High Availability

&author.jht; &author.jeremy; High Availability Features and Benefits availability intolerance vital task Network administrators are often concerned about the availability of file and print services. Network users are inclined toward intolerance of the services they depend on to perform vital task responsibilities. A sign in a computer room served to remind staff of their responsibilities. It read:

fail managed by humans economically wise anticipate failure All humans fail, in both great and small ways we fail continually. Machines fail too. Computers are machines that are managed by humans, the fallout from failure can be spectacular. Your responsibility is to deal with failure, to anticipate it and to eliminate it as far as is humanly and economically wise to achieve. Are your actions part of the problem or part of the solution?

If we are to deal with failure in a planned and productive manner, then first we must understand the problem. That is the purpose of this chapter. high availability CIFS/SMB state of knowledge Parenthetically, in the following discussion there are seeds of information on how to provision a network infrastructure against failure. Our purpose here is not to provide a lengthy dissertation on the subject of high availability. Additionally, we have made a conscious decision to not provide detailed working examples of high availability solutions; instead we present an overview of the issues in the hope that someone will rise to the challenge of providing a detailed document that is focused purely on presentation of the current state of knowledge and practice in high availability as it applies to the deployment of Samba and other CIFS/SMB technologies. Technical Discussion SambaXP conference Germany inspired structure The following summary was part of a presentation by Jeremy Allison at the SambaXP 2003 conference that was held at Goettingen, Germany, in April 2003. Material has been added from other sources, but it was Jeremy who inspired the structure that follows. The Ultimate Goal clustering technologies affordable power unstoppable services All clustering technologies aim to achieve one or more of the following: Obtain the maximum affordable computational power. Obtain faster program execution. Deliver unstoppable services. Avert points of failure. Exact most effective utilization of resources. A clustered file server ideally has the following properties: clustered file server connect transparently transparently reconnected distributed file system All clients can connect transparently to any server. A server can fail and clients are transparently reconnected to another server. All servers serve out the same set of files. All file changes are immediately seen on all servers. Requires a distributed file system. Infinite ability to scale by adding more servers or disks. Why Is This So Hard? In short, the problem is one of state. state information All TCP/IP connections are dependent on state information. TCP failover The TCP connection involves a packet sequence number. This sequence number would need to be dynamically updated on all machines in the cluster to effect seamless TCP failover. CIFS/SMB TCP CIFS/SMB (the Windows networking protocols) uses TCP connections. This means that from a basic design perspective, failover is not seriously considered. All current SMB clusters are failover solutions &smbmdash; they rely on the clients to reconnect. They provide server failover, but clients can lose information due to a server failure. server failure Servers keep state information about client connections. state CIFS/SMB involves a lot of state. Every file open must be compared with other open files to check share modes. The Front-End Challenge cluster servers single server TCP data streams front-end virtual server virtual server de-multiplex SMB To make it possible for a cluster of file servers to appear as a single server that has one name and one IP address, the incoming TCP data streams from clients must be processed by the front-end virtual server. This server must de-multiplex the incoming packets at the SMB protocol layer level and then feed the SMB packet to different servers in the cluster. IPC$ connections RPC calls One could split all IPC$ connections and RPC calls to one server to handle printing and user lookup requirements. RPC printing handles are shared between different IPC4 sessions &smbmdash; it is hard to split this across clustered servers! Conceptually speaking, all other servers would then provide only file services. This is a simpler problem to concentrate on. Demultiplexing SMB Requests SMB requests SMB state information front-end virtual server complicated problem De-multiplexing of SMB requests requires knowledge of SMB state information, all of which must be held by the front-end virtual server. This is a perplexing and complicated problem to solve. vuid tid fid Windows XP and later have changed semantics so state information (vuid, tid, fid) must match for a successful operation. This makes things simpler than before and is a positive step forward. SMB requests Terminal Server SMB requests are sent by vuid to their associated server. No code exists today to effect this solution. This problem is conceptually similar to the problem of correctly handling requests from multiple requests from Windows 2000 Terminal Server in Samba. de-multiplexing One possibility is to start by exposing the server pool to clients directly. This could eliminate the de-multiplexing step. The Distributed File System Challenge Distributed File Systems There exists many distributed file systems for UNIX and Linux. backend SMB semantics share modes locking oplock distributed file systems Many could be adopted to backend our cluster, so long as awareness of SMB semantics is kept in mind (share modes, locking, and oplock issues in particular). Common free distributed file systems include: NFS AFS OpenGFS Lustre NFS AFS OpenGFS Lustre server pool The server pool (cluster) can use any distributed file system backend if all SMB semantics are performed within this pool. Restrictive Constraints on Distributed File Systems SMB services oplock handling server pool backend file system pool Where a clustered server provides purely SMB services, oplock handling may be done within the server pool without imposing a need for this to be passed to the backend file system pool. NFS interoperability On the other hand, where the server pool also provides NFS or other file services, it will be essential that the implementation be oplock-aware so it can interoperate with SMB services. This is a significant challenge today. A failure to provide this interoperability will result in a significant loss of performance that will be sorely noted by users of Microsoft Windows clients. Last, all state information must be shared across the server pool. Server Pool Communications POSIX semantics SMB POSIX locks SMB locks Most backend file systems support POSIX file semantics. This makes it difficult to push SMB semantics back into the file system. POSIX locks have different properties and semantics from SMB locks. smbd tdb Clustered smbds All smbd processes in the server pool must of necessity communicate very quickly. For this, the current tdb file structure that Samba uses is not suitable for use across a network. Clustered smbds must use something else. Server Pool Communications Demands High-speed interserver communications in the server pool is a design prerequisite for a fully functional system. Possibilities for this include: Myrinet scalable coherent interfaceSCI Proprietary shared memory bus (example: Myrinet or SCI [scalable coherent interface]). These are high-cost items. Gigabit Ethernet (now quite affordable). Raw Ethernet framing (to bypass TCP and UDP overheads). We have yet to identify metrics for performance demands to enable this to happen effectively. Required Modifications to Samba Samba needs to be significantly modified to work with a high-speed server interconnect system to permit transparent failover clustering. Particular functions inside Samba that will be affected include: The locking database, oplock notifications, and the share mode database. failure semantics oplock messages Failure semantics need to be defined. Samba behaves the same way as Windows. When oplock messages fail, a file open request is allowed, but this is potentially dangerous in a clustered environment. So how should interserver pool failure semantics function, and how should such functionality be implemented? Should this be implemented using a point-to-point lock manager, or can this be done using multicast techniques? A Simple Solution failover servers exported file system distributed locking protocol Allowing failover servers to handle different functions within the exported file system removes the problem of requiring a distributed locking protocol. high-speed server interconnect complex file name space If only one server is active in a pair, the need for high-speed server interconnect is avoided. This allows the use of existing high-availability solutions, instead of inventing a new one. This simpler solution comes at a price &smbmdash; the cost of which is the need to manage a more complex file name space. Since there is now not a single file system, administrators must remember where all services are located &smbmdash; a complexity not easily dealt with. virtual server The virtual server is still needed to redirect requests to backend servers. Backend file space integrity is the responsibility of the administrator. High-Availability Server Products resource failover high-availability services dedicated heartbeat LAN failover process Failover servers must communicate in order to handle resource failover. This is essential for high-availability services. The use of a dedicated heartbeat is a common technique to introduce some intelligence into the failover process. This is often done over a dedicated link (LAN or serial). SCSI Red Hat Cluster Manager Microsoft Wolfpack Fiber Channel failover communication Many failover solutions (like Red Hat Cluster Manager and Microsoft Wolfpack) can use a shared SCSI of Fiber Channel disk storage array for failover communication. Information regarding Red Hat high availability solutions for Samba may be obtained from www.redhat.com. Linux High Availability project The Linux High Availability project is a resource worthy of consultation if your desire is to build a highly available Samba file server solution. Please consult the home page at www.linux-ha.org/. backend failures continuity of service Front-end server complexity remains a challenge for high availability because it must deal gracefully with backend failures, while at the same time providing continuity of service to all network clients. MS-DFS: The Poor Man's Cluster MS-DFS DFSMS-DFS, Distributed File Systems MS-DFS links can be used to redirect clients to disparate backend servers. This pushes complexity back to the network client, something already included by Microsoft. MS-DFS creates the illusion of a simple, continuous file system name space that works even at the file level. Above all, at the cost of complexity of management, a distributed system (pseudo-cluster) can be created using existing Samba functionality. Conclusions Transparent SMB clustering is hard to do! Client failover is the best we can do today. Much more work is needed before a practical and manageable high-availability transparent cluster solution will be possible. MS-DFS can be used to create the illusion of a single transparent cluster.