From e1714121b109db6e23f368bb78f07876c27379a4 Mon Sep 17 00:00:00 2001 From: Matthias Dieter Wallnöfer Date: Mon, 29 Mar 2010 19:45:33 +0200 Subject: howto4.txt - improve the content of chapter 2bis --- howto4.txt | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'howto4.txt') diff --git a/howto4.txt b/howto4.txt index af82548d3a..71b712e598 100644 --- a/howto4.txt +++ b/howto4.txt @@ -63,9 +63,11 @@ Run this:: Step 2bis: recompile Samba4 --------------------------- -This part only apply for those who are recompiling samba 4 after updating the code (with rsync or git). +This only applies for those who are recompiling Samba4 after updating the code +(using "rsync" or "git"). -Due to some imperfection in the our build system it recommended to do the following sequence after updating the code: +Due to some imperfections in our actual build system (hope that this changes +soon) it is recommended to perform this after the source upgrade: $ cd samba4/source $ make clean @@ -74,8 +76,9 @@ Due to some imperfection in the our build system it recommended to do the follow $ make idl_full $ make -Not all the steps are needed everytime but doing so insure that you won't have old compiled objects mixed with new code. -It also insure that change in the idl are correctly catched up. +Not all the steps are needed every time but doing so makes sure that you won't +have old compiled objects standing in the way and cause malfunctions. +It also makes sure that changes in the IDL files are correctly catched up. Step 3: install Samba4 ---------------------- -- cgit