPS filtering +Putting 2 or more logical pages on one sheet of paper (the +so-called “number-up” function). +

  • Counting the pages of the job to insert the accounting +information into the /var/log/cups/page_log. +

  • pstoraster

    +pstoraster is at the core of the CUPS filtering system. It is responsible for the first stage of the rasterization process. Its input is of MIME type application/vnd.cups-postscript; its output is application/vnd.cups-raster. This output format is not yet meant to be printable. Its aim is to serve as a general purpose -input format for more specialized raster drivers, +input format for more specialized raster drivers that are able to generate device-specific printer data.

    -

    Figure 19.6. Postscript to intermediate Raster format

    Postscript to intermediate Raster format

    +

    Figure 19.6. PostScript to intermediate raster format.

    PostScript to intermediate raster format.

    CUPS raster is a generic raster format with powerful features. It is -able to include per-page information, color profiles and more to be +able to include per-page information, color profiles, and more, to be used by the following downstream raster drivers. Its MIME type is -registered with IANA and its specification is of course completely -open. It is designed to make it very easy and inexpensive for +registered with IANA and its specification is, of course, completely +open. It is designed to make it quite easy and inexpensive for manufacturers to develop Linux and UNIX raster drivers for their printer models, should they choose to do so. CUPS always takes care -for the first stage of rasterization so these vendors don't need to care +for the first stage of rasterization so these vendors do not need to care about Ghostscript complications (in fact, there is currently more than one vendor financing the development of CUPS raster drivers).

    -

    Figure 19.7. CUPS-raster production using Ghostscript

    CUPS-raster production using Ghostscript

    +

    Figure 19.7. CUPS-raster production using Ghostscript.

    CUPS-raster production using Ghostscript.

    CUPS versions before version 1.1.15 were shipping a binary (or source -code) standalone filter, named "pstoraster". pstoraster was derived +code) standalone filter, named pstoraster. pstoraster was derived from GNU Ghostscript 5.50, and could be installed besides and in addition to any GNU or AFPL Ghostscript package without conflicting.

    -From version 1.1.15, this has changed. The functions for this has been +>From version 1.1.15, this has changed. The functions for this have been integrated back into Ghostscript (now based on GNU Ghostscript version -7.05). The "pstoraster" filter is now a simple shell script calling +7.05). The pstoraster filter is now a simple shell script calling gs with the -sDEVICE=cups -parameter. If your Ghostscript doesn't show a success on asking for +parameter. If your Ghostscript does not show a success on asking for gs -h |grep cups, you might not be able to -print. Update your Ghostscript then! -

    imagetops and imagetoraster

    -Above in the section about prefilters, we mentioned the prefilter -that generates PostScript from image formats. The imagetoraster +print. Update your Ghostscript. +

    imagetops and imagetoraster

    +In the section about pre-filters, we mentioned the pre-filter +that generates PostScript from image formats. The imagetoraster filter is used to convert directly from image to raster, without the intermediate PostScript stage. It is used more often than the above -mentioned prefilters. Here is a summarizing flowchart of image file -filtering: +mentioned pre-filters. A summarizing flowchart of image file +filtering is shown in .

    -

    Figure 19.8. Image format to CUPS-raster format conversion

    Image format to CUPS-raster format conversion

    -

    rasterto [printers specific]

    -CUPS ships with quite some different raster drivers processing CUPS +

    Figure 19.8. Image format to CUPS-raster format conversion.

    Image format to CUPS-raster format conversion.

    +

    rasterto [printers specific]

    +CUPS ships with quite different raster drivers processing CUPS raster. On my system I find in /usr/lib/cups/filter/ these: rastertoalps, rastertobj, rastertoepson, rastertoescp, rastertopcl, rastertoturboprint, rastertoapdk, rastertodymo, -rastertoescp, rastertohp and +rastertoescp, rastertohp, and rastertoprinter. Don't worry if you have less than this; some of these are installed by commercial add-ons to CUPS (like rastertoturboprint), others (like -rastertoprinter) by 3rd party driver +rastertoprinter) by third-party driver development projects (such as Gimp-Print) wanting to cooperate as closely as possible with CUPS.

    -

    Figure 19.9. Raster to Printer Specific formats

    Raster to Printer Specific formats

    -

    CUPS Backends

    -The last part of any CUPS filtering chain is a "backend". Backends +

    Figure 19.9. Raster to printer-specific formats.

    Raster to printer-specific formats.

    +

    CUPS Backends

    +The last part of any CUPS filtering chain is a backend. Backends are special programs that send the print-ready file to the final device. There is a separate backend program for any transfer -"protocol" of sending printjobs over the network, or for every local -interface. Every CUPS printqueue needs to have a CUPS "device-URI" +protocol of sending printjobs over the network, or for every local +interface. Every CUPS print queue needs to have a CUPS “device-URI” associated with it. The device URI is the way to encode the backend used to send the job to its destination. Network device-URIs are using two slashes in their syntax, local device URIs only one, as you can see from the following list. Keep in mind that local interface names may vary much from my examples, if your OS is not Linux: -

    usb

    -This backend sends printfiles to USB-connected printers. An -example for the CUPS device-URI to use is: -usb:/dev/usb/lp0 -

    serial

    -This backend sends printfiles to serially connected printers. -An example for the CUPS device-URI to use is: -serial:/dev/ttyS0?baud=11500 -

    parallel

    -This backend sends printfiles to printers connected to the -parallel port. An example for the CUPS device-URI to use is: -parallel:/dev/lp0 -

    scsi

    -This backend sends printfiles to printers attached to the -SCSI interface. An example for the CUPS device-URI to use is: -scsi:/dev/sr1 -

    lpd

    -This backend sends printfiles to LPR/LPD connected network -printers. An example for the CUPS device-URI to use is: -lpd://remote_host_name/remote_queue_name -

    AppSocket/HP JetDirect

    -This backend sends printfiles to AppSocket (a.k.a. "HP -JetDirect") connected network printers. An example for the CUPS -device-URI to use is: -socket://10.11.12.13:9100 -

    ipp

    -This backend sends printfiles to IPP connected network -printers (or to other CUPS servers). Examples for CUPS device-URIs -to use are: -ipp:://192.193.194.195/ipp -(for many HP printers) or -ipp://remote_cups_server/printers/remote_printer_name -

    http

    -This backend sends printfiles to HTTP connected printers. -(The http:// CUPS backend is only a symlink to the ipp:// backend.) -Examples for the CUPS device-URIs to use are: -http:://192.193.194.195:631/ipp -(for many HP printers) or -http://remote_cups_server:631/printers/remote_printer_name -

    smb

    -This backend sends printfiles to printers shared by a Windows -host. An example for CUPS device-URIs to use are: -smb://workgroup/server/printersharename -Or -smb://server/printersharename -or -smb://username:password@workgroup/server/printersharename -or -smb://username:password@server/printersharename. -The smb:// backend is a symlink to the Samba utility -smbspool (doesn't ship with CUPS). If the -symlink is not present in your CUPS backend directory, have your -root user create it: ln -s `which smbspool` -/usr/lib/cups/backend/smb. -

    -It is easy to write your own backends as Shell or Perl scripts, if you +

    usb

    + This backend sends printfiles to USB-connected printers. An + example for the CUPS device-URI to use is: + usb:/dev/usb/lp0. +

    serial

    + This backend sends printfiles to serially connected printers. + An example for the CUPS device-URI to use is: + serial:/dev/ttyS0?baud=11500. +

    parallel

    + This backend sends printfiles to printers connected to the + parallel port. An example for the CUPS device-URI to use is: + parallel:/dev/lp0. +

    scsi

    + This backend sends printfiles to printers attached to the + SCSI interface. An example for the CUPS device-URI to use is: + scsi:/dev/sr1. +

    lpd

    + This backend sends printfiles to LPR/LPD connected network + printers. An example for the CUPS device-URI to use is: + lpd://remote_host_name/remote_queue_name. +

    AppSocket/HP JetDirect

    + This backend sends printfiles to AppSocket (a.k.a. "HP + JetDirect") connected network printers. An example for the CUPS + device-URI to use is: + socket://10.11.12.13:9100. +

    ipp

    + This backend sends printfiles to IPP connected network + printers (or to other CUPS servers). Examples for CUPS device-URIs + to use are: + ipp:://192.193.194.195/ipp + (for many HP printers) or + ipp://remote_cups_server/printers/remote_printer_name. +

    http

    + This backend sends printfiles to HTTP connected printers. + (The http:// CUPS backend is only a symlink to the ipp:// backend.) + Examples for the CUPS device-URIs to use are: + http:://192.193.194.195:631/ipp + (for many HP printers) or + http://remote_cups_server:631/printers/remote_printer_name. +

    smb

    + This backend sends printfiles to printers shared by a Windows + host. An example for CUPS device-URIs that may be used includes: +

    +

    smb://workgroup/server/printersharename
    smb://server/printersharename
    smb://username:password@workgroup/server/printersharename
    smb://username:password@server/printersharename

    +

    + The smb:// backend is a symlink to the Samba utility + smbspool (does not ship with CUPS). If the + symlink is not present in your CUPS backend directory, have your + root user create it: ln -s `which smbspool' + /usr/lib/cups/backend/smb. +

    +It is easy to write your own backends as shell or Perl scripts, if you need any modification or extension to the CUPS print system. One -reason could be that you want to create "special" printers which send -the printjobs as email (through a "mailto:/" backend), convert them to -PDF (through a "pdfgen:/" backend) or dump them to "/dev/null" (In +reason could be that you want to create “special” printers that send +the printjobs as email (through a “mailto:/” backend), convert them to +PDF (through a “pdfgen:/” backend) or dump them to “/dev/null”. (In fact I have the system-wide default printer set up to be connected to -a "devnull:/" backend: there are just too many people sending jobs -without specifying a printer, or scripts and programs which don't name +a devnull:/ backend: there are just too many people sending jobs +without specifying a printer, or scripts and programs which do not name a printer. The system-wide default deletes the job and sends a polite -mail back to the $USER asking him to always specify a correct -printername). +email back to the $USER asking him to always specify the correct +printer name.)

    Not all of the mentioned backends may be present on your system or usable (depending on your hardware configuration). One test for all @@ -8745,315 +8822,332 @@ utility. Used with the -v parameter, it lists all available backends:

     $ lpinfo -v
    -

    cupsomatic/Foomatic -- how do they fit into the Picture?

    -"cupsomatic" filters may be the most widely used on CUPS +

    The Role of cupsomatic/foomatic

    + + +cupsomatic filters may be the most widely used on CUPS installations. You must be clear about the fact that these were not -developed by the CUPS people. They are a "Third Party" add-on to +developed by the CUPS people. They are a third party add-on to CUPS. They utilize the traditional Ghostscript devices to render jobs for CUPS. When troubleshooting, you should know about the difference. Here the whole rendering process is done in one stage, -inside Ghostscript, using an appropriate "device" for the target -printer. cupsomatic uses PPDs which are generated from the "Foomatic" +inside Ghostscript, using an appropriate device for the target +printer. cupsomatic uses PPDs that are generated from the Foomatic Printer & Driver Database at Linuxprinting.org.

    You can recognize these PPDs from the line calling the -cupsomatic filter: -

    +cupsomatic filter:
    +
    +

      *cupsFilter: "application/vnd.cups-postscript  0  cupsomatic"
     

    -This line you may find amongst the first 40 or so lines of the PPD + +You may find this line among the first 40 or so lines of the PPD file. If you have such a PPD installed, the printer shows up in the -CUPS web interface with a foomatic namepart for -the driver description. cupsomatic is a Perl script that runs -Ghostscript, with all the complicated commandline options -auto-constructed from the selected PPD and commandline options give to +CUPS Web interface with a foomatic namepart for +the driver description. cupsomatic is a Perl script that runs +Ghostscript with all the complicated command line options +auto-constructed from the selected PPD and command line options give to the printjob. -

    -However, cupsomatic is now deprecated. Its PPDs (especially the first +

    + + However, cupsomatic is now deprecated. Its PPDs (especially the first generation of them, still in heavy use out there) are not meeting the Adobe specifications. You might also suffer difficulties when you try -to download them with "Point'n'Print" to Windows clients. A better, -and more powerful successor is now in a very stable Beta-version -available: it is called foomatic-rip. To use -foomatic-rip as a filter with CUPS, you need the new-type PPDs. These -have a similar, but different line: -

    +to download them with “Point'n'Print” to Windows clients. A better
    +and more powerful successor is now in a stable beta-version: it is called foomatic-rip. To use
    +foomatic-rip as a filter with CUPS, you need the new-type PPDs. These
    +have a similar but different line:
     
    +

      *cupsFilter: "application/vnd.cups-postscript  0  foomatic-rip"
    -
     

    + The PPD generating engine at Linuxprinting.org has been revamped. The new PPDs comply to the Adobe spec. On top, they also provide a new way to specify different quality levels (hi-res photo, normal -color, grayscale, draft...) with a single click (whereas before you -could have required 5 or more different selections (media type, -resolution, inktype, dithering algorithm...). There is support for +color, grayscale, and draft) with a single click, whereas before you +could have required five or more different selections (media type, +resolution, inktype and dithering algorithm). There is support for custom-size media built in. There is support to switch -print-options from page to page, in the middle of a job. And the -best thing is: the new foomatic-rip now works seamlessly with all -legacy spoolers too (like LPRng, BSD-LPD, PDQ, PPR etc.), providing -for them access to use PPDs for their printing! -

    The Complete Picture

    -If you want to see an overview over all the filters and how they +print-options from page to page in the middle of a job. And the +best thing is the new foomatic-rip now works seamlessly with all +legacy spoolers too (like LPRng, BSD-LPD, PDQ, PPR and so on), providing +for them access to use PPDs for their printing. +

    The Complete Picture

    +If you want to see an overview of all the filters and how they relate to each other, the complete picture of the puzzle is at the end of this document. -

    mime.convs

    +

    mime.convs

    CUPS auto-constructs all possible filtering chain paths for any given MIME type, and every printer installed. But how does it decide in -favor or against a specific alternative? (There may often be cases, +favor or against a specific alternative? (There may often be cases where there is a choice of two or more possible filtering chains for -the same target printer). Simple: you may have noticed the figures in -the 3rd column of the mime.convs file. They represent virtual costs +the same target printer.) Simple. You may have noticed the figures in +the third column of the mime.convs file. They represent virtual costs assigned to this filter. Every possible filtering chain will sum up to -a total "filter cost". CUPS decides for the most "inexpensive" route. +a total “filter cost.” CUPS decides for the most “inexpensive” route.

    Tip

    The setting of FilterLimit 1000 in cupsd.conf will not allow more filters to run concurrently than will consume a total of 1000 virtual filter -cost. This is a very efficient way to limit the load of any CUPS -server by setting an appropriate "FilterLimit" value. A FilterLimit of -200 allows roughly 1 job at a time, while a FilterLimit of 1000 allows -approximately 5 jobs maximum at a time. -

    "Raw" printing

    -You can tell CUPS to print (nearly) any file "raw". "Raw" means it -will not be filtered. CUPS will send the file to the printer "as is" +cost. This is an efficient way to limit the load of any CUPS +server by setting an appropriate “FilterLimit” value. A FilterLimit of +200 allows roughly one job at a time, while a FilterLimit of 1000 allows +approximately five jobs maximum at a time. +

    Raw” Printing

    + You can tell CUPS to print (nearly) any file “raw”. “Raw” means it + will not be filtered. CUPS will send the file to the printer “as is” without bothering if the printer is able to digest it. Users need to take care themselves that they send sensible data formats only. Raw -printing can happen on any queue if the "-o raw" option is specified +printing can happen on any queue if the “-o raw” option is specified on the command line. You can also set up raw-only queues by simply not associating any PPD with it. This command:

     $ lpadmin -P rawprinter -v socket://11.12.13.14:9100 -E
     

    -sets up a queue named "rawprinter", connected via the "socket" -protocol (a.k.a. "HP JetDirect") to the device at IP address + sets up a queue named “rawprinter”, connected via the “socket” + protocol (a.k.a. “HP JetDirect”) to the device at IP address 11.12.1.3.14, using port 9100. (If you had added a PPD with -P /path/to/PPD to this command line, you would -have installed a "normal" printqueue. +have installed a “normal” print queue.

    -CUPS will automatically treat each job sent to a queue as a "raw" one, -if it can't find a PPD associated with the queue. However, CUPS will +CUPS will automatically treat each job sent to a queue as a “raw” one, +if it can't find a PPD associated with the queue. However, CUPS will only send known MIME types (as defined in its own mime.types file) and refuse others. -

    "application/octet-stream" printing

    +

    application/octet-stream Printing

    Any MIME type with no rule in the /etc/cups/mime.types file is regarded as unknown -or application/octet-stream and will not be +or application/octet-stream and will not be sent. Because CUPS refuses to print unknown MIME types per default, -you will probably have experienced the fact that printjobs originating +you will probably have experienced the fact that print jobs originating from Windows clients were not printed. You may have found an error message in your CUPS logs like: -

    +

    Unable to convert file 0 to printable format for job -

    -To enable the printing of "application/octet-stream" files, edit +

    +To enable the printing of application/octet-stream files, edit these two files:

    • /etc/cups/mime.convs

    • /etc/cups/mime.types

    Both contain entries (at the end of the respective files) which must be uncommented to allow RAW mode operation for -application/octet-stream. In /etc/cups/mime.types +application/octet-stream. In /etc/cups/mime.types make sure this line is present: -

    - application/octet-stream
    +
    +
    +
    +

    +application/octet-stream
     

    + This line (with no specific auto-typing rule set) makes all files -not otherwise auto-typed a member of application/octet-stream. In +not otherwise auto-typed a member of application/octet-stream. In /etc/cups/mime.convs, have this line: -

    - application/octet-stream   application/vnd.cups-raw   0   -
    -

    + +

    +application/octet-stream   application/vnd.cups-raw   0   -
    +

    + + + This line tells CUPS to use the Null Filter -(denoted as "-", doing... nothing at all) on -application/octet-stream, and tag the result as -application/vnd.cups-raw. This last one is +(denoted as “-”, doing nothing at all) on +application/octet-stream, and tag the result as +application/vnd.cups-raw. This last one is always a green light to the CUPS scheduler to now hand the file over -to the "backend" connecting to the printer and sending it over. -

    Note

    Editing the mime.convs and the +to the backend connecting to the printer and sending it over. +

    Note

    Editing the mime.convs and the mime.types file does not -enforce "raw" printing, it only +enforceraw” printing, it only allows it.

    Background.  CUPS being a more security-aware printing system than traditional ones does not by default allow one to send deliberate (possibly binary) -data to printing devices. (This could be easily abused to launch a +data to printing devices. (This could be easily abused to launch a Denial of Service attack on your printer(s), causing at least the loss -of a lot of paper and ink...) "Unknown" data are regarded by CUPS +of a lot of paper and ink...) “Unknown” data are regarded by CUPS as MIME type application/octet-stream. While you -can send data "raw", the MIME type for these must +can send data “raw”, the MIME type for these must be one that is known to CUPS and an allowed one. The file -/etc/cups/mime.types defines the "rules" how CUPS +/etc/cups/mime.types defines the “rules” of how CUPS recognizes MIME types. The file /etc/cups/mime.convs decides which file conversion filter(s) may be applied to which MIME types. -

    PostScript Printer Descriptions (PPDs) for non-PS Printers

    +

    PostScript Printer Descriptions (PPDs) for Non-PS Printers

    + Originally PPDs were meant to be used for PostScript printers only. Here, they help to send device-specific commands and settings to the RIP which processes the jobfile. CUPS has extended this scope for PPDs to cover non-PostScript printers too. This was not -very difficult, because it is a standardized file format. In a way +difficult, because it is a standardized file format. In a way it was logical too: CUPS handles PostScript and uses a PostScript -RIP (=Ghostscript) to process the jobfiles. The only difference is: +RIP (Ghostscript) to process the jobfiles. The only difference is: a PostScript printer has the RIP built-in, for other types of printers the Ghostscript RIP runs on the host computer.

    PPDs for a non-PS printer have a few lines that are unique to CUPS. The most important one looks similar to this: -

    +
    +
    +
    +

      *cupsFilter: application/vnd.cups-raster  66   rastertoprinter
     

    + It is the last piece in the CUPS filtering puzzle. This line tells the -CUPS daemon to use as a last filter "rastertoprinter". This filter -should be served as input an "application/vnd.cups-raster" MIME type -file. Therefore CUPS should auto-construct a filtering chain, which +CUPS daemon to use as a last filter rastertoprinter. This filter +should be served as input an application/vnd.cups-raster MIME type +file. Therefore, CUPS should auto-construct a filtering chain, which delivers as its last output the specified MIME type. This is then -taken as input to the specified "rastertoprinter" filter. After this -the last filter has done its work ("rastertoprinter" is a Gimp-Print +taken as input to the specified rastertoprinter filter. After this +the last filter has done its work (rastertoprinter is a Gimp-Print filter), the file should go to the backend, which sends it to the output device.

    CUPS by default ships only a few generic PPDs, but they are good for several hundred printer models. You may not be able to control different paper trays, or you may get larger margins than your -specific model supports): -

    Table 19.1. PPD's shipped with CUPS

    PPD filePrinter type
    deskjet.ppdolder HP inkjet printers and compatible
    deskjet2.ppdnewer HP inkjet printers and compatible
    dymo.ppdlabel printers
    epson9.ppdEpson 24pin impact printers and compatible
    epson24.ppdEpson 24pin impact printers and compatible
    okidata9.ppdOkidata 9pin impact printers and compatible
    okidat24.ppdOkidata 24pin impact printers and compatible
    stcolor.ppdolder Epson Stylus Color printers
    stcolor2.ppdnewer Epson Stylus Color printers
    stphoto.ppdolder Epson Stylus Photo printers
    stphoto2.ppdnewer Epson Stylus Photo printers
    laserjet.ppdall PCL printers. Further below is a discussion of several other driver/PPD-packages suitable for use with CUPS.

    Difference between cupsomatic/foomatic-rip and -native CUPS printing

    -Native CUPS rasterization works in two steps. +specific model supports. See for summary information. +

    Table 19.1. PPDs shipped with CUPS

    PPD filePrinter type
    deskjet.ppdolder HP inkjet printers and compatible
    deskjet2.ppdnewer HP inkjet printers and compatible
    dymo.ppdlabel printers
    epson9.ppdEpson 24pin impact printers and compatible
    epson24.ppdEpson 24pin impact printers and compatible
    okidata9.ppdOkidata 9pin impact printers and compatible
    okidat24.ppdOkidata 24pin impact printers and compatible
    stcolor.ppdolder Epson Stylus Color printers
    stcolor2.ppdnewer Epson Stylus Color printers
    stphoto.ppdolder Epson Stylus Photo printers
    stphoto2.ppdnewer Epson Stylus Photo printers
    laserjet.ppdall PCL printers. Further below is a discussion + of several other driver/PPD-packages suitable for use with CUPS.

    cupsomatic/foomatic-rip Versus native CUPS Printing

    + + +Native CUPS rasterization works in two steps:

    • -First is the "pstoraster" step. It uses the special "cups" - -device from ESP Ghostscript 7.05.x as its tool +First is the pstoraster step. It uses the special CUPS + +device from ESP Ghostscript 7.05.x as its tool.

    • -Second comes the "rasterdriver" step. It uses various +Second comes the rasterdriver step. It uses various device-specific filters; there are several vendors who provide good -quality filters for this step, some are Free Software, some are -Shareware/Non-Free, some are proprietary.

    +quality filters for this step. Some are free software, some are +shareware/non-free and some are proprietary.

    Often this produces better quality (and has several more advantages) than other methods.

    -

    Figure 19.10. cupsomatic/foomatic processing versus Native CUPS

    cupsomatic/foomatic processing versus Native CUPS

    +

    Figure 19.10. cupsomatic/foomatic Processing versus Native CUPS.

    cupsomatic/foomatic Processing versus Native CUPS.

    -One other method is the cupsomatic/foomatic-rip -way. Note that cupsomatic is not made by the CUPS +One other method is the cupsomatic/foomatic-rip +way. Note that cupsomatic is not made by the CUPS developers. It is an independent contribution to printing development, -made by people from Linuxprinting.org (see also http://www.cups.org/cups-help.html). -cupsomatic is no longer developed and maintained and is no longer +made by people from Linuxprinting.org [4]. +cupsomatic is no longer developed and maintained and is no longer supported. It has now been replaced by -foomatic-rip. foomatic-rip is a complete re-write -of the old cupsomatic idea, but very much improved and generalized to +foomatic-rip. foomatic-rip is a complete re-write +of the old cupsomatic idea, but very much improved and generalized to other (non-CUPS) spoolers. An upgrade to foomatic-rip is strongly -advised, especially if you are upgrading to a recent version of CUPS +advised, especially if you are upgrading to a recent version of CUPS, too.

    - - -Both the cupsomatic (old) and the foomatic-rip (new) methods from + + +Both the cupsomatic (old) and the foomatic-rip (new) methods from Linuxprinting.org use the traditional Ghostscript print file processing, doing everything in a single step. It therefore relies on -all the other devices built-in into Ghostscript. The quality is as +all the other devices built into Ghostscript. The quality is as good (or bad) as Ghostscript rendering is in other spoolers. The advantage is that this method supports many printer models not supported (yet) by the more modern CUPS method.

    Of course, you can use both methods side by side on one system (and -even for one printer, if you set up different queues), and find out +even for one printer, if you set up different queues) and find out which works best for you.

    -cupsomatic "kidnaps" the printfile after the -application/vnd.cups-postscript stage and -deviates it through the CUPS-external, system wide Ghostscript -installation: Therefore the printfile bypasses the "pstoraster" filter -(and thus also bypasses the CUPS-raster-drivers -"rastertosomething"). After Ghostscript finished its rasterization, -cupsomatic hands the rendered file directly to the CUPS backend. The -flowchart above illustrates the difference between native CUPS -rendering and the Foomatic/cupsomatic method. -

    Examples for filtering Chains

    +cupsomatic kidnaps the printfile after the +application/vnd.cups-postscript stage and +deviates it through the CUPS-external, system-wide Ghostscript +installation. Therefore the printfile bypasses the pstoraster filter +(and also bypasses the CUPS-raster-drivers +rastertosomething). After Ghostscript finished its rasterization, +cupsomatic hands the rendered file directly to the CUPS backend. The +flowchart in illustrates the difference between native CUPS +rendering and the Foomatic/cupsomatic method. +

    Examples for Filtering Chains

    Here are a few examples of commonly occurring filtering chains to illustrate the workings of CUPS.

    -Assume you want to print a PDF file to a HP JetDirect-connected +Assume you want to print a PDF file to an HP JetDirect-connected PostScript printer, but you want to print the pages 3-5, 7, 11-13 -only, and you want to print them "2-up" and "duplex": -

    • your print options (page selection as required, 2-up, -duplex) are passed to CUPS on the commandline;

    • the (complete) PDF file is sent to CUPS and autotyped as -application/pdf;

    • the file therefore first must pass the -pdftops pre-filter, which produces PostScript -MIME type application/postscript (a preview here -would still show all pages of the original PDF);

    • the file then passes the pstops -filter which applies the commandline options: it selects the pages -2-5, 7 and 11-13, creates and imposed layout "2 pages on 1 sheet" and -inserts the correct "duplex" command (as is defined in the printer's -PPD) into the new PostScript file; the file now is of PostScript MIME +only, and you want to print them “two-up” and “duplex”: +

      • Your print options (page selection as required, two-up, +duplex) are passed to CUPS on the command line.

      • The (complete) PDF file is sent to CUPS and autotyped as +application/pdf.

      • The file therefore must first pass the +pdftops pre-filter, which produces PostScript +MIME type application/postscript (a preview here +would still show all pages of the original PDF).

      • The file then passes the pstops +filter that applies the command line options: it selects the pages +2-5, 7 and 11-13, creates an imposed layout “2 pages on 1 sheet” and +inserts the correct “duplex” command (as defined in the printer's +PPD) into the new PostScript file; the file is now of PostScript MIME type -application/vnd.cups-postscript;

      • the file goes to the socket +application/vnd.cups-postscript.

      • The file goes to the socket backend, which transfers the job to the printers.

      - The resulting filter chain therefore is as drawn in the image below. -

      Figure 19.11. PDF to socket chain

      PDF to socket chain

      + The resulting filter chain, therefore, is as drawn in . +

      Figure 19.11. PDF to socket chain.

      PDF to socket chain.

      Assume your want to print the same filter to an USB-connected -Epson Stylus Photo printer, installed with the CUPS +Epson Stylus Photo printer installed with the CUPS stphoto2.ppd. The first few filtering stages are nearly the same: -

      • your print options (page selection as required, 2-up, -duplex) are passed to CUPS on the commandline;

      • the (complete) PDF file is sent to CUPS and autotyped as -application/pdf;

      • the file therefore first must pass the -pdftops pre-filter, which produces PostScript -MIME type application/postscript (a preview here -would still show all pages of the original PDF);

      • the file then passes the "pstops" filter which applies +

        • Your print options (page selection as required, two-up, +duplex) are passed to CUPS on the commandline.

        • The (complete) PDF file is sent to CUPS and autotyped as +application/pdf.

        • The file must first pass the +pdftops pre-filter, which produces PostScript +MIME type application/postscript (a preview here +would still show all pages of the original PDF).

        • The file then passes the “pstops” filter that applies the commandline options: it selects the pages 2-5, 7 and 11-13, -creates and imposed layout "2 pages on 1 sheet" and inserts the -correct "duplex" command... (OOoops -- this printer and his PPD -don't support duplex printing at all -- this option will be ignored -then) into the new PostScript file; the file now is of PostScript +creates an imposed layout “two pages on one sheet” and inserts the +correct “duplex” command... (Oops this printer and PPD +do not support duplex printing at all so this option will +be ignored) into the new PostScript file; the file is now of PostScript MIME type -application/vnd.cups-postscript;

        • the file then passes the -pstoraster stage and becomes MIME type -application/cups-raster;

        • finally, the rastertoepson filter -does its work (as is indicated in the printer's PPD), creating the -printer-specific raster data and embedding any user-selected -print-options into the print data stream;

        • the file goes to the usb backend, +application/vnd.cups-postscript.

        • The file then passes the + +pstoraster stage and becomes MIME type +application/ +cups-raster.

        • Finally, the rastertoepson filter +does its work (as indicated in the printer's PPD), creating the +rinter-specific raster data and embedding any user-selected +print-options into the print data stream.

        • The file goes to the usb backend, which transfers the job to the printers.

        - The resulting filter chain therefore is as drawn in the image below. -

        Figure 19.12. PDF to USB chain

        PDF to USB chain

      Sources of CUPS drivers / PPDs

      -On the internet you can find now many thousand CUPS-PPD files -(with their companion filters), in many national languages, -supporting more than 1000 non-PostScript models. -

      • ESP -PrintPro (commercial, -non-Free) is packaged with more than 3000 PPDs, ready for -successful use "out of the box" on Linux, Mac OS X, IBM-AIX, -HP-UX, Sun-Solaris, SGI-IRIX, Compaq Tru64, Digital UNIX and some + The resulting filter chain therefore is as drawn in . +

        Figure 19.12. PDF to USB chain.

        PDF to USB chain.

      Sources of CUPS Drivers/PPDs

      +On the Internet you can now find many thousands of CUPS-PPD files +(with their companion filters), in many national languages +supporting more than thousand non-PostScript models. +

      • ESP +PrintPro (commercial, +non-free) is packaged with more than three thousand PPDs, ready for +successful use “out of the box” on Linux, Mac OS X, IBM-AIX, +HP-UX, Sun-Solaris, SGI-IRIX, Compaq Tru64, Digital UNIX, and some more commercial Unices (it is written by the CUPS developers themselves and its sales help finance the further development of -CUPS, as they feed their creators).

      • the Gimp-Print-Project - (GPL, Free Software) +CUPS, as they feed their creators).

      • The Gimp-Print-Project + (GPL, free software) provides around 140 PPDs (supporting nearly 400 printers, many driven to photo quality output), to be used alongside the Gimp-Print CUPS -filters;

      • TurboPrint - (Shareware, non-Free) supports +filters.

      • TurboPrint + (shareware, non-free) supports roughly the same amount of printers in excellent -quality;

      • OMNI - -(LPGL, Free) is a package made by IBM, now containing support for more +quality.

      • OMNI + +(LPGL, free) is a package made by IBM, now containing support for more than 400 printers, stemming from the inheritance of IBM OS/2 Know-How -ported over to Linux (CUPS support is in a Beta-stage at -present);

      • HPIJS - (BSD-style licenses, Free) +ported over to Linux (CUPS support is in a beta-stage at +present).

      • HPIJS + (BSD-style licenses, free) supports around 150 of HP's own printers and is also providing excellent print quality now (currently available only via the Foomatic -path);

      • Foomatic/cupsomatic - (LPGL, Free) from +path).

      • Foomatic/cupsomatic + (LPGL, free) from Linuxprinting.org are providing PPDs for practically every Ghostscript filter known to the world (including Omni, Gimp-Print and -HPIJS).

      Note

      -The cupsomatic/Foomatic trick from Linuxprinting.org works -differently from the other drivers. This is explained elsewhere in this -document. -

      Printing with Interface Scripts

      -CUPS also supports the usage of "interface scripts" as known from +HPIJS).

    Printing with Interface Scripts

    +CUPS also supports the usage of “interface scripts” as known from System V AT&T printing systems. These are often used for PCL -printers, from applications that generate PCL print jobs. Interface +printers, from applications that generate PCL print jobs. Interface scripts are specific to printer models. They have a similar role as PPDs for PostScript printers. Interface scripts may inject the Escape sequences as required into the print data stream, if the user has @@ -9066,126 +9160,138 @@ the -i option: root# lpadmin -p pclprinter -v socket://11.12.13.14:9100 \ -i /path/to/interface-script

    -Interface scripts might be the "unknown animal" to many. However, -with CUPS they provide the most easy way to plug in your own +Interface scripts might be the “unknown animal” to many. However, +with CUPS they provide the easiest way to plug in your own custom-written filtering script or program into one specific print queue (some information about the traditional usage of interface scripts is -to be found at http://playground.sun.com/printing/documentation/interface.html). -

    Network printing (purely Windows)

    +to be found at http://playground.sun.com/printing/documentation/interface.html). +

    Network Printing (Purely Windows)

    Network printing covers a lot of ground. To understand what exactly goes on with Samba when it is printing on behalf of its Windows -clients, let's first look at a "purely Windows" setup: Windows clients +clients, let's first look at a “purely Windows” setup: Windows clients with a Windows NT print server. -

    From Windows Clients to an NT Print Server

    +

    From Windows Clients to an NT Print Server

    Windows clients printing to an NT-based print server have two -options. They may -

    • execute the driver locally and render the GDI output -(EMF) into the printer specific format on their own, -or

    • send the GDI output (EMF) to the server, where the +options. They may: + + +

      • Execute the driver locally and render the GDI output + (EMF) into the printer-specific format on their own. +

      • Send the GDI output (EMF) to the server, where the driver is executed to render the printer specific output.

      -Both print paths are shown in the flowcharts below. -

    Driver Execution on the Client

    -In the first case the print server must spool the file as "raw", + Both print paths are shown in the flowcharts in the figures below. +

    Driver Execution on the Client

    +In the first case the print server must spool the file as raw, meaning it shouldn't touch the jobfile and try to convert it in any -way. This is what traditional UNIX-based print server can do too; and -at a better performance and more reliably than NT print server. This +way. This is what a traditional UNIX-based print server can do too, and +at a better performance and more reliably than an NT print server. This is what most Samba administrators probably are familiar with. One -advantage of this setup is that this "spooling-only" print server may +advantage of this setup is that this “spooling-only” print server may be used even if no driver(s) for UNIX are available it is sufficient -to have the Windows client drivers available and installed on the +to have the Windows client drivers available; and installed on the clients.

    -

    Figure 19.13. Print Driver execution on the Client

    Print Driver execution on the Client

    -

    Driver Execution on the Server

    -The other path executes the printer driver on the server. The clients +

    Figure 19.13. Print driver execution on the client.

    Print driver execution on the client.

    +

    Driver Execution on the Server

    + + + + + +The other path executes the printer driver on the server. The client transfers print files in EMF format to the server. The server uses the PostScript, PCL, ESC/P or other driver to convert the EMF file into the printer-specific language. It is not possible for UNIX to do the -same. Currently there is no program or method to convert a Windows +same. Currently, there is no program or method to convert a Windows client's GDI output on a UNIX server into something a printer could understand.

    -

    Figure 19.14. Print Driver execution on the Server

    Print Driver execution on the Server

    +

    Figure 19.14. Print driver execution on the server.

    Print driver execution on the server.

    -However, there is something similar possible with CUPS. Read on... -

    Network Printing (Windows clients -- UNIX/Samba Print +However, there is something similar possible with CUPS. Read on. +

    Network Printing (Windows Clients UNIX/Samba Print Servers)

    Since UNIX print servers cannot execute the Win32 program code on their platform, the picture is somewhat -different. However, this doesn't limit your options all that -much. In the contrary, you may have a way here to implement printing -features which are not possible otherwise. -

    From Windows Clients to a CUPS/Samba Print Server

    -Here is a simple recipe showing how you can take advantage of CUPS +different. However, this does not limit your options all that +much. On the contrary, you may have a way here to implement printing +features that are not possible otherwise. +

    From Windows Clients to a CUPS/Samba Print Server

    +Here is a simple recipe showing how you can take advantage of CUPS' powerful features for the benefit of your Windows network printing clients:

    • Let the Windows clients send PostScript to the CUPS -server.

    • Let the CUPS server render the PostScript into device -specific raster format.

    +server.

  • Let the CUPS server render the PostScript into device-specific raster format.

  • This requires the clients to use a PostScript driver (even if the printer is a non-PostScript model. It also requires that you have a -"driver" on the CUPS server. +driver on the CUPS server.

    -Firstly, to enable CUPS based printing through Samba the +First, to enable CUPS-based rinting through Samba the following options should be set in your smb.conf file [global] section: -

    • printing = cups

    • printcap = cups

    +

    printing = cups
    printcap = cups

    When these parameters are specified, all manually set print directives -(like print command, or lppause command) in smb.conf (as well as -in samba itself) will be ignored. Instead, Samba will directly -interface with CUPS through it's application program interface (API) - +(like print command, or lppause command) in smb.conf (as well as +in Samba itself) will be ignored. Instead, Samba will directly +interface with CUPS through its application program interface (API), as long as Samba has been compiled with CUPS library (libcups) -support. If Samba has NOT been compiled with CUPS support, and if no +support. If Samba has not been compiled with CUPS support, and if no other print commands are set up, then printing will use the System V AT&T command set, with the -oraw option automatically passing through (if you want your own defined print commands to work with a Samba that has CUPS support compiled in, -simply use printing = sysv). +simply use printing = sysv).

    -

    Figure 19.15. Printing via CUPS/samba server

    Printing via CUPS/samba server

    -

    Samba receiving Jobfiles and passing them to CUPS

    +

    Figure 19.15. Printing via CUPS/Samba server.

    Printing via CUPS/Samba server.

    +

    Samba Receiving Jobfiles and Passing Them to CUPS

    Samba must use its own spool directory (it is set -by a line similar to path = /var/spool/samba, +by a line similar to path = /var/spool/samba, in the [printers] or [printername] section of smb.conf). Samba receives the job in its own spool space and passes it into the spool directory of CUPS (the CUPS spooling directory is set by the RequestRoot directive, in a line that defaults to RequestRoot -/var/spool/cups). CUPS checks the access rights of its -spool dir and resets it to healthy values with every re-start. We have -seen quite some people who had used a common spooling space for Samba -and CUPS, and were struggling for weeks with this "problem". +/var/spool/cups). CUPS checks the access rights of its +spool dir and resets it to healthy values with every restart. We have +seen quite a few people who had used a common spooling space for Samba +and CUPS, and were struggling for weeks with this “problem.

    A Windows user authenticates only to Samba (by whatever means is configured). If Samba runs on the same host as CUPS, you only need to -allow "localhost" to print. If they run on different machines, you +allow “localhost” to print. If they run on different machines, you need to make sure the Samba host gets access to printing on CUPS. -

    Network PostScript RIP: CUPS Filters on Server -- clients use -PostScript Driver with CUPS-PPDs

    +

    Network PostScript RIP

    +This section discusses the use of CUPS filters on the server configuration where +clients make use of a PostScript driver with CUPS-PPDs. +

    + + + PPDs can control all print device options. They are usually provided -by the manufacturer; if you own a PostScript printer, that is. PPD +by the manufacturer, if you own a PostScript printer, that is. PPD files (PostScript Printer Descriptions) are always a component of PostScript printer drivers on MS Windows or Apple Mac OS systems. They are ASCII files containing user-selectable print options, mapped to appropriate PostScript, PCL or PJL commands for the target printer. Printer driver GUI dialogs translate these options -"on-the-fly" into buttons and drop-down lists for the user to select. +“on-the-fly” into buttons and drop-down lists for the user to select.

    CUPS can load, without any conversions, the PPD file from any Windows (NT is recommended) PostScript driver and handle the options. There is -a web browser interface to the print options (select http://localhost:631/printers/ -and click on one Configure Printer button to see -it), or a commandline interface (see man lpoptions -or see if you have lphelp on your system). There are also some +a Web browser interface to the print options (select http://localhost:631/printers/ +and click on one Configure Printer button to see +it), or a command line interface (see man lpoptions +or see if you have lphelp on your system). There are also some different GUI frontends on Linux/UNIX, which can present PPD options to users. PPD options are normally meant to be evaluated by the PostScript RIP on the real PostScript printer. -

    PPDs for non-PS Printers on UNIX

    -CUPS doesn't limit itself to "real" PostScript printers in its usage +

    PPDs for Non-PS Printers on UNIX

    + +CUPS does not limit itself to “real” PostScript printers in its usage of PPDs. The CUPS developers have extended the scope of the PPD -concept, to also describe available device and driver options for +concept to also describe available device and driver options for non-PostScript printers through CUPS-PPDs.

    This is logical, as CUPS includes a fully featured PostScript @@ -9193,104 +9299,109 @@ interpreter (RIP). This RIP is based on Ghostscript. It can process all received PostScript (and additionally many other file formats) from clients. All CUPS-PPDs geared to non-PostScript printers contain an additional line, starting with the keyword -*cupsFilter . This line tells the CUPS print +*cupsFilter. This line tells the CUPS print system which printer-specific filter to use for the interpretation of the supplied PostScript. Thus CUPS lets all its printers appear as PostScript devices to its clients, because it can act as a PostScript RIP for those printers, processing the received PostScript code into a proper raster print format. -

    PPDs for non-PS Printers on Windows

    +

    PPDs for Non-PS Printers on Windows

    + CUPS-PPDs can also be used on Windows-Clients, on top of a -"core" PostScript driver (now recommended is the "CUPS PostScript -Driver for WindowsNT/2K/XP"; you can also use the Adobe one, with +“core” PostScript driver (now recommended is the "CUPS PostScript +Driver for WindowsNT/200x/XP"; you can also use the Adobe one, with limitations). This feature enables CUPS to do a few tricks no other spooler can do: -

    • act as a networked PostScript RIP (Raster Image +

      • Act as a networked PostScript RIP (Raster Image Processor), handling printfiles from all client platforms in a uniform -way;

      • act as a central accounting and billing server, since -all files are passed through the pstops filter and are therefore +way.

      • Act as a central accounting and billing server, since +all files are passed through the pstops filter and are, therefore, logged in the CUPS page_log file. -NOTE: this can not happen with "raw" print jobs, -which always remain unfiltered per definition;

      • enable clients to consolidate on a single PostScript +Note: this cannot happen with “raw” print jobs, +which always remain unfiltered per definition.

      • Enable clients to consolidate on a single PostScript driver, even for many different target printers.

      Using CUPS PPDs on Windows clients enables these to control -all print job settings just as a UNIX client can do too. -

    Windows Terminal Servers (WTS) as CUPS Clients

    +all print job settings just as a UNIX client can do. +

    Windows Terminal Servers (WTS) as CUPS Clients

    This setup may be of special interest to people experiencing major -problems in WTS environments. WTS need often a multitude of +problems in WTS environments. WTS often need a multitude of non-PostScript drivers installed to run their clients' variety of different printer models. This often imposes the price of much increased instability. -

    Printer Drivers running in "Kernel Mode" cause many +

    Printer Drivers Running in “Kernel Mode” Cause Many Problems

    -The reason is that in Win NT printer drivers run in "Kernel -Mode", this introduces a high risk for the stability of the system + In Windows NT printer drivers which run in “Kernel +Mode”, introduces a high risk for the stability of the system if the driver is not really stable and well-tested. And there are a lot of bad drivers out there! Especially notorious is the example of the PCL printer driver that had an additional sound module running, to notify users via soundcard of their finished jobs. Do I -need to say that this one was also reliably causing "Blue Screens -of Death" on a regular basis? +need to say that this one was also reliably causing “blue screens +of death” on a regular basis?

    -PostScript drivers generally are very well tested. They are not known -to cause any problems, even though they run in Kernel Mode too. This -might be because there have so far only been 2 different PostScript +PostScript drivers are generally well tested. They are not known +to cause any problems, even though they also run in kernel mode. This +might be because there have been so far only two different PostScript drivers: the ones from Adobe and the one from Microsoft. Both are -very well tested and are as stable as you ever can imagine on +well tested and are as stable as you can imagine on Windows. The CUPS driver is derived from the Microsoft one. -

    Workarounds impose Heavy Limitations

    +

    Workarounds Impose Heavy Limitations

    In many cases, in an attempt to work around this problem, site -administrators have resorted to restrict the allowed drivers installed -on their WTS to one generic PCL- and one PostScript driver. This -however restricts the clients in the amount of printer options -available for them; often they can't get out more than simplex +administrators have resorted to restricting the allowed drivers installed +on their WTS to one generic PCL and one PostScript driver. This, +however, restricts the clients in the number of printer options +available for them. Often they can't get out more than simplex prints from one standard paper tray, while their devices could do much -better, if driven by a different driver! ) -

    CUPS: a "Magical Stone"?

    +better, if driven by a different driver! +

    CUPS: A “Magical Stone”?

    + + Using a PostScript driver, enabled with a CUPS-PPD, seems to be a very elegant way to overcome all these shortcomings. There are, depending -on the version of Windows OS you use, up to 3 different PostScript +on the version of Windows OS you use, up to three different PostScript drivers available: Adobe, Microsoft and CUPS PostScript drivers. None of them is known to cause major stability problems on WTS (even if used with many different PPDs). The clients will be able to (again) chose paper trays, duplex printing and other settings. However, there is a certain price for this too: a CUPS server acting as a PostScript RIP for its clients requires more CPU and RAM than when just acting as -a "raw spooling" device. Plus, this setup is not yet widely tested, +a “raw spooling” device. Plus, this setup is not yet widely tested, although the first feedbacks look very promising. -

    PostScript Drivers with no major problems -- even in Kernel -Mode

    -More recent printer drivers on W2K and XP don't run in Kernel mode -(unlike Win NT) any more. However, both operating systems can still -use the NT drivers, running in Kernel mode (you can roughly tell which -is which as the drivers in subdirectory "2" of "W32X86" are "old" -ones). As was said before, the Adobe as well as the Microsoft +

    PostScript Drivers with No Major Problems Even in Kernel +Mode

    + +More recent printer drivers on W200x and XP no longer run in kernel mode +(unlike Windows NT). However, both operating systems can still +use the NT drivers, running in kernel mode (you can roughly tell which +is which as the drivers in subdirectory “2” of “W32X86” are “old” +ones). As was said before, the Adobe as well as the Microsoft PostScript drivers are not known to cause any stability problems. The CUPS driver is derived from the Microsoft one. There is a simple -reason for this: The MS DDK (Device Development Kit) for Win NT (which +reason for this: The MS DDK (Device Development Kit) for Windows NT (which used to be available at no cost to licensees of Visual Studio) includes the source code of the Microsoft driver, and licensees of Visual Studio are allowed to use and modify it for their own driver development efforts. This is what the CUPS people have done. The -license doesn't allow them to publish the whole of the source code. -However, they have released the "diff" under the GPL, and if you are -owner of an "MS DDK for Win NT", you can check the driver yourself. -

    Setting up CUPS for driver Download

    -As we have said before: all previously known methods to prepare client -printer drivers on the Samba server for download and "Point'n'Print" -convenience of Windows workstations are working with CUPS too. These +license does not allow them to publish the whole of the source code. +However, they have released the “diff” under the GPL, and if you are +the owner of an “MS DDK for Windows NT,” you can check the driver yourself. +

    Configuring CUPS for Driver Download

    +As we have said before, all previously known methods to prepare client +printer drivers on the Samba server for download and Point'n'Print +convenience of Windows workstations are working with CUPS, too. These methods were described in the previous chapter. In reality, this is a -pure Samba business, and only relates to the Samba/Win client +pure Samba business and only relates to the Samba/Windows client relationship. -

    cupsaddsmb: the unknown Utility

    -The cupsaddsmb utility (shipped with all current CUPS versions) is an -alternative method to transfer printer drivers into the Samba +

    cupsaddsmb: The Unknown Utility

    + +The cupsaddsmb utility (shipped with all current CUPS versions) is an +alternate method to transfer printer drivers into the Samba [print$] share. Remember, this share is where clients expect drivers deposited and setup for download and -installation. It makes the sharing of any (or all) installed CUPS -printers very easy. cupsaddsmb can use the Adobe PostScript driver as -well as the newly developed CUPS PostScript Driver for -WinNT/2K/XP. Note, that cupsaddsmb does +installation. It makes the sharing of any (or all) installed CUPS +printers quite easy. cupsaddsmb can use the Adobe PostScript driver as +well as the newly developed CUPS PostScript Driver for +Windows NT/200x/XP. cupsaddsmb does not work with arbitrary vendor printer drivers, but only with the exact driver files that are named in its man page. @@ -9299,23 +9410,24 @@ The CUPS printer driver is available from the CUPS download site. Its package name is cups-samba-[version].tar.gz . It is preferred over the Adobe drivers since it has a number of advantages: -

    • it supports a much more accurate page -accounting;

    • it supports banner pages, and page labels on all -printers;

    • it supports the setting of a number of job IPP +

      • It supports a much more accurate page +accounting.

      • It supports banner pages, and page labels on all +printers.

      • It supports the setting of a number of job IPP attributes (such as job-priority, page-label and -job-billing)

      -However, currently only Windows NT, 2000, and XP are supported by the -CUPS drivers. You will need to get the respective part of Adobe driver -too if you need to support Windows 95, 98, and ME clients. -

    Prepare your smb.conf for cupsaddsmb

    -Prior to running cupsaddsmb, you need the following settings in -smb.conf: -

    Example 19.3. smb.conf for cupsaddsmb usage

    [global]
    load printers = yes
    printing = cups
    printcap name = cups
    [printers]
    comment = All Printers
    path = /var/spool/samba
    browseable = no
    public = yes
    # setting depends on your requirements
    guest ok = yes
    writable = no
    printable = yes
    printer admin = root
    [print$]
    comment = Printer Drivers
    path = /etc/samba/drivers
    browseable = yes
    guest ok = no
    read only = yes
    write list = root

    CUPS Package of "PostScript Driver for WinNT/2k/XP"

    -CUPS users may get the exactly same packages from http://www.cups.org/software.html. +job-billing).

    +However, currently only Windows NT, 2000 and XP are supported by the +CUPS drivers. You will also need to get the respective part of Adobe driver +if you need to support Windows 95, 98 and ME clients. +

    Prepare Your smb.conf for cupsaddsmb

    +Prior to running cupsaddsmb, you need the settings in +smb.conf as shown in : +

    Example 19.3. smb.conf for cupsaddsmb usage

    [global]
    load printers = yes
    printing = cups
    printcap name = cups
    [printers]
    comment = All Printers
    path = /var/spool/samba
    browseable = no
    public = yes
    # setting depends on your requirements
    guest ok = yes
    writable = no
    printable = yes
    printer admin = root
    [print$]
    comment = Printer Drivers
    path = /etc/samba/drivers
    browseable = yes
    guest ok = no
    read only = yes
    write list = root

    CUPS “PostScript Driver for Windows NT/200x/XP

    + +CUPS users may get the exact same packages from http://www.cups.org/software.html. It is a separate package from the CUPS base software files, tagged as -CUPS 1.1.x Windows NT/2k/XP Printer Driver for Samba -(tar.gz, 192k). The filename to download is -cups-samba-1.1.x.tar.gz. Upon untar-/unzip-ing, +CUPS 1.1.x Windows NT/200x/XP Printer Driver for Samba +(tar.gz, 192k). The filename to download is +cups-samba-1.1.x.tar.gz. Upon untar and unzipping, it will reveal these files:

     root# tar xvzf cups-samba-1.1.19.tar.gz
    @@ -9325,15 +9437,15 @@ cups-samba.readme
     cups-samba.remove
     cups-samba.ss
     

    - - + + These have been packaged with the ESP meta packager software -"EPM". The *.install and +EPM. The *.install and *.remove files are simple shell scripts, which untars the *.ss (the *.ss is -nothing else but a tar-archive, which can be untar-ed by "tar" +nothing else but a tar-archive, which can be untarred by “tar” too). Then it puts the content into -/usr/share/cups/drivers/. This content includes 3 +/usr/share/cups/drivers/. This content includes three files:

     root# tar tv cups-samba.ss
    @@ -9341,7 +9453,7 @@ cupsdrvr.dll
     cupsui.dll
     cups.hlp  
     

    -The cups-samba.install shell scripts is easy to +The cups-samba.install shell scripts are easy to handle:

     root# ./cups-samba.install
    @@ -9349,7 +9461,7 @@ handle:
     Installing software...
     Updating file permissions...
     Running post-install commands...
    -Installation is complete.        
    +Installation is complete.       
     

    The script should automatically put the driver files into the /usr/share/cups/drivers/ directory. @@ -9360,206 +9472,210 @@ into/usr/share/drivers/ instead of /usr/share/cups/drivers/. To work around this, copy/move the file (after running the ./cups-samba.install script) manually to the -right place. +correct place.

     root# cp /usr/share/drivers/cups.hlp /usr/share/cups/drivers/
    -

    +

    + This new CUPS PostScript driver is currently binary-only, but free of -charge. No complete source code is provided (yet). The reason is this: -it has been developed with the help of the Microsoft Driver -Developer Kit (DDK) and compiled with Microsoft Visual +charge. No complete source code is provided (yet). The reason is that +it has been developed with the help of the Microsoft Driver +Developer Kit (DDK) and compiled with Microsoft Visual Studio 6. Driver developers are not allowed to distribute the whole of -the source code as Free Software. However, CUPS developers released -the "diff" in source code under the GPL, so anybody with a license of +the source code as free software. However, CUPS developers released +the “diff” in source code under the GPL, so anybody with a license of Visual Studio and a DDK will be able to compile for him/herself. -

    Recognize the different Driver Files

    -The CUPS drivers don't support the "older" Windows 95/98/ME, but only -the Windows NT/2000/XP client: -

    Windows NT, 2000, and XP are supported by:

    -

    • cups.hlp

    • cupsdrvr.dll

    • cupsui.dll

    -

    -Adobe drivers are available for the older Windows 95/98/ME as well as -the Windows NT/2000/XP clients. The set of files is different for the +

    Recognizing Different Driver Files

    +The CUPS drivers do not support the older Windows 95/98/Me, but only +the Windows NT/2000/XP client. +

    Windows NT, 2000 and XP are supported by:

    +

    • cups.hlp
    • cupsdrvr.dll
    • cupsui.dll

    +

    +Adobe drivers are available for the older Windows 95/98/Me as well as +the Windows NT/2000/XP clients. The set of files is different from the different platforms. -

    Windows 95, 98, and Me are supported by:

    -

    • ADFONTS.MFM

    • ADOBEPS4.DRV

    • ADOBEPS4.HLP

    • DEFPRTR2.PPD

    • ICONLIB.DLL

    • PSMON.DLL

    -

    Windows NT, 2000, and XP are supported by:

    -

    • ADOBEPS5.DLL

    • ADOBEPSU.DLL

    • ADOBEPSU.HLP

    +

    Windows 95, 98 and ME are supported by:

    +

    • ADFONTS.MFM
    • ADOBEPS4.DRV
    • ADOBEPS4.HLP
    • DEFPRTR2.PPD
    • ICONLIB.DLL
    • PSMON.DLL

    +

    Windows NT, 2000 and XP are supported by:

    +

    • ADOBEPS5.DLL
    • ADOBEPSU.DLL
    • ADOBEPSU.HLP

    Note

    -If both, the Adobe driver files and the CUPS driver files for the -support of WinNT/2k/XP are present in , the Adobe ones will be ignored -and the CUPS ones will be used. If you prefer -- for whatever reason --- to use Adobe-only drivers, move away the 3 CUPS driver files. The -Win95/98/ME clients use the Adobe drivers in any case. -

    Acquiring the Adobe Driver Files

    +If both the Adobe driver files and the CUPS driver files for the +support of Windows NT/200x/XP are present in FIXME, the Adobe ones will be ignored +and the CUPS ones will be used. If you prefer for whatever reason + to use Adobe-only drivers, move away the three CUPS driver files. The +Windows 9x/Me clients use the Adobe drivers in any case. +

    Acquiring the Adobe Driver Files

    Acquiring the Adobe driver files seems to be unexpectedly difficult -for many users. They are not available on the Adobe website as single -files and the self-extracting and/or self-installing Windows-exe is +for many users. They are not available on the Adobe Web site as single +files and the self-extracting and/or self-installing Windows-.exe is not easy to locate either. Probably you need to use the included native installer and run the installation process on one client once. This will install the drivers (and one Generic PostScript -printer) locally on the client. When they are installed, share the -Generic PostScript printer. After this, the client's +printer) locally on the client. When they are installed, share the +Generic PostScript printer. After this, the client's [print$] share holds the Adobe files, from -where you can get them with smbclient from the CUPS host. A more -detailed description about this is in the next (the CUPS printing) -chapter. -

    ESP Print Pro Package of "PostScript Driver for -WinNT/2k/XP"

    -Users of the ESP Print Pro software are able to install their "Samba -Drivers" package for this purpose with no problem. Retrieve the driver +where you can get them with smbclient from the CUPS host. +

    ESP Print Pro PostScript Driver for Windows NT/200x/XP

    + +Users of the ESP Print Pro software are able to install their Samba +drivers package for this purpose with no problem. Retrieve the driver files from the normal download area of the ESP Print Pro software -at http://www.easysw.com/software.html. -You need to locate the link labelled "SAMBA" amongst the -Download Printer Drivers for ESP Print Pro 4.x +at http://www.easysw.com/software.html. +You need to locate the link labelled “SAMBA” among the +Download Printer Drivers for ESP Print Pro 4.x area and download the package. Once installed, you can prepare any driver by simply highlighting the printer in the Printer Manager GUI -and select Export Driver... from the menu. Of -course you need to have prepared Samba beforehand too to handle the -driver files; i.e. mainly setup the [print$] -share, etc. The ESP Print Pro package includes the CUPS driver files -as well as a (licensed) set of Adobe drivers for the Windows 95/98/ME +and select Export Driver... from the menu. Of +course you need to have prepared Samba beforehand to handle the +driver files; i.e., setup the [print$] +share, and so on. The ESP Print Pro package includes the CUPS driver files +as well as a (licensed) set of Adobe drivers for the Windows 95/98/Me client family. -

    Caveats to be considered

    +

    Caveats to be Considered

    + Once you have run the install script (and possibly manually moved the cups.hlp file to /usr/share/cups/drivers/), the driver is ready to be put into Samba's [print$] share (which often maps to -/etc/samba/drivers/ and contains a subdir +/etc/samba/drivers/ and contains a subdirectory tree with WIN40 and -W32X86 branches): You do this by running -"cupsaddsmb" (see also man cupsaddsmb for +W32X86 branches). You do this by running +cupsaddsmb (see also man cupsaddsmb for CUPS since release 1.1.16).

    Tip

    - + You may need to put root into the smbpasswd file by running smbpasswd; this is especially important if you should run this whole procedure for the first time, and are not working in an environment where everything is configured for -Single Sign On to a Windows Domain Controller. +single sign on to a Windows Domain Controller.

    Once the driver files are in the [print$] share and are initialized, they are ready to be downloaded and installed by -the Win NT/2k/XP clients. +the Windows NT/200x/XP clients.

    Note

    -

    1. -Win 9x/ME clients won't work with the CUPS PostScript driver. For -these you'd still need to use the ADOBE*.* -drivers as previously. -

    2. +Win 9x/Me clients will not work with the CUPS PostScript driver. For +these you still need to use the ADOBE*.* +drivers as previously stated. +

    Note

    It is not harmful if you still have the ADOBE*.* driver files from previous installations in the /usr/share/cups/drivers/ -directory. The new cupsaddsmb (from 1.1.16) will -automatically prefer "its own" drivers if it finds both. -

  • - -Should your Win clients have had the old ADOBE*.* +directory. The new cupsaddsmb (from 1.1.16) will +automatically prefer its own drivers if it finds both. +

  • Note

    + +Should your Windows clients have had the old ADOBE*.* files for the Adobe PostScript driver installed, the download and -installation of the new CUPS PostScript driver for Windows NT/2k/XP +installation of the new CUPS PostScript driver for Windows NT/200x/XP will fail at first. You need to wipe the old driver from the clients -first. It is not enough to "delete" the printer, as the driver files +first. It is not enough to “delete” the printer, as the driver files will still be kept by the clients and re-used if you try to re-install the printer. To really get rid of the Adobe driver files on the -clients, open the "Printers" folder (possibly via Start, Settings, Control Panel, Printers), -right-click onto the folder background and select Server -Properties. When the new dialog opens, select the -Drivers tab. On the list select the driver you -want to delete and click on the Delete +clients, open the Printers folder (possibly via Start > Settings > Control Panel > Printers), +right-click on the folder background and select Server +Properties. When the new dialog opens, select the +Drivers tab. On the list select the driver you +want to delete and click the Delete button. This will only work if there is not one single printer left -which uses that particular driver. You need to "delete" all printers -using this driver in the "Printers" folder first. You will need +that uses that particular driver. You need to “delete” all printers +using this driver in the Printers folder first. You will need Administrator privileges to do this. -

  • - +

  • Note

    + Once you have successfully downloaded the CUPS PostScript driver to a client, you can easily switch all printers to this one by proceeding -as described in the printing chapter: either change -a driver for an existing printer by running the "Printer Properties" +as described in . Either change +a driver for an existing printer by running the Printer Properties dialog, or use rpcclient with the -setdriver sub-command. -

    -

    Benefits of using "CUPS PostScript Driver for -Windows NT/2k/XP" instead of Adobe Driver

    -You are interested in a comparison between the CUPS and the Adobe +setdriver subcommand. +

    Windows CUPS PostScript Driver Versus Adobe Driver

    +Are you interested in a comparison between the CUPS and the Adobe PostScript drivers? For our purposes these are the most important -items which weigh in favor of the CUPS ones: -

    • no hassle with the Adobe EULA

    • no hassle with the question “Where do I +items that weigh in favor of the CUPS ones: +

      • No hassle with the Adobe EULA.

      • No hassle with the question “Where do I get the ADOBE*.* driver files from?

      • - - the Adobe drivers (on request of the printer PPD + +The Adobe drivers (on request of the printer PPD associated with them) often put a PJL header in front of the main -PostScript part of the print file. Thus the printfile starts with +PostScript part of the print file. Thus, the printfile starts with <1B >%-12345X or <escape>%-12345X instead of %!PS). This leads to the CUPS daemon auto-typing the incoming file as a print-ready file, -not initiating a pass through the "pstops" filter (to speak more -technically, it is not regarded as the generic MIME type - -application/postscript, but as +not initiating a pass through the pstops filter (to speak more +technically, it is not regarded as the generic MIME-type + +application/postscript, but as the more special MIME type - -application/cups.vnd-postscript), + +application/cups.vnd-postscript), which therefore also leads to the page accounting in -/var/log/cups/page_log not +/var/log/cups/page_log not receiving the exact number of pages; instead the dummy page number -of "1" is logged in a standard setup)

      • the Adobe driver has more options to "mis-configure" the +of “1” is logged in a standard setup).

      • The Adobe driver has more options to misconfigure the PostScript generated by it (like setting it inadvertently to -Optimize for Speed, instead of -Optimize for Portability, which -could lead to CUPS being unable to process it)

      • the CUPS PostScript driver output sent by Windows -clients to the CUPS server will be guaranteed to be auto-typed always -as generic MIME type application/postscript, -thusly passing through the CUPS "pstops" filter and logging the +Optimize for Speed, instead of +Optimize for Portability, which +could lead to CUPS being unable to process it).

      • The CUPS PostScript driver output sent by Windows +clients to the CUPS server is guaranteed to auto-type +as the generic MIME type application/postscript, +thus passing through the CUPS pstops filter and logging the correct number of pages in the page_log for -accounting and quota purposes

      • the CUPS PostScript driver supports the sending of -additional standard (IPP) print options by Win NT/2k/XP clients. Such +accounting and quota purposes.

      • The CUPS PostScript driver supports the sending of +additional standard (IPP) print options by Windows NT/200x/XP clients. Such additional print options are: naming the CUPS standard banner pages (or the custom ones, should they be installed at the time of driver download), using the CUPS -page-label option, setting a -job-priority and setting the scheduled -time of printing (with the option to support additional -useful IPP job attributes in the future).

      • the CUPS PostScript driver supports the inclusion of -the new *cupsJobTicket comments at the +page-label option, setting a +job-priority, and setting the scheduled +time of printing (with the option to support additional +useful IPP job attributes in the future).

      • The CUPS PostScript driver supports the inclusion of +the new *cupsJobTicket comments at the beginning of the PostScript file (which could be used in the future for all sort of beneficial extensions on the CUPS side, but which will not disturb any other applications as they will regard it as a comment -and simply ignore it).

      • the CUPS PostScript driver will be the heart of the -fully fledged CUPS IPP client for Windows NT/2K/XP to be released soon -(probably alongside the first Beta release for CUPS -1.2).

    Run "cupsaddsmb" (quiet Mode)

    -The cupsaddsmb command copies the needed files into your +and simply ignore it).

  • The CUPS PostScript driver will be the heart of the +fully fledged CUPS IPP client for Windows NT/200x/XP to be released soon +(probably alongside the first beta release for CUPS +1.2).

  • Run cupsaddsmb (Quiet Mode)

    + + +The cupsaddsmb command copies the needed files into your [print$] share. Additionally, the PPD associated with this printer is copied from /etc/cups/ppd/ to [print$]. There the files wait for convenient Windows client installations via Point'n'Print. Before we can run the command successfully, we need to be sure that we can authenticate -towards Samba. If you have a small network you are probably using user -level security (security = user). +toward Samba. If you have a small network, you are probably using user-level +security (security = user).

    -Here is an example of a successfully run cupsaddsmb command. +Here is an example of a successfully run cupsaddsmb command:

     root# cupsaddsmb -U root infotec_IS2027
     Password for root required to access localhost via Samba: ['secret']
     

    To share all printers and drivers, use the -a parameter instead of a printer name. Since -cupsaddsmb "exports" the printer drivers to Samba, it should be +cupsaddsmbexports” the printer drivers to Samba, it should be obvious that it only works for queues with a CUPS driver associated. -

    Run "cupsaddsmb" with verbose Output

    +

    Run cupsaddsmb with Verbose Output

    + Probably you want to see what's going on. Use the -v parameter to get a more verbose output. The -output below was edited for better readability: all "\" at the end of +output below was edited for better readability: all “\” at the end of a line indicate that I inserted an artificial line break plus some indentation here:

    Warning

    You will see the root password for the Samba account printed on screen. -

    +

    + + + +

     root# cupsaddsmb -U root -v infotec_2105
     Password for root required to access localhost via GANDALF:
     Running command: smbclient //localhost/print\$ -N -U'root%secret' \
    @@ -9578,10 +9694,11 @@ putting file /usr/share/cups/drivers/cups.hlp as \W32X86/cups.hlp
       
     Running command: rpcclient localhost -N -U'root%secret' 
        -c 'adddriver "Windows NT x86"   \
    -   "infotec_2105:cupsdrvr.dll:infotec_2105.ppd:cupsui.dll:cups.hlp:NULL:   \
    +   "infotec_2105:cupsdrvr.dll:infotec_2105.ppd:cupsui.dll:cups.hlp:NULL: \
         RAW:NULL"'
     cmd = adddriver "Windows NT x86" \
    -    "infotec_2105:cupsdrvr.dll:infotec_2105.ppd:cupsui.dll:cups.hlp:NULL:RAW:NULL"
    +   "infotec_2105:cupsdrvr.dll:infotec_2105.ppd:cupsui.dll:cups.hlp:NULL: \
    +	RAW:NULL"
     Printer Driver infotec_2105 successfully installed.
       
     Running command: smbclient //localhost/print\$ -N -U'root%secret' \
    @@ -9609,9 +9726,10 @@ Running command: smbclient //localhost/print\$ -N -U'root%secret' \
        "infotec_2105:ADOBEPS4.DRV:infotec_2105.PPD:NULL:ADOBEPS4.HLP: \
        PSMON.DLL:RAW:ADOBEPS4.DRV,infotec_2105.PPD,ADOBEPS4.HLP,PSMON.DLL, \
         ADFONTS.MFM,DEFPRTR2.PPD,ICONLIB.DLL"'
    -  cmd = adddriver "Windows 4.0" "infotec_2105:ADOBEPS4.DRV:infotec_2105.PPD:NULL:          \
    -    ADOBEPS4.HLP:PSMON.DLL:RAW:ADOBEPS4.DRV,infotec_2105.PPD,ADOBEPS4.HLP,  \
    -                   PSMON.DLL,ADFONTS.MFM,DEFPRTR2.PPD,ICONLIB.DLL"
    +	cmd = adddriver "Windows 4.0" "infotec_2105:ADOBEPS4.DRV:\
    +	infotec_2105.PPD:NULL:ADOBEPS4.HLP:PSMON.DLL:RAW:ADOBEPS4.DRV,\
    +	infotec_2105.PPD,ADOBEPS4.HLP,PSMON.DLL,ADFONTS.MFM,DEFPRTR2.PPD,\
    +	ICONLIB.DLL"
       Printer Driver infotec_2105 successfully installed.
       
       Running command: rpcclient localhost -N -U'root%secret'  \
    @@ -9621,62 +9739,60 @@ Running command: smbclient //localhost/print\$ -N -U'root%secret' \
     
     

    If you look closely, you'll discover your root password was transferred -unencrypted over the wire, so beware! Also, if you look further her, -you'll discover error messages like NT_STATUS_OBJECT_NAME_COLLISION in -between. They occur, because the directories WIN40 and W32X86 already -existed in the [print$] driver download share -(from a previous driver installation). They are harmless here. -

    Understanding cupsaddsmb

    -What has happened? What did cupsaddsmb do? There are five stages of -the procedure +unencrypted over the wire, so beware! Also, if you look further, +you'll discover error messages like NT_STATUS_OBJECT_NAME_COLLISION in between. They occur, because the directories WIN40 and W32X86 already existed in the [print$] driver download share (from a previous driver installation). They are harmless here. +

    Understanding cupsaddsmb

    + +What has happened? What did cupsaddsmb do? There are five stages of +the procedure:

    1. - - call the CUPS server via IPP and request the -driver files and the PPD file for the named printer;

    2. store the files temporarily in the local + + Call the CUPS server via IPP and request the +driver files and the PPD file for the named printer.

    3. Store the files temporarily in the local TEMPDIR (as defined in -cupsd.conf);

    4. connect via smbclient to the Samba server's +cupsd.conf).

    5. Connect via smbclient to the Samba server's [print$] share and put the files into the - share's WIN40 (for Win95/98/ME) and W32X86/ (for WinNT/2k/XP) sub - directories;

    6. - - connect via rpcclient to the Samba server and -execute the "adddriver" command with the correct -parameters;

    7. - - connect via rpcclient to the Samba server a second -time and execute the "setdriver" command.

    -Note, that you can run the cupsaddsmb utility with parameters to + share's WIN40 (for Windows 9x/Me) and W32X86/ (for Windows NT/200x/XP) subdirectories.

  • + + Connect via rpcclient to the Samba server and +execute the adddriver command with the correct +parameters.

  • + + Connect via rpcclient to the Samba server a second +time and execute the setdriver command.

  • Note

    +You can run the cupsaddsmb utility with parameters to specify one remote host as Samba host and a second remote host as CUPS host. Especially if you want to get a deeper understanding, it is a -good idea try it and see more clearly what is going on (though in real +good idea to try it and see more clearly what is going on (though in real life most people will have their CUPS and Samba servers run on the same host):

    -root# cupsaddsmb -H sambaserver -h cupsserver -v printername
    -

    How to recognize if cupsaddsmb completed successfully

    +root# cupsaddsmb -H sambaserver -h cupsserver -v printer +

    How to Recognize If cupsaddsmb Completed Successfully

    You must always check if the utility completed -successfully in all fields. You need as a minimum these 3 messages -amongst the output: +successfully in all fields. You need as a minimum these three messages +among the output:

    1. Printer Driver infotec_2105 successfully -installed. # (for the W32X86 == WinNT/2K/XP -architecture...)

    2. Printer Driver infotec_2105 successfully -installed. # (for the WIN40 == Win9x/ME -architecture...)

    3. Successfully set [printerXPZ] to driver +installed. # (for the W32X86 == Windows NT/200x/XP +architecture).

    4. Printer Driver infotec_2105 successfully +installed. # (for the WIN40 == Windows 9x/Me +architecture).

    5. Successfully set [printerXPZ] to driver [printerXYZ].

    -These messages probably not easily recognized in the general -output. If you run cupsaddsmb with the -a +These messages are probably not easily recognized in the general +output. If you run cupsaddsmb with the -a parameter (which tries to prepare all active CUPS printer drivers for download), you might miss if individual printers -drivers had problems to install properly. Here a redirection of the +drivers had problems installing properly. Here a redirection of the output will help you analyze the results in retrospective.

    Note

    -It is impossible to see any diagnostic output if you don't run -cupsaddsmb in verbose mode. Therefore we strongly recommend to not -use the default quiet mode. It will hide any problems from you which +It is impossible to see any diagnostic output if you do not run +cupsaddsmb in verbose mode. Therefore, we strongly recommend to not +use the default quiet mode. It will hide any problems from you that might occur. -

    cupsaddsmb with a Samba PDC

    -You can't get the standard cupsaddsmb command to run on a Samba PDC? -You are asked for the password credential all over again and again and +

    cupsaddsmb with a Samba PDC

    + +Can't get the standard cupsaddsmb command to run on a Samba PDC? +Are you asked for the password credential all over again and again and the command just will not take off at all? Try one of these variations:

    @@ -9685,114 +9801,116 @@ variations:
     root# cupsaddsmb -H SAURON -U MIDEARTH\\root -h cups-server -v printername
     

    (Note the two backslashes: the first one is required to -"escape" the second one). -

    cupsaddsmb Flowchart

    -Here is a chart about the procedures, commandflows and -dataflows of the "cupaddsmb" command. Note again: cupsaddsmb is -not intended to, and does not work with, "raw" queues! -

    -

    Figure 19.16. cupsaddsmb flowchart

    cupsaddsmb flowchart

    -

    Installing the PostScript Driver on a Client

    -After cupsaddsmb completed, your driver is prepared for the clients to +“escape” the second one). +

    cupsaddsmb Flowchart

    + + shows a chart about the procedures, commandflows and +dataflows of the cupaddsmb command. Note again: cupsaddsmb is +not intended to, and does not work with, raw queues! +

    +

    Figure 19.16. cupsaddsmb flowchart.

    cupsaddsmb flowchart.

    +

    Installing the PostScript Driver on a Client

    + +After cupsaddsmb is completed, your driver is prepared for the clients to use. Here are the steps you must perform to download and install it -via "Point'n'Print". From a Windows client, browse to the CUPS/Samba -server; -

    • open the Printers -share of Samba in Network Neighbourhood;

    • right-click on the printer in -question;

    • from the opening context-menu select -Install... or -Connect... (depending on the Windows version you +via Point'n'Print. From a Windows client, browse to the CUPS/Samba +server: +

      • + +Open the Printers +share of Samba in Network Neighborhood.

      • Right-click on the printer in +question.

      • From the opening context-menu select +Install... or +Connect... (depending on the Windows version you use).

      After a few seconds, there should be a new printer in your -client's local "Printers" folder: On Windows +client's local Printers folder. On Windows XP it will follow a naming convention of PrinterName on SambaServer. (In my current case it is "infotec_2105 on kde-bitshop"). If you want to test it and send your first job from -an application like Winword, the new printer will appears in a +an application like Winword, the new printer appears in a \\SambaServer\PrinterName entry in the -dropdown list of available printers. -

      Note

      - -cupsaddsmb will only reliably work with CUPS version 1.1.15 or higher -and Samba from 2.2.4. If it doesn't work, or if the automatic printer -driver download to the clients doesn't succeed, you can still manually +drop-down list of available printers. +

      + +cupsaddsmb will only reliably work with CUPS version 1.1.15 or higher +and Samba from 2.2.4. If it does not work, or if the automatic printer +driver download to the clients does not succeed, you can still manually install the CUPS printer PPD on top of the Adobe PostScript driver on clients. Then point the client's printer queue to the Samba printer share for a UNC type of connection: -

      +

       C:\> net use lpt1: \\sambaserver\printershare /user:ntadmin
       

      should you desire to use the CUPS networked PostScript RIP -functions. (Note that user "ntadmin" needs to be a valid Samba user -with the required privileges to access the printershare) This would -set up the printer connection in the traditional +functions. (Note that user “ntadmin” needs to be a valid Samba user +with the required privileges to access the printershare.) This +sets up the printer connection in the traditional LanMan way (not using MS-RPC). -

    Avoiding critical PostScript Driver Settings on the -Client

    -Soooo: printing works, but there are still problems. Most jobs print -well, some don't print at all. Some jobs have problems with fonts, -which don't look very good. Some jobs print fast, and some are +

    Avoiding Critical PostScript Driver Settings on the Client

    +Printing works, but there are still problems. Most jobs print +well, some do not print at all. Some jobs have problems with fonts, +which do not look very good. Some jobs print fast and some are dead-slow. Many of these problems can be greatly reduced or even completely eliminated if you follow a few guidelines. Remember, if your print device is not PostScript-enabled, you are treating your Ghostscript installation on your CUPS host with the output your client driver settings produce. Treat it well: -

    • Avoid the PostScript Output Option: Optimize -for Speed setting. Rather use the Optimize for -Portability instead (Adobe PostScript -driver).

    • Don't use the Page Independence: -NO setting. Instead use Page Independence -YES (CUPS PostScript Driver)

    • Recommended is the True Type Font -Downloading Option: Native True Type over -Automatic and Outline; you -should by all means avoid Bitmap (Adobe -PostScript Driver)

    • Choose True Type Font: Download as Softfont -into Printer over the default Replace by Device -Font (for exotic fonts you may need to change it back to -get a printout at all) (Adobe)

    • Sometimes you can choose PostScript Language -Level: in case of problems try 2 -instead of 3 (the latest ESP Ghostscript package -handles Level 3 PostScript very well) (Adobe).

    • Say Yes to PostScript -Error Handler (Adobe)

    Installing PostScript Driver Files manually (using -rpcclient)

    -Of course you can run all the commands which are embedded into the +

    • Avoid the PostScript Output Option: Optimize +for Speed setting. Use the Optimize for +Portability instead (Adobe PostScript +driver).

    • Don't use the Page Independence: +NO setting. Instead, use Page Independence +YES (CUPS PostScript Driver).

    • Recommended is the True Type Font +Downloading Option: Native True Type over +Automatic and Outline; you +should by all means avoid Bitmap (Adobe +PostScript Driver).

    • Choose True Type Font: Download as Softfont +into Printer over the default Replace by Device +Font (for exotic fonts, you may need to change it back to +get a printout at all) (Adobe).

    • Sometimes you can choose PostScript Language +Level: In case of problems try 2 +instead of 3 (the latest ESP Ghostscript package +handles Level 3 PostScript very well) (Adobe).

    • Say Yes to PostScript +Error Handler (Adobe).

    Installing PostScript Driver Files Manually Using rpcclient

    +Of course, you can run all the commands that are embedded into the cupsaddsmb convenience utility yourself, one by one, and hereby upload and prepare the driver files for future client downloads. -

    1. prepare Samba (a CUPS printqueue with the name of the +

      1. Prepare Samba (A CUPS print queue with the name of the printer should be there. We are providing the driver -now);

      2. copy all files to - [print$]

      3. - - run rpcclient adddriver -(for each client architecture you want to support):

      4. - - run rpcclient +now).

      5. Copy all files to + [print$].

      6. + +Run rpcclient adddriver +(for each client architecture you want to support).

      7. + +Run rpcclient setdriver.

      - - - - - -We are going to do this now. First, read the man page on "rpcclient" + + + + + +We are going to do this now. First, read the man page on rpcclient to get a first idea. Look at all the printing related -sub-commands. enumprinters, +subcommands. enumprinters, enumdrivers, enumports, -adddriver, setdriver are amongst -the most interesting ones. rpcclient implements an important part of -the MS-RPC protocol. You can use it to query (and command) a Win NT -(or 2K/XP) PC too. MS-RPC is used by Windows clients, amongst other -things, to benefit from the "Point'n'Print" features. Samba can now -mimic this too. -

      A Check of the rpcclient man Page

      -First let's have a little check of the rpcclient man page. Here are +adddriver, setdriver are among +the most interesting ones. rpcclient implements an important part of +the MS-RPC protocol. You can use it to query (and command) a Windows NT +(or 200x/XP) PC, too. MS-RPC is used by Windows clients, among other +things, to benefit from the Point'n'Print features. Samba can now +mimic this as well. +

      A Check of the rpcclient man Page

      + First let's check the rpcclient man page. Here are two relevant passages:

      adddriver <arch> <config> Execute an -AddPrinterDriver() RPC to install the printer driver information on -the server. Note that the driver files should already exist in the -directory returned by getdriverdir. Possible +AddPrinterDriver() RPC to install the printer driver information on +the server. The driver files should already exist in the +directory returned by getdriverdir. Possible values for arch are the same as those for the -getdriverdir command. The +getdriverdir command. The config parameter is defined as follows:

       Long Printer Name:\
      @@ -9803,68 +9921,70 @@ Help File Name:\
       Language Monitor Name:\
       Default Data Type:\
       Comma Separated list of Files
      -

      Any empty fields should be enter as the string "NULL".

      Samba does not need to support the concept of Print Monitors +

      Any empty fields should be enter as the string “NULL”.

      Samba does not need to support the concept of Print Monitors since these only apply to local printers whose driver can make use of -a bi-directional link for communication. This field should be "NULL". +a bi-directional link for communication. This field should be “NULL”. On a remote NT print server, the Print Monitor for a driver must already be installed prior to adding the driver or else the RPC will -fail +fail.

      setdriver <printername> <drivername> Execute a SetPrinter() command to update the printer driver associated with an installed printer. The printer driver must already be correctly installed on the print server. -

      See also the enumprinters and enumdrivers commands for +

      See also the enumprinters and enumdrivers commands for obtaining a list of installed printers and drivers. -

      Understanding the rpcclient man page

      +

      Understanding the rpcclient man Page

      The exact format isn't made too clear by the man page, since you have to deal with some parameters containing spaces. Here is a better description for it. We have line-broken the -command and indicated the breaks with "\". Usually you would type the +command and indicated the breaks with “\”. Usually you would type the command in one line without the linebreaks: -

      +
      +

        adddriver "Architecture" \
                  "LongPrinterName:DriverFile:DataFile:ConfigFile:HelpFile:\
                  LanguageMonitorFile:DataType:ListOfFiles,Comma-separated"
       

      -What the man pages denotes as a simple <config> -keyword, does in reality consist of 8 colon-separated fields. The -last field may take multiple (in some, very insane, cases, even -20 different additional files. This might sound confusing at first. -Note, that what the man pages names the "LongPrinterName" in -reality should rather be called the "Driver Name". You can name it +What the man pages denote as a simple <config> +keyword, in reality consists of eight colon-separated fields. The +last field may take multiple (in some very insane cases, even +20 different additional) files. This might sound confusing at first. +What the man pages names the “LongPrinterName” in +reality should be called the “Driver Name”. You can name it anything you want, as long as you use this name later in the -rpcclient ... setdriver command. For +rpcclient ... setdriver command. For practical reasons, many name the driver the same as the printer.

      -True: it isn't simple at all. I hear you asking: -How do I know which files are "Driver -File", "Data File", "Config File", "Help File" and "Language -Monitor File" in each case? -- For an answer you may +It isn't simple at all. I hear you asking: +“How do I know which files are "Driver +File”, “Data File”, “Config File”, “Help File” and “Language +Monitor File" in each case?” For an answer, you may want to have a look at how a Windows NT box with a shared printer presents the files to us. Remember, that this whole procedure has -to be developed by the Samba Team by overhearing the traffic caused +to be developed by the Samba team by overhearing the traffic caused by Windows computers on the wire. We may as well turn to a Windows -box now, and access it from a UNIX workstation. We will query it +box now and access it from a UNIX workstation. We will query it with rpcclient to see what it tells us and -try to understand the man page more clearly which we've read just +try to understand the man page more clearly that we've read just now. -

      Producing an Example by querying a Windows Box

      - - +

      Producing an Example by Querying a Windows Box

      + + We could run rpcclient with a getdriver or a getprinter -subcommand (in level 3 verbosity) against it. Just sit down at UNIX or -Linux workstation with the Samba utilities installed. Then type the +subcommand (in level 3 verbosity) against it. Just sit down at a UNIX or +Linux workstation with the Samba utilities installed, then type the following command:

      -root# rpcclient -U'USERNAME%PASSWORD' NT-SERVER-NAME -c 'getdriver printername 3'
      +root# rpcclient -U'user%secret' NT-SERVER -c 'getdriver printername 3'
       

      -From the result it should become clear which is which. Here is an -example from my installation: -

      -root# rpcclient -U'Danka%xxxx' W2KSERVER \
      +From the result it should become clear which is which. Here is an example from my installation:
      +

      + +

      +root# rpcclient -U'Danka%xxxx' W200xSERVER \
       	-c'getdriver "DANKA InfoStream Virtual Printer" 3'
        cmd = getdriver "DANKA InfoStream Virtual Printer" 3
       
      @@ -9891,77 +10011,82 @@ example from my installation:
       
       

      Some printer drivers list additional files under the label -"Dependentfiles": these would go into the last field -ListOfFiles,Comma-separated. For the CUPS -PostScript drivers we don't need any (nor would we for the Adobe -PostScript driver): therefore the field will get a "NULL" entry. -

      What is required for adddriver and setdriver to succeed

      -From the manpage (and from the quoted output -of cupsaddsmb, above) it becomes clear that you +Dependentfiles and these would go into the last field +ListOfFiles,Comma-separated. For the CUPS +PostScript drivers, we do not need any (nor would we for the Adobe +PostScript driver), therefore, the field will get a “NULL” entry. +

      Requirements for adddriver and setdriver to Succeed

      +>From the man page (and from the quoted output +of cupsaddsmb above) it becomes clear that you need to have certain conditions in order to make the manual uploading -and initializing of the driver files succeed. The two rpcclient - +and initializing of the driver files succeed. The two rpcclient + subcommands (adddriver and setdriver) need to encounter the following -pre-conditions to complete successfully: -

      • you are connected as printer admin, or root (note, -that this is not the "Printer Operators" group in -NT, but the printer admin group, as defined in +preconditions to complete successfully: +

        • You are connected as printer admin or root (this is not the “Printer Operators” group in +NT, but the printer admin group as defined in the [global] section of -smb.conf);

        • copy all required driver files to -\\sambaserver\print$\w32x86 and -\\sambaserver\print$\win40 as appropriate. They -will end up in the "0" respective "2" subdirectories later -- for now -don't put them there, they'll be automatically -used by the adddriver subcommand.! (if you use -"smbclient" to put the driver files into the share, note that you need -to escape the "$": smbclient //sambaserver/print\$ -U -root);

        • the user you're connecting as must be able to write to +smb.conf).

        • Copy all required driver files to +\\SAMBA\print$\w32x86 and +\\SAMBA\print$\win40 as appropriate. They +will end up in the “0” respective “2” subdirectories later. For now, +do not put them there, they'll be automatically +used by the adddriver subcommand. (If you use +smbclient to put the driver files into the share, note that you need +to escape the “$”: smbclient //sambaserver/print\$ -U +root.)

        • The user you're connecting as must be able to write to the [print$] share and create -subdirectories;

        • the printer you are going to setup for the Windows -clients, needs to be installed in CUPS already;

        • - - - the CUPS printer must be known to Samba, otherwise the +subdirectories.

        • The printer you are going to setup for the Windows +clients needs to be installed in CUPS already.

        • + + + The CUPS printer must be known to Samba, otherwise the setdriver subcommand fails with an NT_STATUS_UNSUCCESSFUL error. To check if the printer is known by -Samba you may use the enumprinters subcommand to -rpcclient. A long-standing bug prevented a proper update of the +Samba, you may use the enumprinters subcommand to +rpcclient. A long-standing bug prevented a proper update of the printer list until every smbd process had received a SIGHUP or was restarted. Remember this in case you've created the CUPS printer just -shortly ago and encounter problems: try restarting -Samba.

      Manual Driver Installation in 15 Steps

      +recently and encounter problems: try restarting +Samba.

    Manual Driver Installation in 15 Steps

    We are going to install a printer driver now by manually executing all required commands. As this may seem a rather complicated process at first, we go through the procedure step by step, explaining every single action item as it comes up. -

    Procedure 19.1. Manual Driver Installation installation

    1. Install the Printer on CUPS

      -root# lpadmin -p mysmbtstprn -v socket://10.160.51.131:9100 -E -P canonIR85.ppd
      +

      Procedure 19.1. Manual Driver Installation

      1. Install the printer on CUPS.

        +root# lpadmin -p mysmbtstprn -v socket://10.160.51.131:9100 -E \
        +			-P canonIR85.ppd
         

        -This installs printer with the name mysmbtstprn +This installs a printer with the name mysmbtstprn to the CUPS system. The printer is accessed via a socket (a.k.a. JetDirect or Direct TCP/IP) connection. You need to be root -for this step -

      2. (optional) Check if the Printer is recognized by -Samba

        -root# rpcclient -Uroot%xxxx -c 'enumprinters' localhost | grep -C2 mysmbtstprn
        +for this step.
        +

      3. (Optional) Check if the printer is recognized by Samba.

        + +

        +	root# rpcclient -Uroot%xxxx -c 'enumprinters' localhost \
        +  | grep -C2 mysmbtstprn
         flags:[0x800000]
         name:[\\kde-bitshop\mysmbtstprn]
         description:[\\kde-bitshop\mysmbtstprn,,mysmbtstprn]
         comment:[mysmbtstprn]
         

        -This should show the printer in the list. If not, stop and re-start -the Samba daemon (smbd), or send a HUP signal: kill -HUP -`pidof smbd`. Check again. Troubleshoot and repeat until -success. Note the "empty" field between the two commas in the -"description" line. Here would the driver name appear if there was one -already. You need to know root's Samba password (as set by the +This should show the printer in the list. If not, stop and restart +the Samba daemon (smbd), or send a HUP signal: +

        +root# kill -HUP `pidof smbd`
        +

        Check again. Troubleshoot and repeat until +successful. Note the “empty” field between the two commas in the +“description” line. The driver name would appear here if there was one already. You need to know root's Samba password (as set by the smbpasswd command) for this step and most of the -following steps. Alternatively you can authenticate as one of the -users from the "write list" as defined in smb.conf for +following steps. Alternately, you can authenticate as one of the +users from the “write list” as defined in smb.conf for [print$]. -

      4. (optional) Check if Samba knows a Driver for the -Printer

        +

      5. (Optional) Check if Samba knows a driver for the printer.

        + + +

         root# rpcclient -Uroot%xxxx -c 'getprinter mysmbtstprn 2' localhost \
         			| grep driver 
         drivername:[]
        @@ -9982,13 +10107,13 @@ printprocessor:[winprint]
          result was WERR_UNKNOWN_PRINTER_DRIVER
         
         

        -Neither method of the three commands shown above should show a driver. +None of the three commands shown above should show a driver. This step was done for the purpose of demonstrating this condition. An attempt to connect to the printer at this stage will prompt the -message along the lines: "The server has not the required printer -driver installed". -

      6. Put all required Driver Files into Samba's -[print$]

        +message along the lines of: “The server does not have the required printer
        +driver installed.”
        +

      7. Put all required driver files into Samba's +[print$].

         root# smbclient //localhost/print\$ -U 'root%xxxx' \
         	-c 'cd W32X86; \
         	put /etc/cups/ppd/mysmbtstprn.ppd mysmbtstprn.PPD; \ 
        @@ -9996,15 +10121,15 @@ driver installed".
         	put /usr/share/cups/drivers/cupsdrvr.dll cupsdrvr.dll; \
         	put /usr/share/cups/drivers/cups.hlp cups.hlp'
         

        -(Note that this command should be entered in one long single -line. Line-breaks and the line-end indicating "\" has been inserted +(This command should be entered in one long single +line. Line-breaks and the line-end indicated by “\” have been inserted for readability reasons.) This step is required for the next one to succeed. It makes the driver files physically present in the [print$] share. However, clients would still not be able to install them, because Samba does not yet treat them as driver files. A client asking for the driver would still -be presented with a "not installed here" message. -

      8. Verify where the Driver Files are now

        +be presented with a “not installed here” message.
        +

      9. Verify where the driver files are now.

         root# ls -l /etc/samba/drivers/W32X86/
         total 669
         drwxr-sr-x    2 root     ntadmin       532 May 25 23:08 2
        @@ -10014,27 +10139,27 @@ drwxr-sr-x    2 root     ntadmin       670 May 16 03:15 3
         -rwxr--r--    1 root     ntadmin    215848 May 25 23:21 cupsui.dll
         -rwxr--r--    1 root     ntadmin    169458 May 25 23:21 mysmbtstprn.PPD
         

        -The driver files now are in the W32X86 architecture "root" of +The driver files now are in the W32X86 architecture “root” of [print$]. -

      10. Tell Samba that these are -Driver Files -(adddriver)

        -root# rpcclient -Uroot%xxxx -c `adddriver "Windows NT x86" "mydrivername: \
        -  cupsdrvr.dll:mysmbtstprn.PPD: \
        +

      11. Tell Samba that these are driver files (adddriver).

        + +

        +root# rpcclient -Uroot%xxxx -c `adddriver "Windows NT x86" \
        +	"mydrivername:cupsdrvr.dll:mysmbtstprn.PPD: \
           cupsui.dll:cups.hlp:NULL:RAW:NULL" \
           localhost
         Printer Driver mydrivername successfully installed.
         

        -Note that your cannot repeat this step if it fails. It could fail even +You cannot repeat this step if it fails. It could fail even as a result of a simple typo. It will most likely have moved a part of -the driver files into the "2" subdirectory. If this step fails, you -need to go back to the fourth step and repeat it, before you can try -this one again. In this step you need to choose a name for your +the driver files into the “2” subdirectory. If this step fails, you +need to go back to the fourth step and repeat it before you can try +this one again. In this step, you need to choose a name for your driver. It is normally a good idea to use the same name as is used for -the printername; however, in big installations you may use this driver -for a number of printers which have obviously different names. So the +the printer name; however, in big installations you may use this driver +for a number of printers that obviously have different names, so the name of the driver is not fixed. -

      12. Verify where the Driver Files are now

        +

      13. Verify where the driver files are now.

         root# ls -l /etc/samba/drivers/W32X86/
         total 1
         drwxr-sr-x    2 root     ntadmin       532 May 25 23:22 2
        @@ -10048,12 +10173,13 @@ total 5039
         -rwxr--r--    1 root     ntadmin    215848 May 13 13:53 cupsui.dll
         -rwxr--r--    1 root     ntadmin    169458 May 25 23:21 mysmbtstprn.PPD
         

        -Notice how step 6 did also move the driver files to the appropriate -subdirectory. Compare with the situation after step 5. -

      14. (optional) Verify if Samba now recognizes the -Driver

        -root# rpcclient -Uroot%xxxx -c 'enumdrivers 3' localhost \
        -	| grep -B2 -A5 mydrivername
        +Notice how step 6 also moved the driver files to the appropriate
        +subdirectory. Compare this with the situation after step 5.
        +

      15. (Optional) Verify if Samba now recognizes the driver.

        + +

        +root# rpcclient -Uroot%xxxx -c 'enumdrivers 3' \
        +	localhost | grep -B2 -A5 mydrivername
         Printer Driver Info 3:
         Version: [2]
         Driver Name: [mydrivername]
        @@ -10063,21 +10189,26 @@ Datafile: [\\kde-bitshop\print$\W32X86\2\mysmbtstprn.PPD]
         Configfile: [\\kde-bitshop\print$\W32X86\2\cupsui.dll]
         Helpfile: [\\kde-bitshop\print$\W32X86\2\cups.hlp]
         

        -Remember, this command greps for the name you did choose for the -driver in step Six. This command must succeed before you can proceed. -

      16. Tell Samba which Printer should use these Driver -Files (setdriver)

        -root# rpcclient -Uroot%xxxx -c 'setdriver mysmbtstprn mydrivername' localhost
        +Remember, this command greps for the name you chose for the
        +driver in step 6. This command must succeed before you can proceed.
        +

      17. Tell Samba which printer should use these driver files (setdriver).

        + +

        +root# rpcclient -Uroot%xxxx -c 'setdriver mysmbtstprn mydrivername' \
        +	localhost
         Successfully set mysmbtstprn to driver mydrivername
         

        -Since you can bind any printername (=printqueue) to any driver, this -is a very convenient way to setup many queues which use the same -driver. You don't need to repeat all the previous steps for the -setdriver command to succeed. The only pre-conditions are: +Since you can bind any printername (print queue) to any driver, this +is a convenient way to setup many queues that use the same +driver. You do not need to repeat all the previous steps for the +setdriver command to succeed. The only preconditions are: enumdrivers must find the driver and enumprinters must find the printer. -

      18. (optional) Verify if Samba has this Association -recognized

        +

      19. (Optional) Verify if Samba has recognized this association.

        + + + +

         root# rpcclient -Uroot%xxxx -c 'getprinter mysmbtstprn 2' localhost \
           | grep driver
         drivername:[mydrivername]
        @@ -10109,169 +10240,174 @@ Printer Driver Info 3:
              Monitorname: []
              Defaultdatatype: [RAW]
          
        -root# rpcclient -Uroot%xxxx -c 'enumprinters' localhost | grep mysmbtstprn
        +root# rpcclient -Uroot%xxxx -c 'enumprinters' localhost \
        +	| grep mysmbtstprn
              name:[\\kde-bitshop\mysmbtstprn]
              description:[\\kde-bitshop\mysmbtstprn,mydrivername,mysmbtstprn]
              comment:[mysmbtstprn]
         
         

        - -Compare these results with the ones from steps 2 and 3. Note that -every single of these commands show the driver is installed. Even + +Compare these results with the ones from steps 2 and 3. Every one of these commands show the driver is installed. Even the enumprinters command now lists the driver -on the "description" line. -

      20. (optional) Tickle the Driver into a correct -Device Mode

        - -You certainly know how to install the driver on the client. In case +on the “description” line. +

      21. (Optional) Tickle the driver into a correct +device mode.

        + +You certainly know how to install the driver on the client. In case you are not particularly familiar with Windows, here is a short -recipe: browse the Network Neighbourhood, go to the Samba server, look +recipe: Browse the Network Neighborhood, go to the Samba server, and look for the shares. You should see all shared Samba printers. Double-click on the one in question. The driver should get -installed, and the network connection set up. An alternative way is to -open the "Printers (and Faxes)" folder, right-click on the printer in -question and select "Connect" or "Install". As a result, a new printer -should have appeared in your client's local "Printers (and Faxes)" -folder, named something like "printersharename on Sambahostname". +installed and the network connection set up. An alternate way is to +open the Printers (and Faxes) folder, right-click on the printer in +question and select Connect or Install. As a result, a new printer +should have appeared in your client's local Printers (and Faxes) +folder, named something like printersharename on Sambahostname.

        It is important that you execute this step as a Samba printer admin (as defined in smb.conf). Here is another method -to do this on Windows XP. It uses a commandline, which you may type -into the "DOS box" (type root's smbpassword when prompted): +to do this on Windows XP. It uses a command line, which you may type +into the “DOS box” (type root's smbpassword when prompted):

        -C:\> runas /netonly /user:root "rundll32 printui.dll,PrintUIEntry /in /n\
        -			\\sambacupsserver\mysmbtstprn"
        +C:\> runas /netonly /user:root "rundll32 printui.dll,PrintUIEntry \
        +	/in /n \\sambaserver\mysmbtstprn"
         

        -Change any printer setting once (like changing "portrait" to - "landscape"), click Apply; change the setting +Change any printer setting once (like changing portrait to + landscape), click on Apply; change the setting back. -

      22. Install the Printer on a Client -("Point'n'Print")

        -C:\> rundll32 printui.dll,PrintUIEntry /in /n "\\sambacupsserver\mysmbtstprn"
        +

      23. Install the printer on a client +(Point'n'Print).

        + +

        +C:\> rundll32 printui.dll,PrintUIEntry /in /n “\\sambaserver\mysmbtstprn
         

        -If it doesn't work it could be a permission problem with the +If it does not work it could be a permission problem with the [print$] share. -

      24. Thirteenth Step (optional): Print a Test Page

        -C:\> rundll32 printui.dll,PrintUIEntry /p /n "\\sambacupsserver\mysmbtstprn"
        +

      25. (Optional) Print a test page.

        +C:\> rundll32 printui.dll,PrintUIEntry /p /n "\\sambaserver\mysmbtstprn"
         

        -Then hit [TAB] 5 times, [ENTER] twice, [TAB] once and [ENTER] again +Then hit [TAB] five times, [ENTER] twice, [TAB] once and [ENTER] again and march to the printer. -

      26. Fourteenth Step (recommended): Study the Test Page

        +

      27. (Recommended) Study the test page.

        Hmmm.... just kidding! By now you know everything about printer -installations and you don't need to read a word. Just put it in a +installations and you do not need to read a word. Just put it in a frame and bolt it to the wall with the heading "MY FIRST -RPCCLIENT-INSTALLED PRINTER" - why not just throw it away! -

      28. Fifteenth Step (obligatory): Enjoy. Jump. Celebrate your -Success

        +RPCCLIENT-INSTALLED PRINTER"  why not just throw it away!
        +

      29. (Obligatory) Enjoy. Jump. Celebrate your +success.

         root# echo "Cheeeeerioooooo! Success..." >> /var/log/samba/log.smbd
        -

    Troubleshooting revisited

    +

    Troubleshooting Revisited

    The setdriver command will fail, if in Samba's mind the queue is not already there. You had promising messages about the:

    -
      Printer Driver ABC successfully installed.
    -
     

    -after the "adddriver" parts of the procedure? But you are also seeing -a disappointing message like this one beneath? -

    -
    +after the adddriver parts of the procedure?  But you are also seeing
    +a disappointing message like this one?
    +

    result was NT_STATUS_UNSUCCESSFUL - -

    - +

    + It is not good enough that you -can see the queue in CUPS, using +can see the queue in CUPS, using the lpstat -p ir85wm command. A bug in most recent versions of Samba prevents the proper update of the queuelist. The recognition of newly installed CUPS printers -fails unless you re-start Samba or send a HUP to all smbd -processes. To verify if this is the reason why Samba doesn't -execute the setdriver command successfully, check if Samba "sees" +fails unless you restart Samba or send a HUP to all smbd +processes. To verify if this is the reason why Samba does not +execute the setdriver command successfully, check if Samba “sees” the printer: -

    -root# rpcclient transmeta -N -U'root%secret' -c 'enumprinters 0'| grep  ir85wm
    +

    + +

    +root# rpcclient transmeta -N -U'root%xxxx' -c 'enumprinters 0'|grep ir85wm
             printername:[ir85wm]
     

    -An alternative command could be this: -

    +An alternate command could be this: 
    +

    + +

     root# rpcclient transmeta -N -U'root%secret' -c 'getprinter ir85wm' 
             cmd = getprinter ir85wm
             flags:[0x800000]
             name:[\\transmeta\ir85wm]
             description:[\\transmeta\ir85wm,ir85wm,DPD]
    -        comment:[CUPS PostScript-Treiber for WinNT/2K/XP]
    +        comment:[CUPS PostScript-Treiber for Windows NT/200x/XP]
     

    -BTW, you can use these commands, plus a few more, of course, +By the way, you can use these commands, plus a few more, of course, to install drivers on remote Windows NT print servers too! -

    The printing *.tdb Files

    - - - - - - - - - - - - - +

    The Printing *.tdb Files

    + + + + + + + + + + + + + Some mystery is associated with the series of files with a -tdb-suffix appearing in every Samba installation. They are +tdb suffix appearing in every Samba installation. They are connections.tdb, printing.tdb, -share_info.tdb , +share_info.tdb, ntdrivers.tdb, unexpected.tdb, -brlock.tdb , +brlock.tdb, locking.tdb, ntforms.tdb, messages.tdb , ntprinters.tdb, sessionid.tdb and secrets.tdb. What is their purpose? -

    Trivial DataBase Files

    -A Windows NT (Print) Server keeps track of all information needed to serve +

    Trivial Database Files

    + +A Windows NT (print) server keeps track of all information needed to serve its duty toward its clients by storing entries in the Windows -"Registry". Client queries are answered by reading from the registry, -Administrator or user configuration settings are saved by writing into -the Registry. Samba and UNIX obviously don't have such a kind of +registry. Client queries are answered by reading from the registry, +Administrator or user configuration settings that are saved by writing into +the registry. Samba and UNIX obviously do not have such a Registry. Samba instead keeps track of all client related information in a series of *.tdb files. (TDB = Trivial Data Base). These are often located in /var/lib/samba/ -or /var/lock/samba/ . The printing related files +or /var/lock/samba/. The printing related files are ntprinters.tdb, printing.tdb,ntforms.tdb and ntdrivers.tdb. -

    Binary Format

    +

    Binary Format

    *.tdb files are not human readable. They are -written in a binary format. "Why not ASCII?", you may ask. "After all, -ASCII configuration files are a good and proofed tradition on UNIX." --- The reason for this design decision by the Samba Team is mainly +written in a binary format. “Why not ASCII?”, you may ask. “After all, +ASCII configuration files are a good and proven tradition on UNIX.” +The reason for this design decision by the Samba team is mainly performance. Samba needs to be fast; it runs a separate smbd process for each client connection, in some -environments many thousand of them. Some of these smbds might need to +environments many thousands of them. Some of these smbds might need to write-access the same *.tdb file at the same time. The file format of Samba's *.tdb files allows for this provision. Many smbd processes may write to the same *.tdb file at the same time. This wouldn't be possible with pure ASCII files. -

    Losing *.tdb Files

    +

    Losing *.tdb Files

    It is very important that all *.tdb files remain consistent over all write and read accesses. However, it may happen that these files do get corrupted. (A -kill -9 `pidof smbd` while a write access is in +kill -9 `pidof smbd' while a write access is in progress could do the damage as well as a power interruption, etc.). In cases of trouble, a deletion of the old printing-related -*.tdb files may be the only option. You need to -re-create all print related setup after that. Or you have made a +*.tdb files may be the only option. After that you need to +re-create all print-related setup or you have made a backup of the *.tdb files in time. -

    Using tdbbackup

    -Samba ships with a little utility which helps the root user of your -system to back up your *.tdb files. If you run it -with no argument, it prints a little usage message: +

    Using tdbbackup

    + + +Samba ships with a little utility that helps the root user of your +system to backup your *.tdb files. If you run it +with no argument, it prints a usage message:

     root# tdbbackup
      Usage: tdbbackup [options] <fname...>
    @@ -10282,12 +10418,12 @@ with no argument, it prints a little usage message:
        -v            verify mode (restore if corrupt)
     
     

    -Here is how I backed up my printing.tdb file: +Here is how I backed up my printing.tdb file:

     root# ls
    -.              browse.dat       locking.tdb     ntdrivers.tdb   printing.tdb
    -..             share_info.tdb   connections.tdb messages.tdb    ntforms.tdb
    -printing.tdbkp unexpected.tdb   brlock.tdb      gmon.out        namelist.debug  
    +.              browse.dat     locking.tdb     ntdrivers.tdb printing.tdb
    +..             share_info.tdb connections.tdb messages.tdb  ntforms.tdb
    +printing.tdbkp unexpected.tdb brlock.tdb      gmon.out      namelist.debug  
     ntprinters.tdb sessionid.tdb
      
     root# tdbbackup -s .bak printing.tdb
    @@ -10297,956 +10433,961 @@ ntprinters.tdb sessionid.tdb
      -rw-------    1 root     root        40960 May  2 03:44 printing.tdb
      -rw-------    1 root     root        40960 May  2 03:44 printing.tdb.bak
     
    -

    CUPS Print Drivers from Linuxprinting.org

    -CUPS ships with good support for HP LaserJet type printers. You can +

    CUPS Print Drivers from Linuxprinting.org

    + +CUPS ships with good support for HP LaserJet-type printers. You can install the generic driver as follows: -

    +

    + +

     root# lpadmin -p laserjet4plus -v parallel:/dev/lp0 -E -m laserjet.ppd
     

    The -m switch will retrieve the laserjet.ppd from the standard repository for not-yet-installed-PPDs, which CUPS typically stores in -/usr/share/cups/model. Alternatively, you may use +/usr/share/cups/model. Alternately, you may use -P /path/to/your.ppd.

    -The generic laserjet.ppd however does not support every special option -for every LaserJet-compatible model. It constitutes a sort of "least -denominator" of all the models. If for some reason it is ruled out to -you to pay for the commercially available ESP Print Pro drivers, your -first move should be to consult the database on http://www.linuxprinting.org/printer_list.cgi. +The generic laserjet.ppd, however, does not support every special option +for every LaserJet-compatible model. It constitutes a sort of “least common +denominator” of all the models. If for some reason +you must pay for the commercially available ESP Print Pro drivers, your +first move should be to consult the database on http://www.linuxprinting.org/printer_list.cgi. Linuxprinting.org has excellent recommendations about which driver is best used for each printer. Its database is kept current by the tireless work of Till Kamppeter from MandrakeSoft, who is also the -principal author of the foomatic-rip utility. +principal author of the foomatic-rip utility.

    Note

    - -The former "cupsomatic" concept is now be replaced by the new, much -more powerful "foomatic-rip". foomatic-rip is the successor of -cupsomatic. cupsomatic is no longer maintained. Here is the new URL -to the Foomatic-3.0 database:http://www.linuxprinting.org/driver_list.cgi. -If you upgrade to foomatic-rip, don't forget to also upgrade to the -new-style PPDs for your foomatic-driven printers. foomatic-rip will -not work with PPDs generated for the old cupsomatic. The new-style + +The former cupsomatic concept is now being replaced by the new +successor, a much +more powerful foomatic-rip. +cupsomatic is no longer maintained. Here is the new URL +to the Foomatic-3.0 database: http://www.linuxprinting.org/driver_list.cgi. +If you upgrade to foomatic-rip, remember to also upgrade to the +new-style PPDs for your Foomatic-driven printers. foomatic-rip will +not work with PPDs generated for the old cupsomatic. The new-style PPDs are 100% compliant to the Adobe PPD specification. They are -intended to be used by Samba and the cupsaddsmb utility also, to -provide the driver files for the Windows clients also! -

    foomatic-rip and Foomatic explained

    -Nowadays most Linux distros rely on the utilities of Linuxprinting.org -to create their printing related software (which, BTW, works on all -UNIXes and on Mac OS X or Darwin too). It is not known as well as it -should be, that it also has a very end-user friendly interface which -allows for an easy update of drivers and PPDs, for all supported -models, all spoolers, all operating systems and all package formats +also intended to be used by Samba and the cupsaddsmb utility, to +provide the driver files for the Windows clients! +

    foomatic-rip and Foomatic Explained

    + + +Nowadays, most Linux distributions rely on the utilities of Linuxprinting.org +to create their printing-related software (which, by the way, works on all +UNIXes and on Mac OS X or Darwin, too). It is not known as well as it +should be, that it also has a very end-user-friendly interface that +allows for an easy update of drivers and PPDs for all supported +models, all spoolers, all operating systems, and all package formats (because there is none). Its history goes back a few years.

    -Recently Foomatic has achieved the astonishing milestone of 1000 -listed printer models. Linuxprinting.org keeps all the +Recently, Foomatic has achieved the astonishing milestone of 1000 +listed printer models. Linuxprinting.org keeps all the important facts about printer drivers, supported models and which options are available for the various driver/printer combinations in -its Foomatic -database. Currently there are 245 drivers -in the database: many drivers support various models, and many models -may be driven by different drivers; it's your choice! -

    690 "perfect" Printers

    -At present there are 690 devices dubbed as working "perfectly", 181 -"mostly", 96 "partially" and 46 are "Paperweights". Keeping in mind +its Foomatic +database. Currently there are 245 drivers +in the database. Many drivers support various models, and many models +may be driven by different drivers its your choice! +

    690 “Perfect” Printers

    +At present, there are 690 devices dubbed as working perfectly, 181 +mostly, 96 partially, and 46 are paperweights. Keeping in mind that most of these are non-PostScript models (PostScript printers are -automatically supported supported by CUPS to perfection, by using -their own manufacturer-provided Windows-PPD...), and that a -multifunctional device never qualifies as working "perfectly" if it -doesn't also scan and copy and fax under GNU/Linux: then this is a -truly astonishing achievement. Three years ago the number was not -more than 500, and Linux or UNIX "printing" at the time wasn't -anywhere near the quality it is today! -

    How the "Printing HOWTO" started it all

    -A few years ago Grant Taylor +automatically supported by CUPS to perfection, by using +their own manufacturer-provided Windows-PPD), and that a +multifunctional device never qualifies as working perfectly if it +does not also scan and copy and fax under GNU/Linux then this is a +truly astonishing achievement! Three years ago the number was not +more than 500, and Linux or UNIX printing at the time wasn't +anywhere near the quality it is today. +

    How the Printing HOWTO Started It All

    +A few years ago Grant Taylor started it all. The roots of today's Linuxprinting.org are in the -first Linux Printing -HOWTO which he authored. As a side-project to this document, +first Linux Printing +HOWTO that he authored. As a side-project to this document, which served many Linux users and admins to guide their first steps in this complicated and delicate setup (to a scientist, printing is -"applying a structured deposition of distinct patterns of ink or toner -particles on paper substrates" ;-), he started to +“applying a structured deposition of distinct patterns of ink or toner +particles on paper substrates”, he started to build in a little Postgres database with information about the hardware and driver zoo that made up Linux printing of the time. This database became the core component of today's Foomatic collection of -tools and data. In the meantime it has moved to an XML representation +tools and data. In the meantime, it has moved to an XML representation of the data. -

    Foomatic's strange Name

    -"Why the funny name?", you ask. When it really took off, around spring +

    Foomatic's Strange Name

    + +“Why the funny name?” you ask. When it really took off, around spring 2000, CUPS was far less popular than today, and most systems used LPD, -LPRng or even PDQ to print. CUPS shipped with a few generic "drivers" +LPRng or even PDQ to print. CUPS shipped with a few generic drivers (good for a few hundred different printer models). These didn't support many device-specific options. CUPS also shipped with its own -built-in rasterization filter ("pstoraster", derived from +built-in rasterization filter (pstoraster, derived from Ghostscript). On the other hand, CUPS provided brilliant support for controlling all printer options through -standardized and well-defined "PPD files" (PostScript Printers +standardized and well-defined PPD files (PostScript Printers Description files). Plus, CUPS was designed to be easily extensible.

    -Grant already had in his database a respectable compilation -of facts about a many more printers, and the Ghostscript "drivers" -they run with. His idea, to generate PPDs from the database info +Taylor already had in his database a respectable compilation +of facts about many more printers and the Ghostscript “drivers” +they run with. His idea, to generate PPDs from the database information and use them to make standard Ghostscript filters work within CUPS, -proved to work very well. It also "killed several birds with one -stone": +proved to work very well. It also killed several birds with one +stone:

    • It made all current and future Ghostscript filter -developments available for CUPS;

    • It made available a lot of additional printer models -to CUPS users (because often the "traditional" Ghostscript way of -printing was the only one available);

    • It gave all the advanced CUPS options (web interface, +developments available for CUPS.

    • It made available a lot of additional printer models +to CUPS users (because often the traditional Ghostscript way of +printing was the only one available).

    • It gave all the advanced CUPS options (Web interface, GUI driver configurations) to users wanting (or needing) to use -Ghostscript filters.

    cupsomatic, pdqomatic, lpdomatic, directomatic

    -CUPS worked through a quickly-hacked up filter script named cupsomatic. +Ghostscript filters.

    cupsomatic, pdqomatic, lpdomatic, directomatic

    + + + +CUPS worked through a quickly-hacked up filter script named cupsomatic. cupsomatic ran the printfile through Ghostscript, constructing automatically the rather complicated command line needed. It just -required to be copied into the CUPS system to make it work. To -"configure" the way cupsomatic controls the Ghostscript rendering +needed to be copied into the CUPS system to make it work. To +configure the way cupsomatic controls the Ghostscript rendering process, it needs a CUPS-PPD. This PPD is generated directly from the contents of the database. For CUPS and the respective printer/filter -combo another Perl script named "CUPS-O-Matic" did the PPD -generation. After that was working, Grant implemented within a few +combo, another Perl script named CUPS-O-Matic did the PPD +generation. After that was working, Taylor implemented within a few days a similar thing for two other spoolers. Names chosen for the -config-generator scripts were PDQ-O-Matic -(for PDQ) and LPD-O-Matic -(for - you guessed it - LPD); the configuration here didn't use PPDs +config-generator scripts were PDQ-O-Matic +(for PDQ) and LPD-O-Matic +(for you guessed it LPD); the configuration here didn't use PPDs but other spooler-specific files.

    -From late summer of that year, Till Kamppeter -started to put work into the database. Till had been newly employed by -MandrakeSoft to -convert their printing system over to CUPS, after they had seen his -FLTK-based XPP (a GUI frontend to +From late summer of that year, Till Kamppeter +started to put work into the database. Kamppeter had been newly employed by +MandrakeSoft to +convert its printing system over to CUPS, after they had seen his +FLTK-based XPP (a GUI frontend to the CUPS lp-command). He added a huge amount of new information and new printers. He also developed the support for other spoolers, like -PPR (via ppromatic), -GNUlpr and -LPRng (both via an extended -lpdomatic) and "spoolerless" printing (directomatic).... -

    -So, to answer your question: "Foomatic" is the general name for all -the overlapping code and data behind the "*omatic" scripts.... -- -Foomatic up to versions 2.0.x required (ugly) Perl data structures -attached the Linuxprinting.org PPDs for CUPS. It had a different -"*omatic" script for every spooler, as well as different printer -configuration files.. -

    The Grand Unification -achieved...

    -This all has changed in Foomatic versions 2.9 (Beta) and released as -"stable" 3.0. This has now achieved the convergence of all *omatic -scripts: it is called the foomatic-rip. +PPR (via ppromatic), +GNUlpr and +LPRng (both via an extended +lpdomatic) and spoolerless printing (directomatic). +

    +So, to answer your question: “Foomatic” is the general name for all +the overlapping code and data behind the “*omatic” scripts. +Foomatic, up to versions 2.0.x, required (ugly) Perl data structures +attached to Linuxprinting.org PPDs for CUPS. It had a different +“*omatic” script for every spooler, as well as different printer +configuration files. +

    The Grand Unification Achieved

    + +This has all changed in Foomatic versions 2.9 (beta) and released as +“stable” 3.0. It has now achieved the convergence of all *omatic +scripts and is called the foomatic-rip. This single script is the unification of the previously different spooler-specific *omatic scripts. foomatic-rip is used by all the -different spoolers alike. Because foomatic-rip can read PPDs (both the +different spoolers alike and because it can read PPDs (both the original PostScript printer PPDs and the Linuxprinting.org-generated ones), all of a sudden all supported spoolers can have the power of -PPDs at their disposal; users only need to plug "foomatic-rip" into -their system.... For users there is improved media type and source -support; paper sizes and trays are easier to configure. +PPDs at their disposal. Users only need to plug foomatic-rip into +their system. For users there is improved media type and source +support paper sizes and trays are easier to configure.

    -Also, the New Generation of Linuxprinting.org PPDs doesn't contain -Perl data structures any more. If you are a distro maintainer and have +Also, the New Generation of Linuxprinting.org PPDs no longer contains +Perl data structures. If you are a distro maintainer and have used the previous version of Foomatic, you may want to give the new -one a spin: but don't forget to generate a new-version set of PPDs, -via the new foomatic-db-engine! +one a spin, but remember to generate a new-version set of PPDs +via the new foomatic-db-engine! Individual users just need to generate a single new PPD specific to -their model by following -the steps outlined in the Foomatic tutorial or further -below. This new development is truly amazing. +their model by following +the steps outlined in the Foomatic tutorial or in this chapter. This new development is truly amazing.

    foomatic-rip is a very clever wrapper around the need to run -Ghostscript with a different syntax, different options, different -device selections and/or different filters for each different printer -or different spooler. At the same time it can read the PPD associated +Ghostscript with a different syntax, options, device selections, and/or filters for each different printer +or spooler. At the same time it can read the PPD associated with a print queue and modify the print job according to the user selections. Together with this comes the 100% compliance of the new -Foomatic PPDs with the Adobe spec. Some really innovative features of -the Foomatic concept will surprise users: it will support custom paper -sizes for many printers; and it will support printing on media drawn -from different paper trays within the same job (in both cases: even +Foomatic PPDs with the Adobe spec. Some innovative features of +the Foomatic concept may surprise users. It will support custom paper +sizes for many printers and will support printing on media drawn +from different paper trays within the same job (in both cases, even where there is no support for this from Windows-based vendor printer drivers). -

    Driver Development outside

    +

    Driver Development Outside

    Most driver development itself does not happen within Linuxprinting.org. Drivers are written by independent maintainers. -Linuxprinting.org just pools all the information, and stores it in its +Linuxprinting.org just pools all the information and stores it in its database. In addition, it also provides the Foomatic glue to integrate the many drivers into any modern (or legacy) printing system known to the world.

    -Speaking of the different driver development groups: most of +Speaking of the different driver development groups, most of the work is currently done in three projects. These are: -

    • Omni --- a Free Software project by IBM which tries to convert their printer +

      • Omni + a free software project by IBM that tries to convert their printer driver knowledge from good-ol' OS/2 times into a modern, modular, -universal driver architecture for Linux/UNIX (still Beta). This -currently supports 437 models.

      • HPIJS -- -a Free Software project by HP to provide the support for their own +universal driver architecture for Linux/UNIX (still beta). This +currently supports 437 models.

      • HPIJS +a free software project by HP to provide the support for their own range of models (very mature, printing in most cases is perfect and provides true photo quality). This currently supports 369 -models.

      • Gimp-Print -- a Free software +models.

      • Gimp-Print a free software effort, started by Michael Sweet (also lead developer for CUPS), now directed by Robert Krawitz, which has achieved an amazing level of photo print quality (many Epson users swear that its quality is better than the vendor drivers provided by Epson for the Microsoft -platforms). This currently supports 522 models.

    Forums, Downloads, Tutorials, Howtos -- also for Mac OS X and -commercial UNIX

    -Linuxprinting.org today is the one-stop "shop" to download printer -drivers. Look for printer information and tutorials -or solve printing problems in its popular forums. But -it's not just for GNU/Linux: users and admins of commercial UNIX -systems are also going there, and the relatively new Mac -OS X forum has turned out to be one of the most frequented -fora after only a few weeks. +platforms). This currently supports 522 models.

    Forums, Downloads, Tutorials, Howtos also for Mac OS X and Commercial UNIX

    +Linuxprinting.org today is the one-stop shop to download printer +drivers. Look for printer information and tutorials +or solve printing problems in its popular forums. This forum +it's not just for GNU/Linux users, but admins of commercial UNIX +systems are also going there, and the relatively new Mac +OS X forum has turned out to be one of the most frequented +forums after only a few weeks.

    Linuxprinting.org and the Foomatic driver wrappers around Ghostscript are now a standard toolchain for printing on all the important distros. Most of them also have CUPS underneath. While in recent years -most printer data had been added by Till (who works at Mandrake), many +most printer data had been added by Kamppeter (who works at Mandrake), many additional contributions came from engineers with SuSE, RedHat, -Connectiva, Debian and others. Vendor-neutrality is an important goal +Connectiva, Debian, and others. Vendor-neutrality is an important goal of the Foomatic project.

    Note

    Till Kamppeter from MandrakeSoft is doing an excellent job in his spare time to maintain Linuxprinting.org and Foomatic. So if you use it often, please send him a note showing your appreciation. -

    Foomatic Database generated PPDs

    +

    Foomatic Database-Generated PPDs

    The Foomatic database is an amazing piece of ingenuity in itself. Not only does it keep the printer and driver information, but it is -organized in a way that it can generate "PPD" files "on the fly" from +organized in a way that it can generate PPD files on the fly from its internal XML-based datasets. While these PPDs are modelled to the -Adobe specification of "PostScript Printer Descriptions" (PPDs), the -Linuxprinting.org/Foomatic-PPDs don't normally drive PostScript -printers: they are used to describe all the bells and whistles you -could ring or blow on an Epson Stylus inkjet, or a HP Photosmart or -what-have-you. The main "trick" is one little additional line, not -envisaged by the PPD specification, starting with the "*cupsFilter" -keyword: it tells the CUPS daemon how to proceed with the PostScript +Adobe specification of PostScript Printer Descriptions (PPDs), the +Linuxprinting.org/Foomatic-PPDs do not normally drive PostScript +printers. They are used to describe all the bells and whistles you +could ring or blow on an Epson Stylus inkjet, or a HP Photosmart, or +what-have-you. The main trick is one little additional line, not +envisaged by the PPD specification, starting with the *cupsFilter +keyword. It tells the CUPS daemon how to proceed with the PostScript print file (old-style Foomatic-PPDs named the -cupsomatic filter script, while the new-style -PPDs now call foomatic-rip). This filter +cupsomatic filter script, while the new-style +PPDs are now call foomatic-rip). This filter script calls Ghostscript on the host system (the recommended variant is ESP Ghostscript) to do the rendering work. foomatic-rip knows which filter or internal device setting it should ask from Ghostscript to convert the PostScript printjob into a raster format ready for the target device. This usage of PPDs to describe the options of non-PS -printers was the invention of the CUPS developers. The rest is easy: -GUI tools (like KDE's marvellous "kprinter", -or the GNOME "gtklp", "xpp" and the CUPS -web interface) read the PPD too and use this information to present +printers was the invention of the CUPS developers. The rest is easy. +GUI tools (like KDE's marvelous kprinter, +or the GNOME gtklp, xpp and the CUPS +Web interface) read the PPD as well and use this information to present the available settings to the user as an intuitive menu selection. -

    foomatic-rip and Foomatic-PPD Download and Installation

    -Here are the steps to install a foomatic-rip driven "LaserJet 4 Plus" -compatible printer in CUPS (note that recent distributions of SuSE, -UnitedLinux and Mandrake may ship with a complete package of -Foomatic-PPDs plus the foomatic-rip utility. going directly to -Linuxprinting.org ensures you to get the latest driver/PPD files): -

    foomatic-rip and Foomatic-PPD Download and Installation

    +Here are the steps to install a foomatic-rip driven LaserJet 4 Plus-compatible +printer in CUPS (note that recent distributions of SuSE, UnitedLinux and +Mandrake may ship with a complete package of Foomatic-PPDs plus the +foomatic-rip utility. Going directly to +Linuxprinting.org ensures that you get the latest driver/PPD files): +

    • Open your browser at the Linuxprinting.org printer listpage. +

    • Check the complete list of printers in the +database.. +

    • Select your model and click on the link. +

    • You'll arrive at a page listing all drivers working with this +model (for all printers, there will always be one +recommended driver. Try this one first). +

    • In our case (HP LaserJet 4 Plus), we'll arrive at the default driver for the +HP-LaserJet 4 Plus. +

    • The recommended driver is ljet4.

    • Several links are provided here. You should visit them all if you +are not familiar with the Linuxprinting.org database. +

    • There is a link to the database page for the +ljet4. On the driver's page, you'll find important and detailed information about how to use that driver within the various available spoolers.

    • Another link may lead you to the homepage of the -driver author or the driver.

    • Important links are the ones which provide hints with -setup instructions for CUPS (http://www.linuxprinting.org/cups-doc.html), -PDQ (http://www.linuxprinting.org/pdq-doc.html), -LPD, LPRng and GNUlpr (http://www.linuxprinting.org/lpd-doc.html) -as well as PPR (http://www.linuxprinting.org/ppr-doc.html) -or "spooler-less" printing (http://www.linuxprinting.org/direct-doc.html -).

    • You can view the PPD in your browser through this -link: http://www.linuxprinting.org/ppd-o-matic.cgi?driver=ljet4&printer=HP-LaserJet_4_Plus&show=1 -

    • You can also (most importantly) -generate and download the PPD: http://www.linuxprinting.org/ppd-o-matic.cgi?driver=ljet4&printer=HP-LaserJet_4_Plus&show=0 +driver author or the driver.

    • Important links are the ones that provide hints with +setup instructions for CUPS, +PDQ, +LPD, LPRng and GNUlpr) +as well as PPR +or “spooler-lessprinting. +

    • You can view the PPD in your browser through this link: +http://www.linuxprinting.org/ppd-o-matic.cgi?driver=ljet4&printer=HP-LaserJet_4_Plus&show=1 +

    • Most importantly, you can also generate and download +the PPD.

    • The PPD contains all the information needed to use our -model and the driver; this is, once installed, working transparently -for the user. Later you'll only need to choose resolution, paper size -etc. from the web-based menu, or from the print dialog GUI, or from -the commandline.

    • Should you have ended up on the driver's page (http://www.linuxprinting.org/show_driver.cgi?driver=ljet4), -you can choose to use the "PPD-O-Matic" online PPD generator -program.

    • Select the exact model and check either "download" or -"display PPD file" and click on "Generate PPD file".

    • If you save the PPD file from the browser view, please -don't use "cut'n'past" (since it could possibly damage line endings -and tabs, which makes the PPD likely to fail its duty), but use "Save -as..." in your browser's menu. (Best is to use the "download" option -from the web page directly).

    • Another very interesting part on each driver page is -the Show execution details button. If you -select your printer model and click that button, you will get -displayed a complete Ghostscript command line, enumerating all options -available for that driver/printermodel combo. This is a great way to -"Learn Ghostscript By Doing". It is also an excellent "cheat sheet" +model and the driver; once installed, this works transparently +for the user. Later you'll only need to choose resolution, paper size, +and so on from the Web-based menu, or from the print dialog GUI, or from +the command line.

    • If you ended up on the drivers +page +you can choose to use the “PPD-O-Matic” online PPD generator +program.

    • Select the exact model and check either Download or +Display PPD file and click Generate PPD file.

    • If you save the PPD file from the browser view, please +do not use cut and paste (since it could possibly damage line endings +and tabs, which makes the PPD likely to fail its duty), but use Save +as... in your browser's menu. (It is best to use the Download option +directly from the Web page).

    • Another interesting part on each driver page is +the Show execution details button. If you +select your printer model and click on that button, +a complete Ghostscript command line will be displayed, enumerating all options +available for that combination of driver and printer model. This is a great way to +“learn Ghostscript by doing”. It is also an excellent cheat sheet for all experienced users who need to re-construct a good command line for that damn printing script, but can't remember the exact -syntax. ;-)

    • Some time during your visit to Linuxprinting.org, save +syntax.

    • Some time during your visit to Linuxprinting.org, save the PPD to a suitable place on your harddisk, say /path/to/my-printer.ppd (if you prefer to install -your printers with the help of the CUPS web interface, save the PPD to -the /usr/share/cups/model/ path and re-start -cupsd).

    • Then install the printer with a suitable commandline, -e.g.: +your printers with the help of the CUPS Web interface, save the PPD to +the /usr/share/cups/model/ path and restart +cupsd).

    • Then install the printer with a suitable command line, +like this:

      -root# lpadmin -p laserjet4plus -v parallel:/dev/lp0 -E -P path/to/my-printer.ppd
      -
    • Note again this: for all the new-style "Foomatic-PPDs" -from Linuxprinting.org, you also need a special "CUPS filter" named -"foomatic-rip".Get the latest version of "foomatic-rip" from: http://www.linuxprinting.org/foomatic2.9/download.cgi?filename=foomatic-rip&show=0 +root# lpadmin -p laserjet4plus -v parallel:/dev/lp0 -E \ + -P path/to/my-printer.ppd +

    • For all the new-style “Foomatic-PPDs” +from Linuxprinting.org, you also need a special CUPS filter named +foomatic-rip.

    • The foomatic-rip Perlscript itself also makes some -interesting reading (http://www.linuxprinting.org/foomatic2.9/download.cgi?filename=foomatic-rip&show=1), -because it is very well documented by Till's inline comments (even +interesting reading +because it is well documented by Kamppeter's inline comments (even non-Perl hackers will learn quite a bit about printing by reading -it... ;-)

    • Save foomatic-rip either directly in +it).

    • Save foomatic-rip either directly in /usr/lib/cups/filter/foomatic-rip or somewhere in -your $PATH (and don't forget to make it world-executable). Again, -don't save by "copy'n'paste" but use the appropriate link, or the -"Save as..." menu item in your browser.

    • If you save foomatic-rip in your $PATH, create a symlink: -cd /usr/lib/cups/filter/ ; ln -s `which -foomatic-rip`. For CUPS to discover this new -available filter at startup, you need to re-start +your $PATH (and remember to make it world-executable). Again, +do not save by copy and paste but use the appropriate link or the +Save as... menu item in your browser.

    • If you save foomatic-rip in your $PATH, create a symlink: +

      +root# cd /usr/lib/cups/filter/ ; ln -s `which foomatic-rip'
      +

      +

      +CUPS will discover this new available filter at startup after restarting cupsd.

    -Once you print to a printqueue set up with the Foomatic-PPD, CUPS will +Once you print to a print queue set up with the Foomatic-PPD, CUPS will insert the appropriate commands and comments into the resulting PostScript jobfile. foomatic-rip is able to read and act upon -these. foomatic-rip uses some specially encoded Foomatic comments, +these and uses some specially encoded Foomatic comments embedded in the jobfile. These in turn are used to construct -(transparently for you, the user) the complicated ghostscript command -line telling for the printer driver how exactly the resulting raster -data should look like and which printer commands to embed into the -data stream. -

    -You need: -

    • A "foomatic+something" PPD -- but it this not enough +(transparently for you, the user) the complicated Ghostscript command +line telling the printer driver exactly how the resulting raster +data should look and which printer commands to embed into the +data stream. You need: +

      • A “foomatic+something” PPD but this is not enough to print with CUPS (it is only one important -component)

      • The "foomatic-rip" filter script (Perl) in -/usr/lib/cups/filters/

      • Perl to make foomatic-rip run

      • Ghostscript (because it is doing the main work, +component).

      • The foomatic-rip filter script (Perl) in +/usr/lib/cups/filters/.

      • Perl to make foomatic-rip run.

      • Ghostscript (because it is doing the main work, controlled by the PPD/foomatic-rip combo) to produce the raster data -fit for your printermodel's consumption

      • Ghostscript must (depending on -the driver/model) contain support for a certain "device", representing -the selected "driver" for your model (as shown by "gs --h")

      • foomatic-rip needs a new version of PPDs (PPD versions -produced for cupsomatic don't work with -foomatic-rip).

    Page Accounting with CUPS

    -Often there are questions regarding "print quotas" wherein Samba users +fit for your printer model's consumption.

  • Ghostscript must (depending on +the driver/model) contain support for a certain device representing +the selected driver for your model (as shown by gs + -h).

  • foomatic-rip needs a new version of PPDs (PPD versions +produced for cupsomatic do not work with +foomatic-rip).

  • Page Accounting with CUPS

    + +Often there are questions regarding print quotas where Samba users (that is, Windows clients) should not be able to print beyond a -certain amount of pages or data volume per day, week or month. This +certain number of pages or data volume per day, week or month. This feature is dependent on the real print subsystem you're using. Samba's part is always to receive the job files from the clients (filtered or unfiltered) and hand it over to this printing subsystem.

    -Of course one could "hack" things with one's own scripts. But then -there is CUPS. CUPS supports "quotas" which can be based on sizes of -jobs or on the number of pages or both, and are spanning any time +Of course one could hack things with one's own scripts. But then +there is CUPS. CUPS supports quotas that can be based on the size of +jobs or on the number of pages or both, and span any time period you want. -

    Setting up Quotas

    -This is an example command how root would set a print quota in CUPS, -assuming an existing printer named "quotaprinter": -

    +

    Setting Up Quotas

    + +This is an example command of how root would set a print quota in CUPS, +assuming an existing printer named “quotaprinter”: +

    + +

     root# lpadmin -p quotaprinter -o job-quota-period=604800 \
     	-o job-k-limit=1024 -o job-page-limit=100
     

    This would limit every single user to print 100 pages or 1024 KB of data (whichever comes first) within the last 604,800 seconds ( = 1 week). -

    Correct and incorrect Accounting

    +

    Correct and Incorrect Accounting

    For CUPS to count correctly, the printfile needs to pass the CUPS -"pstops" filter, otherwise it uses a "dummy" count of "1". Some -printfiles don't pass it (eg: image files) but then those are mostly 1 +pstops filter, otherwise it uses a dummy count of “one”. Some +print files do not pass it (e.g., image files) but then those are mostly one- page jobs anyway. This also means that proprietary drivers for the target printer running on the client computers and CUPS/Samba, which -then spool these files as "raw" (i.e. leaving them untouched, not -filtering them), will be counted as "1-pagers" too! +then spool these files as “raw” (i.e., leaving them untouched, not +filtering them), will be counted as one-pagers too!

    -You need to send PostScript from the clients (i.e. run a PostScript +You need to send PostScript from the clients (i.e., run a PostScript driver there) to have the chance to get accounting done. If the printer is a non-PostScript model, you need to let CUPS do the job to convert the file to a print-ready format for the target printer. This -will be working for currently about 1,000 different printer models, -see the driver list at linuxprinting.org/. -

    Adobe and CUPS PostScript Drivers for Windows Clients

    -Before CUPS-1.1.16 your only option was to use the Adobe PostScript +is currently working for about a thousand different printer models. +Linuxprinting has a driver +list. +

    Adobe and CUPS PostScript Drivers for Windows Clients

    +Before CUPS 1.1.16, your only option was to use the Adobe PostScript Driver on the Windows clients. The output of this driver was not -always passed through the "pstops" filter on the CUPS/Samba side, and +always passed through the pstops filter on the CUPS/Samba side, and therefore was not counted correctly (the reason is that it often, -depending on the "PPD" being used, wrote a "PJL"-header in front of -the real PostScript which caused CUPS to skip pstops and go directly -to the "pstoraster" stage). -

    -From CUPS-1.1.16 onward you can use the "CUPS PostScript Driver for -Windows NT/2K/XP clients" (which is tagged in the download area of -http://www.cups.org/ as the "cups-samba-1.1.16.tar.gz" package). It does -not work for Win9x/ME clients. But it guarantees: -

    • to not write an PJL-header

    • to still read and support all PJL-options named in the -driver PPD with its own means

    • that the file will pass through the "pstops" filter -on the CUPS/Samba server

    • to page-count correctly the -printfile

    -You can read more about the setup of this combination in the manpage -for "cupsaddsmb" (which is only present with CUPS installed, and only +depending on the PPD being used, wrote a PJL-header in front of +the real PostScript which caused CUPS to skip pstops and go directly +to the pstoraster stage). +

    +From CUPS 1.1.16 onward, you can use the CUPS PostScript Driver for +Windows NT/200x/XP clients (which is tagged in the download area of +http://www.cups.org/ as the cups-samba-1.1.16.tar.gz +package). It does not work for Windows 9x/ME clients, but it guarantees: +

    • To not write a PJL-header.

    • To still read and support all PJL-options named in the +driver PPD with its own means.

    • That the file will pass through the pstops filter +on the CUPS/Samba server.

    • To page-count correctly the print file.

    +You can read more about the setup of this combination in the man page +for cupsaddsmb (which is only present with CUPS installed, and only current from CUPS 1.1.16). -

    The page_log File Syntax

    -These are the items CUPS logs in the "page_log" for every -single page of a job: -

    • Printer name

    • User name

    • Job ID

    • Time of printing

    • the page number

    • the number of copies

    • a billing information string -(optional)

    • the host which sent the job (included since version -1.1.19)

    -Here is an extract of my CUPS server's page_log file to illustrate the +

    The page_log File Syntax

    + +These are the items CUPS logs in the page_log for every +page of a job: +

    • Printer name

    • User name

    • Job ID

    • Time of printing

    • The page number

    • The number of copies

    • A billing information string (optional)

    • The host that sent the job (included since version 1.1.19)

    +Here is an extract of my CUPS server's page_log file to illustrate the format and included items:

    -infotec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 1 3 #marketing 10.160.50.13
    -infotec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 2 3 #marketing 10.160.50.13
    -infotec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 3 3 #marketing 10.160.50.13
    -infotec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 4 3 #marketing 10.160.50.13
    -DigiMaster9110 boss 402 [22/Apr/2003:10:33:22 +0100] 1 440 finance-dep 10.160.51.33
    -

    -This was job ID "401", printed on "infotec_IS2027" by user "kurt", a -64-page job printed in 3 copies and billed to "#marketing", sent -from IP address 10.160.50.13. The next job had ID "402", was sent by -user "boss" from IP address 10.160.51.33,printed from one page 440 -copies and is set to be billed to "finance-dep". -

    Possible Shortcomings

    +tec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 1 3 #marketing 10.160.50.13 +tec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 2 3 #marketing 10.160.50.13 +tec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 3 3 #marketing 10.160.50.13 +tec_IS2027 kurt 401 [22/Apr/2003:10:28:43 +0100] 4 3 #marketing 10.160.50.13 +Dig9110 boss 402 [22/Apr/2003:10:33:22 +0100] 1 440 finance-dep 10.160.51.33 +

    +This was job ID 401, printed on tec_IS2027 +by user kurt, a 64-page job printed in three copies and billed to +#marketing, sent from IP address 10.160.50.13. + The next job had ID 402, was sent by user boss +from IP address 10.160.51.33, printed from one page 440 copies and +is set to be billed to finance-dep. +

    Possible Shortcomings

    What flaws or shortcomings are there with this quota system? -

    • the ones named above (wrongly logged job in case of -printer hardware failure, etc.)

    • in reality, CUPS counts the job pages that are being +

      • The ones named above (wrongly logged job in case of +printer hardware failure, and so on).

      • In reality, CUPS counts the job pages that are being processed in software (that is, going through the -"RIP") rather than the physical sheets successfully leaving the -printing device. Thus if there is a jam while printing the 5th sheet out -of 1000 and the job is aborted by the printer, the "page count" will -still show the figure of 1000 for that job

      • all quotas are the same for all users (no flexibility -to give the boss a higher quota than the clerk), no support for -groups

      • no means to read out the current balance or the -"used-up" number of current quota

      • a user having used up 99 sheets of 100 quota will -still be able to send and print a 1,000 sheet job

      • a user being denied a job because of a filled-up quota -doesn't get a meaningful error message from CUPS other than -"client-error-not-possible".

    Future Developments

    +RIP) rather than the physical sheets successfully leaving the +printing device. Thus if there is a jam while printing the fifth sheet out +of a thousand and the job is aborted by the printer, the page count will +still show the figure of a thousand for that job.

  • All quotas are the same for all users (no flexibility +to give the boss a higher quota than the clerk) and no support for +groups.

  • No means to read out the current balance or the +“used-up” number of current quota.

  • A user having used up 99 sheets of a 100 quota will +still be able to send and print a thousand sheet job.

  • A user being denied a job because of a filled-up quota +does not get a meaningful error message from CUPS other than +“client-error-not-possible”.

  • Future Developments

    This is the best system currently available, and there are huge improvements under development for CUPS 1.2: -

    • page counting will go into the "backends" (these talk +

      • Page counting will go into the backends (these talk directly to the printer and will increase the count in sync with the -actual printing process: thus a jam at the 5th sheet will lead to a -stop in the counting)

      • quotas will be handled more flexibly

      • probably there will be support for users to inquire -their "accounts" in advance

      • probably there will be support for some other tools -around this topic

    Other Accounting Tools

    -PrintAnalyzer, pyKota, printbill, LogReport. -

    Additional Material

    +actual printing process; thus, a jam at the fifth sheet will lead to a +stop in the counting).

  • Quotas will be handled more flexibly.

  • Probably there will be support for users to inquire +about their accounts in advance.

  • Probably there will be support for some other tools +around this topic.

  • Additional Material

    A printer queue with no PPD associated to it is a -"raw" printer and all files will go directly there as received by the -spooler. The exceptions are file types "application/octet-stream" -which need "passthrough feature" enabled. "Raw" queues don't do any +“raw” printer and all files will go directly there as received by the +spooler. The exceptions are file types application/octet-stream +that need passthrough feature enabled. “Raw” queues do not do any filtering at all, they hand the file directly to the CUPS backend. -This backend is responsible for the sending of the data to the device -(as in the "device URI" notation: lpd://, socket://, -smb://, ipp://, http://, parallel:/, serial:/, usb:/ etc.) +This backend is responsible for sending the data to the device +(as in the “device URI” notation: lpd://, socket://, +smb://, ipp://, http://, parallel:/, serial:/, usb:/, and so on).

    -"cupsomatic"/Foomatic are not native CUPS drivers -and they don't ship with CUPS. They are a Third Party add-on, +cupsomatic/Foomatic are not native CUPS drivers +and they do not ship with CUPS. They are a third party add-on developed at Linuxprinting.org. As such, they are a brilliant hack to make all models (driven by Ghostscript drivers/filters in traditional spoolers) also work via CUPS, with the same (good or bad!) quality as -in these other spoolers. "cupsomatic" is only a vehicle to execute a -ghostscript commandline at that stage in the CUPS filtering chain, -where "normally" the native CUPS "pstoraster" filter would kick -in. cupsomatic by-passes pstoraster, "kidnaps" the printfile from CUPS -away and re-directs it to go through Ghostscript. CUPS accepts this, -because the associated CUPS-O-Matic-/Foomatic-PPD specifies: +in these other spoolers. cupsomatic is only a vehicle to execute a +Ghostscript commandline at that stage in the CUPS filtering chain, +where normally the native CUPS pstoraster filter would kick +in. cupsomatic bypasses pstoraster, kidnaps the printfile from CUPS +away and redirects it to go through Ghostscript. CUPS accepts this, +because the associated cupsomatic/foomatic-PPD specifies: +

       *cupsFilter:  "application/vnd.cups-postscript 0 cupsomatic"
     

    + This line persuades CUPS to hand the file to cupsomatic, once it has successfully converted it to the MIME type -"application/vnd.cups-postscript". This conversion will not happen for -Jobs arriving from Windows which are auto-typed -"application/octet-stream", with the according changes in +application/vnd.cups-postscript. This conversion will not happen for +Jobs arriving from Windows that are auto-typed +application/octet-stream, with the according changes in /etc/cups/mime.types in place.

    CUPS is widely configurable and flexible, even regarding its filtering mechanism. Another workaround in some situations would be to have in /etc/cups/mime.types entries as follows: +

      application/postscript           application/vnd.cups-raw  0  -
      application/vnd.cups-postscript  application/vnd.cups-raw  0  -
     

    -This would prevent all Postscript files from being filtered (rather, + +This would prevent all PostScript files from being filtered (rather, they will through the virtual nullfilter -denoted with "-"). This could only be useful for PS printers. If you +denoted with “-”). This could only be useful for PS printers. If you want to print PS code on non-PS printers (provided they support ASCII -text printing) an entry as follows could be useful: +text printing), an entry as follows could be useful: +

      */*           application/vnd.cups-raw  0  -
     

    + and would effectively send all files to the backend without further processing.

    -Lastly, you could have the following entry: +You could have the following entry: +

    -application/vnd.cups-postscript application/vnd.cups-raw 0 my_PJL_stripping_filter
    +application/vnd.cups-postscript application/vnd.cups-raw 0 \
    +	my_PJL_stripping_filter
     

    -You will need to write a my_PJL_stripping_filter -(could be a shellscript) that parses the PostScript and removes the -unwanted PJL. This would need to conform to CUPS filter design + +You will need to write a my_PJL_stripping_filter +(which could be a shell script) that parses the PostScript and removes the +unwanted PJL. This needs to conform to CUPS filter design (mainly, receive and pass the parameters printername, job-id, username, jobtitle, copies, print options and possibly the -filename). It would be installed as world executable into -/usr/lib/cups/filters/ and will be called by CUPS -if it encounters a MIME type "application/vnd.cups-postscript". +filename). It is installed as world executable into +/usr/lib/cups/filters/ and is called by CUPS +if it encounters a MIME type application/vnd.cups-postscript.

    -CUPS can handle -o job-hold-until=indefinite. -This keeps the job in the queue "on hold". It will only be printed +CUPS can handle -o job-hold-until=indefinite. +This keeps the job in the queue on hold. It will only be printed upon manual release by the printer operator. This is a requirement in -many "central reproduction departments", where a few operators manage +many central reproduction departments, where a few operators manage the jobs of hundreds of users on some big machine, where no user is allowed to have direct access (such as when the operators often need to load the proper paper type before running the 10,000 page job -requested by marketing for the mailing, etc.). -

    Auto-Deletion or Preservation of CUPS Spool Files

    -Samba print files pass through two "spool" directories. One is the -incoming directory managed by Samba, (set in the path = /var/spool/samba directive in the -[printers] section of +requested by marketing for the mailing, and so on). +

    Auto-Deletion or Preservation of CUPS Spool Files

    +Samba print files pass through two spool directories. One is the +incoming directory managed by Samba, (set in the +path = /var/spool/samba +directive in the [printers] section of smb.conf). The other is the spool directory of your UNIX print subsystem. For CUPS it is normally -/var/spool/cups/, as set by the cupsd.conf +/var/spool/cups/, as set by the cupsd.conf directive RequestRoot /var/spool/cups. -

    CUPS Configuration Settings explained

    +

    CUPS Configuration Settings Explained

    Some important parameter settings in the CUPS configuration file cupsd.conf are:

    PreserveJobHistory Yes

    This keeps some details of jobs in cupsd's mind (well it keeps the -"c12345", "c12346" etc. files in the CUPS spool directory, which do a +c12345, c12346, and so on, files in the CUPS spool directory, which do a similar job as the old-fashioned BSD-LPD control files). This is set -to "Yes" as a default. +to “Yes” as a default.

    PreserveJobFiles Yes

    This keeps the job files themselves in cupsd's mind -(well it keeps the "d12345", "d12346" etc. files in the CUPS spool -directory...). This is set to "No" as the CUPS +(it keeps the d12345, d12346 etc. files in the CUPS spool +directory). This is set to “No” as the CUPS default. -

    "MaxJobs 500"

    +

    MaxJobs 500

    This directive controls the maximum number of jobs that are kept in memory. Once the number of jobs reaches the limit, the oldest completed job is automatically purged from the system to make room for the new one. If all of the known jobs are still -pending or active then the new job will be rejected. Setting the +pending or active, then the new job will be rejected. Setting the maximum to 0 disables this functionality. The default setting is 0.

    -(There are also additional settings for "MaxJobsPerUser" and -"MaxJobsPerPrinter"...) -

    Pre-conditions

    +(There are also additional settings for MaxJobsPerUser and +MaxJobsPerPrinter...) +

    Pre-Conditions

    For everything to work as announced, you need to have three things: -

    • a Samba-smbd which is compiled against "libcups" (Check -on Linux by running "ldd `which smbd`")

    • a Samba-smb.conf setting of - printing = cups

    • another Samba-smb.conf setting of - printcap = cups

    Note

    -In this case all other manually set printing-related commands (like -print command, -lpq command, -lprm command, -lppause command or -lpresume command) are ignored and they should normally have no -influence what-so-ever on your printing. -

    Manual Configuration

    -If you want to do things manually, replace the printing = cups -by printing = bsd. Then your manually set commands may work -(haven't tested this), and a print command = lp -d %P %s; rm %s" +

    • A Samba-smbd that is compiled against libcups (check +on Linux by running ldd `which smbd').

    • A Samba-smb.conf setting of + printing = cups.

    • Another Samba-smb.conf setting of + printcap = cups.

    Note

    +In this case, all other manually set printing-related commands (like +print command, +lpq command, +lprm command, +lppause command or +lpresume command) are ignored and they should normally have no +influence whatsoever on your printing. +

    Manual Configuration

    +If you want to do things manually, replace the printing = cups +by printing = bsd. Then your manually set commands may work +(I haven't tested this), and a print command = lp -d %P %s; rm %s" may do what you need. -

    In Case of Trouble.....

    -If you have more problems, post the output of these commands -to the CUPS or Samba mailing lists (choose the one which seems more -relevant to your problem): -

    -$ grep -v ^# /etc/cups/cupsd.conf | grep -v ^$
    -$ grep -v ^# /etc/samba/smb.conf | grep -v ^$ | grep -v "^;"
    -

    -(adapt paths as needed). These commands leave out the empty -lines and lines with comments, providing the "naked settings" in a -compact way. Don't forget to name the CUPS and Samba versions you -are using! This saves bandwidth and makes for easier readability -for experts (and you are expecting experts to read them, right? -;-) -

    Printing from CUPS to Windows attached -Printers

    -From time to time the question arises, how you can print +

    Printing from CUPS to Windows Attached Printers

    +>From time to time the question arises, how can you print to a Windows attached printer -from Samba. Normally the local connection +from Samba? Normally the local connection from Windows host to printer would be done by USB or parallel -cable, but this doesn't matter to Samba. From here only an SMB +cable, but this does not matter to Samba. From here only an SMB connection needs to be opened to the Windows host. Of course, this -printer must be "shared" first. As you have learned by now, CUPS uses +printer must be shared first. As you have learned by now, CUPS uses backends to talk to printers and other -servers. To talk to Windows shared printers you need to use the -smb (surprise, surprise!) backend. Check if this -is in the CUPS backend directory. This resides usually in -/usr/lib/cups/backend/. You need to find a "smb" +servers. To talk to Windows shared printers, you need to use the +smb (surprise, surprise!) backend. Check if this +is in the CUPS backend directory. This usually resides in +/usr/lib/cups/backend/. You need to find an smb file there. It should be a symlink to smbspool -which file must exist and be executable: +and the file must exist and be executable:

     root# ls -l /usr/lib/cups/backend/
     total 253
    -drwxr-xr-x    3 root     root          720 Apr 30 19:04 .
    -drwxr-xr-x    6 root     root          125 Dec 19 17:13 ..
    --rwxr-xr-x    1 root     root        10692 Feb 16 21:29 canon
    --rwxr-xr-x    1 root     root        10692 Feb 16 21:29 epson
    -lrwxrwxrwx    1 root     root            3 Apr 17 22:50 http -> ipp
    --rwxr-xr-x    1 root     root        17316 Apr 17 22:50 ipp
    --rwxr-xr-x    1 root     root        15420 Apr 20 17:01 lpd
    --rwxr-xr-x    1 root     root         8656 Apr 20 17:01 parallel
    --rwxr-xr-x    1 root     root         2162 Mar 31 23:15 pdfdistiller
    -lrwxrwxrwx    1 root     root           25 Apr 30 19:04 ptal -> /usr/sbin/ptal-cups
    --rwxr-xr-x    1 root     root         6284 Apr 20 17:01 scsi
    -lrwxrwxrwx    1 root     root           17 Apr  2 03:11 smb -> /usr/bin/smbspool
    --rwxr-xr-x    1 root     root         7912 Apr 20 17:01 socket
    --rwxr-xr-x    1 root     root         9012 Apr 20 17:01 usb
    +drwxr-xr-x    3 root   root     720 Apr 30 19:04 .
    +drwxr-xr-x    6 root   root     125 Dec 19 17:13 ..
    +-rwxr-xr-x    1 root   root   10692 Feb 16 21:29 canon
    +-rwxr-xr-x    1 root   root   10692 Feb 16 21:29 epson
    +lrwxrwxrwx    1 root   root       3 Apr 17 22:50 http -> ipp
    +-rwxr-xr-x    1 root   root   17316 Apr 17 22:50 ipp
    +-rwxr-xr-x    1 root   root   15420 Apr 20 17:01 lpd
    +-rwxr-xr-x    1 root   root    8656 Apr 20 17:01 parallel
    +-rwxr-xr-x    1 root   root    2162 Mar 31 23:15 pdfdistiller
    +lrwxrwxrwx    1 root   root      25 Apr 30 19:04 ptal -> /usr/sbin/ptal-cups
    +-rwxr-xr-x    1 root   root    6284 Apr 20 17:01 scsi
    +lrwxrwxrwx    1 root   root      17 Apr  2 03:11 smb -> /usr/bin/smbspool
    +-rwxr-xr-x    1 root   root    7912 Apr 20 17:01 socket
    +-rwxr-xr-x    1 root   root    9012 Apr 20 17:01 usb
     
     root# ls -l `which smbspool`
    --rwxr-xr-x    1 root     root       563245 Dec 28 14:49 /usr/bin/smbspool
    +-rwxr-xr-x    1 root   root  563245 Dec 28 14:49 /usr/bin/smbspool
     

    -If this symlink doesn't exist, create it: +If this symlink does not exist, create it:

     root# ln -s `which smbspool` /usr/lib/cups/backend/smb
     

    -smbspool has been written by Mike Sweet from the CUPS folks. It is +smbspool has been written by Mike Sweet from the CUPS folks. It is included and ships with Samba. It may also be used with print subsystems other than CUPS, to spool jobs to Windows printer shares. To -set up printer "winprinter" on CUPS, you need to have a "driver" for +set up printer winprinter on CUPS, you need to have a driver for it. Essentially this means to convert the print data on the CUPS/Samba host to a format that the printer can digest (the Windows host is -unable to convert any files you may send). This also means you should +unable to convert any files you may send). This also means you should be able to print to the printer if it were hooked directly at your Samba/CUPS host. For troubleshooting purposes, this is what you -should do, to determine if that part of the process chain is in +should do to determine if that part of the process chain is in order. Then proceed to fix the network connection/authentication to -the Windows host, etc. +the Windows host, and so on.

    -To install a printer with the smb backend on CUPS, use this command: +To install a printer with the smb backend on CUPS, use this command:

     root# lpadmin -p winprinter -v smb://WINDOWSNETBIOSNAME/printersharename \
       -P /path/to/PPD
     

    -The PPD must be able to direct CUPS to generate -the print data for the target model. For PostScript printers just use +The PPD must be able to direct CUPS to generate +the print data for the target model. For PostScript printers, just use the PPD that would be used with the Windows NT PostScript driver. But what can you do if the printer is only accessible with a password? Or if the printer's host is part of another workgroup? This is provided -for: you can include the required parameters as part of the -smb:// device-URI. Like this: -

    • smb://WORKGROUP/WINDOWSNETBIOSNAME/printersharename

    • smb://username:password@WORKGROUP/WINDOWSNETBIOSNAME/printersharename

    • smb://username:password@WINDOWSNETBIOSNAME/printersharename

    +for: You can include the required parameters as part of the +smb:// device-URI like this: +

    • smb://WORKGROUP/WINDOWSNETBIOSNAME/printersharename
    • smb://username:password@WORKGROUP/WINDOWSNETBIOSNAME/printersharename
    • smb://username:password@WINDOWSNETBIOSNAME/printersharename

    Note that the device-URI will be visible in the process list of the -Samba server (e.g. when someone uses the ps -aux +Samba server (e.g., when someone uses the ps -aux command on Linux), even if the username and passwords are sanitized -before they get written into the log files. So this is an inherently -insecure option. However it is the only one. Don't use it if you want +before they get written into the log files. So this is an inherently +insecure option, however, it is the only one. Don't use it if you want to protect your passwords. Better share the printer in a way that -doesn't require a password! Printing will only work if you have a +does not require a password! Printing will only work if you have a working netbios name resolution up and running. Note that this is a -feature of CUPS and you don't necessarily need to have smbd running -(but who wants that? :-). -

    More CUPS filtering Chains

    +feature of CUPS and you do not necessarily need to have smbd running. + +

    More CUPS-Filtering Chains

    The following diagrams reveal how CUPS handles print jobs. -

    Figure 19.17. Filtering chain 1

    Filtering chain 1

    Figure 19.18. Filtering chain with cupsomatic

    Filtering chain with cupsomatic

    Note

    -Gimp-Print and some other 3rd-Party-Filters (like TurboPrint) to -CUPS and ESP PrintPro plug-in where rastertosomething is noted. -

    Common Errors

    Win9x client can't install driver

    For Win9x clients require the printer names to be 8 -chars (or "8 plus 3 chars suffix") max; otherwise the driver files -won't get transferred when you want to download them from -Samba.

    "cupsaddsmb" keeps asking for root password in - neverending loop

    Have you security = user? Have +

    Figure 19.17. Filtering chain 1.

    Filtering chain 1.

    Figure 19.18. Filtering chain with cupsomatic

    Filtering chain with cupsomatic

    Common Errors

    Windows 9x/ME Client Can't Install Driver

    For Windows 9x/ME, clients require the printer names to be eight +characters (or “8 plus 3 chars suffix”) max; otherwise, the driver files +will not get transferred when you want to download them from +Samba.

    cupsaddsmb” Keeps Asking for Root Password in Never-ending Loop

    Have you security = user? Have you used smbpasswd to give root a Samba account? -You can do 2 things: open another terminal and execute -smbpasswd -a root to create the account, and -continue with entering the password into the first terminal. Or break -out of the loop by hitting ENTER twice (without trying to type a -password).

    "cupsaddsmb" gives "No PPD file for printer..." - message while PPD file is present

    Have you enabled printer sharing on CUPS? This means: -do you have a <Location +You can do two things: open another terminal and execute +smbpasswd -a root to create the account and +continue entering the password into the first terminal. Or break +out of the loop by pressing ENTER twice (without trying to type a +password).

    cupsaddsmb” Errors

    + The use of “cupsaddsmb” gives “No PPD file for printer...” Message While PPD File Is Present. + What might the problem be? +

    Have you enabled printer sharing on CUPS? This means: +Do you have a <Location /printers>....</Location> section in CUPS -server's cupsd.conf which doesn't deny access to -the host you run "cupsaddsmb" from? It could be +server's cupsd.conf that does not deny access to +the host you run “cupsaddsmb” from? It could be an issue if you use cupsaddsmb remotely, or if you use it with a -h parameter: cupsaddsmb -H sambaserver -h cupsserver -v printername.

    Is your -"TempDir" directive in -cupsd.conf +TempDir directive in +cupsd.conf set to a valid value and is it writeable? -

    Client can't connect to Samba printer

    Use smbstatus to check which user +

    Client Can't Connect to Samba Printer

    Use smbstatus to check which user you are from Samba's point of view. Do you have the privileges to write into the [print$] -share?

    Can't reconnect to Samba under new account - from Win2K/XP

    Once you are connected as the "wrong" user (for -example as "nobody", which often occurs if you have -map to guest = bad user), Windows Explorer will not accept an -attempt to connect again as a different user. There won't be any byte +share?

    New Account Reconnection from Windows 200x/XP Troubles

    Once you are connected as the wrong user (for +example, as nobody, which often occurs if you have +map to guest = bad user), Windows Explorer will not accept an +attempt to connect again as a different user. There will not be any byte transfered on the wire to Samba, but still you'll see a stupid error -message which makes you think that Samba has denied access. Use +message that makes you think Samba has denied access. Use smbstatus to check for active connections. Kill the -PIDs. You still can't re-connect and get the dreaded +PIDs. You still can't re-connect and you get the dreaded You can't connect with a second account from the same -machine message, as soon as you are trying? And you -don't see any single byte arriving at Samba (see logs; use "ethereal") -indicating a renewed connection attempt? Shut all Explorer Windows. +machine message, as soon as you are trying. And you +do not see any single byte arriving at Samba (see logs; use “ethereal”) +indicating a renewed connection attempt. Shut all Explorer Windows. This makes Windows forget what it has cached in its memory as -established connections. Then re-connect as the right user. Best +established connections. Then reconnect as the right user. The best method is to use a DOS terminal window and first do net use z: \\GANDALF\print$ /user:root. Check with smbstatus that you are connected under a -different account. Now open the "Printers" folder (on the Samba server -in the Network Neighbourhood), right-click the +different account. Now open the Printers folder (on the Samba server +in the Network Neighborhood), right-click on the printer in question and select -Connect...

    Avoid being connected to the Samba server as the - "wrong" user

    You see per smbstatus that you are -connected as user "nobody"; while you wanted to be "root" or -"printeradmin"? This is probably due to -map to guest = bad user, which silently connects you under the guest account, +Connect...

    Avoid Being Connected to the Samba Server as the Wrong User

    You see per smbstatus that you are +connected as user nobody; while you want to be root or +printeradmin. This is probably due to +map to guest = bad user, which silently connects you under the guest account when you gave (maybe by accident) an incorrect username. Remove -map to guest, if you want to prevent -this.

    Upgrading to CUPS drivers from Adobe drivers on - NT/2K/XP clients gives problems

    First delete all "old" Adobe-using printers. Then -delete all "old" Adobe drivers. (On Win2K/XP, right-click in -background of "Printers" folder, select "Server Properties...", select -tab "Drivers" and delete here).

    Can't use "cupsaddsmb" on Samba server which is - a PDC

    Do you use the "naked" root user name? Try to do it +map to guest, if you want to prevent +this.

    Upgrading to CUPS Drivers from Adobe Drivers

    +This information came from a mailinglist posting regarding problems experienced when +upgrading from Adobe drivers to CUPS drivers on Microsoft Windows NT/200x/XP Clients. +

    First delete all old Adobe-using printers. Then +delete all old Adobe drivers. (On Windows 200x/XP, right-click in +the background of Printers folder, select Server Properties..., select +tab Drivers and delete here).

    Can't Use “cupsaddsmb” on Samba Server Which Is a PDC

    Do you use the “naked” root user name? Try to do it this way: cupsaddsmb -U DOMAINNAME\\root -v printername> (note the two backslashes: the first one is -required to "escape" the second one).

    Deleted Win2K printer driver is still shown

    Deleting a printer on the client won't delete the +required to “escape” the second one).

    Deleted Windows 200x Printer Driver Is Still Shown

    Deleting a printer on the client will not delete the driver too (to verify, right-click on the white background of the -"Printers" folder, select "Server Properties" and click on the -"Drivers" tab). These same old drivers will be re-used when you try to +Printers folder, select Server Properties and click on the +Drivers tab). These same old drivers will be re-used when you try to install a printer with the same name. If you want to update to a new driver, delete the old ones first. Deletion is only possible if no -other printer uses the same driver.

    Win2K/XP "Local Security - Policies"

    Local Security Policies may not -allow the installation of unsigned drivers. "Local Security Policies" +other printer uses the same driver.

    Windows 200x/XP "Local Security Policies"

    Local Security Policies may not +allow the installation of unsigned drivers. “Local Security Policies” may not allow the installation of printer drivers at -all.

    WinXP clients: "Administrator can not install - printers for all local users"

    Windows XP handles SMB printers on a "per-user" basis. +all.

    Administrator Cannot Install Printers for All Local Users

    Windows XP handles SMB printers on a “per-user” basis. This means every user needs to install the printer himself. To have a printer available for everybody, you might want to use the built-in IPP client capabilities of WinXP. Add a printer with the print path of -http://cupsserver:631/printers/printername. -Still looking into this one: maybe a "logon script" could +http://cupsserver:631/printers/printername. +We're still looking into this one. Maybe a logon script could automatically install printers for all -users.

    "Print Change Notify" functions on - NT-clients

    For "print change notify" functions on NT++ clients, -these need to run the "Server" service first (re-named to -File & Print Sharing for MS Networks in -XP).

    WinXP-SP1

    WinXP-SP1 introduced a Point and Print -Restriction Policy (this restriction doesn't apply to -"Administrator" or "Power User" groups of users). In Group Policy -Object Editor: go to User Configuration, - Administrative Templates, Control Panel, -Printers. The policy is automatically set to -Enabled and the Users can only Point -and Print to machines in their Forest . You probably need -to change it to Disabled or Users can -only Point and Print to these servers in order to make -driver downloads from Samba possible.

    Print options for all users can't be set on Win2K/XP

    How are you doing it? I bet the wrong way (it is not -very easy to find out, though). There are 3 different ways to bring +users.

    Print Change Notify Functions on NT-clients

    For print change, notify functions on NT++ clients. +These need to run the Server service first (renamed to +File & Print Sharing for MS Networks in +XP).

    WinXP-SP1

    WinXP-SP1 introduced a Point and Print Restriction Policy (this restriction does not apply to +“Administrator” or “Power User” groups of users). In Group Policy +Object Editor, go to User Configuration -> Administrative Templates -> + Control Panel -> Printers. The policy is automatically set to +Enabled and the Users can only Point +and Print to machines in their Forest . You probably need +to change it to Disabled or Users can +only Point and Print to these servers to make +driver downloads from Samba possible. +

    Print Options for All Users Can't Be Set on Windows 200x/XP

    How are you doing it? I bet the wrong way (it is not +easy to find out, though). There are three different ways to bring you to a dialog that seems to set everything. All -three dialogs look the same. Only one of them -does what you intend. You need to be -Administrator or Print Administrator to do this for all users. Here +three dialogs look the same, yet only one of them +does what you intend. You need to be +Administrator or Print Administrator to do this for all users. Here is how I do in on XP: -

    1. The first "wrong" way: +

      1. The first wrong way: -

        1. Open the Printers +

          1. Open the Printers folder.

          2. Right-click on the printer -(remoteprinter on cupshost) and -select in context menu Printing -Preferences...

          3. Look at this dialog closely and remember what it looks +(remoteprinter on cupshost) and +select in context menu Printing +Preferences...

          4. Look at this dialog closely and remember what it looks like.

          -

        2. The second "wrong" way: - -

          1. Open the Printers -folder.

          2. Right-click on the printer (remoteprinter on -cupshost) and select in the context menu -Properties

          3. Click on the General -tab

          4. Click on the button Printing -Preferences...

          5. A new dialog opens. Keep this dialog open and go back +

          6. The second wrong way: + +

            1. Open the Printers +folder.

            2. Right-click on the printer (remoteprinter on +cupshost) and select the context menu +Properties.

            3. Click on the General +tab.

            4. Click on the button Printing +Preferences...

            5. A new dialog opens. Keep this dialog open and go back to the parent dialog.

            -

          7. The third, the "correct" way: (should you do -this from the beginning, just carry out steps 1. and 2. from second -"way" above) - -

            1. Click on the Advanced -tab. (Hmmm... if everything is "Grayed Out", then you are not logged -in as a user with enough privileges).

            2. Click on the Printing -Defaults... button.

            3. On any of the two new tabs, click on the -Advanced... -button.

            4. A new dialog opens. Compare this one to the other, -identical looking one from "B.5" or A.3".

            +

          8. The third, and the correct way: + +

            1. Open the Printers +folder.

            2. Click on the Advanced +tab. (If everything is “grayed out,” then you are not logged +in as a user with enough privileges).

            3. Click on the Printing +Defaults... button.

            4. On any of the two new tabs, click on the +Advanced... +button.

            5. A new dialog opens. Compare this one to the other +identical looking one from “B.5” or A.3".

          -Do you see any difference? I don't either... However, only the last -one, which you arrived at with steps "C.1.-6." will save any settings +Do you see any difference? I don't either. However, only the last +one, which you arrived at with steps “C.1.-6.”, will save any settings permanently and be the defaults for new users. If you want all clients to get the same defaults, you need to conduct these steps as -Administrator (printer admin in +Administrator (printer admin in smb.conf) before a client downloads the driver (the clients can later set their own per-user defaults by following the -procedures A. or B. -above).

        Most common blunders in driver - settings on Windows clients

        Don't use Optimize for -Speed: use Optimize for -Portability instead (Adobe PS Driver) Don't use -Page Independence: No: always -settle with Page Independence: -Yes (Microsoft PS Driver and CUPS PS Driver for -WinNT/2K/XP) If there are problems with fonts: use -Download as Softfont into -printer (Adobe PS Driver). For -TrueType Download Options -choose Outline. Use PostScript -Level 2, if you are having trouble with a non-PS printer, and if -there is a choice.

        cupsaddsmb does not work - with newly installed printer

        Symptom: the last command of -cupsaddsmb doesn't complete successfully: +procedures A or B +above).

        Most Common Blunders in Driver Settings on Windows Clients

        Don't use Optimize for +Speed, but use Optimize for +Portability instead (Adobe PS Driver). Don't use +Page Independence: No: always +settle with Page Independence: +Yes (Microsoft PS Driver and CUPS PS Driver for +Windows NT/200x/XP). If there are problems with fonts, use +Download as Softfont into +printer (Adobe PS Driver). For +TrueType Download Options +choose Outline. Use PostScript +Level 2, if you are having trouble with a non-PS printer and if +there is a choice.

        cupsaddsmb Does Not Work with Newly Installed Printer

        Symptom: The last command of +cupsaddsmb does not complete successfully: cmd = setdriver printername printername result was NT_STATUS_UNSUCCESSFUL then possibly the printer was not yet -"recognized" by Samba. Did it show up in Network -Neighbourhood? Did it show up in rpcclient -hostname -c 'enumprinters'? Restart smbd (or send a +recognized by Samba. Did it show up in Network +Neighborhood? Did it show up i n rpcclient +hostname -c `enumprinters'? Restart smbd (or send a kill -HUP to all processes listed by smbstatus and try -again.

        Permissions on -/var/spool/samba/ get reset after each -reboot

        Have you by accident set the CUPS spool directory to -the same location? (RequestRoot -/var/spool/samba/ in cupsd.conf or +again.

        Permissions on /var/spool/samba/ Get Reset After Each Reboot

        Have you ever by accident set the CUPS spool directory to +the same location? (RequestRoot /var/spool/samba/ in cupsd.conf or the other way round: /var/spool/cups/ is set as -path> in the [printers] -section). These must be different. Set +path> in the [printers] +section). These must be different. Set + RequestRoot /var/spool/cups/ in -cupsd.conf and path = +cupsd.conf and path = /var/spool/samba in the [printers] section of smb.conf. Otherwise cupsd will -sanitize permissions to its spool directory with each restart, and -printing will not work reliably.

        Printer named "lp" -intermittently swallows jobs and spits out completely different -ones

        It is a very bad idea to name any printer "lp". This +sanitize permissions to its spool directory with each restart and +printing will not work reliably.

        Print Queue Called “lp” Mis-handles Print Jobs

        +In this case a print queue called “lp” intermittently swallows jobs and +spits out completely different ones from what was sent. +

        It is a bad idea to name any printer “lp”. This is the traditional UNIX name for the default printer. CUPS may be set -up to do an automatic creation of "Implicit Classes". This means, to +up to do an automatic creation of Implicit Classes. This means, to group all printers with the same name to a pool of devices, and -loadbalancing the jobs across them in a round-robin fashion. Chances -are high that someone else has an "lp" named printer too. You may +load-balancing the jobs across them in a round-robin fashion. Chances +are high that someone else has a printer named “lp” too. You may receive his jobs and send your own to his device unwittingly. To have tight control over the printer names, set BrowseShortNames -No. It will present any printer as "printername@cupshost" -then, giving you a better control over what may happen in a large -networked environment.

        Location of Adobe PostScript driver files necessary for "cupsaddsmb"

        Use smbclient to connect to any +No. It will present any printer as printername@cupshost +and then gives you better control over what may happen in a large +networked environment.

        Location of Adobe PostScript Driver Files for “cupsaddsmb

        Use smbclient to connect to any Windows box with a shared PostScript printer: smbclient //windowsbox/print\$ -U guest. You can navigate to the W32X86/2 subdir to mget ADOBE* -and other files or to WIN40/0 to do the same. -- +and other files or to WIN40/0 to do the same. Another option is to download the *.exe packaged -files from the Adobe website.

      An Overview of the CUPS Printing Processes

      Figure 19.19. CUPS Printing Overview

      CUPS Printing Overview

    Chapter 20. Stackable VFS modules

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Tim Potter

    Simo Sorce

    original vfs_skel README

    Alexander Bokovoy

    original vfs_netatalk docs

    Stefan Metzmacher

    Update for multiple modules

    Features and Benefits

    -Since Samba-3, there is support for stackable VFS(Virtual File System) modules. -Samba passes each request to access the unix file system thru the loaded VFS modules. -This chapter covers all the modules that come with the samba source and references to +files from the Adobe Web site.

    Overview of the CUPS Printing Processes

    A complete overview of the CUPS printing processes can be found in .

    Figure 19.19. CUPS printing overview.

    CUPS printing overview.


    [4] http://www.cups.org/cups-help.html

    Chapter 20. Stackable VFS modules

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Tim Potter

    Samba Team

    Simo Sorce

    original vfs_skel README

    Alexander Bokovoy

    original vfs_netatalk docs

    Stefan Metzmacher

    Update for multiple modules

    Features and Benefits

    +Since Samba-3, there is support for stackable VFS (Virtual File System) modules. +Samba passes each request to access the UNIX file system through the loaded VFS modules. +This chapter covers all the modules that come with the Samba source and references to some external modules. -

    Discussion

    +

    Discussion

    If not supplied with your platform distribution binary Samba package you may have problems -to compile these modules, as shared libraries are compiled and linked in different ways -on different systems. They currently have been tested against GNU/Linux and IRIX. +compiling these modules, as shared libraries are compiled and linked in different ways +on different systems. They currently have been tested against GNU/Linux and IRIX.

    -To use the VFS modules, create a share similar to the one below. The -important parameter is the vfs objects parameter where +To use the VFS modules, create a share similar to the one below. The +important parameter is the vfs objects parameter where you can list one or more VFS modules by name. For example, to log all access -to files and put deleted files in a recycle bin: +to files and put deleted files in a recycle bin, see . -

    Example 20.1. smb.conf with VFS modules

    [audit]
    comment = Audited /data directory
    path = /data
    vfs objects = audit recycle
    writeable = yes
    browseable = yes

    +

    Example 20.1. smb.conf with VFS modules

    [audit]
    comment = Audited /data directory
    path = /data
    vfs objects = audit recycle
    writeable = yes
    browseable = yes

    The modules are used in the order in which they are specified.

    -Samba will attempt to load modules from the lib -directory in the root directory of the samba installation (usually -/usr/lib/samba/vfs or /usr/local/samba/lib/vfs +Samba will attempt to load modules from the /lib directory in the root directory of the +Samba installation (usually /usr/lib/samba/vfs or /usr/local/samba/lib/vfs ).

    Some modules can be used twice for the same share. -This can be done using a configuration similar to the one below. +This can be done using a configuration similar to the one shown in . -

    Example 20.2. smb.conf with multiple VFS modules

    [test]
    comment = VFS TEST
    path = /data
    writeable = yes
    browseable = yes
    vfs objects = example:example1 example example:test
    example1: parameter = 1
    example: parameter = 5
    test: parameter = 7

    -

    Included modules

    audit

    +

    Example 20.2. smb.conf with multiple VFS modules

    [test]
    comment = VFS TEST
    path = /data
    writeable = yes
    browseable = yes
    vfs objects = example:example1 example example:test
    example1: parameter = 1
    example: parameter = 5
    test: parameter = 7

    +

    Included Modules

    audit

    A simple module to audit file access to the syslog - facility. The following operations are logged: -

    • share

    • connect/disconnect

    • directory opens/create/remove

    • file open/close/rename/unlink/chmod

    -

    extd_audit

    - This module is identical with the audit module above except - that it sends audit logs to both syslog as well as the smbd log file/s. The - loglevel for this module is set in the smb.conf file. + facility. The following operations are logged: +

    • share
    • connect/disconnect
    • directory opens/create/remove
    • file open/close/rename/unlink/chmod

    +

    extd_audit

    + This module is identical with the audit module above except + that it sends audit logs to both syslog as well as the smbd log files. The + log level for this module is set in the smb.conf file.

    - The logging information that will be written to the smbd log file is controlled by - the log level parameter in smb.conf. The - following information will be recorded: -

    Table 20.1. Extended Auditing Log Information

    Log LevelLog Details - File and Directory Operations
    0Creation / Deletion
    1Create / Delete / Rename / Permission Changes
    2Create / Delete / Rename / Perm Change / Open / Close

    fake_perms

    + Valid settings and the information that will be recorded are shown in . +

    Table 20.1. Extended Auditing Log Information

    Log LevelLog Details - File and Directory Operations
    0Creation / Deletion
    1Create / Delete / Rename / Permission Changes
    2Create / Delete / Rename / Perm Change / Open / Close

    fake_perms

    This module was created to allow Roaming Profile files and directories to be set (on the Samba server - under Unix) as read only. This module will if installed on the Profiles share will report to the client + under UNIX) as read only. This module will, if installed on the Profiles share, report to the client that the Profile files and directories are writable. This satisfies the client even though the files will never be overwritten as the client logs out or shuts down. -

    recycle

    - A recycle-bin like module. When used any unlink call - will be intercepted and files moved to the recycle - directory instead of being deleted. This gives the same - effect as the "Recycle Bin" on Windows computers. -

    Supported options: -

    recycle:repository

    Relative path of the directory where deleted files should be moved to

    recycle:keeptree

    Specifies whether the directory structure should - be kept or if the files in the directory that is being - deleted should be kept seperately in the recycle bin. -

    recycle:versions

    If this option is set, two files - with the same name that are deleted will both - be kept in the recycle bin. Newer deleted versions - of a file will be called "Copy #x of filename".

    recycle:touch

    Specifies whether a file's access - date should be touched when the file is moved to - the recycle bin.

    recycle:maxsize

    Files that are larger than the number - of bytes specified by this parameter will - not be put into the recycle bin.

    recycle:exclude

    List of files that should not - be put into the recycle bin when deleted, but deleted - in the regular way.

    recycle:exclude_dir

    Contains a list of directories. When files from - these directories are deleted, they are not put into the - recycle bin, but deleted in the regular way. -

    recycle:noversions

    Opposite of recycle:versions. If both options are specified, this one takes precedence.

    -

    netatalk

    - A netatalk module, that will ease co-existence of samba and - netatalk file sharing services. +

    recycle

    + A Recycle Bin-like module. Where used, unlink calls will be intercepted and files moved + to the recycle directory instead of being deleted. This gives the same effect as the + Recycle Bin on Windows computers. +

    + The Recycle Bin will not appear in Windows Explorer views of the network file system + (share) nor on any mapped drive. Instead, a directory called .recycle will be + automatically created when the first file is deleted. Users can recover files from the + .recycle directory. If the recycle:keeptree has been + specified, deleted files will be found in a path identical with that from which the file was deleted. +

    Supported options for the recycle module are as follow: +

    recycle:repository

    + Relative path of the directory where deleted files should be moved. +

    recycle:keeptree

    + Specifies whether the directory structure should be kept or if the files in the directory that is being + deleted should be kept seperately in the recycle bin. +

    recycle:versions

    + If this option is set, two files + with the same name that are deleted will both + be kept in the recycle bin. Newer deleted versions + of a file will be called “Copy #x of filename”. +

    recycle:touch

    + Specifies whether a file's access date should be touched when the file is moved to the recycle bin. +

    recycle:maxsize

    + Files that are larger than the number of bytes specified by this parameter will not be put into the recycle bin. +

    recycle:exclude

    + List of files that should not be put into the recycle bin when deleted, but deleted in the regular way. +

    recycle:exclude_dir

    + Contains a list of directories. When files from these directories are + deleted, they are not put into the + recycle bin but are deleted in the + regular way. +

    recycle:noversions

    + Opposite of recycle:versions. If both options are specified, this one takes precedence. +

    +

    netatalk

    + A netatalk module will ease co-existence of Samba and netatalk file sharing services.

    Advantages compared to the old netatalk module: -

    • it doesn't care about creating of .AppleDouble forks, just keeps them in sync

    • if a share in smb.conf doesn't contain .AppleDouble item in hide or veto list, it will be added automatically

    -

    VFS modules available elsewhere

    +

    • Does not care about creating .AppleDouble forks, just keeps them in sync.

    • If a share in smb.conf does not contain .AppleDouble item in hide or veto list, it will be added automatically.

    +

    VFS Modules Available Elsewhere

    This section contains a listing of various other VFS modules that -have been posted but don't currently reside in the Samba CVS -tree for one reason or another (e.g. it is easy for the maintainer +have been posted but do not currently reside in the Samba CVS +tree for one reason or another (e.g., it is easy for the maintainer to have his or her own CVS tree).

    No statements about the stability or functionality of any module should be implied due to its presence here. -

    DatabaseFS

    - URL: http://www.css.tayloru.edu/~elorimer/databasefs/index.php -

    By Eric Lorimer.

    - I have created a VFS module which implements a fairly complete read-only - filesystem. It presents information from a database as a filesystem in +

    DatabaseFS

    + URL: http://www.css.tayloru.edu/~elorimer/databasefs/index.php +

    By Eric Lorimer.

    + I have created a VFS module that implements a fairly complete read-only + filesystem. It presents information from a database as a filesystem in a modular and generic way to allow different databases to be used (originally designed for organizing MP3s under directories such as - "Artists," "Song Keywords," etc... I have since applied it to a student - roster database very easily). The directory structure is stored in the + “Artists,” “Song Keywords,” and so on. I have since easily + applied it to a student + roster database.) The directory structure is stored in the database itself and the module makes no assumptions about the database structure beyond the table it requires to run.

    Any feedback would be appreciated: comments, suggestions, patches, - etc... If nothing else, hopefully it might prove useful for someone + and so on. If nothing else, hopefully it might prove useful for someone else who wishes to create a virtual filesystem. -

    vscan

    URL: http://www.openantivirus.org/

    - samba-vscan is a proof-of-concept module for Samba, which +

    vscan

    URL: http://www.openantivirus.org/

    + samba-vscan is a proof-of-concept module for Samba, which uses the VFS (virtual file system) features of Samba 2.2.x/3.0 alphaX. Of course, Samba has to be compiled with VFS support. - samba-vscan supports various virus scanners and is maintained + samba-vscan supports various virus scanners and is maintained by Rainer Link. -

    Chapter 21. Winbind: Use of Domain Accounts

    Tim Potter

    Andrew Tridgell

    Samba Team

    Naag Mummaneni

    Notes for Solaris

    John Trostel

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    27 June 2002

    Features and Benefits

    Integration of UNIX and Microsoft Windows NT through a unified logon has - been considered a "holy grail" in heterogeneous computing environments for + been considered a “holy grail” in heterogeneous computing environments for a long time.

    There is one other facility without which UNIX and Microsoft Windows network @@ -11254,150 +11395,149 @@ should be implied due to its presence here. mechanism for sharing files across UNIX systems and to be able to assign domain user and group ownerships with integrity.

    - winbind is a component of the Samba suite of programs + winbind is a component of the Samba suite of programs that solves the unified logon problem. Winbind uses a UNIX implementation of Microsoft RPC calls, Pluggable Authentication Modules, and the Name Service Switch to allow Windows NT domain users to appear and operate as UNIX users on a UNIX - machine. This chapter describes the winbind system, explaining the functionality + machine. This chapter describes the Winbind system, explaining the functionality it provides, how it is configured, and how it works internally.

    Winbind provides three separate functions:

    • - Authentication of user credentials (via PAM) + Authentication of user credentials (via PAM).

    • - Identity resolution (via NSS)` + Identity resolution (via NSS).

    • - Windindd maintains a database called winbind_idmap.tdb in which it stores + Winbind maintains a database called winbind_idmap.tdb in which it stores mappings between UNIX UIDs / GIDs and NT SIDs. This mapping is used only for users and groups that do not have a local UID/GID. It stored the UID/GID allocated from the idmap uid/gid range that it has mapped to the NT SID. If idmap backend has been specified as ldapsam:url - then instead of using a local mapping winbindd will obtain this information + then instead of using a local mapping Winbind will obtain this information from the LDAP database.

    Note

    - If winbindd is not running, then smbd (which calls winbindd) will fall back to - using purely local information from /etc/passwd and /etc/group and no dynamic + If winbindd is not running, smbd (which calls winbindd) will fall back to + using purely local information from /etc/passwd and /etc/group and no dynamic mapping will be used. -

    Introduction

    It is well known that UNIX and Microsoft Windows NT have +

    Introduction

    It is well known that UNIX and Microsoft Windows NT have different models for representing user and group information and use different technologies for implementing them. This fact has made it difficult to integrate the two systems in a satisfactory manner.

    One common solution in use today has been to create identically named user accounts on both the UNIX and Windows systems and use the Samba suite of programs to provide file and print services - between the two. This solution is far from perfect however, as + between the two. This solution is far from perfect, however, as adding and deleting users on both sets of machines becomes a chore - and two sets of passwords are required both of which + and two sets of passwords are required both of which can lead to synchronization problems between the UNIX and Windows systems and confusion for users.

    We divide the unified logon problem for UNIX machines into - three smaller problems:

    • Obtaining Windows NT user and group information -

    • Authenticating Windows NT users -

    • Password changing for Windows NT users + three smaller problems:

      • Obtaining Windows NT user and group information. +

      • Authenticating Windows NT users. +

      • Password changing for Windows NT users.

      Ideally, a prospective solution to the unified logon problem would satisfy all the above components without duplication of information on the UNIX machines and without creating additional tasks for the system administrator when maintaining users and - groups on either system. The winbind system provides a simple + groups on either system. The Winbind system provides a simple and elegant solution to all three components of the unified logon - problem.

    What Winbind Provides

    Winbind unifies UNIX and Windows NT account management by - allowing a UNIX box to become a full member of a NT domain. Once + problem.

    What Winbind Provides

    Winbind unifies UNIX and Windows NT account management by + allowing a UNIX box to become a full member of an NT domain. Once this is done the UNIX box will see NT users and groups as if - they were native UNIX users and groups, allowing the NT domain + they were “native” UNIX users and groups, allowing the NT domain to be used in much the same manner that NIS+ is used within UNIX-only environments.

    The end result is that whenever any program on the UNIX machine asks the operating system to lookup a user or group name, the query will be resolved by asking the - NT domain controller for the specified domain to do the lookup. + NT Domain Controller for the specified domain to do the lookup. Because Winbind hooks into the operating system at a low level - (via the NSS name resolution modules in the C library) this - redirection to the NT domain controller is completely + (via the NSS name resolution modules in the C library), this + redirection to the NT Domain Controller is completely transparent.

    Users on the UNIX machine can then use NT user and group - names as they would use "native" UNIX names. They can chown files - so that they are owned by NT domain users or even login to the + names as they would “native” UNIX names. They can chown files + so they are owned by NT domain users or even login to the UNIX machine and run a UNIX X-Window session as a domain user.

    The only obvious indication that Winbind is being used is - that user and group names take the form DOMAIN\user and - DOMAIN\group. This is necessary as it allows Winbind to determine - that redirection to a domain controller is wanted for a particular + that user and group names take the form DOMAIN\user and + DOMAIN\group. This is necessary as it allows Winbind to determine + that redirection to a Domain Controller is wanted for a particular lookup and which trusted domain is being referenced.

    Additionally, Winbind provides an authentication service that hooks into the Pluggable Authentication Modules (PAM) system - to provide authentication via a NT domain to any PAM enabled + to provide authentication via an NT domain to any PAM-enabled applications. This capability solves the problem of synchronizing passwords between systems since all passwords are stored in a single - location (on the domain controller).

    Target Uses

    Winbind is targeted at organizations that have an - existing NT based domain infrastructure into which they wish + location (on the Domain Controller).

    Target Uses

    Winbind is targeted at organizations that have an + existing NT-based domain infrastructure into which they wish to put UNIX workstations or servers. Winbind will allow these organizations to deploy UNIX workstations without having to maintain a separate account infrastructure. This greatly simplifies the administrative overhead of deploying UNIX - workstations into a NT based organization.

    Another interesting way in which we expect Winbind to - be used is as a central part of UNIX based appliances. Appliances - that provide file and print services to Microsoft based networks + workstations into an NT-based organization.

    Another interesting way in which we expect Winbind to + be used is as a central part of UNIX-based appliances. Appliances + that provide file and print services to Microsoft-based networks will be able to use Winbind to provide seamless integration of - the appliance into the domain.

    How Winbind Works

    The winbind system is designed around a client/server + the appliance into the domain.

    How Winbind Works

    The Winbind system is designed around a client/server architecture. A long running winbindd daemon listens on a UNIX domain socket waiting for requests to arrive. These requests are generated by the NSS and PAM - clients and processed sequentially.

    The technologies used to implement winbind are described - in detail below.

    Microsoft Remote Procedure Calls

    Over the last few years, efforts have been underway + clients and is processed sequentially.

    The technologies used to implement Winbind are described + in detail below.

    Microsoft Remote Procedure Calls

    Over the last few years, efforts have been underway by various Samba Team members to decode various aspects of the Microsoft Remote Procedure Call (MSRPC) system. This - system is used for most network related operations between + system is used for most network-related operations between Windows NT machines including remote management, user authentication and print spooling. Although initially this work was done to aid the implementation of Primary Domain Controller (PDC) - functionality in Samba, it has also yielded a body of code which + functionality in Samba, it has also yielded a body of code that can be used for other purposes.

    Winbind uses various MSRPC calls to enumerate domain users and groups and to obtain detailed information about individual users or groups. Other MSRPC calls can be used to authenticate NT domain users and to change user passwords. By directly querying - a Windows PDC for user and group information, winbind maps the - NT account information onto UNIX user and group names.

    Microsoft Active Directory Services

    + a Windows PDC for user and group information, Winbind maps the + NT account information onto UNIX user and group names.

    Microsoft Active Directory Services

    Since late 2001, Samba has gained the ability to - interact with Microsoft Windows 2000 using its 'Native - Mode' protocols, rather than the NT4 RPC services. - Using LDAP and Kerberos, a domain member running - winbind can enumerate users and groups in exactly the - same way as a Win2k client would, and in so doing - provide a much more efficient and - effective winbind implementation. -

    Name Service Switch

    The Name Service Switch, or NSS, is a feature that is + interact with Microsoft Windows 2000 using its “Native + Mode” protocols, rather than the NT4 RPC services. + Using LDAP and Kerberos, a Domain Member running + Winbind can enumerate users and groups in exactly the + same way as a Windows 200x client would, and in so doing + provide a much more efficient and effective Winbind implementation. +

    Name Service Switch

    The Name Service Switch, or NSS, is a feature that is present in many UNIX operating systems. It allows system information such as hostnames, mail aliases and user information to be resolved from different sources. For example, a standalone UNIX workstation may resolve system information from a series of flat files stored on the local filesystem. A networked workstation may first attempt to resolve system information from local files, - and then consult a NIS database for user information or a DNS server - for hostname information.

    The NSS application programming interface allows winbind + and then consult an NIS database for user information or a DNS server + for hostname information.

    The NSS application programming interface allows Winbind to present itself as a source of system information when - resolving UNIX usernames and groups. Winbind uses this interface, + resolving UNIX usernames and groups. Winbind uses this interface, and information obtained from a Windows NT server using MSRPC - calls to provide a new source of account enumeration. Using standard + calls to provide a new source of account enumeration. Using standard UNIX library calls, one can enumerate the users and groups on - a UNIX machine running winbind and see all users and groups in + a UNIX machine running Winbind and see all users and groups in a NT domain plus any trusted domain as though they were local users and groups.

    The primary control file for NSS is /etc/nsswitch.conf. - When a UNIX application makes a request to do a lookup + When a UNIX application makes a request to do a lookup, the C library looks in /etc/nsswitch.conf - for a line which matches the service type being requested, for - example the "passwd" service type is used when user or group names - are looked up. This config line specifies which implementations + for a line that matches the service type being requested, for + example the “passwd” service type is used when user or group names + are looked up. This config line specifies which implementations of that service should be tried and in what order. If the passwd - config line is:

    -passwd: files example
    +		config line is:

    +		passwd: files example
     		

    then the C library will first load a module called /lib/libnss_files.so followed by the module /lib/libnss_example.so. The C library will dynamically load each of these modules in turn and call resolver functions within the modules to try to resolve - the request. Once the request is resolved the C library returns the - result to the application.

    This NSS interface provides a very easy way for Winbind + the request. Once the request is resolved, the C library returns the + result to the application.

    This NSS interface provides an easy way for Winbind to hook into the operating system. All that needs to be done is to put libnss_winbind.so in /lib/ - then add "winbind" into /etc/nsswitch.conf at + then add “winbind” into /etc/nsswitch.conf at the appropriate place. The C library will then call Winbind to - resolve user and group names.

    Pluggable Authentication Modules

    Pluggable Authentication Modules, also known as PAM, + resolve user and group names.

    Pluggable Authentication Modules

    Pluggable Authentication Modules, also known as PAM, is a system for abstracting authentication and authorization technologies. With a PAM module it is possible to specify different authentication methods for different system applications without @@ -11414,101 +11554,93 @@ passwd: files example

    PAM is configured by providing control files in the directory /etc/pam.d/ for each of the services that require authentication. When an authentication request is made - by an application the PAM code in the C library looks up this + by an application, the PAM code in the C library looks up this control file to determine what modules to load to do the authentication check and in what order. This interface makes adding - a new authentication service for Winbind very easy, all that needs + a new authentication service for Winbind very easy. All that needs to be done is that the pam_winbind.so module is copied to /lib/security/ and the PAM control files for relevant services are updated to allow - authentication via winbind. See the PAM documentation - for more details.

    User and Group ID Allocation

    When a user or group is created under Windows NT - is it allocated a numerical relative identifier (RID). This is - slightly different to UNIX which has a range of numbers that are + authentication via Winbind. See the PAM documentation + in for more information.

    User and Group ID Allocation

    When a user or group is created under Windows NT/200x + it is allocated a numerical relative identifier (RID). This is + slightly different from UNIX which has a range of numbers that are used to identify users, and the same range in which to identify - groups. It is winbind's job to convert RIDs to UNIX id numbers and - vice versa. When winbind is configured it is given part of the UNIX - user id space and a part of the UNIX group id space in which to + groups. It is Winbind's job to convert RIDs to UNIX ID numbers and + vice versa. When Winbind is configured, it is given part of the UNIX + user ID space and a part of the UNIX group ID space in which to store Windows NT users and groups. If a Windows NT user is - resolved for the first time, it is allocated the next UNIX id from + resolved for the first time, it is allocated the next UNIX ID from the range. The same process applies for Windows NT groups. Over - time, winbind will have mapped all Windows NT users and groups - to UNIX user ids and group ids.

    The results of this mapping are stored persistently in + time, Winbind will have mapped all Windows NT users and groups + to UNIX user IDs and group IDs.

    The results of this mapping are stored persistently in an ID mapping database held in a tdb database). This ensures that - RIDs are mapped to UNIX IDs in a consistent way.

    Result Caching

    An active system can generate a lot of user and group - name lookups. To reduce the network cost of these lookups winbind + RIDs are mapped to UNIX IDs in a consistent way.

    Result Caching

    + + An active system can generate a lot of user and group + name lookups. To reduce the network cost of these lookups, Winbind uses a caching scheme based on the SAM sequence number supplied - by NT domain controllers. User or group information returned - by a PDC is cached by winbind along with a sequence number also + by NT Domain Controllers. User or group information returned + by a PDC is cached by Winbind along with a sequence number also returned by the PDC. This sequence number is incremented by Windows NT whenever any user or group information is modified. If a cached entry has expired, the sequence number is requested from the PDC and compared against the sequence number of the cached entry. If the sequence numbers do not match, then the cached information - is discarded and up to date information is requested directly - from the PDC.

    Installation and Configuration

    Introduction

    -This section describes the procedures used to get winbind up and -running. Winbind is capable of providing access + is discarded and up-to-date information is requested directly + from the PDC.

    Installation and Configuration

    Introduction

    +This section describes the procedures used to get Winbind up and +running. Winbind is capable of providing access and authentication control for Windows Domain users through an NT -or Win2K PDC for 'regular' services, such as telnet a nd ftp, as -well for SAMBA services. +or Windows 200x PDC for regular services, such as telnet and ftp, as +well for Samba services.

    • - Why should I to this? -

      This allows the SAMBA administrator to rely on the - authentication mechanisms on the NT/Win2K PDC for the authentication - of domain members. NT/Win2K users no longer need to have separate - accounts on the SAMBA server. + Why should I do this? +

      This allows the Samba administrator to rely on the + authentication mechanisms on the Windows NT/200x PDC for the authentication + of Domain Members. Windows NT/200x users no longer need to have separate + accounts on the Samba server.

    • Who should be reading this document?

      - This HOWTO is designed for system administrators. If you are - implementing SAMBA on a file server and wish to (fairly easily) - integrate existing NT/Win2K users from your PDC onto the - SAMBA server, this HOWTO is for you. That said, I am no NT or PAM - expert, so you may find a better or easier way to accomplish - these tasks. -

    Requirements

    -If you have a Samba configuration file that you are currently -using... BACK IT UP! If your system already uses PAM, -back up the /etc/pam.d directory -contents! If you haven't already made a boot disk, -MAKE ONE NOW! -

    -Messing with the PAM configuration files can make it nearly impossible -to log in to your machine. That's why you want to be able to boot back -into your machine in single user mode and restore your -/etc/pam.d back to the original state they were in if -you get frustrated with the way things are going. ;-) -

    -The latest version of SAMBA (version 3.0 as of this writing), now -includes a functioning winbindd daemon. Please refer to the -main SAMBA web page or, -better yet, your closest SAMBA mirror site for instructions on -downloading the source code. -

    -To allow Domain users the ability to access SAMBA shares and -files, as well as potentially other services provided by your -SAMBA machine, PAM (pluggable authentication modules) must -be setup properly on your machine. In order to compile the -winbind modules, you should have at least the pam libraries resident -on your system. For recent RedHat systems (7.1, for instance), that -means pam-0.74-22. For best results, it is helpful to also -install the development packages in pam-devel-0.74-22. -

    Testing Things Out

    -Before starting, it is probably best to kill off all the SAMBA -related daemons running on your server. Kill off all smbd, -nmbd, and winbindd processes that may -be running. To use PAM, you will want to make sure that you have the -standard PAM package which supplies the /etc/pam.d -directory structure, including the pam modules are used by pam-aware -services, several pam libraries, and the /usr/doc -and /usr/man entries for pam. Winbind built better -in SAMBA if the pam-devel package was also installed. This package includes -the header files needed to compile pam-aware applications. -

    Configure nsswitch.conf and the -winbind libraries on Linux and Solaris

    -The libraries needed to run the winbindd daemon -through nsswitch need to be copied to their proper locations, so + This document is designed for system administrators. If you are + implementing Samba on a file server and wish to (fairly easily) + integrate existing Windows NT/200x users from your PDC onto the + Samba server, this document is for you. +

    Requirements

    +If you have a Samba configuration file that you are currently using, BACK IT UP! +If your system already uses PAM, back up the /etc/pam.d directory +contents! If you haven't already made a boot disk, MAKE ONE NOW! +

    +Messing with the PAM configuration files can make it nearly impossible to log in to your machine. That's +why you want to be able to boot back into your machine in single user mode and restore your +/etc/pam.d back to the original state they were in if you get frustrated with the +way things are going. +

    +The latest version of Samba-3 includes a functioning winbindd daemon. Please refer to the main Samba Web page or, better yet, your closest Samba mirror site for +instructions on downloading the source code. +

    +To allow domain users the ability to access Samba shares and files, as well as potentially other services +provided by your Samba machine, PAM must be set up properly on your +machine. In order to compile the Winbind modules, you should have at least the PAM development libraries installed +on your system. Please refer the PAM web site http://www.kernel.org/pub/linux/libs/pam/. +

    Testing Things Out

    +Before starting, it is probably best to kill off all the Samba-related daemons running on your server. +Kill off all smbd, nmbd, and winbindd processes that may be running. To use PAM, +make sure that you have the standard PAM package that supplies the /etc/pam.d +directory structure, including the PAM modules that are used by PAM-aware services, several pam libraries, +and the /usr/doc and /usr/man entries for pam. Winbind built +better in Samba if the pam-devel package is also installed. This package includes the header files +needed to compile PAM-aware applications. +

    Configure nsswitch.conf and the Winbind Libraries on Linux and Solaris

    +PAM is a standard component of most current generation UNIX/Linux systems. Unfortunately, few systems install +the pam-devel libraries that are needed to build PAM-enabled Samba. Additionally, Samba-3 +may auto-install the Winbind files into their correct locations on your system, so before you get too far down +the track be sure to check if the following configuration is really +necessary. You may only need to configure +/etc/nsswitch.conf. +

    +The libraries needed to run the winbindd daemon through nsswitch need to be copied to their proper locations:

     root# cp ../samba/source/nsswitch/libnss_winbind.so /lib
    @@ -11524,94 +11656,91 @@ I also found it necessary to make the following symbolic link:
     

    Now, as root you need to edit /etc/nsswitch.conf to allow user and group entries to be visible from the winbindd -daemon. My /etc/nsswitch.conf file look like +daemon. My /etc/nsswitch.conf file look like this after editing:

     	passwd:     files winbind
     	shadow:     files 
     	group:      files winbind
     

    -The libraries needed by the winbind daemon will be automatically +The libraries needed by the winbindd daemon will be automatically entered into the ldconfig cache the next time -your system reboots, but it -is faster (and you don't need to reboot) if you do it manually: +your system reboots, but it is faster (and you do not need to reboot) if you do it manually:

    root# /sbin/ldconfig -v | grep winbind

    This makes libnss_winbind available to winbindd and echos back a check to you. -

    NSS Winbind on AIX

    (This section is only for those running AIX)

    -The winbind AIX identification module gets built as libnss_winbind.so in the -nsswitch directory of the samba source. This file can be copied to -/usr/lib/security, and the AIX naming convention would indicate that it -should be named WINBIND. A stanza like the following: +

    NSS Winbind on AIX

    (This section is only for those running AIX.)

    +The Winbind AIX identification module gets built as libnss_winbind.so in the +nsswitch directory of the Samba source. This file can be copied to /usr/lib/security, +and the AIX naming convention would indicate that it should be named WINBIND. A stanza like the following:

     WINBIND:
             program = /usr/lib/security/WINBIND
             options = authonly
    -

    can then be added to -/usr/lib/security/methods.cfg. This module only -supports identification, but there have been success reports using the -standard winbind pam module for authentication. Use caution configuring -loadable authentication modules as it is possible to make it impossible -to logon to the system. More information about the AIX authentication -module API can be found at "Kernel Extensions and Device Support -Programming Concepts for AIX": -Chapter 18. Loadable Authentication Module Programming Interface -and more information on administering the modules at -"System Management Guide: Operating System and Devices". -

    Configure smb.conf

    -Several parameters are needed in the smb.conf file to control -the behavior of winbindd. Configure -smb.conf These are described in more detail in -the winbindd(8) man page. My -smb.conf file was modified to -include the following entries in the [global] section: -

    Example 21.1. smb.conf for winbind set-up

    [global]
    ...
    # separate domain and username with '+', like DOMAIN+username
    winbind separator = +
    # use uids from 10000 to 20000 for domain users
    idmap uid = 10000-20000
    # use gids from 10000 to 20000 for domain groups
    winbind gid = 10000-20000
    # allow enumeration of winbind users and groups
    winbind enum users = yes
    winbind enum groups = yes
    # give winbind users a real shell (only needed if they have telnet access)
    template homedir = /home/winnt/%D/%U
    template shell = /bin/bash

    Join the SAMBA server to the PDC domain

    -Enter the following command to make the SAMBA server join the +

    +can then be added to /usr/lib/security/methods.cfg. This module only supports +identification, but there have been success reports using the standard Winbind PAM module for +authentication. Use caution configuring loadable authentication +modules since you can make +it impossible to logon to the system. More information about the AIX authentication module API can +be found at “Kernel Extensions and Device Support Programming Concepts for AIX +in Chapter 18(John, there is no section like this in 18). Loadable Authentication Module Programming +Interface and more information on administering the modules +can be found at System +Management Guide: Operating System and Devices. +

    Configure smb.conf

    +Several parameters are needed in the smb.conf file to control the behavior of winbindd. These +are described in more detail in the winbindd(8) man page. My smb.conf file, as shown in , was modified to include the necessary entries in the [global] section. +

    Example 21.1. smb.conf for Winbind set-up

    [global]
    # separate domain and username with '+', like DOMAIN+username
    winbind separator = +
    # use uids from 10000 to 20000 for domain users
    idmap uid = 10000-20000
    # use gids from 10000 to 20000 for domain groups
    winbind gid = 10000-20000
    # allow enumeration of winbind users and groups
    winbind enum users = yes
    winbind enum groups = yes
    # give winbind users a real shell (only needed if they have telnet access)
    template homedir = /home/winnt/%D/%U
    template shell = /bin/bash

    Join the Samba Server to the PDC Domain

    +Enter the following command to make the Samba server join the PDC domain, where DOMAIN is the name of your Windows domain and Administrator is a domain user who has administrative privileges in the domain.

    root# /usr/local/samba/bin/net rpc join -S PDC -U Administrator

    -The proper response to the command should be: "Joined the domain -DOMAIN" where DOMAIN +The proper response to the command should be: “Joined the domain +DOMAIN” where DOMAIN is your DOMAIN name. -

    Start up the winbindd daemon and test it!

    -Eventually, you will want to modify your smb startup script to +

    Starting and Testing the winbindd Daemon

    +Eventually, you will want to modify your Samba startup script to automatically invoke the winbindd daemon when the other parts of -SAMBA start, but it is possible to test out just the winbind -portion first. To start up winbind services, enter the following +Samba start, but it is possible to test out just the Winbind +portion first. To start up Winbind services, enter the following command as root:

    root# /usr/local/samba/bin/winbindd -

    -Winbindd can now also run in 'dual daemon mode'. This will make it -run as 2 processes. The first will answer all requests from the cache, +

    Note

    +The above assumes that Samba has been installed in the /usr/local/samba +directory tree. You may need to search for the location of Samba files if this is not the +location of winbindd on your system. +

    +Winbindd can now also run in “dual daemon modei”. This will make it +run as two processes. The first will answer all requests from the cache, thus making responses to clients faster. The other will update the cache for the query that the first has just responded. -Advantage of this is that responses stay accurate and are faster. +The advantage of this is that responses stay accurate and are faster. You can enable dual daemon mode by adding -B to the commandline:

    root# /usr/local/samba/bin/winbindd -B

    -I'm always paranoid and like to make sure the daemon -is really running... +I'm always paranoid and like to make sure the daemon is really running.

    root# ps -ae | grep winbindd

    -This command should produce output like this, if the daemon is running +This command should produce output like this, if the daemon is running you would expect +to see a report something like this:

     3025 ?        00:00:00 winbindd
     

    -Now... for the real test, try to get some information about the -users on your PDC +Now, for the real test, try to get some information about the users on your PDC:

    root# /usr/local/samba/bin/wbinfo -u

    This should echo back a list of users on your Windows users on -your PDC. For example, I get the following response: +your PDC. For example, I get the following response:

     	CEO+Administrator
     	CEO+burdell
    @@ -11620,10 +11749,9 @@ your PDC.  For example, I get the following response:
     	CEO+krbtgt
     	CEO+TsInternetUser
     

    - Obviously, I have named my domain 'CEO' and my winbind separator is '+'. +Obviously, I have named my domain “CEO” and my winbind separator is “+”.

    -You can do the same sort of thing to get group information from -the PDC: +You can do the same sort of thing to get group information from the PDC:

     root# /usr/local/samba/bin/wbinfo -g
     	CEO+Domain Admins
    @@ -11636,28 +11764,26 @@ the PDC:
     	CEO+Enterprise Admins
     	CEO+Group Policy Creator Owners
     

    -The function 'getent' can now be used to get unified -lists of both local and PDC users and groups. -Try the following command: +The function getent can now be used to get unified +lists of both local and PDC users and groups. Try the following command:

    root# getent passwd

    You should get a list that looks like your /etc/passwd -list followed by the domain users with their new uids, gids, home +list followed by the domain users with their new UIDs, GIDs, home directories and default shells.

    -The same thing can be done for groups with the command +The same thing can be done for groups with the command:

    root# getent group -

    Fix the init.d startup scripts

    Linux

    -The winbindd daemon needs to start up after the -smbd and nmbd daemons are running. +

    Fix the init.d Startup Scripts

    Linux

    +The winbindd daemon needs to start up after the smbd and nmbd daemons are running. To accomplish this task, you need to modify the startup scripts of your system. -They are located at /etc/init.d/smb in RedHat and -/etc/init.d/samba in Debian. -script to add commands to invoke this daemon in the proper sequence. My +They are located at /etc/init.d/smb in Red Hat Linux and they are located in +/etc/init.d/samba in Debian Linux. Edit your +script to add commands to invoke this daemon in the proper sequence. My startup script starts up smbd, nmbd, and winbindd from the -/usr/local/samba/bin directory directly. The 'start' +/usr/local/samba/bin directory directly. The start function in the script looks like this:

     start() {
    @@ -11681,7 +11807,7 @@ start() {
             return $RETVAL
     }
     

    If you would like to run winbindd in dual daemon mode, replace -the line +the line :

             daemon /usr/local/samba/bin/winbindd
     

    @@ -11692,7 +11818,7 @@ in the example above with: daemon /usr/local/samba/bin/winbindd -B

    .

    -The 'stop' function has a corresponding entry to shut down the +The stop function has a corresponding entry to shut down the services and looks like this:

     stop() {
    @@ -11715,11 +11841,12 @@ stop() {
             echo ""
             return $RETVAL
     }
    -
    Solaris

    Winbind doesn't work on Solaris 9, see the Portability chapter for details.

    On Solaris, you need to modify the -/etc/init.d/samba.server startup script. It usually -only starts smbd and nmbd but should now start winbindd too. If you -have samba installed in /usr/local/samba/bin, -the file could contains something like this: +

    Solaris

    +Winbind does not work on Solaris 9, see for details. +

    +On Solaris, you need to modify the /etc/init.d/samba.server startup script. It +usually only starts smbd and nmbd but should now start winbindd, too. If you have Samba installed in +/usr/local/samba/bin, the file could contains something like this:

     	##
     	## samba.server
    @@ -11737,7 +11864,7 @@ the file could contains something like this:
     		[ "$pid" != "" ] && kill $pid
     	}
     	 
    -	# Start/stop processes required for samba server
    +	# Start/stop processes required for Samba server
     
     	case "$1" in
     
    @@ -11768,336 +11895,365 @@ the file could contains something like this:
     	   ;;
     	esac
     

    -Again, if you would like to run samba in dual daemon mode, replace +Again, if you would like to run Samba in dual daemon mode, replace:

     	/usr/local/samba/bin/winbindd
     

    - in the script above with: -

     	/usr/local/samba/bin/winbindd -B
     

    -

    Restarting

    +

    Restarting

    If you restart the smbd, nmbd, and winbindd daemons at this point, you -should be able to connect to the samba server as a domain member just as +should be able to connect to the Samba server as a Domain Member just as if you were a local user. -

    Configure Winbind and PAM

    -If you have made it this far, you know that winbindd and samba are working -together. If you want to use winbind to provide authentication for other -services, keep reading. The pam configuration files need to be altered in -this step. (Did you remember to make backups of your original +

    Configure Winbind and PAM

    +If you have made it this far, you know that winbindd and Samba are working +together. If you want to use Winbind to provide authentication for other +services, keep reading. The PAM configuration files need to be altered in +this step. (Did you remember to make backups of your original /etc/pam.d files? If not, do it now.)

    -You will need a pam module to use winbindd with these other services. This +You will need a PAM module to use winbindd with these other services. This module will be compiled in the ../source/nsswitch directory -by invoking the command +by invoking the command:

    root# make nsswitch/pam_winbind.so

    -from the ../source directory. The +from the ../source directory. The pam_winbind.so file should be copied to the location of -your other pam security modules. On my RedHat system, this was the -/lib/security directory. On Solaris, the pam security +your other PAM security modules. On my RedHat system, this was the +/lib/security directory. On Solaris, the PAM security modules reside in /usr/lib/security.

    root# cp ../samba/source/nsswitch/pam_winbind.so /lib/security -

    Linux/FreeBSD-specific PAM configuration

    +

    Linux/FreeBSD-specific PAM configuration

    The /etc/pam.d/samba file does not need to be changed. I just left this file as it was:

     	auth    required        /lib/security/pam_stack.so service=system-auth
     	account required        /lib/security/pam_stack.so service=system-auth
     

    -The other services that I modified to allow the use of winbind +The other services that I modified to allow the use of Winbind as an authentication service were the normal login on the console (or a terminal -session), telnet logins, and ftp service. In order to enable these +session), telnet logins, and ftp service. In order to enable these services, you may first need to change the entries in -/etc/xinetd.d (or /etc/inetd.conf). -RedHat 7.1 uses the new xinetd.d structure, in this case you need +/etc/xinetd.d (or /etc/inetd.conf). +Red Hat Linux 7.1 and later uses the new xinetd.d structure, in this case you need to change the lines in /etc/xinetd.d/telnet and /etc/xinetd.d/wu-ftp from

     	enable = no
     

    -to +to:

     	enable = yes
     

    For ftp services to work properly, you will also need to either have individual directories for the domain users already present on the server, or change the home directory template to a general -directory for all domain users. These can be easily set using +directory for all domain users. These can be easily set using the smb.conf global entry -template homedir. +template homedir.

    The /etc/pam.d/ftp file can be changed -to allow winbind ftp access in a manner similar to the -samba file. My /etc/pam.d/ftp file was +to allow Winbind ftp access in a manner similar to the +samba file. My /etc/pam.d/ftp file was changed to look like this:

    -	auth       required     /lib/security/pam_listfile.so item=user sense=deny \
    -		 file=/etc/ftpusers onerr=succeed
    -	auth       sufficient   /lib/security/pam_winbind.so
    -	auth       required     /lib/security/pam_stack.so service=system-auth
    -	auth       required     /lib/security/pam_shells.so
    -	account    sufficient   /lib/security/pam_winbind.so
    -	account    required     /lib/security/pam_stack.so service=system-auth
    -	session    required     /lib/security/pam_stack.so service=system-auth
    +auth       required     /lib/security/pam_listfile.so item=user sense=deny \
    +	 file=/etc/ftpusers onerr=succeed
    +auth       sufficient   /lib/security/pam_winbind.so
    +auth       required     /lib/security/pam_stack.so service=system-auth
    +auth       required     /lib/security/pam_shells.so
    +account    sufficient   /lib/security/pam_winbind.so
    +account    required     /lib/security/pam_stack.so service=system-auth
    +session    required     /lib/security/pam_stack.so service=system-auth
     

    The /etc/pam.d/login file can be changed nearly the -same way. It now looks like this: +same way. It now looks like this:

    -	auth       required     /lib/security/pam_securetty.so
    -	auth       sufficient   /lib/security/pam_winbind.so
    -	auth       sufficient   /lib/security/pam_unix.so use_first_pass
    -	auth       required     /lib/security/pam_stack.so service=system-auth
    -	auth       required     /lib/security/pam_nologin.so
    -	account    sufficient   /lib/security/pam_winbind.so
    -	account    required     /lib/security/pam_stack.so service=system-auth
    -	password   required     /lib/security/pam_stack.so service=system-auth
    -	session    required     /lib/security/pam_stack.so service=system-auth
    -	session    optional     /lib/security/pam_console.so
    +auth       required     /lib/security/pam_securetty.so
    +auth       sufficient   /lib/security/pam_winbind.so
    +auth       sufficient   /lib/security/pam_UNIX.so use_first_pass
    +auth       required     /lib/security/pam_stack.so service=system-auth
    +auth       required     /lib/security/pam_nologin.so
    +account    sufficient   /lib/security/pam_winbind.so
    +account    required     /lib/security/pam_stack.so service=system-auth
    +password   required     /lib/security/pam_stack.so service=system-auth
    +session    required     /lib/security/pam_stack.so service=system-auth
    +session    optional     /lib/security/pam_console.so
     

    In this case, I added the

    auth sufficient /lib/security/pam_winbind.so

    lines as before, but also added the

    required pam_securetty.so

    -above it, to disallow root logins over the network. I also added a +above it, to disallow root logins over the network. I also added a

    sufficient /lib/security/pam_unix.so use_first_pass

    line after the winbind.so line to get rid of annoying double prompts for passwords. -

    Solaris-specific configuration

    -The /etc/pam.conf needs to be changed. I changed this file so that my Domain -users can logon both locally as well as telnet.The following are the changes -that I made.You can customize the pam.conf file as per your requirements,but +

    Solaris-specific configuration

    +The /etc/pam.conf needs to be changed. I changed this file so my Domain +users can logon both locally as well as telnet. The following are the changes +that I made. You can customize the pam.conf file as per your requirements, but be sure of those changes because in the worst case it will leave your system nearly impossible to boot.

    -	#
    -	#ident	"@(#)pam.conf	1.14	99/09/16 SMI"
    -	#
    -	# Copyright (c) 1996-1999, Sun Microsystems, Inc.
    -	# All Rights Reserved.
    -	#
    -	# PAM configuration
    -	#
    -	# Authentication management
    -	#
    -	login   auth required   /usr/lib/security/pam_winbind.so
    -	login	auth required 	/usr/lib/security/$ISA/pam_unix.so.1 try_first_pass 
    -	login	auth required 	/usr/lib/security/$ISA/pam_dial_auth.so.1 try_first_pass 
    -	#
    -	rlogin  auth sufficient /usr/lib/security/pam_winbind.so
    -	rlogin  auth sufficient /usr/lib/security/$ISA/pam_rhosts_auth.so.1
    -	rlogin	auth required 	/usr/lib/security/$ISA/pam_unix.so.1 try_first_pass
    -	#
    -	dtlogin auth sufficient /usr/lib/security/pam_winbind.so
    -	dtlogin	auth required 	/usr/lib/security/$ISA/pam_unix.so.1 try_first_pass
    -	#
    -	rsh	auth required	/usr/lib/security/$ISA/pam_rhosts_auth.so.1
    -	other   auth sufficient /usr/lib/security/pam_winbind.so
    -	other	auth required	/usr/lib/security/$ISA/pam_unix.so.1 try_first_pass
    -	#
    -	# Account management
    -	#
    -	login   account sufficient      /usr/lib/security/pam_winbind.so
    -	login	account requisite	/usr/lib/security/$ISA/pam_roles.so.1 
    -	login	account required	/usr/lib/security/$ISA/pam_unix.so.1 
    -	#
    -	dtlogin account sufficient      /usr/lib/security/pam_winbind.so
    -	dtlogin	account requisite	/usr/lib/security/$ISA/pam_roles.so.1 
    -	dtlogin	account required	/usr/lib/security/$ISA/pam_unix.so.1 
    -	#
    -	other   account sufficient      /usr/lib/security/pam_winbind.so
    -	other	account requisite	/usr/lib/security/$ISA/pam_roles.so.1 
    -	other	account required	/usr/lib/security/$ISA/pam_unix.so.1 
    -	#
    -	# Session management
    -	#
    -	other	session required	/usr/lib/security/$ISA/pam_unix.so.1 
    -	#
    -	# Password management
    -	#
    -	#other   password sufficient     /usr/lib/security/pam_winbind.so
    -	other	password required	/usr/lib/security/$ISA/pam_unix.so.1 
    -	dtsession auth required	/usr/lib/security/$ISA/pam_unix.so.1
    -	#
    -	# Support for Kerberos V5 authentication (uncomment to use Kerberos)
    -	#
    -	#rlogin	auth optional	/usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
    -	#login	auth optional	/usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
    -	#dtlogin	auth optional	/usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
    -	#other	auth optional	/usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
    -	#dtlogin	account optional /usr/lib/security/$ISA/pam_krb5.so.1
    -	#other	account optional /usr/lib/security/$ISA/pam_krb5.so.1
    -	#other	session optional /usr/lib/security/$ISA/pam_krb5.so.1
    -	#other	password optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
    -

    -I also added a try_first_pass line after the winbind.so line to get rid of -annoying double prompts for passwords. +# +#ident "@(#)pam.conf 1.14 99/09/16 SMI" +# +# Copyright (c) 1996-1999, Sun Microsystems, Inc. +# All Rights Reserved. +# +# PAM configuration +# +# Authentication management +# +login auth required /usr/lib/security/pam_winbind.so +login auth required /usr/lib/security/$ISA/pam_UNIX.so.1 try_first_pass +login auth required /usr/lib/security/$ISA/pam_dial_auth.so.1 try_first_pass +# +rlogin auth sufficient /usr/lib/security/pam_winbind.so +rlogin auth sufficient /usr/lib/security/$ISA/pam_rhosts_auth.so.1 +rlogin auth required /usr/lib/security/$ISA/pam_UNIX.so.1 try_first_pass +# +dtlogin auth sufficient /usr/lib/security/pam_winbind.so +dtlogin auth required /usr/lib/security/$ISA/pam_UNIX.so.1 try_first_pass +# +rsh auth required /usr/lib/security/$ISA/pam_rhosts_auth.so.1 +other auth sufficient /usr/lib/security/pam_winbind.so +other auth required /usr/lib/security/$ISA/pam_UNIX.so.1 try_first_pass +# +# Account management +# +login account sufficient /usr/lib/security/pam_winbind.so +login account requisite /usr/lib/security/$ISA/pam_roles.so.1 +login account required /usr/lib/security/$ISA/pam_UNIX.so.1 +# +dtlogin account sufficient /usr/lib/security/pam_winbind.so +dtlogin account requisite /usr/lib/security/$ISA/pam_roles.so.1 +dtlogin account required /usr/lib/security/$ISA/pam_UNIX.so.1 +# +other account sufficient /usr/lib/security/pam_winbind.so +other account requisite /usr/lib/security/$ISA/pam_roles.so.1 +other account required /usr/lib/security/$ISA/pam_UNIX.so.1 +# +# Session management +# +other session required /usr/lib/security/$ISA/pam_UNIX.so.1 +# +# Password management +# +#other password sufficient /usr/lib/security/pam_winbind.so +other password required /usr/lib/security/$ISA/pam_UNIX.so.1 +dtsession auth required /usr/lib/security/$ISA/pam_UNIX.so.1 +# +# Support for Kerberos V5 authentication (uncomment to use Kerberos) +# +#rlogin auth optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass +#login auth optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass +#dtlogin auth optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass +#other auth optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass +#dtlogin account optional /usr/lib/security/$ISA/pam_krb5.so.1 +#other account optional /usr/lib/security/$ISA/pam_krb5.so.1 +#other session optional /usr/lib/security/$ISA/pam_krb5.so.1 +#other password optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass +

    +I also added a try_first_pass line after the winbind.so +line to get rid of annoying double prompts for passwords.

    Now restart your Samba and try connecting through your application that you configured in the pam.conf. -

    Conclusion

    The winbind system, through the use of the Name Service - Switch, Pluggable Authentication Modules, and appropriate - Microsoft RPC calls have allowed us to provide seamless - integration of Microsoft Windows NT domain users on a - UNIX system. The result is a great reduction in the administrative - cost of running a mixed UNIX and NT network.

    Common Errors

    Winbind has a number of limitations in its current +

    Conclusion

    The Winbind system, through the use of the Name Service +Switch, Pluggable Authentication Modules, and appropriate +Microsoft RPC calls have allowed us to provide seamless +integration of Microsoft Windows NT domain users on a +UNIX system. The result is a great reduction in the administrative +cost of running a mixed UNIX and NT network.

    Common Errors

    Winbind has a number of limitations in its current released version that we hope to overcome in future releases:

    • Winbind is currently only available for - the Linux, Solaris, AIX and IRIX operating systems, although ports to other operating + the Linux, Solaris, AIX, and IRIX operating systems, although ports to other operating systems are certainly possible. For such ports to be feasible, we require the C library of the target operating system to support the Name Service Switch and Pluggable Authentication Modules systems. This is becoming more common as NSS and - PAM gain support among UNIX vendors.

    • The mappings of Windows NT RIDs to UNIX ids + PAM gain support among UNIX vendors.

    • The mappings of Windows NT RIDs to UNIX IDs is not made algorithmically and depends on the order in which - unmapped users or groups are seen by winbind. It may be difficult - to recover the mappings of rid to UNIX id mapping if the file - containing this information is corrupted or destroyed.

    • Currently the winbind PAM module does not take + unmapped users or groups are seen by Winbind. It may be difficult + to recover the mappings of RID to UNIX ID mapping if the file + containing this information is corrupted or destroyed.

    • Currently the Winbind PAM module does not take into account possible workstation and logon time restrictions - that may be been set for Windows NT users, this is - instead up to the PDC to enforce.

    NSCD Problem Warning

    Note

    - Do NOT under ANY circumstances run nscd on any system - on which winbind is running. + that may be set for Windows NT users, this is + instead up to the PDC to enforce.

    NSCD Problem Warning

    Warning

    + Do not under any circumstances run nscd on any system + on which winbindd is running.

    If nscd is running on the UNIX/Linux system, then - even though NSSWITCH is correctly configured it will NOT be possible to resolve + even though NSSWITCH is correctly configured it will not be possible to resolve domain users and groups for file and directory controls. -

    Winbind Is Not Resolving Users and Groups

    + My smb.conf file is correctly configured. I have specified + idmap uid = 12000, + and idmap gid = 3000-3500 + and winbind is running. When I do the following it all works fine. +

    +root# wbinfo -u
    +MIDEARTH+maryo
    +MIDEARTH+jackb
    +MIDEARTH+ameds
    +...
    +MIDEARTH+root
    +
    +root# wbinfo -g
    +MIDEARTH+Domain Users
    +MIDEARTH+Domain Admins
    +MIDEARTH+Domain Guests
    +...
    +MIDEARTH+Accounts
    +
    +root# getent passwd
    +root:x:0:0:root:/root:/bin/bash
    +bin:x:1:1:bin:/bin:/bin/bash
    +...
    +maryo:x:15000:15003:Mary Orville:/home/MIDEARTH/maryo:/bin/false
    +

    +But the following command just fails: +

    +root# chown maryo a_file
    +chown: `maryo': invalid user
    +
    +This is driving me nuts! What can be wrong? +”

    +Same problem as the one above. +Your system is likely running nscd, the name service +caching daemon. Shut it down, do not restart it! You will find your problem resolved. +

    Chapter 22. Advanced Network Management

    John H. Terpstra

    Samba Team

    April 3 2003

    This section documents peripheral issues that are of great importance to network administrators who want to improve network resource access control, to automate the user -environment, and to make their lives a little easier. -

    Features and Benefits

    +environment and to make their lives a little easier. +

    Features and Benefits

    Often the difference between a working network environment and a well appreciated one can -best be measured by the little things that makes everything work more -harmoniously. A key part of every network environment solution is the ability to remotely -manage MS Windows workstations, to remotely access the Samba server, to provide customised -logon scripts, as well as other house keeping activities that help to sustain more reliable +best be measured by the little things that make everything work more +harmoniously. A key part of every network environment solution is the +ability to remotely +manage MS Windows workstations, remotely access the Samba server, provide customized +logon scripts, as well as other housekeeping activities that help to sustain more reliable network operations.

    -This chapter presents information on each of these area. They are placed here, and not in +This chapter presents information on each of these areas. They are placed here, and not in other chapters, for ease of reference. -

    Remote Server Administration

    -How do I get 'User Manager' and 'Server Manager'? -

    - Since I don't need to buy an NT4 Server, how do I get the 'User Manager for Domains', -the 'Server Manager'? -

    -Microsoft distributes a version of these tools called nexus for installation -on Windows 9x / Me systems. The tools set includes: -

    Server Manager
    User Manager for Domains
    Event Viewer

    -Click here to download the archived file ftp://ftp.microsoft.com/Softlib/MSLFILES/NEXUS.EXE -

    -The Windows NT 4.0 version of the 'User Manager for -Domains' and 'Server Manager' are available from Microsoft via ftp -from ftp://ftp.microsoft.com/Softlib/MSLFILES/SRVTOOLS.EXE -

    Remote Desktop Management

    +

    Remote Server Administration

    How do I get `User Manager' and `Server Manager'?

    + + + +Since I do not need to buy an NT4 Server, how do I get the `User Manager for Domains' +and the `Server Manager'? +

    + +Microsoft distributes a version of these tools called Nexus.exe for installation +on Windows 9x/Me systems. The tools set includes: +

    • Server Manager
    • User Manager for Domains
    • Event Viewer

    +Download the archived file at ftp://ftp.microsoft.com/Softlib/MSLFILES/NEXUS.EXE. +

    + +The Windows NT 4.0 version of the `User Manager for +Domains' and `Server Manager' are available from Microsoft via ftp. +

    Remote Desktop Management

    There are a number of possible remote desktop management solutions that range from free -through costly. Do not let that put you off. Sometimes the most costly solutions is the +through costly. Do not let that put you off. Sometimes the most costly solution is the most cost effective. In any case, you will need to draw your own conclusions as to which is the best tool in your network environment. -

    Remote Management from NoMachines.Com

    +

    Remote Management from NoMachine.Com

    + The following information was posted to the Samba mailing list at Apr 3 23:33:50 GMT 2003. It is presented in slightly edited form (with author details omitted for privacy reasons). The entire answer is reproduced below with some comments removed. -

    -

    -> I have a wonderful linux/samba server running as PDC for a network.
    -> Now I would like to add remote desktop capabilities so that
    -> users outside could login to the system and get their desktop up from
    -> home or another country..
    ->
    -> Is there a way to accomplish this? Do I need a windows terminal server?
    -> Do I need to configure it so that it is a member of the domain or a
    -> BDC,PDC? Are there any hacks for MS Windows XP to enable remote login
    -> even if the computer is in a domain?
    ->
    -> Any ideas/experience would be appreciated :)
    -

    -

    - Answer provided: Check out the new offer from NoMachine, "NX" software: - http://www.nomachine.com/. -

    - It implements a very easy-to-use interface to the remote X protocol as +

    + I have a wonderful Linux/Samba server running as pdc for a network. Now I would like to add remote + desktop capabilities so users outside could login to the system and get their desktop up from home or + another country. +

    + Is there a way to accomplish this? Do I need a Windows Terminal Server? Do I need to configure it so + it is a member of the domain or a BDC,PDC? Are there any hacks for MS Windows XP to enable remote login + even if the computer is in a domain? +

    + Answer provided: Check out the new offer from NoMachine, “NX” software: + http://www.nomachine.com/. +

    + It implements an easy-to-use interface to the Remote X protocol as well as incorporating VNC/RFB and rdesktop/RDP into it, but at a speed - performance much better than anything you may have ever seen... + performance much better than anything you may have ever seen.

    - Remote X is not new at all -- but what they did achieve successfully is - a new way of compression and caching technologies which makes the thing + Remote X is not new at all, but what they did achieve successfully is + a new way of compression and caching technologies that makes the thing fast enough to run even over slow modem/ISDN connections.

    - I could test drive their (public) RedHat machine in Italy, over a loaded - internet connection, with enabled thumbnail previews in KDE konqueror - which popped up immediately on "mouse-over". From inside that (remote X) + I could test drive their (public) Red Hat machine in Italy, over a loaded + Internet connection, with enabled thumbnail previews in KDE konqueror + which popped up immediately on “mouse-over”. From inside that (remote X) session I started a rdesktop session on another, a Windows XP machine. - To test the performance, I played Pinball. I am proud to announce here - that my score was 631750 points at first try... + To test the performance, I played Pinball. I am proud to announce + that my score was 631750 points at first try.

    - NX performs better on my local LAN than any of the other "pure" + NX performs better on my local LAN than any of the other “pure” connection methods I am using from time to time: TightVNC, rdesktop or - remote X. It is even faster than a direct crosslink connection between + Remote X. It is even faster than a direct crosslink connection between two nodes.

    - I even got sound playing from the remote X app to my local boxes, and - had a working "copy'n'paste" from an NX window (running a KDE session - in Italy) to my Mozilla mailing agent... These guys are certainly doing + I even got sound playing from the Remote X app to my local boxes, and + had a working “copy'n'paste” from an NX window (running a KDE session + in Italy) to my Mozilla mailing agent. These guys are certainly doing something right!

    - I recommend to test drive NX to anybody with a only a remote interest - in remote computing - http://www.nomachine.com/testdrive.php. + I recommend to test drive NX to anybody with a only a passing interest in remote computing + http://www.nomachine.com/testdrive.php.

    - Just download the free of charge client software (available for RedHat, - SuSE, Debian and Windows) and be up and running within 5 minutes (they + Just download the free of charge client software (available for Red Hat, + SuSE, Debian and Windows) and be up and running within five minutes (they need to send you your account data, though, because you are assigned - a real Unix account on their testdrive.nomachine.com box... + a real UNIX account on their testdrive.nomachine.com box.

    They plan to get to the point were you can have NX application servers running as a cluster of nodes, and users simply start an NX session locally, and can select applications to run transparently (apps may even run on another NX node, but pretend to be on the same as used for initial login, - because it displays in the same window.... well, you also can run it + because it displays in the same window. You also can run it fullscreen, and after a short time you forget that it is a remote session at all).

    - Now the best thing at the end: all the core compression and caching + Now the best thing for last: All the core compression and caching technologies are released under the GPL and available as source code to anybody who wants to build on it! These technologies are working, albeit started from the command line only (and very inconvenient to - use in order to get a fully running remote X session up and running....) + use in order to get a fully running remote X session up and running.)

    To answer your questions:

    • - You don't need to install a terminal server; XP has RDP support built in. + You do not need to install a terminal server; XP has RDP support built in.

    • - NX is much cheaper than Citrix -- and comparable in performance, probably faster + NX is much cheaper than Citrix and comparable in performance, probably faster.

    • - You don't need to hack XP -- it just works + You do not need to hack XP it just works.

    • You log into the XP box from remote transparently (and I think there is no - need to change anything to get a connection, even if authentication is against a domain) + need to change anything to get a connection, even if authentication is against a domain).

    • - The NX core technologies are all Open Source and released under the GPL -- - you can today use a (very inconvenient) commandline to use it at no cost, - but you can buy a comfortable (proprietary) NX GUI frontend for money + The NX core technologies are all Open Source and released under the GPL + you can now use a (very inconvenient) commandline at no cost, + but you can buy a comfortable (proprietary) NX GUI frontend for money.

    • NoMachine are encouraging and offering help to OSS/Free Software implementations for such a frontend too, even if it means competition to them (they have written - to this effect even to the LTSP, KDE and GNOME developer mailing lists) -

    Network Logon Script Magic

    -This section needs work. Volunteer contributions most welcome. Please send your patches or updates -to John Terpstra. -

    + to this effect even to the LTSP, KDE and GNOME developer mailing lists). +

    Network Logon Script Magic

    There are several opportunities for creating a custom network startup configuration environment. -

    No Logon Script
    Simple universal Logon Script that applies to all users
    Use of a conditional Logon Script that applies per user or per group attributes
    Use of Samba's Preexec and Postexec functions on access to the NETLOGON share to create - a custom Logon Script and then execute it.
    User of a tool such as KixStart

    +

    • No Logon Script.
    • Simple universal Logon Script that applies to all users.
    • Use of a conditional Logon Script that applies per user or per group attributes.
    • Use of Samba's preexec and postexec functions on access to the NETLOGON share to create + a custom logon script and then execute it.
    • User of a tool such as KixStart.

    The Samba source code tree includes two logon script generation/execution tools. See examples directory genlogon and ntlogon subdirectories.

    The following listings are from the genlogon directory.

    + This is the genlogon.pl file:

    @@ -12106,8 +12262,8 @@ This is the genlogon.pl file:
     	# genlogon.pl
     	#
     	# Perl script to generate user logon scripts on the fly, when users
    -	# connect from a Windows client.  This script should be called from smb.conf
    -	# with the %U, %G and %L parameters. I.e:
    +	# connect from a Windows client. This script should be called from 
    +	# smb.conf with the %U, %G and %L parameters. I.e:
     	#
     	#       root preexec = genlogon.pl %U %G %L
     	#
    @@ -12128,7 +12284,8 @@ This is the genlogon.pl file:
     	#($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime(time);
     	($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime(time);
     	open LOG, ">>/var/log/samba/netlogon.log";
    -	print LOG "$mon/$mday/$year $hour:$min:$sec - User $ARGV[0] logged into $ARGV[1]\n";
    +	print LOG "$mon/$mday/$year $hour:$min:$sec";
    +	print LOG " - User $ARGV[0] logged into $ARGV[1]\n";
     	close LOG;
     
     	# Start generating logon script
    @@ -12154,7 +12311,7 @@ This is the genlogon.pl file:
     		print LOGON "NET USE K: \\\\$ARGV[2]\\MKTING\r\n";
     	}
     
    -	# Now connect Printers.  We handle just two or three users a little
    +	# Now connect Printers. We handle just two or three users a little
     	# differently, because they are the exceptions that have desktop
     	# printers on LPT1: - all other user's go to the LaserJet on the
     	# server.
    @@ -12174,37 +12331,37 @@ This is the genlogon.pl file:
     	close LOGON;
     

    -Those wishing to use more elaborate or capable logon processing system should check out the following sites: -

    http://www.craigelachie.org/rhacer/ntlogon
    http://www.kixtart.org
    http://support.microsoft.com/default.asp?scid=kb;en-us;189105

    Adding printers without user intervention

    +Those wishing to use more elaborate or capable logon processing system should check out these sites: +

    • http://www.craigelachi.e.org/rhacer/ntlogon
    • http://www.kixtart.org

    Adding Printers without User Intervention

    + Printers may be added automatically during logon script processing through the use of: -

    -	rundll32 printui.dll,PrintUIEntry /?
    -

    - -See the documentation in the Microsoft knowledgebase article no: 189105. -

    Common Errors

    -The information provided in this chapter has been reproduced from postings on the samba@samba.org -mailing list. No implied endorsement or recommendation is offered. Administrators should conduct -their own evaluation of alternatives and are encouraged to draw their own conclusions. -

    Chapter 23. System and Account Policies

    John H. Terpstra

    Samba Team

    April 3 2003

    -This chapter summarises the current state of knowledge derived from personal -practice and knowledge from samba mailing list subscribers. Before reproduction -of posted information effort has been made to validate the information provided. +

    +C:\> rundll32 printui.dll,PrintUIEntry /?
    +

    + +See the documentation in the Microsoft knowledgebase article 189105. +

    Chapter 23. System and Account Policies

    John H. Terpstra

    Samba Team

    April 3 2003

    +This chapter summarizes the current state of knowledge derived from personal +practice and knowledge from Samba mailing list subscribers. Before reproduction +of posted information, every effort has been made to validate the information given. Where additional information was uncovered through this validation it is provided also. -

    Features and Benefits

    -When MS Windows NT3.5 was introduced the hot new topic was the ability to implement -Group Policies for users and group. Then along came MS Windows NT4 and a few sites -started to adopt this capability. How do we know that? By way of the number of "booboos" +

    Features and Benefits

    +When MS Windows NT 3.5 was introduced, the hot new topic was the ability to implement +Group Policies for users and groups. Then along came MS Windows NT4 and a few sites +started to adopt this capability. How do we know that? By the number of “booboos” (or mistakes) administrators made and then requested help to resolve.

    + + + By the time that MS Windows 2000 and Active Directory was released, administrators got the message: Group Policies are a good thing! They can help reduce administrative -costs and actually can help to create happier users. But adoption of the true +costs and actually make happier users. But adoption of the true potential of MS Windows 200x Active Directory and Group Policy Objects (GPOs) for users -and machines were picked up on rather slowly. This was very obvious from the samba -mailing list as in 2000 and 2001 there were very few postings regarding GPOs and +and machines were picked up on rather slowly. This was obvious from the Samba +mailing list as in 2000 and 2001 when there were few postings regarding GPOs and how to replicate them in a Samba environment.

    Judging by the traffic volume since mid 2002, GPOs have become a standard part of @@ -12212,996 +12369,814 @@ the deployment in many sites. This chapter reviews techniques and methods that c be used to exploit opportunities for automation of control over user desktops and network client workstations.

    -A tool new to Samba may become an important part of the future Samba Administrators' -arsenal. The editreg tool is described in this document. -

    Creating and Managing System Policies

    +A tool new to Samba the editreg tool + may become an important part of the future Samba administrators' +arsenal is described in this document. +

    Creating and Managing System Policies

    Under MS Windows platforms, particularly those following the release of MS Windows -NT4 and MS Windows 95) it is possible to create a type of file that would be placed -in the NETLOGON share of a domain controller. As the client logs onto the network +NT4 and MS Windows 95, it is possible to create a type of file that would be placed +in the NETLOGON share of a Domain Controller. As the client logs onto the network, this file is read and the contents initiate changes to the registry of the client machine. This file allows changes to be made to those parts of the registry that affect users, groups of users, or machines.

    -For MS Windows 9x/Me this file must be called Config.POL and may + +For MS Windows 9x/ME, this file must be called Config.POL and may be generated using a tool called poledit.exe, better known as the Policy Editor. The policy editor was provided on the Windows 98 installation CD, but disappeared again with the introduction of MS Windows Me (Millennium Edition). From -comments from MS Windows network administrators it would appear that this tool became +comments of MS Windows network administrators, it would appear that this tool became a part of the MS Windows Me Resource Kit.

    + MS Windows NT4 Server products include the System Policy Editor -under the Start -> Programs -> Administrative Tools menu item. -For MS Windows NT4 and later clients this file must be called NTConfig.POL. +under Start -> Programs -> Administrative Tools. +For MS Windows NT4 and later clients, this file must be called NTConfig.POL.

    New with the introduction of MS Windows 2000 was the Microsoft Management Console -or MMC. This tool is the new wave in the ever changing landscape of Microsoft +or MMC. This tool is the new wave in the ever-changing landscape of Microsoft methods for management of network access and security. Every new Microsoft product -or technology seems to obsolete the old rules and to introduce newer and more -complex tools and methods. To Microsoft's credit though, the MMC does appear to +or technology seems to make the old rules obsolete and introduces newer and more +complex tools and methods. To Microsoft's credit, the MMC does appear to be a step forward, but improved functionality comes at a great price.

    -Before embarking on the configuration of network and system policies it is highly -advisable to read the documentation available from Microsoft's web site regarding - -Implementing Profiles and Policies in Windows NT 4.0 available from Microsoft. +Before embarking on the configuration of network and system policies, it is highly +advisable to read the documentation available from Microsoft's Web site regarding + +Implementing Profiles and Policies in Windows NT 4.0 available from Microsoft. There are a large number of documents in addition to this old one that should also -be read and understood. Try searching on the Microsoft web site for "Group Policies". -

    -What follows is a very brief discussion with some helpful notes. The information provided -here is incomplete - you are warned. -

    Windows 9x/Me Policies

    - You need the Win98 Group Policy Editor to set Group Profiles up under Windows 9x/Me. - It can be found on the Original full product Win98 installation CD under - tools/reskit/netadmin/poledit. Install this using the - Add/Remove Programs facility and then click on the 'Have Disk' tab. +be read and understood. Try searching on the Microsoft Web site for “Group Policies”. +

    +What follows is a brief discussion with some helpful notes. The information provided +here is incomplete you are warned. +

    Windows 9x/ME Policies

    + You need the Windows 98 Group Policy Editor to set up Group Profiles under Windows 9x/ME. + It can be found on the original full product Windows 98 installation CD under + tools/reskit/netadmin/poledit. Install this using the + Add/Remove Programs facility and then click on Have Disk.

    + Use the Group Policy Editor to create a policy file that specifies the location of - user profiles and/or the My Documents etc. Then save these + user profiles and/or My Documents, and so on. Then save these settings in a file called Config.POL that needs to be placed in the - root of the [NETLOGON] share. If Win98 is configured to log onto - the Samba Domain, it will automatically read this file and update the Win9x/Me registry + root of the [NETLOGON] share. If Windows 98 is configured to log onto + the Samba Domain, it will automatically read this file and update the Windows 9x/Me registry of the machine as it logs on.

    - Further details are covered in the Win98 Resource Kit documentation. + Further details are covered in the Windows 98 Resource Kit documentation.

    - If you do not take the right steps, then every so often Win9x/Me will check the - integrity of the registry and will restore it's settings from the back-up - copy of the registry it stores on each Win9x/Me machine. Hence, you will + If you do not take the correct steps, then every so often Windows 9x/ME will check the + integrity of the registry and restore its settings from the back-up + copy of the registry it stores on each Windows 9x/ME machine. So, you will occasionally notice things changing back to the original settings.

    - Install the group policy handler for Win9x to pick up group policies. Look on the - Win98 CD in \tools\reskit\netadmin\poledit. - Install group policies on a Win9x client by double-clicking + Install the group policy handler for Windows 9x/Me to pick up Group Policies. Look on the + Windows 98 CDROM in \tools\reskit\netadmin\poledit. + Install group policies on a Windows 9x/Me client by double-clicking on grouppol.inf. Log off and on again a couple of times and see - if Win98 picks up group policies. Unfortunately this needs to be done on every - Win9x/Me machine that uses group policies. -

    Windows NT4 Style Policy Files

    + if Windows 98 picks up Group Policies. Unfortunately, this needs to be done on every + Windows 9x/Me machine that uses Group Policies. +

    Windows NT4-Style Policy Files

    To create or edit ntconfig.pol you must use the NT Server - Policy Editor, poledit.exe which is included with NT4 Server - but not NT Workstation. There is a Policy Editor on a NT4 - Workstation but it is not suitable for creating Domain Policies. - Further, although the Windows 95 Policy Editor can be installed on an NT4 + Policy Editor, poledit.exe, which is included with NT4 Server + but not with NT Workstation. There is a Policy Editor on an NT4 + Workstation but it is not suitable for creating domain policies. + Furthermore, although the Windows 95 Policy Editor can be installed on an NT4 Workstation/Server, it will not work with NT clients. However, the files from the NT Server will run happily enough on an NT4 Workstation.

    You need poledit.exe, common.adm and winnt.adm. - It is convenient to put the two *.adm files in the c:\winnt\inf - directory which is where the binary will look for them unless told otherwise. Note also that that - directory is normally 'hidden'. + It is convenient to put the two *.adm files in the c:\winnt\inf + directory, which is where the binary will look for them unless told otherwise. This + directory is normally “hidden.

    The Windows NT policy editor is also included with the Service Pack 3 (and later) for Windows NT 4.0. Extract the files using servicepackname /x, - i.e. that's Nt4sp6ai.exe /x for service pack 6a. The policy editor, - poledit.exe and the associated template files (*.adm) should - be extracted as well. It is also possible to downloaded the policy template - files for Office97 and get a copy of the policy editor. Another possible + that's Nt4sp6ai.exe /x for service pack 6a. The Policy Editor, + poledit.exe, and the associated template files (*.adm) should + be extracted as well. It is also possible to downloaded the policy template + files for Office97 and get a copy of the Policy Editor. Another possible location is with the Zero Administration Kit available for download from Microsoft. -

    Registry Spoiling

    - With NT4 style registry based policy changes, a large number of settings are not - automatically reversed as the user logs off. Since the settings that were in the - NTConfig.POL file were applied to the client machine registry and that apply to the +

    Registry Spoiling

    + With NT4-style registry-based policy changes, a large number of settings are not + automatically reversed as the user logs off. The settings that were in the + NTConfig.POL file were applied to the client machine registry and apply to the hive key HKEY_LOCAL_MACHINE are permanent until explicitly reversed. This is known - as tattooing. It can have serious consequences down-stream and the administrator must + as tattooing. It can have serious consequences downstream and the administrator must be extremely careful not to lock out the ability to manage the machine at a later date. -

    MS Windows 200x / XP Professional Policies

    - Windows NT4 System policies allows setting of registry parameters specific to - users, groups and computers (client workstations) that are members of the NT4 - style domain. Such policy file will work with MS Windows 2000 / XP clients also. +

    MS Windows 200x/XP Professional Policies

    + Windows NT4 system policies allow the setting of registry parameters specific to + users, groups and computers (client workstations) that are members of the NT4-style + domain. Such policy files will work with MS Windows 200x/XP clients also.

    - New to MS Windows 2000 Microsoft introduced a new style of group policy that confers - a superset of capabilities compared with NT4 style policies. Obviously, the tool used - to create them is different, and the mechanism for implementing them is much changed. + New to MS Windows 2000, Microsoft recently introduced a style of group policy that confers + a superset of capabilities compared with NT4-style policies. Obviously, the tool used + to create them is different, and the mechanism for implementing them is much improved.

    - The older NT4 style registry based policies are known as Administrative Templates - in MS Windows 2000/XP Group Policy Objects (GPOs). The later includes ability to set various security + + The older NT4-style registry-based policies are known as Administrative Templates + in MS Windows 2000/XP Group Policy Objects (GPOs). The later includes the ability to set various security configurations, enforce Internet Explorer browser settings, change and redirect aspects of the - users' desktop (including: the location of My Documents files (directory), as + users desktop (including the location of My Documents files (directory), as well as intrinsics of where menu items will appear in the Start menu). An additional new feature is the ability to make available particular software Windows applications to particular users and/or groups.

    - Remember: NT4 policy files are named NTConfig.POL and are stored in the root - of the NETLOGON share on the domain controllers. A Windows NT4 user enters a username, a password - and selects the domain name to which the logon will attempt to take place. During the logon - process the client machine reads the NTConfig.POL file from the NETLOGON share on the authenticating - server, modifies the local registry values according to the settings in this file. + Remember, NT4 policy files are named NTConfig.POL and are stored in the root + of the NETLOGON share on the Domain Controllers. A Windows NT4 user enters a username, password + and selects the domain name to which the logon will attempt to take place. During the logon process, + the client machine reads the NTConfig.POL file from the NETLOGON share on + the authenticating server and modifies the local registry values according to the settings in this file.

    - Windows 2K GPOs are very feature rich. They are NOT stored in the NETLOGON share, rather part of + Windows 200x GPOs are feature-rich. They are not stored in the NETLOGON share, but rather part of a Windows 200x policy file is stored in the Active Directory itself and the other part is stored in a shared (and replicated) volume called the SYSVOL folder. This folder is present on all Active - Directory domain controllers. The part that is stored in the Active Directory itself is called the - group policy container (GPC), and the part that is stored in the replicated share called SYSVOL is - known as the group policy template (GPT). -

    - With NT4 clients the policy file is read and executed upon only as each user logs onto the network. - MS Windows 200x policies are much more complex - GPOs are processed and applied at client machine - startup (machine specific part) and when the user logs onto the network the user specific part - is applied. In MS Windows 200x style policy management each machine and/or user may be subject + Directory Domain Controllers. The part that is stored in the Active Directory itself is called the + Group Policy Container (GPC), and the part that is stored in the replicated share called SYSVOL is + known as the Group Policy Template (GPT). +

    + With NT4 clients, the policy file is read and executed only as each user logs onto the network. + MS Windows 200x policies are much more complex GPOs are processed and applied at client machine + startup (machine specific part) and when the user logs onto the network, the user-specific part + is applied. In MS Windows 200x-style policy management, each machine and/or user may be subject to any number of concurrently applicable (and applied) policy sets (GPOs). Active Directory allows the administrator to also set filters over the policy settings. No such equivalent capability - exists with NT4 style policy files. -

    Administration of Win2K / XP Policies

    + exists with NT4-style policy files. +

    Administration of Windows 200x/XP Policies

    + + Instead of using the tool called The System Policy Editor, commonly called Poledit (from the executable name poledit.exe), GPOs are created and managed using a Microsoft Management Console (MMC) snap-in as follows:

    1. - Go to the Windows 200x / XP menu Start->Programs->Administrative Tools - and select the MMC snap-in called Active Directory Users and Computers -

    2. - Select the domain or organizational unit (OU) that you wish to manage, then right click - to open the context menu for that object, select the properties item. -

    3. - Now left click on the Group Policy tab, then left click on the New tab. Type a name - for the new policy you will create. -

    4. - Now left click on the Edit tab to commence the steps needed to create the GPO. -

    + Go to the Windows 200x/XP menu Start->Programs->Administrative Tools + and select the MMC snap-in called Active Directory Users and Computers +

  • + Select the domain or organizational unit (OU) that you wish to manage, then right-click + to open the context menu for that object, and select the Properties. +

  • + Left-click on the Group Policy tab, then + left-click on the New tab. Type a name + for the new policy you will create. +

  • + Left-click on the Edit tab to commence the steps needed to create the GPO. +

  • All policy configuration options are controlled through the use of policy administrative - templates. These files have a .adm extension, both in NT4 as well as in Windows 200x / XP. - Beware however, since the .adm files are NOT interchangeable across NT4 and Windows 200x. - The later introduces many new features as well as extended definition capabilities. It is - well beyond the scope of this documentation to explain how to program .adm files, for that + templates. These files have an .adm extension, both in NT4 as well as in Windows 200x/XP. + Beware, however, the .adm files are not interchangeable across NT4 and Windows 200x. + The latter introduces many new features as well as extended definition capabilities. It is + well beyond the scope of this documentation to explain how to program .adm files; for that the administrator is referred to the Microsoft Windows Resource Kit for your particular version of MS Windows.

    Note

    The MS Windows 2000 Resource Kit contains a tool called gpolmig.exe. This tool can be used to migrate an NT4 NTConfig.POL file into a Windows 200x style GPO. Be VERY careful how you use this powerful tool. Please refer to the resource kit manuals for specific usage information. -

    Managing Account/User Policies

    +

    Managing Account/User Policies

    Policies can define a specific user's settings or the settings for a group of users. The resulting policy file contains the registry settings for all users, groups, and computers that will be using the policy file. Separate policy files for each user, group, or computer are not necessary.

    -If you create a policy that will be automatically downloaded from validating domain controllers, -you should name the file NTconfig.POL. As system administrator, you have the option of renaming the + +If you create a policy that will be automatically downloaded from validating Domain Controllers, +you should name the file NTConfig.POL. As system administrator, you have the option of renaming the policy file and, by modifying the Windows NT-based workstation, directing the computer to update the policy from a manual path. You can do this by either manually changing the registry or by using -the System Policy Editor. This path can even be a local path such that each machine has its own policy file, -but if a change is necessary to all machines, this change must be made individually to each workstation. +the System Policy Editor. This can even be a local path such that each machine has its own policy file, +but if a change is necessary to all machines, it must be made individually to each workstation.

    -When a Windows NT4/200x/XP machine logs onto the network the NETLOGON share on the authenticating domain -controller for the presence of the NTConfig.POL file. If one exists it is downloaded, parsed and then -applied to the user's part of the registry. +When a Windows NT4/200x/XP machine logs onto the network, the client looks in the NETLOGON share on +the authenticating domain controller for the presence of the NTConfig.POL file. If one exists it is +downloaded, parsed and then applied to the user's part of the registry.

    -MS Windows 200x/XP clients that log onto an MS Windows Active Directory security domain may additionally, + +MS Windows 200x/XP clients that log onto an MS Windows Active Directory security domain may additionally acquire policy settings through Group Policy Objects (GPOs) that are defined and stored in Active Directory itself. The key benefit of using AS GPOs is that they impose no registry spoiling effect. -This has considerable advantage compared with the use of NTConfig.POL (NT4) style policy updates. +This has considerable advantage compared with the use of NTConfig.POL (NT4) style policy updates.

    In addition to user access controls that may be imposed or applied via system and/or group policies in a manner that works in conjunction with user profiles, the user management environment under MS Windows NT4/200x/XP allows per domain as well as per user account restrictions to be applied. -Common restrictions that are frequently used includes: -

    -

    • Logon Hours

    • Password Aging

    • Permitted Logon from certain machines only

    • Account type (Local or Global)

    • User Rights

    -

    Samba Editreg Toolset

    +Common restrictions that are frequently used include: +

    + +

    • Logon hours
    • Password aging
    • Permitted logon from certain machines only
    • Account type (local or global)
    • User rights

    +

    +Samba-3.0.0 doe not yet implement all account controls that are common to MS Windows NT4/200x/XP. +While it is possible to set many controls using the Domain User Manager for MS Windows NT4, only password +expirey is functional today. Most of the remaining controls at this time have only stub routines +that may eventually be completed to provide actual control. Do not be misled by the fact that a +parameter can be set using the NT4 Domain User Manager or in the NTConfig.POL. +

    Management Tools

    +Anyone who wishes to create or manage Group Policies will need to be familiar with a number of tools. +The following sections describe a few key tools that will help you to create a low maintenance user +environment. +

    Samba Editreg Toolset

    + + + A new tool called editreg is under development. This tool can be used - to edit registry files (called NTUser.DAT) that are stored in user and group profiles. - NTConfig.POL files have the same structure as the NTUser.DAT file and can be editted using - this tool. editreg is being built with the intent to enable NTConfig.POL - files to be saved in text format and to permit the building of new NTConfig.POL files with - extended capabilities. It is proving difficult to realise this capability, so do not be surprised - if this feature does not materialise. Formal capabilities will be announced at the time that - this tool is released for production use. -

    Windows NT4/200x

    + to edit registry files (called NTUser.DAT) that are stored in user + and group profiles. NTConfig.POL files have the same structure as the + NTUser.DAT file and can be edited using this tool. editreg + is being built with the intent to enable NTConfig.POL files to be saved in text format and to + permit the building of new NTConfig.POL files with extended capabilities. It is proving difficult + to realize this capability, so do not be surprised if this feature does not materialize. Formal + capabilities will be announced at the time that this tool is released for production use. +

    Windows NT4/200x

    The tools that may be used to configure these types of controls from the MS Windows environment are: - The NT4 User Manager for domains, the NT4 System and Group Policy Editor, the registry editor (regedt32.exe). - Under MS Windows 200x/XP this is done using the Microsoft Management Console (MMC) with appropriate - "snap-ins", the registry editor, and potentially also the NT4 System and Group Policy Editor. -

    Samba PDC

    - With a Samba Domain Controller, the new tools for managing of user account and policy information includes: + the NT4 User Manager for Domains, the NT4 System and Group Policy Editor, and the Registry Editor (regedt32.exe). + Under MS Windows 200x/XP, this is done using the Microsoft Management Console (MMC) with appropriate + “snap-ins,” the registry editor, and potentially also the NT4 System and Group Policy Editor. +

    Samba PDC

    + With a Samba Domain Controller, the new tools for managing user account and policy information include: smbpasswd, pdbedit, net, rpcclient. - The administrator should read the - man pages for these tools and become familiar with their use. -

    System Startup and Logon Processing Overview

    -The following attempts to document the order of processing of system and user policies following a system + The administrator should read the man pages for these tools and become familiar with their use. +

    System Startup and Logon Processing Overview

    +The following attempts to document the order of processing the system and user policies following a system reboot and as part of the user logon:

    1. Network starts, then Remote Procedure Call System Service (RPCSS) and Multiple Universal Naming - Convention Provider (MUP) start + Convention Provider (MUP) start.

    2. Where Active Directory is involved, an ordered list of Group Policy Objects (GPOs) is downloaded and applied. The list may include GPOs that: -

      • Apply to the location of machines in a Directory

      • Apply only when settings have changed

      • Depend on configuration of scope of applicability: local, site, domain, organizational unit, etc.

      +

      • Apply to the location of machines in a Directory.

      • Apply only when settings have changed.

      • Depend on configuration of the scope of applicability: local, + site, domain, organizational unit, and so on.

      No desktop user interface is presented until the above have been processed.

    3. Execution of start-up scripts (hidden and synchronous by default).

    4. - A keyboard action to affect start of logon (Ctrl-Alt-Del). + A keyboard action to effect start of logon (Ctrl-Alt-Del).

    5. - User credentials are validated, User profile is loaded (depends on policy settings). + User credentials are validated, user profile is loaded (depends on policy settings).

    6. - An ordered list of User GPOs is obtained. The list contents depends on what is configured in respect of: + An ordered list of user GPOs is obtained. The list contents depends on what is configured in respect of: -

      • Is user a domain member, thus subject to particular policies

      • Loopback enablement, and the state of the loopback policy (Merge or Replace)

      • Location of the Active Directory itself

      • Has the list of GPOs changed. No processing is needed if not changed.

      +

      • Is the user a Domain Member, thus subject to particular policies?
      • Loopback enablement, and the state of the loopback policy (Merge or Replace).
      • Location of the Active Directory itself.
      • Has the list of GPOs changed? No processing is needed if not changed.

    7. User Policies are applied from Active Directory. Note: There are several types.

    8. - Logon scripts are run. New to Win2K and Active Directory, logon scripts may be obtained based on Group - Policy objects (hidden and executed synchronously). NT4 style logon scripts are then run in a normal + Logon scripts are run. New to Windows 200x and Active Directory, logon scripts may be obtained based on Group + Policy objects (hidden and executed synchronously). NT4-style logon scripts are then run in a normal window.

    9. - The User Interface as determined from the GPOs is presented. Note: In a Samba domain (like and NT4 - Domain) machine (system) policies are applied at start-up, User policies are applied at logon. -

    Common Errors

    -Policy related problems can be very difficult to diagnose and even more difficult to rectify. The following + The User Interface as determined from the GPOs is presented. Note: In a Samba domain (like an NT4 + Domain), machine (system) policies are applied at start-up; user policies are applied at logon. +

    Common Errors

    +Policy-related problems can be quite difficult to diagnose and even more difficult to rectify. The following collection demonstrates only basic issues. -

    Policy Does Not Work

    - “We have created the config.pol file and put it in the NETLOGON share. -It has made no difference to our Win XP Pro machines, they just don't see it. IT worked fine with Win 98 but does not +

    Policy Does Not Work

    +“We have created the Config.POL file and put it in the NETLOGON share. +It has made no difference to our Win XP Pro machines, they just do not see it. It worked fine with Win 98 but does not work any longer since we upgraded to Win XP Pro. Any hints?

    -Policy files are NOT portable between Windows 9x / Me and MS Windows NT4 / 200x / XP based -platforms. You need to use the NT4 Group Policy Editor to create a file called NTConfig.POL so that -it is in the correct format for your MS Windows XP Pro clients. -

    Chapter 24. Desktop Profile Management

    John H. Terpstra

    Samba Team

    April 3 2003

    Features and Benefits

    -Roaming Profiles are feared by some, hated by a few, loved by many, and a Godsend for +Policy files are not portable between Windows 9x/Me and MS Windows NT4/200x/XP-based platforms. You need to +use the NT4 Group Policy Editor to create a file called NTConfig.POL so it is in the +correct format for your MS Windows XP Pro clients. +

    Chapter 24. Desktop Profile Management

    John H. Terpstra

    Samba Team

    April 3 2003

    Features and Benefits

    +Roaming profiles are feared by some, hated by a few, loved by many, and a Godsend for some administrators.

    -Roaming Profiles allow an administrator to make available a consistent user desktop +Roaming profiles allow an administrator to make available a consistent user desktop as the user moves from one machine to another. This chapter provides much information -regarding how to configure and manage Roaming Profiles. +regarding how to configure and manage roaming profiles.

    -While Roaming Profiles might sound like nirvana to some, they are a real and tangible +While roaming profiles might sound like nirvana to some, they are a real and tangible problem to others. In particular, users of mobile computing tools, where often there may not -be a sustained network connection, are often better served by purely Local Profiles. -This chapter provides information to help the Samba administrator to deal with those -situations also. -

    Roaming Profiles

    Warning

    -Roaming profiles support is different for Win9x / Me and Windows NT4/200x. +be a sustained network connection, are often better served by purely local profiles. +This chapter provides information to help the Samba administrator deal with those +situations. +

    Roaming Profiles

    Warning

    +Roaming profiles support is different for Windows 9x/Me and Windows NT4/200x.

    Before discussing how to configure roaming profiles, it is useful to see how -Windows 9x / Me and Windows NT4/200x clients implement these features. +Windows 9x/Me and Windows NT4/200x clients implement these features.

    -Windows 9x / Me clients send a NetUserGetInfo request to the server to get the user's +Windows 9x/Me clients send a NetUserGetInfo request to the server to get the user's profiles location. However, the response does not have room for a separate -profiles location field, only the user's home share. This means that Win9X/Me +profiles location field, only the user's home share. This means that Windows 9x/Me profiles are restricted to being stored in the user's home directory.

    -Windows NT4/200x clients send a NetSAMLogon RPC request, which contains many fields, +Windows NT4/200x clients send a NetSAMLogon RPC request, which contains many fields including a separate field for the location of the user's profiles. -

    Samba Configuration for Profile Handling

    +

    Samba Configuration for Profile Handling

    This section documents how to configure Samba for MS Windows client profile support. -

    NT4/200x User Profiles

    -To support Windows NT4/200x clients, in the [global] section of smb.conf set the -following (for example): +

    NT4/200x User Profiles

    +For example, to support Windows NT4/200x clients, set the followoing in the [global] section of the smb.conf file:

    logon path = \\profileserver\profileshare\profilepath\%U\moreprofilepath

    - This is typically implemented like: +This is typically implemented like:

    logon path = \\%L\Profiles\%u

    -where %L translates to the name of the Samba server and %u translates to the user name +where “%L” translates to the name of the Samba server and “%u” translates to the user name.

    -The default for this option is \\%N\%U\profile, -namely \\sambaserver\username\profile. -The \\N%\%U service is created automatically by the [homes] service. If you are using -a samba server for the profiles, you _must_ make the share specified in the logon path +The default for this option is \\%N\%U\profile, namely \\sambaserver\username\profile. +The \\N%\%U service is created automatically by the [homes] service. If you are using +a Samba server for the profiles, you must make the share that is specified in the logon path browseable. Please refer to the man page for smb.conf in respect of the different -semantics of %L and %N, as well as %U and %u. +semantics of “%L” and “%N”, as well as “%U” and “%u”.

    Note

    -MS Windows NT/2K clients at times do not disconnect a connection to a server -between logons. It is recommended to NOT use the homes -meta-service name as part of the profile share path. -

    Windows 9x / Me User Profiles

    - To support Windows 9x / Me clients, you must use the logon home parameter. Samba has -now been fixed so that net use /home now works as well, and it, too, relies +MS Windows NT/200x clients at times do not disconnect a connection to a server between logons. It is recommended +to not use the homes meta-service name as part of the profile share path. +

    Windows 9x/Me User Profiles

    +To support Windows 9x/Me clients, you must use the logon home +parameter. Samba has been fixed so net use /home now works as well and it, too, relies on the logon home parameter.

    -By using the logon home parameter, you are restricted to putting Win9x / Me -profiles in the user's home directory. But wait! There is a trick you -can use. If you set the following in the [global] section of your smb.conf file: +By using the logon home parameter, you are restricted to putting Windows 9x/Me profiles in the user's home +directory. But wait! There is a trick you can use. If you set the following in the +[global] section of your smb.conf file:

    logon home = \\%L\%U\.profiles

    -then your Windows 9x / Me clients will dutifully put their clients in a subdirectory -of your home directory called .profiles (thus making them hidden). +then your Windows 9x/Me clients will dutifully put their clients in a subdirectory +of your home directory called .profiles (making them hidden).

    -Not only that, but net use /home will also work, because of a feature in -Windows 9x / Me. It removes any directory stuff off the end of the home directory area +Not only that, but net use /home will also work because of a feature in +Windows 9x/Me. It removes any directory stuff off the end of the home directory area and only uses the server and share portion. That is, it looks like you -specified \\%L\%U for logon home. -

    Mixed Windows 9x / Me and Windows NT4/200x User Profiles

    -You can support profiles for both Win9X and WinNT clients by setting both the -logon home and logon path parameters. For example: -

    logon home = \\%L\%u\.profiles
    logon path = \\%L\profiles\%u

    Disabling Roaming Profile Support

    - A question often asked is “How may I enforce use of local profiles?” or - “How do I disable Roaming Profiles?” -

    +specified \\%L\%U for logon home. +

    Mixed Windows 9x/Me and Windows NT4/200x User Profiles

    +You can support profiles for Windows 9x and Windows NT clients by setting both the +logon home and logon path parameters. For example: +

    logon home = \\%L\%u\.profiles
    logon path = \\%L\profiles\%u

    Disabling Roaming Profile Support

    +A question often asked is: “How may I enforce use of local profiles?” or +“How do I disable roaming profiles?” +

    + There are three ways of doing this: +

    In smb.conf

    - Affect the following settings and ALL clients - will be forced to use a local profile: -

    logon home
    logon path

    -

    MS Windows Registry:

    - By using the Microsoft Management Console gpedit.msc to instruct your MS Windows XP machine to use only a local profile. This of course modifies registry settings. The full path to the option is: - - -

    -	Local Computer Policy\
    -		Computer Configuration\
    -			Administrative Templates\
    -				System\
    -					User Profiles\
    -
    -	Disable:	Only Allow Local User Profiles
    -	Disable:	Prevent Roaming Profile Change from Propagating to the Server
    -	

    -

    Change of Profile Type:

    - From the start menu right click on the - My Computer icon, select Properties, click on the User Profiles - tab, select the profile you wish to change from Roaming type to Local, click Change Type. + Affect the following settings and ALL clients will be forced to use a local profile: + logon home and logon path +

    MS Windows Registry

    + By using the Microsoft Management Console gpedit.msc to instruct your MS Windows XP + machine to use only a local profile. This, of course, modifies registry settings. The full + path to the option is: +

    +Local Computer Policy\
    +	Computer Configuration\
    +		Administrative Templates\
    +			System\
    +				User Profiles\
    +
    +Disable: Only Allow Local User Profiles 
    +Disable: Prevent Roaming Profile Change from Propagating to the Server
    +

    +

    Change of Profile Type:

    From the start menu right-click on My Computer icon, + select Properties, click on the User Profiles + tab, select the profile you wish to change from + Roaming type to Local, and click on + Change Type.

    -Consult the MS Windows registry guide for your particular MS Windows version for more -information about which registry keys to change to enforce use of only local user -profiles. +Consult the MS Windows registry guide for your particular MS Windows version for more information +about which registry keys to change to enforce use of only local user profiles.

    Note

    The specifics of how to convert a local profile to a roaming profile, or a roaming profile -to a local one vary according to the version of MS Windows you are running. Consult the -Microsoft MS Windows Resource Kit for your version of Windows for specific information. -

    Windows Client Profile Configuration Information

    Windows 9x / Me Profile Setup

    -When a user first logs in on Windows 9X, the file user.DAT is created, -as are folders Start Menu, Desktop, -Programs and Nethood. -These directories and their contents will be merged with the local -versions stored in c:\windows\profiles\username on subsequent logins, -taking the most recent from each. You will need to use the [global] -options preserve case = yes, short preserve case = yes and -case sensitive = no in order to maintain capital letters in shortcuts -in any of the profile folders. -

    -The user.DAT file contains all the user's preferences. If you wish to -enforce a set of preferences, rename their user.DAT file to user.MAN, -and deny them write access to this file. +to a local one vary according to the version of MS Windows you are running. Consult the Microsoft MS +Windows Resource Kit for your version of Windows for specific information. +

    Windows Client Profile Configuration Information

    Windows 9x/Me Profile Setup

    +When a user first logs in on Windows 9X, the file user.DAT is created, as are folders +Start Menu, Desktop, Programs, and +Nethood. These directories and their contents will be merged with the local +versions stored in c:\windows\profiles\username on subsequent logins, taking the +most recent from each. You will need to use the [global] options +preserve case = yes, +short preserve case = yes and +case sensitive = no +in order to maintain capital letters in shortcuts in any of the profile folders. +

    +The user.DAT file contains all the user's preferences. If you wish to enforce a set of preferences, +rename their user.DAT file to user.MAN, and deny them write access to this file.

    1. - On the Windows 9x / Me machine, go to Control Panel -> Passwords and - select the User Profiles tab. Select the required level of - roaming preferences. Press OK, but do _not_ allow the computer - to reboot. -

    2. - On the Windows 9x / Me machine, go to Control Panel -> Network -> - Client for Microsoft Networks -> Preferences. Select Log on to - NT Domain. Then, ensure that the Primary Logon is Client for - Microsoft Networks. Press OK, and this time allow the computer - to reboot. -

    -Under Windows 9x / Me Profiles are downloaded from the Primary Logon. -If you have the Primary Logon as 'Client for Novell Networks', then -the profiles and logon script will be downloaded from your Novell -Server. If you have the Primary Logon as 'Windows Logon', then the -profiles will be loaded from the local machine - a bit against the -concept of roaming profiles, it would seem! -

    -You will now find that the Microsoft Networks Login box contains -[user, password, domain] instead of just [user, password]. Type in -the samba server's domain name (or any other domain known to exist, -but bear in mind that the user will be authenticated against this -domain and profiles downloaded from it, if that domain logon server -supports it), user name and user's password. -

    -Once the user has been successfully validated, the Windows 9x / Me machine -will inform you that The user has not logged on before and asks you -Do you wish to save the user's preferences?. Select yes. -

    -Once the Windows 9x / Me client comes up with the desktop, you should be able -to examine the contents of the directory specified in the logon path -on the samba server and verify that the Desktop, Start Menu, -Programs and Nethood folders have been created. -

    -These folders will be cached locally on the client, and updated when -the user logs off (if you haven't made them read-only by then). -You will find that if the user creates further folders or short-cuts, -that the client will merge the profile contents downloaded with the -contents of the profile directory already on the local client, taking -the newest folders and short-cuts from each set. -

    -If you have made the folders / files read-only on the samba server, -then you will get errors from the Windows 9x / Me machine on logon and logout, as -it attempts to merge the local and the remote profile. Basically, if -you have any errors reported by the Windows 9x / Me machine, check the UNIX file -permissions and ownership rights on the profile directory contents, -on the samba server. -

    -If you have problems creating user profiles, you can reset the user's -local desktop cache, as shown below. When this user then next logs in, -they will be told that they are logging in "for the first time". -

    Warning

    - Before deleting the contents of the - directory listed in the ProfilePath (this is likely to be - c:\windows\profiles\username), ask them if they - have any important files stored on their desktop or in their start menu. - Delete the contents of the directory ProfilePath (making a backup if any - of the files are needed). -

    - This will have the effect of removing the local (read-only hidden - system file) user.DAT in their profile directory, as well as the - local "desktop", "nethood", "start menu" and "programs" folders. -

    1. - instead of logging in under the [user, password, domain] dialog, - press escape. -

    2. - run the regedit.exe program, and look in: -

      - HKEY_LOCAL_MACHINE\Windows\CurrentVersion\ProfileList -

      - you will find an entry, for each user, of ProfilePath. Note the - contents of this key (likely to be c:\windows\profiles\username), - then delete the key ProfilePath for the required user. -

      [Exit the registry editor].

    3. - search for the user's .PWL password-caching file in the c:\windows - directory, and delete it. -

    4. - log off the windows 9x / Me client. -

    5. - check the contents of the profile path (see logon path described - above), and delete the user.DAT or user.MAN file for the user, - making a backup if required. -

    -If all else fails, increase samba's debug log levels to between 3 and 10, -and / or run a packet trace program such as ethereal or netmon.exe, and -look for error messages. -

    -If you have access to an Windows NT4/200x server, then first set up roaming profiles -and / or netlogons on the Windows NT4/200x server. Make a packet trace, or examine -the example packet traces provided with Windows NT4/200x server, and see what the -differences are with the equivalent samba trace. -

    Windows NT4 Workstation

    -When a user first logs in to a Windows NT Workstation, the profile -NTuser.DAT is created. The profile location can be now specified -through the logon path parameter. -

    -There is a parameter that is now available for use with NT Profiles: -logon drive. This should be set to H: or any other drive, and -should be used in conjunction with the new logon home parameter. -

    -The entry for the NT4 profile is a _directory_ not a file. The NT -help on profiles mentions that a directory is also created with a .PDS -extension. The user, while logging in, must have write permission to -create the full profile path (and the folder with the .PDS extension -for those situations where it might be created.) -

    -In the profile directory, Windows NT4 creates more folders than Windows 9x / Me. -It creates Application Data and others, as well as Desktop, Nethood, -Start Menu and Programs. The profile itself is stored in a file -NTuser.DAT. Nothing appears to be stored in the .PDS directory, and -its purpose is currently unknown. -

    -You can use the System Control Panel to copy a local profile onto -a samba server (see NT Help on profiles: it is also capable of firing -up the correct location in the System Control Panel for you). The -NT Help file also mentions that renaming NTuser.DAT to NTuser.MAN -turns a profile into a mandatory one. -

    -The case of the profile is significant. The file must be called -NTuser.DAT or, for a mandatory profile, NTuser.MAN. -

    Windows 2000/XP Professional

    -You must first convert the profile from a local profile to a domain -profile on the MS Windows workstation as follows: -

    1. - Log on as the LOCAL workstation administrator. -

    2. - Right click on the My Computer Icon, select Properties -

    3. - Click on the User Profiles tab -

    4. - Select the profile you wish to convert (click on it once) + On the Windows 9x/Me machine, go to Control Panel -> + Passwords and select the User Profiles tab. + Select the required level of roaming preferences. Press OK, but do not + allow the computer to reboot. +

    5. + On the Windows 9x/Me machine, go to Control Panel -> + Network -> Client for Microsoft Networks + -> Preferences. Select Log on to NT Domain. Then, + ensure that the Primary Logon is Client for Microsoft Networks. Press + OK, and this time allow the computer to reboot. +

    Under Windows 9x/ME, profiles are downloaded from the Primary Logon. If you have the Primary Logon +as “Client for Novell Networks”, then the profiles and logon script will be downloaded from +your Novell Server. If you have the Primary Logon as “Windows Logon”, then the profiles will +be loaded from the local machine a bit against the concept of roaming profiles, it would seem!

    +You will now find that the Microsoft Networks Login box contains [user, password, domain] instead +of just [user, password]. Type in the Samba server's domain name (or any other domain known to exist, +but bear in mind that the user will be authenticated against this domain and profiles downloaded from it, +if that domain logon server supports it), user name and user's password. +

    Once the user has been successfully validated, the Windows 9x/Me machine will inform you that +The user has not logged on before and asks you Do you +wish to save the user's preferences? Select Yes.

    Once the Windows 9x/Me client comes up with the desktop, you should be able to examine the +contents of the directory specified in the logon path on +the Samba server and verify that the Desktop, Start Menu, +Programs and Nethood folders have been created.

    These folders will be cached locally on the client, and updated when the user logs off (if +you haven't made them read-only by then). You will find that if the user creates further folders or +shortcut, that the client will merge the profile contents downloaded with the contents of the profile +directory already on the local client, taking the newest folders and shortcut from each set.

    If you have made the folders/files read-only on the Samba server, then you will get errors from +the Windows 9x/Me machine on logon and logout as it attempts to merge the local and remote profile. +Basically, if you have any errors reported by the Windows 9x/Me machine, check the UNIX file permissions +and ownership rights on the profile directory contents, on the Samba server.

    If you have problems creating user profiles, you can reset the user's local desktop cache, as +shown below. When this user next logs in, the user will be told that he/she is logging in “for + the first time”. + + +

    1. + Instead of logging in under the [user, password, domain] dialog, press escape.

    2. - Click on the button Copy To + Run the regedit.exe program, and look in: +

      + HKEY_LOCAL_MACHINE\Windows\CurrentVersion\ProfileList +

      + You will find an entry for each user of ProfilePath. Note the contents of this key + (likely to be c:\windows\profiles\username), then delete the key + ProfilePath for the required user.

    3. - In the Permitted to use box, click on the Change button. + Exit the registry editor.

    4. - Click on the 'Look in" area that lists the machine name, when you click - here it will open up a selection box. Click on the domain to which the - profile must be accessible. -

      Note

      You will need to log on if a logon box opens up. Eg: In the connect as: DOMAIN\root, password: mypassword.

    5. - To make the profile capable of being used by anyone select 'Everyone' + Search for the user's .PWL password-caching file in the c:\windows directory, and delete it.

    6. - Click OK. The Selection box will close. + Log off the Windows 9x/Me client.

    7. - Now click on the Ok button to create the profile in the path you - nominated. -

    -Done. You now have a profile that can be edited using the samba -profiles tool. -

    Note

    -Under NT/2K the use of mandatory profiles forces the use of MS Exchange -storage of mail data. That keeps desktop profiles usable. -

    Procedure 24.2. Windows XP Service Pack 1

    1. -This is a security check new to Windows XP (or maybe only -Windows XP service pack 1). It can be disabled via a group policy in -Active Directory. The policy is:

      Computer Configuration\Administrative Templates\System\User -Profiles\Do not check for user ownership of Roaming Profile Folders

      ...and it should be set to Enabled. -Does the new version of samba have an Active Directory analogue? If so, -then you may be able to set the policy through this. -

      -If you cannot set group policies in samba, then you may be able to set -the policy locally on each machine. If you want to try this, then do -the following (N.B. I don't know for sure that this will work in the -same way as a domain group policy): -

    2. -On the XP workstation log in with an Administrator account. -

    3. Click: Start, Run

    4. Type: mmc

    5. Click: OK

    6. A Microsoft Management Console should appear.

    7. Click: File, Add/Remove Snap-in..., Add

    8. Double-Click: Group Policy

    9. Click: Finish, Close

    10. Click: OK

    11. In the "Console Root" window:

    12. Expand: Local Computer Policy, Computer Configuration, - Administrative Templates, System, User Profiles

    13. Double-Click: Do not check for user ownership of Roaming Profile Folders

    14. Select: Enabled

    15. Click: OK

    16. Close the whole console. You do not need to save the settings (this - refers to the console settings rather than the policies you have - changed).

    17. Reboot

    Sharing Profiles between W9x/Me and NT4/200x/XP workstations

    -Sharing of desktop profiles between Windows versions is NOT recommended. -Desktop profiles are an evolving phenomenon and profiles for later versions -of MS Windows clients add features that may interfere with earlier versions -of MS Windows clients. Probably the more salient reason to NOT mix profiles -is that when logging off an earlier version of MS Windows the older format -of profile contents may overwrite information that belongs to the newer -version resulting in loss of profile information content when that user logs -on again with the newer version of MS Windows. -

    -If you then want to share the same Start Menu / Desktop with W9x/Me, you will -need to specify a common location for the profiles. The smb.conf parameters -that need to be common are logon path and -logon home. -

    -If you have this set up correctly, you will find separate user.DAT and -NTuser.DAT files in the same profile directory. -

    Profile Migration from Windows NT4/200x Server to Samba

    -There is nothing to stop you specifying any path that you like for the -location of users' profiles. Therefore, you could specify that the -profile be stored on a samba server, or any other SMB server, as long as -that SMB server supports encrypted passwords. -

    Windows NT4 Profile Management Tools

    -Unfortunately, the Resource Kit information is specific to the version of MS Windows -NT4/200x. The correct resource kit is required for each platform. -

    -Here is a quick guide: -

    1. -On your NT4 Domain Controller, right click on My Computer, then -select the tab labelled User Profiles. -

    2. -Select a user profile you want to migrate and click on it. -

      Note

      I am using the term "migrate" loosely. You can copy a profile to -create a group profile. You can give the user 'Everyone' rights to the -profile you copy this to. That is what you need to do, since your samba -domain is not a member of a trust relationship with your NT4 PDC.

    3. Click the Copy To button.

    4. In the box labelled Copy Profile to add your new path, eg: - c:\temp\foobar

    5. Click on the button Change in the Permitted to use box.

    6. Click on the group 'Everyone' and then click OK. This closes the - 'choose user' box.

    7. Now click OK.

    -Follow the above for every profile you need to migrate. -

    Side bar Notes

    -You should obtain the SID of your NT4 domain. You can use smbpasswd to do -this. Read the man page.

    moveuser.exe

    -The W2K professional resource kit has moveuser.exe. moveuser.exe changes -the security of a profile from one user to another. This allows the account -domain to change, and/or the user name to change. -

    Get SID

    -You can identify the SID by using GetSID.exe from the Windows NT Server 4.0 -Resource Kit. -

    -Windows NT 4.0 stores the local profile information in the registry under -the following key: -HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList -

    -Under the ProfileList key, there will be subkeys named with the SIDs of the -users who have logged on to this computer. (To find the profile information -for the user whose locally cached profile you want to move, find the SID for -the user with the GetSID.exe utility.) Inside of the appropriate user's -subkey, you will see a string value named ProfileImagePath. -

    Mandatory profiles

    -A Mandatory Profile is a profile that the user does NOT have the ability to overwrite. -During the user's session it may be possible to change the desktop environment, but -as the user logs out all changes made will be lost. If it is desired to NOT allow the -user any ability to change the desktop environment then this must be done through -policy settings. See previous chapter. -

    Note

    -Under NO circumstances should the profile directory (or it's contents) be made read-only -as this may render the profile un-usable. + Check the contents of the profile path (see logon path + described above) and delete the user.DAT or user.MAN + file for the user, making a backup if required. +

    Warning

    +Before deleting the contents of the directory listed in the ProfilePath +(this is likely to be c:\windows\profiles\username), ask the owner if they have +any important files stored on their desktop or in their start menu. Delete the contents of the +directory ProfilePath (making a backup if any of the files are needed). +

    +This will have the effect of removing the local (read-only hidden system file) user.DAT +in their profile directory, as well as the local “desktop,” “nethood,” +“start menu,” and “programs” folders.

    -For MS Windows NT4/200x/XP the above method can be used to create mandatory profiles -also. To convert a group profile into a mandatory profile simply locate the NTUser.DAT -file in the copied profile and rename it to NTUser.MAN. -

    -For MS Windows 9x / Me it is the User.DAT file that must be renamed to User.MAN to -affect a mandatory profile. -

    Creating/Managing Group Profiles

    -Most organisations are arranged into departments. There is a nice benefit in -this fact since usually most users in a department will require the same desktop -applications and the same desktop layout. MS Windows NT4/200x/XP will allow the -use of Group Profiles. A Group Profile is a profile that is created firstly using -a template (example) user. Then using the profile migration tool (see above) the -profile is assigned access rights for the user group that needs to be given access -to the group profile. -

    -The next step is rather important. Please note: Instead of assigning a group profile -to users (ie: Using User Manager) on a "per user" basis, the group itself is assigned -the now modified profile. +If all else fails, increase Samba's debug log levels to between 3 and 10, and/or run a packet +sniffer program such as ethereal or netmon.exe, and look for error messages. +

    If you have access to an Windows NT4/200x server, then first set up roaming profiles and/or +netlogons on the Windows NT4/200x server. Make a packet trace, or examine the example packet traces +provided with Windows NT4/200x server, and see what the differences are with the equivalent Samba trace. +

    Windows NT4 Workstation

    When a user first logs in to a Windows NT Workstation, the profile NTuser.DAT is created. The profile +location can be now specified through the logon path parameter. +

    There is a parameter that is now available for use with NT Profiles: logon drive. +This should be set to H: or any other drive, and should be used in conjunction with +the new logon home parameter.

    The entry for the NT4 profile is a directory not a file. The NT help on Profiles mentions that a +directory is also created with a .PDS extension. The user, while logging in, must have write permission +to create the full profile path (and the folder with the .PDS extension for those situations where it +might be created.)

    In the profile directory, Windows NT4 creates more folders than Windows 9x/Me. It creates +Application Data and others, as well as Desktop, +Nethood, Start Menu, and Programs. +The profile itself is stored in a file NTuser.DAT. Nothing appears to be stored +in the .PDS directory, and its purpose is currently unknown.

    You can use the System Control Panel to copy a local profile onto +a Samba server (see NT Help on Profiles; it is also capable of firing up the correct location in the +System Control Panel for you). The NT Help file also mentions that renaming +NTuser.DAT to NTuser.MAN turns a profile into a mandatory one. +

    The case of the profile is significant. The file must be called NTuser.DAT +or, for a mandatory profile, NTuser.MAN.

    Windows 2000/XP Professional

    You must first convert the profile from a local profile to a domain profile on the MS Windows +workstation as follows:

    1. Log on as the local workstation administrator.

    2. Right-click on the My Computer Icon, select + Properties.

    3. Click on the User Profiles tab.

    4. Select the profile you wish to convert (click it once).

    5. Click on the Copy To button.

    6. In the Permitted to use box, click on the + Change button.

    7. Click on the Look in area that lists the machine name. When you click here, it will + open up a selection box. Click on the domain to which the profile must be accessible.

      Note

      You will need to log on if a logon box opens up. + For example, connect as DOMAIN\root, password: + mypassword.

    8. To make the profile capable of being used by anyone, select “Everyone”.

    9. Click on OK and the Selection box will close.

    10. Now click on OK to create the profile in the path + you nominated.

    Done. You now have a profile that can be edited using the Samba profiles tool.

    Note

    - Be careful with group profiles, if the user who is a member of a group also - has a personal profile, then the result will be a fusion (merge) of the two. -

    Default Profile for Windows Users

    -MS Windows 9x / Me and NT4/200x/XP will use a default profile for any user for whom -a profile does not already exist. Armed with a knowledge of where the default profile -is located on the Windows workstation, and knowing which registry keys affect the path -from which the default profile is created, it is possible to modify the default profile -to one that has been optimised for the site. This has significant administrative -advantages. -

    MS Windows 9x/Me

    -To enable default per use profiles in Windows 9x / Me you can either use the Windows 98 System -Policy Editor or change the registry directly. -

    -To enable default per user profiles in Windows 9x / Me, launch the System Policy Editor, then -select File -> Open Registry, then click on the -Local Computer icon, click on Windows 98 System, -select User Profiles, click on the enable box. Do not forget to save the registry changes. -

    -To modify the registry directly, launch the Registry Editor (regedit.exe), select the hive -HKEY_LOCAL_MACHINE\Network\Logon. Now add a DWORD type key with the name -"User Profiles", to enable user profiles set the value to 1, to disable user profiles set it to 0. -

    How User Profiles Are Handled in Windows 9x / Me?

    -When a user logs on to a Windows 9x / Me machine, the local profile path, +Under Windows NT/200x, the use of mandatory profiles forces the use of MS Exchange storage of mail +data and keeps it out of the desktop profile. That keeps desktop profiles from becoming unusable. +

    Windows XP Service Pack 1

    + There is a security check new to Windows XP (or maybe only Windows XP service pack 1). + It can be disabled via a group policy in the Active Directory. The policy is called: +

    + Computer Configuration\Administrative Templates\System\User Profiles\Do not check for + user ownership of Roaming Profile Foldersi +

    + This should be set to Enabled. +

    + Does the new version of Samba have an Active Directory analogue? If so, then you may be able to set the policy through this. +

    If you cannot set group policies in Samba, then you may be able to set the policy locally on + each machine. If you want to try this, then do the following (N.B. I do not know for sure that this + will work in the same way as a domain group policy): +

    1. On the XP workstation, log in with an Administrative account.

    2. Click on Start -> Run.

    3. Type mmc.

    4. Click on OK.

    5. A Microsoft Management Console should appear.

    6. Click on File -> Add/Remove Snap-in -> Add.

    7. Double-click on Group Policy.

    8. Click on Finish -> Close.

    9. Click on OK.

    10. In the “Console Root” window expand Local Computer Policy -> + Computer Configuration -> Administrative Templates -> System -> User Profiles.

    11. Double-click on Do not check for user ownership of Roaming Profile Folders.

    12. Select Enabled.

    13. Click on OK.

    14. Close the whole console. You do not need to save the settings (this refers to the + console settings rather than the policies you have changed).

    15. Reboot.

    Sharing Profiles between W9x/Me and NT4/200x/XP Workstations

    Sharing of desktop profiles between Windows versions is not recommended. Desktop profiles are an +evolving phenomenon and profiles for later versions of MS Windows clients add features that may interfere +with earlier versions of MS Windows clients. Probably the more salient reason to not mix profiles is +that when logging off an earlier version of MS Windows, the older format of profile contents may overwrite +information that belongs to the newer version resulting in loss of profile information content when that +user logs on again with the newer version of MS Windows.

    If you then want to share the same Start Menu/Desktop with W9x/Me, you will need to specify a common +location for the profiles. The smb.conf parameters that need to be common are logon path and logon home.

    If you have this set up correctly, you will find separate user.DAT and +NTuser.DAT files in the same profile directory.

    Profile Migration from Windows NT4/200x Server to Samba

    There is nothing to stop you from specifying any path that you like for the location of users' profiles. +Therefore, you could specify that the profile be stored on a Samba server, or any other SMB server, +as long as that SMB server supports encrypted passwords.

    Windows NT4 Profile Management Tools

    Unfortunately, the Resource Kit information is specific to the version of MS Windows NT4/200x. The +correct resource kit is required for each platform.

    Here is a quick guide:

    1. On your NT4 Domain Controller, right click on My Computer, then select the + tab labeled User Profiles.

    2. Select a user profile you want to migrate and click on it.

      Note

      I am using the term “migrate” loosely. You can copy a profile to create a group + profile. You can give the user Everyone rights to the profile you copy this to. That + is what you need to do, since your Samba domain is not a member of a trust relationship with your NT4 + PDC.

    3. Click on the Copy To button.

    4. In the box labeled Copy Profile to add your new path, e.g., + c:\temp\foobar

    5. Click on Change in the Permitted to use box.

    6. Click on the group “Everyone”, click on OK. This + closes the “choose user” box.

    7. Now click on OK.

    Follow the above for every profile you need to migrate.

    Side Bar Notes

    + +You should obtain the SID of your NT4 domain. You can use smbpasswd to do this. Read the man +page.

    moveuser.exe

    The Windows 200x professional resource kit has moveuser.exe. moveuser.exe changes the security of a profile +from one user to another. This allows the account domain to change, and/or the user name to change.

    +This command is like the Samba profiles tool. +

    Get SID

    + +You can identify the SID by using GetSID.exe from the Windows NT Server 4.0 Resource Kit.

    Windows NT 4.0 stores the local profile information in the registry under the following key: +HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

    Under the ProfileList key, there will be subkeys named with the SIDs of the users who have logged +on to this computer. (To find the profile information for the user whose locally cached profile you want +to move, find the SID for the user with the GetSID.exe utility.) Inside the appropriate user's subkey, +you will see a string value named ProfileImagePath.

    Mandatory Profiles

    + +A Mandatory Profile is a profile that the user does not have the ability to overwrite. During the +user's session, it may be possible to change the desktop environment, however, as the user logs out all changes +made will be lost. If it is desired to not allow the user any ability to change the desktop environment, +then this must be done through policy settings. See the previous chapter.

    Note

    +Under NO circumstances should the profile directory (or its contents) be made read-only +as this may render the profile un-usable. Where it is essential to make a profile read-only +within the UNIX file system, this can be done but then you absolutely must use the fake-permissions +VFS module to instruct MS Windows NT/200x/XP clients that the Profile has write permission for the user. See . +

    For MS Windows NT4/200x/XP, the above method can also be used to create mandatory profiles. To +convert a group profile into a mandatory profile, simply locate the NTUser.DAT file in the copied profile +and rename it to NTUser.MAN.

    For MS Windows 9x/ME, it is the User.DAT file that must be renamed to +User.MAN to effect a mandatory profile.

    Creating and Managing Group Profiles

    + +Most organizations are arranged into departments. There is a nice benefit in this fact since usually +most users in a department require the same desktop applications and the same desktop layout. MS +Windows NT4/200x/XP will allow the use of Group Profiles. A Group Profile is a profile that is created +first using a template (example) user. Then using the profile migration tool (see above), the profile is +assigned access rights for the user group that needs to be given access to the group profile.

    The next step is rather important. Instead of assigning a group profile to users (Using User Manager) +on a “per user” basis, the group itself is assigned the now modified profile.

    Note

    Be careful with Group Profiles. If the user who is a member of a group also has a personal +profile, then the result will be a fusion (merge) of the two.

    Default Profile for Windows Users

    + +MS Windows 9x/Me and NT4/200x/XP will use a default profile for any user for whom a profile +does not already exist. Armed with a knowledge of where the default profile is located on the Windows +workstation, and knowing which registry keys effect the path from which the default profile is created, +it is possible to modify the default profile to one that has been optimized for the site. This has +significant administrative advantages.

    MS Windows 9x/Me

    To enable default per use profiles in Windows 9x/ME, you can either use the Windows +98 System Policy Editor or change the registry directly.

    To enable default per user profiles in Windows 9x/ME, launch the System Policy +Editor, then select File -> Open Registry, +next click on the Local Computer icon, click on Windows 98 System, +select User Profiles, and click on the enable box. Remember to save the registry +changes.

    To modify the registry directly, launch the Registry Editor +(regedit.exe) and select the hive HKEY_LOCAL_MACHINE\Network\Logon. Now +add a DWORD type key with the name “User Profiles,” to +enable user profiles to set the value +to 1; to disable user profiles set it to 0.

    User Profile Handling with Windows 9x/Me

    When a user logs on to a Windows 9x/Me machine, the local profile path, HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\ProfileList, is checked -for an existing entry for that user: -

    -If the user has an entry in this registry location, Windows 9x / Me checks for a locally cached -version of the user profile. Windows 9x / Me also checks the user's home directory (or other -specified directory if the location has been modified) on the server for the User Profile. -If a profile exists in both locations, the newer of the two is used. If the User Profile exists -on the server, but does not exist on the local machine, the profile on the server is downloaded -and used. If the User Profile only exists on the local machine, that copy is used. -

    -If a User Profile is not found in either location, the Default User Profile from the Windows 9x / Me -machine is used and is copied to a newly created folder for the logged on user. At log off, any -changes that the user made are written to the user's local profile. If the user has a roaming -profile, the changes are written to the user's profile on the server. -

    MS Windows NT4 Workstation

    -On MS Windows NT4 the default user profile is obtained from the location +for an existing entry for that user.

    If the user has an entry in this registry location, Windows 9x/Me checks for a locally cached +version of the user profile. Windows 9x/Me also checks the user's home directory (or other specified +directory if the location has been modified) on the server for the User Profile. If a profile exists +in both locations, the newer of the two is used. If the User Profile exists on the server, but does not +exist on the local machine, the profile on the server is downloaded and used. If the User Profile only +exists on the local machine, that copy is used.

    If a User Profile is not found in either location, the Default User Profile from the Windows +9x/Me machine is used and copied to a newly created folder for the logged on user. At log off, any +changes that the user made are written to the user's local profile. If the user has a roaming profile, +the changes are written to the user's profile on the server.

    MS Windows NT4 Workstation

    On MS Windows NT4, the default user profile is obtained from the location %SystemRoot%\Profiles which in a default installation will translate to -C:\WinNT\Profiles. Under this directory on a clean install there will be -three (3) directories: Administrator, All Users, Default User. -

    -The All Users directory contains menu settings that are common across all -system users. The Default User directory contains menu entries that are -customisable per user depending on the profile settings chosen/created. -

    -When a new user first logs onto an MS Windows NT4 machine a new profile is created from: -

    • All Users settings

    • Default User settings (contains the default NTUser.DAT file)

    -When a user logs onto an MS Windows NT4 machine that is a member of a Microsoft security domain -the following steps are followed in respect of profile handling: -

    1. - The users' account information which is obtained during the logon process contains - the location of the users' desktop profile. The profile path may be local to the - machine or it may be located on a network share. If there exists a profile at the location - of the path from the user account, then this profile is copied to the location - %SystemRoot%\Profiles\%USERNAME%. This profile then inherits the - settings in the All Users profile in the %SystemRoot%\Profiles - location. -

    2. - If the user account has a profile path, but at it's location a profile does not exist, - then a new profile is created in the %SystemRoot%\Profiles\%USERNAME% - directory from reading the Default User profile. -

    3. - If the NETLOGON share on the authenticating server (logon server) contains a policy file - (NTConfig.POL) then it's contents are applied to the NTUser.DAT - which is applied to the HKEY_CURRENT_USER part of the registry. -

    4. - When the user logs out, if the profile is set to be a roaming profile it will be written - out to the location of the profile. The NTuser.DAT file is then - re-created from the contents of the HKEY_CURRENT_USER contents. - Thus, should there not exist in the NETLOGON share an NTConfig.POL at the - next logon, the effect of the previous NTConfig.POL will still be held - in the profile. The effect of this is known as tatooing. -

    -MS Windows NT4 profiles may be Local or Roaming. A Local profile -will stored in the %SystemRoot%\Profiles\%USERNAME% location. A roaming profile will -also remain stored in the same way, unless the following registry key is created: -

    -

    -HKEY_LOCAL_MACHINE\SYSTEM\Software\Microsoft\Windows NT\CurrentVersion\
    -winlogon\"DeleteRoamingCache"=dword:00000001
    -

    - -In which case, the local copy (in %SystemRoot%\Profiles\%USERNAME%) will be -deleted on logout. -

    -Under MS Windows NT4 default locations for common resources (like My Documents -may be redirected to a network share by modifying the following registry keys. These changes may be affected -via use of the System Policy Editor (to do so may require that you create your owns template extension -for the policy editor to allow this to be done through the GUI. Another way to do this is by way of first -creating a default user profile, then while logged in as that user, run regedt32 to edit the key settings. -

    -The Registry Hive key that affects the behaviour of folders that are part of the default user profile -are controlled by entries on Windows NT4 is: -

    -HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\ -

    -The above hive key contains a list of automatically managed folders. The default entries are: -

    -

    Table 24.1. User Shell Folder registry keys default values

    NameDefault Value
    AppData%USERPROFILE%\Application Data
    Desktop%USERPROFILE%\Desktop
    Favorites%USERPROFILE%\Favorites
    NetHood%USERPROFILE%\NetHood
    PrintHood%USERPROFILE%\PrintHood
    Programs%USERPROFILE%\Start Menu\Programs
    Recent%USERPROFILE%\Recent
    SendTo%USERPROFILE%\SendTo
    Start Menu %USERPROFILE%\Start Menu
    Startup%USERPROFILE%\Start Menu\Programs\Startup

    -

    -The registry key that contains the location of the default profile settings is: -

    -HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders -

    -The default entries are: - -

    Table 24.2. Defaults of profile settings registry keys

    Common Desktop%SystemRoot%\Profiles\All Users\Desktop
    Common Programs%SystemRoot%\Profiles\All Users\Programs
    Common Start Menu%SystemRoot%\Profiles\All Users\Start Menu
    Common Startup%SystemRoot%\Profiles\All Users\Start Menu\Programs\Startup

    -

    MS Windows 200x/XP

    Note

    - MS Windows XP Home Edition does use default per user profiles, but can not participate - in domain security, can not log onto an NT/ADS style domain, and thus can obtain the profile - only from itself. While there are benefits in doing this the beauty of those MS Windows - clients that CAN participate in domain logon processes allows the administrator to create - a global default profile and to enforce it through the use of Group Policy Objects (GPOs). -

    -When a new user first logs onto MS Windows 200x/XP machine the default profile is obtained from -C:\Documents and Settings\Default User. The administrator can modify (or change -the contents of this location and MS Windows 200x/XP will gladly use it. This is far from the optimum -arrangement since it will involve copying a new default profile to every MS Windows 200x/XP client -workstation. -

    -When MS Windows 200x/XP participate in a domain security context, and if the default user -profile is not found, then the client will search for a default profile in the NETLOGON share -of the authenticating server. ie: In MS Windows parlance: -%LOGONSERVER%\NETLOGON\Default User and if one exits there it will copy this -to the workstation to the C:\Documents and Settings\ under the Windows -login name of the user. -

    Note

    - This path translates, in Samba parlance, to the smb.conf [NETLOGON] share. The directory - should be created at the root of this share and must be called Default Profile. -

    -If a default profile does not exist in this location then MS Windows 200x/XP will use the local -default profile. -

    -On logging out, the users' desktop profile will be stored to the location specified in the registry -settings that pertain to the user. If no specific policies have been created, or passed to the client -during the login process (as Samba does automatically), then the user's profile will be written to -the local machine only under the path C:\Documents and Settings\%USERNAME%. -

    -Those wishing to modify the default behaviour can do so through three methods: -

    • - Modify the registry keys on the local machine manually and place the new default profile in the - NETLOGON share root - NOT recommended as it is maintenance intensive. -

    • - Create an NT4 style NTConfig.POL file that specified this behaviour and locate this file - in the root of the NETLOGON share along with the new default profile. -

    • - Create a GPO that enforces this through Active Directory, and place the new default profile - in the NETLOGON share. -

    -The Registry Hive key that affects the behaviour of folders that are part of the default user profile -are controlled by entries on Windows 200x/XP is: -

    -HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\ -

    -The above hive key contains a list of automatically managed folders. The default entries are: -

    -

    Table 24.3. Defaults of default user profile paths registry keys

    NameDefault Value
    AppData%USERPROFILE%\Application Data
    Cache%USERPROFILE%\Local Settings\Temporary Internet Files
    Cookies%USERPROFILE%\Cookies
    Desktop%USERPROFILE%\Desktop
    Favorites%USERPROFILE%\Favorites
    History%USERPROFILE%\Local Settings\History
    Local AppData%USERPROFILE%\Local Settings\Application Data
    Local Settings%USERPROFILE%\Local Settings
    My Pictures%USERPROFILE%\My Documents\My Pictures
    NetHood%USERPROFILE%\NetHood
    Personal%USERPROFILE%\My Documents
    PrintHood%USERPROFILE%\PrintHood
    Programs%USERPROFILE%\Start Menu\Programs
    Recent%USERPROFILE%\Recent
    SendTo%USERPROFILE%\SendTo
    Start Menu%USERPROFILE%\Start Menu
    Startup%USERPROFILE%\Start Menu\Programs\Startup
    Templates%USERPROFILE%\Templates

    -

    -There is also an entry called "Default" that has no value set. The default entry is of type REG_SZ, all -the others are of type REG_EXPAND_SZ. -

    -It makes a huge difference to the speed of handling roaming user profiles if all the folders are -stored on a dedicated location on a network server. This means that it will NOT be necessary to -write the Outlook PST file over the network for every login and logout. -

    -To set this to a network location you could use the following examples: -

    %LOGONSERVER%\%USERNAME%\Default Folders

    -This would store the folders in the user's home directory under a directory called Default Folders -You could also use: -

    \\SambaServer\FolderShare\%USERNAME%

    - in which case the default folders will be stored in the server named SambaServer -in the share called FolderShare under a directory that has the name of the MS Windows -user as seen by the Linux/UNIX file system. -

    -Please note that once you have created a default profile share, you MUST migrate a user's profile -(default or custom) to it. -

    -MS Windows 200x/XP profiles may be Local or Roaming. -A roaming profile will be cached locally unless the following registry key is created: -

    -

    -HKEY_LOCAL_MACHINE\SYSTEM\Software\Microsoft\Windows NT\CurrentVersion\
    +C:\Windows NT\Profiles. Under this directory on a clean install there will be three
    +(3) directories: Administrator, All
    +Users, and Default
    +User. 

    The All Users directory contains menu settings that are common across all +system users. The Default User directory contains menu entries that are customizable +per user depending on the profile settings chosen/created.

    When a new user first logs onto an MS Windows NT4 machine, a new profile is created from:

    • All Users settings.

    • Default User settings (contains the default NTUser.DAT file).

    When a user logs onto an MS Windows NT4 machine that is a member of a Microsoft security domain, + the following steps are followed in respect of profile handling: + + +

    1. The users' account information that is obtained during the logon process + contains the location of the users' desktop profile. The profile path may be local to + the machine or it may be located on a network share. If there exists a profile at the + location of the path from the user account, then this profile is copied to the location + %SystemRoot%\Profiles\%USERNAME%. This profile then inherits the settings + in the All Users profile in the %SystemRoot%\Profiles + location.

    2. If the user account has a profile path, but at its location a profile does not + exist, then a new profile is created in the %SystemRoot%\Profiles\%USERNAME% + directory from reading the Default User profile.

    3. If the NETLOGON share on the authenticating server (logon server) contains + a policy file (NTConfig.POL), then its contents are applied to the + NTUser.DAT which is applied to the HKEY_CURRENT_USER + part of the registry. +

    4. When the user logs out, if the profile is set to be a roaming profile it will be + written out to the location of the profile. The NTuser.DAT file is then + recreated from the contents of the HKEY_CURRENT_USER contents. Thus, + should there not exist in the NETLOGON share an NTConfig.POL at the next + logon, the effect of the previous NTConfig.POL will still be held in the + profile. The effect of this is known as tattooing. +

    MS Windows NT4 profiles may be local or roaming. A local +profile will stored in the %SystemRoot%\Profiles\%USERNAME% location. A roaming +profile will also remain stored in the same way, unless the following registry key is created as shown:

     HKEY_LOCAL_MACHINE\SYSTEM\Software\Microsoft\Windows NT\CurrentVersion\
    +winlogon\"DeleteRoamingCache"=dword:0000000
    + 

    +In this case, the local copy (in %SystemRoot%\Profiles\%USERNAME%) will be deleted +on logout.

    Under MS Windows NT4, default locations for common resources like My Documents +may be redirected to a network share by modifying the following registry keys. These changes may be +affected via use of the System Policy Editor. To do so may require that you create your own template +extension for the policy editor to allow this to be done through the GUI. Another way to do this is by +way of first creating a default user profile, then while logged in as that user, run regedt32 to edit +the key settings.

    +The Registry Hive key that affects the behavior of folders that are part of the default user +profile are controlled by entries on Windows NT4 is: +

    +HKEY_CURRENT_USER
    +	\Software
    +		\Microsoft
    +			\Windows
    +				\CurrentVersion
    +					\Explorer
    +						\User Shell Folders
    +

    + +

    The above hive key contains a list of automatically managed folders. The default entries are shown in .

    Table 24.1. User Shell Folder Registry Keys Default Values

    NameDefault Value
    AppData%USERPROFILE%\Application Data
    Desktop%USERPROFILE%\Desktop
    Favorites%USERPROFILE%\Favorites
    NetHood%USERPROFILE%\NetHood
    PrintHood%USERPROFILE%\PrintHood
    Programs%USERPROFILE%\Start Menu\Programs
    Recent%USERPROFILE%\Recent
    SendTo%USERPROFILE%\SendTo
    Start Menu %USERPROFILE%\Start Menu
    Startup%USERPROFILE%\Start Menu\Programs\Startup

    The registry key that contains the location of the default profile settings is:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\ +User Shell Folders

    The default entries are shown in .

    Table 24.2. Defaults of Profile Settings Registry Keys

    Common Desktop%SystemRoot%\Profiles\All Users\Desktop
    Common Programs%SystemRoot%\Profiles\All Users\Programs
    Common Start Menu%SystemRoot%\Profiles\All Users\Start Menu
    Common Startup%SystemRoot%\Profiles\All Users\Start Menu\Programs\Startup

    MS Windows 200x/XP

    Note

    + +MS Windows XP Home Edition does use default per user profiles, but cannot participate +in domain security, cannot log onto an NT/ADS-style domain, and thus can obtain the profile only +from itself. While there are benefits in doing this, the beauty of those MS Windows clients that +can participate in domain logon processes allows the administrator to create a global default +profile and enforce it through the use of Group Policy Objects (GPOs). +

    When a new user first logs onto an MS Windows 200x/XP machine, the default profile is obtained from +C:\Documents and Settings\Default User. The administrator can modify or change the +contents of this location and MS Windows 200x/XP will gladly use it. This is far from the optimum arrangement +since it will involve copying a new default profile to every MS Windows 200x/XP client workstation.

    When MS Windows 200x/XP participates in a domain security context, and if the default user profile is + not found, then the client will search for a default profile in the NETLOGON share of the authenticating + server. In MS Windows parlance,%LOGONSERVER%\NETLOGON\Default User, and if one +exists there it will copy this to the workstation to the C:\Documents and Settings\ +under the Windows login name of the user.

    Note

    This path translates, in Samba parlance, to the smb.conf +[NETLOGON] share. The directory should be created at the root +of this share and must be called Default Profile.

    If a default profile does not exist in this location, then MS Windows 200x/XP will use the local +default profile.

    On logging out, the users' desktop profile will be stored to the location specified in the registry +settings that pertain to the user. If no specific policies have been created or passed to the client +during the login process (as Samba does automatically), then the user's profile will be written to the +local machine only under the path C:\Documents and Settings\%USERNAME%.

    Those wishing to modify the default behavior can do so through these three methods:

    • Modify the registry keys on the local machine manually and place the new + default profile in the NETLOGON share root. This is not recommended as it is maintenance intensive. +

    • Create an NT4-style NTConfig.POL file that specified this behavior and locate + this file in the root of the NETLOGON share along with the new default profile.

    • Create a GPO that enforces this through Active Directory, and place the new + default profile in the NETLOGON share.

    The registry hive key that effects the behavior of folders that are part of the default user +profile are controlled by entries on Windows 200x/XP is:

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell +Folders\

    +The above hive key contains a list of automatically managed folders. The default entries are shown +in + +

    Table 24.3. Defaults of Default User Profile Paths Registry Keys

    NameDefault Value
    AppData%USERPROFILE%\Application Data
    Cache%USERPROFILE%\Local Settings\Temporary Internet Files
    Cookies%USERPROFILE%\Cookies
    Desktop%USERPROFILE%\Desktop
    Favorites%USERPROFILE%\Favorites
    History%USERPROFILE%\Local Settings\History
    Local AppData%USERPROFILE%\Local Settings\Application Data
    Local Settings%USERPROFILE%\Local Settings
    My Pictures%USERPROFILE%\My Documents\My Pictures
    NetHood%USERPROFILE%\NetHood
    Personal%USERPROFILE%\My Documents
    PrintHood%USERPROFILE%\PrintHood
    Programs%USERPROFILE%\Start Menu\Programs
    Recent%USERPROFILE%\Recent
    SendTo%USERPROFILE%\SendTo
    Start Menu%USERPROFILE%\Start Menu
    Startup%USERPROFILE%\Start Menu\Programs\Startup
    Templates%USERPROFILE%\Templates

    There is also an entry called “Default” that has no value set. The default entry is +of type REG_SZ, all the others are of type REG_EXPAND_SZ.

    It makes a huge difference to the speed of handling roaming user profiles if all the folders are +stored on a dedicated location on a network server. This means that it will not be necessary to write +the Outlook PST file over the network for every login and logout.

    To set this to a network location, you could use the following examples:

    %LOGONSERVER%\%USERNAME%\Default Folders

    This would store the folders in the user's home directory under a directory called Default +Folders. You could also use:

    \\SambaServer\FolderShare\%USERNAME%

    +in which case the default folders will be stored in the server named SambaServer +in the share called FolderShare under a directory that has the name of the +MS Windows user as seen by the Linux/UNIX file system.

    Please note that once you have created a default profile share, you MUST migrate a user's profile +(default or custom) to it.

    MS Windows 200x/XP profiles may be Local or Roaming. + A roaming profile will be cached locally unless the following registry key is created: + + +

     HKEY_LOCAL_MACHINE\SYSTEM\Software\Microsoft\Windows NT\CurrentVersion\
     	winlogon\"DeleteRoamingCache"=dword:00000001

    -In which case, the local cache copy will be deleted on logout. -

    Common Errors

    -The following are some typical errors/problems/questions that have been asked. -

    Setting up roaming profiles for just a few user's or group's?

    -With samba-2.2.x the choice you have is to enable or disable roaming -profiles support. It is a global only setting. The default is to have -roaming profiles and the default path will locate them in the user's home -directory. -

    -If disabled globally then no-one will have roaming profile ability. -If enabled and you want it to apply only to certain machines, then on -those machines on which roaming profile support is NOT wanted it is then -necessary to disable roaming profile handling in the registry of each such -machine. -

    -With samba-3 you can have a global profile -setting in smb.conf _AND_ you can over-ride this by per-user settings -using the Domain User Manager (as with MS Windows NT4/ Win 2Kx). -

    -In any case, you can configure only one profile per user. That profile can -be either: -

    • A profile unique to that user

    • A mandatory profile (one the user can not change)

    • A group profile (really should be mandatory ie:unchangable)

    Can NOT use Roaming Profiles

    -A user requested the following: -“ -I do not want Roaming profiles to be implemented. I want to give users a local profile alone. ... -Please help me I am totally lost with this error. For the past two days I tried everything, I googled -around but found no useful pointers. Please help me. -

    -The choices are: -

    Local profiles:

    - I know of no registry keys that will allow auto-deletion of LOCAL profiles on log out -

    Roaming profiles:

    - As a user logs onto the network a centrally stored profile is copied to the workstation - to form a local profile. This local profile will persist (remain on the workstation disk) - unless a registry key is changed that will cause this profile to be automatically deleted - on logout. -

    -The Roaming Profile choices are: -

    Personal Roaming profiles

    - These are typically stored in a profile share on a central (or conveniently located - local) server. -

    - Workstations 'cache' (store) a local copy of the profile. This cached copy is used when - the profile can not be downloaded at next logon. -

    Group profiles

    These are loaded from a central profile server

    Mandatory profiles

    - Mandatory profiles can be created for a user as well as for any group that a user - is a member of. Mandatory profiles can NOT be changed by ordinary users. Only the administrator - can change or reconfigure a mandatory profile. -

    -A WinNT4/2K/XP profile can vary in size from 130KB to off the scale. -Outlook PST files are most often part of the profile and can be many GB in -size. On average (in a well controlled environment) roaming profile size of -2MB is a good rule of thumb to use for planning purposes. In an -undisciplined environment I have seen up to 2GB profiles. Users tend to -complain when it take an hour to log onto a workstation but they harvest -the fruits of folly (and ignorance). -

    -The point of all the above is to show that roaming profiles and good -controls of how they can be changed as well as good discipline make up for -a problem free site. -

    -Microsoft's answer to the PST problem is to store all email in an MS -Exchange Server back-end. This removes the need for a PST file. -

    -LOCAL profiles mean: -

    • If each machine is used my many users then much local disk storage is needed for local profiles

    • Every workstation the user logs into has it's own profile, these can be very different from machine to machine

    -On the other hand, use of roaming profiles means: -

    • The network administrator can control the desktop environment of all users.

    • Use of mandatory profiles drasitcally reduces network management overheads.

    • In the long run users will be experience fewer problems.

    Changing the default profile

    -Question: -“ -When the client logs onto the domain controller it searches for a profile to download, -where do I put this default profile? -

    -Firstly, the samba server needs to be configured as a domain controller. -This can be done by setting in smb.conf: -

    security = user
    os level = 32 (or more)
    domain logons = Yes

    -There must be an [netlogon] share that is world readable. -It is a good idea to add a logon script to pre-set printer and -drive connections. There is also a facility for automatically -synchronizing the workstation time clock with that of the logon -server (another good thing to do). -

    Note

    -To invoke auto-deletion of roaming profile from the local -workstation cache (disk storage) use the Group Policy Editor -to create a file called NTConfig.POL with the appropriate entries. This -file needs to be located in the netlogon share root directory.

    -Windows clients need to be members of the domain. Workgroup machines do NOT use network logons so -they do not interoperate with domain profiles. -

    -For roaming profiles add to smb.conf: -

    -

    logon path = \\%N\profiles\%U
    # Default logon drive is Z:
    logon drive = H:
    # This requires a PROFILES share that is world writable.

    -

    Chapter 25. PAM based Distributed Authentication

    John H. Terpstra

    Samba Team

    Stephen Langasek

    May 31, 2003

    -This chapter you should help you to deploy winbind based authentication on any PAM enabled -UNIX/Linux system. Winbind can be used to enable user level application access authentication -from any MS Windows NT Domain, MS Windows 200x Active Directory based domain, or any Samba -based domain environment. It will also help you to configure PAM based local host access +In this case, the local cache copy will be deleted on logout. +

    Common Errors

    +The following are some typical errors, problems and questions that have been asked on the Samba mailing lists. +

    Configuring Roaming Profiles for a Few Users or Groups

    +With Samba-2.2.x, the choice you have is to enable or disable roaming profiles support. It is a +global only setting. The default is to have roaming profiles and the default path will locate them in +the user's home directory. +

    +If disabled globally, then no one will have roaming profile ability. If enabled and you want it +to apply only to certain machines, then on those machines on which roaming profile support is not wanted +it is then necessary to disable roaming profile handling in the registry of each such machine. +

    +With Samba-3, you can have a global profile setting in smb.conf and you can override this by +per-user settings using the Domain User Manager (as with MS Windows NT4/ Win 200xx).

    In any case, you can configure only one profile per user. That profile can be either:

    • A profile unique to that user.
    • A mandatory profile (one the user cannot change).
    • A group profile (really should be mandatory, that is unchangable).

    Cannot Use Roaming Profiles

    A user requested the following: “ I do not want Roaming profiles to be implemented. I want +to give users a local profile alone. Please help me, I am totally lost with this error. For the past +two days I tried everything, I googled around but found no useful pointers. Please help me.

    The choices are:

    Local profiles

    I know of no registry keys that will allow + auto-deletion of LOCAL profiles on log out.

    Roaming profiles

    As a user logs onto the network, a centrally + stored profile is copied to the workstation to form a local profile. This local profile + will persist (remain on the workstation disk) unless a registry key is changed that will + cause this profile to be automatically deleted on logout.

    The roaming profile choices are:

    Personal roaming profiles

    These are typically stored in + a profile share on a central (or conveniently located local) server.

    Workstations cache (store) a local copy of the profile. This cached + copy is used when the profile cannot be downloaded at next logon.

    Group profiles

    These are loaded from a central profile + server.

    Mandatory profiles

    Mandatory profiles can be created for + a user as well as for any group that a user is a member of. Mandatory profiles cannot be + changed by ordinary users. Only the administrator can change or reconfigure a mandatory + profile.

    A Windows NT4/200x/XP profile can vary in size from 130KB to very large. Outlook PST files are +most often part of the profile and can be many GB in size. On average (in a well controlled environment), +roaming profile size of 2MB is a good rule of thumb to use for planning purposes. In an undisciplined +environment, I have seen up to 2GB profiles. Users tend to complain when it takes an hour to log onto a +workstation but they harvest the fruits of folly (and ignorance).

    The point of all the above is to show that roaming profiles and good controls of how they can be +changed as well as good discipline make up for a problem-free site.

    Microsoft's answer to the PST problem is to store all email in an MS Exchange Server backend. This +removes the need for a PST file.

    Local profiles mean:

    • If each machine is used by many users, then much local disk storage is needed + for local profiles.

    • Every workstation the user logs into has + its own profile; these can be very different from machine to machine.

    On the other hand, use of roaming profiles means:

    • The network administrator can control the desktop environment of all users.

    • Use of mandatory profiles drastically reduces network management overheads.

    • In the long run, users will experience fewer problems.

    Changing the Default Profile

    When the client logs onto the Domain Controller, it searches +for a profile to download. Where do I put this default profile?

    + +First, the Samba server needs to be configured as a Domain Controller. This can be done by +setting in smb.conf:

    security = user
    os level = 32 (or more)
    domain logons = Yes

    There must be a [netlogon] share that is world readable. It is +a good idea to add a logon script to pre-set printer and drive connections. There is also a facility +for automatically synchronizing the workstation time clock with that of the logon server (another good +thing to do).

    Note

    To invoke auto-deletion of roaming profile from the local workstation cache (disk storage), use +the Group Policy Editor to create a file called NTConfig.POL +with the appropriate entries. This file needs to be located in the netlogon +share root directory.

    Windows clients need to be members of the domain. Workgroup machines do not use network logons +so they do not interoperate with domain profiles.

    For roaming profiles, add to smb.conf:

    logon path = \\%N\profiles\%U
    # Default logon drive is Z:
    logon drive = H:
    # This requires a PROFILES share that is world writable.

    Chapter 25. PAM-Based Distributed Authentication

    John H. Terpstra

    Samba Team

    Stephen Langasek

    May 31, 2003

    +This chapter should help you to deploy Winbind-based authentication on any PAM-enabled +UNIX/Linux system. Winbind can be used to enable User-Level application access authentication +from any MS Windows NT Domain, MS Windows 200x Active Directory-based +domain, or any Samba-based domain environment. It will also help you to configure PAM-based local host access controls that are appropriate to your Samba configuration.

    -In addition to knowing how to configure winbind into PAM, you will learn generic PAM management -possibilities and in particular how to deploy tools like pam_smbpass.so to your advantage. +In addition to knowing how to configure Winbind into PAM, you will learn generic PAM management +possibilities and in particular how to deploy tools like pam_smbpass.so to your advantage.

    Note

    -The use of Winbind require more than PAM configuration alone. Please refer to the Winbind chapter. -

    Features and Benefits

    -A number of UNIX systems (eg: Sun Solaris), as well as the xxxxBSD family and Linux, +The use of Winbind requires more than PAM configuration alone. +Please refer to , for further information regarding Winbind. +

    Features and Benefits

    +A number of UNIX systems (e.g., Sun Solaris), as well as the xxxxBSD family and Linux, now utilize the Pluggable Authentication Modules (PAM) facility to provide all authentication, authorization and resource control services. Prior to the introduction of PAM, a decision to use an alternative to the system password database (/etc/passwd) would require the provision of alternatives for all programs that provide security services. -Such a choice would involve provision of alternatives to such programs as: login, -passwd, chown, etc. +Such a choice would involve provision of alternatives to programs such as: login, +passwd, chown, and so on.

    PAM provides a mechanism that disconnects these security programs from the underlying -authentication/authorization infrastructure. PAM is configured either through one file -/etc/pam.conf (Solaris), or by editing individual files that are +authentication/authorization infrastructure. PAM is configured by making appropriate modifications to one file +/etc/pam.conf (Solaris), or by editing individual control files that are located in /etc/pam.d.

    -On PAM enabled UNIX/Linux systems it is an easy matter to configure the system to use any -authentication backend, so long as the appropriate dynamically loadable library modules -are available for it. The backend may be local to the system, or may be centralised on a +On PAM-enabled UNIX/Linux systems, it is an easy matter to configure the system to use any +authentication backend so long as the appropriate dynamically loadable library modules +are available for it. The backend may be local to the system, or may be centralized on a remote server.

    PAM support modules are available for: -

    /etc/passwd:

    +

    /etc/passwd

    There are several PAM modules that interact with this standard UNIX user - database. The most common are called: pam_unix.so, pam_unix2.so, pam_pwdb.so - and pam_userdb.so. -

    Kerberos:

    - The pam_krb5.so module allows the use of any Kerberos compliant server. + database. The most common are called: pam_unix.so, pam_unix2.so, pam_pwdb.so + and pam_userdb.so. +

    Kerberos

    + The pam_krb5.so module allows the use of any Kerberos compliant server. This tool is used to access MIT Kerberos, Heimdal Kerberos, and potentially Microsoft Active Directory (if enabled). -

    LDAP:

    - The pam_ldap.so module allows the use of any LDAP v2 or v3 compatible backend +

    LDAP

    + The pam_ldap.so module allows the use of any LDAP v2 or v3 compatible backend server. Commonly used LDAP backend servers include: OpenLDAP v2.0 and v2.1, Sun ONE iDentity server, Novell eDirectory server, Microsoft Active Directory. -

    NetWare Bindery:

    - The pam_ncp_auth.so module allows authentication off any bindery enabled - NetWare Core Protocol based server. -

    SMB Password:

    - This module, called pam_smbpass.so, will allow user authentication off +

    NetWare Bindery

    + The pam_ncp_auth.so module allows authentication off any bindery-enabled + NetWare Core Protocol-based server. +

    SMB Password

    + This module, called pam_smbpass.so, will allow user authentication off the passdb backend that is configured in the Samba smb.conf file. -

    SMB Server:

    - The pam_smb_auth.so module is the original MS Windows networking authentication +

    SMB Server

    + The pam_smb_auth.so module is the original MS Windows networking authentication tool. This module has been somewhat outdated by the Winbind module. -

    Winbind:

    - The pam_winbind.so module allows Samba to obtain authentication from any +

    Winbind

    + The pam_winbind.so module allows Samba to obtain authentication from any MS Windows Domain Controller. It can just as easily be used to authenticate - users for access to any PAM enabled application. -

    RADIUS:

    + users for access to any PAM-enabled application. +

    RADIUS

    There is a PAM RADIUS (Remote Access Dial-In User Service) authentication - module. In most cases the administrator will need to locate the source code + module. In most cases, administrators will need to locate the source code for this tool and compile and install it themselves. RADIUS protocols are used by many routers and terminal servers.

    -Of the above, Samba provides the pam_smbpasswd.so and the pam_winbind.so modules alone. +Of the above, Samba provides the pam_smbpasswd.so and the pam_winbind.so modules alone.

    Once configured, these permit a remarkable level of flexibility in the location and use -of distributed samba domain controllers that can provide wide are network bandwidth -efficient authentication services for PAM capable systems. In effect, this allows the -deployment of centrally managed and maintained distributed authentication from a single -user account database. -

    Technical Discussion

    +of distributed Samba Domain Controllers that can provide wide area network bandwidth +efficient authentication services for PAM-capable systems. In effect, this allows the +deployment of centrally managed and maintained distributed authentication from a +single-user account database. +

    Technical Discussion

    PAM is designed to provide the system administrator with a great deal of flexibility in configuration of the privilege granting applications of their system. The local configuration of system security controlled by PAM is contained in one of two places: -either the single system file, /etc/pam.conf; or the /etc/pam.d/ directory. -

    PAM Configuration Syntax

    +either the single system file, /etc/pam.conf, or the +/etc/pam.d/ directory. +

    PAM Configuration Syntax

    In this section we discuss the correct syntax of and generic options respected by entries to these files. -PAM specific tokens in the configuration file are case insensitive. The module paths, however, are case -sensitive since they indicate a file's name and reflect the case dependence of typical file-systems. +PAM-specific tokens in the configuration file are case insensitive. The module paths, however, are case +sensitive since they indicate a file's name and reflect the case +dependence of typical file systems. The case-sensitivity of the arguments to any given module is defined for each module in turn.

    In addition to the lines described below, there are two special characters provided for the convenience -of the system administrator: comments are preceded by a `#' and extend to the next end-of-line; also, -module specification lines may be extended with a `\' escaped newline. +of the system administrator: comments are preceded by a “#” and extend to the next end-of-line; also, +module specification lines may be extended with a “\” escaped newline.

    If the PAM authentication module (loadable link library file) is located in the -default location then it is not necessary to specify the path. In the case of +default location, then it is not necessary to specify the path. In the case of Linux, the default location is /lib/security. If the module -is located outside the default then the path must be specified as: +is located outside the default, then the path must be specified as:

     auth  required  /other_path/pam_strange_module.so
     

    -

    Anatomy of /etc/pam.d Entries

    +

    Anatomy of /etc/pam.d Entries

    The remaining information in this subsection was taken from the documentation of the Linux-PAM project. For more information on PAM, see -The Official Linux-PAM home page +The Official Linux-PAM home page.

    -A general configuration line of the /etc/pam.conf file has the following form: +A general configuration line of the /etc/pam.conf file has the following form:

     service-name   module-type   control-flag   module-path   args
    @@ -13210,36 +13185,38 @@ service-name   module-type   control-flag   module-path   args
     Below, we explain the meaning of each of these tokens. The second (and more recently adopted)
     way of configuring Linux-PAM is via the contents of the /etc/pam.d/ directory.
     Once we have explained the meaning of the above tokens, we will describe this method.
    -

    service-name:

    - The name of the service associated with this entry. Frequently the service name is the conventional - name of the given application. For example, `ftpd', `rlogind' and `su', etc. . +

    service-name

    + The name of the service associated with this entry. Frequently, the service name is the conventional + name of the given application. For example, ftpd, rlogind and + su, and so on.

    - There is a special service-name, reserved for defining a default authentication mechanism. It has - the name `OTHER' and may be specified in either lower or upper case characters. Note, when there - is a module specified for a named service, the `OTHER' entries are ignored. -

    module-type:

    + There is a special service-name reserved for defining a default authentication mechanism. It has + the name OTHER and may be specified in either lower- or upper-case characters. + Note, when there is a module specified for a named service, the OTHER + entries are ignored. +

    module-type

    One of (currently) four types of module. The four types are as follows:

    • - auth: this module type provides two aspects of authenticating the user. - Firstly, it establishes that the user is who they claim to be, by instructing the application + auth: This module type provides two aspects of authenticating the user. + It establishes that the user is who he claims to be by instructing the application to prompt the user for a password or other means of identification. Secondly, the module can grant group membership (independently of the /etc/groups file discussed above) or other privileges through its credential granting properties.

    • - account: this module performs non-authentication based account management. + account: This module performs non-authentication-based account management. It is typically used to restrict/permit access to a service based on the time of day, currently available system resources (maximum number of users) or perhaps the location of the applicant - user `root' login only on the console. + user “root” login only on the console.

    • - session: primarily, this module is associated with doing things that need - to be done for the user before/after they can be given service. Such things include the logging - of information concerning the opening/closing of some data exchange with a user, mounting - directories, etc. + session: Primarily, this module is associated with doing things that need + to be done for the user before and after they can be given service. Such things include the logging + of information concerning the opening and closing of some data exchange with a user, mounting + directories, and so on.

    • - password: this last module type is required for updating the authentication - token associated with the user. Typically, there is one module for each `challenge/response' - based authentication (auth) module-type. -

    control-flag:

    + password: This last module type is required for updating the authentication + token associated with the user. Typically, there is one module for each “challenge/response” + -based authentication (auth) module type. +

    control-flag

    The control-flag is used to indicate how the PAM library will react to the success or failure of the module it is associated with. Since modules can be stacked (modules of the same type execute in series, one after another), the control-flags determine the relative importance of each module. The application @@ -13251,129 +13228,135 @@ Once we have explained the meaning of the above tokens, we will describe this me

    The simpler (and historical) syntax for the control-flag is a single keyword defined to indicate the severity of concern associated with the success or failure of a specific module. There are four such - keywords: required, requisite, sufficient and optional. + keywords: required, requisite, sufficient and optional.

    The Linux-PAM library interprets these keywords in the following manner:

    • - required: this indicates that the success of the module is required for the + required: This indicates that the success of the module is required for the module-type facility to succeed. Failure of this module will not be apparent to the user until all of the remaining modules (of the same module-type) have been executed.

    • - requisite: like required, however, in the case that such a module returns a + requisite: Like required, however, in the case that such a module returns a failure, control is directly returned to the application. The return value is that associated with - the first required or requisite module to fail. Note, this flag can be used to protect against the + the first required or requisite module to fail. This flag can be used to protect against the possibility of a user getting the opportunity to enter a password over an unsafe medium. It is conceivable that such behavior might inform an attacker of valid accounts on a system. This possibility should be weighed against the not insignificant concerns of exposing a sensitive password in a hostile environment.

    • - sufficient: the success of this module is deemed `sufficient' to satisfy + sufficient: The success of this module is deemed sufficient to satisfy the Linux-PAM library that this module-type has succeeded in its purpose. In the event that no - previous required module has failed, no more `stacked' modules of this type are invoked. (Note, - in this case subsequent required modules are not invoked.). A failure of this module is not deemed + previous required module has failed, no more “stacked” modules of this type are invoked. + (In this case, subsequent required modules are not invoked). A failure of this module is not deemed as fatal to satisfying the application that this module-type has succeeded.

    • - optional: as its name suggests, this control-flag marks the module as not + optional: As its name suggests, this control-flag marks the module as not being critical to the success or failure of the user's application for service. In general, Linux-PAM ignores such a module when determining if the module stack will succeed or fail. However, in the absence of any definite successes or failures of previous or subsequent stacked - modules this module will determine the nature of the response to the application. One example of + modules, this module will determine the nature of the response to the application. One example of this latter case, is when the other modules return something like PAM_IGNORE.

    The more elaborate (newer) syntax is much more specific and gives the administrator a great deal of control over how the user is authenticated. This form of the control flag is delimited with square brackets and - consists of a series of value=action tokens: + consists of a series of value=action tokens:

     [value1=action1 value2=action2 ...]
     

    - Here, value1 is one of the following return values: success; open_err; symbol_err; service_err; - system_err; buf_err; perm_denied; auth_err; cred_insufficient; authinfo_unavail; user_unknown; maxtries; - new_authtok_reqd; acct_expired; session_err; cred_unavail; cred_expired; cred_err; no_module_data; conv_err; - authtok_err; authtok_recover_err; authtok_lock_busy; authtok_disable_aging; try_again; ignore; abort; - authtok_expired; module_unknown; bad_item; and default. The last of these (default) can be used to set - the action for those return values that are not explicitly defined. + Here, value1 is one of the following return values: +

    +success; open_err; symbol_err; service_err; system_err; buf_err;
    +perm_denied; auth_err; cred_insufficient; authinfo_unavail;
    +user_unknown; maxtries; new_authtok_reqd; acct_expired; session_err;
    +cred_unavail; cred_expired; cred_err; no_module_data; conv_err;
    +authtok_err; authtok_recover_err; authtok_lock_busy;
    +authtok_disable_aging; try_again; ignore; abort; authtok_expired;
    +module_unknown; bad_item; and default.
    +

    +

    + The last of these (default) can be used to set the action for those return values that are not explicitly defined.

    - The action1 can be a positive integer or one of the following tokens: ignore; ok; done; bad; die; and reset. + The action1 can be a positive integer or one of the following tokens: + ignore; ok; done; bad; die; and reset. A positive integer, J, when specified as the action, can be used to indicate that the next J modules of the current module-type will be skipped. In this way, the administrator can develop a moderately sophisticated stack of modules with a number of different paths of execution. Which path is taken can be determined by the reactions of individual modules.

    • - ignore: when used with a stack of modules, the module's return status will not + ignore: When used with a stack of modules, the module's return status will not contribute to the return code the application obtains.

    • - bad: this action indicates that the return code should be thought of as indicative + bad: This action indicates that the return code should be thought of as indicative of the module failing. If this module is the first in the stack to fail, its status value will be used for that of the whole stack.

    • - die: equivalent to bad with the side effect of terminating the module stack and + die: Equivalent to bad with the side effect of terminating the module stack and PAM immediately returning to the application.

    • - ok: this tells PAM that the administrator thinks this return code should + ok: This tells PAM that the administrator thinks this return code should contribute directly to the return code of the full stack of modules. In other words, if the former state of the stack would lead to a return of PAM_SUCCESS, the module's return code will override this value. Note, if the former state of the stack holds some value that is indicative of a modules - failure, this 'ok' value will not be used to override that value. + failure, this ok value will not be used to override that value.

    • - done: equivalent to ok with the side effect of terminating the module stack and + done: Equivalent to ok with the side effect of terminating the module stack and PAM immediately returning to the application.

    • - reset: clear all memory of the state of the module stack and start again with + reset: Clears all memory of the state of the module stack and starts again with the next stacked module.

    - Each of the four keywords: required; requisite; sufficient; and optional, have an equivalent expression in - terms of the [...] syntax. They are as follows: + Each of the four keywords: required; requisite; sufficient; and optional, + have an equivalent expression in terms of the [...] syntax. They are as follows:

    • - required is equivalent to [success=ok new_authtok_reqd=ok ignore=ignore default=bad] + required is equivalent to [success=ok new_authtok_reqd=ok ignore=ignore default=bad].

    • - requisite is equivalent to [success=ok new_authtok_reqd=ok ignore=ignore default=die] + requisite is equivalent to [success=ok new_authtok_reqd=ok ignore=ignore default=die].

    • - sufficient is equivalent to [success=done new_authtok_reqd=done default=ignore] + sufficient is equivalent to [success=done new_authtok_reqd=done default=ignore].

    • - optional is equivalent to [success=ok new_authtok_reqd=ok default=ignore] + optional is equivalent to [success=ok new_authtok_reqd=ok default=ignore].

    Just to get a feel for the power of this new syntax, here is a taste of what you can do with it. With Linux-PAM-0.63, the notion of client plug-in agents was introduced. This is something that makes it possible for PAM to support machine-machine authentication using the transport protocol inherent to the client/server application. With the - [ ... value=action ... ] control syntax, it is possible for an application to be configured + [ ... value=action ... ] control syntax, it is possible for an application to be configured to support binary prompts with compliant clients, but to gracefully fall over into an alternative authentication - mode for older, legacy, applications. -

    module-path:

    + mode for older, legacy applications. +

    module-path

    The path-name of the dynamically loadable object file; the pluggable module itself. If the first character of the - module path is `/', it is assumed to be a complete path. If this is not the case, the given module path is appended + module path is “/”, it is assumed to be a complete path. If this is not the case, the given module path is appended to the default module path: /lib/security (but see the notes above).

    - The args are a list of tokens that are passed to the module when it is invoked. Much like arguments to a typical + The arguments are a list of tokens that are passed to the module when it is invoked, much like arguments to a typical Linux shell command. Generally, valid arguments are optional and are specific to any given module. Invalid arguments are ignored by a module, however, when encountering an invalid argument, the module is required to write an error - to syslog(3). For a list of generic options see the next section. + to syslog(3). For a list of generic options, see the next section.

    - Note, if you wish to include spaces in an argument, you should surround that argument with square brackets. For example: + If you wish to include spaces in an argument, you should surround that argument with square brackets. For example:

     squid auth required pam_mysql.so user=passwd_query passwd=mada \
    -        db=eminence [query=select user_name from internet_service where \
    -                     user_name='%u' and password=PASSWORD('%p') and \
    -                     service='web_proxy']
    +db=eminence [query=select user_name from internet_service where \
    +user_name=“%u” and password=PASSWORD(“%p”) and service=“web_proxy”]
     

    - Note, when using this convention, you can include `[' characters inside the string, and if you wish to include a `]' - character inside the string that will survive the argument parsing, you should use `\['. In other words: + When using this convention, you can include “[” characters inside the string, and if you wish to have a “]” + character inside the string that will survive the argument parsing, you should use “\[”. In other words:

     [..[..\]..]    -->   ..[..]..
     

    - Any line in (one of) the configuration file(s), that is not formatted correctly, will generally tend (erring on the + Any line in one of the configuration files that is not formatted correctly will generally tend (erring on the side of caution) to make the authentication process fail. A corresponding error is written to the system log files with a call to syslog(3). -

    Example System Configurations

    +

    Example System Configurations

    The following is an example /etc/pam.d/login configuration file. -This example had all options been uncommented is probably not usable -as it stacks many conditions before allowing successful completion +This example had all options uncommented and is probably not usable +because it stacks many conditions before allowing successful completion of the login process. Essentially all conditions can be disabled -by commenting them out except the calls to pam_pwdb.so. -

    PAM: original login config

    +by commenting them out, except the calls to pam_pwdb.so.
    +

    PAM: Original Login Config

     #%PAM-1.0
    -# The PAM configuration file for the `login' service
    +# The PAM configuration file for the “login” service
     #
     auth         required    pam_securetty.so
     auth         required    pam_nologin.so
    @@ -13386,7 +13369,7 @@ session      required    pam_pwdb.so
     # session    optional    pam_lastlog.so
     # password   required    pam_cracklib.so retry=3
     password     required    pam_pwdb.so shadow md5
    -

    PAM: login using pam_smbpass

    +

    PAM: Login Using pam_smbpass

    PAM allows use of replaceable modules. Those available on a sample system include:

    $/bin/ls /lib/security

    @@ -13397,17 +13380,17 @@ pam_nologin.so   pam_rootok.so       pam_tally.so
     pam_deny.so      pam_issue.so        pam_mail.so       
     pam_permit.so    pam_securetty.so    pam_time.so       
     pam_dialup.so    pam_lastlog.so      pam_mkhomedir.so  
    -pam_pwdb.so      pam_shells.so       pam_unix.so       
    +pam_pwdb.so      pam_shells.so       pam_UNIX.so       
     pam_env.so       pam_ldap.so         pam_motd.so       
    -pam_radius.so    pam_smbpass.so      pam_unix_acct.so  
    -pam_wheel.so     pam_unix_auth.so    pam_unix_passwd.so
    -pam_userdb.so    pam_warn.so         pam_unix_session.so
    +pam_radius.so    pam_smbpass.so      pam_UNIX_acct.so  
    +pam_wheel.so     pam_UNIX_auth.so    pam_UNIX_passwd.so
    +pam_userdb.so    pam_warn.so         pam_UNIX_session.so
     

    The following example for the login program replaces the use of -the pam_pwdb.so module which uses the system +the pam_pwdb.so module that uses the system password database (/etc/passwd, /etc/shadow, /etc/group) with -the module pam_smbpass.so which uses the Samba +the module pam_smbpass.so, which uses the Samba database which contains the Microsoft MD4 encrypted password hashes. This database is stored in either /usr/local/samba/private/smbpasswd, @@ -13417,13 +13400,13 @@ Samba implementation for your UNIX/Linux system. The pam_smbpass.so module is provided by Samba version 2.2.1 or later. It can be compiled by specifying the --with-pam_smbpass options when running Samba's -configure script. For more information +configure script. For more information on the pam_smbpass module, see the documentation in the source/pam_smbpass directory of the Samba source distribution.

     #%PAM-1.0
    -# The PAM configuration file for the `login' service
    +# The PAM configuration file for the “login” service
     #
     auth        required    pam_smbpass.so nodelay
     account     required    pam_smbpass.so nodelay
    @@ -13434,21 +13417,21 @@ The following is the PAM configuration file for a particular
     Linux system. The default condition uses pam_pwdb.so.
     

     #%PAM-1.0
    -# The PAM configuration file for the `samba' service
    +# The PAM configuration file for the “samba” service
     #
     auth       required     pam_pwdb.so nullok nodelay shadow audit
     account    required     pam_pwdb.so audit nodelay
     session    required     pam_pwdb.so nodelay
     password   required     pam_pwdb.so shadow md5
     

    -In the following example the decision has been made to use the -smbpasswd database even for basic samba authentication. Such a -decision could also be made for the passwd program and would -thus allow the smbpasswd passwords to be changed using the passwd -program. +In the following example, the decision has been made to use the +smbpasswd database even for basic Samba authentication. Such a +decision could also be made for the passwd program and would +thus allow the smbpasswd passwords to be changed using the +passwd program:

     #%PAM-1.0
    -# The PAM configuration file for the `samba' service
    +# The PAM configuration file for the “samba” service
     #
     auth       required     pam_smbpass.so nodelay
     account    required     pam_pwdb.so audit nodelay
    @@ -13461,128 +13444,118 @@ your particular system implementation for details regarding the specific
     capabilities of PAM in this environment. Some Linux implementations also 
     provide the pam_stack.so module that allows all 
     authentication to be configured in a single central file. The 
    -pam_stack.so method has some very devoted followers 
    +pam_stack.so method has some devoted followers 
     on the basis that it allows for easier administration. As with all issues in 
    -life though, every decision makes trade-offs, so you may want examine the 
    +life though, every decision makes trade-offs, so you may want to examine the 
     PAM documentation for further helpful information.
    -

    smb.conf PAM Configuration

    - There is an option in smb.conf called obey pam restrictions. -The following is from the on-line help for this option in SWAT; -

    -When Samba is configured to enable PAM support (i.e. ---with-pam), this parameter will -control whether or not Samba should obey PAM's account -and session management directives. The default behavior -is to use PAM for clear text authentication only and to -ignore any account or session management. Note that Samba always -ignores PAM for authentication in the case of -encrypt passwords = yes. -The reason is that PAM modules cannot support the challenge/response -authentication mechanism needed in the presence of SMB +

    smb.conf PAM Configuration

    + There is an option in smb.conf called obey pam restrictions. +The following is from the online help for this option in SWAT; +

    +When Samba is configured to enable PAM support (i.e., --with-pam), this parameter will +control whether or not Samba should obey PAM's account and session management directives. The default behavior +is to use PAM for cleartext authentication only and to ignore any account or session management. Samba always +ignores PAM for authentication in the case of encrypt passwords = yes. +The reason is that PAM modules cannot support the challenge/response authentication mechanism needed in the presence of SMB password encryption. -

    Default: obey pam restrictions = no

    Remote CIFS Authentication using winbindd.so

    +

    Default: obey pam restrictions = no

    Remote CIFS Authentication Using winbindd.so

    All operating systems depend on the provision of users credentials acceptable to the platform. UNIX requires the provision of a user identifier (UID) as well as a group identifier (GID). These are both simple integer type numbers that are obtained from a password backend such as /etc/passwd.

    -Users and groups on a Windows NT server are assigned a relative id (rid) which is unique for +Users and groups on a Windows NT server are assigned a relative ID (RID) which is unique for the domain when the user or group is created. To convert the Windows NT user or group into -a unix user or group, a mapping between rids and unix user and group ids is required. This +a UNIX user or group, a mapping between RIDs and UNIX user and group IDs is required. This is one of the jobs that winbind performs.

    -As winbind users and groups are resolved from a server, user and group ids are allocated +As Winbind users and groups are resolved from a server, user and group IDs are allocated from a specified range. This is done on a first come, first served basis, although all existing users and groups will be mapped as soon as a client performs a user or group -enumeration command. The allocated unix ids are stored in a database file under the Samba +enumeration command. The allocated UNIX IDs are stored in a database file under the Samba lock directory and will be remembered.

    The astute administrator will realize from this that the combination of pam_smbpass.so, -winbindd, and a distributed passdb backend, such as ldap, will allow the establishment of a -centrally managed, distributed user/password database that can also be used by all PAM (eg: Linux) aware -programs and applications. This arrangement can have particularly potent advantages compared with the use of -Microsoft Active Directory Service (ADS) in so far as reduction of wide area network authentication traffic. +winbindd and a distributed passdb backend, +such as ldap, will allow the establishment of a centrally managed, distributed user/password +database that can also be used by all PAM-aware (e.g., Linux) programs and applications. This arrangement can have +particularly potent advantages compared with the use of Microsoft Active Directory Service (ADS) in so far as +the reduction of wide area network authentication traffic.

    Warning

    -The rid to unix id database is the only location where the user and group mappings are -stored by winbindd. If this file is deleted or corrupted, there is no way for winbindd -to determine which user and group ids correspond to Windows NT user and group rids. -

    Password Synchronization using pam_smbpass.so

    -pam_smbpass is a PAM module which can be used on conforming systems to -keep the smbpasswd (Samba password) database in sync with the unix +The RID to UNIX ID database is the only location where the user and group mappings are +stored by winbindd. If this file is deleted or corrupted, there is no way for winbindd +to determine which user and group IDs correspond to Windows NT user and group RIDs. +

    Password Synchronization Using pam_smbpass.so

    +pam_smbpass is a PAM module that can be used on conforming systems to +keep the smbpasswd (Samba password) database in sync with the UNIX password file. PAM (Pluggable Authentication Modules) is an API supported -under some Unices, such as Solaris, HPUX and Linux, that provides a +under some UNIX operating systems, such as Solaris, HPUX and Linux, that provides a generic interface to authentication mechanisms.

    -This module authenticates a local smbpasswd user database. If you require -support for authenticating against a remote SMB server, or if you're -concerned about the presence of suid root binaries on your system, it is -recommended that you use pam_winbind instead. +This module authenticates a local smbpasswd user database. If you require +support for authenticating against a remote SMB server, or if you are +concerned about the presence of SUID root binaries on your system, it is +recommended that you use pam_winbind instead.

    -Options recognized by this module are as follows: -

    Table 25.1. Options recognized by pam_smbpass

    debuglog more debugging info
    auditlike debug, but also logs unknown usernames
    use_first_passdon't prompt the user for passwords; take them from PAM_ items instead
    try_first_passtry to get the password from a previous PAM module, fall back to prompting the user
    use_authtoklike try_first_pass, but *fail* if the new PAM_AUTHTOK has not been previously set. (intended for stacking password modules only)
    not_set_passdon't make passwords used by this module available to other modules.
    nodelaydon't insert ~1 second delays on authentication failure.
    nulloknull passwords are allowed.
    nonullnull passwords are not allowed. Used to override the Samba configuration.
    migrateonly meaningful in an "auth" context; used to update smbpasswd file with a password used for successful authentication.
    smbconf=filespecify an alternate path to the smb.conf file.

    +Options recognized by this module are shown in . +

    Table 25.1. Options recognized by pam_smbpass

    debuglog more debugging info.
    auditlike debug, but also logs unknown usernames.
    use_first_passdo not prompt the user for passwords; take them from PAM_ items instead.
    try_first_passtry to get the password from a previous PAM module fall back to prompting the user.
    use_authtoklike try_first_pass, but *fail* if the new PAM_AUTHTOK has not been previously set (intended for stacking password modules only).
    not_set_passdo not make passwords used by this module available to other modules.
    nodelaydo not insert ~1 second delays on authentication failure.
    nulloknull passwords are allowed.
    nonullnull passwords are not allowed. Used to override the Samba configuration.
    migrateonly meaningful in an “auth” context; used to update smbpasswd file with a password used for successful authentication.
    smbconf=filespecify an alternate path to the smb.conf file.

    -

    • Andrew Morgan, for providing the Linux-PAM - framework, without which none of this would have happened

    • Christian Gafton and Andrew Morgan again, for the - pam_pwdb module upon which pam_smbpass was originally based

    • Luke Leighton for being receptive to the idea, - and for the occasional good-natured complaint about the project's status - that keep me working on it :)

    . -

    -The following are examples of the use of pam_smbpass.so in the format of Linux +The following are examples of the use of pam_smbpass.so in the format of Linux /etc/pam.d/ files structure. Those wishing to implement this tool on other platforms will need to adapt this appropriately. -

    Password Synchronisation Configuration

    +

    Password Synchronization Configuration

    A sample PAM configuration that shows the use of pam_smbpass to make -sure private/smbpasswd is kept in sync when /etc/passwd (/etc/shadow) -is changed. Useful when an expired password might be changed by an -application (such as ssh). +sure private/smbpasswd is kept in sync when /etc/passwd (/etc/shadow) +is changed. Useful when an expired password might be changed by an +application (such as ssh).

     #%PAM-1.0
     # password-sync
     #
     auth       requisite    pam_nologin.so
    -auth       required     pam_unix.so
    -account    required     pam_unix.so
    +auth       required     pam_UNIX.so
    +account    required     pam_UNIX.so
     password   requisite    pam_cracklib.so retry=3
    -password   requisite    pam_unix.so shadow md5 use_authtok try_first_pass
    +password   requisite    pam_UNIX.so shadow md5 use_authtok try_first_pass
     password   required     pam_smbpass.so nullok use_authtok try_first_pass
    -session    required     pam_unix.so
    -

    Password Migration Configuration

    -A sample PAM configuration that shows the use of pam_smbpass to migrate -from plaintext to encrypted passwords for Samba. Unlike other methods, +session required pam_UNIX.so +

    Password Migration Configuration

    +A sample PAM configuration that shows the use of pam_smbpass to migrate +from plaintext to encrypted passwords for Samba. Unlike other methods, this can be used for users who have never connected to Samba shares: -password migration takes place when users ftp in, login using ssh, pop -their mail, etc. +password migration takes place when users ftp in, login using ssh, pop +their mail, and so on.

     #%PAM-1.0
     # password-migration
     #
     auth       requisite   pam_nologin.so
    -# pam_smbpass is called IF pam_unix succeeds.
    -auth       requisite   pam_unix.so
    +# pam_smbpass is called IF pam_UNIX succeeds.
    +auth       requisite   pam_UNIX.so
     auth       optional    pam_smbpass.so migrate
    -account    required    pam_unix.so
    +account    required    pam_UNIX.so
     password   requisite   pam_cracklib.so retry=3
    -password   requisite   pam_unix.so shadow md5 use_authtok try_first_pass
    +password   requisite   pam_UNIX.so shadow md5 use_authtok try_first_pass
     password   optional    pam_smbpass.so nullok use_authtok try_first_pass
    -session    required    pam_unix.so
    -

    Mature Password Configuration

    -A sample PAM configuration for a 'mature' smbpasswd installation. -private/smbpasswd is fully populated, and we consider it an error if -the smbpasswd doesn't exist or doesn't match the UNIX password. +session required pam_UNIX.so +

    Mature Password Configuration

    +A sample PAM configuration for a mature smbpasswd installation. +private/smbpasswd is fully populated, and we consider it an error if +the SMB password does not exist or does not match the UNIX password.

     #%PAM-1.0
     # password-mature
     #
     auth       requisite    pam_nologin.so
    -auth       required     pam_unix.so
    -account    required     pam_unix.so
    +auth       required     pam_UNIX.so
    +account    required     pam_UNIX.so
     password   requisite    pam_cracklib.so retry=3
    -password   requisite    pam_unix.so shadow md5 use_authtok try_first_pass
    +password   requisite    pam_UNIX.so shadow md5 use_authtok try_first_pass
     password   required     pam_smbpass.so use_authtok use_first_pass
    -session    required     pam_unix.so
    -

    Kerberos Password Integration Configuration

    -A sample PAM configuration that shows pam_smbpass used together with -pam_krb5. This could be useful on a Samba PDC that is also a member of +session required pam_UNIX.so +

    Kerberos Password Integration Configuration

    +A sample PAM configuration that shows pam_smbpass used together with +pam_krb5. This could be useful on a Samba PDC that is also a member of a Kerberos realm.

     #%PAM-1.0
    @@ -13596,44 +13569,40 @@ password   requisite   pam_cracklib.so retry=3
     password   optional    pam_smbpass.so nullok use_authtok try_first_pass
     password   required    pam_krb5.so use_authtok try_first_pass
     session    required    pam_krb5.so
    -

    Common Errors

    -PAM can be a very fickle and sensitive to configuration glitches. Here we look at a few cases from +

    Common Errors

    +PAM can be fickle and sensitive to configuration glitches. Here we look at a few cases from the Samba mailing list. -

    pam_winbind problem

    - “ - I have the following PAM configuration: - ” +

    pam_winbind Problem

    + A user reported: I have the following PAM configuration:

     auth required /lib/security/pam_securetty.so
     auth sufficient /lib/security/pam_winbind.so
    -auth sufficient /lib/security/pam_unix.so use_first_pass nullok
    +auth sufficient /lib/security/pam_UNIX.so use_first_pass nullok
     auth required /lib/security/pam_stack.so service=system-auth
     auth required /lib/security/pam_nologin.so
     account required /lib/security/pam_stack.so service=system-auth
     account required /lib/security/pam_winbind.so
     password required /lib/security/pam_stack.so service=system-auth
     

    +

    + When I open a new console with [ctrl][alt][F1], I can't log in with my user “pitie”. + I have tried with user “scienceu+pitie” also.

    - “ - When I open a new console with [ctrl][alt][F1], then I cant log in with my user "pitie". - I've tried with user "scienceu+pitie" also. -” -

    - The problem may lie with your inclusion of pam_stack.so + Answer: The problem may lie with your inclusion of pam_stack.so service=system-auth. That file often contains a lot of stuff that may - duplicate what you're already doing. Try commenting out the pam_stack lines - for auth and account and see if things work. If they do, look at + duplicate what you are already doing. Try commenting out the pam_stack lines + for auth and account and see if things work. If they do, look at /etc/pam.d/system-auth and copy only what you need from it into your - /etc/pam.d/login file. Alternatively, if you want all services to use - winbind, you can put the winbind-specific stuff in /etc/pam.d/system-auth. -

    Winbind is not resolving users and groups

    - “ - My smb.conf file is correctly configured. I have specified - idmap uid = 12000, - and idmap gid = 3000-3500 + /etc/pam.d/login file. Alternately, if you want all services to use + Winbind, you can put the Winbind-specific stuff in /etc/pam.d/system-auth. +

    Winbind Is Not Resolving Users and Groups

    + “ + My smb.conf file is correctly configured. I have specified + idmap uid = 12000, + and idmap gid = 3000-3500 and winbind is running. When I do the following it all works fine. -” + ”

     root# wbinfo -u
     MIDEARTH+maryo
    @@ -13656,136 +13625,139 @@ bin:x:1:1:bin:/bin:/bin/bash
     maryo:x:15000:15003:Mary Orville:/home/MIDEARTH/maryo:/bin/false
     

    - But the following command just fails: -” + But this command fails: + ”

    -root# chown 'maryo' a_file
    -chown: `maryo': invalid user
    +root# chown maryo a_file
    +chown: 'maryo': invalid user
     

    -“ -This is driving me nuts! What can be wrong? -” + “This is driving me nuts! What can be wrong?

    - Your system is likely running nscd, the name service - caching daemon. Shut it down, do NOT restart it! You will find your problem resolved. -

    Chapter 26. Integrating MS Windows networks with Samba

    John H. Terpstra

    Samba Team

    (Jan 01 2001)

    + Answer: Your system is likely running nscd, the name service + caching daemon. Shut it down, do not restart it! You will find your problem resolved. +

    Chapter 26. Integrating MS Windows Networks with Samba

    John H. Terpstra

    Samba Team

    (Jan 01 2001)

    + This section deals with NetBIOS over TCP/IP name to IP address resolution. If -your MS Windows clients are NOT configured to use NetBIOS over TCP/IP then this -section does not apply to your installation. If your installation involves use of +your MS Windows clients are not configured to use NetBIOS over TCP/IP, then this +section does not apply to your installation. If your installation +involves the use of NetBIOS over TCP/IP then this section may help you to resolve networking problems.

    Note

    - NetBIOS over TCP/IP has nothing to do with NetBEUI. NetBEUI is NetBIOS - over Logical Link Control (LLC). On modern networks it is highly advised - to NOT run NetBEUI at all. Note also that there is NO such thing as - NetBEUI over TCP/IP - the existence of such a protocol is a complete - and utter mis-apprehension. -

    Features and Benefits

    +NetBIOS over TCP/IP has nothing to do with NetBEUI. NetBEUI is NetBIOS +over Logical Link Control (LLC). On modern networks it is highly advised +to not run NetBEUI at all. Note also there is no such thing as +NetBEUI over TCP/IP the existence of such a protocol is a complete +and utter misapprehension. +

    Features and Benefits

    Many MS Windows network administrators have never been exposed to basic TCP/IP networking as it is implemented in a UNIX/Linux operating system. Likewise, many UNIX and -Linux administrators have not been exposed to the intricacies of MS Windows TCP/IP based +Linux administrators have not been exposed to the intricacies of MS Windows TCP/IP-based networking (and may have no desire to be either).

    This chapter gives a short introduction to the basics of how a name can be resolved to -it's IP address for each operating system environment. -

    Background Information

    -Since the introduction of MS Windows 2000 it is possible to run MS Windows networking +its IP address for each operating system environment. +

    Background Information

    +Since the introduction of MS Windows 2000, it is possible to run MS Windows networking without the use of NetBIOS over TCP/IP. NetBIOS over TCP/IP uses UDP port 137 for NetBIOS name resolution and uses TCP port 139 for NetBIOS session services. When NetBIOS over -TCP/IP is disabled on MS Windows 2000 and later clients then only TCP port 445 will be -used and UDP port 137 and TCP port 139 will not. +TCP/IP is disabled on MS Windows 2000 and later clients, then only the TCP port 445 will be +used and the UDP port 137 and TCP port 139 will not.

    Note

    -When using Windows 2000 or later clients, if NetBIOS over TCP/IP is NOT disabled, then +When using Windows 2000 or later clients, if NetBIOS over TCP/IP is not disabled, then the client will use UDP port 137 (NetBIOS Name Service, also known as the Windows Internet -Name Service or WINS), TCP port 139 AND TCP port 445 (for actual file and print traffic). +Name Service or WINS), TCP port 139 and TCP port 445 (for actual file and print traffic).

    -When NetBIOS over TCP/IP is disabled the use of DNS is essential. Most installations that +When NetBIOS over TCP/IP is disabled, the use of DNS is essential. Most installations that disable NetBIOS over TCP/IP today use MS Active Directory Service (ADS). ADS requires - + Dynamic DNS with Service Resource Records (SRV RR) and with Incremental Zone Transfers (IXFR). - + Use of DHCP with ADS is recommended as a further means of maintaining central control -over client workstation network configuration. -

    Name Resolution in a pure UNIX/Linux world

    +over the client workstation network configuration. +

    Name Resolution in a Pure UNIX/Linux World

    The key configuration files covered in this section are: -

    • /etc/hosts

    • /etc/resolv.conf

    • /etc/host.conf

    • /etc/nsswitch.conf

    /etc/hosts

    -Contains a static list of IP addresses and names. -eg: +

    • /etc/hosts

    • /etc/resolv.conf

    • /etc/host.conf

    • /etc/nsswitch.conf

    /etc/hosts

    +This file contains a static list of IP addresses and names.

     127.0.0.1	localhost localhost.localdomain
    -192.168.1.1	bigbox.caldera.com	bigbox	alias4box
    +192.168.1.1	bigbox.quenya.org	bigbox	alias4box
     

    The purpose of /etc/hosts is to provide a -name resolution mechanism so that uses do not need to remember +name resolution mechanism so uses do not need to remember IP addresses.

    Network packets that are sent over the physical network transport layer communicate not via IP addresses but rather using the Media Access Control address, or MAC address. IP addresses are currently 32 bits in length and are typically presented as four (4) decimal -numbers that are separated by a dot (or period). eg: 168.192.1.1. -

    +numbers that are separated by a dot (or period). For example, 168.192.1.1. +

    + MAC Addresses use 48 bits (or 6 bytes) and are typically represented -as two digit hexadecimal numbers separated by colons. eg: -40:8e:0a:12:34:56 -

    -Every network interface must have an MAC address. Associated with -a MAC address there may be one or more IP addresses. There is NO -relationship between an IP address and a MAC address, all such assignments -are arbitrary or discretionary in nature. At the most basic level all -network communications takes place using MAC addressing. Since MAC -addresses must be globally unique, and generally remains fixed for +as two-digit hexadecimal numbers separated by colons: 40:8e:0a:12:34:56. +

    +Every network interface must have a MAC address. Associated with +a MAC address may be one or more IP addresses. There is no +relationship between an IP address and a MAC address; all such assignments +are arbitrary or discretionary in nature. At the most basic level, all +network communications take place using MAC addressing. Since MAC +addresses must be globally unique and generally remain fixed for any particular interface, the assignment of an IP address makes sense from a network management perspective. More than one IP address can -be assigned per MAC address. One address must be the primary IP address, +be assigned per MAC address. One address must be the primary IP +address this is the address that will be returned in the ARP reply.

    -When a user or a process wants to communicate with another machine -the protocol implementation ensures that the "machine name" or "host -name" is resolved to an IP address in a manner that is controlled +When a user or a process wants to communicate with another machine, +the protocol implementation ensures that the “machine name” or “host +name” is resolved to an IP address in a manner that is controlled by the TCP/IP configuration control files. The file /etc/hosts is one such file.

    When the IP address of the destination interface has been -determined a protocol called ARP/RARP is used to identify +determined, a protocol called ARP/RARP is used to identify the MAC address of the target interface. ARP stands for Address -Resolution Protocol, and is a broadcast oriented method that -uses UDP (User Datagram Protocol) to send a request to all -interfaces on the local network segment using the all 1's MAC +Resolution Protocol and is a broadcast-oriented method that +uses User Datagram Protocol (UDP) to send a request to all +interfaces on the local network segment using the all 1s MAC address. Network interfaces are programmed to respond to two MAC addresses only; their own unique address and the address ff:ff:ff:ff:ff:ff. The reply packet from an ARP request will contain the MAC address and the primary IP address for each interface. -

    +

    + The /etc/hosts file is foundational to all UNIX/Linux TCP/IP installations and as a minimum will contain the localhost and local network interface IP addresses and the primary names by which they are known within the local machine. -This file helps to prime the pump so that a basic level of name +This file helps to prime the pump so a basic level of name resolution can exist before any other method of name resolution becomes available. -

    /etc/resolv.conf

    +

    /etc/resolv.conf

    This file tells the name resolution libraries:

    • The name of the domain to which the machine - belongs + belongs.

    • The name(s) of any domains that should be automatically searched when trying to resolve unqualified - host names to their IP address + host names to their IP address.

    • The name or IP address of available Domain - Name Servers that may be asked to perform name to address - translation lookups -

    /etc/host.conf

    + Name Servers that may be asked to perform name-to-address + translation lookups. +

    /etc/host.conf

    + /etc/host.conf is the primary means by -which the setting in /etc/resolv.conf may be affected. It is a -critical configuration file. This file controls the order by +which the setting in /etc/resolv.conf may be effected. It is a +critical configuration file. This file controls the order by which name resolution may proceed. The typical structure is:

     order hosts,bind
     multi on
     

    then both addresses should be returned. Please refer to the -man page for host.conf for further details. -

    /etc/nsswitch.conf

    +man page for host.conf for further details. +

    /etc/nsswitch.conf

    + This file controls the actual name resolution targets. The file typically has resolver object specifications as follows:

    @@ -13814,45 +13786,47 @@ Of course, each of these mechanisms requires that the appropriate
     facilities and/or services are correctly configured.
     

    It should be noted that unless a network request/message must be -sent, TCP/IP networks are silent. All TCP/IP communications assumes a +sent, TCP/IP networks are silent. All TCP/IP communications assume a principal of speaking only when necessary. -

    -Starting with version 2.2.0 samba has Linux support for extensions to -the name service switch infrastructure so that linux clients will +

    + +Starting with version 2.2.0, Samba has Linux support for extensions to +the name service switch infrastructure so Linux clients will be able to obtain resolution of MS Windows NetBIOS names to IP -Addresses. To gain this functionality Samba needs to be compiled -with appropriate arguments to the make command (i.e.: make +Addresses. To gain this functionality, Samba needs to be compiled +with appropriate arguments to the make command (i.e., make nsswitch/libnss_wins.so). The resulting library should then be installed in the /lib directory and -the "wins" parameter needs to be added to the "hosts:" line in -the /etc/nsswitch.conf file. At this point it +the wins parameter needs to be added to the “hosts:” line in +the /etc/nsswitch.conf file. At this point, it will be possible to ping any MS Windows machine by its NetBIOS -machine name, so long as that machine is within the workgroup to -which both the samba machine and the MS Windows machine belong. -

    Name resolution as used within MS Windows networking

    +machine name, as long as that machine is within the workgroup to +which both the Samba machine and the MS Windows machine belong. +

    Name Resolution as Used within MS Windows Networking

    MS Windows networking is predicated about the name each machine is given. This name is known variously (and inconsistently) as -the "computer name", "machine name", "networking name", "netbios name", -or "SMB name". All terms mean the same thing with the exception of -"netbios name" which can apply also to the name of the workgroup or the -domain name. The terms "workgroup" and "domain" are really just a +the “computer name,” “machine name,” “networking name,” “netbios name,” +or “SMB name.” All terms mean the same thing with the exception of +“netbios name” that can also apply to the name of the workgroup or the +domain name. The terms “workgroup” and “domain” are really just a simple name with which the machine is associated. All NetBIOS names -are exactly 16 characters in length. The 16th character is reserved. -It is used to store a one byte value that indicates service level +are exactly 16 characters in length. The 16th character is reserved. +It is used to store a one-byte value that indicates service level information for the NetBIOS name that is registered. A NetBIOS machine -name is therefore registered for each service type that is provided by +name is, therefore, registered for each service type that is provided by the client/server.

    -The following are typical NetBIOS name/service type registrations: -

    Table 26.1. Unique NetBIOS names

    MACHINENAME<00>Server Service is running on MACHINENAME
    MACHINENAME<03>Generic Machine Name (NetBIOS name)
    MACHINENAME<20>LanMan Server service is running on MACHINENAME
    WORKGROUP<1b>Domain Master Browser

    Table 26.2. Group Names

    WORKGROUP<03>Generic Name registered by all members of WORKGROUP
    WORKGROUP<1c>Domain Controllers / Netlogon Servers
    WORKGROUP<1d>Local Master Browsers
    WORKGROUP<1e>Internet Name Resolvers

    - + and list typical NetBIOS name/service type registrations. +

    Table 26.1. Unique NetBIOS Names

    MACHINENAME<00>Server Service is running on MACHINENAME
    MACHINENAME<03>Generic Machine Name (NetBIOS name)
    MACHINENAME<20>LanMan Server service is running on MACHINENAME
    WORKGROUP<1b>Domain Master Browser

    Table 26.2. Group Names

    WORKGROUP<03>Generic Name registered by all members of WORKGROUP
    WORKGROUP<1c>Domain Controllers / Netlogon Servers
    WORKGROUP<1d>Local Master Browsers
    WORKGROUP<1e>Internet Name Resolvers

    + It should be noted that all NetBIOS machines register their own names as per the above. This is in vast contrast to TCP/IP installations where traditionally the system administrator will -determine in the /etc/hosts or in the DNS database what names +determine in the /etc/hosts or in the DNS database what names are associated with each IP address. -

    -One further point of clarification should be noted, the /etc/hosts +

    + +One further point of clarification should be noted. The /etc/hosts file and the DNS records do not provide the NetBIOS name type information that MS Windows clients depend on to locate the type of service that may be needed. An example of this is what happens when an MS Windows client @@ -13861,38 +13835,38 @@ address of a server that provides it by performing a lookup (via a NetBIOS broadcast) for enumeration of all machines that have registered the name type *<1c>. A logon request is then sent to each IP address that is returned in the enumerated list of IP addresses. -Whichever machine first replies then ends up providing the logon services. +Whichever machine first replies, it then ends up providing the logon services.

    -The name "workgroup" or "domain" really can be confusing since these +The name “workgroup” or “domain” really can be confusing since these have the added significance of indicating what is the security -architecture of the MS Windows network. The term "workgroup" indicates +architecture of the MS Windows network. The term “workgroup” indicates that the primary nature of the network environment is that of a -peer-to-peer design. In a WORKGROUP all machines are responsible for -their own security, and generally such security is limited to use of -just a password (known as SHARE MODE security). In most situations -with peer-to-peer networking the users who control their own machines +peer-to-peer design. In a WORKGROUP, all machines are responsible for +their own security, and generally such security is limited to the use of +just a password (known as Share Level security). In most situations +with peer-to-peer networking, the users who control their own machines will simply opt to have no security at all. It is possible to have -USER MODE security in a WORKGROUP environment, thus requiring use +User Level Security in a WORKGROUP environment, thus requiring the use of a user name and a matching password.

    MS Windows networking is thus predetermined to use machine names for all local and remote machine message passing. The protocol used is called Server Message Block (SMB) and this is implemented using the NetBIOS protocol (Network Basic Input Output System). NetBIOS can -be encapsulated using LLC (Logical Link Control) protocol - in which case +be encapsulated using LLC (Logical Link Control) protocol in which case the resulting protocol is called NetBEUI (Network Basic Extended User Interface). NetBIOS can also be run over IPX (Internetworking Packet Exchange) protocol as used by Novell NetWare, and it can be run -over TCP/IP protocols - in which case the resulting protocol is called +over TCP/IP protocols in which case the resulting protocol is called NBT or NetBT, the NetBIOS over TCP/IP.

    MS Windows machines use a complex array of name resolution mechanisms. -Since we are primarily concerned with TCP/IP this demonstration is +Since we are primarily concerned with TCP/IP, this demonstration is limited to this area. -

    The NetBIOS Name Cache

    -All MS Windows machines employ an in memory buffer in which is +

    The NetBIOS Name Cache

    +All MS Windows machines employ an in-memory buffer in which is stored the NetBIOS names and IP addresses for all external -machines that that machine has communicated with over the +machines that machine has communicated with over the past 10-15 minutes. It is more efficient to obtain an IP address for a machine from the local cache than it is to go through all the configured name resolution mechanisms. @@ -13900,21 +13874,23 @@ configured name resolution mechanisms. If a machine whose name is in the local name cache has been shut down before the name had been expired and flushed from the cache, then an attempt to exchange a message with that machine will be subject -to time-out delays. i.e.: Its name is in the cache, so a name resolution -lookup will succeed, but the machine can not respond. This can be -frustrating for users - but it is a characteristic of the protocol. -

    +to time-out delays. Its name is in the cache, so a name resolution +lookup will succeed, but the machine cannot respond. This can be +frustrating for users but is a characteristic of the protocol. +

    + + The MS Windows utility that allows examination of the NetBIOS -name cache is called "nbtstat". The Samba equivalent of this +name cache is called “nbtstat”. The Samba equivalent of this is called nmblookup. -

    The LMHOSTS file

    -This file is usually located in MS Windows NT 4.0 or -2000 in C:\WINNT\SYSTEM32\DRIVERS\ETC and contains -the IP Address and the machine name in matched pairs. The -LMHOSTS file performs NetBIOS name -to IP address mapping. -

    -It typically looks like: +

    The LMHOSTS File

    + +This file is usually located in MS Windows NT 4.0 or Windows 200x/XP in the directory +C:\WINNT\SYSTEM32\DRIVERS\ETC and contains the IP Address +and the machine name in matched pairs. The LMHOSTS file +performs NetBIOS name to IP address mapping. +

    +It typically looks like this:

     # Copyright (c) 1998 Microsoft Corp.
     #
    @@ -13922,7 +13898,7 @@ It typically looks like:
     # over TCP/IP) stack for Windows98
     #
     # This file contains the mappings of IP addresses to NT computernames
    -# (NetBIOS) names.  Each entry should be kept on an individual line.
    +# (NetBIOS) names. Each entry should be kept on an individual line.
     # The IP address should be placed in the first column followed by the
     # corresponding computername. The address and the computername
     # should be separated by at least one space or tab. The "#" character
    @@ -13944,7 +13920,7 @@ It typically looks like:
     # not preloaded, but are parsed only after dynamic name resolution fails.
     #
     # Following an entry with the "#DOM:<domain>" tag will associate the
    -# entry with the domain specified by <domain>. This affects how the
    +# entry with the domain specified by <domain>. This effects how the
     # browser and logon services behave in TCP/IP environments. To preload
     # the host name associated with #DOM entry, it is necessary to also add a
     # #PRE to the line. The <domain> is always preloaded although it will not
    @@ -13973,10 +13949,10 @@ It typically looks like:
     #
     # The following example illustrates all of these extensions:
     #
    -# 102.54.94.97     rhino         #PRE #DOM:networking  #net group's DC
    -# 102.54.94.102    "appname  \0x14"                    #special app server
    -# 102.54.94.123    popular            #PRE             #source server
    -# 102.54.94.117    localsrv           #PRE             #needed for the include
    +# 102.54.94.97     rhino     #PRE #DOM:networking  #net group's DC
    +# 102.54.94.102    "appname  \0x14"       #special app server
    +# 102.54.94.123    popular   #PRE         #source server
    +# 102.54.94.117    localsrv  #PRE         #needed for the include
     #
     # #BEGIN_ALTERNATE
     # #INCLUDE \\localsrv\public\lmhosts
    @@ -13993,17 +13969,18 @@ It typically looks like:
     # so keeping the number of comments to a minimum will improve performance.
     # Therefore it is not advisable to simply add lmhosts file entries onto the
     # end of this file.
    -

    HOSTS file

    -This file is usually located in MS Windows NT 4.0 or 2000 in -C:\WINNT\SYSTEM32\DRIVERS\ETC and contains +

    HOSTS File

    +This file is usually located in MS Windows NT 4.0 or Windows 200x/XP in +the directory C:\WINNT\SYSTEM32\DRIVERS\ETC and contains the IP Address and the IP hostname in matched pairs. It can be used by the name resolution infrastructure in MS Windows, depending on how the TCP/IP environment is configured. This file is in every way the equivalent of the UNIX/Linux /etc/hosts file. -

    DNS Lookup

    +

    DNS Lookup

    + This capability is configured in the TCP/IP setup area in the network configuration facility. If enabled, an elaborate name resolution sequence -is followed the precise nature of which is dependant on how the NetBIOS +is followed, the precise nature of which is dependant on how the NetBIOS Node Type parameter is configured. A Node Type of 0 means that NetBIOS broadcast (over UDP broadcast) is used if the name that is the subject of a name lookup is not found in the NetBIOS name @@ -14011,46 +13988,48 @@ cache. If that fails then DNS, HOSTS and LMHOSTS are checked. If set to Node Type 8, then a NetBIOS Unicast (over UDP Unicast) is sent to the WINS Server to obtain a lookup before DNS, HOSTS, LMHOSTS, or broadcast lookup is used. -

    WINS Lookup

    +

    WINS Lookup

    + A WINS (Windows Internet Name Server) service is the equivalent of the rfc1001/1002 specified NBNS (NetBIOS Name Server). A WINS server stores the names and IP addresses that are registered by a Windows client if the TCP/IP setup has been given at least one WINS Server IP Address.

    -To configure Samba to be a WINS server the following parameter needs +To configure Samba to be a WINS server, the following parameter needs to be added to the smb.conf file:

    wins support = Yes

    -To configure Samba to use a WINS server the following parameters are +To configure Samba to use a WINS server, the following parameters are needed in the smb.conf file:

    wins support = No
    wins server = xxx.xxx.xxx.xxx

    where xxx.xxx.xxx.xxx is the IP address of the WINS server.

    For information about setting up Samba as a WINS server, read - the chapter on network browsing.

    Common Errors

    +.

    Common Errors

    TCP/IP network configuration problems find every network administrator sooner or later. The cause can be anything from keyboard mishaps, forgetfulness, simple mistakes, and -carelessness. Of course, no one is every deliberately careless! -

    Pinging works only in one way

    - “I can ping my samba server from Windows, but I can - not ping my Windows machine from the samba server.” +carelessness. Of course, no one is ever deliberately careless! +

    Pinging Works Only in One Way

    + “I can ping my Samba server from Windows, but I cannot ping my Windows + machine from the Samba server.

    - The Windows machine was at IP Address 192.168.1.2 with netmask 255.255.255.0, the + Answer: The Windows machine was at IP Address 192.168.1.2 with netmask 255.255.255.0, the Samba server (Linux) was at IP Address 192.168.1.130 with netmask 255.255.255.128. The machines were on a local network with no external connections.

    Due to inconsistent netmasks, the Windows machine was on network 192.168.1.0/24, while - the Samba server was on network 192.168.1.128/25 - logically a different network. -

    Very Slow Network Connections

    - A common causes of slow network response includes: -

    • Client is configured to use DNS and DNS server is down

    • Client is configured to use remote DNS server, but remote connection is down

    • Client is configured to use a WINS server, but there is no WINS server

    • Client is NOT configured to use a WINS server, but there is a WINS server

    • Firewall is filtering our DNS or WINS traffic

    Samba server name change problem

    - “The name of the samba server was changed, samba was restarted, samba server can not be + the Samba server was on network 192.168.1.128/25 logically a different network. +

    Very Slow Network Connections

    + A common cause of slow network response includes: +

    • Client is configured to use DNS and the DNS server is down.

    • Client is configured to use remote DNS server, but the + remote connection is down.

    • Client is configured to use a WINS server, but there is no WINS server.

    • Client is not configured to use a WINS server, but there is a WINS server.

    • Firewall is filtering our DNS or WINS traffic.

    Samba Server Name Change Problem

    + “The name of the Samba server was changed, Samba was restarted, Samba server cannot be pinged by new name from MS Windows NT4 Workstation, but it does still respond to ping using the old name. Why?

    - From this description three (3) things are rather obvious: -

    • WINS is NOT in use, only broadcast based name resolution is used

    • The samba server was renamed and restarted within the last 10-15 minutes

    • The old samba server name is still in the NetBIOS name cache on the MS Windows NT4 Workstation

    + From this description, three things are obvious: +

    • WINS is not in use, only broadcast-based name resolution is used.

    • The Samba server was renamed and restarted within the last 10-15 minutes.

    • The old Samba server name is still in the NetBIOS name cache on the MS Windows NT4 Workstation.

    To find what names are present in the NetBIOS name cache on the MS Windows NT4 machine, - open a cmd shell, then: + open a cmd shell and then:

     C:\> nbtstat -n
    @@ -14079,10 +14058,10 @@ GANDALF	<20>  UNIQUE      192.168.1.1          240
     

    In the above example, GANDALF is the Samba server and FRODO is the MS Windows NT4 Workstation. - The first listing shows the contents of the Local Name Table (i.e.: Identity information on - the MS Windows workstation), the second shows the NetBIOS name in the NetBIOS name cache. + The first listing shows the contents of the Local Name Table (i.e., Identity information on + the MS Windows workstation) and the second shows the NetBIOS name in the NetBIOS name cache. The name cache contains the remote machines known to this workstation. -

    Chapter 27. Unicode/Charsets

    Jelmer R. Vernooij

    The Samba Team

    TAKAHASHI Motonobu

    25 March 2003

    Features and Benefits

    +

    Chapter 27. Unicode/Charsets

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    TAKAHASHI Motonobu

    25 March 2003

    Features and Benefits

    Every industry eventually matures. One of the great areas of maturation is in the focus that has been given over the past decade to make it possible for anyone anywhere to use a computer. It has not always been that way, in fact, not so long @@ -14090,325 +14069,352 @@ ago it was common for software to be written for exclusive use in the country of origin.

    Of all the effort that has been brought to bear on providing native language support -for all computer users, the efforts of the Openi18n organisation is deserving of +for all computer users, the efforts of the Openi18n organization is deserving of special mention.

    Samba-2.x supported a single locale through a mechanism called codepages. Samba-3 is destined to become a truly trans-global -file and printer sharing platform. -

    What are charsets and unicode?

    +file and printer-sharing platform. +

    What Are Charsets and Unicode?

    Computers communicate in numbers. In texts, each number will be translated to a corresponding letter. The meaning that will be assigned -to a certain number depends on the character set(charset) +to a certain number depends on the character set (charset) that is used. +

    A charset can be seen as a table that is used to translate numbers to letters. Not all computers use the same charset (there are charsets -with German umlauts, Japanese characters, etc). Usually a charset contains +with German umlauts, Japanese characters, and so on). Usually a charset contains 256 characters, which means that storing a character with it takes exactly one byte.

    There are also charsets that support even more characters, -but those need twice(or even more) as much storage space. These +but those need twice as much storage space (or more). These charsets can contain 256 * 256 = 65536 characters, which -is more then all possible characters one could think of. They are called -multibyte charsets (because they use more then one byte to -store one character). +is more than all possible characters one could think of. They are called +multibyte charsets because they use more then one byte to +store one character.

    - A standardised multibyte charset is unicode. +A standardized multibyte charset is unicode. A big advantage of using a multibyte charset is that you only need one; there is no need to make sure two computers use the same charset when they are communicating. -

    Old windows clients use single-byte charsets, named -'codepages' by Microsoft. However, there is no support for -negotiating the charset to be used in the smb protocol. Thus, you +

    Old Windows clients use single-byte charsets, named +codepages, by Microsoft. However, there is no support for +negotiating the charset to be used in the SMB/CIFS protocol. Thus, you have to make sure you are using the same charset when talking to an older client. -Newer clients (Windows NT, 2K, XP) talk unicode over the wire. -

    Samba and charsets

    -As of samba 3.0, samba can (and will) talk unicode over the wire. Internally, -samba knows of three kinds of character sets: -

    unix charset

    +Newer clients (Windows NT, 200x, XP) talk unicode over the wire. +

    Samba and Charsets

    +As of Samba-3.0, Samba can (and will) talk unicode over the wire. Internally, +Samba knows of three kinds of character sets: +

    unix charset

    This is the charset used internally by your operating system. The default is UTF-8, which is fine for most - systems. The default in previous samba releases was ASCII. -

    display charset

    This is the charset samba will use to print messages - on your screen. It should generally be the same as the unix charset. -

    dos charset

    This is the charset samba uses when communicating with - DOS and Windows 9x clients. It will talk unicode to all newer clients. + systems, which covers all characters in all languages. The default in previous Samba releases was ASCII. +

    display charset

    This is the charset Samba will use to print messages + on your screen. It should generally be the same as the unix charset. +

    dos charset

    This is the charset Samba uses when communicating with + DOS and Windows 9x/Me clients. It will talk unicode to all newer clients. The default depends on the charsets you have installed on your system. Run testparm -v | grep "dos charset" to see what the default is on your system. -

    Conversion from old names

    Because previous samba versions did not do any charset conversion, -characters in filenames are usually not correct in the unix charset but only -for the local charset used by the DOS/Windows clients.

    Bjoern Jacke has written a utility named convm that can convert whole directory - structures to different charsets with one single command. -

    Japanese charsets

    Samba doesn't work correctly with Japanese charsets yet. Here are -points of attention when setting it up:

    • You should set mangling method = hash

    • There are various iconv() implementations around and not -all of them work equally well. glibc2's iconv() has a critical problem -in CP932. libiconv-1.8 works with CP932 but still has some problems and -does not work with EUC-JP.

    • You should set dos charset = CP932, not -Shift_JIS, SJIS...

    • Currently only unix charset = CP932 -will work (but still has some problems...) because of iconv() issues. -unix charset = EUC-JP doesn't work well because of -iconv() issues.

    • Currently Samba 3.0 does not support unix charset = UTF8-MAC/CAP/HEX/JIS*

    More information (in Japanese) is available at: http://www.atmarkit.co.jp/flinux/special/samba3/samba3a.html.

    Common errors

    CP850.so can't be found

    Samba is complaining about a missing CP850.so file”.

    CP850 is the default dos charset. The dos charset is used to convert data to the codepage used by your dos clients. If you don't have any dos clients, you can safely ignore this message.

    CP850 should be supported by your local iconv implementation. Make sure you have all the required packages installed. If you compiled samba from source, make sure configure found iconv.

    Chapter 28. Samba Backup Techniques

    John H. Terpstra

    Samba Team

    Table of Contents

    Note
    Features and Benefits

    Note

    +

    Conversion from Old Names

    Because previous Samba versions did not do any charset conversion, +characters in filenames are usually not correct in the UNIX charset but only +for the local charset used by the DOS/Windows clients.

    Japanese Charsets

    Samba does not work correctly with Japanese charsets yet. Here are +points of attention when setting it up:

    • You should set mangling method = hash

    • There are various iconv() implementations around and not + all of them work equally well. glibc2's iconv() has a critical problem + in CP932. libiconv-1.8 works with CP932 but still has some problems and + does not work with EUC-JP.

    • You should set dos charset = CP932, not + Shift_JIS, SJIS.

    • Currently only UNIX charset = CP932 + will work (but still has some problems...) because of iconv() issues. + UNIX charset = EUC-JP does not work well because of + iconv() issues.

    • Currently Samba-3.0 does not support UNIX charset = UTF8-MAC/CAP/HEX/JIS*.

    More information (in Japanese) is available at: http://www.atmarkit.co.jp/flinux/special/samba3/samba3a.html.

    Common Errors

    CP850.so Can't Be Found

    Samba is complaining about a missing CP850.so file.

    Answer: CP850 is the default dos charset. + The dos charset is used to convert data to the codepage used by your dos clients. + If you do not have any dos clients, you can safely ignore this message.

    CP850 should be supported by your local iconv implementation. Make sure you have all the required packages installed. + If you compiled Samba from source, make sure to configure found iconv.

    Chapter 28. Samba Backup Techniques

    John H. Terpstra

    Samba Team

    Table of Contents

    Note
    Features and Benefits

    Note

    This chapter did not make it into this release. It is planned for the published release of this document. -

    Features and Benefits

    +

    Features and Benefits

    We need feedback from people who are backing up samba servers. We would like to know what software tools you are using to backup your samba server/s.

    In particular, if you have any success and / or failure stories you could share with other users this would be appreciated. -

    Chapter 29. High Availability Options

    John H. Terpstra

    Samba Team

    Table of Contents

    Note

    Note

    +

    Chapter 29. High Availability Options

    John H. Terpstra

    Samba Team

    Table of Contents

    Note

    Note

    This chapter did not make it into this release. It is planned for the published release of this document. -

    Migration and Updating

    Chapter 30. Upgrading from Samba-2.x to Samba-3.0.0

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Gerald (Jerry) Carter

    Samba Team

    June 30, 2003

    +This chapter deals exclusively with the differences between Samba-3.0.0 and Samba-2.2.8a. +It points out where configuration parameters have changed, and provides a simple guide for +the move from 2.2.x to 3.0.0. +

    Quick Migration Guide

    +Samba-3.0.0 default behavior should be approximately the same as Samba-2.2.x. +The default behavior when the new parameter passdb backend +is not defined in the smb.conf file provides the same default behviour as Samba-2.2.x +with encrypt passwords = Yes, and +will use the smbpasswd database. +

    +So why say that behavior should be approximately the same as Samba-2.2.x? Because +Samba-3.0.0 can negotiate new protocols, such as support for native Unicode, that may result in +differing protocol code paths being taken. The new behavior under such circumstances is not +exactly the same as the old one. The good news is that the domain and machine SIDs will be +preserved across the upgrade. +

    +If the Samba-2.2.x system was using an LDAP backend, and there is no time to update the LDAP +database, then make sure that passdb backend = ldapsam_compat +is specified in the smb.conf file. For the rest, behavior should remain more or less the same. +At a later date, when there is time to implement a new Samba-3 compatible LDAP backend, it is possible +to migrate the old LDAP database to the new one through use of the pdbedit. +See . +

    New Features in Samba-3

    +The major new features are:

    1. - Active Directory support. This release is able to join a ADS realm + Active Directory support. This release is able to join an ADS realm as a member server and authenticate users using LDAP/kerberos.

    2. - Unicode support. Samba will now negotiate UNICODE on the wire and - internally there is now a much better infrastructure for multi-byte - and UNICODE character sets. + Unicode support. Samba will now negotiate unicode on the wire and + internally there is a much better infrastructure for multi-byte + and unicode character sets.

    3. New authentication system. The internal authentication system has been almost completely rewritten. Most of the changes are internal, - but the new auth system is also very configurable. + but the new authoring system is also very configurable.

    4. New filename mangling system. The filename mangling system has been completely rewritten. An internal database now stores mangling maps - persistently. This needs lots of testing. + persistently.

    5. - New "net" command. A new "net" command has been added. It is - somewhat similar to the "net" command in windows. Eventually we + New “net” command. A new “net” command has been added. It is + somewhat similar to the “net” command in Windows. Eventually, we plan to replace a bunch of other utilities (such as smbpasswd) - with subcommands in "net", at the moment only a few things are - implemented. + with subcommands in “net”.

    6. Samba now negotiates NT-style status32 codes on the wire. This - improves error handling a lot. + considerably improves error handling.

    7. - Better Windows 2000/XP/2003 printing support including publishing - printer attributes in active directory + Better Windows 200x/XP printing support including publishing + printer attributes in Active Directory.

    8. - New loadable RPC modules + New loadable RPC modules for passdb backends and character sets.

    9. - New dual-daemon winbindd support (-B) for better performance + New default dual-daemon winbindd support for better performance.

    10. Support for migrating from a Windows NT 4.0 domain to a Samba - domain and maintaining user, group and domain SIDs + domain and maintaining user, group and domain SIDs.

    11. Support for establishing trust relationships with Windows NT 4.0 - domain controllers + Domain Controllers.

    12. Initial support for a distributed Winbind architecture using - an LDAP directory for storing SID to uid/gid mappings + an LDAP directory for storing SID to UID/GID mappings.

    13. Major updates to the Samba documentation tree. +

    14. + Full support for client and server SMB signing to ensure + compatibility with default Windows 2003 security settings.

    Plus lots of other improvements! -

    Configuration Parameter Changes

    -This section contains a brief listing of changes to smb.conf options -in the 3.0.0 release. Please refer to the smb.conf(5) man page for +

    Configuration Parameter Changes

    +This section contains a brief listing of changes to smb.conf options +in the 3.0.0 release. Please refer to the smb.conf(5) man page for complete descriptions of new or modified parameters. -

    Removed Parameters

    (order alphabetically):

    • admin log

    • alternate permissions

    • character set

    • client codepage

    • code page directory

    • coding system

    • domain admin group

    • domain guest group

    • force unknown acl user

    • nt smb support

    • post script

    • printer driver

    • printer driver file

    • printer driver location

    • status

    • total print jobs

    • use rhosts

    • valid chars

    • vfs options

    New Parameters

    (new parameters have been grouped by function):

    Remote management

    • abort shutdown script

    • shutdown script

    User and Group Account Management

    • add group script

    • add machine script

    • add user to group script

    • algorithmic rid base

    • delete group script

    • delete user from group script

    • passdb backend

    • set primary group script

    Authentication

    • auth methods

    • ads server

    • realm

    Protocol Options

    • client lanman auth

    • client NTLMv2 auth

    • client schannel

    • client signing

    • client use spnego

    • disable netbios

    • ntlm auth

    • paranoid server security

    • server schannel

    • smb ports

    • use spnego

    File Service

    • get quota command

    • hide special files

    • hide unwriteable files

    • hostname lookups

    • kernel change notify

    • mangle prefix

    • msdfs proxy

    • set quota command

    • use sendfile

    • vfs objects

    Printing

    • max reported print jobs

    UNICODE and Character Sets

    • display charset

    • dos charset

    • unicode

    • unix charset

    SID to uid/gid Mappings

    • idmap backend

    • idmap gid

    • idmap only

    • idmap uid

    LDAP

    • ldap delete dn

    • ldap group suffix

    • ldap idmap suffix

    • ldap machine suffix

    • ldap passwd sync

    • ldap trust ids

    • ldap user suffix

    General Configuration

    • preload modules

    • privatedir

    Modified Parameters (changes in behavior):

    • encrypt passwords (enabled by default)

    • mangling method (set to 'hash2' by default)

    • passwd chat

    • passwd program

    • restrict anonymous (integer value)

    • security (new 'ads' value)

    • strict locking (enabled by default)

    • winbind cache time (increased to 5 minutes)

    • winbind uid (deprecated in favor of 'idmap uid')

    • winbind gid (deprecated in favor of 'idmap gid')

    New Functionality

    Databases

    +

    Removed Parameters

    (Ordered Alphabetically):

    • admin log

    • alternate permissions

    • character set

    • client codepage

    • code page directory

    • coding system

    • domain admin group

    • domain guest group

    • force unknown acl user

    • nt smb support

    • post script

    • printer driver

    • printer driver file

    • printer driver location

    • status

    • stip dot

    • total print jobs

    • use rhosts

    • valid chars

    • vfs options

    New Parameters

    (New parameters have been grouped by function):

    Remote Management

    • abort shutdown script

    • shutdown script

    User and Group Account Management:

    • add group script

    • add machine script

    • add user to group script

    • algorithmic rid base

    • delete group script

    • delete user from group script

    • passdb backend

    • set primary group script

    Authentication:

    • auth methods

    • realm

    Protocol Options:

    • client lanman auth

    • client NTLMv2 auth

    • client schannel

    • client signing

    • client use spnego

    • disable netbios

    • ntlm auth

    • paranoid server security

    • server schannel

    • server signing

    • smb ports

    • use spnego

    File Service:

    • get quota command

    • hide special files

    • hide unwriteable files

    • hostname lookups

    • kernel change notify

    • mangle prefix

    • map acl inherit

    • msdfs proxy

    • set quota command

    • use sendfile

    • vfs objects

    Printing:

    • max reported print jobs

    Unicode and Character Sets:

    • display charset

    • dos charset

    • unicode

    • UNIX charset

    SID to UID/GID Mappings:

    • idmap backend

    • idmap gid

    • idmap uid

    • winbind enable local accounts

    • winbind trusted domains only

    • template primary group

    • enable rid algorithm

    LDAP:

    • ldap delete dn

    • ldap group suffix

    • ldap idmap suffix

    • ldap machine suffix

    • ldap passwd sync

    • ldap trust ids

    • ldap user suffix

    General Configuration:

    • preload modules

    • privatedir

    Modified Parameters (Changes in Behavior):

    • encrypt passwords (enabled by default)

    • mangling method (set to hash2 by default)

    • passwd chat

    • passwd program

    • password server

    • restrict anonymous (integer value)

    • security (new ads value)

    • strict locking (enabled by default)

    • winbind cache time (increased to 5 minutes)

    • winbind uid (deprecated in favor of idmap uid)

    • winbind gid (deprecated in favor of idmap gid)

    New Functionality

    Databases

    This section contains brief descriptions of any new databases - introduced in Samba 3.0. Please remember to backup your existing - ${lock directory}/*tdb before upgrading to Samba 3.0. Samba will + introduced in Samba-3. Please remember to backup your existing + ${lock directory}/*tdb before upgrading to Samba-3. Samba will upgrade databases as they are opened (if necessary), but downgrading from 3.0 to 2.2 is an unsupported path. -

    Table 30.1. TDB File Descriptions

    NameDescriptionBackup?
    account_policyUser policy settingsyes
    gencacheGeneric caching dbno
    group_mapping

    Mapping table from Windows groups/SID to unix groups

    yes
    idmap

    new ID map table from SIDS to UNIX uids/gids

    yes
    namecacheName resolution cache entriesno
    netlogon_unigrp

    Cache of universal group membership obtained when operating - as a member of a Windows domain

    no
    printing/*.tdb

    Cached output from 'lpq command' created on a per print - service basis

    no
    registry

    Read-only samba registry skeleton that provides support for - exporting various db tables via the winreg RPCs

    no

    Changes in Behavior

    - The following issues are known changes in behavior between Samba 2.2 and - Samba 3.0 that may affect certain installations of Samba. +

    + The new tdb files are described in . +

    Table 30.1. TDB File Descriptions

    NameDescriptionBackup?
    account_policyUser policy settingsyes
    gencacheGeneric caching dbno
    group_mapping

    Mapping table from Windows groups/SID to UNIX groups

    yes
    idmap

    new ID map table from SIDS to UNIX UIDs/GIDs

    yes
    namecacheName resolution cache entriesno
    netlogon_unigrp

    Cache of universal group membership obtained when operating + as a member of a Windows domain

    no
    printing/*.tdb

    Cached output from `lpq command' created on a per print + service basis

    no
    registry

    Read-only Samba registry skeleton that provides support for + exporting various db tables via the winreg RPCs

    no

    Changes in Behavior

    + The following issues are known changes in behavior between Samba-2.2 and + Samba-3 that may affect certain installations of Samba.

    1. - When operating as a member of a Windows domain, Samba 2.2 would - map any users authenticated by the remote DC to the 'guest account' - if a uid could not be obtained via the getpwnam() call. Samba 3.0 - rejects the connection as NT_STATUS_LOGON_FAILURE. There is no - current work around to re-establish the 2.2 behavior. + When operating as a member of a Windows domain, Samba-2.2 would + map any users authenticated by the remote DC to the “guest account” + if a uid could not be obtained via the getpwnam() call. Samba-3 + rejects the connection as NT_STATUS_LOGON_FAILURE. There is no + current work around to re-establish the Samba-2.2 behavior.

    2. - When adding machines to a Samba 2.2 controlled domain, the - 'add user script' was used to create the UNIX identity of the - machine trust account. Samba 3.0 introduces a new 'add machine - script' that must be specified for this purpose. Samba 3.0 will - not fall back to using the 'add user script' in the absence of - an 'add machine script' -

    Charsets

    + When adding machines to a Samba-2.2 controlled domain, the + “add user script” was used to create the UNIX identity of the + Machine Trust Account. Samba-3 introduces a new “add machine + script” that must be specified for this purpose. Samba-3 will + not fall back to using the “add user script” in the absence of + an “add machine script”. +

    Charsets

    You might experience problems with special characters when communicating with old DOS - clients. Codepage support has changed in samba 3.0. Read the chapter - Unicode support for details. -

    Passdb Backends and Authentication

    + clients. Codepage support has changed in Samba-3. Read , for details. +

    Passdb Backends and Authentication

    There have been a few new changes that Samba administrators should be - aware of when moving to Samba 3.0. + aware of when moving to Samba-3.

    1. Encrypted passwords have been enabled by default in order to - inter-operate better with out-of-the-box Windows client - installations. This does mean that either (a) a samba account - must be created for each user, or (b) 'encrypt passwords = no' - must be explicitly defined in smb.conf. + interoperate better with out-of-the-box Windows client + installations. This does mean that either (a) a Samba account + must be created for each user, or (b) “encrypt passwords = no” + must be explicitly defined in smb.conf.

    2. - Inclusion of new security = ads option for integration - with an Active Directory domain using the native Windows - Kerberos 5 and LDAP protocols. + Inclusion of new security = ads option for integration + with an Active Directory domain using the native Windows Kerberos 5 and LDAP protocols.

    - Samba 3.0 also includes the possibility of setting up chains + Samba-3 also includes the possibility of setting up chains of authentication methods - (auth methods) and account + (auth methods) and account storage backends - (passdb backend). + (passdb backend). Please refer to the smb.conf - man page and the chapter about account information databases for details. While both parameters assume sane default + man page and , for details. While both parameters assume sane default values, it is likely that you will need to understand what the values actually mean in order to ensure Samba operates correctly.

    - Certain functions of the smbpasswd(8) tool have been split between the - new smbpasswd(8) utility, the net(8) tool, and the new pdbedit(8) - utility. See the respective man pages for details. -

    Charsets

    - You might experience problems with special characters when communicating with old DOS - clients. Codepage support has changed in samba 3.0. Read the chapter - Unicode support for details. -

    LDAP

    - This section outlines the new features affecting Samba / LDAP integration. -

    New Schema

    + + Certain functions of the smbpasswd tool have been split between the + new smbpasswd utility, the net tool and the new pdbedit + utility. See the respective man pages for details. +

    LDAP

    + This section outlines the new features effecting Samba/LDAP integration. +

    New Schema

    A new object class (sambaSamAccount) has been introduced to replace - the old sambaAccount. This change aids us in the renaming of attributes - to prevent clashes with attributes from other vendors. There is a - conversion script (examples/LDAP/convertSambaAccount) to modify and LDIF + the old sambaAccount. This change aids us in the renaming of attributes + to prevent clashes with attributes from other vendors. There is a + conversion script (examples/LDAP/convertSambaAccount) to modify an LDIF file to the new schema.

    - Example: + Example:

     		$ ldapsearch .... -b "ou=people,dc=..." > old.ldif
     		$ convertSambaAccount <DOM SID> old.ldif new.ldif
     		

    - The <DOM SID> can be obtained by running 'net getlocalsid <DOMAINNAME> + The <DOM SID> can be obtained by running +

    +$ net getlocalsid <DOMAINNAME>
    +

    on the Samba PDC as root.

    The old sambaAccount schema may still be used by specifying the - "ldapsam_compat" passdb backend. However, the sambaAccount and + ldapsam_compat passdb backend. However, the sambaAccount and associated attributes have been moved to the historical section of the schema file and must be uncommented before use if needed. - The 2.2 object class declaration for a sambaAccount has not changed - in the 3.0 samba.schema file. + The Samba-2.2 object class declaration for a sambaAccount has not changed + in the Samba-3 samba.schema file.

    Other new object classes and their uses include:

    • - sambaDomain - domain information used to allocate rids - for users and groups as necessary. The attributes are added - in 'ldap suffix' directory entry automatically if - an idmap uid/gid range has been set and the 'ldapsam' + sambaDomain domain information used to allocate RIDs + for users and groups as necessary. The attributes are added + in “ldap suffix” directory entry automatically if + an idmap UID/GID range has been set and the “ldapsam” passdb backend has been selected.

    • - sambaGroupMapping - an object representing the + sambaGroupMapping an object representing the relationship between a posixGroup and a Windows - group/SID. These entries are stored in the 'ldap - group suffix' and managed by the 'net groupmap' command. + group/SID. These entries are stored in the “ldap + group suffix” and managed by the “net groupmap” command.

    • - sambaUnixIdPool - created in the 'ldap idmap suffix' entry - automatically and contains the next available 'idmap uid' and - 'idmap gid' + sambaUNIXIdPool created in the “ldap idmap suffix” entry + automatically and contains the next available “idmap UID” and + “idmap GID”.

    • - sambaIdmapEntry - object storing a mapping between a - SID and a UNIX uid/gid. These objects are created by the + sambaIdmapEntry object storing a mapping between a + SID and a UNIX UID/GID. These objects are created by the idmap_ldap module as needed. -

    New Suffix for Searching

    +

    New Suffix for Searching

    The following new smb.conf parameters have been added to aid in directing - certain LDAP queries when 'passdb backend = ldapsam://...' has been + certain LDAP queries when passdb backend = ldapsam://... has been specified. -

    • ldap suffix - used to search for user and computer accounts

    • ldap user suffix - used to store user accounts

    • ldap machine suffix - used to store machine trust accounts

    • ldap group suffix - location of posixGroup/sambaGroupMapping entries

    • ldap idmap suffix - location of sambaIdmapEntry objects

    - If an 'ldap suffix' is defined, it will be appended to all of the - remaining sub-suffix parameters. In this case, the order of the suffix - listings in smb.conf is important. Always place the 'ldap suffix' first +

    • ldap suffix used to search for user and computer accounts.

    • ldap user suffix used to store user accounts.

    • ldap machine suffix used to store Machine Trust Accounts.

    • ldap group suffix location of posixGroup/sambaGroupMapping entries.

    • ldap idmap suffix location of sambaIdmapEntry objects.

    + If an ldap suffix is defined, it will be appended to all of the + remaining sub-suffix parameters. In this case, the order of the suffix + listings in smb.conf is important. Always place the ldap suffix first in the list.

    - Due to a limitation in Samba's smb.conf parsing, you should not surround - the DN's with quotation marks. -

    IdMap LDAP support

    - Samba 3.0 supports an ldap backend for the idmap subsystem. The - following options would inform Samba that the idmap table should be - stored on the directory server onterose in the "ou=idmap,dc=plainjoe, - dc=org" partition. -

    [global]
    ...
    idmap backend = ldap:ldap://onterose/
    ldap idmap suffix = ou=idmap,dc=plainjoe,dc=org
    idmap uid = 40000-50000
    idmap gid = 40000-50000

    - This configuration allows winbind installations on multiple servers to - share a uid/gid number space, thus avoiding the interoperability problems - with NFS that were present in Samba 2.2. -

    Chapter 31. Migration from NT4 PDC to Samba-3 PDC

    John H. Terpstra

    Samba Team

    April 3, 2003

    -This is a rough guide to assist those wishing to migrate from NT4 domain control to -Samba-3 based domain control. -

    Planning and Getting Started

    + Due to a limitation in Samba's smb.conf parsing, you should not surround + the DNs with quotation marks. +

    IdMap LDAP Support

    + Samba-3 supports an ldap backend for the idmap subsystem. The + following options inform Samba that the idmap table should be + stored on the directory server onterose in the "ou=idmap,dc=quenya,dc=org" partition. +

    [global]
    ...
    idmap backend = ldap:ldap://onterose/
    ldap idmap suffix = ou=idmap,dc=quenya,dc=org
    idmap uid = 40000-50000
    idmap gid = 40000-50000

    + This configuration allows Winbind installations on multiple servers to + share a UID/GID number space, thus avoiding the interoperability problems + with NFS that were present in Samba-2.2. +

    Chapter 31. Migration from NT4 PDC to Samba-3 PDC

    John H. Terpstra

    Samba Team

    April 3, 2003

    +This is a rough guide to assist those wishing to migrate from NT4 Domain Control to +Samba-3-based Domain Control. +

    Planning and Getting Started

    In the IT world there is often a saying that all problems are encountered because of poor planning. The corollary to this saying is that not all problems can be anticipated -and planned for. Then again, good planning will anticipate most show stopper type situations. +and planned for. Then again, good planning will anticipate most show-stopper-type situations.

    -Those wishing to migrate from MS Windows NT4 domain control to a Samba-3 domain control +Those wishing to migrate from MS Windows NT4 Domain Control to a Samba-3 Domain Control environment would do well to develop a detailed migration plan. So here are a few pointers to help migration get under way. -

    Objectives

    -The key objective for most organisations will be to make the migration from MS Windows NT4 -to Samba-3 domain control as painless as possible. One of the challenges you may experience +

    Objectives

    +The key objective for most organizations will be to make the migration from MS Windows NT4 +to Samba-3 Domain Control as painless as possible. One of the challenges you may experience in your migration process may well be one of convincing management that the new environment should remain in place. Many who have introduced open source technologies have experienced -pressure to return to a Microsoft based platform solution at the first sign of trouble. -

    -Before attempting a migration to a Samba-3 controlled network make every possible effort to -gain all-round commitment to the change. Know precisely why the change -is important for the organisation. Possible motivations to make a change include: -

    • Improve network manageability

    • Obtain better user level functionality

    • Reduce network operating costs

    • Reduce exposure caused by Microsoft withdrawal of NT4 support

    • Avoid MS License 6 implications

    • Reduce organisation's dependency on Microsoft

    -Make sure that everyone knows that Samba-3 is NOT MS Windows NT4. Samba-3 offers -an alternative solution that is both different from MS Windows NT4 and that offers +pressure to return to a Microsoft-based platform solution at the first sign of trouble. +

    +Before attempting a migration to a Samba-3 controlled network, make every possible effort to +gain all-round commitment to the change. Know precisely why the change +is important for the organization. Possible motivations to make a change include: +

    • Improve network manageability.

    • Obtain better user level functionality.

    • Reduce network operating costs.

    • Reduce exposure caused by Microsoft withdrawal of NT4 support.

    • Avoid MS License 6 implications.

    • Reduce organization's dependency on Microsoft.

    +Make sure everyone knows that Samba-3 is not MS Windows NT4. Samba-3 offers +an alternative solution that is both different from MS Windows NT4 and offers advantages compared with it. Gain recognition that Samba-3 lacks many of the features that Microsoft has promoted as core values in migration from MS Windows NT4 to MS Windows 2000 and beyond (with or without Active Directory services).

    -What are the features that Samba-3 can NOT provide? -

    • Active Directory Server

    • Group Policy Objects (in Active Directory)

    • Machine Policy objects

    • Logon Scripts in Active Directory

    • Software Application and Access Controls in Active Directory

    -The features that Samba-3 DOES provide and that may be of compelling interest to your site -includes: -

    • Lower Cost of Ownership

    • Global availability of support with no strings attached

    • Dynamic SMB Servers (ie:Can run more than one server per Unix/Linux system)

    • Creation of on-the-fly logon scripts

    • Creation of on-the-fly Policy Files

    • Greater Stability, Reliability, Performance and Availability

    • Manageability via an ssh connection

    • Flexible choices of back-end authentication technologies (tdbsam, ldapsam, mysqlsam)

    • Ability to implement a full single-sign-on architecture

    • Ability to distribute authentication systems for absolute minimum wide area network bandwidth demand

    -Before migrating a network from MS Windows NT4 to Samba-3 consider all necessary factors. Users -should be educated about changes they may experience so that the change will be a welcome one +What are the features that Samba-3 cannot provide? +

    • Active Directory Server.

    • Group Policy Objects (in Active Directory).

    • Machine Policy Objects.

    • Logon Scripts in Active Directory.

    • Software Application and Access Controls in Active Directory.

    +The features that Samba-3 does provide and that may be of compelling interest to your site +include: +

    • Lower cost of ownership.

    • Global availability of support with no strings attached.

    • Dynamic SMB Servers (can run more than one SMB/CIFS server per UNIX/Linux system).

    • Creation of on-the-fly logon scripts.

    • Creation of on-the-fly Policy Files.

    • Greater stability, reliability, performance and availability.

    • Manageability via an ssh connection.

    • Flexible choices of back-end authentication technologies (tdbsam, ldapsam, mysqlsam).

    • Ability to implement a full single-sign-on architecture.

    • Ability to distribute authentication systems for absolute minimum wide area network bandwidth demand.

    +Before migrating a network from MS Windows NT4 to Samba-3, consider all necessary factors. Users +should be educated about changes they may experience so the change will be a welcome one and not become an obstacle to the work they need to do. The following are factors that will help ensure a successful migration: -

    Domain Layout

    -Samba-3 can be configured as a domain controller, a back-up domain controller (probably best called -a secondary controller), a domain member, or as a stand-alone server. The Windows network security +

    Domain Layout

    +Samba-3 can be configured as a Domain Controller, a back-up Domain Controller (probably best called +a secondary controller), a Domain Member, or as a stand-alone Server. The Windows network security domain context should be sized and scoped before implementation. Particular attention needs to be -paid to the location of the primary domain controller (PDC) as well as backup controllers (BDCs). +paid to the location of the primary Domain Controller (PDC) as well as backup controllers (BDCs). One way in which Samba-3 differs from Microsoft technology is that if one chooses to use an LDAP -authentication backend then the same database can be used by several different domains. In a -complex organisation there can be a single LDAP database, which itself can be distributed (ie: Have +authentication backend, then the same database can be used by several different domains. In a +complex organization, there can be a single LDAP database, which itself can be distributed (have a master server and multiple slave servers) that can simultaneously serve multiple domains.

    -From a design perspective, the number of users per server, as well as the number of servers, per +>From a design perspective, the number of users per server as well as the number of servers per domain should be scaled taking into consideration server capacity and network bandwidth.

    A physical network segment may house several domains. Each may span multiple network segments. Where domains span routed network segments, consider and test the performance implications of -the design and layout of a network. A Centrally located domain controller that is designed to +the design and layout of a network. A centrally located Domain Controller that is designed to serve multiple routed network segments may result in severe performance problems. Check the -response time (eg: ping timing) between the remote segment and the PDC. If long (more than 100 ms) -locate a backup controller (BDC) on the remote segmanet to serve as the local authentication and +response time (ping timing) between the remote segment and the PDC. If +it's long (more than 100 ms), +locate a backup controller (BDC) on the remote segment to serve as the local authentication and access control server. -

    Server Share and Directory Layout

    -There are cardinal rules to effective network design. These can not be broken with impunity. -The most important rule: Simplicity is king in every well controlled network. Every part of -the infrastructure must be managed, the more complex it is, the greater will be the demand +

    Server Share and Directory Layout

    +There are cardinal rules to effective network design that cannot be broken with impunity. +The most important rule: Simplicity is king in every well-controlled network. Every part of +the infrastructure must be managed; the more complex it is, the greater will be the demand of keeping systems secure and functional.

    -Keep in mind the nature of how data must be share. Physical disk space layout should be considered +Keep in mind the nature of how data must be shared. Physical disk space layout should be considered carefully. Some data must be backed up. The simpler the disk layout the easier it will be to -keep track of backed needs. Identify what back media will be meet needs, consider backup to tape -, CD-ROM or (DVD-ROM), or other off-line storage medium. Plan and implement for minimum -maintenance. Leave nothing to chance in your design, above all, do not leave backups to chance: -Backup and test, validate every backup, create a disaster recovery plan and prove that it works. +keep track of backup needs. Identify what backup media will meet your needs; consider backup to tape, +CD-ROM or (DVD-ROM), or other offline storage medium. Plan and implement for minimum +maintenance. Leave nothing to chance in your design; above all, do not leave backups to chance: +Backup, test, and validate every backup, create a disaster recovery plan and prove that it works.

    Users should be grouped according to data access control needs. File and directory access -is best controlled via group permissions and the use of the "sticky bit" on group controlled -directories may substantially avoid file access complaints from samba share users. +is best controlled via group permissions and the use of the “sticky bit” on group controlled +directories may substantially avoid file access complaints from Samba share users.

    Inexperienced network administrators often attempt elaborate techniques to set access controls on files, directories, shares, as well as in share definitions. @@ -14416,134 +14422,284 @@ Keep your design and implementation simple and document your design extensively. audit your documentation. Do not create a complex mess that your successor will not understand. Remember, job security through complex design and implementation may cause loss of operations and downtime to users as the new administrator learns to untangle your knots. Keep access -controls simple and effective and make sure that users will never be interrupted by stupid +controls simple and effective and make sure that users will never be interrupted by obtuse complexity. -

    Logon Scripts

    -Logon scripts can help to ensure that all users gain share and printer connections they need. +

    Logon Scripts

    +Logon scripts can help to ensure that all users gain the share and printer connections they need.

    -Logon scripts can be created 'on-the-fly' so that all commands executed are specific to the -rights and priviliges granted to the user. The preferred controls should be affected through -group membership so that group information can be used to custom create a logon script using -the root preexec parameters to the NETLOGON share. +Logon scripts can be created on-the-fly so all commands executed are specific to the +rights and privileges granted to the user. The preferred controls should be affected through +group membership so group information can be used to create a custom logon script using +the root preexec parameters to the NETLOGON share.

    Some sites prefer to use a tool such as kixstart to establish a controlled -user environment. In any case you may wish to do a google search for logon script process controls. -In particular, you may wish to explore the use of the Microsoft knowledgebase article KB189105 that +user environment. In any case, you may wish to do a Google search for logon script process controls. +In particular, you may wish to explore the use of the Microsoft KnowledgeBase article KB189105 that deals with how to add printers without user intervention via the logon script process. -

    Profile Migration/Creation

    +

    Profile Migration/Creation

    User and Group Profiles may be migrated using the tools described in the section titled Desktop Profile Management.

    + Profiles may also be managed using the Samba-3 tool profiles. This tool allows -the MS Windows NT style security identifiers (SIDs) that are stored inside the profile NTuser.DAT file +the MS Windows NT-style security identifiers (SIDs) that are stored inside the profile NTuser.DAT file to be changed to the SID of the Samba-3 domain. -

    User and Group Accounts

    +

    User and Group Accounts

    It is possible to migrate all account settings from an MS Windows NT4 domain to Samba-3. Before -attempting to migrate user and group accounts it is STRONGLY advised to create in Samba-3 the -groups that are present on the MS Windows NT4 domain AND to map these to -suitable Unix/Linux groups. By following this simple advice all user and group attributes +attempting to migrate user and group accounts, it is STRONGLY advised to create in Samba-3 the +groups that are present on the MS Windows NT4 domain AND to map them to +suitable UNIX/Linux groups. By following this simple advice, all user and group attributes should migrate painlessly. -

    Steps In Migration Process

    +

    Steps in Migration Process

    The approximate migration process is described below.

    • -You will have an NT4 PDC that has the users, groups, policies and profiles to be migrated +You have an NT4 PDC that has the users, groups, policies and profiles to be migrated.

    • -Samba-3 set up as a DC with netlogon share, profile share, etc. Configure the smb.conf file -to fucntion as a BDC. ie: domain master = No. -

    Procedure 31.1. The Account Migration Process

    1. Create a BDC account for the samba server using NT Server Manager

      1. Samba must NOT be running

    2. net rpc join -S NT4PDC -w DOMNAME -U Administrator%passwd

    3. net rpc vampire -S NT4PDC -U administrator%passwd

    4. pdbedit -L

      1. Note - did the users migrate?

    5. +Samba-3 set up as a DC with netlogon share, profile share, and so on. Configure the smb.conf file +to fucntion as a BDC, i.e., domain master = No. +

    Procedure 31.1. The Account Migration Process

    1. + + Create a BDC account in the old NT4 domain for the Samba server using NT Server Manager.

      1. Samba must not be running.

    2. + + net rpc join -S NT4PDC -w DOMNAME -U Administrator%passwd

    3. net rpc vampire -S NT4PDC -U administrator%passwd

    4. pdbedit -L

      1. Note did the users migrate?

    5. + + Now assign each of the UNIX groups to NT groups: - (Note: It may be useful to copy this text to a script called - initGroups.sh) + (It may be useful to copy this text to a script called initGroups.sh)

       #!/bin/bash
       #### Keep this as a shell script for future re-use
       			
       # First assign well known domain global groups
      -net groupmap modify ntgroup="Domain Admins" unixgroup=ntadmins
      -net groupmap modify ntgroup="Domain Guests" unixgroup=nobody
      -net groupmap modify ntgroup="Domain Users" unixgroup=users
      +net groupmap modify ntgroup="Domain Admins" unixgroup=root   rid=512
      +net groupmap modify ntgroup="Domain Users"  unixgroup=users  rid=513
      +net groupmap modify ntgroup="Domain Guests" unixgroup=nobody rid=514
       
       # Now for our added domain global groups
       net groupmap add ntgroup="Designers" unixgroup=designers type=d rid=3200
       net groupmap add ntgroup="Engineers" unixgroup=engineers type=d rid=3210
       net groupmap add ntgroup="QA Team"   unixgroup=qateam    type=d rid=3220
       

      -

    6. net groupmap list

      1. Now check that all groups are recognised

    -Now migrate all the profiles, then migrate all policy files. -

    Migration Options

    -Sites that wish to migrate from MS Windows NT4 Domain Control to a Samba based solution -generally fit into three basic categories. -

    Table 31.1. The 3 Major Site Types

    Number of UsersDescription
    < 50

    Want simple conversion with NO pain

    50 - 250

    Want new features, can manage some in-house complexity

    > 250

    Solution/Implementation MUST scale well, complex needs. Cross departmental decision process. Local expertise in most areas

    Planning for Success

    +

  • net groupmap list

    1. Check that all groups are recognized.

  • +Migrate all the profiles, then migrate all policy files. +

    Migration Options

    +Sites that wish to migrate from MS Windows NT4 Domain Control to a Samba-based solution +generally fit into three basic categories. shows the possibilities. +

    Table 31.1. The Three Major Site Types

    Number of UsersDescription
    < 50

    Want simple conversion with no pain.

    50 - 250

    Want new features, can manage some in-house complexity.

    > 250

    Solution/Implementation must scale well, complex needs. Cross-departmental decision process. Local expertise in most areas.

    Planning for Success

    There are three basic choices for sites that intend to migrate from MS Windows NT4 -to Samba-3. +to Samba-3:

    • - Simple Conversion (total replacement) + Simple conversion (total replacement).

    • - Upgraded Conversion (could be one of integration) + Upgraded conversion (could be one of integration).

    • - Complete Redesign (completely new solution) + Complete redesign (completely new solution).

    -Minimise down-stream problems by: +Minimize down-stream problems by:

    • - Take sufficient time + Taking sufficient time.

    • - Avoid Panic + Avoiding Panic.

    • - Test ALL assumptions + Testing all assumptions.

    • - Test full roll-out program, including workstation deployment -

    Table 31.2. Nature of the Conversion Choices

    SimpleUpgradedRedesign

    Make use of minimal OS specific features

    Translate NT4 features to new host OS features

    Decide:

    Suck all accounts from NT4 into Samba-3

    Copy and improve:

    Authentication Regime (database location and access)

    Make least number of operational changes

    Make progressive improvements

    Desktop Management Methods

    Take least amount of time to migrate

    Minimise user impact

    Better Control of Desktops / Users

    Live versus Isolated Conversion

    Maximise functionality

    Identify Needs for: Manageability, Scalability, Security, Availability

    Integrate Samba-3 then migrate while users are active, then Change of control (ie: swap out)

    Take advantage of lower maintenance opportunity

    Samba-3 Implementation Choices

    Authentication database/back end:

    + Testing the full roll-out program, including workstation deployment. +

    lists the conversion choices given the type of migration +being contemplated. +

    Table 31.2. Nature of the Conversion Choices

    SimpleUpgradedRedesign

    Make use of minimal OS specific features.

    Translate NT4 features to new host OS features.

    Decide:

    Move all accounts from NT4 into Samba-3

    Copy and improve

    Authentication regime (database location and access)

    Make least number of operational changes

    Make progressive improvements

    Desktop management methods

    Take least amount of time to migrate

    Minimize user impact

    Better control of Desktops/Users

    Live versus isolated conversion

    Maximize functionality

    Identify Needs for: Manageability, Scalability, Security, Availability

    Integrate Samba-3 then migrate while users are active, then change of control (swap out)

    Take advantage of lower maintenance opportunity

    Samba-3 Implementation Choices

    Authentication Database/Backend

    Samba-3 can use an external authentication backend:

    -

    • Winbind (external Samba or NT4/200x server)

    • External server could use Active Directory or NT4 Domain

    • Can use pam_mkhomedir.so to auto-create home dirs

    -

    - Samba-3 can use a local authentication backend: -

    • smbpasswd, tdbsam, ldapsam, mysqlsam

    -

    Access Control Points:
    • On the Share itself - using Share ACLs

    • On the file system - using UNIX permissions on files and directories

      Note: Can Enable Posix ACLs in file system also

    • Through Samba share parameters - Not recommended - except as last resort

    Policies (migrate or create new ones):
    • Using Group Policy Editor (NT4)

    • - Watch out for Tattoo effect

    User and Group Profiles:

    - Platform specific so use platform tool to change from a Local to a Roaming profile - Can use new profiles tool to change SIDs (NTUser.DAT) -

    Logon Scripts:

    - Know how they work -

    User and Group mapping to Unix/Linux:
    • username map facility may be needed

    • Use 'net groupmap' to connect NT4 groups to Unix groups

    • Use pdbedit to set/change user configuration

      - NOTE: When migrating to LDAP back, end it may be easier to dump initial - LDAP database to LDIF, then edit, then reload into LDAP -

    OS specific scripts/programs may be needed:
    • Add/Delete Users: Note OS limits on size of name - (Linux 8 chars) NT4 up to 254 chars

    • Add/Delete Machines: Applied only to domain members - (Note: Machine names may be limited to 16 characters)

    • Use 'net groupmap' to connect NT4 groups to Unix groups

    • Add/Delete Groups: Note OS limits on size and nature. - Linux limit is 16 char, no spaces and no upper case chars (groupadd)

    Migration Tools:

    +

    • Winbind (external Samba or NT4/200x server).

    • External server could use Active Directory or NT4 Domain.

    • Can use pam_mkhomedir.so to auto-create home dirs.

    • + Samba-3 can use a local authentication backend: smbpasswd, tdbsam, ldapsam, mysqlsam

    +

    Access Control Points

    + Samba permits Access Control Points to be set: +

    • On the share itself using Share ACLs.

    • On the file system using UNIX permissions on files and directories.

      Note: Can enable Posix ACLs in file system also.

    • Through Samba share parameters not recommended except as last resort.

    Policies (migrate or create new ones)

    + Exercise great caution when affecting registry changes, use the right tool and be aware + that changes made through NT4-style NTConfig.POL files can leave + permanent changes. +

    • Using Group Policy Editor (NT4).

    • Watch out for Tattoo effect.

    User and Group Profiles

    + Platform-specific so use platform tool to change from a Local to a Roaming profile. + Can use new profiles tool to change SIDs (NTUser.DAT). +

    Logon Scripts

    + Know how they work. +

    User and Group Mapping to UNIX/Linux

    + + User and Group mapping code is new. Many problems have been experienced as network administrators + who are familiar with Samba-2.2.x migrate to Samba-3. Carefully study the chapters that document + the new password backend behavior and the new group mapping functionality. +

    • The username map facility may be needed.

    • Use net groupmap to connect NT4 groups to UNIX groups.

    • Use pdbedit to set/change user configuration.

      + When migrating to LDAP backend, it may be easier to dump the initial + LDAP database to LDIF, edit, then reload into LDAP. +

    OS Specific Scripts/Programs may be Needed

    + Every operating system has its peculiarities. These are the result of engineering decisions + that were based on the experience of the designer, and may have side-effects that were not + anticipated. Limitations that may bite the Windows network administrator include: +

    • Add/Delete Users: Note OS limits on size of name + (Linux 8 chars) NT4 up to 254 chars.

    • Add/Delete Machines: Applied only to Domain Members + (Note: machine names may be limited to 16 characters).

    • Use net groupmap to connect NT4 groups to UNIX groups.

    • Add/Delete Groups: Note OS limits on size and nature. + Linux limit is 16 char, no spaces and no upper case chars (groupadd).

    Migration Tools

    + Domain Control (NT4 Style) Profiles, Policies, Access Controls, Security -

    • Samba: net, rpcclient, smbpasswd, pdbedit, profiles

    • Windows: NT4 Domain User Manager, Server Manager (NEXUS)

    -

    Chapter 32. SWAT - The Samba Web Administration Tool

    John H. Terpstra

    Samba Team

    April 21, 2003

    -There are many and varied opinions regarding the usefulness or otherwise of SWAT. -No matter how hard one tries to produce the perfect configuration tool it remains -an object of personal taste. SWAT is a tool that will allow web based configuration -of samba. It has a wizard that may help to get samba configured quickly, it has context -sensitive help on each smb.conf parameter, it provides for monitoring of current state -of connection information, and it allows network wide MS Windows network password +

    • Samba: net, rpcclient, smbpasswd, pdbedit, profiles.

    • Windows: NT4 Domain User Manager, Server Manager (NEXUS)

    +

    Chapter 32. SWAT The Samba Web Administration Tool

    John H. Terpstra

    Samba Team

    April 21, 2003

    +There are many and varied opinions regarding the usefulness of SWAT. +No matter how hard one tries to produce the perfect configuration tool, it remains +an object of personal taste. SWAT is a tool that will allow Web-based configuration +of Samba. It has a wizard that may help to get Samba configured +quickly, it has context-sensitive help on each smb.conf parameter, it provides for monitoring of current state +of connection information, and it allows network-wide MS Windows network password management. -

    Features and Benefits

    +

    Features and Benefits

    +SWAT is a facility that is part of the Samba suite. The main executable is called +swat and is invoked by the inter-networking super daemon. +See for details. +

    +SWAT uses integral samba components to locate parameters supported by the particular +version of Samba. Unlike tools and utilities that are external to Samba, SWAT is always +up to date as known Samba parameters change. SWAT provides context-sensitive help for each +configuration parameter, directly from man page entries. +

    There are network administrators who believe that it is a good idea to write systems -documentation inside configuration files, for them SWAT will aways be a nasty tool. SWAT +documentation inside configuration files, and for them SWAT will aways be a nasty tool. SWAT does not store the configuration file in any intermediate form, rather, it stores only the -parameter settings, so when SWAT writes the smb.conf file to disk it will write only -those parameters that are at other than the default settings. The result is that all comments -will be lost from the smb.conf file. Additionally, the parameters will be written back in -internal ordering. +parameter settings, so when SWAT writes the smb.conf file to disk, it will write only +those parameters that are at other than the default settings. The result is that all comments, +as well as parameters that are no longer supported, will be lost from the smb.conf file. +Additionally, the parameters will be written back in internal ordering.

    Note

    -So before using SWAT please be warned - SWAT will completely replace your smb.conf with -a fully optimised file that has been stripped of all comments you might have placed there +Before using SWAT, please be warned SWAT will completely replace your smb.conf with +a fully-optimized file that has been stripped of all comments you might have placed there and only non-default settings will be written to the file. -

    Enabling SWAT for use

    -SWAT should be installed to run via the network super daemon. Depending on which system -your UNIX/Linux system has you will have either an inetd or -xinetd based system. +

    Guidelines and Technical Tips

    +This section aims to unlock the dark secrets behind how SWAT may be made to work, +may be made more secure, and how to solve Internationalization support problems. +

    Validate SWAT Installation

    +The very first step that should be taken before attempting to configure a host +system for SWAT operation is to check that it is installed. This may seem a trivial +point to some, however several Linux distributions do not install SWAT by default, +even though they do ship an installable binary support package containing SWAT +on the distribution media. +

    +When you have configrmed that SWAT is installed it is necessary to validate +that the installation includes the binary swat file as well +as all the supporting text and Web files. A number of operating system distributions +in the past have failed to include the necessary support files, evne though the +swat binary executable file was installed. +

    +Finally, when you are sure that SWAT has been fully installed, please check the SWAT +has been enebled in the control file for the internetworking super-daemon (inetd or xinetd) +that is used on your operating system platform. +

    Locating the swat File

    +To validate that SWAT is installed, first locate the swat binary +file on the system. It may be found under the following directories: +

    /usr/local/samba/bin the default Samba location.
    /usr/sbin the default location on most Linux systems.
    /opt/samba/bin

    +

    +The actual location is much dependant on the choice of the operating system vendor, or as determined +by the administrator who compiled and installed Samba. +

    +There are a number methods that may be used to locate the swat binary file. +The following methods may be helpful: +

    +If swat is in your current operating system search path it will be easy to +find it. You can ask what are the command-line options for swat as shown here: +

    +frodo:~ # swat -?
    +Usage: swat [OPTION...]
    +  -a, --disable-authentication         Disable authentication (demo mode)
    +
    +Help options:
    +  -?, --help                           Show this help message
    +  --usage                              Display brief usage message
    +
    +Common samba options:
    +  -d, --debuglevel=DEBUGLEVEL          Set debug level
    +  -s, --configfile=CONFIGFILE          Use alternative configuration file
    +  -l, --log-basename=LOGFILEBASE       Basename for log/debug files
    +  -V, --version                        Print version
    +

    +

    Locating the SWAT Support Files

    +Now that you have found that swat is in the search path, it is easy +to identify where the file is located. Here is another simple way this may be done: +

    +frodo:~ # whereis swat
    +swat: /usr/sbin/swat /usr/share/man/man8/swat.8.gz
    +

    +

    +If the above measures fail to locate the swat binary, another approach +is needed. The following may be used: +

    +frodo:/ # find / -name swat -print
    +/etc/xinetd.d/swat
    +/usr/sbin/swat
    +/usr/share/samba/swat
    +frodo:/ #
    +

    +

    +This list shows that there is a control file for xinetd, the internetwork +super-daemon that is installed on this server. The location of the SWAT binary file is +/usr/sbin/swat, and the support files for it are located under the +directory /usr/share/samba/swat. +

    +We must now check where swat expects to find its support files. This can +be done as follows: +

    +frodo:/ # strings /usr/sbin/swat | grep "/swat"
    +/swat/
    +...
    +/usr/share/samba/swat
    +frodo:/ #
    +

    +

    +The /usr/share/samba/swat/ entry shown in this listing is the location of the +support files. You should verify that the support files exist under this directory. A sample +list is as shown: +

    +jht@frodo:/> find /usr/share/samba/swat -print
    +/usr/share/samba/swat
    +/usr/share/samba/swat/help
    +/usr/share/samba/swat/lang
    +/usr/share/samba/swat/lang/ja
    +/usr/share/samba/swat/lang/ja/help
    +/usr/share/samba/swat/lang/ja/help/welcome.html
    +/usr/share/samba/swat/lang/ja/images
    +/usr/share/samba/swat/lang/ja/images/home.gif
    +...
    +/usr/share/samba/swat/lang/ja/include
    +/usr/share/samba/swat/lang/ja/include/header.nocss.html
    +...
    +/usr/share/samba/swat/lang/tr
    +/usr/share/samba/swat/lang/tr/help
    +/usr/share/samba/swat/lang/tr/help/welcome.html
    +/usr/share/samba/swat/lang/tr/images
    +/usr/share/samba/swat/lang/tr/images/home.gif
    +...
    +/usr/share/samba/swat/lang/tr/include
    +/usr/share/samba/swat/lang/tr/include/header.html
    +/usr/share/samba/swat/using_samba
    +...
    +/usr/share/samba/swat/images
    +/usr/share/samba/swat/images/home.gif
    +...
    +/usr/share/samba/swat/include
    +/usr/share/samba/swat/include/footer.html
    +/usr/share/samba/swat/include/header.html
    +jht@frodo:/>
    +

    +

    +If the files needed are not available it will be necessary to obtain and install them +before SWAT can be used. +

    Enabling SWAT for Use

    +SWAT should be installed to run via the network super-daemon. Depending on which system +your UNIX/Linux system has, you will have either an inetd- or +xinetd-based system.

    The nature and location of the network super-daemon varies with the operating system implementation. The control file (or files) can be located in the file -/etc/inetd.conf or in the directory /etc/[x]inet.d +/etc/inetd.conf or in the directory /etc/[x]inet[d].d or similar.

    The control entry for the older style file might be: +

     	# swat is the Samba Web Administration Tool
     	swat stream tcp nowait.400 root /usr/sbin/swat swat
    @@ -14551,852 +14707,935 @@ The control entry for the older style file might be:
     A control file for the newer style xinetd could be:
     

    -	# default: off
    -	# description: SWAT is the Samba Web Admin Tool. Use swat \
    -	#              to configure your Samba server. To use SWAT, \
    -	#              connect to port 901 with your favorite web browser.
    -	service swat
    -	{
    -		port    = 901
    -		socket_type     = stream
    -		wait    = no
    -		only_from = localhost
    -		user    = root
    -		server  = /usr/sbin/swat
    -		log_on_failure  += USERID
    -		disable = yes
    -	}
    +# default: off
    +# description: SWAT is the Samba Web Admin Tool. Use swat \
    +#              to configure your Samba server. To use SWAT, \
    +#              connect to port 901 with your favorite web browser.
    +service swat
    +{
    +	port    = 901
    +	socket_type     = stream
    +	wait    = no
    +	only_from = localhost
    +	user    = root
    +	server  = /usr/sbin/swat
    +	log_on_failure  += USERID
    +	disable = yes
    +}
     

    -Both the above examples assume that the swat binary has been -located in the /usr/sbin directory. In addition to the above -SWAT will use a directory access point from which it will load it's help files +Both of the above examples assume that the swat binary has been +located in the /usr/sbin directory. In addition to the above, +SWAT will use a directory access point from which it will load its Help files as well as other control information. The default location for this on most Linux systems is in the directory /usr/share/samba/swat. The default -location using samba defaults will be /usr/local/samba/swat. +location using Samba defaults will be /usr/local/samba/swat.

    -Access to SWAT will prompt for a logon. If you log onto SWAT as any non-root user +Access to SWAT will prompt for a logon. If you log onto SWAT as any non-root user, the only permission allowed is to view certain aspects of configuration as well as access to the password change facility. The buttons that will be exposed to the non-root user are: HOME, STATUS, VIEW, PASSWORD. The only page that allows change capability in this case is PASSWORD.

    -So long as you log onto SWAT as the user root you should obtain -full change and commit ability. The buttons that will be exposed includes: +As long as you log onto SWAT as the user root, you should obtain +full change and commit ability. The buttons that will be exposed include: HOME, GLOBALS, SHARES, PRINTERS, WIZARD, STATUS, VIEW, PASSWORD. -

    Securing SWAT through SSL

    -Lots of people have asked about how to setup SWAT with SSL to allow for secure remote -administration of Samba. Here is a method that works, courtesy of Markus Krieger +

    Securing SWAT through SSL

    + +Many people have asked about how to setup SWAT with SSL to allow for secure remote +administration of Samba. Here is a method that works, courtesy of Markus Krieger.

    -Modifications to the swat setup are as following: +Modifications to the SWAT setup are as follows:

    1. - install OpenSSL + Install OpenSSL.

    2. - generate certificate and private key + Generate certificate and private key.

       root# /usr/bin/openssl req -new -x509 -days 365 -nodes -config \
       	/usr/share/doc/packages/stunnel/stunnel.cnf \
       	-out /etc/stunnel/stunnel.pem -keyout /etc/stunnel/stunnel.pem
       
    3. - remove swat-entry from [x]inetd + Remove swat-entry from [x]inetd.

    4. - start stunnel + Start stunnel.

       root# stunnel -p /etc/stunnel/stunnel.pem -d 901 \
       	 -l /usr/local/samba/bin/swat swat 
       

    -afterwords simply contact to swat by using the URL https://myhost:901, accept the certificate +Afterward, simply connect to swat by using the URL https://myhost:901, accept the certificate and the SSL connection is up. -

    The SWAT Home Page

    +

    Enabling SWAT Internationalization Support

    +SWAT can be configured to display its messages to match the settings of +the language configurations of your Web browser. It will be passed to SWAT +in the Accept-Language header of the HTTP request. +

    + +

    +To enable this feature: +

    + +

    • + Install the proper msg files from the Samba + source/po directory into $LIBDIR. +

    • + Set the correct locale value for display charset. +

    • + Set your browser's language setting. +

    + +

    +The name of msg file is same as the language ID sent by the browser. For +example en means "English", ja means "Japanese", fr means "French. +

    + +

    +If you do not like some of messages, or there are no msg files for +your locale, you can create them simply by copying the en.msg files +to the dirertory for “your language ID.msg” and filling in proper strings +to each “msgstr”. For example, in it.msg, the +msg file for the Italian locale, just set: +

    +msgid "Set Default"
    +msgstr "Imposta Default"
    +

    +and so on. If you find a mistake or create a new msg file, please email it +to us so we will include this in the next release of Samba. +

    + +

    +Note that if you enable this feature and the display charset is not +matched to your browser's setting, the SWAT display may be corrupted. In a future version of +Samba, SWAT will always display messages with UTF-8 encoding. You will then not need to set +this smb.conf file parameter. +

    Overview and Quick Tour

    +SWAT is a tools that many be used to configure Samba, or just to obtain useful links +to important reference materials such as the contents of this book, as well as other +documents that have been found useful for solving Windows networking problems. +

    The SWAT Home Page

    The SWAT title page provides access to the latest Samba documentation. The manual page for -each samba component is accessible from this page as are the Samba-HOWTO-Collection (this -document) as well as the O'Reilly book "Using Samba". +each Samba component is accessible from this page, as are the Samba HOWTO-Collection (this +document) as well as the O'Reilly book “Using Samba.

    -Administrators who wish to validate their samba configuration may obtain useful information +Administrators who wish to validate their Samba configuration may obtain useful information from the man pages for the diagnostic utilities. These are available from the SWAT home page -also. One diagnostic tool that is NOT mentioned on this page, but that is particularly -useful is ethereal. +also. One diagnostic tool that is not mentioned on this page, but that is particularly +useful is ethereal.

    Warning

    -SWAT can be configured to run in demo mode. This is NOT recommended -as it runs SWAT without authentication and with full administrative ability. ie: Allows -changes to smb.conf as well as general operation with root privileges. The option that -creates this ability is the -a flag to swat. Do not use this in any +SWAT can be configured to run in demo mode. This is not recommended +as it runs SWAT without authentication and with full administrative ability. Allows +changes to smb.conf as well as general operation with root privileges. The option that +creates this ability is the -a flag to swat. Do not use this in a production environment. -

    Global Settings

    -The Globals button will expose a page that allows configuration of the global parameters -in smb.conf. There are three levels of exposure of the parameters: +

    Global Settings

    +The GLOBALS button will expose a page that allows configuration of the global parameters +in smb.conf. There are two levels of exposure of the parameters:

    • - Basic - exposes common configuration options. + Basic exposes common configuration options.

    • - Advanced - exposes configuration options needed in more + Advanced exposes configuration options needed in more complex environments. -

    • - Developer - exposes configuration options that only the brave - will want to tamper with.

    -To switch to other than Basic editing ability click on either the -Advanced or the Developer button. You may also -do this by clicking on the radio button, then click the Commit Changes button. +To switch to other than Basic editing ability, click on Advanced. +You may also do this by clicking on the radio button, then click on the Commit Changes button.

    -After making any changes to configuration parameters make sure that you click on the -Commit Changes button before moving to another area otherwise -your changes will be immediately lost. +After making any changes to configuration parameters, make sure that +you click on the +Commit Changes button before moving to another area, otherwise +your changes will be lost.

    Note

    -SWAT has context sensitive help. To find out what each parameter is for simply click the +SWAT has context-sensitive help. To find out what each parameter is +for, simply click on the Help link to the left of the configuration parameter. -

    Share Settings

    -To affect a currently configured share, simply click on the pull down button between the +

    Share Settings

    +To effect a currently configured share, simply click on the pull down button between the Choose Share and the Delete Share buttons, -select the share you wish to operate on, then to edit the settings click on the -Choose Share button, to delete the share simply press the +select the share you wish to operate on, then to edit the settings +click on the +Choose Share button. To delete the share, simply press the Delete Share button.

    -To create a new share, next to the button labelled Create Share enter +To create a new share, next to the button labeled Create Share enter into the text field the name of the share to be created, then click on the Create Share button. -

    Printers Settings

    +

    Printers Settings

    To affect a currently configured printer, simply click on the pull down button between the Choose Printer and the Delete Printer buttons, -select the printer you wish to operate on, then to edit the settings click on the -Choose Printer button, to delete the share simply press the +select the printer you wish to operate on, then to edit the settings +click on the +Choose Printer button. To delete the share, simply press the Delete Printer button.

    -To create a new printer, next to the button labelled Create Printer enter +To create a new printer, next to the button labeled Create Printer enter into the text field the name of the share to be created, then click on the Create Printer button. -

    The SWAT Wizard

    -The purpose if the SWAT Wizard is to help the Microsoft knowledgeable network administrator +

    The SWAT Wizard

    +The purpose if the SWAT Wizard is to help the Microsoft-knowledgeable network administrator to configure Samba with a minimum of effort.

    -The Wizard page provides a tool for rewriting the smb.conf file in fully optimised format. -This will also happen if you press the commit button. The two differ in the the rewrite button -ignores any changes that may have been made, while the Commit button causes all changes to be -affected. +The Wizard page provides a tool for rewriting the smb.conf file in fully optimized format. +This will also happen if you press the Commit button. The two differ +since the Rewrite button ignores any changes that may have been made, +while the Commit button causes all changes to be affected.

    The Edit button permits the editing (setting) of the minimal set of options that may be necessary to create a working Samba server.

    Finally, there are a limited set of options that will determine what type of server Samba will be configured for, whether it will be a WINS server, participate as a WINS client, or -operate with no WINS support. By clicking on one button you can elect to expose (or not) user +operate with no WINS support. By clicking one button, you can elect to expose (or not) user home directories. -

    The Status Page

    -The status page serves a limited purpose. Firstly, it allows control of the samba daemons. -The key daemons that create the samba server environment are: smbd, nmbd, winbindd. +

    The Status Page

    +The status page serves a limited purpose. First, it allows control of the Samba daemons. +The key daemons that create the Samba server environment are: smbd, nmbd, winbindd.

    The daemons may be controlled individually or as a total group. Additionally, you may set -an automatic screen refresh timing. As MS Windows clients interact with Samba new smbd processes +an automatic screen refresh timing. As MS Windows clients interact with Samba, new smbd processes will be continually spawned. The auto-refresh facility will allow you to track the changing conditions with minimal effort.

    Lastly, the Status page may be used to terminate specific smbd client connections in order to free files that may be locked. -

    The View Page

    -This page allows the administrator to view the optimised smb.conf file and, if you are +

    The View Page

    +This page allows the administrator to view the optimized smb.conf file and, if you are particularly masochistic, will permit you also to see all possible global configuration parameters and their settings. -

    The Password Change Page

    -The Password Change page is a popular tool. This tool allows the creation, deletion, deactivation -and reactivation of MS Windows networking users on the local machine. Alternatively, you can use +

    The Password Change Page

    +The Password Change page is a popular tool that allows the creation, deletion, deactivation, +and reactivation of MS Windows networking users on the local machine. Alternately, you can use this tool to change a local password for a user account.

    -When logged in as a non-root account the user will have to provide the old password as well as -the new password (twice). When logged in as root only the new password is +When logged in as a non-root account, the user will have to provide the old password as well as +the new password (twice). When logged in as root, only the new password is required.

    One popular use for this tool is to change user passwords across a range of remote MS Windows servers. -

    Troubleshooting

    Chapter 33. The Samba Checklist

    Andrew Tridgell

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    Dan Shearer

    Samba Team

    Wed Jan 15

    Introduction

    This file contains a list of tests you can perform to validate your Samba server. It also tells you what the likely cause of the problem -is if it fails any one of these steps. If it passes all these tests +is if it fails any one of these steps. If it passes all these tests, then it is probably working fine.

    -You should do ALL the tests, in the order shown. We have tried to +You should do all the tests, in the order shown. We have tried to carefully choose them so later tests only use capabilities verified in -the earlier tests. However, do not stop at the first error as there +the earlier tests. However, do not stop at the first error as there have been some instances when continuing with the tests has helped to solve a problem.

    -If you send one of the samba mailing lists an email saying "it doesn't work" -and you have not followed this test procedure then you should not be surprised +If you send one of the Samba mailing lists an email saying, “it does not work” +and you have not followed this test procedure, you should not be surprised if your email is ignored. -

    Assumptions

    -In all of the tests it is assumed you have a Samba server called +

    Assumptions

    +In all of the tests, it is assumed you have a Samba server called BIGSERVER and a PC called ACLIENT both in workgroup TESTGROUP.

    The procedure is similar for other types of clients.

    It is also assumed you know the name of an available share in your -smb.conf. I will assume this share is called tmp. -You can add a tmp share like this by adding the -following to smb.conf: -

    Example 33.1. smb.conf with [tmp] share

    [tmp]
    comment = temporary files
    path = /tmp
    read only = yes

    +smb.conf. I will assume this share is called tmp. +You can add a tmp share like this by adding the +lines shown in . +

    Example 33.1. smb.conf with [tmp] share

    [tmp]
    comment = temporary files
    path = /tmp
    read only = yes

    Note

    -These tests assume version 3.0 or later of the samba suite. +These tests assume version 3.0.0 or later of the Samba suite. Some commands shown did not exist in earlier versions.

    Please pay attention to the error messages you receive. If any error message -reports that your server is being unfriendly you should first check that your -IP name resolution is correctly set up. eg: Make sure your /etc/resolv.conf +reports that your server is being unfriendly, you should first check that your +IP name resolution is correctly set up. Make sure your /etc/resolv.conf file points to name servers that really do exist.

    -Also, if you do not have DNS server access for name resolution please check +Also, if you do not have DNS server access for name resolution, please check that the settings for your smb.conf file results in dns proxy = no. The -best way to check this is with testparm smb.conf. -

    +best way to check this is with testparm smb.conf. +

    + It is helpful to monitor the log files during testing by using the -tail -F log_file_name in a separate +tail -F log_file_name in a separate terminal console (use ctrl-alt-F1 through F6 or multiple terminals in X). Relevant log files can be found (for default installations) in -/usr/local/samba/var. Also, connection logs from -machines can be found here or possibly in /var/log/samba +/usr/local/samba/var. Also, connection logs from +machines can be found here or possibly in /var/log/samba, depending on how or if you specified logging in your smb.conf file.

    If you make changes to your smb.conf file while going through these test, -don't forget to restart smbd and nmbd. -

    The tests

    Procedure 33.1. Diagnosing your samba server

    1. +remember to restart smbd and nmbd. +

    The Tests

    Procedure 33.1. Diagnosing your Samba server

    1. + In the directory in which you store your smb.conf file, run the command -testparm smb.conf. If it reports any errors then your smb.conf +testparm smb.conf. If it reports any errors, then your smb.conf configuration file is faulty.

      Note

      Your smb.conf file may be located in: /etc/samba -Or in: /usr/local/samba/lib +or in /usr/local/samba/lib.

    2. -Run the command ping BIGSERVER from the PC and -ping ACLIENT from -the unix box. If you don't get a valid response then your TCP/IP -software is not correctly installed. +Run the command ping BIGSERVER from the PC and +ping ACLIENT from the UNIX box. If you do not get a valid response, +then your TCP/IP software is not correctly installed.

      -Note that you will need to start a "dos prompt" window on the PC to -run ping. +You will need to start a “dos prompt” window on the PC to run ping.

      -If you get a message saying host not found or similar then your DNS +If you get a message saying “host not found” or similar, then your DNS software or /etc/hosts file is not correctly setup. -It is possible to -run samba without DNS entries for the server and client, but I assume +It is possible to run Samba without DNS entries for the server and client, but it is assumed you do have correct entries for the remainder of these tests.

      Another reason why ping might fail is if your host is running firewall software. You will need to relax the rules to let in the workstation in question, perhaps by allowing access from another subnet (on Linux -this is done via the ipfwadm program.) +this is done via the appropriate firewall maintenance commands ipchains +or iptables).

      Note

      Modern Linux distributions install ipchains/iptables by default. This is a common problem that is often overlooked. -

    3. -Run the command smbclient -L BIGSERVER on the unix box. You -should get a list of available shares back. -

      -If you get a error message containing the string "Bad password" then -you probably have either an incorrect hosts allow, -hosts deny or valid users line in your -smb.conf, or your guest account is not -valid. Check what your guest account is using testparm and -temporarily remove any hosts allow, hosts deny, valid users or invalid users lines. -

      -If you get a connection refused response then the smbd server may -not be running. If you installed it in inetd.conf then you probably edited -that file incorrectly. If you installed it as a daemon then check that +

    +If you wish to check what firewall rules may be present in a system under test, simply run +iptables -L -v or if ipchains-based firewall rules are in use, +ipchains -L -v. +

    +Here is a sample listing from a system that has an external ethernet interface (eth1) on which Samba +is not active, and an internal (private network) interface (eth0) on which Samba is active: +

    +frodo:~ # iptables -L -v
    +Chain INPUT (policy DROP 98496 packets, 12M bytes)
    + pkts bytes target     prot opt in     out     source     destination
    + 187K  109M ACCEPT     all  --  lo     any     anywhere   anywhere
    + 892K  125M ACCEPT     all  --  eth0   any     anywhere   anywhere
    +1399K 1380M ACCEPT     all  --  eth1   any     anywhere   anywhere  \
    +					state RELATED,ESTABLISHED
    +
    +Chain FORWARD (policy DROP 0 packets, 0 bytes)
    + pkts bytes target     prot opt in     out     source     destination
    + 978K 1177M ACCEPT     all  --  eth1   eth0    anywhere   anywhere \
    +					state RELATED,ESTABLISHED
    + 658K   40M ACCEPT     all  --  eth0   eth1    anywhere   anywhere
    +    0     0 LOG        all  --  any    any     anywhere   anywhere \
    +					LOG level warning
    +
    +Chain OUTPUT (policy ACCEPT 2875K packets, 1508M bytes)
    + pkts bytes target     prot opt in     out     source     destination
    +
    +Chain reject_func (0 references)
    + pkts bytes target     prot opt in     out     source     destinat
    +

    +

  • +Run the command: smbclient -L BIGSERVER +on the UNIX box. You should get back a list of available shares. +

    +If you get an error message containing the string “Bad password”, then +you probably have either an incorrect hosts allow, +hosts deny or valid users line in your +smb.conf, or your guest account is not valid. Check what your guest account is using testparm and +temporarily remove any hosts allow, hosts deny, +valid users or invalid users lines. +

    +If you get a message “connection refused” response, then the smbd server may +not be running. If you installed it in inetd.conf, then you probably edited +that file incorrectly. If you installed it as a daemon, then check that it is running, and check that the netbios-ssn port is in a LISTEN -state using netstat -a. +state using netstat -a.

    Note

    - - -Some Unix / Linux systems use xinetd in place of + + +Some UNIX/Linux systems use xinetd in place of inetd. Check your system documentation for the location -of the control file/s for your particular system implementation of -this network super daemon. +of the control files for your particular system implementation of +the network super daemon.

    -If you get a session request failed then the server refused the -connection. If it says "Your server software is being unfriendly" then -its probably because you have invalid command line parameters to smbd, +If you get a message saying “session request failed”, the server refused the +connection. If it says “Your server software is being unfriendly”, then +it's probably because you have invalid command line parameters to smbd, or a similar fatal problem with the initial startup of smbd. Also check your config file (smb.conf) for syntax errors with testparm -and that the various directories where samba keeps its log and lock +and that the various directories where Samba keeps its log and lock files exist.

    There are a number of reasons for which smbd may refuse or decline a session request. The most common of these involve one or more of -the following smb.conf file entries: -

    hosts deny = ALL
    hosts allow = xxx.xxx.xxx.xxx/yy
    bind interfaces only = Yes

    +the smb.conf file entries as shown in . +

    +

    Example 33.2. Configuration for only allowing connections from a certain subnet

    [globals]
    ...
    hosts deny = ALL
    hosts allow = xxx.xxx.xxx.xxx/yy
    interfaces = eth0
    bind interfaces only = Yes
    ...

    +

    In the above, no allowance has been made for any session requests that will automatically translate to the loopback adapter address 127.0.0.1. -To solve this problem change these lines to: -

    hosts deny = ALL
    hosts allow = xxx.xxx.xxx.xxx/yy 127.

    -Do not use the bind interfaces only parameter where you -may wish to -use the samba password change facility, or where smbclient may need to -access a local service for name resolution or for local resource -connections. (Note: the bind interfaces only parameter deficiency -where it will not allow connections to the loopback address will be -fixed soon). -

    - +To solve this problem, change these lines as shown in . +

    +

    Example 33.3. Configuration for allowing connections from a certain subnet and localhost

    [globals]
    ...
    hosts deny = ALL
    hosts allow = xxx.xxx.xxx.xxx/yy 127.
    interfaces = eth0 lo
    ...

    +

    + Another common cause of these two errors is having something already running -on port 139, such as Samba -(ie: smbd is running from inetd already) or + +on port 139, such as Samba (smbd is running from inetd already) or something like Digital's Pathworks. Check your inetd.conf file before trying -to start smbd as a daemon, it can avoid a lot of frustration! +to start smbd as a daemon it can avoid a lot of frustration!

    And yet another possible cause for failure of this test is when the subnet mask -and / or broadcast address settings are incorrect. Please check that the -network interface IP Address / Broadcast Address / Subnet Mask settings are +and/or broadcast address settings are incorrect. Please check that the +network interface IP Address/Broadcast Address/Subnet Mask settings are correct and that Samba has correctly noted these in the log.nmbd file.

  • -Run the command nmblookup -B BIGSERVER __SAMBA__. You should get the -IP address of your Samba server back. +Run the command: nmblookup -B BIGSERVER __SAMBA__. +You should get back the IP address of your Samba server.

    -If you don't then nmbd is incorrectly installed. Check your inetd.conf -if you run it from there, or that the daemon is running and listening -to udp port 137. +If you do not, then nmbd is incorrectly installed. Check your inetd.conf +if you run it from there, or that the daemon is running and listening to udp port 137.

    One common problem is that many inetd implementations can't take many -parameters on the command line. If this is the case then create a +parameters on the command line. If this is the case, then create a one-line script that contains the right parameters and run that from inetd. -

  • run the command nmblookup -B ACLIENT '*'

    -You should get the PCs IP address back. If you don't then the client +

  • +Run the command: nmblookup -B ACLIENT `*' +

    +You should get the PC's IP address back. If you do not then the client software on the PC isn't installed correctly, or isn't started, or you got the name of the PC wrong.

    -If ACLIENT doesn't resolve via DNS then use the IP address of the +If ACLIENT does not resolve via DNS then use the IP address of the client in the above test.

  • -Run the command nmblookup -d 2 '*' +Run the command: nmblookup -d 2 '*'

    This time we are trying the same as the previous test but are trying it via a broadcast to the default broadcast address. A number of -NetBIOS / TCP/IP hosts on the network should respond, although Samba may +NetBIOS/TCP/IP hosts on the network should respond, although Samba may not catch all of the responses in the short time it listens. You -should see got a positive name query response +should see the “got a positive name query response” messages from several hosts.

    -If this doesn't give a similar result to the previous test then +If this does not give a similar result to the previous test, then nmblookup isn't correctly getting your broadcast address through its automatic mechanism. In this case you should experiment with the -interfaces option in smb.conf to manually configure your IP +interfaces option in smb.conf to manually configure your IP address, broadcast and netmask.

    -If your PC and server aren't on the same subnet then you will need to -use the -B option to set the broadcast address to that of the PCs -subnet. +If your PC and server aren't on the same subnet, then you will need to use the +-B option to set the broadcast address to that of the PCs subnet.

    This test will probably fail if your subnet mask and broadcast address are not correct. (Refer to TEST 3 notes above). -

  • -Run the command smbclient //BIGSERVER/TMP. You should +

  • + +Run the command: smbclient //BIGSERVER/TMP. You should then be prompted for a password. You should use the password of the account -you are logged into the unix box with. If you want to test with -another account then add the -U accountname option to the end of -the command line. eg: -smbclient //bigserver/tmp -Ujohndoe +with which you are logged into the UNIX box. If you want to test with +another account, then add the -U accountname option to the end of +the command line. For example, smbclient //bigserver/tmp -Ujohndoe.

    Note

    -It is possible to specify the password along with the username -as follows: -smbclient //bigserver/tmp -Ujohndoe%secret +It is possible to specify the password along with the username as follows: +smbclient //bigserver/tmp -Ujohndoe%secret.

    -Once you enter the password you should get the smb> prompt. If you -don't then look at the error message. If it says invalid network -name then the service "tmp" is not correctly setup in your smb.conf. +Once you enter the password, you should get the smb> prompt. If you +do not, then look at the error message. If it says “invalid network +name”, then the service tmp is not correctly setup in your smb.conf.

    -If it says bad password then the likely causes are: +If it says “bad password”, then the likely causes are:

    1. - you have shadow passwords (or some other password system) but didn't - compile in support for them in smbd + You have shadow passwords (or some other password system) but didn't + compile in support for them in smbd.

    2. - your valid users configuration is incorrect + Your valid users configuration is incorrect.

    3. - you have a mixed case password and you haven't enabled the password level option at a high enough level + You have a mixed case password and you haven't enabled the password level option at a high enough level.

    4. - the path line in smb.conf is incorrect. Check it with testparm + The path line in smb.conf is incorrect. Check it with testparm.

    5. - you enabled password encryption but didn't map unix to samba users. Run

      smbpasswd -a username

      . + You enabled password encryption but didn't map UNIX to Samba users. Run: + smbpasswd -a username

    -Once connected you should be able to use the commands -dir get put etc. -Type help command for instructions. You should -especially check that the amount of free disk space shown is correct -when you type dir. +Once connected, you should be able to use the commands dir, get, +put and so on. Type help command for instructions. You should +especially check that the amount of free disk space shown is correct when you type dir.

  • -On the PC, type the command net view \\BIGSERVER. You will -need to do this from within a "dos prompt" window. You should get back a -list of available shares on the server. -

    -If you get a network name not found or similar error then netbios -name resolution is not working. This is usually caused by a problem in -nmbd. To overcome it you could do one of the following (you only need -to choose one of them): +On the PC, type the command net view \\BIGSERVER. You will +need to do this from within a dos prompt window. You should get back a +list of shares available on the server. +

    +If you get a message “network name not found” or similar error, then netbios +name resolution is not working. This is usually caused by a problem in nmbd. +To overcome it, you could do one of the following (you only need to choose one of them):

    1. - fixup the nmbd installation + Fixup the nmbd installation.

    2. - add the IP address of BIGSERVER to the wins server box in the + Add the IP address of BIGSERVER to the wins server box in the advanced TCP/IP setup on the PC.

    3. - enable windows name resolution via DNS in the advanced section of - the TCP/IP setup + Enable Windows name resolution via DNS in the advanced section of the TCP/IP setup.

    4. - add BIGSERVER to your lmhosts file on the PC. + Add BIGSERVER to your lmhosts file on the PC.

    -If you get a invalid network name or bad password error then the -same fixes apply as they did for the smbclient -L test above. In -particular, make sure your hosts allow line is correct (see the man -pages) +If you get a message “invalid network name” or +“bad password error”, then apply the +same fixes as for the smbclient -L test above. In +particular, make sure your hosts allow line is correct (see the man pages).

    Also, do not overlook that fact that when the workstation requests the -connection to the samba server it will attempt to connect using the +connection to the Samba server, it will attempt to connect using the name with which you logged onto your Windows machine. You need to make sure that an account exists on your Samba server with that exact same name and password.

    -If you get specified computer is not receiving requests or similar -it probably means that the host is not contactable via tcp services. -Check to see if the host is running tcp wrappers, and if so add an entry in -the hosts.allow file for your client (or subnet, etc.) +If you get a message “specified computer is not receiving requests” or similar, +it probably means that the host is not contactable via TCP services. +Check to see if the host is running TCP wrappers, and if so add an entry in +the hosts.allow file for your client (or subnet, and so on.)

  • -Run the command net use x: \\BIGSERVER\TMP. You should -be prompted for a password then you should get a command completed -successfully message. If not then your PC software is incorrectly -installed or your smb.conf is incorrect. make sure your hosts allow +Run the command net use x: \\BIGSERVER\TMP. You should +be prompted for a password, then you should get a command completed +successfully message. If not, then your PC software is incorrectly +installed or your smb.conf is incorrect. Make sure your hosts allow and other config lines in smb.conf are correct.

    -It's also possible that the server can't work out what user name to -connect you as. To see if this is the problem add the line user = username to the [tmp] section of -smb.conf where username is the +It's also possible that the server can't work out what user name to connect you as. +To see if this is the problem, add the line +user = username to the +[tmp] section of +smb.conf where username is the username corresponding to the password you typed. If you find this -fixes things you may need the username mapping option. +fixes things, you may need the username mapping option.

    It might also be the case that your client only sends encrypted passwords -and you have encrypt passwords = no in smb.conf -Turn it back on to fix. +and you have encrypt passwords = no in smb.conf. +Change this to "yes" to fix this.

  • -Run the command nmblookup -M testgroup where -testgroup is the name of the workgroup that your Samba server and +Run the command nmblookup -M testgroup where +testgroup is the name of the workgroup that your Samba server and Windows PCs belong to. You should get back the IP address of the master browser for that workgroup.

    -If you don't then the election process has failed. Wait a minute to -see if it is just being slow then try again. If it still fails after -that then look at the browsing options you have set in smb.conf. Make -sure you have preferred master = yes to ensure that +If you do not, then the election process has failed. Wait a minute to +see if it is just being slow, then try again. If it still fails after +that, then look at the browsing options you have set in smb.conf. Make +sure you have preferred master = yes to ensure that an election is held at startup.

  • -From file manager try to browse the server. Your samba server should +>From file manager, try to browse the server. Your Samba server should appear in the browse list of your local workgroup (or the one you specified in smb.conf). You should be able to double click on the name -of the server and get a list of shares. If you get a "invalid -password" error when you do then you are probably running WinNT and it +of the server and get a list of shares. If you get the error message “invalid password”, + you are probably running Windows NT and it is refusing to browse a server that has no encrypted password -capability and is in user level security mode. In this case either set -security = server AND -password server = Windows_NT_Machine in your -smb.conf file, or make sure encrypt passwords is -set to "yes". -

  • Chapter 34. Analysing and solving samba problems

    Gerald (Jerry) Carter

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    David Bannon

    Samba Team

    8 Apr 2003

    +capability and is in User Level Security mode. In this case, either set +security = server and +password server = Windows_NT_Machine in your +smb.conf file, or make sure encrypt passwords is +set to “yes”. +

    Chapter 34. Analyzing and Solving Samba Problems

    Gerald (Jerry) Carter

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    David Bannon

    Samba Team

    Dan Shearer

    Samba Team

    8 Apr 2003

    There are many sources of information available in the form -of mailing lists, RFC's and documentation. The docs that come -with the samba distribution contain very good explanations of -general SMB topics such as browsing.

    Diagnostics tools

    With SMB networking, it is often not immediately clear what +of mailing lists, RFCs and documentation. The documentation that comes +with the Samba distribution contains good explanations of +general SMB topics such as browsing.

    Diagnostics Tools

    With SMB networking, it is often not immediately clear what the cause is of a certain problem. Samba itself provides rather useful information, but in some cases you might have to fall back to using a sniffer. A sniffer is a program that -listens on your LAN, analyses the data sent on it and displays it -on the screen.

    Debugging with Samba itself

    -One of the best diagnostic tools for debugging problems is Samba itself. -You can use the -d option for both smbd and nmbd to specify what -debug level at which to run. See the man pages on smbd, nmbd and -smb.conf for more information on debugging options. The debug +listens on your LAN, analyzes the data sent on it and displays it +on the screen.

    Debugging with Samba Itself

    +One of the best diagnostic tools for debugging problems is Samba itself. +You can use the -d option for both smbd and nmbd to specify the +debug level at which to run. +See the man pages for smbd, nmbd and +smb.conf for more information regarding debugging options. The debug level can range from 1 (the default) to 10 (100 for debugging passwords).

    -Another helpful method of debugging is to compile samba using the -gcc -g flag. This will include debug -information in the binaries and allow you to attach gdb to the -running smbd / nmbd process. In order to attach gdb to an smbd +Another helpful method of debugging is to compile Samba using the +gcc -g flag. This will include debug information in the binaries and +allow you to attach gdb to the running smbd/nmbd process. +To attach gdb to an smbd process for an NT workstation, first get the workstation to make the connection. Pressing ctrl-alt-delete and going down to the domain box -is sufficient (at least, on the first time you join the domain) to -generate a 'LsaEnumTrustedDomains'. Thereafter, the workstation -maintains an open connection, and therefore there will be an smbd +is sufficient (at least, the first time you join the domain) to +generate a LsaEnumTrustedDomains. Thereafter, the workstation +maintains an open connection and there will be an smbd process running (assuming that you haven't set a really short smbd -idle timeout) So, in between pressing ctrl alt delete, and actually -typing in your password, you can attach gdb and continue. +idle timeout). So, in between pressing ctrl-alt-delete and actually +typing in your password, you can attach gdb and continue.

    -Some useful samba commands worth investigating: +Some useful Samba commands worth investigating are:

     $ testparm | more
     $ smbclient -L //{netbios name of server}
    -

    Tcpdump

    Tcpdump was the first -unix sniffer with SMB support. It is a command-line utility and -nowadays, it's SMB support is somewhat less then that of ethereal -and tethereal.

    Ethereal

    -Ethereal is a graphical -sniffer, available for both unix (Gtk) and Windows. Ethereal's -SMB support is very good.

    For details on the use of ethereal, read the well-written -ethereal User Guide.

    -Listen for data on ports 137, 138, 139 and 445. E.g. -use the filter port 137 or port 138 or port 139 or port 445.

    A console version of ethereal is available as well and is called -tethereal.

    The Windows Network Monitor

    -For tracing things on the Microsoft Windows NT, Network Monitor -(aka. netmon) is available on the Microsoft Developer Network CD's, -the Windows NT Server install CD and the SMS CD's. The version of -netmon that ships with SMS allows for dumping packets between any two -computers (i.e. placing the network interface in promiscuous mode). +

    Tcpdump

    +Tcpdump was the first +UNIX sniffer with SMB support. It is a command-line utility and +now, its SMB support is somewhat lagging that of ethereal +and tethereal. +

    Ethereal

    +Ethereal is a graphical +sniffer, available for both UNIX (Gtk) and Windows. Ethereal's +SMB support is quite good.

    For details on the use of ethereal, read the well-written +Ethereal User Guide.

    Figure 34.1. Starting a capture.

    Starting a capture.

    +Listen for data on ports 137, 138, 139, and 445. For example, use the filter port 137, port 138, port 139, or port 445 as seen in .

    A console version of ethereal is available as well and is called +tethereal.

    Figure 34.2. Main ethereal data window.

    Main ethereal data window.

    The Windows Network Monitor

    +For tracing things on Microsoft Windows NT, Network Monitor +(aka Netmon) is available on Microsoft Developer Network CDs, +the Windows NT Server install CD and the SMS CDs. The version of +Netmon that ships with SMS allows for dumping packets between any two +computers (i.e., placing the network interface in promiscuous mode). The version on the NT Server install CD will only allow monitoring of network traffic directed to the local NT box and broadcasts on the -local subnet. Be aware that Ethereal can read and write netmon +local subnet. Be aware that Ethereal can read and write Netmon formatted files. -

    Installing 'Network Monitor' on an NT Workstation

    -Installing netmon on an NT workstation requires a couple -of steps. The following are for installing Netmon V4.00.349, which comes +

    Installing Network Monitor on an NT Workstation

    +Installing Netmon on an NT workstation requires a couple +of steps. The following are instructions for installing Netmon V4.00.349, which comes with Microsoft Windows NT Server 4.0, on Microsoft Windows NT -Workstation 4.0. The process should be similar for other versions of -Windows NT / Netmon. You will need both the Microsoft Windows +Workstation 4.0. The process should be similar for other versions of +Windows NT version of Netmon. You will need both the Microsoft Windows NT Server 4.0 Install CD and the Workstation 4.0 Install CD.

    Initially you will need to install Network Monitor Tools and Agent -on the NT Server. To do this -

    • Goto Start - Settings - Control Panel - - Network - Services - Add

    • Select the Network Monitor Tools and Agent and - click on OK.

    • Click OK on the Network Control Panel. -

    • Insert the Windows NT Server 4.0 install CD - when prompted.

    -At this point the Netmon files should exist in -%SYSTEMROOT%\System32\netmon\*.*. -Two subdirectories exist as well, parsers\ -which contains the necessary DLL's for parsing the netmon packet -dump, and captures\. -

    -In order to install the Netmon tools on an NT Workstation, you will -first need to install the 'Network Monitor Agent' from the Workstation -install CD. -

    • Goto Start - Settings - Control Panel - - Network - Services - Add

    • Select the Network Monitor Agent and click - on OK.

    • Click OK on the Network Control Panel. -

    • Insert the Windows NT Workstation 4.0 install - CD when prompted.

    -Now copy the files from the NT Server in %SYSTEMROOT%\System32\netmon\*.* -to %SYSTEMROOT%\System32\netmon\*.* on the Workstation and set -permissions as you deem appropriate for your site. You will need -administrative rights on the NT box to run netmon. -

    Installing 'Network Monitor' on an 9x Workstation

    -To install Netmon on a Windows 9x box install the network monitor agent -from the Windows 9x CD (\admin\nettools\netmon). There is a readme -file located with the netmon driver files on the CD if you need -information on how to do this. Copy the files from a working -Netmon installation. -

    Useful URLs

    Getting help from the mailing lists

    -There are a number of Samba related mailing lists. Go to http://samba.org, click on your nearest mirror -and then click on Support and then click on -Samba related mailing lists. -

    -For questions relating to Samba TNG go to -http://www.samba-tng.org/ -It has been requested that you don't post questions about Samba-TNG to the -main stream Samba lists.

    -If you post a message to one of the lists please observe the following guide lines : -

    • Always remember that the developers are volunteers, they are -not paid and they never guarantee to produce a particular feature at -a particular time. Any time lines are 'best guess' and nothing more. -

    • Always mention what version of samba you are using and what -operating system its running under. You should probably list the -relevant sections of your smb.conf file, at least the options -in [global] that affect PDC support.

    • In addition to the version, if you obtained Samba via -CVS mention the date when you last checked it out.

    • Try and make your question clear and brief, lots of long, -convoluted questions get deleted before they are completely read ! -Don't post html encoded messages (if you can select colour or font -size its html).

    • If you run one of those nifty 'I'm on holidays' things when -you are away, make sure its configured to not answer mailing lists. -

    • Don't cross post. Work out which is the best list to post to -and see what happens, i.e. don't post to both samba-ntdom and samba-technical. -Many people active on the lists subscribe to more -than one list and get annoyed to see the same message two or more times. -Often someone will see a message and thinking it would be better dealt -with on another, will forward it on for you.

    • You might include partial -log files written at a debug level set to as much as 20. -Please don't send the entire log but enough to give the context of the -error messages.

    • (Possibly) If you have a complete netmon trace ( from the opening of -the pipe to the error ) you can send the *.CAP file as well.

    • Please think carefully before attaching a document to an email. -Consider pasting the relevant parts into the body of the message. The samba -mailing lists go to a huge number of people, do they all need a copy of your -smb.conf in their attach directory?

    How to get off the mailing lists

    To have your name removed from a samba mailing list, go to the -same place you went to to get on it. Go to http://lists.samba.org, -click on your nearest mirror and then click on Support and -then click on Samba related mailing lists. -

    -Please don't post messages to the list asking to be removed, you will just -be referred to the above address (unless that process failed in some way...) -

    Chapter 35. Reporting Bugs

    Jelmer R. Vernooij

    The Samba Team

    Andrew Tridgell

    Samba Team

    27 June 1997

    Introduction

    Please report bugs using - bugzilla.

    -Please take the time to read this file before you submit a bug -report. Also, please see if it has changed between releases, as we -may be changing the bug reporting mechanism at some time. -

    -Please also do as much as you can yourself to help track down the +on the NT Server to do this: +

    • Go to Start -> Settings -> Control Panel -> + Network -> Services -> Add.

    • Select the Network Monitor Tools and Agent and click on OK.

    • Click on OK on the Network Control Panel.

    • Insert the Windows NT Server 4.0 install CD when prompted.

    +At this point, the Netmon files should exist in %SYSTEMROOT%\System32\netmon\*.*. +Two subdirectories exist as well, parsers\ which contains the necessary DLLs +for parsing the Netmon packet dump, and captures\. +

    +To install the Netmon tools on an NT Workstation, you will first need to install the +Network Monitor Agent from the Workstation install CD. +

    • Go to Start -> Settings -> Control Panel -> + Network -> Services -> Add.

    • Select the Network Monitor Agent, click on OK.

    • Click on OK in the Network Control Panel. +

    • Insert the Windows NT Workstation 4.0 install CD when prompted.

    +Now copy the files from the NT Server in %SYSTEMROOT%\System32\netmon +to %SYSTEMROOT%\System32\netmon on the Workstation and set permissions +as you deem appropriate for your site. You will need administrative rights on the NT box to run Netmon. +

    Installing Network Monitor on Windows 9x/Me

    +To install Netmon on Windows 9x/Me, install the Network Monitor Agent +from the Windows 9x/Me CD (\admin\nettools\netmon). +There is a readme file located with the Netmon driver files on the CD if you need +information on how to do this. Copy the files from a working Netmon installation. +

    Useful URLs

    • See how Scott Merrill simulates a BDC behavior at + + http://www.skippy.net/linux/smb-howto.html.

    • FTP site for older SMB specs: + + ftp://ftp.microsoft.com/developr/drg/CIFS/

    Getting Mailing List Help

    +There are a number of Samba-related mailing lists. Go to http://samba.org, click on your nearest mirror +and then click on Support and next click on +Samba-related mailing lists. +

    +For questions relating to Samba TNG, go to +http://www.samba-tng.org/. +It has been requested that you do not post questions about Samba-TNG to the +main-stream Samba lists.

    +If you do post a message to one of the lists, please observe the following guidelines : +

    • Always remember that the developers are volunteers, they are + not paid and they never guarantee to produce a particular feature at + a particular time. Any timelines are “best guess” and nothing more. +

    • Always mention what version of Samba you are using and what + operating system it's running under. You should list the relevant sections of + your smb.conf file, at least the options in [global] + that affect PDC support. +

    • In addition to the version, if you obtained Samba via + CVS, mention the date when you last checked it out.

    • Try and make your questions clear and brief. Lots of long, + convoluted questions get deleted before they are completely read! + Do not post HTML encoded messages. Most people on mailing lists simply delete + them. +

    • If you run one of those nifty “I'm on holidays” things when + you are away, make sure its configured to not answer mailing list traffic. Auto-responses + to mailing lists really irritate the thousands of people who end up having to deal + with such bad netiquet bahavior. +

    • Don't cross post. Work out which is the best list to post to + and see what happens. Do not post to both samba-ntdom and samba-technical. + Many people active on the lists subscribe to more + than one list and get annoyed to see the same message two or more times. + Often someone will see a message and thinking it would be better dealt + with on another list, will forward it on for you.

    • You might include partial + log files written at a debug level set to as much as 20. + Please do not send the entire log but just enough to give the context of the + error messages.

    • If you have a complete Netmon trace (from the opening of + the pipe to the error), you can send the *.CAP file as well.

    • Please think carefully before attaching a document to an email. + Consider pasting the relevant parts into the body of the message. The Samba + mailing lists go to a huge number of people. Do they all need a copy of your + smb.conf in their attach directory?

    How to Get Off the Mailing Lists

    To have your name removed from a Samba mailing list, go to the same +place where you went to +subscribe to it. Go to http://lists.samba.org, +click on your nearest mirror, click on Support and +then click on Samba related mailing lists. +

    +Please do not post messages to the list asking to be removed. You will only +be referred to the above address (unless that process failed in some way). +

    Chapter 35. Reporting Bugs

    John H. Terpstra

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    Andrew Tridgell

    Samba Team

    27 June 1997

    Introduction

    Please report bugs using Samba's +Bugzilla facilities and +take the time to read this file before you submit a bug +report. Also, check to see if it has changed between releases, as we +may be changing the bug reporting mechanism at some point. +

    +Please do as much as you can yourself to help track down the bug. Samba is maintained by a dedicated group of people who volunteer -their time, skills and efforts. We receive far more mail about it than -we can possibly answer, so you have a much higher chance of an answer -and a fix if you send us a "developer friendly" bug report that lets +their time, skills and efforts. We receive far more mail than +we can possibly answer, so you have a much higher chance of a response +and a fix if you send us a “developer friendly” bug report that lets us fix it fast.

    Do not assume that if you post the bug to the comp.protocols.smb newsgroup or the mailing list that we will read it. If you suspect that your -problem is not a bug but a configuration problem then it is better to send -it to the Samba mailing list, as there are (at last count) 5000 other users on -that list that may be able to help you. +problem is not a bug but a configuration problem, it is better to send +it to the Samba mailing list, as there are thousands of other users on +that list who may be able to help you.

    You may also like to look though the recent mailing list archives, -which are conveniently accessible on the Samba web pages -at http://samba.org/samba/. -

    General info

    -Before submitting a bug report check your config for silly -errors. Look in your log files for obvious messages that tell you that -you've misconfigured something and run testparm to test your config +which are conveniently accessible on the Samba Web pages +at http://samba.org/samba/. +

    General Information

    +Before submitting a bug report, check your config for silly +errors. Look in your log files for obvious messages that tell +you've misconfigured something. Run testparm to check your config file for correct syntax.

    -Have you run through the diagnosis? -This is very important. + Have you looked through ? This is extremely important.

    -If you include part of a log file with your bug report then be sure to +If you include part of a log file with your bug report, then be sure to annotate it with exactly what you were doing on the client at the -time, and exactly what the results were. -

    Debug levels

    +time and exactly what the results were. +

    Debug Levels

    If the bug has anything to do with Samba behaving incorrectly as a -server (like refusing to open a file) then the log files will probably -be very useful. Depending on the problem a log level of between 3 and +server (like refusing to open a file), then the log files will probably +be quite useful. Depending on the problem, a log level of between 3 and 10 showing the problem may be appropriate. A higher level gives more detail, but may use too much disk space.

    -To set the debug level use the log level in your +To set the debug level, use the log level in your smb.conf. You may also find it useful to set the log level higher for just one machine and keep separate logs for each machine. -To do this add the following lines to your main smb.conf file: +To do this, add the following lines to your main smb.conf file:

    log level = 10
    log file = /usr/local/samba/lib/log.%m
    include = /usr/local/samba/lib/smb.conf.%m

    -then create a file -/usr/local/samba/lib/smb.conf.machine where +and create a file /usr/local/samba/lib/smb.conf.machine where machine is the name of the client you wish to debug. In that file put any smb.conf commands you want, for example -log level may be useful. This also allows you to -experiment with different security systems, protocol levels etc on just +log level may be useful. This also allows you to +experiment with different security systems, protocol levels and so on, on just one machine.

    -The smb.conf entry log level -is synonymous with the parameter debuglevel that has -been used in older versions of Samba and is being retained for backwards +The smb.conf entry log level +is synonymous with the parameter debuglevel that has +been used in older versions of Samba and is being retained for backward compatibility of smb.conf files.

    -As the log level value is increased you will record -a significantly increasing level of debugging information. For most -debugging operations you may not need a setting higher than +As the log level value is increased, you will record +a significantly greater level of debugging information. For most +debugging operations, you may not need a setting higher than 3. Nearly all bugs can be tracked at a setting of 10, but be -prepared for a VERY large volume of log data. -

    Internal errors

    -If you get a INTERNAL ERROR message in your log files +prepared for a large volume of log data. +

    Internal Errors

    +If you get the message “INTERNAL ERROR” in your log files, it means that Samba got an unexpected signal while running. It is probably a segmentation fault and almost certainly means a bug in Samba (unless you have faulty hardware or system software).

    -If the message came from smbd then it will probably be accompanied by -a message which details the last SMB message received by smbd. This -info is often very useful in tracking down the problem so please +If the message came from smbd, it will probably be accompanied by +a message that details the last SMB message received by smbd. This +information is often useful in tracking down the problem so please include it in your bug report.

    You should also detail how to reproduce the problem, if possible. Please make this reasonably detailed. -

    +

    + You may also find that a core file appeared in a corefiles -subdirectory of the directory where you keep your samba log +subdirectory of the directory where you keep your Samba log files. This file is the most useful tool for tracking down the bug. To -use it you do this: -

    +use it, you do this:
    +
    +
    +

     $ gdb smbd core
     

    adding appropriate paths to smbd and core so gdb can find them. If you -don't have gdb then try dbx. Then within the debugger +do not have gdb, try dbx. Then within the debugger, use the command where to give a stack trace of where the problem occurred. Include this in your report.

    -If you know any assembly language then do a -disass of the routine -where the problem occurred (if its in a library routine then +If you know any assembly language, do a disass of the routine +where the problem occurred (if its in a library routine, then disassemble the routine that called it) and try to work out exactly where the problem is by looking at the surrounding code. Even if you -don't know assembly, including this info in the bug report can be +do not know assembly, including this information in the bug report can be useful. -

    Attaching to a running process

    -Unfortunately some unixes (in particular some recent linux kernels) +

    Attaching to a Running Process

    +Unfortunately, some UNIXes (in particular some recent Linux kernels) refuse to dump a core file if the task has changed uid (which smbd -does often). To debug with this sort of system you could try to attach +does often). To debug with this sort of system, you could try to attach to the running process using gdb smbd PID where you get PID from smbstatus. Then use c to continue and try to cause the core dump using the client. The debugger should catch the fault and tell you where it occurred. -

    Patches

    +

    Patches

    + + The best sort of bug report is one that includes a fix! If you send us -patches please use diff -u format if your version of +patches, please use diff -u format if your version of diff supports it, otherwise use diff -c4. Make sure you do the diff against a clean version of the source and let me know exactly what version you used. -

    Appendixes

    Chapter 36. How to compile Samba

    Jelmer R. Vernooij

    The Samba Team

    Andrew Tridgell

    Samba Team

    22 May 2001

    18 March 2003

    -You can obtain the samba source from the -samba website. To obtain a development version, -you can download samba from CVS or using rsync. -

    Access Samba source code via CVS

    Introduction

    -Samba is developed in an open environment. Developers use CVS -(Concurrent Versioning System) to "checkin" (also known as -"commit") new source code. Samba's various CVS branches can +

    Appendixes

    Chapter 36. How to Compile Samba

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Andrew Tridgell

    Samba Team

    22 May 2001

    18 March 2003

    +You can obtain the Samba source from the +Samba Website. To obtain a development version, +you can download Samba from CVS or using rsync. +

    Access Samba Source Code via CVS

    Introduction

    + +Samba is developed in an open environment. Developers use +Concurrent Versioning System (CVS) to “checkin” (also known as +“commit”) new source code. Samba's various CVS branches can be accessed via anonymous CVS using the instructions detailed in this chapter.

    This chapter is a modified version of the instructions found at -http://samba.org/samba/cvs.html -

    CVS Access to samba.org

    +http://samba.org/samba/cvs.html +

    CVS Access to samba.org

    The machine samba.org runs a publicly accessible CVS repository for access to the source code of several packages, -including samba, rsync, distcc, ccache and jitterbug. There are two main ways -of accessing the CVS server on this host. -

    Access via CVSweb

    -You can access the source code via your -favourite WWW browser. This allows you to access the contents of -individual files in the repository and also to look at the revision +including Samba, rsync, distcc, ccache, and jitterbug. There are two main ways +of accessing the CVS server on this host: +

    Access via CVSweb

    + +You can access the source code via your favorite WWW browser. This allows you to access +the contents of individual files in the repository and also to look at the revision history and commit logs of individual files. You can also ask for a diff listing between any two versions on the repository.

    -Use the URL : http://samba.org/cgi-bin/cvsweb -

    Access via cvs

    +Use the URL: +http://samba.org/cgi-bin/CVSweb +

    Access via CVS

    You can also access the source code via a -normal cvs client. This gives you much more control over what you can +normal CVS client. This gives you much more control over what you can do with the repository and allows you to checkout whole source trees -and keep them up to date via normal cvs commands. This is the +and keep them up-to-date via normal CVS commands. This is the preferred method of access if you are a developer and not just a casual browser.

    -To download the latest cvs source code, point your +To download the latest CVS source code, point your browser at the URL : -http://www.cyclic.com/. -and click on the 'How to get cvs' link. CVS is free software under -the GNU GPL (as is Samba). Note that there are several graphical CVS clients -which provide a graphical interface to the sometimes mundane CVS commands. -Links to theses clients are also available from the Cyclic website. +http://www.cyclic.com/. +and click on the “How to get CVS” link. CVS is free software under +the GNU GPL (as is Samba). Note that there are several graphical CVS clients +that provide a graphical interface to the sometimes mundane CVS commands. +Links to theses clients are also available from the Cyclic Web site.

    -To gain access via anonymous cvs use the following steps. +To gain access via anonymous CVS, use the following steps. For this example it is assumed that you want a copy of the -samba source code. For the other source code repositories -on this system just substitute the correct package name -

    Procedure 36.1. Retrieving samba using CVS

    1. - Install a recent copy of cvs. All you really need is a - copy of the cvs client binary. +Samba source code. For the other source code repositories +on this system just substitute the correct package name. +

      Procedure 36.1. Retrieving Samba using CVS

      1. + Install a recent copy of CVS. All you really need is a + copy of the CVS client binary.

      2. - Run the command + Run the command:

        cvs -d :pserver:cvs@samba.org:/cvsroot login

      3. - When it asks you for a password type cvs. + When it asks you for a password, type cvs.

      4. Run the command

        - cvs -d :pserver:cvs@samba.org:/cvsroot co samba + cvs -d :pserver:CVS@samba.org:/cvsroot co samba.

        - This will create a directory called samba containing the - latest samba source code (i.e. the HEAD tagged cvs branch). This + This will create a directory called samba containing the + latest Samba source code (i.e., the HEAD tagged CVS branch). This currently corresponds to the 3.0 development tree.

        CVS branches other then HEAD can be obtained by using the - -r and defining a tag name. A list of branch tag names - can be found on the "Development" page of the samba web site. A common - request is to obtain the latest 3.0 release code. This could be done by + -r and defining a tag name. A list of branch tag names + can be found on the “Development” page of the Samba Web site. A common + request is to obtain the latest 3.0 release code. This could be done by using the following command:

        - cvs -d :pserver:cvs@samba.org:/cvsroot co -r SAMBA_3_0 samba + cvs -d :pserver:cvs@samba.org:/cvsroot co -r SAMBA_3_0 samba.

      5. - Whenever you want to merge in the latest code changes use - the following command from within the samba directory: + Whenever you want to merge in the latest code changes, use + the following command from within the Samba directory:

        cvs update -d -P -

    Accessing the samba sources via rsync and ftp

    - pserver.samba.org also exports unpacked copies of most parts of the CVS - tree at ftp://pserver.samba.org/pub/unpacked and also via anonymous rsync at - rsync://pserver.samba.org/ftp/unpacked/. I recommend using rsync rather than ftp. - See the rsync homepage for more info on rsync. +

    Accessing the Samba Sources via rsync and ftp

    + + + pserver.samba.org also exports unpacked copies of most parts of the CVS + tree at ftp://pserver.samba.org/pub/unpacked and also via anonymous rsync at + rsync://pserver.samba.org/ftp/unpacked/. I recommend using rsync rather than ftp. + See the rsync homepage for more info on rsync.

    The disadvantage of the unpacked trees is that they do not support automatic - merging of local changes like CVS does. rsync access is most convenient - for an initial install. -

    Verifying Samba's PGP signature

    -In these days of insecurity, it's strongly recommended that you verify the PGP -signature for any source file before installing it. Even if you're not -downloading from a mirror site, verifying PGP signatures should be a -standard reflex. + merging of local changes like CVS does. rsync access is most convenient + for an initial install. +

    Verifying Samba's PGP Signature

    + +It is strongly recommended that you verify the PGP signature for any source file before +installing it. Even if you're not downloading from a mirror site, verifying PGP signatures +should be a standard reflex. Many people today use the GNU GPG toolset in place of PGP. +GPG can substitute for PGP.

    With that said, go ahead and download the following files:

     $ wget http://us1.samba.org/samba/ftp/samba-2.2.8a.tar.asc
     $ wget http://us1.samba.org/samba/ftp/samba-pubkey.asc
     

    - + The first file is the PGP signature for the Samba source file; the other is the Samba public PGP key itself. Import the public PGP key with:

     $ gpg --import samba-pubkey.asc
     

    -And verify the Samba source code integrity with: +and verify the Samba source code integrity with:

     $ gzip -d samba-2.2.8a.tar.gz
     $ gpg --verify samba-2.2.8a.tar.asc
     

    -If you receive a message like, "Good signature from Samba Distribution -Verification Key..." +If you receive a message like, “Good signature from Samba Distribution Verification Key...” then all is well. The warnings about trust relationships can be ignored. An example of what you would not want to see would be: -

    - - gpg: BAD signature from "Samba Distribution Verification Key" - -

    Building the Binaries

    - To do this, first run the program ./configure +

    +     gpg: BAD signature from “Samba Distribution Verification Key”
    +

    Building the Binaries

    + + To build the binaries, first run the program ./configure in the source directory. This should automatically configure Samba for your operating system. If you have unusual - needs then you may wish to run

    root# ./configure --help
    -

    first to see what special options you can enable. - Then executing

    root# make

    will create the binaries. Once it's successfully - compiled you can use

    root# make install

    to install the binaries and manual pages. You can + needs, then you may wish to run

    root# ./configure --help
    +

    first to see what special options you can enable. Now execute ./configure with any arguments it might need:

    root# ./configure [... arguments ...]

    Executing

    + +

    root# make

    will create the binaries. Once it is successfully + compiled you can use

    root# make install

    to install the binaries and manual pages. You can separately install the binaries and/or man pages using

    root# make installbin
     

    and

    root# make installman
    -	

    Note that if you are upgrading for a previous version +

    Note that if you are upgrading from a previous version of Samba you might like to know that the old versions of - the binaries will be renamed with a ".old" extension. You + the binaries will be renamed with an “.old” extension. You can go back to the previous version with

    root# make revert
    -

    if you find this version a disaster!

    Compiling samba with Active Directory support

    In order to compile samba with ADS support, you need to have installed - on your system:

    • the MIT kerberos development libraries - (either install from the sources or use a package). The - Heimdal libraries will not work.

    • the OpenLDAP development libraries.

    If your kerberos libraries are in a non-standard location then +

    if you find this version a disaster!

    Compiling Samba with Active Directory Support

    In order to compile Samba with ADS support, you need to have installed + on your system:

    • The MIT or Heimdal kerberos development libraries + (either install from the sources or use a package).

    • The OpenLDAP development libraries.

    If your kerberos libraries are in a non-standard location, then remember to add the configure option - --with-krb5=DIR.

    After you run configure make sure that - include/config.h it generates contains lines like + --with-krb5=DIR.

    After you run configure, make sure that + include/config.h it generates contain lines like this:

     #define HAVE_KRB5 1
     #define HAVE_LDAP 1
    -

    If it doesn't then configure did not find your krb5 libraries or - your ldap libraries. Look in config.log to figure - out why and fix it.

    Installing the required packages for Debian

    On Debian you need to install the following packages:

    -

    • libkrb5-dev

    • krb5-user

    -

    Installing the required packages for RedHat

    On RedHat this means you should have at least:

    -

    • krb5-workstation (for kinit)

    • krb5-libs (for linking with)

    • krb5-devel (because you are compiling from source)

    -

    in addition to the standard development environment.

    Note that these are not standard on a RedHat install, and you may need - to get them off CD2.

    Starting the smbd and nmbd

    You must choose to start smbd and nmbd either +

    If it does not, configure did not find your KRB5 libraries or + your LDAP libraries. Look in config.log to figure + out why and fix it.

    Installing the Required Packages for Debian

    On Debian, you need to install the following packages:

    +

    • libkrb5-dev
    • krb5-user

    +

    Installing the Required Packages for Red Hat Linux

    On Red Hat Linux, this means you should have at least:

    +

    • krb5-workstation (for kinit)
    • krb5-libs (for linking with)
    • krb5-devel (because you are compiling from source)

    +

    in addition to the standard development environment.

    If these files are not installed on your system, you should check the installation + CDs to find which has them and install the files using your tool of choice. If in doubt + about what tool to use, refer to the Red Hat Linux documentation.

    SuSE Linux Package Requirements

    SuSE Linux installs Heimdal packages that may be required to allow you to build + binary packages. You should verify that the development libraries have been installed on + your system. +

    SuSE Linux Samba RPMs support Kerberos. Please refer to the documentation for + your SuSE Linux system for information regading SuSE Linux specific configuration. + Additionally, SuSE are very active in the maintenance of Samba packages that provide + the maximum capabilities that are available. You should consider using SuSE provided + packages where they are available. +

    Starting the smbd and nmbd

    + + You must choose to start smbd and nmbd either as daemons or from inetd. Don't try to do both! Either you can put them in inetd.conf and have them started on demand @@ -15405,94 +15644,105 @@ example of what you would not want to see would be: daemons either from the command line or in /etc/rc.local. See the man pages for details on the command line options. Take particular care to read - the bit about what user you need to be in order to start - Samba. In many cases you must be root.

    The main advantage of starting smbd + the bit about what user you need to have to start + Samba. In many cases, you must be root.

    The main advantage of starting smbd and nmbd using the recommended daemon method is that they will respond slightly more quickly to an initial connection - request.

    Starting from inetd.conf

    Note

    The following will be different if + request.

    Starting from inetd.conf

    Note

    The following will be different if you use NIS, NIS+ or LDAP to distribute services maps.

    Look at your /etc/services. - What is defined at port 139/tcp. If nothing is defined - then add a line like this:

    netbios-ssn     139/tcp

    similarly for 137/udp you should have an entry like:

    netbios-ns	137/udp

    Next edit your /etc/inetd.conf - and add two lines something like this:

    +		What is defined at port 139/tcp? If nothing is defined, 
    +		then add a line like this:

    netbios-ssn     139/tcp

    Similarly for 137/udp, you should have an entry like:

    netbios-ns	137/udp

    Next, edit your /etc/inetd.conf + and add two lines like this:

     		netbios-ssn stream tcp nowait root /usr/local/samba/bin/smbd smbd 
     		netbios-ns dgram udp wait root /usr/local/samba/bin/nmbd nmbd 
     		

    The exact syntax of /etc/inetd.conf - varies between unixes. Look at the other entries in inetd.conf - for a guide.

    Some distributions use xinetd instead of inetd. Consult the - xinetd manual for configuration information.

    Note

    Some unixes already have entries like netbios_ns + varies between UNIXes. Look at the other entries in inetd.conf + for a guide.

    + + Some distributions use xinetd instead of inetd. Consult the + xinetd manual for configuration information.

    Note

    Some UNIXes already have entries like netbios_ns (note the underscore) in /etc/services. - You must either edit /etc/services or + You must edit /etc/services or /etc/inetd.conf to make them consistent. -

    Note

    On many systems you may need to use the - interfaces option in smb.conf to specify the IP +

    Note

    + + On many systems you may need to use the + interfaces option in smb.conf to specify the IP address and netmask of your interfaces. Run ifconfig - as root if you don't know what the broadcast is for your + as root if you do not know what the broadcast is for your net. nmbd tries to determine it at run - time, but fails on some unixes. -

    Warning

    Many unixes only accept around 5 + time, but fails on some UNIXes. +

    Warning

    Many UNIXes only accept around five parameters on the command line in inetd.conf. This means you shouldn't use spaces between the options and - arguments, or you should use a script, and start the script + arguments, or you should use a script and start the script from inetd.

    Restart inetd, perhaps just send it a HUP.

     			root# killall -HUP inetd
    -		

    Alternative: starting it as a daemon

    To start the server as a daemon you should create +

    Alternative: Starting smbd as a Daemon

    + + To start the server as a daemon, you should create a script something like this one, perhaps calling it startsmb.

     		#!/bin/sh
     		/usr/local/samba/bin/smbd -D 
     		/usr/local/samba/bin/nmbd -D 
    -		

    then make it executable with chmod +

    Make it executable with chmod +x startsmb

    You can then run startsmb by - hand or execute it from /etc/rc.local -

    To kill it send a kill signal to the processes - nmbd and smbd.

    Note

    If you use the SVR4 style init system then + hand or execute it from /etc/rc.local. +

    To kill it, send a kill signal to the processes + nmbd and smbd.

    Note

    If you use the SVR4 style init system, you may like to look at the examples/svr4-startup - script to make Samba fit into that system.

    Chapter 37. Portability

    Jelmer R. Vernooij

    The Samba Team

    Samba works on a wide range of platforms but the interface all the + script to make Samba fit into that system.

    Chapter 37. Portability

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Samba works on a wide range of platforms but the interface all the platforms provide is not always compatible. This chapter contains -platform-specific information about compiling and using samba.

    HPUX

    -HP's implementation of supplementary groups is, er, non-standard (for -hysterical reasons). There are two group files, /etc/group and +platform-specific information about compiling and using Samba.

    HPUX

    +HP's implementation of supplementary groups is non-standard (for +historical reasons). There are two group files, /etc/group and /etc/logingroup; the system maps UIDs to numbers using the former, but -initgroups() reads the latter. Most system admins who know the ropes +initgroups() reads the latter. Most system admins who know the ropes symlink /etc/group to /etc/logingroup -(hard link doesn't work for reasons too stupid to go into here). initgroups() will complain if one of the +(hard link does not work for reasons too obtuse to go into here). initgroups() will complain if one of the groups you're in in /etc/logingroup has what it considers to be an invalid ID, which means outside the range [0..UID_MAX], where UID_MAX is (I think) -60000 currently on HP-UX. This precludes -2 and 65534, the usual nobody +60000 currently on HP-UX. This precludes -2 and 65534, the usual nobody GIDs.

    -If you encounter this problem, make sure that the programs that are failing -to initgroups() be run as users not in any groups with GIDs outside the +If you encounter this problem, make sure the programs that are failing +to initgroups() are run as users, not in any groups with GIDs outside the allowed range.

    This is documented in the HP manual pages under setgroups(2) and passwd(4).

    -On HPUX you must use gcc or the HP ANSI compiler. The free compiler -that comes with HP-UX is not ANSI compliant and cannot compile -Samba. -

    SCO UNIX

    -If you run an old version of SCO UNIX then you may need to get important +On HP-UX you must use gcc or the HP ANSI compiler. The free compiler +that comes with HP-UX is not ANSI compliant and cannot compile Samba. +

    SCO UNIX

    +If you run an old version of SCO UNIX, you may need to get important TCP/IP patches for Samba to work correctly. Without the patch, you may -encounter corrupt data transfers using samba. +encounter corrupt data transfers using Samba.

    The patch you need is UOD385 Connection Drivers SLS. It is available from -SCO (ftp.sco.com, directory SLS, +SCO (ftp.sco.com, directory SLS, files uod385a.Z and uod385a.ltr.Z). -

    DNIX

    +

    +The information provided here refers to an old version of SCO UNIX. If you require +binaries for more recent SCO UNIX products, please contact SCO to obtain packages that are +ready to install. You should also verify with SCO that your platform is up-to-date for the +binary packages you will install. This is important if you wish to avoid data corruption +problems with your installation. To build Samba for SCO UNIX products may +require significant patching of Samba source code. It is much easier to obtain binary +packages directly from SCO. +

    DNIX

    DNIX has a problem with seteuid() and setegid(). These routines are needed for Samba to work correctly, but they were left out of the DNIX C library for some reason.

    For this reason Samba by default defines the macro NO_EID in the DNIX section of includes.h. This works around the problem in a limited way, -but it is far from ideal, some things still won't work right. +but it is far from ideal, and some things still will not work right.

    -To fix the problem properly you need to assemble the following two +To fix the problem properly, you need to assemble the following two functions and then either add them to your C library or link them into -Samba. -

    -put this in the file setegid.s: +Samba. Put the following in the file setegid.s:

             .globl  _setegid
     _setegid:
    @@ -15507,7 +15757,7 @@ _setegid:
             clrl    d0
             rts
     

    -put this in the file seteuid.s: +Put this in the file seteuid.s:

             .globl  _seteuid
     _seteuid:
    @@ -15522,7 +15772,7 @@ _seteuid:
             clrl    d0
             rts
     

    -after creating the above files you then assemble them using +After creating the above files, you then assemble them using

     $ as seteuid.s
     $ as setegid.s
    @@ -15530,7 +15780,7 @@ after creating the above files you then assemble them using
     that should produce the files seteuid.o and 
     setegid.o
     

    -then you need to add these to the LIBSM line in the DNIX section of +Then you need to add these to the LIBSM line in the DNIX section of the Samba Makefile. Your LIBSM line will then look something like this:

     LIBSM = setegid.o seteuid.o -ln
    @@ -15538,8 +15788,8 @@ LIBSM = setegid.o seteuid.o -ln
     You should then remove the line:
     

     #define NO_EID
    -

    from the DNIX section of includes.h

    RedHat Linux Rembrandt-II

    -By default RedHat Rembrandt-II during installation adds an +

    from the DNIX section of includes.h.

    Red Hat Linux

    +By default during installation, some versions of Red Hat Linux add an entry to /etc/hosts as follows:

     	127.0.0.1 loopback "hostname"."domainname"
    @@ -15547,16 +15797,16 @@ entry to /etc/hosts as follows:
     

    This causes Samba to loop back onto the loopback interface. The result is that Samba fails to communicate correctly with -the world and therefor may fail to correctly negotiate who +the world and therefore may fail to correctly negotiate who is the master browse list holder and who is the master browser.

    -Corrective Action: Delete the entry after the word loopback - in the line starting 127.0.0.1 -

    AIX

    Sequential Read Ahead

    +Corrective Action: Delete the entry after the word "loopback" +in the line starting 127.0.0.1. +

    AIX

    Sequential Read Ahead

    Disabling Sequential Read Ahead using vmtune -r 0 improves Samba performance significantly. -

    Solaris

    Locking improvements

    Some people have been experiencing problems with F_SETLKW64/fcntl -when running Samba on Solaris. The built in file locking mechanism was +

    Solaris

    Locking Improvements

    Some people have been experiencing problems with F_SETLKW64/fcntl +when running Samba on Solaris. The built-in file locking mechanism was not scalable. Performance would degrade to the point where processes would get into loops of trying to lock a file. It would try a lock, then fail, then try again. The lock attempt was failing before the grant was @@ -15567,92 +15817,77 @@ be stuck if F_SETLKW64 loops. Sun released patches for Solaris 2.6, 8, and 9. The patch for Solaris 7 has not been released yet.

    -The patch revision for 2.6 is 105181-34 -for 8 is 108528-19 and for 9 is 112233-04 +The patch revision for 2.6 is 105181-34, for 8 is 108528-19 and for 9 is 112233-04.

    -After the install of these patches it is recommended to reconfigure -and rebuild samba. -

    Thanks to Joe Meslovich for reporting

    Winbind on Solaris 9

    -Nsswitch on Solaris 9 refuses to use the winbind nss module. This behavior -is fixed by Sun in patch 113476-05 which as of March 2003 is not in any +After the install of these patches, it is recommended to reconfigure +and rebuild Samba. +

    Thanks to Joe Meslovich for reporting this.

    Winbind on Solaris 9

    +Nsswitch on Solaris 9 refuses to use the Winbind NSS module. This behavior +is fixed by Sun in patch 113476-05, which as of March 2003, is not in any roll-up packages. -

    Chapter 38. Samba and other CIFS clients

    Jelmer R. Vernooij

    The Samba Team

    Jim McDonough

    OS/2

    5 Mar 2001

    This chapter contains client-specific information.

    Macintosh clients?

    - Yes. Thursby now has a CIFS Client / Server called DAVE -

    -They test it against Windows 95, Windows NT and samba for -compatibility issues. At the time of writing, DAVE was at version -1.0.1. The 1.0.0 to 1.0.1 update is available as a free download from -the Thursby web site (the speed of finder copies has been greatly -enhanced, and there are bug-fixes included). +

    Chapter 38. Samba and Other CIFS Clients

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Dan Shearer

    Samba Team

    Jim McDonough

    OS/2

    5 Mar 2001

    This chapter contains client-specific information.

    Macintosh Clients

    +Yes. Thursby has a CIFS Client/Server called DAVE. +They test it against Windows 95, Windows NT /200x/XP and Samba for +compatibility issues. At the time of this writing, DAVE was at version +4.1. Please refer to Thursby's Web site for more information regarding this +product.

    -Alternatives - There are two free implementations of AppleTalk for -several kinds of UNIX machines, and several more commercial ones. +Alternatives There are two free implementations of AppleTalk for +several kinds of UNIX machines and several more commercial ones. These products allow you to run file services and print services natively to Macintosh users, with no additional support required on -the Macintosh. The two free implementations are -Netatalk, and -CAP. -What Samba offers MS -Windows users, these packages offer to Macs. For more info on these -packages, Samba, and Linux (and other UNIX-based systems) see -http://www.eats.com/linux_mac_win.html -

    Newer versions of the Macintosh (Mac OS X) include Samba.

    OS2 Client

    Configuring OS/2 Warp Connect or - OS/2 Warp 4 as a client for Samba

    Basically, you need three components:

    • The File and Print Client ('IBM Peer')

    • TCP/IP ('Internet support')

    • The "NetBIOS over TCP/IP" driver ('TCPBEUI')

    Installing the first two together with the base operating +the Macintosh. The two free implementations are +Netatalk, and +CAP. +What Samba offers MS Windows users, these packages offer to Macs. +For more info on these packages, Samba, and Linux (and other UNIX-based systems), see +http://www.eats.com/linux_mac_win.html. +

    Newer versions of the Macintosh (Mac OS X) include Samba.

    OS2 Client

    Configuring OS/2 Warp Connect or OS/2 Warp 4

    Basically, you need three components:

    • The File and Print Client (IBM Peer)
    • TCP/IP (Internet support)
    • The “NetBIOS over TCP/IP” driver (TCPBEUI)

    Installing the first two together with the base operating system on a blank system is explained in the Warp manual. If Warp has already been installed, but you now want to install the - networking support, use the "Selective Install for Networking" - object in the "System Setup" folder.

    Adding the "NetBIOS over TCP/IP" driver is not described + networking support, use the “Selective Install for Networking” + object in the “System Setup” folder.

    Adding the “NetBIOS over TCP/IP” driver is not described in the manual and just barely in the online documentation. Start - MPTS.EXE, click on OK, click on "Configure LAPS" and click - on "IBM OS/2 NETBIOS OVER TCP/IP" in 'Protocols'. This line - is then moved to 'Current Configuration'. Select that line, - click on "Change number" and increase it from 0 to 1. Save this - configuration.

    If the Samba server(s) is not on your local subnet, you + MPTS.EXE, click on OK, click on Configure LAPS and click + on IBM OS/2 NETBIOS OVER TCP/IP in Protocols. This line + is then moved to Current Configuration. Select that line, + click on Change number and increase it from 0 to 1. Save this + configuration.

    If the Samba server is not on your local subnet, you can optionally add IP names and addresses of these servers - to the "Names List", or specify a WINS server ('NetBIOS - Nameserver' in IBM and RFC terminology). For Warp Connect you - may need to download an update for 'IBM Peer' to bring it on - the same level as Warp 4. See the webpage mentioned above.

    Configuring OS/2 Warp 3 (not Connect), - OS/2 1.2, 1.3 or 2.x for Samba

    You can use the free Microsoft LAN Manager 2.2c Client - for OS/2 from - - ftp://ftp.microsoft.com/BusSys/Clients/LANMAN.OS2/. - In - a nutshell, edit the file \OS2VER in the root directory of - the OS/2 boot partition and add the lines:

    +		to the Names List, or specify a  WINS server (NetBIOS 
    +		Nameserver in IBM and RFC terminology). For Warp Connect, you 
    +		may need to download an update for IBM Peer to bring it on 
    +		the same level as Warp 4. See the Web page mentioned above.

    Configuring Other Versions of OS/2

    This sections deals with configuring OS/2 Warp 3 (not Connect), OS/2 1.2, 1.3 or 2.x.

    You can use the free Microsoft LAN Manager 2.2c Client for OS/2 that is + available from + + ftp://ftp.microsoft.com/BusSys/Clients/LANMAN.OS2/. In a nutshell, edit + the file \OS2VER in the root directory of the OS/2 boot partition and add the lines:

     		20=setup.exe
     		20=netwksta.sys
     		20=netvdd.sys
    -		

    before you install the client. Also, don't use the - included NE2000 driver because it is buggy. Try the NE2000 - or NS2000 driver from - - ftp://ftp.cdrom.com/pub/os2/network/ndis/ instead. -

    Printer driver download for for OS/2 clients?

    First, create a share called [PRINTDRV] that is - world-readable. Copy your OS/2 driver files there. Note - that the .EA_ files must still be separate, so you will need - to use the original install files, and not copy an installed - driver from an OS/2 system.

    Install the NT driver first for that printer. Then, - add to your smb.conf a parameter, os2 driver map = filename. Then, in the file - specified by filename, map the - name of the NT driver name to the OS/2 driver name as - follows:

    nt driver name = os2 driver name.device name, e.g.:

    +

    before you install the client. Also, do not use the included NE2000 driver because it is buggy. + Try the NE2000 or NS2000 driver from + ftp://ftp.cdrom.com/pub/os2/network/ndis/ instead. +

    Printer Driver Download for OS/2 Clients

    Create a share called [PRINTDRV] that is + world-readable. Copy your OS/2 driver files there. The .EA_ + files must still be separate, so you will need to use the original install files + and not copy an installed driver from an OS/2 system.

    Install the NT driver first for that printer. Then, add to your smb.conf a parameter, + os2 driver map = filename. + Next, in the file specified by filename, map the + name of the NT driver name to the OS/2 driver name as follows:

    nt driver name = os2 driver name.device name, e.g.

    HP LaserJet 5L = LASERJET.HP LaserJet 5L

    You can have multiple drivers mapped in this file.

    If you only specify the OS/2 driver name, and not the device name, the first attempt to download the driver will actually download the files, but the OS/2 client will tell - you the driver is not available. On the second attempt, it - will work. This is fixed simply by adding the device name + you the driver is not available. On the second attempt, it + will work. This is fixed simply by adding the device name to the mapping, after which it will work on the first attempt. -

    Windows for Workgroups

    Latest TCP/IP stack from Microsoft

    Use the latest TCP/IP stack from Microsoft if you use Windows -for Workgroups. -

    The early TCP/IP stacks had lots of bugs.

    -Microsoft has released an incremental upgrade to their TCP/IP 32-Bit -VxD drivers. The latest release can be found on their ftp site at +

    Windows for Workgroups

    Latest TCP/IP Stack from Microsoft

    Use the latest TCP/IP stack from Microsoft if you use Windows +for Workgroups. The early TCP/IP stacks had lots of bugs.

    +Microsoft has released an incremental upgrade to their TCP/IP 32-bit +VxD drivers. The latest release can be found on their ftp site at ftp.microsoft.com, located in /peropsys/windows/public/tcpip/wfwt32.exe. There is an update.txt file there that describes the problems that were -fixed. New files include WINSOCK.DLL, +fixed. New files include WINSOCK.DLL, TELNET.EXE, WSOCK.386, VNBT.386, @@ -15660,375 +15895,336 @@ fixed. New files include WINSOCK.DLL, TRACERT.EXE, NETSTAT.EXE, and NBTSTAT.EXE. -

    Delete .pwl files after password change

    -WfWg does a lousy job with passwords. I find that if I change my -password on either the unix box or the PC the safest thing to do is to -delete the .pwl files in the windows directory. The PC will complain about not finding the files, but will soon get over it, allowing you to enter the new password. +

    Delete .pwl Files After Password Change

    +Windows for Workgroups does a lousy job with passwords. When you change passwords on either +the UNIX box or the PC, the safest thing to do is to delete the .pwl files in the Windows +directory. The PC will complain about not finding the files, but will soon get over it, +allowing you to enter the new password.

    -If you don't do this you may find that WfWg remembers and uses the old +If you do not do this, you may find that Windows for Workgroups remembers and uses the old password, even if you told it a new one.

    -Often WfWg will totally ignore a password you give it in a dialog box. -

    Configuring WfW password handling

    -There is a program call admincfg.exe -on the last disk (disk 8) of the WFW 3.11 disk set. To install it +Often Windows for Workgroups will totally ignore a password you give it in a dialog box. +

    Configuring Windows for Workgroups Password Handling

    +There is a program call admincfg.exe +on the last disk (disk 8) of the WFW 3.11 disk set. To install it, type EXPAND A:\ADMINCFG.EX_ C:\WINDOWS\ADMINCFG.EXE. -Then add an icon -for it via the Program Manager New Menu. -This program allows you to control how WFW handles passwords. ie disable Password Caching etc -for use with security = user -

    Case handling of passwords

    Windows for Workgroups uppercases the password before sending it to the server. Unix passwords can be case-sensitive though. Check the smb.conf information on password level to specify what characters samba should try to uppercase when checking.

    Use TCP/IP as default protocol

    To support print queue reporting you may find +Then add an icon for it via the Program Manager New Menu. +This program allows you to control how WFW handles passwords, i.e., +Disable Password Caching and so on. +for use with security = user. +

    Password Case Sensitivity

    Windows for Workgroups uppercases the password before sending it to the server. +UNIX passwords can be case-sensitive though. Check the smb.conf information on +password level to specify what characters +Samba should try to uppercase when checking.

    Use TCP/IP as Default Protocol

    To support print queue reporting, you may find that you have to use TCP/IP as the default protocol under -WfWg. For some reason if you leave NetBEUI as the default +Windows for Workgroups. For some reason, if you leave NetBEUI as the default, it may break the print queue reporting on some systems. -It is presumably a WfWg bug.

    Speed improvement

    +It is presumably a Windows for Workgroups bug.

    Speed Improvement

    Note that some people have found that setting DefaultRcvWindow in the [MSTCP] section of the -SYSTEM.INI file under WfWg to 3072 gives a -big improvement. I don't know why. +SYSTEM.INI file under Windows for Workgroups to 3072 gives a +big improvement.

    -My own experience with DefaultRcvWindow is that I get much better +My own experience with DefaultRcvWindow is that I get a much better performance with a large value (16384 or larger). Other people have reported that anything over 3072 slows things down enormously. One person even reported a speed drop of a factor of 30 when he went from -3072 to 8192. I don't know why. -

    Windows '95/'98

    -When using Windows 95 OEM SR2 the following updates are recommended where Samba -is being used. Please NOTE that the above change will affect you once these +3072 to 8192. +

    Windows 95/98

    +When using Windows 95 OEM SR2, the following updates are recommended where Samba +is being used. Please note that the above change will effect you once these updates have been installed.

    There are more updates than the ones mentioned here. You are referred to the Microsoft Web site for all currently available updates to your specific version of Windows 95.

    Kernel Update: KRNLUPD.EXE
    Ping Fix: PINGUPD.EXE
    RPC Update: RPCRTUPD.EXE
    TCP/IP Update: VIPUPD.EXE
    Redirector Update: VRDRUPD.EXE

    -Also, if using MS Outlook it is desirable to +Also, if using MS Outlook, it is desirable to install the OLEUPD.EXE fix. This fix may stop your machine from hanging for an extended period when exiting -Outlook and you may also notice a significant speedup when accessing network +Outlook and you may notice a significant speedup when accessing network neighborhood services. -

    Speed improvement

    -Configure the win95 TCPIP registry settings to give better -performance. I use a program called MTUSPEED.exe which I got off the -net. There are various other utilities of this type freely available. -

    Windows 2000 Service Pack 2

    +

    Speed Improvement

    +Configure the Windows 95 TCP/IP registry settings to give better +performance. I use a program called MTUSPEED.exe that I got off the +Internet. There are various other utilities of this type freely available. +

    Windows 2000 Service Pack 2

    There are several annoyances with Windows 2000 SP2. One of which only appears when using a Samba server to host user profiles -to Windows 2000 SP2 clients in a Windows domain. This assumes +to Windows 2000 SP2 clients in a Windows domain. This assumes that Samba is a member of the domain, but the problem will -likely occur if it is not. +most likely occur if it is not.

    In order to serve profiles successfully to Windows 2000 SP2 clients (when not operating as a PDC), Samba must have -nt acl support = no +nt acl support = no added to the file share which houses the roaming profiles. If this is not done, then the Windows 2000 SP2 client will complain about not being able to access the profile (Access Denied) and create multiple copies of it on disk (DOMAIN.user.001, -DOMAIN.user.002, etc...). See the -smb.conf man page -for more details on this option. Also note that the -nt acl support parameter was formally a global parameter in +DOMAIN.user.002, and so on). See the smb.conf man page +for more details on this option. Also note that the +nt acl support parameter was formally a global parameter in releases prior to Samba 2.2.2.

    -The following is a minimal profile share: -

    Example 38.1. Minimal profile share

    [profile]
    path = /export/profile
    create mask = 0600
    directory mask = 0700
    nt acl support = no
    read only = no

    -The reason for this bug is that the Win2k SP2 client copies -the security descriptor for the profile which contains -the Samba server's SID, and not the domain SID. The client + provides a minimal profile share. +

    Example 38.1. Minimal profile share

    [profile]
    path = /export/profile
    create mask = 0600
    directory mask = 0700
    nt acl support = no
    read only = no

    +The reason for this bug is that the Windows 200x SP2 client copies +the security descriptor for the profile that contains +the Samba server's SID, and not the domain SID. The client compares the SID for SAMBA\user and realizes it is -different that the one assigned to DOMAIN\user. Hence the reason +different from the one assigned to DOMAIN\user. Hence, the reason for the access denied message.

    -By disabling the nt acl support parameter, Samba will send -the Win2k client a response to the QuerySecurityDescriptor -trans2 call which causes the client to set a default ACL -for the profile. This default ACL includes -

    DOMAIN\user "Full Control">

    Note

    This bug does not occur when using winbind to -create accounts on the Samba host for Domain users.

    Windows NT 3.1

    If you have problems communicating across routers with Windows -NT 3.1 workstations, read this Microsoft Knowledge Base article. +By disabling the nt acl support parameter, Samba will send +the Windows 200x client a response to the QuerySecurityDescriptor trans2 call, which causes the client +to set a default ACL for the profile. This default ACL includes: +

    DOMAIN\user “Full Control>

    Note

    This bug does not occur when using Winbind to +create accounts on the Samba host for Domain users.

    Windows NT 3.1

    If you have problems communicating across routers with Windows +NT 3.1 workstations, read this Microsoft Knowledge Base article. -

    Chapter 39. Samba Performance Tuning

    Paul Cochrane

    Dundee Limb Fitting Centre

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Comparisons

    +

    Chapter 39. Samba Performance Tuning

    Paul Cochrane

    Dundee Limb Fitting Centre

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Comparisons

    The Samba server uses TCP to talk to the client. Thus if you are -trying to see if it performs well you should really compare it to +trying to see if it performs well, you should really compare it to programs that use the same protocol. The most readily available -programs for file transfer that use TCP are ftp or another TCP based +programs for file transfer that use TCP are ftp or another TCP-based SMB server.

    -If you want to test against something like a NT or WfWg server then +If you want to test against something like an NT or Windows for Workgroups server, then you will have to disable all but TCP on either the client or -server. Otherwise you may well be using a totally different protocol +server. Otherwise, you may well be using a totally different protocol (such as NetBEUI) and comparisons may not be valid.

    -Generally you should find that Samba performs similarly to ftp at raw +Generally, you should find that Samba performs similarly to ftp at raw transfer speed. It should perform quite a bit faster than NFS, -although this very much depends on your system. +although this depends on your system.

    Several people have done comparisons between Samba and Novell, NFS or -WinNT. In some cases Samba performed the best, in others the worst. I -suspect the biggest factor is not Samba vs some other system but the +Windows NT. In some cases Samba performed the best, in others the worst. I +suspect the biggest factor is not Samba versus some other system, but the hardware and drivers used on the various systems. Given similar -hardware Samba should certainly be competitive in speed with other +hardware, Samba should certainly be competitive in speed with other systems. -

    Socket options

    +

    Socket Options

    There are a number of socket options that can greatly affect the -performance of a TCP based server like Samba. +performance of a TCP-based server like Samba.

    The socket options that Samba uses are settable both on the command line with the -O option, or in the smb.conf file.

    -The socket options section of the smb.conf manual page describes how +The socket options section of the smb.conf manual page describes how to set these and gives recommendations.

    -Getting the socket options right can make a big difference to your +Getting the socket options correct can make a big difference to your performance, but getting them wrong can degrade it by just as much. The correct settings are very dependent on your local network.

    -The socket option TCP_NODELAY is the one that seems to make the -biggest single difference for most networks. Many people report that -adding socket options = TCP_NODELAY doubles the read -performance of a Samba drive. The best explanation I have seen for this is -that the Microsoft TCP/IP stack is slow in sending tcp ACKs. -

    Read size

    -The option read size affects the overlap of disk +The socket option TCP_NODELAY is the one that seems to make the biggest single difference +for most networks. Many people report that adding +socket options = TCP_NODELAY +doubles the read performance of a Samba drive. The best explanation I have seen for +this is that the Microsoft TCP/IP stack is slow in sending TCP ACKs. +

    Read Size

    +The option read size affects the overlap of disk reads/writes with network reads/writes. If the amount of data being transferred in several of the SMB commands (currently SMBwrite, SMBwriteX and -SMBreadbraw) is larger than this value then the server begins writing +SMBreadbraw) is larger than this value, then the server begins writing the data before it has received the whole packet from the network, or in the case of SMBreadbraw, it begins writing to the network before all the data has been read from disk.

    This overlapping works best when the speeds of disk and network access -are similar, having very little effect when the speed of one is much +are similar, having little effect when the speed of one is much greater than the other.

    -The default value is 16384, but very little experimentation has been -done yet to determine the optimal value, and it is likely that the best +The default value is 16384, but little experimentation has been +done as yet to determine the optimal value, and it is likely that the best value will vary greatly between systems anyway. A value over 65536 is pointless and will cause you to allocate memory unnecessarily. -

    Max xmit

    +

    Max Xmit

    At startup the client and server negotiate a maximum transmit size, which limits the size of nearly all SMB commands. You can set the -maximum size that Samba will negotiate using the max xmit option +maximum size that Samba will negotiate using the max xmit option in smb.conf. Note that this is the maximum size of SMB requests that -Samba will accept, but not the maximum size that the *client* will accept. +Samba will accept, but not the maximum size that the client will accept. The client maximum receive size is sent to Samba by the client and Samba -honours this limit. +honors this limit.

    It defaults to 65536 bytes (the maximum), but it is possible that some clients may perform better with a smaller transmit unit. Trying values of less than 2048 is likely to cause severe problems. -

    In most cases the default is the best option. -

    Log level

    -If you set the log level (also known as debug level) higher than 2 +

    Log Level

    +If you set the log level (also known as debug level) higher than 2 then you may suffer a large drop in performance. This is because the -server flushes the log file after each operation, which can be very +server flushes the log file after each operation, which can be quite expensive. -

    Read raw

    -The read raw operation is designed to be an optimised, low-latency +

    Read Raw

    +The read raw operation is designed to be an optimized, low-latency file read operation. A server may choose to not support it, -however. and Samba makes support for read raw optional, with it +however, and Samba makes support for read raw optional, with it being enabled by default.

    -In some cases clients don't handle read raw very well and actually +In some cases clients do not handle read raw very well and actually get lower performance using it than they get using the conventional read operations.

    -So you might like to try read raw = no and see what happens on your -network. It might lower, raise or not affect your performance. Only +So you might like to try read raw = no and see what happens on your +network. It might lower, raise or not effect your performance. Only testing can really tell. -

    Write raw

    -The write raw operation is designed to be an optimised, low-latency -file write operation. A server may choose to not support it, -however. and Samba makes support for write raw optional, with it -being enabled by default. +

    Write Raw

    +The write raw operation is designed to be an optimized, low-latency +file write operation. A server may choose to not support it, however, and Samba makes support for +write raw optional, with it being enabled by default.

    -Some machines may find write raw slower than normal write, in which +Some machines may find write raw slower than normal write, in which case you may wish to change this option. -

    Slow Logins

    +

    Slow Logins

    Slow logins are almost always due to the password checking time. Using -the lowest practical password level will improve things. -

    Client tuning

    +the lowest practical password level will improve things. +

    Client Tuning

    Often a speed problem can be traced to the client. The client (for example Windows for Workgroups) can often be tuned for better TCP performance. Check the sections on the various clients in -Samba and Other Clients. -

    Samba performance problem due changing kernel

    -Hi everyone. I am running Gentoo on my server and samba 2.2.8a. Recently -I changed kernel version from linux-2.4.19-gentoo-r10 to -linux-2.4.20-wolk4.0s. And now I have performance issue with samba. Ok -many of you will probably say that move to vanilla sources...well I tried -it too and it didn't work. I have 100mb LAN and two computers (linux + -Windows2000). Linux server shares directory with DivX files, client -(windows2000) plays them via LAN. Before when I was running 2.4.19 kernel -everything was fine, but now movies freezes and stops...I tried moving -files between server and Windows and it's terribly slow. -

    -Grab mii-tool and check the duplex settings on the NIC. +. +

    Samba Performance Problem Due to Changing Linux Kernel

    +A user wrote the following to the mailing list: +

    +I am running Gentoo on my server and Samba 2.2.8a. Recently +I changed kernel version from linux-2.4.19-gentoo-r10 to +linux-2.4.20-wolk4.0s. And now I have a performance issue with Samba. +Many of you will probably say, “Move to vanilla sources!” +Well, I tried that and it didn't work. I have a 100mb LAN and two computers (Linux and +Windows 2000). The Linux server shares directories with DivX files, the client +(Windows 2000) plays them via LAN. Before when I was running the 2.4.19 kernel +everything was fine, but now movies freeze and stop. I tried moving +files between the server and Windows and it is terribly slow. +

    +The answer he was given is: +

    +Grab the mii-tool and check the duplex settings on the NIC. My guess is that it is a link layer issue, not an application -layer problem. Also run ifconfig and verify that the framing -error, collisions, etc... look normal for ethernet. -

    Corrupt tdb Files

    -Well today it happened, Our first major problem using samba. -Our samba PDC server has been hosting 3 TB of data to our 500+ users -[Windows NT/XP] for the last 3 years using samba, no problem. -But today all shares went SLOW; very slow. Also the main smbd kept +layer problem. Also run ifconfig and verify that the framing +error, collisions, and so on, look normal for ethernet. +

    Corrupt tdb Files

    +Our Samba PDC server has been hosting three TB of data to our 500+ users +[Windows NT/XP] for the last three years using Samba without a problem. +Today all shares went very slow. Also the main smbd kept spawning new processes so we had 1600+ running smbd's (normally we avg. 250). -It crashed the SUN E3500 cluster twice. After a lot of searching I +It crashed the SUN E3500 cluster twice. After a lot of searching, I decided to rm /var/locks/*.tdb. Happy again.

    -Q1) Is there any method of keeping the *.tdb files in top condition or -how to early detect corruption? +Question: Is there any method of keeping the *.tdb files in top condition or +how can I detect early corruption?

    -A1) Yes, run tdbbackup each time after stopping nmbd and before starting nmbd. +Answer: Yes, run tdbbackup each time after stopping nmbd and before starting nmbd.

    -Q2) What I also would like to mention is that the service latency seems -a lot lower then before the locks cleanup, any ideas on keeping it top notch? +Question: What I also would like to mention is that the service latency seems +a lot lower than before the locks cleanup. Any ideas on keeping it top notch?

    -A2) Yes! Same answer as for Q1! -

    Chapter 40. DNS and DHCP Configuration Guide

    John H. Terpstra

    Samba Team

    Table of Contents

    Note

    Note

    +Answer: Yes. Same answer as for previous question! +

    Chapter 40. DNS and DHCP Configuration Guide

    John H. Terpstra

    Samba Team

    Table of Contents

    Note

    Note

    This chapter did not make it into this release. It is planned for the published release of this document. -

    Chapter 41. Further Resources

    Jelmer R. Vernooij

    The Samba Team

    May 1, 2003

    Chapter 41. Further Resources

    Jelmer R. Vernooij

    The Samba Team

    May 1, 2003

    Websites

    Index

    L

    ldap admin dn, Configuring Samba
    ldap delete dn, Configuring Samba
    ldap filter, Configuring Samba
    ldap machine suffix, Configuring Samba
    ldap passwd sync, Configuring Samba, Password synchronisation
    ldap ssl, Configuring Samba, Security and sambaSamAccount
    ldap suffix, Configuring Samba
    ldap trust ids, Configuring Samba
    ldap user suffix, Configuring Samba
    libnss_wins.so, /etc/nsswitch.conf
    Links
    hard, MS Windows NTFS Comparison with UNIX File Systems
    soft, MS Windows NTFS Comparison with UNIX File Systems
    Linuxprinting.org, CUPS Print Drivers from Linuxprinting.org
    lm announce, What is Browsing?
    lm interval, What is Browsing?
    LMB (see Local Master Browser)
    LMHOSTS, The LMHOSTS file
    load printers, Parameters Recommended for Use, A little Experiment to warn you, The [global] Section
    local master, What is Browsing?, Setting up WORKGROUP Browsing
    Local Master Browser, Use of the Remote Announce parameter
    locking, Discussion
    locking.tdb, The printing *.tdb Files
    (see also TDB)
    log files
    monitoring, Assumptions
    log level, Adding Machine to Domain Fails, extd_audit, Debug levels
    logon drive, Windows NT4 Workstation
    logon home, LDAP special attributes for sambaSamAccounts, Windows 9x / Me User Profiles, Mixed Windows 9x / Me and Windows NT4/200x User Profiles, Windows NT4 Workstation, Sharing Profiles between W9x/Me and NT4/200x/XP workstations
    logon path, LDAP special attributes for sambaSamAccounts, Mixed Windows 9x / Me and Windows NT4/200x User Profiles, Windows 9x / Me Profile Setup, Windows NT4 Workstation, Sharing Profiles between W9x/Me and NT4/200x/XP workstations
    logon script, LDAP special attributes for sambaSamAccounts
    lpadmin, CUPS Print Drivers from Linuxprinting.org, Setting up Quotas
    lppause command, Parameters Recommended for Use, Linking of smbd with libcups.so, From Windows Clients to a CUPS/Samba Print Server, Pre-conditions
    lpq cache time, Parameters Recommended for Use, The [global] Section
    lpq command, Parameters Recommended for Use, Linking of smbd with libcups.so, Pre-conditions
    lpresume command, Parameters Recommended for Use, Linking of smbd with libcups.so, Pre-conditions
    lprm command, Parameters Recommended for Use, Linking of smbd with libcups.so, Pre-conditions
    lpstat, Troubleshooting revisited

    P

    page_log, The page_log File Syntax
    passdb backend, MS Windows Workstation/Server Machine Trust Accounts, Account Information Databases, Technical Information, The pdbedit Command, Configuring Samba, Configuring, Users can not logon, auth methods does not work, Passdb Backends and Authentication
    password level, Password checking, The tests, Case handling of passwords, Slow Logins
    password server, Server Security (User Level Security), Security Mode and Master Browsers, Joining an NT4 type Domain with Samba-3, The tests
    patch, Patches
    path, "The network name cannot be found", The [printers] Section, Any [my_printer_name] Section, Print Commands, Creating the [print$] Share, Parameters in the [print$] Section, Subdirectory Structure in [print$], Samba receiving Jobfiles and passing them to CUPS, Auto-Deletion or Preservation of CUPS Spool Files, Permissions on -/var/spool/samba/ get reset after each -reboot, The tests
    PCL, GDI on Windows -- PostScript on UNIX, UNIX Printfile Conversion and GUI Basics, Driver Execution on the Server, Network PostScript RIP: CUPS Filters on Server -- clients use -PostScript Driver with CUPS-PPDs
    PDF, Windows Drivers, GDI and EMF, PostScript Printer Description (PPD) Specification
    pdf, MIME type Conversion Rules
    PDL, GDI on Windows -- PostScript on UNIX, PostScript and Ghostscript
    PJL, Network PostScript RIP: CUPS Filters on Server -- clients use -PostScript Driver with CUPS-PPDs, Benefits of using "CUPS PostScript Driver for -Windows NT/2k/XP" instead of Adobe Driver, Adobe and CUPS PostScript Drivers for Windows Clients
    point and print, Driver Installation Methods on Windows Clients, Three familiar Methods for driver upload plus a new one, cupsomatic/Foomatic -- how do they fit into the Picture?, Run "cupsaddsmb" (quiet Mode), Installing the PostScript Driver on a Client, Manual Driver Installation in 15 Steps
    PostScript, Using CUPS/Samba in an advanced Way -- intelligent printing -with PostScript Driver Download, GDI on Windows -- PostScript on UNIX, UNIX Printfile Conversion and GUI Basics, PostScript and Ghostscript, Prefilters, Driver Execution on the Server, Network PostScript RIP: CUPS Filters on Server -- clients use -PostScript Driver with CUPS-PPDs, CUPS: a "Magical Stone"?, CUPS Package of "PostScript Driver for WinNT/2k/XP"
    (see also Ghostscript)
    RIP, PostScript and Ghostscript
    PPD, PostScript and Ghostscript, PostScript Printer Description (PPD) Specification, PostScript Printer Descriptions (PPDs) for non-PS Printers, PPDs for non-PS Printers on UNIX, PPDs for non-PS Printers on Windows, CUPS: a "Magical Stone"?, Installing the PostScript Driver on a Client
    CUPS (see CUPS-PPD)
    preferred master, What is Browsing?, Setting up WORKGROUP Browsing, Forcing Samba to be the master, Making Samba the domain master, The tests
    preserve case, Windows 9x / Me Profile Setup
    print command, Parameters Recommended for Use, The [global] Section, Default Print Commands for various UNIX Print Subsystems, Setting up your own Print Commands, Linking of smbd with libcups.so, From Windows Clients to a CUPS/Samba Print Server, Pre-conditions, Manual Configuration
    print ok , Parameters Recommended for Use
    printable, Parameters Recommended for Use, The [printers] Section, Any [my_printer_name] Section
    printcap, Parameters Recommended for Use, Default Print Commands for various UNIX Print Subsystems, Basic Configuration of CUPS support, Linking of smbd with libcups.so, More complex smb.conf Settings for -CUPS, From Windows Clients to a CUPS/Samba Print Server, Pre-conditions
    printcap name, Parameters Recommended for Use, The [global] Section
    printer, Parameters Recommended for Use
    printer admin, Parameters Recommended for Use, The [global] Section, Any [my_printer_name] Section, Parameters in the [print$] Section, Setting Drivers for existing Printers with a Client GUI, IMPORTANT! Setting Device Modes on new Printers, Always make first Client Connection as root or "printer admin", Setting Default Print Options for the Client Drivers, Adding new Printers with the Windows NT APW, More complex smb.conf Settings for -CUPS, What is required for adddriver and setdriver to succeed, Print options for all users can't be set on Win2K/XP
    printer name, Parameters Recommended for Use
    printing, Parameters Recommended for Use, The [global] Section, Default Print Commands for various UNIX Print Subsystems, Setting up your own Print Commands, Basic Configuration of CUPS support, Linking of smbd with libcups.so, More complex smb.conf Settings for -CUPS, From Windows Clients to a CUPS/Samba Print Server, Pre-conditions, Manual Configuration
    printing.tdb, The printing *.tdb Files
    (see also TDB)
    PrintPro (see ESP Print Pro)
    public, The [printers] Section

    R

    read list, User and Group Based Controls
    read only, Miscellaneous Controls, The [printers] Section, Parameters in the [print$] Section
    read raw, Read raw
    read size, Read size
    remote announce, NetBIOS over TCP/IP, How Browsing Functions, Use of the Remote Announce parameter, Browsing support in Samba
    remote browse sync, NetBIOS over TCP/IP, How Browsing Functions, Use of the Remote Browse Sync parameter
    root preexec, Logon Scripts
    rpcclient
    adddriver, Run "cupsaddsmb" with verbose Output, Understanding cupsaddsmb, Installing PostScript Driver Files manually (using -rpcclient), Understanding the rpcclient man page, What is required for adddriver and setdriver to succeed, Manual Driver Installation in 15 Steps
    enumdrivers, Installing PostScript Driver Files manually (using -rpcclient), Manual Driver Installation in 15 Steps
    enumports, Installing PostScript Driver Files manually (using -rpcclient)
    enumprinters, Installing PostScript Driver Files manually (using -rpcclient), What is required for adddriver and setdriver to succeed, Manual Driver Installation in 15 Steps, Troubleshooting revisited
    getdriver, Producing an Example by querying a Windows Box, Manual Driver Installation in 15 Steps
    getprinter, Producing an Example by querying a Windows Box, Manual Driver Installation in 15 Steps, Troubleshooting revisited
    setdriver, Caveats to be considered, Run "cupsaddsmb" with verbose Output, Understanding cupsaddsmb, Installing PostScript Driver Files manually (using -rpcclient), What is required for adddriver and setdriver to succeed, Manual Driver Installation in 15 Steps
    rsync, Accessing the samba sources via rsync and ftp

    S

    secrets.tdb, The printing *.tdb Files
    (see also TDB)
    security, Samba Security Modes, Domain Security Mode (User Level Security), Server Security (User Level Security), What makes Samba a SERVER?, What makes Samba a Domain Controller?, What makes Samba a Domain Member?, Constantly Losing Connections to Password Server, Preparing for Domain Control, Security Mode and Master Browsers, Joining an NT4 type Domain with Samba-3, Why is this better than security = server?, Setup your smb.conf, Run "cupsaddsmb" (quiet Mode), "cupsaddsmb" keeps asking for root password in - neverending loop, Passdb Backends and Authentication, The tests, Configuring WfW password handling
    security mask, File and Directory Permissions Based Controls, Interaction with the standard Samba create mask - parameters
    Server Manager, MS Windows Workstation/Server Machine Trust Accounts, Manual Creation of Machine Trust Accounts
    sessionid.tdb, The printing *.tdb Files
    (see also TDB)
    share_info.tdb, The printing *.tdb Files
    (see also TDB)
    short preserve case, Miscellaneous Controls, Windows 9x / Me Profile Setup
    Short-Cuts, MS Windows NTFS Comparison with UNIX File Systems
    show add printer wizard, Parameters Recommended for Use, The [global] Section, Adding new Printers with the Windows NT APW
    SID, Features and Benefits
    Single Sign On, Caveats to be considered
    smbclient, Testing with smbclient, The tests
    socket options, Socket options
    spooling
    central, Central spooling vs. "Peer-to-Peer" printing
    peer-to-peer, Central spooling vs. "Peer-to-Peer" printing
    spooling-only, CUPS/Samba as a "spooling-only" Print Server; "raw" printing -with Vendor Drivers on Windows Clients
    strict locking, Discussion
    + +

  • + + Samba 2.0.x Troubleshooting guide from Paul Green + +

  • + + Ten Years of Samba + +

  • + + Samba Authenticated Gateway HOWTO + +

  • + + An Introduction to Samba + +

  • + + What is CIFS? + +

  • + + WFWG: Password Caching and How It Affects LAN Manager + Security at Microsoft Knowledge Base + +

  • Related updates from Microsoft

    • + + Enhanced Encryption for Windows 95 Password Cache + +

    • + + Windows '95 File Sharing Updates + +

    • + + Windows for Workgroups Sharing Updates + +

    Index

    D

    daemon, Alternative: Starting smbd as a Daemon
    DDK, PostScript Drivers with No Major Problems Even in Kernel +Mode, CUPS PostScript Driver for Windows NT/200x/XP
    debug, Internal Errors
    debug level, Debugging with Samba Itself, Log Level
    debuglevel, Debug Levels
    default case, Miscellaneous Controls
    default profile, Default Profile for Windows Users, Changing the Default Profile
    delete printer command, Adding New Printers with the Windows NT APW
    delete roaming profiles, MS Windows 200x/XP
    DHCP, Background Information
    diff, Patches
    directory mask, File and Directory Permissions-Based Controls
    directory security mask, Interaction with the Standard Samba create mask Parameters
    Directory Separators, MS Windows NTFS Comparison with UNIX File Systems
    display charset, Samba and Charsets, Enabling SWAT Internationalization Support
    DNS, TCP/IP without NetBIOS, DNS Lookup
    Active Directory, DNS and Active Directory
    Dynamic, Background Information
    dns proxy, What Is Browsing?
    domain admin group, Group Mapping MS Windows and UNIX
    Domain Admins group, Discussion
    domain logons, Preparing for Domain Control
    domain master, Domain Network Logon Service, Example Configuration, What Is Browsing?, Making Samba the Domain Master
    Domain Member, Domain Security Mode (User Level Security)
    joining, Example Configuration
    domain security, Features and Benefits
    Domain Users group, Adding Domain Users to the Power Users Group
    dont descend, Miscellaneous Controls
    dos charset, Samba and Charsets, Japanese Charsets, CP850.so Can't Be Found
    dos filemode, File and Directory Permissions-Based Controls
    dos filetime resolution, Miscellaneous Controls
    dos filetimes, Miscellaneous Controls
    Drive Identification, MS Windows NTFS Comparison with UNIX File Systems

    F

    fake oplocks, Miscellaneous Controls
    File Naming Conventions, MS Windows NTFS Comparison with UNIX File Systems
    File System, MS Windows NTFS Comparison with UNIX File Systems
    case sensitivity, MS Windows NTFS Comparison with UNIX File Systems
    feature comparison, MS Windows NTFS Comparison with UNIX File Systems
    UNIX, MS Windows NTFS Comparison with UNIX File Systems
    Windows, MS Windows NTFS Comparison with UNIX File Systems
    flush name cache, How Can One Flush the Samba NetBIOS Name Cache without Restarting Samba?
    foomatic, Using Windows-Formatted Vendor PPDs, The CUPS Filtering Architecture, The Role of cupsomatic/foomatic, cupsomatic/foomatic-rip Versus native CUPS Printing, foomatic-rip and Foomatic Explained, Foomatic's Strange Name
    foomatic-rip, cupsomatic/foomatic-rip Versus native CUPS Printing, CUPS Print Drivers from Linuxprinting.org, foomatic-rip and Foomatic Explained, The Grand Unification Achieved
    force create mode, File and Directory Permissions-Based Controls, Interaction with the Standard Samba create mask Parameters
    force directory mode, File and Directory Permissions-Based Controls, Interaction with the Standard Samba create mask Parameters
    force directory security mode, File and Directory Permissions-Based Controls, Interaction with the Standard Samba create mask Parameters
    force group, User and Group-Based Controls
    force security mode, File and Directory Permissions-Based Controls, Interaction with the Standard Samba create mask Parameters
    force user, User and Group-Based Controls, File Operations Done as root with force user Set, Beware of Force User
    ftp, Accessing the Samba Sources via rsync and ftp

    L

    ldap admin dn, Backup Domain Controller Configuration, Sharing User ID Mappings between Samba Domain Members, Configuring Samba
    ldap delete dn, Configuring Samba
    ldap filter, Configuring Samba
    ldap group suffix, Configuring Samba
    ldap idmap suffix, Backup Domain Controller Configuration, Sharing User ID Mappings between Samba Domain Members, Configuring Samba
    ldap machine suffix, Configuring Samba
    ldap passwd sync, Configuring Samba, Password Synchronization
    ldap ssl, Configuring Samba, Security and sambaSamAccount
    ldap suffix, Backup Domain Controller Configuration, Configuring Samba
    ldap user suffix, Configuring Samba
    libnss_wins.so, /etc/nsswitch.conf
    Links
    hard, MS Windows NTFS Comparison with UNIX File Systems
    soft, MS Windows NTFS Comparison with UNIX File Systems
    Linuxprinting.org, CUPS Print Drivers from Linuxprinting.org
    lm announce, What Is Browsing?
    lm interval, What Is Browsing?
    LMB (see Local Master Browser)
    LMHOSTS, The LMHOSTS File
    load printers, Rapid Configuration Validation, The [global] Section
    local master, What Is Browsing?, Configuring WORKGROUP Browsing
    Local Master Browser, NetBIOS over TCP/IP, Use of the Remote Announce Parameter
    locking, Discussion
    locking.tdb, The Printing *.tdb Files
    (see also TDB)
    log files
    monitoring, Assumptions
    log level, Adding Machine to Domain Fails, Problem Resolution, extd_audit, Debug Levels
    logon drive, Windows NT4 Workstation
    logon home, LDAP Special Attributes for sambaSamAccounts, Windows 9x/Me User Profiles, Mixed Windows 9x/Me and Windows NT4/200x User Profiles, Disabling Roaming Profile Support, Windows NT4 Workstation, Sharing Profiles between W9x/Me and NT4/200x/XP Workstations
    logon path, LDAP Special Attributes for sambaSamAccounts, Mixed Windows 9x/Me and Windows NT4/200x User Profiles, Disabling Roaming Profile Support, Windows 9x/Me Profile Setup, Windows NT4 Workstation, Sharing Profiles between W9x/Me and NT4/200x/XP Workstations
    logon script, LDAP Special Attributes for sambaSamAccounts
    lpadmin, CUPS Print Drivers from Linuxprinting.org, Setting Up Quotas
    lppause command, Linking smbd with libcups.so, From Windows Clients to a CUPS/Samba Print Server, Pre-Conditions
    lpq cache time, The [global] Section
    lpq command, Linking smbd with libcups.so, Pre-Conditions
    lpresume command, Linking smbd with libcups.so, Pre-Conditions
    lprm command, Linking smbd with libcups.so, Pre-Conditions
    lpstat, Troubleshooting Revisited

    P

    page_log, The page_log File Syntax
    passdb backend, MS Windows Workstation/Server Machine Trust Accounts, Account Information Databases, Technical Information, The pdbedit Command, Configuring Samba, Configuring, Users Cannot Logon, Configuration of auth methods, Remote CIFS Authentication Using winbindd.so, Quick Migration Guide, Passdb Backends and Authentication
    password level, Password Checking, The Tests, Password Case Sensitivity, Slow Logins
    password server, Server Security (User Level Security), Security Mode and Master Browsers, Joining an NT4-type Domain with Samba-3, Configure smb.conf, The Tests
    patch, Patches
    path, The [printers] Section, Any [my_printer_name] Section, Print Commands, Creating the [print$] Share, [print$] Section Parameters, The [print$] Share Directory, Samba Receiving Jobfiles and Passing Them to CUPS, Auto-Deletion or Preservation of CUPS Spool Files, Permissions on /var/spool/samba/ Get Reset After Each Reboot, The Tests
    PCL, GDI on Windows -- PostScript on UNIX, Windows Drivers, GDI and EMF, UNIX Printfile Conversion and GUI Basics, Driver Execution on the Server, Network PostScript RIP
    pdbedit, New Backends, Account Management Tools, The pdbedit Command, XML, Passdb Backends and Authentication, Steps in Migration Process, Samba-3 Implementation Choices
    PDF, Windows Drivers, GDI and EMF, PostScript Printer Description (PPD) Specification
    pdf, MIME Type Conversion Rules
    PDL, GDI on Windows -- PostScript on UNIX, PostScript and Ghostscript
    permissions
    file/directory ACLs, Managing UNIX Permissions Using NT Security Dialogs
    share, Share Definition Access Controls
    share ACLs, Access Controls on Shares
    UNIX file and directory, Features and Benefits
    PGP, Verifying Samba's PGP Signature
    PJL, Network PostScript RIP, Windows CUPS PostScript Driver Versus Adobe Driver, Adobe and CUPS PostScript Drivers for Windows Clients
    point 'n' print, Installation of Windows Client Drivers, Driver Upload Methods, The Role of cupsomatic/foomatic, Run cupsaddsmb (Quiet Mode), Installing the PostScript Driver on a Client, Manual Driver Installation in 15 Steps
    PostScript, Advanced Intelligent Printing with PostScript Driver Download, GDI on Windows -- PostScript on UNIX, Windows Drivers, GDI and EMF, UNIX Printfile Conversion and GUI Basics, PostScript and Ghostscript, Prefilters, Driver Execution on the Server, Network PostScript RIP, CUPS: A Magical Stone?, CUPS PostScript Driver for Windows NT/200x/XP
    (see also Ghostscript)
    RIP, PostScript and Ghostscript
    PPD, PostScript and Ghostscript, PostScript Printer Description (PPD) Specification, PostScript Printer Descriptions (PPDs) for Non-PS Printers, PPDs for Non-PS Printers on UNIX, PPDs for Non-PS Printers on Windows, CUPS: A Magical Stone?, Installing the PostScript Driver on a Client
    CUPS (see CUPS-PPD)
    preferred master, What Is Browsing?, Configuring WORKGROUP Browsing, Forcing Samba to Be the Master, Making Samba the Domain Master, The Tests
    preserve case, Windows 9x/Me Profile Setup
    print command, The [global] Section, Default UNIX System Printing Commands, Custom Print Commands, Linking smbd with libcups.so, From Windows Clients to a CUPS/Samba Print Server, Pre-Conditions, Manual Configuration
    printable, The [printers] Section, Any [my_printer_name] Section
    printcap, Default UNIX System Printing Commands, Basic CUPS Support Configuration, Linking smbd with libcups.so, More Complex CUPS smb.conf Settings, Pre-Conditions
    printcap name, The [global] Section
    printer admin, The [global] Section, Any [my_printer_name] Section, [print$] Section Parameters, Add Printer Wizard Driver Installation, First Client Driver Installation, Setting Device Modes on New Printers, Always Make First Client Connection as root or printer admin, Setting Default Print Options for Client Drivers, Adding New Printers with the Windows NT APW, More Complex CUPS smb.conf Settings, Requirements for adddriver and setdriver to Succeed, Print Options for All Users Can't Be Set on Windows 200x/XP
    printing, The [global] Section, Default UNIX System Printing Commands, Custom Print Commands, Basic CUPS Support Configuration, Linking smbd with libcups.so, More Complex CUPS smb.conf Settings, From Windows Clients to a CUPS/Samba Print Server, Pre-Conditions, Manual Configuration
    printing.tdb, The Printing *.tdb Files
    (see also TDB)
    PrintPro (see ESP Print Pro)
    public, The [printers] Section

    Q

    queue resume command, Linking smbd with libcups.so
    queuepause command, Linking smbd with libcups.so

    R

    raw printing, Central Print Serving, Explicitly Enable raw Printing for application/octet-stream
    read list, User and Group-Based Controls
    read only, Miscellaneous Controls, The [printers] Section, [print$] Section Parameters
    read raw, Read Raw
    read size, Read Size
    Relative Identifier (see RID)
    remote announce, NetBIOS over TCP/IP, How Browsing Functions, Use of the Remote Announce Parameter, Browsing Support in Samba
    remote browse sync, NetBIOS over TCP/IP, How Browsing Functions, Use of the Remote Browse Sync Parameter
    replication, Features and Benefits
    browse lists, Cross-Subnet Browsing
    SAM, Domain Controller Types, Features and Benefits, MS Windows NT4-style Domain Control, Backup Domain Controller Configuration, Can Samba Be a Backup Domain Controller to an NT4 PDC?, How Do I Replicate the smbpasswd File?
    WINS, NetBIOS over TCP/IP, WINS Server Configuration, WINS Replication
    RID, Default Users, Groups and Relative Identifiers
    roaming profiles, Disabling Roaming Profile Support
    root preexec, Logon Scripts
    rpcclient
    adddriver, Run cupsaddsmb with Verbose Output, Understanding cupsaddsmb, Installing PostScript Driver Files Manually Using rpcclient, Understanding the rpcclient man Page, Requirements for adddriver and setdriver to Succeed, Manual Driver Installation in 15 Steps
    enumdrivers, Installing PostScript Driver Files Manually Using rpcclient, Manual Driver Installation in 15 Steps
    enumports, Installing PostScript Driver Files Manually Using rpcclient
    enumprinters, Installing PostScript Driver Files Manually Using rpcclient, Requirements for adddriver and setdriver to Succeed, Manual Driver Installation in 15 Steps, Troubleshooting Revisited
    getdriver, Producing an Example by Querying a Windows Box, Manual Driver Installation in 15 Steps
    getprinter, Producing an Example by Querying a Windows Box, Manual Driver Installation in 15 Steps, Troubleshooting Revisited
    setdriver, Caveats to be Considered, Run cupsaddsmb with Verbose Output, Understanding cupsaddsmb, Installing PostScript Driver Files Manually Using rpcclient, Requirements for adddriver and setdriver to Succeed, Manual Driver Installation in 15 Steps
    rsync, Accessing the Samba Sources via rsync and ftp
    rundll32, Adding Printers without User Intervention

    S

    SAM, Features and Benefits, Domain Controller Types, Features and Benefits, Result Caching
    SAM backend
    LDAP, Features and Benefits
    ldapsam, Features and Benefits, Features and Benefits, Mapping Common UIDs/GIDs on Distributed Machines, ldapsam
    ldapsam_compat, Features and Benefits
    mysqlsam, Features and Benefits, MySQL
    non-LDAP, Features and Benefits
    smbpasswd, Features and Benefits, smbpasswd Encrypted Password Database
    tdbsam, Features and Benefits, Features and Benefits, tdbsam
    xmlsam, Features and Benefits, Mapping Common UIDs/GIDs on Distributed Machines, XML
    schannel, Cannot Log onto Domain Member Workstation After Joining Domain
    secrets.tdb, The Printing *.tdb Files
    (see also TDB)
    security, Samba Security Modes, Domain Security Mode (User Level Security), Server Security (User Level Security), What Makes Samba a Server?, What Makes Samba a Domain Controller?, What Makes Samba a Domain Member?, Constantly Losing Connections to Password Server, Preparing for Domain Control, Security Mode and Master Browsers, Joining an NT4-type Domain with Samba-3, Why Is This Better Than security = server?, Configure smb.conf, Run cupsaddsmb (Quiet Mode), cupsaddsmb Keeps Asking for Root Password in Never-ending Loop, Passdb Backends and Authentication, The Tests, Configuring Windows for Workgroups Password Handling
    security mask, File and Directory Permissions-Based Controls, Interaction with the Standard Samba create mask Parameters
    Security Mode, Samba Security Modes
    Server Manager, MS Windows Workstation/Server Machine Trust Accounts, Manual Creation of Machine Trust Accounts, Remote Server Administration
    Server Type, Server Types
    Domain Member, Example Configuration, Example Configuration, Features and Benefits
    sessionid.tdb, The Printing *.tdb Files
    (see also TDB)
    share_info.tdb, The Printing *.tdb Files
    (see also TDB)
    short preserve case, Miscellaneous Controls, Windows 9x/Me Profile Setup
    Short-Cuts, MS Windows NTFS Comparison with UNIX File Systems
    show add printer wizard, The [global] Section, Adding New Printers with the Windows NT APW
    SID, Features and Benefits, The System Cannot Log You On (C000019B), Backup Domain Controller Configuration, Technical Information, Features and Benefits, Side Bar Notes, Get SID, Profile Migration/Creation
    signing, Cannot Log onto Domain Member Workstation After Joining Domain
    simple configuration, Example Configuration
    Single Sign On, Caveats to be Considered
    slow browsing, Browsing of Shares and Directories is Very Slow
    smbclient, Testing with smbclient, The Tests
    smbgrpadd.sh, Sample smb.conf Add Group Script
    socket options, Socket Options
    spooling
    central, Central Spooling vs. Peer-to-Peer Printing
    peer-to-peer, Central Spooling vs. Peer-to-Peer Printing
    spooling-only, Raw Print Serving Vendor Drivers on Windows Clients
    SRVTOOLS.EXE, Managing Domain Machine Accounts using NT4 Server Manager, Remote Server Administration
    strict locking, Discussion
    swat, SWAT
    enable, Enabling SWAT for Use
    security, Securing SWAT through SSL
    System Policy Editor, Creating and Managing System Policies, Administration of Windows 200x/XP Policies
    diff --git a/docs/htmldocs/SambaHA.html b/docs/htmldocs/SambaHA.html index 39ab6b91d8..7104c8041b 100644 --- a/docs/htmldocs/SambaHA.html +++ b/docs/htmldocs/SambaHA.html @@ -1,4 +1,4 @@ -Chapter 29. High Availability Options

    Chapter 29. High Availability Options

    John H. Terpstra

    Samba Team

    Table of Contents

    Note

    Note

    +Chapter 29. High Availability Options

    Chapter 29. High Availability Options

    John H. Terpstra

    Samba Team

    Table of Contents

    Note

    Note

    This chapter did not make it into this release. It is planned for the published release of this document. -

    +

    diff --git a/docs/htmldocs/ServerType.html b/docs/htmldocs/ServerType.html index 7b5b7117a6..77a2937d95 100644 --- a/docs/htmldocs/ServerType.html +++ b/docs/htmldocs/ServerType.html @@ -1,92 +1,93 @@ -Chapter 4. Server Types and Security Modes

    Chapter 4. Server Types and Security Modes

    Andrew Tridgell

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    +Chapter 4. Server Types and Security Modes

    Chapter 4. Server Types and Security Modes

    Andrew Tridgell

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    This chapter provides information regarding the types of server that Samba may be -configured to be. A Microsoft network administrator who wishes to migrate to or to -use Samba will want to know what, within a Samba context, terms familiar to MS Windows -administrator mean. This means that it is essential also to define how critical security -modes function BEFORE we get into the details of how to configure the server itself. +configured to be. A Microsoft network administrator who wishes to migrate to or +use Samba will want to know the meaning, within a Samba context, of terms familiar to MS Windows +administrator. This means that it is essential also to define how critical security +modes function before we get into the details of how to configure the server itself.

    The chapter provides an overview of the security modes of which Samba is capable -and how these relate to MS Windows servers and clients. +and how they relate to MS Windows servers and clients.

    -A question often asked is, "Why would I want to use Samba?" Most chapters contain a section +A question often asked is, “Why would I want to use Samba?” Most chapters contain a section that highlights features and benefits. We hope that the information provided will help to answer this question. Be warned though, we want to be fair and reasonable, so not all -features are positive towards Samba so the benefit may be on the side of our competition. -

    Features and Benefits

    +features are positive towards Samba. The benefit may be on the side of our competition. +

    Features and Benefits

    Two men were walking down a dusty road, when one suddenly kicked up a small red stone. It hurt his toe and lodged in his sandal. He took the stone out and cursed it with a passion -and fury fitting his anguish. The other looked at the stone and said, that is a garnet - I -can turn that into a precious gem and some day it will make a princess very happy! +and fury befitting his anguish. The other looked at the stone and said, “This is a garnet. +I can turn that into a precious gem and some day it will make a princess very happy!

    The moral of this tale: Two men, two very different perspectives regarding the same stone. Like it or not, Samba is like that stone. Treat it the right way and it can bring great -pleasure, but if you are forced upon it and have no time for its secrets then it can be +pleasure, but if you are forced to use it and have no time for its secrets, then it can be a source of discomfort.

    Samba started out as a project that sought to provide interoperability for MS Windows 3.x clients with a UNIX server. It has grown up a lot since its humble beginnings and now provides features and functionality fit for large scale deployment. It also has some warts. In sections -like this one we will tell of both. +like this one we tell of both.

    -So now, what are the benefits of features mentioned in this chapter? +So, what are the benefits of features mentioned in this chapter?

    • - Samba-3 can replace an MS Windows NT4 Domain Controller + Samba-3 can replace an MS Windows NT4 Domain Controller.

    • - Samba-3 offers excellent interoperability with MS Windows NT4 - style domains as well as natively with Microsoft Active - Directory domains. + Samba-3 offers excellent interoperability with MS Windows NT4-style + domains as well as natively with Microsoft Active Directory domains.

    • - Samba-3 permits full NT4 style Interdomain Trusts + Samba-3 permits full NT4-style Interdomain Trusts.

    • Samba has security modes that permit more flexible authentication than is possible with MS Windows NT4 Domain Controllers.

    • - Samba-3 permits use of multiple account database backends + Samba-3 permits use of multiple account database backends.

    • The account (password) database backends can be distributed and replicated using multiple methods. This gives Samba-3 greater flexibility than MS Windows NT4 and in many cases a significantly higher utility than Active Directory domains with MS Windows 200x. -

    Server Types

    Administrators of Microsoft networks often refer to three -different type of servers:

    • Domain Controller

      • Primary Domain Controller

      • Backup Domain Controller

      • ADS Domain Controller

    • Domain Member Server

      • Active Directory Domain Server

      • NT4 Style Domain Domain Server

    • Stand Alone Server

    +

    Server Types

    + +Administrators of Microsoft networks often refer to three +different type of servers:

    • Domain Controller

      • Primary Domain Controller
      • Backup Domain Controller
      • ADS Domain Controller
    • Domain Member Server

      • Active Directory Domain Server
      • NT4 Style Domain Domain Server
    • Stand-alone Server

    The chapters covering Domain Control, Backup Domain Control and Domain Membership provide pertinent information regarding Samba configuration for each of these server roles. The reader is strongly encouraged to become intimately familiar with the information presented. -

    Samba Security Modes

    -In this section the function and purpose of Samba's security +

    Samba Security Modes

    + + +In this section the function and purpose of Samba's security modes are described. An accurate understanding of how Samba implements each security mode as well as how to configure MS Windows clients for each mode will significantly reduce user complaints and administrator heartache.

    -In the SMB/CIFS networking world, there are only two types of security: USER Level -and SHARE Level. We refer to these collectively as security levels. In implementing these two security levels Samba provides flexibilities -that are not available with Microsoft Windows NT4 / 200x servers. Samba knows of five (5) -ways that allow the security levels to be implemented. In actual fact, Samba implements -SHARE Level security only one way, but has four ways of implementing -USER Level security. Collectively, we call the Samba implementations -Security Modes. These are: SHARE, USER, DOMAIN, -ADS, and SERVER -modes. They are documented in this chapter. +In the SMB/CIFS networking world, there are only two types of security: User Level +and Share Level. We refer to these collectively as security levels. +In implementing these two security levels, Samba provides flexibilities +that are not available with Microsoft Windows NT4/200x servers. In actual fact, Samba implements +Share Level security only one way, but has four ways of implementing +User Level security. Collectively, we call the Samba implementations +Security Modes. They are known as: SHARE, USER, +DOMAIN, ADS, and SERVER modes. +They are documented in this chapter.

    - A SMB server tells the client at startup what security level -it is running. There are two options: share level and -user level. Which of these two the client receives affects -the way the client then tries to authenticate itself. It does not directly affect -(to any great extent) the way the Samba server does security. This may sound strange, -but it fits in with the client/server approach of SMB. In SMB everything is initiated -and controlled by the client, and the server can only tell the client what is -available and whether an action is allowed. -

    User Level Security

    -We will describe user level security first, as it's simpler. -In user level security, the client will send a -session setup command directly after the protocol negotiation. -This contains a username and password. The server can either accept or reject that -username/password combination. Note that at this stage the server has no idea what +An SMB server tells the client at startup what security level it is running. There are two options: +Share Level and User Level. Which of these two the client receives affects the way the client then +tries to authenticate itself. It does not directly affect (to any great extent) the way the Samba +server does security. This may sound strange, but it fits in with the client/server approach of SMB. +In SMB everything is initiated and controlled by the client, and the server can only tell the client +what is available and whether an action is allowed. +

    User Level Security

    +We will describe User Level Security first, as its simpler. +In User Level Security, the client will send a +session setup request directly following protocol negotiation. +This request provides a username and password. The server can either accept or reject that +username/password combination. At this stage the server has no idea what share the client will eventually try to connect to, so it can't base the accept/reject on anything other than: -

    1. The username/password

    2. The name of the client machine

    +

    1. the username/password.

    2. the name of the client machine.

    If the server accepts the username/password then the client expects to be able to mount shares (using a tree connection) without specifying a password. It expects that all access rights will be as the username/password @@ -96,53 +97,57 @@ It is also possible for a client to send multiple ses requests. When the server responds, it gives the client a uid to use as an authentication tag for that username/password. The client can maintain multiple authentication contexts in this way (WinDD is an example of an application that does this). -

    Example Configuration

    -The smb.conf parameter that sets User Level Security is: +

    Example Configuration

    +The smb.conf parameter that sets user level security is:

    security = user

    -This is the default setting since samba-2.2.x. -

    Share Level Security

    -Ok, now for share level security. In share level security, the client authenticates -itself separately for each share. It will send a password along with each -tree connection (share mount). It does not explicitly send a +This is the default setting since Samba-2.2.x. +

    Share Level Security

    +In Share Level security, the client authenticates +itself separately for each share. It sends a password along with each +tree connection (share mount). It does not explicitly send a username with this operation. The client expects a password to be associated with each share, independent of the user. This means that Samba has to work out what username the client probably wants to use. It is never explicitly sent the username. Some commercial SMB servers such as NT actually associate passwords directly with -shares in share level security, but Samba always uses the unix authentication scheme +shares in Share Level security, but Samba always uses the UNIX authentication scheme where it is a username/password pair that is authenticated, not a share/password pair.

    -To gain understanding of the MS Windows networking parallels to this, one should think +To understand the MS Windows networking parallels, one should think in terms of MS Windows 9x/Me where one can create a shared folder that provides read-only or full access, with or without a password.

    -Many clients send a session setup even if the server is in share -level security. They normally send a valid username but no password. Samba records -this username in a list of possible usernames. When the client -then does a tree connection it also adds to this list the name +Many clients send a session setup even if the server is in Share Level security. They +normally send a valid username but no password. Samba records this username in a list +of possible usernames. When the client then does a tree connection it also adds to this list the name of the share they try to connect to (useful for home directories) and any users -listed in the user smb.conf line. The password is then checked -in turn against these possible usernames. If a match is found +listed in the user parameter in the smb.conf file. +The password is then checked in turn against these possible usernames. If a match is found then the client is authenticated as that user. -

    Example Configuration

    -The smb.conf parameter that sets Share Level Security is: +

    Example Configuration

    +The smb.conf parameter that sets Share Level security is:

    security = share

    -Please note that there are reports that recent MS Windows clients do not like to work -with share mode security servers. You are strongly discouraged from using share level security. -

    Domain Security Mode (User Level Security)

    -When Samba is operating in security = domain mode, -the Samba server has a domain security trust account (a machine account) and will cause -all authentication requests to be passed through to the domain controllers. -

    Example Configuration

    +There are reports that recent MS Windows clients do not like to work +with share mode security servers. You are strongly discouraged from using Share Level security. +

    Domain Security Mode (User Level Security)

    + +When Samba is operating in security = domain mode, +the Samba server has a domain security trust account (a machine account) and causes +all authentication requests to be passed through to the Domain Controllers. +In other words, this configuration makes the Samba server a Domain Member server. +

    Example Configuration

    Samba as a Domain Member Server

    + This method involves addition of the following parameters in the smb.conf file:

    security = domain
    workgroup = MIDEARTH

    In order for this method to work, the Samba server needs to join the MS Windows NT security domain. This is done as follows: -

    1. On the MS Windows NT domain controller, using + + +

      1. On the MS Windows NT Domain Controller, using the Server Manager, add a machine account for the Samba server. -

      2. Next, on the UNIX/Linux system execute:

        root# net rpc join -U administrator%password

      Note

      -Samba-2.2.4 and later can auto-join a Windows NT4 style Domain just by executing: +

    2. On the UNIX/Linux system execute:

      root# net rpc join -U administrator%password

    Note

    +Samba-2.2.4 and later can auto-join a Windows NT4-style Domain just by executing:

     root# smbpasswd -j DOMAIN_NAME -r PDC_NAME \
     	 -U Administrator%password
    @@ -157,97 +162,97 @@ It is not necessary with Samba-3 to specify the DOMAI
     

    Use of this mode of authentication does require there to be a standard UNIX account for each user in order to assign a UID once the account has been authenticated by -the remote Windows DC. This account can be blocked to prevent logons by clients other than +the remote Windows DC. This account can be blocked to prevent logons by clients other than MS Windows through means such as setting an invalid shell in the /etc/passwd entry.

    An alternative to assigning UIDs to Windows users on a Samba member server is -presented in the chapter about winbind. +presented in .

    - For more information of being a domain member, see the chapter about domain membership. -

    ADS Security Mode (User Level Security)

    -Both Samba 2.2 and 3.0 can join an Active Directory domain. This is +For more information regarding Domain Membership, see . +

    ADS Security Mode (User Level Security)

    +Both Samba-2.2, and Samba-3 can join an Active Directory domain. This is possible if the domain is run in native mode. Active Directory in -native mode perfectly allows NT4-style domain members. This is contrary to -popular belief. The only thing that Active Directory in native mode -prohibits is Backup Domain Controllers running NT4. +native mode perfectly allows NT4-style Domain Members. This is contrary to +popular belief. Active Directory in native mode prohibits only the use of +Backup Domain Controllers running MS Windows NT4.

    If you are using Active Directory, starting with Samba-3 you can join as a native AD member. Why would you want to do that? Your security policy might prohibit the use of NT-compatible authentication protocols. All your machines are running Windows 2000 -and above and all use Kerberos. In this case Samba as a NT4-style +and above and all use Kerberos. In this case Samba as an NT4-style domain would still require NT-compatible authentication data. Samba in AD-member mode can accept Kerberos tickets. -

    Example Configuration

    realm = your.kerberos.REALM
    security = ADS

    +

    Example Configuration

    realm = your.kerberos.REALM
    security = ADS

    The following parameter may be required: -

    ads server = your.kerberos.server

    -Please refer to the chapter on domain membership +

    password server = your.kerberos.server

    +Please refer to and for more information regarding this configuration option. -

    Server Security (User Level Security)

    -Server security mode is a left over from the time when Samba was not capable of acting -as a domain member server. It is highly recommended NOT to use this feature. Server -security mode has many draw backs. The draw backs include: -

    • Potential Account Lockout on MS Windows NT4/200x password servers

    • Lack of assurance that the password server is the one specified

    • Does not work with Winbind, particularly needed when storing profiles remotely

    • This mode may open connections to the password server, and keep them open for extended periods.

    • Security on the Samba server breaks badly when the remote password server suddenly shuts down

    • With this mode there is NO security account in the domain that the password server belongs to for the Samba server.

    -In server security mode the Samba server reports to the client that it is in user level -security. The client then does a session setup as described earlier. +

    Server Security (User Level Security)

    +Server Security Mode is left over from the time when Samba was not capable of acting +as a Domain Member server. It is highly recommended not to use this feature. Server +security mode has many drawbacks that include: +

    • Potential Account Lockout on MS Windows NT4/200x password servers.

    • Lack of assurance that the password server is the one specified.

    • Does not work with Winbind, which is particularly needed when storing profiles remotely.

    • This mode may open connections to the password server, and keep them open for extended periods.

    • Security on the Samba server breaks badly when the remote password server suddenly shuts down.

    • With this mode there is NO security account in the domain that the password server belongs to for the Samba server.

    +In Server Security Mode the Samba server reports to the client that it is in User Level +security. The client then does a session setup as described earlier. The Samba server takes the username/password that the client sends and attempts to login to the -password server by sending exactly the same username/password that -it got from the client. If that server is in user level security and accepts the password, -then Samba accepts the clients connection. This allows the Samba server to use another SMB -server as the password server. +password server by sending exactly the same username/password that +it got from the client. If that server is in User Level Security and accepts the password, +then Samba accepts the client's connection. This allows the Samba server to use another SMB +server as the password server.

    -You should also note that at the very start of all this, where the server tells the client +You should also note that at the start of all this where the server tells the client what security level it is in, it also tells the client if it supports encryption. If it -does then it supplies the client with a random cryptkey. The client will then send all +does, it supplies the client with a random cryptkey. The client will then send all passwords in encrypted form. Samba supports this type of encryption by default.

    -The parameter security = server means that Samba reports to clients that +The parameter security = server means that Samba reports to clients that it is running in user mode but actually passes off all authentication requests to another user mode server. This requires an additional -parameter password server that points to the real authentication server. -That real authentication server can be another Samba server or can be a Windows NT server, -the later natively capable of encrypted password support. +parameter password server that points to the real authentication server. +The real authentication server can be another Samba server, or it can be a Windows NT server, +the latter being natively capable of encrypted password support.

    Note

    -When Samba is running in server security mode it is essential that +When Samba is running in Server Security Mode it is essential that the parameter password server is set to the precise NetBIOS machine -name of the target authentication server. Samba can NOT determine this from NetBIOS name -lookups because the choice of the target authentication server is arbitrary and can not +name of the target authentication server. Samba cannot determine this from NetBIOS name +lookups because the choice of the target authentication server is arbitrary and cannot be determined from a domain name. In essence, a Samba server that is in -server security mode is operating in what used to be known as +Server Security Mode is operating in what used to be known as workgroup mode. -

    Example Configuration

    -Using MS Windows NT as an authentication server +

    Example Configuration

    +Using MS Windows NT as an Authentication Server

    This method involves the additions of the following parameters in the smb.conf file: -

    encrypt passwords = Yes
    security = server
    password server = "NetBIOS_name_of_a_DC"

    -There are two ways of identifying whether or not a username and password pair was valid. +

    encrypt passwords = Yes
    security = server
    password server = "NetBIOS_name_of_a_DC"

    +There are two ways of identifying whether or not a username and password pair is valid. One uses the reply information provided as part of the authentication messaging process, the other uses just an error code.

    -The down-side of this mode of configuration is the fact that for security reasons Samba +The downside of this mode of configuration is the fact that for security reasons Samba will send the password server a bogus username and a bogus password and if the remote server fails to reject the username and password pair then an alternative mode of identification of validation is used. Where a site uses password lock out after a certain number of failed authentication attempts this will result in user lockouts.

    -Use of this mode of authentication does require there to be a standard UNIX account -for the user, though this account can be blocked to prevent logons by non-SMB/CIFS clients. -

    Password checking

    +Use of this mode of authentication requires a standard UNIX account for the user. +This account can be blocked to prevent logons by non-SMB/CIFS clients. +

    Password Checking

    MS Windows clients may use encrypted passwords as part of a challenge/response -authentication model (a.k.a. NTLMv1 and NTLMv2) or alone, or clear text strings for simple -password based authentication. It should be realized that with the SMB protocol, -the password is passed over the network either in plain text or encrypted, but +authentication model (a.k.a. NTLMv1 and NTLMv2) or alone, or cleartext strings for simple +password-based authentication. It should be realized that with the SMB protocol, +the password is passed over the network either in plain-text or encrypted, but not both in the same authentication request.

    When encrypted passwords are used, a password that has been entered by the user is encrypted in two ways: -

    • An MD4 hash of the UNICODE of the password - string. This is known as the NT hash. +

      • An MD4 hash of the unicode of the password + string. This is known as the NT hash.

      • The password is converted to upper case, - and then padded or truncated to 14 bytes. This string is + and then padded or truncated to 14 bytes. This string is then appended with 5 bytes of NULL characters and split to - form two 56 bit DES keys to encrypt a "magic" 8 byte value. + form two 56-bit DES keys to encrypt a “magic” 8-byte value. The resulting 16 bytes form the LanMan hash.

      MS Windows 95 pre-service pack 1, MS Windows NT versions 3.x and version 4.0 @@ -261,64 +266,65 @@ connection that has been dropped, the client re-establishes the connection using a cached copy of the password.

      When Microsoft changed the default password mode, support was dropped for caching -of the plain text password. This means that when the registry parameter is changed -to re-enable use of plain text passwords it appears to work, but when a dropped -service connection mapping attempts to revalidate it will fail if the remote -authentication server does not support encrypted passwords. This means that it -is definitely not a good idea to re-enable plain text password support in such clients. +of the plain-text password. This means that when the registry parameter is changed +to re-enable use of plain-text passwords it appears to work, but when a dropped +service connection mapping attempts to revalidate, this will fail if the remote +authentication server does not support encrypted passwords. It is definitely not +a good idea to re-enable plain-text password support in such clients.

      -The following parameters can be used to work around the issue of Windows 9x clients -upper casing usernames and password before transmitting them to the SMB server -when using clear text authentication. +The following parameters can be used to work around the issue of Windows 9x/Me clients +upper-casing usernames and passwords before transmitting them to the SMB server +when using cleartext authentication:

      password level = integer
      username level = integer

      -By default Samba will lower case the username before attempting to lookup the user -in the database of local system accounts. Because UNIX usernames conventionally -only contain lower-case character, the username level parameter +By default Samba will convert to lower case the username before attempting to lookup the user +in the database of local system accounts. Because UNIX usernames conventionally +only contain lower-case characters, the username level parameter is rarely needed.

      However, passwords on UNIX systems often make use of mixed-case characters. -This means that in order for a user on a Windows 9x client to connect to a Samba -server using clear text authentication, the password level -must be set to the maximum number of upper case letters which could -appear in a password. Note that if the server OS uses the traditional DES version -of crypt(), a password level of 8 will result in case -insensitive passwords as seen from Windows users. This will also result in longer +This means that in order for a user on a Windows 9x/Me client to connect to a Samba +server using cleartext authentication, the password level +must be set to the maximum number of upper case letters that could +appear in a password. Note that if the server OS uses the traditional DES version +of crypt(), a password level of 8 will result in case +insensitive passwords as seen from Windows users. This will also result in longer login times as Samba has to compute the permutations of the password string and try them one by one until a match is located (or all combinations fail).

      The best option to adopt is to enable support for encrypted passwords wherever -Samba is used. Most attempts to apply the registry change to re-enable plain text +Samba is used. Most attempts to apply the registry change to re-enable plain-text passwords will eventually lead to user complaints and unhappiness. -

    Common Errors

    -We all make mistakes. It is Ok to make mistakes, so long as they are made in the right places -and at the right time. A mistake that causes lost productivity is seldom tolerated. A mistake +

    Common Errors

    +We all make mistakes. It is okay to make mistakes, as long as they are made in the right places +and at the right time. A mistake that causes lost productivity is seldom tolerated, however a mistake made in a developmental test lab is expected.

    Here we look at common mistakes and misapprehensions that have been the subject of discussions -on the Samba mailing lists. Many of these are avoidable by doing you homework before attempting -a Samba implementation. Some are the result of misunderstanding of the English language. The -English language has many turns of phrase that are potentially vague and may be highly confusing +on the Samba mailing lists. Many of these are avoidable by doing your homework before attempting +a Samba implementation. Some are the result of a misunderstanding of the English language. The +English language, which has many phrases that are potentially vague and may be highly confusing to those for whom English is not their native tongue. -

    What makes Samba a SERVER?

    -To some the nature of the Samba security mode is very obvious, but entirely -wrong all the same. It is assumed that security = server means that Samba -will act as a server. Not so! See above - this setting means that Samba will try -to use another SMB server as its source of user authentication alone. -

    What makes Samba a Domain Controller?

    -The smb.conf parameter security = domain does NOT really make Samba behave -as a Domain Controller! This setting means we want Samba to be a domain member! -

    What makes Samba a Domain Member?

    -Guess! So many others do. But whatever you do, do NOT think that security = user -makes Samba act as a domain member. Read the manufacturers manual before the warranty expires! See -the chapter about domain membership for more information. -

    Constantly Losing Connections to Password Server

    +

    What Makes Samba a Server?

    +To some the nature of the Samba security mode is obvious, but entirely +wrong all the same. It is assumed that security = server means that Samba +will act as a server. Not so! This setting means that Samba will try +to use another SMB server as its source for user authentication alone. +

    What Makes Samba a Domain Controller?

    +The smb.conf parameter security = domain does not really make Samba behave +as a Domain Controller. This setting means we want Samba to be a Domain Member. +

    What Makes Samba a Domain Member?

    +Guess! So many others do. But whatever you do, do not think that security = user +makes Samba act as a Domain Member. Read the manufacturer's manual before the warranty expires. See + for more information. +

    Constantly Losing Connections to Password Server

    -Why does server_validate() simply give up rather than re-establishing its connection to the +Why does server_validate() simply give up rather than re-establish its connection to the password server? Though I am not fluent in the SMB protocol, perhaps the cluster server process passes along to its client workstation the session key it receives from the password server, which means the password hashes submitted by the client would not work on a subsequent -connection, whose session key would be different. So server_validate() must give up.” +connection whose session key would be different. So server_validate() must give up.”

    - Indeed. That's why security = server is at best a nasty hack. Please use security = domain. -security = server mode is also known as pass-through authentication. -

    +Indeed. That's why security = server +is at best a nasty hack. Please use security = domain; +security = server mode is also known as pass-through authentication. +

    diff --git a/docs/htmldocs/StandAloneServer.html b/docs/htmldocs/StandAloneServer.html index f85fdfe3fc..78f219911c 100644 --- a/docs/htmldocs/StandAloneServer.html +++ b/docs/htmldocs/StandAloneServer.html @@ -1,85 +1,82 @@ -Chapter 8. Stand-Alone Servers

    Chapter 8. Stand-Alone Servers

    John H. Terpstra

    Samba Team

    -Stand-Alone servers are independent of Domain Controllers on the network. -They are NOT domain members and function more like workgroup servers. In many -cases a stand-alone server is configured with a minimum of security control +Chapter 8. Stand-alone Servers

    Chapter 8. Stand-alone Servers

    John H. Terpstra

    Samba Team

    +Stand-alone Servers are independent of Domain Controllers on the network. +They are not Domain Members and function more like workgroup servers. In many +cases a Stand-alone Server is configured with a minimum of security control with the intent that all data served will be readily accessible to all users. -

    Features and Benefits

    -Stand-Alone servers can be as secure or as insecure as needs dictate. They can +

    Features and Benefits

    +Stand-alone Servers can be as secure or as insecure as needs dictate. They can have simple or complex configurations. Above all, despite the hoopla about -Domain security they remain a very common installation. +Domain Security they remain a common installation.

    If all that is needed is a server for read-only files, or for -printers alone, it may not make sense to affect a complex installation. +printers alone, it may not make sense to effect a complex installation. For example: A drafting office needs to store old drawings and reference -standards. No-one can write files to the server as it is legislatively -important that all documents remain unaltered. A share mode read-only stand-alone -server is an ideal solution. +standards. Noone can write files to the server as it is legislatively +important that all documents remain unaltered. A share mode read-only Stand-alone +Server is an ideal solution.

    Another situation that warrants simplicity is an office that has many printers that are queued off a single central server. Everyone needs to be able to print -to the printers, there is no need to affect any access controls and no files will -be served from the print server. Again a share mode stand-alone server makes +to the printers, there is no need to effect any access controls and no files will +be served from the print server. Again, a share mode Stand-alone Server makes a great solution. -

    Background

    -The term stand-alone server means that the server +

    Background

    +The term Stand-alone Server means that it will provide local authentication and access control for all resources that are available from it. In general this means that there will be a -local user database. In more technical terms, it means that resources +local user database. In more technical terms, it means resources on the machine will be made available in either SHARE mode or in USER mode.

    No special action is needed other than to create user accounts. Stand-alone -servers do NOT provide network logon services. This means that machines that -use this server do NOT perform a domain logon to it. Whatever logon facility -the workstations are subject to is independent of this machine. It is however -necessary to accommodate any network user so that the logon name they use will -be translated (mapped) locally on the stand-alone server to a locally known +servers do not provide network logon services. This means that machines that +use this server do not perform a domain logon to it. Whatever logon facility +the workstations are subject to is independent of this machine. It is, however, +necessary to accommodate any network user so the logon name they use will +be translated (mapped) locally on the Stand-alone Server to a locally known user name. There are several ways this can be done.

    Samba tends to blur the distinction a little in respect of what is -a stand-alone server. This is because the authentication database may be -local or on a remote server, even if from the Samba protocol perspective -the Samba server is NOT a member of a domain security context. +a Stand-alone Server. This is because the authentication database may be +local or on a remote server, even if from the SMB protocol perspective +the Samba server is not a member of a domain security context.

    -Through the use of PAM (Pluggable Authentication Modules) and nsswitch -(the name service switcher, which maintains the unix user database) the source of authentication may reside on +Through the use of Pluggable Authentication Modules (PAM) and the name service switcher (NSSWITCH), +which maintains the UNIX-user database) the source of authentication may reside on another server. We would be inclined to call this the authentication server. This means that the Samba server may use the local UNIX/Linux system password database (/etc/passwd or /etc/shadow), may use a -local smbpasswd file, or may use -an LDAP back end, or even via PAM and Winbind another CIFS/SMB server +local smbpasswd file, or may use an LDAP backend, or even via PAM and Winbind another CIFS/SMB server for authentication. -

    Example Configuration

    -The following examples are designed to inspire simplicity. It is too easy to -attempt a high level of creativity and to introduce too much complexity in -server and network design. +

    Example Configuration

    +The examples, , and link linkend="SimplePrintServer"/>, +are designed to inspire simplicity. It is too easy to attempt a high level of creativity +and to introduce too much complexity in server and network design.

    Reference Documentation Server

    -Configuration of a read-only data server that EVERYONE can access is very simple. -Here is the smb.conf file that will do this. Assume that all the reference documents -are stored in the directory /export, that the documents are owned by a user other than -nobody. No home directories are shared, that are no users in the /etc/passwd -UNIX system database. This is a very simple system to administer. -

    Example 8.1. smb.conf for Reference Documentation Server

    # Global parameters
    [global]
    workgroup = MIDEARTH
    netbios name = GANDALF
    security = SHARE
    passdb backend = guest
    wins server = 192.168.1.1
    [data]
    comment = Data
    path = /export
    guest only = Yes

    -In the above example the machine name is set to REFDOCS, the workgroup is set to the name -of the local workgroup so that the machine will appear in with systems users are familiar -with. The only password backend required is the "guest" backend so as to allow default -unprivileged account names to be used. Given that there is a WINS server on this network -we do use it. +Configuration of a read-only data server that everyone can access is very simple. + is the smb.conf file that will do this. Assume that all the reference documents +are stored in the directory /export, and the documents are owned by a user other than +nobody. No home directories are shared, and there are no users in the /etc/passwd +UNIX system database. This is a simple system to administer. +

    Example 8.1. smb.conf for Reference Documentation Server

    # Global parameters
    [global]
    workgroup = MIDEARTH
    netbios name = GANDALF
    security = SHARE
    passdb backend = guest
    wins server = 192.168.1.1
    [data]
    comment = Data
    path = /export
    guest only = Yes

    +In above, the machine name is set to GANDALF, the workgroup is set to the name +of the local workgroup (MIDEARTH) so the machine will appear together with systems with +which users are familiar. The only password backend required is the “guest” backend to allow default +unprivileged account names to be used. As there is a WINS server on this networki, we of obviously make use of it.

    Central Print Serving

    -Configuration of a simple print server is very simple if you have all the right tools +Configuration of a simple print server is easy if you have all the right tools on your system.

    Assumptions:

    1. - The print server must require no administration + The print server must require no administration.

    2. The print spooling and processing system on our print server will be CUPS. - (Please refer to the chapter about CUPS for more information). + (Please refer to for more information).

    3. - All printers that the print server will service will be network - printers. They will be correctly configured, by the administrator, - in the CUPS environment. + The print server will service only network printers. The network administrator + will correctly configure the CUPS environment to support the printers.

    4. - All workstations will be installed using postscript drivers. The printer - of choice is the Apple Color LaserWriter. + All workstations will use only postscript drivers. The printer driver + of choice is the one shipped with the Windows OS for the Apple Color LaserWriter.

    In this example our print server will spool all incoming print jobs to /var/spool/samba until the job is ready to be submitted by @@ -88,12 +85,12 @@ the anonymous (guest) user, two things will be required:

    Enabling Anonymous Printing

    • The UNIX/Linux system must have a guest account. The default for this is usually the account nobody. - To find the correct name to use for your version of Samba do the + To find the correct name to use for your version of Samba, do the following:

      -$ testparm -s -v | grep "guest account"
      +$ testparm -s -v | grep "guest account"
       

      - Then make sure that this account exists in your system password + Make sure that this account exists in your system password database (/etc/passwd).

    • The directory into which Samba will spool the file must have write @@ -105,8 +102,18 @@ the anonymous (guest) user, two things will be required: root# chmod a+rwt /var/spool/samba

    -

    Example 8.2. smb.conf for anonymous printing

    # Global parameters
    [global]
    workgroup = MIDEARTH
    netbios name = GANDALF
    security = SHARE
    passdb backend = guest
    wins server = noldor
    printing = cups
    printcap name = cups
    [printers]
    comment = All Printers
    path = /var/spool/samba
    printer admin = root
    guest ok = Yes
    printable = Yes
    use client driver = Yes
    browseable = No

    -

    Common Errors

    +The contents of the smb.conf file is shown in . +

    +

    Example 8.2. smb.conf for Anonymous Printing

    # Global parameters
    [global]
    workgroup = MIDEARTH
    netbios name = GANDALF
    security = SHARE
    passdb backend = guest
    printing = cups
    printcap name = cups
    [printers]
    comment = All Printers
    path = /var/spool/samba
    printer admin = root
    guest ok = Yes
    printable = Yes
    use client driver = Yes
    browseable = No

    +

    Note

    + + +On CUPS-enabled systems there is a facility to pass raw data directly to the printer without +intermediate processing via CUPS print filters. Where use of this mode of operation is desired, +it is necessary to configure a raw printing device. It is also necessary to enable the raw mime +handler in the /etc/mime.conv and /etc/mime.types +files. Refer to . +

    Common Errors

    The greatest mistake so often made is to make a network configuration too complex. It pays to use the simplest solution that will meet the needs of the moment. -

    +

    diff --git a/docs/htmldocs/VFS.html b/docs/htmldocs/VFS.html index ffa767e6c9..cedacd4e07 100644 --- a/docs/htmldocs/VFS.html +++ b/docs/htmldocs/VFS.html @@ -1,102 +1,112 @@ -Chapter 20. Stackable VFS modules

    Chapter 20. Stackable VFS modules

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Tim Potter

    Simo Sorce

    original vfs_skel README

    Alexander Bokovoy

    original vfs_netatalk docs

    Stefan Metzmacher

    Update for multiple modules

    Features and Benefits

    -Since Samba-3, there is support for stackable VFS(Virtual File System) modules. -Samba passes each request to access the unix file system thru the loaded VFS modules. -This chapter covers all the modules that come with the samba source and references to +Chapter 20. Stackable VFS modules

    Chapter 20. Stackable VFS modules

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Tim Potter

    Samba Team

    Simo Sorce

    original vfs_skel README

    Alexander Bokovoy

    original vfs_netatalk docs

    Stefan Metzmacher

    Update for multiple modules

    Features and Benefits

    +Since Samba-3, there is support for stackable VFS (Virtual File System) modules. +Samba passes each request to access the UNIX file system through the loaded VFS modules. +This chapter covers all the modules that come with the Samba source and references to some external modules. -

    Discussion

    +

    Discussion

    If not supplied with your platform distribution binary Samba package you may have problems -to compile these modules, as shared libraries are compiled and linked in different ways -on different systems. They currently have been tested against GNU/Linux and IRIX. +compiling these modules, as shared libraries are compiled and linked in different ways +on different systems. They currently have been tested against GNU/Linux and IRIX.

    -To use the VFS modules, create a share similar to the one below. The -important parameter is the vfs objects parameter where +To use the VFS modules, create a share similar to the one below. The +important parameter is the vfs objects parameter where you can list one or more VFS modules by name. For example, to log all access -to files and put deleted files in a recycle bin: +to files and put deleted files in a recycle bin, see . -

    Example 20.1. smb.conf with VFS modules

    [audit]
    comment = Audited /data directory
    path = /data
    vfs objects = audit recycle
    writeable = yes
    browseable = yes

    +

    Example 20.1. smb.conf with VFS modules

    [audit]
    comment = Audited /data directory
    path = /data
    vfs objects = audit recycle
    writeable = yes
    browseable = yes

    The modules are used in the order in which they are specified.

    -Samba will attempt to load modules from the lib -directory in the root directory of the samba installation (usually -/usr/lib/samba/vfs or /usr/local/samba/lib/vfs +Samba will attempt to load modules from the /lib directory in the root directory of the +Samba installation (usually /usr/lib/samba/vfs or /usr/local/samba/lib/vfs ).

    Some modules can be used twice for the same share. -This can be done using a configuration similar to the one below. +This can be done using a configuration similar to the one shown in . -

    Example 20.2. smb.conf with multiple VFS modules

    [test]
    comment = VFS TEST
    path = /data
    writeable = yes
    browseable = yes
    vfs objects = example:example1 example example:test
    example1: parameter = 1
    example: parameter = 5
    test: parameter = 7

    -

    Included modules

    audit

    +

    Example 20.2. smb.conf with multiple VFS modules

    [test]
    comment = VFS TEST
    path = /data
    writeable = yes
    browseable = yes
    vfs objects = example:example1 example example:test
    example1: parameter = 1
    example: parameter = 5
    test: parameter = 7

    +

    Included Modules

    audit

    A simple module to audit file access to the syslog - facility. The following operations are logged: -

    • share

    • connect/disconnect

    • directory opens/create/remove

    • file open/close/rename/unlink/chmod

    -

    extd_audit

    - This module is identical with the audit module above except - that it sends audit logs to both syslog as well as the smbd log file/s. The - loglevel for this module is set in the smb.conf file. + facility. The following operations are logged: +

    • share
    • connect/disconnect
    • directory opens/create/remove
    • file open/close/rename/unlink/chmod

    +

    extd_audit

    + This module is identical with the audit module above except + that it sends audit logs to both syslog as well as the smbd log files. The + log level for this module is set in the smb.conf file.

    - The logging information that will be written to the smbd log file is controlled by - the log level parameter in smb.conf. The - following information will be recorded: -

    Table 20.1. Extended Auditing Log Information

    Log LevelLog Details - File and Directory Operations
    0Creation / Deletion
    1Create / Delete / Rename / Permission Changes
    2Create / Delete / Rename / Perm Change / Open / Close

    fake_perms

    + Valid settings and the information that will be recorded are shown in . +

    Table 20.1. Extended Auditing Log Information

    Log LevelLog Details - File and Directory Operations
    0Creation / Deletion
    1Create / Delete / Rename / Permission Changes
    2Create / Delete / Rename / Perm Change / Open / Close

    fake_perms

    This module was created to allow Roaming Profile files and directories to be set (on the Samba server - under Unix) as read only. This module will if installed on the Profiles share will report to the client + under UNIX) as read only. This module will, if installed on the Profiles share, report to the client that the Profile files and directories are writable. This satisfies the client even though the files will never be overwritten as the client logs out or shuts down. -

    recycle

    - A recycle-bin like module. When used any unlink call - will be intercepted and files moved to the recycle - directory instead of being deleted. This gives the same - effect as the "Recycle Bin" on Windows computers. -

    Supported options: -

    recycle:repository

    Relative path of the directory where deleted files should be moved to

    recycle:keeptree

    Specifies whether the directory structure should - be kept or if the files in the directory that is being - deleted should be kept seperately in the recycle bin. -

    recycle:versions

    If this option is set, two files - with the same name that are deleted will both - be kept in the recycle bin. Newer deleted versions - of a file will be called "Copy #x of filename".

    recycle:touch

    Specifies whether a file's access - date should be touched when the file is moved to - the recycle bin.

    recycle:maxsize

    Files that are larger than the number - of bytes specified by this parameter will - not be put into the recycle bin.

    recycle:exclude

    List of files that should not - be put into the recycle bin when deleted, but deleted - in the regular way.

    recycle:exclude_dir

    Contains a list of directories. When files from - these directories are deleted, they are not put into the - recycle bin, but deleted in the regular way. -

    recycle:noversions

    Opposite of recycle:versions. If both options are specified, this one takes precedence.

    -

    netatalk

    - A netatalk module, that will ease co-existence of samba and - netatalk file sharing services. +

    recycle

    + A Recycle Bin-like module. Where used, unlink calls will be intercepted and files moved + to the recycle directory instead of being deleted. This gives the same effect as the + Recycle Bin on Windows computers. +

    + The Recycle Bin will not appear in Windows Explorer views of the network file system + (share) nor on any mapped drive. Instead, a directory called .recycle will be + automatically created when the first file is deleted. Users can recover files from the + .recycle directory. If the recycle:keeptree has been + specified, deleted files will be found in a path identical with that from which the file was deleted. +

    Supported options for the recycle module are as follow: +

    recycle:repository

    + Relative path of the directory where deleted files should be moved. +

    recycle:keeptree

    + Specifies whether the directory structure should be kept or if the files in the directory that is being + deleted should be kept seperately in the recycle bin. +

    recycle:versions

    + If this option is set, two files + with the same name that are deleted will both + be kept in the recycle bin. Newer deleted versions + of a file will be called “Copy #x of filename”. +

    recycle:touch

    + Specifies whether a file's access date should be touched when the file is moved to the recycle bin. +

    recycle:maxsize

    + Files that are larger than the number of bytes specified by this parameter will not be put into the recycle bin. +

    recycle:exclude

    + List of files that should not be put into the recycle bin when deleted, but deleted in the regular way. +

    recycle:exclude_dir

    + Contains a list of directories. When files from these directories are + deleted, they are not put into the + recycle bin but are deleted in the + regular way. +

    recycle:noversions

    + Opposite of recycle:versions. If both options are specified, this one takes precedence. +

    +

    netatalk

    + A netatalk module will ease co-existence of Samba and netatalk file sharing services.

    Advantages compared to the old netatalk module: -

    • it doesn't care about creating of .AppleDouble forks, just keeps them in sync

    • if a share in smb.conf doesn't contain .AppleDouble item in hide or veto list, it will be added automatically

    -

    VFS modules available elsewhere

    +

    • Does not care about creating .AppleDouble forks, just keeps them in sync.

    • If a share in smb.conf does not contain .AppleDouble item in hide or veto list, it will be added automatically.

    +

    VFS Modules Available Elsewhere

    This section contains a listing of various other VFS modules that -have been posted but don't currently reside in the Samba CVS -tree for one reason or another (e.g. it is easy for the maintainer +have been posted but do not currently reside in the Samba CVS +tree for one reason or another (e.g., it is easy for the maintainer to have his or her own CVS tree).

    No statements about the stability or functionality of any module should be implied due to its presence here. -

    DatabaseFS

    - URL: http://www.css.tayloru.edu/~elorimer/databasefs/index.php -

    By Eric Lorimer.

    - I have created a VFS module which implements a fairly complete read-only - filesystem. It presents information from a database as a filesystem in +

    DatabaseFS

    + URL: http://www.css.tayloru.edu/~elorimer/databasefs/index.php +

    By Eric Lorimer.

    + I have created a VFS module that implements a fairly complete read-only + filesystem. It presents information from a database as a filesystem in a modular and generic way to allow different databases to be used (originally designed for organizing MP3s under directories such as - "Artists," "Song Keywords," etc... I have since applied it to a student - roster database very easily). The directory structure is stored in the + “Artists,” “Song Keywords,” and so on. I have since easily + applied it to a student + roster database.) The directory structure is stored in the database itself and the module makes no assumptions about the database structure beyond the table it requires to run.

    Any feedback would be appreciated: comments, suggestions, patches, - etc... If nothing else, hopefully it might prove useful for someone + and so on. If nothing else, hopefully it might prove useful for someone else who wishes to create a virtual filesystem. -

    vscan

    URL: http://www.openantivirus.org/

    - samba-vscan is a proof-of-concept module for Samba, which +

    vscan

    URL: http://www.openantivirus.org/

    + samba-vscan is a proof-of-concept module for Samba, which uses the VFS (virtual file system) features of Samba 2.2.x/3.0 alphaX. Of course, Samba has to be compiled with VFS support. - samba-vscan supports various virus scanners and is maintained + samba-vscan supports various virus scanners and is maintained by Rainer Link. -

    +

    diff --git a/docs/htmldocs/bugreport.html b/docs/htmldocs/bugreport.html index 49eb2117ca..0e963269d5 100644 --- a/docs/htmldocs/bugreport.html +++ b/docs/htmldocs/bugreport.html @@ -1,115 +1,117 @@ -Chapter 35. Reporting Bugs

    Chapter 35. Reporting Bugs

    Jelmer R. Vernooij

    The Samba Team

    Andrew Tridgell

    Samba Team

    27 June 1997

    Introduction

    Please report bugs using - bugzilla.

    -Please take the time to read this file before you submit a bug -report. Also, please see if it has changed between releases, as we -may be changing the bug reporting mechanism at some time. +Chapter 35. Reporting Bugs

    Chapter 35. Reporting Bugs

    John H. Terpstra

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    Andrew Tridgell

    Samba Team

    27 June 1997

    Introduction

    Please report bugs using Samba's +Bugzilla facilities and +take the time to read this file before you submit a bug +report. Also, check to see if it has changed between releases, as we +may be changing the bug reporting mechanism at some point.

    -Please also do as much as you can yourself to help track down the +Please do as much as you can yourself to help track down the bug. Samba is maintained by a dedicated group of people who volunteer -their time, skills and efforts. We receive far more mail about it than -we can possibly answer, so you have a much higher chance of an answer -and a fix if you send us a "developer friendly" bug report that lets +their time, skills and efforts. We receive far more mail than +we can possibly answer, so you have a much higher chance of a response +and a fix if you send us a “developer friendly” bug report that lets us fix it fast.

    Do not assume that if you post the bug to the comp.protocols.smb newsgroup or the mailing list that we will read it. If you suspect that your -problem is not a bug but a configuration problem then it is better to send -it to the Samba mailing list, as there are (at last count) 5000 other users on -that list that may be able to help you. +problem is not a bug but a configuration problem, it is better to send +it to the Samba mailing list, as there are thousands of other users on +that list who may be able to help you.

    You may also like to look though the recent mailing list archives, -which are conveniently accessible on the Samba web pages -at http://samba.org/samba/. -

    General info

    -Before submitting a bug report check your config for silly -errors. Look in your log files for obvious messages that tell you that -you've misconfigured something and run testparm to test your config +which are conveniently accessible on the Samba Web pages +at http://samba.org/samba/. +

    General Information

    +Before submitting a bug report, check your config for silly +errors. Look in your log files for obvious messages that tell +you've misconfigured something. Run testparm to check your config file for correct syntax.

    -Have you run through the diagnosis? -This is very important. + Have you looked through ? This is extremely important.

    -If you include part of a log file with your bug report then be sure to +If you include part of a log file with your bug report, then be sure to annotate it with exactly what you were doing on the client at the -time, and exactly what the results were. -

    Debug levels

    +time and exactly what the results were. +

    Debug Levels

    If the bug has anything to do with Samba behaving incorrectly as a -server (like refusing to open a file) then the log files will probably -be very useful. Depending on the problem a log level of between 3 and +server (like refusing to open a file), then the log files will probably +be quite useful. Depending on the problem, a log level of between 3 and 10 showing the problem may be appropriate. A higher level gives more detail, but may use too much disk space.

    -To set the debug level use the log level in your +To set the debug level, use the log level in your smb.conf. You may also find it useful to set the log level higher for just one machine and keep separate logs for each machine. -To do this add the following lines to your main smb.conf file: +To do this, add the following lines to your main smb.conf file:

    log level = 10
    log file = /usr/local/samba/lib/log.%m
    include = /usr/local/samba/lib/smb.conf.%m

    -then create a file -/usr/local/samba/lib/smb.conf.machine where +and create a file /usr/local/samba/lib/smb.conf.machine where machine is the name of the client you wish to debug. In that file put any smb.conf commands you want, for example -log level may be useful. This also allows you to -experiment with different security systems, protocol levels etc on just +log level may be useful. This also allows you to +experiment with different security systems, protocol levels and so on, on just one machine.

    -The smb.conf entry log level -is synonymous with the parameter debuglevel that has -been used in older versions of Samba and is being retained for backwards +The smb.conf entry log level +is synonymous with the parameter debuglevel that has +been used in older versions of Samba and is being retained for backward compatibility of smb.conf files.

    -As the log level value is increased you will record -a significantly increasing level of debugging information. For most -debugging operations you may not need a setting higher than +As the log level value is increased, you will record +a significantly greater level of debugging information. For most +debugging operations, you may not need a setting higher than 3. Nearly all bugs can be tracked at a setting of 10, but be -prepared for a VERY large volume of log data. -

    Internal errors

    -If you get a INTERNAL ERROR message in your log files +prepared for a large volume of log data. +

    Internal Errors

    +If you get the message “INTERNAL ERROR” in your log files, it means that Samba got an unexpected signal while running. It is probably a segmentation fault and almost certainly means a bug in Samba (unless you have faulty hardware or system software).

    -If the message came from smbd then it will probably be accompanied by -a message which details the last SMB message received by smbd. This -info is often very useful in tracking down the problem so please +If the message came from smbd, it will probably be accompanied by +a message that details the last SMB message received by smbd. This +information is often useful in tracking down the problem so please include it in your bug report.

    You should also detail how to reproduce the problem, if possible. Please make this reasonably detailed. -

    +

    + You may also find that a core file appeared in a corefiles -subdirectory of the directory where you keep your samba log +subdirectory of the directory where you keep your Samba log files. This file is the most useful tool for tracking down the bug. To -use it you do this: -

    +use it, you do this:
    +
    +
    +

     $ gdb smbd core
     

    adding appropriate paths to smbd and core so gdb can find them. If you -don't have gdb then try dbx. Then within the debugger +do not have gdb, try dbx. Then within the debugger, use the command where to give a stack trace of where the problem occurred. Include this in your report.

    -If you know any assembly language then do a -disass of the routine -where the problem occurred (if its in a library routine then +If you know any assembly language, do a disass of the routine +where the problem occurred (if its in a library routine, then disassemble the routine that called it) and try to work out exactly where the problem is by looking at the surrounding code. Even if you -don't know assembly, including this info in the bug report can be +do not know assembly, including this information in the bug report can be useful. -

    Attaching to a running process

    -Unfortunately some unixes (in particular some recent linux kernels) +

    Attaching to a Running Process

    +Unfortunately, some UNIXes (in particular some recent Linux kernels) refuse to dump a core file if the task has changed uid (which smbd -does often). To debug with this sort of system you could try to attach +does often). To debug with this sort of system, you could try to attach to the running process using gdb smbd PID where you get PID from smbstatus. Then use c to continue and try to cause the core dump using the client. The debugger should catch the fault and tell you where it occurred. -

    Patches

    +

    Patches

    + + The best sort of bug report is one that includes a fix! If you send us -patches please use diff -u format if your version of +patches, please use diff -u format if your version of diff supports it, otherwise use diff -c4. Make sure you do the diff against a clean version of the source and let me know exactly what version you used. -

    +

    diff --git a/docs/htmldocs/compiling.html b/docs/htmldocs/compiling.html index 95cdb0f581..17aed45b4c 100644 --- a/docs/htmldocs/compiling.html +++ b/docs/htmldocs/compiling.html @@ -1,150 +1,164 @@ -Chapter 36. How to compile Samba

    Name

    smbcacls — Set or get ACLs on an NT file or directory names

    Synopsis

    smbcacls {//server/share} {filename} [-D acls] [-M acls] [-A acls] [-S acls] [-C name] [-G name] [-n] [-t] [-U username] [-h] [-d]

    DESCRIPTION

    This tool is part of the Samba(7) suite.

    The smbcacls program manipulates NT Access Control +smbcacls

    Name

    smbcacls — Set or get ACLs on an NT file or directory names

    Synopsis

    smbcacls {//server/share} {filename} [-D acls] [-M acls] [-a acls] [-S acls] [-C name] [-G name] [-n] [-t] [-U username] [-h] [-d]

    DESCRIPTION

    This tool is part of the Samba(7) suite.

    The smbcacls program manipulates NT Access Control Lists (ACLs) on SMB file shares.

    OPTIONS

    The following options are available to the smbcacls program. - The format of ACLs is described in the section ACL FORMAT

    -A acls

    Add the ACLs specified to the ACL list. Existing + The format of ACLs is described in the section ACL FORMAT

    -a acls

    Add the ACLs specified to the ACL list. Existing access control entries are unchanged.

    -M acls

    Modify the mask value (permissions) for the ACLs specified on the command line. An error will be printed for each ACL specified that was not already present in the ACL list @@ -28,8 +28,8 @@ Don't actually do anything, only validate the correctness of the arguments.

    -h|--help

    Print a summary of command line options. -

    -V

    Prints the version number for -smbd.

    -s <configuration file>

    The file specified contains the +

    -V

    Prints the program version number. +

    -s <configuration file>

    The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well @@ -42,13 +42,13 @@ not specified is zero.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of +day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will -override the log level parameter +override the log level parameter in the smb.conf file.

    -l|--logfile=logbasename

    File name for log/debug files. The extension ".client" will be appended. The log file is never removed by the client. diff --git a/docs/htmldocs/smbclient.1.html b/docs/htmldocs/smbclient.1.html index 1ee5fd26da..1fc9f30a21 100644 --- a/docs/htmldocs/smbclient.1.html +++ b/docs/htmldocs/smbclient.1.html @@ -11,7 +11,7 @@ is the NetBIOS name of the SMB/CIFS server offering the desired service and service is the name of the service offered. Thus to connect to - the service "printer" on the SMB/CIFS server "smbserver", + the service "printer" on the SMB/CIFS server "smbserver", you would use the servicename //smbserver/printer

    Note that the server name required is NOT necessarily the IP (DNS) host name of the server ! The name required is @@ -39,7 +39,7 @@

    -R <name resolve order>

    This option is used by the programs in the Samba suite to determine what naming services and in what order to resolve host names to IP addresses. The option takes a space-separated - string of different name resolution options.

    The options are :"lmhosts", "host", "wins" and "bcast". They + string of different name resolution options.

    The options are :"lmhosts", "host", "wins" and "bcast". They cause names to be resolved as follows:

    • lmhosts: Lookup an IP address in the Samba lmhosts file. If the line in lmhosts has no name type attached to the NetBIOS name (see @@ -65,7 +65,7 @@ this parameter or any entry in the name resolve order parameter of the smb.conf(5) file the name resolution methods will be attempted in this order.

    -M NetBIOS name

    This options allows you to send messages, using - the "WinPopup" protocol, to another computer. Once a connection is + the "WinPopup" protocol, to another computer. Once a connection is established you then type your message, pressing ^D (control-D) to end.

    If the receiving computer is running WinPopup the user will receive the message and probably a beep. If they are not running @@ -86,7 +86,7 @@ TCP port number for an SMB/CIFS server is 139, which is the default.

    -h|--help

    Print a summary of command line options.

    -I IP-address

    IP address is the address of the server to connect to. - It should be specified in standard "a.b.c.d" notation.

    Normally the client would attempt to locate a named + It should be specified in standard "a.b.c.d" notation.

    Normally the client would attempt to locate a named SMB/CIFS server by looking it up via the NetBIOS name resolution mechanism described above in the name resolve order parameter above. Using this parameter will force the client @@ -115,8 +115,8 @@ size when getting or putting a file from/to the server. The default is 65520 bytes. Setting this value smaller (to 1200 bytes) has been observed to speed up file transfers to and from a Win9x server. -

    -V

    Prints the version number for -smbd.

    -s <configuration file>

    The file specified contains the +

    -V

    Prints the program version number. +

    -s <configuration file>

    The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well @@ -129,15 +129,15 @@ not specified is zero.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of +day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will -override the log level parameter +override the log level parameter in the smb.conf file.

    -l|--logfile=logbasename

    File name for log/debug files. The extension -".client" will be appended. The log file is +".client" will be appended. The log file is never removed by the client.

    -N

    If specified, this parameter suppresses the normal password prompt from the client to the user. This is useful when @@ -170,7 +170,7 @@ via the ps command. To be safe always allow rpcclient to prompt for a password and type it in directly.

    -n <primary NetBIOS name>

    This option allows you to override the NetBIOS name that Samba uses for itself. This is identical -to setting the netbios name parameter in the smb.conf file. +to setting the netbios name parameter in the smb.conf file. However, a command line setting will take precedence over settings in smb.conf.

    -i <scope>

    This specifies a NetBIOS scope that @@ -191,13 +191,13 @@ options.

    -T tar options

    smbcli share. The secondary tar flags that can be given to this option are :

    • c - Create a tar file on UNIX. Must be followed by the name of a tar file, tape device - or "-" for standard output. If using standard output you must + or "-" for standard output. If using standard output you must turn the log level to its lowest value -d0 to avoid corrupting your tar file. This flag is mutually exclusive with the x flag.

    • x - Extract (restore) a local tar file back to a share. Unless the -D option is given, the tar files will be restored from the top level of the share. Must be - followed by the name of the tar file, device or "-" for standard + followed by the name of the tar file, device or "-" for standard input. Mutually exclusive with the c flag. Restored files have their creation times (mtime) set to the date saved in the tar file. Directories currently do not get @@ -235,21 +235,21 @@ options.

    -T tar options

    smbcli

    Tar Filenames

    All file names can be given as DOS path names (with '\\' as the component separator) or as UNIX path names (with '/' as the component separator).

    Examples

    Restore from tar file backup.tar into myshare on mypc - (no password on share).

    smbclient //mypc/yshare "" -N -Tx backup.tar + (no password on share).

    smbclient //mypc/yshare "" -N -Tx backup.tar

    Restore everything except users/docs -

    smbclient //mypc/myshare "" -N -TXx backup.tar +

    smbclient //mypc/myshare "" -N -TXx backup.tar users/docs

    Create a tar file of the files beneath - users/docs.

    smbclient //mypc/myshare "" -N -Tc + users/docs.

    smbclient //mypc/myshare "" -N -Tc backup.tar users/docs

    Create the same tar file as above, but now use - a DOS path name.

    smbclient //mypc/myshare "" -N -tc backup.tar + a DOS path name.

    smbclient //mypc/myshare "" -N -tc backup.tar users\edocs

    Create a tar file of all the files and directories in - the share.

    smbclient //mypc/myshare "" -N -Tc backup.tar * + the share.

    smbclient //mypc/myshare "" -N -Tc backup.tar *

    -D initial directory

    Change to initial directory before starting. Probably only of any use with the tar -T option.

    -c command string

    command string is a semicolon-separated list of commands to be executed instead of prompting from stdin. -N is implied by -c.

    This is particularly useful in scripts and for printing stdin to the server, e.g. -c 'print -'.

    OPERATIONS

    Once the client is running, the user is presented with - a prompt :

    smb:\>

    The backslash ("\\") indicates the current working directory + a prompt :

    smb:\>

    The backslash ("\\") indicates the current working directory on the server, and will change if the current working directory is changed.

    The prompt indicates that the client is ready and waiting to carry out a user command. Each command is a single word, optionally @@ -258,9 +258,9 @@ options.

    -T tar options

    smbcli state otherwise. All commands are case-insensitive. Parameters to commands may or may not be case sensitive, depending on the command.

    You can specify file names which have spaces in them by quoting - the name with double quotes, for example "a long file name".

    Parameters shown in square brackets (e.g., "[parameter]") are + the name with double quotes, for example "a long file name".

    Parameters shown in square brackets (e.g., "[parameter]") are optional. If not given, the command will use suitable defaults. Parameters - shown in angle brackets (e.g., "<parameter>") are required. + shown in angle brackets (e.g., "<parameter>") are required.

    Note that all commands operating on the server are actually performed by issuing a request to the server. Thus the behavior may vary from server to server, depending on how the server was implemented. @@ -271,7 +271,7 @@ options.

    -T tar options

    smbcli command will execute a shell locally and run the specified shell command. If no command is specified, a local shell will be run.

    altname file

    The client will request that the server return - the "alternate" name (the 8.3 name) for a file or directory. + the "alternate" name (the 8.3 name) for a file or directory.

    cancel jobid0 [jobid1] ... [jobidN]

    The client will request that the server cancel the printjobs identified by the given numeric print job ids.

    chmod file mode in octal

    This command depends on the server supporting the CIFS @@ -282,7 +282,7 @@ options.

    -T tar options

    smbcli change the UNIX user and group ownership to the given decimal values. Note there is currently no way to remotely look up the UNIX uid and gid values for a given name. This may be addressed in future versions of the CIFS UNIX extensions. -

    cd [directory name]

    If "directory name" is specified, the current +

    cd [directory name]

    If "directory name" is specified, the current working directory on the server will be changed to the directory specified. This operation will fail if for any reason the specified directory is inaccessible.

    If no directory name is specified, the current working @@ -314,15 +314,15 @@ options.

    -T tar options

    smbcli filters for directories rather than files when recursion is toggled ON.

    The mask specified with the mask command is necessary to filter files within those directories. For example, if the - mask specified in an mget command is "source*" and the mask - specified with the mask command is "*.c" and recursion is + mask specified in an mget command is "source*" and the mask + specified with the mask command is "*.c" and recursion is toggled ON, the mget command will retrieve all files matching - "*.c" in all directories below and including all directories - matching "source*" in the current working directory.

    Note that the value for mask defaults to blank (equivalent - to "*") and remains so until the mask command is used to change it. + "*.c" in all directories below and including all directories + matching "source*" in the current working directory.

    Note that the value for mask defaults to blank (equivalent + to "*") and remains so until the mask command is used to change it. It retains the most recently specified value indefinitely. To avoid unexpected results it would be wise to change the value of - mask back to "*" after using the mget or mput commands.

    md <directory name>

    See the mkdir command.

    mget <mask>

    Copy all files matching mask from the server to + mask back to "*" after using the mget or mput commands.

    md <directory name>

    See the mkdir command.

    mget <mask>

    Copy all files matching mask from the server to the machine running the client.

    Note that mask is interpreted differently during recursive operation and non-recursive operation - refer to the recurse and mask commands for more information. Note that all transfers in @@ -364,7 +364,7 @@ options.

    -T tar options

    smbcli

    tar <c|x>[IXbgNa]

    Performs a tar operation - see the -T command line option above. Behavior may be affected by the tarmode command (see below). Using g (incremental) and N - (newer) will affect tarmode settings. Note that using the "-" option + (newer) will affect tarmode settings. Note that using the "-" option with tar x may not work - use the command line option instead.

    blocksize <blocksize>

    Blocksize. Must be followed by a valid (greater than zero) blocksize. Causes tar file to be written out in @@ -410,8 +410,8 @@ options.

    -T tar options

    smbcli by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

    The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another - excellent piece of Open Source software, available at - ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 + excellent piece of Open Source software, available at + ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.

    diff --git a/docs/htmldocs/smbcontrol.1.html b/docs/htmldocs/smbcontrol.1.html index e7ccd27f26..b12076e726 100644 --- a/docs/htmldocs/smbcontrol.1.html +++ b/docs/htmldocs/smbcontrol.1.html @@ -9,9 +9,9 @@ to provide. See smb.conf for more information. The default configuration file name is determined at compile time.

    -i

    Run interactively. Individual commands of the form destination message-type parameters can be entered - on STDIN. An empty command line or a "q" will quit the + on STDIN. An empty command line or a "q" will quit the program.

    destination

    One of nmbd, smbd or a process ID.

    The smbd destination causes the - message to "broadcast" to all smbd daemons.

    The nmbd destination causes the + message to "broadcast" to all smbd daemons.

    The nmbd destination causes the message to be sent to the nmbd daemon specified in the nmbd.pid file.

    If a single process ID is given, the message is sent to only that process.

    message-type

    Type of message to send. See @@ -20,18 +20,18 @@ compile time.

    -i

    Run interactiv connections to the named share. Note that this doesn't affect client connections to any other shares. This message-type takes an argument of the share name for which client connections will be closed, or the - "*" character which will close all currently open shares. + "*" character which will close all currently open shares. This may be useful if you made changes to the access controls on the share. This message can only be sent to smbd.

    debug

    Set debug level to the value specified by the parameter. This can be sent to any of the destinations.

    force-election

    This message causes the nmbd daemon to force a new browse master election.

    ping

    - Send specified number of "ping" messages and - wait for the same number of reply "pong" messages. This can be sent to + Send specified number of "ping" messages and + wait for the same number of reply "pong" messages. This can be sent to any of the destinations.

    profile

    Change profile settings of a daemon, based on the - parameter. The parameter can be "on" to turn on profile stats - collection, "off" to turn off profile stats collection, "count" + parameter. The parameter can be "on" to turn on profile stats + collection, "off" to turn off profile stats collection, "count" to enable only collection of count stats (time stats are - disabled), and "flush" to zero the current profile stats. This can + disabled), and "flush" to zero the current profile stats. This can be sent to any smbd or nmbd destinations.

    debuglevel

    Request debuglevel of a certain daemon and write it to stdout. This can be sent to any of the destinations.

    profilelevel

    @@ -65,8 +65,8 @@ compile time.

    -i

    Run interactiv by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

    The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another - excellent piece of Open Source software, available at - ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 + excellent piece of Open Source software, available at + ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.

    diff --git a/docs/htmldocs/smbcquotas.1.html b/docs/htmldocs/smbcquotas.1.html index 59dcd106ed..2a439b4032 100644 --- a/docs/htmldocs/smbcquotas.1.html +++ b/docs/htmldocs/smbcquotas.1.html @@ -8,8 +8,8 @@

    -v

    Be verbose.

    -h|--help

    Print a summary of command line options. -

    -V

    Prints the version number for -smbd.

    -s <configuration file>

    The file specified contains the +

    -V

    Prints the program version number. +

    -s <configuration file>

    The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well @@ -22,15 +22,15 @@ not specified is zero.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of +day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will -override the log level parameter +override the log level parameter in the smb.conf file.

    -l|--logfile=logbasename

    File name for log/debug files. The extension -".client" will be appended. The log file is +".client" will be appended. The log file is never removed by the client.

    -N

    If specified, this parameter suppresses the normal password prompt from the client to the user. This is useful when @@ -83,4 +83,4 @@ it in directly.

    QU arguments, an exit status of 2 is returned.

    VERSION

    This man page is correct for version 3.0 of the Samba suite.

    AUTHOR

    The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed by the Samba Team as an Open Source project similar - to the way the Linux kernel is developed.

    smbcacls was written by Stefan Metzmacher.

    + to the way the Linux kernel is developed.

    smbcquotas was written by Stefan Metzmacher.

    diff --git a/docs/htmldocs/smbd.8.html b/docs/htmldocs/smbd.8.html index 291ddbc0f6..fd337acf83 100644 --- a/docs/htmldocs/smbd.8.html +++ b/docs/htmldocs/smbd.8.html @@ -42,14 +42,14 @@

    -S

    If specified, this parameter causes smbd to log to standard output rather than a file.

    -i

    If this parameter is specified it causes the - server to run "interactively", not as a daemon, even if the + server to run "interactively", not as a daemon, even if the server is executed on the command line of a shell. Setting this parameter negates the implicit deamon mode when run from the command line. smbd also logs to standard output, as if the -S parameter had been given. -

    -V

    Prints the version number for -smbd.

    -s <configuration file>

    The file specified contains the +

    -V

    Prints the program version number. +

    -s <configuration file>

    The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well @@ -62,26 +62,26 @@ not specified is zero.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of +day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will -override the log level parameter +override the log level parameter in the smb.conf file.

    -l|--logfile=logbasename

    File name for log/debug files. The extension -".client" will be appended. The log file is +".client" will be appended. The log file is never removed by the client.

    -h|--help

    Print a summary of command line options.

    -b

    Prints information about how Samba was built.

    -l <log directory>

    If specified, log directory - specifies a log directory into which the "log.smbd" log + specifies a log directory into which the "log.smbd" log file will be created for informational and debug messages from the running server. The log file generated is never removed by the server although its size may be controlled by the - max log size + max log size option in the smb.conf(5) file. Beware: If the directory specified does not exist, smbd will log to the default debug log location defined at compile time. @@ -127,7 +127,7 @@ never removed by the client. is not specific to the server, however.

    PAM INTERACTION

    Samba uses PAM for authentication (when presented with a plaintext password), for account checking (is this account disabled?) and for session management. The degree too which samba supports PAM is restricted - by the limitations of the SMB protocol and the obey pam restrictions smb.conf(5) paramater. When this is set, the following restrictions apply: + by the limitations of the SMB protocol and the obey pam restrictions smb.conf(5) paramater. When this is set, the following restrictions apply:

    • Account Validation: All accesses to a samba server are checked against PAM to see if the account is vaild, not disabled and is permitted to @@ -165,14 +165,14 @@ never removed by the client. them after, however this would affect performance.

    SEE ALSO

    hosts_access(5), inetd(8), nmbd(8), smb.conf(5), smbclient(1), testparm(1), testprns(1), and the Internet RFC's rfc1001.txt, rfc1002.txt. In addition the CIFS (formerly SMB) specification is available - as a link from the Web page - http://samba.org/cifs/.

    AUTHOR

    The original Samba software and related utilities + as a link from the Web page + http://samba.org/cifs/.

    AUTHOR

    The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

    The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another - excellent piece of Open Source software, available at - ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 + excellent piece of Open Source software, available at + ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.

    diff --git a/docs/htmldocs/smbmnt.8.html b/docs/htmldocs/smbmnt.8.html index 8caedac3f5..6982fa191b 100644 --- a/docs/htmldocs/smbmnt.8.html +++ b/docs/htmldocs/smbmnt.8.html @@ -16,8 +16,8 @@

    AUTHOR

    Volker Lendecke, Andrew Tridgell, Michael H. Warfield and others.

    The current maintainer of smbfs and the userspace tools smbmount, smbumount, - and smbmnt is Urban Widmark. - The SAMBA Mailing list + and smbmnt is Urban Widmark. + The SAMBA Mailing list is the preferred place to ask questions regarding these programs.

    The conversion of this manpage for Samba 2.2 was performed by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 diff --git a/docs/htmldocs/smbmount.8.html b/docs/htmldocs/smbmount.8.html index 64968b5de7..ec0c69bde1 100644 --- a/docs/htmldocs/smbmount.8.html +++ b/docs/htmldocs/smbmount.8.html @@ -55,7 +55,7 @@ password = <value> tracking down SMB connection problems. A suggested value to start with is 4. If set too high there will be a lot of output, possibly hiding the useful output.

    ip=<arg>

    Sets the destination host or IP address. -

    workgroup=<arg>

    Sets the workgroup on the destination

    sockopt=<arg>

    Sets the TCP socket options. See the smb.conf(5) socket options option. +

    workgroup=<arg>

    Sets the workgroup on the destination

    sockopt=<arg>

    Sets the TCP socket options. See the smb.conf5 socket options option.

    scope=<arg>

    Sets the NetBIOS scope

    guest

    Don't prompt for a password

    ro

    mount read-only

    rw

    mount read-write

    iocharset=<arg>

    sets the charset used by the Linux side for codepage to charset translations (NLS). Argument should be the @@ -100,8 +100,8 @@ password = <value> Sharity or perhaps replacing the SMB server with a NFS server.

    AUTHOR

    Volker Lendecke, Andrew Tridgell, Michael H. Warfield and others.

    The current maintainer of smbfs and the userspace tools smbmount, smbumount, - and smbmnt is Urban Widmark. - The SAMBA Mailing list + and smbmnt is Urban Widmark. + The SAMBA Mailing list is the preferred place to ask questions regarding these programs.

    The conversion of this manpage for Samba 2.2 was performed by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 diff --git a/docs/htmldocs/smbpasswd.5.html b/docs/htmldocs/smbpasswd.5.html index feb899f946..b65ad2dadf 100644 --- a/docs/htmldocs/smbpasswd.5.html +++ b/docs/htmldocs/smbpasswd.5.html @@ -83,8 +83,8 @@ by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

    The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another - excellent piece of Open Source software, available at - ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 + excellent piece of Open Source software, available at + ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.

    diff --git a/docs/htmldocs/smbpasswd.8.html b/docs/htmldocs/smbpasswd.8.html index 7c98e4b080..d1fe572c35 100644 --- a/docs/htmldocs/smbpasswd.8.html +++ b/docs/htmldocs/smbpasswd.8.html @@ -127,7 +127,7 @@ has been configured to use the experimental --with-ldapsam option. The -w switch is used to specify the password to be used with the - ldap admin dn. Note that the password is stored in + ldap admin dn. Note that the password is stored in the secrets.tdb and is keyed off of the admin's DN. This means that if the value of ldap admin dn ever changes, the password will need to be @@ -153,8 +153,8 @@ by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

    The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another - excellent piece of Open Source software, available at - ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 + excellent piece of Open Source software, available at + ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.

    diff --git a/docs/htmldocs/smbsh.1.html b/docs/htmldocs/smbsh.1.html index d1360d849d..fb49f92aa9 100644 --- a/docs/htmldocs/smbsh.1.html +++ b/docs/htmldocs/smbsh.1.html @@ -27,13 +27,13 @@ not specified is zero.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of +day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will -override the log level parameter +override the log level parameter in the smb.conf file.

    -R <name resolve order>

    This option is used to determine what naming services and in what order to resolve host names to IP addresses. The option takes a space-separated @@ -66,9 +66,9 @@ resolution methods as it depends on the target host being on a locally connected subnet.

    If this parameter is not set then the name resolve order defined in the smb.conf file parameter -(name resolve order) will be used. +(name resolve order) will be used.

    The default order is lmhosts, host, wins, bcast. Without -this parameter or any entry in the name resolve order parameter of the smb.conf file, the name +this parameter or any entry in the name resolve order parameter of the smb.conf file, the name resolution methods will be attempted in this order.

    -L libdir

    This parameter specifies the location of the shared libraries used by smbsh. The default value is specified at compile time. @@ -101,8 +101,8 @@ resolution methods will be attempted in this order.

    - ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 + excellent piece of Open Source software, available at + ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.

    diff --git a/docs/htmldocs/smbspool.8.html b/docs/htmldocs/smbspool.8.html index 7366ab458f..d0365fa6df 100644 --- a/docs/htmldocs/smbspool.8.html +++ b/docs/htmldocs/smbspool.8.html @@ -28,8 +28,8 @@ by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

    The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another - excellent piece of Open Source software, available at - ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 + excellent piece of Open Source software, available at + ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.

    diff --git a/docs/htmldocs/smbstatus.1.html b/docs/htmldocs/smbstatus.1.html index 99b152e75c..ab268aec23 100644 --- a/docs/htmldocs/smbstatus.1.html +++ b/docs/htmldocs/smbstatus.1.html @@ -1,8 +1,8 @@ smbstatus

    Name

    smbstatus — report on current Samba connections

    Synopsis

    smbstatus [-P] [-b] [-d <debug level>] [-v] [-L] [-B] [-p] [-S] [-s <configuration file>] [-u <username>]

    DESCRIPTION

    This tool is part of the Samba(7) suite.

    smbstatus is a very simple program to list the current Samba connections.

    OPTIONS

    -P|--profile

    If samba has been compiled with the profiling option, print only the contents of the profiling - shared memory area.

    -b|--brief

    gives brief output.

    -V

    Prints the version number for -smbd.

    -s <configuration file>

    The file specified contains the + shared memory area.

    -b|--brief

    gives brief output.

    -V

    Prints the program version number. +

    -s <configuration file>

    The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well @@ -15,15 +15,15 @@ not specified is zero.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of +day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will -override the log level parameter +override the log level parameter in the smb.conf file.

    -l|--logfile=logbasename

    File name for log/debug files. The extension -".client" will be appended. The log file is +".client" will be appended. The log file is never removed by the client.

    -v|--verbose

    gives verbose output.

    -L|--locks

    causes smbstatus to only list locks.

    -B|--byterange

    causes smbstatus to include byte range locks.

    -p|--processes

    print a list of smbd(8) processes and exit. @@ -35,8 +35,8 @@ never removed by the client. by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

    The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another - excellent piece of Open Source software, available at - ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 + excellent piece of Open Source software, available at + ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.

    diff --git a/docs/htmldocs/smbtar.1.html b/docs/htmldocs/smbtar.1.html index 95aabf1bc3..aa084944c2 100644 --- a/docs/htmldocs/smbtar.1.html +++ b/docs/htmldocs/smbtar.1.html @@ -27,13 +27,13 @@ the Samba suite.

    AUTHOR

    The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed by the Samba Team as an Open Source project similar - to the way the Linux kernel is developed.

    Ricky Poulten + to the way the Linux kernel is developed.

    Ricky Poulten wrote the tar extension and this man page. The smbtar - script was heavily rewritten and improved by Martin Kraemer. Many + script was heavily rewritten and improved by Martin Kraemer. Many thanks to everyone who suggested extensions, improvements, bug fixes, etc. The man page sources were converted to YODL format (another - excellent piece of Open Source software, available at - ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 + excellent piece of Open Source software, available at + ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.

    diff --git a/docs/htmldocs/smbtree.1.html b/docs/htmldocs/smbtree.1.html index cc683838dd..4d18bba56c 100644 --- a/docs/htmldocs/smbtree.1.html +++ b/docs/htmldocs/smbtree.1.html @@ -11,8 +11,8 @@ master browser

    -S

    Only print a list of all the domains and servers responding on broadcast or known by the master browser. -

    -V

    Prints the version number for -smbd.

    -s <configuration file>

    The file specified contains the +

    -V

    Prints the program version number. +

    -s <configuration file>

    The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well @@ -25,13 +25,13 @@ not specified is zero.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of +day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will -override the log level parameter +override the log level parameter in the smb.conf file.

    -l|--logfile=logbasename

    File name for log/debug files. The extension ".client" will be appended. The log file is never removed by the client. diff --git a/docs/htmldocs/smbumount.8.html b/docs/htmldocs/smbumount.8.html index f0aa0f974d..73a6e45cac 100644 --- a/docs/htmldocs/smbumount.8.html +++ b/docs/htmldocs/smbumount.8.html @@ -8,8 +8,8 @@ to make umount setuid root.

    OPTIONS

    mount-point

    The directory to unmount.

    SEE ALSO

    smbmount(8)

    AUTHOR

    Volker Lendecke, Andrew Tridgell, Michael H. Warfield and others.

    The current maintainer of smbfs and the userspace tools smbmount, smbumount, - and smbmnt is Urban Widmark. - The SAMBA Mailing list + and smbmnt is Urban Widmark. + The SAMBA Mailing list is the preferred place to ask questions regarding these programs.

    The conversion of this manpage for Samba 2.2 was performed by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 diff --git a/docs/htmldocs/speed.html b/docs/htmldocs/speed.html index 47f19abb70..b55989d053 100644 --- a/docs/htmldocs/speed.html +++ b/docs/htmldocs/speed.html @@ -1,140 +1,141 @@ -Chapter 39. Samba Performance Tuning

    Chapter 39. Samba Performance Tuning

    Paul Cochrane

    Dundee Limb Fitting Centre

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Comparisons

    +Chapter 39. Samba Performance Tuning

    Chapter 39. Samba Performance Tuning

    Paul Cochrane

    Dundee Limb Fitting Centre

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Comparisons

    The Samba server uses TCP to talk to the client. Thus if you are -trying to see if it performs well you should really compare it to +trying to see if it performs well, you should really compare it to programs that use the same protocol. The most readily available -programs for file transfer that use TCP are ftp or another TCP based +programs for file transfer that use TCP are ftp or another TCP-based SMB server.

    -If you want to test against something like a NT or WfWg server then +If you want to test against something like an NT or Windows for Workgroups server, then you will have to disable all but TCP on either the client or -server. Otherwise you may well be using a totally different protocol +server. Otherwise, you may well be using a totally different protocol (such as NetBEUI) and comparisons may not be valid.

    -Generally you should find that Samba performs similarly to ftp at raw +Generally, you should find that Samba performs similarly to ftp at raw transfer speed. It should perform quite a bit faster than NFS, -although this very much depends on your system. +although this depends on your system.

    Several people have done comparisons between Samba and Novell, NFS or -WinNT. In some cases Samba performed the best, in others the worst. I -suspect the biggest factor is not Samba vs some other system but the +Windows NT. In some cases Samba performed the best, in others the worst. I +suspect the biggest factor is not Samba versus some other system, but the hardware and drivers used on the various systems. Given similar -hardware Samba should certainly be competitive in speed with other +hardware, Samba should certainly be competitive in speed with other systems. -

    Socket options

    +

    Socket Options

    There are a number of socket options that can greatly affect the -performance of a TCP based server like Samba. +performance of a TCP-based server like Samba.

    The socket options that Samba uses are settable both on the command line with the -O option, or in the smb.conf file.

    -The socket options section of the smb.conf manual page describes how +The socket options section of the smb.conf manual page describes how to set these and gives recommendations.

    -Getting the socket options right can make a big difference to your +Getting the socket options correct can make a big difference to your performance, but getting them wrong can degrade it by just as much. The correct settings are very dependent on your local network.

    -The socket option TCP_NODELAY is the one that seems to make the -biggest single difference for most networks. Many people report that -adding socket options = TCP_NODELAY doubles the read -performance of a Samba drive. The best explanation I have seen for this is -that the Microsoft TCP/IP stack is slow in sending tcp ACKs. -

    Read size

    -The option read size affects the overlap of disk +The socket option TCP_NODELAY is the one that seems to make the biggest single difference +for most networks. Many people report that adding +socket options = TCP_NODELAY +doubles the read performance of a Samba drive. The best explanation I have seen for +this is that the Microsoft TCP/IP stack is slow in sending TCP ACKs. +

    Read Size

    +The option read size affects the overlap of disk reads/writes with network reads/writes. If the amount of data being transferred in several of the SMB commands (currently SMBwrite, SMBwriteX and -SMBreadbraw) is larger than this value then the server begins writing +SMBreadbraw) is larger than this value, then the server begins writing the data before it has received the whole packet from the network, or in the case of SMBreadbraw, it begins writing to the network before all the data has been read from disk.

    This overlapping works best when the speeds of disk and network access -are similar, having very little effect when the speed of one is much +are similar, having little effect when the speed of one is much greater than the other.

    -The default value is 16384, but very little experimentation has been -done yet to determine the optimal value, and it is likely that the best +The default value is 16384, but little experimentation has been +done as yet to determine the optimal value, and it is likely that the best value will vary greatly between systems anyway. A value over 65536 is pointless and will cause you to allocate memory unnecessarily. -

    Max xmit

    +

    Max Xmit

    At startup the client and server negotiate a maximum transmit size, which limits the size of nearly all SMB commands. You can set the -maximum size that Samba will negotiate using the max xmit option +maximum size that Samba will negotiate using the max xmit option in smb.conf. Note that this is the maximum size of SMB requests that -Samba will accept, but not the maximum size that the *client* will accept. +Samba will accept, but not the maximum size that the client will accept. The client maximum receive size is sent to Samba by the client and Samba -honours this limit. +honors this limit.

    It defaults to 65536 bytes (the maximum), but it is possible that some clients may perform better with a smaller transmit unit. Trying values of less than 2048 is likely to cause severe problems. -

    In most cases the default is the best option. -

    Log level

    -If you set the log level (also known as debug level) higher than 2 +

    Log Level

    +If you set the log level (also known as debug level) higher than 2 then you may suffer a large drop in performance. This is because the -server flushes the log file after each operation, which can be very +server flushes the log file after each operation, which can be quite expensive. -

    Read raw

    -The read raw operation is designed to be an optimised, low-latency +

    Read Raw

    +The read raw operation is designed to be an optimized, low-latency file read operation. A server may choose to not support it, -however. and Samba makes support for read raw optional, with it +however, and Samba makes support for read raw optional, with it being enabled by default.

    -In some cases clients don't handle read raw very well and actually +In some cases clients do not handle read raw very well and actually get lower performance using it than they get using the conventional read operations.

    -So you might like to try read raw = no and see what happens on your -network. It might lower, raise or not affect your performance. Only +So you might like to try read raw = no and see what happens on your +network. It might lower, raise or not effect your performance. Only testing can really tell. -

    Write raw

    -The write raw operation is designed to be an optimised, low-latency -file write operation. A server may choose to not support it, -however. and Samba makes support for write raw optional, with it -being enabled by default. +

    Write Raw

    +The write raw operation is designed to be an optimized, low-latency +file write operation. A server may choose to not support it, however, and Samba makes support for +write raw optional, with it being enabled by default.

    -Some machines may find write raw slower than normal write, in which +Some machines may find write raw slower than normal write, in which case you may wish to change this option. -

    Slow Logins

    +

    Slow Logins

    Slow logins are almost always due to the password checking time. Using -the lowest practical password level will improve things. -

    Client tuning

    +the lowest practical password level will improve things. +

    Client Tuning

    Often a speed problem can be traced to the client. The client (for example Windows for Workgroups) can often be tuned for better TCP performance. Check the sections on the various clients in -Samba and Other Clients. -

    Samba performance problem due changing kernel

    -Hi everyone. I am running Gentoo on my server and samba 2.2.8a. Recently -I changed kernel version from linux-2.4.19-gentoo-r10 to -linux-2.4.20-wolk4.0s. And now I have performance issue with samba. Ok -many of you will probably say that move to vanilla sources...well I tried -it too and it didn't work. I have 100mb LAN and two computers (linux + -Windows2000). Linux server shares directory with DivX files, client -(windows2000) plays them via LAN. Before when I was running 2.4.19 kernel -everything was fine, but now movies freezes and stops...I tried moving -files between server and Windows and it's terribly slow. -

    -Grab mii-tool and check the duplex settings on the NIC. +. +

    Samba Performance Problem Due to Changing Linux Kernel

    +A user wrote the following to the mailing list: +

    +I am running Gentoo on my server and Samba 2.2.8a. Recently +I changed kernel version from linux-2.4.19-gentoo-r10 to +linux-2.4.20-wolk4.0s. And now I have a performance issue with Samba. +Many of you will probably say, “Move to vanilla sources!” +Well, I tried that and it didn't work. I have a 100mb LAN and two computers (Linux and +Windows 2000). The Linux server shares directories with DivX files, the client +(Windows 2000) plays them via LAN. Before when I was running the 2.4.19 kernel +everything was fine, but now movies freeze and stop. I tried moving +files between the server and Windows and it is terribly slow. +

    +The answer he was given is: +

    +Grab the mii-tool and check the duplex settings on the NIC. My guess is that it is a link layer issue, not an application -layer problem. Also run ifconfig and verify that the framing -error, collisions, etc... look normal for ethernet. -

    Corrupt tdb Files

    -Well today it happened, Our first major problem using samba. -Our samba PDC server has been hosting 3 TB of data to our 500+ users -[Windows NT/XP] for the last 3 years using samba, no problem. -But today all shares went SLOW; very slow. Also the main smbd kept +layer problem. Also run ifconfig and verify that the framing +error, collisions, and so on, look normal for ethernet. +

    Corrupt tdb Files

    +Our Samba PDC server has been hosting three TB of data to our 500+ users +[Windows NT/XP] for the last three years using Samba without a problem. +Today all shares went very slow. Also the main smbd kept spawning new processes so we had 1600+ running smbd's (normally we avg. 250). -It crashed the SUN E3500 cluster twice. After a lot of searching I +It crashed the SUN E3500 cluster twice. After a lot of searching, I decided to rm /var/locks/*.tdb. Happy again.

    -Q1) Is there any method of keeping the *.tdb files in top condition or -how to early detect corruption? +Question: Is there any method of keeping the *.tdb files in top condition or +how can I detect early corruption?

    -A1) Yes, run tdbbackup each time after stopping nmbd and before starting nmbd. +Answer: Yes, run tdbbackup each time after stopping nmbd and before starting nmbd.

    -Q2) What I also would like to mention is that the service latency seems -a lot lower then before the locks cleanup, any ideas on keeping it top notch? +Question: What I also would like to mention is that the service latency seems +a lot lower than before the locks cleanup. Any ideas on keeping it top notch?

    -A2) Yes! Same answer as for Q1! -

    +Answer: Yes. Same answer as for previous question! +

    diff --git a/docs/htmldocs/swat.8.html b/docs/htmldocs/swat.8.html index a7f2eaaf5b..8e31651272 100644 --- a/docs/htmldocs/swat.8.html +++ b/docs/htmldocs/swat.8.html @@ -13,8 +13,8 @@

    -a

    This option disables authentication and puts swat in demo mode. In that mode anyone will be able to modify the smb.conf file.

    WARNING: Do NOT enable this option on a production - server.

    -V

    Prints the version number for -smbd.

    -s <configuration file>

    The file specified contains the + server.

    -V

    Prints the program version number. +

    -s <configuration file>

    The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well @@ -27,13 +27,13 @@ not specified is zero.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of +day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will -override the log level parameter +override the log level parameter in the smb.conf file.

    -l|--logfile=logbasename

    File name for log/debug files. The extension ".client" will be appended. The log file is never removed by the client. @@ -78,8 +78,8 @@ never removed by the client. by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

    The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another - excellent piece of Open Source software, available at - ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 + excellent piece of Open Source software, available at + ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.

    diff --git a/docs/htmldocs/testparm.1.html b/docs/htmldocs/testparm.1.html index 3732b53f4c..ff379ecad2 100644 --- a/docs/htmldocs/testparm.1.html +++ b/docs/htmldocs/testparm.1.html @@ -14,8 +14,8 @@ to test the output from testparm.

    OPTIONS

    -s

    Without this option, testparm will prompt for a carriage return after printing the service names and before dumping the service definitions.

    -h|--help

    Print a summary of command line options. -

    -V

    Prints the version number for -smbd.

    -L servername

    Sets the value of the %L macro to servername. +

    -V

    Prints the program version number. +

    -L servername

    Sets the value of the %L macro to servername. This is useful for testing include files specified with the %L macro.

    -v

    If this option is specified, testparm will also output all options that were not used in smb.conf(5) and are thus set to their defaults.

    -t encoding

    @@ -44,8 +44,8 @@ by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

    The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another - excellent piece of Open Source software, available at - ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 + excellent piece of Open Source software, available at + ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.

    diff --git a/docs/htmldocs/testprns.1.html b/docs/htmldocs/testprns.1.html index b63483d5de..156ec6bfec 100644 --- a/docs/htmldocs/testprns.1.html +++ b/docs/htmldocs/testprns.1.html @@ -31,8 +31,8 @@ by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

    The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another - excellent piece of Open Source software, available at - ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 + excellent piece of Open Source software, available at + ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.

    diff --git a/docs/htmldocs/troubleshooting.html b/docs/htmldocs/troubleshooting.html index d18399caeb..76880a0fff 100644 --- a/docs/htmldocs/troubleshooting.html +++ b/docs/htmldocs/troubleshooting.html @@ -1 +1 @@ -Part V. Troubleshooting +Part V. Troubleshooting diff --git a/docs/htmldocs/type.html b/docs/htmldocs/type.html index 5322995de4..b85042f009 100644 --- a/docs/htmldocs/type.html +++ b/docs/htmldocs/type.html @@ -1,5 +1,5 @@ -Part II. Server Configuration Basics

    Server Configuration Basics

    First Steps in Server Configuration

    +Part II. Server Configuration Basics

    Server Configuration Basics

    First Steps in Server Configuration

    Samba can operate in various modes within SMB networks. This HOWTO section contains information on configuring samba to function as the type of server your network requires. Please read this section carefully. -

    Table of Contents

    4. Server Types and Security Modes
    Features and Benefits
    Server Types
    Samba Security Modes
    User Level Security
    Share Level Security
    Domain Security Mode (User Level Security)
    ADS Security Mode (User Level Security)
    Server Security (User Level Security)
    Password checking
    Common Errors
    What makes Samba a SERVER?
    What makes Samba a Domain Controller?
    What makes Samba a Domain Member?
    Constantly Losing Connections to Password Server
    5. Domain Control
    Features and Benefits
    Basics of Domain Control
    Domain Controller Types
    Preparing for Domain Control
    Domain Control - Example Configuration
    Samba ADS Domain Control
    Domain and Network Logon Configuration
    Domain Network Logon Service
    Security Mode and Master Browsers
    Common Errors
    '$' cannot be included in machine name
    Joining domain fails because of existing machine account
    The system can not log you on (C000019B)....
    The machine trust account not accessible
    Account disabled
    Domain Controller Unavailable
    Can not log onto domain member workstation after joining domain
    6. Backup Domain Control
    Features And Benefits
    Essential Background Information
    MS Windows NT4 Style Domain Control
    Active Directory Domain Control
    What qualifies a Domain Controller on the network?
    How does a Workstation find its domain controller?
    Backup Domain Controller Configuration
    Example Configuration
    Common Errors
    Machine Accounts keep expiring, what can I do?
    Can Samba be a Backup Domain Controller to an NT4 PDC?
    How do I replicate the smbpasswd file?
    Can I do this all with LDAP?
    7. Domain Membership
    Features and Benefits
    MS Windows Workstation/Server Machine Trust Accounts
    Manual Creation of Machine Trust Accounts
    Using NT4 Server Manager to Add Machine Accounts to the Domain
    "On-the-Fly" Creation of Machine Trust Accounts
    Making an MS Windows Workstation or Server a Domain Member
    Domain Member Server
    Joining an NT4 type Domain with Samba-3
    Why is this better than security = server?
    Samba ADS Domain Membership
    Setup your smb.conf
    Setup your /etc/krb5.conf
    Create the computer account
    Test your server setup
    Testing with smbclient
    Notes
    Common Errors
    Can Not Add Machine Back to Domain
    Adding Machine to Domain Fails
    I can't join a Windows 2003 PDC
    8. Stand-Alone Servers
    Features and Benefits
    Background
    Example Configuration
    Reference Documentation Server
    Central Print Serving
    Common Errors
    9. MS Windows Network Configuration Guide
    Note
    +

    Table of Contents

    4. Server Types and Security Modes
    Features and Benefits
    Server Types
    Samba Security Modes
    User Level Security
    Share Level Security
    Domain Security Mode (User Level Security)
    ADS Security Mode (User Level Security)
    Server Security (User Level Security)
    Password Checking
    Common Errors
    What Makes Samba a Server?
    What Makes Samba a Domain Controller?
    What Makes Samba a Domain Member?
    Constantly Losing Connections to Password Server
    5. Domain Control
    Features and Benefits
    Basics of Domain Control
    Domain Controller Types
    Preparing for Domain Control
    Domain Control Example Configuration
    Samba ADS Domain Control
    Domain and Network Logon Configuration
    Domain Network Logon Service
    Security Mode and Master Browsers
    Common Errors
    $ Cannot Be Included in Machine Name
    Joining Domain Fails Because of Existing Machine Account
    The System Cannot Log You On (C000019B)
    The Machine Trust Account Is Not Accessible
    Account Disabled
    Domain Controller Unavailable
    Cannot Log onto Domain Member Workstation After Joining Domain
    6. Backup Domain Control
    Features and Benefits
    Essential Background Information
    MS Windows NT4-style Domain Control
    LDAP Configuration Notes
    Active Directory Domain Control
    What Qualifies a Domain Controller on the Network?
    How does a Workstation find its Domain Controller?
    Backup Domain Controller Configuration
    Example Configuration
    Common Errors
    Machine Accounts Keep Expiring
    Can Samba Be a Backup Domain Controller to an NT4 PDC?
    How Do I Replicate the smbpasswd File?
    Can I Do This All with LDAP?
    7. Domain Membership
    Features and Benefits
    MS Windows Workstation/Server Machine Trust Accounts
    Manual Creation of Machine Trust Accounts
    Managing Domain Machine Accounts using NT4 Server Manager
    On-the-Fly Creation of Machine Trust Accounts
    Making an MS Windows Workstation or Server a Domain Member
    Domain Member Server
    Joining an NT4-type Domain with Samba-3
    Why Is This Better Than security = server?
    Samba ADS Domain Membership
    Configure smb.conf
    Configure /etc/krb5.conf
    Create the Computer Account
    Testing Server Setup
    Testing with smbclient
    Notes
    Sharing User ID Mappings between Samba Domain Members
    Common Errors
    Cannot Add Machine Back to Domain
    Adding Machine to Domain Fails
    I Can't Join a Windows 2003 PDC
    8. Stand-alone Servers
    Features and Benefits
    Background
    Example Configuration
    Reference Documentation Server
    Central Print Serving
    Common Errors
    9. MS Windows Network Configuration Guide
    Note
    diff --git a/docs/htmldocs/unicode.html b/docs/htmldocs/unicode.html index a4f568576d..01cc974f5c 100644 --- a/docs/htmldocs/unicode.html +++ b/docs/htmldocs/unicode.html @@ -1,4 +1,4 @@ -Chapter 27. Unicode/Charsets

    Chapter 27. Unicode/Charsets

    Jelmer R. Vernooij

    The Samba Team

    TAKAHASHI Motonobu

    25 March 2003

    Features and Benefits

    +Chapter 27. Unicode/Charsets

    Chapter 27. Unicode/Charsets

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    TAKAHASHI Motonobu

    25 March 2003

    Features and Benefits

    Every industry eventually matures. One of the great areas of maturation is in the focus that has been given over the past decade to make it possible for anyone anywhere to use a computer. It has not always been that way, in fact, not so long @@ -6,62 +6,64 @@ ago it was common for software to be written for exclusive use in the country of origin.

    Of all the effort that has been brought to bear on providing native language support -for all computer users, the efforts of the Openi18n organisation is deserving of +for all computer users, the efforts of the Openi18n organization is deserving of special mention.

    Samba-2.x supported a single locale through a mechanism called codepages. Samba-3 is destined to become a truly trans-global -file and printer sharing platform. -

    What are charsets and unicode?

    +file and printer-sharing platform. +

    What Are Charsets and Unicode?

    Computers communicate in numbers. In texts, each number will be translated to a corresponding letter. The meaning that will be assigned -to a certain number depends on the character set(charset) +to a certain number depends on the character set (charset) that is used. +

    A charset can be seen as a table that is used to translate numbers to letters. Not all computers use the same charset (there are charsets -with German umlauts, Japanese characters, etc). Usually a charset contains +with German umlauts, Japanese characters, and so on). Usually a charset contains 256 characters, which means that storing a character with it takes exactly one byte.

    There are also charsets that support even more characters, -but those need twice(or even more) as much storage space. These +but those need twice as much storage space (or more). These charsets can contain 256 * 256 = 65536 characters, which -is more then all possible characters one could think of. They are called -multibyte charsets (because they use more then one byte to -store one character). +is more than all possible characters one could think of. They are called +multibyte charsets because they use more then one byte to +store one character.

    - A standardised multibyte charset is unicode. +A standardized multibyte charset is unicode. A big advantage of using a multibyte charset is that you only need one; there is no need to make sure two computers use the same charset when they are communicating. -

    Old windows clients use single-byte charsets, named -'codepages' by Microsoft. However, there is no support for -negotiating the charset to be used in the smb protocol. Thus, you +

    Old Windows clients use single-byte charsets, named +codepages, by Microsoft. However, there is no support for +negotiating the charset to be used in the SMB/CIFS protocol. Thus, you have to make sure you are using the same charset when talking to an older client. -Newer clients (Windows NT, 2K, XP) talk unicode over the wire. -

    Samba and charsets

    -As of samba 3.0, samba can (and will) talk unicode over the wire. Internally, -samba knows of three kinds of character sets: -

    unix charset

    +Newer clients (Windows NT, 200x, XP) talk unicode over the wire. +

    Samba and Charsets

    +As of Samba-3.0, Samba can (and will) talk unicode over the wire. Internally, +Samba knows of three kinds of character sets: +

    unix charset

    This is the charset used internally by your operating system. The default is UTF-8, which is fine for most - systems. The default in previous samba releases was ASCII. -

    display charset

    This is the charset samba will use to print messages - on your screen. It should generally be the same as the unix charset. -

    dos charset

    This is the charset samba uses when communicating with - DOS and Windows 9x clients. It will talk unicode to all newer clients. + systems, which covers all characters in all languages. The default in previous Samba releases was ASCII. +

    display charset

    This is the charset Samba will use to print messages + on your screen. It should generally be the same as the unix charset. +

    dos charset

    This is the charset Samba uses when communicating with + DOS and Windows 9x/Me clients. It will talk unicode to all newer clients. The default depends on the charsets you have installed on your system. - Run testparm -v | grep "dos charset" to see + Run testparm -v | grep "dos charset" to see what the default is on your system. -

    Conversion from old names

    Because previous samba versions did not do any charset conversion, -characters in filenames are usually not correct in the unix charset but only -for the local charset used by the DOS/Windows clients.

    Bjoern Jacke has written a utility named convm that can convert whole directory - structures to different charsets with one single command. -

    Japanese charsets

    Samba doesn't work correctly with Japanese charsets yet. Here are -points of attention when setting it up:

    • You should set mangling method = hash

    • There are various iconv() implementations around and not -all of them work equally well. glibc2's iconv() has a critical problem -in CP932. libiconv-1.8 works with CP932 but still has some problems and -does not work with EUC-JP.

    • You should set dos charset = CP932, not -Shift_JIS, SJIS...

    • Currently only unix charset = CP932 -will work (but still has some problems...) because of iconv() issues. -unix charset = EUC-JP doesn't work well because of -iconv() issues.

    • Currently Samba 3.0 does not support unix charset = UTF8-MAC/CAP/HEX/JIS*

    More information (in Japanese) is available at: http://www.atmarkit.co.jp/flinux/special/samba3/samba3a.html.

    Common errors

    CP850.so can't be found

    Samba is complaining about a missing CP850.so file”.

    CP850 is the default dos charset. The dos charset is used to convert data to the codepage used by your dos clients. If you don't have any dos clients, you can safely ignore this message.

    CP850 should be supported by your local iconv implementation. Make sure you have all the required packages installed. If you compiled samba from source, make sure configure found iconv.

    +

    Conversion from Old Names

    Because previous Samba versions did not do any charset conversion, +characters in filenames are usually not correct in the UNIX charset but only +for the local charset used by the DOS/Windows clients.

    Japanese Charsets

    Samba does not work correctly with Japanese charsets yet. Here are +points of attention when setting it up:

    • You should set mangling method = hash

    • There are various iconv() implementations around and not + all of them work equally well. glibc2's iconv() has a critical problem + in CP932. libiconv-1.8 works with CP932 but still has some problems and + does not work with EUC-JP.

    • You should set dos charset = CP932, not + Shift_JIS, SJIS.

    • Currently only UNIX charset = CP932 + will work (but still has some problems...) because of iconv() issues. + UNIX charset = EUC-JP does not work well because of + iconv() issues.

    • Currently Samba-3.0 does not support UNIX charset = UTF8-MAC/CAP/HEX/JIS*.

    More information (in Japanese) is available at: http://www.atmarkit.co.jp/flinux/special/samba3/samba3a.html.

    Common Errors

    CP850.so Can't Be Found

    Samba is complaining about a missing CP850.so file.

    Answer: CP850 is the default dos charset. + The dos charset is used to convert data to the codepage used by your dos clients. + If you do not have any dos clients, you can safely ignore this message.

    CP850 should be supported by your local iconv implementation. Make sure you have all the required packages installed. + If you compiled Samba from source, make sure to configure found iconv.

    diff --git a/docs/htmldocs/upgrading-to-3.0.html b/docs/htmldocs/upgrading-to-3.0.html index e7c1c61234..5106814203 100644 --- a/docs/htmldocs/upgrading-to-3.0.html +++ b/docs/htmldocs/upgrading-to-3.0.html @@ -1,176 +1,200 @@ -Chapter 30. Upgrading from Samba-2.x to Samba-3.0.0

    Chapter 30. Upgrading from Samba-2.x to Samba-3.0.0

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Gerald (Jerry) Carter

    Samba Team

    June 30, 2003

    New Features in Samba-3

    -Major new features: +Chapter 30. Upgrading from Samba-2.x to Samba-3.0.0

    Chapter 30. Upgrading from Samba-2.x to Samba-3.0.0

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Gerald (Jerry) Carter

    Samba Team

    June 30, 2003

    +This chapter deals exclusively with the differences between Samba-3.0.0 and Samba-2.2.8a. +It points out where configuration parameters have changed, and provides a simple guide for +the move from 2.2.x to 3.0.0. +

    Quick Migration Guide

    +Samba-3.0.0 default behavior should be approximately the same as Samba-2.2.x. +The default behavior when the new parameter passdb backend +is not defined in the smb.conf file provides the same default behviour as Samba-2.2.x +with encrypt passwords = Yes, and +will use the smbpasswd database. +

    +So why say that behavior should be approximately the same as Samba-2.2.x? Because +Samba-3.0.0 can negotiate new protocols, such as support for native Unicode, that may result in +differing protocol code paths being taken. The new behavior under such circumstances is not +exactly the same as the old one. The good news is that the domain and machine SIDs will be +preserved across the upgrade. +

    +If the Samba-2.2.x system was using an LDAP backend, and there is no time to update the LDAP +database, then make sure that passdb backend = ldapsam_compat +is specified in the smb.conf file. For the rest, behavior should remain more or less the same. +At a later date, when there is time to implement a new Samba-3 compatible LDAP backend, it is possible +to migrate the old LDAP database to the new one through use of the pdbedit. +See . +

    New Features in Samba-3

    +The major new features are:

    1. - Active Directory support. This release is able to join a ADS realm + Active Directory support. This release is able to join an ADS realm as a member server and authenticate users using LDAP/kerberos.

    2. - Unicode support. Samba will now negotiate UNICODE on the wire and - internally there is now a much better infrastructure for multi-byte - and UNICODE character sets. + Unicode support. Samba will now negotiate unicode on the wire and + internally there is a much better infrastructure for multi-byte + and unicode character sets.

    3. New authentication system. The internal authentication system has been almost completely rewritten. Most of the changes are internal, - but the new auth system is also very configurable. + but the new authoring system is also very configurable.

    4. New filename mangling system. The filename mangling system has been completely rewritten. An internal database now stores mangling maps - persistently. This needs lots of testing. + persistently.

    5. - New "net" command. A new "net" command has been added. It is - somewhat similar to the "net" command in windows. Eventually we + New “net” command. A new “net” command has been added. It is + somewhat similar to the “net” command in Windows. Eventually, we plan to replace a bunch of other utilities (such as smbpasswd) - with subcommands in "net", at the moment only a few things are - implemented. + with subcommands in “net”.

    6. Samba now negotiates NT-style status32 codes on the wire. This - improves error handling a lot. + considerably improves error handling.

    7. - Better Windows 2000/XP/2003 printing support including publishing - printer attributes in active directory + Better Windows 200x/XP printing support including publishing + printer attributes in Active Directory.

    8. - New loadable RPC modules + New loadable RPC modules for passdb backends and character sets.

    9. - New dual-daemon winbindd support (-B) for better performance + New default dual-daemon winbindd support for better performance.

    10. Support for migrating from a Windows NT 4.0 domain to a Samba - domain and maintaining user, group and domain SIDs + domain and maintaining user, group and domain SIDs.

    11. Support for establishing trust relationships with Windows NT 4.0 - domain controllers + Domain Controllers.

    12. Initial support for a distributed Winbind architecture using - an LDAP directory for storing SID to uid/gid mappings + an LDAP directory for storing SID to UID/GID mappings.

    13. Major updates to the Samba documentation tree. +

    14. + Full support for client and server SMB signing to ensure + compatibility with default Windows 2003 security settings.

    Plus lots of other improvements! -

    Configuration Parameter Changes

    -This section contains a brief listing of changes to smb.conf options -in the 3.0.0 release. Please refer to the smb.conf(5) man page for +

    Configuration Parameter Changes

    +This section contains a brief listing of changes to smb.conf options +in the 3.0.0 release. Please refer to the smb.conf(5) man page for complete descriptions of new or modified parameters. -

    Removed Parameters

    (order alphabetically):

    • admin log

    • alternate permissions

    • character set

    • client codepage

    • code page directory

    • coding system

    • domain admin group

    • domain guest group

    • force unknown acl user

    • nt smb support

    • post script

    • printer driver

    • printer driver file

    • printer driver location

    • status

    • total print jobs

    • use rhosts

    • valid chars

    • vfs options

    New Parameters

    (new parameters have been grouped by function):

    Remote management

    • abort shutdown script

    • shutdown script

    User and Group Account Management

    • add group script

    • add machine script

    • add user to group script

    • algorithmic rid base

    • delete group script

    • delete user from group script

    • passdb backend

    • set primary group script

    Authentication

    • auth methods

    • ads server

    • realm

    Protocol Options

    • client lanman auth

    • client NTLMv2 auth

    • client schannel

    • client signing

    • client use spnego

    • disable netbios

    • ntlm auth

    • paranoid server security

    • server schannel

    • smb ports

    • use spnego

    File Service

    • get quota command

    • hide special files

    • hide unwriteable files

    • hostname lookups

    • kernel change notify

    • mangle prefix

    • msdfs proxy

    • set quota command

    • use sendfile

    • vfs objects

    Printing

    • max reported print jobs

    UNICODE and Character Sets

    • display charset

    • dos charset

    • unicode

    • unix charset

    SID to uid/gid Mappings

    • idmap backend

    • idmap gid

    • idmap only

    • idmap uid

    LDAP

    • ldap delete dn

    • ldap group suffix

    • ldap idmap suffix

    • ldap machine suffix

    • ldap passwd sync

    • ldap trust ids

    • ldap user suffix

    General Configuration

    • preload modules

    • privatedir

    Modified Parameters (changes in behavior):

    • encrypt passwords (enabled by default)

    • mangling method (set to 'hash2' by default)

    • passwd chat

    • passwd program

    • restrict anonymous (integer value)

    • security (new 'ads' value)

    • strict locking (enabled by default)

    • winbind cache time (increased to 5 minutes)

    • winbind uid (deprecated in favor of 'idmap uid')

    • winbind gid (deprecated in favor of 'idmap gid')

    New Functionality

    Databases

    +

    Removed Parameters

    (Ordered Alphabetically):

    • admin log

    • alternate permissions

    • character set

    • client codepage

    • code page directory

    • coding system

    • domain admin group

    • domain guest group

    • force unknown acl user

    • nt smb support

    • post script

    • printer driver

    • printer driver file

    • printer driver location

    • status

    • stip dot

    • total print jobs

    • use rhosts

    • valid chars

    • vfs options

    New Parameters

    (New parameters have been grouped by function):

    Remote Management

    • abort shutdown script

    • shutdown script

    User and Group Account Management:

    • add group script

    • add machine script

    • add user to group script

    • algorithmic rid base

    • delete group script

    • delete user from group script

    • passdb backend

    • set primary group script

    Authentication:

    • auth methods

    • realm

    Protocol Options:

    • client lanman auth

    • client NTLMv2 auth

    • client schannel

    • client signing

    • client use spnego

    • disable netbios

    • ntlm auth

    • paranoid server security

    • server schannel

    • server signing

    • smb ports

    • use spnego

    File Service:

    • get quota command

    • hide special files

    • hide unwriteable files

    • hostname lookups

    • kernel change notify

    • mangle prefix

    • map acl inherit

    • msdfs proxy

    • set quota command

    • use sendfile

    • vfs objects

    Printing:

    • max reported print jobs

    Unicode and Character Sets:

    • display charset

    • dos charset

    • unicode

    • UNIX charset

    SID to UID/GID Mappings:

    • idmap backend

    • idmap gid

    • idmap uid

    • winbind enable local accounts

    • winbind trusted domains only

    • template primary group

    • enable rid algorithm

    LDAP:

    • ldap delete dn

    • ldap group suffix

    • ldap idmap suffix

    • ldap machine suffix

    • ldap passwd sync

    • ldap trust ids

    • ldap user suffix

    General Configuration:

    • preload modules

    • privatedir

    Modified Parameters (Changes in Behavior):

    • encrypt passwords (enabled by default)

    • mangling method (set to hash2 by default)

    • passwd chat

    • passwd program

    • password server

    • restrict anonymous (integer value)

    • security (new ads value)

    • strict locking (enabled by default)

    • winbind cache time (increased to 5 minutes)

    • winbind uid (deprecated in favor of idmap uid)

    • winbind gid (deprecated in favor of idmap gid)

    New Functionality

    Databases

    This section contains brief descriptions of any new databases - introduced in Samba 3.0. Please remember to backup your existing - ${lock directory}/*tdb before upgrading to Samba 3.0. Samba will + introduced in Samba-3. Please remember to backup your existing + ${lock directory}/*tdb before upgrading to Samba-3. Samba will upgrade databases as they are opened (if necessary), but downgrading from 3.0 to 2.2 is an unsupported path. -

    Table 30.1. TDB File Descriptions

    NameDescriptionBackup?
    account_policyUser policy settingsyes
    gencacheGeneric caching dbno
    group_mapping

    Mapping table from Windows groups/SID to unix groups

    yes
    idmap

    new ID map table from SIDS to UNIX uids/gids

    yes
    namecacheName resolution cache entriesno
    netlogon_unigrp

    Cache of universal group membership obtained when operating - as a member of a Windows domain

    no
    printing/*.tdb

    Cached output from 'lpq command' created on a per print - service basis

    no
    registry

    Read-only samba registry skeleton that provides support for - exporting various db tables via the winreg RPCs

    no

    Changes in Behavior

    - The following issues are known changes in behavior between Samba 2.2 and - Samba 3.0 that may affect certain installations of Samba. +

    + The new tdb files are described in . +

    Table 30.1. TDB File Descriptions

    NameDescriptionBackup?
    account_policyUser policy settingsyes
    gencacheGeneric caching dbno
    group_mapping

    Mapping table from Windows groups/SID to UNIX groups

    yes
    idmap

    new ID map table from SIDS to UNIX UIDs/GIDs

    yes
    namecacheName resolution cache entriesno
    netlogon_unigrp

    Cache of universal group membership obtained when operating + as a member of a Windows domain

    no
    printing/*.tdb

    Cached output from `lpq command' created on a per print + service basis

    no
    registry

    Read-only Samba registry skeleton that provides support for + exporting various db tables via the winreg RPCs

    no

    Changes in Behavior

    + The following issues are known changes in behavior between Samba-2.2 and + Samba-3 that may affect certain installations of Samba.

    1. - When operating as a member of a Windows domain, Samba 2.2 would - map any users authenticated by the remote DC to the 'guest account' - if a uid could not be obtained via the getpwnam() call. Samba 3.0 - rejects the connection as NT_STATUS_LOGON_FAILURE. There is no - current work around to re-establish the 2.2 behavior. + When operating as a member of a Windows domain, Samba-2.2 would + map any users authenticated by the remote DC to the “guest account” + if a uid could not be obtained via the getpwnam() call. Samba-3 + rejects the connection as NT_STATUS_LOGON_FAILURE. There is no + current work around to re-establish the Samba-2.2 behavior.

    2. - When adding machines to a Samba 2.2 controlled domain, the - 'add user script' was used to create the UNIX identity of the - machine trust account. Samba 3.0 introduces a new 'add machine - script' that must be specified for this purpose. Samba 3.0 will - not fall back to using the 'add user script' in the absence of - an 'add machine script' -

    Charsets

    + When adding machines to a Samba-2.2 controlled domain, the + “add user script” was used to create the UNIX identity of the + Machine Trust Account. Samba-3 introduces a new “add machine + script” that must be specified for this purpose. Samba-3 will + not fall back to using the “add user script” in the absence of + an “add machine script”. +

    Charsets

    You might experience problems with special characters when communicating with old DOS - clients. Codepage support has changed in samba 3.0. Read the chapter - Unicode support for details. -

    Passdb Backends and Authentication

    + clients. Codepage support has changed in Samba-3. Read , for details. +

    Passdb Backends and Authentication

    There have been a few new changes that Samba administrators should be - aware of when moving to Samba 3.0. + aware of when moving to Samba-3.

    1. Encrypted passwords have been enabled by default in order to - inter-operate better with out-of-the-box Windows client - installations. This does mean that either (a) a samba account - must be created for each user, or (b) 'encrypt passwords = no' - must be explicitly defined in smb.conf. + interoperate better with out-of-the-box Windows client + installations. This does mean that either (a) a Samba account + must be created for each user, or (b) “encrypt passwords = no” + must be explicitly defined in smb.conf.

    2. - Inclusion of new security = ads option for integration - with an Active Directory domain using the native Windows - Kerberos 5 and LDAP protocols. + Inclusion of new security = ads option for integration + with an Active Directory domain using the native Windows Kerberos 5 and LDAP protocols.

    - Samba 3.0 also includes the possibility of setting up chains + Samba-3 also includes the possibility of setting up chains of authentication methods - (auth methods) and account + (auth methods) and account storage backends - (passdb backend). + (passdb backend). Please refer to the smb.conf - man page and the chapter about account information databases for details. While both parameters assume sane default + man page and , for details. While both parameters assume sane default values, it is likely that you will need to understand what the values actually mean in order to ensure Samba operates correctly.

    - Certain functions of the smbpasswd(8) tool have been split between the - new smbpasswd(8) utility, the net(8) tool, and the new pdbedit(8) - utility. See the respective man pages for details. -

    Charsets

    - You might experience problems with special characters when communicating with old DOS - clients. Codepage support has changed in samba 3.0. Read the chapter - Unicode support for details. -

    LDAP

    - This section outlines the new features affecting Samba / LDAP integration. -

    New Schema

    + + Certain functions of the smbpasswd tool have been split between the + new smbpasswd utility, the net tool and the new pdbedit + utility. See the respective man pages for details. +

    LDAP

    + This section outlines the new features effecting Samba/LDAP integration. +

    New Schema

    A new object class (sambaSamAccount) has been introduced to replace - the old sambaAccount. This change aids us in the renaming of attributes - to prevent clashes with attributes from other vendors. There is a - conversion script (examples/LDAP/convertSambaAccount) to modify and LDIF + the old sambaAccount. This change aids us in the renaming of attributes + to prevent clashes with attributes from other vendors. There is a + conversion script (examples/LDAP/convertSambaAccount) to modify an LDIF file to the new schema.

    - Example: + Example:

    -		$ ldapsearch .... -b "ou=people,dc=..." > old.ldif
    +		$ ldapsearch .... -b "ou=people,dc=..." > old.ldif
     		$ convertSambaAccount <DOM SID> old.ldif new.ldif
     		

    - The <DOM SID> can be obtained by running 'net getlocalsid <DOMAINNAME> + The <DOM SID> can be obtained by running +

    +$ net getlocalsid <DOMAINNAME>
    +

    on the Samba PDC as root.

    The old sambaAccount schema may still be used by specifying the - "ldapsam_compat" passdb backend. However, the sambaAccount and + ldapsam_compat passdb backend. However, the sambaAccount and associated attributes have been moved to the historical section of the schema file and must be uncommented before use if needed. - The 2.2 object class declaration for a sambaAccount has not changed - in the 3.0 samba.schema file. + The Samba-2.2 object class declaration for a sambaAccount has not changed + in the Samba-3 samba.schema file.

    Other new object classes and their uses include:

    • - sambaDomain - domain information used to allocate rids - for users and groups as necessary. The attributes are added - in 'ldap suffix' directory entry automatically if - an idmap uid/gid range has been set and the 'ldapsam' + sambaDomain domain information used to allocate RIDs + for users and groups as necessary. The attributes are added + in “ldap suffix” directory entry automatically if + an idmap UID/GID range has been set and the “ldapsam” passdb backend has been selected.

    • - sambaGroupMapping - an object representing the + sambaGroupMapping an object representing the relationship between a posixGroup and a Windows - group/SID. These entries are stored in the 'ldap - group suffix' and managed by the 'net groupmap' command. + group/SID. These entries are stored in the “ldap + group suffix” and managed by the “net groupmap” command.

    • - sambaUnixIdPool - created in the 'ldap idmap suffix' entry - automatically and contains the next available 'idmap uid' and - 'idmap gid' + sambaUNIXIdPool created in the “ldap idmap suffix” entry + automatically and contains the next available “idmap UID” and + “idmap GID”.

    • - sambaIdmapEntry - object storing a mapping between a - SID and a UNIX uid/gid. These objects are created by the + sambaIdmapEntry object storing a mapping between a + SID and a UNIX UID/GID. These objects are created by the idmap_ldap module as needed. -

    New Suffix for Searching

    +

    New Suffix for Searching

    The following new smb.conf parameters have been added to aid in directing - certain LDAP queries when 'passdb backend = ldapsam://...' has been + certain LDAP queries when passdb backend = ldapsam://... has been specified. -

    • ldap suffix - used to search for user and computer accounts

    • ldap user suffix - used to store user accounts

    • ldap machine suffix - used to store machine trust accounts

    • ldap group suffix - location of posixGroup/sambaGroupMapping entries

    • ldap idmap suffix - location of sambaIdmapEntry objects

    - If an 'ldap suffix' is defined, it will be appended to all of the - remaining sub-suffix parameters. In this case, the order of the suffix - listings in smb.conf is important. Always place the 'ldap suffix' first +

    • ldap suffix used to search for user and computer accounts.

    • ldap user suffix used to store user accounts.

    • ldap machine suffix used to store Machine Trust Accounts.

    • ldap group suffix location of posixGroup/sambaGroupMapping entries.

    • ldap idmap suffix location of sambaIdmapEntry objects.

    + If an ldap suffix is defined, it will be appended to all of the + remaining sub-suffix parameters. In this case, the order of the suffix + listings in smb.conf is important. Always place the ldap suffix first in the list.

    - Due to a limitation in Samba's smb.conf parsing, you should not surround - the DN's with quotation marks. -

    IdMap LDAP support

    - Samba 3.0 supports an ldap backend for the idmap subsystem. The - following options would inform Samba that the idmap table should be - stored on the directory server onterose in the "ou=idmap,dc=plainjoe, - dc=org" partition. -

    [global]
    ...
    idmap backend = ldap:ldap://onterose/
    ldap idmap suffix = ou=idmap,dc=plainjoe,dc=org
    idmap uid = 40000-50000
    idmap gid = 40000-50000

    - This configuration allows winbind installations on multiple servers to - share a uid/gid number space, thus avoiding the interoperability problems - with NFS that were present in Samba 2.2. -

    + Due to a limitation in Samba's smb.conf parsing, you should not surround + the DNs with quotation marks. +

    IdMap LDAP Support

    + Samba-3 supports an ldap backend for the idmap subsystem. The + following options inform Samba that the idmap table should be + stored on the directory server onterose in the "ou=idmap,dc=quenya,dc=org" partition. +

    [global]
    ...
    idmap backend = ldap:ldap://onterose/
    ldap idmap suffix = ou=idmap,dc=quenya,dc=org
    idmap uid = 40000-50000
    idmap gid = 40000-50000

    + This configuration allows Winbind installations on multiple servers to + share a UID/GID number space, thus avoiding the interoperability problems + with NFS that were present in Samba-2.2. +

    diff --git a/docs/htmldocs/vfstest.1.html b/docs/htmldocs/vfstest.1.html index 2cfbfad283..e0efbfdf3f 100644 --- a/docs/htmldocs/vfstest.1.html +++ b/docs/htmldocs/vfstest.1.html @@ -8,8 +8,8 @@

    -l|--logfile=logbasename

    File name for log/debug files. The extension '.client' will be appended. The log file is never removed by the client. -

    -V

    Prints the version number for -smbd.

    -s <configuration file>

    The file specified contains the +

    -V

    Prints the program version number. +

    -s <configuration file>

    The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well @@ -22,13 +22,13 @@ not specified is zero.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of +day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will -override the log level parameter +override the log level parameter in the smb.conf file.

    -l|--logfile=logbasename

    File name for log/debug files. The extension ".client" will be appended. The log file is never removed by the client. diff --git a/docs/htmldocs/wbinfo.1.html b/docs/htmldocs/wbinfo.1.html index f5f5af0a27..9cdc7e0906 100644 --- a/docs/htmldocs/wbinfo.1.html +++ b/docs/htmldocs/wbinfo.1.html @@ -70,8 +70,8 @@

    -X group

    Delete an existing local winbindd group.

    -Y sid

    Convert a SID to a UNIX group id. If the SID does not correspond to a UNIX group mapped by winbindd(8) then - the operation will fail.

    -V

    Prints the version number for -smbd.

    -h|--help

    Print a summary of command line options. + the operation will fail.

    -V

    Prints the program version number. +

    -h|--help

    Print a summary of command line options.

    EXIT STATUS

    The wbinfo program returns 0 if the operation succeeded, or 1 if the operation failed. If the winbindd(8) daemon is not working wbinfo will always return failure.

    VERSION

    This man page is correct for version 3.0 of diff --git a/docs/htmldocs/winbind.html b/docs/htmldocs/winbind.html index 1ee1de9f2f..480746898f 100644 --- a/docs/htmldocs/winbind.html +++ b/docs/htmldocs/winbind.html @@ -1,6 +1,6 @@ -Chapter 21. Winbind: Use of Domain Accounts

    Chapter 21. Winbind: Use of Domain Accounts

    Tim Potter

    Andrew Tridgell

    Samba Team

    Naag Mummaneni

    Notes for Solaris

    John Trostel

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    27 June 2002

    Features and Benefits

    +Chapter 21. Winbind: Use of Domain Accounts

    Chapter 21. Winbind: Use of Domain Accounts

    Tim Potter

    Andrew Tridgell

    Samba Team

    Naag Mummaneni

    Notes for Solaris

    John Trostel

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    27 June 2002

    Features and Benefits

    Integration of UNIX and Microsoft Windows NT through a unified logon has - been considered a "holy grail" in heterogeneous computing environments for + been considered a “holy grail” in heterogeneous computing environments for a long time.

    There is one other facility without which UNIX and Microsoft Windows network @@ -8,150 +8,149 @@ mechanism for sharing files across UNIX systems and to be able to assign domain user and group ownerships with integrity.

    - winbind is a component of the Samba suite of programs + winbind is a component of the Samba suite of programs that solves the unified logon problem. Winbind uses a UNIX implementation of Microsoft RPC calls, Pluggable Authentication Modules, and the Name Service Switch to allow Windows NT domain users to appear and operate as UNIX users on a UNIX - machine. This chapter describes the winbind system, explaining the functionality + machine. This chapter describes the Winbind system, explaining the functionality it provides, how it is configured, and how it works internally.

    Winbind provides three separate functions:

    • - Authentication of user credentials (via PAM) + Authentication of user credentials (via PAM).

    • - Identity resolution (via NSS)` + Identity resolution (via NSS).

    • - Windindd maintains a database called winbind_idmap.tdb in which it stores + Winbind maintains a database called winbind_idmap.tdb in which it stores mappings between UNIX UIDs / GIDs and NT SIDs. This mapping is used only for users and groups that do not have a local UID/GID. It stored the UID/GID allocated from the idmap uid/gid range that it has mapped to the NT SID. If idmap backend has been specified as ldapsam:url - then instead of using a local mapping winbindd will obtain this information + then instead of using a local mapping Winbind will obtain this information from the LDAP database.

    Note

    - If winbindd is not running, then smbd (which calls winbindd) will fall back to - using purely local information from /etc/passwd and /etc/group and no dynamic + If winbindd is not running, smbd (which calls winbindd) will fall back to + using purely local information from /etc/passwd and /etc/group and no dynamic mapping will be used. -

    Introduction

    It is well known that UNIX and Microsoft Windows NT have +

    Introduction

    It is well known that UNIX and Microsoft Windows NT have different models for representing user and group information and use different technologies for implementing them. This fact has made it difficult to integrate the two systems in a satisfactory manner.

    One common solution in use today has been to create identically named user accounts on both the UNIX and Windows systems and use the Samba suite of programs to provide file and print services - between the two. This solution is far from perfect however, as + between the two. This solution is far from perfect, however, as adding and deleting users on both sets of machines becomes a chore - and two sets of passwords are required both of which + and two sets of passwords are required both of which can lead to synchronization problems between the UNIX and Windows systems and confusion for users.

    We divide the unified logon problem for UNIX machines into - three smaller problems:

    • Obtaining Windows NT user and group information -

    • Authenticating Windows NT users -

    • Password changing for Windows NT users + three smaller problems:

      • Obtaining Windows NT user and group information. +

      • Authenticating Windows NT users. +

      • Password changing for Windows NT users.

      Ideally, a prospective solution to the unified logon problem would satisfy all the above components without duplication of information on the UNIX machines and without creating additional tasks for the system administrator when maintaining users and - groups on either system. The winbind system provides a simple + groups on either system. The Winbind system provides a simple and elegant solution to all three components of the unified logon - problem.

    What Winbind Provides

    Winbind unifies UNIX and Windows NT account management by - allowing a UNIX box to become a full member of a NT domain. Once + problem.

    What Winbind Provides

    Winbind unifies UNIX and Windows NT account management by + allowing a UNIX box to become a full member of an NT domain. Once this is done the UNIX box will see NT users and groups as if - they were native UNIX users and groups, allowing the NT domain + they were “native” UNIX users and groups, allowing the NT domain to be used in much the same manner that NIS+ is used within UNIX-only environments.

    The end result is that whenever any program on the UNIX machine asks the operating system to lookup a user or group name, the query will be resolved by asking the - NT domain controller for the specified domain to do the lookup. + NT Domain Controller for the specified domain to do the lookup. Because Winbind hooks into the operating system at a low level - (via the NSS name resolution modules in the C library) this - redirection to the NT domain controller is completely + (via the NSS name resolution modules in the C library), this + redirection to the NT Domain Controller is completely transparent.

    Users on the UNIX machine can then use NT user and group - names as they would use "native" UNIX names. They can chown files - so that they are owned by NT domain users or even login to the + names as they would “native” UNIX names. They can chown files + so they are owned by NT domain users or even login to the UNIX machine and run a UNIX X-Window session as a domain user.

    The only obvious indication that Winbind is being used is - that user and group names take the form DOMAIN\user and - DOMAIN\group. This is necessary as it allows Winbind to determine - that redirection to a domain controller is wanted for a particular + that user and group names take the form DOMAIN\user and + DOMAIN\group. This is necessary as it allows Winbind to determine + that redirection to a Domain Controller is wanted for a particular lookup and which trusted domain is being referenced.

    Additionally, Winbind provides an authentication service that hooks into the Pluggable Authentication Modules (PAM) system - to provide authentication via a NT domain to any PAM enabled + to provide authentication via an NT domain to any PAM-enabled applications. This capability solves the problem of synchronizing passwords between systems since all passwords are stored in a single - location (on the domain controller).

    Target Uses

    Winbind is targeted at organizations that have an - existing NT based domain infrastructure into which they wish + location (on the Domain Controller).

    Target Uses

    Winbind is targeted at organizations that have an + existing NT-based domain infrastructure into which they wish to put UNIX workstations or servers. Winbind will allow these organizations to deploy UNIX workstations without having to maintain a separate account infrastructure. This greatly simplifies the administrative overhead of deploying UNIX - workstations into a NT based organization.

    Another interesting way in which we expect Winbind to - be used is as a central part of UNIX based appliances. Appliances - that provide file and print services to Microsoft based networks + workstations into an NT-based organization.

    Another interesting way in which we expect Winbind to + be used is as a central part of UNIX-based appliances. Appliances + that provide file and print services to Microsoft-based networks will be able to use Winbind to provide seamless integration of - the appliance into the domain.

    How Winbind Works

    The winbind system is designed around a client/server + the appliance into the domain.

    How Winbind Works

    The Winbind system is designed around a client/server architecture. A long running winbindd daemon listens on a UNIX domain socket waiting for requests to arrive. These requests are generated by the NSS and PAM - clients and processed sequentially.

    The technologies used to implement winbind are described - in detail below.

    Microsoft Remote Procedure Calls

    Over the last few years, efforts have been underway + clients and is processed sequentially.

    The technologies used to implement Winbind are described + in detail below.

    Microsoft Remote Procedure Calls

    Over the last few years, efforts have been underway by various Samba Team members to decode various aspects of the Microsoft Remote Procedure Call (MSRPC) system. This - system is used for most network related operations between + system is used for most network-related operations between Windows NT machines including remote management, user authentication and print spooling. Although initially this work was done to aid the implementation of Primary Domain Controller (PDC) - functionality in Samba, it has also yielded a body of code which + functionality in Samba, it has also yielded a body of code that can be used for other purposes.

    Winbind uses various MSRPC calls to enumerate domain users and groups and to obtain detailed information about individual users or groups. Other MSRPC calls can be used to authenticate NT domain users and to change user passwords. By directly querying - a Windows PDC for user and group information, winbind maps the - NT account information onto UNIX user and group names.

    Microsoft Active Directory Services

    + a Windows PDC for user and group information, Winbind maps the + NT account information onto UNIX user and group names.

    Microsoft Active Directory Services

    Since late 2001, Samba has gained the ability to - interact with Microsoft Windows 2000 using its 'Native - Mode' protocols, rather than the NT4 RPC services. - Using LDAP and Kerberos, a domain member running - winbind can enumerate users and groups in exactly the - same way as a Win2k client would, and in so doing - provide a much more efficient and - effective winbind implementation. -

    Name Service Switch

    The Name Service Switch, or NSS, is a feature that is + interact with Microsoft Windows 2000 using its “Native + Mode” protocols, rather than the NT4 RPC services. + Using LDAP and Kerberos, a Domain Member running + Winbind can enumerate users and groups in exactly the + same way as a Windows 200x client would, and in so doing + provide a much more efficient and effective Winbind implementation. +

    Name Service Switch

    The Name Service Switch, or NSS, is a feature that is present in many UNIX operating systems. It allows system information such as hostnames, mail aliases and user information to be resolved from different sources. For example, a standalone UNIX workstation may resolve system information from a series of flat files stored on the local filesystem. A networked workstation may first attempt to resolve system information from local files, - and then consult a NIS database for user information or a DNS server - for hostname information.

    The NSS application programming interface allows winbind + and then consult an NIS database for user information or a DNS server + for hostname information.

    The NSS application programming interface allows Winbind to present itself as a source of system information when - resolving UNIX usernames and groups. Winbind uses this interface, + resolving UNIX usernames and groups. Winbind uses this interface, and information obtained from a Windows NT server using MSRPC - calls to provide a new source of account enumeration. Using standard + calls to provide a new source of account enumeration. Using standard UNIX library calls, one can enumerate the users and groups on - a UNIX machine running winbind and see all users and groups in + a UNIX machine running Winbind and see all users and groups in a NT domain plus any trusted domain as though they were local users and groups.

    The primary control file for NSS is /etc/nsswitch.conf. - When a UNIX application makes a request to do a lookup + When a UNIX application makes a request to do a lookup, the C library looks in /etc/nsswitch.conf - for a line which matches the service type being requested, for - example the "passwd" service type is used when user or group names - are looked up. This config line specifies which implementations + for a line that matches the service type being requested, for + example the “passwd” service type is used when user or group names + are looked up. This config line specifies which implementations of that service should be tried and in what order. If the passwd - config line is:

    -passwd: files example
    +		config line is:

    +		passwd: files example
     		

    then the C library will first load a module called /lib/libnss_files.so followed by the module /lib/libnss_example.so. The C library will dynamically load each of these modules in turn and call resolver functions within the modules to try to resolve - the request. Once the request is resolved the C library returns the - result to the application.

    This NSS interface provides a very easy way for Winbind + the request. Once the request is resolved, the C library returns the + result to the application.

    This NSS interface provides an easy way for Winbind to hook into the operating system. All that needs to be done is to put libnss_winbind.so in /lib/ - then add "winbind" into /etc/nsswitch.conf at + then add “winbind” into /etc/nsswitch.conf at the appropriate place. The C library will then call Winbind to - resolve user and group names.

    Pluggable Authentication Modules

    Pluggable Authentication Modules, also known as PAM, + resolve user and group names.

    Pluggable Authentication Modules

    Pluggable Authentication Modules, also known as PAM, is a system for abstracting authentication and authorization technologies. With a PAM module it is possible to specify different authentication methods for different system applications without @@ -168,101 +167,93 @@ passwd: files example

    PAM is configured by providing control files in the directory /etc/pam.d/ for each of the services that require authentication. When an authentication request is made - by an application the PAM code in the C library looks up this + by an application, the PAM code in the C library looks up this control file to determine what modules to load to do the authentication check and in what order. This interface makes adding - a new authentication service for Winbind very easy, all that needs + a new authentication service for Winbind very easy. All that needs to be done is that the pam_winbind.so module is copied to /lib/security/ and the PAM control files for relevant services are updated to allow - authentication via winbind. See the PAM documentation - for more details.

    User and Group ID Allocation

    When a user or group is created under Windows NT - is it allocated a numerical relative identifier (RID). This is - slightly different to UNIX which has a range of numbers that are + authentication via Winbind. See the PAM documentation + in for more information.

    User and Group ID Allocation

    When a user or group is created under Windows NT/200x + it is allocated a numerical relative identifier (RID). This is + slightly different from UNIX which has a range of numbers that are used to identify users, and the same range in which to identify - groups. It is winbind's job to convert RIDs to UNIX id numbers and - vice versa. When winbind is configured it is given part of the UNIX - user id space and a part of the UNIX group id space in which to + groups. It is Winbind's job to convert RIDs to UNIX ID numbers and + vice versa. When Winbind is configured, it is given part of the UNIX + user ID space and a part of the UNIX group ID space in which to store Windows NT users and groups. If a Windows NT user is - resolved for the first time, it is allocated the next UNIX id from + resolved for the first time, it is allocated the next UNIX ID from the range. The same process applies for Windows NT groups. Over - time, winbind will have mapped all Windows NT users and groups - to UNIX user ids and group ids.

    The results of this mapping are stored persistently in + time, Winbind will have mapped all Windows NT users and groups + to UNIX user IDs and group IDs.

    The results of this mapping are stored persistently in an ID mapping database held in a tdb database). This ensures that - RIDs are mapped to UNIX IDs in a consistent way.

    Result Caching

    An active system can generate a lot of user and group - name lookups. To reduce the network cost of these lookups winbind + RIDs are mapped to UNIX IDs in a consistent way.

    Result Caching

    + + An active system can generate a lot of user and group + name lookups. To reduce the network cost of these lookups, Winbind uses a caching scheme based on the SAM sequence number supplied - by NT domain controllers. User or group information returned - by a PDC is cached by winbind along with a sequence number also + by NT Domain Controllers. User or group information returned + by a PDC is cached by Winbind along with a sequence number also returned by the PDC. This sequence number is incremented by Windows NT whenever any user or group information is modified. If a cached entry has expired, the sequence number is requested from the PDC and compared against the sequence number of the cached entry. If the sequence numbers do not match, then the cached information - is discarded and up to date information is requested directly - from the PDC.

    Installation and Configuration

    Introduction

    -This section describes the procedures used to get winbind up and -running. Winbind is capable of providing access + is discarded and up-to-date information is requested directly + from the PDC.

    Installation and Configuration

    Introduction

    +This section describes the procedures used to get Winbind up and +running. Winbind is capable of providing access and authentication control for Windows Domain users through an NT -or Win2K PDC for 'regular' services, such as telnet a nd ftp, as -well for SAMBA services. +or Windows 200x PDC for regular services, such as telnet and ftp, as +well for Samba services.

    • - Why should I to this? -

      This allows the SAMBA administrator to rely on the - authentication mechanisms on the NT/Win2K PDC for the authentication - of domain members. NT/Win2K users no longer need to have separate - accounts on the SAMBA server. + Why should I do this? +

      This allows the Samba administrator to rely on the + authentication mechanisms on the Windows NT/200x PDC for the authentication + of Domain Members. Windows NT/200x users no longer need to have separate + accounts on the Samba server.

    • Who should be reading this document?

      - This HOWTO is designed for system administrators. If you are - implementing SAMBA on a file server and wish to (fairly easily) - integrate existing NT/Win2K users from your PDC onto the - SAMBA server, this HOWTO is for you. That said, I am no NT or PAM - expert, so you may find a better or easier way to accomplish - these tasks. -

    Requirements

    -If you have a Samba configuration file that you are currently -using... BACK IT UP! If your system already uses PAM, -back up the /etc/pam.d directory -contents! If you haven't already made a boot disk, -MAKE ONE NOW! + This document is designed for system administrators. If you are + implementing Samba on a file server and wish to (fairly easily) + integrate existing Windows NT/200x users from your PDC onto the + Samba server, this document is for you. +

    Requirements

    +If you have a Samba configuration file that you are currently using, BACK IT UP! +If your system already uses PAM, back up the /etc/pam.d directory +contents! If you haven't already made a boot disk, MAKE ONE NOW!

    -Messing with the PAM configuration files can make it nearly impossible -to log in to your machine. That's why you want to be able to boot back -into your machine in single user mode and restore your -/etc/pam.d back to the original state they were in if -you get frustrated with the way things are going. ;-) +Messing with the PAM configuration files can make it nearly impossible to log in to your machine. That's +why you want to be able to boot back into your machine in single user mode and restore your +/etc/pam.d back to the original state they were in if you get frustrated with the +way things are going.

    -The latest version of SAMBA (version 3.0 as of this writing), now -includes a functioning winbindd daemon. Please refer to the -main SAMBA web page or, -better yet, your closest SAMBA mirror site for instructions on -downloading the source code. +The latest version of Samba-3 includes a functioning winbindd daemon. Please refer to the main Samba Web page or, better yet, your closest Samba mirror site for +instructions on downloading the source code.

    -To allow Domain users the ability to access SAMBA shares and -files, as well as potentially other services provided by your -SAMBA machine, PAM (pluggable authentication modules) must -be setup properly on your machine. In order to compile the -winbind modules, you should have at least the pam libraries resident -on your system. For recent RedHat systems (7.1, for instance), that -means pam-0.74-22. For best results, it is helpful to also -install the development packages in pam-devel-0.74-22. -

    Testing Things Out

    -Before starting, it is probably best to kill off all the SAMBA -related daemons running on your server. Kill off all smbd, -nmbd, and winbindd processes that may -be running. To use PAM, you will want to make sure that you have the -standard PAM package which supplies the /etc/pam.d -directory structure, including the pam modules are used by pam-aware -services, several pam libraries, and the /usr/doc -and /usr/man entries for pam. Winbind built better -in SAMBA if the pam-devel package was also installed. This package includes -the header files needed to compile pam-aware applications. -

    Configure nsswitch.conf and the -winbind libraries on Linux and Solaris

    -The libraries needed to run the winbindd daemon -through nsswitch need to be copied to their proper locations, so +To allow domain users the ability to access Samba shares and files, as well as potentially other services +provided by your Samba machine, PAM must be set up properly on your +machine. In order to compile the Winbind modules, you should have at least the PAM development libraries installed +on your system. Please refer the PAM web site http://www.kernel.org/pub/linux/libs/pam/. +

    Testing Things Out

    +Before starting, it is probably best to kill off all the Samba-related daemons running on your server. +Kill off all smbd, nmbd, and winbindd processes that may be running. To use PAM, +make sure that you have the standard PAM package that supplies the /etc/pam.d +directory structure, including the PAM modules that are used by PAM-aware services, several pam libraries, +and the /usr/doc and /usr/man entries for pam. Winbind built +better in Samba if the pam-devel package is also installed. This package includes the header files +needed to compile PAM-aware applications. +

    Configure nsswitch.conf and the Winbind Libraries on Linux and Solaris

    +PAM is a standard component of most current generation UNIX/Linux systems. Unfortunately, few systems install +the pam-devel libraries that are needed to build PAM-enabled Samba. Additionally, Samba-3 +may auto-install the Winbind files into their correct locations on your system, so before you get too far down +the track be sure to check if the following configuration is really +necessary. You may only need to configure +/etc/nsswitch.conf. +

    +The libraries needed to run the winbindd daemon through nsswitch need to be copied to their proper locations:

     root# cp ../samba/source/nsswitch/libnss_winbind.so /lib
    @@ -278,94 +269,91 @@ I also found it necessary to make the following symbolic link:
     

    Now, as root you need to edit /etc/nsswitch.conf to allow user and group entries to be visible from the winbindd -daemon. My /etc/nsswitch.conf file look like +daemon. My /etc/nsswitch.conf file look like this after editing:

     	passwd:     files winbind
     	shadow:     files 
     	group:      files winbind
     

    -The libraries needed by the winbind daemon will be automatically +The libraries needed by the winbindd daemon will be automatically entered into the ldconfig cache the next time -your system reboots, but it -is faster (and you don't need to reboot) if you do it manually: +your system reboots, but it is faster (and you do not need to reboot) if you do it manually:

    root# /sbin/ldconfig -v | grep winbind

    This makes libnss_winbind available to winbindd and echos back a check to you. -

    NSS Winbind on AIX

    (This section is only for those running AIX)

    -The winbind AIX identification module gets built as libnss_winbind.so in the -nsswitch directory of the samba source. This file can be copied to -/usr/lib/security, and the AIX naming convention would indicate that it -should be named WINBIND. A stanza like the following: +

    NSS Winbind on AIX

    (This section is only for those running AIX.)

    +The Winbind AIX identification module gets built as libnss_winbind.so in the +nsswitch directory of the Samba source. This file can be copied to /usr/lib/security, +and the AIX naming convention would indicate that it should be named WINBIND. A stanza like the following:

     WINBIND:
             program = /usr/lib/security/WINBIND
             options = authonly
    -

    can then be added to -/usr/lib/security/methods.cfg. This module only -supports identification, but there have been success reports using the -standard winbind pam module for authentication. Use caution configuring -loadable authentication modules as it is possible to make it impossible -to logon to the system. More information about the AIX authentication -module API can be found at "Kernel Extensions and Device Support -Programming Concepts for AIX": -Chapter 18. Loadable Authentication Module Programming Interface -and more information on administering the modules at -"System Management Guide: Operating System and Devices". -

    Configure smb.conf

    -Several parameters are needed in the smb.conf file to control -the behavior of winbindd. Configure -smb.conf These are described in more detail in -the winbindd(8) man page. My -smb.conf file was modified to -include the following entries in the [global] section: -

    Example 21.1. smb.conf for winbind set-up

    [global]
    ...
    # separate domain and username with '+', like DOMAIN+username
    winbind separator = +
    # use uids from 10000 to 20000 for domain users
    idmap uid = 10000-20000
    # use gids from 10000 to 20000 for domain groups
    winbind gid = 10000-20000
    # allow enumeration of winbind users and groups
    winbind enum users = yes
    winbind enum groups = yes
    # give winbind users a real shell (only needed if they have telnet access)
    template homedir = /home/winnt/%D/%U
    template shell = /bin/bash

    Join the SAMBA server to the PDC domain

    -Enter the following command to make the SAMBA server join the +

    +can then be added to /usr/lib/security/methods.cfg. This module only supports +identification, but there have been success reports using the standard Winbind PAM module for +authentication. Use caution configuring loadable authentication +modules since you can make +it impossible to logon to the system. More information about the AIX authentication module API can +be found at “Kernel Extensions and Device Support Programming Concepts for AIX +in Chapter 18(John, there is no section like this in 18). Loadable Authentication Module Programming +Interface and more information on administering the modules +can be found at System +Management Guide: Operating System and Devices. +

    Configure smb.conf

    +Several parameters are needed in the smb.conf file to control the behavior of winbindd. These +are described in more detail in the winbindd(8) man page. My smb.conf file, as shown in , was modified to include the necessary entries in the [global] section. +

    Example 21.1. smb.conf for Winbind set-up

    [global]
    # separate domain and username with '+', like DOMAIN+username
    winbind separator = +
    # use uids from 10000 to 20000 for domain users
    idmap uid = 10000-20000
    # use gids from 10000 to 20000 for domain groups
    winbind gid = 10000-20000
    # allow enumeration of winbind users and groups
    winbind enum users = yes
    winbind enum groups = yes
    # give winbind users a real shell (only needed if they have telnet access)
    template homedir = /home/winnt/%D/%U
    template shell = /bin/bash

    Join the Samba Server to the PDC Domain

    +Enter the following command to make the Samba server join the PDC domain, where DOMAIN is the name of your Windows domain and Administrator is a domain user who has administrative privileges in the domain.

    root# /usr/local/samba/bin/net rpc join -S PDC -U Administrator

    -The proper response to the command should be: "Joined the domain -DOMAIN" where DOMAIN +The proper response to the command should be: “Joined the domain +DOMAIN” where DOMAIN is your DOMAIN name. -

    Start up the winbindd daemon and test it!

    -Eventually, you will want to modify your smb startup script to +

    Starting and Testing the winbindd Daemon

    +Eventually, you will want to modify your Samba startup script to automatically invoke the winbindd daemon when the other parts of -SAMBA start, but it is possible to test out just the winbind -portion first. To start up winbind services, enter the following +Samba start, but it is possible to test out just the Winbind +portion first. To start up Winbind services, enter the following command as root:

    root# /usr/local/samba/bin/winbindd -

    -Winbindd can now also run in 'dual daemon mode'. This will make it -run as 2 processes. The first will answer all requests from the cache, +

    Note

    +The above assumes that Samba has been installed in the /usr/local/samba +directory tree. You may need to search for the location of Samba files if this is not the +location of winbindd on your system. +

    +Winbindd can now also run in “dual daemon modei”. This will make it +run as two processes. The first will answer all requests from the cache, thus making responses to clients faster. The other will update the cache for the query that the first has just responded. -Advantage of this is that responses stay accurate and are faster. +The advantage of this is that responses stay accurate and are faster. You can enable dual daemon mode by adding -B to the commandline:

    root# /usr/local/samba/bin/winbindd -B

    -I'm always paranoid and like to make sure the daemon -is really running... +I'm always paranoid and like to make sure the daemon is really running.

    root# ps -ae | grep winbindd

    -This command should produce output like this, if the daemon is running +This command should produce output like this, if the daemon is running you would expect +to see a report something like this:

     3025 ?        00:00:00 winbindd
     

    -Now... for the real test, try to get some information about the -users on your PDC +Now, for the real test, try to get some information about the users on your PDC:

    root# /usr/local/samba/bin/wbinfo -u

    This should echo back a list of users on your Windows users on -your PDC. For example, I get the following response: +your PDC. For example, I get the following response:

     	CEO+Administrator
     	CEO+burdell
    @@ -374,10 +362,9 @@ your PDC.  For example, I get the following response:
     	CEO+krbtgt
     	CEO+TsInternetUser
     

    - Obviously, I have named my domain 'CEO' and my winbind separator is '+'. +Obviously, I have named my domain “CEO” and my winbind separator is “+”.

    -You can do the same sort of thing to get group information from -the PDC: +You can do the same sort of thing to get group information from the PDC:

     root# /usr/local/samba/bin/wbinfo -g
     	CEO+Domain Admins
    @@ -390,43 +377,41 @@ the PDC:
     	CEO+Enterprise Admins
     	CEO+Group Policy Creator Owners
     

    -The function 'getent' can now be used to get unified -lists of both local and PDC users and groups. -Try the following command: +The function getent can now be used to get unified +lists of both local and PDC users and groups. Try the following command:

    root# getent passwd

    You should get a list that looks like your /etc/passwd -list followed by the domain users with their new uids, gids, home +list followed by the domain users with their new UIDs, GIDs, home directories and default shells.

    -The same thing can be done for groups with the command +The same thing can be done for groups with the command:

    root# getent group -

    Fix the init.d startup scripts

    Linux

    -The winbindd daemon needs to start up after the -smbd and nmbd daemons are running. +

    Fix the init.d Startup Scripts

    Linux

    +The winbindd daemon needs to start up after the smbd and nmbd daemons are running. To accomplish this task, you need to modify the startup scripts of your system. -They are located at /etc/init.d/smb in RedHat and -/etc/init.d/samba in Debian. -script to add commands to invoke this daemon in the proper sequence. My +They are located at /etc/init.d/smb in Red Hat Linux and they are located in +/etc/init.d/samba in Debian Linux. Edit your +script to add commands to invoke this daemon in the proper sequence. My startup script starts up smbd, nmbd, and winbindd from the -/usr/local/samba/bin directory directly. The 'start' +/usr/local/samba/bin directory directly. The start function in the script looks like this:

     start() {
    -        KIND="SMB"
    -        echo -n $"Starting $KIND services: "
    +        KIND="SMB"
    +        echo -n $"Starting $KIND services: "
             daemon /usr/local/samba/bin/smbd $SMBDOPTIONS
             RETVAL=$?
             echo
    -        KIND="NMB"
    -        echo -n $"Starting $KIND services: "
    +        KIND="NMB"
    +        echo -n $"Starting $KIND services: "
             daemon /usr/local/samba/bin/nmbd $NMBDOPTIONS
             RETVAL2=$?
             echo
    -        KIND="Winbind"
    -        echo -n $"Starting $KIND services: "
    +        KIND="Winbind"
    +        echo -n $"Starting $KIND services: "
             daemon /usr/local/samba/bin/winbindd
             RETVAL3=$?
             echo
    @@ -435,7 +420,7 @@ start() {
             return $RETVAL
     }
     

    If you would like to run winbindd in dual daemon mode, replace -the line +the line :

             daemon /usr/local/samba/bin/winbindd
     

    @@ -446,34 +431,35 @@ in the example above with: daemon /usr/local/samba/bin/winbindd -B

    .

    -The 'stop' function has a corresponding entry to shut down the +The stop function has a corresponding entry to shut down the services and looks like this:

     stop() {
    -        KIND="SMB"
    -        echo -n $"Shutting down $KIND services: "
    +        KIND="SMB"
    +        echo -n $"Shutting down $KIND services: "
             killproc smbd
             RETVAL=$?
             echo
    -        KIND="NMB"
    -        echo -n $"Shutting down $KIND services: "
    +        KIND="NMB"
    +        echo -n $"Shutting down $KIND services: "
             killproc nmbd
             RETVAL2=$?
             echo
    -        KIND="Winbind"
    -        echo -n $"Shutting down $KIND services: "
    +        KIND="Winbind"
    +        echo -n $"Shutting down $KIND services: "
             killproc winbindd
             RETVAL3=$?
             [ $RETVAL -eq 0 -a $RETVAL2 -eq 0 -a $RETVAL3 -eq 0 ] && \
     		 rm -f /var/lock/subsys/smb
    -        echo ""
    +        echo ""
             return $RETVAL
     }
    -
    Solaris

    Winbind doesn't work on Solaris 9, see the Portability chapter for details.

    On Solaris, you need to modify the -/etc/init.d/samba.server startup script. It usually -only starts smbd and nmbd but should now start winbindd too. If you -have samba installed in /usr/local/samba/bin, -the file could contains something like this: +

    Solaris

    +Winbind does not work on Solaris 9, see for details. +

    +On Solaris, you need to modify the /etc/init.d/samba.server startup script. It +usually only starts smbd and nmbd but should now start winbindd, too. If you have Samba installed in +/usr/local/samba/bin, the file could contains something like this:

     	##
     	## samba.server
    @@ -488,12 +474,12 @@ the file could contains something like this:
     		pid=`/usr/bin/ps -e |
     		     /usr/bin/grep -w $1 |
     		     /usr/bin/sed -e 's/^  *//' -e 's/ .*//'`
    -		[ "$pid" != "" ] && kill $pid
    +		[ "$pid" != "" ] && kill $pid
     	}
     	 
    -	# Start/stop processes required for samba server
    +	# Start/stop processes required for Samba server
     
    -	case "$1" in
    +	case "$1" in
     
     	'start')
     	#
    @@ -518,204 +504,238 @@ the file could contains something like this:
     	   ;;
     
     	*)
    -	   echo "Usage: /etc/init.d/samba.server { start | stop }"
    +	   echo "Usage: /etc/init.d/samba.server { start | stop }"
     	   ;;
     	esac
     

    -Again, if you would like to run samba in dual daemon mode, replace +Again, if you would like to run Samba in dual daemon mode, replace:

     	/usr/local/samba/bin/winbindd
     

    - in the script above with: -

     	/usr/local/samba/bin/winbindd -B
     

    -

    Restarting

    +

    Restarting

    If you restart the smbd, nmbd, and winbindd daemons at this point, you -should be able to connect to the samba server as a domain member just as +should be able to connect to the Samba server as a Domain Member just as if you were a local user. -

    Configure Winbind and PAM

    -If you have made it this far, you know that winbindd and samba are working -together. If you want to use winbind to provide authentication for other -services, keep reading. The pam configuration files need to be altered in -this step. (Did you remember to make backups of your original +

    Configure Winbind and PAM

    +If you have made it this far, you know that winbindd and Samba are working +together. If you want to use Winbind to provide authentication for other +services, keep reading. The PAM configuration files need to be altered in +this step. (Did you remember to make backups of your original /etc/pam.d files? If not, do it now.)

    -You will need a pam module to use winbindd with these other services. This +You will need a PAM module to use winbindd with these other services. This module will be compiled in the ../source/nsswitch directory -by invoking the command +by invoking the command:

    root# make nsswitch/pam_winbind.so

    -from the ../source directory. The +from the ../source directory. The pam_winbind.so file should be copied to the location of -your other pam security modules. On my RedHat system, this was the -/lib/security directory. On Solaris, the pam security +your other PAM security modules. On my RedHat system, this was the +/lib/security directory. On Solaris, the PAM security modules reside in /usr/lib/security.

    root# cp ../samba/source/nsswitch/pam_winbind.so /lib/security -

    Linux/FreeBSD-specific PAM configuration

    +

    Linux/FreeBSD-specific PAM configuration

    The /etc/pam.d/samba file does not need to be changed. I just left this file as it was:

     	auth    required        /lib/security/pam_stack.so service=system-auth
     	account required        /lib/security/pam_stack.so service=system-auth
     

    -The other services that I modified to allow the use of winbind +The other services that I modified to allow the use of Winbind as an authentication service were the normal login on the console (or a terminal -session), telnet logins, and ftp service. In order to enable these +session), telnet logins, and ftp service. In order to enable these services, you may first need to change the entries in -/etc/xinetd.d (or /etc/inetd.conf). -RedHat 7.1 uses the new xinetd.d structure, in this case you need +/etc/xinetd.d (or /etc/inetd.conf). +Red Hat Linux 7.1 and later uses the new xinetd.d structure, in this case you need to change the lines in /etc/xinetd.d/telnet and /etc/xinetd.d/wu-ftp from

     	enable = no
     

    -to +to:

     	enable = yes
     

    For ftp services to work properly, you will also need to either have individual directories for the domain users already present on the server, or change the home directory template to a general -directory for all domain users. These can be easily set using +directory for all domain users. These can be easily set using the smb.conf global entry -template homedir. +template homedir.

    The /etc/pam.d/ftp file can be changed -to allow winbind ftp access in a manner similar to the -samba file. My /etc/pam.d/ftp file was +to allow Winbind ftp access in a manner similar to the +samba file. My /etc/pam.d/ftp file was changed to look like this:

    -	auth       required     /lib/security/pam_listfile.so item=user sense=deny \
    -		 file=/etc/ftpusers onerr=succeed
    -	auth       sufficient   /lib/security/pam_winbind.so
    -	auth       required     /lib/security/pam_stack.so service=system-auth
    -	auth       required     /lib/security/pam_shells.so
    -	account    sufficient   /lib/security/pam_winbind.so
    -	account    required     /lib/security/pam_stack.so service=system-auth
    -	session    required     /lib/security/pam_stack.so service=system-auth
    +auth       required     /lib/security/pam_listfile.so item=user sense=deny \
    +	 file=/etc/ftpusers onerr=succeed
    +auth       sufficient   /lib/security/pam_winbind.so
    +auth       required     /lib/security/pam_stack.so service=system-auth
    +auth       required     /lib/security/pam_shells.so
    +account    sufficient   /lib/security/pam_winbind.so
    +account    required     /lib/security/pam_stack.so service=system-auth
    +session    required     /lib/security/pam_stack.so service=system-auth
     

    The /etc/pam.d/login file can be changed nearly the -same way. It now looks like this: +same way. It now looks like this:

    -	auth       required     /lib/security/pam_securetty.so
    -	auth       sufficient   /lib/security/pam_winbind.so
    -	auth       sufficient   /lib/security/pam_unix.so use_first_pass
    -	auth       required     /lib/security/pam_stack.so service=system-auth
    -	auth       required     /lib/security/pam_nologin.so
    -	account    sufficient   /lib/security/pam_winbind.so
    -	account    required     /lib/security/pam_stack.so service=system-auth
    -	password   required     /lib/security/pam_stack.so service=system-auth
    -	session    required     /lib/security/pam_stack.so service=system-auth
    -	session    optional     /lib/security/pam_console.so
    +auth       required     /lib/security/pam_securetty.so
    +auth       sufficient   /lib/security/pam_winbind.so
    +auth       sufficient   /lib/security/pam_UNIX.so use_first_pass
    +auth       required     /lib/security/pam_stack.so service=system-auth
    +auth       required     /lib/security/pam_nologin.so
    +account    sufficient   /lib/security/pam_winbind.so
    +account    required     /lib/security/pam_stack.so service=system-auth
    +password   required     /lib/security/pam_stack.so service=system-auth
    +session    required     /lib/security/pam_stack.so service=system-auth
    +session    optional     /lib/security/pam_console.so
     

    In this case, I added the

    auth sufficient /lib/security/pam_winbind.so

    lines as before, but also added the

    required pam_securetty.so

    -above it, to disallow root logins over the network. I also added a +above it, to disallow root logins over the network. I also added a

    sufficient /lib/security/pam_unix.so use_first_pass

    line after the winbind.so line to get rid of annoying double prompts for passwords. -

    Solaris-specific configuration

    -The /etc/pam.conf needs to be changed. I changed this file so that my Domain -users can logon both locally as well as telnet.The following are the changes -that I made.You can customize the pam.conf file as per your requirements,but +

    Solaris-specific configuration

    +The /etc/pam.conf needs to be changed. I changed this file so my Domain +users can logon both locally as well as telnet. The following are the changes +that I made. You can customize the pam.conf file as per your requirements, but be sure of those changes because in the worst case it will leave your system nearly impossible to boot.

    -	#
    -	#ident	"@(#)pam.conf	1.14	99/09/16 SMI"
    -	#
    -	# Copyright (c) 1996-1999, Sun Microsystems, Inc.
    -	# All Rights Reserved.
    -	#
    -	# PAM configuration
    -	#
    -	# Authentication management
    -	#
    -	login   auth required   /usr/lib/security/pam_winbind.so
    -	login	auth required 	/usr/lib/security/$ISA/pam_unix.so.1 try_first_pass 
    -	login	auth required 	/usr/lib/security/$ISA/pam_dial_auth.so.1 try_first_pass 
    -	#
    -	rlogin  auth sufficient /usr/lib/security/pam_winbind.so
    -	rlogin  auth sufficient /usr/lib/security/$ISA/pam_rhosts_auth.so.1
    -	rlogin	auth required 	/usr/lib/security/$ISA/pam_unix.so.1 try_first_pass
    -	#
    -	dtlogin auth sufficient /usr/lib/security/pam_winbind.so
    -	dtlogin	auth required 	/usr/lib/security/$ISA/pam_unix.so.1 try_first_pass
    -	#
    -	rsh	auth required	/usr/lib/security/$ISA/pam_rhosts_auth.so.1
    -	other   auth sufficient /usr/lib/security/pam_winbind.so
    -	other	auth required	/usr/lib/security/$ISA/pam_unix.so.1 try_first_pass
    -	#
    -	# Account management
    -	#
    -	login   account sufficient      /usr/lib/security/pam_winbind.so
    -	login	account requisite	/usr/lib/security/$ISA/pam_roles.so.1 
    -	login	account required	/usr/lib/security/$ISA/pam_unix.so.1 
    -	#
    -	dtlogin account sufficient      /usr/lib/security/pam_winbind.so
    -	dtlogin	account requisite	/usr/lib/security/$ISA/pam_roles.so.1 
    -	dtlogin	account required	/usr/lib/security/$ISA/pam_unix.so.1 
    -	#
    -	other   account sufficient      /usr/lib/security/pam_winbind.so
    -	other	account requisite	/usr/lib/security/$ISA/pam_roles.so.1 
    -	other	account required	/usr/lib/security/$ISA/pam_unix.so.1 
    -	#
    -	# Session management
    -	#
    -	other	session required	/usr/lib/security/$ISA/pam_unix.so.1 
    -	#
    -	# Password management
    -	#
    -	#other   password sufficient     /usr/lib/security/pam_winbind.so
    -	other	password required	/usr/lib/security/$ISA/pam_unix.so.1 
    -	dtsession auth required	/usr/lib/security/$ISA/pam_unix.so.1
    -	#
    -	# Support for Kerberos V5 authentication (uncomment to use Kerberos)
    -	#
    -	#rlogin	auth optional	/usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
    -	#login	auth optional	/usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
    -	#dtlogin	auth optional	/usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
    -	#other	auth optional	/usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
    -	#dtlogin	account optional /usr/lib/security/$ISA/pam_krb5.so.1
    -	#other	account optional /usr/lib/security/$ISA/pam_krb5.so.1
    -	#other	session optional /usr/lib/security/$ISA/pam_krb5.so.1
    -	#other	password optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
    +#
    +#ident "@(#)pam.conf 1.14 99/09/16 SMI"
    +#
    +# Copyright (c) 1996-1999, Sun Microsystems, Inc.
    +# All Rights Reserved.
    +#
    +# PAM configuration
    +#
    +# Authentication management
    +#
    +login   auth required   /usr/lib/security/pam_winbind.so
    +login auth required  /usr/lib/security/$ISA/pam_UNIX.so.1 try_first_pass 
    +login auth required  /usr/lib/security/$ISA/pam_dial_auth.so.1 try_first_pass 
    +#
    +rlogin  auth sufficient /usr/lib/security/pam_winbind.so
    +rlogin  auth sufficient /usr/lib/security/$ISA/pam_rhosts_auth.so.1
    +rlogin auth required  /usr/lib/security/$ISA/pam_UNIX.so.1 try_first_pass
    +#
    +dtlogin auth sufficient /usr/lib/security/pam_winbind.so
    +dtlogin auth required  /usr/lib/security/$ISA/pam_UNIX.so.1 try_first_pass
    +#
    +rsh auth required /usr/lib/security/$ISA/pam_rhosts_auth.so.1
    +other   auth sufficient /usr/lib/security/pam_winbind.so
    +other auth required /usr/lib/security/$ISA/pam_UNIX.so.1 try_first_pass
    +#
    +# Account management
    +#
    +login   account sufficient      /usr/lib/security/pam_winbind.so
    +login account requisite /usr/lib/security/$ISA/pam_roles.so.1 
    +login account required /usr/lib/security/$ISA/pam_UNIX.so.1 
    +#
    +dtlogin account sufficient      /usr/lib/security/pam_winbind.so
    +dtlogin account requisite /usr/lib/security/$ISA/pam_roles.so.1 
    +dtlogin account required /usr/lib/security/$ISA/pam_UNIX.so.1 
    +#
    +other   account sufficient      /usr/lib/security/pam_winbind.so
    +other account requisite /usr/lib/security/$ISA/pam_roles.so.1 
    +other account required /usr/lib/security/$ISA/pam_UNIX.so.1 
    +#
    +# Session management
    +#
    +other session required /usr/lib/security/$ISA/pam_UNIX.so.1 
    +#
    +# Password management
    +#
    +#other   password sufficient     /usr/lib/security/pam_winbind.so
    +other password required /usr/lib/security/$ISA/pam_UNIX.so.1 
    +dtsession auth required /usr/lib/security/$ISA/pam_UNIX.so.1
    +#
    +# Support for Kerberos V5 authentication (uncomment to use Kerberos)
    +#
    +#rlogin auth optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
    +#login auth optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
    +#dtlogin auth optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
    +#other auth optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
    +#dtlogin account optional /usr/lib/security/$ISA/pam_krb5.so.1
    +#other account optional /usr/lib/security/$ISA/pam_krb5.so.1
    +#other session optional /usr/lib/security/$ISA/pam_krb5.so.1
    +#other password optional /usr/lib/security/$ISA/pam_krb5.so.1 try_first_pass
     

    -I also added a try_first_pass line after the winbind.so line to get rid of -annoying double prompts for passwords. +I also added a try_first_pass line after the winbind.so +line to get rid of annoying double prompts for passwords.

    Now restart your Samba and try connecting through your application that you configured in the pam.conf. -

    Conclusion

    The winbind system, through the use of the Name Service - Switch, Pluggable Authentication Modules, and appropriate - Microsoft RPC calls have allowed us to provide seamless - integration of Microsoft Windows NT domain users on a - UNIX system. The result is a great reduction in the administrative - cost of running a mixed UNIX and NT network.

    Common Errors

    Winbind has a number of limitations in its current +

    Conclusion

    The Winbind system, through the use of the Name Service +Switch, Pluggable Authentication Modules, and appropriate +Microsoft RPC calls have allowed us to provide seamless +integration of Microsoft Windows NT domain users on a +UNIX system. The result is a great reduction in the administrative +cost of running a mixed UNIX and NT network.

    Common Errors

    Winbind has a number of limitations in its current released version that we hope to overcome in future releases:

    • Winbind is currently only available for - the Linux, Solaris, AIX and IRIX operating systems, although ports to other operating + the Linux, Solaris, AIX, and IRIX operating systems, although ports to other operating systems are certainly possible. For such ports to be feasible, we require the C library of the target operating system to support the Name Service Switch and Pluggable Authentication Modules systems. This is becoming more common as NSS and - PAM gain support among UNIX vendors.

    • The mappings of Windows NT RIDs to UNIX ids + PAM gain support among UNIX vendors.

    • The mappings of Windows NT RIDs to UNIX IDs is not made algorithmically and depends on the order in which - unmapped users or groups are seen by winbind. It may be difficult - to recover the mappings of rid to UNIX id mapping if the file - containing this information is corrupted or destroyed.

    • Currently the winbind PAM module does not take + unmapped users or groups are seen by Winbind. It may be difficult + to recover the mappings of RID to UNIX ID mapping if the file + containing this information is corrupted or destroyed.

    • Currently the Winbind PAM module does not take into account possible workstation and logon time restrictions - that may be been set for Windows NT users, this is - instead up to the PDC to enforce.

    NSCD Problem Warning

    Note

    - Do NOT under ANY circumstances run nscd on any system - on which winbind is running. + that may be set for Windows NT users, this is + instead up to the PDC to enforce.

    NSCD Problem Warning

    Warning

    + Do not under any circumstances run nscd on any system + on which winbindd is running.

    If nscd is running on the UNIX/Linux system, then - even though NSSWITCH is correctly configured it will NOT be possible to resolve + even though NSSWITCH is correctly configured it will not be possible to resolve domain users and groups for file and directory controls. -

    +

    Winbind Is Not Resolving Users and Groups

    + My smb.conf file is correctly configured. I have specified + idmap uid = 12000, + and idmap gid = 3000-3500 + and winbind is running. When I do the following it all works fine. +

    +root# wbinfo -u
    +MIDEARTH+maryo
    +MIDEARTH+jackb
    +MIDEARTH+ameds
    +...
    +MIDEARTH+root
    +
    +root# wbinfo -g
    +MIDEARTH+Domain Users
    +MIDEARTH+Domain Admins
    +MIDEARTH+Domain Guests
    +...
    +MIDEARTH+Accounts
    +
    +root# getent passwd
    +root:x:0:0:root:/root:/bin/bash
    +bin:x:1:1:bin:/bin:/bin/bash
    +...
    +maryo:x:15000:15003:Mary Orville:/home/MIDEARTH/maryo:/bin/false
    +

    +But the following command just fails: +

    +root# chown maryo a_file
    +chown: `maryo': invalid user
    +
    +This is driving me nuts! What can be wrong? +”

    +Same problem as the one above. +Your system is likely running nscd, the name service +caching daemon. Shut it down, do not restart it! You will find your problem resolved. +

    diff --git a/docs/htmldocs/winbindd.8.html b/docs/htmldocs/winbindd.8.html index 7b2d6e0261..6dd9819c0e 100644 --- a/docs/htmldocs/winbindd.8.html +++ b/docs/htmldocs/winbindd.8.html @@ -49,8 +49,8 @@ group: files winbind package, or the AIX process monitor.

    -S

    If specified, this parameter causes winbindd to log to standard output rather - than a file.

    -V

    Prints the version number for -smbd.

    -s <configuration file>

    The file specified contains the + than a file.

    -V

    Prints the program version number. +

    -s <configuration file>

    The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well @@ -63,13 +63,13 @@ not specified is zero.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of +day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will -override the log level parameter +override the log level parameter in the smb.conf file.

    -l|--logfile=logbasename

    File name for log/debug files. The extension ".client" will be appended. The log file is never removed by the client. @@ -108,15 +108,15 @@ never removed by the client. and group rids.

    CONFIGURATION

    Configuration of the winbindd daemon is done through configuration parameters in the smb.conf(5) file. All parameters should be specified in the [global] section of smb.conf.

    EXAMPLE SETUP

    To setup winbindd for user and group lookups plus + winbind separator

  • + idmap uid

  • + idmap gid

  • + winbind cache time

  • + winbind enum users

  • + winbind enum groups

  • + template homedir

  • + template shell

  • + winbind use default domain

  • EXAMPLE SETUP

    To setup winbindd for user and group lookups plus authentication from a domain controller use something like the following setup. This was tested on a RedHat 6.2 Linux box.

    In /etc/nsswitch.conf put the following: -- cgit

    Chapter 36. How to compile Samba

    Jelmer R. Vernooij

    The Samba Team

    Andrew Tridgell

    Samba Team

    22 May 2001

    18 March 2003

    -You can obtain the samba source from the -samba website. To obtain a development version, -you can download samba from CVS or using rsync. -

    Access Samba source code via CVS

    Introduction

    -Samba is developed in an open environment. Developers use CVS -(Concurrent Versioning System) to "checkin" (also known as -"commit") new source code. Samba's various CVS branches can +Chapter 36. How to Compile Samba

    Chapter 36. How to Compile Samba

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Andrew Tridgell

    Samba Team

    22 May 2001

    18 March 2003

    +You can obtain the Samba source from the +Samba Website. To obtain a development version, +you can download Samba from CVS or using rsync. +

    Access Samba Source Code via CVS

    Introduction

    + +Samba is developed in an open environment. Developers use +Concurrent Versioning System (CVS) to “checkin” (also known as +“commit”) new source code. Samba's various CVS branches can be accessed via anonymous CVS using the instructions detailed in this chapter.

    This chapter is a modified version of the instructions found at -http://samba.org/samba/cvs.html -

    CVS Access to samba.org

    +http://samba.org/samba/cvs.html +

    CVS Access to samba.org

    The machine samba.org runs a publicly accessible CVS repository for access to the source code of several packages, -including samba, rsync, distcc, ccache and jitterbug. There are two main ways -of accessing the CVS server on this host. -

    Access via CVSweb

    -You can access the source code via your -favourite WWW browser. This allows you to access the contents of -individual files in the repository and also to look at the revision +including Samba, rsync, distcc, ccache, and jitterbug. There are two main ways +of accessing the CVS server on this host: +

    Access via CVSweb

    + +You can access the source code via your favorite WWW browser. This allows you to access +the contents of individual files in the repository and also to look at the revision history and commit logs of individual files. You can also ask for a diff listing between any two versions on the repository.

    -Use the URL : http://samba.org/cgi-bin/cvsweb -

    Access via cvs

    +Use the URL: +http://samba.org/cgi-bin/CVSweb +

    Access via CVS

    You can also access the source code via a -normal cvs client. This gives you much more control over what you can +normal CVS client. This gives you much more control over what you can do with the repository and allows you to checkout whole source trees -and keep them up to date via normal cvs commands. This is the +and keep them up-to-date via normal CVS commands. This is the preferred method of access if you are a developer and not just a casual browser.

    -To download the latest cvs source code, point your +To download the latest CVS source code, point your browser at the URL : -http://www.cyclic.com/. -and click on the 'How to get cvs' link. CVS is free software under -the GNU GPL (as is Samba). Note that there are several graphical CVS clients -which provide a graphical interface to the sometimes mundane CVS commands. -Links to theses clients are also available from the Cyclic website. +http://www.cyclic.com/. +and click on the “How to get CVS” link. CVS is free software under +the GNU GPL (as is Samba). Note that there are several graphical CVS clients +that provide a graphical interface to the sometimes mundane CVS commands. +Links to theses clients are also available from the Cyclic Web site.

    -To gain access via anonymous cvs use the following steps. +To gain access via anonymous CVS, use the following steps. For this example it is assumed that you want a copy of the -samba source code. For the other source code repositories -on this system just substitute the correct package name -

    Procedure 36.1. Retrieving samba using CVS

    1. - Install a recent copy of cvs. All you really need is a - copy of the cvs client binary. +Samba source code. For the other source code repositories +on this system just substitute the correct package name. +

      Procedure 36.1. Retrieving Samba using CVS

      1. + Install a recent copy of CVS. All you really need is a + copy of the CVS client binary.

      2. - Run the command + Run the command:

        cvs -d :pserver:cvs@samba.org:/cvsroot login

      3. - When it asks you for a password type cvs. + When it asks you for a password, type cvs.

      4. Run the command

        - cvs -d :pserver:cvs@samba.org:/cvsroot co samba + cvs -d :pserver:CVS@samba.org:/cvsroot co samba.

        - This will create a directory called samba containing the - latest samba source code (i.e. the HEAD tagged cvs branch). This + This will create a directory called samba containing the + latest Samba source code (i.e., the HEAD tagged CVS branch). This currently corresponds to the 3.0 development tree.

        CVS branches other then HEAD can be obtained by using the - -r and defining a tag name. A list of branch tag names - can be found on the "Development" page of the samba web site. A common - request is to obtain the latest 3.0 release code. This could be done by + -r and defining a tag name. A list of branch tag names + can be found on the “Development” page of the Samba Web site. A common + request is to obtain the latest 3.0 release code. This could be done by using the following command:

        - cvs -d :pserver:cvs@samba.org:/cvsroot co -r SAMBA_3_0 samba + cvs -d :pserver:cvs@samba.org:/cvsroot co -r SAMBA_3_0 samba.

      5. - Whenever you want to merge in the latest code changes use - the following command from within the samba directory: + Whenever you want to merge in the latest code changes, use + the following command from within the Samba directory:

        cvs update -d -P -

    Accessing the samba sources via rsync and ftp

    - pserver.samba.org also exports unpacked copies of most parts of the CVS - tree at ftp://pserver.samba.org/pub/unpacked and also via anonymous rsync at - rsync://pserver.samba.org/ftp/unpacked/. I recommend using rsync rather than ftp. - See the rsync homepage for more info on rsync. +

    Accessing the Samba Sources via rsync and ftp

    + + + pserver.samba.org also exports unpacked copies of most parts of the CVS + tree at ftp://pserver.samba.org/pub/unpacked and also via anonymous rsync at + rsync://pserver.samba.org/ftp/unpacked/. I recommend using rsync rather than ftp. + See the rsync homepage for more info on rsync.

    The disadvantage of the unpacked trees is that they do not support automatic - merging of local changes like CVS does. rsync access is most convenient - for an initial install. -

    Verifying Samba's PGP signature

    -In these days of insecurity, it's strongly recommended that you verify the PGP -signature for any source file before installing it. Even if you're not -downloading from a mirror site, verifying PGP signatures should be a -standard reflex. + merging of local changes like CVS does. rsync access is most convenient + for an initial install. +

    Verifying Samba's PGP Signature

    + +It is strongly recommended that you verify the PGP signature for any source file before +installing it. Even if you're not downloading from a mirror site, verifying PGP signatures +should be a standard reflex. Many people today use the GNU GPG toolset in place of PGP. +GPG can substitute for PGP.

    With that said, go ahead and download the following files:

     $ wget http://us1.samba.org/samba/ftp/samba-2.2.8a.tar.asc
     $ wget http://us1.samba.org/samba/ftp/samba-pubkey.asc
     

    - + The first file is the PGP signature for the Samba source file; the other is the Samba public PGP key itself. Import the public PGP key with:

     $ gpg --import samba-pubkey.asc
     

    -And verify the Samba source code integrity with: +and verify the Samba source code integrity with:

     $ gzip -d samba-2.2.8a.tar.gz
     $ gpg --verify samba-2.2.8a.tar.asc
     

    -If you receive a message like, "Good signature from Samba Distribution -Verification Key..." +If you receive a message like, “Good signature from Samba Distribution Verification Key...” then all is well. The warnings about trust relationships can be ignored. An example of what you would not want to see would be: -

    - - gpg: BAD signature from "Samba Distribution Verification Key" - -

    Building the Binaries

    - To do this, first run the program ./configure +

    +     gpg: BAD signature from “Samba Distribution Verification Key”
    +

    Building the Binaries

    + + To build the binaries, first run the program ./configure in the source directory. This should automatically configure Samba for your operating system. If you have unusual - needs then you may wish to run

    root# ./configure --help
    -

    first to see what special options you can enable. - Then executing

    root# make

    will create the binaries. Once it's successfully - compiled you can use

    root# make install

    to install the binaries and manual pages. You can + needs, then you may wish to run

    root# ./configure --help
    +

    first to see what special options you can enable. Now execute ./configure with any arguments it might need:

    root# ./configure [... arguments ...]

    Executing

    + +

    root# make

    will create the binaries. Once it is successfully + compiled you can use

    root# make install

    to install the binaries and manual pages. You can separately install the binaries and/or man pages using

    root# make installbin
     

    and

    root# make installman
    -	

    Note that if you are upgrading for a previous version +

    Note that if you are upgrading from a previous version of Samba you might like to know that the old versions of - the binaries will be renamed with a ".old" extension. You + the binaries will be renamed with an “.old” extension. You can go back to the previous version with

    root# make revert
    -

    if you find this version a disaster!

    Compiling samba with Active Directory support

    In order to compile samba with ADS support, you need to have installed - on your system:

    • the MIT kerberos development libraries - (either install from the sources or use a package). The - Heimdal libraries will not work.

    • the OpenLDAP development libraries.

    If your kerberos libraries are in a non-standard location then +

    if you find this version a disaster!

    Compiling Samba with Active Directory Support

    In order to compile Samba with ADS support, you need to have installed + on your system:

    • The MIT or Heimdal kerberos development libraries + (either install from the sources or use a package).

    • The OpenLDAP development libraries.

    If your kerberos libraries are in a non-standard location, then remember to add the configure option - --with-krb5=DIR.

    After you run configure make sure that - include/config.h it generates contains lines like + --with-krb5=DIR.

    After you run configure, make sure that + include/config.h it generates contain lines like this:

     #define HAVE_KRB5 1
     #define HAVE_LDAP 1
    -

    If it doesn't then configure did not find your krb5 libraries or - your ldap libraries. Look in config.log to figure - out why and fix it.

    Installing the required packages for Debian

    On Debian you need to install the following packages:

    -

    • libkrb5-dev

    • krb5-user

    -

    Installing the required packages for RedHat

    On RedHat this means you should have at least:

    -

    • krb5-workstation (for kinit)

    • krb5-libs (for linking with)

    • krb5-devel (because you are compiling from source)

    -

    in addition to the standard development environment.

    Note that these are not standard on a RedHat install, and you may need - to get them off CD2.

    Starting the smbd and nmbd

    You must choose to start smbd and nmbd either +

    If it does not, configure did not find your KRB5 libraries or + your LDAP libraries. Look in config.log to figure + out why and fix it.

    Installing the Required Packages for Debian

    On Debian, you need to install the following packages:

    +

    • libkrb5-dev
    • krb5-user

    +

    Installing the Required Packages for Red Hat Linux

    On Red Hat Linux, this means you should have at least:

    +

    • krb5-workstation (for kinit)
    • krb5-libs (for linking with)
    • krb5-devel (because you are compiling from source)

    +

    in addition to the standard development environment.

    If these files are not installed on your system, you should check the installation + CDs to find which has them and install the files using your tool of choice. If in doubt + about what tool to use, refer to the Red Hat Linux documentation.

    SuSE Linux Package Requirements

    SuSE Linux installs Heimdal packages that may be required to allow you to build + binary packages. You should verify that the development libraries have been installed on + your system. +

    SuSE Linux Samba RPMs support Kerberos. Please refer to the documentation for + your SuSE Linux system for information regading SuSE Linux specific configuration. + Additionally, SuSE are very active in the maintenance of Samba packages that provide + the maximum capabilities that are available. You should consider using SuSE provided + packages where they are available. +

    Starting the smbd and nmbd

    + + You must choose to start smbd and nmbd either as daemons or from inetd. Don't try to do both! Either you can put them in inetd.conf and have them started on demand @@ -153,48 +167,54 @@ example of what you would not want to see would be: daemons either from the command line or in /etc/rc.local. See the man pages for details on the command line options. Take particular care to read - the bit about what user you need to be in order to start - Samba. In many cases you must be root.

    The main advantage of starting smbd + the bit about what user you need to have to start + Samba. In many cases, you must be root.

    The main advantage of starting smbd and nmbd using the recommended daemon method is that they will respond slightly more quickly to an initial connection - request.

    Starting from inetd.conf

    Note

    The following will be different if + request.

    Starting from inetd.conf

    Note

    The following will be different if you use NIS, NIS+ or LDAP to distribute services maps.

    Look at your /etc/services. - What is defined at port 139/tcp. If nothing is defined - then add a line like this:

    netbios-ssn     139/tcp

    similarly for 137/udp you should have an entry like:

    netbios-ns	137/udp

    Next edit your /etc/inetd.conf - and add two lines something like this:

    +		What is defined at port 139/tcp? If nothing is defined, 
    +		then add a line like this:

    netbios-ssn     139/tcp

    Similarly for 137/udp, you should have an entry like:

    netbios-ns	137/udp

    Next, edit your /etc/inetd.conf + and add two lines like this:

     		netbios-ssn stream tcp nowait root /usr/local/samba/bin/smbd smbd 
     		netbios-ns dgram udp wait root /usr/local/samba/bin/nmbd nmbd 
     		

    The exact syntax of /etc/inetd.conf - varies between unixes. Look at the other entries in inetd.conf - for a guide.

    Some distributions use xinetd instead of inetd. Consult the - xinetd manual for configuration information.

    Note

    Some unixes already have entries like netbios_ns + varies between UNIXes. Look at the other entries in inetd.conf + for a guide.

    + + Some distributions use xinetd instead of inetd. Consult the + xinetd manual for configuration information.

    Note

    Some UNIXes already have entries like netbios_ns (note the underscore) in /etc/services. - You must either edit /etc/services or + You must edit /etc/services or /etc/inetd.conf to make them consistent. -

    Note

    On many systems you may need to use the - interfaces option in smb.conf to specify the IP +

    Note

    + + On many systems you may need to use the + interfaces option in smb.conf to specify the IP address and netmask of your interfaces. Run ifconfig - as root if you don't know what the broadcast is for your + as root if you do not know what the broadcast is for your net. nmbd tries to determine it at run - time, but fails on some unixes. -

    Warning

    Many unixes only accept around 5 + time, but fails on some UNIXes. +

    Warning

    Many UNIXes only accept around five parameters on the command line in inetd.conf. This means you shouldn't use spaces between the options and - arguments, or you should use a script, and start the script + arguments, or you should use a script and start the script from inetd.

    Restart inetd, perhaps just send it a HUP.

     			root# killall -HUP inetd
    -		

    Alternative: starting it as a daemon

    To start the server as a daemon you should create +

    Alternative: Starting smbd as a Daemon

    + + To start the server as a daemon, you should create a script something like this one, perhaps calling it startsmb.

     		#!/bin/sh
     		/usr/local/samba/bin/smbd -D 
     		/usr/local/samba/bin/nmbd -D 
    -		

    then make it executable with chmod +

    Make it executable with chmod +x startsmb

    You can then run startsmb by - hand or execute it from /etc/rc.local -

    To kill it send a kill signal to the processes - nmbd and smbd.

    Note

    If you use the SVR4 style init system then + hand or execute it from /etc/rc.local. +

    To kill it, send a kill signal to the processes + nmbd and smbd.

    Note

    If you use the SVR4 style init system, you may like to look at the examples/svr4-startup - script to make Samba fit into that system.

    + script to make Samba fit into that system.

    diff --git a/docs/htmldocs/diagnosis.html b/docs/htmldocs/diagnosis.html index ea84661d30..3b76bc41c0 100644 --- a/docs/htmldocs/diagnosis.html +++ b/docs/htmldocs/diagnosis.html @@ -1,287 +1,311 @@ -Chapter 33. The Samba checklist

    Chapter 33. The Samba checklist

    Andrew Tridgell

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    Wed Jan 15

    Introduction

    +Chapter 33. The Samba Checklist

    Chapter 33. The Samba Checklist

    Andrew Tridgell

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    Dan Shearer

    Samba Team

    Wed Jan 15

    Introduction

    This file contains a list of tests you can perform to validate your Samba server. It also tells you what the likely cause of the problem -is if it fails any one of these steps. If it passes all these tests +is if it fails any one of these steps. If it passes all these tests, then it is probably working fine.

    -You should do ALL the tests, in the order shown. We have tried to +You should do all the tests, in the order shown. We have tried to carefully choose them so later tests only use capabilities verified in -the earlier tests. However, do not stop at the first error as there +the earlier tests. However, do not stop at the first error as there have been some instances when continuing with the tests has helped to solve a problem.

    -If you send one of the samba mailing lists an email saying "it doesn't work" -and you have not followed this test procedure then you should not be surprised +If you send one of the Samba mailing lists an email saying, “it does not work” +and you have not followed this test procedure, you should not be surprised if your email is ignored. -

    Assumptions

    -In all of the tests it is assumed you have a Samba server called +

    Assumptions

    +In all of the tests, it is assumed you have a Samba server called BIGSERVER and a PC called ACLIENT both in workgroup TESTGROUP.

    The procedure is similar for other types of clients.

    It is also assumed you know the name of an available share in your -smb.conf. I will assume this share is called tmp. -You can add a tmp share like this by adding the -following to smb.conf: -

    Example 33.1. smb.conf with [tmp] share

    [tmp]
    comment = temporary files
    path = /tmp
    read only = yes

    +smb.conf. I will assume this share is called tmp. +You can add a tmp share like this by adding the +lines shown in . +

    Example 33.1. smb.conf with [tmp] share

    [tmp]
    comment = temporary files
    path = /tmp
    read only = yes

    Note

    -These tests assume version 3.0 or later of the samba suite. +These tests assume version 3.0.0 or later of the Samba suite. Some commands shown did not exist in earlier versions.

    Please pay attention to the error messages you receive. If any error message -reports that your server is being unfriendly you should first check that your -IP name resolution is correctly set up. eg: Make sure your /etc/resolv.conf +reports that your server is being unfriendly, you should first check that your +IP name resolution is correctly set up. Make sure your /etc/resolv.conf file points to name servers that really do exist.

    -Also, if you do not have DNS server access for name resolution please check +Also, if you do not have DNS server access for name resolution, please check that the settings for your smb.conf file results in dns proxy = no. The -best way to check this is with testparm smb.conf. -

    +best way to check this is with testparm smb.conf. +

    + It is helpful to monitor the log files during testing by using the -tail -F log_file_name in a separate +tail -F log_file_name in a separate terminal console (use ctrl-alt-F1 through F6 or multiple terminals in X). Relevant log files can be found (for default installations) in -/usr/local/samba/var. Also, connection logs from -machines can be found here or possibly in /var/log/samba +/usr/local/samba/var. Also, connection logs from +machines can be found here or possibly in /var/log/samba, depending on how or if you specified logging in your smb.conf file.

    If you make changes to your smb.conf file while going through these test, -don't forget to restart smbd and nmbd. -

    The tests

    Procedure 33.1. Diagnosing your samba server

    1. +remember to restart smbd and nmbd. +

    The Tests

    Procedure 33.1. Diagnosing your Samba server

    1. + In the directory in which you store your smb.conf file, run the command -testparm smb.conf. If it reports any errors then your smb.conf +testparm smb.conf. If it reports any errors, then your smb.conf configuration file is faulty.

      Note

      Your smb.conf file may be located in: /etc/samba -Or in: /usr/local/samba/lib +or in /usr/local/samba/lib.

    2. -Run the command ping BIGSERVER from the PC and -ping ACLIENT from -the unix box. If you don't get a valid response then your TCP/IP -software is not correctly installed. +Run the command ping BIGSERVER from the PC and +ping ACLIENT from the UNIX box. If you do not get a valid response, +then your TCP/IP software is not correctly installed.

      -Note that you will need to start a "dos prompt" window on the PC to -run ping. +You will need to start a “dos prompt” window on the PC to run ping.

      -If you get a message saying host not found or similar then your DNS +If you get a message saying “host not found” or similar, then your DNS software or /etc/hosts file is not correctly setup. -It is possible to -run samba without DNS entries for the server and client, but I assume +It is possible to run Samba without DNS entries for the server and client, but it is assumed you do have correct entries for the remainder of these tests.

      Another reason why ping might fail is if your host is running firewall software. You will need to relax the rules to let in the workstation in question, perhaps by allowing access from another subnet (on Linux -this is done via the ipfwadm program.) +this is done via the appropriate firewall maintenance commands ipchains +or iptables).

      Note

      Modern Linux distributions install ipchains/iptables by default. This is a common problem that is often overlooked. -

    3. -Run the command smbclient -L BIGSERVER on the unix box. You -should get a list of available shares back. -

      -If you get a error message containing the string "Bad password" then -you probably have either an incorrect hosts allow, -hosts deny or valid users line in your -smb.conf, or your guest account is not -valid. Check what your guest account is using testparm and -temporarily remove any hosts allow, hosts deny, valid users or invalid users lines. -

      -If you get a connection refused response then the smbd server may -not be running. If you installed it in inetd.conf then you probably edited -that file incorrectly. If you installed it as a daemon then check that +

    +If you wish to check what firewall rules may be present in a system under test, simply run +iptables -L -v or if ipchains-based firewall rules are in use, +ipchains -L -v. +

    +Here is a sample listing from a system that has an external ethernet interface (eth1) on which Samba +is not active, and an internal (private network) interface (eth0) on which Samba is active: +

    +frodo:~ # iptables -L -v
    +Chain INPUT (policy DROP 98496 packets, 12M bytes)
    + pkts bytes target     prot opt in     out     source     destination
    + 187K  109M ACCEPT     all  --  lo     any     anywhere   anywhere
    + 892K  125M ACCEPT     all  --  eth0   any     anywhere   anywhere
    +1399K 1380M ACCEPT     all  --  eth1   any     anywhere   anywhere  \
    +					state RELATED,ESTABLISHED
    +
    +Chain FORWARD (policy DROP 0 packets, 0 bytes)
    + pkts bytes target     prot opt in     out     source     destination
    + 978K 1177M ACCEPT     all  --  eth1   eth0    anywhere   anywhere \
    +					state RELATED,ESTABLISHED
    + 658K   40M ACCEPT     all  --  eth0   eth1    anywhere   anywhere
    +    0     0 LOG        all  --  any    any     anywhere   anywhere \
    +					LOG level warning
    +
    +Chain OUTPUT (policy ACCEPT 2875K packets, 1508M bytes)
    + pkts bytes target     prot opt in     out     source     destination
    +
    +Chain reject_func (0 references)
    + pkts bytes target     prot opt in     out     source     destinat
    +

    +

  • +Run the command: smbclient -L BIGSERVER +on the UNIX box. You should get back a list of available shares. +

    +If you get an error message containing the string “Bad password”, then +you probably have either an incorrect hosts allow, +hosts deny or valid users line in your +smb.conf, or your guest account is not valid. Check what your guest account is using testparm and +temporarily remove any hosts allow, hosts deny, +valid users or invalid users lines. +

    +If you get a message “connection refused” response, then the smbd server may +not be running. If you installed it in inetd.conf, then you probably edited +that file incorrectly. If you installed it as a daemon, then check that it is running, and check that the netbios-ssn port is in a LISTEN -state using netstat -a. +state using netstat -a.

    Note

    - - -Some Unix / Linux systems use xinetd in place of + + +Some UNIX/Linux systems use xinetd in place of inetd. Check your system documentation for the location -of the control file/s for your particular system implementation of -this network super daemon. +of the control files for your particular system implementation of +the network super daemon.

    -If you get a session request failed then the server refused the -connection. If it says "Your server software is being unfriendly" then -its probably because you have invalid command line parameters to smbd, +If you get a message saying “session request failed”, the server refused the +connection. If it says “Your server software is being unfriendly”, then +it's probably because you have invalid command line parameters to smbd, or a similar fatal problem with the initial startup of smbd. Also check your config file (smb.conf) for syntax errors with testparm -and that the various directories where samba keeps its log and lock +and that the various directories where Samba keeps its log and lock files exist.

    There are a number of reasons for which smbd may refuse or decline a session request. The most common of these involve one or more of -the following smb.conf file entries: -

    hosts deny = ALL
    hosts allow = xxx.xxx.xxx.xxx/yy
    bind interfaces only = Yes

    +the smb.conf file entries as shown in . +

    +

    Example 33.2. Configuration for only allowing connections from a certain subnet

    [globals]
    ...
    hosts deny = ALL
    hosts allow = xxx.xxx.xxx.xxx/yy
    interfaces = eth0
    bind interfaces only = Yes
    ...

    +

    In the above, no allowance has been made for any session requests that will automatically translate to the loopback adapter address 127.0.0.1. -To solve this problem change these lines to: -

    hosts deny = ALL
    hosts allow = xxx.xxx.xxx.xxx/yy 127.

    -Do not use the bind interfaces only parameter where you -may wish to -use the samba password change facility, or where smbclient may need to -access a local service for name resolution or for local resource -connections. (Note: the bind interfaces only parameter deficiency -where it will not allow connections to the loopback address will be -fixed soon). -

    - +To solve this problem, change these lines as shown in . +

    +

    Example 33.3. Configuration for allowing connections from a certain subnet and localhost

    [globals]
    ...
    hosts deny = ALL
    hosts allow = xxx.xxx.xxx.xxx/yy 127.
    interfaces = eth0 lo
    ...

    +

    + Another common cause of these two errors is having something already running -on port 139, such as Samba -(ie: smbd is running from inetd already) or + +on port 139, such as Samba (smbd is running from inetd already) or something like Digital's Pathworks. Check your inetd.conf file before trying -to start smbd as a daemon, it can avoid a lot of frustration! +to start smbd as a daemon it can avoid a lot of frustration!

    And yet another possible cause for failure of this test is when the subnet mask -and / or broadcast address settings are incorrect. Please check that the -network interface IP Address / Broadcast Address / Subnet Mask settings are +and/or broadcast address settings are incorrect. Please check that the +network interface IP Address/Broadcast Address/Subnet Mask settings are correct and that Samba has correctly noted these in the log.nmbd file.

  • -Run the command nmblookup -B BIGSERVER __SAMBA__. You should get the -IP address of your Samba server back. +Run the command: nmblookup -B BIGSERVER __SAMBA__. +You should get back the IP address of your Samba server.

    -If you don't then nmbd is incorrectly installed. Check your inetd.conf -if you run it from there, or that the daemon is running and listening -to udp port 137. +If you do not, then nmbd is incorrectly installed. Check your inetd.conf +if you run it from there, or that the daemon is running and listening to udp port 137.

    One common problem is that many inetd implementations can't take many -parameters on the command line. If this is the case then create a +parameters on the command line. If this is the case, then create a one-line script that contains the right parameters and run that from inetd. -

  • run the command nmblookup -B ACLIENT '*'

    -You should get the PCs IP address back. If you don't then the client +

  • +Run the command: nmblookup -B ACLIENT `*' +

    +You should get the PC's IP address back. If you do not then the client software on the PC isn't installed correctly, or isn't started, or you got the name of the PC wrong.

    -If ACLIENT doesn't resolve via DNS then use the IP address of the +If ACLIENT does not resolve via DNS then use the IP address of the client in the above test.

  • -Run the command nmblookup -d 2 '*' +Run the command: nmblookup -d 2 '*'

    This time we are trying the same as the previous test but are trying it via a broadcast to the default broadcast address. A number of -NetBIOS / TCP/IP hosts on the network should respond, although Samba may +NetBIOS/TCP/IP hosts on the network should respond, although Samba may not catch all of the responses in the short time it listens. You -should see got a positive name query response +should see the “got a positive name query response” messages from several hosts.

    -If this doesn't give a similar result to the previous test then +If this does not give a similar result to the previous test, then nmblookup isn't correctly getting your broadcast address through its automatic mechanism. In this case you should experiment with the -interfaces option in smb.conf to manually configure your IP +interfaces option in smb.conf to manually configure your IP address, broadcast and netmask.

    -If your PC and server aren't on the same subnet then you will need to -use the -B option to set the broadcast address to that of the PCs -subnet. +If your PC and server aren't on the same subnet, then you will need to use the +-B option to set the broadcast address to that of the PCs subnet.

    This test will probably fail if your subnet mask and broadcast address are not correct. (Refer to TEST 3 notes above). -

  • -Run the command smbclient //BIGSERVER/TMP. You should +

  • + +Run the command: smbclient //BIGSERVER/TMP. You should then be prompted for a password. You should use the password of the account -you are logged into the unix box with. If you want to test with -another account then add the -U accountname option to the end of -the command line. eg: -smbclient //bigserver/tmp -Ujohndoe +with which you are logged into the UNIX box. If you want to test with +another account, then add the -U accountname option to the end of +the command line. For example, smbclient //bigserver/tmp -Ujohndoe.

    Note

    -It is possible to specify the password along with the username -as follows: -smbclient //bigserver/tmp -Ujohndoe%secret +It is possible to specify the password along with the username as follows: +smbclient //bigserver/tmp -Ujohndoe%secret.

    -Once you enter the password you should get the smb> prompt. If you -don't then look at the error message. If it says invalid network -name then the service "tmp" is not correctly setup in your smb.conf. +Once you enter the password, you should get the smb> prompt. If you +do not, then look at the error message. If it says “invalid network +name”, then the service tmp is not correctly setup in your smb.conf.

    -If it says bad password then the likely causes are: +If it says “bad password”, then the likely causes are:

    1. - you have shadow passwords (or some other password system) but didn't - compile in support for them in smbd + You have shadow passwords (or some other password system) but didn't + compile in support for them in smbd.

    2. - your valid users configuration is incorrect + Your valid users configuration is incorrect.

    3. - you have a mixed case password and you haven't enabled the password level option at a high enough level + You have a mixed case password and you haven't enabled the password level option at a high enough level.

    4. - the path line in smb.conf is incorrect. Check it with testparm + The path line in smb.conf is incorrect. Check it with testparm.

    5. - you enabled password encryption but didn't map unix to samba users. Run

      smbpasswd -a username

      . + You enabled password encryption but didn't map UNIX to Samba users. Run: + smbpasswd -a username

    -Once connected you should be able to use the commands -dir get put etc. -Type help command for instructions. You should -especially check that the amount of free disk space shown is correct -when you type dir. +Once connected, you should be able to use the commands dir, get, +put and so on. Type help command for instructions. You should +especially check that the amount of free disk space shown is correct when you type dir.

  • -On the PC, type the command net view \\BIGSERVER. You will -need to do this from within a "dos prompt" window. You should get back a -list of available shares on the server. -

    -If you get a network name not found or similar error then netbios -name resolution is not working. This is usually caused by a problem in -nmbd. To overcome it you could do one of the following (you only need -to choose one of them): +On the PC, type the command net view \\BIGSERVER. You will +need to do this from within a dos prompt window. You should get back a +list of shares available on the server. +

    +If you get a message “network name not found” or similar error, then netbios +name resolution is not working. This is usually caused by a problem in nmbd. +To overcome it, you could do one of the following (you only need to choose one of them):

    1. - fixup the nmbd installation + Fixup the nmbd installation.

    2. - add the IP address of BIGSERVER to the wins server box in the + Add the IP address of BIGSERVER to the wins server box in the advanced TCP/IP setup on the PC.

    3. - enable windows name resolution via DNS in the advanced section of - the TCP/IP setup + Enable Windows name resolution via DNS in the advanced section of the TCP/IP setup.

    4. - add BIGSERVER to your lmhosts file on the PC. + Add BIGSERVER to your lmhosts file on the PC.

    -If you get a invalid network name or bad password error then the -same fixes apply as they did for the smbclient -L test above. In -particular, make sure your hosts allow line is correct (see the man -pages) +If you get a message “invalid network name” or +“bad password error”, then apply the +same fixes as for the smbclient -L test above. In +particular, make sure your hosts allow line is correct (see the man pages).

    Also, do not overlook that fact that when the workstation requests the -connection to the samba server it will attempt to connect using the +connection to the Samba server, it will attempt to connect using the name with which you logged onto your Windows machine. You need to make sure that an account exists on your Samba server with that exact same name and password.

    -If you get specified computer is not receiving requests or similar -it probably means that the host is not contactable via tcp services. -Check to see if the host is running tcp wrappers, and if so add an entry in -the hosts.allow file for your client (or subnet, etc.) +If you get a message “specified computer is not receiving requests” or similar, +it probably means that the host is not contactable via TCP services. +Check to see if the host is running TCP wrappers, and if so add an entry in +the hosts.allow file for your client (or subnet, and so on.)

  • -Run the command net use x: \\BIGSERVER\TMP. You should -be prompted for a password then you should get a command completed -successfully message. If not then your PC software is incorrectly -installed or your smb.conf is incorrect. make sure your hosts allow +Run the command net use x: \\BIGSERVER\TMP. You should +be prompted for a password, then you should get a command completed +successfully message. If not, then your PC software is incorrectly +installed or your smb.conf is incorrect. Make sure your hosts allow and other config lines in smb.conf are correct.

    -It's also possible that the server can't work out what user name to -connect you as. To see if this is the problem add the line user = username to the [tmp] section of -smb.conf where username is the +It's also possible that the server can't work out what user name to connect you as. +To see if this is the problem, add the line +user = username to the +[tmp] section of +smb.conf where username is the username corresponding to the password you typed. If you find this -fixes things you may need the username mapping option. +fixes things, you may need the username mapping option.

    It might also be the case that your client only sends encrypted passwords -and you have encrypt passwords = no in smb.conf -Turn it back on to fix. +and you have encrypt passwords = no in smb.conf. +Change this to "yes" to fix this.

  • -Run the command nmblookup -M testgroup where -testgroup is the name of the workgroup that your Samba server and +Run the command nmblookup -M testgroup where +testgroup is the name of the workgroup that your Samba server and Windows PCs belong to. You should get back the IP address of the master browser for that workgroup.

    -If you don't then the election process has failed. Wait a minute to -see if it is just being slow then try again. If it still fails after -that then look at the browsing options you have set in smb.conf. Make -sure you have preferred master = yes to ensure that +If you do not, then the election process has failed. Wait a minute to +see if it is just being slow, then try again. If it still fails after +that, then look at the browsing options you have set in smb.conf. Make +sure you have preferred master = yes to ensure that an election is held at startup.

  • -From file manager try to browse the server. Your samba server should +>From file manager, try to browse the server. Your Samba server should appear in the browse list of your local workgroup (or the one you specified in smb.conf). You should be able to double click on the name -of the server and get a list of shares. If you get a "invalid -password" error when you do then you are probably running WinNT and it +of the server and get a list of shares. If you get the error message “invalid password”, + you are probably running Windows NT and it is refusing to browse a server that has no encrypted password -capability and is in user level security mode. In this case either set -security = server AND -password server = Windows_NT_Machine in your -smb.conf file, or make sure encrypt passwords is -set to "yes". -

  • +capability and is in User Level Security mode. In this case, either set +security = server and +password server = Windows_NT_Machine in your +smb.conf file, or make sure encrypt passwords is +set to “yes”. +

    diff --git a/docs/htmldocs/domain-member.html b/docs/htmldocs/domain-member.html index 313c6e0fc7..2d73b7c616 100644 --- a/docs/htmldocs/domain-member.html +++ b/docs/htmldocs/domain-member.html @@ -1,140 +1,142 @@ -Chapter 7. Domain Membership

    Chapter 7. Domain Membership

    John H. Terpstra

    Samba Team

    Jeremy Allison

    Samba Team

    Gerald (Jerry) Carter

    Samba Team

    Andrew Tridgell

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    -Domain Membership is a subject of vital concern, Samba must be able to -participate as a member server in a Microsoft Domain security context, and +Chapter 7. Domain Membership

    Chapter 7. Domain Membership

    John H. Terpstra

    Samba Team

    Jeremy Allison

    Samba Team

    Gerald (Jerry) Carter

    Samba Team

    Andrew Tridgell

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    Guenther Deschner

    LDAP updates

    +Domain Membership is a subject of vital concern. Samba must be able to +participate as a member server in a Microsoft Domain Security context, and Samba must be capable of providing Domain machine member trust accounts, -otherwise it would not be capable of offering a viable option for many users. +otherwise it would not be able to offer a viable option for many users.

    -This chapter covers background information pertaining to domain membership, -Samba configuration for it, and MS Windows client procedures for joining a -domain. Why is this necessary? Because both are areas in which there exists +This chapter covers background information pertaining to Domain Membership, +the Samba configuration for it, and MS Windows client procedures for joining a +domain. Why is this necessary? Because both are areas in which there exists within the current MS Windows networking world and particularly in the UNIX/Linux networking and administration world, a considerable level of -mis-information, incorrect understanding, and a lack of knowledge. Hopefully +misinformation, incorrect understanding and a lack of knowledge. Hopefully this chapter will fill the voids. -

    Features and Benefits

    -MS Windows workstations and servers that want to participate in domain security need to -be made Domain members. Participating in Domain security is often called +

    Features and Benefits

    +MS Windows workstations and servers that want to participate in Domain Security need to +be made Domain Members. Participating in Domain Security is often called Single Sign On or SSO for short. This chapter describes the process that must be followed to make a workstation -(or another server - be it an MS Windows NT4 / 200x -server) or a Samba server a member of an MS Windows Domain security context. +(or another server be it an MS Windows NT4 / 200x +server) or a Samba server a member of an MS Windows Domain Security context.

    -Samba-3 can join an MS Windows NT4 style domain as a native member server, an + +Samba-3 can join an MS Windows NT4-style domain as a native member server, an MS Windows Active Directory Domain as a native member server, or a Samba Domain -Control network. -

    -Domain membership has many advantages: +Control network. Domain Membership has many advantages:

    • - MS Windows workstation users get the benefit of SSO + + MS Windows workstation users get the benefit of SSO.

    • - Domain user access rights and file ownership / access controls can be set - from the single Domain SAM (Security Account Manager) database - (works with Domain member servers as well as with MS Windows workstations - that are domain members) + Domain user access rights and file ownership/access controls can be set + from the single Domain Security Account Manager (SAM) database + (works with Domain Member servers as well as with MS Windows workstations + that are Domain Members).

    • - Only MS Windows NT4 / 200x / XP Professional - workstations that are Domain members - can use network logon facilities + Only MS Windows NT4/200x/XP Professional + workstations that are Domain Members can use network logon facilities.

    • Domain Member workstations can be better controlled through the use of Policy files (NTConfig.POL) and Desktop Profiles.

    • Through the use of logon scripts, users can be given transparent access to network - applications that run off application servers + applications that run off application servers.

    • Network administrators gain better application and user access management abilities because there is no need to maintain user accounts on any network client or server, other than the central Domain database - (either NT4/Samba SAM style Domain, NT4 Domain that is back ended with an - LDAP directory, or via an Active Directory infrastructure) -

    MS Windows Workstation/Server Machine Trust Accounts

    -A machine trust account is an account that is used to authenticate a client -machine -(rather than a user) to the Domain Controller server. In Windows terminology, -this is known as a "Computer Account." -

    -The password of a machine trust account acts as the shared secret for -secure communication with the Domain Controller. This is a security + (either NT4/Samba SAM style Domain, NT4 Domain that is backended with an + LDAP directory, or via an Active Directory infrastructure). +

    MS Windows Workstation/Server Machine Trust Accounts

    + +A Machine Trust Account is an account that is used to authenticate a client +machine (rather than a user) to the Domain Controller server. In Windows terminology, +this is known as a “Computer Account.” The purpose of the machine account +is to prevent a rogue user and Domain Controller from colluding to gain access to a +domain member workstation. +

    +The password of a Machine Trust Account acts as the shared secret for +secure communication with the Domain Controller. This is a security feature to prevent an unauthorized machine with the same NetBIOS name from joining the domain and gaining access to domain user/group -accounts. Windows NT, 200x, XP Professional clients use machine trust -accounts, but Windows 9x / Me / XP Home clients do not. Hence, a -Windows 9x / Me / XP Home client is never a true member of a domain -because it does not possess a machine trust account, and thus has no -shared secret with the domain controller. +accounts. Windows NT/200x/XP Professional clients use machine trust +accounts, but Windows 9x/Me/XP Home clients do not. Hence, a +Windows 9x/Me/XP Home client is never a true member of a Domain +because it does not possess a Machine Trust Account, and, thus, has no +shared secret with the Domain Controller.

    -A Windows NT4 PDC stores each machine trust account in the Windows Registry. +A Windows NT4 PDC stores each Machine Trust Account in the Windows Registry. The introduction of MS Windows 2000 saw the introduction of Active Directory, -the new repository for machine trust accounts. -

    -A Samba PDC, however, stores each machine trust account in two parts, +the new repository for Machine Trust Accounts. A Samba PDC, however, stores +each Machine Trust Account in two parts, as follows:

    • A Domain Security Account (stored in the - passdb backend that has been configured in the + passdb backend that has been configured in the smb.conf file. The precise nature of the account information that is stored depends on the type of backend database that has been chosen.

      The older format of this data is the smbpasswd database - which contains the UNIX login ID, the UNIX user identifier (UID), and the + that contains the UNIX login ID, the UNIX user identifier (UID), and the LanMan and NT encrypted passwords. There is also some other information in this file that we do not need to concern ourselves with here.

      - The two newer database types are called ldapsam, - tdbsam. Both store considerably more data than the + The two newer database types are called ldapsam, and + tdbsam. Both store considerably more data than the older smbpasswd file did. The extra information - enables new user account controls to be used. + enables new user account controls to be implemented.

    • A corresponding UNIX account, typically stored in - /etc/passwd. Work is in progress to allow a + /etc/passwd. Work is in progress to allow a simplified mode of operation that does not require UNIX user accounts, but this may not be a feature of the early releases of Samba-3.

    -

    -There are three ways to create machine trust accounts: +

    + +There are three ways to create Machine Trust Accounts:

    • Manual creation from the UNIX/Linux command line. Here, both the Samba and corresponding UNIX account are created by hand.

    • - - Using the MS Windows NT4 Server Manager (either from an NT4 Domain member - server, or using the Nexus toolkit available from the Microsoft web site. - This tool can be run from any MS Windows machine so long as the user is + + Using the MS Windows NT4 Server Manager, either from an NT4 Domain Member + server, or using the Nexus toolkit available from the Microsoft Web site. + This tool can be run from any MS Windows machine as long as the user is logged on as the administrator account.

    • - "On-the-fly" creation. The Samba machine trust account is automatically + “On-the-fly” creation. The Samba Machine Trust Account is automatically created by Samba at the time the client is joined to the domain. (For security, this is the recommended method.) The corresponding UNIX account may be created automatically or manually. -

    Manual Creation of Machine Trust Accounts

    -The first step in manually creating a machine trust account is to manually +

    Manual Creation of Machine Trust Accounts

    +The first step in manually creating a Machine Trust Account is to manually create the corresponding UNIX account in /etc/passwd. -This can be done using vipw or another 'add user' command -that is normally used to create new UNIX accounts. The following is an example for a Linux based Samba server: - - - - +This can be done using vipw or another “add user” command +that is normally used to create new UNIX accounts. The following is an example for +a Linux-based Samba server:

    + +

    -root# /usr/sbin/useradd -g 100 -d /dev/null -c "machine nickname" \
    +root# /usr/sbin/useradd -g machines -d /dev/null -c "machine nickname" \
        -s /bin/false machine_name$ 
     
     root# passwd -l machine_name$
     

    -

    - +

    In the above example above there is an existing system group “machines” which is used +as the primary group for all machine accounts. In the following examples the “machines” group has +numeric GID equal 100.

    + On *BSD systems, this can be done using the chpass utility:

     root# chpass -a \
    -  "machine_name$:*:101:100::0:0:Workstation machine_name:/dev/null:/sbin/nologin"
    +'machine_name$:*:101:100::0:0:Windows machine_name:/dev/null:/sbin/nologin'
     

    The /etc/passwd entry will list the machine name -with a "$" appended, won't have a password, will have a null shell and no -home directory. For example a machine named 'doppy' would have an +with a “$” appended, will not have a password, will have a null shell and no +home directory. For example, a machine named “doppy” would have an /etc/passwd entry like this:

     doppy$:x:505:100:machine_nickname:/dev/null:/bin/false
    @@ -142,13 +144,13 @@ doppy$:x:505:100:machine_nickname:/dev/null:
     Above, machine_nickname can be any
     descriptive name for the client, i.e., BasementComputer.
     machine_name absolutely must be the NetBIOS
    -name of the client to be joined to the domain.  The "$" must be
    +name of the client to be joined to the domain. The “$” must be
     appended to the NetBIOS name of the client or Samba will not recognize
    -this as a machine trust account.
    +this as a Machine Trust Account.
     

    Now that the corresponding UNIX account has been created, the next step is to create the Samba account for the client containing the well-known initial -machine trust account password. This can be done using the +Machine Trust Account password. This can be done using the smbpasswd command as shown here:

    @@ -157,267 +159,282 @@ as shown here:

    where machine_name is the machine's NetBIOS -name. The RID of the new machine account is generated from the UID of +name. The RID of the new machine account is generated from the UID of the corresponding UNIX account.

    Join the client to the domain immediately

    - Manually creating a machine trust account using this method is the - equivalent of creating a machine trust account on a Windows NT PDC using - - the Server Manager. From the time at which the - account is created to the time which the client joins the domain and - changes the password, your domain is vulnerable to an intruder joining - your domain using a machine with the same NetBIOS name. A PDC inherently - trusts members of the domain and will serve out a large degree of user - information to such clients. You have been warned! -

    Using NT4 Server Manager to Add Machine Accounts to the Domain

    +Manually creating a Machine Trust Account using this method is the +equivalent of creating a Machine Trust Account on a Windows NT PDC using + +the Server Manager. From the time at which the +account is created to the time the client joins the domain and +changes the password, your domain is vulnerable to an intruder joining +your domain using a machine with the same NetBIOS name. A PDC inherently +trusts members of the domain and will serve out a large degree of user +information to such clients. You have been warned! +

    Managing Domain Machine Accounts using NT4 Server Manager

    +A working add machine script script is essential +for machine trust accounts to be automatically created. This applies no matter whether +one uses automatic account creation, or if one wishes to use the NT4 Domain Server Manager. +

    + If the machine from which you are trying to manage the domain is an -MS Windows NT4 workstation or MS Windows 200x / XP Professional -then the tool of choice is the package called SRVTOOLS.EXE. -When executed in the target directory this will unpack SrvMge.exe +MS Windows NT4 workstation or MS Windows 200x/XP Professional, +the tool of choice is the package called SRVTOOLS.EXE. +When executed in the target directory it will unpack SrvMgr.exe and UsrMgr.exe (both are domain management tools for MS Windows NT4 workstation).

    + If your workstation is a Microsoft Windows 9x/Me family product you should download the Nexus.exe package from the Microsoft web site. When executed from the target directory this will unpack the same tools but for use on this platform.

    Further information about these tools may be obtained from the following locations: -http://support.microsoft.com/default.aspx?scid=kb;en-us;173673 -http://support.microsoft.com/default.aspx?scid=kb;en-us;172540 +

    +

    http://support.microsoft.com/default.aspx?scid=kb;en-us;173673
    http://support.microsoft.com/default.aspx?scid=kb;en-us;172540

    Launch the srvmgr.exe (Server Manager for Domains) and follow these steps:

    Procedure 7.1. Server Manager Account Machine Account Management

    1. - From the menu select Computer + From the menu select Computer.

    2. - Click on Select Domain + Click Select Domain.

    3. - Click on the name of the domain you wish to administer in the + Click the name of the domain you wish to administer in the Select Domain panel and then click OK.

    4. - Again from the menu select Computer + Again from the menu select Computer.

    5. - Select Add to Domain + Select Add to Domain.

    6. - In the dialog box, click on the radio button to + In the dialog box, click the radio button to Add NT Workstation of Server, then - enter the machine name in the field provided, then click the + enter the machine name in the field provided, and click the Add button. -

    "On-the-Fly" Creation of Machine Trust Accounts

    -The second (and recommended) way of creating machine trust accounts is +

    On-the-Fly Creation of Machine Trust Accounts

    +The second (and recommended) way of creating Machine Trust Accounts is simply to allow the Samba server to create them as needed when the client is joined to the domain. -

    Since each Samba machine trust account requires a corresponding UNIX account, a method +

    Since each Samba Machine Trust Account requires a corresponding UNIX account, a method for automatically creating the UNIX account is usually supplied; this requires configuration of the -add machine script option in -smb.conf. This method is not required, however; corresponding UNIX +add machine script option in smb.conf. This method is not required, however, corresponding UNIX accounts may also be created manually.

    -Below is an example for a RedHat Linux system. -

    [global]
    # <...remainder of parameters...>
    add machine script = /usr/sbin/useradd -d /dev/null -g 100 -s /bin/false -M %u

    Making an MS Windows Workstation or Server a Domain Member

    -The procedure for making an MS Windows workstation of server a member of the domain varies -with the version of Windows: -

    Windows 200x XP Professional

    - When the user elects to make the client a domain member, Windows 200x prompts for +Here is an example for a Red Hat Linux system. +

    [global]
    # <...remainder of parameters...>
    add machine script = /usr/sbin/useradd -d /dev/null -g 100 \
    -s /bin/false -M %u

    Making an MS Windows Workstation or Server a Domain Member

    +The procedure for making an MS Windows workstation or server a member of the domain varies +with the version of Windows. +

    Windows 200x/XP Professional Client

    + When the user elects to make the client a Domain Member, Windows 200x prompts for an account and password that has privileges to create machine accounts in the domain. - A Samba administrative account (i.e., a Samba account that has root privileges on the + A Samba Administrator Account (i.e., a Samba account that has root privileges on the Samba server) must be entered here; the operation will fail if an ordinary user account is given.

    - Note: For security reasons the password for this administrative account should be set - to a password that is other than that used for the root user in the - /etc/passwd. + For security reasons, the password for this Administrator Account should be set + to a password that is other than that used for the root user in /etc/passwd.

    - The name of the account that is used to create domain member machine accounts can be - anything the network administrator may choose. If it is other than root - then this is easily mapped to root using the file pointed to be the smb.conf parameter - username map = /etc/samba/smbusers. + The name of the account that is used to create Domain Member machine accounts can be + anything the network administrator may choose. If it is other than root + then this is easily mapped to root in the file named in the smb.conf parameter + username map = /etc/samba/smbusers.

    - The session key of the Samba administrative account acts as an - encryption key for setting the password of the machine trust - account. The machine trust account will be created on-the-fly, or - updated if it already exists. -

    Windows NT4

    - If the machine trust account was created manually, on the + The session key of the Samba Administrator Account acts as an encryption key for setting the password of the machine trust + account. The Machine Trust Account will be created on-the-fly, or updated if it already exists. +

    Windows NT4 Client

    + If the Machine Trust Account was created manually, on the Identification Changes menu enter the domain name, but do not check the box Create a Computer Account in the Domain. - In this case, the existing machine trust account is used to join the machine + In this case, the existing Machine Trust Account is used to join the machine to the domain.

    - If the machine trust account is to be created - on-the-fly, on the Identification Changes menu enter the domain - name, and check the box Create a Computer Account in the - Domain. In this case, joining the domain proceeds as above - for Windows 2000 (i.e., you must supply a Samba administrative account when + If the Machine Trust Account is to be created on-the-fly, on the Identification Changes menu enter the domain + name and check the box Create a Computer Account in the Domain. In this case, joining + the domain proceeds as above for Windows 2000 (i.e., you must supply a Samba Administrator Account when prompted). -

    Samba

    Joining a Samba client to a domain is documented in - the domain member chapter. +

    Samba Client

    Joining a Samba client to a domain is documented in + .

    Domain Member Server

    This mode of server operation involves the Samba machine being made a member of a domain security context. This means by definition that all user authentication will be done from a centrally defined authentication regime. -The authentication regime may come from an NT3/4 style (old domain technology) +The authentication regime may come from an NT3/4-style (old domain technology) server, or it may be provided from an Active Directory server (ADS) running on MS Windows 2000 or later.

    -Of course it should be clear that the authentication back end itself could be +Of course it should be clear that the authentication backend itself could be from any distributed directory architecture server that is supported by Samba. -This can be LDAP (from OpenLDAP), or Sun's iPlanet, of NetWare Directory -Server, etc. +This can be LDAP (from OpenLDAP), or Sun's iPlanet, or NetWare Directory +Server, and so on. -

    -Please refer to the chapter on setting up a PDC -for more information regarding how to create a domain -machine account for a domain member server as well as for information -regarding how to enable the Samba domain member machine to join the domain and -to be fully trusted by it. -

    Joining an NT4 type Domain with Samba-3

    -

    Table 7.1. Assumptions

    NetBIOS name:SERV1
    Win2K/NT domain name:MIDEARTH
    Domain's PDC NetBIOS name:DOMPDC
    Domain's BDC NetBIOS names:DOMBDC1 and DOMBDC2

    -

    -First, you must edit your smb.conf file to tell Samba it should -now use domain security. +

    Note

    +When Samba is configured to use an LDAP, or other identity management and/or +directory service, it is Samba that continues to perform user and machine +authentication. It should be noted that the LDAP server does not perform +authentication handling in place of what Samba is designed to do. +

    +Please refer to , for more information regarding +how to create a domain machine account for a Domain Member server as well as for +information on how to enable the Samba Domain Member machine to join the domain +and be fully trusted by it. +

    Joining an NT4-type Domain with Samba-3

    lists names that have been used in the remainder of this chapter.

    Table 7.1. Assumptions

    NetBIOS name:SERV1
    Windows 200x/NT domain name:MIDEARTH
    Domain's PDC NetBIOS name:DOMPDC
    Domain's BDC NetBIOS names:DOMBDC1 and DOMBDC2

    +First, you must edit your smb.conf file to tell Samba it should now use domain security.

    Change (or add) your - security line in the [global] section + security line in the [global] section of your smb.conf to read:

    security = domain

    -Next change the workgroup line in the [global] +Next change the workgroup line in the [global] section to read:

    workgroup = MIDEARTH

    -as this is the name of the domain we are joining. +This is the name of the domain we are joining.

    -You must also have the parameter -encrypt passwords set to yes - in order for your users to authenticate to the NT PDC. +You must also have the parameter encrypt passwords +set to yes in order for your users to authenticate to the NT PDC. +This is the defaulty setting if this parameter is not specified. There is no need to specify this +parameter, but if it is specified in the smb.conf file, it must be set to Yes.

    -Finally, add (or modify) a password server line in the [global] +Finally, add (or modify) a password server line in the [global] section to read:

    password server = DOMPDC DOMBDC1 DOMBDC2

    -These are the primary and backup domain controllers Samba +These are the primary and backup Domain Controllers Samba will attempt to contact in order to authenticate users. Samba will try to contact each of these servers in order, so you may want to rearrange this list in order to spread out the authentication load -among domain controllers. +among Domain Controllers.

    -Alternatively, if you want smbd to automatically determine -the list of Domain controllers to use for authentication, you may +Alternately, if you want smbd to automatically determine +the list of Domain Controllers to use for authentication, you may set this line to be:

    password server = *

    -This method allows Samba to use exactly the same mechanism that NT does. This -method either broadcasts or uses a WINS database in order to -find domain controllers to authenticate against. +This method allows Samba to use exactly the same mechanism that NT does. The +method either uses broadcast-based name resolution, performs a WINS database +lookup in order to find a Domain Controller against which to authenticate, +or locates the Domain Controller using DNS name resolution.

    -In order to actually join the domain, you must run this command: +To join the domain, run this command:

    -root# net rpc join -S DOMPDC -UAdministrator%password
    +root# net join -S DOMPDC -UAdministrator%password
     

    -If the -S DOMPDC argument is not given then -the domain name will be obtained from smb.conf. -

    -As we are joining the domain DOM and the PDC for that domain -(the only machine that has write access to the domain SAM database) -is DOMPDC, we use it for the -S option. -The Administrator%password is -the login name and password for an account which has the necessary -privilege to add machines to the domain. If this is successful -you will see the message: +If the -S DOMPDC argument is not given, the domain name will be obtained from smb.conf.

    +The machine is joining the domain DOM, and the PDC for that domain (the only machine +that has write access to the domain SAM database) is DOMPDC, therefore use the -S +option. The Administrator%password is the login name and +password for an account that has the necessary privilege to add machines to the +domain. If this is successful, you will see the message in your terminal window the +text shown below. Where the older NT4 style domain architecture is used: +

     Joined domain DOM.
    -or Joined 'SERV1' to realm 'MYREALM'
    +

    +

    +Where Active Directory is used: +

    +Joined SERV1 to realm MYREALM.
    +

    -in your terminal window. See the -net man page for more details. +Refer to the net man page for further information.

    This process joins the server to the domain without having to create the machine trust account on the PDC beforehand.

    -This command goes through the machine account password -change protocol, then writes the new (random) machine account -password for this Samba server into a file in the same directory -in which an smbpasswd file would be stored - normally: -

    +This command goes through the machine account password change protocol, then writes +the new (random) machine account password for this Samba server into a file in the +same directory in which a smbpasswd file would be normally stored: +

     /usr/local/samba/private/secrets.tdb
    +or 
    +/etc/samba/secrets.tdb.
    +

    -This file is created and owned by root and is not -readable by any other user. It is the key to the domain-level -security for your system, and should be treated as carefully +This file is created and owned by root and is not readable by any other user. It is +the key to the Domain-level security for your system, and should be treated as carefully as a shadow password file.

    -Finally, restart your Samba daemons and get ready for -clients to begin using domain security! The way you can restart your -samba daemons depends on your distribution, but in most cases running +Finally, restart your Samba daemons and get ready for clients to begin using domain +security. The way you can restart your Samba daemons depends on your distribution, +but in most cases the following will suffice:

    -	root# /etc/init.d/samba restart
    +root# /etc/init.d/samba restart
     

    -does the job. -

    Why is this better than security = server?

    -Currently, domain security in Samba doesn't free you from +

    Why Is This Better Than security = server?

    +Currently, domain security in Samba does not free you from having to create local UNIX users to represent the users attaching -to your server. This means that if domain user DOM\fred - attaches to your domain security Samba server, there needs +to your server. This means that if Domain user DOM\fred + attaches to your Domain Security Samba server, there needs to be a local UNIX user fred to represent that user in the UNIX -filesystem. This is very similar to the older Samba security mode -security = server, +file system. This is similar to the older Samba security mode +security = server, where Samba would pass through the authentication request to a Windows NT server in the same way as a Windows 95 or Windows 98 server would.

    - Please refer to the chapter on winbind for information on a system -to automatically assign UNIX uids and gids to Windows NT Domain users and groups. +Please refer to , for information on a system +to automatically assign UNIX UIDs and GIDs to Windows NT Domain users and groups.

    -The advantage to domain-level security is that the -authentication in domain-level security is passed down the authenticated +The advantage to Domain-level security is that the +authentication in Domain-level security is passed down the authenticated RPC channel in exactly the same way that an NT server would do it. This means Samba servers now participate in domain trust relationships in exactly the same way NT servers do (i.e., you can add Samba servers into a resource domain and have the authentication passed on from a resource domain PDC to an account domain PDC).

    -In addition, with security = server every Samba +In addition, with security = server, every Samba daemon on a server has to keep a connection open to the authenticating server for as long as that daemon lasts. This can drain the connection resources on a Microsoft NT server and cause it to run -out of available connections. With security = domain, +out of available connections. With security = domain, however, the Samba daemons connect to the PDC/BDC only for as long -as is necessary to authenticate the user, and then drop the connection, +as is necessary to authenticate the user and then drop the connection, thus conserving PDC connection resources.

    And finally, acting in the same manner as an NT server authenticating to a PDC means that as part of the authentication reply, the Samba server gets the user identification information such -as the user SID, the list of NT groups the user belongs to, etc. +as the user SID, the list of NT groups the user belongs to, and so on.

    Note

    -Much of the text of this document -was first published in the Web magazine -LinuxWorld as the article Doing -the NIS/NT Samba. -

    Samba ADS Domain Membership

    -This is a rough guide to setting up Samba 3.0 with Kerberos authentication against a -Windows2000 KDC. A familiarity with Kerberos is assumed. -

    Setup your smb.conf

    -You must use at least the following 3 options in smb.conf: -

    realm = your.kerberos.REALM
    security = ADS
    encrypt passwords = yes

    -In case samba can't figure out your ads server using your realm name, use the -ads server option in smb.conf: -

    ads server = your.kerberos.server

    +Much of the text of this document was first published in the Web magazine +LinuxWorld as the article http://www.linuxworld.com/linuxworld/lw-1998-10/lw-10-samba.html +Doing the NIS/NT Samba. +

    Samba ADS Domain Membership

    + + + + +This is a rough guide to setting up Samba-3 with Kerberos authentication against a +Windows 200x KDC. A familiarity with Kerberos is assumed. +

    Configure smb.conf

    +You must use at least the following three options in smb.conf: +

    realm = your.kerberos.REALM
    security = ADS
    # The following parameter need only be specified if present.
    # The default setting is not present is Yes.
    encrypt passwords = yes

    +In case samba cannot correctly identify the appropriate ADS server using the realm name, use the +password server option in smb.conf: +

    password server = your.kerberos.server

    Note

    You do not need a smbpasswd file, and older clients will be authenticated as -if security = domain, although it won't do any harm and -allows you to have local users not in the domain. It is expected that the above -required options will change soon when active directory integration will get -better. -

    Setup your /etc/krb5.conf

    -The minimal configuration for krb5.conf is: +if security = domain, although it will not do any harm and +allows you to have local users not in the domain. +

    Configure /etc/krb5.conf

    + + +With both MIT and Heimdal Kerberos, this is unnecessary, and may be detrimental. All ADS +domains will automatically create SRV records in the DNS zone _kerberos.REALM.NAME for +each KDC in the realm. MIT's, as well as Heimdal's, KRB5 libraries default to checking +for these records, so they will automatically find the KDCs. In addition, +krb5.conf only allows specifying a single KDC, even there if there is more +than one. Using the DNS lookup allows the KRB5 libraries to use whichever KDCs are available. +

    +When manually configuring krb5.conf, the minimal configuration is:

     [libdefaults]
        default_realm = YOUR.KERBEROS.REALM
    @@ -426,92 +443,146 @@ The minimal configuration for krb5.conf is:
     	YOUR.KERBEROS.REALM = {
     	kdc = your.kerberos.server
     	    }
    -

    +

    +When using Heimdal versions before 0.6 use the following configuration settings: +

    +[libdefaults]
    +   default_realm      = YOUR.KERBEROS.REALM
    +   default_etypes     = des-cbc-crc des-cbc-md5
    +   default_etypes_des = des-cbc-crc des-cbc-md5
    +
    +        [realms]
    +        YOUR.KERBEROS.REALM = {
    +        kdc = your.kerberos.server
    +            }
    +

    +

    + Test your config by doing a kinit USERNAME@REALM and making sure that your password is accepted by the Win2000 KDC. +

    +With Heimdal versions earlier than 0.6.x you only can use newly created accounts +in ADS or accounts that have had the password changed once after migration, or +in case of Administrator after installation. At the +moment, a Windows 2003 KDC can only be used with a Heimdal releases later than 0.6 +(and no default etypes in krb5.conf). Unfortunatly this whole area is still +in a state of flux.

    Note

    -The realm must be uppercase or you will get Cannot find KDC for -requested realm while getting initial credentials error (Kerberos +The realm must be in uppercase or you will get “Cannot find KDC for +requested realm while getting initial credentials” error (Kerberos is case-sensitive!).

    Note

    -Time between the two servers must be synchronized. You will get a -kinit(v5): Clock skew too great while getting initial credentials +Time between the two servers must be synchronized. You will get a +“kinit(v5): Clock skew too great while getting initial credentials” if the time difference is more than five minutes.

    +Clock skew limits are configurable in the Kerberos protocols. The default setting is +five minutes. +

    You also must ensure that you can do a reverse DNS lookup on the IP address of your KDC. Also, the name that this reverse lookup maps to -must either be the NetBIOS name of the KDC (ie. the hostname with no -domain attached) or it can alternatively be the NetBIOS name -followed by the realm. +must either be the NetBIOS name of the KDC (i.e., the hostname with no +domain attached) or it can alternately be the NetBIOS name followed by the realm.

    The easiest way to ensure you get this right is to add a /etc/hosts entry mapping the IP address of your KDC to -its NetBIOS name. If you don't get this right then you will get a +its NetBIOS name. If you do not get this correct then you will get a local error when you try to join the realm.

    If all you want is Kerberos support in smbclient then you can skip -straight to Test with smbclient now. -Creating a computer account -and testing your servers -is only needed if you want Kerberos support for smbd and winbindd. -

    Create the computer account

    -As a user that has write permission on the Samba private directory -(usually root) run: +directly to now. + and +are needed only if you want Kerberos support for smbd and winbindd. +

    Create the Computer Account

    +As a user who has write permission on the Samba private directory (usually root), run:

     root#  net ads join -U Administrator%password
     

    -

    Possible errors

    +

    +When making a Windows client a member of an ADS domain within a complex organization, you +may want to create the machine account within a particular organizational unit. Samba-3 permits +this to be done using the following syntax: +

    +root#   kinit Administrator@your.kerberos.REALM
    +root#  net ads join “organizational_unit
    +

    +

    +For example, you may want to create the machine account in a container called “Servers” +under the organizational directory “Computers\BusinessUnit\Department” like this: +

    +root#  net ads join "Computers\BusinessUnit\Department\Servers"
    +

    +

    Possible Errors

    ADS support not compiled in

    Samba must be reconfigured (remove config.cache) and recompiled - (make clean all install) after the Kerberos libs and headers are installed. + (make clean all install) after the Kerberos libiraries and headers files are installed.

    net ads join prompts for user name

    You need to login to the domain using kinit USERNAME@REALM. USERNAME must be a user who has rights to add a machine - to the domain.

    -

    Test your server setup

    + to the domain.

    Unsupported encryption/or checksum types

    + Make sure that the /etc/krb5.conf is correctly configured + for the type and version of Kerberos installed on the system. +

    +

    Testing Server Setup

    If the join was successful, you will see a new computer account with the -NetBIOS name of your Samba server in Active Directory (in the "Computers" +NetBIOS name of your Samba server in Active Directory (in the “Computers” folder under Users and Computers.

    -On a Windows 2000 client try net use * \\server\share. You should -be logged in with Kerberos without needing to know a password. If -this fails then run klist tickets. Did you get a ticket for the -server? Does it have an encoding type of DES-CBC-MD5 ? -

    Testing with smbclient

    +On a Windows 2000 client, try net use * \\server\share. You should +be logged in with Kerberos without needing to know a password. If this fails then run +klist tickets. Did you get a ticket for the server? Does it have +an encryption type of DES-CBC-MD5? +

    Note

    +Samba can use both DES-CBC-MD5 encryption as well as ARCFOUR-HMAC-MD5 encoding. +

    Testing with smbclient

    + On your Samba server try to login to a Win2000 server or your Samba server using smbclient and Kerberos. Use smbclient as usual, but specify the -k option to choose Kerberos authentication. -

    Notes

    +

    Notes

    You must change administrator password at least once after DC -install, to create the right encoding types -

    -W2k doesn't seem to create the _kerberos._udp and _ldap._tcp in -their defaults DNS setup. Maybe this will be fixed later in service packs. -

    Common Errors

    -In the process of adding / deleting / re-adding domain member machine accounts there are -many traps for the unwary player and there are many “little” things that can go wrong. -It is particularly interesting how often subscribers on the samba mailing list have concluded -after repeated failed attempts to add a machine account that it is necessary to "re-install" -MS Windows on t he machine. In truth, it is seldom necessary to reinstall because of this type -of problem. The real solution is often very simple, and with understanding of how MS Windows -networking functions easy to overcome. -

    Can Not Add Machine Back to Domain

    -“ A Windows workstation was reinstalled. The original domain machine +install, to create the right encryption types. +

    +Windows 200x does not seem to create the _kerberos._udp and _ldap._tcp in +the default DNS setup. Perhaps this will be fixed later in service packs. +

    Sharing User ID Mappings between Samba Domain Members

    +Samba maps UNIX users and groups (identified by UIDs and GIDs) to Windows users and groups (identified by SIDs). +These mappings are done by the idmap subsystem of Samba. +

    +In some cases it is useful to share these mappings between Samba Domain Members, +so name->id mapping is identical on all machines. +This may be needed in particular when sharing files over both CIFS and NFS. +

    To use the LDAP ldap idmap suffix, set:

    ldap idmap suffix = ou=Idmap,dc=quenya,dc=org

    See the smb.conf man page entry for the ldap idmap suffix +parameter for further information.

    +Do not forget to specify also the ldap admin dn +and to make certain to set the LDAP administrative password into the secrets.tdb using: +

    +root#  smbpasswd -w ldap-admin-password
    +

    Common Errors

    +In the process of adding/deleting/re-adding Domain Member machine accounts, there are +many traps for the unwary player and many “little” things that can go wrong. +It is particularly interesting how often subscribers on the Samba mailing list have concluded +after repeated failed attempts to add a machine account that it is necessary to “re-install” +MS Windows on the machine. In truth, it is seldom necessary to reinstall because of this type +of problem. The real solution is often quite simple and with an understanding of how MS Windows +networking functions, it is easy to overcome. +

    Cannot Add Machine Back to Domain

    +“A Windows workstation was re-installed. The original domain machine account was deleted and added immediately. The workstation will not join the domain if I use the same machine name. Attempts to add the machine fail with a message that the machine already -exists on the network - I know it doesn't. Why is this failing?” +exists on the network I know it does not. Why is this failing?”

    The original name is still in the NetBIOS name cache and must expire after machine account -deletion BEFORE adding that same name as a domain member again. The best advice is to delete -the old account and then to add the machine with a new name. -

    Adding Machine to Domain Fails

    - “Adding a Windows 200x or XP Professional machine to the Samba PDC Domain fails with a -message that, The machine could not be added at this time, there is a network problem. - Please try again later. Why?” -

    -You should check that there is an add machine script in your smb.conf +deletion before adding that same name as a Domain Member again. The best advice is to delete +the old account and then add the machine with a new name. +

    Adding Machine to Domain Fails

    +“Adding a Windows 200x or XP Professional machine to the Samba PDC Domain fails with a +message that, `The machine could not be added at this time, there is a network problem. +Please try again later.' Why?” +

    +You should check that there is an add machine script in your smb.conf file. If there is not, please add one that is appropriate for your OS platform. If a script -has been defined you will need to debug it's operation. Increase the log level +has been defined, you will need to debug its operation. Increase the log level in the smb.conf file to level 10, then try to rejoin the domain. Check the logs to see which operation is failing.

    @@ -519,16 +590,20 @@ Possible causes include:

    • The script does not actually exist, or could not be located in the path specified.

      - Corrective Action: Fix it. Make sure that when run manually - that the script will add both the UNIX system account _and_ the Samba SAM account. + Corrective action: Fix it. Make sure when run manually + that the script will add both the UNIX system account and the Samba SAM account.

    • - The machine could not be added to the UNIX system accounts file /etc/passwd + The machine could not be added to the UNIX system accounts file /etc/passwd.

      - Corrective Action: Check that the machine name is a legal UNIX - system account name. ie: If the UNIX utility useradd is called + Corrective action: Check that the machine name is a legal UNIX + system account name. If the UNIX utility useradd is called, then make sure that the machine name you are trying to add can be added using this tool. Useradd on some systems will not allow any upper case characters nor will it allow spaces in the name. -

    I can't join a Windows 2003 PDC

    Windows 2003 requires SMB signing. Client side SMB signing has - only been implemented partially in Samba 3.0. Set client use spnego = no when communicating - with a windows 2003 server.

    +

    +The add machine script does not create the +machine account in the Samba backend database, it is there only to create a UNIX system +account to which the Samba backend database account can be mapped. +

    I Can't Join a Windows 2003 PDC

    Windows 2003 requires SMB signing. Client side SMB signing has been implemented in Samba-3.0. + Set client use spnego = yes when communicating + with a Windows 2003 server.

    diff --git a/docs/htmldocs/findsmb.1.html b/docs/htmldocs/findsmb.1.html index a6013a13ec..ccbe179580 100644 --- a/docs/htmldocs/findsmb.1.html +++ b/docs/htmldocs/findsmb.1.html @@ -55,7 +55,7 @@ IP ADDR NETBIOS NAME WORKGROUP/OS/VERSION by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

    The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another - excellent piece of Open Source software, available at ftp://ftp.icce.rug.nl/pub/unix/) + excellent piece of Open Source software, available at ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.

    diff --git a/docs/htmldocs/groupmapping.html b/docs/htmldocs/groupmapping.html index 39d317e8cf..da8cf8f4b1 100644 --- a/docs/htmldocs/groupmapping.html +++ b/docs/htmldocs/groupmapping.html @@ -1,119 +1,164 @@ -Chapter 12. Mapping MS Windows and UNIX Groups

    Chapter 12. Mapping MS Windows and UNIX Groups

    Jean François Micouleau

    Gerald (Jerry) Carter

    Samba Team

    John H. Terpstra

    Samba Team

    +Chapter 12. Group Mapping MS Windows and UNIX

    Chapter 12. Group Mapping MS Windows and UNIX

    John H. Terpstra

    Samba Team

    Jean François Micouleau

    Gerald (Jerry) Carter

    Samba Team

    + Starting with Samba-3, new group mapping functionality is available to create associations between Windows group SIDs and UNIX groups. The groupmap subcommand included with the net tool can be used to manage these associations. +

    + The new facility for mapping NT Groups to UNIX system groups allows the administrator to decide + which NT Domain Groups are to be exposed to MS Windows clients. Only those NT Groups that map + to a UNIX group that has a value other than the default (-1) will be exposed + in group selection lists in tools that access domain users and groups.

    Warning

    - The first immediate reason to use the group mapping on a Samba PDC, is that - - the domain admin group has been removed and should no longer - be specified in smb.conf. This parameter was used to give the listed users membership - in the Domain Admins Windows group which gave local admin rights on their workstations + + The domain admin group parameter has been removed in Samba-3 and should no longer + be specified in smb.conf. This parameter was used to give the listed users membership in the + Domain Admins Windows group which gave local admin rights on their workstations (in default configurations). -

    Features and Benefits

    - Samba allows the administrator to create MS Windows NT4 / 200x group accounts and to +

    Features and Benefits

    + Samba allows the administrator to create MS Windows NT4/200x group accounts and to arbitrarily associate them with UNIX/Linux group accounts. -

    - Group accounts can be managed using the MS Windows NT4 or MS Windows 200x / XP Professional MMC tools. - Appropriate interface scripts should be provided in smb.conf if it is desired that UNIX / Linux system +

    + + + Group accounts can be managed using the MS Windows NT4 or MS Windows 200x/XP Professional MMC tools. + Appropriate interface scripts should be provided in smb.conf if it is desired that UNIX/Linux system accounts should be automatically created when these tools are used. In the absence of these scripts, and - so long as winbind is running, Samba accounts group accounts that are created using these tools will be - allocated UNIX UIDs/GIDs from the parameters set by the idmap uid/idmap gid settings - in the smb.conf file. -

    Figure 12.1. IDMAP groups

    IDMAP groups

    + so long as winbindd is running, Samba group accounts that are created using these + tools will be allocated UNIX UIDs/GIDs from the ID range specified by the + idmap uid/idmap gid + parameters in the smb.conf file. +

    Figure 12.1. IDMAP: group SID to GID resolution.

    IDMAP: group SID to GID resolution.

    Figure 12.2. IDMAP: GID resolution to matching SID.

    IDMAP: GID resolution to matching SID.

    + In both cases, when winbindd is not running, only locally resolvable groups can be recognized. Please refer to + and . The net groupmap is + used to establish UNIX group to NT SID mappings as shown in . +

    Figure 12.3. IDMAP storing group mappings.

    IDMAP storing group mappings.

    + + Administrators should be aware that where smb.conf group interface scripts make - direct calls to the UNIX/Linux system tools (eg: the shadow utilities, groupadd, - groupdel, groupmod) then the resulting UNIX/Linux group names will be subject - to any limits imposed by these tools. If the tool does NOT allow upper case characters - or space characters, then the creation of an MS Windows NT4 / 200x style group of + direct calls to the UNIX/Linux system tools (the shadow utilities, groupadd, + groupdel, and groupmod), the resulting UNIX/Linux group names will be subject + to any limits imposed by these tools. If the tool does not allow upper case characters + or space characters, then the creation of an MS Windows NT4/200x style group of Engineering Managers will attempt to create an identically named - UNIX/Linux group, an attempt that will of course fail! -

    + UNIX/Linux group, an attempt that will of course fail. +

    + + There are several possible work-arounds for the operating system tools limitation. One method is to use a script that generates a name for the UNIX/Linux system group that - fits the operating system limits, and that then just passes the UNIX/Linux group id (GID) + fits the operating system limits, and that then just passes the UNIX/Linux group ID (GID) back to the calling Samba interface. This will provide a dynamic work-around solution.

    Another work-around is to manually create a UNIX/Linux group, then manually create the - MS Windows NT4 / 200x group on the Samba server and then use the net groupmap + MS Windows NT4/200x group on the Samba server and then use the net groupmap tool to connect the two to each other. -

    Discussion

    - When installing MS Windows NT4 / 200x on a computer, the installation +

    Discussion

    + When installing MS Windows NT4/200x on a computer, the installation program creates default users and groups, notably the Administrators group, - and gives that group privileges necessary privileges to perform essential system tasks. - eg: Ability to change the date and time or to kill (or close) any process running on the + and gives that group privileges necessary privileges to perform essential system tasks, + such as the ability to change the date and time or to kill (or close) any process running on the local machine. -

    - The 'Administrator' user is a member of the 'Administrators' group, and thus inherits - 'Administrators' group privileges. If a 'joe' user is created to be a member of the - 'Administrator' group, 'joe' has exactly the same rights as 'Administrator'.

    - When an MS Windows NT4 / W200x is made a domain member, the "Domain Admins" group of the - PDC is added to the local 'Administrators' group of the workstation. Every member of the - 'Domain Administrators' group inherits the rights of the local 'Administrators' group when + + The Administrator user is a member of the Administrators group, and thus inherits + Administrators group privileges. If a joe user is created to be a member of the + Administrators group, joe has exactly the same rights as the user, + Administrator. +

    + When an MS Windows NT4/200x/XP machine is made a Domain Member, the “Domain Admins” group of the + PDC is added to the local Administrators group of the workstation. Every member of the + Domain Administrators group inherits the rights of the local Administrators group when logging on the workstation.

    - The following steps describe how to make Samba PDC users members of the 'Domain Admins' group? + The following steps describe how to make Samba PDC users members of the Domain Admins group?

    1. - create a unix group (usually in /etc/group), let's call it domadm -

    2. add to this group the users that must be Administrators. For example - if you want joe, john and mary, your entry in /etc/group will - look like: + Create a UNIX group (usually in /etc/group), let's call it domadm. +

    3. + Add to this group the users that must be “Administrators”. For example, + if you want joe, john and mary to be administrators, + your entry in /etc/group will look like this:

       		domadm:x:502:joe,john,mary
       		

    4. - Map this domadm group to the "Domain Admins" group by running the command: + Map this domadm group to the “Domain Admins” group by running the command:

      -

      -root# net groupmap add ntgroup="Domain Admins" unixgroup=domadm
      -

      -

      - The quotes around "Domain Admins" are necessary due to the space in the group name. - Also make sure to leave no whitespace surrounding the equal character (=). +

      +	root# net groupmap add ntgroup=“Domain Admins” UNIXgroup=domadm
      +	

      +

      + + The quotes around “Domain Admins” are necessary due to the space in the group name. + Also make sure to leave no white-space surrounding the equal character (=).

    - Now joe, john and mary are domain administrators! -

    - It is possible to map any arbitrary UNIX group to any Windows NT4 / 200x group as well as - making any UNIX group a Windows domain group. For example, if you wanted to include a - UNIX group (e.g. acct) in a ACL on a local file or printer on a domain member machine, + Now joe, john and mary are domain administrators. +

    + + It is possible to map any arbitrary UNIX group to any Windows NT4/200x group as well as + making any UNIX group a Windows domain group. For example, if you wanted to include a + UNIX group (e.g., acct) in an ACL on a local file or printer on a Domain Member machine, you would flag that group as a domain group by running the following on the Samba PDC:

    -root# net groupmap add rid=1000 ntgroup="Accounting" unixgroup=acct
    +root# net groupmap add rid=1000 ntgroup="Accounting" UNIXgroup=acct
     

    - Be aware that the RID parameter is a unsigned 32 bit integer that should - normally start at 1000. However, this rid must not overlap with any RID assigned - to a user. Verifying this is done differently depending on the passdb backend - you are using. Future versions of the tools may perform the verification automatically, + Be aware that the RID parameter is a unsigned 32-bit integer that should + normally start at 1000. However, this RID must not overlap with any RID assigned + to a user. Verification for this is done differently depending on the passdb backend + you are using. Future versions of the tools may perform the verification automatically, but for now the burden is on you. -

    Example Configuration

    - You can list the various groups in the mapping database by executing - net groupmap list. Here is an example: -

    +

    Default Users, Groups and Relative Identifiers

    + + + When first installed, Microsoft Windows NT4/200x/XP are preconfigured with certain User, Group, and + Alias entities. Each has a well-known Relative Identifier (RID). These must be preserved for continued + integrity of operation. Samba must be provisioned with certain essential Domain Groups that require + the appropriate RID value. When Samba-3 is configured to use tdbsam the essential + Domain Groups are automatically created. It is the LDAP administrators' responsibility to create + (provision) the default NT Groups. +

    + Each essential Domain Group must be assigned its respective well-kown RID. The default Users, Groups, + Aliases, and RIDs are shown in . +

    Note

    + When the passdb backend uses LDAP (ldapsam) it is the + admininstrators' responsibility to create the essential Domain Groups, and to assign each its default RID. +

    + It is permissible to create any Domain Group that may be necessary, just make certain that the essential + Domain Groups (well known) have been created and assigned its default RID. Other groups you create may + be assigned any arbitrary RID you care to use. +

    + Be sure to map each Domain Group to a UNIX system group. That is the only way to ensure that the group + will be available for use as an NT Domain Group. +

    +

    Table 12.1. Well-Known User Default RIDs

    Well-Known EntityRIDTypeEssential
    Domain Administrator500UserNo
    Domain Guest501UserNo
    Domain KRBTGT502UserNo
    Domain Admins512GroupYes
    Domain Users513GroupYes
    Domain Guests514GroupYes
    Domain Computers515GroupNo
    Domain Controllers516GroupNo
    Domain Certificate Admins517GroupNo
    Domain Schema Admins518GroupNo
    Domain Enterprise Admins519GroupNo
    Domain Policy Admins520GroupNo
    Builtin Admins544AliasNo
    Builtin users545AliasNo
    Builtin Guests546AliasNo
    Builtin Power Users547AliasNo
    Builtin Account Operators548AliasNo
    Builtin System Operators549AliasNo
    Builtin Print Operators550AliasNo
    Builtin Backup Operators551AliasNo
    Builtin Replicator552AliasNo
    Builtin RAS Servers553AliasNo

    +

    Example Configuration

    + You can list the various groups in the mapping database by executing + net groupmap list. Here is an example: +

     root#  net groupmap list
    -System Administrators (S-1-5-21-2547222302-1596225915-2414751004-1002) -> sysadmin
     Domain Admins (S-1-5-21-2547222302-1596225915-2414751004-512) -> domadmin
     Domain Users (S-1-5-21-2547222302-1596225915-2414751004-513) -> domuser
     Domain Guests (S-1-5-21-2547222302-1596225915-2414751004-514) -> domguest
     

    For complete details on net groupmap, refer to the net(8) man page. -

    Configuration Scripts

    +

    Configuration Scripts

    Everyone needs tools. Some of us like to create our own, others prefer to use canned tools - (ie: prepared by someone else for general use). -

    Sample smb.conf add group script

    - A script to create complying group names for use by the Samba group interfaces: -

    -

    Example 12.1. smbgrpadd.sh

    +	(i.e., prepared by someone else for general use). 
    +	

    Sample smb.conf Add Group Script

    + A script to create complying group names for use by the Samba group interfaces + is provided in . +

    +

    Example 12.1. smbgrpadd.sh

     
     #!/bin/bash
     
     # Add the group using normal system groupadd tool.
     groupadd smbtmpgrp00
     
    -thegid=`cat /etc/group | grep smbtmpgrp00 | cut -d ":" -f3`
    +thegid=`cat /etc/group | grep smbtmpgrp00 | cut -d ":" -f3`
     
     # Now change the name to what we want for the MS Windows networking end
     cp /etc/group /etc/group.bak
    @@ -124,73 +169,82 @@ echo $thegid
     exit 0
     

    - The smb.conf entry for the above script would look like: -

    add group script = /path_to_tool/smbgrpadd.sh %g

    -

    Script to configure Group Mapping

    + The smb.conf entry for the above script would be something like that in . +

    Example 12.2. Configuration of smb.conf for the add group script.

    [global]
    ...
    add group script = /path_to_tool/smbgrpadd.sh %g
    ...

    +

    Script to Configure Group Mapping

    In our example we have created a UNIX/Linux group called ntadmin. - Our script will create the additional groups Orks, Elves, Gnomes: + Our script will create the additional groups Orks, Elves, and Gnomes. + It is a good idea to save this shell script for later re-use just in case you ever need to rebuild your mapping database. + For the sake of concenience we elect to save this script as a file called initGroups.sh. + This script is given in .

    -

    +
    +

    Example 12.3. Script to Set Group Mapping

     #!/bin/bash
     
    -net groupmap modify ntgroup="Domain Admins" unixgroup=ntadmin
    -net groupmap modify ntgroup="Domain Users" unixgroup=users
    -net groupmap modify ntgroup="Domain Guests" unixgroup=nobody
    -net groupmap modify ntgroup="Administrators" unixgroup=root
    -net groupmap modify ntgroup="Users" unixgroup=users
    -net groupmap modify ntgroup="Guests" unixgroup=nobody
    -net groupmap modify ntgroup="System Operators" unixgroup=sys
    -net groupmap modify ntgroup="Account Operators" unixgroup=root
    -net groupmap modify ntgroup="Backup Operators" unixgroup=bin
    -net groupmap modify ntgroup="Print Operators" unixgroup=lp
    -net groupmap modify ntgroup="Replicators" unixgroup=daemon
    -net groupmap modify ntgroup="Power Users" unixgroup=sys
    +net groupmap modify ntgroup="Domain Admins" unixgroup=ntadmin
    +net groupmap modify ntgroup="Domain Users" unixgroup=users
    +net groupmap modify ntgroup="Domain Guests" unixgroup=nobody
     
     groupadd Orks
     groupadd Elves
     groupadd Gnomes
     
    -net groupmap add ntgroup="Orks"       unixgroup=Orks         type=d
    -net groupmap add ntgroup="Elves"      unixgroup=Elves        type=d
    -net groupmap add ntgroup="Gnomes"     unixgroup=Gnomes       type=d
    -

    +net groupmap add ntgroup="Orks" unixgroup=Orks type=d +net groupmap add ntgroup="Elves" unixgroup=Elves type=d +net groupmap add ntgroup="Gnomes" unixgroup=Gnomes type=d +

    Of course it is expected that the administrator will modify this to suit local needs. For information regarding the use of the net groupmap tool please refer to the man page. -

    Common Errors

    +

    Common Errors

    At this time there are many little surprises for the unwary administrator. In a real sense it is imperative that every step of automated control scripts must be carefully tested manually before putting them into active service. -

    Adding Groups Fails

    +

    Adding Groups Fails

    This is a common problem when the groupadd is called directly - by the Samba interface script for the add group script in + by the Samba interface script for the add group script in the smb.conf file.

    The most common cause of failure is an attempt to add an MS Windows group account that has either an upper case character and/or a space character in it.

    - There are three possible work-arounds. Firstly, use only group names that comply + There are three possible work-arounds. First, use only group names that comply with the limitations of the UNIX/Linux groupadd system tool. - The second involves use of the script mentioned earlier in this chapter, and the - third option is to manually create a UNIX/Linux group account that can substitute + Second, it involves the use of the script mentioned earlier in this chapter, and + third is the option is to manually create a UNIX/Linux group account that can substitute for the MS Windows group name, then use the procedure listed above to map that group to the MS Windows group. -

    Adding MS Windows Groups to MS Windows Groups Fails

    - Samba-3 does NOT support nested groups from the MS Windows control environment. -

    Adding Domain Users to the Power Users group

    +

    Adding MS Windows Groups to MS Windows Groups Fails

    + Samba-3 does not support nested groups from the MS Windows control environment. +

    Adding Domain Users to the Power Users Group

    What must I do to add Domain Users to the Power Users group? -

    - The Power Users group is a group that is local to each Windows - 200x / XP Professional workstation. You can not add the Domain Users group to the Power Users - group automatically, this must be done on each workstation by logging in as the local workstation - administrator and then using click on Start / Control Panel / Users and Passwords - now click on the 'Advanced' tab, then on the 'Advanced' Button. -

    - Now click on 'Groups', then double click on 'Power Users'. This will launch the panel to add users - or groups to the local machine 'Power Uses' group. Click on the 'Add' button, select the domain - from which the 'Domain Users' group is to be added, double click on the 'Domain Users' group, then - click on the 'Ok' button. Note: If a logon box is presented during this process please remember to - enter the connect as DOMAIN\UserName. ie: For the domain MIDEARTH and the user 'root' enter - MIDEARTH\root. -

    + ”

    + The Power Users group is a group that is local to each Windows 200x/XP Professional workstation. + You cannot add the Domain Users group to the Power Users group automatically, it must be done on + each workstation by logging in as the local workstation administrator and + then using the following procedure: +

    1. + Click Start -> Control Panel -> Users and Passwords. +

    2. + Click the Advanced tab. +

    3. + Click the Advanced button. +

    4. + Click Groups. +

    5. + Double click Power Users. This will launch the panel to add users or groups + to the local machine Power Uses group. +

    6. + Click the Add button. +

    7. + Select the domain from which the Domain Users group is to be added. +

    8. + Double click the Domain Users group. +

    9. + Click the Ok button. If a logon box is presented during this process + please remember to enter the connect as DOMAIN\UserName. i.e., For the + domain MIDEARTH and the user root enter + MIDEARTH\root. +

    diff --git a/docs/htmldocs/install.html b/docs/htmldocs/install.html index 02264c558d..5b9d658984 100644 --- a/docs/htmldocs/install.html +++ b/docs/htmldocs/install.html @@ -1,115 +1,130 @@ -Chapter 2. How to Install and Test SAMBA

    Chapter 2. How to Install and Test SAMBA

    Andrew Tridgell

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Karl Auer

    Obtaining and installing samba

    - Binary packages of samba are included in almost any Linux or +Chapter 2. How to Install and Test SAMBA

    Chapter 2. How to Install and Test SAMBA

    Andrew Tridgell

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Karl Auer

    Dan Shearer

    Samba Team

    Obtaining and Installing Samba

    + Binary packages of Samba are included in almost any Linux or UNIX distribution. There are also some packages available at - the samba homepage. -

    If you need to compile samba from source, check - the chapter about compiling samba from scratch.

    If you have already installed samba, or if your operating system - was pre-installed with samba, then you may not need to bother with this - chapter. On the other hand, you may want to read this chapter anyhow - for information about updating samba.

    Configuring samba (smb.conf)

    - Samba's configuration is stored in the smb.conf file, - that usually resides in /etc/samba/smb.conf + the Samba homepage. Refer to + the manual of your operating system for details on installing packages + for your specific operating system. +

    If you need to compile Samba from source, check + .

    Configuring Samba (smb.conf)

    + Samba's configuration is stored in the smb.conf file, which + usually resides in /etc/samba/smb.conf or /usr/local/samba/lib/smb.conf. You can either edit this file yourself or do it using one of the many graphical - tools that are available, such as the web-based interface swat, that - is included with samba. -

    Example Configuration

    + tools that are available, such as the Web-based interface SWAT, that + is included with Samba. +

    Configuration file syntax

    The smb.conf file uses the same syntax as the various old + .ini files in Windows 3.1: Each file consists of various sections, + which are started by putting the section name between brackets ([]) + on a new line. Each contains zero or more key/value-pairs seperated by an + equality sign (=). The file is just a plain-text file, so you can + open and edit it with your favorite editing tool.

    Each section in the smb.conf file represents a share + on the Samba server. The section “global” is special, since it + contains settings that apply to the whole Samba server and not + to one share in particular.

    contains a very minimal smb.conf. + +

    Example 2.1. A minimal smb.conf

    [global]
    workgroup = WKG
    netbios name = MYNAME
    [share1]
    path = /tmp
    [share2]
    path = /my_shared_folder
    comment = Some random files

    Example Configuration

    There are sample configuration files in the examples subdirectory in the - distribution. I suggest you read them carefully so you can see how the options - go together in practice. See the man page for all the options. + distribution. It is suggested you read them carefully so you can see how the options + go together in practice. See the man page for all the options. + It might be worthwhile to start out with the smb.conf.default + configuration file and adapt it to your needs. It contains plenty of + comments.

    - The simplest useful configuration file would be something like this: + The simplest useful configuration file would contain something like shown in + .

    -

    Example 2.1. Simplest possible smb.conf file

    [global]
    workgroup = MIDEARTH
    [homes]
    guest ok = no
    read only = no

    + +

    Example 2.2. Another simple smb.conf File

    [global]
    workgroup = MIDEARTH
    [homes]
    guest ok = no
    read only = no

    This will allow connections by anyone with an account on the server, using either - their login name or homes" as the service name. - (Note that the workgroup that Samba must also be set.) + their login name or homes as the service name. + (Note: The workgroup that Samba should appear in must also be set. The default + workgroup name is WORKGROUP.)

    - Make sure you put the smb.conf file in the correct place - (usually in /etc/samba). + Make sure you put the smb.conf file in the correct place.

    For more information about security settings for the [homes] share please refer to - "Securing Samba". -

    Test your config file with testparm

    - It's important that you test the validity of your smb.conf - file using the testparm program. If testparm runs OK - then it will list the loaded services. If not it will give an error message. + . +

    Test Your Config File with testparm

    + It's important to validate the contents of the smb.conf file using the testparm program. + If testparm runs correctly, it will list the loaded services. If not, it will give an error message. + Make sure it runs correctly and that the services look reasonable before proceeding. Enter the command: +

    +	root#  testparm /etc/samba/smb.conf
    +	

    Testparm will parse your configuration file and report + any unknown parameters or incorrect syntax.

    + Always run testparm again whenever the smb.conf file is changed! +

    SWAT

    + + SWAT is a Web-based interface that can be used to facilitate the configuration of Samba. + SWAT might not be available in the Samba package that shipped with your platform, + but in a separate package. Please read the SWAT manpage + on compiling, installing and configuring SWAT from source.

    - Make sure it runs OK and that the services look reasonable before proceeding. + To launch SWAT, just run your favorite Web browser and point it to + http://localhost:901/. + Replace localhost with the name of the computer on which + Samba is running if that is a different computer than your browser.

    - Always run testparm again when you change smb.conf! -

    SWAT

    - SWAT is a web-based interface that helps you configure samba. - SWAT might not be available in the samba package on your platform, - but in a separate package. Please read the swat manpage - on compiling, installing and configuring swat from source. -

    - To launch SWAT just run your favorite web browser and - point it at http://localhost:901/. Replace - localhost - with the name of the computer you are running samba on if you - are running samba on a different computer than your browser. -

    - Note that you can attach to SWAT from any IP connected - machine but connecting from a remote machine leaves your - connection open to password sniffing as passwords will be sent - in the clear over the wire. -

    Try listing the shares available on your - server

    +	SWAT can be used from a browser on any IP-connected machine, but be aware that connecting from a remote
    +	machine leaves your connection open to password sniffing as passwords will be sent over the wire in the clear. 
    +	

    More information about SWAT can be found in .

    List Shares Available on the Server

    + To list shares that are available from the configured Samba server execute the + following command: +

     $ smbclient -L yourhostname
    -

    You should get back a list of shares available on - your server. If you don't then something is incorrectly setup. - Note that this method can also be used to see what shares - are available on other LanManager clients (such as WfWg).

    If you choose user level security then you may find - that Samba requests a password before it will list the shares. - See the smbclient man page for details. (you - can force it to list the shares without a password by - adding the option -U% to the command line. This will not work - with non-Samba servers)

    Try connecting with the unix client

    +

    You should see a list of shares available on your server. If you do not, then + something is incorrectly configured. This method can also be used to see what shares + are available on other SMB servers, such as Windows 2000.

    If you choose user-level security you may find that Samba requests a password + before it will list the shares. See the smbclient man page for details. + You can force it to list the shares without a password by adding the option + -N to the command line.

    Connect with a UNIX Client

    + Enter the following command:

     $ smbclient  //yourhostname/aservice
    -

    Typically the yourhostname - would be the name of the host where you installed smbd. - The aservice is - any service you have defined in the smb.conf - file. Try your user name if you just have a [homes] - section - in smb.conf.

    For example if your unix host is bambi - and your login name is fred you would type:

    +

    Typically yourhostname is the name of the host on which smbd + has been installed. The aservice is any service that has been defined in the smb.conf + file. Try your user name if you just have a [homes] section in the smb.conf file.

    Example: If the UNIX host is called bambi and a valid login name + is fred, you would type:

     $ smbclient //bambi/fred
    -

    Try connecting from another SMB client

    Try mounting disks. from a DOS, Windows or OS/2 client, eg:

    +

    Connect from a Remote SMB Client

    Now that Samba is working correctly locally, you can try to + access it from other clients. Within a few minutes, the Samba host + should be listed in the Network Neighborhood on all Windows + clients of its subnet. Try browsing the server from another client + or 'mounting' it.

    Mounting disks from a DOS, Windows or OS/2 client can be done by running a command such as:

     C:\> net use d: \\servername\service
    -

    Try printing. eg:

    +

    Try printing, e.g.

     C:\> net use lpt1:	\\servername\spoolservice
     

    C:\> print filename
    -

    What If Things Don't Work?

    Then you might read the file chapter diagnosis - and the FAQ. If you are still stuck then refer to "Analysing and solving problems". - Samba has been successfully installed at thousands of sites worldwide, - so maybe someone else has hit your problem and has overcome it.

    Common Errors

    -The following questions and issues get raised on the samba mailing list over and over again. -

    Large number of smbd processes

    -Samba consists on three core programs: -nmbd, smbd, winbindd. nmbd is the name server message daemon, -smbd is the server message daemon, winbindd is the daemon that -handles communication with Domain Controllers. +

    What If Things Don't Work?

    You might want to read . + If you are still stuck, refer to . + Samba has been successfully installed at thousands of sites worldwide. + It is unlikely that your particular problem is unique, so it might be + productive to perform an Internet search to see if someone else has encountered + your problem and has found a way to overcome it.

    Common Errors

    +The following questions and issues are raised repeatedly on the Samba mailing list. +

    Large Number of smbd Processes

    +Samba consists of three core programs: nmbd, smbd, and winbindd. nmbd is the name server message daemon, +smbd is the server message daemon, and winbindd is the daemon that handles communication with Domain Controllers.

    -If your system is NOT running as a WINS server, then there will be one (1) single instance of +If Samba is not running as a WINS server, then there will be one single instance of nmbd running on your system. If it is running as a WINS server then there will be -two (2) instances - one to handle the WINS requests. +two instances one to handle the WINS requests.

    -smbd handles ALL connection requests and then spawns a new process for each client -connection made. That is why you are seeing so many of them, one (1) per client connection. +smbd handles all connection requests. It spawns a new process for each client +connection made. That is why you may see so many of them, one per client connection.

    winbindd will run as one or two daemons, depending on whether or not it is being -run in "split mode" (in which case there will be two instances). -

    "open_oplock_ipc: Failed to get local UDP socket for address 100007f. Error was Cannot assign requested"

    Your loopback device isn't working correctly. Make sure it's configured properly. The loopback device is an internal (virtual) network device with - the ip address 127.0.0.1. Read your OS documentation for details - on how to configure the loopback on your system.

    "The network name cannot be found"

    - This error can be caused by one of these misconfigurations: -

    • You specified an nonexisting path for the share in smb.conf

    • The user you are trying to access the share with does not - have sufficient permissions to access the path for the share. Both read (r) and access (x) should be possible.

    • The share you are trying to access does not exist.

    +run in split mode (in which case there will be two instances). +

    Error Message: open_oplock_ipc

    An error message is observed in the log files when smbd is started: “open_oplock_ipc: Failed to get local UDP socket + for address 100007f. Error was Cannot assign requested.

    Your loopback device isn't working correctly. Make sure it is configured correctly. The loopback + device is an internal (virtual) network device with the IP address 127.0.0.1. + Read your OS documentation for details on how to configure the loopback on your system.

    The network name cannot be found

    + This error can be caused by one of these misconfigurations: +

    • You specified an nonexisting path + for the share in smb.conf.

    • The user you are trying to access the share with does not + have sufficient permissions to access the path for + the share. Both read (r) and access (x) should be possible.

    • The share you are trying to access does not exist.

    diff --git a/docs/htmldocs/integrate-ms-networks.html b/docs/htmldocs/integrate-ms-networks.html index 73971d2a72..2e75885499 100644 --- a/docs/htmldocs/integrate-ms-networks.html +++ b/docs/htmldocs/integrate-ms-networks.html @@ -1,121 +1,126 @@ -Chapter 26. Integrating MS Windows networks with Samba

    Chapter 26. Integrating MS Windows networks with Samba

    John H. Terpstra

    Samba Team

    (Jan 01 2001)

    +Chapter 26. Integrating MS Windows Networks with Samba

    Chapter 26. Integrating MS Windows Networks with Samba

    John H. Terpstra

    Samba Team

    (Jan 01 2001)

    + This section deals with NetBIOS over TCP/IP name to IP address resolution. If -your MS Windows clients are NOT configured to use NetBIOS over TCP/IP then this -section does not apply to your installation. If your installation involves use of +your MS Windows clients are not configured to use NetBIOS over TCP/IP, then this +section does not apply to your installation. If your installation +involves the use of NetBIOS over TCP/IP then this section may help you to resolve networking problems.

    Note

    - NetBIOS over TCP/IP has nothing to do with NetBEUI. NetBEUI is NetBIOS - over Logical Link Control (LLC). On modern networks it is highly advised - to NOT run NetBEUI at all. Note also that there is NO such thing as - NetBEUI over TCP/IP - the existence of such a protocol is a complete - and utter mis-apprehension. -

    Features and Benefits

    +NetBIOS over TCP/IP has nothing to do with NetBEUI. NetBEUI is NetBIOS +over Logical Link Control (LLC). On modern networks it is highly advised +to not run NetBEUI at all. Note also there is no such thing as +NetBEUI over TCP/IP the existence of such a protocol is a complete +and utter misapprehension. +

    Features and Benefits

    Many MS Windows network administrators have never been exposed to basic TCP/IP networking as it is implemented in a UNIX/Linux operating system. Likewise, many UNIX and -Linux administrators have not been exposed to the intricacies of MS Windows TCP/IP based +Linux administrators have not been exposed to the intricacies of MS Windows TCP/IP-based networking (and may have no desire to be either).

    This chapter gives a short introduction to the basics of how a name can be resolved to -it's IP address for each operating system environment. -

    Background Information

    -Since the introduction of MS Windows 2000 it is possible to run MS Windows networking +its IP address for each operating system environment. +

    Background Information

    +Since the introduction of MS Windows 2000, it is possible to run MS Windows networking without the use of NetBIOS over TCP/IP. NetBIOS over TCP/IP uses UDP port 137 for NetBIOS name resolution and uses TCP port 139 for NetBIOS session services. When NetBIOS over -TCP/IP is disabled on MS Windows 2000 and later clients then only TCP port 445 will be -used and UDP port 137 and TCP port 139 will not. +TCP/IP is disabled on MS Windows 2000 and later clients, then only the TCP port 445 will be +used and the UDP port 137 and TCP port 139 will not.

    Note

    -When using Windows 2000 or later clients, if NetBIOS over TCP/IP is NOT disabled, then +When using Windows 2000 or later clients, if NetBIOS over TCP/IP is not disabled, then the client will use UDP port 137 (NetBIOS Name Service, also known as the Windows Internet -Name Service or WINS), TCP port 139 AND TCP port 445 (for actual file and print traffic). +Name Service or WINS), TCP port 139 and TCP port 445 (for actual file and print traffic).

    -When NetBIOS over TCP/IP is disabled the use of DNS is essential. Most installations that +When NetBIOS over TCP/IP is disabled, the use of DNS is essential. Most installations that disable NetBIOS over TCP/IP today use MS Active Directory Service (ADS). ADS requires - + Dynamic DNS with Service Resource Records (SRV RR) and with Incremental Zone Transfers (IXFR). - + Use of DHCP with ADS is recommended as a further means of maintaining central control -over client workstation network configuration. -

    Name Resolution in a pure UNIX/Linux world

    +over the client workstation network configuration. +

    Name Resolution in a Pure UNIX/Linux World

    The key configuration files covered in this section are: -

    • /etc/hosts

    • /etc/resolv.conf

    • /etc/host.conf

    • /etc/nsswitch.conf

    /etc/hosts

    -Contains a static list of IP addresses and names. -eg: +

    • /etc/hosts

    • /etc/resolv.conf

    • /etc/host.conf

    • /etc/nsswitch.conf

    /etc/hosts

    +This file contains a static list of IP addresses and names.

     127.0.0.1	localhost localhost.localdomain
    -192.168.1.1	bigbox.caldera.com	bigbox	alias4box
    +192.168.1.1	bigbox.quenya.org	bigbox	alias4box
     

    The purpose of /etc/hosts is to provide a -name resolution mechanism so that uses do not need to remember +name resolution mechanism so uses do not need to remember IP addresses.

    Network packets that are sent over the physical network transport layer communicate not via IP addresses but rather using the Media Access Control address, or MAC address. IP addresses are currently 32 bits in length and are typically presented as four (4) decimal -numbers that are separated by a dot (or period). eg: 168.192.1.1. -

    +numbers that are separated by a dot (or period). For example, 168.192.1.1. +

    + MAC Addresses use 48 bits (or 6 bytes) and are typically represented -as two digit hexadecimal numbers separated by colons. eg: -40:8e:0a:12:34:56 +as two-digit hexadecimal numbers separated by colons: 40:8e:0a:12:34:56.

    -Every network interface must have an MAC address. Associated with -a MAC address there may be one or more IP addresses. There is NO -relationship between an IP address and a MAC address, all such assignments -are arbitrary or discretionary in nature. At the most basic level all -network communications takes place using MAC addressing. Since MAC -addresses must be globally unique, and generally remains fixed for +Every network interface must have a MAC address. Associated with +a MAC address may be one or more IP addresses. There is no +relationship between an IP address and a MAC address; all such assignments +are arbitrary or discretionary in nature. At the most basic level, all +network communications take place using MAC addressing. Since MAC +addresses must be globally unique and generally remain fixed for any particular interface, the assignment of an IP address makes sense from a network management perspective. More than one IP address can -be assigned per MAC address. One address must be the primary IP address, +be assigned per MAC address. One address must be the primary IP +address this is the address that will be returned in the ARP reply.

    -When a user or a process wants to communicate with another machine -the protocol implementation ensures that the "machine name" or "host -name" is resolved to an IP address in a manner that is controlled +When a user or a process wants to communicate with another machine, +the protocol implementation ensures that the “machine name” or “host +name” is resolved to an IP address in a manner that is controlled by the TCP/IP configuration control files. The file /etc/hosts is one such file.

    When the IP address of the destination interface has been -determined a protocol called ARP/RARP is used to identify +determined, a protocol called ARP/RARP is used to identify the MAC address of the target interface. ARP stands for Address -Resolution Protocol, and is a broadcast oriented method that -uses UDP (User Datagram Protocol) to send a request to all -interfaces on the local network segment using the all 1's MAC +Resolution Protocol and is a broadcast-oriented method that +uses User Datagram Protocol (UDP) to send a request to all +interfaces on the local network segment using the all 1s MAC address. Network interfaces are programmed to respond to two MAC addresses only; their own unique address and the address ff:ff:ff:ff:ff:ff. The reply packet from an ARP request will contain the MAC address and the primary IP address for each interface. -

    +

    + The /etc/hosts file is foundational to all UNIX/Linux TCP/IP installations and as a minimum will contain the localhost and local network interface IP addresses and the primary names by which they are known within the local machine. -This file helps to prime the pump so that a basic level of name +This file helps to prime the pump so a basic level of name resolution can exist before any other method of name resolution becomes available. -

    /etc/resolv.conf

    +

    /etc/resolv.conf

    This file tells the name resolution libraries:

    • The name of the domain to which the machine - belongs + belongs.

    • The name(s) of any domains that should be automatically searched when trying to resolve unqualified - host names to their IP address + host names to their IP address.

    • The name or IP address of available Domain - Name Servers that may be asked to perform name to address - translation lookups -

    /etc/host.conf

    + Name Servers that may be asked to perform name-to-address + translation lookups. +

    /etc/host.conf

    + /etc/host.conf is the primary means by -which the setting in /etc/resolv.conf may be affected. It is a -critical configuration file. This file controls the order by +which the setting in /etc/resolv.conf may be effected. It is a +critical configuration file. This file controls the order by which name resolution may proceed. The typical structure is:

     order hosts,bind
     multi on
     

    then both addresses should be returned. Please refer to the -man page for host.conf for further details. -

    /etc/nsswitch.conf

    +man page for host.conf for further details. +

    /etc/nsswitch.conf

    + This file controls the actual name resolution targets. The file typically has resolver object specifications as follows:

    @@ -144,45 +149,47 @@ Of course, each of these mechanisms requires that the appropriate
     facilities and/or services are correctly configured.
     

    It should be noted that unless a network request/message must be -sent, TCP/IP networks are silent. All TCP/IP communications assumes a +sent, TCP/IP networks are silent. All TCP/IP communications assume a principal of speaking only when necessary. -

    -Starting with version 2.2.0 samba has Linux support for extensions to -the name service switch infrastructure so that linux clients will +

    + +Starting with version 2.2.0, Samba has Linux support for extensions to +the name service switch infrastructure so Linux clients will be able to obtain resolution of MS Windows NetBIOS names to IP -Addresses. To gain this functionality Samba needs to be compiled -with appropriate arguments to the make command (i.e.: make +Addresses. To gain this functionality, Samba needs to be compiled +with appropriate arguments to the make command (i.e., make nsswitch/libnss_wins.so). The resulting library should then be installed in the /lib directory and -the "wins" parameter needs to be added to the "hosts:" line in -the /etc/nsswitch.conf file. At this point it +the wins parameter needs to be added to the “hosts:” line in +the /etc/nsswitch.conf file. At this point, it will be possible to ping any MS Windows machine by its NetBIOS -machine name, so long as that machine is within the workgroup to -which both the samba machine and the MS Windows machine belong. -

    Name resolution as used within MS Windows networking

    +machine name, as long as that machine is within the workgroup to +which both the Samba machine and the MS Windows machine belong. +

    Name Resolution as Used within MS Windows Networking

    MS Windows networking is predicated about the name each machine is given. This name is known variously (and inconsistently) as -the "computer name", "machine name", "networking name", "netbios name", -or "SMB name". All terms mean the same thing with the exception of -"netbios name" which can apply also to the name of the workgroup or the -domain name. The terms "workgroup" and "domain" are really just a +the “computer name,” “machine name,” “networking name,” “netbios name,” +or “SMB name.” All terms mean the same thing with the exception of +“netbios name” that can also apply to the name of the workgroup or the +domain name. The terms “workgroup” and “domain” are really just a simple name with which the machine is associated. All NetBIOS names -are exactly 16 characters in length. The 16th character is reserved. -It is used to store a one byte value that indicates service level +are exactly 16 characters in length. The 16th character is reserved. +It is used to store a one-byte value that indicates service level information for the NetBIOS name that is registered. A NetBIOS machine -name is therefore registered for each service type that is provided by +name is, therefore, registered for each service type that is provided by the client/server.

    -The following are typical NetBIOS name/service type registrations: -

    Table 26.1. Unique NetBIOS names

    MACHINENAME<00>Server Service is running on MACHINENAME
    MACHINENAME<03>Generic Machine Name (NetBIOS name)
    MACHINENAME<20>LanMan Server service is running on MACHINENAME
    WORKGROUP<1b>Domain Master Browser

    Table 26.2. Group Names

    WORKGROUP<03>Generic Name registered by all members of WORKGROUP
    WORKGROUP<1c>Domain Controllers / Netlogon Servers
    WORKGROUP<1d>Local Master Browsers
    WORKGROUP<1e>Internet Name Resolvers

    - + and list typical NetBIOS name/service type registrations. +

    Table 26.1. Unique NetBIOS Names

    MACHINENAME<00>Server Service is running on MACHINENAME
    MACHINENAME<03>Generic Machine Name (NetBIOS name)
    MACHINENAME<20>LanMan Server service is running on MACHINENAME
    WORKGROUP<1b>Domain Master Browser

    Table 26.2. Group Names

    WORKGROUP<03>Generic Name registered by all members of WORKGROUP
    WORKGROUP<1c>Domain Controllers / Netlogon Servers
    WORKGROUP<1d>Local Master Browsers
    WORKGROUP<1e>Internet Name Resolvers

    + It should be noted that all NetBIOS machines register their own names as per the above. This is in vast contrast to TCP/IP installations where traditionally the system administrator will -determine in the /etc/hosts or in the DNS database what names +determine in the /etc/hosts or in the DNS database what names are associated with each IP address. -

    -One further point of clarification should be noted, the /etc/hosts +

    + +One further point of clarification should be noted. The /etc/hosts file and the DNS records do not provide the NetBIOS name type information that MS Windows clients depend on to locate the type of service that may be needed. An example of this is what happens when an MS Windows client @@ -191,38 +198,38 @@ address of a server that provides it by performing a lookup (via a NetBIOS broadcast) for enumeration of all machines that have registered the name type *<1c>. A logon request is then sent to each IP address that is returned in the enumerated list of IP addresses. -Whichever machine first replies then ends up providing the logon services. +Whichever machine first replies, it then ends up providing the logon services.

    -The name "workgroup" or "domain" really can be confusing since these +The name “workgroup” or “domain” really can be confusing since these have the added significance of indicating what is the security -architecture of the MS Windows network. The term "workgroup" indicates +architecture of the MS Windows network. The term “workgroup” indicates that the primary nature of the network environment is that of a -peer-to-peer design. In a WORKGROUP all machines are responsible for -their own security, and generally such security is limited to use of -just a password (known as SHARE MODE security). In most situations -with peer-to-peer networking the users who control their own machines +peer-to-peer design. In a WORKGROUP, all machines are responsible for +their own security, and generally such security is limited to the use of +just a password (known as Share Level security). In most situations +with peer-to-peer networking, the users who control their own machines will simply opt to have no security at all. It is possible to have -USER MODE security in a WORKGROUP environment, thus requiring use +User Level Security in a WORKGROUP environment, thus requiring the use of a user name and a matching password.

    MS Windows networking is thus predetermined to use machine names for all local and remote machine message passing. The protocol used is called Server Message Block (SMB) and this is implemented using the NetBIOS protocol (Network Basic Input Output System). NetBIOS can -be encapsulated using LLC (Logical Link Control) protocol - in which case +be encapsulated using LLC (Logical Link Control) protocol in which case the resulting protocol is called NetBEUI (Network Basic Extended User Interface). NetBIOS can also be run over IPX (Internetworking Packet Exchange) protocol as used by Novell NetWare, and it can be run -over TCP/IP protocols - in which case the resulting protocol is called +over TCP/IP protocols in which case the resulting protocol is called NBT or NetBT, the NetBIOS over TCP/IP.

    MS Windows machines use a complex array of name resolution mechanisms. -Since we are primarily concerned with TCP/IP this demonstration is +Since we are primarily concerned with TCP/IP, this demonstration is limited to this area. -

    The NetBIOS Name Cache

    -All MS Windows machines employ an in memory buffer in which is +

    The NetBIOS Name Cache

    +All MS Windows machines employ an in-memory buffer in which is stored the NetBIOS names and IP addresses for all external -machines that that machine has communicated with over the +machines that machine has communicated with over the past 10-15 minutes. It is more efficient to obtain an IP address for a machine from the local cache than it is to go through all the configured name resolution mechanisms. @@ -230,21 +237,23 @@ configured name resolution mechanisms. If a machine whose name is in the local name cache has been shut down before the name had been expired and flushed from the cache, then an attempt to exchange a message with that machine will be subject -to time-out delays. i.e.: Its name is in the cache, so a name resolution -lookup will succeed, but the machine can not respond. This can be -frustrating for users - but it is a characteristic of the protocol. -

    +to time-out delays. Its name is in the cache, so a name resolution +lookup will succeed, but the machine cannot respond. This can be +frustrating for users but is a characteristic of the protocol. +

    + + The MS Windows utility that allows examination of the NetBIOS -name cache is called "nbtstat". The Samba equivalent of this +name cache is called “nbtstat”. The Samba equivalent of this is called nmblookup. -

    The LMHOSTS file

    -This file is usually located in MS Windows NT 4.0 or -2000 in C:\WINNT\SYSTEM32\DRIVERS\ETC and contains -the IP Address and the machine name in matched pairs. The -LMHOSTS file performs NetBIOS name -to IP address mapping. +

    The LMHOSTS File

    + +This file is usually located in MS Windows NT 4.0 or Windows 200x/XP in the directory +C:\WINNT\SYSTEM32\DRIVERS\ETC and contains the IP Address +and the machine name in matched pairs. The LMHOSTS file +performs NetBIOS name to IP address mapping.

    -It typically looks like: +It typically looks like this:

     # Copyright (c) 1998 Microsoft Corp.
     #
    @@ -252,10 +261,10 @@ It typically looks like:
     # over TCP/IP) stack for Windows98
     #
     # This file contains the mappings of IP addresses to NT computernames
    -# (NetBIOS) names.  Each entry should be kept on an individual line.
    +# (NetBIOS) names. Each entry should be kept on an individual line.
     # The IP address should be placed in the first column followed by the
     # corresponding computername. The address and the computername
    -# should be separated by at least one space or tab. The "#" character
    +# should be separated by at least one space or tab. The "#" character
     # is generally used to denote the start of a comment (see the exceptions
     # below).
     #
    @@ -269,29 +278,29 @@ It typically looks like:
     #      #END_ALTERNATE
     #      \0xnn (non-printing character support)
     #
    -# Following any entry in the file with the characters "#PRE" will cause
    +# Following any entry in the file with the characters "#PRE" will cause
     # the entry to be preloaded into the name cache. By default, entries are
     # not preloaded, but are parsed only after dynamic name resolution fails.
     #
    -# Following an entry with the "#DOM:<domain>" tag will associate the
    -# entry with the domain specified by <domain>. This affects how the
    +# Following an entry with the "#DOM:<domain>" tag will associate the
    +# entry with the domain specified by <domain>. This effects how the
     # browser and logon services behave in TCP/IP environments. To preload
     # the host name associated with #DOM entry, it is necessary to also add a
     # #PRE to the line. The <domain> is always preloaded although it will not
     # be shown when the name cache is viewed.
     #
    -# Specifying "#INCLUDE <filename>" will force the RFC NetBIOS (NBT)
    +# Specifying "#INCLUDE <filename>" will force the RFC NetBIOS (NBT)
     # software to seek the specified <filename> and parse it as if it were
     # local. <filename> is generally a UNC-based name, allowing a
     # centralized lmhosts file to be maintained on a server.
     # It is ALWAYS necessary to provide a mapping for the IP address of the
     # server prior to the #INCLUDE. This mapping must use the #PRE directive.
    -# In addition the share "public" in the example below must be in the
    -# LanManServer list of "NullSessionShares" in order for client machines to
    +# In addition the share "public" in the example below must be in the
    +# LanManServer list of "NullSessionShares" in order for client machines to
     # be able to read the lmhosts file successfully. This key is under
     # \machine\system\currentcontrolset\services\lanmanserver\
     # parameters\nullsessionshares
    -# in the registry. Simply add "public" to the list found there.
    +# in the registry. Simply add "public" to the list found there.
     #
     # The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
     # statements to be grouped together. Any single successful include
    @@ -303,37 +312,38 @@ It typically looks like:
     #
     # The following example illustrates all of these extensions:
     #
    -# 102.54.94.97     rhino         #PRE #DOM:networking  #net group's DC
    -# 102.54.94.102    "appname  \0x14"                    #special app server
    -# 102.54.94.123    popular            #PRE             #source server
    -# 102.54.94.117    localsrv           #PRE             #needed for the include
    +# 102.54.94.97     rhino     #PRE #DOM:networking  #net group's DC
    +# 102.54.94.102    "appname  \0x14"       #special app server
    +# 102.54.94.123    popular   #PRE         #source server
    +# 102.54.94.117    localsrv  #PRE         #needed for the include
     #
     # #BEGIN_ALTERNATE
     # #INCLUDE \\localsrv\public\lmhosts
     # #INCLUDE \\rhino\public\lmhosts
     # #END_ALTERNATE
     #
    -# In the above example, the "appname" server contains a special
    -# character in its name, the "popular" and "localsrv" server names are
    -# preloaded, and the "rhino" server name is specified so it can be used
    -# to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"
    +# In the above example, the "appname" server contains a special
    +# character in its name, the "popular" and "localsrv" server names are
    +# preloaded, and the "rhino" server name is specified so it can be used
    +# to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"
     # system is unavailable.
     #
     # Note that the whole file is parsed including comments on each lookup,
     # so keeping the number of comments to a minimum will improve performance.
     # Therefore it is not advisable to simply add lmhosts file entries onto the
     # end of this file.
    -

    HOSTS file

    -This file is usually located in MS Windows NT 4.0 or 2000 in -C:\WINNT\SYSTEM32\DRIVERS\ETC and contains +

    HOSTS File

    +This file is usually located in MS Windows NT 4.0 or Windows 200x/XP in +the directory C:\WINNT\SYSTEM32\DRIVERS\ETC and contains the IP Address and the IP hostname in matched pairs. It can be used by the name resolution infrastructure in MS Windows, depending on how the TCP/IP environment is configured. This file is in every way the equivalent of the UNIX/Linux /etc/hosts file. -

    DNS Lookup

    +

    DNS Lookup

    + This capability is configured in the TCP/IP setup area in the network configuration facility. If enabled, an elaborate name resolution sequence -is followed the precise nature of which is dependant on how the NetBIOS +is followed, the precise nature of which is dependant on how the NetBIOS Node Type parameter is configured. A Node Type of 0 means that NetBIOS broadcast (over UDP broadcast) is used if the name that is the subject of a name lookup is not found in the NetBIOS name @@ -341,46 +351,48 @@ cache. If that fails then DNS, HOSTS and LMHOSTS are checked. If set to Node Type 8, then a NetBIOS Unicast (over UDP Unicast) is sent to the WINS Server to obtain a lookup before DNS, HOSTS, LMHOSTS, or broadcast lookup is used. -

    WINS Lookup

    +

    WINS Lookup

    + A WINS (Windows Internet Name Server) service is the equivalent of the rfc1001/1002 specified NBNS (NetBIOS Name Server). A WINS server stores the names and IP addresses that are registered by a Windows client if the TCP/IP setup has been given at least one WINS Server IP Address.

    -To configure Samba to be a WINS server the following parameter needs +To configure Samba to be a WINS server, the following parameter needs to be added to the smb.conf file:

    wins support = Yes

    -To configure Samba to use a WINS server the following parameters are +To configure Samba to use a WINS server, the following parameters are needed in the smb.conf file:

    wins support = No
    wins server = xxx.xxx.xxx.xxx

    where xxx.xxx.xxx.xxx is the IP address of the WINS server.

    For information about setting up Samba as a WINS server, read - the chapter on network browsing.

    Common Errors

    +.

    Common Errors

    TCP/IP network configuration problems find every network administrator sooner or later. The cause can be anything from keyboard mishaps, forgetfulness, simple mistakes, and -carelessness. Of course, no one is every deliberately careless! -

    Pinging works only in one way

    - “I can ping my samba server from Windows, but I can - not ping my Windows machine from the samba server.” +carelessness. Of course, no one is ever deliberately careless! +

    Pinging Works Only in One Way

    + “I can ping my Samba server from Windows, but I cannot ping my Windows + machine from the Samba server.

    - The Windows machine was at IP Address 192.168.1.2 with netmask 255.255.255.0, the + Answer: The Windows machine was at IP Address 192.168.1.2 with netmask 255.255.255.0, the Samba server (Linux) was at IP Address 192.168.1.130 with netmask 255.255.255.128. The machines were on a local network with no external connections.

    Due to inconsistent netmasks, the Windows machine was on network 192.168.1.0/24, while - the Samba server was on network 192.168.1.128/25 - logically a different network. -

    Very Slow Network Connections

    - A common causes of slow network response includes: -

    • Client is configured to use DNS and DNS server is down

    • Client is configured to use remote DNS server, but remote connection is down

    • Client is configured to use a WINS server, but there is no WINS server

    • Client is NOT configured to use a WINS server, but there is a WINS server

    • Firewall is filtering our DNS or WINS traffic

    Samba server name change problem

    - “The name of the samba server was changed, samba was restarted, samba server can not be + the Samba server was on network 192.168.1.128/25 logically a different network. +

    Very Slow Network Connections

    + A common cause of slow network response includes: +

    • Client is configured to use DNS and the DNS server is down.

    • Client is configured to use remote DNS server, but the + remote connection is down.

    • Client is configured to use a WINS server, but there is no WINS server.

    • Client is not configured to use a WINS server, but there is a WINS server.

    • Firewall is filtering our DNS or WINS traffic.

    Samba Server Name Change Problem

    + “The name of the Samba server was changed, Samba was restarted, Samba server cannot be pinged by new name from MS Windows NT4 Workstation, but it does still respond to ping using the old name. Why?

    - From this description three (3) things are rather obvious: -

    • WINS is NOT in use, only broadcast based name resolution is used

    • The samba server was renamed and restarted within the last 10-15 minutes

    • The old samba server name is still in the NetBIOS name cache on the MS Windows NT4 Workstation

    + From this description, three things are obvious: +

    • WINS is not in use, only broadcast-based name resolution is used.

    • The Samba server was renamed and restarted within the last 10-15 minutes.

    • The old Samba server name is still in the NetBIOS name cache on the MS Windows NT4 Workstation.

    To find what names are present in the NetBIOS name cache on the MS Windows NT4 machine, - open a cmd shell, then: + open a cmd shell and then:

     C:\> nbtstat -n
    @@ -409,7 +421,7 @@ GANDALF	<20>  UNIQUE      192.168.1.1          240
     

    In the above example, GANDALF is the Samba server and FRODO is the MS Windows NT4 Workstation. - The first listing shows the contents of the Local Name Table (i.e.: Identity information on - the MS Windows workstation), the second shows the NetBIOS name in the NetBIOS name cache. + The first listing shows the contents of the Local Name Table (i.e., Identity information on + the MS Windows workstation) and the second shows the NetBIOS name in the NetBIOS name cache. The name cache contains the remote machines known to this workstation. -

    +

    diff --git a/docs/htmldocs/introduction.html b/docs/htmldocs/introduction.html index 10cb806270..16c243214d 100644 --- a/docs/htmldocs/introduction.html +++ b/docs/htmldocs/introduction.html @@ -1,4 +1,3 @@ -Part I. General Installation

    General Installation

    Preparing Samba for Configuration

    This section of the Samba-HOWTO-Collection contains general info on how to install samba +Part I. General Installation

    +PLEASE read this.

    diff --git a/docs/htmldocs/ix01.html b/docs/htmldocs/ix01.html index 6e09e98de4..b428191507 100644 --- a/docs/htmldocs/ix01.html +++ b/docs/htmldocs/ix01.html @@ -1,39 +1,2 @@ -Index

    Index

    L

    ldap admin dn, Configuring Samba
    ldap delete dn, Configuring Samba
    ldap filter, Configuring Samba
    ldap machine suffix, Configuring Samba
    ldap passwd sync, Configuring Samba, Password synchronisation
    ldap ssl, Configuring Samba, Security and sambaSamAccount
    ldap suffix, Configuring Samba
    ldap trust ids, Configuring Samba
    ldap user suffix, Configuring Samba
    libnss_wins.so, /etc/nsswitch.conf
    Links
    hard, MS Windows NTFS Comparison with UNIX File Systems
    soft, MS Windows NTFS Comparison with UNIX File Systems
    Linuxprinting.org, CUPS Print Drivers from Linuxprinting.org
    lm announce, What is Browsing?
    lm interval, What is Browsing?
    LMB (see Local Master Browser)
    LMHOSTS, The LMHOSTS file
    load printers, Parameters Recommended for Use, A little Experiment to warn you, The [global] Section
    local master, What is Browsing?, Setting up WORKGROUP Browsing
    Local Master Browser, Use of the Remote Announce parameter
    locking, Discussion
    locking.tdb, The printing *.tdb Files
    (see also TDB)
    log files
    monitoring, Assumptions
    log level, Adding Machine to Domain Fails, extd_audit, Debug levels
    logon drive, Windows NT4 Workstation
    logon home, LDAP special attributes for sambaSamAccounts, Windows 9x / Me User Profiles, Mixed Windows 9x / Me and Windows NT4/200x User Profiles, Windows NT4 Workstation, Sharing Profiles between W9x/Me and NT4/200x/XP workstations
    logon path, LDAP special attributes for sambaSamAccounts, Mixed Windows 9x / Me and Windows NT4/200x User Profiles, Windows 9x / Me Profile Setup, Windows NT4 Workstation, Sharing Profiles between W9x/Me and NT4/200x/XP workstations
    logon script, LDAP special attributes for sambaSamAccounts
    lpadmin, CUPS Print Drivers from Linuxprinting.org, Setting up Quotas
    lppause command, Parameters Recommended for Use, Linking of smbd with libcups.so, From Windows Clients to a CUPS/Samba Print Server, Pre-conditions
    lpq cache time, Parameters Recommended for Use, The [global] Section
    lpq command, Parameters Recommended for Use, Linking of smbd with libcups.so, Pre-conditions
    lpresume command, Parameters Recommended for Use, Linking of smbd with libcups.so, Pre-conditions
    lprm command, Parameters Recommended for Use, Linking of smbd with libcups.so, Pre-conditions
    lpstat, Troubleshooting revisited

    P

    page_log, The page_log File Syntax
    passdb backend, MS Windows Workstation/Server Machine Trust Accounts, Account Information Databases, Technical Information, The pdbedit Command, Configuring Samba, Configuring, Users can not logon, auth methods does not work, Passdb Backends and Authentication
    password level, Password checking, The tests, Case handling of passwords, Slow Logins
    password server, Server Security (User Level Security), Security Mode and Master Browsers, Joining an NT4 type Domain with Samba-3, The tests
    patch, Patches
    path, "The network name cannot be found", The [printers] Section, Any [my_printer_name] Section, Print Commands, Creating the [print$] Share, Parameters in the [print$] Section, Subdirectory Structure in [print$], Samba receiving Jobfiles and passing them to CUPS, Auto-Deletion or Preservation of CUPS Spool Files, Permissions on -/var/spool/samba/ get reset after each -reboot, The tests
    PCL, GDI on Windows -- PostScript on UNIX, UNIX Printfile Conversion and GUI Basics, Driver Execution on the Server, Network PostScript RIP: CUPS Filters on Server -- clients use -PostScript Driver with CUPS-PPDs
    PDF, Windows Drivers, GDI and EMF, PostScript Printer Description (PPD) Specification
    pdf, MIME type Conversion Rules
    PDL, GDI on Windows -- PostScript on UNIX, PostScript and Ghostscript
    PJL, Network PostScript RIP: CUPS Filters on Server -- clients use -PostScript Driver with CUPS-PPDs, Benefits of using "CUPS PostScript Driver for -Windows NT/2k/XP" instead of Adobe Driver, Adobe and CUPS PostScript Drivers for Windows Clients
    point and print, Driver Installation Methods on Windows Clients, Three familiar Methods for driver upload plus a new one, cupsomatic/Foomatic -- how do they fit into the Picture?, Run "cupsaddsmb" (quiet Mode), Installing the PostScript Driver on a Client, Manual Driver Installation in 15 Steps
    PostScript, Using CUPS/Samba in an advanced Way -- intelligent printing -with PostScript Driver Download, GDI on Windows -- PostScript on UNIX, UNIX Printfile Conversion and GUI Basics, PostScript and Ghostscript, Prefilters, Driver Execution on the Server, Network PostScript RIP: CUPS Filters on Server -- clients use -PostScript Driver with CUPS-PPDs, CUPS: a "Magical Stone"?, CUPS Package of "PostScript Driver for WinNT/2k/XP"
    (see also Ghostscript)
    RIP, PostScript and Ghostscript
    PPD, PostScript and Ghostscript, PostScript Printer Description (PPD) Specification, PostScript Printer Descriptions (PPDs) for non-PS Printers, PPDs for non-PS Printers on UNIX, PPDs for non-PS Printers on Windows, CUPS: a "Magical Stone"?, Installing the PostScript Driver on a Client
    CUPS (see CUPS-PPD)
    preferred master, What is Browsing?, Setting up WORKGROUP Browsing, Forcing Samba to be the master, Making Samba the domain master, The tests
    preserve case, Windows 9x / Me Profile Setup
    print command, Parameters Recommended for Use, The [global] Section, Default Print Commands for various UNIX Print Subsystems, Setting up your own Print Commands, Linking of smbd with libcups.so, From Windows Clients to a CUPS/Samba Print Server, Pre-conditions, Manual Configuration
    print ok , Parameters Recommended for Use
    printable, Parameters Recommended for Use, The [printers] Section, Any [my_printer_name] Section
    printcap, Parameters Recommended for Use, Default Print Commands for various UNIX Print Subsystems, Basic Configuration of CUPS support, Linking of smbd with libcups.so, More complex smb.conf Settings for -CUPS, From Windows Clients to a CUPS/Samba Print Server, Pre-conditions
    printcap name, Parameters Recommended for Use, The [global] Section
    printer, Parameters Recommended for Use
    printer admin, Parameters Recommended for Use, The [global] Section, Any [my_printer_name] Section, Parameters in the [print$] Section, Setting Drivers for existing Printers with a Client GUI, IMPORTANT! Setting Device Modes on new Printers, Always make first Client Connection as root or "printer admin", Setting Default Print Options for the Client Drivers, Adding new Printers with the Windows NT APW, More complex smb.conf Settings for -CUPS, What is required for adddriver and setdriver to succeed, Print options for all users can't be set on Win2K/XP
    printer name, Parameters Recommended for Use
    printing, Parameters Recommended for Use, The [global] Section, Default Print Commands for various UNIX Print Subsystems, Setting up your own Print Commands, Basic Configuration of CUPS support, Linking of smbd with libcups.so, More complex smb.conf Settings for -CUPS, From Windows Clients to a CUPS/Samba Print Server, Pre-conditions, Manual Configuration
    printing.tdb, The printing *.tdb Files
    (see also TDB)
    PrintPro (see ESP Print Pro)
    public, The [printers] Section

    R

    read list, User and Group Based Controls
    read only, Miscellaneous Controls, The [printers] Section, Parameters in the [print$] Section
    read raw, Read raw
    read size, Read size
    remote announce, NetBIOS over TCP/IP, How Browsing Functions, Use of the Remote Announce parameter, Browsing support in Samba
    remote browse sync, NetBIOS over TCP/IP, How Browsing Functions, Use of the Remote Browse Sync parameter
    root preexec, Logon Scripts
    rpcclient
    adddriver, Run "cupsaddsmb" with verbose Output, Understanding cupsaddsmb, Installing PostScript Driver Files manually (using -rpcclient), Understanding the rpcclient man page, What is required for adddriver and setdriver to succeed, Manual Driver Installation in 15 Steps
    enumdrivers, Installing PostScript Driver Files manually (using -rpcclient), Manual Driver Installation in 15 Steps
    enumports, Installing PostScript Driver Files manually (using -rpcclient)
    enumprinters, Installing PostScript Driver Files manually (using -rpcclient), What is required for adddriver and setdriver to succeed, Manual Driver Installation in 15 Steps, Troubleshooting revisited
    getdriver, Producing an Example by querying a Windows Box, Manual Driver Installation in 15 Steps
    getprinter, Producing an Example by querying a Windows Box, Manual Driver Installation in 15 Steps, Troubleshooting revisited
    setdriver, Caveats to be considered, Run "cupsaddsmb" with verbose Output, Understanding cupsaddsmb, Installing PostScript Driver Files manually (using -rpcclient), What is required for adddriver and setdriver to succeed, Manual Driver Installation in 15 Steps
    rsync, Accessing the samba sources via rsync and ftp

    S

    secrets.tdb, The printing *.tdb Files
    (see also TDB)
    security, Samba Security Modes, Domain Security Mode (User Level Security), Server Security (User Level Security), What makes Samba a SERVER?, What makes Samba a Domain Controller?, What makes Samba a Domain Member?, Constantly Losing Connections to Password Server, Preparing for Domain Control, Security Mode and Master Browsers, Joining an NT4 type Domain with Samba-3, Why is this better than security = server?, Setup your smb.conf, Run "cupsaddsmb" (quiet Mode), "cupsaddsmb" keeps asking for root password in - neverending loop, Passdb Backends and Authentication, The tests, Configuring WfW password handling
    security mask, File and Directory Permissions Based Controls, Interaction with the standard Samba create mask - parameters
    Server Manager, MS Windows Workstation/Server Machine Trust Accounts, Manual Creation of Machine Trust Accounts
    sessionid.tdb, The printing *.tdb Files
    (see also TDB)
    share_info.tdb, The printing *.tdb Files
    (see also TDB)
    short preserve case, Miscellaneous Controls, Windows 9x / Me Profile Setup
    Short-Cuts, MS Windows NTFS Comparison with UNIX File Systems
    show add printer wizard, Parameters Recommended for Use, The [global] Section, Adding new Printers with the Windows NT APW
    SID, Features and Benefits
    Single Sign On, Caveats to be considered
    smbclient, Testing with smbclient, The tests
    socket options, Socket options
    spooling
    central, Central spooling vs. "Peer-to-Peer" printing
    peer-to-peer, Central spooling vs. "Peer-to-Peer" printing
    spooling-only, CUPS/Samba as a "spooling-only" Print Server; "raw" printing -with Vendor Drivers on Windows Clients
    strict locking, Discussion
    +Index

    Index

    D

    daemon, Alternative: Starting smbd as a Daemon
    DDK, PostScript Drivers with No Major Problems Even in Kernel +Mode, CUPS PostScript Driver for Windows NT/200x/XP
    debug, Internal Errors
    debug level, Debugging with Samba Itself, Log Level
    debuglevel, Debug Levels
    default case, Miscellaneous Controls
    default profile, Default Profile for Windows Users, Changing the Default Profile
    delete printer command, Adding New Printers with the Windows NT APW
    delete roaming profiles, MS Windows 200x/XP
    DHCP, Background Information
    diff, Patches
    directory mask, File and Directory Permissions-Based Controls
    directory security mask, Interaction with the Standard Samba create mask Parameters
    Directory Separators, MS Windows NTFS Comparison with UNIX File Systems
    display charset, Samba and Charsets, Enabling SWAT Internationalization Support
    DNS, TCP/IP without NetBIOS, DNS Lookup
    Active Directory, DNS and Active Directory
    Dynamic, Background Information
    dns proxy, What Is Browsing?
    domain admin group, Group Mapping MS Windows and UNIX
    Domain Admins group, Discussion
    domain logons, Preparing for Domain Control
    domain master, Domain Network Logon Service, Example Configuration, What Is Browsing?, Making Samba the Domain Master
    Domain Member, Domain Security Mode (User Level Security)
    joining, Example Configuration
    domain security, Features and Benefits
    Domain Users group, Adding Domain Users to the Power Users Group
    dont descend, Miscellaneous Controls
    dos charset, Samba and Charsets, Japanese Charsets, CP850.so Can't Be Found
    dos filemode, File and Directory Permissions-Based Controls
    dos filetime resolution, Miscellaneous Controls
    dos filetimes, Miscellaneous Controls
    Drive Identification, MS Windows NTFS Comparison with UNIX File Systems

    F

    fake oplocks, Miscellaneous Controls
    File Naming Conventions, MS Windows NTFS Comparison with UNIX File Systems
    File System, MS Windows NTFS Comparison with UNIX File Systems
    case sensitivity, MS Windows NTFS Comparison with UNIX File Systems
    feature comparison, MS Windows NTFS Comparison with UNIX File Systems
    UNIX, MS Windows NTFS Comparison with UNIX File Systems
    Windows, MS Windows NTFS Comparison with UNIX File Systems
    flush name cache, How Can One Flush the Samba NetBIOS Name Cache without Restarting Samba?
    foomatic, Using Windows-Formatted Vendor PPDs, The CUPS Filtering Architecture, The Role of cupsomatic/foomatic, cupsomatic/foomatic-rip Versus native CUPS Printing, foomatic-rip and Foomatic Explained, Foomatic's Strange Name
    foomatic-rip, cupsomatic/foomatic-rip Versus native CUPS Printing, CUPS Print Drivers from Linuxprinting.org, foomatic-rip and Foomatic Explained, The Grand Unification Achieved
    force create mode, File and Directory Permissions-Based Controls, Interaction with the Standard Samba create mask Parameters
    force directory mode, File and Directory Permissions-Based Controls, Interaction with the Standard Samba create mask Parameters
    force directory security mode, File and Directory Permissions-Based Controls, Interaction with the Standard Samba create mask Parameters
    force group, User and Group-Based Controls
    force security mode, File and Directory Permissions-Based Controls, Interaction with the Standard Samba create mask Parameters
    force user, User and Group-Based Controls, File Operations Done as root with force user Set, Beware of Force User
    ftp, Accessing the Samba Sources via rsync and ftp

    L

    ldap admin dn, Backup Domain Controller Configuration, Sharing User ID Mappings between Samba Domain Members, Configuring Samba
    ldap delete dn, Configuring Samba
    ldap filter, Configuring Samba
    ldap group suffix, Configuring Samba
    ldap idmap suffix, Backup Domain Controller Configuration, Sharing User ID Mappings between Samba Domain Members, Configuring Samba
    ldap machine suffix, Configuring Samba
    ldap passwd sync, Configuring Samba, Password Synchronization
    ldap ssl, Configuring Samba, Security and sambaSamAccount
    ldap suffix, Backup Domain Controller Configuration, Configuring Samba
    ldap user suffix, Configuring Samba
    libnss_wins.so, /etc/nsswitch.conf
    Links
    hard, MS Windows NTFS Comparison with UNIX File Systems
    soft, MS Windows NTFS Comparison with UNIX File Systems
    Linuxprinting.org, CUPS Print Drivers from Linuxprinting.org
    lm announce, What Is Browsing?
    lm interval, What Is Browsing?
    LMB (see Local Master Browser)
    LMHOSTS, The LMHOSTS File
    load printers, Rapid Configuration Validation, The [global] Section
    local master, What Is Browsing?, Configuring WORKGROUP Browsing
    Local Master Browser, NetBIOS over TCP/IP, Use of the Remote Announce Parameter
    locking, Discussion
    locking.tdb, The Printing *.tdb Files
    (see also TDB)
    log files
    monitoring, Assumptions
    log level, Adding Machine to Domain Fails, Problem Resolution, extd_audit, Debug Levels
    logon drive, Windows NT4 Workstation
    logon home, LDAP Special Attributes for sambaSamAccounts, Windows 9x/Me User Profiles, Mixed Windows 9x/Me and Windows NT4/200x User Profiles, Disabling Roaming Profile Support, Windows NT4 Workstation, Sharing Profiles between W9x/Me and NT4/200x/XP Workstations
    logon path, LDAP Special Attributes for sambaSamAccounts, Mixed Windows 9x/Me and Windows NT4/200x User Profiles, Disabling Roaming Profile Support, Windows 9x/Me Profile Setup, Windows NT4 Workstation, Sharing Profiles between W9x/Me and NT4/200x/XP Workstations
    logon script, LDAP Special Attributes for sambaSamAccounts
    lpadmin, CUPS Print Drivers from Linuxprinting.org, Setting Up Quotas
    lppause command, Linking smbd with libcups.so, From Windows Clients to a CUPS/Samba Print Server, Pre-Conditions
    lpq cache time, The [global] Section
    lpq command, Linking smbd with libcups.so, Pre-Conditions
    lpresume command, Linking smbd with libcups.so, Pre-Conditions
    lprm command, Linking smbd with libcups.so, Pre-Conditions
    lpstat, Troubleshooting Revisited

    P

    page_log, The page_log File Syntax
    passdb backend, MS Windows Workstation/Server Machine Trust Accounts, Account Information Databases, Technical Information, The pdbedit Command, Configuring Samba, Configuring, Users Cannot Logon, Configuration of auth methods, Remote CIFS Authentication Using winbindd.so, Quick Migration Guide, Passdb Backends and Authentication
    password level, Password Checking, The Tests, Password Case Sensitivity, Slow Logins
    password server, Server Security (User Level Security), Security Mode and Master Browsers, Joining an NT4-type Domain with Samba-3, Configure smb.conf, The Tests
    patch, Patches
    path, The [printers] Section, Any [my_printer_name] Section, Print Commands, Creating the [print$] Share, [print$] Section Parameters, The [print$] Share Directory, Samba Receiving Jobfiles and Passing Them to CUPS, Auto-Deletion or Preservation of CUPS Spool Files, Permissions on /var/spool/samba/ Get Reset After Each Reboot, The Tests
    PCL, GDI on Windows -- PostScript on UNIX, Windows Drivers, GDI and EMF, UNIX Printfile Conversion and GUI Basics, Driver Execution on the Server, Network PostScript RIP
    pdbedit, New Backends, Account Management Tools, The pdbedit Command, XML, Passdb Backends and Authentication, Steps in Migration Process, Samba-3 Implementation Choices
    PDF, Windows Drivers, GDI and EMF, PostScript Printer Description (PPD) Specification
    pdf, MIME Type Conversion Rules
    PDL, GDI on Windows -- PostScript on UNIX, PostScript and Ghostscript
    permissions
    file/directory ACLs, Managing UNIX Permissions Using NT Security Dialogs
    share, Share Definition Access Controls
    share ACLs, Access Controls on Shares
    UNIX file and directory, Features and Benefits
    PGP, Verifying Samba's PGP Signature
    PJL, Network PostScript RIP, Windows CUPS PostScript Driver Versus Adobe Driver, Adobe and CUPS PostScript Drivers for Windows Clients
    point 'n' print, Installation of Windows Client Drivers, Driver Upload Methods, The Role of cupsomatic/foomatic, Run cupsaddsmb (Quiet Mode), Installing the PostScript Driver on a Client, Manual Driver Installation in 15 Steps
    PostScript, Advanced Intelligent Printing with PostScript Driver Download, GDI on Windows -- PostScript on UNIX, Windows Drivers, GDI and EMF, UNIX Printfile Conversion and GUI Basics, PostScript and Ghostscript, Prefilters, Driver Execution on the Server, Network PostScript RIP, CUPS: A Magical Stone?, CUPS PostScript Driver for Windows NT/200x/XP
    (see also Ghostscript)
    RIP, PostScript and Ghostscript
    PPD, PostScript and Ghostscript, PostScript Printer Description (PPD) Specification, PostScript Printer Descriptions (PPDs) for Non-PS Printers, PPDs for Non-PS Printers on UNIX, PPDs for Non-PS Printers on Windows, CUPS: A Magical Stone?, Installing the PostScript Driver on a Client
    CUPS (see CUPS-PPD)
    preferred master, What Is Browsing?, Configuring WORKGROUP Browsing, Forcing Samba to Be the Master, Making Samba the Domain Master, The Tests
    preserve case, Windows 9x/Me Profile Setup
    print command, The [global] Section, Default UNIX System Printing Commands, Custom Print Commands, Linking smbd with libcups.so, From Windows Clients to a CUPS/Samba Print Server, Pre-Conditions, Manual Configuration
    printable, The [printers] Section, Any [my_printer_name] Section
    printcap, Default UNIX System Printing Commands, Basic CUPS Support Configuration, Linking smbd with libcups.so, More Complex CUPS smb.conf Settings, Pre-Conditions
    printcap name, The [global] Section
    printer admin, The [global] Section, Any [my_printer_name] Section, [print$] Section Parameters, Add Printer Wizard Driver Installation, First Client Driver Installation, Setting Device Modes on New Printers, Always Make First Client Connection as root or printer admin, Setting Default Print Options for Client Drivers, Adding New Printers with the Windows NT APW, More Complex CUPS smb.conf Settings, Requirements for adddriver and setdriver to Succeed, Print Options for All Users Can't Be Set on Windows 200x/XP
    printing, The [global] Section, Default UNIX System Printing Commands, Custom Print Commands, Basic CUPS Support Configuration, Linking smbd with libcups.so, More Complex CUPS smb.conf Settings, From Windows Clients to a CUPS/Samba Print Server, Pre-Conditions, Manual Configuration
    printing.tdb, The Printing *.tdb Files
    (see also TDB)
    PrintPro (see ESP Print Pro)
    public, The [printers] Section

    Q

    queue resume command, Linking smbd with libcups.so
    queuepause command, Linking smbd with libcups.so

    R

    raw printing, Central Print Serving, Explicitly Enable raw Printing for application/octet-stream
    read list, User and Group-Based Controls
    read only, Miscellaneous Controls, The [printers] Section, [print$] Section Parameters
    read raw, Read Raw
    read size, Read Size
    Relative Identifier (see RID)
    remote announce, NetBIOS over TCP/IP, How Browsing Functions, Use of the Remote Announce Parameter, Browsing Support in Samba
    remote browse sync, NetBIOS over TCP/IP, How Browsing Functions, Use of the Remote Browse Sync Parameter
    replication, Features and Benefits
    browse lists, Cross-Subnet Browsing
    SAM, Domain Controller Types, Features and Benefits, MS Windows NT4-style Domain Control, Backup Domain Controller Configuration, Can Samba Be a Backup Domain Controller to an NT4 PDC?, How Do I Replicate the smbpasswd File?
    WINS, NetBIOS over TCP/IP, WINS Server Configuration, WINS Replication
    RID, Default Users, Groups and Relative Identifiers
    roaming profiles, Disabling Roaming Profile Support
    root preexec, Logon Scripts
    rpcclient
    adddriver, Run cupsaddsmb with Verbose Output, Understanding cupsaddsmb, Installing PostScript Driver Files Manually Using rpcclient, Understanding the rpcclient man Page, Requirements for adddriver and setdriver to Succeed, Manual Driver Installation in 15 Steps
    enumdrivers, Installing PostScript Driver Files Manually Using rpcclient, Manual Driver Installation in 15 Steps
    enumports, Installing PostScript Driver Files Manually Using rpcclient
    enumprinters, Installing PostScript Driver Files Manually Using rpcclient, Requirements for adddriver and setdriver to Succeed, Manual Driver Installation in 15 Steps, Troubleshooting Revisited
    getdriver, Producing an Example by Querying a Windows Box, Manual Driver Installation in 15 Steps
    getprinter, Producing an Example by Querying a Windows Box, Manual Driver Installation in 15 Steps, Troubleshooting Revisited
    setdriver, Caveats to be Considered, Run cupsaddsmb with Verbose Output, Understanding cupsaddsmb, Installing PostScript Driver Files Manually Using rpcclient, Requirements for adddriver and setdriver to Succeed, Manual Driver Installation in 15 Steps
    rsync, Accessing the Samba Sources via rsync and ftp
    rundll32, Adding Printers without User Intervention

    S

    SAM, Features and Benefits, Domain Controller Types, Features and Benefits, Result Caching
    SAM backend
    LDAP, Features and Benefits
    ldapsam, Features and Benefits, Features and Benefits, Mapping Common UIDs/GIDs on Distributed Machines, ldapsam
    ldapsam_compat, Features and Benefits
    mysqlsam, Features and Benefits, MySQL
    non-LDAP, Features and Benefits
    smbpasswd, Features and Benefits, smbpasswd Encrypted Password Database
    tdbsam, Features and Benefits, Features and Benefits, tdbsam
    xmlsam, Features and Benefits, Mapping Common UIDs/GIDs on Distributed Machines, XML
    schannel, Cannot Log onto Domain Member Workstation After Joining Domain
    secrets.tdb, The Printing *.tdb Files
    (see also TDB)
    security, Samba Security Modes, Domain Security Mode (User Level Security), Server Security (User Level Security), What Makes Samba a Server?, What Makes Samba a Domain Controller?, What Makes Samba a Domain Member?, Constantly Losing Connections to Password Server, Preparing for Domain Control, Security Mode and Master Browsers, Joining an NT4-type Domain with Samba-3, Why Is This Better Than security = server?, Configure smb.conf, Run cupsaddsmb (Quiet Mode), cupsaddsmb Keeps Asking for Root Password in Never-ending Loop, Passdb Backends and Authentication, The Tests, Configuring Windows for Workgroups Password Handling
    security mask, File and Directory Permissions-Based Controls, Interaction with the Standard Samba create mask Parameters
    Security Mode, Samba Security Modes
    Server Manager, MS Windows Workstation/Server Machine Trust Accounts, Manual Creation of Machine Trust Accounts, Remote Server Administration
    Server Type, Server Types
    Domain Member, Example Configuration, Example Configuration, Features and Benefits
    sessionid.tdb, The Printing *.tdb Files
    (see also TDB)
    share_info.tdb, The Printing *.tdb Files
    (see also TDB)
    short preserve case, Miscellaneous Controls, Windows 9x/Me Profile Setup
    Short-Cuts, MS Windows NTFS Comparison with UNIX File Systems
    show add printer wizard, The [global] Section, Adding New Printers with the Windows NT APW
    SID, Features and Benefits, The System Cannot Log You On (C000019B), Backup Domain Controller Configuration, Technical Information, Features and Benefits, Side Bar Notes, Get SID, Profile Migration/Creation
    signing, Cannot Log onto Domain Member Workstation After Joining Domain
    simple configuration, Example Configuration
    Single Sign On, Caveats to be Considered
    slow browsing, Browsing of Shares and Directories is Very Slow
    smbclient, Testing with smbclient, The Tests
    smbgrpadd.sh, Sample smb.conf Add Group Script
    socket options, Socket Options
    spooling
    central, Central Spooling vs. Peer-to-Peer Printing
    peer-to-peer, Central Spooling vs. Peer-to-Peer Printing
    spooling-only, Raw Print Serving Vendor Drivers on Windows Clients
    SRVTOOLS.EXE, Managing Domain Machine Accounts using NT4 Server Manager, Remote Server Administration
    strict locking, Discussion
    swat, SWAT
    enable, Enabling SWAT for Use
    security, Securing SWAT through SSL
    System Policy Editor, Creating and Managing System Policies, Administration of Windows 200x/XP Policies
    diff --git a/docs/htmldocs/lmhosts.5.html b/docs/htmldocs/lmhosts.5.html index f0a1d02172..d5f68fd6e5 100644 --- a/docs/htmldocs/lmhosts.5.html +++ b/docs/htmldocs/lmhosts.5.html @@ -30,8 +30,8 @@ to the way the Linux kernel is developed.

    The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another excellent piece of Open Source software, available at - - ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 + + ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 was done by Alexander Bokovoy.

    diff --git a/docs/htmldocs/locking.html b/docs/htmldocs/locking.html index 07228df19d..5210c015c0 100644 --- a/docs/htmldocs/locking.html +++ b/docs/htmldocs/locking.html @@ -1,97 +1,98 @@ -Chapter 14. File and Record Locking

    Chapter 14. File and Record Locking

    Jeremy Allison

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Eric Roseme

    HP Oplocks Usage Recommendations Whitepaper

    -One area which causes trouble for many network administrators is locking. -The extent of the problem is readily evident from searches over the internet. -

    Features and Benefits

    +Chapter 14. File and Record Locking

    Chapter 14. File and Record Locking

    Jeremy Allison

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Eric Roseme

    HP Oplocks Usage Recommendations Whitepaper

    +One area that causes trouble for many network administrators is locking. +The extent of the problem is readily evident from searches over the Internet. +

    Features and Benefits

    Samba provides all the same locking semantics that MS Windows clients expect -and that MS Windows NT4 / 200x servers provide also. +and that MS Windows NT4/200x servers also provide.

    The term locking has exceptionally broad meaning and covers a range of functions that are all categorized under this one term.

    Opportunistic locking is a desirable feature when it can enhance the -perceived performance of applications on a networked client. However, the -opportunistic locking protocol is not robust, and therefore can -encounter problems when invoked beyond a simplistic configuration, or -on extended, slow, or faulty networks. In these cases, operating +perceived performance of applications on a networked client. However, the +opportunistic locking protocol is not robust and, therefore, can +encounter problems when invoked beyond a simplistic configuration or +on extended slow or faulty networks. In these cases, operating system management of opportunistic locking and/or recovering from repetitive errors can offset the perceived performance advantage that it is intended to provide.

    The MS Windows network administrator needs to be aware that file and record -locking semantics (behaviour) can be controlled either in Samba or by way of registry +locking semantics (behavior) can be controlled either in Samba or by way of registry settings on the MS Windows client.

    Note

    -Sometimes it is necessary to disable locking control settings BOTH on the Samba +Sometimes it is necessary to disable locking control settings on both the Samba server as well as on each MS Windows client! -

    Discussion

    -There are two types of locking which need to be performed by a SMB server. -The first is record locking which allows a client to lock -a range of bytes in a open file. The second is the deny modes +

    Discussion

    +There are two types of locking that need to be performed by an SMB server. +The first is record locking that allows a client to lock +a range of bytes in a open file. The second is the deny modes that are specified when a file is open.

    Record locking semantics under UNIX are very different from record locking under -Windows. Versions of Samba before 2.2 have tried to use the native fcntl() unix +Windows. Versions of Samba before 2.2 have tried to use the native fcntl() UNIX system call to implement proper record locking between different Samba clients. -This can not be fully correct due to several reasons. The simplest is the fact +This cannot be fully correct for several reasons. The simplest is the fact that a Windows client is allowed to lock a byte range up to 2^32 or 2^64, -depending on the client OS. The unix locking only supports byte ranges up to 2^31. +depending on the client OS. The UNIX locking only supports byte ranges up to 2^31. So it is not possible to correctly satisfy a lock request above 2^31. There are many more differences, too many to be listed here.

    Samba 2.2 and above implements record locking completely independent of the -underlying unix system. If a byte range lock that the client requests happens -to fall into the range 0-2^31, Samba hands this request down to the UNIX system. -All other locks can not be seen by unix anyway. -

    -Strictly an SMB server should check for locks before every read and write call on -a file. Unfortunately with the way fcntl() works this can be slow and may over-stress -the rpc.lockd. It is also almost always unnecessary as clients are supposed to -independently make locking calls before reads and writes anyway if locking is -important to them. By default Samba only makes locking calls when explicitly asked -to by a client, but if you set strict locking = yes then it -will make lock checking calls on every read and write. -

    -You can also disable byte range locking completely using locking = no. -This is useful for those shares that don't support locking or don't need it -(such as cdroms). In this case Samba fakes the return codes of locking calls to -tell clients that everything is OK. +underlying UNIX system. If a byte range lock that the client requests happens +to fall into the range of 0-2^31, Samba hands this request down to the UNIX system. +All other locks cannot be seen by UNIX, anyway. +

    +Strictly speaking, an SMB server should check for locks before every read and write call on +a file. Unfortunately with the way fcntl() works, this can be slow and may overstress +the rpc.lockd. This is almost always unnecessary as clients are supposed to +independently make locking calls before reads and writes if locking is +important to them. By default, Samba only makes locking calls when explicitly asked +to by a client, but if you set strict locking = yes, it +will make lock checking calls on every read and write call. +

    +You can also disable byte range locking completely by using +locking = no. +This is useful for those shares that do not support locking or do not need it +(such as CDROMs). In this case, Samba fakes the return codes of locking calls to +tell clients that everything is okay.

    The second class of locking is the deny modes. These are set by an application when it opens a file to determine what types of access should be allowed simultaneously with its open. A client may ask for DENY_NONE, DENY_READ, -DENY_WRITE or DENY_ALL. There are also special compatibility +DENY_WRITE, or DENY_ALL. There are also special compatibility modes called DENY_FCB and DENY_DOS. -

    Opportunistic Locking Overview

    +

    Opportunistic Locking Overview

    Opportunistic locking (Oplocks) is invoked by the Windows file system -(as opposed to an API) via registry entries (on the server AND client) +(as opposed to an API) via registry entries (on the server and the client) for the purpose of enhancing network performance when accessing a file residing on a server. Performance is enhanced by caching the file -locally on the client which allows: +locally on the client that allows:

    Read-ahead:

    - The client reads the local copy of the file, eliminating network latency + The client reads the local copy of the file, eliminating network latency.

    Write caching:

    - The client writes to the local copy of the file, eliminating network latency + The client writes to the local copy of the file, eliminating network latency.

    Lock caching:

    - The client caches application locks locally, eliminating network latency + The client caches application locks locally, eliminating network latency.

    The performance enhancement of oplocks is due to the opportunity of -exclusive access to the file - even if it is opened with deny-none - +exclusive access to the file even if it is opened with deny-none because Windows monitors the file's status for concurrent access from other processes. -

    Windows defines 4 kinds of Oplocks:

    Level1 Oplock:

    +

    Windows defines 4 kinds of Oplocks:

    Level1 Oplock

    The redirector sees that the file was opened with deny none (allowing concurrent access), verifies that no other process is accessing the file, checks that oplocks are enabled, then grants deny-all/read-write/exclusive - access to the file. The client now performs + access to the file. The client now performs operations on the cached local file.

    If a second process attempts to open the file, the open - is deferred while the redirector "breaks" the original - oplock. The oplock break signals the caching client to + is deferred while the redirector “breaks” the original + oplock. The oplock break signals the caching client to write the local file back to the server, flush the - local locks, and discard read-ahead data. The break is + local locks and discard read-ahead data. The break is then complete, the deferred open is granted, and the multiple processes can enjoy concurrent file access as dictated by mandatory or byte-range locking options. @@ -99,130 +100,130 @@ other processes. file with a share mode other than deny-none, then the second process is granted limited or no access, despite the oplock break. -

    Level2 Oplock:

    - Performs like a level1 oplock, except caching is only +

    Level2 Oplock

    + Performs like a Level1 oplock, except caching is only operative for reads. All other operations are performed on the server disk copy of the file. -

    Filter Oplock:

    - Does not allow write or delete file access -

    Batch Oplock:

    - Manipulates file openings and closings - allows caching - of file attributes +

    Filter Oplock

    + Does not allow write or delete file access. +

    Batch Oplock

    + Manipulates file openings and closings and allows caching + of file attributes.

    An important detail is that oplocks are invoked by the file system, not -an application API. Therefore, an application can close an oplocked -file, but the file system does not relinquish the oplock. When the +an application API. Therefore, an application can close an oplocked +file, but the file system does not relinquish the oplock. When the oplock break is issued, the file system then simply closes the file in preparation for the subsequent open by the second process.

    -Opportunistic Locking is actually an improper name for this feature. +Opportunistic locking is actually an improper name for this feature. The true benefit of this feature is client-side data caching, and oplocks is merely a notification mechanism for writing data back to the -networked storage disk. The limitation of opportunistic locking is the +networked storage disk. The limitation of opportunistic locking is the reliability of the mechanism to process an oplock break (notification) -between the server and the caching client. If this exchange is faulty -(usually due to timing out for any number of reasons) then the +between the server and the caching client. If this exchange is faulty +(usually due to timing out for any number of reasons), then the client-side caching benefit is negated.

    The actual decision that a user or administrator should consider is -whether it is sensible to share amongst multiple users data that will -be cached locally on a client. In many cases the answer is no. +whether it is sensible to share among multiple users data that will +be cached locally on a client. In many cases the answer is no. Deciding when to cache or not cache data is the real question, and thus -"opportunistic locking" should be treated as a toggle for client-side -caching. Turn it "ON" when client-side caching is desirable and -reliable. Turn it "OFF" when client-side caching is redundant, -unreliable, or counter-productive. +“opportunistic locking” should be treated as a toggle for client-side +caching. Turn it “on” when client-side caching is desirable and +reliable. Turn it “off” when client-side caching is redundant, +unreliable or counter-productive.

    -Opportunistic locking is by default set to "on" by Samba on all +Opportunistic locking is by default set to “on” by Samba on all configured shares, so careful attention should be given to each case to determine if the potential benefit is worth the potential for delays. The following recommendations will help to characterize the environment where opportunistic locking may be effectively configured.

    -Windows Opportunistic Locking is a lightweight performance-enhancing -feature. It is not a robust and reliable protocol. Every -implementation of Opportunistic Locking should be evaluated as a -tradeoff between perceived performance and reliability. Reliability -decreases as each successive rule above is not enforced. Consider a +Windows opportunistic locking is a lightweight performance-enhancing +feature. It is not a robust and reliable protocol. Every +implementation of opportunistic locking should be evaluated as a +tradeoff between perceived performance and reliability. Reliability +decreases as each successive rule above is not enforced. Consider a share with oplocks enabled, over a wide area network, to a client on a South Pacific atoll, on a high-availability server, serving a -mission-critical multi-user corporate database, during a tropical -storm. This configuration will likely encounter problems with oplocks. +mission-critical multi-user corporate database during a tropical +storm. This configuration will likely encounter problems with oplocks.

    Oplocks can be beneficial to perceived client performance when treated -as a configuration toggle for client-side data caching. If the data +as a configuration toggle for client-side data caching. If the data caching is likely to be interrupted, then oplock usage should be -reviewed. Samba enables opportunistic locking by default on all -shares. Careful attention should be given to the client usage of -shared data on the server, the server network reliability, and the +reviewed. Samba enables opportunistic locking by default on all +shares. Careful attention should be given to the client usage of +shared data on the server, the server network reliability and the opportunistic locking configuration of each share. -n mission critical high availability environments, data integrity is -often a priority. Complex and expensive configurations are implemented +In mission critical high availability environments, data integrity is +often a priority. Complex and expensive configurations are implemented to ensure that if a client loses connectivity with a file server, a failover replacement will be available immediately to provide continuous data availability.

    Windows client failover behavior is more at risk of application -interruption than other platforms because it is dependant upon an -established TCP transport connection. If the connection is interrupted -- as in a file server failover - a new session must be established. +interruption than other platforms because it is dependent upon an +established TCP transport connection. If the connection is interrupted + as in a file server failover a new session must be established. It is rare for Windows client applications to be coded to recover -correctly from a transport connection loss, therefore most applications -will experience some sort of interruption - at worst, abort and +correctly from a transport connection loss, therefore, most applications +will experience some sort of interruption at worst, abort and require restarting.

    If a client session has been caching writes and reads locally due to opportunistic locking, it is likely that the data will be lost when the -application restarts, or recovers from the TCP interrupt. When the TCP -connection drops, the client state is lost. When the file server -recovers, an oplock break is not sent to the client. In this case, the -work from the prior session is lost. Observing this scenario with -oplocks disabled, and the client was writing data to the file server -real-time, then the failover will provide the data on disk as it +application restarts or recovers from the TCP interrupt. When the TCP +connection drops, the client state is lost. When the file server +recovers, an oplock break is not sent to the client. In this case, the +work from the prior session is lost. Observing this scenario with +oplocks disabled and with the client writing data to the file server +real-time, the failover will provide the data on disk as it existed at the time of the disconnect.

    -In mission critical high availability environments, careful attention -should be given to opportunistic locking. Ideally, comprehensive +In mission-critical high-availability environments, careful attention +should be given to opportunistic locking. Ideally, comprehensive testing should be done with all affected applications with oplocks enabled and disabled. -

    Exclusively Accessed Shares

    +

    Exclusively Accessed Shares

    Opportunistic locking is most effective when it is confined to shares that are exclusively accessed by a single user, or by only one user at -a time. Because the true value of opportunistic locking is the local +a time. Because the true value of opportunistic locking is the local client caching of data, any operation that interrupts the caching mechanism will cause a delay.

    Home directories are the most obvious examples of where the performance benefit of opportunistic locking can be safely realized. -

    Multiple-Accessed Shares or Files

    +

    Multiple-Accessed Shares or Files

    As each additional user accesses a file in a share with opportunistic locking enabled, the potential for delays and resulting perceived poor -performance increases. When multiple users are accessing a file on a +performance increases. When multiple users are accessing a file on a share that has oplocks enabled, the management impact of sending and -receiving oplock breaks, and the resulting latency while other clients -wait for the caching client to flush data, offset the performance gains +receiving oplock breaks and the resulting latency while other clients +wait for the caching client to flush data offset the performance gains of the caching user.

    As each additional client attempts to access a file with oplocks set, the potential performance improvement is negated and eventually results in a performance bottleneck. -

    UNIX or NFS Client Accessed Files

    +

    UNIX or NFS Client-Accessed Files

    Local UNIX and NFS clients access files without a mandatory -file locking mechanism. Thus, these client platforms are incapable of +file-locking mechanism. Thus, these client platforms are incapable of initiating an oplock break request from the server to a Windows client that has a file cached. Local UNIX or NFS file access can therefore write to a file that has been cached by a Windows client, which exposes the file to likely data corruption.

    If files are shared between Windows clients, and either local UNIX -or NFS users, then turn opportunistic locking off. -

    Slow and/or Unreliable Networks

    +or NFS users, turn opportunistic locking off. +

    Slow and/or Unreliable Networks

    The biggest potential performance improvement for opportunistic locking occurs when the client-side caching of reads and writes delivers the most differential over sending those reads and writes over the wire. This is most likely to occur when the network is extremely slow, -congested, or distributed (as in a WAN). However, network latency also -has a very high impact on the reliability of the oplock break +congested, or distributed (as in a WAN). However, network latency also +has a high impact on the reliability of the oplock break mechanism, and thus increases the likelihood of encountering oplock problems that more than offset the potential perceived performance gain. Of course, if an oplock break never has to be sent, then this is @@ -231,112 +232,112 @@ the most advantageous scenario to utilize opportunistic locking. If the network is slow, unreliable, or a WAN, then do not configure opportunistic locking if there is any chance of multiple users regularly opening the same file. -

    Multi-User Databases

    -Multi-user databases clearly pose a risk due to their very nature - +

    Multi-User Databases

    +Multi-user databases clearly pose a risk due to their very nature they are typically heavily accessed by numerous users at random -intervals. Placing a multi-user database on a share with opportunistic +intervals. Placing a multi-user database on a share with opportunistic locking enabled will likely result in a locking management bottleneck -on the Samba server. Whether the database application is developed +on the Samba server. Whether the database application is developed in-house or a commercially available product, ensure that the share has opportunistic locking disabled. -

    PDM Data Shares

    -Process Data Management (PDM) applications such as IMAN, Enovia, and -Clearcase, are increasing in usage with Windows client platforms, and -therefore SMB data stores. PDM applications manage multi-user -environments for critical data security and access. The typical PDM +

    PDM Data Shares

    +Process Data Management (PDM) applications such as IMAN, Enovia and +Clearcase are increasing in usage with Windows client platforms, and +therefore SMB datastores. PDM applications manage multi-user +environments for critical data security and access. The typical PDM environment is usually associated with sophisticated client design -applications that will load data locally as demanded. In addition, the +applications that will load data locally as demanded. In addition, the PDM application will usually monitor the data-state of each client. In this case, client-side data caching is best left to the local -application and PDM server to negotiate and maintain. It is +application and PDM server to negotiate and maintain. It is appropriate to eliminate the client OS from any caching tasks, and the server from any oplock management, by disabling opportunistic locking on the share. -

    Beware of Force User

    -Samba includes an smb.conf parameter called force user that changes +

    Beware of Force User

    +Samba includes an smb.conf parameter called force user that changes the user accessing a share from the incoming user to whatever user is -defined by the smb.conf variable. If opportunistic locking is enabled +defined by the smb.conf variable. If opportunistic locking is enabled on a share, the change in user access causes an oplock break to be sent -to the client, even if the user has not explicitly loaded a file. In +to the client, even if the user has not explicitly loaded a file. In cases where the network is slow or unreliable, an oplock break can -become lost without the user even accessing a file. This can cause +become lost without the user even accessing a file. This can cause apparent performance degradation as the client continually reconnects to overcome the lost oplock break.

    Avoid the combination of the following:

    • - force user in the smb.conf share configuration. + force user in the smb.conf share configuration.

    • Slow or unreliable networks

    • - Opportunistic Locking Enabled -

    Advanced Samba Opportunistic Locking Parameters

    + Opportunistic locking enabled +

    Advanced Samba Opportunistic Locking Parameters

    Samba provides opportunistic locking parameters that allow the administrator to adjust various properties of the oplock mechanism to -account for timing and usage levels. These parameters provide good +account for timing and usage levels. These parameters provide good versatility for implementing oplocks in environments where they would -likely cause problems. The parameters are: -oplock break wait time, -oplock contention limit. +likely cause problems. The parameters are: +oplock break wait time, +oplock contention limit.

    -For most users, administrators, and environments, if these parameters +For most users, administrators and environments, if these parameters are required, then the better option is to simply turn oplocks off. -The samba SWAT help text for both parameters reads "DO NOT CHANGE THIS -PARAMETER UNLESS YOU HAVE READ AND UNDERSTOOD THE SAMBA OPLOCK CODE." +The Samba SWAT help text for both parameters reads: “Do not change +this parameter unless you have read and understood the Samba oplock code.” This is good advice. -

    Mission Critical High Availability

    -In mission critical high availability environments, data integrity is -often a priority. Complex and expensive configurations are implemented +

    Mission-Critical High-Availability

    +In mission-critical high-availability environments, data integrity is +often a priority. Complex and expensive configurations are implemented to ensure that if a client loses connectivity with a file server, a failover replacement will be available immediately to provide continuous data availability.

    Windows client failover behavior is more at risk of application interruption than other platforms because it is dependant upon an -established TCP transport connection. If the connection is interrupted -- as in a file server failover - a new session must be established. +established TCP transport connection. If the connection is interrupted + as in a file server failover a new session must be established. It is rare for Windows client applications to be coded to recover -correctly from a transport connection loss, therefore most applications -will experience some sort of interruption - at worst, abort and +correctly from a transport connection loss, therefore, most applications +will experience some sort of interruption at worst, abort and require restarting.

    If a client session has been caching writes and reads locally due to opportunistic locking, it is likely that the data will be lost when the application restarts, or recovers from the TCP interrupt. When the TCP -connection drops, the client state is lost. When the file server -recovers, an oplock break is not sent to the client. In this case, the -work from the prior session is lost. Observing this scenario with +connection drops, the client state is lost. When the file server +recovers, an oplock break is not sent to the client. In this case, the +work from the prior session is lost. Observing this scenario with oplocks disabled, and the client was writing data to the file server real-time, then the failover will provide the data on disk as it existed at the time of the disconnect.

    -In mission critical high availability environments, careful attention -should be given to opportunistic locking. Ideally, comprehensive -testing should be done with all affected applications with oplocks +In mission-critical high-availability environments, careful attention +should be given to opportunistic locking. Ideally, comprehensive +testing should be done with all effected applications with oplocks enabled and disabled. -

    Samba Opportunistic Locking Control

    -Opportunistic Locking is a unique Windows file locking feature. It is +

    Samba Opportunistic Locking Control

    +Opportunistic locking is a unique Windows file locking feature. It is not really file locking, but is included in most discussions of Windows file locking, so is considered a de facto locking feature. -Opportunistic Locking is actually part of the Windows client file -caching mechanism. It is not a particularly robust or reliable feature +Opportunistic locking is actually part of the Windows client file +caching mechanism. It is not a particularly robust or reliable feature when implemented on the variety of customized networks that exist in enterprise computing.

    -Like Windows, Samba implements Opportunistic Locking as a server-side -component of the client caching mechanism. Because of the lightweight +Like Windows, Samba implements opportunistic locking as a server-side +component of the client caching mechanism. Because of the lightweight nature of the Windows feature design, effective configuration of -Opportunistic Locking requires a good understanding of its limitations, +opportunistic locking requires a good understanding of its limitations, and then applying that understanding when configuring data access for each particular customized network and client usage state.

    Opportunistic locking essentially means that the client is allowed to download and cache a file on their hard drive while making changes; if a second client wants to access the -file, the first client receives a break and must synchronise the file back to the server. +file, the first client receives a break and must synchronize the file back to the server. This can give significant performance gains in some cases; some programs insist on -synchronising the contents of the entire file back to the server for a single change. +synchronizing the contents of the entire file back to the server for a single change.

    -Level1 Oplocks (aka just plain "oplocks") is another term for opportunistic locking. +Level1 Oplocks (also known as just plain “oplocks”) is another term for opportunistic locking.

    Level2 Oplocks provides opportunistic locking for a file that will be treated as read only. Typically this is used on files that are read-only or @@ -344,16 +345,16 @@ on files that the client has no initial intention to write to at time of opening

    Kernel Oplocks are essentially a method that allows the Linux kernel to co-exist with Samba's oplocked files, although this has provided better integration of MS Windows network -file locking with the under lying OS, SGI IRIX and Linux are the only two OS's that are -oplock aware at this time. +file locking with the underlying OS, SGI IRIX and Linux are the only two OSs that are +oplock-aware at this time.

    Unless your system supports kernel oplocks, you should disable oplocks if you are accessing the same files from both UNIX/Linux and SMB clients. Regardless, oplocks should always be disabled if you are sharing a database file (e.g., Microsoft Access) between -multiple clients, as any break the first client receives will affect synchronisation of +multiple clients, as any break the first client receives will affect synchronization of the entire file (not just the single record), which will result in a noticeable performance impairment and, more likely, problems accessing the database in the first place. Notably, -Microsoft Outlook's personal folders (*.pst) react very badly to oplocks. If in doubt, +Microsoft Outlook's personal folders (*.pst) react quite badly to oplocks. If in doubt, disable oplocks and tune your system from that point.

    If client-side caching is desirable and reliable on your network, you will benefit from @@ -364,14 +365,14 @@ of your client sending oplock breaks and will instead want to disable oplocks fo

    Another factor to consider is the perceived performance of file access. If oplocks provide no measurable speed benefit on your network, it might not be worth the hassle of dealing with them. -

    Example Configuration

    -In the following we examine two distinct aspects of Samba locking controls. -

    Disabling Oplocks

    +

    Example Configuration

    +In the following section we examine two distinct aspects of Samba locking controls. +

    Disabling Oplocks

    You can disable oplocks on a per-share basis with the following:

    [acctdata]
    oplocks = False
    level2 oplocks = False

    -The default oplock type is Level1. Level2 Oplocks are enabled on a per-share basis +The default oplock type is Level1. Level2 oplocks are enabled on a per-share basis in the smb.conf file.

    Alternately, you could disable oplocks on a per-file basis within the share: @@ -379,69 +380,67 @@ Alternately, you could disable oplocks on a per-file basis within the share:

    veto oplock files = /*.mdb/*.MDB/*.dbf/*.DBF/

    If you are experiencing problems with oplocks as apparent from Samba's log entries, -you may want to play it safe and disable oplocks and level2 oplocks. -

    Disabling Kernel OpLocks

    -Kernel OpLocks is an smb.conf parameter that notifies Samba (if +you may want to play it safe and disable oplocks and Level2 oplocks. +

    Disabling Kernel Oplocks

    +Kernel oplocks is an smb.conf parameter that notifies Samba (if the UNIX kernel has the capability to send a Windows client an oplock break) when a UNIX process is attempting to open the file that is -cached. This parameter addresses sharing files between UNIX and -Windows with Oplocks enabled on the Samba server: the UNIX process +cached. This parameter addresses sharing files between UNIX and +Windows with oplocks enabled on the Samba server: the UNIX process can open the file that is Oplocked (cached) by the Windows client and the smbd process will not send an oplock break, which exposes the file -to the risk of data corruption. If the UNIX kernel has the ability to +to the risk of data corruption. If the UNIX kernel has the ability to send an oplock break, then the kernel oplocks parameter enables Samba -to send the oplock break. Kernel oplocks are enabled on a per-server +to send the oplock break. Kernel oplocks are enabled on a per-server basis in the smb.conf file.

    -

    kernel oplocks = yes

    -The default is "no". +

    kernel oplocks = yes

    +The default is no.

    -Veto OpLocks is an smb.conf parameter that identifies specific files for -which Oplocks are disabled. When a Windows client opens a file that +Veto opLocks is an smb.conf parameter that identifies specific files for +which oplocks are disabled. When a Windows client opens a file that has been configured for veto oplocks, the client will not be granted the oplock, and all operations will be executed on the original file on -disk instead of a client-cached file copy. By explicitly identifying -files that are shared with UNIX processes, and disabling oplocks for +disk instead of a client-cached file copy. By explicitly identifying +files that are shared with UNIX processes and disabling oplocks for those files, the server-wide Oplock configuration can be enabled to allow Windows clients to utilize the performance benefit of file -caching without the risk of data corruption. Veto Oplocks can be +caching without the risk of data corruption. Veto Oplocks can be enabled on a per-share basis, or globally for the entire server, in the -smb.conf file: +smb.conf file as shown in .

    -

    Example 14.1. Share with some files oplocked

    [global]
    veto oplock files = /filename.htm/*.txt/
    [share_name]
    veto oplock files = /*.exe/filename.ext/

    +

    Example 14.1. Share with some files oplocked

    [global]
    veto oplock files = /filename.htm/*.txt/
    [share_name]
    veto oplock files = /*.exe/filename.ext/

    - oplock break wait time is an smb.conf parameter that adjusts the time -interval for Samba to reply to an oplock break request. Samba -recommends "DO NOT CHANGE THIS PARAMETER UNLESS YOU HAVE READ AND -UNDERSTOOD THE SAMBA OPLOCK CODE." Oplock Break Wait Time can only be -configured globally in the smb.conf file: +oplock break wait time is an smb.conf parameter +that adjusts the time interval for Samba to reply to an oplock break request. Samba recommends: +“Do not change this parameter unless you have read and understood the Samba oplock code.” +Oplock break Wait Time can only be configured globally in the smb.conf file as shown below.

    oplock break wait time = 0 (default)

    Oplock break contention limit is an smb.conf parameter that limits the response of the Samba server to grant an oplock if the configured -number of contending clients reaches the limit specified by the -parameter. Samba recommends "DO NOT CHANGE THIS PARAMETER UNLESS YOU -HAVE READ AND UNDERSTOOD THE SAMBA OPLOCK CODE." Oplock Break -Contention Limit can be enable on a per-share basis, or globally for -the entire server, in the smb.conf file: -

    -

    Example 14.2. 

    [global]
    oplock break contention limit = 2 (default)
    [share_name]
    oplock break contention limit = 2 (default)

    -

    MS Windows Opportunistic Locking and Caching Controls

    +number of contending clients reaches the limit specified by the parameter. Samba recommends +“Do not change this parameter unless you have read and understood the Samba oplock code.” +Oplock break Contention Limit can be enable on a per-share basis, or globally for +the entire server, in the smb.conf file as shown in . +

    +

    Example 14.2. Configuration with oplock break contention limit

    [global]
    oplock break contention limit = 2 (default)
    [share_name]
    oplock break contention limit = 2 (default)

    +

    MS Windows Opportunistic Locking and Caching Controls

    There is a known issue when running applications (like Norton Anti-Virus) on a Windows 2000/ XP workstation computer that can affect any application attempting to access shared database files across a network. This is a result of a default setting configured in the Windows 2000/XP -operating system known as Opportunistic Locking. When a workstation +operating system known as opportunistic locking. When a workstation attempts to access shared data files located on another Windows 2000/XP computer, the Windows 2000/XP operating system will attempt to increase performance by locking the files and caching information locally. When this occurs, the application is unable to -properly function, which results in an Access Denied +properly function, which results in an “Access Denied” error message being displayed during network operations.

    All Windows operating systems in the NT family that act as database servers for data files (meaning that data files are stored there and accessed by other Windows PCs) may need to have opportunistic locking disabled in order to minimize the risk of data file corruption. -This includes Windows 9x/Me, Windows NT, Windows 200x and Windows XP. +This includes Windows 9x/Me, Windows NT, Windows 200x, and Windows XP.

    If you are using a Windows NT family workstation in place of a server, you must also disable opportunistic locking (oplocks) on that workstation. For example, if you use a @@ -453,7 +452,7 @@ The major difference is the location in the Windows registry where the values fo oplocks are entered. Instead of the LanManServer location, the LanManWorkstation location may be used.

    -You can verify (or change or add, if necessary) this Registry value using the Windows +You can verify (change or add, if necessary) this registry value using the Windows Registry Editor. When you change this registry value, you will have to reboot the PC to ensure that the new setting goes into effect.

    @@ -491,75 +490,75 @@ request opportunistic locks on a remote file. To disable oplocks, the value of The EnableOplocks value configures Windows-based servers (including Workstations sharing files) to allow or deny opportunistic locks on local files.

    -To force closure of open oplocks on close or program exit EnableOpLockForceClose must be set to 1. +To force closure of open oplocks on close or program exit, EnableOpLockForceClose must be set to 1.

    -An illustration of how level II oplocks work: +An illustration of how Level2 oplocks work:

    • - Station 1 opens the file, requesting oplock. + Station 1 opens the file requesting oplock.

    • Since no other station has the file open, the server grants station 1 exclusive oplock.

    • - Station 2 opens the file, requesting oplock. + Station 2 opens the file requesting oplock.

    • - Since station 1 has not yet written to the file, the server asks station 1 to Break - to Level II Oplock. + Since station 1 has not yet written to the file, the server asks station 1 to break + to Level2 oplock.

    • Station 1 complies by flushing locally buffered lock information to the server.

    • - Station 1 informs the server that it has Broken to Level II Oplock (alternatively, + Station 1 informs the server that it has Broken to Level2 Oplock (alternately, station 1 could have closed the file).

    • - The server responds to station 2's open request, granting it level II oplock. - Other stations can likewise open the file and obtain level II oplock. + The server responds to station 2's open request, granting it Level2 oplock. + Other stations can likewise open the file and obtain Level2 oplock.

    • Station 2 (or any station that has the file open) sends a write request SMB. The server returns the write response.

    • - The server asks all stations that have the file open to Break to None, meaning no + The server asks all stations that have the file open to break to none, meaning no station holds any oplock on the file. Because the workstations can have no cached writes or locks at this point, they need not respond to the break-to-none advisory; all they need do is invalidate locally cashed read-ahead data. -

    Workstation Service Entries

    +	

    Workstation Service Entries

     	\HKEY_LOCAL_MACHINE\System\
     		CurrentControlSet\Services\LanmanWorkstation\Parameters
     
     	UseOpportunisticLocking   REG_DWORD   0 or 1
     	Default: 1 (true)
     

    -Indicates whether the redirector should use opportunistic-locking (oplock) performance +This indicates whether the redirector should use opportunistic-locking (oplock) performance enhancement. This parameter should be disabled only to isolate problems. -

    Server Service Entries

    +

    Server Service Entries

     	\HKEY_LOCAL_MACHINE\System\
     		CurrentControlSet\Services\LanmanServer\Parameters
     
     	EnableOplocks   REG_DWORD   0 or 1
     	Default: 1 (true)
     

    -Specifies whether the server allows clients to use oplocks on files. Oplocks are a +This specifies whether the server allows clients to use oplocks on files. Oplocks are a significant performance enhancement, but have the potential to cause lost cached -data on some networks, particularly wide-area networks. +data on some networks, particularly wide area networks.

     	MinLinkThroughput   REG_DWORD   0 to infinite bytes per second
     	Default: 0
     

    -Specifies the minimum link throughput allowed by the server before it disables +This specifies the minimum link throughput allowed by the server before it disables raw and opportunistic locks for this connection.

     	MaxLinkDelay   REG_DWORD   0 to 100,000 seconds
     	Default: 60
     

    -Specifies the maximum time allowed for a link delay. If delays exceed this number, +This specifies the maximum time allowed for a link delay. If delays exceed this number, the server disables raw I/O and opportunistic locking for this connection.

     	OplockBreakWait   REG_DWORD   10 to 180 seconds
     	Default: 35
     

    -Specifies the time that the server waits for a client to respond to an oplock break +This specifies the time that the server waits for a client to respond to an oplock break request. Smaller values can allow detection of crashed clients more quickly but can potentially cause loss of cached data. -

    Persistent Data Corruption

    +

    Persistent Data Corruption

    If you have applied all of the settings discussed in this chapter but data corruption problems -and other symptoms persist, here are some additional things to check out: +and other symptoms persist, here are some additional things to check out.

    We have credible reports from developers that faulty network hardware, such as a single faulty network card, can cause symptoms similar to read caching and data corruption. @@ -568,70 +567,69 @@ rebuild the data files in question. This involves creating a new data file with same definition as the file to be rebuilt and transferring the data from the old file to the new one. There are several known methods for doing this that can be found in our Knowledge Base. -

    Common Errors

    -In some sites locking problems surface as soon as a server is installed, in other sites +

    Common Errors

    +In some sites, locking problems surface as soon as a server is installed; in other sites locking problems may not surface for a long time. Almost without exception, when a locking problem does surface it will cause embarrassment and potential data corruption.

    -Over the past few years there have been a number of complaints on the samba mailing lists -that have claimed that samba caused data corruption. Three causes have been identified +Over the past few years there have been a number of complaints on the Samba mailing lists +that have claimed that Samba caused data corruption. Three causes have been identified so far:

    • Incorrect configuration of opportunistic locking (incompatible with the application - being used. This is a VERY common problem even where MS Windows NT4 or MS Windows 200x - based servers were in use. It is imperative that the software application vendors' + being used. This is a common problem even where MS Windows NT4 or MS Windows + 200x-based servers were in use. It is imperative that the software application vendors' instructions for configuration of file locking should be followed. If in doubt, disable oplocks on both the server and the client. Disabling of all forms of file caching on the MS Windows client may be necessary also.

    • - Defective network cards, cables, or HUBs / Switched. This is generally a more - prevalent factor with low cost networking hardware, though occasionally there - have been problems with incompatibilities in more up market hardware also. + Defective network cards, cables, or HUBs/Switched. This is generally a more + prevalent factor with low cost networking hardware, although occasionally there + have also been problems with incompatibilities in more up-market hardware.

    • - There have been some random reports of samba log files being written over data - files. This has been reported by very few sites (about 5 in the past 3 years) - and all attempts to reproduce the problem have failed. The Samba-Team has been - unable to catch this happening and thus has NOT been able to isolate any particular - cause. Considering the millions of systems that use samba, for the sites that have - been affected by this as well as for the Samba-Team this is a frustrating and - a vexing challenge. If you see this type of thing happening please create a bug - report on https://bugzilla.samba.org without delay. Make sure that you give as much - information as you possibly can to help isolate the cause and to allow reproduction - of the problem (an essential step in problem isolation and correction). -

    locking.tdb error messages

    + There have been some random reports of Samba log files being written over data + files. This has been reported by very few sites (about five in the past three years) + and all attempts to reproduce the problem have failed. The Samba Team has been + unable to catch this happening and thus has not been able to isolate any particular + cause. Considering the millions of systems that use Samba, for the sites that have + been affected by this as well as for the Samba Team this is a frustrating and + a vexing challenge. If you see this type of thing happening, please create a bug + report on Samba Bugzilla without delay. + Make sure that you give as much information as you possibly can help isolate the + cause and to allow replication of the problem (an essential step in problem isolation and correction). +

    locking.tdb Error Messages

    - We are seeing lots of errors in the samba logs like: -” -

    +	We are seeing lots of errors in the Samba logs, like:
    +
     tdb(/usr/local/samba_2.2.7/var/locks/locking.tdb): rec_read bad magic
      0x4d6f4b61 at offset=36116
    -

    -“ +

    + What do these mean? ”

    - Corrupted tdb. Stop all instances of smbd, delete locking.tdb, restart smbd. -

    Problems saving files in MS Office on Windows XP

    This is a bug in Windows XP. More information can be - found in Microsoft Knowledge Base article 812937.

    Long delays deleting files over network with XP SP1

    It sometimes takes approximately 35 seconds to delete files over the network after XP SP1 has been applied

    This is a bug in Windows XP. More information can be - found in - Microsoft Knowledge Base article 811492.

    Additional Reading

    + This error indicated a corrupted tdb. Stop all instances of smbd, delete locking.tdb, and restart smbd. +

    Problems Saving Files in MS Office on Windows XP

    This is a bug in Windows XP. More information can be + found in Microsoft Knowledge Base article 812937.

    Long Delays Deleting Files Over Network with XP SP1

    It sometimes takes approximately 35 seconds to delete files over the network after XP SP1 has been applied.

    This is a bug in Windows XP. More information can be found in + Microsoft Knowledge Base article 811492.

    Additional Reading

    You may want to check for an updated version of this white paper on our Web site from time to time. Many of our white papers are updated as information changes. For those papers, -the Last Edited date is always at the top of the paper. +the last edited date is always at the top of the paper.

    Section of the Microsoft MSDN Library on opportunistic locking:

    Opportunistic Locks, Microsoft Developer Network (MSDN), Windows Development > Windows Base Services > Files and I/O > SDK Documentation > File Storage > File Systems > About File Systems > Opportunistic Locks, Microsoft Corporation. -http://msdn.microsoft.com/library/en-us/fileio/storage_5yk3.asp +http://msdn.microsoft.com/library/en-us/fileio/storage_5yk3.asp

    -Microsoft Knowledge Base Article Q224992 "Maintaining Transactional Integrity with OPLOCKS", -Microsoft Corporation, April 1999, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q224992. + Microsoft Knowledge Base Article Q224992 “Maintaining Transactional Integrity +with OPLOCKS”, +Microsoft Corporation, April 1999, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q224992.

    -Microsoft Knowledge Base Article Q296264 "Configuring Opportunistic Locking in Windows 2000", -Microsoft Corporation, April 2001, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q296264. +Microsoft Knowledge Base Article Q296264 “Configuring Opportunistic Locking in Windows 2000”, +Microsoft Corporation, April 2001, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q296264.

    -Microsoft Knowledge Base Article Q129202 "PC Ext: Explanation of Opportunistic Locking on Windows NT", - Microsoft Corporation, April 1995, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q129202. -

    +Microsoft Knowledge Base Article Q129202 “PC Ext: Explanation of Opportunistic Locking on Windows NT”, +Microsoft Corporation, April 1995, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q129202. +

    diff --git a/docs/htmldocs/migration.html b/docs/htmldocs/migration.html index 36b6edb0b1..27a4e01348 100644 --- a/docs/htmldocs/migration.html +++ b/docs/htmldocs/migration.html @@ -1 +1 @@ -Part IV. Migration and Updating +Part IV. Migration and Updating diff --git a/docs/htmldocs/msdfs.html b/docs/htmldocs/msdfs.html index 9fdf906ed0..139bfff550 100644 --- a/docs/htmldocs/msdfs.html +++ b/docs/htmldocs/msdfs.html @@ -1,51 +1,88 @@ -Chapter 17. Hosting a Microsoft Distributed File System tree on Samba

    Chapter 17. Hosting a Microsoft Distributed File System tree on Samba

    Shirish Kalele

    Samba Team & Veritas Software


    +Chapter 17. Hosting a Microsoft Distributed File System tree on Samba

    Chapter 17. Hosting a Microsoft Distributed File System tree on Samba

    Shirish Kalele

    Samba Team & Veritas Software

    12 Jul 2000

    Features and Benefits

    - The Distributed File System (or DFS) provides a means of separating the logical +

    John H. Terpstra

    Samba Team

    12 Jul 2000

    Features and Benefits

    + The Distributed File System (DFS) provides a means of separating the logical view of files and directories that users see from the actual physical locations of these resources on the network. It allows for higher availability, smoother - storage expansion, load balancing etc. + storage expansion, load balancing, and so on.

    For information about DFS, refer to the -Microsoft documentation. -

    +Microsoft documentation. This document explains how to host a DFS tree on a UNIX machine (for DFS-aware clients to browse) using Samba.

    - To enable SMB-based DFS for Samba, configure it with the --with-msdfs + To enable SMB-based DFS for Samba, configure it with the --with-msdfs option. Once built, a Samba server can be made a DFS server by setting the global - boolean host msdfs + Boolean host msdfs parameter in the smb.conf file. You designate a share as a DFS - root using the share level boolean msdfs root parameter. A DFS root directory on Samba hosts DFS + root using the Share Level Boolean msdfs root parameter. A DFS root directory on Samba hosts DFS links in the form of symbolic links that point to other servers. For example, a symbolic link junction->msdfs:storage1\share1 in the share directory acts as the DFS junction. When DFS-aware clients attempt to access the junction link, - they are redirected to the storage location (in this case, \\storage1\share1). + they are redirected to the storage location (in this case, \\storage1\share1).

    DFS trees on Samba work with all DFS-aware clients ranging from Windows 95 to 200x. -

    - Here's an example of setting up a DFS tree on a Samba server. -

    Example 17.1. smb.conf with DFS configured

    [global]
    netbios name = GANDALF
    host msdfs = yes
    [dfs]
    path = /export/dfsroot
    msdfs root = yes

    In the /export/dfsroot directory we set up our DFS links to - other servers on the network.

    +	 shows how to setup a DFS tree on a Samba server.
    +	In the /export/dfsroot directory, you set up your DFS links to 
    +	other servers on the network.
    +

     root# cd /export/dfsroot
     root# chown root /export/dfsroot
     root# chmod 755 /export/dfsroot
     root# ln -s msdfs:storageA\\shareA linka
     root# ln -s msdfs:serverB\\share,serverC\\share linkb
    -

    You should set up the permissions and ownership of - the directory acting as the DFS root such that only designated +

    +

    +

    Example 17.1. smb.conf with DFS configured

    [global]
    netbios name = GANDALF
    host msdfs = yes
    [dfs]
    path = /export/dfsroot
    msdfs root = yes

    +

    You should set up the permissions and ownership of + the directory acting as the DFS root so that only designated users can create, delete or modify the msdfs links. Also note that symlink names should be all lowercase. This limitation exists to have Samba avoid trying all the case combinations to get at - the link name. Finally set up the symbolic links to point to the - network shares you want, and start Samba.

    Users on DFS-aware clients can now browse the DFS tree + the link name. Finally, set up the symbolic links to point to the + network shares you want and start Samba.

    Users on DFS-aware clients can now browse the DFS tree on the Samba server at \\samba\dfs. Accessing links linka or linkb (which appear as directories to the client) - takes users directly to the appropriate shares on the network.

    Common Errors

    • Windows clients need to be rebooted - if a previously mounted non-dfs share is made a DFS + takes users directly to the appropriate shares on the network.

    Common Errors

    • Windows clients need to be rebooted + if a previously mounted non-DFS share is made a DFS root or vice versa. A better way is to introduce a - new share and make it the DFS root.

    • Currently there's a restriction that msdfs + new share and make it the DFS root.

    • Currently, there's a restriction that msdfs symlink names should all be lowercase.

    • For security purposes, the directory acting as the root of the DFS tree should have ownership - and permissions set so that only designated users can - modify the symbolic links in the directory.

    + and permissions set so only designated users can + modify the symbolic links in the directory.

    MSDFS UNIX Path Is Case-Critical

    + A network administrator sent advice to the Samba mailing list + after a long sessions trying to determine why DFS was not working. + His advice is worth noting. +

    + I spent some time trying to figure out why my particular + dfs root wasn't working. I noted in the documenation that + the symlink should be in all lowercase. It should be + amended that the entire path to the symlink should all be + in lowercase as well. +

    + For example, I had a share defined as such: + +

    +		[pub]
    +			path = /export/home/Shares/public_share
    +			msdfs root = yes
    +		

    + + and I could not make my Windows 9x/Me (with the dfs client installed) + follow this symlink: + +

    +			damage1 -> msdfs:damage\test-share
    +		

    +

    + Running a debug level of 10 reveals: + +

    +		[2003/08/20 11:40:33, 5] msdfs/msdfs.c:is_msdfs_link(176)
    +		  is_msdfs_link: /export/home/shares/public_share/* does not exist.
    +		

    + + Curious. So I changed the directory name from .../Shares/... to + .../shares/... (along with my service definition) and it worked! +

    diff --git a/docs/htmldocs/net.8.html b/docs/htmldocs/net.8.html index a98700e42f..ae7e2e0913 100644 --- a/docs/htmldocs/net.8.html +++ b/docs/htmldocs/net.8.html @@ -24,7 +24,7 @@ Defaults to trying 445 first, then 139.

    -n <primary NetBIOS name>

    This option allows you to override the NetBIOS name that Samba uses for itself. This is identical -to setting the netbios name parameter in the smb.conf file. +to setting the netbios name parameter in the smb.conf file. However, a command line setting will take precedence over settings in smb.conf.

    -s <configuration file>

    The file specified contains the @@ -47,13 +47,13 @@ not specified is zero.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of +day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will -override the log level parameter +override the log level parameter in the smb.conf file.

    COMMANDS

    CHANGESECRETPW

    This command allows the Samba machine account password to be set from an external application to a machine account password that has already been stored in Active Directory. DO NOT USE this command unless you know exactly what you are doing. The use of this command requires that the force flag (-f) diff --git a/docs/htmldocs/nmbd.8.html b/docs/htmldocs/nmbd.8.html index f3e514fa77..72454f4b60 100644 --- a/docs/htmldocs/nmbd.8.html +++ b/docs/htmldocs/nmbd.8.html @@ -51,7 +51,7 @@

    -H <filename>

    NetBIOS lmhosts file. The lmhosts file is a list of NetBIOS names to IP addresses that is loaded by the nmbd server and used via the name - resolution mechanism name resolve order described in smb.conf(5) to resolve any + resolution mechanism name resolve order described in smb.conf(5) to resolve any NetBIOS name queries needed by the server. Note that the contents of this file are NOT used by nmbd to answer any name queries. @@ -60,8 +60,8 @@ Samba as part of the build process. Common defaults are /usr/local/samba/lib/lmhosts, /usr/samba/lib/lmhosts or - /etc/samba/lmhosts. See the lmhosts(5) man page for details on the contents of this file.

    -V

    Prints the version number for -smbd.

    -s <configuration file>

    The file specified contains the + /etc/samba/lmhosts. See the lmhosts(5) man page for details on the contents of this file.

    -V

    Prints the program version number. +

    -s <configuration file>

    The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well @@ -74,13 +74,13 @@ not specified is zero.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of +day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will -override the log level parameter +override the log level parameter in the smb.conf file.

    -l|--logfile=logbasename

    File name for log/debug files. The extension ".client" will be appended. The log file is never removed by the client. @@ -104,13 +104,13 @@ never removed by the client. configuration file. Other common places that systems install this file are /usr/samba/lib/smb.conf and /etc/samba/smb.conf.

    When run as a WINS server (see the - wins support + wins support parameter in the smb.conf(5) man page), nmbd will store the WINS database in the file wins.dat in the var/locks directory configured under wherever Samba was configured to install itself.

    If nmbd is acting as a - browse master (see the local master + browse master (see the local master parameter in the smb.conf(5) man page, nmbd will store the browsing database in the file browse.dat in the var/locks directory @@ -134,14 +134,14 @@ never removed by the client. inetd(8), smbd(8), smb.conf(5), smbclient(1), testparm(1), testprns(1), and the Internet RFC's rfc1001.txt, rfc1002.txt. In addition the CIFS (formerly SMB) specification is available - as a link from the Web page - http://samba.org/cifs/.

    AUTHOR

    The original Samba software and related utilities + as a link from the Web page + http://samba.org/cifs/.

    AUTHOR

    The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

    The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another - excellent piece of Open Source software, available at - ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 + excellent piece of Open Source software, available at + ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.

    diff --git a/docs/htmldocs/nmblookup.1.html b/docs/htmldocs/nmblookup.1.html index 10131752b3..9ab78808fc 100644 --- a/docs/htmldocs/nmblookup.1.html +++ b/docs/htmldocs/nmblookup.1.html @@ -28,7 +28,7 @@

    -A

    Interpret name as an IP Address and do a node status query on this address.

    -n <primary NetBIOS name>

    This option allows you to override the NetBIOS name that Samba uses for itself. This is identical -to setting the netbios name parameter in the smb.conf file. +to setting the netbios name parameter in the smb.conf file. However, a command line setting will take precedence over settings in smb.conf.

    -i <scope>

    This specifies a NetBIOS scope that @@ -48,13 +48,13 @@ options.

    -h|--help

    Print a sum

    -B <broadcast address>

    Send the query to the given broadcast address. Without this option the default behavior of nmblookup is to send the query to the broadcast address of the network interfaces as - either auto-detected or defined in the interfaces - parameter of the smb.conf(5) file. + either auto-detected or defined in the interfaces + parameter of the smb.conf(5) file.

    -U <unicast address>

    Do a unicast query to the specified address or host unicast address. This option (along with the -R option) is needed to - query a WINS server.

    -V

    Prints the version number for -smbd.

    -s <configuration file>

    The file specified contains the + query a WINS server.

    -V

    Prints the program version number. +

    -s <configuration file>

    The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well @@ -67,13 +67,13 @@ not specified is zero.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of +day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will -override the log level parameter +override the log level parameter in the smb.conf file.

    -l|--logfile=logbasename

    File name for log/debug files. The extension ".client" will be appended. The log file is never removed by the client. @@ -98,8 +98,8 @@ never removed by the client. by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

    The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another - excellent piece of Open Source software, available at - ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 + excellent piece of Open Source software, available at + ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.

    diff --git a/docs/htmldocs/ntlm_auth.1.html b/docs/htmldocs/ntlm_auth.1.html index 27dfee1a0f..a1ba53137d 100644 --- a/docs/htmldocs/ntlm_auth.1.html +++ b/docs/htmldocs/ntlm_auth.1.html @@ -11,8 +11,8 @@ Specify domain of user to authenticate

    --workstation=WORKSTATION

    Specify the workstation the user authenticated from -

    --challenge=STRING

    challenge (HEX encoded)

    --lm-response=RESPONSE

    LM Response to the challenge (HEX encoded)

    --nt-response=RESPONSE

    NT or NTLMv2 Response to the challenge (HEX encoded)

    --password=PASSWORD

    User's plaintext password

    --request-lm-key

    Retreive LM session key

    --request-nt-key

    Request NT key

    -V

    Prints the version number for -smbd.

    -s <configuration file>

    The file specified contains the +

    --challenge=STRING

    challenge (HEX encoded)

    --lm-response=RESPONSE

    LM Response to the challenge (HEX encoded)

    --nt-response=RESPONSE

    NT or NTLMv2 Response to the challenge (HEX encoded)

    --password=PASSWORD

    User's plaintext password

    --request-lm-key

    Retreive LM session key

    --request-nt-key

    Request NT key

    -V

    Prints the program version number. +

    -s <configuration file>

    The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well @@ -25,13 +25,13 @@ not specified is zero.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of +day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will -override the log level parameter +override the log level parameter in the smb.conf file.

    -l|--logfile=logbasename

    File name for log/debug files. The extension ".client" will be appended. The log file is never removed by the client. diff --git a/docs/htmldocs/optional.html b/docs/htmldocs/optional.html index bd76a344f8..af8b99a5f3 100644 --- a/docs/htmldocs/optional.html +++ b/docs/htmldocs/optional.html @@ -1,35 +1,6 @@ -Part III. Advanced Configuration

    Advanced Configuration

    Valuable Nuts and Bolts Information

    +Part III. Advanced Configuration

    Advanced Configuration

    Valuable Nuts and Bolts Information

    Samba has several features that you might want or might not want to use. The chapters in this part each cover specific Samba features. -

    Table of Contents

    10. Samba / MS Windows Network Browsing Guide
    Features and Benefits
    What is Browsing?
    Discussion
    NetBIOS over TCP/IP
    TCP/IP - without NetBIOS
    DNS and Active Directory
    How Browsing Functions
    Setting up WORKGROUP Browsing
    Setting up DOMAIN Browsing
    Forcing Samba to be the master
    Making Samba the domain master
    Note about broadcast addresses
    Multiple interfaces
    Use of the Remote Announce parameter
    Use of the Remote Browse Sync parameter
    WINS - The Windows Internetworking Name Server
    Setting up a WINS server
    WINS Replication
    Static WINS Entries
    Helpful Hints
    Windows Networking Protocols
    Name Resolution Order
    Technical Overview of browsing
    Browsing support in Samba
    Problem resolution
    Browsing across subnets
    Common Errors
    How can one flush the Samba NetBIOS name cache without restarting Samba?
    My client reports "This server is not configured to list shared resources"
    I get an Unable to browse the network error
    11. Account Information Databases
    Features and Benefits
    Backwards Compatibility Backends
    New Backends
    Technical Information
    Important Notes About Security
    Mapping User Identifiers between MS Windows and UNIX
    Mapping Common UIDs/GIDs on Distributed Machines
    Account Management Tools
    The smbpasswd Command
    The pdbedit Command
    Password Backends
    Plain Text
    smbpasswd - Encrypted Password Database
    tdbsam
    ldapsam
    MySQL
    XML
    Common Errors
    Users can not logon
    Users being added to wrong backend database
    auth methods does not work
    12. Mapping MS Windows and UNIX Groups
    Features and Benefits
    Discussion
    Example Configuration
    Configuration Scripts
    Sample smb.conf add group script
    Script to configure Group Mapping
    Common Errors
    Adding Groups Fails
    Adding MS Windows Groups to MS Windows Groups Fails
    Adding Domain Users to the Power Users group
    13. File, Directory and Share Access Controls
    Features and Benefits
    File System Access Controls
    MS Windows NTFS Comparison with UNIX File Systems
    Managing Directories
    File and Directory Access Control
    Share Definition Access Controls
    User and Group Based Controls
    File and Directory Permissions Based Controls
    Miscellaneous Controls
    Access Controls on Shares
    Share Permissions Management
    MS Windows Access Control Lists and UNIX Interoperability
    Managing UNIX permissions Using NT Security Dialogs
    Viewing File Security on a Samba Share
    Viewing file ownership
    Viewing File or Directory Permissions
    Modifying file or directory permissions
    Interaction with the standard Samba create mask - parameters
    Interaction with the standard Samba file attribute mapping
    Common Errors
    Users can not write to a public share
    I have set force user but Samba still makes root the owner of all the files I touch!
    MS Word with Samba changes owner of file
    14. File and Record Locking
    Features and Benefits
    Discussion
    Opportunistic Locking Overview
    Samba Opportunistic Locking Control
    Example Configuration
    MS Windows Opportunistic Locking and Caching Controls
    Workstation Service Entries
    Server Service Entries
    Persistent Data Corruption
    Common Errors
    locking.tdb error messages
    Problems saving files in MS Office on Windows XP
    Long delays deleting files over network with XP SP1
    Additional Reading
    15. Securing Samba
    Introduction
    Features and Benefits
    Technical Discussion of Protective Measures and Issues
    Using host based protection
    User based protection
    Using interface protection
    Using a firewall
    Using a IPC$ share deny
    NTLMv2 Security
    Upgrading Samba
    Common Errors
    Smbclient works on localhost, but the network is dead
    Why can users access home directories of other users?
    16. Interdomain Trust Relationships
    Features and Benefits
    Trust Relationship Background
    Native MS Windows NT4 Trusts Configuration
    Creating an NT4 Domain Trust
    Completing an NT4 Domain Trust
    Inter-Domain Trust Facilities
    Configuring Samba NT-style Domain Trusts
    Samba as the Trusted Domain
    Samba as the Trusting Domain
    NT4-style Domain Trusts with Windows 2000
    Common Errors
    17. Hosting a Microsoft Distributed File System tree on Samba
    Features and Benefits
    Common Errors
    18. Classical Printing Support
    Features and Benefits
    Technical Introduction
    What happens if you send a Job from a Client
    Printing Related Configuration Parameters
    Parameters Recommended for Use
    A simple Configuration to Print
    Verification of "Settings in Use" with testparm
    A little Experiment to warn you
    Extended Sample Configuration to Print
    Detailed Explanation of the Example's Settings
    The [global] Section
    The [printers] Section
    Any [my_printer_name] Section
    Print Commands
    Default Print Commands for various UNIX Print Subsystems
    Setting up your own Print Commands
    Innovations in Samba Printing since 2.2
    Client Drivers on Samba Server for Point'n'Print
    The [printer$] Section is removed from Samba 3
    Creating the [print$] Share
    Parameters in the [print$] Section
    Subdirectory Structure in [print$]
    Installing Drivers into [print$]
    Setting Drivers for existing Printers with a Client GUI
    Setting Drivers for existing Printers with -rpcclient
    Client Driver Install Procedure
    The first Client Driver Installation
    IMPORTANT! Setting Device Modes on new Printers
    Further Client Driver Install Procedures
    Always make first Client Connection as root or "printer admin"
    Other Gotchas
    Setting Default Print Options for the Client Drivers
    Supporting large Numbers of Printers
    Adding new Printers with the Windows NT APW
    Weird Error Message Cannot connect under a -different Name
    Be careful when assembling Driver Files
    Samba and Printer Ports
    Avoiding the most common Misconfigurations of the Client Driver
    The Imprints Toolset
    What is Imprints?
    Creating Printer Driver Packages
    The Imprints Server
    The Installation Client
    Add Network Printers at Logon without User Interaction
    The addprinter command
    Migration of "Classical" printing to Samba
    Publishing Printer Information in Active Directory or LDAP
    Common Errors
    I give my root password but I don't get access
    My printjobs get spooled into the spooling directory, but then get lost
    19. CUPS Printing Support in Samba 3.0
    Introduction
    Features and Benefits
    Overview
    Basic Configuration of CUPS support
    Linking of smbd with libcups.so
    Simple smb.conf Settings for CUPS
    More complex smb.conf Settings for -CUPS
    Advanced Configuration
    Central spooling vs. "Peer-to-Peer" printing
    CUPS/Samba as a "spooling-only" Print Server; "raw" printing -with Vendor Drivers on Windows Clients
    Driver Installation Methods on Windows Clients
    Explicitly enable "raw" printing for -application/octet-stream!
    Three familiar Methods for driver upload plus a new one
    Using CUPS/Samba in an advanced Way -- intelligent printing -with PostScript Driver Download
    GDI on Windows -- PostScript on UNIX
    Windows Drivers, GDI and EMF
    UNIX Printfile Conversion and GUI Basics
    PostScript and Ghostscript
    Ghostscript -- the Software RIP for non-PostScript Printers
    PostScript Printer Description (PPD) Specification
    CUPS can use all Windows-formatted Vendor PPDs
    CUPS also uses PPDs for non-PostScript Printers
    The CUPS Filtering Architecture
    MIME types and CUPS Filters
    MIME type Conversion Rules
    Filter Requirements
    Prefilters
    pstops
    pstoraster
    imagetops and imagetoraster
    rasterto [printers specific]
    CUPS Backends
    cupsomatic/Foomatic -- how do they fit into the Picture?
    The Complete Picture
    mime.convs
    "Raw" printing
    "application/octet-stream" printing
    PostScript Printer Descriptions (PPDs) for non-PS Printers
    Difference between cupsomatic/foomatic-rip and -native CUPS printing
    Examples for filtering Chains
    Sources of CUPS drivers / PPDs
    Printing with Interface Scripts
    Network printing (purely Windows)
    From Windows Clients to an NT Print Server
    Driver Execution on the Client
    Driver Execution on the Server
    Network Printing (Windows clients -- UNIX/Samba Print -Servers)
    From Windows Clients to a CUPS/Samba Print Server
    Samba receiving Jobfiles and passing them to CUPS
    Network PostScript RIP: CUPS Filters on Server -- clients use -PostScript Driver with CUPS-PPDs
    PPDs for non-PS Printers on UNIX
    PPDs for non-PS Printers on Windows
    Windows Terminal Servers (WTS) as CUPS Clients
    Printer Drivers running in "Kernel Mode" cause many -Problems
    Workarounds impose Heavy Limitations
    CUPS: a "Magical Stone"?
    PostScript Drivers with no major problems -- even in Kernel -Mode
    Setting up CUPS for driver Download
    cupsaddsmb: the unknown Utility
    Prepare your smb.conf for cupsaddsmb
    CUPS Package of "PostScript Driver for WinNT/2k/XP"
    Recognize the different Driver Files
    Acquiring the Adobe Driver Files
    ESP Print Pro Package of "PostScript Driver for -WinNT/2k/XP"
    Caveats to be considered
    Benefits of using "CUPS PostScript Driver for -Windows NT/2k/XP" instead of Adobe Driver
    Run "cupsaddsmb" (quiet Mode)
    Run "cupsaddsmb" with verbose Output
    Understanding cupsaddsmb
    How to recognize if cupsaddsmb completed successfully
    cupsaddsmb with a Samba PDC
    cupsaddsmb Flowchart
    Installing the PostScript Driver on a Client
    Avoiding critical PostScript Driver Settings on the -Client
    Installing PostScript Driver Files manually (using -rpcclient)
    A Check of the rpcclient man Page
    Understanding the rpcclient man page
    Producing an Example by querying a Windows Box
    What is required for adddriver and setdriver to succeed
    Manual Driver Installation in 15 Steps
    Troubleshooting revisited
    The printing *.tdb Files
    Trivial DataBase Files
    Binary Format
    Losing *.tdb Files
    Using tdbbackup
    CUPS Print Drivers from Linuxprinting.org
    foomatic-rip and Foomatic explained
    foomatic-rip and Foomatic-PPD Download and Installation
    Page Accounting with CUPS
    Setting up Quotas
    Correct and incorrect Accounting
    Adobe and CUPS PostScript Drivers for Windows Clients
    The page_log File Syntax
    Possible Shortcomings
    Future Developments
    Other Accounting Tools
    Additional Material
    Auto-Deletion or Preservation of CUPS Spool Files
    CUPS Configuration Settings explained
    Pre-conditions
    Manual Configuration
    In Case of Trouble.....
    Printing from CUPS to Windows attached -Printers
    More CUPS filtering Chains
    Common Errors
    Win9x client can't install driver
    "cupsaddsmb" keeps asking for root password in - neverending loop
    "cupsaddsmb" gives "No PPD file for printer..." - message while PPD file is present
    Client can't connect to Samba printer
    Can't reconnect to Samba under new account - from Win2K/XP
    Avoid being connected to the Samba server as the - "wrong" user
    Upgrading to CUPS drivers from Adobe drivers on - NT/2K/XP clients gives problems
    Can't use "cupsaddsmb" on Samba server which is - a PDC
    Deleted Win2K printer driver is still shown
    Win2K/XP "Local Security - Policies"
    WinXP clients: "Administrator can not install - printers for all local users"
    "Print Change Notify" functions on - NT-clients
    WinXP-SP1
    Print options for all users can't be set on Win2K/XP
    Most common blunders in driver - settings on Windows clients
    cupsaddsmb does not work - with newly installed printer
    Permissions on -/var/spool/samba/ get reset after each -reboot
    Printer named "lp" -intermittently swallows jobs and spits out completely different -ones
    Location of Adobe PostScript driver files necessary for "cupsaddsmb"
    An Overview of the CUPS Printing Processes
    20. Stackable VFS modules
    Features and Benefits
    Discussion
    Included modules
    audit
    extd_audit
    fake_perms
    recycle
    netatalk
    VFS modules available elsewhere
    DatabaseFS
    vscan
    21. Winbind: Use of Domain Accounts
    Features and Benefits
    Introduction
    What Winbind Provides
    Target Uses
    How Winbind Works
    Microsoft Remote Procedure Calls
    Microsoft Active Directory Services
    Name Service Switch
    Pluggable Authentication Modules
    User and Group ID Allocation
    Result Caching
    Installation and Configuration
    Introduction
    Requirements
    Testing Things Out
    Conclusion
    Common Errors
    NSCD Problem Warning
    22. Advanced Network Management
    Features and Benefits
    Remote Server Administration
    Remote Desktop Management
    Remote Management from NoMachines.Com
    Network Logon Script Magic
    Adding printers without user intervention
    Common Errors
    23. System and Account Policies
    Features and Benefits
    Creating and Managing System Policies
    Windows 9x/Me Policies
    Windows NT4 Style Policy Files
    MS Windows 200x / XP Professional Policies
    Managing Account/User Policies
    Samba Editreg Toolset
    Windows NT4/200x
    Samba PDC
    System Startup and Logon Processing Overview
    Common Errors
    Policy Does Not Work
    24. Desktop Profile Management
    Features and Benefits
    Roaming Profiles
    Samba Configuration for Profile Handling
    Windows Client Profile Configuration Information
    Sharing Profiles between W9x/Me and NT4/200x/XP workstations
    Profile Migration from Windows NT4/200x Server to Samba
    Mandatory profiles
    Creating/Managing Group Profiles
    Default Profile for Windows Users
    MS Windows 9x/Me
    MS Windows NT4 Workstation
    MS Windows 200x/XP
    Common Errors
    Setting up roaming profiles for just a few user's or group's?
    Can NOT use Roaming Profiles
    Changing the default profile
    25. PAM based Distributed Authentication
    Features and Benefits
    Technical Discussion
    PAM Configuration Syntax
    Example System Configurations
    smb.conf PAM Configuration
    Remote CIFS Authentication using winbindd.so
    Password Synchronization using pam_smbpass.so
    Common Errors
    pam_winbind problem
    Winbind is not resolving users and groups
    26. Integrating MS Windows networks with Samba
    Features and Benefits
    Background Information
    Name Resolution in a pure UNIX/Linux world
    /etc/hosts
    /etc/resolv.conf
    /etc/host.conf
    /etc/nsswitch.conf
    Name resolution as used within MS Windows networking
    The NetBIOS Name Cache
    The LMHOSTS file
    HOSTS file
    DNS Lookup
    WINS Lookup
    Common Errors
    Pinging works only in one way
    Very Slow Network Connections
    Samba server name change problem
    27. Unicode/Charsets
    Features and Benefits
    What are charsets and unicode?
    Samba and charsets
    Conversion from old names
    Japanese charsets
    Common errors
    CP850.so can't be found
    28. Samba Backup Techniques
    Note
    Features and Benefits
    29. High Availability Options
    Note
    +

    Table of Contents

    10. Network Browsing
    Features and Benefits
    What Is Browsing?
    Discussion
    NetBIOS over TCP/IP
    TCP/IP without NetBIOS
    DNS and Active Directory
    How Browsing Functions
    Configuring WORKGROUP Browsing
    DOMAIN Browsing Configuration
    Forcing Samba to Be the Master
    Making Samba the Domain Master
    Note about Broadcast Addresses
    Multiple Interfaces
    Use of the Remote Announce Parameter
    Use of the Remote Browse Sync Parameter
    WINS The Windows Internetworking Name Server
    WINS Server Configuration
    WINS Replication
    Static WINS Entries
    Helpful Hints
    Windows Networking Protocols
    Name Resolution Order
    Technical Overview of Browsing
    Browsing Support in Samba
    Problem Resolution
    Cross-Subnet Browsing
    Common Errors
    How Can One Flush the Samba NetBIOS Name Cache without Restarting Samba?
    Server Resources Can Not Be Listed
    I get an `Unable to browse the network' error
    Browsing of Shares and Directories is Very Slow
    11. Account Information Databases
    Features and Benefits
    Backward Compatibility Backends
    New Backends
    Technical Information
    Important Notes About Security
    Mapping User Identifiers between MS Windows and UNIX
    Mapping Common UIDs/GIDs on Distributed Machines
    Account Management Tools
    The smbpasswd Command
    The pdbedit Command
    Password Backends
    Plaintext
    smbpasswd Encrypted Password Database
    tdbsam
    ldapsam
    MySQL
    XML
    Common Errors
    Users Cannot Logon
    Users Being Added to the Wrong Backend Database
    Configuration of auth methods
    12. Group Mapping MS Windows and UNIX
    Features and Benefits
    Discussion
    Default Users, Groups and Relative Identifiers
    Example Configuration
    Configuration Scripts
    Sample smb.conf Add Group Script
    Script to Configure Group Mapping
    Common Errors
    Adding Groups Fails
    Adding MS Windows Groups to MS Windows Groups Fails
    Adding Domain Users to the Power Users Group
    13. File, Directory and Share Access Controls
    Features and Benefits
    File System Access Controls
    MS Windows NTFS Comparison with UNIX File Systems
    Managing Directories
    File and Directory Access Control
    Share Definition Access Controls
    User and Group-Based Controls
    File and Directory Permissions-Based Controls
    Miscellaneous Controls
    Access Controls on Shares
    Share Permissions Management
    MS Windows Access Control Lists and UNIX Interoperability
    Managing UNIX Permissions Using NT Security Dialogs
    Viewing File Security on a Samba Share
    Viewing File Ownership
    Viewing File or Directory Permissions
    Modifying File or Directory Permissions
    Interaction with the Standard Samba create mask Parameters
    Interaction with the Standard Samba File Attribute Mapping
    Common Errors
    Users Cannot Write to a Public Share
    File Operations Done as root with force user Set
    MS Word with Samba Changes Owner of File
    14. File and Record Locking
    Features and Benefits
    Discussion
    Opportunistic Locking Overview
    Samba Opportunistic Locking Control
    Example Configuration
    MS Windows Opportunistic Locking and Caching Controls
    Workstation Service Entries
    Server Service Entries
    Persistent Data Corruption
    Common Errors
    locking.tdb Error Messages
    Problems Saving Files in MS Office on Windows XP
    Long Delays Deleting Files Over Network with XP SP1
    Additional Reading
    15. Securing Samba
    Introduction
    Features and Benefits
    Technical Discussion of Protective Measures and Issues
    Using Host-Based Protection
    User-Based Protection
    Using Interface Protection
    Using a Firewall
    Using IPC$ Share-Based Denials
    NTLMv2 Security
    Upgrading Samba
    Common Errors
    Smbclient Works on Localhost, but the Network Is Dead
    Why Can Users Access Home Directories of Other Users?
    16. Interdomain Trust Relationships
    Features and Benefits
    Trust Relationship Background
    Native MS Windows NT4 Trusts Configuration
    Creating an NT4 Domain Trust
    Completing an NT4 Domain Trust
    Inter-Domain Trust Facilities
    Configuring Samba NT-Style Domain Trusts
    Samba as the Trusted Domain
    Samba as the Trusting Domain
    NT4-Style Domain Trusts with Windows 2000
    Common Errors
    17. Hosting a Microsoft Distributed File System tree on Samba
    Features and Benefits
    Common Errors
    MSDFS UNIX Path Is Case-Critical
    18. Classical Printing Support
    Features and Benefits
    Technical Introduction
    Client to Samba Print Job Processing
    Printing Related Configuration Parameters
    Simple Print Configuration
    Verifing Configuration with testparm
    Rapid Configuration Validation
    Extended Printing Configuration
    Detailed Explanation Settings
    Printing Developments Since Samba-2.2
    Point'n'Print Client Drivers on Samba Servers
    The Obsoleted [printer$] Section
    Creating the [print$] Share
    [print$] Section Parameters
    The [print$] Share Directory
    Installing Drivers into [print$]
    Add Printer Wizard Driver Installation
    Installing Print Drivers Using rpcclient
    Client Driver Installation Procedure
    First Client Driver Installation
    Setting Device Modes on New Printers
    Additional Client Driver Installation
    Always Make First Client Connection as root or printer admin
    Other Gotchas
    Setting Default Print Options for Client Drivers
    Supporting Large Numbers of Printers
    Adding New Printers with the Windows NT APW
    Error Message: Cannot connect under a different Name
    Take Care When Assembling Driver Files
    Samba and Printer Ports
    Avoiding Common Client Driver Misconfiguration
    The Imprints Toolset
    What is Imprints?
    Creating Printer Driver Packages
    The Imprints Server
    The Installation Client
    Adding Network Printers without User Interaction
    The addprinter Command
    Migration of Classical Printing to Samba
    Publishing Printer Information in Active Directory or LDAP
    Common Errors
    I Give My Root Password but I Do Not Get Access
    My Print Jobs Get Spooled into the Spooling Directory, but Then Get Lost
    19. CUPS Printing Support
    Introduction
    Features and Benefits
    Overview
    Basic CUPS Support Configuration
    Linking smbd with libcups.so
    Simple smb.conf Settings for CUPS
    More Complex CUPS smb.conf Settings
    Advanced Configuration
    Central Spooling vs. Peer-to-Peer Printing
    Raw Print Serving Vendor Drivers on Windows Clients
    Installation of Windows Client Drivers
    Explicitly Enable raw Printing for application/octet-stream
    Driver Upload Methods
    Advanced Intelligent Printing with PostScript Driver Download
    GDI on Windows -- PostScript on UNIX
    Windows Drivers, GDI and EMF
    UNIX Printfile Conversion and GUI Basics
    PostScript and Ghostscript
    Ghostscript the Software RIP for Non-PostScript Printers
    PostScript Printer Description (PPD) Specification
    Using Windows-Formatted Vendor PPDs
    CUPS Also Uses PPDs for Non-PostScript Printers
    The CUPS Filtering Architecture
    MIME Types and CUPS Filters
    MIME Type Conversion Rules
    Filtering Overview
    Prefilters
    pstops
    pstoraster
    imagetops and imagetoraster
    rasterto [printers specific]
    CUPS Backends
    The Role of cupsomatic/foomatic
    The Complete Picture
    mime.convs
    Raw Printing
    application/octet-stream Printing
    PostScript Printer Descriptions (PPDs) for Non-PS Printers
    cupsomatic/foomatic-rip Versus native CUPS Printing
    Examples for Filtering Chains
    Sources of CUPS Drivers/PPDs
    Printing with Interface Scripts
    Network Printing (Purely Windows)
    From Windows Clients to an NT Print Server
    Driver Execution on the Client
    Driver Execution on the Server
    Network Printing (Windows Clients UNIX/Samba Print +Servers)
    From Windows Clients to a CUPS/Samba Print Server
    Samba Receiving Jobfiles and Passing Them to CUPS
    Network PostScript RIP
    PPDs for Non-PS Printers on UNIX
    PPDs for Non-PS Printers on Windows
    Windows Terminal Servers (WTS) as CUPS Clients
    Printer Drivers Running in Kernel Mode Cause Many +Problems
    Workarounds Impose Heavy Limitations
    CUPS: A Magical Stone?
    PostScript Drivers with No Major Problems Even in Kernel +Mode
    Configuring CUPS for Driver Download
    cupsaddsmb: The Unknown Utility
    Prepare Your smb.conf for cupsaddsmb
    CUPS PostScript Driver for Windows NT/200x/XP
    Recognizing Different Driver Files
    Acquiring the Adobe Driver Files
    ESP Print Pro PostScript Driver for Windows NT/200x/XP
    Caveats to be Considered
    Windows CUPS PostScript Driver Versus Adobe Driver
    Run cupsaddsmb (Quiet Mode)
    Run cupsaddsmb with Verbose Output
    Understanding cupsaddsmb
    How to Recognize If cupsaddsmb Completed Successfully
    cupsaddsmb with a Samba PDC
    cupsaddsmb Flowchart
    Installing the PostScript Driver on a Client
    Avoiding Critical PostScript Driver Settings on the Client
    Installing PostScript Driver Files Manually Using rpcclient
    A Check of the rpcclient man Page
    Understanding the rpcclient man Page
    Producing an Example by Querying a Windows Box
    Requirements for adddriver and setdriver to Succeed
    Manual Driver Installation in 15 Steps
    Troubleshooting Revisited
    The Printing *.tdb Files
    Trivial Database Files
    Binary Format
    Losing *.tdb Files
    Using tdbbackup
    CUPS Print Drivers from Linuxprinting.org
    foomatic-rip and Foomatic Explained
    foomatic-rip and Foomatic-PPD Download and Installation
    Page Accounting with CUPS
    Setting Up Quotas
    Correct and Incorrect Accounting
    Adobe and CUPS PostScript Drivers for Windows Clients
    The page_log File Syntax
    Possible Shortcomings
    Future Developments
    Additional Material
    Auto-Deletion or Preservation of CUPS Spool Files
    CUPS Configuration Settings Explained
    Pre-Conditions
    Manual Configuration
    Printing from CUPS to Windows Attached Printers
    More CUPS-Filtering Chains
    Common Errors
    Windows 9x/ME Client Can't Install Driver
    cupsaddsmb Keeps Asking for Root Password in Never-ending Loop
    cupsaddsmb Errors
    Client Can't Connect to Samba Printer
    New Account Reconnection from Windows 200x/XP Troubles
    Avoid Being Connected to the Samba Server as the Wrong User
    Upgrading to CUPS Drivers from Adobe Drivers
    Can't Use cupsaddsmb on Samba Server Which Is a PDC
    Deleted Windows 200x Printer Driver Is Still Shown
    Windows 200x/XP "Local Security Policies"
    Administrator Cannot Install Printers for All Local Users
    Print Change Notify Functions on NT-clients
    WinXP-SP1
    Print Options for All Users Can't Be Set on Windows 200x/XP
    Most Common Blunders in Driver Settings on Windows Clients
    cupsaddsmb Does Not Work with Newly Installed Printer
    Permissions on /var/spool/samba/ Get Reset After Each Reboot
    Print Queue Called lp Mis-handles Print Jobs
    Location of Adobe PostScript Driver Files for cupsaddsmb
    Overview of the CUPS Printing Processes
    20. Stackable VFS modules
    Features and Benefits
    Discussion
    Included Modules
    audit
    extd_audit
    fake_perms
    recycle
    netatalk
    VFS Modules Available Elsewhere
    DatabaseFS
    vscan
    21. Winbind: Use of Domain Accounts
    Features and Benefits
    Introduction
    What Winbind Provides
    Target Uses
    How Winbind Works
    Microsoft Remote Procedure Calls
    Microsoft Active Directory Services
    Name Service Switch
    Pluggable Authentication Modules
    User and Group ID Allocation
    Result Caching
    Installation and Configuration
    Introduction
    Requirements
    Testing Things Out
    Conclusion
    Common Errors
    NSCD Problem Warning
    Winbind Is Not Resolving Users and Groups
    22. Advanced Network Management
    Features and Benefits
    Remote Server Administration
    Remote Desktop Management
    Remote Management from NoMachine.Com
    Network Logon Script Magic
    Adding Printers without User Intervention
    23. System and Account Policies
    Features and Benefits
    Creating and Managing System Policies
    Windows 9x/ME Policies
    Windows NT4-Style Policy Files
    MS Windows 200x/XP Professional Policies
    Managing Account/User Policies
    Management Tools
    Samba Editreg Toolset
    Windows NT4/200x
    Samba PDC
    System Startup and Logon Processing Overview
    Common Errors
    Policy Does Not Work
    24. Desktop Profile Management
    Features and Benefits
    Roaming Profiles
    Samba Configuration for Profile Handling
    Windows Client Profile Configuration Information
    Sharing Profiles between W9x/Me and NT4/200x/XP Workstations
    Profile Migration from Windows NT4/200x Server to Samba
    Mandatory Profiles
    Creating and Managing Group Profiles
    Default Profile for Windows Users
    MS Windows 9x/Me
    MS Windows NT4 Workstation
    MS Windows 200x/XP
    Common Errors
    Configuring Roaming Profiles for a Few Users or Groups
    Cannot Use Roaming Profiles
    Changing the Default Profile
    25. PAM-Based Distributed Authentication
    Features and Benefits
    Technical Discussion
    PAM Configuration Syntax
    Example System Configurations
    smb.conf PAM Configuration
    Remote CIFS Authentication Using winbindd.so
    Password Synchronization Using pam_smbpass.so
    Common Errors
    pam_winbind Problem
    Winbind Is Not Resolving Users and Groups
    26. Integrating MS Windows Networks with Samba
    Features and Benefits
    Background Information
    Name Resolution in a Pure UNIX/Linux World
    /etc/hosts
    /etc/resolv.conf
    /etc/host.conf
    /etc/nsswitch.conf
    Name Resolution as Used within MS Windows Networking
    The NetBIOS Name Cache
    The LMHOSTS File
    HOSTS File
    DNS Lookup
    WINS Lookup
    Common Errors
    Pinging Works Only in One Way
    Very Slow Network Connections
    Samba Server Name Change Problem
    27. Unicode/Charsets
    Features and Benefits
    What Are Charsets and Unicode?
    Samba and Charsets
    Conversion from Old Names
    Japanese Charsets
    Common Errors
    CP850.so Can't Be Found
    28. Samba Backup Techniques
    Note
    Features and Benefits
    29. High Availability Options
    Note
    diff --git a/docs/htmldocs/pam.html b/docs/htmldocs/pam.html index 8edbdb26ca..f41a9bc5c8 100644 --- a/docs/htmldocs/pam.html +++ b/docs/htmldocs/pam.html @@ -1,101 +1,104 @@ -Chapter 25. PAM based Distributed Authentication

    Chapter 25. PAM based Distributed Authentication

    John H. Terpstra

    Samba Team

    Stephen Langasek

    May 31, 2003

    -This chapter you should help you to deploy winbind based authentication on any PAM enabled -UNIX/Linux system. Winbind can be used to enable user level application access authentication -from any MS Windows NT Domain, MS Windows 200x Active Directory based domain, or any Samba -based domain environment. It will also help you to configure PAM based local host access +Chapter 25. PAM-Based Distributed Authentication

    Chapter 25. PAM-Based Distributed Authentication

    John H. Terpstra

    Samba Team

    Stephen Langasek

    May 31, 2003

    +This chapter should help you to deploy Winbind-based authentication on any PAM-enabled +UNIX/Linux system. Winbind can be used to enable User-Level application access authentication +from any MS Windows NT Domain, MS Windows 200x Active Directory-based +domain, or any Samba-based domain environment. It will also help you to configure PAM-based local host access controls that are appropriate to your Samba configuration.

    -In addition to knowing how to configure winbind into PAM, you will learn generic PAM management -possibilities and in particular how to deploy tools like pam_smbpass.so to your advantage. +In addition to knowing how to configure Winbind into PAM, you will learn generic PAM management +possibilities and in particular how to deploy tools like pam_smbpass.so to your advantage.

    Note

    -The use of Winbind require more than PAM configuration alone. Please refer to the Winbind chapter. -

    Features and Benefits

    -A number of UNIX systems (eg: Sun Solaris), as well as the xxxxBSD family and Linux, +The use of Winbind requires more than PAM configuration alone. +Please refer to , for further information regarding Winbind. +

    Features and Benefits

    +A number of UNIX systems (e.g., Sun Solaris), as well as the xxxxBSD family and Linux, now utilize the Pluggable Authentication Modules (PAM) facility to provide all authentication, authorization and resource control services. Prior to the introduction of PAM, a decision to use an alternative to the system password database (/etc/passwd) would require the provision of alternatives for all programs that provide security services. -Such a choice would involve provision of alternatives to such programs as: login, -passwd, chown, etc. +Such a choice would involve provision of alternatives to programs such as: login, +passwd, chown, and so on.

    PAM provides a mechanism that disconnects these security programs from the underlying -authentication/authorization infrastructure. PAM is configured either through one file -/etc/pam.conf (Solaris), or by editing individual files that are +authentication/authorization infrastructure. PAM is configured by making appropriate modifications to one file +/etc/pam.conf (Solaris), or by editing individual control files that are located in /etc/pam.d.

    -On PAM enabled UNIX/Linux systems it is an easy matter to configure the system to use any -authentication backend, so long as the appropriate dynamically loadable library modules -are available for it. The backend may be local to the system, or may be centralised on a +On PAM-enabled UNIX/Linux systems, it is an easy matter to configure the system to use any +authentication backend so long as the appropriate dynamically loadable library modules +are available for it. The backend may be local to the system, or may be centralized on a remote server.

    PAM support modules are available for: -

    /etc/passwd:

    +

    /etc/passwd

    There are several PAM modules that interact with this standard UNIX user - database. The most common are called: pam_unix.so, pam_unix2.so, pam_pwdb.so - and pam_userdb.so. -

    Kerberos:

    - The pam_krb5.so module allows the use of any Kerberos compliant server. + database. The most common are called: pam_unix.so, pam_unix2.so, pam_pwdb.so + and pam_userdb.so. +

    Kerberos

    + The pam_krb5.so module allows the use of any Kerberos compliant server. This tool is used to access MIT Kerberos, Heimdal Kerberos, and potentially Microsoft Active Directory (if enabled). -

    LDAP:

    - The pam_ldap.so module allows the use of any LDAP v2 or v3 compatible backend +

    LDAP

    + The pam_ldap.so module allows the use of any LDAP v2 or v3 compatible backend server. Commonly used LDAP backend servers include: OpenLDAP v2.0 and v2.1, Sun ONE iDentity server, Novell eDirectory server, Microsoft Active Directory. -

    NetWare Bindery:

    - The pam_ncp_auth.so module allows authentication off any bindery enabled - NetWare Core Protocol based server. -

    SMB Password:

    - This module, called pam_smbpass.so, will allow user authentication off +

    NetWare Bindery

    + The pam_ncp_auth.so module allows authentication off any bindery-enabled + NetWare Core Protocol-based server. +

    SMB Password

    + This module, called pam_smbpass.so, will allow user authentication off the passdb backend that is configured in the Samba smb.conf file. -

    SMB Server:

    - The pam_smb_auth.so module is the original MS Windows networking authentication +

    SMB Server

    + The pam_smb_auth.so module is the original MS Windows networking authentication tool. This module has been somewhat outdated by the Winbind module. -

    Winbind:

    - The pam_winbind.so module allows Samba to obtain authentication from any +

    Winbind

    + The pam_winbind.so module allows Samba to obtain authentication from any MS Windows Domain Controller. It can just as easily be used to authenticate - users for access to any PAM enabled application. -

    RADIUS:

    + users for access to any PAM-enabled application. +

    RADIUS

    There is a PAM RADIUS (Remote Access Dial-In User Service) authentication - module. In most cases the administrator will need to locate the source code + module. In most cases, administrators will need to locate the source code for this tool and compile and install it themselves. RADIUS protocols are used by many routers and terminal servers.

    -Of the above, Samba provides the pam_smbpasswd.so and the pam_winbind.so modules alone. +Of the above, Samba provides the pam_smbpasswd.so and the pam_winbind.so modules alone.

    Once configured, these permit a remarkable level of flexibility in the location and use -of distributed samba domain controllers that can provide wide are network bandwidth -efficient authentication services for PAM capable systems. In effect, this allows the -deployment of centrally managed and maintained distributed authentication from a single -user account database. -

    Technical Discussion

    +of distributed Samba Domain Controllers that can provide wide area network bandwidth +efficient authentication services for PAM-capable systems. In effect, this allows the +deployment of centrally managed and maintained distributed authentication from a +single-user account database. +

    Technical Discussion

    PAM is designed to provide the system administrator with a great deal of flexibility in configuration of the privilege granting applications of their system. The local configuration of system security controlled by PAM is contained in one of two places: -either the single system file, /etc/pam.conf; or the /etc/pam.d/ directory. -

    PAM Configuration Syntax

    +either the single system file, /etc/pam.conf, or the +/etc/pam.d/ directory. +

    PAM Configuration Syntax

    In this section we discuss the correct syntax of and generic options respected by entries to these files. -PAM specific tokens in the configuration file are case insensitive. The module paths, however, are case -sensitive since they indicate a file's name and reflect the case dependence of typical file-systems. +PAM-specific tokens in the configuration file are case insensitive. The module paths, however, are case +sensitive since they indicate a file's name and reflect the case +dependence of typical file systems. The case-sensitivity of the arguments to any given module is defined for each module in turn.

    In addition to the lines described below, there are two special characters provided for the convenience -of the system administrator: comments are preceded by a `#' and extend to the next end-of-line; also, -module specification lines may be extended with a `\' escaped newline. +of the system administrator: comments are preceded by a “#” and extend to the next end-of-line; also, +module specification lines may be extended with a “\” escaped newline.

    If the PAM authentication module (loadable link library file) is located in the -default location then it is not necessary to specify the path. In the case of +default location, then it is not necessary to specify the path. In the case of Linux, the default location is /lib/security. If the module -is located outside the default then the path must be specified as: +is located outside the default, then the path must be specified as:

     auth  required  /other_path/pam_strange_module.so
     

    -

    Anatomy of /etc/pam.d Entries

    +

    Anatomy of /etc/pam.d Entries

    The remaining information in this subsection was taken from the documentation of the Linux-PAM project. For more information on PAM, see -The Official Linux-PAM home page +The Official Linux-PAM home page.

    -A general configuration line of the /etc/pam.conf file has the following form: +A general configuration line of the /etc/pam.conf file has the following form:

     service-name   module-type   control-flag   module-path   args
    @@ -104,36 +107,38 @@ service-name   module-type   control-flag   module-path   args
     Below, we explain the meaning of each of these tokens. The second (and more recently adopted)
     way of configuring Linux-PAM is via the contents of the /etc/pam.d/ directory.
     Once we have explained the meaning of the above tokens, we will describe this method.
    -

    service-name:

    - The name of the service associated with this entry. Frequently the service name is the conventional - name of the given application. For example, `ftpd', `rlogind' and `su', etc. . +

    service-name

    + The name of the service associated with this entry. Frequently, the service name is the conventional + name of the given application. For example, ftpd, rlogind and + su, and so on.

    - There is a special service-name, reserved for defining a default authentication mechanism. It has - the name `OTHER' and may be specified in either lower or upper case characters. Note, when there - is a module specified for a named service, the `OTHER' entries are ignored. -

    module-type:

    + There is a special service-name reserved for defining a default authentication mechanism. It has + the name OTHER and may be specified in either lower- or upper-case characters. + Note, when there is a module specified for a named service, the OTHER + entries are ignored. +

    module-type

    One of (currently) four types of module. The four types are as follows:

    • - auth: this module type provides two aspects of authenticating the user. - Firstly, it establishes that the user is who they claim to be, by instructing the application + auth: This module type provides two aspects of authenticating the user. + It establishes that the user is who he claims to be by instructing the application to prompt the user for a password or other means of identification. Secondly, the module can grant group membership (independently of the /etc/groups file discussed above) or other privileges through its credential granting properties.

    • - account: this module performs non-authentication based account management. + account: This module performs non-authentication-based account management. It is typically used to restrict/permit access to a service based on the time of day, currently available system resources (maximum number of users) or perhaps the location of the applicant - user `root' login only on the console. + user “root” login only on the console.

    • - session: primarily, this module is associated with doing things that need - to be done for the user before/after they can be given service. Such things include the logging - of information concerning the opening/closing of some data exchange with a user, mounting - directories, etc. + session: Primarily, this module is associated with doing things that need + to be done for the user before and after they can be given service. Such things include the logging + of information concerning the opening and closing of some data exchange with a user, mounting + directories, and so on.

    • - password: this last module type is required for updating the authentication - token associated with the user. Typically, there is one module for each `challenge/response' - based authentication (auth) module-type. -

    control-flag:

    + password: This last module type is required for updating the authentication + token associated with the user. Typically, there is one module for each “challenge/response” + -based authentication (auth) module type. +

    control-flag

    The control-flag is used to indicate how the PAM library will react to the success or failure of the module it is associated with. Since modules can be stacked (modules of the same type execute in series, one after another), the control-flags determine the relative importance of each module. The application @@ -145,129 +150,135 @@ Once we have explained the meaning of the above tokens, we will describe this me

    The simpler (and historical) syntax for the control-flag is a single keyword defined to indicate the severity of concern associated with the success or failure of a specific module. There are four such - keywords: required, requisite, sufficient and optional. + keywords: required, requisite, sufficient and optional.

    The Linux-PAM library interprets these keywords in the following manner:

    • - required: this indicates that the success of the module is required for the + required: This indicates that the success of the module is required for the module-type facility to succeed. Failure of this module will not be apparent to the user until all of the remaining modules (of the same module-type) have been executed.

    • - requisite: like required, however, in the case that such a module returns a + requisite: Like required, however, in the case that such a module returns a failure, control is directly returned to the application. The return value is that associated with - the first required or requisite module to fail. Note, this flag can be used to protect against the + the first required or requisite module to fail. This flag can be used to protect against the possibility of a user getting the opportunity to enter a password over an unsafe medium. It is conceivable that such behavior might inform an attacker of valid accounts on a system. This possibility should be weighed against the not insignificant concerns of exposing a sensitive password in a hostile environment.

    • - sufficient: the success of this module is deemed `sufficient' to satisfy + sufficient: The success of this module is deemed sufficient to satisfy the Linux-PAM library that this module-type has succeeded in its purpose. In the event that no - previous required module has failed, no more `stacked' modules of this type are invoked. (Note, - in this case subsequent required modules are not invoked.). A failure of this module is not deemed + previous required module has failed, no more “stacked” modules of this type are invoked. + (In this case, subsequent required modules are not invoked). A failure of this module is not deemed as fatal to satisfying the application that this module-type has succeeded.

    • - optional: as its name suggests, this control-flag marks the module as not + optional: As its name suggests, this control-flag marks the module as not being critical to the success or failure of the user's application for service. In general, Linux-PAM ignores such a module when determining if the module stack will succeed or fail. However, in the absence of any definite successes or failures of previous or subsequent stacked - modules this module will determine the nature of the response to the application. One example of + modules, this module will determine the nature of the response to the application. One example of this latter case, is when the other modules return something like PAM_IGNORE.

    The more elaborate (newer) syntax is much more specific and gives the administrator a great deal of control over how the user is authenticated. This form of the control flag is delimited with square brackets and - consists of a series of value=action tokens: + consists of a series of value=action tokens:

     [value1=action1 value2=action2 ...]
     

    - Here, value1 is one of the following return values: success; open_err; symbol_err; service_err; - system_err; buf_err; perm_denied; auth_err; cred_insufficient; authinfo_unavail; user_unknown; maxtries; - new_authtok_reqd; acct_expired; session_err; cred_unavail; cred_expired; cred_err; no_module_data; conv_err; - authtok_err; authtok_recover_err; authtok_lock_busy; authtok_disable_aging; try_again; ignore; abort; - authtok_expired; module_unknown; bad_item; and default. The last of these (default) can be used to set - the action for those return values that are not explicitly defined. + Here, value1 is one of the following return values: +

    +success; open_err; symbol_err; service_err; system_err; buf_err;
    +perm_denied; auth_err; cred_insufficient; authinfo_unavail;
    +user_unknown; maxtries; new_authtok_reqd; acct_expired; session_err;
    +cred_unavail; cred_expired; cred_err; no_module_data; conv_err;
    +authtok_err; authtok_recover_err; authtok_lock_busy;
    +authtok_disable_aging; try_again; ignore; abort; authtok_expired;
    +module_unknown; bad_item; and default.
    +

    +

    + The last of these (default) can be used to set the action for those return values that are not explicitly defined.

    - The action1 can be a positive integer or one of the following tokens: ignore; ok; done; bad; die; and reset. + The action1 can be a positive integer or one of the following tokens: + ignore; ok; done; bad; die; and reset. A positive integer, J, when specified as the action, can be used to indicate that the next J modules of the current module-type will be skipped. In this way, the administrator can develop a moderately sophisticated stack of modules with a number of different paths of execution. Which path is taken can be determined by the reactions of individual modules.

    • - ignore: when used with a stack of modules, the module's return status will not + ignore: When used with a stack of modules, the module's return status will not contribute to the return code the application obtains.

    • - bad: this action indicates that the return code should be thought of as indicative + bad: This action indicates that the return code should be thought of as indicative of the module failing. If this module is the first in the stack to fail, its status value will be used for that of the whole stack.

    • - die: equivalent to bad with the side effect of terminating the module stack and + die: Equivalent to bad with the side effect of terminating the module stack and PAM immediately returning to the application.

    • - ok: this tells PAM that the administrator thinks this return code should + ok: This tells PAM that the administrator thinks this return code should contribute directly to the return code of the full stack of modules. In other words, if the former state of the stack would lead to a return of PAM_SUCCESS, the module's return code will override this value. Note, if the former state of the stack holds some value that is indicative of a modules - failure, this 'ok' value will not be used to override that value. + failure, this ok value will not be used to override that value.

    • - done: equivalent to ok with the side effect of terminating the module stack and + done: Equivalent to ok with the side effect of terminating the module stack and PAM immediately returning to the application.

    • - reset: clear all memory of the state of the module stack and start again with + reset: Clears all memory of the state of the module stack and starts again with the next stacked module.

    - Each of the four keywords: required; requisite; sufficient; and optional, have an equivalent expression in - terms of the [...] syntax. They are as follows: + Each of the four keywords: required; requisite; sufficient; and optional, + have an equivalent expression in terms of the [...] syntax. They are as follows:

    • - required is equivalent to [success=ok new_authtok_reqd=ok ignore=ignore default=bad] + required is equivalent to [success=ok new_authtok_reqd=ok ignore=ignore default=bad].

    • - requisite is equivalent to [success=ok new_authtok_reqd=ok ignore=ignore default=die] + requisite is equivalent to [success=ok new_authtok_reqd=ok ignore=ignore default=die].

    • - sufficient is equivalent to [success=done new_authtok_reqd=done default=ignore] + sufficient is equivalent to [success=done new_authtok_reqd=done default=ignore].

    • - optional is equivalent to [success=ok new_authtok_reqd=ok default=ignore] + optional is equivalent to [success=ok new_authtok_reqd=ok default=ignore].

    Just to get a feel for the power of this new syntax, here is a taste of what you can do with it. With Linux-PAM-0.63, the notion of client plug-in agents was introduced. This is something that makes it possible for PAM to support machine-machine authentication using the transport protocol inherent to the client/server application. With the - [ ... value=action ... ] control syntax, it is possible for an application to be configured + [ ... value=action ... ] control syntax, it is possible for an application to be configured to support binary prompts with compliant clients, but to gracefully fall over into an alternative authentication - mode for older, legacy, applications. -

    module-path:

    + mode for older, legacy applications. +

    module-path

    The path-name of the dynamically loadable object file; the pluggable module itself. If the first character of the - module path is `/', it is assumed to be a complete path. If this is not the case, the given module path is appended + module path is “/”, it is assumed to be a complete path. If this is not the case, the given module path is appended to the default module path: /lib/security (but see the notes above).

    - The args are a list of tokens that are passed to the module when it is invoked. Much like arguments to a typical + The arguments are a list of tokens that are passed to the module when it is invoked, much like arguments to a typical Linux shell command. Generally, valid arguments are optional and are specific to any given module. Invalid arguments are ignored by a module, however, when encountering an invalid argument, the module is required to write an error - to syslog(3). For a list of generic options see the next section. + to syslog(3). For a list of generic options, see the next section.

    - Note, if you wish to include spaces in an argument, you should surround that argument with square brackets. For example: + If you wish to include spaces in an argument, you should surround that argument with square brackets. For example:

     squid auth required pam_mysql.so user=passwd_query passwd=mada \
    -        db=eminence [query=select user_name from internet_service where \
    -                     user_name='%u' and password=PASSWORD('%p') and \
    -                     service='web_proxy']
    +db=eminence [query=select user_name from internet_service where \
    +user_name=“%u” and password=PASSWORD(“%p”) and service=“web_proxy”]
     

    - Note, when using this convention, you can include `[' characters inside the string, and if you wish to include a `]' - character inside the string that will survive the argument parsing, you should use `\['. In other words: + When using this convention, you can include “[” characters inside the string, and if you wish to have a “]” + character inside the string that will survive the argument parsing, you should use “\[”. In other words:

     [..[..\]..]    -->   ..[..]..
     

    - Any line in (one of) the configuration file(s), that is not formatted correctly, will generally tend (erring on the + Any line in one of the configuration files that is not formatted correctly will generally tend (erring on the side of caution) to make the authentication process fail. A corresponding error is written to the system log files with a call to syslog(3). -

    Example System Configurations

    +

    Example System Configurations

    The following is an example /etc/pam.d/login configuration file. -This example had all options been uncommented is probably not usable -as it stacks many conditions before allowing successful completion +This example had all options uncommented and is probably not usable +because it stacks many conditions before allowing successful completion of the login process. Essentially all conditions can be disabled -by commenting them out except the calls to pam_pwdb.so. -

    PAM: original login config

    +by commenting them out, except the calls to pam_pwdb.so.
    +

    PAM: Original Login Config

     #%PAM-1.0
    -# The PAM configuration file for the `login' service
    +# The PAM configuration file for the “login” service
     #
     auth         required    pam_securetty.so
     auth         required    pam_nologin.so
    @@ -280,7 +291,7 @@ session      required    pam_pwdb.so
     # session    optional    pam_lastlog.so
     # password   required    pam_cracklib.so retry=3
     password     required    pam_pwdb.so shadow md5
    -

    PAM: login using pam_smbpass

    +

    PAM: Login Using pam_smbpass

    PAM allows use of replaceable modules. Those available on a sample system include:

    $/bin/ls /lib/security

    @@ -291,17 +302,17 @@ pam_nologin.so   pam_rootok.so       pam_tally.so
     pam_deny.so      pam_issue.so        pam_mail.so       
     pam_permit.so    pam_securetty.so    pam_time.so       
     pam_dialup.so    pam_lastlog.so      pam_mkhomedir.so  
    -pam_pwdb.so      pam_shells.so       pam_unix.so       
    +pam_pwdb.so      pam_shells.so       pam_UNIX.so       
     pam_env.so       pam_ldap.so         pam_motd.so       
    -pam_radius.so    pam_smbpass.so      pam_unix_acct.so  
    -pam_wheel.so     pam_unix_auth.so    pam_unix_passwd.so
    -pam_userdb.so    pam_warn.so         pam_unix_session.so
    +pam_radius.so    pam_smbpass.so      pam_UNIX_acct.so  
    +pam_wheel.so     pam_UNIX_auth.so    pam_UNIX_passwd.so
    +pam_userdb.so    pam_warn.so         pam_UNIX_session.so
     

    The following example for the login program replaces the use of -the pam_pwdb.so module which uses the system +the pam_pwdb.so module that uses the system password database (/etc/passwd, /etc/shadow, /etc/group) with -the module pam_smbpass.so which uses the Samba +the module pam_smbpass.so, which uses the Samba database which contains the Microsoft MD4 encrypted password hashes. This database is stored in either /usr/local/samba/private/smbpasswd, @@ -311,13 +322,13 @@ Samba implementation for your UNIX/Linux system. The pam_smbpass.so module is provided by Samba version 2.2.1 or later. It can be compiled by specifying the --with-pam_smbpass options when running Samba's -configure script. For more information +configure script. For more information on the pam_smbpass module, see the documentation in the source/pam_smbpass directory of the Samba source distribution.

     #%PAM-1.0
    -# The PAM configuration file for the `login' service
    +# The PAM configuration file for the “login” service
     #
     auth        required    pam_smbpass.so nodelay
     account     required    pam_smbpass.so nodelay
    @@ -328,21 +339,21 @@ The following is the PAM configuration file for a particular
     Linux system. The default condition uses pam_pwdb.so.
     

     #%PAM-1.0
    -# The PAM configuration file for the `samba' service
    +# The PAM configuration file for the “samba” service
     #
     auth       required     pam_pwdb.so nullok nodelay shadow audit
     account    required     pam_pwdb.so audit nodelay
     session    required     pam_pwdb.so nodelay
     password   required     pam_pwdb.so shadow md5
     

    -In the following example the decision has been made to use the -smbpasswd database even for basic samba authentication. Such a -decision could also be made for the passwd program and would -thus allow the smbpasswd passwords to be changed using the passwd -program. +In the following example, the decision has been made to use the +smbpasswd database even for basic Samba authentication. Such a +decision could also be made for the passwd program and would +thus allow the smbpasswd passwords to be changed using the +passwd program:

     #%PAM-1.0
    -# The PAM configuration file for the `samba' service
    +# The PAM configuration file for the “samba” service
     #
     auth       required     pam_smbpass.so nodelay
     account    required     pam_pwdb.so audit nodelay
    @@ -355,128 +366,118 @@ your particular system implementation for details regarding the specific
     capabilities of PAM in this environment. Some Linux implementations also 
     provide the pam_stack.so module that allows all 
     authentication to be configured in a single central file. The 
    -pam_stack.so method has some very devoted followers 
    +pam_stack.so method has some devoted followers 
     on the basis that it allows for easier administration. As with all issues in 
    -life though, every decision makes trade-offs, so you may want examine the 
    +life though, every decision makes trade-offs, so you may want to examine the 
     PAM documentation for further helpful information.
    -

    smb.conf PAM Configuration

    - There is an option in smb.conf called obey pam restrictions. -The following is from the on-line help for this option in SWAT; +

    smb.conf PAM Configuration

    + There is an option in smb.conf called obey pam restrictions. +The following is from the online help for this option in SWAT;

    -When Samba is configured to enable PAM support (i.e. ---with-pam), this parameter will -control whether or not Samba should obey PAM's account -and session management directives. The default behavior -is to use PAM for clear text authentication only and to -ignore any account or session management. Note that Samba always -ignores PAM for authentication in the case of -encrypt passwords = yes. -The reason is that PAM modules cannot support the challenge/response -authentication mechanism needed in the presence of SMB +When Samba is configured to enable PAM support (i.e., --with-pam), this parameter will +control whether or not Samba should obey PAM's account and session management directives. The default behavior +is to use PAM for cleartext authentication only and to ignore any account or session management. Samba always +ignores PAM for authentication in the case of encrypt passwords = yes. +The reason is that PAM modules cannot support the challenge/response authentication mechanism needed in the presence of SMB password encryption. -

    Default: obey pam restrictions = no

    Remote CIFS Authentication using winbindd.so

    +

    Default: obey pam restrictions = no

    Remote CIFS Authentication Using winbindd.so

    All operating systems depend on the provision of users credentials acceptable to the platform. UNIX requires the provision of a user identifier (UID) as well as a group identifier (GID). These are both simple integer type numbers that are obtained from a password backend such as /etc/passwd.

    -Users and groups on a Windows NT server are assigned a relative id (rid) which is unique for +Users and groups on a Windows NT server are assigned a relative ID (RID) which is unique for the domain when the user or group is created. To convert the Windows NT user or group into -a unix user or group, a mapping between rids and unix user and group ids is required. This +a UNIX user or group, a mapping between RIDs and UNIX user and group IDs is required. This is one of the jobs that winbind performs.

    -As winbind users and groups are resolved from a server, user and group ids are allocated +As Winbind users and groups are resolved from a server, user and group IDs are allocated from a specified range. This is done on a first come, first served basis, although all existing users and groups will be mapped as soon as a client performs a user or group -enumeration command. The allocated unix ids are stored in a database file under the Samba +enumeration command. The allocated UNIX IDs are stored in a database file under the Samba lock directory and will be remembered.

    The astute administrator will realize from this that the combination of pam_smbpass.so, -winbindd, and a distributed passdb backend, such as ldap, will allow the establishment of a -centrally managed, distributed user/password database that can also be used by all PAM (eg: Linux) aware -programs and applications. This arrangement can have particularly potent advantages compared with the use of -Microsoft Active Directory Service (ADS) in so far as reduction of wide area network authentication traffic. +winbindd and a distributed passdb backend, +such as ldap, will allow the establishment of a centrally managed, distributed user/password +database that can also be used by all PAM-aware (e.g., Linux) programs and applications. This arrangement can have +particularly potent advantages compared with the use of Microsoft Active Directory Service (ADS) in so far as +the reduction of wide area network authentication traffic.

    Warning

    -The rid to unix id database is the only location where the user and group mappings are -stored by winbindd. If this file is deleted or corrupted, there is no way for winbindd -to determine which user and group ids correspond to Windows NT user and group rids. -

    Password Synchronization using pam_smbpass.so

    -pam_smbpass is a PAM module which can be used on conforming systems to -keep the smbpasswd (Samba password) database in sync with the unix +The RID to UNIX ID database is the only location where the user and group mappings are +stored by winbindd. If this file is deleted or corrupted, there is no way for winbindd +to determine which user and group IDs correspond to Windows NT user and group RIDs. +

    Password Synchronization Using pam_smbpass.so

    +pam_smbpass is a PAM module that can be used on conforming systems to +keep the smbpasswd (Samba password) database in sync with the UNIX password file. PAM (Pluggable Authentication Modules) is an API supported -under some Unices, such as Solaris, HPUX and Linux, that provides a +under some UNIX operating systems, such as Solaris, HPUX and Linux, that provides a generic interface to authentication mechanisms.

    -This module authenticates a local smbpasswd user database. If you require -support for authenticating against a remote SMB server, or if you're -concerned about the presence of suid root binaries on your system, it is -recommended that you use pam_winbind instead. -

    -Options recognized by this module are as follows: -

    Table 25.1. Options recognized by pam_smbpass

    debuglog more debugging info
    auditlike debug, but also logs unknown usernames
    use_first_passdon't prompt the user for passwords; take them from PAM_ items instead
    try_first_passtry to get the password from a previous PAM module, fall back to prompting the user
    use_authtoklike try_first_pass, but *fail* if the new PAM_AUTHTOK has not been previously set. (intended for stacking password modules only)
    not_set_passdon't make passwords used by this module available to other modules.
    nodelaydon't insert ~1 second delays on authentication failure.
    nulloknull passwords are allowed.
    nonullnull passwords are not allowed. Used to override the Samba configuration.
    migrateonly meaningful in an "auth" context; used to update smbpasswd file with a password used for successful authentication.
    smbconf=filespecify an alternate path to the smb.conf file.

    +This module authenticates a local smbpasswd user database. If you require +support for authenticating against a remote SMB server, or if you are +concerned about the presence of SUID root binaries on your system, it is +recommended that you use pam_winbind instead.

    -

    • Andrew Morgan, for providing the Linux-PAM - framework, without which none of this would have happened

    • Christian Gafton and Andrew Morgan again, for the - pam_pwdb module upon which pam_smbpass was originally based

    • Luke Leighton for being receptive to the idea, - and for the occasional good-natured complaint about the project's status - that keep me working on it :)

    . +Options recognized by this module are shown in . +

    Table 25.1. Options recognized by pam_smbpass

    debuglog more debugging info.
    auditlike debug, but also logs unknown usernames.
    use_first_passdo not prompt the user for passwords; take them from PAM_ items instead.
    try_first_passtry to get the password from a previous PAM module fall back to prompting the user.
    use_authtoklike try_first_pass, but *fail* if the new PAM_AUTHTOK has not been previously set (intended for stacking password modules only).
    not_set_passdo not make passwords used by this module available to other modules.
    nodelaydo not insert ~1 second delays on authentication failure.
    nulloknull passwords are allowed.
    nonullnull passwords are not allowed. Used to override the Samba configuration.
    migrateonly meaningful in an “auth” context; used to update smbpasswd file with a password used for successful authentication.
    smbconf=filespecify an alternate path to the smb.conf file.

    -The following are examples of the use of pam_smbpass.so in the format of Linux +The following are examples of the use of pam_smbpass.so in the format of Linux /etc/pam.d/ files structure. Those wishing to implement this tool on other platforms will need to adapt this appropriately. -

    Password Synchronisation Configuration

    +

    Password Synchronization Configuration

    A sample PAM configuration that shows the use of pam_smbpass to make -sure private/smbpasswd is kept in sync when /etc/passwd (/etc/shadow) -is changed. Useful when an expired password might be changed by an -application (such as ssh). +sure private/smbpasswd is kept in sync when /etc/passwd (/etc/shadow) +is changed. Useful when an expired password might be changed by an +application (such as ssh).

     #%PAM-1.0
     # password-sync
     #
     auth       requisite    pam_nologin.so
    -auth       required     pam_unix.so
    -account    required     pam_unix.so
    +auth       required     pam_UNIX.so
    +account    required     pam_UNIX.so
     password   requisite    pam_cracklib.so retry=3
    -password   requisite    pam_unix.so shadow md5 use_authtok try_first_pass
    +password   requisite    pam_UNIX.so shadow md5 use_authtok try_first_pass
     password   required     pam_smbpass.so nullok use_authtok try_first_pass
    -session    required     pam_unix.so
    -

    Password Migration Configuration

    -A sample PAM configuration that shows the use of pam_smbpass to migrate -from plaintext to encrypted passwords for Samba. Unlike other methods, +session required pam_UNIX.so +

    Password Migration Configuration

    +A sample PAM configuration that shows the use of pam_smbpass to migrate +from plaintext to encrypted passwords for Samba. Unlike other methods, this can be used for users who have never connected to Samba shares: -password migration takes place when users ftp in, login using ssh, pop -their mail, etc. +password migration takes place when users ftp in, login using ssh, pop +their mail, and so on.

     #%PAM-1.0
     # password-migration
     #
     auth       requisite   pam_nologin.so
    -# pam_smbpass is called IF pam_unix succeeds.
    -auth       requisite   pam_unix.so
    +# pam_smbpass is called IF pam_UNIX succeeds.
    +auth       requisite   pam_UNIX.so
     auth       optional    pam_smbpass.so migrate
    -account    required    pam_unix.so
    +account    required    pam_UNIX.so
     password   requisite   pam_cracklib.so retry=3
    -password   requisite   pam_unix.so shadow md5 use_authtok try_first_pass
    +password   requisite   pam_UNIX.so shadow md5 use_authtok try_first_pass
     password   optional    pam_smbpass.so nullok use_authtok try_first_pass
    -session    required    pam_unix.so
    -

    Mature Password Configuration

    -A sample PAM configuration for a 'mature' smbpasswd installation. -private/smbpasswd is fully populated, and we consider it an error if -the smbpasswd doesn't exist or doesn't match the UNIX password. +session required pam_UNIX.so +

    Mature Password Configuration

    +A sample PAM configuration for a mature smbpasswd installation. +private/smbpasswd is fully populated, and we consider it an error if +the SMB password does not exist or does not match the UNIX password.

     #%PAM-1.0
     # password-mature
     #
     auth       requisite    pam_nologin.so
    -auth       required     pam_unix.so
    -account    required     pam_unix.so
    +auth       required     pam_UNIX.so
    +account    required     pam_UNIX.so
     password   requisite    pam_cracklib.so retry=3
    -password   requisite    pam_unix.so shadow md5 use_authtok try_first_pass
    +password   requisite    pam_UNIX.so shadow md5 use_authtok try_first_pass
     password   required     pam_smbpass.so use_authtok use_first_pass
    -session    required     pam_unix.so
    -

    Kerberos Password Integration Configuration

    -A sample PAM configuration that shows pam_smbpass used together with -pam_krb5. This could be useful on a Samba PDC that is also a member of +session required pam_UNIX.so +

    Kerberos Password Integration Configuration

    +A sample PAM configuration that shows pam_smbpass used together with +pam_krb5. This could be useful on a Samba PDC that is also a member of a Kerberos realm.

     #%PAM-1.0
    @@ -490,44 +491,40 @@ password   requisite   pam_cracklib.so retry=3
     password   optional    pam_smbpass.so nullok use_authtok try_first_pass
     password   required    pam_krb5.so use_authtok try_first_pass
     session    required    pam_krb5.so
    -

    Common Errors

    -PAM can be a very fickle and sensitive to configuration glitches. Here we look at a few cases from +

    Common Errors

    +PAM can be fickle and sensitive to configuration glitches. Here we look at a few cases from the Samba mailing list. -

    pam_winbind problem

    - “ - I have the following PAM configuration: - ” +

    pam_winbind Problem

    + A user reported: I have the following PAM configuration:

     auth required /lib/security/pam_securetty.so
     auth sufficient /lib/security/pam_winbind.so
    -auth sufficient /lib/security/pam_unix.so use_first_pass nullok
    +auth sufficient /lib/security/pam_UNIX.so use_first_pass nullok
     auth required /lib/security/pam_stack.so service=system-auth
     auth required /lib/security/pam_nologin.so
     account required /lib/security/pam_stack.so service=system-auth
     account required /lib/security/pam_winbind.so
     password required /lib/security/pam_stack.so service=system-auth
     

    +

    + When I open a new console with [ctrl][alt][F1], I can't log in with my user “pitie”. + I have tried with user “scienceu+pitie” also.

    - “ - When I open a new console with [ctrl][alt][F1], then I cant log in with my user "pitie". - I've tried with user "scienceu+pitie" also. -” -

    - The problem may lie with your inclusion of pam_stack.so + Answer: The problem may lie with your inclusion of pam_stack.so service=system-auth. That file often contains a lot of stuff that may - duplicate what you're already doing. Try commenting out the pam_stack lines - for auth and account and see if things work. If they do, look at + duplicate what you are already doing. Try commenting out the pam_stack lines + for auth and account and see if things work. If they do, look at /etc/pam.d/system-auth and copy only what you need from it into your - /etc/pam.d/login file. Alternatively, if you want all services to use - winbind, you can put the winbind-specific stuff in /etc/pam.d/system-auth. -

    Winbind is not resolving users and groups

    - “ - My smb.conf file is correctly configured. I have specified - idmap uid = 12000, - and idmap gid = 3000-3500 + /etc/pam.d/login file. Alternately, if you want all services to use + Winbind, you can put the Winbind-specific stuff in /etc/pam.d/system-auth. +

    Winbind Is Not Resolving Users and Groups

    + “ + My smb.conf file is correctly configured. I have specified + idmap uid = 12000, + and idmap gid = 3000-3500 and winbind is running. When I do the following it all works fine. -” + ”

     root# wbinfo -u
     MIDEARTH+maryo
    @@ -550,16 +547,14 @@ bin:x:1:1:bin:/bin:/bin/bash
     maryo:x:15000:15003:Mary Orville:/home/MIDEARTH/maryo:/bin/false
     

    - But the following command just fails: -” + But this command fails: + ”

    -root# chown 'maryo' a_file
    -chown: `maryo': invalid user
    +root# chown maryo a_file
    +chown: 'maryo': invalid user
     

    -“ -This is driving me nuts! What can be wrong? -” + “This is driving me nuts! What can be wrong?

    - Your system is likely running nscd, the name service - caching daemon. Shut it down, do NOT restart it! You will find your problem resolved. -

    + Answer: Your system is likely running nscd, the name service + caching daemon. Shut it down, do not restart it! You will find your problem resolved. +

    diff --git a/docs/htmldocs/passdb.html b/docs/htmldocs/passdb.html index 4d5432fd70..fbfcd560da 100644 --- a/docs/htmldocs/passdb.html +++ b/docs/htmldocs/passdb.html @@ -1,223 +1,258 @@ -Chapter 11. Account Information Databases

    Chapter 11. Account Information Databases

    Jelmer R. Vernooij

    The Samba Team

    Gerald (Jerry) Carter

    Samba Team

    Jeremy Allison

    Samba Team

    John H. Terpstra

    Samba Team

    Olivier (lem) Lemaire

    May 24, 2003

    -Samba 3 implements a new capability to work concurrently with multiple account backends. -The possible new combinations of password backends allows Samba 3 a degree of flexibility +Chapter 11. Account Information Databases

    Chapter 11. Account Information Databases

    Jelmer R. Vernooij

    The Samba Team

    John H. Terpstra

    Samba Team

    Gerald (Jerry) Carter

    Samba Team

    Jeremy Allison

    Samba Team

    Guenther Deschner

    LDAP updates

    Olivier (lem) Lemaire

    May 24, 2003

    +Samba-3 implements a new capability to work concurrently with multiple account backends. +The possible new combinations of password backends allows Samba-3 a degree of flexibility and scalability that previously could be achieved only with MS Windows Active Directory. This chapter describes the new functionality and how to get the most out of it.

    -In the course of development of Samba-3, a number of requests were received to provide the +In the development of Samba-3, a number of requests were received to provide the ability to migrate MS Windows NT4 SAM accounts to Samba-3 without the need to provide -matching UNIX/Linux accounts. We called this the Non UNIX Accounts (NUA) +matching UNIX/Linux accounts. We called this the Non-UNIX Accounts (NUA) capability. The intent was that an administrator could decide to use the tdbsam -backend and by simply specifying passdb backend = tdbsam_nua +backend and by simply specifying passdb backend = tdbsam_nua, this would allow Samba-3 to implement a solution that did not use UNIX accounts per se. Late in the development cycle, the team doing this work hit upon some obstacles that prevents this -solution from being used. Given the delays with Samba-3 release a decision was made to NOT -deliver this functionality until a better method of recognising NT Group SIDs from NT User -SIDs could be found. This feature may thus return during the life cycle for the Samba-3 series. +solution from being used. Given the delays with the Samba-3 release, a decision was made to not +deliver this functionality until a better method of recognizing NT Group SIDs from NT User +SIDs could be found. This feature may return during the life cycle for the Samba-3 series.

    Note

    -Samba-3 does NOT support Non-UNIX Account (NUA) operation for user accounts. +Samba-3 does not support Non-UNIX Account (NUA) operation for user accounts. Samba-3 does support NUA operation for machine accounts. -

    Features and Benefits

    -Samba-3 provides for complete backwards compatibility with Samba-2.2.x functionality +

    Features and Benefits

    +Samba-3 provides for complete backward compatibility with Samba-2.2.x functionality as follows: -

    Backwards Compatibility Backends

    Plain Text:

    + + + +

    Backward Compatibility Backends

    Plain Text

    This option uses nothing but the UNIX/Linux /etc/passwd - style back end. On systems that have PAM (Pluggable Authentication Modules) - support all PAM modules are supported. The behaviour is just as it was with + style backend. On systems that have Pluggable Authentication Modules (PAM) + support, all PAM modules are supported. The behavior is just as it was with Samba-2.2.x, and the protocol limitations imposed by MS Windows clients - apply likewise. -

    smbpasswd:

    - This option allows continues use of the smbpasswd + apply likewise. Please refer to for more information + regarding the limitations of Plain Text password usage. +

    smbpasswd

    + This option allows continued use of the smbpasswd file that maintains a plain ASCII (text) layout that includes the MS Windows LanMan and NT encrypted passwords as well as a field that stores some - account information. This form of password backend does NOT store any of - the MS Windows NT/200x SAM (Security Account Manager) information needed to + account information. This form of password backend does not store any of + the MS Windows NT/200x SAM (Security Account Manager) information required to provide the extended controls that are needed for more comprehensive - interoperation with MS Windows NT4 / 200x servers. + interoperation with MS Windows NT4/200x servers.

    - This backend should be used only for backwards compatibility with older + This backend should be used only for backward compatibility with older versions of Samba. It may be deprecated in future releases. -

    ldapsam_compat (Samba-2.2 LDAP Compatibility):

    +

    ldapsam_compat (Samba-2.2 LDAP Compatibility)

    There is a password backend option that allows continued operation with - a existing OpenLDAP backend that uses the Samba-2.2.x LDAP schema extension. + an existing OpenLDAP backend that uses the Samba-2.2.x LDAP schema extension. This option is provided primarily as a migration tool, although there is - no reason to force migration at this time. Note that this tool will eventually + no reason to force migration at this time. This tool will eventually be deprecated. -

    New Backends

    -Samba-3 introduces the following new password backend capabilities: -

    tdbsam:

    +

    +Samba-3 introduces a number of new password backend capabilities. + + + + +

    New Backends

    tdbsam

    This backend provides a rich database backend for local servers. This - backend is NOT suitable for multiple domain controller (ie: PDC + one + backend is not suitable for multiple Domain Controllers (i.e., PDC + one or more BDC) installations.

    The tdbsam password backend stores the old - smbpasswd information PLUS the extended MS Windows NT / 200x + smbpasswd information plus the extended MS Windows NT / 200x SAM information into a binary format TDB (trivial database) file. The inclusion of the extended information makes it possible for Samba-3 to implement the same account and system access controls that are possible - with MS Windows NT4 and MS Windows 200x based systems. + with MS Windows NT4/200x-based systems.

    The inclusion of the tdbsam capability is a direct response to user requests to allow simple site operation without the overhead of the complexities of running OpenLDAP. It is recommended to use this only - for sites that have fewer than 250 users. For larger sites or implementations + for sites that have fewer than 250 users. For larger sites or implementations, the use of OpenLDAP or of Active Directory integration is strongly recommended. -

    ldapsam:

    +

    ldapsam

    This provides a rich directory backend for distributed account installation.

    Samba-3 has a new and extended LDAP implementation that requires configuration - of OpenLDAP with a new format samba schema. The new format schema file is + of OpenLDAP with a new format Samba schema. The new format schema file is included in the examples/LDAP directory of the Samba distribution.

    The new LDAP implementation significantly expands the control abilities that were possible with prior versions of Samba. It is now possible to specify - "per user" profile settings, home directories, account access controls, and - much more. Corporate sites will see that the Samba-Team has listened to their + “per user” profile settings, home directories, account access controls, and + much more. Corporate sites will see that the Samba Team has listened to their requests both for capability and to allow greater scalability. -

    mysqlsam (MySQL based backend):

    - It is expected that the MySQL based SAM will be very popular in some corners. - This database backend will be on considerable interest to sites that want to +

    mysqlsam (MySQL based backend)

    + It is expected that the MySQL-based SAM will be very popular in some corners. + This database backend will be of considerable interest to sites that want to leverage existing MySQL technology. -

    xmlsam (XML based datafile):

    +

    xmlsam (XML based datafile)

    + Allows the account and password data to be stored in an XML format - data file. This backend can not be used for normal operation, it can only + data file. This backend cannot be used for normal operation, it can only be used in conjunction with pdbedit's pdb2pdb functionality. The DTD that is used might be subject to changes in the future.

    - The xmlsam option can be useful for account migration between database + The xmlsam option can be useful for account migration between database backends or backups. Use of this tool will allow the data to be edited before migration into another backend format. -

    Technical Information

    - Old windows clients send plain text passwords over the wire. Samba can check these - passwords by crypting them and comparing them to the hash stored in the unix user database. +

    Technical Information

    + Old Windows clients send plain text passwords over the wire. Samba can check these + passwords by encrypting them and comparing them to the hash stored in the UNIX user database.

    - Newer windows clients send encrypted passwords (so-called Lanman and NT hashes) over + + Newer Windows clients send encrypted passwords (so-called Lanman and NT hashes) over the wire, instead of plain text passwords. The newest clients will send only encrypted passwords and refuse to send plain text passwords, unless their registry is tweaked.

    - These passwords can't be converted to unix style encrypted passwords. Because of that, - you can't use the standard unix user database, and you have to store the Lanman and NT + These passwords can't be converted to UNIX-style encrypted passwords. Because of that, + you can't use the standard UNIX user database, and you have to store the Lanman and NT hashes somewhere else.

    - In addition to differently encrypted passwords, windows also stores certain data for each - user that is not stored in a unix user database. e.g: workstations the user may logon from, - the location where the users' profile is stored, and so on. Samba retrieves and stores this - information using a passdb backend. Commonly available backends are LDAP, plain text - file, MySQL and nisplus. For more information, see the man page for smb.conf regarding the - passdb backend parameter. -

    Figure 11.1. IDMAP

    IDMAP

    Important Notes About Security

    - The unix and SMB password encryption techniques seem similar on the surface. This - similarity is, however, only skin deep. The unix scheme typically sends clear text + In addition to differently encrypted passwords, Windows also stores certain data for each + user that is not stored in a UNIX user database. For example, workstations the user may logon from, + the location where the user's profile is stored, and so on. Samba retrieves and stores this + information using a passdb backend. Commonly available backends are LDAP, plain text + file, and MySQL. For more information, see the man page for smb.conf regarding the + passdb backend parameter. +

    Figure 11.1. IDMAP: Resolution of SIDs to UIDs.

    IDMAP: Resolution of SIDs to UIDs.

    + + The resolution of SIDs to UIDs is fundamental to correct operation of Samba. In both cases shown, if winbindd is not running, or cannot + be contacted, then only local SID/UID resolution is possible. See and + . +

    Figure 11.2. IDMAP: Resolution of UIDs to SIDs.

    IDMAP: Resolution of UIDs to SIDs.

    Important Notes About Security

    + The UNIX and SMB password encryption techniques seem similar on the surface. This + similarity is, however, only skin deep. The UNIX scheme typically sends cleartext passwords over the network when logging in. This is bad. The SMB encryption scheme never sends the cleartext password over the network but it does store the 16 byte hashed values on disk. This is also bad. Why? Because the 16 byte hashed values - are a "password equivalent". You cannot derive the user's password from them, but + are a “password equivalent.” You cannot derive the user's password from them, but they could potentially be used in a modified client to gain access to a server. This would require considerable technical knowledge on behalf of the attacker but - is perfectly possible. You should thus treat the data stored in whatever passdb - backend you use (smbpasswd file, ldap, mysql) as though it contained the cleartext - passwords of all your users. Its contents must be kept secret, and the file should + is perfectly possible. You should thus treat the datastored in whatever passdb + backend you use (smbpasswd file, LDAP, MYSQL) as though it contained the cleartext + passwords of all your users. Its contents must be kept secret and the file should be protected accordingly.

    - Ideally we would like a password scheme that involves neither plain text passwords - on the net nor on disk. Unfortunately this is not available as Samba is stuck with - having to be compatible with other SMB systems (WinNT, WfWg, Win95 etc). + Ideally, we would like a password scheme that involves neither plain text passwords + on the network nor on disk. Unfortunately, this is not available as Samba is stuck with + having to be compatible with other SMB systems (Windows NT, Windows for Workgroups, Windows 9x/Me).

    - Windows NT 4.0 Service pack 3 changed the default setting so that plaintext passwords + Windows NT 4.0 Service Pack 3 changed the default setting so plaintext passwords are disabled from being sent over the wire. This mandates either the use of encrypted - password support or edit the Windows NT registry to re-enable plaintext passwords. + password support or editing the Windows NT registry to re-enable plaintext passwords.

    - The following versions of MS Windows do not support full domain security protocols, + The following versions of Microsoft Windows do not support full domain security protocols, although they may log onto a domain environment: -

    • MS DOS Network client 3.0 with the basic network redirector installed

    • Windows 95 with the network redirector update installed

    • Windows 98 [se]

    • Windows Me

    Note

    - MS Windows XP Home does not have facilities to become a domain member and it can - not participate in domain logons. +

    • MS DOS Network client 3.0 with the basic network redirector installed.
    • Windows 95 with the network redirector update installed.
    • Windows 98 [Second Edition].
    • Windows Me.

    Note

    + MS Windows XP Home does not have facilities to become a Domain Member and it cannot participate in domain logons.

    The following versions of MS Windows fully support domain security protocols. -

    • Windows NT 3.5x

    • Windows NT 4.0

    • Windows 2000 Professional

    • Windows 200x Server/Advanced Server

    • Windows XP Professional

    - All current release of Microsoft SMB/CIFS clients support authentication via the - SMB Challenge/Response mechanism described here. Enabling clear text authentication +

    • Windows NT 3.5x.
    • Windows NT 4.0.
    • Windows 2000 Professional.
    • Windows 200x Server/Advanced Server.
    • Windows XP Professional.

    + All current releases of Microsoft SMB/CIFS clients support authentication via the + SMB Challenge/Response mechanism described here. Enabling cleartext authentication does not disable the ability of the client to participate in encrypted authentication. - Instead, it allows the client to negotiate either plain text _or_ encrypted password + Instead, it allows the client to negotiate either plain text or encrypted password handling.

    MS Windows clients will cache the encrypted password alone. Where plain text passwords - are re-enabled, through the appropriate registry change, the plain text password is NEVER + are re-enabled through the appropriate registry change, the plain text password is never cached. This means that in the event that a network connections should become disconnected - (broken) only the cached (encrypted) password will be sent to the resource server to - affect a auto-reconnect. If the resource server does not support encrypted passwords the - auto-reconnect will fail. USE OF ENCRYPTED PASSWORDS IS STRONGLY ADVISED. -

    Advantages of Encrypted Passwords

    • Plain text passwords are not passed across + (broken), only the cached (encrypted) password will be sent to the resource server to + effect an auto-reconnect. If the resource server does not support encrypted passwords the + auto-reconnect will fail. Use of encrypted passwords is strongly advised. +

      Advantages of Encrypted Passwords

      • Plaintext passwords are not passed across the network. Someone using a network sniffer cannot just - record passwords going to the SMB server.

      • Plain text passwords are not stored anywhere in - memory or on disk.

      • WinNT doesn't like talking to a server + record passwords going to the SMB server.

      • Plaintext passwords are not stored anywhere in + memory or on disk.

      • Windows NT does not like talking to a server that does not support encrypted passwords. It will refuse - to browse the server if the server is also in user level + to browse the server if the server is also in User Level security mode. It will insist on prompting the user for the password on each connection, which is very annoying. The only things you can do to stop this is to use SMB encryption.

      • Encrypted password support allows automatic share (resource) reconnects.

      • Encrypted passwords are essential for PDC/BDC - operation.

      Advantages of non-encrypted passwords

      • Plain text passwords are not kept - on disk, and are NOT cached in memory.

      • Uses same password file as other unix - services such as login and ftp

      • Use of other services (such as telnet and ftp) which - send plain text passwords over the net, so sending them for SMB - isn't such a big deal.

    Mapping User Identifiers between MS Windows and UNIX

    + operation.

    Advantages of Non-Encrypted Passwords

    • Plaintext passwords are not kept + on disk, and are not cached in memory.

    • Uses same password file as other UNIX + services such as Login and FTP.

    • Use of other services (such as Telnet and FTP) that + send plain text passwords over the network, so sending them for SMB + is not such a big deal.

    Mapping User Identifiers between MS Windows and UNIX

    Every operation in UNIX/Linux requires a user identifier (UID), just as in - MS Windows NT4 / 200x this requires a Security Identifier (SID). Samba provides + MS Windows NT4/200x this requires a Security Identifier (SID). Samba provides two means for mapping an MS Windows user to a UNIX/Linux UID.

    - Firstly, all Samba SAM (Security Account Manager database) accounts require + First, all Samba SAM (Security Account Manager database) accounts require a UNIX/Linux UID that the account will map to. As users are added to the account - information database, Samba will call the add user script + information database, Samba will call the add user script interface to add the account to the Samba host OS. In essence all accounts in the local SAM require a local user account.

    - The second way to affect Windows SID to UNIX UID mapping is via the - idmap uid, idmap gid parameters in smb.conf. + The second way to effect Windows SID to UNIX UID mapping is via the + idmap uid and idmap gid parameters in smb.conf. Please refer to the man page for information about these parameters. These parameters are essential when mapping users from a remote SAM server.

    Mapping Common UIDs/GIDs on Distributed Machines

    Samba-3 has a special facility that makes it possible to maintain identical UIDs and GIDs on all servers in a distributed network. A distributed network is one where there exists - a PDC, one or more BDCs and/or one or more domain member servers. Why is this important? - This is important if files are being shared over more than one protocol (eg: NFS) and where + a PDC, one or more BDCs and/or one or more Domain Member servers. Why is this important? + This is important if files are being shared over more than one protocol (e.g., NFS) and where users are copying files across UNIX/Linux systems using tools such as rsync.

    The special facility is enabled using a parameter called idmap backend. - The default setting for this parameter is an empty string. Administrators should NOT set this - parameter except when an LDAP based passdb backend is in use. An example of use is: + The default setting for this parameter is an empty string. Technically it is possible to use + an LDAP based idmap backend for UIDs and GIDs, but it makes most sense when this is done for + network configurations that also use LDAP for the SAM backend. A sample use is shown in + .

    -

    Example 11.1. 

    [global]
    idmap backend = ldapsam://ldap-server.quenya.org:636

    -

    Account Management Tools

    -Samba provides two (2) tools for management of User and machine accounts. These tools are + +

    Example 11.1. Example configuration with the LDAP idmap backend

    [global]
    idmap backend = ldapsam:ldap://ldap-server.quenya.org:636
    idmap backend = ldapsam:ldaps://ldap-server.quenya.org

    +

    + A network administrator who wants to make significant use of LDAP backends will sooner or later be + exposed to the excellent work done by PADL Software. PADL http://www.padl.com have + produced and released to open source an array of tools that might be of interest. These tools include: +

    • + nss_ldap: An LDAP Name Service Switch module to provide native + name service support for AIX, Linux, Solaris, and other operating systems. This tool + can be used for centralized storage and retrieval of UIDs/GIDs. +

    • + pam_ldap: A PAM module that provides LDAP integration for UNIX/Linux + system access authentication. +

    • + idmap_ad: An IDMAP backend that supports the Microsoft Services for + UNIX RFC 2307 schema available from their web + site. +

    Account Management Tools

    + +Samba provides two tools for management of user and machine accounts. These tools are called smbpasswd and pdbedit. A third tool is under -development but is NOT expected to ship in time for Samba-3.0.0. The new tool will be a TCL/TK -GUI tool that looks much like the MS Windows NT4 Domain User Manager - hopefully this will +development but is not expected to ship in time for Samba-3.0.0. The new tool will be a TCL/TK +GUI tool that looks much like the MS Windows NT4 Domain User Manager. Hopefully this will be announced in time for the Samba-3.0.1 release. -

    The smbpasswd Command

    - The smbpasswd utility is a utility similar to the passwd - or yppasswd programs. It maintains the two 32 byte password +

    The smbpasswd Command

    + The smbpasswd utility is similar to the passwd + or yppasswd programs. It maintains the two 32 byte password fields in the passdb backend.

    smbpasswd works in a client-server mode where it contacts the - local smbd to change the user's password on its behalf. This has enormous benefits - as follows: + local smbd to change the user's password on its behalf. This has enormous benefits.

    smbpasswd has the capability to change passwords on Windows NT servers (this only works when the request is sent to the NT Primary Domain Controller if changing an NT Domain user's password).

    smbpasswd can be used to: -

    • add user or machine accounts

    • delete user or machine accounts

    • enable user or machine accounts

    • disable user or machine accounts

    • set to NULL user passwords

    • manage interdomain trust accounts

    + + + +

    • add user or machine accounts.
    • delete user or machine accounts.
    • enable user or machine accounts.
    • disable user or machine accounts.
    • set to NULL user passwords.
    • manage interdomain trust accounts.

    To run smbpasswd as a normal user just type:

     $ smbpasswd
     Old SMB password: secret
     

    - For secret type old value here - or hit return if - there was no old password + For secret, type old value here or press return if + there is no old password.

     New SMB Password: new secret
     Repeat New SMB Password: new secret
    @@ -226,32 +261,38 @@ be announced in time for the Samba-3.0.1 release.
     		If the old value does not match the current value stored for that user, or the two
     		new values do not match each other, then the password will not be changed.
     		

    - When invoked by an ordinary user it will only allow change of their own + When invoked by an ordinary user, the command will only allow the user to change his or her own SMB password.

    - When run by root smbpasswd may take an optional argument, specifying - the user name whose SMB password you wish to change. When run as root, smbpasswd + When run by root, smbpasswd may take an optional argument specifying + the user name whose SMB password you wish to change. When run as root, smbpasswd does not prompt for or check the old password value, thus allowing root to set passwords for users who have forgotten their passwords.

    smbpasswd is designed to work in the way familiar to UNIX users who use the passwd or yppasswd commands. - While designed for administrative use, this tool provides essential user level + While designed for administrative use, this tool provides essential User Level password change capabilities.

    - For more details on using smbpasswd refer to the man page (the + For more details on using smbpasswd, refer to the man page (the definitive reference). -

    The pdbedit Command

    +

    The pdbedit Command

    + pdbedit is a tool that can be used only by root. It is used to manage the passdb backend. pdbedit can be used to: -

    • add, remove or modify user accounts

    • listing user accounts

    • migrate user accounts

    + + + +

    • add, remove or modify user accounts.
    • list user accounts.
    • migrate user accounts.

    + The pdbedit tool is the only one that can manage the account security and policy settings. It is capable of all operations that smbpasswd can do as well as a super set of them.

    + One particularly important purpose of the pdbedit is to allow the migration of account information from one passdb backend to another. See the - XML password backend section of this chapter. + password backend section of this chapter.

    The following is an example of the user account information that is stored in a tdbsam password backend. This listing was produced by running: @@ -278,12 +319,13 @@ Password last set: Sat, 14 Dec 2002 14:37:03 GMT Password can change: Sat, 14 Dec 2002 14:37:03 GMT Password must change: Mon, 18 Jan 2038 20:14:07 GMT

    + The pdbedit tool allows migration of authentication (account) databases from one backend to another. For example: To migrate accounts from an old smbpasswd database to a tdbsam backend:

    1. - Set the passdb backend = tdbsam, smbpasswd. + Set the passdb backend = tdbsam, smbpasswd.

    2. Execute:

      @@ -292,7 +334,7 @@ Password must change: Mon, 18 Jan 2038 20:14:07 GMT
       			

    3. Now remove the smbpasswd from the passdb backend configuration in smb.conf. -

    Password Backends

    +

    Password Backends

    Samba offers the greatest flexibility in backend account database design of any SMB/CIFS server technology available today. The flexibility is immediately obvious as one begins to explore this capability. @@ -300,92 +342,95 @@ capability. It is possible to specify not only multiple different password backends, but even multiple backends of the same type. For example, to use two different tdbsam databases:

    -

    passdb backend = tdbsam:/etc/samba/passdb.tdb, tdbsam:/etc/samba/old-passdb.tdb

    -

    Plain Text

    - Older versions of Samba retrieved user information from the unix user database +

    passdb backend = tdbsam:/etc/samba/passdb.tdb \
    tdbsam:/etc/samba/old-passdb.tdb

    +

    Plaintext

    + Older versions of Samba retrieved user information from the UNIX user database and eventually some other fields from the file /etc/samba/smbpasswd or /etc/smbpasswd. When password encryption is disabled, no SMB specific data is stored at all. Instead all operations are conducted via the way that the Samba host OS will access its /etc/passwd database. - eg: On Linux systems that is done via PAM. -

    smbpasswd - Encrypted Password Database

    - Traditionally, when configuring encrypt passwords = yes in Samba's smb.conf file, user account + Linux systems For example, all operations are done via PAM. +

    smbpasswd Encrypted Password Database

    + + Traditionally, when configuring encrypt passwords = yes in Samba's smb.conf file, user account information such as username, LM/NT password hashes, password change times, and account - flags have been stored in the smbpasswd(5) file. There are several - disadvantages to this approach for sites with very large numbers of users (counted + flags have been stored in the smbpasswd(5) file. There are several + disadvantages to this approach for sites with large numbers of users (counted in the thousands).

    • - The first is that all lookups must be performed sequentially. Given that + The first problem is that all lookups must be performed sequentially. Given that there are approximately two lookups per domain logon (one for a normal session connection such as when mapping a network drive or printer), this - is a performance bottleneck for large sites. What is needed is an indexed approach - such as is used in databases. + is a performance bottleneck for large sites. What is needed is an indexed approach + such as used in databases.

    • The second problem is that administrators who desire to replicate a smbpasswd file to more than one Samba server were left to use external tools such as rsync(1) and ssh(1) and wrote custom, in-house scripts.

    • - And finally, the amount of information which is stored in an smbpasswd entry leaves + Finally, the amount of information that is stored in an smbpasswd entry leaves no room for additional attributes such as a home directory, password expiration time, or even a Relative Identifier (RID).

    As a result of these deficiencies, a more robust means of storing user attributes - used by smbd was developed. The API which defines access to user accounts + used by smbd was developed. The API which defines access to user accounts is commonly referred to as the samdb interface (previously this was called the passdb API, and is still so named in the Samba CVS trees).

    Samba provides an enhanced set of passdb backends that overcome the deficiencies - of the smbpasswd plain text database. These are tdbsam, ldapsam, and xmlsam. - Of these ldapsam will be of most interest to large corporate or enterprise sites. -

    tdbsam

    Samba can store user and machine account data in a "TDB" (Trivial Database). - Using this backend doesn't require any additional configuration. This backend is + of the smbpasswd plain text database. These are tdbsam, ldapsam and xmlsam. + Of these, ldapsam will be of most interest to large corporate or enterprise sites. +

    tdbsam

    + + Samba can store user and machine account data in a “TDB” (Trivial Database). + Using this backend does not require any additional configuration. This backend is recommended for new installations that do not require LDAP.

    - As a general guide the Samba-Team does NOT recommend using the tdbsam backend for sites + As a general guide, the Samba Team does not recommend using the tdbsam backend for sites that have 250 or more users. Additionally, tdbsam is not capable of scaling for use - in sites that require PDB/BDC implementations that requires replication of the account + in sites that require PDB/BDC implementations that require replication of the account database. Clearly, for reason of scalability, the use of ldapsam should be encouraged. -

    ldapsam

    +

    + The recommendation of a 250 user limit is purely based on the notion that this + would generally involve a site that has routed networks, possibly spread across + more than one physical location. The Samba Team has not at this time established + the performance based scalability limits of the tdbsam architecture. +

    ldapsam

    + There are a few points to stress that the ldapsam does not provide. The LDAP - support referred to in the this documentation does not include: + support referred to in this documentation does not include:

    • A means of retrieving user account information from an Windows 200x Active Directory server.

    • A means of replacing /etc/passwd.

    - The second item can be accomplished by using LDAP NSS and PAM modules. LGPL - versions of these libraries can be obtained from PADL Software - (http://www.padl.com/). More - information about the configuration of these packages may be found at "LDAP, - System Administration; Gerald Carter, O'Reilly; Chapter 6: Replacing NIS". - Refer to - http://safari.oreilly.com/?XmlId=1-56592-491-6 for those who might wish to know - more about configuration and administration of an OpenLDAP server. -

    Note

    - This section is outdated for Samba-3 schema. Samba-3 introduces a new schema - that has not been documented at the time of this publication. -

    + The second item can be accomplished by using LDAP NSS and PAM modules. LGPL + versions of these libraries can be obtained from + PADL Software. + More information about the configuration of these packages may be found at + + LDAP, System Administration; Gerald Carter by O'Reilly; Chapter 6: Replacing NIS." +

    This document describes how to use an LDAP directory for storing Samba user - account information traditionally stored in the smbpasswd(5) file. It is + account information traditionally stored in the smbpasswd(5) file. It is assumed that the reader already has a basic understanding of LDAP concepts - and has a working directory server already installed. For more information - on LDAP architectures and Directories, please refer to the following sites. -

    - Two additional Samba resources which may prove to be helpful are -

    • The Samba-PDC-LDAP-HOWTO - maintained by Ignacio Coupeau.

    • The NT migration scripts from IDEALX that are + and has a working directory server already installed. For more information + on LDAP architectures and directories, please refer to the following sites: +

      • OpenLDAP

      • Sun iPlanet Directory Server

      + Two additional Samba resources which may prove to be helpful are: +

      • The Samba-PDC-LDAP-HOWTO + maintained by Ignacio Coupeau.

      • The NT migration scripts from IDEALX that are geared to manage users and group in such a Samba-LDAP Domain Controller configuration. -

      Supported LDAP Servers

      +

    Supported LDAP Servers

    The LDAP ldapsam code has been developed and tested using the OpenLDAP 2.0 and 2.1 server and - client libraries. The same code should work with Netscape's Directory Server and client SDK. + client libraries. The same code should work with Netscape's Directory Server and client SDK. However, there are bound to be compile errors and bugs. These should not be hard to fix. - Please submit fixes via Bug reporting facility. -

    Schema and Relationship to the RFC 2307 posixAccount

    - Samba 3.0 includes the necessary schema file for OpenLDAP 2.0 in - examples/LDAP/samba.schema. The sambaSamAccount objectclass is given here: + Please submit fixes via the process outlined in . +

    Schema and Relationship to the RFC 2307 posixAccount

    + Samba-3.0 includes the necessary schema file for OpenLDAP 2.0 in + examples/LDAP/samba.schema. The sambaSamAccount objectclass is given here:

    -objectclass ( 1.3.6.1.4.1.7165.2.2.6 NAME 'sambaSamAccount' SUP top AUXILIARY
    -    DESC 'Samba 3.0 Auxiliary SAM Account'
    +objectclass (1.3.6.1.4.1.7165.2.2.6 NAME 'sambaSamAccount' SUP top AUXILIARY
    +    DESC 'Samba-3.0 Auxiliary SAM Account'
         MUST ( uid $ sambaSID )
         MAY  ( cn $ sambaLMPassword $ sambaNTPassword $ sambaPwdLastSet $
               sambaLogonTime $ sambaLogoffTime $ sambaKickoffTime $
    @@ -396,41 +441,41 @@ objectclass ( 1.3.6.1.4.1.7165.2.2.6 NAME 'sambaSamAccount' SUP top AUXILIARY
     

    The samba.schema file has been formatted for OpenLDAP 2.0/2.1. - The OID's are owned by the Samba Team and as such is legal to be openly published. - If you translate the schema to be used with Netscape DS, please - submit the modified schema file as a patch to - jerry@samba.org. + The Samba Team owns the OID space used by the above schema and recommends its use. + If you translate the schema to be used with Netscape DS, please submit the modified + schema file as a patch to jerry@samba.org.

    - Just as the smbpasswd file is meant to store information which supplements a + Just as the smbpasswd file is meant to store information that provides information additional to a user's /etc/passwd entry, so is the sambaSamAccount object - meant to supplement the UNIX user account information. A sambaSamAccount is a - STRUCTURAL objectclass so it can be stored individually - in the directory. However, there are several fields (e.g. uid) which overlap - with the posixAccount objectclass outlined in RFC2307. This is by design. + meant to supplement the UNIX user account information. A sambaSamAccount is a + AUXILIARY objectclass so it can be used to augment existing + user account information in the LDAP directory, thus providing information needed + for Samba account handling. However, there are several fields (e.g., uid) that overlap + with the posixAccount objectclass outlined in RFC2307. This is by design.

    In order to store all user account information (UNIX and Samba) in the directory, it is necessary to use the sambaSamAccount and posixAccount objectclasses in - combination. However, smbd will still obtain the user's UNIX account - information via the standard C library calls (e.g. getpwnam(), et. al.). + combination. However, smbd will still obtain the user's UNIX account + information via the standard C library calls (e.g., getpwnam(), et al). This means that the Samba server must also have the LDAP NSS library installed - and functioning correctly. This division of information makes it possible to + and functioning correctly. This division of information makes it possible to store all Samba account information in LDAP, but still maintain UNIX account information in NIS while the network is transitioning to a full LDAP infrastructure. -

    OpenLDAP configuration

    +

    OpenLDAP Configuration

    To include support for the sambaSamAccount object in an OpenLDAP directory server, first copy the samba.schema file to slapd's configuration directory. The samba.schema file can be found in the directory examples/LDAP - in the samba source distribution. + in the Samba source distribution.

     root# cp samba.schema /etc/openldap/schema/
     

    Next, include the samba.schema file in slapd.conf. - The sambaSamAccount object contains two attributes which depend upon other schema - files. The 'uid' attribute is defined in cosine.schema and - the 'displayName' attribute is defined in the inetorgperson.schema - file. Both of these must be included before the samba.schema file. + The sambaSamAccount object contains two attributes that depend on other schema + files. The uid attribute is defined in cosine.schema and + the displayName attribute is defined in the inetorgperson.schema + file. Both of these must be included before the samba.schema file.

     ## /etc/openldap/slapd.conf
    @@ -447,8 +492,8 @@ include            /etc/openldap/schema/nis.schema
     

    It is recommended that you maintain some indices on some of the most useful attributes, - like in the following example, to speed up searches made on sambaSamAccount objectclasses - (and possibly posixAccount and posixGroup as well). + as in the following example, to speed up searches made on sambaSamAccount objectclasses + (and possibly posixAccount and posixGroup as well):

     # Indices to maintain
    @@ -485,10 +530,10 @@ index   default               sub
     

     root# /etc/init.d/slapd restart
     

    -

    Initialise the LDAP database

    +

    Initialize the LDAP Database

    Before you can add accounts to the LDAP database you must create the account containers that they will be stored in. The following LDIF file should be modified to match your - needs (ie: Your DNS entries, etc.). + needs (DNS entries, and so on):

     # Organization for Samba Base
    @@ -518,6 +563,34 @@ objectclass: top
     objectclass: organizationalRole
     objectclass: simpleSecurityObject
     userPassword: {SSHA}c3ZM9tBaBo9autm1dL3waDS21+JSfQVz
    +
    +# Setting up container for groups
    +dn: ou=Groups,dc=quenya,dc=org
    +objectclass: top
    +objectclass: organizationalUnit
    +ou: People
    +
    +# Setting up admin handle for Groups OU
    +dn: cn=admin,ou=Groups,dc=quenya,dc=org
    +cn: admin
    +objectclass: top
    +objectclass: organizationalRole
    +objectclass: simpleSecurityObject
    +userPassword: {SSHA}c3ZM9tBaBo9autm1dL3waDS21+JSfQVz
    +
    +# Setting up container for computers
    +dn: ou=Computers,dc=quenya,dc=org
    +objectclass: top
    +objectclass: organizationalUnit
    +ou: People
    +
    +# Setting up admin handle for Computers OU
    +dn: cn=admin,ou=Computers,dc=quenya,dc=org
    +cn: admin
    +objectclass: top
    +objectclass: organizationalRole
    +objectclass: simpleSecurityObject
    +userPassword: {SSHA}c3ZM9tBaBo9autm1dL3waDS21+JSfQVz
     

    The userPassword shown above should be generated using slappasswd. @@ -529,7 +602,7 @@ userPassword: {SSHA}c3ZM9tBaBo9autm1dL3waDS21+JSfQVz $ slapadd -v -l initldap.dif

    - Do not forget to secure your LDAP server with an adequate access control list, + Do not forget to secure your LDAP server with an adequate access control list as well as an admin password.

    Note

    Before Samba can access the LDAP server you need to store the LDAP admin password @@ -537,124 +610,142 @@ userPassword: {SSHA}c3ZM9tBaBo9autm1dL3waDS21+JSfQVz

     root# smbpasswd -w secret
     

    -

    Configuring Samba

    +

    Configuring Samba

    The following parameters are available in smb.conf only if your - version of samba was built with LDAP support. Samba automatically builds with LDAP support if the + version of Samba was built with LDAP support. Samba automatically builds with LDAP support if the LDAP libraries are found.

    LDAP related smb.conf options: - passdb backend = ldapsam:url, - ldap ssl, - ldap admin dn, - ldap suffix, - ldap filter, - ldap machine suffix, - ldap user suffix, - ldap delete dn, - ldap passwd sync, - ldap trust ids. + passdb backend = ldapsam:url, + ldap admin dn, + ldap delete dn, + ldap filter, + ldap group suffix, + ldap idmap suffix, + ldap machine suffix, + ldap passwd sync, + ldap ssl, + ldap suffix, + ldap user suffix,

    These are described in the smb.conf man - page and so will not be repeated here. However, a sample smb.conf file for - use with an LDAP directory could appear as + page and so will not be repeated here. However, a sample smb.conf file for + use with an LDAP directory could appear as shown in .

    -

    Example 11.2. Configuration with LDAP

    [global]
    security = user
    encrypt passwords = yes
    netbios name = TASHTEGO
    workgroup = NARNIA
    # ldap related parameters
    # define the DN to use when binding to the directory servers
    # The password for this DN is not stored in smb.conf. Rather it
    # must be set by using 'smbpasswd -w secretpw' to store the
    # passphrase in the secrets.tdb file. If the "ldap admin dn" values
    # change, this password will need to be reset.
    ldap admin dn = "cn=Samba Manager,ou=people,dc=samba,dc=org"
    # Define the SSL option when connecting to the directory
    # ('off', 'start tls', or 'on' (default))
    ldap ssl = start tls
    # syntax: passdb backend = ldapsam:ldap://server-name[:port]
    passdb backend = ldapsam:ldap://funball.samba.org
    # smbpasswd -x delete the entire dn-entry
    ldap delete dn = no
    # the machine and user suffix added to the base suffix
    # wrote WITHOUT quotes. NULL suffixes by default
    ldap user suffix = ou=People
    ldap machine suffix = ou=Systems
    # Trust unix account information in LDAP
    # (see the smb.conf manpage for details)
    ldap trust ids = Yes
    # specify the base DN to use when searching the directory
    ldap suffix = "ou=people,dc=samba,dc=org"
    # generally the default ldap search filter is ok
    ldap filter = "(&(uid=%u)(objectclass=sambaSamAccount))"

    -

    Accounts and Groups management

    - As users accounts are managed through the sambaSamAccount objectclass, you should +

    Example 11.2. Configuration with LDAP

    [global]
    security = user
    encrypt passwords = yes
    netbios name = MORIA
    workgroup = NOLDOR
    # ldap related parameters
    # define the DN to use when binding to the directory servers
    # The password for this DN is not stored in smb.conf. Rather it
    # must be set by using 'smbpasswd -w secretpw' to store the
    # passphrase in the secrets.tdb file. If the "ldap admin dn" values
    # change, this password will need to be reset.
    ldap admin dn = "cn=Manager,ou=People,dc=quenya,dc=org"
    # Define the SSL option when connecting to the directory
    # ('off', 'start tls', or 'on' (default))
    ldap ssl = start tls
    # syntax: passdb backend = ldapsam:ldap://server-name[:port]
    passdb backend = ldapsam:ldap://frodo.quenya.org
    # smbpasswd -x delete the entire dn-entry
    ldap delete dn = no
    # the machine and user suffix added to the base suffix
    # wrote WITHOUT quotes. NULL suffixes by default
    ldap user suffix = ou=People
    ldap group suffix = ou=Groups
    ldap machine suffix = ou=Computers
    # Trust UNIX account information in LDAP
    # (see the smb.conf manpage for details)
    # specify the base DN to use when searching the directory
    ldap suffix = ou=People,dc=quenya,dc=org
    # generally the default ldap search filter is ok
    ldap filter = (&(uid=%u)(objectclass=sambaSamAccount))

    +

    Accounts and Groups Management

    + + + + As user accounts are managed through the sambaSamAccount objectclass, you should modify your existing administration tools to deal with sambaSamAccount attributes.

    - Machines accounts are managed with the sambaSamAccount objectclass, just - like users accounts. However, it's up to you to store those accounts - in a different tree of your LDAP namespace: you should use - "ou=Groups,dc=quenya,dc=org" to store groups and - "ou=People,dc=quenya,dc=org" to store users. Just configure your - NSS and PAM accordingly (usually, in the /etc/ldap.conf configuration - file). + Machine accounts are managed with the sambaSamAccount objectclass, just + like users accounts. However, it is up to you to store those accounts + in a different tree of your LDAP namespace. You should use + “ou=Groups,dc=quenya,dc=org” to store groups and + “ou=People,dc=quenya,dc=org” to store users. Just configure your + NSS and PAM accordingly (usually, in the /etc/openldap/sldap.conf + configuration file).

    - In Samba release 3.0, the group management system is based on POSIX + In Samba-3, the group management system is based on POSIX groups. This means that Samba makes use of the posixGroup objectclass. For now, there is no NT-like group system management (global and local - groups). -

    Security and sambaSamAccount

    + groups). Samba-3 knows only about Domain Groups + and, unlike MS Windows 2000 and Active Directory, Samba-3 does not + support nested groups. +

    Security and sambaSamAccount

    There are two important points to remember when discussing the security of sambaSamAccount entries in the directory.

    • Never retrieve the lmPassword or ntPassword attribute values over an unencrypted LDAP session.

    • Never allow non-admin users to view the lmPassword or ntPassword attribute values.

    - These password hashes are clear text equivalents and can be used to impersonate - the user without deriving the original clear text strings. For more information + These password hashes are cleartext equivalents and can be used to impersonate + the user without deriving the original cleartext strings. For more information on the details of LM/NT password hashes, refer to the - Account Information Database section of this chapter. + section of this chapter.

    - To remedy the first security issue, the ldap ssl smb.conf parameter defaults - to require an encrypted session (ldap ssl = on) using + To remedy the first security issue, the ldap ssl smb.conf parameter defaults + to require an encrypted session (ldap ssl = on) using the default port of 636 - when contacting the directory server. When using an OpenLDAP server, it + when contacting the directory server. When using an OpenLDAP server, it is possible to use the use the StartTLS LDAP extended operation in the place of - LDAPS. In either case, you are strongly discouraged to disable this security - (ldap ssl = off). + LDAPS. In either case, you are strongly discouraged to disable this security + (ldap ssl = off).

    Note that the LDAPS protocol is deprecated in favor of the LDAPv3 StartTLS - extended operation. However, the OpenLDAP library still provides support for + extended operation. However, the OpenLDAP library still provides support for the older method of securing communication between clients and servers.

    The second security precaution is to prevent non-administrative users from - harvesting password hashes from the directory. This can be done using the + harvesting password hashes from the directory. This can be done using the following ACL in slapd.conf:

    -## allow the "ldap admin dn" access, but deny everyone else
    +## allow the "ldap admin dn" access, but deny everyone else
     access to attrs=lmPassword,ntPassword
    -     by dn="cn=Samba Admin,ou=people,dc=quenya,dc=org" write
    +     by dn="cn=Samba Admin,ou=People,dc=quenya,dc=org" write
          by * none
     

    -

    LDAP special attributes for sambaSamAccounts

    - The sambaSamAccount objectclass is composed of the following attributes: +

    LDAP Special Attributes for sambaSamAccounts

    + The sambaSamAccount objectclass is composed of the attributes shown in , and .

    -

    Table 11.1. Attributes in the sambaSamAccount objectclass (LDAP)

    sambaLMPasswordthe LANMAN password 16-byte hash stored as a character -representation of a hexadecimal string.
    sambaNTPasswordthe NT password hash 16-byte stored as a character +

    Table 11.1. Attributes in the sambaSamAccount objectclass (LDAP) Part A

    sambaLMPasswordThe LANMAN password 16-byte hash stored as a character + representation of a hexadecimal string.
    sambaNTPasswordThe NT password hash 16-byte stored as a character representation of a hexadecimal string.
    sambaPwdLastSetThe integer time in seconds since 1970 when the sambaLMPassword and sambaNTPassword attributes were last set. -
    sambaAcctFlagsstring of 11 characters surrounded by square brackets [] - representing account flags such as U (user), W(workstation), X(no password expiration), - I(Domain trust account), H(Home dir required), S(Server trust account), - and D(disabled).
    sambaLogonTimeInteger value currently unused
    sambaLogoffTimeInteger value currently unused
    sambaKickoffTimeInteger value currently unused
    sambaPwdCanChangeInteger value currently unused
    sambaPwdMustChangeInteger value currently unused
    sambaHomeDrivespecifies the drive letter to which to map the - UNC path specified by sambaHomePath. The drive letter must be specified in the form "X:" - where X is the letter of the drive to map. Refer to the "logon drive" parameter in the +
    sambaAcctFlagsString of 11 characters surrounded by square brackets [] + representing account flags such as U (user), W (workstation), X (no password expiration), + I (Domain trust account), H (Home dir required), S (Server trust account), + and D (disabled).
    sambaLogonTimeInteger value currently unused
    sambaLogoffTimeInteger value currently unused
    sambaKickoffTimeSpecifies the time (UNIX time format) when the user + will be locked down and cannot login any longer. If this attribute is ommited, then the account will never expire. + If you use this attribute together with `shadowExpire' of the `shadowAccount' objectClass, will enable accounts to + expire completly on an exact date.
    sambaPwdCanChangeSpecifies the time (UNIX time format) from which on the user is allowed to + change his password. If attribute is not set, the user will be free to change his password whenever he wants.
    sambaPwdMustChangeSpecifies the time (UNIX time format) since when the user is + forced to change his password. If this value is set to `0', the user will have to change his password at first login. + If this attribute is not set, then the password will never expire.
    sambaHomeDriveSpecifies the drive letter to which to map the + UNC path specified by sambaHomePath. The drive letter must be specified in the form “X:” + where X is the letter of the drive to map. Refer to the “logon drive” parameter in the smb.conf(5) man page for more information.
    sambaLogonScriptThe sambaLogonScript property specifies the path of the user's logon script, .CMD, .EXE, or .BAT file. The string can be null. The path - is relative to the netlogon share. Refer to the logon script parameter in the - smb.conf man page for more information.
    sambaProfilePathspecifies a path to the user's profile. - This value can be a null string, a local absolute path, or a UNC path. Refer to the - logon path parameter in the smb.conf man page for more information.
    sambaHomePathThe sambaHomePath property specifies the path of -the home directory for the user. The string can be null. If sambaHomeDrive is set and specifies -a drive letter, sambaHomePath should be a UNC path. The path must be a network -UNC path of the form \\server\share\directory. This value can be a null string. -Refer to the logon home parameter in the smb.conf man page for more information. -
    sambaUserWorkstationscharacter string value currently unused. -
    sambaSIDThe security identifier(SID) of the user. The windows equivalent of unix uid's.
    sambaPrimaryGroupSIDthe relative identifier (RID) of the primary group - of the user.
    sambaDomainNamedomain the user is part of.

    + is relative to the netlogon share. Refer to the logon script parameter in the + smb.conf man page for more information.

    sambaProfilePathSpecifies a path to the user's profile. + This value can be a null string, a local absolute path, or a UNC path. Refer to the + logon path parameter in the smb.conf man page for more information.
    sambaHomePathThe sambaHomePath property specifies the path of + the home directory for the user. The string can be null. If sambaHomeDrive is set and specifies + a drive letter, sambaHomePath should be a UNC path. The path must be a network + UNC path of the form \\server\share\directory. This value can be a null string. + Refer to the logon home parameter in the smb.conf man page for more information. +

    +

    +

    Table 11.2. Attributes in the sambaSamAccount objectclass (LDAP) Part B

    sambaUserWorkstationsHere you can give a comma-seperated list of machines + on which the user is allowed to login. You may observe problems when you try to connect to an Samba Domain Member. + Bacause Domain Members are not in this list, the Domain Controllers will reject them. Where this attribute is ommited, + the default implies no restrictions. +
    sambaSIDThe security identifier(SID) of the user. + The Windows equivalent of UNIX UIDs.
    sambaPrimaryGroupSIDThe Security IDentifier (SID) of the primary group + of the user.
    sambaDomainNameDomain the user is part of.

    The majority of these parameters are only used when Samba is acting as a PDC of - a domain (refer to the Samba as a primary domain controller chapter for details on + a domain (refer to , for details on how to configure Samba as a Primary Domain Controller). The following four attributes are only stored with the sambaSamAccount entry if the values are non-default values: -

    • sambaHomePath

    • sambaLogonScript

    • sambaProfilePath

    • sambaHomeDrive

    +

    • sambaHomePath
    • sambaLogonScript
    • sambaProfilePath
    • sambaHomeDrive

    These attributes are only stored with the sambaSamAccount entry if - the values are non-default values. For example, assume TASHTEGO has now been - configured as a PDC and that logon home = \\%L\%u was defined in - its smb.conf file. When a user named "becky" logons to the domain, - the logon home string is expanded to \\TASHTEGO\becky. - If the smbHome attribute exists in the entry "uid=becky,ou=people,dc=samba,dc=org", - this value is used. However, if this attribute does not exist, then the value - of the logon home parameter is used in its place. Samba + the values are non-default values. For example, assume MORIA has now been + configured as a PDC and that logon home = \\%L\%u was defined in + its smb.conf file. When a user named “becky” logons to the domain, + the logon home string is expanded to \\MORIA\becky. + If the smbHome attribute exists in the entry “uid=becky,ou=People,dc=samba,dc=org”, + this value is used. However, if this attribute does not exist, then the value + of the logon home parameter is used in its place. Samba will only write the attribute value to the directory entry if the value is - something other than the default (e.g. \\MOBY\becky). -

    Example LDIF Entries for a sambaSamAccount

    - The following is a working LDIF with the inclusion of the posixAccount objectclass: + something other than the default (e.g., \\MOBY\becky). +

    Example LDIF Entries for a sambaSamAccount

    + The following is a working LDIF that demonstrates the use of the SambaSamAccount objectclass:

    -	dn: uid=guest2, ou=people,dc=quenya,dc=org
    -	sambaNTPassword: 878D8014606CDA29677A44EFA1353FC7
    +	dn: uid=guest2, ou=People,dc=quenya,dc=org
    +	sambaLMPassword: 878D8014606CDA29677A44EFA1353FC7
     	sambaPwdMustChange: 2147483647
     	sambaPrimaryGroupSID: S-1-5-21-2447931902-1787058256-3961074038-513
     	sambaNTPassword: 552902031BEDE9EFAAD3B435B51404EE
    @@ -673,7 +764,7 @@ Refer to the logon home parameter in the 
    -	dn: uid=gcarter, ou=people,dc=quenya,dc=org
    +	dn: uid=gcarter, ou=People,dc=quenya,dc=org
     	sambaLogonTime: 0
     	displayName: Gerald Carter
     	sambaLMPassword: 552902031BEDE9EFAAD3B435B51404EE
    @@ -691,95 +782,102 @@ Refer to the logon home parameter in the 

    Password synchronisation

    - Since version 3.0 samba can update the non-samba (LDAP) password stored with an account. When - using pam_ldap, this allows changing both unix and windows passwords at once. -

    The ldap passwd sync options can have the following values:

    yes

    When the user changes his password, update - ntPassword, lmPassword - and the password fields.

    no

    Only update ntPassword and lmPassword.

    only

    Only update the LDAP password and let the LDAP server worry about the other fields. This option is only available on some LDAP servers. [3]

    More information can be found in the smb.conf manpage. -

    MySQL

    - Every so often someone will come along with a great new idea. Storing of user accounts in an +

    Password Synchronization

    + Samba-3 and later can update the non-samba (LDAP) password stored with an account. When + using pam_ldap, this allows changing both UNIX and Windows passwords at once. +

    The ldap passwd sync options can have the values shown in + .

    Table 11.3. Possible ldap passwd sync values

    ValueDescription
    yes

    When the user changes his password, update + ntPassword, lmPassword + and the password fields.

    no

    Only update ntPassword and lmPassword.

    only

    Only update the LDAP password and let the LDAP server worry about the other fields. + This option is only available on some LDAP servers. Only when the LDAP server + supports LDAP_EXOP_X_MODIFY_PASSWD.

    More information can be found in the smb.conf manpage.

    MySQL

    + + Every so often someone will come along with a great new idea. Storing user accounts in a SQL backend is one of them. Those who want to do this are in the best position to know what the - specific benefits are to them. This may sound like a cop-out, but in truth we can not attempt - to document every nitty little detail why certain things of marginal utility to the bulk of + specific benefits are to them. This may sound like a cop-out, but in truth we cannot attempt + to document every little detail why certain things of marginal utility to the bulk of Samba users might make sense to the rest. In any case, the following instructions should help the determined SQL user to implement a working system. -

    Creating the database

    - You either can set up your own table and specify the field names to pdb_mysql (see below +

    Creating the Database

    + You can set up your own table and specify the field names to pdb_mysql (see below for the column names) or use the default table. The file examples/pdb/mysql/mysql.dump - contains the correct queries to create the required tables. Use the command : + contains the correct queries to create the required tables. Use the command:

     $ mysql -uusername -hhostname -ppassword \
    -databasename < /path/to/samba/examples/pdb/mysql/mysql.dump
    +	databasename < /path/to/samba/examples/pdb/mysql/mysql.dump
     

    -

    Configuring

    This plugin lacks some good documentation, but here is some short info:

    Add a the following to the passdb backend variable in your smb.conf: -

    passdb backend = [other-plugins] mysql:identifier [other-plugins]

    -

    The identifier can be any string you like, as long as it doesn't collide with +

    Configuring

    This plugin lacks some good documentation, but here is some brief infoormation. Add the following to the + passdb backend variable in your smb.conf: +

    passdb backend = [other-plugins] mysql:identifier [other-plugins]

    +

    The identifier can be any string you like, as long as it does not collide with the identifiers of other plugins or other instances of pdb_mysql. If you - specify multiple pdb_mysql.so entries in passdb backend, you also need to - use different identifiers! -

    - Additional options can be given through the smb.conf file in the [global] section. + specify multiple pdb_mysql.so entries in passdb backend, you also need to + use different identifiers.

    -

    Table 11.2. Basic smb.conf options for MySQL passdb backend

    FieldContents
    mysql hosthost name, defaults to 'localhost'
    mysql password 
    mysql userdefaults to 'samba'
    mysql databasedefaults to 'samba'
    mysql portdefaults to 3306
    tableName of the table containing users

    -

    Warning

    - Since the password for the MySQL user is stored in the - smb.conf file, you should make the smb.conf file - readable only to the user that runs Samba This is considered a security - bug and will be fixed soon. -

    Names of the columns in this table (I've added column types those columns should have first):

    -

    Table 11.3. MySQL field names for MySQL passdb backend

    FieldTypeContents
    logon time columnint(9) 
    logoff time columnint(9) 
    kickoff time columnint(9) 
    pass last set time columnint(9) 
    pass can change time columnint(9) 
    pass must change time columnint(9) 
    username columnvarchar(255)unix username
    domain columnvarchar(255)NT domain user is part of
    nt username columnvarchar(255)NT username
    fullname columnvarchar(255)Full name of user
    home dir columnvarchar(255)UNIX homedir path
    dir drive columnvarchar(2)Directory drive path (eg: 'H:')
    logon script columnvarchar(255)Batch file to run on client side when logging on
    profile path columnvarchar(255)Path of profile
    acct desc columnvarchar(255)Some ASCII NT user data
    workstations columnvarchar(255)Workstations user can logon to (or NULL for all)
    unknown string columnvarchar(255)unknown string
    munged dial columnvarchar(255)?
    user sid columnvarchar(255)NT user SID
    group sid columnvarchar(255)NT group ID
    lanman pass columnvarchar(255)encrypted lanman password
    nt pass columnvarchar(255)encrypted nt passwd
    plain pass columnvarchar(255)plaintext password
    acct control columnint(9)nt user data
    unknown 3 columnint(9)unknown
    logon divs columnint(9)?
    hours len columnint(9)?
    unknown 5 columnint(9)unknown
    unknown 6 columnint(9)unknown

    + Additional options can be given through the smb.conf file in the [global] section. + Refer to . +

    Table 11.4. Basic smb.conf options for MySQL passdb backend

    FieldContents
    mysql hostHost name, defaults to `localhost'
    mysql password 
    mysql userDefaults to `samba'
    mysql databaseDefaults to `samba'
    mysql portDefaults to 3306
    tableName of the table containing the users

    Warning

    + Since the password for the MySQL user is stored in the smb.conf file, you should make the smb.conf file + readable only to the user who runs Samba. This is considered a security bug and will soon be fixed. +

    Names of the columns are given in . The default column names can be found in the example table dump. +

    +

    Table 11.5. MySQL field names for MySQL passdb backend

    FieldTypeContents
    logon time columnint(9)UNIX time stamp of last logon of user
    logoff time columnint(9)UNIX time stamp of last logoff of user
    kickoff time columnint(9)UNIX time stamp of moment user should be kicked off workstation (not enforced)
    pass last set time columnint(9)UNIX time stamp of moment password was last set
    pass can change time columnint(9)UNIX time stamp of moment from which password can be changed
    pass must change time columnint(9)UNIX time stamp of moment on which password must be changed
    username columnvarchar(255)UNIX username
    domain columnvarchar(255)NT domain user belongs to
    nt username columnvarchar(255)NT username
    fullname columnvarchar(255)Full name of user
    home dir columnvarchar(255)UNIX homedir path
    dir drive columnvarchar(2)Directory drive path (e.g., “H:”)
    logon script columnvarchar(255)Batch file to run on client side when logging on
    profile path columnvarchar(255)Path of profile
    acct desc columnvarchar(255)Some ASCII NT user data
    workstations columnvarchar(255)Workstations user can logon to (or NULL for all)
    unknown string columnvarchar(255)Unknown string
    munged dial columnvarchar(255)Unknown
    user sid columnvarchar(255)NT user SID
    group sid columnvarchar(255)NT group SID
    lanman pass columnvarchar(255)Encrypted lanman password
    nt pass columnvarchar(255)Encrypted nt passwd
    plain pass columnvarchar(255)Plaintext password
    acct ctrl columnint(9)NT user data
    unknown 3 columnint(9)Unknown
    logon divs columnint(9)Unknown
    hours len columnint(9)Unknown
    bad password count columnint(5)Number of failed password tries before disabling an account
    logon count columnint(5)Number of logon attempts
    unknown 6 columnint(9)Unknown

    - Eventually, you can put a colon (:) after the name of each column, which + You can put a colon (:) after the name of each column, which should specify the column to update when updating the table. You can also - specify nothing behind the colon - then the data from the field will not be - updated. -

    Using plaintext passwords or encrypted password

    - I strongly discourage the use of plaintext passwords, however, you can use them: + specify nothing behind the colon. Then the field data will not be updated. Setting a column name to NULL means the field should not be used. +

    An example configuration can be found in . +

    Example 11.3. Example configuration for the MySQL passdb backend

    [global]
    passdb backend = mysql:foo
    foo:mysql user = samba
    foo:mysql password = abmas
    foo:mysql database = samba
    # domain name is static and can't be changed
    foo:domain column = 'MYWORKGROUP':
    # The fullname column comes from several other columns
    foo:fullname column = CONCAT(firstname,' ',surname):
    # Samba should never write to the password columns
    foo:lanman pass column = lm_pass:
    foo:nt pass column = nt_pass:
    # The unknown 3 column is not stored
    foo:unknown 3 column = NULL

    Using Plaintext Passwords or Encrypted Password

    + + I strongly discourage the use of plaintext passwords, however, you can use them.

    If you would like to use plaintext passwords, set - 'identifier:lanman pass column' and 'identifier:nt pass column' to - 'NULL' (without the quotes) and 'identifier:plain pass column' to the + `identifier:lanman pass column' and `identifier:nt pass column' to + `NULL' (without the quotes) and `identifier:plain pass column' to the name of the column containing the plaintext passwords.

    If you use encrypted passwords, set the 'identifier:plain pass column' to 'NULL' (without the quotes). This is the default. -

    Getting non-column data from the table

    - It is possible to have not all data in the database and making some 'constant'. +

    Getting Non-Column Data from the Table

    + It is possible to have not all data in the database by making some `constant'.

    - For example, you can set 'identifier:fullname column' to : - CONCAT(First_name,' ',Sur_name) + For example, you can set `identifier:fullname column' to + something like CONCAT(Firstname,' ',Surname)

    - Or, set 'identifier:workstations column' to : - NULL

    See the MySQL documentation for more language constructs.

    XML

    This module requires libxml2 to be installed.

    The usage of pdb_xml is pretty straightforward. To export data, use: + Or, set `identifier:workstations column' to: + NULL

    See the MySQL documentation for more language constructs.

    XML

    + + This module requires libxml2 to be installed.

    The usage of pdb_xml is fairly straightforward. To export data, use:

    + $ pdbedit -e xml:filename

    (where filename is the name of the file to put the data in)

    To import data, use: $ pdbedit -i xml:filename -

    Common Errors

    Users can not logon

    I've installed samba, but now I can't log on with my unix account!

    Make sure your user has been added to the current samba passdb backend. Read the section Account Management Tools for details.

    Users being added to wrong backend database

    +

    Common Errors

    Users Cannot Logon

    I've installed Samba, but now I can't log on with my UNIX account!

    Make sure your user has been added to the current Samba passdb backend. Read the section for details.

    Users Being Added to the Wrong Backend Database

    A few complaints have been received from users that just moved to Samba-3. The following smb.conf file entries were causing problems, new accounts were being added to the old smbpasswd file, not to the tdbsam passdb.tdb file:

    -

    [global]
    ...
    passdb backend = smbpasswd, tdbsam
    ...

    +

    [global]
    ...
    passdb backend = smbpasswd, tdbsam
    ...

    Samba will add new accounts to the first entry in the passdb backend parameter entry. If you want to update to the tdbsam, then change the entry to:

    -

    [globals]
    ...
    passdb backend = tdbsam, smbpasswd
    ...

    -

    auth methods does not work

    - If you explicitly set an auth methods parameter, guest must be specified as the first - entry on the line. Eg: auth methods = guest sam. +

    passdb backend = tdbsam, smbpasswd

    +

    Configuration of auth methods

    + When explicitly setting an auth methods parameter, + guest must be specified as the first entry on the line, + for example, auth methods = guest sam.

    - This is the exact opposite of the requirement for the passdb backend + This is the exact opposite of the requirement for the passdb backend option, where it must be the LAST parameter on the line. -



    [3] Only when the LDAP server supports LDAP_EXOP_X_MODIFY_PASSWD

    +

    diff --git a/docs/htmldocs/pdbedit.8.html b/docs/htmldocs/pdbedit.8.html index 39a901923f..3bca3a9d6c 100644 --- a/docs/htmldocs/pdbedit.8.html +++ b/docs/htmldocs/pdbedit.8.html @@ -103,8 +103,8 @@ account policy value for bad lockout attempt is 0 account policy value for bad lockout attempt was 0 account policy value for bad lockout attempt is now 3
    -h|--help

    Print a summary of command line options. -

    -V

    Prints the version number for -smbd.

    -s <configuration file>

    The file specified contains the +

    -V

    Prints the program version number. +

    -s <configuration file>

    The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well @@ -117,13 +117,13 @@ not specified is zero.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of +day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will -override the log level parameter +override the log level parameter in the smb.conf file.

    -l|--logfile=logbasename

    File name for log/debug files. The extension ".client" will be appended. The log file is never removed by the client. diff --git a/docs/htmldocs/pr01.html b/docs/htmldocs/pr01.html index 193564ca32..f0ce4c3d3d 100644 --- a/docs/htmldocs/pr01.html +++ b/docs/htmldocs/pr01.html @@ -1,5 +1,5 @@ -Legal Notice

    Legal Notice

    +Legal Notice

    Legal Notice

    This documentation is distributed under the GNU General Public License (GPL) version 2. A copy of the license is included with the Samba source -distribution. A copy can be found on-line at http://www.fsf.org/licenses/gpl.txt -

    +distribution. A copy can be found on-line at http://www.fsf.org/licenses/gpl.txt +

    diff --git a/docs/htmldocs/pr02.html b/docs/htmldocs/pr02.html index 08a02a7142..080c1c2075 100644 --- a/docs/htmldocs/pr02.html +++ b/docs/htmldocs/pr02.html @@ -1 +1 @@ -Attributions

    Attributions

    Introduction to Samba

    How to Install and Test SAMBA

    Fast Start for the Impatient

    Server Types and Security Modes

    Domain Control

    Backup Domain Control

    Domain Membership

    Stand-Alone Servers

    MS Windows Network Configuration Guide

    Samba / MS Windows Network Browsing Guide

    Account Information Databases

    Mapping MS Windows and UNIX Groups

    File, Directory and Share Access Controls

    File and Record Locking

    Securing Samba

    Interdomain Trust Relationships

    Hosting a Microsoft Distributed File System tree on Samba

    Classical Printing Support

    CUPS Printing Support in Samba 3.0

    Stackable VFS modules

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Tim Potter

    • Simo Sorce (original vfs_skel README)

    • Alexander Bokovoy (original vfs_netatalk docs)

    • Stefan Metzmacher (Update for multiple modules)

    Advanced Network Management

    System and Account Policies

    Desktop Profile Management

    PAM based Distributed Authentication

    Integrating MS Windows networks with Samba

    Unicode/Charsets

    Samba Backup Techniques

    High Availability Options

    Upgrading from Samba-2.x to Samba-3.0.0

    Migration from NT4 PDC to Samba-3 PDC

    SWAT - The Samba Web Administration Tool

    The Samba checklist

    Analysing and solving samba problems

    Reporting Bugs

    How to compile Samba

    Portability

    Samba and other CIFS clients

    Samba Performance Tuning

    DNS and DHCP Configuration Guide

    Further Resources

    +Attributions

    Attributions

    • David Lechnyr <david@lechnyr.com>

    • Andrew Tridgell <tridge@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Karl Auer <kauer@biplane.com.au>

    • Dan Shearer <dan@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Andrew Tridgell <tridge@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Gerald (Jerry) Carter <jerry@samba.org>

    • David Bannon <dbannon@samba.org>

    • Guenther Deschner <gd@suse.de> (LDAP updates)

    • John H. Terpstra <jht@samba.org>

    • Volker Lendecke <Volker.Lendecke@SerNet.DE>

    • Guenther Deschner <gd@suse.de> (LDAP updates)

    • John H. Terpstra <jht@samba.org>

    • Jeremy Allison <jra@samba.org>

    • Gerald (Jerry) Carter <jerry@samba.org>

    • Andrew Tridgell <tridge@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • Guenther Deschner <gd@suse.de> (LDAP updates)

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Gerald (Jerry) Carter <jerry@samba.org>

    • Jeremy Allison <jra@samba.org>

    • Guenther Deschner <gd@suse.de> (LDAP updates)

    • Olivier (lem) Lemaire <olem@IDEALX.org>

    • John H. Terpstra <jht@samba.org>

    • Jean François Micouleau

    • Gerald (Jerry) Carter <jerry@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Jeremy Allison <jra@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org> (drawing)

    • Jeremy Allison <jra@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Eric Roseme <eric.roseme@hp.com>

    • Andrew Tridgell <tridge@samba.org>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Rafal Szczesniak <mimir@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org> (drawing)

    • Stephen Langasek <vorlon@netexpress.net>

    • Shirish Kalele <samba@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Kurt Pfeifle <kpfeifle@danka.de>

    • Gerald (Jerry) Carter <jerry@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Kurt Pfeifle <kpfeifle@danka.de>

    • Ciprian Vizitiu <CVizitiu@gbif.org> (drawings)

    • Jelmer R. Vernooij <jelmer@samba.org> (drawings)

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Tim Potter <tpot@samba.org>

    • Simo Sorce (original vfs_skel README)

    • Alexander Bokovoy (original vfs_netatalk docs)

    • Stefan Metzmacher (Update for multiple modules)

    • Tim Potter <tpot@linuxcare.com.au>

    • Andrew Tridgell <tridge@samba.org>

    • Naag Mummaneni <getnag@rediffmail.com> (Notes for Solaris)

    • John Trostel <jtrostel@snapserver.com>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Stephen Langasek <vorlon@netexpress.net>

    • John H. Terpstra <jht@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • TAKAHASHI Motonobu <monyo@home.monyo.com>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Gerald (Jerry) Carter <jerry@samba.org>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Andrew Tridgell <tridge@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • Dan Shearer <dan@samba.org>

    • Gerald (Jerry) Carter <jerry@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • David Bannon <dbannon@samba.org>

    • Dan Shearer <dan@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • Andrew Tridgell <tridge@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Andrew Tridgell <tridge@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Dan Shearer <dan@samba.org>

    • Jim McDonough <jmcd@us.ibm.com> (OS/2)

    • Paul Cochrane <paulc@dth.scot.nhs.uk>

    • Jelmer R. Vernooij <jelmer@samba.org>

    • John H. Terpstra <jht@samba.org>

    • John H. Terpstra <jht@samba.org>

    • Jelmer R. Vernooij <jelmer@samba.org>

    diff --git a/docs/htmldocs/printing.html b/docs/htmldocs/printing.html index 2b0abb56e6..5e7bf473c0 100644 --- a/docs/htmldocs/printing.html +++ b/docs/htmldocs/printing.html @@ -1,157 +1,130 @@ -Chapter 18. Classical Printing Support

    Chapter 18. Classical Printing Support

    Kurt Pfeifle

    Danka Deutschland GmbH

    Gerald (Jerry) Carter

    Samba Team

    May 31, 2003

    Table of Contents

    Features and Benefits
    Technical Introduction
    What happens if you send a Job from a Client
    Printing Related Configuration Parameters
    Parameters Recommended for Use
    A simple Configuration to Print
    Verification of "Settings in Use" with testparm
    A little Experiment to warn you
    Extended Sample Configuration to Print
    Detailed Explanation of the Example's Settings
    The [global] Section
    The [printers] Section
    Any [my_printer_name] Section
    Print Commands
    Default Print Commands for various UNIX Print Subsystems
    Setting up your own Print Commands
    Innovations in Samba Printing since 2.2
    Client Drivers on Samba Server for Point'n'Print
    The [printer$] Section is removed from Samba 3
    Creating the [print$] Share
    Parameters in the [print$] Section
    Subdirectory Structure in [print$]
    Installing Drivers into [print$]
    Setting Drivers for existing Printers with a Client GUI
    Setting Drivers for existing Printers with -rpcclient
    Client Driver Install Procedure
    The first Client Driver Installation
    IMPORTANT! Setting Device Modes on new Printers
    Further Client Driver Install Procedures
    Always make first Client Connection as root or "printer admin"
    Other Gotchas
    Setting Default Print Options for the Client Drivers
    Supporting large Numbers of Printers
    Adding new Printers with the Windows NT APW
    Weird Error Message Cannot connect under a -different Name
    Be careful when assembling Driver Files
    Samba and Printer Ports
    Avoiding the most common Misconfigurations of the Client Driver
    The Imprints Toolset
    What is Imprints?
    Creating Printer Driver Packages
    The Imprints Server
    The Installation Client
    Add Network Printers at Logon without User Interaction
    The addprinter command
    Migration of "Classical" printing to Samba
    Publishing Printer Information in Active Directory or LDAP
    Common Errors
    I give my root password but I don't get access
    My printjobs get spooled into the spooling directory, but then get lost

    Features and Benefits

    -Printing is often a mission-critical service for the users. Samba can +Chapter 18. Classical Printing Support

    Chapter 18. Classical Printing Support

    Kurt Pfeifle

    Danka Deutschland GmbH

    Gerald (Jerry) Carter

    Samba Team

    John H. Terpstra

    Samba Team

    May 31, 2003

    Table of Contents

    Features and Benefits
    Technical Introduction
    Client to Samba Print Job Processing
    Printing Related Configuration Parameters
    Simple Print Configuration
    Verifing Configuration with testparm
    Rapid Configuration Validation
    Extended Printing Configuration
    Detailed Explanation Settings
    Printing Developments Since Samba-2.2
    Point'n'Print Client Drivers on Samba Servers
    The Obsoleted [printer$] Section
    Creating the [print$] Share
    [print$] Section Parameters
    The [print$] Share Directory
    Installing Drivers into [print$]
    Add Printer Wizard Driver Installation
    Installing Print Drivers Using rpcclient
    Client Driver Installation Procedure
    First Client Driver Installation
    Setting Device Modes on New Printers
    Additional Client Driver Installation
    Always Make First Client Connection as root or printer admin
    Other Gotchas
    Setting Default Print Options for Client Drivers
    Supporting Large Numbers of Printers
    Adding New Printers with the Windows NT APW
    Error Message: Cannot connect under a different Name
    Take Care When Assembling Driver Files
    Samba and Printer Ports
    Avoiding Common Client Driver Misconfiguration
    The Imprints Toolset
    What is Imprints?
    Creating Printer Driver Packages
    The Imprints Server
    The Installation Client
    Adding Network Printers without User Interaction
    The addprinter Command
    Migration of Classical Printing to Samba
    Publishing Printer Information in Active Directory or LDAP
    Common Errors
    I Give My Root Password but I Do Not Get Access
    My Print Jobs Get Spooled into the Spooling Directory, but Then Get Lost

    Features and Benefits

    +Printing is often a mission-critical service for the users. Samba can provide this service reliably and seamlessly for a client network consisting of Windows workstations.

    -A Samba print service may be run on a Standalone or a Domain -member server, side by side with file serving functions, or on a -dedicated print server. It can be made as tight or as loosely secured -as needs dictate. Configurations may be simple or complex. Available -authentication schemes are essentially the same as described for file -services in previous chapters. Overall, Samba's printing support is -now able to replace an NT or Windows 2000 print server full-square, -with additional benefits in many cases. Clients may download and -install drivers and printers through their familiar "Point'n'Print" -mechanism. Printer installations executed by "Logon Scripts" are no -problem. Administrators can upload and manage drivers to be used by -clients through the familiar "Add Printer Wizard". As an additional -benefit, driver and printer management may be run from the command line -or through scripts, making it more efficient in case of large numbers -of printers. If a central accounting of print jobs (tracking every -single page and supplying the raw data for all sorts of statistical -reports) is required, this is best supported by CUPS as the print -subsystem underneath the Samba hood. +A Samba print service may be run on a Stand-alone or Domain Member server, +side by side with file serving functions, or on a dedicated print server. +It can be made as tight or as loosely secured as needs dictate. Configurations +may be simple or complex. Available authentication schemes are essentially +the same as described for file services in previous chapters. Overall, +Samba's printing support is now able to replace an NT or Windows 2000 +print server full-square, with additional benefits in many cases. Clients +may download and install drivers and printers through their familiar +“Point'n'Print” mechanism. Printer installations executed by +“Logon Scripts” are no problem. Administrators can upload and +manage drivers to be used by clients through the familiar “Add Printer +Wizard”. As an additional benefit, driver and printer management may +be run from the command line or through scripts, making it more efficient +in case of large numbers of printers. If a central accounting of print jobs +(tracking every single page and supplying the raw data for all sorts of +statistical reports) is required, this function is best supported by +the newer Common UNIX Printing System (CUPS) +as the print subsystem underneath the Samba hood.

    -This chapter deals with the foundations of Samba printing, as they -implemented by the more traditional UNIX (BSD- and System V-style) -printing systems. Many things apply to CUPS, the newer Common UNIX -Printing System, too; so if you use CUPS, you might be tempted to jump -to the next chapter -- but you will certainly miss a few things if you -do so. Better to read this chapter too. +This chapter deals with the foundations of Samba printing as they +are implemented by the more traditional UNIX (BSD- and System V-style) +printing systems. Many things covered in this chapter apply also to CUPS. +If you use CUPS, you may be tempted +to jump to the next chapter but you will certainly miss a few things if +you do. It is recommended that you read this chapter as well as .

    Note

    -Most of the given examples have been verified on Windows XP +Most of the following examples have been verified on Windows XP Professional clients. Where this document describes the responses to -commands given, bear in mind that Windows 2000 clients are very -similar, but may differ in details. Windows NT is somewhat different +commands given, bear in mind that Windows 200x/XP clients are quite +similar, but may differ in minor details. Windows NT is somewhat different again. -

    Technical Introduction

    -Samba's printing support always relies on the installed print -subsystem of the UNIX OS it runs on. Samba is a "middleman". It takes -printfiles from Windows (or other SMB) clients and passes them to the -real printing system for further processing. Therefore it needs to -"talk" to two sides: to the Windows print clients and to the UNIX -printing system. Hence we must differentiate between the various -client OS types each of which behave differently, as well as the -various UNIX print subsystems, which themselves have different -features and are accessed differently. This part of the Samba HOWTO -Collection deals with the "traditional" way of UNIX printing first; -the next chapter covers in great detail the more modern -Common UNIX Printing System -(CUPS). - -

    Important

    CUPS users, be warned: don't just jump on to the next -chapter. You might miss important information contained only -here!

    -

    What happens if you send a Job from a Client

    -To successfully print a job from a Windows client via a Samba -print server to a UNIX printer, there are 6 (potentially 7) -stages: -

    1. Windows opens a connection to the printer share

    2. Samba must authenticate the user

    3. Windows sends a copy of the printfile over the network -into Samba's spooling area

    4. Windows closes the connection again

    5. Samba invokes the print command to hand the file over -to the UNIX print subsystem's spooling area

    6. The UNIX print subsystem processes the print -job

    7. The printfile may need to be explicitly deleted -from the Samba spooling area.

    Printing Related Configuration Parameters

    -There are a number of configuration parameters in - controlling Samba's printing -behaviour. Please also refer to the man page for smb.conf to -acquire an overview about these. As with other parameters, there are -Global Level (tagged with a "G" in the listings) and -Service Level ("S") parameters. -

    Service Level Parameters

    These may go into the -[global] section of smb.conf. -In this case they define the default -behaviour of all individual or service level shares (provided those -don't have a different setting defined for the same parameter, thus -overriding the global default).

    Global Parameters

    These may not go into individual -shares. If they go in by error, the "testparm" utility can discover -this (if you run it) and tell you so.

    Parameters Recommended for Use

    The following smb.conf parameters directly -related to printing are used in Samba. See also the -smb.conf man page for detailed explanations: -

    Global level parameters: addprinter command, -deleteprinter command, -disable spoolss, -enumports command, -load printers, -lpq cache time, -os2 driver map, -printcap name, printcap, -show add printer wizard, -total print jobs, -use client driver. -

    Service level parameters: hosts allow, -hosts deny, -lppause command, -lpq command, -lpresume command, -lprm command, -max print jobs, -min print space, -print command, -printable, print ok , -printer name, printer, -printer admin, -printing = [cups|bsd|lprng...], -queuepause command, -queueresume command, -total print jobs. +

    Technical Introduction

    +Samba's printing support always relies on the installed print subsystem +of the UNIX OS it runs on. Samba is a “middleman.” It takes +print files from Windows (or other SMB) clients and passes them to the real +printing system for further processing, therefore, it needs to communicate with +both sides: the Windows print clients and the UNIX printing system. Hence, we +must differentiate between the various client OS types, each of which behave +differently, as well as the various UNIX print subsystems, which themselves +have different features and are accessed differently. +

    +This deals with the traditional way of UNIX printing. The next chapter +covers in great detail the more modern Common UNIX Printing +System (CUPS). +

    Important

    CUPS users, be warned: do not just jump on to the next +chapter. You might miss important information only found here! +

    +It is apparent from postings on the Samba mailing list that print configuration +is one of the most problematic aspects of Samba administration today. Many +new Samba administrators have the impression that Samba performs some sort +of print processing. Rest assured, Samba does not peform any type of print +processing. It does not do any form of print filtering.

    -Samba's printing support implements the Microsoft Remote Procedure -Calls (MS-RPC) methods for printing. These are used by Windows NT (and -later) print servers. The old "LanMan" protocol is still supported as -a fallback resort, and for older clients to use. More details will -follow further beneath. -

    A simple Configuration to Print

    -Here is a very simple example configuration for print related settings -in the file. If you compare it with your own system's , you probably find some -additional parameters included there (as pre-configured by your OS -vendor). Further below is a discussion and explanation of the -parameters. Note, that this example doesn't use many parameters. +Samba obtains from its clients a data stream (print job) that it spools to a +local spool area. When the entire print job has been received, Samba invokes +a local UNIX/Linux print command and passes the spooled file to it. It is +up to the local system printing subsystems to correctly process the print +job and to submit it to the printer. +

    Client to Samba Print Job Processing

    +Successful printing from a Windows client via a Samba print server to a UNIX +printer involves six (potentially seven) stages: +

    1. Windows opens a connection to the printer share.

    2. Samba must authenticate the user.

    3. Windows sends a copy of the print file over the network +into Samba's spooling area.

    4. Windows closes the connection.

    5. Samba invokes the print command to hand the file over +to the UNIX print subsystem's spooling area.

    6. The UNIX print subsystem processes the print job.

    7. The print file may need to be explicitly deleted +from the Samba spooling area. This item depends on your print spooler +configuration settings.

    Printing Related Configuration Parameters

    +There are a number of configuration parameters to control Samba's +printing behavior. Please refer to the man page for smb.conf for an +overview of these. As with other parameters, there are Global Level +(tagged with a G in the listings) and Service Level +(S) parameters. +

    Global Parameters

    These may not go into + individual share definitions. If they go in by error, + the testparm utility can discover this + (if you run it) and tell you so. +

    Service Level Parameters

    These may be specified in the + [global] section of smb.conf. + In this case they define the default behavior of all individual + or service level shares (provided they do not have a different + setting defined for the same parameter, thus overriding the + global default). +

    Simple Print Configuration

    + shows a simple printing configuration. +If you compare this with your own, you may find +additional parameters that have been pre-configured by your OS +vendor. Below is a discussion and explanation of the +parameters. This example does not use many parameters. However, in many environments these are enough to provide a valid -smb.conf file which enables all clients to print. -

    Example 18.1. Simple configuration with BSD printing

    [global]
    printing = bsd
    load printers = yes
    [printers]
    path = /var/spool/samba
    printable = yes
    public = yes
    writable = no

    -This is only an example configuration. Samba assigns default values to all -configuration parameters. On the whole the defaults are conservative and -sensible. When a parameter is specified in the smb.conf file this overwrites -the default value. The testparm utility when run as root -is capable of reporting all setting, both default as well as smb.conf file -settings. Testparm gives warnings for all mis-configured -settings. The complete output is easily 340 lines and more, so you may want -to pipe it through a pager program. +smb.conf file that enables all clients to print. +

    +

    Example 18.1. Simple configuration with BSD printing

    [global]
    printing = bsd
    load printers = yes
    [printers]
    path = /var/spool/samba
    printable = yes
    public = yes
    writable = no

    +This is only an example configuration. Samba assigns default values to +all configuration parameters. The defaults are conservative +and sensible. When a parameter is specified in the smb.conf file, this +overwrites the default value. The testparm utility when +run as root is capable of reporting all setting, both default as well as +smb.conf file settings. Testparm gives warnings for all +misconfigured settings. The complete output is easily 340 lines and more, +so you may want to pipe it through a pager program.

    The syntax for the configuration file is easy to grasp. You should -know that is not very picky about its -syntax. It has been explained elsewhere in this document. A short -reminder: It even tolerates some spelling errors (like "browsable" -instead of "browseable"). Most spelling is case-insensitive. Also, you -can use "Yes|No" or "True|False" for boolean settings. Lists of names +know that is not very picky about its syntax. As has been explained +elsewhere in this document, Samba tolerates some spelling errors (such +as browsable instead of +browseable), and spelling is +case-insensitive. It is permissible to use Yes/No +or True/False for Boolean settings. Lists of names may be separated by commas, spaces or tabs. -

    Verification of "Settings in Use" with testparm

    -To see all (or at least most) printing related settings in Samba, -including the implicitly used ones, try the command outlined below -(hit "ENTER" twice!). It greps for all occurrences of "lp", "print", -"spool", "driver", "ports" and "[" in testparm's output and gives you -a nice overview about the running smbd's print configuration. (Note -that this command does not show individually created printer shares, -or the spooling paths in each case). Here is the output of my Samba -setup, with exactly the same settings in -as shown above: +

    Verifing Configuration with testparm

    +To see all (or at least most) printing-related settings in Samba, including +the implicitly used ones, try the command outlined below. This command greps +for all occurrences of lp, print, spool, driver, ports +and [ in testparms output. This provides a convenient +overview of the running smbd print configuration. This +command does not show individually created printer shares or the spooling +paths they may use. Here is the output of my Samba setup, with settings +shown in :

    -root# testparm -v | egrep "(lp|print|spool|driver|ports|\[)"
    - Load smb config files from /etc/samba/smb.conf.simpleprinting
    - Processing section "[homes]"
    - Processing section "[printers]"
    +root# testparm -s -v | egrep "(lp|print|spool|driver|ports|\[)"
    + Load smb config files from /etc/samba/smb.conf
    + Processing section "[homes]"
    + Processing section "[printers]"
      
      [global]
             smb ports = 445 139
    @@ -183,73 +156,66 @@ as shown above:
      [printers]
             path = /var/spool/samba
             printable = Yes
    -
     

    +

    You can easily verify which settings were implicitly added by Samba's -default behaviour. Don't forget about this point: it may +default behavior. Remember: it may be important in your future dealings with Samba. -

    Note

    testparm in samba 3 behaves differently from 2.2.x: used -without the "-v" switch it only shows you the settings actually -written into ! To see the complete -configuration used, add the "-v" parameter to testparm.

    A little Experiment to warn you

    +

    Note

    testparm in Samba-3 behaves differently from that in 2.2.x: used +without the “-v” switch it only shows you the settings actually +written into! To see the complete +configuration used, add the “-v” parameter to testparm.

    Rapid Configuration Validation

    Should you need to troubleshoot at any stage, please always come back -to this point first and verify if "testparm" shows the parameters you -expect! To give you an example from personal experience as a warning, -try to just "comment out" the load printers" +to this point first and verify if testparm shows the parameters you +expect. To give you a warning from personal experience, +try to just comment out the load printers parameter. If your 2.2.x system behaves like mine, you'll see this:

    -root# grep "load printers" /etc/samba/smb.conf
    - #      load printers = Yes
    - # This setting is commented ooouuuuut!!
    +root# grep "load printers" /etc/samba/smb.conf
    +        #  load printers = Yes
    +        # This setting is commented out!!
      
    -root# testparm -v /etc/samba/smb.conf | egrep "(load printers)"
    +root# testparm -v /etc/samba/smb.conf | egrep "(load printers)"
             load printers = Yes
    -
     

    -Despite my imagination that the commenting out of this setting should -prevent Samba from publishing my printers, it still did! Oh Boy -- it -cost me quite some time to find out the reason. But I am not fooled -any more... at least not by this ;-) +I assumed that commenting out of this setting should prevent Samba from +publishing my printers, but it still did. It took some time to figure out +the reason. But I am no longer fooled ... at least not by this.

    -root# grep -A1 "load printers" /etc/samba/smb.conf
    +root# grep -A1 "load printers" /etc/samba/smb.conf
             load printers = No
    -        # This setting is what I mean!!
    - #      load printers = Yes
    -        # This setting is commented ooouuuuut!!
    +        # The above setting is what I want!
    +        #  load printers = Yes
    +        # This setting is commented out!
     
    -root# testparm -v smb.conf.simpleprinting | egrep "(load printers)"
    +root# testparm -s -v smb.conf.simpleprinting | egrep "(load printers)"
             load printers = No
     
     

    -Only when setting the parameter explicitly to -"load printers = No" -would Samba recognize my intentions. So my strong advice is: -

    • Never rely on "commented out" parameters!

    • Always set it up explicitly as you intend it to +Only when the parameter is explicitly set to +load printers = No +would Samba conform with my intentions. So, my strong advice is: +

      • Never rely on commented out parameters.

      • Always set parameters explicitly as you intend them to behave.

      • Use testparm to uncover hidden -settings which might not reflect your intentions.

      -You can have a working Samba print configuration with this -minimal : +settings that might not reflect your intentions.

    +The following is the most minimal configuration file:

     root# cat /etc/samba/smb.conf-minimal
             [printers]
    -
     

    -This example should show you that you can use testparm to test any -filename for fitness as a Samba configuration. Actually, we want to -encourage you not to change your - on a working system (unless you know -exactly what you are doing)! Don't rely on an assumption that changes -will only take effect after you re-start smbd! This is not the -case. Samba re-reads its every 60 -seconds and on each new client connection. You might have to face -changes for your production clients that you didn't intend to apply at -this time! You will now note a few more interesting things. Let's now -ask testparm what the Samba print configuration -would be, if you used this minimalistic file as your real -: +This example should show that you can use testparm to test any Samba +configuration file. Actually, we encourage you not +to change your working system (unless you know exactly what you are +doing). Don't rely on the assumption that changes will only take effect after +you re-start smbd! This is not the case. Samba re-reads it every 60 seconds +and on each new client connection. You might have to face changes for your +production clients that you didn't intend to apply. You will now +note a few more interesting things; testparm is useful to +identify what the Samba print configuration would be if you used this minimalistic +configuration. Here is what you can expect to find:

    -root# testparm -v smb.conf-minimal | egrep "(print|lpq|spool|driver|ports|[)"
    - Processing section "[printers]"
    +root# testparm -v smb.conf-minimal | egrep "(print|lpq|spool|driver|ports|[)"
    + Processing section "[printers]"
      WARNING: [printers] service MUST be printable!
      No path in service printers - using /tmp
     
    @@ -272,675 +238,568 @@ would be, if you used this minimalistic file as your real
             lpq command = lpq -P%p
             printer name =
             use client driver = No
    +
      [printers]
             printable = Yes
     
     

    -testparm issued 2 warnings: -

    • because we didn't specify the -[printers] section as printable, -and

    • because we didn't tell it which spool directory to -use.

    -However, this was not fatal, and samba will default to values that -will work here. Please, don't rely on this and don't use this -example! This was only meant to make you careful to design and specify -your setup to be what you really want it to be. The outcome on your -system may vary for some parameters, since you may have a Samba built -with a different compile-time configuration. -Warning: don't put a comment sign at -the end of a valid line. It -will cause the parameter to be ignored (just as if you had put the -comment sign at the front). At first I regarded this as a bug in my -Samba version(s). But the man page states: “Internal whitespace -in a parameter value is retained verbatim.” This means that a -line consisting of, for example, -

    # This defines LPRng as the printing system"
    printing = lprng

    -will regard the whole of the string after the "=" -sign as the value you want to define. And this is an invalid value -that will be ignored, and a default value used instead.] -

    Extended Sample Configuration to Print

    - In the extended BSD configuration example we show a more verbose example configuration for print related - settings in BSD-printing style environment . Below is a discussion -and explanation of the various parameters. We chose to use BSD-style -printing here, because we guess it is still the most commonly used -system on legacy Linux installations (new installs now predominantly -have CUPS, which is discussed entirely in the next chapter of this -document). Note, that this example explicitly names many parameters -which don't need to be specified because they are set by default. You -might be able to do with a leaner smb.conf file.

    Example 18.2. Extended configuration with BSD printing

    [global]
    printing = bsd
    load printers = yes
    show add printer wizard = yes
    printcap name = /etc/printcap
    printer admin = @ntadmin, root
    total print jobs = 100
    lpq cache time = 20
    use client driver = no
    [printers]
    comment = All Printers
    printable = yes
    path = /var/spool/samba
    browseable = no
    guest ok = yes
    public = yes
    read only = yes
    writable = no
    [my_printer_name]
    comment = Printer with Restricted Access
    path = /var/spool/samba_my_printer
    printer admin = kurt
    browseable = yes
    printable = yes
    writeable = no
    hosts allow = 0.0.0.0
    hosts deny = turbo_xp, 10.160.50.23, 10.160.51.60
    guest ok = no

    -This also is only an example configuration. You -may not find all the settings in your own - (as pre-configured by your OS -vendor). Many configuration parameters, if not explicitly set to a -specific value, are used and set by Samba implicitly to its own -default, because these have been compiled in. To see all settings, let -root use the testparm -utility. testparm also gives warnings if you have -mis-configured certain things.. -

    Detailed Explanation of the Example's Settings

    -Following is a discussion of the settings from above shown example. -

    The [global] Section

    -The [global] section is one of 4 special +testparm issued two warnings: +

    • We did not specify the [printers] section as printable.

    • We did not tell Samba which spool directory to use.

    +However, this was not fatal and Samba will default to values that will +work. Please, do not rely on this and do not use this example. This was +included to encourage you to be careful to design and specify your setup to do +precisely what you require. The outcome on your system may vary for some +parameters given, since Samba may have been built with different compile-time +options. Warning: do not put a comment sign +at the end of a valid line. It will cause the parameter +to be ignored (just as if you had put the comment sign at the front). At first +I regarded this as a bug in my Samba versions. But the man page clearly says: +“Internal whitespace in a parameter value is retained verbatim.” +This means that a line consisting of, for example: +

    # This defines LPRng as the printing system
    printing = lprng

    +will regard the whole of the string after the +“=” sign as the value you want to +define. This is an invalid value that will be ignored and a default +value will be +used in its place. +

    Extended Printing Configuration

    +In we show a more verbose example configuration +for print-related settings in a BSD-style printing environment. What follows +is a discussion and explanation of the various parameters. We chose to +use BSD-style printing here because it is still the most commonly used +system on legacy UNIX/Linux installations. New installations predominantly +use CUPS, which is discussed in a separate chapter. explicitly +names many parameters that do not need to be specified because they are set +by default. You could use a much leaner smb.conf file. Alternately, you can use +testparm or SWAT to optimize the smb.conf +file to remove all parameters that are set at default. +

    Example 18.2. Extended BSD Printing Configuration

    [global]
    printing = bsd
    load printers = yes
    show add printer wizard = yes
    printcap name = /etc/printcap
    printer admin = @ntadmin, root
    total print jobs = 100
    lpq cache time = 20
    use client driver = no
    [printers]
    comment = All Printers
    printable = yes
    path = /var/spool/samba
    browseable = no
    guest ok = yes
    public = yes
    read only = yes
    writable = no
    [my_printer_name]
    comment = Printer with Restricted Access
    path = /var/spool/samba_my_printer
    printer admin = kurt
    browseable = yes
    printable = yes
    writeable = no
    hosts allow = 0.0.0.0
    hosts deny = turbo_xp, 10.160.50.23, 10.160.51.60
    guest ok = no

    +This is an example configuration. You may not find all the settings that are in +the confioguration file that was provided by the OS vendor. Samba configuration +parameters, if not explicitly set default to a sensible value. +To see all settings, as root use the testparm +utility. testparm gives warnings for misconfigured settings. +

    Detailed Explanation Settings

    +The following is a discussion of the settings from above shown example. +

    The [global] Section

    +The [global] section is one of four special sections (along with [[homes], -[printers] and -[print$]...) It contains all parameters which -apply to the server as a whole. It is the place for parameters which -have only a "global" meaning. It may also contain service level -parameters which then define default settings for all other -sections and shares. This way you can simplify the configuration and -avoid setting the same value repeatedly. (Within each individual -section or share you may however override these globally set "share -level" settings and specify other values). -

    printing = bsd

    this causes Samba to use default print commands -applicable for the BSD (a.k.a. RFC 1179 style or LPR/LPD) printing -system. In general, the "printing" parameter informs Samba about the -print subsystem it should expect. Samba supports CUPS, LPD, LPRNG, -SYSV, HPUX, AIX, QNX and PLP. Each of these systems defaults to a -different print command (and other queue control -commands).

    Caution

    The printing parameter is -normally a service level parameter. Since it is included here in the -[global] section, it will take effect for all -printer shares that are not defined differently. Samba 3 no longer -supports the SOFTQ printing system.

    load printers = yes

    this tells Samba to create automatically all -available printer shares. "Available" printer shares are discovered by -scanning the printcap file. All created printer shares are also loaded -for browsing. If you use this parameter, you do not need to specify -separate shares for each printer. Each automatically created printer -share will clone the configuration options found in the -[printers] section. (A load printers -= no setting will allow you to specify each UNIX printer -you want to share separately, leaving out some you don't want to be -publicly visible and available).

    show add printer wizard = yes

    this setting is normally -enabled by default (even if the parameter is not written into the -). It makes the Add Printer Wizard icon -show up in the Printers folder of the Samba host's -share listing (as shown in Network Neighbourhood or -by the net view command). To disable it, you need to -explicitly set it to no (commenting it out -will not suffice!). The Add Printer Wizard lets you upload printer -drivers to the [print$] share and associate it -with a printer (if the respective queue exists there before the -action), or exchange a printer's driver against any other previously -uploaded driver.

    total print jobs = 100

    this setting sets the upper limit to 100 print jobs -being active on the Samba server at any one time. Should a client -submit a job which exceeds this number, a “no more space -available on server” type of error message will be returned by -Samba to the client. A setting of "0" (the default) means there is -no limit at all! -

    printcap name = /etc/printcap

    this tells Samba where to look for a list of -available printer names. (If you use CUPS, make sure that a printcap -file is written: this is controlled by the "Printcap" directive of -cupsd.conf). -

    printer admin = @ntadmin

    members of the ntadmin group should be able to add -drivers and set printer properties ("ntadmin" is only an example name, -it needs to be a valid UNIX group name); root is implicitly always a -printer admin. The "@" sign precedes group names in -. A printer admin can do anything to -printers via the remote administration interfaces offered by MS-RPC -(see below). Note that the printer admin -parameter is normally a share level parameter, so you may associate -different groups to different printer shares in larger installations, -if you use the printer admin parameter on the -share levels). -

    lpq cache time = 20

    this controls the cache time for the results of the -lpq command. It prevents the lpq command being called too often and -reduces load on a heavily used print server. -

    use client driver = no

    if set to yes, this setting only -takes effect for Win NT/2k/XP clients (and not for Win 95/98/ME). Its -default value is No (or False). -It must not be enabled on print shares -(with a yes or true setting) which -have valid drivers installed on the Samba server! For more detailed -explanations see the man page of smb.conf. -

    The [printers] Section

    -This is the second special section. If a section with this name -appears in the smb.conf, users are able to -connect to any printer specified in the Samba host's printcap file, -because Samba on startup then creates a printer share for every -printername it finds in the printcap file. You could regard this -section as a general convenience shortcut to share all printers with -minimal configuration. It is also a container for settings which -should apply as default to all printers. (For more details see the -smb.conf man page.) Settings inside this -container must be share level parameters. -

    comment = All printers

    the comment is shown next to -the share if a client queries the server, either via Network -Neighbourhood or with the net view command to list -available shares. -

    printable = yes

    please note well, that the -[printers] service must be -declared as printable. If you specify otherwise, smbd will refuse to -load at startup. This parameter allows -connected clients to open, write to and submit spool files into the -directory specified with the path parameter for -this service. It is used by Samba to differentiate printer shares from -file shares.

    path = /var/spool/samba

    this must point to a directory used by Samba to spool -incoming print files. It must not be the same as the spool -directory specified in the configuration of your UNIX print -subsystem! The path would typically point to a directory -which is world writeable, with the "sticky" bit set to it. -

    browseable = no

    this is always set to no if -printable = yes. It makes the -[printer] share itself invisible in the -list of available shares in a net view command or -in the Explorer browse list. (Note that you will of course see the -individual printers). -

    guest ok = yes

    -if set to yes, then no password is required to -connect to the printers service. Access will be granted with the -privileges of the guest account. On many systems the -guest account will map to a user named "nobody". This user is in the UNIX -passwd file with an empty password, but with no valid UNIX login. -(Note: on some systems the guest account might not have the -privilege to be able to print. Test this by logging in as your -guest user using su - guest and run a system print -command like -

    lpr -P printername /etc/motd

    public = yes

    this is a synonym for guest ok = yes. Since we have guest ok = yes, -it really doesn't need to be here! (This leads to the interesting -question: “What, if I by accident have to contradictory settings -for the same share?” The answer is: the last one encountered by -Samba wins. The "winner" is shown by testparm. Testparm doesn't -complain about different settings of the same parameter for the same -share! You can test this by setting up multiple lines for the "guest -account" parameter with different usernames, and then run testparm to -see which one is actually used by Samba.) -

    read only = yes

    this normally (for other types of shares) prevents -users creating or modifying files in the service's directory. However, -in a "printable" service, it is always allowed to -write to the directory (if user privileges allow the connection), but -only via print spooling operations. "Normal" write operations are not -allowed.

    writeable = no

    -synonym for read only = yes -

    Any [my_printer_name] Section

    -If a section appears in the , which is -tagged as printable = yes, Samba presents it as -a printer share to its clients. Note, that Win95/98/ME clients may -have problems with connecting or loading printer drivers if the share -name has more than 8 characters! Also be very careful if you give a -printer the same name as an existing user or file share name: upon a -client's connection request to a certain sharename, Samba always tries -to find file shares with that name first; if it finds one, it will -connect to this and will never ultimately connect to a printer with -the same name! -

    comment = Printer with Restricted Access

    the comment says it all. -

    path = /var/spool/samba_my_printer

    here we set the spooling area for this printer to -another directory than the default. It is not a requirement to set it -differently, but the option is available. -

    printer admin = kurt

    the printer admin definition is different for this -explicitly defined printer share from the general -[printers] share. It is not a requirement; we -did it to show that it is possible if you want it. -

    browseable = yes

    we also made this printer browseable (so that the -clients may conveniently find it when browsing the Network -Neighbourhood). -

    printable = yes

    see explanation in last subsection. -

    writeable = no

    see explanation in last subsection. -

    hosts allow = 10.160.50.,10.160.51.

    here we exercise a certain degree of access control -by using the hosts allow and hosts deny parameters. Note, that -this is not by any means a safe bet. It is not a way to secure your -printers. This line accepts all clients from a certain subnet in a -first evaluation of access control -

    hosts deny = turbo_xp,10.160.50.23,10.160.51.60

    all listed hosts are not allowed here (even if they -belong to the "allowed subnets"). As you can see, you could name IP -addresses as well as NetBIOS hostnames -here. -

    guest ok = no

    this printer is not open for the guest account! -

    Print Commands

    -In each section defining a printer (or in the -[printers] section), a print -command parameter may be defined. It sets a command to -process the files which have been placed into the Samba print spool -directory for that printer. (That spool directory was, if you -remember, set up with the path -parameter). Typically, this command will submit the spool file to the -Samba host's print subsystem, using the suitable system print -command. But there is no requirement that this needs to be the -case. For debugging purposes or some other reason you may want to do -something completely different than "print" the file. An example is a -command that just copies the print file to a temporary location for -further investigation when you need to debug printing. If you craft -your own print commands (or even develop print command shell scripts), -make sure you pay attention to the need to remove the files from the -Samba spool directory. Otherwise your hard disk may soon suffer from -shortage of free space. -

    Default Print Commands for various UNIX Print Subsystems

    -You learned earlier on, that Samba in most cases uses its built-in -settings for many parameters if it can not find an explicitly stated -one in its configuration file. The same is true for the -print command. The default print command varies -depending on the printing parameter -setting. In the commands listed below, you will notice some parameters -of the form %X where X is -p, s, J etc. These letters stand for -"printername", "spoolfile" and "job ID" respectively. They are -explained in more detail further below. Here is an overview (excluding -the special case of CUPS, which is discussed in the next chapter): -

    If this setting is active......this is used in lieu of an explicit command:
    printing = bsd|aix|lprng|plpprint command is lpr -r -P%p %s
    printing = sysv|hpuxprint command is lp -c -P%p %s; rm %s
    printing = qnxprint command is lp -r -P%p -s %s
    printing = bsd|aix|lprng|plplpq command is lpq -P%p
    printing = sysv|hpuxlpq command is lpstat -o%p
    printing = qnxlpq command is lpq -P%p
    printing = bsd|aix|lprng|plplprm command is lprm -P%p %j
    printing = sysv|hpuxlprm command is cancel %p-%j
    printing = qnxlprm command is cancel %p-%j
    printing = bsd|aix|lprng|plplppause command is lp -i %p-%j -H hold
    printing = sysv|hpuxlppause command (...is empty)
    printing = qnxlppause command (...is empty)
    printing = bsd|aix|lprng|plplpresume command is lp -i %p-%j -H resume
    printing = sysv|hpuxlpresume command (...is empty)
    printing = qnxlpresume command (...is empty)

    -We excluded the special CUPS case here, because it is discussed in the -next chapter. Just a short summary. For printing = -CUPS: If SAMBA is compiled against libcups, it uses the -CUPS API to submit jobs, etc. (It is a good idea also to set -printcap = cups in case your -cupsd.conf is set to write its autogenerated -printcap file to an unusual place). Otherwise Samba maps to the System -V printing commands with the -oraw option for printing, i.e. it uses -lp -c -d%p -oraw; rm %s With printing = -cups , and if SAMBA is compiled against libcups, any -manually set print command will be ignored! -

    -Having listed the above mappings here, you should note that there used -to be a bug in recent 2.2.x versions which -prevented the mapping from taking effect. It lead to the -"bsd|aix|lprng|plp" settings taking effect for all other systems, for -the most important commands (the print command, the -lpq command and the lprm -command). The lppause command and the -lpresume command remained empty. Of course, these -commands worked on bsd|aix|lprng|plp but they didn't work on -sysv|hpux|qnx systems. To work around this bug, you need to -explicitly set the commands. Use testparm -v to -check which command takes effect. Then check that this command is -adequate and actually works for your installed print subsystem. It is -always a good idea to explicitly set up your configuration files the -way you want them to work and not rely on any built-in defaults. -

    Setting up your own Print Commands

    -After a print job has finished spooling to a service, the -print command will be used by Samba via a -system() call to process the spool file. Usually -the command specified will submit the spool file to the host's -printing subsystem. But there is no requirement at all that this must -be the case. The print subsystem will probably not remove the spool -file on its own. So whatever command you specify on your own you -should ensure that the spool file is deleted after it has been -processed. +[printers] +and [print$]...). The +[global] contains all parameters which apply +to the server as a whole. It is the place for parameters that have only a +global meaning. It may also contain service level parameters that then define +default settings for all other sections and shares. This way you can simplify +the configuration and avoid setting the same value repeatedly. (Within each +individual section or share you may, however, override these globally set +share settings and specify other values). +

    printing = bsd

    Causes Samba to use default print commands + applicable for the BSD (also known as RFC 1179 style or LPR/LPD) printing + system. In general, the printing parameter informs Samba about the + print subsystem it should expect. Samba supports CUPS, LPD, LPRNG, + SYSV, HPUX, AIX, QNX, and PLP. Each of these systems defaults to a + different print command (and other queue control + commands).

    Caution

    The printing parameter is + normally a service level parameter. Since it is included here in the + [global] section, it will take effect for all + printer shares that are not defined differently. Samba-3 no longer + supports the SOFTQ printing system.

    load printers = yes

    Tells Samba to create automatically all + available printer shares. Available printer shares are discovered by + scanning the printcap file. All created printer shares are also loaded + for browsing. If you use this parameter, you do not need to specify + separate shares for each printer. Each automatically created printer + share will clone the configuration options found in the + [printers] section. (The load printers + = no setting will allow you to specify each UNIX printer + you want to share separately, leaving out some you do not want to be + publicly visible and available).

    show add printer wizard = yes

    Setting is normally enabled by default (even if the parameter is not specified in smb.conf). + It causes the Add Printer Wizard icon to appear + in the Printers folder of the Samba host's + share listing (as shown in Network Neighborhood or + by the net view command). To disable it, you need to + explicitly set it to no (commenting it out + will not suffice). The Add Printer Wizard lets you upload printer + drivers to the [print$] share and associate it + with a printer (if the respective queue exists before the + action), or exchange a printer's driver against any other previously + uploaded driver.

    total print jobs = 100

    Sets the upper limit to 100 print jobs + being active on the Samba server at any one time. Should a client + submit a job that exceeds this number, a “no more space + available on server” type of error message will be returned by + Samba to the client. A setting of zero (the default) means there is + no limit at all. +

    printcap name = /etc/printcap

    Tells Samba where to look for a list of + available printer names. Where CUPS is used, make sure that a printcap + file is written. This is controlled by the Printcap directive in the + cupsd.conf file. +

    printer admin = @ntadmin

    Members of the ntadmin group should be able to add + drivers and set printer properties (ntadmin is only an example name, + it needs to be a valid UNIX group name); root is implicitly always a + printer admin. The @ sign precedes group names in the + /etc/group. A printer admin can do anything to + printers via the remote administration interfaces offered by MS-RPC + (see below). In larger installations, the printer admin + parameter is normally a per-share parameter. This permits different groups to administer each printer share. +

    lpq cache time = 20

    Controls the cache time for the results of the + lpq command. It prevents the lpq command being called too often and + reduces the load on a heavily used print server. +

    use client driver = no

    If set to yes, only + takes effect for Windows NT/200x/XP clients (and not for Win 95/98/ME). Its + default value is No (or False). + It must not be enabled on print shares + (with a yes or true setting) that + have valid drivers installed on the Samba server. For more detailed + explanations see the smb.conf man page. +

    The [printers] Section

    +This is the second special section. If a section with this name appears in +the smb.conf, users are able to connect to any printer specified in the +Samba host's printcap file, because Samba on startup then creates a printer +share for every printername it finds in the printcap file. You could regard +this section as a general convenience shortcut to share all printers with +minimal configuration. It is also a container for settings that should +apply as default to all printers. (For more details see the smb.conf +man page.) Settings inside this container must be Share Level parameters. +

    comment = All printers

    + The comment is shown next to the share if + a client queries the server, either via Network Neighborhood or with + the net view command to list available shares. +

    printable = yes

    + The [printers] service must + be declared as printable. If you specify otherwise, smbd will refuse to load at + startup. This parameter allows connected clients to open, write to and submit spool files + into the directory specified with the path + parameter for this service. It is used by Samba to differentiate printer shares from + file shares. +

    path = /var/spool/samba

    + Must point to a directory used by Samba to spool incoming print files. It + must not be the same as the spool directory specified in the configuration of your UNIX + print subsystem! The path typically points to a directory that is world + writeable, with the “sticky” bit set to it. +

    browseable = no

    + Is always set to no if + printable = yes. It makes + the [printer] share itself invisible in the list of + available shares in a net view command or in the Explorer browse + list. (You will of course see the individual printers). +

    guest ok = yes

    + If this parameter is set to yes, no password is required to + connect to the printer's service. Access will be granted with the privileges of the + guest account. On many systems the guest + account will map to a user named “nobody”. This user will usually be found + in the UNIX passwd file with an empty password, but with no valid UNIX login. (On some + systems the guest account might not have the privilege to be able to print. Test this + by logging in as your guest user using su - guest and run a system + print command like: +

    + lpr -P printername /etc/motd +

    public = yes

    + Is a synonym for guest ok = yes. + Since we have guest ok = yes, it + really does not need to be here. (This leads to the interesting question: “What if I + by accident have two contradictory settings for the same share?” The answer is the + last one encountered by Samba wins. Testparm does not complain about different settings + of the same parameter for the same share. You can test this by setting up multiple + lines for the guest account parameter with different usernames, + and then run testparm to see which one is actually used by Samba.) +

    read only = yes

    + Normally (for other types of shares) prevents users from creating or modifying files + in the service's directory. However, in a “printable” service, it is + always allowed to write to the directory (if user privileges allow the + connection), but only via print spooling operations. Normal write operations are not permitted. +

    writeable = no

    + Is a synonym for read only = yes. +

    Any [my_printer_name] Section

    +If a section appears in the smb.conf file, which when given the parameter +printable = yes causes Samba to configure it +as a printer share. Windows 9x/Me clients may have problems with connecting or loading printer drivers +if the share name has more than eight characters. Do not name a printer share with a name that may conflict +with an existing user or file share name. On Client connection requests, Samba always tries to find file +shares with that name first. If it finds one, it will connect to this and will not connect +to a printer with the same name! +

    comment = Printer with Restricted Access

    + The comment says it all. +

    path = /var/spool/samba_my_printer

    + Sets the spooling area for this printer to a directory other than the default. It is not + necessary to set it differently, but the option is available. +

    printer admin = kurt

    + The printer admin definition is different for this explicitly defined printer share from the general + [printers] share. It is not a requirement; we + did it to show that it is possible. +

    browseable = yes

    + This makes the printer browseable so the clients may conveniently find it when browsing the + Network Neighborhood. +

    printable = yes

    + See . +

    writeable = no

    + See . +

    hosts allow = 10.160.50.,10.160.51.

    + Here we exercise a certain degree of access control by using the hosts allow and hosts deny + parameters. This is not by any means a safe bet. It is not a way to secure your + printers. This line accepts all clients from a certain subnet in a first evaluation of + access control. +

    hosts deny = turbo_xp,10.160.50.23,10.160.51.60

    + All listed hosts are not allowed here (even if they belong to the allowed subnets). As + you can see, you could name IP addresses as well as NetBIOS hostnames here. +

    guest ok = no

    + This printer is not open for the guest account. +

    Print Commands

    +In each section defining a printer (or in the [printers] section), +a print command parameter may be defined. It sets a command to process the files +that have been placed into the Samba print spool directory for that printer. (That spool directory was, +if you remember, set up with the path parameter). Typically, +this command will submit the spool file to the Samba host's print subsystem, using the suitable system +print command. But there is no requirement that this needs to be the case. For debugging or +some other reason, you may want to do something completely different than print the file. An example is a +command that just copies the print file to a temporary location for further investigation when you need +to debug printing. If you craft your own print commands (or even develop print command shell scripts), +make sure you pay attention to the need to remove the files from the Samba spool directory. Otherwise, +your hard disk may soon suffer from shortage of free space. +

    Default UNIX System Printing Commands

    +You learned earlier on that Samba, in most cases, uses its built-in settings for many parameters +if it cannot find an explicitly stated one in its configuration file. The same is true for the +print command. The default print command varies depending +on the printing parameter setting. In the commands listed +below, you will notice some parameters of the form %X where X is +p, s, J, and so on. These letters stand for printer name, spoolfile and job ID, respectively. +They are explained in more detail further below. presents an overview of key +printing options but excludes the special case of CUPS that is discussed in . +

    Table 18.1. Default Printing Settings

    SettingDefault Printing Commands
    printing = bsd|aix|lprng|plpprint command is lpr -r -P%p %s
    printing = sysv|hpuxprint command is lp -c -P%p %s; rm %s
    printing = qnxprint command is lp -r -P%p -s %s
    printing = bsd|aix|lprng|plplpq command is lpq -P%p
    printing = sysv|hpuxlpq command is lpstat -o%p
    printing = qnxlpq command is lpq -P%p
    printing = bsd|aix|lprng|plplprm command is lprm -P%p %j
    printing = sysv|hpuxlprm command is cancel %p-%j
    printing = qnxlprm command is cancel %p-%j
    printing = bsd|aix|lprng|plplppause command is lp -i %p-%j -H hold
    printing = sysv|hpuxlppause command (...is empty)
    printing = qnxlppause command (...is empty)
    printing = bsd|aix|lprng|plplpresume command is lp -i %p-%j -H resume
    printing = sysv|hpuxlpresume command (...is empty)
    printing = qnxlpresume command (...is empty)

    +We excluded the special case of CUPS here, because it is discussed in the next chapter. For +printing = CUPS, if Samba is compiled against libcups, it uses the CUPS API to submit +jobs. (It is a good idea also to set printcap = cups +in case your cupsd.conf is set to write its autogenerated printcap file to an +unusual place). Otherwise, Samba maps to the System V printing commands with the -oraw option for printing, +i.e., it uses lp -c -d%p -oraw; rm %s. With printing = cups, +and if Samba is compiled against libcups, any manually set print command will be ignored! +

    Custom Print Commands

    +After a print job has finished spooling to a service, the print command + will be used by Samba via a system() call to process the +spool file. Usually the command specified will submit the spool file to the host's printing subsystem. But +there is no requirement at all that this must be the case. The print subsystem may not remove the spool +file on its own. So whatever command you specify, you should ensure that the spool file is deleted after +it has been processed.

    -There is no difficulty with using your own customized print commands -with the traditional printing systems. However, if you don't wish to -"roll your own", you should be well informed about the default -built-in commands that Samba uses for each printing subsystem (see the -table above). In all the commands listed in the last paragraphs you -see parameters of the form %X These are -macros, or shortcuts, used as place holders for -the names of real objects. At the time of running a command with such -a placeholder, Samba will insert the appropriate value -automatically. Print commands can handle all Samba macro -substitutions. In regard to printing, the following ones do have +There is no difficulty with using your own customized print commands with the traditional printing +systems. However, if you do not wish to roll your own, you should be well informed about the default +built-in commands that Samba uses for each printing subsystem (see +Table 17.1). In all the +commands listed in the last paragraphs, you see parameters of the form %X. These are +macros, or shortcuts, used as placeholders for the names of real objects. At the time +of running a command with such a placeholder, Samba will insert the appropriate value automatically. Print +commands can handle all Samba macro substitutions. In regard to printing, the following ones do have special relevance: -

    • %s, %f - the path to the spool -file name

    • %p - the appropriate printer -name

    • %J - the job name as -transmitted by the client.

    • %c - the number of printed -pages of the spooled job (if known).

    • %z - the size of the spooled -print job (in bytes)

    -The print command MUST contain at least one occurrence of -%s or %f. -- The -%p is optional. If no printer name is supplied, -the %p will be silently removed from the print -command. In this case the job is sent to the default printer. +

    • %s, %f the path to the spool file name.

    • %p the appropriate printer name.

    • %J the job name as transmitted by the client.

    • %c the number of printed pages of the spooled job (if known).

    • %z the size of the spooled print job (in bytes).

    +The print command must contain at least one occurrence of %s or +the %f. The %p is optional. If no printer name is supplied, +the %p will be silently removed from the print command. In this case, the job is +sent to the default printer.

    -If specified in the [global] section, the print -command given will be used for any printable service that does not -have its own print command specified. If there is neither a specified -print command for a printable service nor a global print command, -spool files will be created but not processed! And (most importantly): -print files will not be removed, so they will start filling your Samba -hard disk. +If specified in the [global] section, the print command given will be +used for any printable service that does not have its own print command specified. If there is neither a +specified print command for a printable service nor a global print command, spool files will be created +but not processed! Most importantly, print files will not be removed, so they will consume disk space.

    -Note that printing may fail on some UNIXes from the "nobody" -account. If this happens, create an alternative guest account and -supply it with the privilege to print. Set up this guest account in -the [global] section with the guest -account parameter. +Printing may fail on some UNIX systems when using the “nobody” account. If this happens, create an +alternative guest account and give it the privilege to print. Set up this guest account in the +[global] section with the guest account parameter.

    -You can form quite complex print commands. You need to realize that -print commands are just passed to a UNIX shell. The shell is able to -expand the included environment variables as usual. (The syntax to -include a UNIX environment variable $variable -in or in the Samba print command is -%$variable.) To give you a working -print command example, the following will log a -print job to /tmp/print.log, print the file, then -remove it. Note that ';' is the usual separator for commands in shell -scripts: +You can form quite complex print commands. You need to realize that print commands are just +passed to a UNIX shell. The shell is able to expand the included environment variables as +usual. (The syntax to include a UNIX environment variable $variable +in the Samba print command is %$variable.) To give you a working +print command example, the following will log a print job +to /tmp/print.log, print the file, then remove it. The semicolon (“;” +is the usual separator for commands in shell scripts:

    print command = echo Printing %s >> /tmp/print.log; lpr -P %p %s; rm %s

    -You may have to vary your own command considerably from this example -depending on how you normally print files on your system. The default -for the print command parameter varies depending on the setting of -the printing parameter. Another example is: -

    print command = /usr/local/samba/bin/myprintscript %p %s

    Innovations in Samba Printing since 2.2

    -Before version 2.2.0, Samba's print server support for Windows clients -was limited to the level of LanMan printing -calls. This is the same protocol level as Windows 9x PCs offer when -they share printers. Beginning with the 2.2.0 release, Samba started -to support the native Windows NT printing mechanisms. These are -implemented via MS-RPC (RPC = Remote -Procedure Calls ). MS-RPCs use the -SPOOLSS named pipe for all printing. +You may have to vary your own command considerably from this example depending on how you normally print +files on your system. The default for the print command +parameter varies depending on the setting of the printing +parameter. Another example is: +

    print command = /usr/local/samba/bin/myprintscript %p %s

    Printing Developments Since Samba-2.2

    +Prior to Samba-2.2.x, print server support for Windows clients was limited to LanMan +printing calls. This is the same protocol level as Windows 9x/Me PCs offer when they share printers. +Beginning with the 2.2.0 release, Samba started to support the native Windows NT printing mechanisms. These +are implemented via MS-RPC (RPC = Remote Procedure Calls +). MS-RPCs use the SPOOLSS named pipe for all printing.

    The additional functionality provided by the new SPOOLSS support includes: -

    • Support for downloading printer driver files to Windows -95/98/NT/2000 clients upon demand (Point'n'Print); -

    • Uploading of printer drivers via the Windows NT -Add Printer Wizard (APW) or the -Imprints tool set. -

    • Support for the native MS-RPC printing calls such as - StartDocPrinter, EnumJobs(), etc... (See the MSDN documentation for more information on the Win32 printing API);

    • Support for NT Access Control -Lists (ACL) on printer objects;

    • Improved support for printer queue manipulation -through the use of internal databases for spooled job information -(implemented by various *.tdb -files).

    -One other benefit of an update is this: Samba 3 is able to publish -all its printers in Active Directory (or LDAP)! +

    • + Support for downloading printer driver files to Windows 95/98/NT/2000 clients upon + demand (Point'n'Print). +

    • + Uploading of printer drivers via the Windows NT Add Printer Wizard (APW) + or the Imprints tool set. +

    • + Support for the native MS-RPC printing calls such as + StartDocPrinter, EnumJobs(), and so on. (See the + MSDN documentation for more information on the + Win32 printing API). +

    • + Support for NT Access Control Lists (ACL) on printer objects. +

    • + Improved support for printer queue manipulation through the use of internal databases for spooled + job information (implemented by various *.tdb files). +

    +A benefit of updating is that Samba-3 is able to publish its printers to Active Directory (or LDAP). +

    +A fundamental difference exists between MS Windows NT print servers and Samba operation. Windows NT +permits the installation of local printers that are not shared. This is an artifact of the fact that +any Windows NT machine (server or client) may be used by a user as a workstation. Samba will publish all +printers that are made available, either by default or by specific declaration via printer-specific shares.

    -One slight difference is here: it is possible on a Windows NT print -server to have printers listed in the Printers folder which are -not shared. Samba does not make this -distinction. By definition, the only printers of which Samba is aware -are those which are specified as shares in -. The reason is that Windows NT/200x/XP Professional -clients do not normally need to use the standard SMB printer share; -rather they can print directly to any printer on another Windows NT -host using MS-RPC. This of course assumes that the printing client has -the necessary privileges on the remote host serving the printer. The -default permissions assigned by Windows NT to a printer gives the -"Print" permissions to the well-known Everyone -group. (The older clients of type Win9x can only print to "shared" +Windows NT/200x/XP Professional clients do not have to use the standard SMB printer share; they can +print directly to any printer on another Windows NT host using MS-RPC. This, of course, assumes that +the client has the necessary privileges on the remote host that serves the printer resource. The +default permissions assigned by Windows NT to a printer gives the Print permissions to the well-known +Everyone group. (The older clients of type Windows 9x/Me can only print to shared printers). -

    Client Drivers on Samba Server for Point'n'Print

    -There is still confusion about what all this means: Is it or -is it not a requirement for printer drivers to be installed on a Samba -host in order to support printing from Windows clients? The -answer to this is: No, it is not a -requirement. Windows NT/2000 clients can, of -course, also run their APW to install drivers -locally (which then connect to a Samba served -print queue). This is the same method as used by Windows 9x -clients. (However, a bug existed in Samba 2.2.0 -which made Windows NT/2000 clients require that the Samba server -possess a valid driver for the printer. This was fixed in Samba -2.2.1). +

    Point'n'Print Client Drivers on Samba Servers

    +There is much confusion about what all this means. The question is often asked, “Is it or is +it not necessary for printer drivers to be installed on a Samba host in order to support printing from +Windows clients?” The answer to this is no, it is not necessary. +

    +Windows NT/2000 clients can, of course, also run their APW to install drivers locally +(which then connect to a Samba-served print queue). This is the same method used by Windows 9x/Me +clients. (However, a bug existed in Samba 2.2.0 that made Windows NT/2000 clients +require that the Samba server possess a valid driver for the printer. This was fixed in Samba 2.2.1). +

    +But it is a new capability to install the printer drivers into the [print$] +share of the Samba server, and a big convenience, too. Then all clients +(including 95/98/ME) get the driver installed when they first connect to this printer share. The +uploading or depositing of the driver into this +[print$] share and the following binding of this driver to an existing +Samba printer share can be achieved by different means: +

    • + Running the APW on an NT/200x/XP Professional client (this does not work from 95/98/ME clients). +

    • + Using the Imprints toolset. +

    • + Using the smbclient and rpcclient commandline tools. +

    • + Using cupsaddsmb (only works for the CUPS + printing system, not for LPR/LPD, LPRng, and so on). +

    +Samba does not use these uploaded drivers in any way to process spooled files. These drivers are utilized +entirely by the clients who download and install them via the “Point'n'Print” mechanism +supported by Samba. The clients use these drivers to generate print files in the format the printer +(or the UNIX print system) requires. Print files received by Samba are handed over to the UNIX printing +system, which is responsible for all further processing, as needed. +

    The Obsoleted [printer$] Section

    + Versions of Samba prior to 2.2 made it possible to use a share named + [printer$]. This name was taken from the same named service created by + Windows 9x/Me clients when a printer was shared by them. Windows 9x/Me printer servers always + have a [printer$] service that provides read-only access (with + no password required) to support printer driver downloads. However, Samba's initial + implementation allowed for a parameter named printer driver location to + be used on a per share basis. This specified the location of the driver files associated with + that printer. Another parameter named printer driver provided a means of + defining the printer driver name to be sent to the client. +

    + These parameters, including the printer driver file parameter, + are now removed and cannot be used in installations of Samba-3. The share name + [print$] is now used for the location of downloadable printer + drivers. It is taken from the [print$] service created + by Windows NT PCs when a printer is shared by them. Windows NT print servers always have a + [print$] service that provides read-write access (in the context + of its ACLs) to support printer driver downloads and uploads. This does not mean Windows + 9x/Me clients are now thrown aside. They can use Samba's [print$] + share support just fine. +

    Creating the [print$] Share

    +In order to support the uploading and downloading of printer driver files, you must first configure a +file share named [print$]. The public name of this share is hard coded +in the MS Windows clients. It cannot be renamed since Windows clients are programmed to search for a +service of exactly this name if they want to retrieve printer driver files. +

    +You should modify the server's file to add the global parameters and create the +[print$] file share (of course, some of the parameter values, such +as path are arbitrary and should be replaced with appropriate values for your +site). See .

    -But it is a new option to install the printer -drivers into the [print$] share of the Samba -server, and a big convenience too. Then all -clients (including 95/98/ME) get the driver installed when they first -connect to this printer share. The uploading or -depositing of the driver into this -[print$] share, and the following binding of -this driver to an existing Samba printer share can be achieved by -different means: -

    • running the APW on an -NT/200x/XP Professional client (this doesn't work from 95/98/ME -clients);

    • using the Imprints -toolset;

    • using the smbclient and -rpcclient commandline tools;

    • using cupsaddsmb(only works for -the CUPS printing system, not for LPR/LPD, LPRng -etc.).

    -Please take additional note of the following fact: Samba -does not use these uploaded drivers in any way to process spooled -files. Drivers are utilized entirely by the clients, who -download and install them via the "Point'n'Print" mechanism supported -by Samba. The clients use these drivers to generate print files in the -format the printer (or the UNIX print system) requires. Print files -received by Samba are handed over to the UNIX printing system, which -is responsible for all further processing, if needed. -

    The [printer$] Section is removed from Samba 3

    -[print$] vs. [printer$] -.  -Versions of Samba prior to 2.2 made it possible to use a share -named [printer$]. This name was taken from the -same named service created by Windows 9x clients when a printer was -shared by them. Windows 9x printer servers always have a -[printer$] service which provides read-only -access (with no password required) in order to support printer driver -downloads. However, Samba's initial implementation allowed for a -parameter named printer driver location to be -used on a per share basis. This specified the location of the driver -files associated with that printer. Another parameter named -printer driver provided a means of defining the -printer driver name to be sent to the client. These parameters, -including the printer driver file parameter, -are now removed and can not be used in installations of samba-3. -Now the share name [print$] is used for the -location of downloadable printer drivers. It is taken from the -[print$] service created by Windows NT PCs when -a printer is shared by them. Windows NT print servers always have a -[print$] service which provides read-write -access (in the context of its ACLs) in order to support printer driver -down- and uploads. Don't fear -- this does not mean Windows 9x -clients are thrown aside now. They can use Samba's -[print$] share support just fine. -

    Creating the [print$] Share

    -In order to support the up- and downloading of printer driver files, -you must first configure a file share named -[print$]. The "public" name of this share is -hard coded in Samba's internals (because it is hard coded in the MS -Windows clients too). It cannot be renamed since Windows clients are -programmed to search for a service of exactly this name if they want -to retrieve printer driver files. +

    Example 18.3. [print\$] example

    [global]
    # members of the ntadmin group should be able to add drivers and set
    # printer properties. root is implicitly always a 'printer admin'.
    printer admin = @ntadmin
    ...
    [printers]
    ...
    [print$]
    comment = Printer Driver Download Area
    path = /etc/samba/drivers
    browseable = yes
    guest ok = yes
    read only = yes
    write list = @ntadmin, root

    -You should modify the server's file to -add the global parameters and create the -[print$] file share (of course, some of the -parameter values, such as 'path' are arbitrary and should be replaced -with appropriate values for your site): -

    Example 18.3. [print\$] example

    [global]
    # members of the ntadmin group should be able to add drivers and set
    # printer properties. root is implicitly always a 'printer admin'.
    printer admin = @ntadmin
    ...
    [printers]
    ...
    [print$]
    comment = Printer Driver Download Area
    path = /etc/samba/drivers
    browseable = yes
    guest ok = yes
    read only = yes
    write list = @ntadmin, root

    Of course, you also need to ensure that the directory named by the -path parameter exists on the UNIX file system. -

    Parameters in the [print$] Section

    -[print$] is a special section in -. It contains settings relevant to -potential printer driver download and local installation by clients. -

    comment = Printer Driver - Download Area

    the comment appears next to the share name if it is -listed in a share list (usually Windows clients won't see it often but -it will also appear up in a smbclient -L sambaserver - output).

    path = /etc/samba/printers

    this is the path to the location of the Windows -driver file deposit from the UNIX point of -view.

    browseable = no

    this makes the [print$] share -"invisible" in Network Neighbourhood to clients. However, you can -still "mount" it from any client using the net use -g:\\sambaserver\print$ command in a "DOS box" or the -"Connect network drive" menu from Windows -Explorer.

    guest ok = yes

    this gives read only access to this share for all -guest users. Access may be used to download and install printer -drivers on clients. The requirement for guest ok = -yes depends upon how your site is configured. If users -will be guaranteed to have an account on the Samba host, then this is -a non-issue.

    Note

    -The non-issue is this: if all your Windows NT users are guaranteed to -be authenticated by the Samba server (for example if Samba -authenticates via an NT domain server and the NT user has already been -validated by the Domain Controller in order to logon to the Windows NT -session), then guest access is not necessary. Of course, in a -workgroup environment where you just want to be able to print without -worrying about silly accounts and security, then configure the share -for guest access. You'll probably want to add map to guest = Bad User in the -[global] section -as well. Make sure you understand what this parameter does before -using it. -

    read only = yes

    as we don't want everybody to upload driver files (or -even change driver settings) we tagged this share as not -writeable.

    write list = @ntadmin,root

    since the [print$] was made -read only by the previous setting, we need to create a "write list" -also. UNIX groups (denoted with a leading "@" character) and users -listed here are allowed write access (as an exception to the general -public's "read-only" access), which they need to update files on the -share. Normally you will want to only name administrative level user -accounts in this setting. Check the file system permissions to make -sure these accounts can copy files to the share. If this is a non-root -account, then the account should also be mentioned in the global -printer admin parameter. See the - man page for more information on -configuring file shares.

    Subdirectory Structure in [print$]

    -In order for a Windows NT print server to support the downloading of -driver files by multiple client architectures, you must create several -subdirectories within the [print$] service -(i.e. the UNIX directory named by the path -parameter). These correspond to each of the supported client -architectures. Samba follows this model as well. Just like the name of -the [print$] share itself, the subdirectories -*must* be exactly the names listed below (you may leave out the -subdirectories of architectures you don't want to support). +path parameter exists on the UNIX file system. +

    [print$] Section Parameters

    +The [print$] is a special section in smb.conf. It contains settings relevant to +potential printer driver download and is used by windows clients for local print driver installation. +The following parameters are frequently needed in this share section: +

    comment = Printer Driver Download Area

    + The comment appears next to the share name if it is listed in a share list (usually Windows + clients will not see it, but it will also appear up in a smbclient -L sambaserver + output). +

    path = /etc/samba/printers

    + Is the path to the location of the Windows driver file deposit from the UNIX point of view. +

    browseable = no

    + Makes the [print$] share invisible to clients from the + Network Neighborhood. However, you can still mount it from any client + using the net use g:\\sambaserver\print$ command in a DOS-box or the + Connect network drive menu> from Windows Explorer. +

    guest ok = yes

    + Gives read-only access to this share for all guest users. Access may be granted to + download and install printer drivers on clients. The requirement for guest ok + = yes depends on how your site is configured. If users will be guaranteed + to have an account on the Samba host, then this is a non-issue. +

    Note

    + If all your Windows NT users are guaranteed to be authenticated by the Samba server + (for example, if Samba authenticates via an NT domain server and the user has already been + validated by the Domain Controller in order to logon to the Windows NT session), then guest + access is not necessary. Of course, in a workgroup environment where you just want + to print without worrying about silly accounts and security, then configure the share for + guest access. You should consider adding map to guest = Bad + User in the [global] section + as well. Make sure you understand what this parameter does before using it. +

    read only = yes

    + Because we do not want everybody to upload driver files (or even change driver settings), + we tagged this share as not writeable. +

    write list = @ntadmin, root

    + The [print$] was made read-only by the previous + setting so we should create a write list entry also. UNIX + groups (denoted with a leading “@” character). Users listed here are allowed + write-access (as an exception to the general public's read-only access), which they need to + update files on the share. Normally, you will want to only name administrative-level user + account in this setting. Check the file system permissions to make sure these accounts + can copy files to the share. If this is a non-root account, then the account should also + be mentioned in the global printer admin + parameter. See the smb.conf man page for more information on configuring file shares. +

    The [print$] Share Directory

    +In order for a Windows NT print server to support the downloading of driver files by multiple client +architectures, you must create several subdirectories within the [print$] +service (i.e., the UNIX directory named by the path +parameter). These correspond to each of the supported client architectures. Samba follows this model as +well. Just like the name of the [print$] share itself, the subdirectories +must be exactly the names listed below (you may leave out the subdirectories of architectures you do +not need to support).

    Therefore, create a directory tree below the [print$] share for each architecture you wish -to support. +to support like this:

    -[print$]--+--
    -          |--W32X86           # serves drivers to "Windows NT x86"
    -          |--WIN40            # serves drivers to "Windows 95/98"
    -          |--W32ALPHA         # serves drivers to "Windows NT Alpha_AXP"
    -          |--W32MIPS          # serves drivers to "Windows NT R4000"
    -          |--W32PPC           # serves drivers to "Windows NT PowerPC"
    -

    Required permissions

    -In order to add a new driver to your Samba host, one of two conditions -must hold true: -

    • The account used to connect to the Samba host must -have a UID of 0 (i.e. a root account)

    • The account used to connect to the Samba host must be -named in the printer adminlist.

    -Of course, the connected account must still possess access to add -files to the subdirectories beneath -[print$]. Remember that all file shares are set -to 'read only' by default. -

    -Once you have created the required [print$] -service and associated subdirectories, go to a Windows NT 4.0/2k/XP -client workstation. Open Network Neighbourhood or -My Network Places and browse for the Samba host. -Once you have located the server, navigate to its Printers and -Faxes folder. You should see an initial listing of printers -that matches the printer shares defined on your Samba host. -

    Installing Drivers into [print$]

    -You have successfully created the [print$] -share in ? And Samba has re-read its -configuration? Good. But you are not yet ready to take off. The -driver files need to be present in this share, -too! So far it is still an empty share. Unfortunately, it is not enough -to just copy the driver files over. They need to be set -up too. And that is a bit tricky, to say the least. We -will now discuss two alternative ways to install the drivers into -[print$]: -

    • using the Samba commandline utility -rpcclient with its various subcommands (here: -adddriver and setdriver) from -any UNIX workstation;

    • running a GUI (Printer -Properties and Add Printer Wizard) -from any Windows NT/2k/XP client workstation.

    -The latter option is probably the easier one (even if the only -entrance to this realm seems a little bit weird at first). -

    Setting Drivers for existing Printers with a Client GUI

    -The initial listing of printers in the Samba host's -Printers folder accessed from a client's Explorer -will have no real printer driver assigned to them. By default -this driver name is set to a NULL -string. This must be changed now. The local Add Printer -Wizard, run from NT/2000/XP clients, will help us in this -task. +[print$]--+ + |--W32X86 # serves drivers to Windows NT x86 + |--WIN40 # serves drivers to Windows 95/98 + |--W32ALPHA # serves drivers to Windows NT Alpha_AXP + |--W32MIPS # serves drivers to Windows NT R4000 + |--W32PPC # serves drivers to Windows NT PowerPC +

    +

    Required permissions

    + In order to add a new driver to your Samba host, one of two conditions must hold true: +

    • + The account used to connect to the Samba host must have a UID of 0 (i.e., a root account). +

    • + The account used to connect to the Samba host must be named in the printer adminlist. +

    + Of course, the connected account must still have write access to add files to the subdirectories beneath + [print$]. Remember that all file shares are set to “read-only” by default. +

    +Once you have created the required [print$] service and +associated subdirectories, go to a Windows NT 4.0/200x/XP client workstation. Open Network +Neighborhood or My Network Places and browse for the Samba host. Once you +have located the server, navigate to its Printers and Faxes folder. You should see +an initial listing of printers that matches the printer shares defined on your Samba host. +

    Installing Drivers into [print$]

    +Have you successfully created the [print$] share in smb.conf, and have your forced Samba +to re-read its smb.conf file? Good. But you are not yet ready to use the new facility. The client driver +files need to be installed into this share. So far it is still an empty share. Unfortunately, it is +not enough to just copy the driver files over. They need to be +correctly installed so that appropriate +records for each driver will exist in the Samba internal databases so it can provide the correct +drivers as they are requested from MS Windows clients. And that is a bit tricky, to say the least. We +now discuss two alternative ways to install the drivers into [print$]: +

    • + Using the Samba commandline utility rpcclient with its various subcommands (here: + adddriver and setdriver) from any UNIX workstation. +

    • + Running a GUI (Printer Properties and Add Printer Wizard) + from any Windows NT/200x/XP client workstation. +

    +The latter option is probably the easier one (even if the process may seem a little bit weird at first). +

    Add Printer Wizard Driver Installation

    +The initial listing of printers in the Samba host's Printers folder accessed from a +client's Explorer will have no real printer driver assigned to them. By default this driver name is set +to a null string. This must be changed now. The local Add Printer Wizard (APW), run from +NT/2000/XP clients, will help us in this task.

    -However, the job to set a valid driver for the printer is not a -straightforward one: You must attempt to view the printer properties -for the printer to which you want the driver assigned. Open the -Windows Explorer, open Network Neighbourhood, browse to the Samba -host, open Samba's Printers folder, right-click the printer icon and -select Properties.... You are now trying to view printer and driver -properties for a queue which has this default NULL driver -assigned. This will result in an error message (this is normal here): -

    Device settings cannot be displayed. The driver -for the specified printer is not installed, only spooler properties -will be displayed. Do you want to install the driver -now?

    -Important:Don't click Yes! Instead, -click No in the error dialog. -Only now you will be presented with the printer properties window. From here, -the way to assign a driver to a printer is open to us. You have now the choice -either: -

    • select a driver from the pop-up list of installed -drivers. Initially this list will be empty. -Or

    • use the New Driver... button to -install a new printer driver (which will in fact start up the -APW).

    -Once the APW is started, the procedure is exactly the same as the one -you are familiar with in Windows (we assume here that you are -familiar with the printer driver installations procedure on Windows -NT). Make sure your connection is in fact setup as a user with -printer admin privileges (if in doubt, use -smbstatus to check for this). If you wish to -install printer drivers for client operating systems other than -Windows NT x86, you will need to use the -Sharing tab of the printer properties dialog. +Installation of a valid printer driver is not straightforward. You must attempt +to view the printer properties for the printer to which you want the driver assigned. Open the Windows +Explorer, open Network Neighborhood, browse to the Samba host, open Samba's Printers +folder, right-click on the printer icon and select Properties.... You are now trying to +view printer and driver properties for a queue that has this default NULL driver +assigned. This will result in the following error message: +

    + Device settings cannot be displayed. The driver for the specified printer is not installed, + only spooler properties will be displayed. Do you want to install the driver now? +

    +Do not click on Yes! Instead, click on No in the error dialog. +Only now you will be presented with the printer properties window. From here, the way to assign a driver +to a printer is open to us. You now have the choice of: +

    • + Select a driver from the pop-up list of installed drivers. Initially this list will be empty. +

    • + Click on New Driver to install a new printer driver (which will + start up the APW). +

    +Once the APW is started, the procedure is exactly the same as the one you are familiar with in Windows (we +assume here that you are familiar with the printer driver installations procedure on Windows NT). Make sure +your connection is, in fact, setup as a user with printer admin +privileges (if in doubt, use smbstatus to check for this). If you wish to install +printer drivers for client operating systems other than Windows NT x86, +you will need to use the Sharing tab of the printer properties dialog.

    -Assuming you have connected with an administrative (or root) account -(as named by the printer admin parameter), -you will also be able to modify other printer properties such as ACLs -and default device settings using this dialog. For the default device -settings, please consider the advice given further below. -

    Setting Drivers for existing Printers with -rpcclient

    -The second way to install printer drivers into -[print$] and set them up in a valid way can be -done from the UNIX command line. This involves four distinct steps: -

    1. gathering the info about the required driver files -and collecting the files together;

    2. deposit the driver files into the -[print$] share's correct subdirectories -(possibly by using smbclient);

    3. running the rpcclient -commandline utility once with the adddriver -subcommand,

    4. running rpcclient a second -time with the setdriver -subcommand.

    -We will provide detailed hints for each of these steps in the next few -paragraphs. -

    Identifying the Driver Files

    -To find out about the driver files, you have two options: you could -investigate the driver CD which comes with your printer. Study the -*.inf file on the CD, if it is contained. This -may not be the possible, since the *.inf file might be -missing. Unfortunately, many vendors have now started to use their own -installation programs. These installations packages are often some -sort of Windows platform archive format, plus, the files may get -re-named during the installation process. This makes it extremely -difficult to identify the driver files you need. +Assuming you have connected with an administrative (or root) account (as named by the +printer admin parameter), you will also be able to modify +other printer properties such as ACLs and default device settings using this dialog. For the default +device settings, please consider the advice given further in . +

    Installing Print Drivers Using rpcclient

    +The second way to install printer drivers into [print$] and set them +up in a valid way is to do it from the UNIX command line. This involves four distinct steps: +

    1. + Gather info about required driver files and collect the files. +

    2. + Deposit the driver files into the [print$] share's correct subdirectories + (possibly by using smbclient). +

    3. + Run the rpcclient command line utility once with the adddriver + subcommand. +

    4. + Run rpcclient a second time with the setdriver subcommand. +

    +We provide detailed hints for each of these steps in the paragraphs that follow. +

    Identifying Driver Files

    +To find out about the driver files, you have two options. You could check the contents of the driver +CDROM that came with your printer. Study the *.inf files lcoated on the CDROM. This +may not be possible, since the *.inf file might be missing. Unfortunately, vendors have now started +to use their own installation programs. These installations packages are often in some Windows platform +archive format. Additionally, the files may be re-named during the installation process. This makes it +extremely difficult to identify the driver files required.

    -Then you only have the second option: install the driver first on a -Windows client *locally* and investigate which file names and paths it -uses after they are installed. (Note, that you need to repeat this -procedure for every client platform you want to support. We are going -to show it here for the W32X86 platform only, a -name used by Microsoft for all WinNT/2k/XP clients...) +Then you only have the second option. Install the driver locally on a Windows client and +investigate which file names and paths it uses after they are installed. (You need to repeat +this procedure for every client platform you want to support. We show it here for the +W32X86 platform only, a name used by Microsoft for all Windows NT/200x/XP +clients.)

    -A good method to recognize the driver files this is to print the test -page from the driver's Properties Dialog -(General tab). Then look at the list of driver -files named on the printout. You'll need to recognize what Windows -(and Samba) are calling the Driver File , the -Data File, the Config File, -the Help File and (optionally) the -Dependent Driver Files (this may vary slightly -for Windows NT). You need to remember all names (or better take a -note) for the next steps. +A good method to recognize the driver files is to print the test page from the driver's +Properties dialog (General tab). Then look at the list of +driver files named on the printout. You'll need to recognize what Windows (and Samba) are calling the +Driver File, Data File, Config File, +Help File and (optionally) the Dependent Driver Files +(this may vary slightly for Windows NT). You need to take a note of all file names for the next steps.

    -Another method to quickly test the driver filenames and related paths -is provided by the rpcclient utility. Run it with -enumdrivers or with the -getdriver subcommand, each in the -3 level. In the following example, -TURBO_XP is the name of the Windows PC (in this -case it was a Windows XP Professional laptop, BTW). I had installed -the driver locally to TURBO_XP while kde-bitshop is -the name of the Linux host from which I am working. We could run an -interactive rpcclient session; -then we'd get an rpcclient /> prompt and would -type the subcommands at this prompt. This is left as a good exercise -to the reader. For now we use rpcclient with the --c parameter to execute a single subcommand -line and exit again. This is the method you would use if you want to -create scripts to automate the procedure for a large number of -printers and drivers. Note the different quotes used to overcome the -different spaces in between words: +Another method to quickly test the driver filenames and related paths is provided by the +rpcclient utility. Run it with enumdrivers or with the +getdriver subcommand, each at the 3 info level. In the following example, +TURBO_XP is the name of the Windows PC (in this case it was a Windows XP Professional +laptop). I installed the driver locally to TURBO_XP, from a Samba server called KDE-BITSHOP. +We could run an interactive rpcclient session; then we would get an +rpcclient /> prompt and would type the subcommands at this prompt. This is left as +a good exercise to the reader. For now, we use rpcclient with the -c +parameter to execute a single subcommand line and exit again. This is the method you would use if you +want to create scripts to automate the procedure for a large number of printers and drivers. Note the +different quotes used to overcome the different spaces in between words:

     root# rpcclient -U'Danka%xxxx' -c \
    -	'getdriver "Heidelberg Digimaster 9110 (PS)" 3' TURBO_XP
    -cmd = getdriver "Heidelberg Digimaster 9110 (PS)" 3
    +	'getdriver "Heidelberg Digimaster 9110 (PS)" 3' TURBO_XP
    +cmd = getdriver "Heidelberg Digimaster 9110 (PS)" 3
     
     [Windows NT x86]
     Printer Driver Info 3:
    @@ -954,58 +813,47 @@ Printer Driver Info 3:
       
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.DLL]
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.INI]
    -  Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1KMMin.DLL]
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.dat]
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.cat]
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.def]
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.hre]
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.vnd]
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de.hlp]
    -  Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\Hddm91c1_de_reg.HLP]
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\HDNIS01Aux.dll]
       Dependentfiles: [C:\WINNT\System32\spool\DRIVERS\W32X86\2\HDNIS01_de.NTF]
       
       Monitorname: []
       Defaultdatatype: []
     

    -You may notice, that this driver has quite a big number of -Dependentfiles (I know worse cases however). Also, -strangely, the Driver File is here tagged as -Driver Path.... oh, well. Here we don't have yet -support for the so-called WIN40 architecture -installed. This name is used by Microsoft for the Win95/98/ME platforms. -If we want to support these, we need to install the Win95/98/ME driver -files in addition to those for W32X86 -(i.e. the WinNT72000/XP clients) onto a Windows PC. This PC -can also host the Win9x drivers, even if itself runs on Windows NT, -2000 or XP. +You may notice that this driver has quite a large number of Dependent files +(there are worse cases, however). Also, strangely, the +Driver File is tagged here +Driver Path. We do not yet have support for the so-called +WIN40 architecture installed. This name is used by Microsoft for the Windows +9x/Me platforms. If we want to support these, we need to install the Windows 9x/Me driver files in +addition to those for W32X86 (i.e., the Windows NT72000/XP clients) onto a +Windows PC. This PC can also host the Windows 9x/Me drivers, even if it runs on Windows NT, 2000 or XP.

    -Since the [print$] share is usually accessible -through the Network Neighbourhood, you can also use the UNC notation -from Windows Explorer to poke at it. The Win9x driver files will end -up in subdirectory "0" of the "WIN40" directory. The full path to -access them will be -\\WINDOWSHOST\print$\WIN40\0\. -

    Note

    more recent drivers on Windows 2000 and Windows XP are -installed into the "3" subdirectory instead of the "2". The version 2 -of drivers, as used in Windows NT, were running in Kernel Mode. -Windows 2000 changed this. While it still can use the Kernel Mode -drivers (if this is enabled by the Admin), its native mode for printer -drivers is User Mode execution. This requires drivers designed for -this. These type of drivers install into the "3" subdirectory. -

    Collecting the Driver Files from a Windows Host's -[print$] Share

    -Now we need to collect all the driver files we identified. in our -previous step. Where do we get them from? Well, why not retrieve them -from the very PC and the same [print$] share -which we investigated in our last step to identify the files? We can -use smbclient to do this. We will use the paths and -names which were leaked to us by getdriver. The +Since the [print$] share is usually accessible through the Network +Neighborhood, you can also use the UNC notation from Windows Explorer to poke at it. The Windows +9x/Me driver files will end up in subdirectory 0 of the WIN40 +directory. The full path to access them will be \\WINDOWSHOST\print$\WIN40\0\. +

    Note

    +More recent drivers on Windows 2000 and Windows XP are installed into the “3” subdirectory +instead of the “2”. The version 2 of drivers, as used in Windows NT, were running in Kernel +Mode. Windows 2000 changed this. While it still can use the Kernel Mode drivers (if this is enabled by +the Admin), its native mode for printer drivers is User Mode execution. This requires drivers designed +for this. These types of drivers install into the “3” subdirectory. +

    Obtaining Driver Files from Windows Client [print$] Shares

    +Now we need to collect all the driver files we identified in our previous step. Where do we get them +from? Well, why not retrieve them from the very PC and the same [print$] +share that we investigated in our last step to identify the files? We can use smbclient +to do this. We will use the paths and names that were leaked to us by getdriver. The listing is edited to include linebreaks for readability:

    -root# smbclient //TURBO_XP/print\$ -U'Danka%xxxx'	\ 
    -	-c 'cd W32X86/2;mget HD*_de.*             \
    -	hd*ppd Hd*_de.* Hddm*dll HDN*Aux.DLL'
    +root# smbclient //TURBO_XP/print\$ -U'Danka%xxxx' \ 
    +   -c 'cd W32X86/2;mget HD*_de.* hd*ppd Hd*_de.* Hddm*dll HDN*Aux.DLL'
    +
     added interface ip=10.160.51.60 bcast=10.160.51.255 nmask=255.255.252.0
     Got a positive name query response from 10.160.50.8 ( 10.160.50.8 )
     Domain=[DEVELOPMENT] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager]
    @@ -1015,43 +863,38 @@ getting file \W32X86\2\Hddm91c1_de.def of size 428 as Hddm91c1_de.def
     Get file Hddm91c1_de.DLL? y
     getting file \W32X86\2\Hddm91c1_de.DLL of size 876544 as Hddm91c1_de.DLL
     [...]
    -
     

    -After this command is complete, the files are in our current local -directory. You probably have noticed that this time we passed several -commands to the -c parameter, separated by semi-colons. This -effects that all commands are executed in sequence on the remote -Windows server before smbclient exits again. +After this command is complete, the files are in our current local directory. You probably have noticed +that this time we passed several commands to the -c parameter, separated by semi-colons. +This effects that all commands are executed in sequence on the remote Windows server before smbclient +exits again.

    -Don't forget to repeat the procedure for the WIN40 -architecture should you need to support Win95/98/XP clients. Remember, the -files for these architectures are in the WIN40/0/ subdir. Once we are -complete, we can run smbclient ... put to store -the collected files on the Samba server's -[print$] share. -

    Depositing the Driver Files into [print$]

    -So, now we are going to put the driver files into the -[print$] share. Remember, the UNIX path to this -share has been defined previously in your -. You also have created subdirectories -for the different Windows client types you want to support. Supposing -your [print$] share maps to the UNIX path -/etc/samba/drivers/, your driver files should now -go here: -

    • for all Windows NT, 2000 and XP clients into -/etc/samba/drivers/W32X86/ but -*not*(yet) into the "2" subdir!

    • for all Windows 95, 98 and ME clients into -/etc/samba/drivers/WIN40/ -- but *not* -(yet) into the "0" subdir!

    -We again use smbclient to transfer the driver files across the -network. We specify the same files and paths as were leaked to us by -running getdriver against the original -Windows install. However, now we are going to -store the files into a Samba/UNIX print server's -[print$] share... +Remember to repeat the procedure for the WIN40 architecture should +you need to support Windows 9x/Me/XP clients. Remember too, the files for these architectures are in the +WIN40/0/ subdirectory. Once this is complete, we can run smbclient ... +put to store the collected files on the Samba server's [print$] +share. +

    Installing Driver Files into [print$]

    +We are now going to locate the driver files into the [print$] +share. Remember, the UNIX path to this share has been defined +previously in your words missing here. You +also have created subdirectories for the different Windows client types you want to +support. Supposing your [print$] share maps to the UNIX path +/etc/samba/drivers/, your driver files should now go here: +

    • + For all Windows NT, 2000 and XP clients into /etc/samba/drivers/W32X86/ but + not (yet) into the 2 subdirectory. +

    • + For all Windows 95, 98 and ME clients into /etc/samba/drivers/WIN40/ but not + (yet) into the 0 subdirectory. +

    +We again use smbclient to transfer the driver files across the network. We specify the same files +and paths as were leaked to us by running getdriver against the original +Windows install. However, now we are going to store the files into a +Samba/UNIX print server's [print$] share.

    -		root# smbclient //SAMBA-CUPS/print\$ -U'root%xxxx' -c \
    - 'cd W32X86; put HDNIS01_de.DLL; \
    +root# smbclient //SAMBA-CUPS/print\$ -U'root%xxxx' -c \
    +  'cd W32X86; put HDNIS01_de.DLL; \
       put Hddm91c1_de.ppd; put HDNIS01U_de.DLL;        \
       put HDNIS01U_de.HLP; put Hddm91c1_de.DLL;        \
       put Hddm91c1_de.INI; put Hddm91c1KMMin.DLL;      \
    @@ -1060,6 +903,7 @@ store the files into a Samba/UNIX print s
       put Hddm91c1_de.vnd; put Hddm91c1_de.hlp;        \
       put Hddm91c1_de_reg.HLP; put HDNIS01Aux.dll;     \
       put HDNIS01_de.NTF'
    +
     added interface ip=10.160.51.60 bcast=10.160.51.255 nmask=255.255.252.0
     Got a positive name query response from 10.160.51.162 ( 10.160.51.162 )
     Domain=[CUPS-PRINT] OS=[UNIX] Server=[Samba 2.2.7a]
    @@ -1080,30 +924,26 @@ putting file Hddm91c1_de_reg.HLP as \W32X86\Hddm91c1_de_reg.HLP
     putting file HDNIS01Aux.dll as \W32X86\HDNIS01Aux.dll
     putting file HDNIS01_de.NTF as \W32X86\HDNIS01_de.NTF
     

    -Phewww -- that was a lot of typing! Most drivers are a lot smaller -- -many only having 3 generic PostScript driver files plus 1 PPD. Note, -that while we did retrieve the files from the "2" subdirectory of the -"W32X86" directory from the Windows box, we don't -put them (for now) in this same subdirectory of the Samba box! This -re-location will automatically be done by the -adddriver command which we will run shortly (and -don't forget to also put the files for the Win95/98/ME architecture -into the WIN40/ subdirectory should you need -them). -

    Check if the Driver Files are there (with smbclient)

    -For now we verify that our files are there. This can be done with -smbclient too (but of course you can log in via SSH -also and do this through a standard UNIX shell access too): + +Whew that was a lot of typing! Most drivers are a lot smaller many only having three generic +PostScript driver files plus one PPD. While we did retrieve the files from the 2 +subdirectory of the W32X86 directory from the Windows box, we do not put them +(for now) in this same subdirectory of the Samba box. This relocation will automatically be done by the +adddriver command, which we will run shortly (and do not forget to also put the files +for the Windows 9x/Me architecture into the WIN40/ subdirectory should you need them). +

    smbclient to Confirm Driver Installation

    +For now we verify that our files are there. This can be done with smbclient, too +(but, of course, you can log in via SSH also and do this through a standard UNIX shell access):

     root# smbclient //SAMBA-CUPS/print\$ -U 'root%xxxx' \
     	-c 'cd W32X86; pwd; dir; cd 2; pwd; dir'
      added interface ip=10.160.51.60 bcast=10.160.51.255 nmask=255.255.252.0
     Got a positive name query response from 10.160.51.162 ( 10.160.51.162 )
    -Domain=[CUPS-PRINT] OS=[UNIX] Server=[Samba 2.2.7a]
    +Domain=[CUPS-PRINT] OS=[UNIX] Server=[Samba 2.2.8a]
     
     Current directory is \\SAMBA-CUPS\print$\W32X86\
    -.                                   D        0  Sun May  4 03:56:35 2003
    -..                                  D        0  Thu Apr 10 23:47:40 2003
    +.                                  D        0  Sun May  4 03:56:35 2003
    +..                                 D        0  Thu Apr 10 23:47:40 2003
     2                                   D        0  Sun May  4 03:56:18 2003
     HDNIS01Aux.dll                      A    15356  Sun May  4 03:58:59 2003
     Hddm91c1KMMin.DLL                   A    46966  Sun May  4 03:58:59 2003
    @@ -1123,8 +963,8 @@ Hddm91c1_de_reg.HLP                 A   228417  Sun May  4 03:58:59 2003
                   40976 blocks of size 262144. 709 blocks available
     
     Current directory is \\SAMBA-CUPS\print$\W32X86\2\
    -.                                   D        0  Sun May  4 03:56:18 2003
    -..                                  D        0  Sun May  4 03:56:35 2003
    +.                                  D        0  Sun May  4 03:56:18 2003
    +..                                 D        0  Sun May  4 03:56:35 2003
     ADOBEPS5.DLL                        A   434400  Sat May  3 23:18:45 2003
     laserjet4.ppd                       A     9639  Thu Apr 24 01:05:32 2003
     ADOBEPSU.DLL                        A   109568  Sat May  3 23:18:45 2003
    @@ -1132,76 +972,64 @@ ADOBEPSU.HLP                        A    18082  Sat May  3 23:18:45 2003
     PDFcreator2.PPD                     A    15746  Sun Apr 20 22:24:07 2003
                   40976 blocks of size 262144. 709 blocks available
     

    -Notice that there are already driver files present in the -2 subdir (probably from a previous -installation). Once the files for the new driver are there too, you -are still a few steps away from being able to use them on the -clients. The only thing you could do *now* is to retrieve them from a -client just like you retrieve ordinary files from a file share, by -opening print$ in Windows Explorer. But that wouldn't install them per -Point'n'Print. The reason is: Samba doesn't know yet that these files -are something special, namely printer driver -files and it doesn't know yet to which print queue(s) these -driver files belong. -

    Running rpcclient with -adddriver

    -So, next you must tell Samba about the special category of the files -you just uploaded into the [print$] share. This -is done by the adddriver command. It will -prompt Samba to register the driver files into its internal TDB -database files. The following command and its output has been edited, -again, for readability: +Notice that there are already driver files present in the 2 subdirectory (probably +from a previous installation). Once the files for the new driver are there too, you are still a few +steps away from being able to use them on the clients. The only thing you could do now is to retrieve +them from a client just like you retrieve ordinary files from a file share, by opening print$ in Windows +Explorer. But that wouldn't install them per Point'n'Print. The reason +is: Samba does not yet know that +these files are something special, namely printer driver files and it does not know +to which print queue(s) these driver files belong. +

    Running rpcclient with adddriver

    +Next, you must tell Samba about the special category of the files you just uploaded into the +[print$] share. This is done by the adddriver +command. It will prompt Samba to register the driver files into its internal TDB database files. The +following command and its output has been edited, again, for readability:

    -		root# rpcclient -Uroot%xxxx -c 'adddriver "Windows NT x86" \
    -"dm9110:HDNIS01_de.DLL: \
    -Hddm91c1_de.ppd:HDNIS01U_de.DLL:HDNIS01U_de.HLP:   \
    - NULL:RAW:Hddm91c1_de.DLL,Hddm91c1_de.INI,          \
    - Hddm91c1_de.dat,Hddm91c1_de.def,Hddm91c1_de.hre,   \
    - Hddm91c1_de.vnd,Hddm91c1_de.hlp,Hddm91c1KMMin.DLL, \
    - HDNIS01Aux.dll,HDNIS01_de.NTF,                     \
    - Hddm91c1_de_reg.HLP' SAMBA-CUPS
    +root# rpcclient -Uroot%xxxx -c 'adddriver "Windows NT x86" \
    +  "dm9110:HDNIS01_de.DLL: \
    +  Hddm91c1_de.ppd:HDNIS01U_de.DLL:HDNIS01U_de.HLP:   \
    +  NULL:RAW:Hddm91c1_de.DLL,Hddm91c1_de.INI,          \
    +  Hddm91c1_de.dat,Hddm91c1_de.def,Hddm91c1_de.hre,   \
    +  Hddm91c1_de.vnd,Hddm91c1_de.hlp,Hddm91c1KMMin.DLL, \
    +  HDNIS01Aux.dll,HDNIS01_de.NTF,                     \
    +  Hddm91c1_de_reg.HLP' SAMBA-CUPS
     
    -cmd = adddriver "Windows NT x86" \
    -"dm9110:HDNIS01_de.DLL:Hddm91c1_de.ppd:HDNIS01U_de.DLL:    \
    - HDNIS01U_de.HLP:NULL:RAW:Hddm91c1_de.DLL,Hddm91c1_de.INI, \
    - Hddm91c1_de.dat,Hddm91c1_de.def,Hddm91c1_de.hre,          \
    - Hddm91c1_de.vnd,Hddm91c1_de.hlp,Hddm91c1KMMin.DLL,        \
    - HDNIS01Aux.dll,HDNIS01_de.NTF,Hddm91c1_de_reg.HLP"
    +cmd = adddriver "Windows NT x86" \
    +  "dm9110:HDNIS01_de.DLL:Hddm91c1_de.ppd:HDNIS01U_de.DLL:   \
    +  HDNIS01U_de.HLP:NULL:RAW:Hddm91c1_de.DLL,Hddm91c1_de.INI, \
    +  Hddm91c1_de.dat,Hddm91c1_de.def,Hddm91c1_de.hre,          \
    +  Hddm91c1_de.vnd,Hddm91c1_de.hlp,Hddm91c1KMMin.DLL,        \
    +  HDNIS01Aux.dll,HDNIS01_de.NTF,Hddm91c1_de_reg.HLP"
     
     Printer Driver dm9110 successfully installed.
    -
     

    -After this step the driver should be recognized by Samba on the print -server. You need to be very careful when typing the command. Don't -exchange the order of the fields. Some changes would lead to a -NT_STATUS_UNSUCCESSFUL error -message. These become obvious. Other changes might install the driver -files successfully, but render the driver unworkable. So take care! -Hints about the syntax of the adddriver command are in the man -page. The CUPS printing chapter of this HOWTO collection provides a -more detailed description, if you should need it. -

    Check how Driver Files have been moved after -adddriver finished

    -One indication for Samba's recognition of the files as driver files is -the successfully installed message. -Another one is the fact, that our files have been moved by the -adddriver command into the 2 -subdirectory. You can check this again with -smbclient: +After this step, the driver should be recognized by Samba on the print server. You need to be very +careful when typing the command. Don't exchange the order of the fields. Some changes would lead to +an NT_STATUS_UNSUCCESSFUL error message. These become obvious. Other +changes might install the driver files successfully, but render the driver unworkable. So take care! +Hints about the syntax of the adddriver command are in the man page. The CUPS printing chapter +provides a more detailed description, should you need it. +

    Checking adddriver Completion

    +One indication for Samba's recognition of the files as driver files is the successfully +installed message. Another one is the fact that our files have been moved by the +adddriver command into the 2 subdirectory. You can check this +again with smbclient:

    -root# smbclient //SAMBA-CUPS/print\$ -Uroot%xx -c 'cd W32X86;dir;pwd;cd 2;dir;pwd'
    +root# smbclient //SAMBA-CUPS/print\$ -Uroot%xx \
    +	-c 'cd W32X86;dir;pwd;cd 2;dir;pwd'
      added interface ip=10.160.51.162 bcast=10.160.51.255 nmask=255.255.252.0
      Domain=[CUPS-PRINT] OS=[UNIX] Server=[Samba 2.2.7a]
     
       Current directory is \\SAMBA-CUPS\print$\W32X86\
    -  .                                   D        0  Sun May  4 04:32:48 2003
    -  ..                                  D        0  Thu Apr 10 23:47:40 2003
    +  .                                  D        0  Sun May  4 04:32:48 2003
    +  ..                                 D        0  Thu Apr 10 23:47:40 2003
       2                                   D        0  Sun May  4 04:32:48 2003
                     40976 blocks of size 262144. 731 blocks available 
     
       Current directory is \\SAMBA-CUPS\print$\W32X86\2\
    -  .                                   D        0  Sun May  4 04:32:48 2003
    -  ..                                  D        0  Sun May  4 04:32:48 2003
    +  .                                  D        0  Sun May  4 04:32:48 2003
    +  ..                                 D        0  Sun May  4 04:32:48 2003
       DigiMaster.PPD                      A   148336  Thu Apr 24 01:07:00 2003
       ADOBEPS5.DLL                        A   434400  Sat May  3 23:18:45 2003
       laserjet4.ppd                       A     9639  Thu Apr 24 01:05:32 2003
    @@ -1224,62 +1052,54 @@ subdirectory. You can check this again with
       HDNIS01U_de.HLP                     A    19770  Sun May  4 04:32:18 2003
       Hddm91c1_de_reg.HLP                 A   228417  Sun May  4 04:32:18 2003
                     40976 blocks of size 262144. 731 blocks available
    -
     

    -Another verification is that the timestamp of the printing TDB files -is now updated (and possibly their filesize has increased). -

    Check if the Driver is recognized by Samba

    -Now the driver should be registered with Samba. We can easily verify -this, and will do so in a moment. However, this driver is -not yet associated with a particular -printer. We may check the driver status of the -files by at least three methods: -

    • from any Windows client browse Network Neighbourhood, -find the Samba host and open the Samba Printers and -Faxes folder. Select any printer icon, right-click and -select the printer Properties. Click on the -Advanced tab. Here is a field indicating the -driver for that printer. A drop down menu allows you to change that -driver (be careful to not do this unwittingly.). You can use this -list to view all drivers know to Samba. Your new one should be amongst -them. (Each type of client will only see his own architecture's -list. If you don't have every driver installed for each platform, the -list will differ if you look at it from Windows95/98/ME or -WindowsNT/2000/XP.)

    • from a Windows 2000 or XP client (not WinNT) browse -Network Neighbourhood, search for the Samba -server and open the server's Printers folder, -right-click the white background (with no printer highlighted). Select -Server Properties. On the -Drivers tab you will see the new driver listed -now. This view enables you to also inspect the list of files belonging -to that driver (this doesn't work on Windows NT, but only on -Windows 2000 and Windows XP. WinNT doesn't provide the "Drivers" -tab).. An alternative, much quicker method for Windows -2000/XP to start this dialog is by typing into a DOS box (you must of -course adapt the name to your Samba server instead of SAMBA-CUPS): -

      rundll32 printui.dll,PrintUIEntry /s /t2 /n\\SAMBA-CUPS

    • from a UNIX prompt run this command (or a variant -thereof), where SAMBA-CUPS is the name of the Samba -host and "xxxx" represents the actual Samba password assigned to root: -

      rpcclient -U'root%xxxx' -c 'enumdrivers' SAMBA-CUPS

      -You will see a listing of all drivers Samba knows about. Your new one -should be amongst them. But it is only listed under the [Windows NT -x86] heading, not under [Windows 4.0], -since we didn't install that part. Or did *you*? -- You will see a listing of -all drivers Samba knows about. Your new one should be amongst them. In our -example it is named dm9110. Note that the 3rd column -shows the other installed drivers twice, for each supported architecture one -time. Our new driver only shows up for -Windows NT 4.0 or 2000. To -have it present for Windows 95, 98 and ME you'll -have to repeat the whole procedure with the WIN40 architecture and subdirectory. -

    A side note: you are not bound to specific driver names

    -You can name the driver as you like. If you repeat the -adddriver step, with the same files as before, but -with a different driver name, it will work the same: +Another verification is that the timestamp of the printing TDB files is now updated +(and possibly their file size has increased). +

    Check Samba for Driver Recognition

    +Now the driver should be registered with Samba. We can easily verify this, and will do so in a +moment. However, this driver is not yet associated with a particular printer. We may check the driver +status of the files by at least three methods: +

    • + From any Windows client browse Network Neighborhood, find the Samba host and open the Samba + Printers and Faxes folder. Select any printer icon, right-click and select + the printer Properties. Click the Advanced + tab. Here is a field indicating the driver for that printer. A drop-down menu allows you to + change that driver (be careful not to do this unwittingly). You can use this list to view + all drivers known to Samba. Your new one should be among them. (Each type of client will only + see his own architecture's list. If you do not have every driver installed for each platform, + the list will differ if you look at it from Windows95/98/ME or WindowsNT/2000/XP.) +

    • + From a Windows 200x/XP client (not Windows NT) browse Network Neighborhood, + search for the Samba server and open the server's Printers folder, + right-click on the white background (with no printer highlighted). Select Server + Properties. On the Drivers tab you will see the new driver + listed. This view enables you to also inspect the list of files belonging to that driver + (this does not work on Windows NT, but only on Windows 2000 and Windows XP; Windows NT does not + provide the Drivers tab). An + alternative and much quicker method for + Windows 2000/XP to start this dialog is by typing into a DOS box (you must of course adapt the + name to your Samba server instead of SAMBA-CUPS): +

      rundll32 printui.dll,PrintUIEntry /s /t2 /n\\SAMBA-CUPS

    • + From a UNIX prompt, run this command (or a variant thereof) where + SAMBA-CUPS is the name of the Samba host and xxxx represents the + actual Samba password assigned to root: +

      rpcclient -U'root%xxxx' -c 'enumdrivers' SAMBA-CUPS

      + You will see a listing of all drivers Samba knows about. Your new one should be among + them. But it is only listed under the [Windows NT x86] heading, not under + [Windows 4.0], since you didn't install that part. Or did you? + You will see a listing of all drivers Samba knows about. Your new one should be among them. In + our example it is named dm9110. Note that the third column shows the other + installed drivers twice, one time for each supported architecture. Our new driver only shows up + for Windows NT 4.0 or 2000. To have it present for Windows + 95, 98 and ME, you'll have to repeat the whole procedure with the WIN40 architecture + and subdirectory. +

    Specific Driver Name Flexibility

    +You can name the driver as you like. If you repeat the adddriver step with the same +files as before but with a different driver name, it will work the same:

    -root# rpcclient -Uroot%xxxx                                        \
    -  -c 'adddriver "Windows NT x86"                     \
    -  "myphantasydrivername:HDNIS01_de.DLL:              \
    +root# rpcclient -Uroot%xxxx         \
    +  -c 'adddriver "Windows NT x86"                     \
    +  "mydrivername:HDNIS01_de.DLL:              \
       Hddm91c1_de.ppd:HDNIS01U_de.DLL:HDNIS01U_de.HLP:   \
       NULL:RAW:Hddm91c1_de.DLL,Hddm91c1_de.INI,          \
       Hddm91c1_de.dat,Hddm91c1_de.def,Hddm91c1_de.hre,   \
    @@ -1287,345 +1107,292 @@ with a different driver name, it will work the same:
       HDNIS01Aux.dll,HDNIS01_de.NTF,Hddm91c1_de_reg.HLP' SAMBA-CUPS
       
     
    - cmd = adddriver "Windows NT x86" 
    -                 "myphantasydrivername:HDNIS01_de.DLL:Hddm91c1_de.ppd:HDNIS01U_de.DLL:\
    -                  HDNIS01U_de.HLP:NULL:RAW:Hddm91c1_de.DLL,Hddm91c1_de.INI,           \
    -                  Hddm91c1_de.dat,Hddm91c1_de.def,Hddm91c1_de.hre,                    \
    -                  Hddm91c1_de.vnd,Hddm91c1_de.hlp,Hddm91c1KMMin.DLL,                  \
    -                  HDNIS01Aux.dll,HDNIS01_de.NTF,Hddm91c1_de_reg.HLP"
    -
    - Printer Driver myphantasydrivername successfully installed.
    +cmd = adddriver "Windows NT x86" \
    + "mydrivername:HDNIS01_de.DLL:Hddm91c1_de.ppd:HDNIS01U_de.DLL:\
    +  HDNIS01U_de.HLP:NULL:RAW:Hddm91c1_de.DLL,Hddm91c1_de.INI,           \
    +  Hddm91c1_de.dat,Hddm91c1_de.def,Hddm91c1_de.hre,                    \
    +  Hddm91c1_de.vnd,Hddm91c1_de.hlp,Hddm91c1KMMin.DLL,                  \
    +  HDNIS01Aux.dll,HDNIS01_de.NTF,Hddm91c1_de_reg.HLP"
     
    +Printer Driver mydrivername successfully installed.
     

    -You will also be able to bind that driver to any print queue (however, -you are responsible yourself that you associate drivers to queues -which make sense to the target printer). Note, that you can't run the -rpcclient adddriver command -repeatedly. Each run "consumes" the files you had put into the -[print$] share by moving them into the -respective subdirectories. So you must precede an -smbclient ... put command before each -rpcclient ... adddriver" command. -

    Running rpcclient with -setdriver

    -Samba still needs to know which printer's driver -this is. It needs to create a mapping of the driver to a printer, and -store this info in its "memory", the TDB files. The rpcclient -setdriver command achieves exactly this: +You will be able to bind that driver to any print queue (however, you are responsible that +you associate drivers to queues that make sense with respect to target printers). You cannot run the +rpcclient adddriver command repeatedly. Each run consumes the +files you had put into the [print$] share by moving them into the +respective subdirectories. So you must execute an smbclient ... put command before +each rpcclient ... adddriver command. +

    Running rpcclient with the setdriver

    +Samba needs to know which printer owns which driver. Create a mapping of the driver to a printer, and +store this info in Samba's memory, the TDB files. The rpcclient setdriver command +achieves exactly this:

    -root# rpcclient -U'root%xxxx' -c 'setdriver dm9110 myphantasydrivername' SAMBA-CUPS
    - cmd = setdriver dm9110 myphantasydrivername
    - Successfully set dm9110 to driver myphantasydrivername.
    +root# rpcclient -U'root%xxxx' -c 'setdriver dm9110 mydrivername' SAMBA-CUPS
    + cmd = setdriver dm9110 mydrivername
    +
    +Successfully set dm9110 to driver mydrivername.
     

    -Ahhhhh -- no, I didn't want to do that. Repeat, this time with the -name I intended: +Ah, no, I did not want to do that. Repeat, this time with the name I intended:

     root# rpcclient -U'root%xxxx' -c 'setdriver dm9110 dm9110' SAMBA-CUPS
      cmd = setdriver dm9110 dm9110
    - Successfully set dm9110 to driver dm9110.
    +Successfully set dm9110 to driver dm9110.
    +

    +The syntax of the command is: +

    +rpcclient -U'root%sambapassword' -c 'setdriver printername \
    + drivername' SAMBA-Hostname. 
     

    -The syntax of the command is rpcclient --U'root%sambapassword' -c 'setdriver -"printername" -"drivername' -SAMBA-Hostname . -- -Now we have done *most* of the work. But not yet all.... +Now we have done most of the work, but not all of it.

    Note

    -the setdriver command will only succeed if the printer is -known to -Samba already. A bug in 2.2.x prevented Samba from recognizing freshly -installed printers. You had to restart Samba, or at least send a HUP -signal to all running smbd processes to work around this: -kill -HUP `pidof smbd`.

    Client Driver Install Procedure

    -A famous philosopher said once: “The Proof of the Pudding lies -in the Eating”. The proof for our setup lies in the printing. -So let's install the printer driver onto the client PCs. This is not -as straightforward as it may seem. Read on. -

    The first Client Driver Installation

    -Especially important is the installation onto the first client PC (for -each architectural platform separately). Once this is done correctly, -all further clients are easy to setup and shouldn't need further -attention. What follows is a description for the recommended first -procedure. You work now from a client workstation. First you should -guarantee that your connection is not unwittingly mapped to -bad user "nobody". In a DOS box type: +The setdriver command will only succeed if the +printer is already known to Samba. A +bug in 2.2.x prevented Samba from recognizing freshly installed printers. You had to restart Samba, +or at least send an HUP signal to all running smbd processes to work around this: kill -HUP +`pidof smbd`. +

    Client Driver Installation Procedure

    +As Don Quixote said: “The proof of the pudding is in the eating.” The proof +for our setup lies in the printing. So let's install the printer driver onto the client PCs. This is +not as straightforward as it may seem. Read on. +

    First Client Driver Installation

    +Especially important is the installation onto the first client PC (for each architectural platform +separately). Once this is done correctly, all further clients are easy to setup and shouldn't need further +attention. What follows is a description for the recommended first procedure. You work now from a client +workstation. You should guarantee that your connection is not unwittingly mapped to bad +user nobody. In a DOS box type:

    net use \\SAMBA-SERVER\print$ /user:root

    -Replace root, if needed, by another valid -printer admin user as given in the definition. -Should you already be connected as a different user, you'll get an error -message. There is no easy way to get rid of that connection, because -Windows doesn't seem to know a concept of "logging off" from a share -connection (don't confuse this with logging off from the local -workstation; that is a different matter). You can try to close -all Windows file explorer and Internet Explorer -windows. As a last resort, you may have to reboot. Make sure there is -no automatic re-connection set up. It may be easier to go to a -different workstation and try from there. After you have made sure you -are connected as a printer admin user (you can check this with the -smbstatus command on Samba) do this from the -Windows workstation: -

    • Open Network -Neighbourhood

    • Browse to Samba server

    • Open its Printers and -Faxes folder

    • Highlight and right-click the printer

    • Select Connect... (for WinNT4/2K -it is possibly Install...)

    -A new printer (named printername on -samba-server) should now have appeared in your -local Printer folder (check Start -- -Settings -- Control Panel --- Printers and Faxes). +Replace root, if needed, by another valid printer admin user as given in +the definition. Should you already be connected as a different user, you will get an error message. There +is no easy way to get rid of that connection, because Windows does not seem to know a concept of logging +off from a share connection (do not confuse this with logging off from the local workstation; that is +a different matter). You can try to close all Windows file explorer +and Internet Explorer for Windows. As +a last resort, you may have to reboot. Make sure there is no automatic reconnection set up. It may be +easier to go to a different workstation and try from there. After you have made sure you are connected +as a printer admin user (you can check this with the smbstatus command on Samba), +do this from the Windows workstation: +

    1. + Open Network Neighborhood. +

    2. + Browse to Samba server. +

    3. + Open its Printers and Faxes folder. +

    4. + Highlight and right-click on the printer. +

    5. + Select Connect (for Windows NT4/200x + it is possibly Install). +

    +A new printer (named printername on Samba-server) should now have +appeared in your local Printer folder (check Start -- +Settings -- Control Panel -- Printers +and Faxes).

    -Most likely you are now tempted to try and print a test page. After -all, you now can open the printer properties and on the "General" tab, -there is a button offering to do just that. But chances are that you -get an error message saying Unable to print Test -Page. The reason might be that there is not yet a -valid Device Mode set for the driver, or that the "Printer Driver -Data" set is still incomplete. +Most likely you are now tempted to try to print a test page. After all, you now can open the printer +properties, and on the General tab there is a button offering to do just that. But +chances are that you get an error message saying Unable to print Test Page. The +reason might be that there is not yet a valid Device Mode set for the driver, or that the “Printer +Driver Data” set is still incomplete.

    -You must now make sure that a valid "Device Mode" is set for the -driver. Don't fear -- we will explain now what that means. -

    IMPORTANT! Setting Device Modes on new Printers

    -In order for a printer to be truly usable by a Windows NT/2K/XP -client, it must possess: -

    • a valid Device Mode generated by -the driver for the printer (defining things like paper size, -orientation and duplex settings), and

    • a complete set of -Printer Driver Data generated by the -driver.

    -If either one of these is incomplete, the clients can produce less -than optimal output at best. In the worst cases, unreadable garbage or -nothing at all comes from the printer or they produce a harvest of -error messages when attempting to print. Samba stores the named values -and all printing related info in its internal TDB database files -(ntprinters.tdb, -ntdrivers.tdb, printing.tdb -and ntforms.tdb). +You must make sure that a valid Device Mode is set for the +driver. We now explain what that means. +

    Setting Device Modes on New Printers

    +For a printer to be truly usable by a Windows NT/200x/XP client, it must possess: +

    • + A valid Device Mode generated by the driver for the printer (defining things + like paper size, orientation and duplex settings). +

    • + A complete set of Printer Driver Data generated by the driver. +

    +If either of these is incomplete, the clients can produce less than optimal output at best. In the +worst cases, unreadable garbage or nothing at all comes from the printer or it produces a harvest of +error messages when attempting to print. Samba stores the named values and all printing related information in +its internal TDB database files (ntprinters.tdb, ntdrivers.tdb, +printing.tdb and ntforms.tdb).

    -What do these two words stand for? Basically, the Device Mode and the -set of Printer Driver Data is a collection of settings for all print -queue properties, initialized in a sensible way. Device Modes and -Printer Driver Data should initially be set on the print server (that is -here: the Samba host) to healthy values so that the clients can start -to use them immediately. How do we set these initial healthy values? -This can be achieved by accessing the drivers remotely from an NT (or -2k/XP) client, as is discussed in the next paragraphs. +What do these two words stand for? Basically, the Device Mode and the set of Printer Driver Data is a +collection of settings for all print queue properties, initialized in a sensible way. Device Modes and +Printer Driver Data should initially be set on the print server (the Samba host) to healthy +values so the clients can start to use them immediately. How do we set these initial healthy values? +This can be achieved by accessing the drivers remotely from an NT (or 200x/XP) client, as is discussed +in the following paragraphs.

    -Be aware, that a valid Device Mode can only be initiated by a -printer admin, or root (the reason should be -obvious). Device Modes can only correctly be set by executing the -printer driver program itself. Since Samba can not execute this Win32 -platform driver code, it sets this field initially to NULL (which is -not a valid setting for clients to use). Fortunately, most drivers -generate themselves the Printer Driver Data that is needed, when they -are uploaded to the [print$] share with the -help of the APW or rpcclient. +Be aware that a valid Device Mode can only be initiated by a +printer admin, or root +(the reason should be obvious). Device Modes can only be correctly +set by executing the printer driver program itself. Since Samba cannot execute this Win32 platform driver +code, it sets this field initially to NULL (which is not a valid setting for clients to use). Fortunately, +most drivers automatically generate the Printer Driver Data that is needed when they are uploaded to the +[print$] share with the help of the APW or rpcclient.

    -The generation and setting of a first valid Device Mode however -requires some "tickling" from a client, to set it on the Samba -server. The easiest means of doing so is to simply change the page -orientation on the server's printer. This "executes" enough of the -printer driver program on the client for the desired effect to happen, -and feeds back the new Device Mode to our Samba server. You can use the -native Windows NT/2K/XP printer properties page from a Window client -for this: -

    • Browse the Network Neighbourhood

    • Find the Samba server

    • Open the Samba server's Printers and - Faxes folder

    • Highlight the shared printer in question

    • Right-click the printer (you may already be here, if you -followed the last section's description)

    • At the bottom of the context menu select -Properties.... (if the menu still offers the -Connect... entry -further above, you need to click that one first to achieve the driver -installation as shown in the last section)

    • Go to the Advanced tab; click on -Printing Defaults...

    • Change the "Portrait" page setting to "Landscape" (and -back)

    • (Oh, and make sure to apply -changes between swapping the page orientation to cause the change to -actually take effect...).

    • While you're at it, you may optionally also want to -set the desired printing defaults here, which then apply to all future -client driver installations on the remaining from now -on.

    -This procedure has executed the printer driver program on the client -platform and fed back the correct Device Mode to Samba, which now -stored it in its TDB files. Once the driver is installed on the -client, you can follow the analogous steps by accessing the -local Printers folder too if you are -a Samba printer admin user. From now on printing should work as expected. +The generation and setting of a first valid Device Mode, however, requires some tickling from a client, +to set it on the Samba server. The easiest means of doing so is to simply change the page orientation on +the server's printer. This executes enough of the printer driver program on the client for the desired +effect to happen, and feeds back the new Device Mode to our Samba server. You can use the native Windows +NT/200x/XP printer properties page from a Window client for this: +

    1. + Browse the Network Neighborhood. +

    2. + Find the Samba server. +

    3. + Open the Samba server's Printers and Faxes folder. +

    4. + Highlight the shared printer in question. +

    5. + Right-click on the printer (you may already be here, if you followed the last section's description). +

    6. + At the bottom of the context menu select Properties (if the menu still offers the + Connect entry further above, you + need to click on that one first to achieve the driver + installation as shown in the last section). +

    7. + Go to the Advanced tab; click on Printing Defaults. +

    8. + Change the Portrait page setting to Landscape (and back). +

    9. + Make sure to apply changes between swapping the page orientation to cause the change to actually take effect. +

    10. + While you are at it, you may also want to set the desired printing defaults here, which then apply to all future + client driver installations on the remaining from now on. +

    +This procedure has executed the printer driver program on the client platform and fed back the correct +Device Mode to Samba, which now stored it in its TDB files. Once the driver is installed on the client, +you can follow the analogous steps by accessing the local Printers +folder, too, if you are a Samba printer admin user. From now on, printing should work as expected.

    -Samba also includes a service level parameter name default -devmode for generating a default Device Mode for a -printer. Some drivers will function well with Samba's default set of -properties. Others may crash the client's spooler service. So use this -parameter with caution. It is always better to have the client -generate a valid device mode for the printer and store it on the -server for you. -

    Further Client Driver Install Procedures

    -Every further driver may be done by any user, along the lines -described above: Browse network, open printers folder on Samba server, -right-click printer and choose Connect.... Once -this completes (should be not more than a few seconds, but could also take -a minute, depending on network conditions), you should find the new printer in -your client workstation local Printers and -Faxes folder. +Samba includes a service level parameter name default devmode for generating a default +Device Mode for a printer. Some drivers will function well with Samba's default set of properties. Others +may crash the client's spooler service. So use this parameter with caution. It is always better to have +the client generate a valid device mode for the printer and store it on the server for you. +

    Additional Client Driver Installation

    +Every additional driver may be installed, along the lines described +above. Browse network, open the +Printers folder on Samba server, right-click on Printer and choose +Connect.... Once this completes (should be not more than a few seconds, +but could also take a minute, depending on network conditions), you should find the new printer in your +client workstation local Printers and Faxes folder.

    You can also open your local Printers and Faxes folder by -using this command on Windows 2000 and Windows XP Professional workstations: -

    rundll32 shell32.dll,SHHelpShortcuts_RunDLL PrintersFolder -

    +using this command on Windows 200x/XP Professional workstations: +

    rundll32 shell32.dll,SHHelpShortcuts_RunDLL PrintersFolder

    or this command on Windows NT 4.0 workstations:

    rundll32 shell32.dll,Control_RunDLL MAIN.CPL @2

    -You can enter the commands either inside a DOS box window -or in the Run command... field from the -Start menu. -

    Always make first Client Connection as root or "printer admin"

    -After you installed the driver on the Samba server (in its -[print$] share, you should always make sure -that your first client installation completes correctly. Make it a habit for -yourself to build that the very first connection from a client as -printer admin. This is to make sure that: -

    • a first valid Device Mode is -really initialized (see above for more explanation details), and -that

    • the default print settings of your printer for all -further client installations are as you want them

    -Do this by changing the orientation to landscape, click -Apply, and then change it back again. Then modify -the other settings (for example, you don't want the default media size -set to Letter, when you are all using -A4, right? You may want to set the printer for -duplex as the default; etc.). +You can enter the commands either inside a DOS box window or in the Run +command... field from the Start menu. +

    Always Make First Client Connection as root or “printer admin

    +After you installed the driver on the Samba server (in its [print$] +share, you should always make sure that your first client installation completes correctly. Make it a +habit for yourself to build the very first connection from a client as printer admin. This is to make sure that: +

    • + A first valid Device Mode is really initialized (see above for more + explanation details). +

    • + The default print settings of your printer for all further client installations are as you want them. +

    +Do this by changing the orientation to landscape, click on Apply, and then change it +back again. Next, modify the other settings (for example, you do not want the default media size set to +Letter when you are all using A4, right? You may want to set the +printer for duplex as the default, and so on).

    -To connect as root to a Samba printer, try this command from a Windows -2K/XP DOS box command prompt: +To connect as root to a Samba printer, try this command from a Windows 200x/XP DOS box command prompt:

    -C:\> runas /netonly /user:root "rundll32 printui.dll,PrintUIEntry /p /t3 /n 
    -	\\SAMBA-SERVER\printername"
    +C:\> runas /netonly /user:root "rundll32 printui.dll,PrintUIEntry /p /t3 /n 
    +	\\SAMBA-SERVER\printername"
     

    You will be prompted for root's Samba-password; type it, wait a few -seconds, click on Printing Defaults... and -proceed to set the job options as should be used as defaults by all -clients. Alternatively, instead of root you can name one other member -of the printer admin from the setting. +seconds, click on Printing +Defaults, and proceed to set the job options that should be used as defaults by all +clients. Alternately, instead of root you can name one other member of the printer admin from the setting.

    -Now all the other users downloading and installing the driver -the same way (called Point'n'Print) will -have the same defaults set for them. If you miss this step you'll -get a lot of helpdesk calls from your users. But maybe you like to -talk to people.... ;-) -

    Other Gotchas

    -Your driver is installed. It is ready for -Point'n'Print installation by the clients -now. You may have tried to download and use it -onto your first client machine now. But wait... let's make you -acquainted first with a few tips and tricks you may find useful. For -example, suppose you didn't manage to "set the defaults" on the -printer, as advised in the preceding paragraphs? And your users -complain about various issues (such as “We need to set the paper -size for each job from Letter to A4 and it won't store it!”) -

    Setting Default Print Options for the Client Drivers

    + Now all the other users downloading and installing the driver the same way (called +“Point'n'Print”) will have the same defaults set for them. If you miss this step +you'll get a lot of Help Desk calls from your users, but maybe you like to talk to people. +

    Other Gotchas

    +Your driver is installed. It is now ready for Point'n'Print +installation by the clients. You may have tried to download and use it +onto your first client machine, but +wait. Let's make sure you are acquainted first with a few tips and tricks you may find useful. For example, +suppose you did not set the defaults on the printer, as advised in the preceding +paragraphs. Your users complain about various issues (such as, “We need to set the paper size +for each job from Letter to A4 and it will not store it.”) +

    Setting Default Print Options for Client Drivers

    The last sentence might be viewed with mixed feelings by some users and -admins. They have struggled for hours and hours and couldn't arrive at -a point were their settings seemed to be saved. It is not their -fault. The confusing thing is this: in the multi-tabbed dialog that pops -up when you right-click the printer name and select -Properties..., you can arrive at two identically -looking dialogs, each claiming that they help you to set printer options, -in three different ways. Here is the definite answer to the "Samba -Default Driver Setting FAQ": -

    I can't set and save default print options -for all users on Win2K/XP! Why not?”  -How are you doing it? I bet the wrong way.... (it is not very -easy to find out, though). There are 3 different ways to bring you to -a dialog that seems to set everything. All three -dialogs look the same. Only one of them -does what you intend. -Important: you need to be Administrator or Print -Administrator to do this for all users. Here is how I reproduce it in -on XP Professional: - -

    1. The first "wrong" way: - -

      1. Open the Printers -folder.

      2. Right-click on the printer -(remoteprinter on cupshost) and -select in context menu Printing -Preferences...

      3. Look at this dialog closely and remember what it looks -like.

      -

    2. The second "wrong" way: +admins. They have struggled for hours and could not arrive at a point +where their settings seemed to be saved. It is not their fault. The confusing +thing is that in the multi-tabbed dialog that pops up when you right-click +on the printer name and select Properties, you +can arrive at two dialogs that appear identical, each claiming that they help +you to set printer options in three different ways. Here is the definite +answer to the Samba default driver setting FAQ: +

      I can not set and save default print options +for all users on Windows 200x/XP. Why not?”  +How are you doing it? I bet the wrong way. (It is not easy to find out, though). There are three different +ways to bring you to a dialog that seems to set everything. All three +dialogs look the same, but only one +of them does what you intend. You need to be Administrator or Print Administrator to do this for all +users. Here is how I reproduce it in an XP Professional: -

      1. Open the Printers -folder.

      2. Right-click on the printer (remoteprinter on -cupshost) and select in the context menu -Properties

      3. Click on the General -tab

      4. Click on the button Printing -Preferences...

      5. A new dialog opens. Keep this dialog open and go back -to the parent dialog.

      -

    3. The third, the "correct" way: (should you do -this from the beginning, just carry out steps 1. and 2. from second -"way" above) - -

      1. Click on the Advanced -tab. (Hmmm... if everything is "Grayed Out", then you are not logged -in as a user with enough privileges).

      2. Click on the Printing -Defaults... button.

      3. On any of the two new tabs, click on the -Advanced... button.

      4. A new dialog opens. Compare this one to the other, -identical looking one from "B.5" or A.3".

      -

    - -Do you see any difference in the two settings dialogs? I don't -either. However, only the last one, which you arrived at with steps -C.1.-6. will permanently save any settings which will then become the -defaults for new users. If you want all clients to have the same -defaults, you need to conduct these steps as administrator -(printer admin in ) -before a client downloads the driver (the clients -can later set their own per-user defaults by -following the procedures A. -or B. above...). (This is new: Windows 2000 and -Windows XP allow per-user default settings and -the ones the administrator gives them, before they set up their own). -The "parents" of the identically looking dialogs have a slight -difference in their window names: one is called -Default Print Values for Printer Foo on Server -Bar" (which is the one you need) and the other is -called "Print Settings for Printer Foo on Server -Bar". The last one is the one you arrive at when you -right-click on the printer and select Print -Settings.... This is the one what you were -taught to use back in the days of Windows NT! So it is only natural to -try the same way with Win2k or WinXP. You wouldn't dream -that there is now a different "clicking path" to arrive at an -identically looking, but functionally different dialog to set defaults -for all users! -

    Tip

    Try (on Win2000 and WinXP) to run this command (as a user -with the right privileges): +The following list needs periods after the letters and numbers::::::::: +

    1. The first “wrong” way: +

      1. Open the Printers folder.

      2. Right-click on the printer (remoteprinter on cupshost) and + select in context menu Printing Preferences...

      3. Look at this dialog closely and remember what it looks like.

    2. The second “wrong” way: +

      1. Open the Printers folder.

      2. Right-click on the printer (remoteprinter on + cupshost) and select in the context menu + Properties

      3. Click on the General + tab

      4. Click on the Printing + Preferences...

      5. A new dialog opens. Keep this dialog open and go back + to the parent dialog.

      +

    3. + The third and correct way: (should you do this from the beginning, just carry out steps 1 + and 2 from the second method above). +

      1. Click on the Advanced + tab. (If everything is “grayed out,” then you are not logged + in as a user with enough privileges).

      2. Click on the Printing + Defaults button.

      3. On any of the two new tabs, + click on the + Advanced button.

      4. A new dialog opens. Compare + this one to the other. Are they + identical looking comparing one from + “B.5” and one from A.3".

    +Do you see any difference in the two settings dialogs? I do not either. However, only the last one, which +you arrived at with steps C.1 through 6 will permanently save any settings which will then become the defaults +for new users. If you want all clients to have the same defaults, you need to conduct these steps as +administrator (printer admin in ) before +a client downloads the driver (the clients can later set their own per-user defaults +by following procedures A or B above). Windows 200x/XP allow per-user default settings and the ones the +administrator gives them, before they set up their own. The parents of the identically-looking dialogs have a slight difference in their window names; one is called Default Print +Values for Printer Foo on Server Bar" (which is the one you need) and the other is called +“Print Settings for Printer Foo on Server Bar”. The last one is the one you +arrive at when you right-click on the printer and select Print Settings.... This +is the one that you were taught to use back in the days of Windows NT, so it is only natural to try the +same way with Windows 200x/XP. You would not dream that there is now a different path to arrive at an +identically looking, but functionally different, dialog to set defaults for all users. +

    Tip

    Try (on Windows 200x/XP) to run this command (as a user with the right privileges):

    rundll32 printui.dll,PrintUIEntry /p /t3 /n\\SAMBA-SERVER\printersharename

    -to see the tab with the Printing Defaults... -button (the one you need). Also run this command: +To see the tab with the Printing Defaults button (the one you need),also run this command:

    rundll32 printui.dll,PrintUIEntry /p /t0 /n\\SAMBA-SERVER\printersharename

    -to see the tab with the Printing Preferences... -button (the one which doesn't set system-wide defaults). You can -start the commands from inside a DOS box" or from the Start --- Run... menu. -

    Supporting large Numbers of Printers

    -One issue that has arisen during the recent development phase of Samba -is the need to support driver downloads for 100's of printers. Using -Windows NT APW here is somewhat awkward (to say the least). If you -don't want to acquire RSS pains from such the printer installation -clicking orgy alone, you need to think about a non-interactive script. +To see the tab with the Printing Preferences +button (the one which does not set system-wide defaults), you can +start the commands from inside a DOS box" or from Start -> Run. +

    Supporting Large Numbers of Printers

    +One issue that has arisen during the recent development phase of Samba is the need to support driver +downloads for hunderds of printers. Using Windows NT APW here is somewhat awkward (to say the least). If +you do not want to acquire RSS pains from the printer installation clicking orgy alone, you need +to think about a non-interactive script.

    -If more than one printer is using the same driver, the -rpcclient setdriver command can be used to set the -driver associated with an installed queue. If the driver is uploaded -to [print$] once and registered with the -printing TDBs, it can be used by multiple print queues. In this case -you just need to repeat the setprinter subcommand -of rpcclient for every queue (without the need to -conduct the adddriver again and again). The -following is an example of how this could be accomplished: +If more than one printer is using the same driver, the rpcclient setdriver +command can be used to set the driver associated with an installed queue. If the driver is uploaded to +[print$] once and registered with the printing TDBs, it can be used by +multiple print queues. In this case, you just need to repeat the setprinter subcommand of +rpcclient for every queue (without the need to conduct the adddriver +repeatedly). The following is an example of how this could be accomplished:

     root# rpcclient SAMBA-CUPS -U root%secret -c 'enumdrivers'
      cmd = enumdrivers
    @@ -1644,7 +1411,7 @@ following is an example of how this could be accomplished:
        Driver Name: [dm9110]
     
      Printer Driver Info 1:
    -   Driver Name: [myphantasydrivername]
    +   Driver Name: [mydrivername]
     
      [....]
     

    @@ -1661,7 +1428,7 @@ following is an example of how this could be accomplished:

     root# rpcclient SAMBA-CUPS -U root%secret -c \
    -  'setdriver dm9110 "Heidelberg Digimaster 9110 (PS)"'
    +  'setdriver dm9110 "Heidelberg Digimaster 9110 (PS)"'
      cmd = setdriver dm9110 Heidelberg Digimaster 9110 (PPD)
      Successfully set dm9110 to driver Heidelberg Digimaster 9110 (PS).
     

    @@ -1678,9 +1445,9 @@ following is an example of how this could be accomplished:

    -root# rpcclient SAMBA-CUPS -U root%secret -c 'setdriver dm9110 myphantasydrivername'
    - cmd = setdriver dm9110 myphantasydrivername
    - Successfully set dm9110 to myphantasydrivername.
    +root# rpcclient SAMBA-CUPS -U root%secret -c 'setdriver dm9110 mydrivername'
    + cmd = setdriver dm9110 mydrivername
    + Successfully set dm9110 to mydrivername.
     

    @@ -1688,119 +1455,94 @@ following is an example of how this could be accomplished:
      cmd = enumprinters
        flags:[0x800000]
        name:[\\SAMBA-CUPS\dm9110]
    -   description:[\\SAMBA-CUPS\dm9110,myphantasydrivername,\
    +   description:[\\SAMBA-CUPS\dm9110,mydrivername,\
          110ppm HiVolume DANKA Stuttgart]
        comment:[110ppm HiVolume DANKA Stuttgart]
      [....]
     

    -It may be not easy to recognize: but the first call to -enumprinters showed the "dm9110" printer with an -empty string where the driver should have been listed (between the 2 -commas in the "description" field). After the -setdriver command succeeded, all is well. (The -CUPS Printing chapter has more info about the installation of printer -drivers with the help of rpcclient). -

    Adding new Printers with the Windows NT APW

    -By default, Samba exhibits all printer shares defined in -smb.conf in the -Printers... folder. Also located in this folder -is the Windows NT Add Printer Wizard icon. The APW will be shown only -if: -

    • ...the connected user is able to successfully execute -an OpenPrinterEx(\\server) with administrative -privileges (i.e. root or printer admin). -

      Tip

      Try this from a Windows 2K/XP DOS box command prompt: -

      -runas /netonly /user:root rundll32 printui.dll,PrintUIEntry /p /t0 /n \\SAMBA-SERVER\printersharename -

      -and click on Printing Preferences... -

    • ... contains the setting -show add printer wizard = yes (the -default).

    +It may not be easy to recognize that the first call to enumprinters showed the +“dm9110” printer with an empty string where the driver should have been listed (between +the 2 commas in the description field). After the setdriver command +succeeded, all is well. +

    Adding New Printers with the Windows NT APW

    +By default, Samba exhibits all printer shares defined in smb.conf in the Printers +folder. Also located in this folder is the Windows NT Add Printer Wizard icon. The APW will be shown only if: +

    • + The connected user is able to successfully execute an OpenPrinterEx(\\server) with + administrative privileges (i.e., root or printer admin). +

      Tip

      Try this from a Windows 200x/XP DOS box command prompt: +

      + runas /netonly /user:root rundll32 printui.dll,PrintUIEntry /p /t0 /n \\SAMBA-SERVER\printersharename +

      + Click on Printing Preferences. +

    • ... contains the setting + show add printer wizard = yes (the + default).

    The APW can do various things: -

    • upload a new driver to the Samba -[print$] share;

    • associate an uploaded driver with an existing (but -still "driverless") print queue;

    • exchange the currently used driver for an existing -print queue with one that has been uploaded before;

    • add an entirely new printer to the Samba host (only in -conjunction with a working add printer command; -a corresponding delete printer command for -removing entries from the Printers... folder -may be provided too)

    -The last one (add a new printer) requires more effort than the -previous ones. In order to use the APW to successfully add a printer -to a Samba server, the add printer command must -have a defined value. The program hook must successfully add the -printer to the UNIX print system (i.e. to -/etc/printcap, -/etc/cups/printers.conf or other appropriate -files) and to if necessary. +

    • + Upload a new driver to the Samba [print$] share. +

    • + Associate an uploaded driver with an existing (but still driverless) print queue. +

    • + Exchange the currently used driver for an existing print queue with one that has been uploaded before. +

    • + Add an entirely new printer to the Samba host (only in conjunction with a working + add printer command. A corresponding + delete printer command for removing entries from the + Printers folder may also be provided). +

    +The last one (add a new printer) requires more effort than the previous ones. To use +the APW to successfully add a printer to a Samba server, the add printer command must have a defined value. The program hook must successfully +add the printer to the UNIX print system (i.e., to /etc/printcap, +/etc/cups/printers.conf or other appropriate files) and to smb.conf if necessary.

    -When using the APW from a client, if the named printer share does not -exist, smbd will execute the add printer -command and reparse to the -to attempt to locate the new printer share. If the share is still not -defined, an error of Access Denied is -returned to the client. Note that the add printer command is executed under the context of the connected -user, not necessarily a root account. A map to guest = bad user may have connected you unwittingly under the wrong -privilege; you should check it by using the -smbstatus command. -

    Weird Error Message Cannot connect under a -different Name

    -Once you are connected with the wrong credentials, there is no means -to reverse the situation other than to close all Explorer windows, and -perhaps reboot. -

    • The net use \\SAMBA-SERVER\sharename -/user:root gives you an error message: Multiple -connections to a server or a shared resource by the same user -utilizing the several user names are not allowed. Disconnect all -previous connections to the server, resp. the shared resource, and try -again.

    • Every attempt to "connect a network drive" to -\\SAMBASERVER\\print$ to z: is countered by the -pertinacious message. This network folder is currently -connected under different credentials (username and password). -Disconnect first any existing connection to this network share in -order to connect again under a different username and -password.

    -So you close all connections. You try again. You get the same -message. You check from the Samba side, using -smbstatus. Yes, there are some more -connections. You kill them all. The client still gives you the same -error message. You watch the smbd.log file on a very high debug level -and try re-connect. Same error message, but not a single line in the -log. You start to wonder if there was a connection attempt at all. You -run ethereal and tcpdump while you try to connect. Result: not a -single byte goes on the wire. Windows still gives the error -message. You close all Explorer Windows and start it again. You try to -connect - and this times it works! Windows seems to cache connection -info somewhere and doesn't keep it up to date (if you are unlucky you -might need to reboot to get rid of the error message). -

    Be careful when assembling Driver Files

    -You need to be very careful when you take notes about the files and -belonging to a particular driver. Don't confuse the files for driver -version "0" (for Win95/98/ME, going into -[print$]/WIN/0/), driver version "2" (Kernel Mode -driver for WinNT, going into [print$]/W32X86/2/ -may be used on Win2K/XP too), and driver version -"3" (non-Kernel Mode driver going into -[print$]/W32X86/3/ can not -be used on WinNT). Very often these different driver versions contain -files carrying the same name; but still the files are very different! -Also, if you look at them from the Windows Explorer (they reside in -%WINDOWS%\system32\spool\drivers\W32X86\) you -will probably see names in capital letters, while an "enumdrivers" -command from Samba would show mixed or lower case letters. So it is -easy to confuse them. If you install them manually using -rpcclient and subcommands, you may even succeed -without an error message. Only later, when you try install on a -client, you will encounter error messages like This -server has no appropriate driver for the printer. +When using the APW from a client, if the named printer share does not exist, smbd will execute the +add printer command and reparse to the to attempt to locate the new printer +share. If the share is still not defined, an error of Access Denied is returned to +the client. The add printer command is executed +under the context of the connected user, not necessarily a root account. A map to guest = bad user may have connected you unwittingly under the wrong +privilege. You should check it by using the smbstatus command. +

    Error Message: “Cannot connect under a different Name

    +Once you are connected with the wrong credentials, there is no means to reverse the situation other than +to close all Explorer Windows, and perhaps reboot. +

    • + The net use \\SAMBA-SERVER\sharename /user:root gives you an error message: + “Multiple connections to a server or a shared resource by the same user utilizing + the several user names are not allowed. Disconnect all previous connections to the server, + resp. the shared resource, and try again.” +

    • + Every attempt to “connect a network drive” to \\SAMBASERVER\\print$ + to z: is countered by the pertinacious message: “This + network folder is currently connected under different credentials (username and password). + Disconnect first any existing connection to this network share in order to connect again under + a different username and password”. +

    +So you close all connections. You try again. You get the same message. You check from the Samba side, +using smbstatus. Yes, there are more connections. You kill them all. The client +still gives you the same error message. You watch the smbd.log file on a high debug level and try +reconnect. Same error message, but not a single line in the log. You start to wonder if there was a +connection attempt at all. You run ethereal and tcpdump while you try to connect. Result: not a single +byte goes on the wire. Windows still gives the error message. You close all Explorer windows and start it +again. You try to connect and this times it works! Windows seems to cache connection informtion somewhere and +does not keep it up-to-date (if you are unlucky you might need to reboot to get rid of the error message). +

    Take Care When Assembling Driver Files

    +You need to be extremely careful when you take notes about the files and belonging to a particular +driver. Don't confuse the files for driver version “0” (for Windows 9x/Me, going into +[print$]/WIN/0/), driver version 2 (Kernel Mode driver for Windows NT, +going into [print$]/W32X86/2/ may be used on Windows 200x/XP also), and +driver version “3” (non-Kernel Mode driver going into [print$]/W32X86/3/ +cannot be used on Windows NT). Quite often these different driver versions contain +files that have the same name but actually are very different. If you look at them from +the Windows Explorer (they reside in %WINDOWS%\system32\spool\drivers\W32X86\), +you will probably see names in capital letters, while an enumdrivers command from Samba +would show mixed or lower case letters. So it is easy to confuse them. If you install them manually using +rpcclient and subcommands, you may even succeed without an error message. Only later, +when you try install on a client, you will encounter error messages like This server +has no appropriate driver for the printer.

    -Here is an example. You are invited to look very closely at the -various files, compare their names and their spelling, and discover -the differences in the composition of the version-2 and -3 sets -Note: the version-0 set contained 40 (!) -Dependentfiles, so I left it out for space -reasons: +Here is an example. You are invited to look closely at the various files, compare their names and +their spelling, and discover the differences in the composition of the version 2 and 3 sets. Note: the +version 0 set contained 40 Dependentfiles, so I left it out for space reasons:

     root# rpcclient -U 'Administrator%secret' -c 'enumdrivers 3' 10.160.50.8 
     
    @@ -1860,7 +1602,7 @@ reasons:
              Defaultdatatype: []
     
     

    -If we write the "version 2" files and the "version 3" files +If we write the “version 2” files and the “version 3” files into different text files and compare the result, we see this picture:

    @@ -1892,13 +1634,14 @@ picture:
                                  > cns3ggr.dll
     
     

    -Don't be fooled though! Driver files for each version with identical + +Do not be fooled! Driver files for each version with identical names may be different in their content, as you can see from this size comparison:

     root# for i in cns3g.hlp cns3gui.dll cns3g.dll; do                  \
                smbclient //10.160.50.8/print\$ -U 'Administrator%xxxx' \
    -           -c "cd W32X86/3; dir $i; cd .. ; cd 2; dir $i";      \
    +           -c "cd W32X86/3; dir $i; cd .. ; cd 2; dir $i";      \
     		   done
     
       CNS3G.HLP               A   122981  Thu May 30 02:31:00 2002
    @@ -1909,248 +1652,213 @@ comparison:
     
       CNS3G.DLL               A  1145088  Thu May 30 02:31:00 2002
       CNS3G.DLL               A    15872  Thu May 30 02:31:00 2002
    -
     

    -In my example were even more differences than shown here. Conclusion: -you must be very careful to select the correct driver files for each -driver version. Don't rely on the names alone. Don't interchange files +In my example were even more differences than shown here. Conclusion: you must be careful to select +the correct driver files for each driver version. Don't rely on the +names alone and don't interchange files belonging to different driver versions. -

    Samba and Printer Ports

    -Windows NT/2000 print servers associate a port with each -printer. These normally take the form of LPT1:, -COM1:, FILE:, etc. Samba -must also support the concept of ports associated with a printer. By -default, only one printer port, named "Samba Printer Port", exists on -a system. Samba does not really need such a "port" in order to print; -it rather is a requirement of Windows clients. They insist on being -told about an available port when they request this info, otherwise -they throw an error message at you. So Samba fakes the port +

    Samba and Printer Ports

    +Windows NT/2000 print servers associate a port with each printer. These normally take the form of +LPT1:, COM1:, +FILE:, and so on. Samba must also +support the concept of ports associated with a printer. By default, only one printer port, named “Samba +Printer Port”, exists on a system. Samba does not really need such a “port” in order +to print; rather it is a requirement of Windows clients. They insist on being told about an available +port when they request this information, otherwise they throw an error message at you. So Samba fakes the port information to keep the Windows clients happy.

    -Note that Samba does not support the concept of "Printer Pooling" -internally either. Printer Pooling assigns a logical printer to -multiple ports as a form of load balancing or fail over. +Samba does not support the concept of Printer Pooling internally either. Printer +Pooling assigns a logical printer to multiple ports as a form of load balancing or fail over.

    -If you require that multiple ports be defined for some reason or -another (“My users and my Boss should not know that they are -working with Samba”), possesses a -enumports command which can be used to define -an external program that generates a listing of ports on a system. -

    Avoiding the most common Misconfigurations of the Client Driver

    -So - printing works, but there are still problems. Most jobs print -well, some don't print at all. Some jobs have problems with fonts, -which don't look good at all. Some jobs print fast, and some are -dead-slow. We can't cover it all; but we want to encourage you to read -the little paragraph about "Avoiding the wrong PostScript Driver -Settings" in the CUPS Printing part of this document. -

    The Imprints Toolset

    -The Imprints tool set provides a UNIX equivalent of the -Windows NT Add Printer Wizard. For complete information, please -refer to the Imprints web site -at http://imprints.sourceforge.net/ -as well as the documentation included with the imprints source -distribution. This section will only provide a brief introduction -to the features of Imprints. -

    Attention! Maintainer required.  -Unfortunately, the Imprints toolset is no longer maintained. As of -December, 2000, the project is in need of a new maintainer. The most -important skill to have is decent perl coding and an interest in -MS-RPC based printing using Samba. If you wish to volunteer, please -coordinate your efforts on the samba-technical mailing list. The -toolset is still in usable form; but only for a series of older -printer models, where there are prepared packages to use. Packages for -more up to date print devices are needed if Imprints should have a -future.

    What is Imprints?

    +If you require multiple ports be defined for some reason or another (my users and my boss should not know +that they are working with Samba), configure enumports command +which can be used to define an external program that generates a listing of ports on a system. +

    Avoiding Common Client Driver Misconfiguration

    +So now the printing works, but there are still problems. Most jobs print well, some do not print at +all. Some jobs have problems with fonts, which do not look good. Some jobs print fast and some +are dead-slow. We cannot cover it all, but we want to encourage you to read the brief paragraph about +“Avoiding the Wrong PostScript Driver Settings” in the CUPS Printing part of this document. +

    The Imprints Toolset

    +The Imprints tool set provides a UNIX equivalent of the Windows NT Add Printer +Wizard. For complete information, please refer to the Imprints Web site at http://imprints.sourceforge.net/ as well as the documentation +included with the imprints source distribution. This section only provides a brief introduction to +the features of Imprints. +

    +Unfortunately, the Imprints toolset is no longer maintained. As of December 2000, the project is in +need of a new maintainer. The most important skill to have is Perl coding and an interest in MS-RPC-based +printing used in Samba. If you wish to volunteer, please coordinate +your efforts on the Samba technical +mailing list. The toolset is still in usable form, but only for a series of older printer models where +there are prepared packages to use. Packages for more up-to-date print devices are needed if Imprints +should have a future. +

    What is Imprints?

    Imprints is a collection of tools for supporting these goals: -

    • Providing a central repository information regarding -Windows NT and 95/98 printer driver packages

    • Providing the tools necessary for creating the -Imprints printer driver packages.

    • Providing an installation client which will obtain -printer drivers from a central internet (or intranet) Imprints Server -repository and install them on remote Samba and Windows NT4 print -servers.

    Creating Printer Driver Packages

    -The process of creating printer driver packages is beyond the scope of -this document (refer to Imprints.txt also included with the Samba -distribution for more information). In short, an Imprints driver -package is a gzipped tarball containing the driver files, related INF -files, and a control file needed by the installation client. -

    The Imprints Server

    -The Imprints server is really a database server that may be queried -via standard HTTP mechanisms. Each printer entry in the database has -an associated URL for the actual downloading of the package. Each +

    • + Providing a central repository of information regarding Windows NT and 95/98 printer driver packages. +

    • + Providing the tools necessary for creating the Imprints printer driver packages. +

    • + Providing an installation client that will obtain printer drivers from a central Internet (or intranet) Imprints Server + repository and install them on remote Samba and Windows NT4 print servers. +

    Creating Printer Driver Packages

    +The process of creating printer driver packages is beyond the scope of this document (refer to Imprints.txt +also included with the Samba distribution for more information). In short, an Imprints driver package +is a gzipped tarball containing the driver files, related INF files, and a control file needed by the +installation client. +

    The Imprints Server

    +The Imprints server is really a database server that may be queried via standard HTTP mechanisms. Each +printer entry in the database has an associated URL for the actual downloading of the package. Each package is digitally signed via GnuPG which can be used to verify that -package downloaded is actually the one referred in the Imprints -database. It is strongly recommended that this security check -not be disabled. -

    The Installation Client

    -More information regarding the Imprints installation client is -available in the Imprints-Client-HOWTO.ps file -included with the imprints source package. -

    -The Imprints installation client comes in two forms. -

    • a set of command line Perl scripts

    • a GTK+ based graphical interface to the command line Perl -scripts

    -The installation client (in both forms) provides a means of querying -the Imprints database server for a matching list of known printer -model names as well as a means to download and install the drivers on +the package downloaded is actually +the one referred in the Imprints database. It is strongly recommended that this security check +not be disabled. +

    The Installation Client

    +More information regarding the Imprints installation client is available from the the documentation file +Imprints-Client-HOWTO.ps that is included with the Imprints source package. The Imprints +installation client comes in two forms: +

    • A set of command line Perl scripts.

    • A GTK+ based graphical interface to the command line Perl scripts.

    +The installation client (in both forms) provides a means of querying the Imprints database server for +a matching list of known printer model names as well as a means to download and install the drivers on remote Samba and Windows NT print servers.

    -The basic installation process is in four steps and perl code is -wrapped around smbclient and rpcclient +The basic installation process is in four steps and Perl code is wrapped around smbclient and rpcclient.

    • - foreach (supported architecture for a given driver) -

      1. rpcclient: Get the appropriate upload directory on the remote server

      2. smbclient: Upload the driver files

      3. rpcclient: Issues an AddPrinterDriver() MS-RPC

      -

    • rpcclient: Issue an AddPrinterEx() MS-RPC to actually create the printer

    -One of the problems encountered when implementing the Imprints tool -set was the name space issues between various supported client -architectures. For example, Windows NT includes a driver named "Apple -LaserWriter II NTX v51.8" and Windows 95 calls its version of this -driver "Apple LaserWriter II NTX" + For each supported architecture for a given driver: +

    1. rpcclient: Get the appropriate upload directory on the remote server.

    2. smbclient: Upload the driver files.

    3. rpcclient: Issues an AddPrinterDriver() MS-RPC.

    +

  • rpcclient: Issue an AddPrinterEx() MS-RPC to actually create the printer.

  • +One of the problems encountered when implementing the Imprints tool set was the name space issues between +various supported client architectures. For example, Windows NT includes a driver named “Apple LaserWriter +II NTX v51.8” and Windows 95 calls its version of this driver “Apple LaserWriter II NTX”.

    -The problem is how to know what client drivers have been uploaded for -a printer. An astute reader will remember that the Windows NT Printer -Properties dialog only includes space for one printer driver name. A -quick look in the Windows NT 4.0 system registry at +The problem is how to know what client drivers have been uploaded for a printer. An astute reader will +remember that the Windows NT Printer Properties dialog only includes space for one printer driver name. A +quick look in the Windows NT 4.0 system registry at:

    HKLM\System\CurrentControlSet\Control\Print\Environment

    -will reveal that Windows NT always uses the NT driver name. This is -ok as Windows NT always requires that at least the Windows NT version -of the printer driver is present. However, Samba does not have the -requirement internally. Therefore, how can you use the NT driver name -if is has not already been installed? -

    -The way of sidestepping this limitation is to require that all -Imprints printer driver packages include both the Intel Windows NT and -95/98 printer drivers and that NT driver is installed first. -

    Add Network Printers at Logon without User Interaction

    -The following MS Knowledge Base article may be of some help if you -need to handle Windows 2000 clients: How to Add Printers -with No User Interaction in Windows 2000. ( http://support.microsoft.com/default.aspx?scid=kb;en-us;189105 -). It also applies to Windows XP Professional clients. +will reveal that Windows NT always uses the NT driver name. This is okay as Windows NT always requires +that at least the Windows NT version of the printer driver is present. Samba does not have the +requirement internally, therefore, “How can you use the NT driver name if it has not already been installed?

    -The ideas sketched out below are inspired by this article. It -describes a commandline method which can be applied to install -network and local printers and their drivers. This is most useful -if integrated in Logon Scripts. You can see what options are -available by typing in a command prompt ("DOS box") this: +The way of sidestepping this limitation is to require that all Imprints printer driver packages include both the Intel Windows NT and +95/98 printer drivers and that the NT driver is installed first. +

    Adding Network Printers without User Interaction

    +The following MS Knowledge Base article may be of some help if you need to handle Windows 2000 +clients: How to Add Printers with No User Interaction in Windows 2000, (http://support.microsoft.com/default.aspx?scid=kb;en-us;189105). +It also applies to Windows XP Professional clients. +The ideas sketched out in this section are inspired by this article, which describes a commandline method that can be +applied to install network and local printers and their drivers. This is most useful if integrated in Logon +Scripts. You can see what options are available by typing in the command prompt (DOS box):

    rundll32 printui.dll,PrintUIEntry /?

    -A window pops up which shows you all of the commandline switches -available. An extensive list of examples is also provided. This is -only for Win 2k/XP. It doesn't work on WinNT. WinNT has probably some -other tools in the respective Resource Kit. Here is a suggestion about -what a client logon script might contain, with a short explanation of -what the lines actually do (it works if 2k/XP Windows clients access -printers via Samba, but works for Windows-based print servers too): +A window pops up that shows you all of the commandline switches available. An extensive list of examples +is also provided. This is only for Win 200x/XP, it does not work on +Windows NT. Windows NT probably has +some other tools in the respective Resource Kit. Here is a suggestion about what a client logon script +might contain, with a short explanation of what the lines actually do (it works if 200x/XP Windows +clients access printers via Samba, and works for Windows-based print servers too):

    -rundll32 printui.dll,PrintUIEntry /dn /n "\\sambacupsserver\infotec2105-IPDS" /q
    -rundll32 printui.dll,PrintUIEntry /in /n "\\sambacupsserver\infotec2105-PS"
    -rundll32 printui.dll,PrintUIEntry /y /n "\\sambacupsserver\infotec2105-PS"
    +rundll32 printui.dll,PrintUIEntry /dn /n "\\cupsserver\infotec2105-IPDS" /q
    +rundll32 printui.dll,PrintUIEntry /in /n "\\cupsserver\infotec2105-PS"
    +rundll32 printui.dll,PrintUIEntry /y /n "\\cupsserver\infotec2105-PS"
     

    Here is a list of the used commandline parameters: -

    /dn

    deletes a network printer

    /q

    quiet modus

    /n

    names a printer

    /in

    adds a network printer connection

    /y

    sets printer as default printer

    • Line 1 deletes a possibly existing previous network -printer infotec2105-IPDS (which had used native -Windows drivers with LPRng that were removed from the server which was -converted to CUPS). The /q at the end eliminates -"Confirm" or error dialog boxes popping up. They should not be -presented to the user logging on.

    • Line 2 adds the new printer -infotec2105-PS (which actually is same physical -device but is now run by the new CUPS printing system and associated -with the CUPS/Adobe PS drivers). The printer and its driver -must have been added to Samba prior to the user -logging in (e.g. by a procedure as discussed earlier in this chapter, -or by running cupsaddsmb). The driver is now -auto-downloaded to the client PC where the user is about to log -in.

    • Line 3 sets the default printer to this new network -printer (there might be several other printers installed with this -same method and some may be local as well -- so we decide for a -default printer). The default printer selection may of course be -different for different users.

    -Note that the second line only works if the printer -infotec2105-PS has an already working print queue -on "sambacupsserver", and if the printer drivers have successfully been -uploaded (via APW , -smbclient/rpcclient or -cupsaddsmb) into the -[print$] driver repository of Samba. Also, some -Samba versions prior to version 3.0 required a re-start of smbd after -the printer install and the driver upload, otherwise the script (or -any other client driver download) would fail. +

    /dn

    deletes a network printer

    /q

    quiet modus

    /n

    names a printer

    /in

    adds a network printer connection

    /y

    sets printer as default printer

    • + Line 1 deletes a possibly existing previous network printer infotec2105-IPDS + (which had used native Windows drivers with LPRng that were removed from the server that was + converted to CUPS). The /q at the end eliminates Confirm + or error dialog boxes from popping up. They should not be presented to the user logging on. +

    • + Line 2 adds the new printer + infotec2105-PS (which actually is the same + physical device but is now run by the new CUPS printing system and associated with the + CUPS/Adobe PS drivers). The printer and its driver must have been added to Samba prior to + the user logging in (e.g., by a procedure as discussed earlier in this chapter, or by running + cupsaddsmb). The driver is now auto-downloaded to the client PC where the + user is about to log in. +

    • + Line 3 sets the default printer to this new network printer (there might be several other + printers installed with this same method and some may be local as well, so we decide for a + default printer). The default printer selection may, of course, be different for different users. +

    +The second line only works if the printer infotec2105-PS has an already working +print queue on the cupsserver, and if the +printer drivers have been successfully uploaded +(via the APW, smbclient/rpcclient, or cupsaddsmb) +into the [print$] driver repository of Samba. Some Samba versions +prior to version 3.0 required a re-start of smbd after the printer install and the driver upload, +otherwise the script (or any other client driver download) would fail.

    -Since there no easy way to test for the existence of an installed -network printer from the logon script, the suggestion is: don't bother -checking and just allow the deinstallation/reinstallation to occur -every time a user logs in; it's really quick anyway (1 to 2 seconds). +Since there no easy way to test for the existence of an installed network printer from the logon script, +do not bother checking, just allow the deinstallation/reinstallation to occur every time a user logs in; +it's really quick anyway (1 to 2 seconds).

    The additional benefits for this are: -

    • It puts in place any printer default setup changes -automatically at every user logon.

    • It allows for "roaming" users' login into the domain from -different workstations.

    -Since network printers are installed per user this much simplifies the -process of keeping the installation up-to-date. The extra few seconds -at logon time will not really be noticeable. Printers can be centrally -added, changed, and deleted at will on the server with no user -intervention required on the clients (you just need to keep the logon -scripts up to date). -

    The addprinter command

    -The addprinter command can be configured to be a -shell script or program executed by Samba. It is triggered by running -the APW from a client against the Samba print server. The APW asks the -user to fill in several fields (such as printer name, driver to be -used, comment, port monitor, etc.). These parameters are passed on to -Samba by the APW. If the addprinter command is designed in a way that -it can create a new printer (through writing correct printcap entries -on legacy systems, or execute the lpadmin command -on more modern systems) and create the associated share in -, then the APW will in effect really -create a new printer on Samba and the UNIX print subsystem! -

    Migration of "Classical" printing to Samba

    -The basic "NT-style" printer driver management has not changed -considerably in 3.0 over the 2.2.x releases (apart from many small -improvements). Here migration should be quite easy, especially if you -followed previous advice to stop using deprecated parameters in your -setup. For migrations from an existing 2.0.x setup, or if you -continued "Win9x-style" printing in your Samba 2.2 installations, it -is more of an effort. Please read the appropriate release notes and -the HOWTO Collection for 2.2. You can follow several paths. Here are -possible scenarios for migration: -

    • You need to study and apply the new Windows NT printer -and driver support. Previously used parameters printer -driver file, printer driver and -printer driver location are no longer -supported.

    • If you want to take advantage of WinNT printer driver -support you also need to migrate the Win9x/ME drivers to the new -setup.

    • An existing printers.def file - (the one specified in the now removed parameter printer driver file) will work no longer with samba 3. In -3.0, smbd attempts to locate a Win9x/ME driver files for the printer -in [print$] and additional settings in the TDB -and only there; if it fails it will not (as 2.2.x -used to do) drop down to using a printers.def -(and all associated parameters). The make_printerdef tool is removed -and there is no backwards compatibility for this.

    • You need to install a Windows 9x driver into the -[print$] share for a printer on your Samba -host. The driver files will be stored in the "WIN40/0" subdirectory of -[print$], and some other settings and info go -into the printing-related TDBs.

    • If you want to migrate an existing -printers.def file into the new setup, the current -only solution is to use the Windows NT APW to install the NT drivers -and the 9x drivers. This can be scripted using smbclient and -rpcclient. See the Imprints installation client at: -

      - http://imprints.sourceforge.net/ -

      -for an example. See also the discussion of rpcclient usage in the -"CUPS Printing" section.

    Publishing Printer Information in Active Directory or LDAP

    -We will publish an update to this section shortly. -

    Common Errors

    I give my root password but I don't get access

    -Don't confuse the root password which is valid for the UNIX system -(and in most cases stored in the form of a one-way hash in a file -named /etc/shadow) with the password used to -authenticate against Samba!. Samba doesn't know the UNIX password; for -root to access Samba resources via Samba-type access, a Samba account -for root must be created first. This is often done with the -smbpasswd command. -

    My printjobs get spooled into the spooling directory, but then get lost

    -Don't use the existing UNIX print system spool directory for the Samba -spool directory. It may seem convenient and a saving of space, but it -only leads to problems. The two must be separate. -

    +

    • + It puts in place any printer default setup changes automatically at every user logon. +

    • + It allows for “roaming” users' login into the domain from different workstations. +

    +Since network printers are installed per user, this much simplifies the process of keeping the installation +up-to-date. The few extra seconds at logon time will not really be noticeable. Printers can be centrally +added, changed and deleted at will on the server with no user intervention required from the clients +(you just need to keep the logon scripts up-to-date). +

    The addprinter Command

    +The addprinter command can be configured to be a shell script or program executed by +Samba. It is triggered by running the APW from a client against the Samba print server. The APW asks +the user to fill in several fields (such as printer name, driver to be used, comment, port monitor, +and so on). These parameters are passed on to Samba by the APW. If the addprinter command is designed in a +way that it can create a new printer (through writing correct printcap entries on legacy systems, or +execute the lpadmin command on more modern systems) and create the associated share +in, then the APW will in effect really create a new printer on Samba and the UNIX print subsystem! +

    Migration of Classical Printing to Samba

    +The basic NT-style printer driver management has not changed considerably in 3.0 over the 2.2.x releases +(apart from many small improvements). Here migration should be quite easy, especially if you followed +previous advice to stop using deprecated parameters in your setup. For migrations from an existing 2.0.x +setup, or if you continued Windows 9x/Me-style printing in your Samba 2.2 installations, it is more of +an effort. Please read the appropriate release notes and the HOWTO Collection for Samba-2.2.x. You can +follow several paths. Here are possible scenarios for migration: +

    • + You need to study and apply the new Windows NT printer and driver support. Previously used + parameters printer driver file, printer driver + and printer driver location are no longer supported. +

    • + If you want to take advantage of Windows NT printer driver support, you also need to migrate the + Windows 9x/Me drivers to the new setup. +

    • + An existing printers.def file (the one specified in the now removed parameter + printer driver file) will no longer work with Samba-3. In 3.0, smbd attempts + to locate a Windows 9x/Me driver files for the printer in [print$] + and additional settings in the TDB and only there; if it fails, it will not + (as 2.2.x used to do) drop down to using a printers.def (and all associated + parameters). The make_printerdef tool is removed and there is no backward compatibility for this. +

    • You need to install a Windows 9x/Me driver into the + [print$] share for a printer on your Samba + host. The driver files will be stored in the “WIN40/0” subdirectory of + [print$], and some other settings and information go + into the printing-related TDBs.

    • If you want to migrate an existing + printers.def file into the new setup, the + only current + solution is to use the Windows NT APW to install the NT drivers + and the 9x/Me drivers. This can be scripted using smbclient and + rpcclient. See the Imprints installation client at: +

      + http://imprints.sourceforge.net/ +

      + for an example. See also the discussion of rpcclient usage in the + “CUPS Printing” section.

    Publishing Printer Information in Active Directory or LDAP

    +This will be addressed in a later update of this document. If you wish to volunteer your services to help +document this, please contact John H Terpstra. +

    Common Errors

    I Give My Root Password but I Do Not Get Access

    +Do not confuse the root password which is valid for the UNIX system (and in most cases stored in the +form of a one-way hash in a file named /etc/shadow), with the password used to +authenticate against Samba. Samba does not know the UNIX password. Root access to Samba resources +requires that a Samba account for root must first be created. This is done with the smbpasswd +command as follows: +

    +root#  smbpasswd -a root
    +New SMB password: secret
    +Retype new SMB password: secret
    +

    My Print Jobs Get Spooled into the Spooling Directory, but Then Get Lost

    +Do not use the existing UNIX print system spool directory for the Samba spool directory. It may seem +convenient and a savings of space, but it only leads to problems. The two must be separate. +

    diff --git a/docs/htmldocs/problems.html b/docs/htmldocs/problems.html index 24ddc7c02c..41ec5ccbd2 100644 --- a/docs/htmldocs/problems.html +++ b/docs/htmldocs/problems.html @@ -1,138 +1,135 @@ -Chapter 34. Analysing and solving samba problems

    Chapter 34. Analysing and solving samba problems

    Gerald (Jerry) Carter

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    David Bannon

    Samba Team

    8 Apr 2003

    +Chapter 34. Analyzing and Solving Samba Problems

    Chapter 34. Analyzing and Solving Samba Problems

    Gerald (Jerry) Carter

    Samba Team

    Jelmer R. Vernooij

    The Samba Team

    David Bannon

    Samba Team

    Dan Shearer

    Samba Team

    8 Apr 2003

    There are many sources of information available in the form -of mailing lists, RFC's and documentation. The docs that come -with the samba distribution contain very good explanations of -general SMB topics such as browsing.

    Diagnostics tools

    With SMB networking, it is often not immediately clear what +of mailing lists, RFCs and documentation. The documentation that comes +with the Samba distribution contains good explanations of +general SMB topics such as browsing.

    Diagnostics Tools

    With SMB networking, it is often not immediately clear what the cause is of a certain problem. Samba itself provides rather useful information, but in some cases you might have to fall back to using a sniffer. A sniffer is a program that -listens on your LAN, analyses the data sent on it and displays it -on the screen.

    Debugging with Samba itself

    -One of the best diagnostic tools for debugging problems is Samba itself. -You can use the -d option for both smbd and nmbd to specify what -debug level at which to run. See the man pages on smbd, nmbd and -smb.conf for more information on debugging options. The debug +listens on your LAN, analyzes the data sent on it and displays it +on the screen.

    Debugging with Samba Itself

    +One of the best diagnostic tools for debugging problems is Samba itself. +You can use the -d option for both smbd and nmbd to specify the +debug level at which to run. +See the man pages for smbd, nmbd and +smb.conf for more information regarding debugging options. The debug level can range from 1 (the default) to 10 (100 for debugging passwords).

    -Another helpful method of debugging is to compile samba using the -gcc -g flag. This will include debug -information in the binaries and allow you to attach gdb to the -running smbd / nmbd process. In order to attach gdb to an smbd +Another helpful method of debugging is to compile Samba using the +gcc -g flag. This will include debug information in the binaries and +allow you to attach gdb to the running smbd/nmbd process. +To attach gdb to an smbd process for an NT workstation, first get the workstation to make the connection. Pressing ctrl-alt-delete and going down to the domain box -is sufficient (at least, on the first time you join the domain) to -generate a 'LsaEnumTrustedDomains'. Thereafter, the workstation -maintains an open connection, and therefore there will be an smbd +is sufficient (at least, the first time you join the domain) to +generate a LsaEnumTrustedDomains. Thereafter, the workstation +maintains an open connection and there will be an smbd process running (assuming that you haven't set a really short smbd -idle timeout) So, in between pressing ctrl alt delete, and actually -typing in your password, you can attach gdb and continue. +idle timeout). So, in between pressing ctrl-alt-delete and actually +typing in your password, you can attach gdb and continue.

    -Some useful samba commands worth investigating: +Some useful Samba commands worth investigating are:

     $ testparm | more
     $ smbclient -L //{netbios name of server}
    -

    Tcpdump

    Tcpdump was the first -unix sniffer with SMB support. It is a command-line utility and -nowadays, it's SMB support is somewhat less then that of ethereal -and tethereal.

    Ethereal

    -Ethereal is a graphical -sniffer, available for both unix (Gtk) and Windows. Ethereal's -SMB support is very good.

    For details on the use of ethereal, read the well-written -ethereal User Guide.

    -Listen for data on ports 137, 138, 139 and 445. E.g. -use the filter port 137 or port 138 or port 139 or port 445.

    A console version of ethereal is available as well and is called -tethereal.

    The Windows Network Monitor

    -For tracing things on the Microsoft Windows NT, Network Monitor -(aka. netmon) is available on the Microsoft Developer Network CD's, -the Windows NT Server install CD and the SMS CD's. The version of -netmon that ships with SMS allows for dumping packets between any two -computers (i.e. placing the network interface in promiscuous mode). +

    Tcpdump

    +Tcpdump was the first +UNIX sniffer with SMB support. It is a command-line utility and +now, its SMB support is somewhat lagging that of ethereal +and tethereal. +

    Ethereal

    +Ethereal is a graphical +sniffer, available for both UNIX (Gtk) and Windows. Ethereal's +SMB support is quite good.

    For details on the use of ethereal, read the well-written +Ethereal User Guide.

    Figure 34.1. Starting a capture.

    Starting a capture.

    +Listen for data on ports 137, 138, 139, and 445. For example, use the filter port 137, port 138, port 139, or port 445 as seen in .

    A console version of ethereal is available as well and is called +tethereal.

    Figure 34.2. Main ethereal data window.

    Main ethereal data window.

    The Windows Network Monitor

    +For tracing things on Microsoft Windows NT, Network Monitor +(aka Netmon) is available on Microsoft Developer Network CDs, +the Windows NT Server install CD and the SMS CDs. The version of +Netmon that ships with SMS allows for dumping packets between any two +computers (i.e., placing the network interface in promiscuous mode). The version on the NT Server install CD will only allow monitoring of network traffic directed to the local NT box and broadcasts on the -local subnet. Be aware that Ethereal can read and write netmon +local subnet. Be aware that Ethereal can read and write Netmon formatted files. -

    Installing 'Network Monitor' on an NT Workstation

    -Installing netmon on an NT workstation requires a couple -of steps. The following are for installing Netmon V4.00.349, which comes +

    Installing Network Monitor on an NT Workstation

    +Installing Netmon on an NT workstation requires a couple +of steps. The following are instructions for installing Netmon V4.00.349, which comes with Microsoft Windows NT Server 4.0, on Microsoft Windows NT -Workstation 4.0. The process should be similar for other versions of -Windows NT / Netmon. You will need both the Microsoft Windows +Workstation 4.0. The process should be similar for other versions of +Windows NT version of Netmon. You will need both the Microsoft Windows NT Server 4.0 Install CD and the Workstation 4.0 Install CD.

    Initially you will need to install Network Monitor Tools and Agent -on the NT Server. To do this -

    • Goto Start - Settings - Control Panel - - Network - Services - Add

    • Select the Network Monitor Tools and Agent and - click on OK.

    • Click OK on the Network Control Panel. -

    • Insert the Windows NT Server 4.0 install CD - when prompted.

    -At this point the Netmon files should exist in -%SYSTEMROOT%\System32\netmon\*.*. -Two subdirectories exist as well, parsers\ -which contains the necessary DLL's for parsing the netmon packet -dump, and captures\. +on the NT Server to do this: +

    • Go to Start -> Settings -> Control Panel -> + Network -> Services -> Add.

    • Select the Network Monitor Tools and Agent and click on OK.

    • Click on OK on the Network Control Panel.

    • Insert the Windows NT Server 4.0 install CD when prompted.

    +At this point, the Netmon files should exist in %SYSTEMROOT%\System32\netmon\*.*. +Two subdirectories exist as well, parsers\ which contains the necessary DLLs +for parsing the Netmon packet dump, and captures\.

    -In order to install the Netmon tools on an NT Workstation, you will -first need to install the 'Network Monitor Agent' from the Workstation -install CD. -

    • Goto Start - Settings - Control Panel - - Network - Services - Add

    • Select the Network Monitor Agent and click - on OK.

    • Click OK on the Network Control Panel. -

    • Insert the Windows NT Workstation 4.0 install - CD when prompted.

    -Now copy the files from the NT Server in %SYSTEMROOT%\System32\netmon\*.* -to %SYSTEMROOT%\System32\netmon\*.* on the Workstation and set -permissions as you deem appropriate for your site. You will need -administrative rights on the NT box to run netmon. -

    Installing 'Network Monitor' on an 9x Workstation

    -To install Netmon on a Windows 9x box install the network monitor agent -from the Windows 9x CD (\admin\nettools\netmon). There is a readme -file located with the netmon driver files on the CD if you need -information on how to do this. Copy the files from a working -Netmon installation. -

    Useful URLs

    Getting help from the mailing lists

    -There are a number of Samba related mailing lists. Go to http://samba.org, click on your nearest mirror -and then click on Support and then click on -Samba related mailing lists. +To install the Netmon tools on an NT Workstation, you will first need to install the +Network Monitor Agent from the Workstation install CD. +

    • Go to Start -> Settings -> Control Panel -> + Network -> Services -> Add.

    • Select the Network Monitor Agent, click on OK.

    • Click on OK in the Network Control Panel. +

    • Insert the Windows NT Workstation 4.0 install CD when prompted.

    +Now copy the files from the NT Server in %SYSTEMROOT%\System32\netmon +to %SYSTEMROOT%\System32\netmon on the Workstation and set permissions +as you deem appropriate for your site. You will need administrative rights on the NT box to run Netmon. +

    Installing Network Monitor on Windows 9x/Me

    +To install Netmon on Windows 9x/Me, install the Network Monitor Agent +from the Windows 9x/Me CD (\admin\nettools\netmon). +There is a readme file located with the Netmon driver files on the CD if you need +information on how to do this. Copy the files from a working Netmon installation. +

    Useful URLs

    • See how Scott Merrill simulates a BDC behavior at + + http://www.skippy.net/linux/smb-howto.html.

    • FTP site for older SMB specs: + + ftp://ftp.microsoft.com/developr/drg/CIFS/

    Getting Mailing List Help

    +There are a number of Samba-related mailing lists. Go to http://samba.org, click on your nearest mirror +and then click on Support and next click on +Samba-related mailing lists.

    -For questions relating to Samba TNG go to -http://www.samba-tng.org/ -It has been requested that you don't post questions about Samba-TNG to the -main stream Samba lists.

    -If you post a message to one of the lists please observe the following guide lines : -

    • Always remember that the developers are volunteers, they are -not paid and they never guarantee to produce a particular feature at -a particular time. Any time lines are 'best guess' and nothing more. -

    • Always mention what version of samba you are using and what -operating system its running under. You should probably list the -relevant sections of your smb.conf file, at least the options -in [global] that affect PDC support.

    • In addition to the version, if you obtained Samba via -CVS mention the date when you last checked it out.

    • Try and make your question clear and brief, lots of long, -convoluted questions get deleted before they are completely read ! -Don't post html encoded messages (if you can select colour or font -size its html).

    • If you run one of those nifty 'I'm on holidays' things when -you are away, make sure its configured to not answer mailing lists. -

    • Don't cross post. Work out which is the best list to post to -and see what happens, i.e. don't post to both samba-ntdom and samba-technical. -Many people active on the lists subscribe to more -than one list and get annoyed to see the same message two or more times. -Often someone will see a message and thinking it would be better dealt -with on another, will forward it on for you.

    • You might include partial -log files written at a debug level set to as much as 20. -Please don't send the entire log but enough to give the context of the -error messages.

    • (Possibly) If you have a complete netmon trace ( from the opening of -the pipe to the error ) you can send the *.CAP file as well.

    • Please think carefully before attaching a document to an email. -Consider pasting the relevant parts into the body of the message. The samba -mailing lists go to a huge number of people, do they all need a copy of your -smb.conf in their attach directory?

    How to get off the mailing lists

    To have your name removed from a samba mailing list, go to the -same place you went to to get on it. Go to http://lists.samba.org, -click on your nearest mirror and then click on Support and -then click on Samba related mailing lists. +For questions relating to Samba TNG, go to +http://www.samba-tng.org/. +It has been requested that you do not post questions about Samba-TNG to the +main-stream Samba lists.

    +If you do post a message to one of the lists, please observe the following guidelines : +

    • Always remember that the developers are volunteers, they are + not paid and they never guarantee to produce a particular feature at + a particular time. Any timelines are “best guess” and nothing more. +

    • Always mention what version of Samba you are using and what + operating system it's running under. You should list the relevant sections of + your smb.conf file, at least the options in [global] + that affect PDC support. +

    • In addition to the version, if you obtained Samba via + CVS, mention the date when you last checked it out.

    • Try and make your questions clear and brief. Lots of long, + convoluted questions get deleted before they are completely read! + Do not post HTML encoded messages. Most people on mailing lists simply delete + them. +

    • If you run one of those nifty “I'm on holidays” things when + you are away, make sure its configured to not answer mailing list traffic. Auto-responses + to mailing lists really irritate the thousands of people who end up having to deal + with such bad netiquet bahavior. +

    • Don't cross post. Work out which is the best list to post to + and see what happens. Do not post to both samba-ntdom and samba-technical. + Many people active on the lists subscribe to more + than one list and get annoyed to see the same message two or more times. + Often someone will see a message and thinking it would be better dealt + with on another list, will forward it on for you.

    • You might include partial + log files written at a debug level set to as much as 20. + Please do not send the entire log but just enough to give the context of the + error messages.

    • If you have a complete Netmon trace (from the opening of + the pipe to the error), you can send the *.CAP file as well.

    • Please think carefully before attaching a document to an email. + Consider pasting the relevant parts into the body of the message. The Samba + mailing lists go to a huge number of people. Do they all need a copy of your + smb.conf in their attach directory?

    How to Get Off the Mailing Lists

    To have your name removed from a Samba mailing list, go to the same +place where you went to +subscribe to it. Go to http://lists.samba.org, +click on your nearest mirror, click on Support and +then click on Samba related mailing lists.

    -Please don't post messages to the list asking to be removed, you will just -be referred to the above address (unless that process failed in some way...) -

    +Please do not post messages to the list asking to be removed. You will only +be referred to the above address (unless that process failed in some way). +

    diff --git a/docs/htmldocs/rpcclient.1.html b/docs/htmldocs/rpcclient.1.html index e1ff391cbc..9dca910956 100644 --- a/docs/htmldocs/rpcclient.1.html +++ b/docs/htmldocs/rpcclient.1.html @@ -5,7 +5,7 @@ have now written scripts around it to manage Windows NT clients from their UNIX workstation.

    OPTIONS

    server

    NetBIOS name of Server to which to connect. The server can be any SMB/CIFS server. The name is - resolved using the name resolve order line from smb.conf(5).

    -c|--command='command string'

    execute semicolon separated commands (listed + resolved using the name resolve order line from smb.conf(5).

    -c|--command='command string'

    execute semicolon separated commands (listed below))

    -I IP-address

    IP address is the address of the server to connect to. It should be specified in standard "a.b.c.d" notation.

    Normally the client would attempt to locate a named SMB/CIFS server by looking it up via the NetBIOS name resolution @@ -15,8 +15,8 @@ address and the NetBIOS name component of the resource being connected to will be ignored.

    There is no default for this parameter. If not supplied, it will be determined automatically by the client as described - above.

    -V

    Prints the version number for -smbd.

    -s <configuration file>

    The file specified contains the + above.

    -V

    Prints the program version number. +

    -s <configuration file>

    The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well @@ -29,13 +29,13 @@ not specified is zero.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of +day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will -override the log level parameter +override the log level parameter in the smb.conf file.

    -l|--logfile=logbasename

    File name for log/debug files. The extension ".client" will be appended. The log file is never removed by the client. @@ -70,7 +70,7 @@ via the ps command. To be safe always allow rpcclient to prompt for a password and type it in directly.

    -n <primary NetBIOS name>

    This option allows you to override the NetBIOS name that Samba uses for itself. This is identical -to setting the netbios name parameter in the smb.conf file. +to setting the netbios name parameter in the smb.conf file. However, a command line setting will take precedence over settings in smb.conf.

    -i <scope>

    This specifies a NetBIOS scope that diff --git a/docs/htmldocs/samba-bdc.html b/docs/htmldocs/samba-bdc.html index c3be7504e2..13a35e5198 100644 --- a/docs/htmldocs/samba-bdc.html +++ b/docs/htmldocs/samba-bdc.html @@ -1,87 +1,81 @@ -Chapter 6. Backup Domain Control

    Chapter 6. Backup Domain Control

    John H. Terpstra

    Samba Team

    Volker Lendecke

    -Before you continue reading in this section, please make sure that you are comfortable -with configuring a Samba Domain Controller as described in chapter on setting up Samba as a PDC. -

    Features And Benefits

    -This is one of the most difficult chapters to summarise. It does not matter what we say here -for someone will still draw conclusions and / or approach the Samba-Team with expectations +Chapter 6. Backup Domain Control

    Chapter 6. Backup Domain Control

    John H. Terpstra

    Samba Team

    Volker Lendecke

    Guenther Deschner

    LDAP updates

    +Before you continue reading this section, please make sure that you are comfortable +with configuring a Samba Domain Controller as described in . +

    Features and Benefits

    +This is one of the most difficult chapters to summarize. It does not matter what we say here +for someone will still draw conclusions and/or approach the Samba Team with expectations that are either not yet capable of being delivered, or that can be achieved far more effectively using a totally different approach. In the event that you should have a persistent -concern that is not addressed in this book then please email -John H Terpstra clearly setting out your requirements -and / or question and we will do our best to provide a solution. +concern that is not addressed in this book, please email John H. Terpstra +clearly setting out your requirements and/or question and we will do our best to provide a solution.

    -Samba-3 is capable of acting as a Backup Domain Controller to another Samba Primary Domain -Controller. A Samba-3 PDC can operate with an LDAP Account backend. The LDAP backend can be + +Samba-3 is capable of acting as a Backup Domain Controller (BDC) to another Samba Primary Domain +Controller (PDC). A Samba-3 PDC can operate with an LDAP Account backend. The LDAP backend can be either a common master LDAP server, or a slave server. The use of a slave LDAP server has the -benefit that when the master is down clients may still be able to log onto the network. -This effectively gives samba a high degree of scalability iand is a very sweet (nice) solution -for large organisations. +benefit that when the master is down, clients may still be able to log onto the network. +This effectively gives Samba a high degree of scalability and is an effective solution +for large organizations. Do not use an LDAP slave server for a PDC, this may cause serious +stability and operational problems.

    + While it is possible to run a Samba-3 BDC with non-LDAP backend, the administrator will -need to figure out precisely what is the best way to replicate (copy / distribute) the -user and machine Accounts backend. +need to figure out precisely what is the best way to replicate (copy/distribute) the +user and machine accounts' backend.

    -The use of a non-LDAP backend SAM database is particularly problematic because Domain member -servers and workstations periodically change the machine trust account password. The new + +The use of a non-LDAP backend SAM database is particularly problematic because Domain Member +servers and workstations periodically change the Machine Trust Account password. The new password is then stored only locally. This means that in the absence of a centrally stored -accounts database (such as that provided with an LDAP based solution) if Samba-3 is running -as a BDC, the BDC instance of the Domain member trust account password will not reach the -PDC (master) copy of the SAM. If the PDC SAM is then replicated to BDCs this results in -overwriting of the SAM that contains the updated (changed) trust account password with resulting +accounts database (such as that provided with an LDAP-based solution) if Samba-3 is running +as a BDC, the BDC instance of the Domain Member trust account password will not reach the +PDC (master) copy of the SAM. If the PDC SAM is then replicated to BDCs, this results in +overwriting the SAM that contains the updated (changed) trust account password with resulting breakage of the domain trust.

    -Considering the number of comments and questions raised concerning how to configure a BDC -lets consider each possible option and look at the pro's and con's for each theoretical solution: -

    Backup Domain Backend Account Distribution Options

    • - Solution: Passwd Backend is LDAP based, BDCs use a slave LDAP server -

      - Arguments For: This is a neat and manageable solution. The LDAP based SAM (ldapsam) - is constantly kept up to date. -

      - Arguments Against: Complexity -

    • - Passdb Backend is tdbsam based, BDCs use cron based net rpc vampire to - obtain the Accounts database from the PDC and place them into the Samba SAM. - net rpc vampire is a Samba function of the "net" command. -

      - Arguments For: It would be a nice solution -

      - Arguments Against: It does not work because Samba-3 does not support the required - protocols. This may become a later feature but is not available today. -

    • - Make use of rsync to replicate (pull down) copies of the essential account files -

      - Arguments For: It is a simple solution, easy to set up as a scheduled job -

      - Arguments Against: This will over-write the locally changed machine trust account - passwords. This is a broken and flawed solution. Do NOT do this. -

    • - Operate with an entirely local accounts database (not recommended) -

      - Arguments For: Simple, easy to maintain -

      - Arguments Against: All machine trust accounts and user accounts will be locally - maintained. Domain users will NOT be able to roam from office to office. This is - a broken and flawed solution. Do NOT do this. -

    Essential Background Information

    +Considering the number of comments and questions raised concerning how to configure a BDC, +let's consider each possible option and look at the pros and cons for each possible solution. + lists possible design configurations for a PDC/BDC infrastructure. + + + + +

    Table 6.1. Domain Backend Account Distribution Options

    PDC BackendBDC BackendNotes/Discussion

    Master LDAP Server

    Slave LDAP Server

    The optimal solution that provides high integrity. The SAM will be + replicated to a common master LDAP server.

    Single Central LDAP Server

    Single Central LDAP Server

    + A workable solution without fail-over ability. This is a useable solution, but not optimal. +

    tdbsam

    tdbsam + net rpc vampire

    + Does not work with Samba-3.0.0; may be implemented in a later release. The downside of this solution + is that an external process will control account database integrity. This solution may appeal to sites + that wish to avoid the complexity of LDAP. The net rpc vampire is used to + synchronize domain accounts from the PDC to the BDC. +

    tdbsam

    tdbsam + rsync

    + Do not use this configuration. + Does not work because the TDB files are live and data may not have been flushed to disk. + Use rsync to synchronize the TDB database files from the PDC to the BDC. +

    smbpasswd file

    smbpasswd file

    + Do not use this configuration. + Not an elegant solution due to the delays in synchronization. + Use rsync to synchronize the TDB database files from the PDC to the BDC. + Can be made to work using a cron job to synchronize data from the PDC to the BDC. +

    Essential Background Information

    A Domain Controller is a machine that is able to answer logon requests from network workstations. Microsoft LanManager and IBM LanServer were two early products that provided this capability. The technology has become known as the LanMan Netlogon service.

    -When MS Windows NT3.10 was first released, it supported an new style of Domain Control +When MS Windows NT3.10 was first released, it supported a new style of Domain Control and with it a new form of the network logon service that has extended functionality. This service became known as the NT NetLogon Service. The nature of this service has -changed with the evolution of MS Windows NT and today provides a very complex array of -services that are implemented over a complex spectrum of technologies. -

    MS Windows NT4 Style Domain Control

    -Whenever a user logs into a Windows NT4 / 200x / XP Professional Workstation, -the workstation connects to a Domain Controller (authentication server) to validate -the username and password that the user entered are valid. If the information entered -does not validate against the account information that has been stored in the Domain -Control database (the SAM, or Security Account Manager database) then a set of error +changed with the evolution of MS Windows NT and today provides a complex array of +services that are implemented over an intricate spectrum of technologies. +

    MS Windows NT4-style Domain Control

    +Whenever a user logs into a Windows NT4/200x/XP Professional Workstation, +the workstation connects to a Domain Controller (authentication server) to validate that +the username and password the user entered are valid. If the information entered +does not match account information that has been stored in the Domain +Control database (the SAM, or Security Account Manager database), a set of error codes is returned to the workstation that has made the authentication request.

    -When the username / password pair has been validated, the Domain Controller +When the username/password pair has been validated, the Domain Controller (authentication server) will respond with full enumeration of the account information that has been stored regarding that user in the User and Machine Accounts database for that Domain. This information contains a complete network access profile for @@ -92,9 +86,10 @@ network access time limits, account validity information, machine names from whi user may access the network, and much more. All this information was stored in the SAM in all versions of MS Windows NT (3.10, 3.50, 3.51, 4.0).

    + The account information (user and machine) on Domain Controllers is stored in two files, one containing the Security information and the other the SAM. These are stored in files -by the same name in the C:\WinNT\System32\config directory. These +by the same name in the C:\Windows NT\System32\config directory. These are the files that are involved in replication of the SAM database where Backup Domain Controllers are present on the network.

    @@ -106,139 +101,240 @@ There are two situations in which it is desirable to install Backup Domain Contr

  • At each remote site, to reduce wide area network traffic and to add stability to remote network operations. The design of the network, the strategic placement of - Backup Domain Controllers, together with an implementation that localises as much - of network to client interchange as possible will help to minimise wide area network + Backup Domain Controllers, together with an implementation that localizes as much + of network to client interchange as possible will help to minimize wide area network bandwidth needs (and thus costs).

  • -The PDC contains the master copy of the SAM. In the event that an administrator makes a -change to the user account database while physically present on the local network that -has the PDC, the change will likely be made directly to the PDC instance of the master -copy of the SAM. In the event that this update may be performed in a branch office the -change will likely be stored in a delta file on the local BDC. The BDC will then send -a trigger to the PDC to commence the process of SAM synchronisation. The PDC will then -request the delta from the BDC and apply it to the master SAM. The PDC will then contact -all the BDCs in the Domain and trigger them to obtain the update and then apply that to -their own copy of the SAM. +The inter-operation of a PDC and its BDCs in a true Windows NT4 environemt is worth +mentioning here. The PDC contains the master copy of the SAM. In the event that an +administrator makes a change to the user account database while physically present +on the local network that has the PDC, the change will likely be made directly to +the PDC instance of the master copy of the SAM. In the event that this update may +be performed in a branch office, the change will likely be stored in a delta file +on the local BDC. The BDC will then send a trigger to the PDC to commence the process +of SAM synchronization. The PDC will then request the delta from the BDC and apply +it to the master SAM. The PDC will then contact all the BDCs in the Domain and +trigger them to obtain the update and then apply that to their own copy of the SAM. +

    +Samba-3 can not participate in true SAM replication and is therefore not able to +employ precisely the same protocols used by MS Windows NT4. A Samba-3 BDC will +not create SAM update delta files. It will not inter-operate with a PDC (NT4 or Samba) +to synchronize the SAM from delta files that are held by BDCs.

    -Thus the BDC is said to hold a read-only of the SAM from which -it is able to process network logon requests and to authenticate users. The BDC can +Samba-3 cannot function as a BDC to an MS Windows NT4 PDC, and Samba-3 can not +function correctly as a PDC to an MS Windows NT4 BDC. Both Samba-3 and MS Windows +NT4 can function as a BDC to its own type of PDC. +

    +The BDC is said to hold a read-only of the SAM from which +it is able to process network logon requests and authenticate users. The BDC can continue to provide this service, particularly while, for example, the wide area -network link to the PDC is down. Thus a BDC plays a very important role in both -maintenance of Domain security as well as in network integrity. +network link to the PDC is down. A BDC plays a very important role in both the +maintenance of Domain Security as well as in network integrity.

    -In the event that the PDC should need to be taken out of service, or if it dies, then -one of the BDCs can be promoted to a PDC. If this happens while the original PDC is on -line then it is automatically demoted to a BDC. This is an important aspect of Domain -Controller management. The tool that is used to affect a promotion or a demotion is the -Server Manager for Domains. -

    Example PDC Configuration

    -Since version 2.2 Samba officially supports domain logons for all current Windows Clients, -including Windows NT4, 2003 and XP Professional. For samba to be enabled as a PDC some -parameters in the [global]-section of the smb.conf have to be set: -

    Example 6.1. Minimal smb.conf for being a PDC

    workgroup = MIDEARTH
    domain master = yes
    domain logons = yes

    +In the event that the NT4 PDC should need to be taken out of service, or if it dies, +one of the NT4 BDCs can be promoted to a PDC. If this happens while the original NT4 PDC is on +line, it is automatically demoted to an NT4 BDC. This is an important aspect of Domain +Controller management. The tool that is used to effect a promotion or a demotion is the +Server Manager for Domains. It should be noted that Samba-3 BDCs can not be promoted +in this manner because reconfiguration of Samba requires changes to the smb.conf file. +

    Example PDC Configuration

    +Beginning with Version 2.2, Samba officially supports domain logons for all current Windows clients, +including Windows NT4, 2003 and XP Professional. For Samba to be enabled as a PDC, some +parameters in the [global]-section of the smb.conf have to be set. +Refer to for an example of the minimum required settings. +

    Example 6.1. Minimal smb.conf for a PDC in Use With a BDC LDAP Server on PDC.

    workgroup = MIDEARTH
    passdb backend = ldapsam://localhost:389
    domain master = yes
    domain logons = yes

    Several other things like a [homes] and a [netlogon] share also need to be set along with -settings for the profile path, the users home drive, etc.. This will not be covered in this -chapter, for more information please refer to the chapter about samba as a PDC. -

    Active Directory Domain Control

    +settings for the profile path, the user's home drive, and so on. This is not covered in this +chapter; for more information please refer to . +

    LDAP Configuration Notes

    +When configuring a master and a slave LDAP server, it is advisable to use the master LDAP server +for the PDC and slave LDAP servers for the BDCs. It is not essential to use slave LDAP servers, however, +many administrators will want to do so in order to provide redundant services. Of course, one or more BDCs +may use any slave LDAP server. Then again, it is entirely possible to use a single LDAP server for the +entire network. +

    +When configuring a master LDAP server that will have slave LDAP servers, do not forget to configure +this in the /etc/openldap/slapd.conf file. It must be noted that the DN of a +server certificate must use the CN attribute to name the server, and the CN must carry the servers' +fully qualified domain name. Additional alias names and wildcards may be present in the +subjectAltName certificate extension. More details on server certificate names are in RFC2830. +

    +It does not really fit within the scope of this document, but a working LDAP installation is +basic to LDAP enabled Samba operation. When using an OpenLdap server with Transport Layer Security +(TLS), the machine name in /etc/ssl/certs/slapd.pem must be the +same as in /etc/openldap/sldap.conf. The Red Hat Linux startup script +creates the slapd.pem file with hostname “localhost.localdomain.” +It is impossible to access this LDAP server from a slave LDAP server (i.e., a Samba BDC) unless the +certificate is recreated with a correct hostname. +

    +Do not install a Samba PDC on a OpenLDAP slave server. Joining client machines to the domain +will fail in this configuration because the change to the machine account in the LDAP tree +must take place on the master LDAP server. This is not replicated rapidly enough to the slave +server that the PDC queries. It therfore gives an error message on the client machine about +not being able to set up account credentials. The machine account is created on the LDAP server +but the password fields will be empty. +

    +Possible PDC/BDC plus LDAP configurations include: +

    • + PDC+BDC -> One Central LDAP Server. +

    • + PDC -> LDAP master server, BDC -> LDAP slave server. +

    • + PDC -> LDAP master, with secondary slave LDAP server. +

      + BDC -> LDAP master, with secondary slave LDAP server. +

    • + PDC -> LDAP master, with secondary slave LDAP server. +

      + BDC -> LDAP slave server, with secondary master LDAP server. +

    +In order to have a fall-back configuration (secondary) LDAP server one would specify +the secondary LDAP server in the smb.conf file as shown in . +

    +

    Example 6.2. Multiple LDAP Servers in smb.conf

    ...
    passdb backend = ldapsam:ldap://master.quenya.org
    ldapsam:ldap://slave.quenya.org
    ...

    +

    Active Directory Domain Control

    As of the release of MS Windows 2000 and Active Directory, this information is now stored in a directory that can be replicated and for which partial or full administrative control -can be delegated. Samba-3 is NOT able to be a Domain Controller within an Active Directory -tree, and it can not be an Active Directory server. This means that Samba-3 also can NOT +can be delegated. Samba-3 is not able to be a Domain Controller within an Active Directory +tree, and it cannot be an Active Directory server. This means that Samba-3 also cannot act as a Backup Domain Controller to an Active Directory Domain Controller. -

    What qualifies a Domain Controller on the network?

    -Every machine that is a Domain Controller for the domain SAMBA has to register the NetBIOS -group name SAMBA<#1c> with the WINS server and/or by broadcast on the local network. -The PDC also registers the unique NetBIOS name SAMBA<#1b> with the WINS server. +

    What Qualifies a Domain Controller on the Network?

    +Every machine that is a Domain Controller for the domain MIDEARTH has to register the NetBIOS +group name MIDEARTH<#1c> with the WINS server and/or by broadcast on the local network. +The PDC also registers the unique NetBIOS name MIDEARTH<#1b> with the WINS server. The name type <#1b> name is normally reserved for the Domain Master Browser, a role that has nothing to do with anything related to authentication, but the Microsoft Domain -implementation requires the domain master browser to be on the same machine as the PDC. -

    How does a Workstation find its domain controller?

    -An MS Windows NT4 / 200x / XP Professional workstation in the domain SAMBA that wants a -local user to be authenticated has to find the domain controller for SAMBA. It does this -by doing a NetBIOS name query for the group name SAMBA<#1c>. It assumes that each -of the machines it gets back from the queries is a domain controller and can answer logon -requests. To not open security holes both the workstation and the selected domain controller +implementation requires the Domain Master Browser to be on the same machine as the PDC. +

    +Where a WINS server is not used, broadcast name registrations alone must suffice. Refer to + for more information regarding TCP/IP network protocols and how + SMB/CIFS names are handled. +

    How does a Workstation find its Domain Controller?

    +There are two different mechanisms to locate a domain controller, one method is used when +NetBIOS over TCP/IP is enabled and the other when it has been disabled in the TCP/IP +network configuration. +

    +Where NetBIOS over TCP/IP is disabled, all name resolution involves the use of DNS, broadcast +messaging over UDP, as well as Active Directory communication technologies. In this type of +environment all machines require appropriate DNS entries. More information may be found in +. +

    NetBIOS Over TCP/IP Enabled

    +An MS Windows NT4/200x/XP Professional workstation in the domain MIDEARTH that wants a +local user to be authenticated has to find the Domain Controller for MIDEARTH. It does this +by doing a NetBIOS name query for the group name MIDEARTH<#1c>. It assumes that each +of the machines it gets back from the queries is a Domain Controller and can answer logon +requests. To not open security holes, both the workstation and the selected Domain Controller authenticate each other. After that the workstation sends the user's credentials (name and -password) to the local Domain Controller, for validation. -

    Backup Domain Controller Configuration

    -Several things have to be done: +password) to the local Domain Controller for validation. +

    NetBIOS Over TCP/IP Disabled

    +An MS Windows NT4/200x/XP Professional workstation in the realm quenya.org +that has a need to affect user logon authentication will locate the Domain Controller by +requerying DNS servers for the _ldap._tcp.pdc.ms-dcs.quenya.org record. +More information regarding this subject may be found in . +

    Backup Domain Controller Configuration

    +The creation of a BDC requires some steps to prepare the Samba server before +smbd is executed for the first time. These steps are outlines as follows: +

    • - The domain SID has to be the same on the PDC and the BDC. This used to - be stored in the file private/MACHINE.SID. This file is not created - since Samba 2.2.5. Nowadays the domain SID is stored in the file - private/secrets.tdb. Simply copying the secrets.tdb - from the PDC to the BDC does not work, as the BDC would - generate a new SID for itself and override the domain SID with this - new BDC SID.

      + The domain SID has to be the same on the PDC and the BDC. In Samba versions + pre-2.2.5, the domain SID was stored in the file private/MACHINE.SID. + The domain SID is now stored in the file private/secrets.tdb. This file + is unique to each server and can not be copied from a PDC to a BDC, the BDC will generate + a new SID at start-up. It will over-write the PDC domain SID with the newly created BDC SID. + There is a procedure that will allow the BDC to aquire the Domain SID. This is described here. +

      To retrieve the domain SID from the PDC or an existing BDC and store it in the - secrets.tdb, execute: + secrets.tdb, execute:

       root# net rpc getsid
       
    • + Specification of the ldap admin dn is obligatory. + This also requires the LDAP administration password to be set in the secrets.tdb + using the smbpasswd -w mysecret. +

    • + Either ldap suffix or + ldap idmap suffix must be specified in + the smb.conf file. +

    • + The UNIX user database has to be synchronized from the PDC to the - BDC. This means that both the /etc/passwd and /etc/group have to be - replicated from the PDC to the BDC. This can be done manually - whenever changes are made, or the PDC is set up as a NIS master - server and the BDC as a NIS slave server. To set up the BDC as a - mere NIS client would not be enough, as the BDC would not be able to - access its user database in case of a PDC failure. NIS is by no means - the only method to synchronize passwords. An LDAP solution would work - as well. + BDC. This means that both the /etc/passwd and + /etc/group have to be replicated from the PDC + to the BDC. This can be done manually whenever changes are made. + Alternately, the PDC is set up as an NIS master server and the BDC as an NIS slave + server. To set up the BDC as a mere NIS client would not be enough, + as the BDC would not be able to access its user database in case of + a PDC failure. NIS is by no means the only method to synchronize + passwords. An LDAP solution would also work.

    • - The Samba password database has to be replicated from the PDC to the BDC. - As said above, though possible to synchronise the smbpasswd - file with rsync and ssh, this method is broken and flawed, and is - therefore not recommended. A better solution is to set up slave LDAP - servers for each BDC and a master LDAP server for the PDC. + The Samba password database must be replicated from the PDC to the BDC. + Although it is possible to synchronize the smbpasswd + file with rsync and ssh, this method + is broken and flawed, and is therefore not recommended. A better solution + is to set up slave LDAP servers for each BDC and a master LDAP server for the PDC.

    • - Any netlogon share has to be replicated from the PDC to the + The netlogon share has to be replicated from the PDC to the BDC. This can be done manually whenever login scripts are changed, - or it can be done automatically together with the smbpasswd - synchronization. -

    Example Configuration

    -Finally, the BDC has to be found by the workstations. This can be done by setting: -

    Example 6.2. Minimal setup for being a BDC

    workgroup = MIDEARTH
    domain master = no
    domain logons = yes
    idmap backend = ldapsam://slave-ldap.quenya.org

    + or it can be done automatically using a cron job + that will replicate the directory structure in this share using a tool + like rsync. +

    Example Configuration

    +Finally, the BDC has to be found by the workstations. This can be done by setting Samba as shown in . +

    Example 6.3. Minimal setup for being a BDC

    workgroup = MIDEARTH
    passdb backend = ldapsam:ldap://slave-ldap.quenya.org
    domain master = no
    domain logons = yes
    idmap backend = ldapsam:ldap://slave-ldap.quenya.org

    In the [global]-section of the smb.conf of the BDC. This makes the BDC only register the name SAMBA<#1c> with the WINS server. This is no problem as the name SAMBA<#1c> is a NetBIOS group name that is meant to be registered by more than one machine. The parameter -domain master = no +domain master = no forces the BDC not to register SAMBA<#1b> which as a unique NetBIOS name is reserved for the Primary Domain Controller.

    + + The idmap backend will redirect the winbindd utility to use the LDAP database to resolve all UIDs and GIDs for UNIX accounts.

    Note

    + Samba-3 has introduced a new ID mapping facility. One of the features of this facility is that it -allows greater flexibility in how user and group IDs are handled in respect of NT Domain User and Group -SIDs. One of the new facilities provides for explicitly ensuring that UNIX / Linux UID and GID values +allows greater flexibility in how user and group IDs are handled in respect to NT Domain User and Group +SIDs. One of the new facilities provides for explicitly ensuring that UNIX/Linux UID and GID values will be consistent on the PDC, all BDCs and all Domain Member servers. The parameter that controls this is called idmap backend. Please refer to the man page for smb.conf for more information -regarding it's behaviour. Do NOT set this parameter except where an LDAP backend (ldapsam) is in use. -

    Common Errors

    -As this is a rather new area for Samba there are not many examples that we may refer to. Keep -watching for updates to this section. -

    Machine Accounts keep expiring, what can I do?

    -This problem will occur when occur when the passdb (SAM) files are copied from a central -server but the local Backup Domain Controllers. Local machine trust account password updates +regarding its behavior. +

    +The use of the idmap backend = ldap://master.quenya/org +option on a BDC only make sense where ldapsam is used on a PDC. The purpose for an LDAP based idmap backend is +also to allow a domain-member (without its own passdb backend) to use winbindd to resolve Windows network users +and groups to common UID/GIDs. In other words, this option is generally intended for use on BDCs and on Domain +Member servers. +

    Common Errors

    +As this is a rather new area for Samba, there are not many examples that we may refer to. +Updates will be published as they become available and may be found in later Samba releases or +from the Samba web site. +

    Machine Accounts Keep Expiring

    + +This problem will occur when the passdb (SAM) files are copied from a central +server but the local Backup Domain Controller is acting as a PDC. This results in the application of +Local Machine Trust Account password updates to the local SAM. Such updates are not copied back to the central server. The newer machine account password is then over -written when the SAM is copied from the PDC. The result is that the Domain member machine -on start up will find that it's passwords does not match the one now in the database and +written when the SAM is re-copied from the PDC. The result is that the Domain Member machine +on start up will find that its passwords do not match the one now in the database and since the startup security check will now fail, this machine will not allow logon attempts to proceed and the account expiry error will be reported.

    -The solution: use a more robust passdb backend, such as the ldapsam backend, setting up -an slave LDAP server for each BDC, and a master LDAP server for the PDC. -

    Can Samba be a Backup Domain Controller to an NT4 PDC?

    -With version 2.2, no. The native NT4 SAM replication protocols have not yet been fully -implemented. The Samba Team is working on understanding and implementing the protocols, -but this work has not been finished for Samba-3. +The solution is to use a more robust passdb backend, such as the ldapsam backend, setting up +a slave LDAP server for each BDC, and a master LDAP server for the PDC. +

    Can Samba Be a Backup Domain Controller to an NT4 PDC?

    + +No. The native NT4 SAM replication protocols have not yet been fully implemented.

    -Can I get the benefits of a BDC with Samba? Yes, but only to a Samba PDC. The main reason for implementing a -BDC is availability. If the PDC is a Samba machine, a second Samba machine can be set up to -service logon requests whenever the PDC is down. -

    How do I replicate the smbpasswd file?

    +Can I get the benefits of a BDC with Samba? Yes, but only to a Samba PDC.The +main reason for implementing a BDC is availability. If the PDC is a Samba +machine, a second Samba machine can be set up to service logon requests whenever +the PDC is down. +

    How Do I Replicate the smbpasswd File?

    + Replication of the smbpasswd file is sensitive. It has to be done whenever changes to the SAM are made. Every user's password change is done in the smbpasswd file and has to be replicated to the BDC. So replicating the smbpasswd file very often is necessary. @@ -246,15 +342,15 @@ has to be replicated to the BDC. So replicating the smbpasswd file very often is As the smbpasswd file contains plain text password equivalents, it must not be sent unencrypted over the wire. The best way to set up smbpasswd replication from the PDC to the BDC is to use the utility rsync. rsync can use ssh as a transport. -Ssh itself can be set up to accept only rsync transfer without requiring the user -to type a password. +ssh itself can be set up to accept only +rsync transfer without requiring the user to type a password.

    As said a few times before, use of this method is broken and flawed. Machine trust -accounts will go out of sync, resulting in a very broken domain. This method is +accounts will go out of sync, resulting in a broken domain. This method is not recommended. Try using LDAP instead. -

    Can I do this all with LDAP?

    -The simple answer is YES. Samba's pdb_ldap code supports binding to a replica +

    Can I Do This All with LDAP?

    +The simple answer is yes. Samba's pdb_ldap code supports binding to a replica LDAP server, and will also follow referrals and rebind to the master if it ever needs to make a modification to the database. (Normally BDCs are read only, so this will not occur often). -

    +

    diff --git a/docs/htmldocs/samba-pdc.html b/docs/htmldocs/samba-pdc.html index aab2d4207c..37c513efff 100644 --- a/docs/htmldocs/samba-pdc.html +++ b/docs/htmldocs/samba-pdc.html @@ -1,261 +1,276 @@ -Chapter 5. Domain Control

    Chapter 5. Domain Control

    John H. Terpstra

    Samba Team

    Gerald (Jerry) Carter

    Samba Team

    David Bannon

    Samba Team

    The Essence of Learning:  +Chapter 5. Domain Control

    Chapter 5. Domain Control

    John H. Terpstra

    Samba Team

    Gerald (Jerry) Carter

    Samba Team

    David Bannon

    Samba Team

    Guenther Deschner

    LDAP updates

    There are many who approach MS Windows networking with incredible misconceptions. -That's OK, because it gives the rest of us plenty of opportunity to be of assistance. +That's okay, because it gives the rest of us plenty of opportunity to be of assistance. Those who really want help would be well advised to become familiar with information that is already available.

    -The reader is advised NOT to tackle this section without having first understood +The reader is advised not to tackle this section without having first understood and mastered some basics. MS Windows networking is not particularly forgiving of misconfiguration. Users of MS Windows networking are likely to complain of persistent niggles that may be caused by a broken network configuration. -To a great many people however, MS Windows networking starts with a domain controller -that in some magical way is expected to solve all ills. -

    Figure 5.1. An Example Domain

    An Example Domain

    +To a great many people, however, MS Windows networking starts with a Domain Controller +that in some magical way is expected to solve all network operational ills. +

    +The diagram in shows a typical MS Windows Domain Security +network environment. Workstations A, B and C are representative of many physical MS Windows +network clients. +

    Figure 5.1. An Example Domain.

    An Example Domain.

    From the Samba mailing list one can readily identify many common networking issues. If you are not clear on the following subjects, then it will do much good to read the sections of this HOWTO that deal with it. These are the most common causes of MS Windows networking problems: -

    • Basic TCP/IP configuration

    • NetBIOS name resolution

    • Authentication configuration

    • User and Group configuration

    • Basic File and Directory Permission Control in UNIX/Linux

    • Understanding of how MS Windows clients interoperate in a network - environment

    +

    • Basic TCP/IP configuration.

    • NetBIOS name resolution.

    • Authentication configuration.

    • User and group configuration.

    • Basic file and directory permission control in UNIX/Linux.

    • Understanding how MS Windows clients interoperate in a network + environment.

    Do not be put off; on the surface of it MS Windows networking seems so simple that anyone can do it. In fact, it is not a good idea to set up an MS Windows network with inadequate training and preparation. But let's get our first indelible principle out of the -way: It is perfectly OK to make mistakes! In the right place and at -the right time, mistakes are the essence of learning. It is very much -not ok to make mistakes that cause loss of productivity and impose an avoidable financial -burden on an organisation. +way: It is perfectly okay to make mistakes! In the right place and at +the right time, mistakes are the essence of learning. It is very much not okay to make +mistakes that cause loss of productivity and impose an avoidable financial burden on an +organization.

    -Where is the right place to make mistakes? Only out of harm's way! If you are going to -make mistakes, then please do this on a test network, away from users and in such a way as +Where is the right place to make mistakes? Only out of harm's way. If you are going to +make mistakes, then please do it on a test network, away from users and in such a way as to not inflict pain on others. Do your learning on a test network. -

    Features and Benefits

    -What is the key benefit of Microsoft Domain security? +

    Features and Benefits

    + +What is the key benefit of Microsoft Domain Security?

    -In a word, Single Sign On, or SSO for short. To many, this is the holy -grail of MS Windows NT and beyond networking. SSO allows users in a well designed network +In a word, Single Sign On, or SSO for short. To many, this is the Holy +Grail of MS Windows NT and beyond networking. SSO allows users in a well-designed network to log onto any workstation that is a member of the domain that their user account is in (or in a domain that has an appropriate trust relationship with the domain they are visiting) -and they will be able to log onto the network and access resources (shares, files, and printers) +and they will be able to log onto the network and access resources (shares, files and printers) as if they are sitting at their home (personal) workstation. This is a feature of the Domain -security protocols. +Security protocols.

    -The benefits of Domain security are available to those sites that deploy a Samba PDC. + +The benefits of Domain Security are available to those sites that deploy a Samba PDC. A Domain provides a unique network security identifier (SID). Domain user and group security identifiers are comprised of the network SID plus a relative identifier (RID) that is unique to the account. User and Group SIDs (the network SID plus the RID) can be used to create Access Control Lists (ACLs) attached to network resources to provide organizational access control. UNIX systems -know only of local security identifiers. +recognize only local security identifiers.

    Note

    -Network clients of an MS Windows Domain security environment must be Domain members to be -able to gain access to the advanced features provided. Domain membership involves more than just +Network clients of an MS Windows Domain Security Environment must be Domain Members to be +able to gain access to the advanced features provided. Domain Membership involves more than just setting the workgroup name to the Domain name. It requires the creation of a Domain trust account -for the workstation (called a machine account). Please refer to the chapter on -setting up samba as a domain member for more information. +for the workstation (called a machine account). Refer to +for more information.

    The following functionalities are new to the Samba-3 release:

    • - Windows NT4 domain trusts + Windows NT4 domain trusts.

    • + Adding users via the User Manager for Domains. This can be done on any MS Windows - client using the Nexus toolkit that is available from Microsoft's web site. + client using the Nexus.exe toolkit that is available from Microsoft's Web site. Samba-3 supports the use of the Microsoft Management Console for user management.

    • Introduces replaceable and multiple user account (authentication) - back ends. In the case where the back end is placed in an LDAP database, - Samba-3 confers the benefits of a back end that can be distributed, replicated, + backends. In the case where the backend is placed in an LDAP database, + Samba-3 confers the benefits of a backend that can be distributed, replicated and is highly scalable.

    • - Implements full Unicode support. This simplifies cross locale internationalisation + Implements full Unicode support. This simplifies cross locale internationalization support. It also opens up the use of protocols that Samba-2.2.x had but could not use due to the need to fully support Unicode.

    -The following functionalities are NOT provided by Samba-3: +The following functionalities are not provided by Samba-3:

    • + + SAM replication with Windows NT4 Domain Controllers - (i.e. a Samba PDC and a Windows NT BDC or vice versa). This means samba + (i.e., a Samba PDC and a Windows NT BDC or vice versa). This means Samba cannot operate as a BDC when the PDC is Microsoft-based or - replicate account data to Windows-BDC's. + replicate account data to Windows BDCs.

    • - Acting as a Windows 2000 Domain Controller (i.e. Kerberos and - Active Directory) - In point of fact, Samba-3 DOES have some + Acting as a Windows 2000 Domain Controller (i.e., Kerberos and + Active Directory). In point of fact, Samba-3 does have some Active Directory Domain Control ability that is at this time - purely experimental AND that is certain - to change as it becomes a fully supported feature some time - during the Samba-3 (or later) life cycle. However, Active Directory is - more then just SMB - it's also LDAP, Kerberos, DHCP and other protocols - (with proprietary extensions, of course). + purely experimental that is certain to change as it becomes a + fully supported feature some time during the Samba-3 (or later) + life cycle. However, Active Directory is more then just SMB + it's also LDAP, Kerberos, DHCP, and other protocols (with proprietary + extensions, of course). +

    • + The Windows 200x/XP MMC (Computer Management) Console can not be used + to manage a Samba-3 server. For this you can use only the MS Windows NT4 + Domain Server manager and the MS Windows NT4 Domain User Manager. Both are + part of the SVRTOOLS.EXE package mentioned later.

    -Windows 9x / Me / XP Home clients are not true members of a domain for reasons outlined -in this chapter. The protocol for support of Windows 9x / Me style network (domain) logons -is completely different from NT4 / Win2k type domain logons and has been officially supported +Windows 9x/Me/XP Home clients are not true members of a domain for reasons outlined +in this chapter. The protocol for support of Windows 9x/Me style network (domain) logons +is completely different from NT4/Windows 200x type domain logons and has been officially supported for some time. These clients use the old LanMan Network Logon facilities that are supported in Samba since approximately the Samba-1.9.15 series.

    -Samba-3 has an implementation of group mapping between Windows NT groups +Samba-3 implements group mapping between Windows NT groups and UNIX groups (this is really quite complicated to explain in a short space). This is -discussed more fully in the chapter on group mapping. +discussed more fully in .

    + Samba-3, like an MS Windows NT4 PDC or a Windows 200x Active Directory, needs to store -user and machine trust account information in a suitable backend data store. -Refer to the section on machine trust accounts. With Samba-3 there can be multiple -back-ends for this. A complete discussion of account database backends can be found in -the chapter on Account Information Databases. -

    Basics of Domain Control

    +user and Machine Trust Account information in a suitable backend datastore. +Refer to . With Samba-3 there can be multiple +backends for this. A complete discussion of account database backends can be found in +. +

    Basics of Domain Control

    Over the years, public perceptions of what Domain Control really is has taken on an almost mystical nature. Before we branch into a brief overview of Domain Control, -there are three basic types of domain controllers: -

    Domain Controller Types

    • Primary Domain Controller

    • Backup Domain Controller

    • ADS Domain Controller

    -The Primary Domain Controller or PDC plays an important role in the MS -Windows NT4. In Windows 200x Domain Control architecture this role is held by domain controllers. -There is folk lore that dictates that because of it's role in the MS Windows -network, the domain controllers should be the most powerful and most capable machine in the network. -As strange as it may seem to say this here, good over all network performance dictates that -the entire infrastructure needs to be balanced. It is advisable to invest more in Stand-Alone -(or Domain Member) servers than in the domain controllers. -

    -In the case of MS Windows NT4 style domains, it is the PDC that initiates a new Domain Control database. -This forms a part of the Windows registry called the SAM (Security Account Manager). It plays a key -part in NT4 type domain user authentication and in synchronisation of the domain authentication +there are three basic types of Domain Controllers. +

    Domain Controller Types

    • Primary Domain Controller

    • Backup Domain Controller

    • ADS Domain Controller

    +The Primary Domain Controller or PDC plays an important role in MS +Windows NT4. In Windows 200x Domain Control architecture, this role is held by Domain Controllers. +Folklore dictates that because of its role in the MS Windows +network, the Domain Controller should be the most powerful and most capable machine in the network. +As strange as it may seem to say this here, good overall network performance dictates that +the entire infrastructure needs to be balanced. It is advisable to invest more in Stand-alone +(Domain Member) servers than in the Domain Controllers. +

    + +In the case of MS Windows NT4-style domains, it is the PDC that initiates a new Domain Control database. +This forms a part of the Windows registry called the Security Account Manager (SAM). It plays a key +part in NT4-type domain user authentication and in synchronization of the domain authentication database with Backup Domain Controllers.

    -With MS Windows 200x Server based Active Directory domains, one domain controller initiates a potential -hierarchy of domain controllers, each with their own area of delegated control. The master domain -controller has the ability to override any down-stream controller, but a down-line controller has -control only over it's down-line. With Samba-3 this functionality can be implemented using an -LDAP based user and machine account back end. +With MS Windows 200x Server-based Active Directory domains, one Domain Controller initiates a potential +hierarchy of Domain Controllers, each with their own area of delegated control. The master domain +controller has the ability to override any downstream controller, but a downline controller has +control only over its downline. With Samba-3, this functionality can be implemented using an +LDAP-based user and machine account backend.

    -New to Samba-3 is the ability to use a back-end database that holds the same type of data as -the NT4 style SAM (Security Account Manager) database (one of the registry files). -[1] +New to Samba-3 is the ability to use a backend database that holds the same type of data as +the NT4-style SAM database (one of the registry files)[1].

    The Backup Domain Controller or BDC plays a key role in servicing network authentication requests. The BDC is biased to answer logon requests in preference to the PDC. -On a network segment that has a BDC and a PDC the BDC will be most likely to service network +On a network segment that has a BDC and a PDC, the BDC will most likely service network logon requests. The PDC will answer network logon requests when the BDC is too busy (high load). -A BDC can be promoted to a PDC. If the PDC is on line at the time that a BDC is promoted to -PDC, the previous PDC is automatically demoted to a BDC. With Samba-3 this is NOT an automatic -operation; the PDC and BDC must be manually configured and changes need to be made likewise. +A BDC can be promoted to a PDC. If the PDC is online at the time that a BDC is promoted to +PDC, the previous PDC is automatically demoted to a BDC. With Samba-3, this is not an automatic +operation; the PDC and BDC must be manually configured and changes also need to be made.

    -With MS Windows NT4, it is an install time decision what type of machine the server will be. -It is possible to change the promote a BDC to a PDC and vice versa only, but the only way -to convert a domain controller to a domain member server or a stand-alone server is to +With MS Windows NT4, a decision is made at installation to determine what type of machine the server will be. +It is possible to promote a BDC to a PDC and vice versa. The only way +to convert a Domain Controller to a Domain Member server or a Stand-alone Server is to reinstall it. The install time choices offered are: -

    • Primary Domain Controller - The one that seeds the domain SAM

    • Backup Domain Controller - One that obtains a copy of the domain SAM

    • Domain Member Server - One that has NO copy of the domain SAM, rather it obtains authentication from a Domain Controller for all access controls.

    • Stand-Alone Server - One that plays NO part is SAM synchronisation, has it's own authentication database and plays no role in Domain security.

    -With MS Windows 2000 the configuration of domain control is done after the server has been +

    • Primary Domain Controller the one that seeds the domain SAM.

    • Backup Domain Controller one that obtains a copy of the domain SAM.

    • Domain Member Server one that has no copy of the domain SAM, rather it obtains authentication from a Domain Controller for all access controls.

    • Stand-alone Server one that plays no part is SAM synchronization, has its own authentication database and plays no role in Domain Security.

    +With MS Windows 2000, the configuration of Domain Control is done after the server has been installed. Samba-3 is capable of acting fully as a native member of a Windows 200x server Active Directory domain.

    -New to Samba-3 is the ability to function fully as an MS Windows NT4 style Domain Controller, -excluding the SAM replication components. However, please be aware that Samba-3 support the -MS Windows 200x domain control protocols also. + +New to Samba-3 is the ability to function fully as an MS Windows NT4-style Domain Controller, +excluding the SAM replication components. However, please be aware that Samba-3 also supports the +MS Windows 200x Domain Control protocols.

    At this time any appearance that Samba-3 is capable of acting as an Domain Controller in native ADS mode is limited and experimental in nature. -This functionality should not be used until the Samba-Team offers formal support for it. +This functionality should not be used until the Samba Team offers formal support for it. At such a time, the documentation will be revised to duly reflect all configuration and management requirements. Samba can act as a NT4-style DC in a Windows 2000/XP environment. However, there are certain compromises: -

    • No machine policy files

    • No Group Policy Objects

    • No synchronously executed AD logon scripts

    • Can't use ANY Active Directory management tools to manage users and machines

    • Registry changes tattoo the main registry, while with AD they do NOT. ie: Leave permanent changes in effect

    • Without AD you can not peprform the function of exporting specific applications to specific users or groups

    -

    Preparing for Domain Control

    -There are two ways that MS Windows machines may interact with each other, with other servers, -and with Domain Controllers: Either as Stand-Alone systems, more commonly +

    • No machine policy files.
    • No Group Policy Objects.
    • No synchronously executed AD logon scripts.
    • Can't use Active Directory management tools to manage users and machines.
    • Registry changes tattoo the main registry, while with AD they do not leave permanent changes in effect.
    • Without AD you cannot perform the function of exporting specific applications to specific users or groups.

    +

    Preparing for Domain Control

    +There are two ways that MS Windows machines may interact with each other, with other servers +and with Domain Controllers: either as Stand-alone systems, more commonly called Workgroup members, or as full participants in a security system, more commonly called Domain members.

    -It should be noted that Workgroup membership involve no special configuration -other than the machine being configured so that the network configuration has a commonly used name -for it's workgroup entry. It is not uncommon for the name WORKGROUP to be used for this. With this -mode of configuration there are NO machine trust accounts and any concept of membership as such -is limited to the fact that all machines appear in the network neighbourhood to be logically -grouped together. Again, just to be clear: workgroup mode does not involve any security machine +It should be noted that Workgroup membership involves no special configuration +other than the machine being configured so the network configuration has a commonly used name +for its workgroup entry. It is not uncommon for the name WORKGROUP to be used for this. With this +mode of configurationi, there are no Machine Trust Accounts and any concept of membership as such +is limited to the fact that all machines appear in the network neighborhood to be logically +grouped together. Again, just to be clear: workgroup mode does not involve security machine accounts.

    -Domain member machines have a machine account in the Domain accounts database. A special procedure -must be followed on each machine to affect Domain membership. This procedure, which can be done -only by the local machine Administrator account, will create the Domain machine account (if -if does not exist), and then initializes that account. When the client first logs onto the +Domain Member machines have a machine account in the Domain accounts database. A special procedure +must be followed on each machine to effect Domain Membership. This procedure, which can be done +only by the local machine Administrator account, will create the Domain machine account (if it does +not exist), and then initializes that account. When the client first logs onto the Domain it triggers a machine password change.

    Note

    -When running a Domain all MS Windows NT / 200x / XP Professional clients should be configured -as full Domain Members - IF A SECURE NETWORK IS WANTED. If the machine is NOT made a member of the -Domain, then it will operate like a workgroup (stand-alone) machine. Please refer to -the chapter on domain membership for information regarding HOW to make your MS Windows clients Domain members. +When Samba is configured as a Domain Controller, secure network operation demands that +all MS Windows NT4/200x/XP Professional clients should be configured as Domain Members. +If a machine is not made a member of the Domain, then it will operate like a workgroup +(Stand-alone) machine. Please refer to for +information regarding Domain Membership.

    -The following are necessary for configuring Samba-3 as an MS Windows NT4 style PDC for MS Windows -NT4 / 200x / XP clients. -

    • Configuration of basic TCP/IP and MS Windows Networking

    • Correct designation of the Server Role (security = user)

    • Consistent configuration of Name Resolution (See chapter on Network Browsing and on - Integrating Unix into Windows networks)

    • Domain logons for Windows NT4 / 200x / XP Professional clients

    • Configuration of Roaming Profiles or explicit configuration to force local profile usage

    • Configuration of Network/System Policies

    • Adding and managing domain user accounts

    • Configuring MS Windows client machines to become domain members

    -The following provisions are required to serve MS Windows 9x / Me Clients: -

    • Configuration of basic TCP/IP and MS Windows Networking

    • Correct designation of the Server Role (security = user)

    • Network Logon Configuration (Since Windows 9x / XP Home are not technically domain - members, they do not really participate in the security aspects of Domain logons as such)

    • Roaming Profile Configuration

    • Configuration of System Policy handling

    • Installation of the Network driver "Client for MS Windows Networks" and configuration - to log onto the domain

    • Placing Windows 9x / Me clients in user level security - if it is desired to allow - all client share access to be controlled according to domain user / group identities.

    • Adding and managing domain user accounts

    Note

    +The following are necessary for configuring Samba-3 as an MS Windows NT4-style PDC for MS Windows +NT4/200x/XP clients: +

    • Configuration of basic TCP/IP and MS Windows networking.

    • Correct designation of the Server Role (security = user).

    • Consistent configuration of Name Resolution[2].

    • Domain logons for Windows NT4/200x/XP Professional clients.

    • Configuration of Roaming Profiles or explicit configuration to force local profile usage.

    • Configuration of network/system policies.

    • Adding and managing domain user accounts.

    • Configuring MS Windows client machines to become Domain Members.

    +The following provisions are required to serve MS Windows 9x/Me clients: +

    • Configuration of basic TCP/IP and MS Windows networking.

    • Correct designation of the server role (security = user).

    • Network Logon Configuration (since Windows 9x/Me/XP Home are not technically domain + members, they do not really participate in the security aspects of Domain logons as such).

    • Roaming Profile Configuration.

    • Configuration of System Policy handling.

    • Installation of the network driver “Client for MS Windows Networks” and configuration + to log onto the domain.

    • Placing Windows 9x/Me clients in User Level Security if it is desired to allow + all client share access to be controlled according to domain user/group identities.

    • Adding and managing domain user accounts.

    Note

    Roaming Profiles and System/Network policies are advanced network administration topics -that are covered in the Profile Management and -Policy Management chapters of this document. However, these are not +that are covered in the and + chapters of this document. However, these are not necessarily specific to a Samba PDC as much as they are related to Windows NT networking concepts.

    A Domain Controller is an SMB/CIFS server that:

    • Registers and advertises itself as a Domain Controller (through NetBIOS broadcasts as well as by way of name registrations either by Mailslot Broadcasts over UDP broadcast, - to a WINS server over UDP unicast, or via DNS and Active Directory) + to a WINS server over UDP unicast, or via DNS and Active Directory).

    • - Provides the NETLOGON service (actually a collection of services that runs over - a number of protocols. These include the LanMan Logon service, the Netlogon service, - the Local Security Account service, and variations of them) + Provides the NETLOGON service. (This is actually a collection of services that runs over + mulitple protocols. These include the LanMan Logon service, the Netlogon service, + the Local Security Account service, and variations of them.)

    • - Provides a share called NETLOGON + Provides a share called NETLOGON.

    -For Samba to provide these is rather easy to configure. Each Samba Domain Controller must provide -the NETLOGON service which Samba calls the domain logons functionality -(after the name of the parameter in the smb.conf file). Additionally, one (1) server in a Samba-3 -Domain must advertise itself as the domain master browser[2]. This causes the Primary Domain Controller -to claim domain specific NetBIOS name that identifies it as a domain master browser for its given -domain/workgroup. Local master browsers in the same domain/workgroup on broadcast-isolated subnets -then ask for a complete copy of the browse list for the whole wide area network. Browser clients -will then contact their local master browser, and will receive the domain-wide browse list, +It is rather easy to configure Samba to provide these. Each Samba Domain Controller must provide +the NETLOGON service that Samba calls the domain logons functionality +(after the name of the parameter in the smb.conf file). Additionally, one server in a Samba-3 +Domain must advertise itself as the Domain Master Browser[3]. +This causes the Primary Domain Controller to claim a domain-specific NetBIOS name that identifies it as a +Domain Master Browser for its given domain or workgroup. Local master browsers in the same domain or workgroup on +broadcast-isolated subnets then ask for a complete copy of the browse list for the whole wide area network. +Browser clients will then contact their Local Master Browser, and will receive the domain-wide browse list, instead of just the list for their broadcast-isolated subnet. -

    Domain Control - Example Configuration

    +

    Domain Control Example Configuration

    The first step in creating a working Samba PDC is to understand the parameters necessary -in smb.conf. An example smb.conf for acting as a PDC can be found in the example -for being a PDC. +in smb.conf. An example smb.conf for acting as a PDC can be found in .

    -

    Example 5.1. smb.conf for being a PDC

    [global]
    netbios name = BELERIAND
    workgroup = MIDEARTH
    passdb backend = ldapsam, guest
    os level = 33
    preferred master = yes
    domain master = yes
    local master = yes
    security = user
    encrypt passwords = yes
    domain logons = yes
    logon path = \\%N\profiles\%u
    logon drive = H:
    logon home = \\homeserver\%u\winprofile
    logon script = logon.cmd
    [netlogon]
    path = /var/lib/samba/netlogon
    read only = yes
    write list = ntadmin
    [profiles]
    path = /var/lib/samba/profiles
    read only = no
    create mask = 0600
    directory mask = 0700

    +

    Example 5.1. smb.conf for being a PDC

    [global]
    netbios name = BELERIAND
    workgroup = MIDEARTH
    passdb backend = tdbsam
    os level = 33
    preferred master = yes
    domain master = yes
    local master = yes
    security = user
    domain logons = yes
    logon path = \\%N\profiles\%u
    logon drive = H:
    logon home = \\homeserver\%u\winprofile
    logon script = logon.cmd
    [netlogon]
    path = /var/lib/samba/netlogon
    read only = yes
    write list = ntadmin
    [profiles]
    path = /var/lib/samba/profiles
    read only = no
    create mask = 0600
    directory mask = 0700

    -The basic options shown above are explained as follows: -

    passdb backend

    +The basic options shown in are explained as follows: +

    passdb backend

    This contains all the user and group account information. Acceptable values for a PDC - are: smbpasswd, tdbsam, ldapsam. The 'guest' entry provides needed - default accounts.

    - Where is is intended to use backup domain controllers (BDCs) the only logical choice is - to use LDAP so that the passdb backend can be distributed. The tdbsam and smbpasswd files - can not effectively be distributed and therefore should not be used. -

    Domain Control Parameters

    + are: smbpasswd, tdbsam, and ldapsam. The “guest” entry provides + default accounts and is included by default, there is no need to add it explicitly.

    + Where use of backup Domain Controllers (BDCs) is intended, the only logical choice is + to use LDAP so the passdb backend can be distributed. The tdbsam and smbpasswd files + cannot effectively be distributed and therefore should not be used. +

    Domain Control Parameters

    The parameters os level, preferred master, domain master, security, - encrypt passwords, domain logons play a central role in assuring domain + encrypt passwords, and domain logons play a central role in assuring domain control and network logon support.

    - The os level must be set at or above a value of 32. A domain controller - must be the domain master browser, must be set in user mode security, - must support Microsoft compatible encrypted passwords, and must provide the network logon - service (domain logons). Encrypted passwords must be enabled, for more details on how - to do this, refer to the chapter on account information databases. -

    Environment Parameters

    - The parameters logon path, logon home, logon drive, logon script are + The os level must be set at or above a value of 32. A Domain Controller + must be the Domain Master Browser, must be set in user mode security, + must support Microsoft-compatible encrypted passwords, and must provide the network logon + service (domain logons). Encrypted passwords must be enabled. For more details on how + to do this, refer to . +

    Environment Parameters

    + The parameters logon path, logon home, logon drive, and logon script are environment support settings that help to facilitate client logon operations and that help to provide automated control facilities to ease network management overheads. Please refer to the man page information for these parameters. -

    NETLOGON Share

    - The NETLOGON share plays a central role in domain logon and domain membership support. - This share is provided on all Microsoft domain controllers. It is used to provide logon +

    NETLOGON Share

    + The NETLOGON share plays a central role in domain logon and Domain Membership support. + This share is provided on all Microsoft Domain Controllers. It is used to provide logon scripts, to store Group Policy files (NTConfig.POL), as well as to locate other common - tools that may be needed for logon processing. This is an essential share on a domain controller. -

    PROFILE Share

    - This share is used to store user desktop profiles. Eash user must have a directory at the root - of this share. This directory must be write enabled for the user and must be globally read enabled. - Samba-3 has a VFS module called 'fake_permissions' that may be installed on this share. This will - allow a Samba administrator to make the directory read only to everyone. Of course this is useful + tools that may be needed for logon processing. This is an essential share on a Domain Controller. +

    PROFILE Share

    + This share is used to store user desktop profiles. Each user must have a directory at the root + of this share. This directory must be write-enabled for the user and must be globally read-enabled. + Samba-3 has a VFS module called “fake_permissions” that may be installed on this share. This will + allow a Samba administrator to make the directory read-only to everyone. Of course this is useful only after the profile has been properly created.

    Note

    The above parameters make for a full set of parameters that may define the server's mode @@ -264,69 +279,69 @@ of operation. The following smb.conf parameters are th

    netbios name = BELERIAND
    workgroup = MIDEARTH
    domain logons = Yes
    domain master = Yes
    security = User

    The additional parameters shown in the longer listing above just makes for -more complete explanation. -

    Samba ADS Domain Control

    -Samba-3 is not, and can not act as, an Active Directory Server. It can not truly function as +a more complete explanation. +

    Samba ADS Domain Control

    +Samba-3 is not, and cannot act as, an Active Directory Server. It cannot truly function as an Active Directory Primary Domain Controller. The protocols for some of the functionality -the Active Directory Domain Controllers has been partially implemented on an experimental -only basis. Please do NOT expect Samba-3 to support these protocols. Do not depend -on any such functionality either now or in the future. The Samba-Team may remove these -experimental features or may change their behaviour. This is mentioned for the benefit of those -who have discovered secret capabilities in samba-3 and who have asked when this functionality will be -completed. The answer is: Maybe or maybe never! -

    -To be sure: Samba-3 is designed to provide most of the functionality that Microsoft Windows NT4 style -domain controllers have. Samba-3 does NOT have all the capabilities of Windows NT4, but it does have +of Active Directory Domain Controllers has been partially implemented on an experimental +only basis. Please do not expect Samba-3 to support these protocols. Do not depend +on any such functionality either now or in the future. The Samba Team may remove these +experimental features or may change their behavior. This is mentioned for the benefit of those +who have discovered secret capabilities in Samba-3 and who have asked when this functionality will be +completed. The answer is maybe or maybe never! +

    +To be sure, Samba-3 is designed to provide most of the functionality that Microsoft Windows NT4-style +Domain Controllers have. Samba-3 does not have all the capabilities of Windows NT4, but it does have a number of features that Windows NT4 domain contollers do not have. In short, Samba-3 is not NT4 and it -is not Windows Server 200x and it is not an Active Directory server. We hope this is plain and simple +is not Windows Server 200x, it is not an Active Directory server. We hope this is plain and simple enough for all to understand. -

    Domain and Network Logon Configuration

    +

    Domain and Network Logon Configuration

    The subject of Network or Domain Logons is discussed here because it forms an integral part of the essential functionality that is provided by a Domain Controller. -

    Domain Network Logon Service

    +

    Domain Network Logon Service

    All Domain Controllers must run the netlogon service (domain logons -in Samba). One Domain Controller must be configured with domain master = Yes -(the Primary Domain Controller); on ALL Backup Domain Controllers domain master = No +in Samba). One Domain Controller must be configured with domain master = Yes +(the Primary Domain Controller); on all Backup Domain Controllers domain master = No must be set. -

    Example Configuration

    Example 5.2. smb.conf for being a PDC

    [global]
    domain logons = Yes
    domain master = (Yes on PDC, No on BDCs)
    [netlogon]
    comment = Network Logon Service
    path = /var/lib/samba/netlogon
    guest ok = Yes
    browseable = No

    The Special Case of MS Windows XP Home Edition

    Note

    +

    Example Configuration

    Example 5.2. smb.conf for being a PDC

    [global]
    domain logons = Yes
    domain master = (Yes on PDC, No on BDCs)
    [netlogon]
    comment = Network Logon Service
    path = /var/lib/samba/netlogon
    guest ok = Yes
    browseable = No

    The Special Case of MS Windows XP Home Edition

    +To be completely clear: If you want MS Windows XP Home Edition to integrate with your +MS Windows NT4 or Active Directory Domain Security, understand it cannot be done. +The only option is to purchase the upgrade from MS Windows XP Home Edition to +MS Windows XP Professional. +

    Note

    MS Windows XP Home Edition does not have the ability to join any type of Domain -security facility. Unlike, MS Windows 9x / Me, MS Windows XP Home Edition also completely +Security facility. Unlike MS Windows 9x/Me, MS Windows XP Home Edition also completely lacks the ability to log onto a network.

    -To be completely clear: If you want MS Windows XP Home Edition to integrate with your -MS Windows NT4 or Active Directory Domain security understand - IT CAN NOT BE DONE. -Your only choice is to buy the upgrade pack from MS Windows XP Home Edition to -MS Windows XP Professional. -

    -Now that this has been said, please do NOT ask the mailing list, or email any of the -Samba-Team members with your questions asking how to make this work. It can't be done. +Now that this has been said, please do not ask the mailing list or email any of the +Samba Team members with your questions asking how to make this work. It can't be done. If it can be done, then to do so would violate your software license agreement with Microsoft, and we recommend that you do not do that. -

    The Special Case of Windows 9x / Me

    +

    The Special Case of Windows 9x/Me

    A domain and a workgroup are exactly the same in terms of network -browsing. The difference is that a distributable authentication +browsing. The difference is that a distributable authentication database is associated with a domain, for secure login access to a -network. Also, different access rights can be granted to users if they +network. Also, different access rights can be granted to users if they successfully authenticate against a domain logon server. Samba-3 does this -now in the same way that MS Windows NT/2K. +now in the same way as MS Windows NT/200x.

    The SMB client logging on to a domain has an expectation that every other server in the domain should accept the same authentication information. Network browsing functionality of domains and workgroups is identical and is explained in this documentation under the browsing discussions. -It should be noted, that browsing is totally orthogonal to logon support. +It should be noted that browsing is totally orthogonal to logon support.

    Issues related to the single-logon network model are discussed in this -section. Samba supports domain logons, network logon scripts, and user -profiles for MS Windows for workgroups and MS Windows 9X/ME clients +section. Samba supports domain logons, network logon scripts and user +profiles for MS Windows for workgroups and MS Windows 9X/ME clients, which are the focus of this section.

    When an SMB client in a domain wishes to logon, it broadcasts requests for a -logon server. The first one to reply gets the job, and validates its +logon server. The first one to reply gets the job, and validates its password using whatever mechanism the Samba administrator has installed. It is possible (but ill advised ) to create a domain where the user -database is not shared between servers, i.e. they are effectively workgroup -servers advertising themselves as participating in a domain. This +database is not shared between servers, i.e., they are effectively workgroup +servers advertising themselves as participating in a domain. This demonstrates how authentication is quite different from but closely involved with domains.

    @@ -334,121 +349,119 @@ Using these features you can make your clients verify their logon via the Samba server; make clients run a batch file when they logon to the network and download their preferences, desktop and start menu.

    -MS Windows XP Home edition is NOT able to join a domain and does not permit +MS Windows XP Home edition is not able to join a domain and does not permit the use of domain logons.

    Before launching into the configuration instructions, it is -worthwhile to look at how a Windows 9x/ME client performs a logon: +worthwhile to look at how a Windows 9x/Me client performs a logon:

    1. The client broadcasts (to the IP broadcast address of the subnet it is in) a NetLogon request. This is sent to the NetBIOS name DOMAIN<#1c> at the - NetBIOS layer. The client chooses the first response it receives, which + NetBIOS layer. The client chooses the first response it receives, which contains the NetBIOS name of the logon server to use in the format of \\SERVER.

    2. - The client then connects to that server, logs on (does an SMBsessetupX) and + The client connects to that server, logs on (does an SMBsessetupX) and then connects to the IPC$ share (using an SMBtconX).

    3. - The client then does a NetWkstaUserLogon request, which retrieves the name + The client does a NetWkstaUserLogon request, which retrieves the name of the user's logon script.

    4. - The client then connects to the NetLogon share and searches for said script - and if it is found and can be read, is retrieved and executed by the client. + The client then connects to the NetLogon share and searches for said script. + If it is found and can be read, it is retrieved and executed by the client. After this, the client disconnects from the NetLogon share.

    5. - The client then sends a NetUserGetInfo request to the server, to retrieve + The client sends a NetUserGetInfo request to the server to retrieve the user's home share, which is used to search for profiles. Since the response to the NetUserGetInfo request does not contain much more than - the user's home share, profiles for Win9X clients MUST reside in the user + the user's home share, profiles for Windows 9x clients must reside in the user home directory.

    6. - The client then connects to the user's home share and searches for the + The client connects to the user's home share and searches for the user's profile. As it turns out, you can specify the user's home share as a sharename and path. For example, \\server\fred\.winprofile. If the profiles are found, they are implemented.

    7. - The client then disconnects from the user's home share, and reconnects to + The client then disconnects from the user's home share and reconnects to the NetLogon share and looks for CONFIG.POL, the policies file. If this is found, it is read and implemented.

    -The main difference between a PDC and a Windows 9x logon server configuration is that +The main difference between a PDC and a Windows 9x/Me logon server configuration is:

    • - Password encryption is not required for a Windows 9x logon server. But note + Password encryption is not required for a Windows 9x/Me logon server. But note that beginning with MS Windows 98 the default setting is that plain-text password support is disabled. It can be re-enabled with the registry - changes that are documented in the chapter on Policies. + changes that are documented in .

    • - Windows 9x/ME clients do not require and do not use machine trust accounts. + Windows 9x/Me clients do not require and do not use Machine Trust Accounts.

    -A Samba PDC will act as a Windows 9x logon server; after all, it does provide the -network logon services that MS Windows 9x / Me expect to find. +A Samba PDC will act as a Windows 9x/Me logon server; after all, it does provide the +network logon services that MS Windows 9x/Me expect to find.

    Note

    Use of plain-text passwords is strongly discouraged. Where used they are easily detected using a sniffer tool to examine network traffic. -

    Security Mode and Master Browsers

    -There are a few comments to make in order to tie up some -loose ends. There has been much debate over the issue of whether -or not it is ok to configure Samba as a Domain Controller in security -modes other than USER. The only security mode -which will not work due to technical reasons is SHARE -mode security. DOMAIN and SERVER -mode security are really just a variation on SMB user level security. +

    Security Mode and Master Browsers

    +There are a few comments to make in order to tie up some loose ends. There has been +much debate over the issue of whether it is okay to configure Samba as a Domain +Controller in security modes other than user. The only security mode that will +not work due to technical reasons is share-mode security. Domain and server mode +security are really just a variation on SMB User Level Security.

    Actually, this issue is also closely tied to the debate on whether -or not Samba must be the domain master browser for its workgroup -when operating as a DC. While it may technically be possible +Samba must be the Domain Master Browser for its workgroup +when operating as a DC. While it may technically be possible to configure a server as such (after all, browsing and domain logons are two distinctly different functions), it is not a good idea to do -so. You should remember that the DC must register the DOMAIN<#1b> NetBIOS -name. This is the name used by Windows clients to locate the DC. +so. You should remember that the DC must register the DOMAIN<#1b> NetBIOS +name. This is the name used by Windows clients to locate the DC. Windows clients do not distinguish between the DC and the DMB. -A DMB is a Domain Master Browser - see Domain Master Browser. -For this reason, it is very wise to configure the Samba DC as the DMB. -

    -Now back to the issue of configuring a Samba DC to use a mode other -than security = user. If a Samba host is configured to use -another SMB server or DC in order to validate user connection -requests, then it is a fact that some other machine on the network -(the password server) knows more about the user than the Samba host. -99% of the time, this other host is a domain controller. Now -in order to operate in domain mode security, the workgroup parameter -must be set to the name of the Windows NT domain (which already -has a domain controller). If the domain does NOT already have a Domain Controller -then you do not yet have a Domain! +A DMB is a Domain Master Browser see . +For this reason, it is wise to configure the Samba DC as the DMB. +

    +Now back to the issue of configuring a Samba DC to use a mode other than +security = user. If a Samba host is +configured to use another SMB server or DC in order to validate user connection requests, +it is a fact that some other machine on the network (the password server) +knows more about the user than the Samba host. About 99% of the time, this other host is +a Domain Controller. Now to operate in domain mode security, the workgroup +parameter must be set to the name of the Windows NT domain (which already has a Domain Controller). +If the domain does not already have a Domain Controller, you do not yet have a Domain.

    Configuring a Samba box as a DC for a domain that already by definition has a PDC is asking for trouble. Therefore, you should always configure the Samba DC -to be the DMB for its domain and set security = user. +to be the DMB for its domain and set security = user. This is the only officially supported mode of operation. -

    Common Errors

    '$' cannot be included in machine name

    -A 'machine account', (typically) stored in /etc/passwd, -takes the form of the machine name with a '$' appended. FreeBSD (and other BSD -systems?) won't create a user with a '$' in their name. +

    Common Errors

    $” Cannot Be Included in Machine Name

    +A machine account, typically stored in /etc/passwd, takes the form of the machine +name with a “$” appended. FreeBSD (and other BSD systems) will not create a user with a +“$” in the name.

    The problem is only in the program used to make the entry. Once made, it works perfectly. -Create a user without the '$'. Then use vipw to edit the entry, adding -the '$'. Or create the whole entry with vipw if you like; make sure you use a unique User ID! -

    Note

    -The UNIX tool vipw is a common tool for directly editting the /etc/passwd file. -

    Joining domain fails because of existing machine account

    I get told "You already have a connection to the Domain...." -or "Cannot join domain, the credentials supplied conflict with an -existing set.." when creating a machine trust account.

    -This happens if you try to create a machine trust account from the -machine itself and already have a connection (e.g. mapped drive) -to a share (or IPC$) on the Samba PDC. The following command +Create a user without the “$”. Then use vipw to edit the entry, adding +the “$”. Or create the whole entry with vipw if you like; make sure you use a unique user login ID. +

    Note

    The machine account must have the exact name that the workstation has.

    Note

    +The UNIX tool vipw is a common tool for directly editing the /etc/passwd file. +

    Joining Domain Fails Because of Existing Machine Account

    +“I get told, `You already have a connection to the Domain....' or `Cannot join domain, the +credentials supplied conflict with an existing set...' when creating a Machine Trust Account.” +

    +This happens if you try to create a Machine Trust Account from the machine itself and already have a +connection (e.g., mapped drive) to a share (or IPC$) on the Samba PDC. The following command will remove all network drive connections:

     C:\> net use * /d
     

    -Further, if the machine is already a 'member of a workgroup' that +

    +Further, if the machine is already a “member of a workgroup” that is the same name as the domain you are joining (bad idea) you will -get this message. Change the workgroup name to something else, it +get this message. Change the workgroup name to something else, it does not matter what, reboot, and try again. -

    The system can not log you on (C000019B)....

    I joined the domain successfully but after upgrading -to a newer version of the Samba code I get the message, The system -can not log you on (C000019B), Please try again or consult your -system administrator when attempting to logon.” +

    The System Cannot Log You On (C000019B)

    I joined the domain successfully but after upgrading +to a newer version of the Samba code I get the message, `The system +cannot log you on (C000019B), Please try again or consult your +system administrator when attempting to logon.'

    + This occurs when the domain SID stored in the secrets.tdb database is changed. The most common cause of a change in domain SID is when the domain name and/or the server name (NetBIOS name) is changed. @@ -456,55 +469,62 @@ The only way to correct the problem is to restore the original domain SID or remove the domain client from the domain and rejoin. The domain SID may be reset using either the net or rpcclient utilities.

    -The reset or change the domain SID you can use the net command as follows: +To reset or change the domain SID you can use the net command as follows:

     root# net getlocalsid 'OLDNAME'
     root# net setlocalsid 'SID'
     

    -Workstation machine trust accounts work only with the Domain (or network) SID. If this SID changes -then domain members (workstations) will not be able to log onto the domain. The original Domain SID +Workstation Machine Trust Accounts work only with the Domain (or network) SID. If this SID changes +Domain Members (workstations) will not be able to log onto the domain. The original Domain SID can be recovered from the secrets.tdb file. The alternative is to visit each workstation to re-join it to the domain. -

    The machine trust account not accessible

    - “When I try to join the domain I get the message The machine account -for this computer either does not exist or is not accessible. What's +

    The Machine Trust Account Is Not Accessible

    +“When I try to join the domain I get the message, `The machine account +for this computer either does not exist or is not accessible'. What's wrong?

    -This problem is caused by the PDC not having a suitable machine trust account. -If you are using the add machine script method to create +This problem is caused by the PDC not having a suitable Machine Trust Account. +If you are using the add machine script method to create accounts then this would indicate that it has not worked. Ensure the domain admin user system is working.

    -Alternatively if you are creating account entries manually then they +Alternately, if you are creating account entries manually then they have not been created correctly. Make sure that you have the entry -correct for the machine trust account in smbpasswd file on the Samba PDC. +correct for the Machine Trust Account in smbpasswd file on the Samba PDC. If you added the account using an editor rather than using the smbpasswd utility, make sure that the account name is the machine NetBIOS name -with a '$' appended to it ( i.e. computer_name$ ). There must be an entry +with a “$” appended to it (i.e., computer_name$). There must be an entry in both /etc/passwd and the smbpasswd file.

    -Some people have also reported -that inconsistent subnet masks between the Samba server and the NT -client can cause this problem. Make sure that these are consistent -for both client and server. -

    Account disabled

    When I attempt to login to a Samba Domain from a NT4/W2K workstation, - I get a message about my account being disabled.

    +Some people have also reported that inconsistent subnet masks between the Samba server and the NT +client can cause this problem. Make sure that these are consistent for both client and server. +

    Account Disabled

    When I attempt to login to a Samba Domain from a NT4/W200x workstation, +I get a message about my account being disabled.

    Enable the user accounts with smbpasswd -e username -, this is normally done as an account is created. -

    Domain Controller Unavailable

    Until a few minutes after Samba has started, clients get the error "Domain Controller Unavailable"

    - A domain controller has to announce on the network who it is. This usually takes a while. -

    Can not log onto domain member workstation after joining domain

    After successfully joining the domain user logons fail with one of two messages:

    One to the effect that the domain controller can not be found, the other claiming that the - account does not exist in the domain or that the password is incorrect.

    This may be due to incompatible settings between - the Windows client and the Samba-3 server for schannel (secure channel) settings - or smb signing settings. Check your samba settings for - client schannel, server schannel, client signing, server signing by executing: - testparm -v | more and looking for the value of these parameters. -

    - Also use the Microsoft Management Console - Local Security Settings. This tool is available from the - Control Panel. The Policy settings are found in the Local Policies / Securty Options area and are prefixed by - Secure Channel: ..., and Digitally sign .... -

    - It is important that these be set consistently with the Samba-3 server settings. -

    +
    . This is normally done as an account is created. +

    Domain Controller Unavailable

    Until a few minutes after Samba has started, clients get the error `Domain Controller Unavailable'

    +A Domain Controller has to announce its role on the network. This usually takes a while. Be patient for up to fifteen minutes, +then try again. +

    Cannot Log onto Domain Member Workstation After Joining Domain

    + + +After successfully joining the domain, user logons fail with one of two messages: one to the +effect that the Domain Controller cannot be found; the other claims that the account does not +exist in the domain or that the password is incorrect. This may be due to incompatible +settings between the Windows client and the Samba-3 server for schannel +(secure channel) settings or smb signing settings. Check your Samba +settings for client schannel, server schannel, client signing, server signing +by executing: +

    +testparm -v | more and looking for the value of these parameters.
    +

    +

    +Also use the Microsoft Management Console Local Security Settings. This tool is available from the +Control Panel. The Policy settings are found in the Local Policies/Securty Options area and are prefixed by +Secure Channel: ..., and Digitally sign ..... +

    +It is important that these be set consistently with the Samba-3 server settings. +



    [2] See , and + .

    diff --git a/docs/htmldocs/samba.7.html b/docs/htmldocs/samba.7.html index a0e5b8937c..7df44688aa 100644 --- a/docs/htmldocs/samba.7.html +++ b/docs/htmldocs/samba.7.html @@ -2,8 +2,8 @@ that implements the Server Message Block (commonly abbreviated as SMB) protocol for UNIX systems. This protocol is sometimes also referred to as the Common Internet File System (CIFS). For a - more thorough description, see - http://www.ubiqx.org/cifs/. Samba also implements the NetBIOS + more thorough description, see + http://www.ubiqx.org/cifs/. Samba also implements the NetBIOS protocol in nmbd.

    smbd(8)

    The smbd daemon provides the file and print services to SMB clients, such as Windows 95/98, Windows NT, Windows for Workgroups or LanManager. The configuration file @@ -70,9 +70,9 @@ recommended that you read the documentation that comes with Samba and the manual pages of those components that you use. If the manual pages and documents aren't clear enough then please visit - http://devel.samba.org + http://devel.samba.org for information on how to file a bug report or submit a patch.

    If you require help, visit the Samba webpage at - http://www.samba.org/ and + http://www.samba.org/ and explore the many option available to you.

    AVAILABILITY

    The Samba software suite is licensed under the GNU Public License(GPL). A copy of that license should @@ -82,25 +82,25 @@ obtained via anonymous ftp from samba.org in the directory pub/samba/. It is also available on several mirror sites worldwide.

    You may also find useful information about Samba - on the newsgroup - comp.protocol.smb and the Samba mailing + on the newsgroup + comp.protocol.smb and the Samba mailing list. Details on how to join the mailing list are given in the README file that comes with Samba.

    If you have access to a WWW viewer (such as Mozilla or Konqueror) then you will also find lots of useful information, including back issues of the Samba mailing list, at - http://lists.samba.org.

    VERSION

    This man page is correct for version 3.0 of the + http://lists.samba.org.

    VERSION

    This man page is correct for version 3.0 of the Samba suite.

    CONTRIBUTIONS

    If you wish to contribute to the Samba project, then I suggest you join the Samba mailing list at - http://lists.samba.org. + http://lists.samba.org.

    If you have patches to submit, visit - http://devel.samba.org/ + http://devel.samba.org/ for information on how to do it properly. We prefer patches in diff -u format.

    CONTRIBUTORS

    Contributors to the project are now too numerous to mention here but all deserve the thanks of all Samba users. To see a full list, look at the change-log in the source package - for the pre-CVS changes and at - http://cvs.samba.org/ + for the pre-CVS changes and at + http://cvs.samba.org/ for the contributors to Samba post-CVS. CVS is the Open Source source code control system used by the Samba Team to develop Samba. The project would have been unmanageable without it.

    AUTHOR

    The original Samba software and related utilities @@ -108,8 +108,8 @@ by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

    The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another - excellent piece of Open Source software, available at - ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 + excellent piece of Open Source software, available at + ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.

    diff --git a/docs/htmldocs/securing-samba.html b/docs/htmldocs/securing-samba.html index 492780765e..f4adfe8fd6 100644 --- a/docs/htmldocs/securing-samba.html +++ b/docs/htmldocs/securing-samba.html @@ -1,192 +1,180 @@ -Chapter 15. Securing Samba

    Chapter 15. Securing Samba

    Andrew Tridgell

    Samba Team

    John H. Terpstra

    Samba Team

    May 26, 2003

    Introduction

    +Chapter 15. Securing Samba

    Chapter 15. Securing Samba

    Andrew Tridgell

    Samba Team

    John H. Terpstra

    Samba Team

    May 26, 2003

    Introduction

    This note was attached to the Samba 2.2.8 release notes as it contained an -important security fix. The information contained here applies to Samba +important security fix. The information contained here applies to Samba installations in general. -

    -A new apprentice reported for duty to the Chief Engineer of a boiler house. He said, "Here I am, -if you will show me the boiler I'll start working on it." Then engineer replied, "You're leaning -on it!" -

    -Security concerns are just like that: You need to know a little about the subject to appreciate +

    +A new apprentice reported for duty to the chief engineer of a boiler house. He said, “Here I am, +if you will show me the boiler I'll start working on it.” Then engineer replied, “You're leaning +on it!” +

    +Security concerns are just like that. You need to know a little about the subject to appreciate how obvious most of it really is. The challenge for most of us is to discover that first morsel of knowledge with which we may unlock the secrets of the masters. -

    Features and Benefits

    -There are three level at which security principals must be observed in order to render a site -at least moderately secure. These are: the perimeter firewall, the configuration of the host -server that is running Samba, and Samba itself. +

    Features and Benefits

    +There are three levels at which security principals must be observed in order to render a site +at least moderately secure. They are the perimeter firewall, the configuration of the host +server that is running Samba and Samba itself.

    Samba permits a most flexible approach to network security. As far as possible Samba implements the latest protocols to permit more secure MS Windows file and print operations.

    Samba may be secured from connections that originate from outside the local network. This may be -done using host based protection (using samba's implementation of a technology -known as "tcpwrappers", or it may be done be using interface based exclusion -so that smbd will bind only to specifically permitted interfaces. It is also -possible to set specific share or resource based exclusions, eg: on the [IPC$] +done using host-based protection (using samba's implementation of a technology +known as “tcpwrappers,” or it may be done be using interface-based exclusion +so smbd will bind only to specifically permitted interfaces. It is also +possible to set specific share or resource-based exclusions, for example on the [IPC$] auto-share. The [IPC$] share is used for browsing purposes as well as to establish TCP/IP connections.

    -Another method by which Samba may be secured is by way of setting Access Control Entries in an Access -Control List on the shares themselves. This is discussed in the chapter on File, Directory and Share Access -Control. -

    Technical Discussion of Protective Measures and Issues

    +Another method by which Samba may be secured is by setting Access Control Entries (ACEs) in an Access +Control List (ACL) on the shares themselves. This is discussed in . +

    Technical Discussion of Protective Measures and Issues

    The key challenge of security is the fact that protective measures suffice at best only to close the door on known exploits and breach techniques. Never assume that because you have followed these few measures that the Samba server is now an impenetrable fortress! Given the history of information systems so far, it is only a matter of time before someone will find yet another vulnerability. -

    Using host based protection

    - In many installations of Samba the greatest threat comes for outside - your immediate network. By default Samba will accept connections from +

    Using Host-Based Protection

    + In many installations of Samba, the greatest threat comes from outside + your immediate network. By default, Samba will accept connections from any host, which means that if you run an insecure version of Samba on a host that is directly connected to the Internet you can be especially vulnerable.

    - One of the simplest fixes in this case is to use the hosts allow and - hosts deny options in the Samba smb.conf configuration file to only - allow access to your server from a specific range of hosts. An example - might be: + One of the simplest fixes in this case is to use the hosts allow and + hosts deny options in the Samba smb.conf configuration file to only + allow access to your server from a specific range of hosts. An example might be:

    hosts allow = 127.0.0.1 192.168.2.0/24 192.168.3.0/24
    hosts deny = 0.0.0.0/0

    - The above will only allow SMB connections from 'localhost' (your own - computer) and from the two private networks 192.168.2 and - 192.168.3. All other connections will be refused as soon - as the client sends its first packet. The refusal will be marked as a - not listening on called name error. -

    User based protection

    - If you want to restrict access to your server to valid users only then the following + The above will only allow SMB connections from localhost (your own + computer) and from the two private networks 192.168.2 and 192.168.3. All other + connections will be refused as soon as the client sends its first packet. The refusal + will be marked as not listening on called name error. +

    User-Based Protection

    + If you want to restrict access to your server to valid users only, then the following method may be of use. In the smb.conf [global] section put:

    valid users = @smbusers, jacko

    - What this does is, it restricts all server access to either the user jacko + This restricts all server access to either the user jacko or to members of the system group smbusers. -

    Using interface protection

    - By default Samba will accept connections on any network interface that +

    Using Interface Protection

    + By default, Samba will accept connections on any network interface that it finds on your system. That means if you have a ISDN line or a PPP connection to the Internet then Samba will accept connections on those links. This may not be what you want.

    - You can change this behaviour using options like the following: + You can change this behavior using options like this:

    interfaces = eth* lo
    bind interfaces only = yes

    This tells Samba to only listen for connections on interfaces with a - name starting with 'eth' such as eth0, eth1, plus on the loopback - interface called 'lo'. The name you will need to use depends on what - OS you are using, in the above I used the common name for Ethernet + name starting with eth such as eth0, eth1 plus on the loopback + interface called lo. The name you will need to use depends on what + OS you are using. In the above, I used the common name for Ethernet adapters on Linux.

    - If you use the above and someone tries to make a SMB connection to - your host over a PPP interface called 'ppp0' then they will get a TCP - connection refused reply. In that case no Samba code is run at all as + If you use the above and someone tries to make an SMB connection to + your host over a PPP interface called ppp0, then they will get a TCP + connection refused reply. In that case, no Samba code is run at all as the operating system has been told not to pass connections from that - interface to any samba process. -

    Using a firewall

    - Many people use a firewall to deny access to services that they don't - want exposed outside their network. This can be a very good idea, - although I would recommend using it in conjunction with the above - methods so that you are protected even if your firewall is not active + interface to any Samba process. +

    Using a Firewall

    + Many people use a firewall to deny access to services they do not + want exposed outside their network. This can be a good idea, + although I recommend using it in conjunction with the above + methods so you are protected even if your firewall is not active for some reason.

    - If you are setting up a firewall then you need to know what TCP and + If you are setting up a firewall, you need to know what TCP and UDP ports to allow and block. Samba uses the following:

    UDP/137 - used by nmbd
    UDP/138 - used by nmbd
    TCP/139 - used by smbd
    TCP/445 - used by smbd

    The last one is important as many older firewall setups may not be aware of it, given that this port was only added to the protocol in recent years. -

    Using a IPC$ share deny

    +

    Using IPC$ Share-Based Denials

    If the above methods are not suitable, then you could also place a more specific deny on the IPC$ share that is used in the recently discovered security hole. This allows you to offer access to other shares while denying access to IPC$ from potentially untrustworthy hosts.

    - To do that you could use: -

    [ipc$]
    hosts allow = 192.168.115.0/24 127.0.0.1
    hosts deny = 0.0.0.0/0

    - this would tell Samba that IPC$ connections are not allowed from - anywhere but the two listed places (localhost and a local - subnet). Connections to other shares would still be allowed. As the - IPC$ share is the only share that is always accessible anonymously + To do this you could use: +

    [IPC$]
    hosts allow = 192.168.115.0/24 127.0.0.1
    hosts deny = 0.0.0.0/0

    + This instructs Samba that IPC$ connections are not allowed from + anywhere except from the two listed network addresses (localhost and the 192.168.115 + subnet). Connections to other shares are still allowed. As the + IPC$ share is the only share that is always accessible anonymously, this provides some level of protection against attackers that do not - know a username/password for your host. -

    - If you use this method then clients will be given a access denied - reply when they try to access the IPC$ share. That means that those - clients will not be able to browse shares, and may also be unable to - access some other resources. + know a valid username/password for your host.

    - This is not recommended unless you cannot use one of the other - methods listed above for some reason. -

    NTLMv2 Security

    - To configure NTLMv2 authentication the following registry keys are worth knowing about: + If you use this method, then clients will be given an `access denied' + reply when they try to access the IPC$ share. Those clients will not be able to + browse shares, and may also be unable to access some other resources. This is not + recommended unless you cannot use one of the other methods listed above for some reason. +

    NTLMv2 Security

    + To configure NTLMv2 authentication, the following registry keys are worth knowing about:

     		[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa]
    -		"lmcompatibilitylevel"=dword:00000003
    +		"lmcompatibilitylevel"=dword:00000003
     		

    - 0x3 - Send NTLMv2 response only. Clients will use NTLMv2 authentication, - use NTLMv2 session security if the server supports it. Domain - controllers accept LM, NTLM and NTLMv2 authentication. + The value 0x00000003 means send NTLMv2 response only. Clients will use NTLMv2 authentication, + use NTLMv2 session security if the server supports it. Domain Controllers accept LM, + NTLM and NTLMv2 authentication.

     		[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0]
    -		"NtlmMinClientSec"=dword:00080000
    +		"NtlmMinClientSec"=dword:00080000
     		

    - 0x80000 - NTLMv2 session security. If either NtlmMinClientSec or - NtlmMinServerSec is set to 0x80000, the connection will fail if NTLMv2 - session security is not negotiated. -

    Upgrading Samba

    -Please check regularly on http://www.samba.org/ for updates and -important announcements. Occasionally security releases are made and + The value 0x00080000 means permit only NTLMv2 session security. If either NtlmMinClientSec or + NtlmMinServerSec is set to 0x00080000, the connection will fail if NTLMv2 + session security is not negotiated. +

    Upgrading Samba

    +Please check regularly on http://www.samba.org/ for updates and +important announcements. Occasionally security releases are made and it is highly recommended to upgrade Samba when a security vulnerability is discovered. Check with your OS vendor for OS specific upgrades. -

    Common Errors

    -If all of samba and host platform configuration were really as intuitive as one might like then this +

    Common Errors

    +If all of Samba and host platform configuration were really as intuitive as one might like them to be, this section would not be necessary. Security issues are often vexing for a support person to resolve, not -because of the complexity of the problem, but for reason that most administrators who post what turns +because of the complexity of the problem, but for the reason that most administrators who post what turns out to be a security problem request are totally convinced that the problem is with Samba. -

    Smbclient works on localhost, but the network is dead

    - This is a very common problem. Red Hat Linux (as do others) will install a default firewall. - With the default firewall in place only traffic on the loopback adapter (IP address 127.0.0.1) - will be allowed through the firewall. +

    Smbclient Works on Localhost, but the Network Is Dead

    + This is a common problem. Red Hat Linux (and others) installs a default firewall. + With the default firewall in place, only traffic on the loopback adapter (IP address 127.0.0.1) + is allowed through the firewall.

    - The solution is either to remove the firewall (stop it) or to modify the firewall script to + The solution is either to remove the firewall (stop it) or modify the firewall script to allow SMB networking traffic through. See section above in this chapter. -

    Why can users access home directories of other users?

    +

    Why Can Users Access Home Directories of Other Users?

    We are unable to keep individual users from mapping to any other user's home directory once they have supplied a valid password! They only need - to enter their own password. I have not found *any* method that I can - use to configure samba to enforce that only a user may map their own - home directory. + to enter their own password. I have not found any method to configure + Samba so that users may map only their own home directory.

    User xyzzy can map his home directory. Once mapped user xyzzy can also map - *anyone* else's home directory! + anyone else's home directory.

    - This is not a security flaw, it is by design. Samba allows - users to have *exactly* the same access to the UNIX filesystem - as they would if they were logged onto the UNIX box, except - that it only allows such views onto the file system as are - allowed by the defined shares. + This is not a security flaw, it is by design. Samba allows users to have + exactly the same access to the UNIX file system as when they were logged + onto the UNIX box, except that it only allows such views onto the file + system as are allowed by the defined shares.

    - This means that if your UNIX home directories are set up - such that one user can happily cd into another users - directory and do an ls, the UNIX security solution is to - change the UNIX file permissions on the users home directories - such that the cd and ls would be denied. + If your UNIX home directories are set up so that one user can happily cd + into another users directory and execute ls, the UNIX security solution is to change file + permissions on the user's home directories such that the cd and ls are denied.

    - Samba tries very hard not to second guess the UNIX administrators - security policies, and trusts the UNIX admin to set - the policies and permissions he or she desires. + Samba tries very hard not to second guess the UNIX administrators security policies, and + trusts the UNIX admin to set the policies and permissions he or she desires.

    - Samba does allow the setup you require when you have set the - only user = yes option on the share, is that you have not set the - valid users list for the share. + Samba allows the behavior you require. Simply put the only user = %S + option in the [homes] share definition.

    - Note that only user works in conjunction with the users= list, + The only user works in conjunction with the users = list, so to get the behavior you require, add the line :

    users = %S

    - this is equivalent to: + this is equivalent to adding

    valid users = %S

    to the definition of the [homes] share, as recommended in the smb.conf man page. -

    +

    diff --git a/docs/htmldocs/smb.conf.5.html b/docs/htmldocs/smb.conf.5.html index b6eb609bb0..7db96d5481 100644 --- a/docs/htmldocs/smb.conf.5.html +++ b/docs/htmldocs/smb.conf.5.html @@ -183,8 +183,8 @@ alias|alias|alias|alias... 100% reliable. It currently recognizes Samba, WfWg, Win95, WinNT and Win2k. Anything else will be known as "UNKNOWN". If it gets it wrong then sending a level - 3 log to samba@samba.org - should allow it to be fixed.

    %I

    The IP address of the client machine.

    %T

    the current date and time.

    %D

    Name of the domain or workgroup of the current user.

    %$(envvar)

    The value of the environment variable + 3 log to samba@samba.org + should allow it to be fixed.

    %I

    The IP address of the client machine.

    %T

    the current date and time.

    %D

    Name of the domain or workgroup of the current user.

    %$(envvar)

    The value of the environment variable envar.

    The following substitutes apply only to some configuration options(only those that are used when a connection has been established):

    %S

    the name of the current service, if any.

    %P

    the root directory of the current service, if any.

    %u

    user name of the current service, if any.

    %g

    primary group name of %u.

    %H

    the home directory of the user given @@ -244,11 +244,10 @@ alias|alias|alias|alias... connection is made as the username given in the "guest account =" for the service, irrespective of the supplied password.

    COMPLETE LIST OF GLOBAL PARAMETERS

    Here is a list of all global parameters. See the section of - each parameter for details. Note that some are synonyms.

    COMPLETE LIST OF SERVICE PARAMETERS

    Here is a list of all service parameters. See the section on - each parameter for details. Note that some are synonyms.

    EXPLANATION OF EACH PARAMETER

    abort shutdown script (G)

    This parameter only exists in the HEAD cvs branch + each parameter for details. Note that some are synonyms.

    COMPLETE LIST OF SERVICE PARAMETERS

    Here is a list of all service parameters. See the section on + each parameter for details. Note that some are synonyms.

    EXPLANATION OF EACH PARAMETER

    abort shutdown script (G)

    This parameter only exists in the HEAD cvs branch This a full path name to a script called by smbd(8) that - should stop a shutdown procedure issued by the - shutdown script.

    This command will be run as user.

    Default: None.

    Example: abort shutdown script = /sbin/shutdown -c

    acl compatibility (S)

    This parameter specifies what OS ACL semantics should + should stop a shutdown procedure issued by the .

    This command will be run as user.

    Default: None.

    Example: abort shutdown script = /sbin/shutdown -c

    acl compatibility (S)

    This parameter specifies what OS ACL semantics should be compatible with. Possible values are winnt for Windows NT 4, win2k for Windows 2000 and above and auto. If you specify auto, the value for this parameter @@ -291,11 +290,8 @@ alias|alias|alias|alias... The "add printer command" program can output a single line of text, which Samba will set as the port the new printer is connected to. If this line isn't output, Samba won't reload its printer shares. -

    See also - deleteprinter command, - printing, - show add - printer wizard

    Default: none

    Example: addprinter command = /usr/bin/addprinter

    add share command (G)

    Samba 2.2.0 introduced the ability to dynamically +

    See also , , +

    Default: none

    Example: addprinter command = /usr/bin/addprinter

    add share command (G)

    Samba 2.2.0 introduced the ability to dynamically add and delete shares via the Windows NT 4.0 Server Manager. The add share command is used to define an external program or script which will add a new service definition @@ -316,12 +312,9 @@ alias|alias|alias|alias... with the new share.

    This parameter is only used for add file shares. To add printer shares, - see the addprinter - command. + see the .

    - See also change share - command, delete share - command. + See also , .

    Default: none

    Example: add share command = /usr/local/bin/addshare

    add user script (G)

    This is the full pathname to a script that will be run AS ROOT by smbd(8) under special circumstances described below.

    Normally, a Samba server requires that UNIX users are created for all users accessing files on this server. For sites @@ -343,11 +336,8 @@ alias|alias|alias|alias... any %u argument to be the user name to create.

    If this script successfully creates the user then smbd will continue on as though the UNIX user already existed. In this way, UNIX users are dynamically created to - match existing Windows NT accounts.

    See also - security, - password server, - delete user - script.

    Default: add user script = <empty string>

    Example: add user script = /usr/local/samba/bin/add_user %u

    add user to group script (G)

    Full path to the script that will be called when + match existing Windows NT accounts.

    See also , , + .

    Default: add user script = <empty string>

    Example: add user script = /usr/local/samba/bin/add_user %u

    add user to group script (G)

    Full path to the script that will be called when a user is added to a group using the Windows NT domain administration tools. It will be run by smbd(8) AS ROOT. Any %g will be replaced with the group name and @@ -356,7 +346,18 @@ alias|alias|alias|alias... administrative privileges on the share. This means that they will do all file operations as the super-user (root).

    You should use this option very carefully, as any user in this list will be able to do anything they like on the share, - irrespective of file permissions.

    Default: no admin users

    Example: admin users = jason

    algorithmic rid base (G)

    This determines how Samba will use its + irrespective of file permissions.

    Default: no admin users

    Example: admin users = jason

    afs share (S)

    This parameter controls whether special AFS features are enabled + for this share. If enabled, it assumes that the directory exported via + the path parameter is a local AFS import. The + special AFS features include the attempt to hand-craft an AFS token + if you enabled --with-fake-kaserver in configure. +

    Default: afs share = no

    Example: afs share = yes

    afs username map (G)

    If you are using the fake kaserver AFS feature, you might + want to hand-craft the usernames you are creating tokens for. + For example this is necessary if you have users from several domain + in your AFS Protection Database. One possible scheme to code users + as DOMAIN+User as it is done by winbind with the + as a separator. +

    The mapped user name must contain the cell name to log into, + so without setting this parameter there will be no token.

    Default: none

    Example: afs username map = %u@afs.samba.org

    algorithmic rid base (G)

    This determines how Samba will use its algorithmic mapping from uids/gid to the RIDs needed to construct NT Security Identifiers.

    Setting this option to a larger value could be useful to sites @@ -367,9 +368,7 @@ alias|alias|alias|alias... mapping can't be 'turned off', but pushing it 'out of the way' should resolve the issues. Users and groups can then be assigned 'low' RIDs in arbitary-rid supporting backends. -

    Default: algorithmic rid base = 1000

    Example: algorithmic rid base = 100000

    allow hosts (S)

    Synonym for - hosts allow.

    allow trusted domains (G)

    This option only takes effect when the - security option is set to +

    Default: algorithmic rid base = 1000

    Example: algorithmic rid base = 100000

    allow hosts (S)

    Synonym for .

    allow trusted domains (G)

    This option only takes effect when the option is set to server or domain. If it is set to no, then attempts to connect to a resource from a domain or workgroup other than the one which smbd is running @@ -394,8 +393,7 @@ alias|alias|alias|alias... is 4.9. Do not change this parameter unless you have a specific need to set a Samba server to be a downlevel server.

    Default: announce version = 4.9

    Example: announce version = 2.0

    auth methods (G)

    This option allows the administrator to chose what authentication methods smbd will use when authenticating - a user. This option defaults to sensible values based on - security. This should be considered + a user. This option defaults to sensible values based on . This should be considered a developer option and used only in rare circumstances. In the majority (if not all) of production servers, the default setting should be adequate.

    Each entry in the list attempts to authenticate the user in turn, until the user authenticates. In practice only one method will ever actually @@ -406,15 +404,14 @@ alias|alias|alias|alias... for remote users through winbindd), ntdomain (pre-winbindd method of authentication for remote domain users; deprecated in favour of winbind method), trustdomain (authenticate trusted users by contacting the - remote DC directly from smbd; deprecated in favour of winbind method).

    Default: auth methods = <empty string>

    Example: auth methods = guest sam winbind

    auto services (G)

    This is a synonym for the - preload.

    available (S)

    This parameter lets you "turn off" a service. If + remote DC directly from smbd; deprecated in favour of winbind method).

    Default: auth methods = <empty string>

    Example: auth methods = guest sam winbind

    auto services (G)

    This is a synonym for the .

    available (S)

    This parameter lets you "turn off" a service. If available = no, then ALL attempts to connect to the service will fail. Such failures are logged.

    Default: available = yes

    bind interfaces only (G)

    This global parameter allows the Samba admin to limit what interfaces on a machine will serve SMB requests. It affects file service smbd(8) and name service nmbd(8) in a slightly different ways.

    For name service it causes nmbd to bind to ports 137 and 138 on the interfaces listed in - the interfaces parameter. nmbd also + the parameter. nmbd also binds to the "all addresses" interface (0.0.0.0) on ports 137 and 138 for the purposes of reading broadcast messages. If this option is not set then nmbd will service @@ -429,7 +426,7 @@ alias|alias|alias|alias... interfaces list. IP Source address spoofing does defeat this simple check, however, so it must not be used seriously as a security feature for nmbd.

    For file service it causes smbd(8) to bind only to the interface list - given in the interfaces parameter. This + given in the parameter. This restricts the networks that smbd will serve to packets coming in those interfaces. Note that you should not use this parameter for machines that are serving PPP or other intermittent or non-broadcast network @@ -473,12 +470,11 @@ alias|alias|alias|alias... is an experimental option it may be removed in a future release.

    Changing this option does not change the disk free reporting size, just the block size unit reported to the client. -

    browsable (S)

    See the - browseable.

    browseable (S)

    This controls whether this share is seen in +

    browsable (S)

    See the .

    browseable (S)

    This controls whether this share is seen in the list of available shares in a net view and in the browse list.

    Default: browseable = yes

    browse list (G)

    This controls whether smbd(8) will serve a browse list to a client doing a NetServerEnum call. Normally set to yes. You should never need to change - this.

    Default: browse list = yes

    case sensitive (S)

    See the discussion in the section NAME MANGLING.

    Default: case sensitive = no

    casesignames (S)

    Synonym for case sensitive.

    change notify timeout (G)

    This SMB allows a client to tell a server to + this.

    Default: browse list = yes

    case sensitive (S)

    See the discussion in the section .

    Default: case sensitive = no

    casesignames (S)

    Synonym for .

    change notify timeout (G)

    This SMB allows a client to tell a server to "watch" a particular directory for any changes and only reply to the SMB request when a change has occurred. Such constant scanning of a directory is expensive under UNIX, hence an smbd(8) daemon only performs such a scan @@ -506,9 +502,7 @@ alias|alias|alias|alias... This parameter is only used modify existing file shares definitions. To modify printer shares, use the "Printers..." folder as seen when browsing the Samba host.

    - See also add share - command, delete - share command. + See also , .

    Default: none

    Example: change share command = /usr/local/bin/addshare

    client lanman auth (G)

    This parameter determines whether or not smbclient(8) and other samba client tools will attempt to authenticate itself to servers using the weaker LANMAN password hash. If disabled, only server which support NT @@ -524,7 +518,9 @@ alias|alias|alias|alias... response.

    If enabled, only an NTLMv2 and LMv2 response (both much more secure than earlier versions) will be sent. Many servers (including NT4 < SP4, Win9x and Samba 2.2) are not compatible with - NTLMv2.

    If disabled, an NTLM response (and possibly a LANMAN response) + NTLMv2.

    Similarly, if enabled, NTLMv1, client lanman auth and client plaintext auth + authentication will be disabled. This also disables share-level + authentication.

    If disabled, an NTLM response (and possibly a LANMAN response) will be sent by the client, depending on the value of client lanman auth.

    Note that some sites (particularly those following 'best practice' security polices) only allow NTLMv2 responses, and not the weaker LM or NTLM.

    Default : client ntlmv2 auth = no

    client plaintext auth (G)

    Specifies whether a client should send a plaintext @@ -551,8 +547,7 @@ alias|alias|alias|alias... when a client does a queries the server, either via the network neighborhood or via net view to list what shares are available.

    If you want to set the string that is displayed next to the - machine name then see the - server string parameter.

    Default: No comment string

    Example: comment = Fred's Files

    config file (G)

    This allows you to override the config file + machine name then see the parameter.

    Default: No comment string

    Example: comment = Fred's Files

    config file (G)

    This allows you to override the config file to use, instead of the default (usually smb.conf). There is a chicken and egg problem here as this option is set in the config file!

    For this reason, if the name of the config file has changed @@ -567,8 +562,7 @@ alias|alias|alias|alias... create similar services easily. Note that the service being copied must occur earlier in the configuration file than the service doing the copying.

    Default: no value

    Example: copy = otherservice

    create mask (S)

    A synonym for this parameter is - create mode - .

    When a file is created, the necessary permissions are + .

    When a file is created, the necessary permissions are calculated according to the mapping from DOS modes to UNIX permissions, and the resulting UNIX mode is then bit-wise 'AND'ed with this parameter. This parameter may be thought of as a bit-wise @@ -576,20 +570,13 @@ alias|alias|alias|alias... set here will be removed from the modes set on a file when it is created.

    The default value of this parameter removes the 'group' and 'other' write and execute bits from the UNIX modes.

    Following this Samba will bit-wise 'OR' the UNIX mode created - from this parameter with the value of the - force create mode + from this parameter with the value of the parameter which is set to 000 by default.

    This parameter does not affect directory modes. See the - parameter directory mode - for details.

    See also the force - create mode parameter for forcing particular mode - bits to be set on created files. See also the - directory mode parameter for masking - mode bits on created directories. See also the - inherit permissions parameter.

    Note that this parameter does not apply to permissions + parameter for details.

    See also the parameter for forcing particular mode + bits to be set on created files. See also the parameter for masking + mode bits on created directories. See also the parameter.

    Note that this parameter does not apply to permissions set by Windows NT/2000 ACL editors. If the administrator wishes to enforce - a mask on access control lists also, they need to set the - security mask.

    Default: create mask = 0744

    Example: create mask = 0775

    create mode (S)

    This is a synonym for - create mask.

    csc policy (S)

    This stands for client-side caching + a mask on access control lists also, they need to set the .

    Default: create mask = 0744

    Example: create mask = 0775

    create mode (S)

    This is a synonym for .

    csc policy (S)

    This stands for client-side caching policy, and specifies how clients capable of offline caching will cache the files in the share. The valid values are: manual, documents, programs, disable.

    These values correspond to those used on Windows servers.

    For example, shares containing roaming profiles can have @@ -604,28 +591,20 @@ alias|alias|alias|alias... should be performed.

    Default: deadtime = 0

    Example: deadtime = 15

    debug hires timestamp (G)

    Sometimes the timestamps in the log messages are needed with a resolution of higher that seconds, this boolean parameter adds microsecond resolution to the timestamp - message header when turned on.

    Note that the parameter - debug timestamp must be on for this to have an - effect.

    Default: debug hires timestamp = no

    debuglevel (G)

    Synonym for - log level.

    debug pid (G)

    When using only one log file for more then one forked + message header when turned on.

    Note that the parameter must be on for this to have an + effect.

    Default: debug hires timestamp = no

    debuglevel (G)

    Synonym for .

    debug pid (G)

    When using only one log file for more then one forked smbd(8)-process there may be hard to follow which process outputs which message. This boolean parameter is adds the process-id to the timestamp message headers in the - logfile when turned on.

    Note that the parameter - debug timestamp must be on for this to have an + logfile when turned on.

    Note that the parameter must be on for this to have an effect.

    Default: debug pid = no

    debug timestamp (G)

    Samba debug log messages are timestamped - by default. If you are running at a high - debug level these timestamps + by default. If you are running at a high these timestamps can be distracting. This boolean parameter allows timestamping to be turned off.

    Default: debug timestamp = yes

    debug uid (G)

    Samba is sometimes run as root and sometime run as the connected user, this boolean parameter inserts the current euid, egid, uid and gid to the timestamp message headers - in the log file if turned on.

    Note that the parameter - debug timestamp must be on for this to have an - effect.

    Default: debug uid = no

    default (G)

    A synonym for - default service.

    default case (S)

    See the section on - NAME MANGLING. Also note the - short preserve case parameter.

    Default: default case = lower

    default devmode (S)

    This parameter is only applicable to printable services. + in the log file if turned on.

    Note that the parameter must be on for this to have an + effect.

    Default: debug uid = no

    default (G)

    A synonym for .

    default case (S)

    See the section on . Also note the parameter.

    Default: default case = lower

    default devmode (S)

    This parameter is only applicable to services. When smbd is serving Printer Drivers to Windows NT/2k/XP clients, each printer on the Samba server has a Device Mode which defines things such as paper size and orientation and duplex settings. The device mode can only correctly be @@ -645,15 +624,13 @@ alias|alias|alias|alias... do this all the time, setting default devmode = yes will instruct smbd to generate a default one.

    For more information on Windows NT/2k printing and Device Modes, - see the MSDN documentation. + see the MSDN documentation.

    Default: default devmode = no

    default service (G)

    This parameter specifies the name of a service which will be connected to if the service actually requested cannot be found. Note that the square brackets are NOT given in the parameter value (see example below).

    There is no default value for this parameter. If this parameter is not given, attempting to connect to a nonexistent - service results in an error.

    Typically the default service would be a - guest ok, - read-only service.

    Also note that the apparent service name will be changed + service results in an error.

    Typically the default service would be a , service.

    Also note that the apparent service name will be changed to equal that of the requested service, this is very useful as it allows you to use macros like %S to make a wildcard service.

    Note also that any "_" characters in the name of the service @@ -682,11 +659,8 @@ alias|alias|alias|alias... been executed, smbd will reparse the smb.conf to associated printer no longer exists. If the sharename is still valid, then smbd - will return an ACCESS_DENIED error to the client.

    See also - addprinter command, - printing, - show add - printer wizard

    Default: none

    Example: deleteprinter command = /usr/bin/removeprinter

    delete readonly (S)

    This parameter allows readonly files to be deleted. + will return an ACCESS_DENIED error to the client.

    See also , , +

    Default: none

    Example: deleteprinter command = /usr/bin/removeprinter

    delete readonly (S)

    This parameter allows readonly files to be deleted. This is not normal DOS semantics, but is allowed by UNIX.

    This option may be useful for running applications such as rcs, where UNIX file ownership prevents changing file permissions, and DOS semantics prevent deletion of a read only file.

    Default: delete readonly = no

    delete share command (G)

    Samba 2.2.0 introduced the ability to dynamically @@ -706,12 +680,9 @@ alias|alias|alias|alias... the existing service.

    This parameter is only used to remove file shares. To delete printer shares, - see the deleteprinter - command. + see the .

    - See also add share - command, change - share command. + See also , .

    Default: none

    Example: delete share command = /usr/local/bin/delshare

    delete user from group script (G)

    Full path to the script that will be called when a user is removed from a group using the Windows NT domain administration tools. It will be run by smbd(8) AS ROOT. @@ -724,7 +695,7 @@ alias|alias|alias|alias... from the server, normally using 'User Manager for Domains' or rpcclient.

    This script should delete the given UNIX username.

    Default: delete user script = <empty string>

    Example: delete user script = /usr/local/samba/bin/del_user %u

    delete veto files (S)

    This option is used when Samba is attempting to delete a directory that contains one or more vetoed directories - (see the veto files + (see the option). If this option is set to no (the default) then if a vetoed directory contains any non-vetoed files or directories then the directory delete will fail. This is usually what you want.

    If this option is set to yes, then Samba @@ -734,9 +705,7 @@ alias|alias|alias|alias... directories you might normally veto DOS/Windows users from seeing (e.g. .AppleDouble)

    Setting delete veto files = yes allows these directories to be transparently deleted when the parent directory - is deleted (so long as the user has permissions to do so).

    See also the veto - files parameter.

    Default: delete veto files = no

    deny hosts (S)

    Synonym for hosts - deny.

    dfree command (G)

    The dfree command setting + is deleted (so long as the user has permissions to do so).

    See also the parameter.

    Default: delete veto files = no

    deny hosts (S)

    Synonym for .

    dfree command (G)

    The dfree command setting should only be used on systems where a problem occurs with the internal disk space calculations. This has been known to happen with Ultrix, but may occur with other operating systems. The @@ -759,7 +728,7 @@ df $1 | tail -1 | awk '{print $2" "$4}'

    or perhaps (on Sys V based systems):

     
     #!/bin/sh
     /usr/bin/df -k $1 | tail -1 | awk '{print $3" "$5}'
    -

    Note that you may have to replace the command names with full path names on some systems.

    directory (S)

    Synonym for path.

    directory mask (S)

    This parameter is the octal modes which are +

    Note that you may have to replace the command names with full path names on some systems.

    directory (S)

    Synonym for .

    directory mask (S)

    This parameter is the octal modes which are used when converting DOS modes to UNIX modes when creating UNIX directories.

    When a directory is created, the necessary permissions are calculated according to the mapping from DOS modes to UNIX permissions, @@ -770,19 +739,12 @@ df $1 | tail -1 | awk '{print $2" "$4}' created.

    The default value of this parameter removes the 'group' and 'other' write bits from the UNIX mode, allowing only the user who owns the directory to modify it.

    Following this Samba will bit-wise 'OR' the UNIX mode - created from this parameter with the value of the - force directory mode parameter. + created from this parameter with the value of the parameter. This parameter is set to 000 by default (i.e. no extra mode bits are added).

    Note that this parameter does not apply to permissions set by Windows NT/2000 ACL editors. If the administrator wishes to enforce - a mask on access control lists also, they need to set the - directory security mask.

    See the force - directory mode parameter to cause particular mode - bits to always be set on created directories.

    See also the create mode - parameter for masking mode bits on created files, - and the directory - security mask parameter.

    Also refer to the - inherit permissions parameter.

    Default: directory mask = 0755

    Example: directory mask = 0775

    directory mode (S)

    Synonym for - directory mask

    directory security mask (S)

    This parameter controls what UNIX permission bits + a mask on access control lists also, they need to set the .

    See the parameter to cause particular mode + bits to always be set on created directories.

    See also the parameter for masking mode bits on created files, + and the parameter.

    Also refer to the parameter.

    Default: directory mask = 0755

    Example: directory mask = 0775

    directory mode (S)

    Synonym for

    directory security mask (S)

    This parameter controls what UNIX permission bits can be modified when a Windows NT client is manipulating the UNIX permission on a directory using the native NT security dialog box.

    This parameter is applied as a mask (AND'ed with) to @@ -795,11 +757,8 @@ df $1 | tail -1 | awk '{print $2" "$4}' Samba server through other means can easily bypass this restriction, so it is primarily useful for standalone "appliance" systems. Administrators of most normal systems will probably want to leave - it as the default of 0777.

    See also the - force directory security mode, - security mask, - force security mode - parameters.

    Default: directory security mask = 0777

    Example: directory security mask = 0700

    disable netbios (G)

    Enabling this parameter will disable netbios support + it as the default of 0777.

    See also the , , + parameters.

    Default: directory security mask = 0777

    Example: directory security mask = 0700

    disable netbios (G)

    Enabling this parameter will disable netbios support in Samba. Netbios is the only available form of browsing in all windows versions except for 2000 and XP.

    Note

    Note that clients that only support netbios won't be able to see your samba server when netbios support is disabled. @@ -813,7 +772,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' also disable the capability of Windows NT/2000 clients to download print drivers from the Samba host upon demand. Be very careful about enabling this parameter. -

    See also use client driver +

    See also

    Default : disable spoolss = no

    display charset (G)

    Specifies the charset that samba will use to print messages to stdout and stderr and SWAT will use. Should generally be the same as the unix charset. @@ -824,17 +783,14 @@ df $1 | tail -1 | awk '{print $2" "$4}' characters, so the DNS name (or DNS alias) can likewise only be 15 characters, maximum.

    nmbd spawns a second copy of itself to do the DNS name lookup requests, as doing a name lookup is a blocking - action.

    See also the parameter - wins support.

    Default: dns proxy = yes

    domain logons (G)

    If set to yes, the Samba server will serve - Windows 95/98 Domain logons for the - workgroup it is in. Samba 2.2 + action.

    See also the parameter .

    Default: dns proxy = yes

    domain logons (G)

    If set to yes, the Samba server will serve + Windows 95/98 Domain logons for the it is in. Samba 2.2 has limited capability to act as a domain controller for Windows NT 4 Domains. For more details on setting up this feature see the Samba-PDC-HOWTO included in the Samba documentation.

    Default: domain logons = no

    domain master (G)

    Tell smbd(8) to enable WAN-wide browse list collation. Setting this option causes nmbd to claim a special domain specific NetBIOS name that identifies - it as a domain master browser for its given - workgroup. Local master browsers + it as a domain master browser for its given . Local master browsers in the same workgroup on broadcast-isolated subnets will give this nmbd their local browse lists, and then ask smbd(8) for a complete copy of the browse @@ -848,8 +804,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' means that if this parameter is set and nmbd claims the special name for a workgroup before a Windows NT PDC is able to do so then cross subnet browsing will behave - strangely and may fail.

    If domain logons = yes - , then the default behavior is to enable the domain + strangely and may fail.

    If , then the default behavior is to enable the domain master parameter. If domain logons is not enabled (the default setting), then neither will domain master be enabled by default.

    Default: domain master = auto

    dont descend (S)

    There are certain directories on some systems @@ -908,7 +863,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' Samba see the chapter "User Database" in the Samba HOWTO Collection.

    In order for encrypted passwords to work correctly smbd(8) must either have access to a local smbpasswd(5) file (see the smbpasswd(8) program for information on how to set up - and maintain this file), or set the security = [server|domain|ads] parameter which + and maintain this file), or set the parameter which causes smbd to authenticate against another server.

    Default: encrypt passwords = yes

    enhanced browsing (G)

    This option enables a couple of enhancements to cross-subnet browse propagation that have been added in Samba @@ -934,8 +889,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' can define enumports command to point to a program which should generate a list of ports, one per line, to standard output. This listing will then be used in response - to the level 1 and 2 EnumPorts() RPC.

    Default: no enumports command

    Example: enumports command = /usr/bin/listports

    exec (S)

    This is a synonym for - preexec.

    fake directory create times (S)

    NTFS and Windows VFAT file systems keep a create + to the level 1 and 2 EnumPorts() RPC.

    Default: no enumports command

    Example: enumports command = /usr/bin/listports

    exec (S)

    This is a synonym for .

    fake directory create times (S)

    NTFS and Windows VFAT file systems keep a create time for all files and directories. This is not the same as the ctime - status change time - that Unix keeps, so Samba by default reports the earliest of the various times Unix does keep. Setting @@ -962,8 +916,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' cache file data. With some oplock types the client may even cache file open/close operations. This can give enormous performance benefits.

    When you set fake oplocks = yes, smbd(8) will - always grant oplock requests no matter how many clients are using the file.

    It is generally much better to use the real - oplocks support rather + always grant oplock requests no matter how many clients are using the file.

    It is generally much better to use the real support rather than this parameter.

    If you enable this option on all read-only shares or shares that you know will only be accessed from one client at a time such as physically read-only media like CDROMs, you will see @@ -986,9 +939,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' permissions changed. The default for this parameter is (in octal) 000. The modes in this parameter are bitwise 'OR'ed onto the file mode after the mask set in the create mask - parameter is applied.

    See also the parameter create - mask for details on masking mode bits on files.

    See also the inherit - permissions parameter.

    Default: force create mode = 000

    Example: force create mode = 0755

    would force all created files to have read and execute + parameter is applied.

    See also the parameter for details on masking mode bits on files.

    See also the parameter.

    Default: force create mode = 000

    Example: force create mode = 0755

    would force all created files to have read and execute permissions set for 'group' and 'other' as well as the read/write/execute bits set for the 'user'.

    force directory mode (S)

    This parameter specifies a set of UNIX mode bit permissions that will always be set on a directory @@ -997,10 +948,8 @@ df $1 | tail -1 | awk '{print $2" "$4}' parameter is (in octal) 0000 which will not add any extra permission bits to a created directory. This operation is done after the mode mask in the parameter directory mask is - applied.

    See also the parameter - directory mask for details on masking mode bits - on created directories.

    See also the - inherit permissions parameter.

    Default: force directory mode = 000

    Example: force directory mode = 0755

    would force all created directories to have read and execute + applied.

    See also the parameter for details on masking mode bits + on created directories.

    See also the parameter.

    Default: force directory mode = 000

    Example: force directory mode = 0755

    would force all created directories to have read and execute permissions set for 'group' and 'other' as well as the read/write/execute bits set for the 'user'.

    force directory security mode (S)

    This parameter controls what UNIX permission bits can be modified when a Windows NT client is manipulating the UNIX @@ -1014,11 +963,8 @@ df $1 | tail -1 | awk '{print $2" "$4}' Samba server through other means can easily bypass this restriction, so it is primarily useful for standalone "appliance" systems. Administrators of most normal systems will probably want to leave - it set as 0000.

    See also the - directory security mask, - security mask, - force security mode - parameters.

    Default: force directory security mode = 0

    Example: force directory security mode = 700

    force group (S)

    This specifies a UNIX group name that will be + it set as 0000.

    See also the , , + parameters.

    Default: force directory security mode = 0

    Example: force directory security mode = 700

    force group (S)

    This specifies a UNIX group name that will be assigned as the default primary group for all users connecting to this service. This is useful for sharing files by ensuring that all access to files on service will use the named group for @@ -1035,10 +981,9 @@ df $1 | tail -1 | awk '{print $2" "$4}' example, the setting force group = +sys means that only users who are already in group sys will have their default primary group assigned to sys when accessing this Samba share. All - other users will retain their ordinary primary group.

    If the force user - parameter is also set the group specified in + other users will retain their ordinary primary group.

    If the parameter is also set the group specified in force group will override the primary group - set in force user.

    See also force user.

    Default: no forced group

    Example: force group = agroup

    force security mode (S)

    This parameter controls what UNIX permission + set in force user.

    See also .

    Default: no forced group

    Example: force group = agroup

    force security mode (S)

    This parameter controls what UNIX permission bits can be modified when a Windows NT client is manipulating the UNIX permission on a file using the native NT security dialog box.

    This parameter is applied as a mask (OR'ed with) to the @@ -1051,11 +996,8 @@ df $1 | tail -1 | awk '{print $2" "$4}' the Samba server through other means can easily bypass this restriction, so it is primarily useful for standalone "appliance" systems. Administrators of most normal systems will probably want to leave - this set to 0000.

    See also the - force directory security mode, - directory security - mask, - security mask parameters.

    Default: force security mode = 0

    Example: force security mode = 700

    force user (S)

    This specifies a UNIX user name that will be + this set to 0000.

    See also the , + , parameters.

    Default: force security mode = 0

    Example: force security mode = 700

    force user (S)

    This specifies a UNIX user name that will be assigned as the default user for all users connecting to this service. This is useful for sharing files. You should also use it carefully as using it incorrectly can cause security problems.

    This user name only gets used once a connection is established. @@ -1065,7 +1007,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' as. This can be very useful.

    In Samba 2.0.5 and above this parameter also causes the primary group of the forced user to be used as the primary group for all file activity. Prior to 2.0.5 the primary group was left - as the primary group of the connecting user (this was a bug).

    See also force group

    Default: no forced user

    Example: force user = auser

    fstype (S)

    This parameter allows the administrator to + as the primary group of the connecting user (this was a bug).

    See also

    Default: no forced user

    Example: force user = auser

    fstype (S)

    This parameter allows the administrator to configure the string that specifies the type of filesystem a share is using that is reported by smbd(8) when a client queries the filesystem type for a share. The default type is NTFS for @@ -1076,15 +1018,12 @@ df $1 | tail -1 | awk '{print $2" "$4}' samba can use.

    This parameter should specify the path to a script that queries the quota information for the specified user/group for the partition that - the specified directory is on.

    Such a script should take 3 arguments:

    • directory

    • type of query

    • uid of user or gid of group

    The type of query can be one of :

    • 1 - user quotas

    • 2 - user default quotas (uid = -1)

    • 3 - group quotas

    • 4 - group default quotas (gid = -1)

    This script should print its output according to the following format:

    • Line 1 - quota flags (0 = no quotas, 1 = quotas enabled, 2 = quotas enabled and enforced)

    • Line 2 - number of currently used blocks

    • Line 3 - the softlimit number of blocks

    • Line 4 - the hardlimit number of blocks

    • Line 5 - currently used number of inodes

    • Line 6 - the softlimit number of inodes

    • Line 7 - the hardlimit number of inodes

    • Line 8(optional) - the number of bytes in a block(default is 1024)

    See also the set quota command parameter. + the specified directory is on.

    Such a script should take 3 arguments:

    • directory

    • type of query

    • uid of user or gid of group

    The type of query can be one of :

    • 1 - user quotas

    • 2 - user default quotas (uid = -1)

    • 3 - group quotas

    • 4 - group default quotas (gid = -1)

    This script should print its output according to the following format:

    • Line 1 - quota flags (0 = no quotas, 1 = quotas enabled, 2 = quotas enabled and enforced)

    • Line 2 - number of currently used blocks

    • Line 3 - the softlimit number of blocks

    • Line 4 - the hardlimit number of blocks

    • Line 5 - currently used number of inodes

    • Line 6 - the softlimit number of inodes

    • Line 7 - the hardlimit number of inodes

    • Line 8(optional) - the number of bytes in a block(default is 1024)

    See also the parameter.

    Default: get quota command =

    Example: get quota command = /usr/local/sbin/query_quota

    getwd cache (G)

    This is a tuning option. When this is enabled a caching algorithm will be used to reduce the time taken for getwd() calls. This can have a significant impact on performance, especially - when the wide links - parameter is set to no.

    Default: getwd cache = yes

    group (S)

    Synonym for - force group.

    guest account (G,S)

    This is a username which will be used for access - to services which are specified as - guest ok (see below). Whatever privileges this + when the parameter is set to no.

    Default: getwd cache = yes

    group (S)

    Synonym for .

    guest account (G,S)

    This is a username which will be used for access + to services which are specified as (see below). Whatever privileges this user has will be available to any client connecting to the guest service. Typically this user will exist in the password file, but will not have a valid login. The user account "ftp" is often a good choice @@ -1099,16 +1038,11 @@ df $1 | tail -1 | awk '{print $2" "$4}' many parts of the system require this value to be constant for correct operation.

    Default: specified at compile time, usually "nobody"

    Example: guest account = ftp

    guest ok (S)

    If this parameter is yes for a service, then no password is required to connect to the service. - Privileges will be those of the - guest account.

    This paramater nullifies the benifits of setting - restrict - anonymous = 2

    See the section below on - security for more information about this option. + Privileges will be those of the .

    This paramater nullifies the benifits of setting + = 2

    See the section below on for more information about this option.

    Default: guest ok = no

    guest only (S)

    If this parameter is yes for a service, then only guest connections to the service are permitted. - This parameter will have no effect if - guest ok is not set for the service.

    See the section below on - security for more information about this option. + This parameter will have no effect if is not set for the service.

    See the section below on for more information about this option.

    Default: guest only = no

    hide dot files (S)

    This is a boolean parameter that controls whether files starting with a dot appear as hidden files.

    Default: hide dot files = yes

    hide files (S)

    This is a list of files or directories that are not visible but are accessible. The DOS 'hidden' attribute is applied @@ -1119,13 +1053,10 @@ df $1 | tail -1 | awk '{print $2" "$4}' not include the Unix directory separator '/'.

    Note that the case sensitivity option is applicable in hiding files.

    Setting this parameter will affect the performance of Samba, as it will be forced to check all files and directories for a match - as they are scanned.

    See also hide - dot files, - veto files and - case sensitive.

    Default: no file are hidden

    Example: hide files = + as they are scanned.

    See also , and .

    Default: no file are hidden

    Example: hide files = /.*/DesktopFolderDB/TrashFor%m/resource.frk/

    The above example is based on files that the Macintosh - SMB client (DAVE) available from - Thursby creates for internal use, and also still hides + SMB client (DAVE) available from + Thursby creates for internal use, and also still hides all files beginning with a dot.

    hide local users (G)

    This parameter toggles the hiding of local UNIX users (root, wheel, floppy, etc) from remote clients.

    Default: hide local users = no

    hide special files (S)

    This parameter prevents clients from seeing special files such as sockets, devices and fifo's in directory @@ -1134,8 +1065,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' existance of files that cannot be read. Defaults to off.

    Default: hide unreadable = no

    hide unwriteable files (S)

    This parameter prevents clients from seeing the existance of files that cannot be written to. Defaults to off. Note that unwriteable directories are shown as usual. -

    Default: hide unwriteable = no

    homedir map (G)

    Ifnis homedir - is yes, and smbd(8) is also acting +

    Default: hide unwriteable = no

    homedir map (G)

    If is yes, and smbd(8) is also acting as a Win95/98 logon server then this parameter specifies the NIS (or YP) map from which the server for the user's home directory should be extracted. At present, only the Sun @@ -1143,16 +1073,11 @@ df $1 | tail -1 | awk '{print $2" "$4}' the first ':'. There should probably be a better parsing system that copes with different map formats and also Amd (another automounter) maps.

    Note

    A working NIS client is required on - the system for this option to work.

    See also nis homedir - , domain logons - .

    Default: homedir map = <empty string>

    Example: homedir map = amd.homedir

    host msdfs (G)

    This boolean parameter is only available - if Samba has been configured and compiled with the - --with-msdfs option. If set to yes, - Samba will act as a Dfs server, and allow Dfs-aware clients - to browse Dfs trees hosted on the server.

    See also the - msdfs root share level parameter. For + the system for this option to work.

    See also , .

    Default: homedir map = <empty string>

    Example: homedir map = amd.homedir

    host msdfs (G)

    If set to yes, Samba will act as a Dfs + server, and allow Dfs-aware clients to browse Dfs trees hosted + on the server.

    See also the share level parameter. For more information on setting up a Dfs tree on Samba, - refer to ???. + refer to .

    Default: host msdfs = no

    hostname lookups (G)

    Specifies whether samba should use (expensive) hostname lookups or use the ip addresses instead. An example place where hostname lookups are currently used is when checking @@ -1168,8 +1093,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' page hosts_access(5). Note that this man page may not be present on your system, so a brief description will be given here also.

    Note that the localhost address 127.0.0.1 will always - be allowed access unless specifically denied by a - hosts deny option.

    You can also specify hosts by network/netmask pairs and + be allowed access unless specifically denied by a option.

    You can also specify hosts by network/netmask pairs and by netgroup names if your system supports netgroups. The EXCEPT keyword can also be used to limit a wildcard list. The following examples may provide some help:

    Example 1: allow all IPs in 150.203.*.*; except one

    hosts allow = 150.203. EXCEPT 150.203.6.66

    Example 2: allow hosts that match the given network/netmask

    hosts allow = 150.203.15.0/255.255.255.0

    Example 3: allow a couple of hosts

    hosts allow = lapland, arvidsjaur

    Example 4: allow only hosts in NIS netgroup "foonet", but @@ -1181,8 +1105,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' list takes precedence.

    Default: none (i.e., no hosts specifically excluded)

    Example: hosts deny = 150.203.4. badhost.mynet.edu.au

    hosts equiv (G)

    If this global parameter is a non-null string, it specifies the name of a file to read for the names of hosts and users who will be allowed access without specifying a password. -

    This is not be confused with - hosts allow which is about hosts +

    This is not be confused with which is about hosts access to services and is more useful for guest services. hosts equiv may be useful for NT clients which will not supply passwords to Samba.

    Note

    The use of hosts equiv @@ -1214,27 +1137,14 @@ df $1 | tail -1 | awk '{print $2" "$4}' thus guaranteeing that default directory acls are propagated.

    Default: inherit acls = no

    inherit permissions (S)

    The permissions on new files and directories - are normally governed by - create mask, - directory mask, - force create mode - and force - directory mode but the boolean inherit + are normally governed by , , and but the boolean inherit permissions parameter overrides this.

    New directories inherit the mode of the parent directory, including bits such as setgid.

    New files inherit their read/write bits from the parent directory. Their execute bits continue to be determined by - map archive - , map hidden - and map system - as usual.

    Note that the setuid bit is never set via + , and as usual.

    Note that the setuid bit is never set via inheritance (the code explicitly prohibits this).

    This can be particularly useful on large systems with many users, perhaps several thousand, to allow a single [homes] - share to be used flexibly by each user.

    See also create mask - , - directory mask, - force create mode and - force directory mode - .

    Default: inherit permissions = no

    interfaces (G)

    This option allows you to override the default + share to be used flexibly by each user.

    See also , , and .

    Default: inherit permissions = no

    interfaces (G)

    This option allows you to override the default network interfaces list that Samba will use for browsing, name registration and other NBT traffic. By default Samba will query the kernel for the list of all active interfaces and use any @@ -1249,8 +1159,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' decimal IP address or a hostname which will be looked up via the OS's normal hostname resolution mechanisms.

    For example, the following line:

    interfaces = eth0 192.168.2.10/24 192.168.3.10/255.255.255.0

    would configure three network interfaces corresponding to the eth0 device and IP addresses 192.168.2.10 and 192.168.3.10. - The netmasks of the latter two interfaces would be set to 255.255.255.0.

    See also bind - interfaces only.

    Default: all active interfaces except 127.0.0.1 + The netmasks of the latter two interfaces would be set to 255.255.255.0.

    See also .

    Default: all active interfaces except 127.0.0.1 that are broadcast capable

    invalid users (S)

    This is a list of users that should not be allowed to login to this service. This is really a paranoid check to absolutely ensure an improper setting does not breach @@ -1266,21 +1175,18 @@ df $1 | tail -1 | awk '{print $2" "$4}' the value &+group means check the NIS netgroup database, followed by the UNIX group database (the same as the '@' prefix).

    The current servicename is substituted for %S. - This is useful in the [homes] section.

    See also valid users - .

    Default: no invalid users

    Example: invalid users = root fred admin @wheel

    keepalive (G)

    The value of the parameter (an integer) represents + This is useful in the [homes] section.

    See also .

    Default: no invalid users

    Example: invalid users = root fred admin @wheel

    keepalive (G)

    The value of the parameter (an integer) represents the number of seconds between keepalive packets. If this parameter is zero, no keepalive packets will be sent. Keepalive packets, if sent, allow the server to tell whether a client is still present and responding.

    Keepalives should, in general, not be needed if the socket - being used has the SO_KEEPALIVE attribute set on it (see - socket options). + being used has the SO_KEEPALIVE attribute set on it (see ). Basically you should only use this option if you strike difficulties.

    Default: keepalive = 300

    Example: keepalive = 600

    kernel change notify (G)

    This parameter specifies whether Samba should ask the kernel for change notifications in directories so that SMB clients can refresh whenever the data on the server changes.

    This parameter is only usd when your kernel supports change notification to user programs, using the F_NOTIFY fcntl. -

    Default: Yes

    kernel oplocks (G)

    For UNIXes that support kernel based - oplocks +

    Default: Yes

    kernel oplocks (G)

    For UNIXes that support kernel based (currently only IRIX and the Linux 2.4 kernel), this parameter allows the use of them to be turned on or off.

    Kernel oplocks support allows Samba oplocks to be broken whenever a local UNIX process or NFS operation @@ -1288,9 +1194,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' data consistency between SMB/CIFS, NFS and local file access (and is a very cool feature :-).

    This parameter defaults to on, but is translated to a no-op on systems that no not have the necessary kernel support. - You should never need to touch this parameter.

    See also the oplocks - and level2 oplocks - parameters.

    Default: kernel oplocks = yes

    lanman auth (G)

    This parameter determines whether or not smbd(8) will attempt to authenticate users + You should never need to touch this parameter.

    See also the and parameters.

    Default: kernel oplocks = yes

    lanman auth (G)

    This parameter determines whether or not smbd(8) will attempt to authenticate users using the LANMAN password hash. If disabled, only clients which support NT password hashes (e.g. Windows NT/2000 clients, smbclient, etc... but not Windows 95/98 or the MS DOS network client) will be able to connect to the Samba host.

    The LANMAN encrypted response is easily broken, due to it's @@ -1329,7 +1233,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' If this parameter is unset, the value of ldap suffix will be used instead.

    Default: none

    Example: dc=samba,ou=Groups

    ldap idmap suffix (G)

    This parameters specifies the suffix that is used when storing idmap mappings. If this parameter is unset, the value of ldap suffix - will be used instead.

    Default: none

    Example: dc=samba,ou=Idmap

    ldap machine suffix (G)

    It specifies where machines should be added to the ldap tree.

    Default: none

    ldap passwd sync (G)

    This option is used to define whether + will be used instead.

    Default: none

    Example: ou=Idmap,dc=samba,dc=org

    ldap machine suffix (G)

    It specifies where machines should be added to the ldap tree.

    Default: none

    ldap passwd sync (G)

    This option is used to define whether or not Samba should sync the LDAP password with the NT and LM hashes for normal accounts (NOT for workstation, server or domain trusts) on a password @@ -1341,8 +1245,8 @@ df $1 | tail -1 | awk '{print $2" "$4}' the LDAP password and let the LDAP server do the rest.

    Default: ldap passwd sync = no

    ldap port (G)

    This parameter is only available if Samba has been configure to include the --with-ldapsam option at compile time.

    This option is used to control the tcp port number used to contact - the ldap server. - The default is to use the stand LDAPS port 636.

    See Also: ldap ssl

    Default : ldap port = 636 ; if ldap ssl = on

    Default : ldap port = 389 ; if ldap ssl = off

    ldap server (G)

    This parameter is only available if Samba has been + the . + The default is to use the stand LDAPS port 636.

    See Also:

    Default : ldap port = 636 ; if ldap ssl = on

    Default : ldap port = 389 ; if ldap ssl = off

    ldap server (G)

    This parameter is only available if Samba has been configure to include the --with-ldapsam option at compile time.

    This parameter should contain the FQDN of the ldap directory server which should be queried to locate user account information. @@ -1357,7 +1261,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' communicating with the directory server.

  • On = Use SSL on the ldaps port when contacting the ldap server. Only available when the backwards-compatiblity --with-ldapsam option is specified - to configure. See passdb backend

  • Default : ldap ssl = start_tls

    ldap suffix (G)

    Specifies where user and machine accounts are added to the + to configure. See

    Default : ldap ssl = start_tls

    ldap suffix (G)

    Specifies where user and machine accounts are added to the tree. Can be overriden by ldap user suffix and ldap machine suffix. It also used as the base dn for all ldap @@ -1375,14 +1279,10 @@ df $1 | tail -1 | awk '{print $2" "$4}' writes to the file all clients are notified (no reply is needed or waited for) and told to break their oplocks to "none" and delete any read-ahead caches.

    It is recommended that this parameter be turned on to - speed access to shared executables.

    For more discussions on level2 oplocks see the CIFS spec.

    Currently, if kernel - oplocks are supported then level2 oplocks are + speed access to shared executables.

    For more discussions on level2 oplocks see the CIFS spec.

    Currently, if are supported then level2 oplocks are not granted (even if this parameter is set to yes). - Note also, the oplocks - parameter must be set to yes on this share in order for - this parameter to have any effect.

    See also the oplocks - and kernel oplocks - parameters.

    Default: level2 oplocks = yes

    lm announce (G)

    This parameter determines if nmbd(8) will produce Lanman announce + Note also, the parameter must be set to yes on this share in order for + this parameter to have any effect.

    See also the and parameters.

    Default: level2 oplocks = yes

    lm announce (G)

    This parameter determines if nmbd(8) will produce Lanman announce broadcasts that are needed by OS/2 clients in order for them to see the Samba server in their browse list. This parameter can have three values, yes, no, or @@ -1394,15 +1294,14 @@ df $1 | tail -1 | awk '{print $2" "$4}' Samba will not send Lanman announce broadcasts by default but will listen for them. If it hears such a broadcast on the wire it will then start sending them at a frequency set by the parameter - lm interval.

    See also lm interval.

    Default: lm announce = auto

    Example: lm announce = yes

    lm interval (G)

    If Samba is set to produce Lanman announce - broadcasts needed by OS/2 clients (see the - lm announce parameter) then this + lm interval.

    See also .

    Default: lm announce = auto

    Example: lm announce = yes

    lm interval (G)

    If Samba is set to produce Lanman announce + broadcasts needed by OS/2 clients (see the parameter) then this parameter defines the frequency in seconds with which they will be made. If this is set to zero then no Lanman announcements will be made despite the setting of the lm announce - parameter.

    See also lm announce.

    Default: lm interval = 60

    Example: lm interval = 120

    load printers (G)

    A boolean variable that controls whether all + parameter.

    See also .

    Default: lm interval = 60

    Example: lm interval = 120

    load printers (G)

    A boolean variable that controls whether all printers in the printcap will be loaded for browsing by default. - See the printers section for + See the section for more details.

    Default: load printers = yes

    local master (G)

    This option allows nmbd(8) to try and become a local master browser on a subnet. If set to no then nmbd will not attempt to become a local master browser @@ -1411,12 +1310,10 @@ df $1 | tail -1 | awk '{print $2" "$4}' yes doesn't mean that Samba will become the local master browser on a subnet, just that nmbd will participate in elections for local master browser.

    Setting this value to no will cause nmbd never to become a local - master browser.

    Default: local master = yes

    lock dir (G)

    Synonym for - lock directory. + master browser.

    Default: local master = yes

    lock dir (G)

    Synonym for .

    lock directory (G)

    This option specifies the directory where lock files will be placed. The lock files are used to implement the - max connections - option.

    Default: lock directory = ${prefix}/var/locks

    Example: lock directory = /var/run/samba/locks

    locking (S)

    This controls whether or not locking will be + option.

    Default: lock directory = ${prefix}/var/locks

    Example: lock directory = /var/run/samba/locks

    locking (S)

    This controls whether or not locking will be performed by the server in response to lock requests from the client.

    If locking = no, all lock and unlock requests will appear to succeed and all lock queries will report @@ -1436,8 +1333,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' and FoxPro.

    Default: lock spin count = 3

    lock spin time (G)

    The time in microseconds that smbd should pause before attempting to gain a failed lock. See - lock spin - count for more details.

    Default: lock spin time = 10

    log file (G)

    This option allows you to override the name + for more details.

    Default: lock spin time = 10

    log file (G)

    This option allows you to override the name of the Samba log file (also known as the debug file).

    This option takes the standard substitutions, allowing you to have separate log files for each user or machine.

    Example: log file = /usr/local/samba/var/log.%m

    log level (G)

    The value of the parameter (a astring) allows the debug level (logging level) to be specified in the @@ -1446,8 +1342,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' level for multiple debug classes. This is to give greater flexibility in the configuration of the system.

    The default will be the log level specified on the command line or level zero if none was specified.

    Example: log level = 3 passdb:5 auth:10 winbind:2

    logon drive (G)

    This parameter specifies the local path to - which the home directory will be connected (see - logon home) + which the home directory will be connected (see ) and is only used by NT Workstations.

    Note that this option is only useful if Samba is set up as a logon server.

    Default: logon drive = z:

    Example: logon drive = h:

    logon home (G)

    This parameter specifies the home directory location when a Win95/98 or NT Workstation logs into a Samba PDC. @@ -1460,8 +1355,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' substitutions made when a client requests the info, generally in a NetUserGetInfo request. Win9X clients truncate the info to \\server\share when a user does net use /home - but use the whole string when dealing with profiles.

    Note that in prior versions of Samba, the - logon path was returned rather than + but use the whole string when dealing with profiles.

    Note that in prior versions of Samba, the was returned rather than logon home. This broke net use /home but allowed profiles outside the home directory. The current implementation is correct, and can be used for profiles if you use the above trick.

    This option is only useful if Samba is set up as a logon @@ -1469,8 +1363,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' where roaming profiles (NTuser.dat etc files for Windows NT) are stored. Contrary to previous versions of these manual pages, it has nothing to do with Win 9X roaming profiles. To find out how to - handle roaming profiles for Win 9X system, see the - logon home parameter.

    This option takes the standard substitutions, allowing you + handle roaming profiles for Win 9X system, see the parameter.

    This option takes the standard substitutions, allowing you to have separate logon scripts for each user or machine. It also specifies the directory from which the "Application Data", (desktop, start menu, @@ -1495,8 +1388,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' a user successfully logs in. The file must contain the DOS style CR/LF line endings. Using a DOS-style editor to create the file is recommended.

    The script must be a relative path to the [netlogon] - service. If the [netlogon] service specifies a - path of /usr/local/samba/netlogon, and logon script = STARTUP.BAT, then + service. If the [netlogon] service specifies a of /usr/local/samba/netlogon, and logon script = STARTUP.BAT, then the file that will be downloaded is:

    /usr/local/samba/netlogon/STARTUP.BAT

    The contents of the batch file are entirely your choice. A suggested command would be to add NET TIME \\SERVER /SET /YES, to force every machine to synchronize clocks with @@ -1521,8 +1413,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' if the job priority is lower than the set fence priority it will have the PAUSED status, whereas if the priority is equal or higher it will have the SPOOLED or PRINTING status.

    Note that it is good practice to include the absolute path - in the lppause command as the PATH may not be available to the server.

    See also the printing - parameter.

    Default: Currently no default value is given to + in the lppause command as the PATH may not be available to the server.

    See also the parameter.

    Default: Currently no default value is given to this string, unless the value of the printing parameter is SYSV, in which case the default is :

    lp -i %p-%j -H hold

    or if the value of the printing parameter is SOFTQ, then the default is:

    qstat -s -j%j -h

    Example for HPUX: lppause command = /usr/bin/lpalt %p-%j -p0

    lpq cache time (G)

    This controls how long lpq info will be cached @@ -1534,7 +1425,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' where xxxx is a hash of the lpq command in use.

    The default is 10 seconds, meaning that the cached results of a previous identical lpq command will be used if the cached data is less than 10 seconds old. A large value may - be advisable if your lpq command is very slow.

    A value of 0 will disable caching completely.

    See also the printing parameter.

    Default: lpq cache time = 10

    Example: lpq cache time = 30

    lpq command (S)

    This parameter specifies the command to be + be advisable if your lpq command is very slow.

    A value of 0 will disable caching completely.

    See also the parameter.

    Default: lpq cache time = 10

    Example: lpq cache time = 30

    lpq command (S)

    This parameter specifies the command to be executed on the server host in order to obtain lpq -style printer status information.

    This command should be a program or script which takes a printer name as its only parameter and outputs printer @@ -1552,19 +1443,16 @@ df $1 | tail -1 | awk '{print $2" "$4}' may not be available to the server. When compiled with the CUPS libraries, no lpq command is needed because smbd will make a library call to obtain the - print queue listing.

    See also the printing - parameter.

    Default: depends on the setting of + print queue listing.

    See also the parameter.

    Default: depends on the setting of printing

    Example: lpq command = /usr/bin/lpq -P%p

    lpresume command (S)

    This parameter specifies the command to be executed on the server host in order to restart or continue printing or spooling a specific print job.

    This command should be a program or script which takes a printer name and job number to resume the print job. See - also the lppause command - parameter.

    If a %p is given then the printer name + also the parameter.

    If a %p is given then the printer name is put in its place. A %j is replaced with the job number (an integer).

    Note that it is good practice to include the absolute path in the lpresume command as the PATH may not - be available to the server.

    See also the printing - parameter.

    Default: Currently no default value is given + be available to the server.

    See also the parameter.

    Default: Currently no default value is given to this string, unless the value of the printing parameter is SYSV, in which case the default is :

    lp -i %p-%j -H resume

    or if the value of the printing parameter is SOFTQ, then the default is:

    qstat -s -j%j -r

    Example for HPUX: lpresume command = /usr/bin/lpalt %p-%j -p2

    lprm command (S)

    This parameter specifies the command to be @@ -1573,19 +1461,17 @@ df $1 | tail -1 | awk '{print $2" "$4}' is put in its place. A %j is replaced with the job number (an integer).

    Note that it is good practice to include the absolute path in the lprm command as the PATH may not be - available to the server.

    See also the printing - parameter.

    Default: depends on the setting of printing + available to the server.

    See also the parameter.

    Default: depends on the setting of printing

    Example 1: lprm command = /usr/bin/lprm -P%p %j

    Example 2: lprm command = /usr/bin/cancel %p-%j

    machine password timeout (G)

    If a Samba server is a member of a Windows - NT Domain (see the security = domain) + NT Domain (see the ) parameter) then periodically a running smbd process will try and change the MACHINE ACCOUNT PASSWORD stored in the TDB called private/secrets.tdb . This parameter specifies how often this password will be changed, in seconds. The default is one week (expressed in - seconds), the same as a Windows NT Domain member server.

    See also smbpasswd(8), and the - security = domain) parameter.

    Default: machine password timeout = 604800

    magic output (S)

    This parameter specifies the name of a file + seconds), the same as a Windows NT Domain member server.

    See also smbpasswd(8), and the ) parameter.

    Default: machine password timeout = 604800

    magic output (S)

    This parameter specifies the name of a file which will contain output created by a magic script (see the - magic script + parameter below).

    Warning: If two clients use the same magic script in the same directory the output file content is undefined.

    Default: magic output = <magic script name>.out

    Example: magic output = myfile.txt

    magic script (S)

    This parameter specifies the name of a file which, @@ -1594,13 +1480,12 @@ df $1 | tail -1 | awk '{print $2" "$4}' executed on behalf of the connected user.

    Scripts executed in this way will be deleted upon completion assuming that the user has the appropriate level of privilege and the file permissions allow the deletion.

    If the script generates output, output will be sent to - the file specified by the - magic output parameter (see above).

    Note that some shells are unable to interpret scripts + the file specified by the parameter (see above).

    Note that some shells are unable to interpret scripts containing CR/LF instead of CR as the end-of-line marker. Magic scripts must be executable as is on the host, which for some hosts and some shells will require filtering at the DOS end.

    Magic scripts are EXPERIMENTAL and - should NOT be relied upon.

    Default: None. Magic scripts disabled.

    Example: magic script = user.csh

    mangle case (S)

    See the section on NAME MANGLING

    Default: mangle case = no

    mangled map (S)

    This is for those who want to directly map UNIX + should NOT be relied upon.

    Default: None. Magic scripts disabled.

    Example: magic script = user.csh

    mangle case (S)

    See the section on

    Default: mangle case = no

    mangled map (S)

    This is for those who want to directly map UNIX file names which cannot be represented on Windows/DOS. The mangling of names is not always what is needed. In particular you may have documents with file extensions that differ between DOS and UNIX. @@ -1611,7 +1496,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' off the ends of filenames on some CDROMs (only visible under some UNIXes). To do this use a map of (*;1 *;).

    Default: no mangled map

    Example: mangled map = (*;1 *;)

    mangled names (S)

    This controls whether non-DOS names under UNIX should be mapped to DOS-compatible names ("mangled") and made visible, - or whether non-DOS names should simply be ignored.

    See the section on NAME MANGLING for + or whether non-DOS names should simply be ignored.

    See the section on for details on how to control the mangling process.

    If mangling is used then the mangling algorithm is as follows:

    • The first (up to) five alphanumeric characters before the rightmost dot of the filename are preserved, forced to upper case, and appear as the first (up to) five characters @@ -1621,8 +1506,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' extension). The final extension is included in the hash calculation only if it contains any upper case characters or is longer than three characters.

      Note that the character to use may be specified using - the mangling char - option, if you don't like '~'.

    • The first three alphanumeric characters of the final + the option, if you don't like '~'.

    • The first three alphanumeric characters of the final extension are preserved, forced to upper case and appear as the extension of the mangled name. The final extension is defined as that part of the original filename after the rightmost dot. If there are no @@ -1652,7 +1536,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' value is 1 and the maximum value is 6.

      mangle prefix is effective only when mangling method is hash2.

      Default: mangle prefix = 1

      Example: mangle prefix = 4

    mangling char (S)

    This controls what character is used as - the magic character in name mangling. The + the magic character in . The default is a '~' but this may interfere with some software. Use this option to set it to whatever you prefer. This is effective only when mangling method is hash.

    Default: mangling char = ~

    Example: mangling char = ^

    mangling method (G)

    controls the algorithm used for the generating the mangled names. Can take two different values, "hash" and @@ -1674,17 +1558,13 @@ df $1 | tail -1 | awk '{print $2" "$4}' any file it touches from becoming executable under UNIX. This can be quite annoying for shared source code, documents, etc...

    Note that this requires the create mask parameter to be set such that owner execute bit is not masked out - (i.e. it must include 100). See the parameter - create mask for details.

    Default: map archive = yes

    map hidden (S)

    This controls whether DOS style hidden files + (i.e. it must include 100). See the parameter for details.

    Default: map archive = yes

    map hidden (S)

    This controls whether DOS style hidden files should be mapped to the UNIX world execute bit.

    Note that this requires the create mask to be set such that the world execute bit is not masked out (i.e. - it must include 001). See the parameter - create mask for details.

    Default: map hidden = no

    map system (S)

    This controls whether DOS style system files + it must include 001). See the parameter for details.

    Default: map hidden = no

    map system (S)

    This controls whether DOS style system files should be mapped to the UNIX group execute bit.

    Note that this requires the create mask to be set such that the group execute bit is not masked out (i.e. - it must include 010). See the parameter - create mask for details.

    Default: map system = no

    map to guest (G)

    This parameter is only useful in - security modes other than security = share + it must include 010). See the parameter for details.

    Default: map system = no

    map to guest (G)

    This parameter is only useful in modes other than security = share - i.e. user, server, and domain.

    This parameter can take three different values, which tell smbd(8) what to do with user @@ -1693,10 +1573,9 @@ df $1 | tail -1 | awk '{print $2" "$4}' default.

  • Bad User - Means user logins with an invalid password are rejected, unless the username does not exist, in which case it is treated as a guest login and - mapped into the - guest account.

  • Bad Password - Means user logins + mapped into the .

  • Bad Password - Means user logins with an invalid password are treated as a guest login and mapped - into the guest account. Note that + into the . Note that this can cause problems as it means that any user incorrectly typing their password will be silently logged on as "guest" - and will not know the reason they cannot access files they think @@ -1715,8 +1594,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' If max connections is greater than 0 then connections will be refused if this number of connections to the service are already open. A value of zero mean an unlimited number of connections may be made.

    Record lock files are used to implement this feature. The lock files will be stored in - the directory specified by the - lock directory option.

    Default: max connections = 0

    Example: max connections = 10

  • max disk size (G)

    This option allows you to put an upper limit + the directory specified by the option.

    Default: max connections = 0

    Example: max connections = 10

    max disk size (G)

    This option allows you to put an upper limit on the apparent size of disks. If you set this option to 100 then all shares will appear to be not larger than 100 MB in size.

    Note that this option does not limit the amount of @@ -1740,8 +1618,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' this parameter so you should never need to touch this parameter.

    Default: max open files = 10000

    max print jobs (S)

    This parameter limits the maximum number of jobs allowable in a Samba printer queue at any given moment. If this number is exceeded, smbd(8) will remote "Out of Space" to the client. - See all total - print jobs. + See all .

    Default: max print jobs = 1000

    Example: max print jobs = 5000

    max protocol (G)

    The value of the parameter (a string) is the highest protocol level that will be supported by the server.

    Possible values are :

    • CORE: Earliest version. No concept of user names.

    • COREPLUS: Slight improvements on @@ -1750,16 +1627,13 @@ df $1 | tail -1 | awk '{print $2" "$4}' support.

    • LANMAN2: Updates to Lanman1 protocol.

    • NT1: Current up to date version of the protocol. Used by Windows NT. Known as CIFS.

    Normally this option should not be set as the automatic negotiation phase in the SMB protocol takes care of choosing - the appropriate protocol.

    See also min - protocol

    Default: max protocol = NT1

    Example: max protocol = LANMAN1

    max reported print jobs (S)

    This parameter limits the maximum number of + the appropriate protocol.

    See also

    Default: max protocol = NT1

    Example: max protocol = LANMAN1

    max reported print jobs (S)

    This parameter limits the maximum number of jobs displayed in a port monitor for Samba printer queue at any given moment. If this number is exceeded, the excess jobs will not be shown. A value of zero means there is no limit on the number of print jobs reported. - See all total - print jobs and max print - jobs parameters. + See all and parameters.

    Default: max reported print jobs = 0

    Example: max reported print jobs = 1000

    max smbd processes (G)

    This parameter limits the maximum number of smbd(8) processes concurrently running on a system and is intended as a stopgap to prevent degrading service to clients in the event that the server has insufficient resources to handle more than this number of connections. Remember that under normal operating @@ -1767,12 +1641,10 @@ df $1 | tail -1 | awk '{print $2" "$4}' shares from a given host.

    Default: max smbd processes = 0 ## no limit

    Example: max smbd processes = 1000

    max ttl (G)

    This option tells nmbd(8) what the default 'time to live' of NetBIOS names should be (in seconds) when nmbd is requesting a name using either a broadcast packet or from a WINS server. You should - never need to change this parameter. The default is 3 days.

    Default: max ttl = 259200

    max wins ttl (G)

    This option tells smbd(8) when acting as a WINS server ( - wins support = yes) what the maximum + never need to change this parameter. The default is 3 days.

    Default: max ttl = 259200

    max wins ttl (G)

    This option tells smbd(8) when acting as a WINS server () what the maximum 'time to live' of NetBIOS names that nmbd will grant will be (in seconds). You should never need to change this - parameter. The default is 6 days (518400 seconds).

    See also the min - wins ttl parameter.

    Default: max wins ttl = 518400

    max xmit (G)

    This option controls the maximum packet size + parameter. The default is 6 days (518400 seconds).

    See also the parameter.

    Default: max wins ttl = 518400

    max xmit (G)

    This option controls the maximum packet size that will be negotiated by Samba. The default is 65535, which is the maximum. In some cases you may find you get better performance with a smaller value. A value below 2048 is likely to cause problems. @@ -1799,29 +1671,22 @@ df $1 | tail -1 | awk '{print $2" "$4}' won't be delivered and Samba will tell the sender there was an error. Unfortunately WfWg totally ignores the error code and carries on regardless, saying that the message was delivered. -

    If you want to silently delete it then try:

    message command = rm %s

    Default: no message command

    Example: message command = csh -c 'xedit %s; rm %s' &

    min passwd length (G)

    Synonym for - min password length. +

    If you want to silently delete it then try:

    message command = rm %s

    Default: no message command

    Example: message command = csh -c 'xedit %s; rm %s' &

    min passwd length (G)

    Synonym for .

    min password length (G)

    This option sets the minimum length in characters of a plaintext password that smbd will - accept when performing UNIX password changing.

    See also unix - password sync, - passwd program and - passwd chat debug.

    Default: min password length = 5

    min print space (S)

    This sets the minimum amount of free disk + accept when performing UNIX password changing.

    See also , and .

    Default: min password length = 5

    min print space (S)

    This sets the minimum amount of free disk space that must be available before a user will be able to spool a print job. It is specified in kilobytes. The default is 0, which - means a user can always spool a print job.

    See also the printing - parameter.

    Default: min print space = 0

    Example: min print space = 2000

    min protocol (G)

    The value of the parameter (a string) is the + means a user can always spool a print job.

    See also the parameter.

    Default: min print space = 0

    Example: min print space = 2000

    min protocol (G)

    The value of the parameter (a string) is the lowest SMB protocol dialect than Samba will support. Please refer - to the max protocol + to the parameter for a list of valid protocol names and a brief description of each. You may also wish to refer to the C source code in source/smbd/negprot.c for a listing of known protocol dialects supported by clients.

    If you are viewing this parameter as a security measure, you should - also refer to the lanman - auth parameter. Otherwise, you should never need + also refer to the parameter. Otherwise, you should never need to change this parameter.

    Default : min protocol = CORE

    Example : min protocol = NT1 # disable DOS clients

    min wins ttl (G)

    This option tells nmbd(8) - when acting as a WINS server ( - wins support = yes) what the minimum 'time to live' + when acting as a WINS server () what the minimum 'time to live' of NetBIOS names that nmbd will grant will be (in seconds). You should never need to change this parameter. The default is 6 hours (21600 seconds).

    Default: min wins ttl = 21600

    msdfs proxy (S)

    This parameter indicates that the share is a @@ -1829,17 +1694,15 @@ df $1 | tail -1 | awk '{print $2" "$4}' the value of the parameter. When clients attempt to connect to this share, they are redirected to the proxied share using the SMB-Dfs protocol.

    Only Dfs roots can act as proxy shares. Take a look at the - msdfs root - and host msdfs - options to find out how to set up a Dfs root share.

    Example: msdfs proxy = \\\\otherserver\\someshare

    msdfs root (S)

    This boolean parameter is only available if - Samba is configured and compiled with the - --with-msdfs option. If set to yes, - Samba treats the share as a Dfs root and allows clients to browse - the distributed file system tree rooted at the share directory. - Dfs links are specified in the share directory by symbolic + + and + options to find out how to set up a Dfs root share.

    Example: msdfs proxy = \\\\otherserver\\someshare

    msdfs root (S)

    If set to yes, Samba treats the + share as a Dfs root and allows clients to browse the + distributed file system tree rooted at the share directory. + Dfs links are specified in the share directory by symbolic links of the form msdfs:serverA\\shareA,serverB\\shareB - and so on. For more information on setting up a Dfs tree - on Samba, refer to ???.

    See also host msdfs

    Default: msdfs root = no

    name cache timeout (G)

    Specifies the number of seconds it takes before + and so on. For more information on setting up a Dfs tree on + Samba, refer to .

    See also

    Default: msdfs root = no

    name cache timeout (G)

    Specifies the number of seconds it takes before entries in samba's hostname resolve cache time out. If the timeout is set to 0. the caching is disabled.

    Default: name cache timeout = 660

    Example: name cache timeout = 0

    name resolve order (G)

    This option is used by the programs in the Samba @@ -1850,7 +1713,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' "wins" and "bcast". They cause names to be resolved as follows:

    • lmhosts : Lookup an IP address in the Samba lmhosts file. If the line in lmhosts has - no name type attached to the NetBIOS name (see the lmhosts(5) for details) then + no name type attached to the NetBIOS name (see the lmhosts(5) for details) then any name type matches for lookup.

    • host : Do a standard host name to IP address resolution, using the system /etc/hosts , NIS, or DNS lookups. This method of name resolution @@ -1860,10 +1723,9 @@ df $1 | tail -1 | awk '{print $2" "$4}' type being queried is the 0x20 (server) name type or 0x1c (domain controllers). The latter case is only useful for active directory domains and results in a DNS query for the SRV RR entry matching _ldap._tcp.domain.

    • wins : Query a name with - the IP address listed in the - wins server parameter. If no WINS server has + the IP address listed in the parameter. If no WINS server has been specified this method will be ignored.

    • bcast : Do a broadcast on - each of the known local interfaces listed in the interfaces + each of the known local interfaces listed in the parameter. This is the least reliable of the name resolution methods as it depends on the target host being on a locally connected subnet.

    Default: name resolve order = lmhosts host wins bcast

    Example: name resolve order = lmhosts bcast host

    This will cause the local lmhosts file to be examined @@ -1875,14 +1737,12 @@ df $1 | tail -1 | awk '{print $2" "$4}' to appear in browse lists under multiple names. If a machine is acting as a browse server or logon server none of these names will be advertised as either browse server or logon servers, only the primary name of the machine will be advertised with these capabilities. -

    See also netbios - name.

    Default: empty string (no additional names)

    Example: netbios aliases = TEST TEST1 TEST2

    netbios name (G)

    This sets the NetBIOS name by which a Samba +

    See also .

    Default: empty string (no additional names)

    Example: netbios aliases = TEST TEST1 TEST2

    netbios name (G)

    This sets the NetBIOS name by which a Samba server is known. By default it is the same as the first component of the host's DNS name. If a machine is a browse server or logon server this name (or the first component of the hosts DNS name) will be the name that these services are - advertised under.

    See also netbios - aliases.

    Default: machine DNS name

    Example: netbios name = MYNAME

    netbios scope (G)

    This sets the NetBIOS scope that Samba will + advertised under.

    See also .

    Default: machine DNS name

    Example: netbios name = MYNAME

    netbios scope (G)

    This sets the NetBIOS scope that Samba will operate under. This should not be set unless every machine on your LAN also sets this value.

    nis homedir (G)

    Get the home share server from a NIS map. For UNIX systems that use an automounter, the user's home directory @@ -1897,8 +1757,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' long as a Samba daemon is running on the home directory server, it will be mounted on the Samba client directly from the directory server. When Samba is returning the home share to the client, it - will consult the NIS map specified in - homedir map and return the server + will consult the NIS map specified in and return the server listed there.

    Note that for this option to work there must be a working NIS system and the Samba server with this option must also be a logon server.

    Default: nis homedir = no

    nt acl support (S)

    This boolean parameter controls whether smbd(8) will attempt to map @@ -1923,25 +1782,22 @@ df $1 | tail -1 | awk '{print $2" "$4}' should obey PAM's account and session management directives. The default behavior is to use PAM for clear text authentication only and to ignore any account or session management. Note that Samba - always ignores PAM for authentication in the case of - encrypt passwords = yes. The reason + always ignores PAM for authentication in the case of . The reason is that PAM modules cannot support the challenge/response authentication mechanism needed in the presence of SMB password encryption. -

    Default: obey pam restrictions = no

    only guest (S)

    A synonym for - guest only.

    only user (S)

    This is a boolean option that controls whether +

    Default: obey pam restrictions = no

    only guest (S)

    A synonym for .

    only user (S)

    This is a boolean option that controls whether connections with usernames not in the user list will be allowed. By default this option is disabled so that a client can supply a username to be used by the server. Enabling this parameter will force the server to only use the login names from the user list and is only really - useful in share level + useful in security.

    Note that this also means Samba won't try to deduce usernames from the service name. This can be annoying for the [homes] section. To get around this you could use user = %S which means your user list will be just the service name, which for home directories is the - name of the user.

    See also the user - parameter.

    Default: only user = no

    oplock break wait time (G)

    This is a tuning parameter added due to bugs in + name of the user.

    See also the parameter.

    Default: only user = no

    oplock break wait time (G)

    This is a tuning parameter added due to bugs in both Windows 9x and WinNT. If Samba responds to a client too quickly when that client issues an SMB that can cause an oplock break request, then the network client can fail and not respond @@ -1964,20 +1820,17 @@ df $1 | tail -1 | awk '{print $2" "$4}' default in Windows NT Servers). For more information see the file Speed.txt in the Samba docs/ directory.

    Oplocks may be selectively turned off on certain files with a - share. See the - veto oplock files parameter. On some systems + share. See the parameter. On some systems oplocks are recognized by the underlying operating system. This allows data synchronization between all access to oplocked files, whether it be via Samba or NFS or a local UNIX process. See the - kernel oplocks parameter for details.

    See also the kernel - oplocks and - level2 oplocks parameters.

    Default: oplocks = yes

    os2 driver map (G)

    The parameter is used to define the absolute + kernel oplocks parameter for details.

    See also the and parameters.

    Default: oplocks = yes

    os2 driver map (G)

    The parameter is used to define the absolute path to a file containing a mapping of Windows NT printer driver names to OS/2 printer driver names. The format is:

    <nt driver name> = <os2 driver name>.<device name>

    For example, a valid entry using the HP LaserJet 5 printer driver would appear as HP LaserJet 5L = LASERJET.HP LaserJet 5L.

    The need for the file is due to the printer driver namespace - problem described in ???. For more details on OS/2 clients, please - refer to ???.

    Default: os2 driver map = <empty string>

    os level (G)

    This integer value controls what level Samba + problem described in . For more details on OS/2 clients, please + refer to .

    Default: os2 driver map = <empty string>

    os level (G)

    This integer value controls what level Samba advertises itself as for browse elections. The value of this parameter determines whether nmbd(8) has a chance of becoming a local master browser for the @@ -1991,9 +1844,9 @@ df $1 | tail -1 | awk '{print $2" "$4}' this parameter, it is possible to use PAM's password change control flag for Samba. If enabled, then PAM will be used for password changes when requested by an SMB client instead of the program listed in - passwd program. + . It should be possible to enable this without changing your - passwd chat + parameter for most setups.

    Default: pam password change = no

    panic action (G)

    This is a Samba developer option that allows a system command to be called when either smbd(8) or smbd(8) crashes. This is usually used to draw attention to the fact that a problem occurred.

    Default: panic action = <empty string>

    Example: panic action = "/bin/sleep 90000"

    paranoid server security (G)

    Some version of NT 4.x allow non-guest @@ -2014,11 +1867,10 @@ df $1 | tail -1 | awk '{print $2" "$4}' backend. Takes a path to the smbpasswd file as an optional argument.

  • tdbsam - The TDB based password storage backend. Takes a path to the TDB as an optional argument (defaults to passdb.tdb - in the - private dir directory.

  • ldapsam - The LDAP based passdb + in the directory.

  • ldapsam - The LDAP based passdb backend. Takes an LDAP URL as an optional argument (defaults to ldap://localhost)

    LDAP connections should be secured where possible. This may be done using either - Start-TLS (see ldap ssl) or by + Start-TLS (see ) or by specifying ldaps:// in the URL argument.

  • nisplussam - The NIS+ based passdb backend. Takes name NIS domain as @@ -2032,17 +1884,15 @@ df $1 | tail -1 | awk '{print $2" "$4}' conversation that takes places between smbd(8) and the local password changing program to change the user's password. The string describes a sequence of response-receive pairs that smbd(8) uses to determine what to send to the - passwd program - and what to expect back. If the expected output is not + and what to expect back. If the expected output is not received then the password is not changed.

    This chat sequence is often quite site specific, depending on what local methods are used for password control (such as NIS - etc).

    Note that this parameter only is only used if the unix password sync - parameter is set to yes. This sequence is + etc).

    Note that this parameter only is only used if the parameter is set to yes. This sequence is then called AS ROOT when the SMB password in the smbpasswd file is being changed, without access to the old password cleartext. This means that root must be able to reset the user's password without knowing the text of the previous password. In the presence of - NIS/YP, this means that the passwd program must + NIS/YP, this means that the must be executed on the NIS master.

    The string can contain the macro %n which is substituted for the new password. The chat sequence can also contain the standard @@ -2051,32 +1901,24 @@ df $1 | tail -1 | awk '{print $2" "$4}' a '*' which matches any sequence of characters. Double quotes can be used to collect strings with spaces in them into a single string.

    If the send string in any part of the chat sequence is a full stop ".", then no string is sent. Similarly, if the - expect string is a full stop then no string is expected.

    If the pam - password change parameter is set to yes, the chat pairs + expect string is a full stop then no string is expected.

    If the parameter is set to yes, the chat pairs may be matched in any order, and success is determined by the PAM result, not any particular output. The \n macro is ignored for PAM conversions. -

    See also unix password - sync, - passwd program , - passwd chat debug and - pam password change.

    Default: passwd chat = *new*password* %n\\n +

    See also , , and .

    Default: passwd chat = *new*password* %n\\n *new*password* %n\\n *changed*

    Example: passwd chat = "*Enter OLD password*" %o\\n "*Enter NEW password*" %n\\n "*Reenter NEW password*" %n\\n "*Password changed*"

  • passwd chat debug (G)

    This boolean specifies if the passwd chat script parameter is run in debug mode. In this mode the strings passed to and received from the passwd chat are printed in the smbd(8) log with a - debug level + of 100. This is a dangerous option as it will allow plaintext passwords to be seen in the smbd log. It is available to help Samba admins debug their passwd chat scripts when calling the passwd program and should be turned off after this has been done. This option has no effect if the - pam password change - paramter is set. This parameter is off by default.

    See also passwd chat - , pam password change - , passwd program - .

    Default: passwd chat debug = no

    passwd program (G)

    The name of a program that can be used to set + + paramter is set. This parameter is off by default.

    See also , , .

    Default: passwd chat debug = no

    passwd program (G)

    The name of a program that can be used to set UNIX user passwords. Any occurrences of %u will be replaced with the user name. The user name is checked for existence before calling the password changing program.

    Also note that many passwd programs insist in reasonable @@ -2093,8 +1935,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' is set this parameter MUST USE ABSOLUTE PATHS for ALL programs called, and must be examined for security implications. Note that by default unix - password sync is set to no.

    See also unix - password sync.

    Default: passwd program = /bin/passwd

    Example: passwd program = /sbin/npasswd %u

    password level (G)

    Some client/server combinations have difficulty + password sync is set to no.

    See also .

    Default: passwd program = /bin/passwd

    Example: passwd program = /sbin/npasswd %u

    password level (G)

    Some client/server combinations have difficulty with mixed-case passwords. One offending client is Windows for Workgroups, which for some reason forces passwords to upper case when using the LANMAN1 protocol, but leaves them alone when @@ -2122,8 +1963,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' Samba will use the standard LDAP port of tcp/389. Note that port numbers have no effect on password servers for Windows NT 4.0 domains or netbios connections.

    If parameter is a name, it is looked up using the - parameter name - resolve order and so may resolved + parameter and so may resolved by any method and order described in that parameter.

    The password server must be a machine capable of using the "LM1.2X002" or the "NT LM 0.12" protocol, and it must be in user level security mode.

    Note

    Using a password server means your UNIX box (running @@ -2165,8 +2005,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' password server then you will have to ensure that your users are able to login from the Samba server, as when in security = server mode the network logon will appear to - come from there rather than from the users workstation.

    See also the security - parameter.

    Default: password server = <empty string>

    Example: password server = NT-PDC, NT-BDC1, NT-BDC2, *

    Example: password server = windc.mydomain.com:389 192.168.1.101 *

    Example: password server = *

    path (S)

    This parameter specifies a directory to which + come from there rather than from the users workstation.

    See also the parameter.

    Default: password server = <empty string>

    Example: password server = NT-PDC, NT-BDC1, NT-BDC2, *

    Example: password server = windc.mydomain.com:389 192.168.1.101 *

    Example: password server = *

    path (S)

    This parameter specifies a directory to which the user of the service is to be given access. In the case of printable services, this is where print data will spool prior to being submitted to the host for printing.

    For a printable service offering guest access, the service @@ -2178,8 +2017,7 @@ df $1 | tail -1 | awk '{print $2" "$4}' on this connection. Any occurrences of %m will be replaced by the NetBIOS name of the machine they are connecting from. These replacements are very useful for setting - up pseudo home directories for users.

    Note that this path will be based on - root dir if one was specified.

    Default: none

    Example: path = /home/fred

    pid directory (G)

    This option specifies the directory where pid + up pseudo home directories for users.

    Note that this path will be based on if one was specified.

    Default: none

    Example: path = /home/fred

    pid directory (G)

    This option specifies the directory where pid files will be placed.

    Default: pid directory = ${prefix}/var/locks

    Example: pid directory = /var/run/

    posix locking (S)

    The smbd(8) daemon maintains an database of file locks obtained by SMB clients. The default behavior is to map this internal database to POSIX @@ -2190,48 +2028,40 @@ df $1 | tail -1 | awk '{print $2" "$4}' whenever the service is disconnected. It takes the usual substitutions. The command may be run as the root on some systems.

    An interesting example may be to unmount server - resources:

    postexec = /etc/umount /cdrom

    See also preexec.

    Default: none (no command executed)

    Example: postexec = echo \"%u disconnected from %S from %m (%I)\" >> /tmp/log

    preexec (S)

    This option specifies a command to be run whenever + resources:

    postexec = /etc/umount /cdrom

    See also .

    Default: none (no command executed)

    Example: postexec = echo \"%u disconnected from %S from %m (%I)\" >> /tmp/log

    preexec (S)

    This option specifies a command to be run whenever the service is connected to. It takes the usual substitutions.

    An interesting example is to send the users a welcome message every time they log in. Maybe a message of the day? Here - is an example:

    preexec = csh -c 'echo \"Welcome to %S!\" | /usr/local/samba/bin/smbclient -M %m -I %I' &

    Of course, this could get annoying after a while :-)

    See also preexec close and postexec - .

    Default: none (no command executed)

    Example: preexec = echo \"%u connected to %S from %m (%I)\" >> /tmp/log

    preexec close (S)

    This boolean option controls whether a non-zero - return code from preexec - should close the service being connected to.

    Default: preexec close = no

    prefered master (G)

    Synonym for - preferred master for people who cannot spell :-).

    preferred master (G)

    This boolean parameter controls if + is an example:

    preexec = csh -c 'echo \"Welcome to %S!\" | /usr/local/samba/bin/smbclient -M %m -I %I' &

    Of course, this could get annoying after a while :-)

    See also and .

    Default: none (no command executed)

    Example: preexec = echo \"%u connected to %S from %m (%I)\" >> /tmp/log

    preexec close (S)

    This boolean option controls whether a non-zero + return code from should close the service being connected to.

    Default: preexec close = no

    prefered master (G)

    Synonym for for people who cannot spell :-).

    preferred master (G)

    This boolean parameter controls if nmbd(8) is a preferred master browser for its workgroup.

    If this is set to yes, on startup, nmbd will force an election, and it will have a slight advantage in winning the election. It is recommended that this parameter is - used in conjunction with - domain master = yes, so + used in conjunction with = yes, so that nmbd can guarantee becoming a domain master.

    Use this option with caution, because if there are several hosts (whether Samba servers, Windows 95 or NT) that are preferred master browsers on the same subnet, they will each periodically and continuously attempt to become the local master browser. This will result in unnecessary broadcast - traffic and reduced browsing capabilities.

    See also os level.

    Default: preferred master = auto

    preload (G)

    This is a list of services that you want to be + traffic and reduced browsing capabilities.

    See also .

    Default: preferred master = auto

    preload (G)

    This is a list of services that you want to be automatically added to the browse lists. This is most useful for homes and printers services that would otherwise not be visible.

    Note that if you just want all printers in your - printcap file loaded then the - load printers option is easier.

    Default: no preloaded services

    Example: preload = fred lp colorlp

    preload modules (G)

    This is a list of paths to modules that should + printcap file loaded then the option is easier.

    Default: no preloaded services

    Example: preload = fred lp colorlp

    preload modules (G)

    This is a list of paths to modules that should be loaded into smbd before a client connects. This improves the speed of smbd when reacting to new connections somewhat.

    Default: preload modules =

    Example: preload modules = /usr/lib/samba/passdb/mysql.so+++

    preserve case (S)

    This controls if new filenames are created with the case that the client passes, or if they are forced to - be the default case - .

    Default: preserve case = yes

    See the section on NAME MANGLING for a fuller discussion.

    printable (S)

    If this parameter is yes, then + be the .

    Default: preserve case = yes

    See the section on for a fuller discussion.

    printable (S)

    If this parameter is yes, then clients may open, write to and submit spool files on the directory specified for the service.

    Note that a printable service will ALWAYS allow writing to the service path (user privileges permitting) via the spooling - of print data. The read only - parameter controls only non-printing access to - the resource.

    Default: printable = no

    printcap (G)

    Synonym for - printcap name.

    printcap name (S)

    This parameter may be used to override the + of print data. The parameter controls only non-printing access to + the resource.

    Default: printable = no

    printcap (G)

    Synonym for .

    printcap name (S)

    This parameter may be used to override the compiled-in default printcap name used by the server (usually - /etc/printcap). See the discussion of the [printers] section above for reasons + /etc/printcap). See the discussion of the section above for reasons why you might want to do this.

    To use the CUPS printing interface set printcap name = cups . This should be supplemented by an addtional setting - printing = cups in the [global] + in the [global] section. printcap name = cups will use the "dummy" printcap created by CUPS, as specified in your CUPS configuration file. @@ -2276,26 +2106,23 @@ print5|My Printer 5 printable service nor a global print command, spool files will be created but not processed and (most importantly) not removed.

    Note that printing may fail on some UNIXes from the nobody account. If this happens then create - an alternative guest account that can print and set the - guest account + an alternative guest account that can print and set the in the [global] section.

    You can form quite complex print commands by realizing that they are just passed to a shell. For example the following will log a print job, print the file, then remove it. Note that ';' is the usual separator for command in shell scripts.

    print command = echo Printing %s >> /tmp/print.log; lpr -P %p %s; rm %s

    You may have to vary this command considerably depending on how you normally print files on your system. The default for - the parameter varies depending on the setting of the - printing parameter.

    Default: For printing = BSD, AIX, QNX, LPRNG + the parameter varies depending on the setting of the parameter.

    Default: For printing = BSD, AIX, QNX, LPRNG or PLP :

    print command = lpr -r -P%p %s

    For printing = SYSV or HPUX :

    print command = lp -c -d%p %s; rm %s

    For printing = SOFTQ :

    print command = lp -d%p -s %s; rm %s

    For printing = CUPS : If SAMBA is compiled against - libcups, then printcap = cups + libcups, then uses the CUPS API to submit jobs, etc. Otherwise it maps to the System V commands with the -oraw option for printing, i.e. it uses lp -c -d%p -oraw; rm %s. With printing = cups, and if SAMBA is compiled against libcups, any manually - set print command will be ignored.

    Example: print command = /usr/local/samba/bin/myprintscript %p %s

    printer (S)

    Synonym for - printer name.

    printer admin (S)

    This is a list of users that can do anything to + set print command will be ignored.

    Example: print command = /usr/local/samba/bin/myprintscript %p %s

    printer (S)

    Synonym for .

    printer admin (S)

    This is a list of users that can do anything to printers via the remote administration interfaces offered by MS-RPC (usually using a NT workstation). Note that the root user always has admin rights.

    Default: printer admin = <empty string>

    Example: printer admin = admin, @staff

    printer name (S)

    This parameter specifies the name of the printer @@ -2311,9 +2138,7 @@ print5|My Printer 5 SYSV, HPUX, QNX, SOFTQ, and CUPS.

    To see what the defaults are for the other print - commands when using the various options use the testparm(1) program.

    This option can be set on a per printer basis

    See also the discussion in the - [printers] section.

    print ok (S)

    Synonym for - printable.

    private dir (G)

    This parameters defines the directory + commands when using the various options use the testparm(1) program.

    This option can be set on a per printer basis

    See also the discussion in the section.

    print ok (S)

    Synonym for .

    private dir (G)

    This parameters defines the directory smbd will use for storing such files as smbpasswd and secrets.tdb.

    Default :private dir = ${prefix}/private

    profile acls (S)

    This boolean parameter controls whether smbd(8) @@ -2339,9 +2164,7 @@ print5|My Printer 5 the top level profile directory (named after the user) is created by the workstation profile code and has an ACL restricting entry to the directory tree to the owning user. -

    Default: profile acls = no

    protocol (G)

    Synonym for - max protocol.

    public (S)

    Synonym for guest - ok.

    queuepause command (S)

    This parameter specifies the command to be +

    Default: profile acls = no

    protocol (G)

    Synonym for .

    public (S)

    Synonym for .

    queuepause command (S)

    This parameter specifies the command to be executed on the server host in order to pause the printer queue.

    This command should be a program or script which takes a printer name as its only parameter and stops the printer queue, such that no longer jobs are submitted to the printer.

    This command is not supported by Windows for Workgroups, @@ -2353,8 +2176,7 @@ print5|My Printer 5 server.

    Default: depends on the setting of printing

    Example: queuepause command = disable %p

    queueresume command (S)

    This parameter specifies the command to be executed on the server host in order to resume the printer queue. It is the command to undo the behavior that is caused by the - previous parameter ( - queuepause command).

    This command should be a program or script which takes + previous parameter ().

    This command should be a program or script which takes a printer name as its only parameter and resumes the printer queue, such that queued jobs are resubmitted to the printer.

    This command is not supported by Windows for Workgroups, but can be issued from the Printers window under Windows 95 @@ -2362,22 +2184,15 @@ print5|My Printer 5 is put in its place. Otherwise it is placed at the end of the command.

    Note that it is good practice to include the absolute path in the command as the PATH may not be available to the - server.

    Default: depends on the setting of - printing

    Example: queuepause command = enable %p

    read bmpx (G)

    This boolean parameter controls whether + server.

    Default: depends on the setting of

    Example: queuepause command = enable %p

    read bmpx (G)

    This boolean parameter controls whether smbd(8) will support the "Read Block Multiplex" SMB. This is now rarely used and defaults to no. You should never need to set this parameter.

    Default: read bmpx = no

    read list (S)

    This is a list of users that are given read-only access to a service. If the connecting user is in this list then - they will not be given write access, no matter what the - read only + they will not be given write access, no matter what the option is set to. The list can include group names using the - syntax described in the - invalid users parameter.

    See also the - write list parameter and the - invalid users - parameter.

    Default: read list = <empty string>

    Example: read list = mary, @students

    read only (S)

    An inverted synonym is - writeable.

    If this parameter is yes, then users + syntax described in the parameter.

    See also the parameter and the parameter.

    Default: read list = <empty string>

    Example: read list = mary, @students

    read only (S)

    An inverted synonym is .

    If this parameter is yes, then users of a service may not create or modify files in the service's directory.

    Note that a printable service (printable = yes) will ALWAYS allow writing to the directory @@ -2388,8 +2203,7 @@ print5|My Printer 5

    However, some clients either negotiate the allowable block size incorrectly or are incapable of supporting larger block sizes, and for these clients you may need to disable raw reads.

    In general this parameter should be viewed as a system tuning - tool and left severely alone. See also - write raw.

    Default: read raw = yes

    read size (G)

    The option read size + tool and left severely alone. See also .

    Default: read raw = yes

    read size (G)

    The option read size affects the overlap of disk reads/writes with network reads/writes. If the amount of data being transferred in several of the SMB commands (currently SMBwrite, SMBwriteX and SMBreadbraw) is larger @@ -2413,10 +2227,10 @@ print5|My Printer 5 192.168.4.255/STAFF

    the above line would cause nmbd to announce itself to the two given IP addresses using the given workgroup names. If you leave out the workgroup name then the one given in - the workgroup + the parameter is used instead.

    The IP addresses you choose would normally be the broadcast addresses of the remote networks, but can also be the IP addresses - of known browse masters if your network config is that stable.

    See ???.

    Default: remote announce = <empty string>

    remote browse sync (G)

    This option allows you to setup nmbd(8) to periodically request + of known browse masters if your network config is that stable.

    See .

    Default: remote announce = <empty string>

    remote browse sync (G)

    This option allows you to setup nmbd(8) to periodically request synchronization of browse lists with the master browser of a Samba server that is on a remote segment. This option will allow you to gain browse lists for multiple workgroups across routed networks. This @@ -2447,20 +2261,16 @@ print5|My Printer 5 means.

    Note

    The security advantage of using restrict anonymous = 2 is removed - by setting guest - ok = yes on any share. -

    Default: restrict anonymous = 0

    root (G)

    Synonym for - root directory". -

    root dir (G)

    Synonym for - root directory". + by setting on any share. +

    Default: restrict anonymous = 0

    root (G)

    Synonym for . +

    root dir (G)

    Synonym for .

    root directory (G)

    The server will chroot() (i.e. Change its root directory) to this directory on startup. This is not strictly necessary for secure operation. Even without it the server will deny access to files not in one of the service entries. It may also check for, and deny access to, soft links to other parts of the filesystem, or attempts to use ".." in file names - to access other directories (depending on the setting of the - wide links + to access other directories (depending on the setting of the parameter).

    Adding a root directory entry other than "/" adds an extra level of security, but at a price. It @@ -2476,16 +2286,11 @@ print5|My Printer 5 operating system dependent.

    Default: root directory = /

    Example: root directory = /homes/smb

    root postexec (S)

    This is the same as the postexec parameter except that the command is run as root. This is useful for unmounting filesystems - (such as CDROMs) after a connection is closed.

    See also - postexec.

    Default: root postexec = <empty string>

    root preexec (S)

    This is the same as the preexec + (such as CDROMs) after a connection is closed.

    See also .

    Default: root postexec = <empty string>

    root preexec (S)

    This is the same as the preexec parameter except that the command is run as root. This is useful for mounting filesystems (such as CDROMs) when a - connection is opened.

    See also - preexec and - preexec close.

    Default: root preexec = <empty string>

    root preexec close (S)

    This is the same as the preexec close - parameter except that the command is run as root.

    See also - preexec and - preexec close.

    Default: root preexec close = no

    security (G)

    This option affects how clients respond to + connection is opened.

    See also and .

    Default: root preexec = <empty string>

    root preexec close (S)

    This is the same as the preexec close + parameter except that the command is run as root.

    See also and .

    Default: root preexec close = no

    security (G)

    This option affects how clients respond to Samba and is one of the most important settings in the smb.conf file.

    The option sets the "security mode bit" in replies to protocol negotiations with smbd(8) to turn share level security on or off. Clients decide @@ -2509,11 +2314,9 @@ print5|My Printer 5 want to mainly setup shares without a password (guest shares). This is commonly used for a shared printer server. It is more difficult to setup guest shares with security = user, see - the map to guest - parameter for details.

    It is possible to use smbd in a + the parameter for details.

    It is possible to use smbd in a hybrid mode where it is offers both user and share - level security under different - NetBIOS aliases.

    The different settings will now be explained.

    SECURITY = SHARE

    When clients connect to a share level security server they + level security under different .

    The different settings will now be explained.

    SECURITY = SHARE

    When clients connect to a share level security server they need not log onto the server with a valid username and password before attempting to connect to a shared resource (although modern clients such as Windows 95/98 and Windows NT will send a logon request with @@ -2526,13 +2329,10 @@ print5|My Printer 5 in share level security, smbd uses several techniques to determine the correct UNIX user to use on behalf of the client.

    A list of possible UNIX usernames to match with the given - client password is constructed using the following methods :

    • If the guest - only parameter is set, then all the other - stages are missed and only the - guest account username is checked. + client password is constructed using the following methods :

      • If the parameter is set, then all the other + stages are missed and only the username is checked.

      • Is a username is sent with the share connection - request, then this username (after mapping - see - username map), + request, then this username (after mapping - see ), is added as a potential username.

      • If the client did a previous logon request (the SessionSetup SMB call) then the @@ -2541,8 +2341,7 @@ print5|My Printer 5 added as a potential username.

      • The NetBIOS name of the client is added to the list as a potential username. -

      • Any users on the - user list are added as potential usernames. +

      • Any users on the list are added as potential usernames.

      If the guest only parameter is not set, then this list is then tried with the supplied password. The first user for whom the password matches will be used as the @@ -2551,29 +2350,19 @@ print5|My Printer 5 as available to the guest account, then this guest user will be used, otherwise access is denied.

      Note that it can be very confusing in share-level security as to which UNIX username will eventually - be used in granting access.

      See also the section - NOTE ABOUT USERNAME/PASSWORD VALIDATION.

      SECURITY = USER

      This is the default security setting in Samba 3.0. + be used in granting access.

      See also the section .

      SECURITY = USER

      This is the default security setting in Samba 3.0. With user-level security a client must first "log-on" with a - valid username and password (which can be mapped using the - username map - parameter). Encrypted passwords (see the - encrypted passwords parameter) can also - be used in this security mode. Parameters such as - user and - guest only if set are then applied and + valid username and password (which can be mapped using the + parameter). Encrypted passwords (see the parameter) can also + be used in this security mode. Parameters such as and if set are then applied and may change the UNIX user to use on this connection, but only after the user has been successfully authenticated.

      Note that the name of the resource being requested is not sent to the server until after the server has successfully authenticated the client. This is why guest shares don't work in user level security without allowing - the server to automatically map unknown users into the - guest account. - See the map to guest - parameter for details on doing this.

      See also the section - NOTE ABOUT USERNAME/PASSWORD VALIDATION.

      SECURITY = DOMAIN

      This mode will only work correctly if net(8) has been used to add this - machine into a Windows NT Domain. It expects the - encrypted passwords - parameter to be set to yes. In this + the server to automatically map unknown users into the . + See the parameter for details on doing this.

      See also the section .

      SECURITY = DOMAIN

      This mode will only work correctly if net(8) has been used to add this + machine into a Windows NT Domain. It expects the parameter to be set to yes. In this mode Samba will try to validate the username/password by passing it to a Windows NT Primary or Backup Domain Controller, in exactly the same way that a Windows NT Server would do.

      Note that a valid UNIX user must still @@ -2586,18 +2375,11 @@ print5|My Printer 5 requested is not sent to the server until after the server has successfully authenticated the client. This is why guest shares don't work in user level security without allowing - the server to automatically map unknown users into the - guest account. - See the map to guest - parameter for details on doing this.

      See also the section - NOTE ABOUT USERNAME/PASSWORD VALIDATION.

      See also the password - server parameter and the - encrypted passwords - parameter.

      SECURITY = SERVER

      In this mode Samba will try to validate the username/password + the server to automatically map unknown users into the . + See the parameter for details on doing this.

      See also the section .

      See also the parameter and the parameter.

      SECURITY = SERVER

      In this mode Samba will try to validate the username/password by passing it to another SMB server, such as an NT box. If this fails it will revert to security = - user. It expects the - encrypted passwords parameter + user. It expects the parameter to be set to yes, unless the remote server does not support them. However note that if encrypted passwords have been negotiated then Samba cannot revert back to checking the UNIX password file, @@ -2618,20 +2400,12 @@ print5|My Printer 5 requested is not sent to the server until after the server has successfully authenticated the client. This is why guest shares don't work in user level security without allowing - the server to automatically map unknown users into the - guest account. - See the map to guest - parameter for details on doing this.

      See also the section - NOTE ABOUT USERNAME/PASSWORD VALIDATION.

      See also the password - server parameter and the - encrypted passwords parameter.

      SECURITY = ADS

      In this mode, Samba will act as a domain member in an ADS realm. To operate + the server to automatically map unknown users into the . + See the parameter for details on doing this.

      See also the section .

      See also the parameter and the parameter.

      SECURITY = ADS

      In this mode, Samba will act as a domain member in an ADS realm. To operate in this mode, the machine running Samba will need to have Kerberos installed and configured and Samba will need to be joined to the ADS realm using the net utility.

      Note that this mode does NOT make Samba operate as a Active Directory Domain - Controller.

      Read the chapter about Domain Membership in the HOWTO for details.

      See also the ads server - parameter, the realm - paramter and the - encrypted passwords parameter.

      Default: security = USER

      Example: security = DOMAIN

    security mask (S)

    This parameter controls what UNIX permission + Controller.

    Read the chapter about Domain Membership in the HOWTO for details.

    See also the parameter, the paramter and the parameter.

    Default: security = USER

    Example: security = DOMAIN

    security mask (S)

    This parameter controls what UNIX permission bits can be modified when a Windows NT client is manipulating the UNIX permission on a file using the native NT security dialog box.

    This parameter is applied as a mask (AND'ed with) to @@ -2644,11 +2418,8 @@ print5|My Printer 5 Samba server through other means can easily bypass this restriction, so it is primarily useful for standalone "appliance" systems. Administrators of most normal systems will - probably want to leave it set to 0777.

    See also the - force directory security mode, - directory - security mask, - force security mode parameters.

    Default: security mask = 0777

    Example: security mask = 0770

    server schannel (G)

    This controls whether the server offers or even + probably want to leave it set to 0777.

    See also the , + , parameters.

    Default: security mask = 0777

    Example: security mask = 0770

    server schannel (G)

    This controls whether the server offers or even demands the use of the netlogon schannel. server schannel = no does not offer the schannel, server schannel = @@ -2688,7 +2459,7 @@ print5|My Printer 5 samba can use.

    This parameter should specify the path to a script that can set quota for the specified arguments.

    The specified script should take the following arguments:

    • 1 - quota type

      • 1 - user quotas

      • 2 - user default quotas (uid = -1)

      • 3 - group quotas

      • 4 - group default quotas (gid = -1)

      -

    • 2 - id (uid for user, gid for group, -1 if N/A)

    • 3 - quota state (0 = disable, 1 = enable, 2 = enable and enforce)

    • 4 - block softlimit

    • 5 - block hardlimit

    • 6 - inode softlimit

    • 7 - inode hardlimit

    • 8(optional) - block size, defaults to 1024

    The script should output at least one line of data.

    See also the get quota command parameter. +

  • 2 - id (uid for user, gid for group, -1 if N/A)

  • 3 - quota state (0 = disable, 1 = enable, 2 = enable and enforce)

  • 4 - block softlimit

  • 5 - block hardlimit

  • 6 - inode softlimit

  • 7 - inode hardlimit

  • 8(optional) - block size, defaults to 1024

  • The script should output at least one line of data.

    See also the parameter.

    Default: set quota command =

    Example: set quota command = /usr/local/sbin/set_quota

    share modes (S)

    This enables or disables the honoring of the share modes during a file open. These modes are used by clients to gain exclusive read or write access @@ -2703,10 +2474,8 @@ print5|My Printer 5 off as many Windows applications will break if you do so.

    Default: share modes = yes

    short preserve case (S)

    This boolean parameter controls if new files which conform to 8.3 syntax, that is all in upper case and of suitable length, are created upper case, or if they are forced - to be the default case - . This option can be use with preserve case = yes - to permit long filenames to retain their case, while short - names are lowered.

    See the section on NAME MANGLING.

    Default: short preserve case = yes

    show add printer wizard (G)

    With the introduction of MS-RPC based printing support + to be the . This option can be use with to permit long filenames to retain their case, while short + names are lowered.

    See the section on .

    Default: short preserve case = yes

    show add printer wizard (G)

    With the introduction of MS-RPC based printing support for Windows NT/2000 client in Samba 2.2, a "Printers..." folder will appear on Samba hosts in the share listing. Normally this folder will contain an icon for the MS Add Printer Wizard (APW). However, it is @@ -2722,10 +2491,7 @@ print5|My Printer 5 parameter will always cause the OpenPrinterEx() on the server to fail. Thus the APW icon will never be displayed. Note :This does not prevent the same user from having - administrative privilege on an individual printer.

    See also addprinter - command, - deleteprinter command, - printer admin

    Default :show add printer wizard = yes

    shutdown script (G)

    This parameter only exists in the HEAD cvs branch + administrative privilege on an individual printer.

    See also , ,

    Default :show add printer wizard = yes

    shutdown script (G)

    This parameter only exists in the HEAD cvs branch This a full path name to a script called by smbd(8) that should start a shutdown procedure.

    This command will be run as the user connected to the server.

    %m %t %r %f parameters are expanded:

    • %m will be substituted with the shutdown message sent to the server.

    • %t will be substituted with the number of seconds to wait before effectively starting the @@ -2744,8 +2510,7 @@ let "time++" /sbin/shutdown $3 $4 +$time $1 &

      Shutdown does not return so we need to launch it in background. -

      See also - abort shutdown script.

    smb passwd file (G)

    This option sets the path to the encrypted smbpasswd file. By +

    See also .

    smb passwd file (G)

    This option sets the path to the encrypted smbpasswd file. By default the path to the smbpasswd file is compiled into Samba.

    Default: smb passwd file = ${prefix}/private/smbpasswd

    Example: smb passwd file = /etc/samba/smbpasswd

    smb ports (G)

    Specifies which ports the server should listen on for SMB traffic.

    Default: smb ports = 445 139

    socket address (G)

    This option allows you to control what address Samba will listen for connections on. This is used to support multiple virtual interfaces on the one server, each @@ -2763,8 +2528,8 @@ Shutdown does not return so we need to launch it in background. "Unknown socket option" when you supply an option. This means you either incorrectly typed it or you need to add an include file to includes.h for your OS. If the latter is the case please - send the patch to - samba-technical@samba.org.

    Any of the supported socket options may be combined + send the patch to + samba-technical@samba.org.

    Any of the supported socket options may be combined in any way you like, as long as your OS allows it.

    This is the list of socket options currently settable using this option:

    • SO_KEEPALIVE

    • SO_REUSEADDR

    • SO_BROADCAST

    • TCP_NODELAY

    • IPTOS_LOWDELAY

    • IPTOS_THROUGHPUT

    • SO_SNDBUF *

    • SO_RCVBUF *

    • SO_SNDLOWAT *

    • SO_RCVLOWAT *

    Those marked with a '*' take an integer argument. The others can optionally take a 1 or 0 argument to enable @@ -2792,11 +2557,11 @@ Shutdown does not return so we need to launch it in background. disk block allocation when a file is extended.

    Setting this to yes can help Samba return out of quota messages on systems that are restricting the disk quota of users.

    Default: strict allocate = no

    strict locking (S)

    This is a boolean that controls the handling of - file locking in the server. When this is set to yes + file locking in the server. When this is set to yes, the server will check every read and write access for file locks, and - deny access if locks exist. This can be slow on some systems.

    When strict locking is no the server does file + deny access if locks exist. This can be slow on some systems.

    When strict locking is disabled, the server performs file lock checks only when the client explicitly asks for them.

    Well-behaved clients always ask for lock checks when it - is important, so in the vast majority of cases strict + is important. So in the vast majority of cases, strict locking = no is preferable.

    Default: strict locking = no

    strict sync (S)

    Many Windows applications (including the Windows 98 explorer shell) seem to confuse flushing buffer contents to disk with doing a sync to disk. Under UNIX, a sync call forces the process to be @@ -2809,10 +2574,7 @@ Shutdown does not return so we need to launch it in background. of losing data if the operating system itself that Samba is running on crashes, so there is little danger in this default setting. In addition, this fixes many performance problems that people have - reported with the new Windows98 explorer shell file copies.

    See also the sync - always parameter.

    Default: strict sync = no

    strip dot (G)

    This is a boolean that controls whether to - strip trailing dots off UNIX filenames. This helps with some - CDROMs that have filenames ending in a single dot.

    Default: strip dot = no

    sync always (S)

    This is a boolean parameter that controls + reported with the new Windows98 explorer shell file copies.

    See also the parameter.

    Default: strict sync = no

    sync always (S)

    This is a boolean parameter that controls whether writes will always be written to stable storage before the write call returns. If this is no then the server will be guided by the client's request in each write call (clients can @@ -2821,8 +2583,7 @@ Shutdown does not return so we need to launch it in background. call to ensure the data is written to disk. Note that the strict sync parameter must be set to yes in order for this parameter to have - any affect.

    See also the strict - sync parameter.

    Default: sync always = no

    syslog (G)

    This parameter maps how Samba debug messages + any affect.

    See also the parameter.

    Default: sync always = no

    syslog (G)

    This parameter maps how Samba debug messages are logged onto the system syslog logging levels. Samba debug level zero maps onto syslog LOG_ERR, debug level one maps onto LOG_WARNING, debug level @@ -2847,8 +2608,7 @@ Shutdown does not return so we need to launch it in background. to the normal GMT to local time conversion. This is useful if you are serving a lot of PCs that have incorrect daylight saving time handling.

    Default: time offset = 0

    Example: time offset = 60

    time server (G)

    This parameter determines if nmbd(8) advertises itself as a time server to Windows - clients.

    Default: time server = no

    timestamp logs (G)

    Synonym for - debug timestamp.

    unicode (G)

    Specifies whether Samba should try + clients.

    Default: time server = no

    timestamp logs (G)

    Synonym for .

    unicode (G)

    Specifies whether Samba should try to use unicode on the wire by default. Note: This does NOT mean that samba will assume that the unix machine uses unicode!

    Default: unicode = yes

    unix charset (G)

    Specifies the charset the unix machine @@ -2866,9 +2626,7 @@ Shutdown does not return so we need to launch it in background. programparameter is called AS ROOT - to allow the new UNIX password to be set without access to the old UNIX password (as the SMB password change code has no - access to the old password cleartext, only the new).

    See also passwd - program, - passwd chat. + access to the old password cleartext, only the new).

    See also , .

    Default: unix password sync = no

    update encrypted (G)

    This boolean parameter allows a user logging on with a plaintext password to have their encrypted (hashed) password in the smbpasswd file to be updated automatically as they log @@ -2882,8 +2640,7 @@ Shutdown does not return so we need to launch it in background. over to encrypted passwords to be made over a longer period. Once all users have encrypted representations of their passwords in the smbpasswd file this parameter should be set to - no.

    In order for this parameter to work correctly the - encrypt passwords parameter must + no.

    In order for this parameter to work correctly the parameter must be set to no when this parameter is set to yes.

    Note that even when this parameter is set a user authenticating to smbd must still enter a valid password in order to connect correctly, and to update their hashed @@ -2910,14 +2667,14 @@ Shutdown does not return so we need to launch it in background. to PRINTER_ACCESS_USE instead. Thus allowing the OpenPrinterEx() call to succeed. This parameter MUST not be able enabled on a print share which has valid print driver installed on the Samba - server.

    See also disable spoolss

    Default: use client driver = no

    use mmap (G)

    This global parameter determines if the tdb internals of Samba can + server.

    See also

    Default: use client driver = no

    use mmap (G)

    This global parameter determines if the tdb internals of Samba can depend on mmap working correctly on the running system. Samba requires a coherent mmap/read-write system memory cache. Currently only HPUX does not have such a coherent cache, and so this parameter is set to no by default on HPUX. On all other systems this parameter should be left alone. This parameter is provided to help the Samba developers track down problems with the tdb internal code. -

    Default: use mmap = yes

    user (S)

    Synonym for username.

    username (S)

    Multiple users may be specified in a comma-delimited +

    Default: use mmap = yes

    user (S)

    Synonym for .

    username (S)

    Multiple users may be specified in a comma-delimited list, in which case the supplied password will be tested against each username in turn (left to right).

    The username line is needed only when the PC is unable to supply its own username. This is the case @@ -2936,8 +2693,7 @@ Shutdown does not return so we need to launch it in background. they will be able to do no more damage than if they started a telnet session. The daemon runs as the user that they log in as, so they cannot do anything that user cannot do.

    To restrict a service to a particular set of users you - can use the valid users - parameter.

    If any of the usernames begin with a '@' then the name + can use the parameter.

    If any of the usernames begin with a '@' then the name will be looked up first in the NIS netgroups list (if Samba is compiled with netgroup support), followed by a lookup in the UNIX groups database and will expand to a list of all users @@ -2948,8 +2704,7 @@ Shutdown does not return so we need to launch it in background. is compiled with netgroup support) and will expand to a list of all users in the netgroup group of that name.

    Note that searching though a groups database can take quite some time, and some clients may time out during the - search.

    See the section NOTE ABOUT - USERNAME/PASSWORD VALIDATION for more information on how + search.

    See the section for more information on how this parameter determines access to the services.

    Default: The guest account if a guest service, else <empty string>.

    Examples:username = fred, mary, jack, jane, @users, @pcgroup

    username level (G)

    This option helps Samba to try and 'guess' at @@ -3000,14 +2755,12 @@ guest = * will actually be connecting to \\server\mary and will need to supply a password suitable for mary not fred. The only exception to this is the - username passed to the - password server (if you have one). The password + username passed to the (if you have one). The password server will receive whatever username the client supplies without modification.

    Also note that no reverse mapping is done. The main effect this has is with printing. Users who have been mapped may have trouble deleting print jobs as PrintManager under WfWg will think - they don't own the print job.

    Default: no username map

    Example: username map = /usr/local/samba/lib/users.map

    users (S)

    Synonym for - username.

    use sendfile (S)

    If this parameter is yes, and Samba + they don't own the print job.

    Default: no username map

    Example: username map = /usr/local/samba/lib/users.map

    users (S)

    Synonym for .

    use sendfile (S)

    If this parameter is yes, and Samba was built with the --with-sendfile-support option, and the underlying operating system supports sendfile system call, then some SMB read calls (mainly ReadAndX and ReadRaw) will use the more efficient sendfile system call for files that @@ -3027,13 +2780,11 @@ guest = * are required to create a unique identifier for the incoming user. Enabling this option creates an n^2 algorithm to find this number. This may impede - performance on large installations.

    See also the - utmp directory parameter.

    Default: utmp = no

    utmp directory (G)

    This parameter is only available if Samba has + performance on large installations.

    See also the parameter.

    Default: utmp = no

    utmp directory (G)

    This parameter is only available if Samba has been configured and compiled with the option --with-utmp. It specifies a directory pathname that is used to store the utmp or utmpx files (depending on the UNIX system) that - record user connections to a Samba server. See also the - utmp parameter. By default this is + record user connections to a Samba server. See also the parameter. By default this is not set, meaning the system will use whatever utmp file the native system is set to use (usually /var/run/utmp on Linux).

    Default: no utmp directory

    Example: utmp directory = /var/run/utmp

    -valid (S)

    This parameter indicates whether a share is @@ -3049,8 +2800,7 @@ guest = * invalid users parameter.

    If this is empty (the default) then any user can login. If a username is in both this list and the invalid users list then access is denied for that user.

    The current servicename is substituted for %S - . This is useful in the [homes] section.

    See also invalid users -

    Default: No valid users list (anyone can login) + . This is useful in the [homes] section.

    See also

    Default: No valid users list (anyone can login)

    Example: valid users = greg, @pcusers

    veto files (S)

    This is a list of files and directories that are neither visible nor accessible. Each entry in the list must be separated by a '/', which allows spaces to be included @@ -3066,9 +2816,7 @@ guest = * the delete veto files parameter to yes.

    Setting this parameter will affect the performance of Samba, as it will be forced to check all files and directories - for a match as they are scanned.

    See also hide files - and - case sensitive.

    Default: No files or directories are vetoed. + for a match as they are scanned.

    See also and .

    Default: No files or directories are vetoed.

    Examples:

     ; Veto any files containing the word Security, 
    @@ -3079,12 +2827,11 @@ veto files = /*Security*/*.tmp/*root*/
     ; Veto the Apple specific files that a NetAtalk server
     ; creates.
     veto files = /.AppleDouble/.bin/.AppleDesktop/Network Trash Folder/
    -
    veto oplock files (S)

    This parameter is only valid when the - oplocks +

    veto oplock files (S)

    This parameter is only valid when the parameter is turned on for a share. It allows the Samba administrator to selectively turn off the granting of oplocks on selected files that match a wildcarded list, similar to the wildcarded list used in the - veto files + parameter.

    Default: No files are vetoed for oplock grants

    You might want to do this on files that you know will be heavily contended for by clients. A good example of this is in the NetBench SMB benchmark program, which causes heavy @@ -3092,9 +2839,7 @@ veto files = /.AppleDouble/.bin/.AppleDesktop/Network Trash Folder/ To cause Samba not to grant oplocks on these files you would use the line (either in the [global] section or in the section for the particular NetBench share :

    Example: veto oplock files = /*.SEM/

    vfs object (S)

    Synonym for - - vfs objects - . + .

    vfs objects (S)

    This parameter specifies the backend names which are used for Samba VFS I/O operations. By default, normal disk I/O operations are used but these can be overloaded @@ -3195,7 +2940,7 @@ veto files = /.AppleDouble/.bin/.AppleDesktop/Network Trash Folder/ seperated from the ip address by a colon.

    Note

    You need to set up Samba to point to a WINS server if you have multiple subnets and wish cross-subnet - browsing to work correctly.

    See the ???.

    Default: not enabled

    Example: wins server = mary:192.9.200.1 fred:192.168.3.199 mary:192.168.2.61

    For this example when querying a certain name, 192.19.200.1 will + browsing to work correctly.

    See the .

    Default: not enabled

    Example: wins server = mary:192.9.200.1 fred:192.168.3.199 mary:192.168.2.61

    For this example when querying a certain name, 192.19.200.1 will be asked first and if that doesn't respond 192.168.2.61. If either of those doesn't know the name 192.168.3.199 will be queried.

    Example: wins server = 192.9.200.1 192.168.2.61

    wins support (G)

    This boolean controls if the nmbd(8) process in Samba will act as a WINS server. You should @@ -3205,10 +2950,8 @@ veto files = /.AppleDouble/.bin/.AppleDesktop/Network Trash Folder/ on more than one machine in your network.

    Default: wins support = no

    workgroup (G)

    This controls what workgroup your server will appear to be in when queried by clients. Note that this parameter also controls the Domain name used with - the security = domain - setting.

    Default: set at compile time to WORKGROUP

    Example: workgroup = MYGROUP

    writable (S)

    Synonym for - writeable for people who can't spell :-).

    writeable (S)

    Inverted synonym for - read only.

    write cache size (S)

    If this integer parameter is set to non-zero value, + the + setting.

    Default: set at compile time to WORKGROUP

    Example: workgroup = MYGROUP

    writable (S)

    Synonym for for people who can't spell :-).

    writeable (S)

    Inverted synonym for .

    write cache size (S)

    If this integer parameter is set to non-zero value, Samba will create an in-memory cache for each oplocked file (it does not do this for non-oplocked files). All writes that the client does not request @@ -3223,13 +2966,10 @@ veto files = /.AppleDouble/.bin/.AppleDesktop/Network Trash Folder/ memory for userspace programs.

    The integer parameter specifies the size of this cache (per oplocked file) in bytes.

    Default: write cache size = 0

    Example: write cache size = 262144

    for a 256k cache size per file.

    write list (S)

    This is a list of users that are given read-write access to a service. If the connecting user is in this list then - they will be given write access, no matter what the - read only + they will be given write access, no matter what the option is set to. The list can include group names using the @group syntax.

    Note that if a user is in both the read list and the - write list then they will be given write access.

    See also the read list - option.

    Default: write list = <empty string>

    Example: write list = admin, root, @staff

    write ok (S)

    Inverted synonym for - read only.

    write raw (G)

    This parameter controls whether or not the server + write list then they will be given write access.

    See also the option.

    Default: write list = <empty string>

    Example: write list = admin, root, @staff

    write ok (S)

    Inverted synonym for .

    write raw (G)

    This parameter controls whether or not the server will support raw write SMB's when transferring data from clients. You should never need to change this parameter.

    Default: write raw = yes

    wtmp directory (G)

    This parameter is only available if Samba has been configured and compiled with the option @@ -3237,8 +2977,7 @@ veto files = /.AppleDouble/.bin/.AppleDesktop/Network Trash Folder/ used to store the wtmp or wtmpx files (depending on the UNIX system) that record user connections to a Samba server. The difference with the utmp directory is the fact that user info is kept after a user - has logged out.

    See also the - utmp parameter. By default this is + has logged out.

    See also the parameter. By default this is not set, meaning the system will use whatever utmp file the native system is set to use (usually /var/run/wtmp on Linux).

    Default: no wtmp directory

    Example: wtmp directory = /var/log/wtmp

    WARNINGS

    Although the configuration file permits service names @@ -3258,8 +2997,8 @@ veto files = /.AppleDouble/.bin/.AppleDesktop/Network Trash Folder/ by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

    The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another - excellent piece of Open Source software, available at - ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 + excellent piece of Open Source software, available at + ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.

    diff --git a/docs/htmldocs/smbcacls.1.html b/docs/htmldocs/smbcacls.1.html index 1c3cc5a2d3..a6bcf60720 100644 --- a/docs/htmldocs/smbcacls.1.html +++ b/docs/htmldocs/smbcacls.1.html @@ -1,6 +1,6 @@ -smbcacls