From 652f0e601da0d1d2e2c8b9281bbee9fa399d9877 Mon Sep 17 00:00:00 2001 From: Jelmer Vernooij Date: Sun, 12 Oct 2008 17:34:28 +0200 Subject: Move nmblookup to same location as the rest of the NBT client library. --- libcli/nbt/man/nmblookup.1.xml | 223 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 223 insertions(+) create mode 100644 libcli/nbt/man/nmblookup.1.xml (limited to 'libcli/nbt/man') diff --git a/libcli/nbt/man/nmblookup.1.xml b/libcli/nbt/man/nmblookup.1.xml new file mode 100644 index 0000000000..85640da033 --- /dev/null +++ b/libcli/nbt/man/nmblookup.1.xml @@ -0,0 +1,223 @@ + + + + + + nmblookup + 1 + Samba + User Commands + 3.2 + + + + + nmblookup + NetBIOS over TCP/IP client used to lookup NetBIOS + names + + + + + nmblookup + -M + -R + -S + -r + -A + -h + -B <broadcast address> + -U <unicast address> + -d <debug level> + -s <smb config file> + -i <NetBIOS scope> + -T + -f + name + + + + + DESCRIPTION + + This tool is part of the samba + 7 suite. + + nmblookup is used to query NetBIOS names + and map them to IP addresses in a network using NetBIOS over TCP/IP + queries. The options allow the name queries to be directed at a + particular IP broadcast area or to a particular machine. All queries + are done over UDP. + + + + OPTIONS + + + + -M + Searches for a master browser by looking + up the NetBIOS name name with a + type of 0x1d. If + name is "-" then it does a lookup on the special name + __MSBROWSE__. Please note that in order to + use the name "-", you need to make sure "-" isn't parsed as an + argument, e.g. use : + nmblookup -M -- -. + + + + -R + Set the recursion desired bit in the packet + to do a recursive lookup. This is used when sending a name + query to a machine running a WINS server and the user wishes + to query the names in the WINS server. If this bit is unset + the normal (broadcast responding) NetBIOS processing code + on a machine is used instead. See RFC1001, RFC1002 for details. + + + + + -S + Once the name query has returned an IP + address then do a node status query as well. A node status + query returns the NetBIOS names registered by a host. + + + + + + -r + Try and bind to UDP port 137 to send and receive UDP + datagrams. The reason for this option is a bug in Windows 95 + where it ignores the source port of the requesting packet + and only replies to UDP port 137. Unfortunately, on most UNIX + systems root privilege is needed to bind to this port, and + in addition, if the nmbd + 8 daemon is running on this machine it also binds to this port. + + + + + + -A + Interpret name as + an IP Address and do a node status query on this address. + + + + + + &popt.common.connection; + &stdarg.help; + + + -B <broadcast address> + Send the query to the given broadcast address. Without + this option the default behavior of nmblookup is to send the + query to the broadcast address of the network interfaces as + either auto-detected or defined in the interfaces + parameter of the smb.conf + 5 file. + + + + + + + -U <unicast address> + Do a unicast query to the specified address or + host unicast address. This option + (along with the -R option) is needed to + query a WINS server. + + + &stdarg.server.debug; + &popt.common.samba; + + + -T + This causes any IP addresses found in the + lookup to be looked up via a reverse DNS lookup into a + DNS name, and printed out before each + + IP address .... NetBIOS name + + pair that is the normal output. + + + + -f + + Show which flags apply to the name that has been looked up. Possible + answers are zero or more of: Response, Authoritative, + Truncated, Recursion_Desired, Recursion_Available, Broadcast. + + + + + + name + This is the NetBIOS name being queried. Depending + upon the previous options this may be a NetBIOS name or IP address. + If a NetBIOS name then the different name types may be specified + by appending '#<type>' to the name. This name may also be + '*', which will return all registered names within a broadcast + area. + + + + + + + EXAMPLES + + nmblookup can be used to query + a WINS server (in the same way nslookup is + used to query DNS servers). To query a WINS server, nmblookup + must be called like this: + + nmblookup -U server -R 'name' + + For example, running : + + nmblookup -U samba.org -R 'IRIX#1B' + + would query the WINS server samba.org for the domain + master browser (1B name type) for the IRIX workgroup. + + + + VERSION + + This man page is correct for version 3 of + the Samba suite. + + + + SEE ALSO + nmbd + 8, samba + 7, and smb.conf + 5. + + + + AUTHOR + + The original Samba software and related utilities + were created by Andrew Tridgell. Samba is now developed + by the Samba Team as an Open Source project similar + to the way the Linux kernel is developed. + + The original Samba man pages were written by Karl Auer. + The man page sources were converted to YODL format (another + excellent piece of Open Source software, available at + ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 + release by Jeremy Allison. The conversion to DocBook for + Samba 2.2 was done by Gerald Carter. The conversion to DocBook + XML 4.2 for Samba 3.0 was done by Alexander Bokovoy. + + + -- cgit