From b58b856db5c5c2583a4bbe24ab39726efefb18a6 Mon Sep 17 00:00:00 2001 From: Gerald Carter Date: Fri, 23 Feb 2001 04:34:24 +0000 Subject: more updates. Conversion almost done. 2 more man pages (then all the ASCII stuff) (This used to be commit 7247027e833616bfe9350253cc1e6cdb236b2cdf) --- docs/manpages/smbcacls.1 | 369 +++++++++++++++++++++++------------------------ 1 file changed, 184 insertions(+), 185 deletions(-) (limited to 'docs/manpages/smbcacls.1') diff --git a/docs/manpages/smbcacls.1 b/docs/manpages/smbcacls.1 index 9f5c00c6c4..fd8ca13591 100644 --- a/docs/manpages/smbcacls.1 +++ b/docs/manpages/smbcacls.1 @@ -1,192 +1,191 @@ -.TH "smbcacls " "1" "22 Dec 2000" "Samba" "SAMBA" -.PP -.SH "NAME" -smbcacls \- Set or get ACLs on an NT file or directory -.PP -.SH "SYNOPSIS" -.PP -\fBsmbcacls\fP //server/share filename [-U username] -[-A acls] [-M acls] -[-D acls] [-S acls] -[-C name] [-G name] -[-n] [-h] -.PP -.SH "DESCRIPTION" -.PP -The \fBsmbcacls\fP program manipulates NT Access Control Lists (ACLs) on -SMB file shares\&. -.PP -.SH "OPTIONS" -.PP -The following options are available to the \fBsmbcacls\fP program\&. The -format of ACLs is described in the section ACL FORMAT -.PP -.IP -.IP "\fB-A acls\fP" -.IP -Add the ACLs specified to the ACL list\&. Existing access control entries -are unchanged\&. -.IP -.IP "\fB-M acls\fP" -.IP -Modify the mask value (permissions) for the ACLs specified on the command -line\&. An error will be printed for each ACL specified that was not already -present in the ACL list\&. -.IP -.IP "\fB-D acls\fP" -.IP -Delete any ACLs specfied on the command line\&. An error will be printed for -each ACL specified that was not already present in the ACL list\&. -.IP -.IP "\fB-S acls\fP" -.IP -This command sets the ACLs on the file with only the ones specified on the -command line\&. All other ACLs are erased\&. Note that the ACL specified must -contain at least a revision, type, owner and group for the call to succeed\&. -.IP -.IP "\fB-U username\fP" -.IP -Specifies a username used to connect to the specified service\&. The -username may be of the form \f(CWusername\fP in which case the user is -prompted to enter in a password and the workgroup specified in the -\fBsmb\&.conf\fP file is used, or \f(CWusername%password\fP -or \f(CWDOMAIN\eusername%password\fP and the password and workgroup names are -used as provided\&. -.IP -.IP "\fB-C name\fP" -.IP -The owner of a file or directory can be changed to the name given -using the -C option\&. The name can be a sid in the form \f(CWS-1-x-y-z\fP or a -name resolved against the server specified in the first argument\&. -.IP -This command is a shortcut for \f(CW-M OWNER:name\fP\&. -.IP -.IP "\fB-G name\fP" -.IP -The group owner of a file or directory can be changed to the name given -using the -G option\&. The name can be a sid in the form \f(CWS-1-x-y-z\fP or a -name resolved against the server specified in the first argument\&. -.IP -This command is a shortcut for \f(CW-M GROUP:name\fP\&. -.IP -.IP "\fB-n\fP" -.IP -This option displays all ACL information in numeric format\&. The default is -to convert SIDs to names and ACE types and masks to a readable string -format\&. -.IP -.IP "\fB-h\fP" -.IP -Print usage information on the \fBsmbcacls\fP program -.IP -.PP -.SH "ACL FORMAT" -.PP -The format of an ACL is one or more ACL entries separated by either -commas or newlines\&. An ACL entry is one of the following: -.PP +.\" This manpage has been automatically generated by docbook2man-spec +.\" from a DocBook document. docbook2man-spec can be found at: +.\" +.\" Please send any bug reports, improvements, comments, patches, +.\" etc. to Steve Cheng . +.TH "SMBCACLS" "1" "22 February 2001" "" "" +.SH NAME +smbcacls \- Set or get ACLs on an NT file or directory names +.SH SYNOPSIS +.sp +\fBnmblookup\fR \fB//server/share\fR \fBfilename\fR [ \fB-U username\fR ] [ \fB-A acls\fR ] [ \fB-M acls\fR ] [ \fB-D acls\fR ] [ \fB-S acls\fR ] [ \fB-C name\fR ] [ \fB-G name\fR ] [ \fB-n\fR ] [ \fB-h\fR ] +.SH "DESCRIPTION" +.PP +This tool is part of the Samba suite. +.PP +The smbcacls program manipulates NT Access Control Lists +(ACLs) on SMB file shares. +.SH "OPTIONS" +.PP +The following options are available to the smbcacls program. +The format of ACLs is described in the section ACL FORMAT +.TP +\fB-A acls\fR +Add the ACLs specified to the ACL list. Existing +access control entries are unchanged. +.TP +\fB-M acls\fR +Modify the mask value (permissions) for the ACLs +specified on the command line. An error will be printed for each +ACL specified that was not already present in the ACL list +.TP +\fB-D acls\fR +Delete any ACLs specfied on the command line. +An error will be printed for each ACL specified that was not +already present in the ACL list. +.TP +\fB-S acls\fR +This command sets the ACLs on the file with +only the ones specified on the command line. All other ACLs are +erased. Note that the ACL specified must contain at least a revision, +type, owner and group for the call to succeed. +.TP +\fB-U username\fR +Specifies a username used to connect to the +specified service. The username may be of the form "username" in +which case the user is prompted to enter in a password and the +workgroup specified in the \fIsmb.conf\fR file is +used, or "username%password" or "DOMAIN\\username%password" and the +password and workgroup names are used as provided. +.TP +\fB-C name\fR +The owner of a file or directory can be changed +to the name given using the \fI-C\fR option. +The name can be a sid in the form S-1-x-y-z or a name resolved +against the server specified in the first argument. -.nf +This command is a shortcut for -M OWNER:name. +.TP +\fB-G name\fR +The group owner of a file or directory can +be changed to the name given using the \fI-G\fR +option. The name can be a sid in the form S-1-x-y-z or a name +resolved against the server specified n the first argument. + +This command is a shortcut for -M GROUP:name. +.TP +\fB-n\fR +This option displays all ACL information in numeric +format. The default is to convert SIDs to names and ACE types +and masks to a readable string format. +.TP +\fB-h\fR +Print usage information on the \fBsmbcacls +\fRprogram. +.SH "ACL FORMAT" +.PP +The format of an ACL is one or more ACL entries separated by +either commas or newlines. An ACL entry is one of the following: +.PP +.sp +.nf REVISION: OWNER: GROUP: ACL::// -.fi - - -.PP -The revision of the ACL specifies the internal Windows NT ACL revision for -the security descriptor\&. If not specified it defaults to 1\&. Using values -other than 1 may cause strange behaviour\&. -.PP -The owner and group specify the owner and group sids for the object\&. If a -SID in the format \f(CWS-1-x-y-z\fP is specified this is used, otherwise -the name specified is resolved using the server on which the file or -directory resides\&. -.PP -ACLs specify permissions granted to the SID\&. This SID again can be -specified in \f(CWS-1-x-y-z\fP format or as a name in which case it is resolved -against the server on which the file or directory resides\&. The type, flags -and mask values determine the type of access granted to the SID\&. -.PP -The type can be either 0 or 1 corresponding to ALLOWED or DENIED access to -the SID\&. The flags values are generally zero for file ACLs and either 9 or -2 for directory ACLs\&. Some common flags are: -.PP - -.nf - -#define SEC_ACE_FLAG_OBJECT_INHERIT 0x1 -#define SEC_ACE_FLAG_CONTAINER_INHERIT 0x2 -#define SEC_ACE_FLAG_NO_PROPAGATE_INHERIT 0x4 -#define SEC_ACE_FLAG_INHERIT_ONLY 0x8 -.fi - - -.PP -At present flags can only be specified as decimal or hexadecimal values\&. -.PP -The mask is a value which expresses the access right granted to the SID\&. -It can be given as a decimal or hexadecimal value, or by using one of the -following text strings which map to the NT file permissions of the same -name\&. -.PP -.IP -.IP "" -\f(CWR\fP Allow read access -.IP -.IP "" -\f(CWW\fP Allow write access -.IP -.IP "" -\f(CWX\fP Execute permission on the object -.IP -.IP "" -\f(CWD\fP Delete the object -.IP -.IP "" -\f(CWP\fP Change permissions -.IP -.IP "" -\f(CWO\fP Take ownership -.IP -.PP + +.sp +.fi +.PP +The revision of the ACL specifies the internal Windows +NT ACL revision for the security descriptor. +If not specified it defaults to 1. Using values other than 1 may +cause strange behaviour. +.PP +The owner and group specify the owner and group sids for the +object. If a SID in the format CWS-1-x-y-z is specified this is used, +otherwise the name specified is resolved using the server on which +the file or directory resides. +.PP +ACLs specify permissions granted to the SID. This SID again +can be specified in CWS-1-x-y-z format or as a name in which case +it is resolved against the server on which the file or directory +resides. The type, flags and mask values determine the type of +access granted to the SID. +.PP +The type can be either 0 or 1 corresponding to ALLOWED or +DENIED access to the SID. The flags values are generally +zero for file ACLs and either 9 or 2 for directory ACLs. Some +common flags are: +.TP 0.2i +\(bu +#define SEC_ACE_FLAG_OBJECT_INHERIT 0x1 +.TP 0.2i +\(bu +#define SEC_ACE_FLAG_CONTAINER_INHERIT 0x2 +.TP 0.2i +\(bu +#define SEC_ACE_FLAG_NO_PROPAGATE_INHERIT 0x4 +.TP 0.2i +\(bu +#define SEC_ACE_FLAG_INHERIT_ONLY 0x8 +.PP +At present flags can only be specified as decimal or +hexadecimal values. +.PP +.PP +The mask is a value which expresses the access right +granted to the SID. It can be given as a decimal or hexadecimal value, +or by using one of the following text strings which map to the NT +file permissions of the same name. +.PP +.TP 0.2i +\(bu +\fBR\fR - Allow read access +.TP 0.2i +\(bu +\fBW\fR - Allow write access +.TP 0.2i +\(bu +\fBX\fR - Execute permission on the object +.TP 0.2i +\(bu +\fBD\fR - Delete the object +.TP 0.2i +\(bu +\fBP\fR - Change permissions +.TP 0.2i +\(bu +\fBO\fR - Take ownership +.PP The following combined permissions can be specified: -.PP -.IP -.IP "" -\f(CWREAD\fP -.IP -Equivalent to \f(CWRX\fP permissions -.IP -.IP "" -\f(CWCHANGE\fP -.IP -Equivalent to \f(CWRXWD\fP permissions -.IP -.IP "" -\f(CWFULL\fP -.IP -Equivalent to \f(CWRWXDPO\fP permissions -.IP -.PP -.SH "EXIT STATUS" -.PP -The \fBsmbcacls\fP program sets the exit status depending on the success or -otherwise of the operations performed\&. The exit status may be one of the -following values\&. -.PP -If the operation succeded, \fBsmbcacls\fP returns and exit status of 0\&. If -\fBsmbcacls\fP couldn\'t connect to the specified server, or there was an -error getting or setting the ACLs, an exit status of 1 is returned\&. If -there was an error parsing any command line arguments, an exit status of 2 -is returned\&. -.PP -.SH "AUTHOR" -.PP -The original Samba software and related utilities were created by -Andrew Tridgell\&. Samba is now developed by the Samba Team as an Open -Source project\&. -.PP -\fBsmbcacls\fP was written by Andrew Tridgell and Tim Potter\&. +.PP +.TP 0.2i +\(bu +\fBREAD\fR - Equivalent to 'RX' +permissions +.TP 0.2i +\(bu +\fBCHANGE\fR - Equivalent to 'RXWD' permissions +.TP 0.2i +\(bu +\fBFULL\fR - Equivalent to 'RWXDPO' +permissions +.SH "EXIT STATUS" +.PP +The \fBsmbcacls\fR program sets the exit status +depending on the success or otherwise of the operations performed. +The exit status may be one of the following values. +.PP +If the operation succeded, smbcacls returns and exit +status of 0. If smbcacls couldn't connect to the specified server, +or there was an error getting or setting the ACLs, an exit status +of 1 is returned. If there was an error parsing any command line +arguments, an exit status of 2 is returned. +.SH "VERSION" +.PP +This man page is correct for version 2.2 of +the Samba suite. +.SH "AUTHOR" +.PP +The original Samba software and related utilities +were created by Andrew Tridgell. Samba is now developed +by the Samba Team as an Open Source project similar +to the way the Linux kernel is developed. +.PP +\fBsmbcacls\fR was written by Andrew Tridgell +and Tim Potter. +.PP +The conversion to DocBook for Samba 2.2 was done +by Gerald Carter -- cgit