From 10ecd43a4279d429ecbeb00b82ea8afc95d717c3 Mon Sep 17 00:00:00 2001 From: John Terpstra Date: Sun, 5 Jul 1998 03:00:05 +0000 Subject: Fixed typos pointed out by Pekka Savola (This used to be commit f0ca1afb77de83318d95ebad2a0477bc360cdefc) --- docs/textdocs/Printing.txt | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'docs/textdocs') diff --git a/docs/textdocs/Printing.txt b/docs/textdocs/Printing.txt index 98efbb5408..2169523eaa 100644 --- a/docs/textdocs/Printing.txt +++ b/docs/textdocs/Printing.txt @@ -1,5 +1,5 @@ !== -!== Printing.txt for Samba release 1.9.18p3 19 Feb 1998 +!== Printing.txt for Samba release 1.9.18p8 13 Jun 1998 !== Contributor: Unknown Date: Unknown @@ -109,10 +109,10 @@ The best way to start is to use printtool under X to create a new entry specific Next, go into "/etc" and edit the printcap entry you just created, changing it to look like this (if you named it something other than raw, the entry name and spool directory should be changed here to match): raw:\ -:rw:sh: -:lp=/dev/lp1 -:sd=/var/spool/lpd/raw -:fx=flp + :rw:sh: \ + :lp=/dev/lp1: \ + :sd=/var/spool/lpd/raw: \ + :fx=flp: When this is done and saved, edit the section of the smb.conf file that applies to the printer. Make sure the name of the section (enclosed in brackets) matches the name of the raw printer you just set up, then go down a line or two and add this line: -- cgit