This parameter specifies a timeout in seconds for the connection between Samba and ctdb. It is only valid if you have compiled Samba with clustering and if you have set clustering=yes. When something in the cluster blocks, it can happen that we wait indefinitely long for ctdb, just adding to the blocking condition. In a well-running cluster this should never happen, but there are too many components in a cluster that might have hickups. Choosing the right balance for this value is very tricky, because on a busy cluster long service times to transfer something across the cluster might be valid. Setting it too short will degrade the service your cluster presents, setting it too long might make the cluster itself not recover from something severely broken for too long. Be aware that if you set this parameter, this needs to be in the file smb.conf, it is not really helpful to put this into a registry configuration (typical on a cluster), because to access the registry contact to ctdb is required. Setting ctdb timeout to n makes any process waiting longer than n seconds for a reply by the cluster panic. Setting it to 0 (the default) makes Samba block forever, which is the highly recommended default. 0