From 0d8b45c8c5c4a26eb6bb3a61805e8135e5e3194e Mon Sep 17 00:00:00 2001 From: Michael Adam Date: Sat, 10 May 2008 01:23:10 +0200 Subject: packaging: rename RHEL4-CTDB --> RHEL-CTDB Michael (This used to be commit 711af98d2ce708421a413fe46a386ea9e19d2517) --- packaging/RHEL-CTDB/README | 3 + packaging/RHEL-CTDB/configure.rpm | 34 ++ packaging/RHEL-CTDB/makerpms.sh | 102 ++++ packaging/RHEL-CTDB/samba.spec | 556 +++++++++++++++++++++ packaging/RHEL-CTDB/setup/filter-requires-samba.sh | 4 + packaging/RHEL-CTDB/setup/samba.log | 9 + packaging/RHEL-CTDB/setup/samba.pamd | 4 + packaging/RHEL-CTDB/setup/samba.sysconfig | 6 + packaging/RHEL-CTDB/setup/smb.conf | 271 ++++++++++ packaging/RHEL-CTDB/setup/smb.init | 135 +++++ packaging/RHEL-CTDB/setup/smbprint | 84 ++++ packaging/RHEL-CTDB/setup/smbusers | 3 + packaging/RHEL-CTDB/setup/swat | 15 + packaging/RHEL-CTDB/setup/swat.desktop | 8 + packaging/RHEL-CTDB/setup/winbind.init | 100 ++++ packaging/RHEL4-CTDB/README | 3 - packaging/RHEL4-CTDB/configure.rpm | 34 -- packaging/RHEL4-CTDB/makerpms.sh | 102 ---- packaging/RHEL4-CTDB/samba.spec | 556 --------------------- .../RHEL4-CTDB/setup/filter-requires-samba.sh | 4 - packaging/RHEL4-CTDB/setup/samba.log | 9 - packaging/RHEL4-CTDB/setup/samba.pamd | 4 - packaging/RHEL4-CTDB/setup/samba.sysconfig | 6 - packaging/RHEL4-CTDB/setup/smb.conf | 271 ---------- packaging/RHEL4-CTDB/setup/smb.init | 135 ----- packaging/RHEL4-CTDB/setup/smbprint | 84 ---- packaging/RHEL4-CTDB/setup/smbusers | 3 - packaging/RHEL4-CTDB/setup/swat | 15 - packaging/RHEL4-CTDB/setup/swat.desktop | 8 - packaging/RHEL4-CTDB/setup/winbind.init | 100 ---- 30 files changed, 1334 insertions(+), 1334 deletions(-) create mode 100644 packaging/RHEL-CTDB/README create mode 100644 packaging/RHEL-CTDB/configure.rpm create mode 100755 packaging/RHEL-CTDB/makerpms.sh create mode 100644 packaging/RHEL-CTDB/samba.spec create mode 100755 packaging/RHEL-CTDB/setup/filter-requires-samba.sh create mode 100644 packaging/RHEL-CTDB/setup/samba.log create mode 100644 packaging/RHEL-CTDB/setup/samba.pamd create mode 100644 packaging/RHEL-CTDB/setup/samba.sysconfig create mode 100644 packaging/RHEL-CTDB/setup/smb.conf create mode 100644 packaging/RHEL-CTDB/setup/smb.init create mode 100644 packaging/RHEL-CTDB/setup/smbprint create mode 100644 packaging/RHEL-CTDB/setup/smbusers create mode 100644 packaging/RHEL-CTDB/setup/swat create mode 100644 packaging/RHEL-CTDB/setup/swat.desktop create mode 100644 packaging/RHEL-CTDB/setup/winbind.init delete mode 100644 packaging/RHEL4-CTDB/README delete mode 100644 packaging/RHEL4-CTDB/configure.rpm delete mode 100755 packaging/RHEL4-CTDB/makerpms.sh delete mode 100644 packaging/RHEL4-CTDB/samba.spec delete mode 100755 packaging/RHEL4-CTDB/setup/filter-requires-samba.sh delete mode 100644 packaging/RHEL4-CTDB/setup/samba.log delete mode 100644 packaging/RHEL4-CTDB/setup/samba.pamd delete mode 100644 packaging/RHEL4-CTDB/setup/samba.sysconfig delete mode 100644 packaging/RHEL4-CTDB/setup/smb.conf delete mode 100644 packaging/RHEL4-CTDB/setup/smb.init delete mode 100644 packaging/RHEL4-CTDB/setup/smbprint delete mode 100644 packaging/RHEL4-CTDB/setup/smbusers delete mode 100644 packaging/RHEL4-CTDB/setup/swat delete mode 100644 packaging/RHEL4-CTDB/setup/swat.desktop delete mode 100644 packaging/RHEL4-CTDB/setup/winbind.init (limited to 'packaging') diff --git a/packaging/RHEL-CTDB/README b/packaging/RHEL-CTDB/README new file mode 100644 index 0000000000..131682089e --- /dev/null +++ b/packaging/RHEL-CTDB/README @@ -0,0 +1,3 @@ +In order to keep the docs out of the bzr tree, first get a release +tarball of samba, then invoke makerpms.sh with the DOCS_DIR variable +pointing to the docs dir of that samba tarball. diff --git a/packaging/RHEL-CTDB/configure.rpm b/packaging/RHEL-CTDB/configure.rpm new file mode 100644 index 0000000000..e1a58ddb3b --- /dev/null +++ b/packaging/RHEL-CTDB/configure.rpm @@ -0,0 +1,34 @@ + +CFLAGS="-Wall -g -D_GNU_SOURCE" ./configure \ + --prefix=/usr \ + --localstatedir=/var \ + --with-configdir=/etc/samba \ + --with-libdir=/usr/lib/samba \ + --with-lockdir=/var/lib/samba \ + --with-logfilebase=/var/log/samba \ + --with-mandir=/usr/man \ + --with-piddir=/var/run \ + --with-privatedir=/etc/samba \ + --with-sambabook=/usr/share/swat/using_samba \ + --with-swatdir=/usr/share/swat \ + --enable-cups \ + --with-acl-support \ + --with-ads \ + --with-automount \ + --with-fhs \ + --with-pam_smbpass \ + --with-libsmbclient \ + --with-libsmbsharemodes \ + --without-smbwrapper \ + --with-pam \ + --with-quotas \ + --with-shared-modules=idmap_rid,idmap_ad \ + --with-smbmount \ + --with-syslog \ + --with-utmp \ + --with-cluster-support \ + --with-ctdb=/usr/include \ + --without-ldb \ + --with-dnsupdate \ + --with-aio-support \ + $* diff --git a/packaging/RHEL-CTDB/makerpms.sh b/packaging/RHEL-CTDB/makerpms.sh new file mode 100755 index 0000000000..671519453d --- /dev/null +++ b/packaging/RHEL-CTDB/makerpms.sh @@ -0,0 +1,102 @@ +#!/bin/sh +# Copyright (C) John H Terpstra 1998-2002 +# Gerald (Jerry) Carter 2003 + +# The following allows environment variables to override the target directories +# the alternative is to have a file in your home directory calles .rpmmacros +# containing the following: +# %_topdir /home/mylogin/redhat +# +# Note: Under this directory rpm expects to find the same directories that are under the +# /usr/src/redhat directory +# + +# set DOCS_DIR to the path to a release tarball docs dir in order to get docs +EXTRA_OPTIONS="$1" + +SPECDIR=`rpm --eval %_specdir` +SRCDIR=`rpm --eval %_sourcedir` + +# At this point the SPECDIR and SRCDIR vaiables must have a value! + +USERID=`id -u` +GRPID=`id -g` +VERSION='3.2.0' +REVISION='ctdb' +SPECFILE="samba.spec" +RPMVER=`rpm --version | awk '{print $3}'` +RPM="rpmbuild" + +## +## Check the RPM version (paranoid) +## +case $RPMVER in + 4*) + echo "Supported RPM version [$RPMVER]" + ;; + *) + echo "Unknown RPM version: `rpm --version`" + exit 1 + ;; +esac + +pushd . +cd ../../source +if [ -f Makefile ]; then + make distclean +fi +popd + +pushd . +cd ../../ +SRCTREE=`basename $PWD` +if [ $DOCS_DIR ] && [ -d $DOCS_DIR ]; then + mv docs docs-orig + ln -s $DOCS_DIR docs +fi +cd ../ +chown -R ${USERID}.${GRPID} $SRCTREE +if [ ! -d samba-${VERSION} ]; then + ln -s $SRCTREE samba-${VERSION} || exit 1 +fi +echo -n "Creating samba-${VERSION}.tar.bz2 ... " +tar --exclude=.svn --exclude=.bzr --exclude=.bzrignore --exclude=docs-orig -chf - samba-${VERSION}/. | bzip2 > ${SRCDIR}/samba-${VERSION}.tar.bz2 +echo "Done." +if [ $? -ne 0 ]; then + popd + cd ../../ + # restore original structure if docs were specified + if [ ${DOCS_DIR} ] && [ -d docs-orig ] && [ -L docs ]; then + rm docs + mv docs-orig docs + fi + echo "Build failed!" + exit 1 +fi + +popd + + +## +## copy additional source files +## +chmod 755 setup/filter-requires-samba.sh +tar --exclude=.svn -jcvf - setup > ${SRCDIR}/setup.tar.bz2 +cp -p ${SPECFILE} ${SPECDIR} + +## +## Build +## +echo "$(basename $0): Getting Ready to build release package" +cd ${SPECDIR} +${RPM} -ba --clean --rmsource $EXTRA_OPTIONS $SPECFILE + +# restore original structure if docs were specified +cd ../../ +if [ ${DOCS_DIR} ] && [ -d docs-orig ] && [ -L docs ]; then + rm docs + mv -f docs-orig docs +fi + +echo "$(basename $0): Done." + diff --git a/packaging/RHEL-CTDB/samba.spec b/packaging/RHEL-CTDB/samba.spec new file mode 100644 index 0000000000..eae45dd521 --- /dev/null +++ b/packaging/RHEL-CTDB/samba.spec @@ -0,0 +1,556 @@ +%define initdir %{_sysconfdir}/rc.d/init.d +%define auth %(test -f /etc/pam.d/system-auth && echo /etc/pam.d/system-auth || echo) + +Summary: Samba SMB client and server +Vendor: Samba Team +Packager: Samba Team +Name: samba +Version: 3.2.0 +Release: ctdb.test.090508 +Epoch: 0 +License: GNU GPL version 2 +Group: System Environment/Daemons +URL: http://www.samba.org/ + +Source: samba-%{version}.tar.bz2 + +# Don't depend on Net::LDAP +Source998: filter-requires-samba.sh +Source999: setup.tar.bz2 + +Prereq: /sbin/chkconfig /bin/mktemp /usr/bin/killall +Prereq: fileutils sed /etc/init.d + +Requires: pam >= 0.64 %{auth} +Requires: samba-common = %{version}-%{release} +Requires: logrotate >= 3.4 initscripts >= 5.54-1 +Provides: samba = %{version} + +Prefix: /usr +BuildRoot: %{_tmppath}/%{name}-%{version}-root +BuildRequires: pam-devel, readline-devel, fileutils, libacl-devel, openldap-devel, krb5-devel, cups-devel, ctdb + +# Working around perl dependency problem from docs +%define __perl_requires %{SOURCE998} + +# rpm screws up the arch lib dir when using --target on RHEL5 +%ifarch i386 i486 i586 i686 ppc s390 +%define _libarch lib +%else +%define _libarch %_lib +%endif + + +%description +Samba is the protocol by which a lot of PC-related machines share +files, printers, and other information (such as lists of available +files and printers). The Windows NT, OS/2, and Linux operating systems +support this natively, and add-on packages can enable the same thing +for DOS, Windows, VMS, UNIX of all kinds, MVS, and more. This package +provides an SMB server that can be used to provide network services to +SMB (sometimes called "Lan Manager") clients. Samba uses NetBIOS over +TCP/IP (NetBT) protocols and does NOT need the NetBEUI (Microsoft Raw +NetBIOS frame) protocol. + + +###################################################################### +%package client +Summary: Samba (SMB) client programs. +Group: Applications/System +Requires: samba-common = %{version}-%{release} +Obsoletes: smbfs +Provides: samba-client = %{version}-%{release} + +%description client +The samba-client package provides some SMB clients to compliment the +built-in SMB filesystem in Linux. These clients allow access of SMB +shares and printing to SMB printers. + + +####################################################################### +%package common +Summary: Files used by both Samba servers and clients. +Group: Applications/System +Provides: samba-common = %{version}-%{release} + +%description common +Samba-common provides files necessary for both the server and client +packages of Samba. + + +####################################################################### +%package swat +Summary: The Samba SMB server configuration program. +Group: Applications/System +Requires: samba = %{version} xinetd +Provides: samba-swat = %{version}-%{release} + +%description swat +The samba-swat package includes the new SWAT (Samba Web Administration +Tool), for remotely managing Samba's smb.conf file using your favorite +Web browser. + +%ifarch i386 i486 i586 i686 ppc s390 +%package winbind-32bit +Summary: Samba winbind compatibility package for 32bit apps on 64bit archs +Group: Applications/System + +%description winbind-32bit +Compatibility package for 32 bit apps on 64 bit architecures +%endif + + +####################################################################### +%package doc +Summary: Samba Documentation +Group: Documentation/Other +Provides: samba-doc = %{version}-%{release} +Prereq: /usr/bin/find /bin/rm /usr/bin/xargs + +%description doc +The samba-doc package includes the HTML versions of the Samba manpages +utilized by SWAT as well as the HTML and PDF version of "Using Samba", +"Samba By Example", and "The Official Samba HOWTO and Reference Guide". + + +####################################################################### + +%prep +%setup -q + +# setup the vendor files (init scripts, etc...) +%setup -T -D -a 999 -n samba-%{version} -q + +%build + +/bin/cp setup/filter-requires-samba.sh %{SOURCE998} + +cd source +# RPM_OPT_FLAGS="$RPM_OPT_FLAGS -D_FILE_OFFSET_BITS=64" + +## check for ccache +# ccache -h 2>&1 > /dev/null +#if [ $? -eq 0 ]; then +# CC="ccache gcc" +#else + CC="gcc" +#fi + +## always run autogen.sh +./autogen.sh + +CFLAGS="$RPM_OPT_FLAGS $EXTRA -D_GNU_SOURCE" ./configure \ + --prefix=%{_prefix} \ + --localstatedir=/var \ + --with-configdir=%{_sysconfdir}/samba \ + --with-libdir=%{_libdir}/samba \ + --with-lockdir=/var/lib/samba \ + --with-logfilebase=/var/log/samba \ + --with-mandir=%{_mandir} \ + --with-piddir=/var/run \ + --with-privatedir=%{_sysconfdir}/samba \ + --with-sambabook=%{_datadir}/swat/using_samba \ + --with-swatdir=%{_datadir}/swat \ + --enable-cups \ + --with-acl-support \ + --with-ads \ + --with-automount \ + --with-fhs \ + --with-pam_smbpass \ + --with-libsmbclient \ + --with-libsmbsharemodes \ + --without-smbwrapper \ + --with-pam \ + --with-quotas \ + --with-shared-modules=idmap_rid,idmap_ad,idmap_tdb2 \ + --with-syslog \ + --with-utmp \ + --with-cluster-support \ + --with-ctdb=/usr/include \ + --without-ldb \ + --with-dnsupdate \ + --with-aio-support + +make showlayout + +make CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE" proto + +## check for gcc 3.4 or later +CC_VERSION=`${CC} --version | head -1 | awk '{print $3}'` +CC_MAJOR=`echo ${CC_VERSION} | cut -d. -f 1` +CC_MINOR=`echo ${CC_VERSION} | cut -d. -f 2` +if [ ${CC_MAJOR} -ge 3 ]; then + if [ ${CC_MAJOR} -gt 3 -o ${CC_MINOR} -ge 4 ]; then + make pch + fi +fi + + +make CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE" %{?_smp_mflags} \ + all modules pam_smbpass + +## build the cifs fs mount helper +cd client +gcc -o mount.cifs $RPM_OPT_FLAGS -D_GNU_SOURCE -Wall -D_GNU_SOURCE -D_LARGEFILE64_SOURCE mount.cifs.c +gcc -o umount.cifs $RPM_OPT_FLAGS -D_GNU_SOURCE -Wall -D_GNU_SOURCE -D_LARGEFILE64_SOURCE umount.cifs.c +cd .. + +# Remove some permission bits to avoid to many dependencies +cd .. +find examples docs -type f | xargs -r chmod -x + +%install +# Clean up in case there is trash left from a previous build +rm -rf $RPM_BUILD_ROOT + +# Create the target build directory hierarchy +mkdir -p $RPM_BUILD_ROOT%{_datadir}/swat/{help,include,using_samba/{figs,gifsa}} +mkdir -p $RPM_BUILD_ROOT%{_includedir} +mkdir -p $RPM_BUILD_ROOT%{_initrddir} +mkdir -p $RPM_BUILD_ROOT{%{_libdir},%{_includedir}} +mkdir -p $RPM_BUILD_ROOT%{_libdir}/samba/{auth,charset,idmap,vfs,pdb} +mkdir -p $RPM_BUILD_ROOT/%{_libarch}/security +mkdir -p $RPM_BUILD_ROOT%{_mandir} +mkdir -p $RPM_BUILD_ROOT%{_prefix}/{bin,sbin} +mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib +mkdir -p $RPM_BUILD_ROOT/sbin +mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/{logrotate.d,pam.d,samba} +mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/{pam.d,logrotate.d} +mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/rc.d/init.d +mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/{samba,sysconfig} +mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/xinetd.d +mkdir -p $RPM_BUILD_ROOT/var/lib/samba/winbindd_privileged +mkdir -p $RPM_BUILD_ROOT/var/{log,run/winbindd,spool}/samba + +cd source +make DESTDIR=$RPM_BUILD_ROOT \ + install +cd .. + +# pam_smbpass +cp source/bin/pam_smbpass.so $RPM_BUILD_ROOT/%{_libarch}/security/pam_smbpass.so + +# NSS & PAM winbind support +install -m 755 source/bin/pam_winbind.so $RPM_BUILD_ROOT/%{_libarch}/security/pam_winbind.so +install -m 755 source/nsswitch/libnss_winbind.so $RPM_BUILD_ROOT/%{_libarch}/libnss_winbind.so +install -m 755 source/nsswitch/libnss_wins.so $RPM_BUILD_ROOT/%{_libarch}/libnss_wins.so +( cd $RPM_BUILD_ROOT/%{_libarch}; + ln -sf libnss_winbind.so libnss_winbind.so.2; + ln -sf libnss_wins.so libnss_wins.so.2 ) + +# make install puts libsmbclient.so in the wrong place on x86_64 +rm -f $RPM_BUILD_ROOT/usr/lib*/samba/libsmbclient.so $RPM_BUILD_ROOT/usr/lib*/samba/libsmbclient.a || true +install -m 755 source/bin/libsmbclient.so $RPM_BUILD_ROOT%{_libdir}/libsmbclient.so +install -m 755 source/bin/libsmbclient.a $RPM_BUILD_ROOT%{_libdir}/libsmbclient.a +install -m 644 source/include/libsmbclient.h $RPM_BUILD_ROOT%{_includedir} +ln -s %{_libdir}/libsmbclient.so $RPM_BUILD_ROOT%{_libdir}/libsmbclient.so.0 + +# make install puts libmsrpc.so in the wrong place on x86_64 +#rm -f $RPM_BUILD_ROOT/usr/lib*/samba/libmsrpc.so $RPM_BUILD_ROOT/usr/lib*/samba/libmsrpc.a || true +#install -m 755 source/bin/libmsrpc.so $RPM_BUILD_ROOT%{_libdir}/libmsrpc.so +#install -m 755 source/bin/libmsrpc.a $RPM_BUILD_ROOT%{_libdir}/libmsrpc.a +#install -m 644 source/include/libmsrpc.h $RPM_BUILD_ROOT%{_includedir} +#rm -f $RPM_BUILD_ROOT%{_libdir}/samba/libmsrpc.* +#ln -s /%{_libdir}/libmsrpc.so $RPM_BUILD_ROOT%{_libdir}/libmsrpc.so.0 + +# make install puts libsmbsharemodes.so in the wrong place on x86_64 +rm -f $RPM_BUILD_ROOT/usr/lib*/samba/libsmbsharemodes.so $RPM_BUILD_ROOT/usr/lib*/samba/libsmbsharemodes.a || true +install -m 755 source/bin/libsmbsharemodes.so $RPM_BUILD_ROOT%{_libdir}/libsmbsharemodes.so +install -m 755 source/bin/libsmbsharemodes.a $RPM_BUILD_ROOT%{_libdir}/libsmbsharemodes.a +install -m 644 source/include/smb_share_modes.h $RPM_BUILD_ROOT%{_includedir} +rm -f $RPM_BUILD_ROOT%{_libdir}/samba/libsmbsharemodes.* +ln -s /%{_libdir}/libsmbsharemodes.so $RPM_BUILD_ROOT%{_libdir}/libsmbsharemodes.so.0 + +# Install pam_smbpass.so +install -m755 source/bin/pam_smbpass.so $RPM_BUILD_ROOT/%{_libarch}/security/pam_smbpass.so + +# +ln -s %{_libdir}/samba/libwbclient.so $RPM_BUILD_ROOT/%{_libdir}/libwbclient.so.0 +ln -s %{_libdir}/samba/libtalloc.so $RPM_BUILD_ROOT/%{_libdir}/libtalloc.so.1 +ln -s %{_libdir}/samba/libtdb.so $RPM_BUILD_ROOT/%{_libdir}/libtdb.so.0 +ln -s %{_libdir}/samba/libnetapi.so $RPM_BUILD_ROOT/%{_libdir}/libnetapi.so.0 + +## cleanup +/bin/rm -rf $RPM_BUILD_ROOT/usr/lib*/samba/security + +# we need a symlink for mount to recognise the smb and smbfs filesystem types +#ln -sf %{_prefix}/bin/smbmount $RPM_BUILD_ROOT/sbin/mount.smbfs +#ln -sf %{_prefix}/bin/smbmount $RPM_BUILD_ROOT/sbin/mount.smb +#/bin/rm -f $RPM_BUILD_ROOT/mount.smbfs + +# Install the miscellany +echo 127.0.0.1 localhost > $RPM_BUILD_ROOT%{_sysconfdir}/samba/lmhosts + +install -m644 setup/samba.log $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/samba +install -m644 setup/swat $RPM_BUILD_ROOT%{_sysconfdir}/xinetd.d/swat +install -m644 setup/samba.sysconfig $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/samba +install -m755 setup/smb.init $RPM_BUILD_ROOT%{initdir}/smb +install -m755 setup/winbind.init $RPM_BUILD_ROOT%{initdir}/winbind +install -m644 setup/samba.pamd $RPM_BUILD_ROOT%{_sysconfdir}/pam.d/samba +install -m755 setup/smbprint $RPM_BUILD_ROOT%{_bindir} +install -m644 setup/smbusers $RPM_BUILD_ROOT%{_sysconfdir}/samba/smbusers +install -m644 setup/smb.conf $RPM_BUILD_ROOT%{_sysconfdir}/samba/smb.conf +install -m755 source/client/mount.cifs $RPM_BUILD_ROOT/sbin/mount.cifs +install -m755 source/client/umount.cifs $RPM_BUILD_ROOT/sbin/umount.cifs +install -m755 source/script/mksmbpasswd.sh $RPM_BUILD_ROOT%{_bindir} + +/bin/rm $RPM_BUILD_ROOT%{_sbindir}/*mount.cifs + +ln -s ../..%{initdir}/smb $RPM_BUILD_ROOT%{_sbindir}/samba +ln -s ../..%{initdir}/winbind $RPM_BUILD_ROOT%{_sbindir}/winbind + +# Remove "*.old" files +find $RPM_BUILD_ROOT -name "*.old" -exec rm -f {} \; + +## don't duplicate the docs. These are installed by/with SWAT +rm -rf docs/htmldocs +rm -rf docs/manpages +( cd docs; ln -s %{_prefix}/share/swat/help htmldocs ) + +## +## Clean out man pages for tools not installed here +## +rm -f $RPM_BUILD_ROOT%{_mandir}/man1/log2pcap.1* +rm -f $RPM_BUILD_ROOT%{_mandir}/man1/smbsh.1* +rm -f $RPM_BUILD_ROOT%{_mandir}/man5/vfstest.1* + + +%clean +rm -rf $RPM_BUILD_ROOT + +%post +## deal with an upgrade from a broken 3.0.21b RPM +if [ "$1" -eq "2" ]; then + if [ -d /var/cache/samba ]; then + for file in `ls /var/cache/samba/*tdb`; do + /bin/cp -up $file /var/lib/samba/`basename $file` + done + mkdir -p /var/lib/samba/eventlog + for file in `ls /var/cache/samba/eventlog/*tdb`; do + /bin/cp -up $file /var/lib/samba/eventlog/`basename $file` + done + /bin/mv /var/cache/samba /var/cache/samba.moved + fi +fi + +%preun +if [ $1 = 0 ] ; then + /sbin/chkconfig --del smb + /sbin/chkconfig --del winbind + # rm -rf /var/log/samba/* /var/lib/samba/* + /sbin/service smb stop >/dev/null 2>&1 +fi +exit 0 + +%postun +if [ "$1" -ge "1" ]; then + %{initdir}/smb restart >/dev/null 2>&1 +fi + + +%post swat +# Add swat entry to /etc/services if not already there. +if [ ! "`grep ^\s**swat /etc/services`" ]; then + echo 'swat 901/tcp # Add swat service used via inetd' >> /etc/services +fi + +%post common +/sbin/ldconfig + +%postun common +/sbin/ldconfig + +####################################################################### +## Files section ## +####################################################################### + +%files +%defattr(-,root,root) + +%config(noreplace) %{_sysconfdir}/sysconfig/samba +%config(noreplace) %{_sysconfdir}/samba/smbusers +%attr(755,root,root) %config %{initdir}/smb +%attr(755,root,root) %config %{initdir}/winbind +%config(noreplace) %{_sysconfdir}/logrotate.d/samba +%config(noreplace) %{_sysconfdir}/pam.d/samba + +%attr(0755,root,root) %dir /var/log/samba +%attr(0755,root,root) %dir /var/lib/samba +%attr(1777,root,root) %dir /var/spool/samba + +%{_sbindir}/samba +%{_sbindir}/winbind + +%{_sbindir}/smbd +%{_sbindir}/nmbd + +%{_bindir}/mksmbpasswd.sh +%{_bindir}/smbcontrol +%{_bindir}/smbstatus +%{_bindir}/tdbbackup +%{_bindir}/tdbtool +%{_bindir}/tdbdump +%{_bindir}/eventlogadm + +%{_libdir}/samba/idmap/*.so +%{_libdir}/samba/nss_info/*.so +%{_libdir}/samba/vfs/*.so +%{_libdir}/samba/auth/*.so + +%{_mandir}/man1/smbcontrol.1* +%{_mandir}/man1/smbstatus.1* +%{_mandir}/man1/vfstest.1* +%{_mandir}/man5/smbpasswd.5* +%{_mandir}/man7/samba.7* +%{_mandir}/man8/nmbd.8* +%{_mandir}/man8/pdbedit.8* +%{_mandir}/man8/smbd.8* +%{_mandir}/man8/tdbbackup.8* +%{_mandir}/man8/tdbdump.8* +%{_mandir}/man8/tdbtool.8* +%{_mandir}/man8/eventlogadm.8* +%{_mandir}/man8/vfs_*.8* +%{_mandir}/man8/idmap_*.8* + + +########## + +%files doc +%defattr(-,root,root) +%doc README COPYING Manifest +%doc WHATSNEW.txt Roadmap +%doc docs +%doc examples/autofs examples/LDAP examples/libsmbclient examples/misc examples/printer-accounting +%doc examples/printing + +########## + +%files swat +%defattr(-,root,root) +%config(noreplace) %{_sysconfdir}/xinetd.d/swat +%dir %{_datadir}/swat +%{_datadir}/swat/* +%{_sbindir}/swat +%{_mandir}/man8/swat.8* +%attr(755,root,root) %{_libdir}/samba/*.msg + +########## + +%files client +%defattr(-,root,root) +#/sbin/mount.smb +#/sbin/mount.smbfs +/sbin/mount.cifs +/sbin/umount.cifs + +%{_bindir}/rpcclient +%{_bindir}/smbcacls +#%{_bindir}/smbmount +#%{_bindir}/smbmnt +#%{_bindir}/smbumount +%{_bindir}/findsmb +%{_bindir}/nmblookup +%{_bindir}/smbget +%{_bindir}/smbclient +%{_bindir}/smbprint +%{_bindir}/smbspool +%{_bindir}/smbtar +%{_bindir}/smbtree + +#%{_mandir}/man8/smbmnt.8* +#%{_mandir}/man8/smbmount.8* +#%{_mandir}/man8/smbumount.8* +%{_mandir}/man8/mount.cifs.8.* +%{_mandir}/man8/umount.cifs.8.* +%{_mandir}/man8/smbspool.8* +%{_mandir}/man1/smbget.1* +%{_mandir}/man5/smbgetrc.5* +%{_mandir}/man1/findsmb.1* +%{_mandir}/man1/nmblookup.1* +%{_mandir}/man1/rpcclient.1* +%{_mandir}/man1/smbcacls.1* +%{_mandir}/man1/smbclient.1* +%{_mandir}/man1/smbtar.1* +%{_mandir}/man1/smbtree.1* + +########## + +%files common +%defattr(-,root,root) +%dir %{_sysconfdir}/samba +%dir %{_libdir}/samba +%dir %{_libdir}/samba/charset +%config(noreplace) %{_sysconfdir}/samba/smb.conf +%config(noreplace) %{_sysconfdir}/samba/lmhosts +%{_initrddir}/winbind + +%attr(755,root,root) /%{_libarch}/libnss_wins.so* +%attr(755,root,root) /%{_libarch}/libnss_winbind.so* +%attr(755,root,root) /%{_libarch}/security/pam_winbind.so +%attr(755,root,root) /%{_libarch}/security/pam_smbpass.so + +%{_includedir}/libsmbclient.h +%{_libdir}/libsmbclient.* +#%{_includedir}/libmsrpc.h +#%{_libdir}/libmsrpc.* +%{_includedir}/smb_share_modes.h +%{_libdir}/libsmbsharemodes.* + +%{_libdir}/samba/*.dat +%{_libdir}/samba/charset/*.so + +%{_includedir}/netapi.h +%{_includedir}/wbclient.h +%{_includedir}/talloc.h +%{_includedir}/tdb.h +%{_libdir}/samba/libnetapi.so* +%{_libdir}/libnetapi.so* +%{_libdir}/samba/libtalloc.so* +%{_libdir}/libtalloc.so* +%{_libdir}/samba/libtdb.so* +%{_libdir}/libtdb.so* +%{_libdir}/samba/libwbclient.so* +%{_libdir}/libwbclient.so* + +%{_sbindir}/winbindd +%{_bindir}/testparm +%{_bindir}/smbpasswd +%{_bindir}/profiles +%{_bindir}/net +%{_bindir}/ldbadd +%{_bindir}/ldbdel +%{_bindir}/ldbedit +%{_bindir}/ldbmodify +%{_bindir}/ldbsearch +%{_bindir}/wbinfo +%{_bindir}/ntlm_auth +%{_bindir}/pdbedit +%{_bindir}/smbcquotas + +%{_mandir}/man1/ntlm_auth.1* +%{_mandir}/man1/profiles.1* +%{_mandir}/man1/smbcquotas.1* +%{_mandir}/man1/testparm.1* +%{_mandir}/man5/smb.conf.5* +%{_mandir}/man5/lmhosts.5* +%{_mandir}/man8/smbpasswd.8* +%{_mandir}/man1/wbinfo.1* +%{_mandir}/man8/winbindd.8* +%{_mandir}/man8/net.8* +%{_mandir}/man7/pam_winbind.7* +%{_mandir}/man7/libsmbclient.7* + +%ifarch i386 i486 i586 i686 ppc s390 +%files winbind-32bit +%attr(755,root,root) /%{_libarch}/libnss_winbind.so* +%attr(755,root,root) /%{_libarch}/libnss_wins.so* +%attr(755,root,root) /%{_libarch}/security/pam_winbind.so +%endif + + +%changelog +* Fri Jan 16 2004 Gerald (Jerry) Carter +- Removed ChangeLog entries since they are kept in CVS + + + diff --git a/packaging/RHEL-CTDB/setup/filter-requires-samba.sh b/packaging/RHEL-CTDB/setup/filter-requires-samba.sh new file mode 100755 index 0000000000..f90085ce35 --- /dev/null +++ b/packaging/RHEL-CTDB/setup/filter-requires-samba.sh @@ -0,0 +1,4 @@ +#!/bin/sh + +/usr/lib/rpm/perl.req $* | grep -E -v '(Net::LDAP|Crypt::SmbHash|CGI|Unicode::MapUTF8)' + diff --git a/packaging/RHEL-CTDB/setup/samba.log b/packaging/RHEL-CTDB/setup/samba.log new file mode 100644 index 0000000000..a3c000ea78 --- /dev/null +++ b/packaging/RHEL-CTDB/setup/samba.log @@ -0,0 +1,9 @@ +/var/log/samba/*.log /var/log/samba/log.smbd /var/log/samba/log.nmbd { + notifempty + missingok + sharedscripts + copytruncate + postrotate + /bin/kill -HUP `cat /var/run/smbd.pid /var/run/nmbd.pid /var/run/winbindd.pid 2> /dev/null` 2> /dev/null || true + endscript +} diff --git a/packaging/RHEL-CTDB/setup/samba.pamd b/packaging/RHEL-CTDB/setup/samba.pamd new file mode 100644 index 0000000000..8c529da3a1 --- /dev/null +++ b/packaging/RHEL-CTDB/setup/samba.pamd @@ -0,0 +1,4 @@ +auth required pam_stack.so service=system-auth +session required pam_stack.so service=system-auth +account required pam_stack.so service=system-auth +password required pam_stack.so service=system-auth diff --git a/packaging/RHEL-CTDB/setup/samba.sysconfig b/packaging/RHEL-CTDB/setup/samba.sysconfig new file mode 100644 index 0000000000..944b72fcc2 --- /dev/null +++ b/packaging/RHEL-CTDB/setup/samba.sysconfig @@ -0,0 +1,6 @@ +# Options to smbd +SMBDOPTIONS="-D" +# Options to nmbd +NMBDOPTIONS="-D" +# Options for winbindd +WINBINDOPTIONS="" diff --git a/packaging/RHEL-CTDB/setup/smb.conf b/packaging/RHEL-CTDB/setup/smb.conf new file mode 100644 index 0000000000..971ca19c83 --- /dev/null +++ b/packaging/RHEL-CTDB/setup/smb.conf @@ -0,0 +1,271 @@ +# This is the main Samba configuration file. You should read the +# smb.conf(5) manual page in order to understand the options listed +# here. Samba has a huge number of configurable options (perhaps too +# many!) most of which are not shown in this example +# +# For a step to step guide on installing, configuring and using samba, +# read the Samba-HOWTO-Collection. This may be obtained from: +# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf +# +# Many working examples of smb.conf files can be found in the +# Samba-Guide which is generated daily and can be downloaded from: +# http://www.samba.org/samba/docs/Samba-Guide.pdf +# +# Any line which starts with a ; (semi-colon) or a # (hash) +# is a comment and is ignored. In this example we will use a # +# for commentry and a ; for parts of the config file that you +# may wish to enable +# +# NOTE: Whenever you modify this file you should run the command "testparm" +# to check that you have not made any basic syntactic errors. +# +#======================= Global Settings ===================================== +[global] + +# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH + workgroup = MYGROUP + +# server string is the equivalent of the NT Description field + server string = Samba Server + +# Security mode. Defines in which mode Samba will operate. Possible +# values are share, user, server, domain and ads. Most people will want +# user level security. See the Samba-HOWTO-Collection for details. + security = user + +# This option is important for security. It allows you to restrict +# connections to machines which are on your local network. The +# following example restricts access to two C class networks and +# the "loopback" interface. For more examples of the syntax see +# the smb.conf man page +; hosts allow = 192.168.1. 192.168.2. 127. + +# If you want to automatically load your printer list rather +# than setting them up individually then you'll need this + load printers = yes + +# you may wish to override the location of the printcap file +; printcap name = /etc/printcap + +# on SystemV system setting printcap name to lpstat should allow +# you to automatically obtain a printer list from the SystemV spool +# system +; printcap name = lpstat + +# It should not be necessary to specify the print system type unless +# it is non-standard. Currently supported print systems include: +# bsd, cups, sysv, plp, lprng, aix, hpux, qnx +; printing = cups + +# Uncomment this if you want a guest account, you must add this to /etc/passwd +# otherwise the user "nobody" is used +; guest account = pcguest + +# this tells Samba to use a separate log file for each machine +# that connects + log file = /usr/local/samba/var/log.%m + +# Put a capping on the size of the log files (in Kb). + max log size = 50 + +# Use password server option only with security = server +# The argument list may include: +# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] +# or to auto-locate the domain controller/s +# password server = * +; password server = + +# Use the realm option only with security = ads +# Specifies the Active Directory realm the host is part of +; realm = MY_REALM + +# Backend to store user information in. New installations should +# use either tdbsam or ldapsam. smbpasswd is available for backwards +# compatibility. tdbsam requires no further configuration. +; passdb backend = tdbsam + +# Using the following line enables you to customise your configuration +# on a per machine basis. The %m gets replaced with the netbios name +# of the machine that is connecting. +# Note: Consider carefully the location in the configuration file of +# this line. The included file is read at that point. +; include = /usr/local/samba/lib/smb.conf.%m + +# Configure Samba to use multiple interfaces +# If you have multiple network interfaces then you must list them +# here. See the man page for details. +; interfaces = 192.168.12.2/24 192.168.13.2/24 + +# Browser Control Options: +# set local master to no if you don't want Samba to become a master +# browser on your network. Otherwise the normal election rules apply +; local master = no + +# OS Level determines the precedence of this server in master browser +# elections. The default value should be reasonable +; os level = 33 + +# Domain Master specifies Samba to be the Domain Master Browser. This +# allows Samba to collate browse lists between subnets. Don't use this +# if you already have a Windows NT domain controller doing this job +; domain master = yes + +# Preferred Master causes Samba to force a local browser election on startup +# and gives it a slightly higher chance of winning the election +; preferred master = yes + +# Enable this if you want Samba to be a domain logon server for +# Windows95 workstations. +; domain logons = yes + +# if you enable domain logons then you may want a per-machine or +# per user logon script +# run a specific logon batch file per workstation (machine) +; logon script = %m.bat +# run a specific logon batch file per username +; logon script = %U.bat + +# Where to store roving profiles (only for Win95 and WinNT) +# %L substitutes for this servers netbios name, %U is username +# You must uncomment the [Profiles] share below +; logon path = \\%L\Profiles\%U + +# Windows Internet Name Serving Support Section: +# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server +; wins support = yes + +# WINS Server - Tells the NMBD components of Samba to be a WINS Client +# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both +; wins server = w.x.y.z + +# WINS Proxy - Tells Samba to answer name resolution queries on +# behalf of a non WINS capable client, for this to work there must be +# at least one WINS Server on the network. The default is NO. +; wins proxy = yes + +# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names +# via DNS nslookups. The default is NO. + dns proxy = no + +# These scripts are used on a domain controller or stand-alone +# machine to add or delete corresponding unix accounts +; add user script = /usr/sbin/useradd %u +; add group script = /usr/sbin/groupadd %g +; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u +; delete user script = /usr/sbin/userdel %u +; delete user from group script = /usr/sbin/deluser %u %g +; delete group script = /usr/sbin/groupdel %g + + +#============================ Share Definitions ============================== +[homes] + comment = Home Directories + browseable = no + writable = yes + +# Un-comment the following and create the netlogon directory for Domain Logons +; [netlogon] +; comment = Network Logon Service +; path = /usr/local/samba/lib/netlogon +; guest ok = yes +; writable = no +; share modes = no + + +# Un-comment the following to provide a specific roving profile share +# the default is to use the user's home directory +;[Profiles] +; path = /usr/local/samba/profiles +; browseable = no +; guest ok = yes + + +# NOTE: If you have a BSD-style print system there is no need to +# specifically define each individual printer +[printers] + comment = All Printers + path = /usr/spool/samba + browseable = no +# Set public = yes to allow user 'guest account' to print + guest ok = no + writable = no + printable = yes + +# This one is useful for people to share files +;[tmp] +; comment = Temporary file space +; path = /tmp +; read only = no +; public = yes + +# A publicly accessible directory, but read only, except for people in +# the "staff" group +;[public] +; comment = Public Stuff +; path = /home/samba +; public = yes +; writable = yes +; printable = no +; write list = @staff + +# Other examples. +# +# A private printer, usable only by fred. Spool data will be placed in fred's +# home directory. Note that fred must have write access to the spool directory, +# wherever it is. +;[fredsprn] +; comment = Fred's Printer +; valid users = fred +; path = /homes/fred +; printer = freds_printer +; public = no +; writable = no +; printable = yes + +# A private directory, usable only by fred. Note that fred requires write +# access to the directory. +;[fredsdir] +; comment = Fred's Service +; path = /usr/somewhere/private +; valid users = fred +; public = no +; writable = yes +; printable = no + +# a service which has a different directory for each machine that connects +# this allows you to tailor configurations to incoming machines. You could +# also use the %U option to tailor it by user name. +# The %m gets replaced with the machine name that is connecting. +;[pchome] +; comment = PC Directories +; path = /usr/pc/%m +; public = no +; writable = yes + +# A publicly accessible directory, read/write to all users. Note that all files +# created in the directory by users will be owned by the default user, so +# any user with access can delete any other user's files. Obviously this +# directory must be writable by the default user. Another user could of course +# be specified, in which case all files would be owned by that user instead. +;[public] +; path = /usr/somewhere/else/public +; public = yes +; only guest = yes +; writable = yes +; printable = no + +# The following two entries demonstrate how to share a directory so that two +# users can place files there that will be owned by the specific users. In this +# setup, the directory should be writable by both users and should have the +# sticky bit set on it to prevent abuse. Obviously this could be extended to +# as many users as required. +;[myshare] +; comment = Mary's and Fred's stuff +; path = /usr/somewhere/shared +; valid users = mary fred +; public = no +; writable = yes +; printable = no +; create mask = 0765 + + diff --git a/packaging/RHEL-CTDB/setup/smb.init b/packaging/RHEL-CTDB/setup/smb.init new file mode 100644 index 0000000000..af85b2c079 --- /dev/null +++ b/packaging/RHEL-CTDB/setup/smb.init @@ -0,0 +1,135 @@ +#!/bin/sh +# +# chkconfig: - 91 35 +# description: Starts and stops the Samba smbd and nmbd daemons \ +# used to provide SMB network services. +# +# pidfile: /var/run/samba/smbd.pid +# pidfile: /var/run/samba/nmbd.pid +# config: /etc/samba/smb.conf + + +# Source function library. +if [ -f /etc/init.d/functions ] ; then + . /etc/init.d/functions +elif [ -f /etc/rc.d/init.d/functions ] ; then + . /etc/rc.d/init.d/functions +else + exit 0 +fi + +# Avoid using root's TMPDIR +unset TMPDIR + +# Source networking configuration. +. /etc/sysconfig/network + +if [ -f /etc/sysconfig/samba ]; then + . /etc/sysconfig/samba +fi + +# Check that networking is up. +[ ${NETWORKING} = "no" ] && exit 0 + +# Check that smb.conf exists. +[ -f /etc/samba/smb.conf ] || exit 0 + +# Check that we can write to it... so non-root users stop here +[ -w /etc/samba/smb.conf ] || exit 0 + +# Check whether "netbios disabled" is true +ISNETBIOSDISABLED=$(testparm -s 2>/dev/null | \ + sed -n '/\[global\]/,/^$/p' | \ + grep "disable netbios = Yes" | \ + awk 'BEGIN{FS=" = "}{print $2}') + + +RETVAL=0 + + +start() { + KIND="SMB" + echo -n $"Starting $KIND services: " + daemon smbd $SMBDOPTIONS + RETVAL=$? + echo + KIND="NMB" + if [ x"$ISNETBIOSDISABLED" != x"Yes" ]; then + echo -n $"Starting $KIND services: " + daemon nmbd $NMBDOPTIONS + RETVAL2=$? + echo + [ $RETVAL -eq 0 -a $RETVAL2 -eq 0 ] && touch /var/lock/subsys/smb || \ + RETVAL=1 + else + [ $RETVAL -eq 0 ] && touch /var/lock/subsys/smb || \ + RETVAL=1 + fi + return $RETVAL +} + +stop() { + KIND="SMB" + echo -n $"Shutting down $KIND services: " + killproc smbd + RETVAL=$? + [ $RETVAL -eq 0 ] && rm -f /var/run/smbd.pid + echo + KIND="NMB" + if [ x"$ISNETBIOSDISABLED" != x"Yes" ]; then + echo -n $"Shutting down $KIND services: " + killproc nmbd + RETVAL2=$? + [ $RETVAL2 -eq 0 ] && rm -f /var/run/nmbd.pid + [ $RETVAL -eq 0 -a $RETVAL2 -eq 0 ] && rm -f /var/lock/subsys/smb + echo "" + else + [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/smb + echo "" + fi + return $RETVAL +} + +restart() { + stop + start +} + +reload() { + echo -n $"Reloading smb.conf file: " + killproc smbd -HUP + RETVAL=$? + echo + return $RETVAL +} + +rhstatus() { + status smbd + status nmbd +} + +case "$1" in + start) + start + ;; + stop) + stop + ;; + restart) + restart + ;; + reload) + reload + ;; + status) + rhstatus + ;; + condrestart) + [ -f /var/lock/subsys/smb ] && restart || : + ;; + *) + echo $"Usage: $0 {start|stop|restart|reload|status|condrestart}" + exit 1 +esac + +exit $? diff --git a/packaging/RHEL-CTDB/setup/smbprint b/packaging/RHEL-CTDB/setup/smbprint new file mode 100644 index 0000000000..1c3959d49b --- /dev/null +++ b/packaging/RHEL-CTDB/setup/smbprint @@ -0,0 +1,84 @@ +#!/bin/sh +# This script is an input filter for printcap printing on a unix machine. It +# uses the smbclient program to print the file to the specified smb-based +# server and service. +# For example you could have a printcap entry like this +# +# smb:lp=/dev/null:sd=/usr/spool/smb:sh:if=/usr/local/samba/smbprint +# +# which would create a unix printer called "smb" that will print via this +# script. You will need to create the spool directory /usr/spool/smb with +# appropriate permissions and ownerships for your system. + +# Set these to the server and service you wish to print to +# In this example I have a WfWg PC called "lapland" that has a printer +# exported called "printer" with no password. + +# +# Script further altered by hamiltom@ecnz.co.nz (Michael Hamilton) +# so that the server, service, and password can be read from +# a /usr/var/spool/lpd/PRINTNAME/.config file. +# +# In order for this to work the /etc/printcap entry must include an +# accounting file (af=...): +# +# cdcolour:\ +# :cm=CD IBM Colorjet on 6th:\ +# :sd=/var/spool/lpd/cdcolour:\ +# :af=/var/spool/lpd/cdcolour/acct:\ +# :if=/usr/local/etc/smbprint:\ +# :mx=0:\ +# :lp=/dev/null: +# +# The /usr/var/spool/lpd/PRINTNAME/.config file should contain: +# share=PC_SERVER +# user="user" +# password="password" +# +# Please, do not modify the order in the file. +# Example: +# share=\\server\deskjet +# user="fred" +# password="" + +# +# The last parameter to the filter is the accounting file name. +# Extract the directory name from the file name. +# Concat this with /.config to get the config file. +# +eval acct_file=\${$#} +spool_dir=`dirname $acct_file` +config_file=$spool_dir/.config + +# Should read the following variables set in the config file: +# share +# hostip +# user +# password + +eval `cat $config_file` + +share=`echo $share | sed "s/[\]/\//g"` + +if [ "$user" != "" ]; then + usercmd="-U" +else + usercmd="" +fi + +if [ "$workgroup" != "" ]; then + workgroupcmd="-W" +else + workgroupcmd="" +fi + +if [ "$translate" = "yes" ]; then + command="translate ; print -" +else + command="print -" +fi +#echo $share $password $translate $x_command > /tmp/smbprint.log + +cat | /usr/bin/smbclient "$share" "$password" -E ${hostip:+-I} \ + $hostip -N -P $usercmd "$user" $workgroupcmd "$workgroup" \ + -c "$command" 2>/dev/null diff --git a/packaging/RHEL-CTDB/setup/smbusers b/packaging/RHEL-CTDB/setup/smbusers new file mode 100644 index 0000000000..ae3389f53f --- /dev/null +++ b/packaging/RHEL-CTDB/setup/smbusers @@ -0,0 +1,3 @@ +# Unix_name = SMB_name1 SMB_name2 ... +root = administrator admin +nobody = guest pcguest smbguest diff --git a/packaging/RHEL-CTDB/setup/swat b/packaging/RHEL-CTDB/setup/swat new file mode 100644 index 0000000000..8b62348dde --- /dev/null +++ b/packaging/RHEL-CTDB/setup/swat @@ -0,0 +1,15 @@ +# default: off +# description: SWAT is the Samba Web Admin Tool. Use swat \ +# to configure your Samba server. To use SWAT, \ +# connect to port 901 with your favorite web browser. +service swat +{ + port = 901 + socket_type = stream + wait = no + only_from = 127.0.0.1 + user = root + server = /usr/sbin/swat + log_on_failure += USERID + disable = yes +} diff --git a/packaging/RHEL-CTDB/setup/swat.desktop b/packaging/RHEL-CTDB/setup/swat.desktop new file mode 100644 index 0000000000..0d7b4b5c48 --- /dev/null +++ b/packaging/RHEL-CTDB/setup/swat.desktop @@ -0,0 +1,8 @@ +[Desktop Entry] +Name=Samba Configuration +Name[de]=Samba Konfiguration +Type=Application +Comment=Configure Samba with a web based interface +Exec=htmlview http://127.0.0.1:901/ +Terminal=false +Categories=X-Red-Hat-Extra;Application;System;X-Red-Hat-ServerConfig; diff --git a/packaging/RHEL-CTDB/setup/winbind.init b/packaging/RHEL-CTDB/setup/winbind.init new file mode 100644 index 0000000000..a99038f9c7 --- /dev/null +++ b/packaging/RHEL-CTDB/setup/winbind.init @@ -0,0 +1,100 @@ +#!/bin/sh +# +# chkconfig: - 91 35 +# description: Starts and stops the Samba winbind daemon +# # +# pidfile: /var/cache/samba/winbind.pid +# config: /etc/samba/smb.conf + + +# Source function library. +if [ -f /etc/init.d/functions ] ; then + . /etc/init.d/functions +elif [ -f /etc/rc.d/init.d/functions ] ; then + . /etc/rc.d/init.d/functions +else + exit 0 +fi + +# Avoid using root's TMPDIR +unset TMPDIR + +# Source networking configuration. +. /etc/sysconfig/network + +if [ -f /etc/sysconfig/samba ]; then + . /etc/sysconfig/samba +fi + +# Check that networking is up. +[ ${NETWORKING} = "no" ] && exit 0 + +# Check that smb.conf exists. +[ -f /etc/samba/smb.conf ] || exit 0 + +RETVAL=0 + + +start() { + KIND="Winbind" + echo -n $"Starting $KIND services: " + daemon winbindd "$WINBINDOPTIONS" + RETVAL=$? + echo + [ $RETVAL -eq 0 ] && touch /var/lock/subsys/winbindd || RETVAL=1 + return $RETVAL +} + +stop() { + echo + KIND="Winbind" + echo -n $"Shutting down $KIND services: " + killproc winbindd + RETVAL=$? + [ $RETVAL -eq 0 ] && rm -f /var/run/winbindd.pid && rm -f /var/lock/subsys/winbindd + echo "" + return $RETVAL +} + +restart() { + stop + start +} + +reload() { + echo -n $"Reloading smb.conf file: " + killproc winbindd -HUP + RETVAL=$? + echo + return $RETVAL +} + +rhstatus() { + status winbindd +} + +case "$1" in + start) + start + ;; + stop) + stop + ;; + restart) + restart + ;; + reload) + reload + ;; + status) + rhstatus + ;; + condrestart) + [ -f /var/lock/subsys/winbindd ] && restart || : + ;; + *) + echo $"Usage: $0 {start|stop|restart|reload|status|condrestart}" + exit 1 +esac + +exit $? diff --git a/packaging/RHEL4-CTDB/README b/packaging/RHEL4-CTDB/README deleted file mode 100644 index 131682089e..0000000000 --- a/packaging/RHEL4-CTDB/README +++ /dev/null @@ -1,3 +0,0 @@ -In order to keep the docs out of the bzr tree, first get a release -tarball of samba, then invoke makerpms.sh with the DOCS_DIR variable -pointing to the docs dir of that samba tarball. diff --git a/packaging/RHEL4-CTDB/configure.rpm b/packaging/RHEL4-CTDB/configure.rpm deleted file mode 100644 index e1a58ddb3b..0000000000 --- a/packaging/RHEL4-CTDB/configure.rpm +++ /dev/null @@ -1,34 +0,0 @@ - -CFLAGS="-Wall -g -D_GNU_SOURCE" ./configure \ - --prefix=/usr \ - --localstatedir=/var \ - --with-configdir=/etc/samba \ - --with-libdir=/usr/lib/samba \ - --with-lockdir=/var/lib/samba \ - --with-logfilebase=/var/log/samba \ - --with-mandir=/usr/man \ - --with-piddir=/var/run \ - --with-privatedir=/etc/samba \ - --with-sambabook=/usr/share/swat/using_samba \ - --with-swatdir=/usr/share/swat \ - --enable-cups \ - --with-acl-support \ - --with-ads \ - --with-automount \ - --with-fhs \ - --with-pam_smbpass \ - --with-libsmbclient \ - --with-libsmbsharemodes \ - --without-smbwrapper \ - --with-pam \ - --with-quotas \ - --with-shared-modules=idmap_rid,idmap_ad \ - --with-smbmount \ - --with-syslog \ - --with-utmp \ - --with-cluster-support \ - --with-ctdb=/usr/include \ - --without-ldb \ - --with-dnsupdate \ - --with-aio-support \ - $* diff --git a/packaging/RHEL4-CTDB/makerpms.sh b/packaging/RHEL4-CTDB/makerpms.sh deleted file mode 100755 index 671519453d..0000000000 --- a/packaging/RHEL4-CTDB/makerpms.sh +++ /dev/null @@ -1,102 +0,0 @@ -#!/bin/sh -# Copyright (C) John H Terpstra 1998-2002 -# Gerald (Jerry) Carter 2003 - -# The following allows environment variables to override the target directories -# the alternative is to have a file in your home directory calles .rpmmacros -# containing the following: -# %_topdir /home/mylogin/redhat -# -# Note: Under this directory rpm expects to find the same directories that are under the -# /usr/src/redhat directory -# - -# set DOCS_DIR to the path to a release tarball docs dir in order to get docs -EXTRA_OPTIONS="$1" - -SPECDIR=`rpm --eval %_specdir` -SRCDIR=`rpm --eval %_sourcedir` - -# At this point the SPECDIR and SRCDIR vaiables must have a value! - -USERID=`id -u` -GRPID=`id -g` -VERSION='3.2.0' -REVISION='ctdb' -SPECFILE="samba.spec" -RPMVER=`rpm --version | awk '{print $3}'` -RPM="rpmbuild" - -## -## Check the RPM version (paranoid) -## -case $RPMVER in - 4*) - echo "Supported RPM version [$RPMVER]" - ;; - *) - echo "Unknown RPM version: `rpm --version`" - exit 1 - ;; -esac - -pushd . -cd ../../source -if [ -f Makefile ]; then - make distclean -fi -popd - -pushd . -cd ../../ -SRCTREE=`basename $PWD` -if [ $DOCS_DIR ] && [ -d $DOCS_DIR ]; then - mv docs docs-orig - ln -s $DOCS_DIR docs -fi -cd ../ -chown -R ${USERID}.${GRPID} $SRCTREE -if [ ! -d samba-${VERSION} ]; then - ln -s $SRCTREE samba-${VERSION} || exit 1 -fi -echo -n "Creating samba-${VERSION}.tar.bz2 ... " -tar --exclude=.svn --exclude=.bzr --exclude=.bzrignore --exclude=docs-orig -chf - samba-${VERSION}/. | bzip2 > ${SRCDIR}/samba-${VERSION}.tar.bz2 -echo "Done." -if [ $? -ne 0 ]; then - popd - cd ../../ - # restore original structure if docs were specified - if [ ${DOCS_DIR} ] && [ -d docs-orig ] && [ -L docs ]; then - rm docs - mv docs-orig docs - fi - echo "Build failed!" - exit 1 -fi - -popd - - -## -## copy additional source files -## -chmod 755 setup/filter-requires-samba.sh -tar --exclude=.svn -jcvf - setup > ${SRCDIR}/setup.tar.bz2 -cp -p ${SPECFILE} ${SPECDIR} - -## -## Build -## -echo "$(basename $0): Getting Ready to build release package" -cd ${SPECDIR} -${RPM} -ba --clean --rmsource $EXTRA_OPTIONS $SPECFILE - -# restore original structure if docs were specified -cd ../../ -if [ ${DOCS_DIR} ] && [ -d docs-orig ] && [ -L docs ]; then - rm docs - mv -f docs-orig docs -fi - -echo "$(basename $0): Done." - diff --git a/packaging/RHEL4-CTDB/samba.spec b/packaging/RHEL4-CTDB/samba.spec deleted file mode 100644 index eae45dd521..0000000000 --- a/packaging/RHEL4-CTDB/samba.spec +++ /dev/null @@ -1,556 +0,0 @@ -%define initdir %{_sysconfdir}/rc.d/init.d -%define auth %(test -f /etc/pam.d/system-auth && echo /etc/pam.d/system-auth || echo) - -Summary: Samba SMB client and server -Vendor: Samba Team -Packager: Samba Team -Name: samba -Version: 3.2.0 -Release: ctdb.test.090508 -Epoch: 0 -License: GNU GPL version 2 -Group: System Environment/Daemons -URL: http://www.samba.org/ - -Source: samba-%{version}.tar.bz2 - -# Don't depend on Net::LDAP -Source998: filter-requires-samba.sh -Source999: setup.tar.bz2 - -Prereq: /sbin/chkconfig /bin/mktemp /usr/bin/killall -Prereq: fileutils sed /etc/init.d - -Requires: pam >= 0.64 %{auth} -Requires: samba-common = %{version}-%{release} -Requires: logrotate >= 3.4 initscripts >= 5.54-1 -Provides: samba = %{version} - -Prefix: /usr -BuildRoot: %{_tmppath}/%{name}-%{version}-root -BuildRequires: pam-devel, readline-devel, fileutils, libacl-devel, openldap-devel, krb5-devel, cups-devel, ctdb - -# Working around perl dependency problem from docs -%define __perl_requires %{SOURCE998} - -# rpm screws up the arch lib dir when using --target on RHEL5 -%ifarch i386 i486 i586 i686 ppc s390 -%define _libarch lib -%else -%define _libarch %_lib -%endif - - -%description -Samba is the protocol by which a lot of PC-related machines share -files, printers, and other information (such as lists of available -files and printers). The Windows NT, OS/2, and Linux operating systems -support this natively, and add-on packages can enable the same thing -for DOS, Windows, VMS, UNIX of all kinds, MVS, and more. This package -provides an SMB server that can be used to provide network services to -SMB (sometimes called "Lan Manager") clients. Samba uses NetBIOS over -TCP/IP (NetBT) protocols and does NOT need the NetBEUI (Microsoft Raw -NetBIOS frame) protocol. - - -###################################################################### -%package client -Summary: Samba (SMB) client programs. -Group: Applications/System -Requires: samba-common = %{version}-%{release} -Obsoletes: smbfs -Provides: samba-client = %{version}-%{release} - -%description client -The samba-client package provides some SMB clients to compliment the -built-in SMB filesystem in Linux. These clients allow access of SMB -shares and printing to SMB printers. - - -####################################################################### -%package common -Summary: Files used by both Samba servers and clients. -Group: Applications/System -Provides: samba-common = %{version}-%{release} - -%description common -Samba-common provides files necessary for both the server and client -packages of Samba. - - -####################################################################### -%package swat -Summary: The Samba SMB server configuration program. -Group: Applications/System -Requires: samba = %{version} xinetd -Provides: samba-swat = %{version}-%{release} - -%description swat -The samba-swat package includes the new SWAT (Samba Web Administration -Tool), for remotely managing Samba's smb.conf file using your favorite -Web browser. - -%ifarch i386 i486 i586 i686 ppc s390 -%package winbind-32bit -Summary: Samba winbind compatibility package for 32bit apps on 64bit archs -Group: Applications/System - -%description winbind-32bit -Compatibility package for 32 bit apps on 64 bit architecures -%endif - - -####################################################################### -%package doc -Summary: Samba Documentation -Group: Documentation/Other -Provides: samba-doc = %{version}-%{release} -Prereq: /usr/bin/find /bin/rm /usr/bin/xargs - -%description doc -The samba-doc package includes the HTML versions of the Samba manpages -utilized by SWAT as well as the HTML and PDF version of "Using Samba", -"Samba By Example", and "The Official Samba HOWTO and Reference Guide". - - -####################################################################### - -%prep -%setup -q - -# setup the vendor files (init scripts, etc...) -%setup -T -D -a 999 -n samba-%{version} -q - -%build - -/bin/cp setup/filter-requires-samba.sh %{SOURCE998} - -cd source -# RPM_OPT_FLAGS="$RPM_OPT_FLAGS -D_FILE_OFFSET_BITS=64" - -## check for ccache -# ccache -h 2>&1 > /dev/null -#if [ $? -eq 0 ]; then -# CC="ccache gcc" -#else - CC="gcc" -#fi - -## always run autogen.sh -./autogen.sh - -CFLAGS="$RPM_OPT_FLAGS $EXTRA -D_GNU_SOURCE" ./configure \ - --prefix=%{_prefix} \ - --localstatedir=/var \ - --with-configdir=%{_sysconfdir}/samba \ - --with-libdir=%{_libdir}/samba \ - --with-lockdir=/var/lib/samba \ - --with-logfilebase=/var/log/samba \ - --with-mandir=%{_mandir} \ - --with-piddir=/var/run \ - --with-privatedir=%{_sysconfdir}/samba \ - --with-sambabook=%{_datadir}/swat/using_samba \ - --with-swatdir=%{_datadir}/swat \ - --enable-cups \ - --with-acl-support \ - --with-ads \ - --with-automount \ - --with-fhs \ - --with-pam_smbpass \ - --with-libsmbclient \ - --with-libsmbsharemodes \ - --without-smbwrapper \ - --with-pam \ - --with-quotas \ - --with-shared-modules=idmap_rid,idmap_ad,idmap_tdb2 \ - --with-syslog \ - --with-utmp \ - --with-cluster-support \ - --with-ctdb=/usr/include \ - --without-ldb \ - --with-dnsupdate \ - --with-aio-support - -make showlayout - -make CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE" proto - -## check for gcc 3.4 or later -CC_VERSION=`${CC} --version | head -1 | awk '{print $3}'` -CC_MAJOR=`echo ${CC_VERSION} | cut -d. -f 1` -CC_MINOR=`echo ${CC_VERSION} | cut -d. -f 2` -if [ ${CC_MAJOR} -ge 3 ]; then - if [ ${CC_MAJOR} -gt 3 -o ${CC_MINOR} -ge 4 ]; then - make pch - fi -fi - - -make CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE" %{?_smp_mflags} \ - all modules pam_smbpass - -## build the cifs fs mount helper -cd client -gcc -o mount.cifs $RPM_OPT_FLAGS -D_GNU_SOURCE -Wall -D_GNU_SOURCE -D_LARGEFILE64_SOURCE mount.cifs.c -gcc -o umount.cifs $RPM_OPT_FLAGS -D_GNU_SOURCE -Wall -D_GNU_SOURCE -D_LARGEFILE64_SOURCE umount.cifs.c -cd .. - -# Remove some permission bits to avoid to many dependencies -cd .. -find examples docs -type f | xargs -r chmod -x - -%install -# Clean up in case there is trash left from a previous build -rm -rf $RPM_BUILD_ROOT - -# Create the target build directory hierarchy -mkdir -p $RPM_BUILD_ROOT%{_datadir}/swat/{help,include,using_samba/{figs,gifsa}} -mkdir -p $RPM_BUILD_ROOT%{_includedir} -mkdir -p $RPM_BUILD_ROOT%{_initrddir} -mkdir -p $RPM_BUILD_ROOT{%{_libdir},%{_includedir}} -mkdir -p $RPM_BUILD_ROOT%{_libdir}/samba/{auth,charset,idmap,vfs,pdb} -mkdir -p $RPM_BUILD_ROOT/%{_libarch}/security -mkdir -p $RPM_BUILD_ROOT%{_mandir} -mkdir -p $RPM_BUILD_ROOT%{_prefix}/{bin,sbin} -mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib -mkdir -p $RPM_BUILD_ROOT/sbin -mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/{logrotate.d,pam.d,samba} -mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/{pam.d,logrotate.d} -mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/rc.d/init.d -mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/{samba,sysconfig} -mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/xinetd.d -mkdir -p $RPM_BUILD_ROOT/var/lib/samba/winbindd_privileged -mkdir -p $RPM_BUILD_ROOT/var/{log,run/winbindd,spool}/samba - -cd source -make DESTDIR=$RPM_BUILD_ROOT \ - install -cd .. - -# pam_smbpass -cp source/bin/pam_smbpass.so $RPM_BUILD_ROOT/%{_libarch}/security/pam_smbpass.so - -# NSS & PAM winbind support -install -m 755 source/bin/pam_winbind.so $RPM_BUILD_ROOT/%{_libarch}/security/pam_winbind.so -install -m 755 source/nsswitch/libnss_winbind.so $RPM_BUILD_ROOT/%{_libarch}/libnss_winbind.so -install -m 755 source/nsswitch/libnss_wins.so $RPM_BUILD_ROOT/%{_libarch}/libnss_wins.so -( cd $RPM_BUILD_ROOT/%{_libarch}; - ln -sf libnss_winbind.so libnss_winbind.so.2; - ln -sf libnss_wins.so libnss_wins.so.2 ) - -# make install puts libsmbclient.so in the wrong place on x86_64 -rm -f $RPM_BUILD_ROOT/usr/lib*/samba/libsmbclient.so $RPM_BUILD_ROOT/usr/lib*/samba/libsmbclient.a || true -install -m 755 source/bin/libsmbclient.so $RPM_BUILD_ROOT%{_libdir}/libsmbclient.so -install -m 755 source/bin/libsmbclient.a $RPM_BUILD_ROOT%{_libdir}/libsmbclient.a -install -m 644 source/include/libsmbclient.h $RPM_BUILD_ROOT%{_includedir} -ln -s %{_libdir}/libsmbclient.so $RPM_BUILD_ROOT%{_libdir}/libsmbclient.so.0 - -# make install puts libmsrpc.so in the wrong place on x86_64 -#rm -f $RPM_BUILD_ROOT/usr/lib*/samba/libmsrpc.so $RPM_BUILD_ROOT/usr/lib*/samba/libmsrpc.a || true -#install -m 755 source/bin/libmsrpc.so $RPM_BUILD_ROOT%{_libdir}/libmsrpc.so -#install -m 755 source/bin/libmsrpc.a $RPM_BUILD_ROOT%{_libdir}/libmsrpc.a -#install -m 644 source/include/libmsrpc.h $RPM_BUILD_ROOT%{_includedir} -#rm -f $RPM_BUILD_ROOT%{_libdir}/samba/libmsrpc.* -#ln -s /%{_libdir}/libmsrpc.so $RPM_BUILD_ROOT%{_libdir}/libmsrpc.so.0 - -# make install puts libsmbsharemodes.so in the wrong place on x86_64 -rm -f $RPM_BUILD_ROOT/usr/lib*/samba/libsmbsharemodes.so $RPM_BUILD_ROOT/usr/lib*/samba/libsmbsharemodes.a || true -install -m 755 source/bin/libsmbsharemodes.so $RPM_BUILD_ROOT%{_libdir}/libsmbsharemodes.so -install -m 755 source/bin/libsmbsharemodes.a $RPM_BUILD_ROOT%{_libdir}/libsmbsharemodes.a -install -m 644 source/include/smb_share_modes.h $RPM_BUILD_ROOT%{_includedir} -rm -f $RPM_BUILD_ROOT%{_libdir}/samba/libsmbsharemodes.* -ln -s /%{_libdir}/libsmbsharemodes.so $RPM_BUILD_ROOT%{_libdir}/libsmbsharemodes.so.0 - -# Install pam_smbpass.so -install -m755 source/bin/pam_smbpass.so $RPM_BUILD_ROOT/%{_libarch}/security/pam_smbpass.so - -# -ln -s %{_libdir}/samba/libwbclient.so $RPM_BUILD_ROOT/%{_libdir}/libwbclient.so.0 -ln -s %{_libdir}/samba/libtalloc.so $RPM_BUILD_ROOT/%{_libdir}/libtalloc.so.1 -ln -s %{_libdir}/samba/libtdb.so $RPM_BUILD_ROOT/%{_libdir}/libtdb.so.0 -ln -s %{_libdir}/samba/libnetapi.so $RPM_BUILD_ROOT/%{_libdir}/libnetapi.so.0 - -## cleanup -/bin/rm -rf $RPM_BUILD_ROOT/usr/lib*/samba/security - -# we need a symlink for mount to recognise the smb and smbfs filesystem types -#ln -sf %{_prefix}/bin/smbmount $RPM_BUILD_ROOT/sbin/mount.smbfs -#ln -sf %{_prefix}/bin/smbmount $RPM_BUILD_ROOT/sbin/mount.smb -#/bin/rm -f $RPM_BUILD_ROOT/mount.smbfs - -# Install the miscellany -echo 127.0.0.1 localhost > $RPM_BUILD_ROOT%{_sysconfdir}/samba/lmhosts - -install -m644 setup/samba.log $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/samba -install -m644 setup/swat $RPM_BUILD_ROOT%{_sysconfdir}/xinetd.d/swat -install -m644 setup/samba.sysconfig $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/samba -install -m755 setup/smb.init $RPM_BUILD_ROOT%{initdir}/smb -install -m755 setup/winbind.init $RPM_BUILD_ROOT%{initdir}/winbind -install -m644 setup/samba.pamd $RPM_BUILD_ROOT%{_sysconfdir}/pam.d/samba -install -m755 setup/smbprint $RPM_BUILD_ROOT%{_bindir} -install -m644 setup/smbusers $RPM_BUILD_ROOT%{_sysconfdir}/samba/smbusers -install -m644 setup/smb.conf $RPM_BUILD_ROOT%{_sysconfdir}/samba/smb.conf -install -m755 source/client/mount.cifs $RPM_BUILD_ROOT/sbin/mount.cifs -install -m755 source/client/umount.cifs $RPM_BUILD_ROOT/sbin/umount.cifs -install -m755 source/script/mksmbpasswd.sh $RPM_BUILD_ROOT%{_bindir} - -/bin/rm $RPM_BUILD_ROOT%{_sbindir}/*mount.cifs - -ln -s ../..%{initdir}/smb $RPM_BUILD_ROOT%{_sbindir}/samba -ln -s ../..%{initdir}/winbind $RPM_BUILD_ROOT%{_sbindir}/winbind - -# Remove "*.old" files -find $RPM_BUILD_ROOT -name "*.old" -exec rm -f {} \; - -## don't duplicate the docs. These are installed by/with SWAT -rm -rf docs/htmldocs -rm -rf docs/manpages -( cd docs; ln -s %{_prefix}/share/swat/help htmldocs ) - -## -## Clean out man pages for tools not installed here -## -rm -f $RPM_BUILD_ROOT%{_mandir}/man1/log2pcap.1* -rm -f $RPM_BUILD_ROOT%{_mandir}/man1/smbsh.1* -rm -f $RPM_BUILD_ROOT%{_mandir}/man5/vfstest.1* - - -%clean -rm -rf $RPM_BUILD_ROOT - -%post -## deal with an upgrade from a broken 3.0.21b RPM -if [ "$1" -eq "2" ]; then - if [ -d /var/cache/samba ]; then - for file in `ls /var/cache/samba/*tdb`; do - /bin/cp -up $file /var/lib/samba/`basename $file` - done - mkdir -p /var/lib/samba/eventlog - for file in `ls /var/cache/samba/eventlog/*tdb`; do - /bin/cp -up $file /var/lib/samba/eventlog/`basename $file` - done - /bin/mv /var/cache/samba /var/cache/samba.moved - fi -fi - -%preun -if [ $1 = 0 ] ; then - /sbin/chkconfig --del smb - /sbin/chkconfig --del winbind - # rm -rf /var/log/samba/* /var/lib/samba/* - /sbin/service smb stop >/dev/null 2>&1 -fi -exit 0 - -%postun -if [ "$1" -ge "1" ]; then - %{initdir}/smb restart >/dev/null 2>&1 -fi - - -%post swat -# Add swat entry to /etc/services if not already there. -if [ ! "`grep ^\s**swat /etc/services`" ]; then - echo 'swat 901/tcp # Add swat service used via inetd' >> /etc/services -fi - -%post common -/sbin/ldconfig - -%postun common -/sbin/ldconfig - -####################################################################### -## Files section ## -####################################################################### - -%files -%defattr(-,root,root) - -%config(noreplace) %{_sysconfdir}/sysconfig/samba -%config(noreplace) %{_sysconfdir}/samba/smbusers -%attr(755,root,root) %config %{initdir}/smb -%attr(755,root,root) %config %{initdir}/winbind -%config(noreplace) %{_sysconfdir}/logrotate.d/samba -%config(noreplace) %{_sysconfdir}/pam.d/samba - -%attr(0755,root,root) %dir /var/log/samba -%attr(0755,root,root) %dir /var/lib/samba -%attr(1777,root,root) %dir /var/spool/samba - -%{_sbindir}/samba -%{_sbindir}/winbind - -%{_sbindir}/smbd -%{_sbindir}/nmbd - -%{_bindir}/mksmbpasswd.sh -%{_bindir}/smbcontrol -%{_bindir}/smbstatus -%{_bindir}/tdbbackup -%{_bindir}/tdbtool -%{_bindir}/tdbdump -%{_bindir}/eventlogadm - -%{_libdir}/samba/idmap/*.so -%{_libdir}/samba/nss_info/*.so -%{_libdir}/samba/vfs/*.so -%{_libdir}/samba/auth/*.so - -%{_mandir}/man1/smbcontrol.1* -%{_mandir}/man1/smbstatus.1* -%{_mandir}/man1/vfstest.1* -%{_mandir}/man5/smbpasswd.5* -%{_mandir}/man7/samba.7* -%{_mandir}/man8/nmbd.8* -%{_mandir}/man8/pdbedit.8* -%{_mandir}/man8/smbd.8* -%{_mandir}/man8/tdbbackup.8* -%{_mandir}/man8/tdbdump.8* -%{_mandir}/man8/tdbtool.8* -%{_mandir}/man8/eventlogadm.8* -%{_mandir}/man8/vfs_*.8* -%{_mandir}/man8/idmap_*.8* - - -########## - -%files doc -%defattr(-,root,root) -%doc README COPYING Manifest -%doc WHATSNEW.txt Roadmap -%doc docs -%doc examples/autofs examples/LDAP examples/libsmbclient examples/misc examples/printer-accounting -%doc examples/printing - -########## - -%files swat -%defattr(-,root,root) -%config(noreplace) %{_sysconfdir}/xinetd.d/swat -%dir %{_datadir}/swat -%{_datadir}/swat/* -%{_sbindir}/swat -%{_mandir}/man8/swat.8* -%attr(755,root,root) %{_libdir}/samba/*.msg - -########## - -%files client -%defattr(-,root,root) -#/sbin/mount.smb -#/sbin/mount.smbfs -/sbin/mount.cifs -/sbin/umount.cifs - -%{_bindir}/rpcclient -%{_bindir}/smbcacls -#%{_bindir}/smbmount -#%{_bindir}/smbmnt -#%{_bindir}/smbumount -%{_bindir}/findsmb -%{_bindir}/nmblookup -%{_bindir}/smbget -%{_bindir}/smbclient -%{_bindir}/smbprint -%{_bindir}/smbspool -%{_bindir}/smbtar -%{_bindir}/smbtree - -#%{_mandir}/man8/smbmnt.8* -#%{_mandir}/man8/smbmount.8* -#%{_mandir}/man8/smbumount.8* -%{_mandir}/man8/mount.cifs.8.* -%{_mandir}/man8/umount.cifs.8.* -%{_mandir}/man8/smbspool.8* -%{_mandir}/man1/smbget.1* -%{_mandir}/man5/smbgetrc.5* -%{_mandir}/man1/findsmb.1* -%{_mandir}/man1/nmblookup.1* -%{_mandir}/man1/rpcclient.1* -%{_mandir}/man1/smbcacls.1* -%{_mandir}/man1/smbclient.1* -%{_mandir}/man1/smbtar.1* -%{_mandir}/man1/smbtree.1* - -########## - -%files common -%defattr(-,root,root) -%dir %{_sysconfdir}/samba -%dir %{_libdir}/samba -%dir %{_libdir}/samba/charset -%config(noreplace) %{_sysconfdir}/samba/smb.conf -%config(noreplace) %{_sysconfdir}/samba/lmhosts -%{_initrddir}/winbind - -%attr(755,root,root) /%{_libarch}/libnss_wins.so* -%attr(755,root,root) /%{_libarch}/libnss_winbind.so* -%attr(755,root,root) /%{_libarch}/security/pam_winbind.so -%attr(755,root,root) /%{_libarch}/security/pam_smbpass.so - -%{_includedir}/libsmbclient.h -%{_libdir}/libsmbclient.* -#%{_includedir}/libmsrpc.h -#%{_libdir}/libmsrpc.* -%{_includedir}/smb_share_modes.h -%{_libdir}/libsmbsharemodes.* - -%{_libdir}/samba/*.dat -%{_libdir}/samba/charset/*.so - -%{_includedir}/netapi.h -%{_includedir}/wbclient.h -%{_includedir}/talloc.h -%{_includedir}/tdb.h -%{_libdir}/samba/libnetapi.so* -%{_libdir}/libnetapi.so* -%{_libdir}/samba/libtalloc.so* -%{_libdir}/libtalloc.so* -%{_libdir}/samba/libtdb.so* -%{_libdir}/libtdb.so* -%{_libdir}/samba/libwbclient.so* -%{_libdir}/libwbclient.so* - -%{_sbindir}/winbindd -%{_bindir}/testparm -%{_bindir}/smbpasswd -%{_bindir}/profiles -%{_bindir}/net -%{_bindir}/ldbadd -%{_bindir}/ldbdel -%{_bindir}/ldbedit -%{_bindir}/ldbmodify -%{_bindir}/ldbsearch -%{_bindir}/wbinfo -%{_bindir}/ntlm_auth -%{_bindir}/pdbedit -%{_bindir}/smbcquotas - -%{_mandir}/man1/ntlm_auth.1* -%{_mandir}/man1/profiles.1* -%{_mandir}/man1/smbcquotas.1* -%{_mandir}/man1/testparm.1* -%{_mandir}/man5/smb.conf.5* -%{_mandir}/man5/lmhosts.5* -%{_mandir}/man8/smbpasswd.8* -%{_mandir}/man1/wbinfo.1* -%{_mandir}/man8/winbindd.8* -%{_mandir}/man8/net.8* -%{_mandir}/man7/pam_winbind.7* -%{_mandir}/man7/libsmbclient.7* - -%ifarch i386 i486 i586 i686 ppc s390 -%files winbind-32bit -%attr(755,root,root) /%{_libarch}/libnss_winbind.so* -%attr(755,root,root) /%{_libarch}/libnss_wins.so* -%attr(755,root,root) /%{_libarch}/security/pam_winbind.so -%endif - - -%changelog -* Fri Jan 16 2004 Gerald (Jerry) Carter -- Removed ChangeLog entries since they are kept in CVS - - - diff --git a/packaging/RHEL4-CTDB/setup/filter-requires-samba.sh b/packaging/RHEL4-CTDB/setup/filter-requires-samba.sh deleted file mode 100755 index f90085ce35..0000000000 --- a/packaging/RHEL4-CTDB/setup/filter-requires-samba.sh +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/sh - -/usr/lib/rpm/perl.req $* | grep -E -v '(Net::LDAP|Crypt::SmbHash|CGI|Unicode::MapUTF8)' - diff --git a/packaging/RHEL4-CTDB/setup/samba.log b/packaging/RHEL4-CTDB/setup/samba.log deleted file mode 100644 index a3c000ea78..0000000000 --- a/packaging/RHEL4-CTDB/setup/samba.log +++ /dev/null @@ -1,9 +0,0 @@ -/var/log/samba/*.log /var/log/samba/log.smbd /var/log/samba/log.nmbd { - notifempty - missingok - sharedscripts - copytruncate - postrotate - /bin/kill -HUP `cat /var/run/smbd.pid /var/run/nmbd.pid /var/run/winbindd.pid 2> /dev/null` 2> /dev/null || true - endscript -} diff --git a/packaging/RHEL4-CTDB/setup/samba.pamd b/packaging/RHEL4-CTDB/setup/samba.pamd deleted file mode 100644 index 8c529da3a1..0000000000 --- a/packaging/RHEL4-CTDB/setup/samba.pamd +++ /dev/null @@ -1,4 +0,0 @@ -auth required pam_stack.so service=system-auth -session required pam_stack.so service=system-auth -account required pam_stack.so service=system-auth -password required pam_stack.so service=system-auth diff --git a/packaging/RHEL4-CTDB/setup/samba.sysconfig b/packaging/RHEL4-CTDB/setup/samba.sysconfig deleted file mode 100644 index 944b72fcc2..0000000000 --- a/packaging/RHEL4-CTDB/setup/samba.sysconfig +++ /dev/null @@ -1,6 +0,0 @@ -# Options to smbd -SMBDOPTIONS="-D" -# Options to nmbd -NMBDOPTIONS="-D" -# Options for winbindd -WINBINDOPTIONS="" diff --git a/packaging/RHEL4-CTDB/setup/smb.conf b/packaging/RHEL4-CTDB/setup/smb.conf deleted file mode 100644 index 971ca19c83..0000000000 --- a/packaging/RHEL4-CTDB/setup/smb.conf +++ /dev/null @@ -1,271 +0,0 @@ -# This is the main Samba configuration file. You should read the -# smb.conf(5) manual page in order to understand the options listed -# here. Samba has a huge number of configurable options (perhaps too -# many!) most of which are not shown in this example -# -# For a step to step guide on installing, configuring and using samba, -# read the Samba-HOWTO-Collection. This may be obtained from: -# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf -# -# Many working examples of smb.conf files can be found in the -# Samba-Guide which is generated daily and can be downloaded from: -# http://www.samba.org/samba/docs/Samba-Guide.pdf -# -# Any line which starts with a ; (semi-colon) or a # (hash) -# is a comment and is ignored. In this example we will use a # -# for commentry and a ; for parts of the config file that you -# may wish to enable -# -# NOTE: Whenever you modify this file you should run the command "testparm" -# to check that you have not made any basic syntactic errors. -# -#======================= Global Settings ===================================== -[global] - -# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH - workgroup = MYGROUP - -# server string is the equivalent of the NT Description field - server string = Samba Server - -# Security mode. Defines in which mode Samba will operate. Possible -# values are share, user, server, domain and ads. Most people will want -# user level security. See the Samba-HOWTO-Collection for details. - security = user - -# This option is important for security. It allows you to restrict -# connections to machines which are on your local network. The -# following example restricts access to two C class networks and -# the "loopback" interface. For more examples of the syntax see -# the smb.conf man page -; hosts allow = 192.168.1. 192.168.2. 127. - -# If you want to automatically load your printer list rather -# than setting them up individually then you'll need this - load printers = yes - -# you may wish to override the location of the printcap file -; printcap name = /etc/printcap - -# on SystemV system setting printcap name to lpstat should allow -# you to automatically obtain a printer list from the SystemV spool -# system -; printcap name = lpstat - -# It should not be necessary to specify the print system type unless -# it is non-standard. Currently supported print systems include: -# bsd, cups, sysv, plp, lprng, aix, hpux, qnx -; printing = cups - -# Uncomment this if you want a guest account, you must add this to /etc/passwd -# otherwise the user "nobody" is used -; guest account = pcguest - -# this tells Samba to use a separate log file for each machine -# that connects - log file = /usr/local/samba/var/log.%m - -# Put a capping on the size of the log files (in Kb). - max log size = 50 - -# Use password server option only with security = server -# The argument list may include: -# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] -# or to auto-locate the domain controller/s -# password server = * -; password server = - -# Use the realm option only with security = ads -# Specifies the Active Directory realm the host is part of -; realm = MY_REALM - -# Backend to store user information in. New installations should -# use either tdbsam or ldapsam. smbpasswd is available for backwards -# compatibility. tdbsam requires no further configuration. -; passdb backend = tdbsam - -# Using the following line enables you to customise your configuration -# on a per machine basis. The %m gets replaced with the netbios name -# of the machine that is connecting. -# Note: Consider carefully the location in the configuration file of -# this line. The included file is read at that point. -; include = /usr/local/samba/lib/smb.conf.%m - -# Configure Samba to use multiple interfaces -# If you have multiple network interfaces then you must list them -# here. See the man page for details. -; interfaces = 192.168.12.2/24 192.168.13.2/24 - -# Browser Control Options: -# set local master to no if you don't want Samba to become a master -# browser on your network. Otherwise the normal election rules apply -; local master = no - -# OS Level determines the precedence of this server in master browser -# elections. The default value should be reasonable -; os level = 33 - -# Domain Master specifies Samba to be the Domain Master Browser. This -# allows Samba to collate browse lists between subnets. Don't use this -# if you already have a Windows NT domain controller doing this job -; domain master = yes - -# Preferred Master causes Samba to force a local browser election on startup -# and gives it a slightly higher chance of winning the election -; preferred master = yes - -# Enable this if you want Samba to be a domain logon server for -# Windows95 workstations. -; domain logons = yes - -# if you enable domain logons then you may want a per-machine or -# per user logon script -# run a specific logon batch file per workstation (machine) -; logon script = %m.bat -# run a specific logon batch file per username -; logon script = %U.bat - -# Where to store roving profiles (only for Win95 and WinNT) -# %L substitutes for this servers netbios name, %U is username -# You must uncomment the [Profiles] share below -; logon path = \\%L\Profiles\%U - -# Windows Internet Name Serving Support Section: -# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server -; wins support = yes - -# WINS Server - Tells the NMBD components of Samba to be a WINS Client -# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both -; wins server = w.x.y.z - -# WINS Proxy - Tells Samba to answer name resolution queries on -# behalf of a non WINS capable client, for this to work there must be -# at least one WINS Server on the network. The default is NO. -; wins proxy = yes - -# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names -# via DNS nslookups. The default is NO. - dns proxy = no - -# These scripts are used on a domain controller or stand-alone -# machine to add or delete corresponding unix accounts -; add user script = /usr/sbin/useradd %u -; add group script = /usr/sbin/groupadd %g -; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u -; delete user script = /usr/sbin/userdel %u -; delete user from group script = /usr/sbin/deluser %u %g -; delete group script = /usr/sbin/groupdel %g - - -#============================ Share Definitions ============================== -[homes] - comment = Home Directories - browseable = no - writable = yes - -# Un-comment the following and create the netlogon directory for Domain Logons -; [netlogon] -; comment = Network Logon Service -; path = /usr/local/samba/lib/netlogon -; guest ok = yes -; writable = no -; share modes = no - - -# Un-comment the following to provide a specific roving profile share -# the default is to use the user's home directory -;[Profiles] -; path = /usr/local/samba/profiles -; browseable = no -; guest ok = yes - - -# NOTE: If you have a BSD-style print system there is no need to -# specifically define each individual printer -[printers] - comment = All Printers - path = /usr/spool/samba - browseable = no -# Set public = yes to allow user 'guest account' to print - guest ok = no - writable = no - printable = yes - -# This one is useful for people to share files -;[tmp] -; comment = Temporary file space -; path = /tmp -; read only = no -; public = yes - -# A publicly accessible directory, but read only, except for people in -# the "staff" group -;[public] -; comment = Public Stuff -; path = /home/samba -; public = yes -; writable = yes -; printable = no -; write list = @staff - -# Other examples. -# -# A private printer, usable only by fred. Spool data will be placed in fred's -# home directory. Note that fred must have write access to the spool directory, -# wherever it is. -;[fredsprn] -; comment = Fred's Printer -; valid users = fred -; path = /homes/fred -; printer = freds_printer -; public = no -; writable = no -; printable = yes - -# A private directory, usable only by fred. Note that fred requires write -# access to the directory. -;[fredsdir] -; comment = Fred's Service -; path = /usr/somewhere/private -; valid users = fred -; public = no -; writable = yes -; printable = no - -# a service which has a different directory for each machine that connects -# this allows you to tailor configurations to incoming machines. You could -# also use the %U option to tailor it by user name. -# The %m gets replaced with the machine name that is connecting. -;[pchome] -; comment = PC Directories -; path = /usr/pc/%m -; public = no -; writable = yes - -# A publicly accessible directory, read/write to all users. Note that all files -# created in the directory by users will be owned by the default user, so -# any user with access can delete any other user's files. Obviously this -# directory must be writable by the default user. Another user could of course -# be specified, in which case all files would be owned by that user instead. -;[public] -; path = /usr/somewhere/else/public -; public = yes -; only guest = yes -; writable = yes -; printable = no - -# The following two entries demonstrate how to share a directory so that two -# users can place files there that will be owned by the specific users. In this -# setup, the directory should be writable by both users and should have the -# sticky bit set on it to prevent abuse. Obviously this could be extended to -# as many users as required. -;[myshare] -; comment = Mary's and Fred's stuff -; path = /usr/somewhere/shared -; valid users = mary fred -; public = no -; writable = yes -; printable = no -; create mask = 0765 - - diff --git a/packaging/RHEL4-CTDB/setup/smb.init b/packaging/RHEL4-CTDB/setup/smb.init deleted file mode 100644 index af85b2c079..0000000000 --- a/packaging/RHEL4-CTDB/setup/smb.init +++ /dev/null @@ -1,135 +0,0 @@ -#!/bin/sh -# -# chkconfig: - 91 35 -# description: Starts and stops the Samba smbd and nmbd daemons \ -# used to provide SMB network services. -# -# pidfile: /var/run/samba/smbd.pid -# pidfile: /var/run/samba/nmbd.pid -# config: /etc/samba/smb.conf - - -# Source function library. -if [ -f /etc/init.d/functions ] ; then - . /etc/init.d/functions -elif [ -f /etc/rc.d/init.d/functions ] ; then - . /etc/rc.d/init.d/functions -else - exit 0 -fi - -# Avoid using root's TMPDIR -unset TMPDIR - -# Source networking configuration. -. /etc/sysconfig/network - -if [ -f /etc/sysconfig/samba ]; then - . /etc/sysconfig/samba -fi - -# Check that networking is up. -[ ${NETWORKING} = "no" ] && exit 0 - -# Check that smb.conf exists. -[ -f /etc/samba/smb.conf ] || exit 0 - -# Check that we can write to it... so non-root users stop here -[ -w /etc/samba/smb.conf ] || exit 0 - -# Check whether "netbios disabled" is true -ISNETBIOSDISABLED=$(testparm -s 2>/dev/null | \ - sed -n '/\[global\]/,/^$/p' | \ - grep "disable netbios = Yes" | \ - awk 'BEGIN{FS=" = "}{print $2}') - - -RETVAL=0 - - -start() { - KIND="SMB" - echo -n $"Starting $KIND services: " - daemon smbd $SMBDOPTIONS - RETVAL=$? - echo - KIND="NMB" - if [ x"$ISNETBIOSDISABLED" != x"Yes" ]; then - echo -n $"Starting $KIND services: " - daemon nmbd $NMBDOPTIONS - RETVAL2=$? - echo - [ $RETVAL -eq 0 -a $RETVAL2 -eq 0 ] && touch /var/lock/subsys/smb || \ - RETVAL=1 - else - [ $RETVAL -eq 0 ] && touch /var/lock/subsys/smb || \ - RETVAL=1 - fi - return $RETVAL -} - -stop() { - KIND="SMB" - echo -n $"Shutting down $KIND services: " - killproc smbd - RETVAL=$? - [ $RETVAL -eq 0 ] && rm -f /var/run/smbd.pid - echo - KIND="NMB" - if [ x"$ISNETBIOSDISABLED" != x"Yes" ]; then - echo -n $"Shutting down $KIND services: " - killproc nmbd - RETVAL2=$? - [ $RETVAL2 -eq 0 ] && rm -f /var/run/nmbd.pid - [ $RETVAL -eq 0 -a $RETVAL2 -eq 0 ] && rm -f /var/lock/subsys/smb - echo "" - else - [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/smb - echo "" - fi - return $RETVAL -} - -restart() { - stop - start -} - -reload() { - echo -n $"Reloading smb.conf file: " - killproc smbd -HUP - RETVAL=$? - echo - return $RETVAL -} - -rhstatus() { - status smbd - status nmbd -} - -case "$1" in - start) - start - ;; - stop) - stop - ;; - restart) - restart - ;; - reload) - reload - ;; - status) - rhstatus - ;; - condrestart) - [ -f /var/lock/subsys/smb ] && restart || : - ;; - *) - echo $"Usage: $0 {start|stop|restart|reload|status|condrestart}" - exit 1 -esac - -exit $? diff --git a/packaging/RHEL4-CTDB/setup/smbprint b/packaging/RHEL4-CTDB/setup/smbprint deleted file mode 100644 index 1c3959d49b..0000000000 --- a/packaging/RHEL4-CTDB/setup/smbprint +++ /dev/null @@ -1,84 +0,0 @@ -#!/bin/sh -# This script is an input filter for printcap printing on a unix machine. It -# uses the smbclient program to print the file to the specified smb-based -# server and service. -# For example you could have a printcap entry like this -# -# smb:lp=/dev/null:sd=/usr/spool/smb:sh:if=/usr/local/samba/smbprint -# -# which would create a unix printer called "smb" that will print via this -# script. You will need to create the spool directory /usr/spool/smb with -# appropriate permissions and ownerships for your system. - -# Set these to the server and service you wish to print to -# In this example I have a WfWg PC called "lapland" that has a printer -# exported called "printer" with no password. - -# -# Script further altered by hamiltom@ecnz.co.nz (Michael Hamilton) -# so that the server, service, and password can be read from -# a /usr/var/spool/lpd/PRINTNAME/.config file. -# -# In order for this to work the /etc/printcap entry must include an -# accounting file (af=...): -# -# cdcolour:\ -# :cm=CD IBM Colorjet on 6th:\ -# :sd=/var/spool/lpd/cdcolour:\ -# :af=/var/spool/lpd/cdcolour/acct:\ -# :if=/usr/local/etc/smbprint:\ -# :mx=0:\ -# :lp=/dev/null: -# -# The /usr/var/spool/lpd/PRINTNAME/.config file should contain: -# share=PC_SERVER -# user="user" -# password="password" -# -# Please, do not modify the order in the file. -# Example: -# share=\\server\deskjet -# user="fred" -# password="" - -# -# The last parameter to the filter is the accounting file name. -# Extract the directory name from the file name. -# Concat this with /.config to get the config file. -# -eval acct_file=\${$#} -spool_dir=`dirname $acct_file` -config_file=$spool_dir/.config - -# Should read the following variables set in the config file: -# share -# hostip -# user -# password - -eval `cat $config_file` - -share=`echo $share | sed "s/[\]/\//g"` - -if [ "$user" != "" ]; then - usercmd="-U" -else - usercmd="" -fi - -if [ "$workgroup" != "" ]; then - workgroupcmd="-W" -else - workgroupcmd="" -fi - -if [ "$translate" = "yes" ]; then - command="translate ; print -" -else - command="print -" -fi -#echo $share $password $translate $x_command > /tmp/smbprint.log - -cat | /usr/bin/smbclient "$share" "$password" -E ${hostip:+-I} \ - $hostip -N -P $usercmd "$user" $workgroupcmd "$workgroup" \ - -c "$command" 2>/dev/null diff --git a/packaging/RHEL4-CTDB/setup/smbusers b/packaging/RHEL4-CTDB/setup/smbusers deleted file mode 100644 index ae3389f53f..0000000000 --- a/packaging/RHEL4-CTDB/setup/smbusers +++ /dev/null @@ -1,3 +0,0 @@ -# Unix_name = SMB_name1 SMB_name2 ... -root = administrator admin -nobody = guest pcguest smbguest diff --git a/packaging/RHEL4-CTDB/setup/swat b/packaging/RHEL4-CTDB/setup/swat deleted file mode 100644 index 8b62348dde..0000000000 --- a/packaging/RHEL4-CTDB/setup/swat +++ /dev/null @@ -1,15 +0,0 @@ -# default: off -# description: SWAT is the Samba Web Admin Tool. Use swat \ -# to configure your Samba server. To use SWAT, \ -# connect to port 901 with your favorite web browser. -service swat -{ - port = 901 - socket_type = stream - wait = no - only_from = 127.0.0.1 - user = root - server = /usr/sbin/swat - log_on_failure += USERID - disable = yes -} diff --git a/packaging/RHEL4-CTDB/setup/swat.desktop b/packaging/RHEL4-CTDB/setup/swat.desktop deleted file mode 100644 index 0d7b4b5c48..0000000000 --- a/packaging/RHEL4-CTDB/setup/swat.desktop +++ /dev/null @@ -1,8 +0,0 @@ -[Desktop Entry] -Name=Samba Configuration -Name[de]=Samba Konfiguration -Type=Application -Comment=Configure Samba with a web based interface -Exec=htmlview http://127.0.0.1:901/ -Terminal=false -Categories=X-Red-Hat-Extra;Application;System;X-Red-Hat-ServerConfig; diff --git a/packaging/RHEL4-CTDB/setup/winbind.init b/packaging/RHEL4-CTDB/setup/winbind.init deleted file mode 100644 index a99038f9c7..0000000000 --- a/packaging/RHEL4-CTDB/setup/winbind.init +++ /dev/null @@ -1,100 +0,0 @@ -#!/bin/sh -# -# chkconfig: - 91 35 -# description: Starts and stops the Samba winbind daemon -# # -# pidfile: /var/cache/samba/winbind.pid -# config: /etc/samba/smb.conf - - -# Source function library. -if [ -f /etc/init.d/functions ] ; then - . /etc/init.d/functions -elif [ -f /etc/rc.d/init.d/functions ] ; then - . /etc/rc.d/init.d/functions -else - exit 0 -fi - -# Avoid using root's TMPDIR -unset TMPDIR - -# Source networking configuration. -. /etc/sysconfig/network - -if [ -f /etc/sysconfig/samba ]; then - . /etc/sysconfig/samba -fi - -# Check that networking is up. -[ ${NETWORKING} = "no" ] && exit 0 - -# Check that smb.conf exists. -[ -f /etc/samba/smb.conf ] || exit 0 - -RETVAL=0 - - -start() { - KIND="Winbind" - echo -n $"Starting $KIND services: " - daemon winbindd "$WINBINDOPTIONS" - RETVAL=$? - echo - [ $RETVAL -eq 0 ] && touch /var/lock/subsys/winbindd || RETVAL=1 - return $RETVAL -} - -stop() { - echo - KIND="Winbind" - echo -n $"Shutting down $KIND services: " - killproc winbindd - RETVAL=$? - [ $RETVAL -eq 0 ] && rm -f /var/run/winbindd.pid && rm -f /var/lock/subsys/winbindd - echo "" - return $RETVAL -} - -restart() { - stop - start -} - -reload() { - echo -n $"Reloading smb.conf file: " - killproc winbindd -HUP - RETVAL=$? - echo - return $RETVAL -} - -rhstatus() { - status winbindd -} - -case "$1" in - start) - start - ;; - stop) - stop - ;; - restart) - restart - ;; - reload) - reload - ;; - status) - rhstatus - ;; - condrestart) - [ -f /var/lock/subsys/winbindd ] && restart || : - ;; - *) - echo $"Usage: $0 {start|stop|restart|reload|status|condrestart}" - exit 1 -esac - -exit $? -- cgit